.200" (5.08mm) FXP FlexiPlug® HYBRID PLUGGABLE BLOCK Screw/Pressure-Plate Termination HYBRID TERMINAL BLOCK FXP FlexiPlug® hybrid terminal blocks combine U.S.-style standard screwdriver barrier-block wire terminations with a European-style pluggable block nose; and will mate with both Amphenol Pcd and competitive headers. FlexiPlugs can be used interchangeably with moving cage clamp style plugs, such as ELF, and both plug styles can be used in the same system. Screw/pressure-plate terminations enclosed in a tri-barrier configuration accept either a #2 Philips head or a 1/4" flat screwdriver and will accommodate up to two 12 AWG wires or ring- or fork-tongue terminals FLEXIPLUG OPTIONS Optional accessories and variations, outlined below, greatly expand the FXP application range and flexibility. Refer to the Part Number Guide on this page for catalog number and ordering guidance, or contact Amphenol Pcd. Locking Ears Integrally molded locking ears are available with all FlexiPlugs for use in high-stress or high-vibration applications, or where unintentional disconnect must be prevented. Plug ears hold a captive floating locking screw that engages a threaded insert in the ELFH header ear. Safety Cover Open Back Wall Plugs can be supplied with an open back wall on the upper row of contacts (see photo insert above). This facilitates fanning of wires in two directions during installation. Plating Plugs and mating ELFH headers are available with selective gold plating. Keying Standard ELF line keying tabs, as described on page 29, are applicable on the FXP as well. Marking FXP plugs are available with a variety of standard and special markings. Please contact the factory to discuss your requirements. Open Back Color The standard color for FXP series plugs is black. All FlexiPlugs are also available—with the same delivery commitment—in green. Protective Cover A clear protective “finger-proof” safety cover can be provided with the FlexiPlug. See photo above. Contact Amphenol Pcd for details. SPECIAL VARIATIONS In addition to the standard FlexiPlug product variations, Amphenol Pcd is a leading supplier of special block configurations and modifications, tailored to meet unusual system design requirements. The FXP screw clamp termination is suited for special I/O configurations. Please contact the factory for further discussions. For plugs with an even number of contact positions, one locking screw must be offset from the header by using the FXPAD adapter (see illustration above). Amphenol Pcd 42 Amphenol Pcd • 2 Technology Drive • Peabody, MA 01960 • www.amphenolpcd.com • 800.333.4723 • [email protected] FXP FlexiPlug® HYBRID PLUGGABLE BLOCK Screw/Pressure-Plate Termination FXP Even Pos # Pos Catalog # Black Catalog # Green 2 FXPT02200 FXPT022G0 4 6 8 FXP Uneven Pos # FXP Even Pos # w/ Ears .200" (5.08mm) FXP Uneven Pos # w/ Ears L (In.) Pos Catalog # Black Even Configuration w/ Ears Uneven Configuration w/ Ears .670 3 FXPT03200 FXPT032G0 0.870 2 FXPT02200E FXPT022G0E .840 3 FXPT03200E FXPT032G0E 1.040 FXPT04200 FXPT042G0 1.070 5 FXPT05200 FXPT052G0 1.270 4 FXPT04200E FXPT042G0E 1.240 5 FXPT05200E FXPT052G0E 1.440 FXPT06200 FXPT062G0 1.470 7 FXPT07200 FXPT072G0 1.670 6 FXPT06200E FXPT062G0E 1.640 7 FXPT07200E FXPT072G0E 1.840 Even Configuration Catalog # Green L (In.) Uneven Configuration Pos Catalog # Black Catalog # Green L (In.) Pos Catalog # Black Catalog # Green L (In.) FXPT08200 FXPT082G0 1.870 9 FXPT09200 FXPT092G0 2.070 8 FXPT08200E FXPT082G0E 2.040 9 FXPT09200E FXPT092G0E 2.240 10 FXPT10200 FXPT102G0 2.270 11 FXPT11200 FXPT112G0 2.470 10 FXPT10200E FXPT102G0E 2.440 11 FXPT11200E FXPT112G0E 2.640 12 FXPT12200 FXPT122G0 2.670 13 FXPT13200 FXPT132G0 2.870 12 FXPT12200E FXPT122G0E 2.840 13 FXPT13200E FXPT132G0E 3.040 14 FXPT14200 FXPT142G0 3.070 15 FXPT15200 FXPT152G0 3.270 14 FXPT14200E FXPT142G0E 3.240 15 FXPT15200E FXPT152G0E 3.440 16 FXPT16200 FXPT162G0 3.470 17 FXPT17200 FXPT172G0 3.670 16 FXPT16200E FXPT162G0E 3.640 17 FXPT17200E FXPT172G0E 3.840 18 FXPT18200 FXPT182G0 3.870 19 FXPT19200 FXPT192G0 4.070 18 FXPT18200E FXPT182G0E 4.040 19 FXPT19200E FXPT192G0E 4.240 20 FXPT20200 FXPT202G0 4.270 21 FXPT21200 FXPT212G0 4.470 20 FXPT20200E FXPT202G0E 4.440 21 FXPT21200E FXPT212G0E 4.640 22 FXPT22200 FXPT222G0 4.670 23 FXPT23200 FXPT232G0 4.870 22 FXPT22200E FXPT222G0E 4.840 24 FXPT24200 FXPT242G0 5.070 SPECIFICATIONS: MATERIALS: INSTALLATION: APPROVALS: Current Rating: 15A Operating Voltage: 300V Insulation Resistance: >105 Megohms Dielectric Withstanding: <3000V Wire Pullout Force: Per UL 486E, Section 14 Housing: PPO, UL 94V-0, Black or green Contact: Phosphor bronze, optional finish SEM Screw: M3, Steel, nickel finish Wire Range: 12-26 AWG Wire Strip Length: .250" Recommended Tightening Torque: 12 lb-in. (1.35N-m) Screwdriver: #2 Phillips, 1/4" blade Consult factory for specific product recognitions Amphenol Pcd Amphenol Pcd • 2 Technology Drive • Peabody, MA 01960 • www.amphenolpcd.com • 800.333.4723 • [email protected] 43 .200" (5.08mm) ELFH HEADERS with Locking Ears ELFH Horizontal—Eared ELFH SERIES HEADERS ELFH Series headers mate with ELF Series, FXP FlexiPlug and SCF spring clamp plugs; and accommodate competitive plugs as well. The headers are precision-molded from tough, stable PBT, providing additional strength and greater reliability under extreme conditions. Screwdriver slots at either end facilitate unplugging and eliminate the possibility of body damage. SMT Compatibility ELF headers are available in ultra-high-temperature, glassfilled polyamide, capable of withstanding temperatures of 260°C for three minutes while undergoing SMT reflow soldering. This eliminates the need for a separate header wave soldering operation if SMT is being employed in the board manufacturing process. See page 25 for instructions on how to order. Note: Available in black only. Locking and Mounting Ears Integrally molded locking ears are available with all ELFH headers. A threaded insert in the header ear is engaged by a plug mounting screw, which is tightened after plug and header are mated, securing the connection. Note: locking ears add a contact position per side to header length. An “E” is added to the catalog number to specify locking ears. Locking ears can also be used as mounting ears to secure the header to printed circuit boards or chassis, and are available as well with blank through-holes in the “vertical” orientation for custom mounting. Gold Plating: Indicate “1” as the last digit of catalog no. for black parts; “1G” in the last position for green parts. Consult PCD for assistance with locking-ear headers. Pos Catalog # Black Catalog # Green 2 ELFH02210E ELFH0221GE L (In.) Pos .80 3 ELFH03210E ELFH0321GE 1.00 Catalog # Black Catalog # Green 2 ELFH02250E ELFH0225GE L (In.) .80 3 ELFH03250E ELFH0325GE 1.00 4 ELFH04210E ELFH0421GE 1.20 4 ELFH04250E ELFH0425GE 1.20 5 ELFH05210E ELFH0521GE 1.40 5 ELFH05250E ELFH0525GE 1.40 6 ELFH06210E ELFH0621GE 1.60 6 ELFH06250E ELFH0625GE 1.60 7 ELFH07210E ELFH0721GE 1.80 7 ELFH07250E ELFH0725GE 1.80 8 ELFH08210E ELFH0821GE 2.00 8 ELFH08250E ELFH0825GE 2.00 9 ELFH09210E ELFH0921GE 2.20 9 ELFH09250E ELFH0925GE 2.20 10 ELFH10210E ELFH1021GE 2.40 10 ELFH10250E ELFH1025GE 2.40 11 ELFH11210E ELFH1121GE 2.60 11 ELFH11250E ELFH1125GE 2.60 12 ELFH12210E ELFH1221GE 2.80 12 ELFH12250E ELFH1225GE 2.80 13 ELFH13210E ELFH1321GE 3.00 13 ELFH13250E ELFH1325GE 3.00 14 ELFH14210E ELFH1421GE 3.20 14 ELFH14250E ELFH1425GE 3.20 15 ELFH15210E ELFH1521GE 3.40 15 ELFH15250E ELFH1525GE 3.40 16 ELFH16210E ELFH1621GE 3.60 16 ELFH16250E ELFH1625GE 3.60 17 ELFH17210E ELFH1721GE 3.80 17 ELFH17250E ELFH1725GE 3.80 18 ELFH18210E ELFH1821GE 4.00 18 ELFH18250E ELFH1825GE 4.00 19 ELFH19210E ELFH1921GE 4.20 19 ELFH19250E ELFH1925GE 4.20 20 ELFH20210E ELFH2021GE 4.40 20 ELFH20250E ELFH2025GE 4.40 21 ELFH21210E ELFH2121GE 4.60 21 ELFH21250E ELFH2125GE 4.60 22 ELFH22210E ELFH2221GE 4.80 22 ELFH22250E ELFH2225GE 4.80 Marking: See page 25 Accessories: Polarizing keys and marking labels. See page 29. APPROVALS: Contact factory for specific product recognition See page 25 for temperature, gold plating and marking options SPECIFICATIONS: MATERIALS: Current Rating: 15A Operating Voltage: 300V Insulation Resistance: >105 Megohms Dielectric Withstanding: <3000V Housing: PBT, UL 94V-0 (Standard) PA 4/6, UL 94V-0 (High temp) Black or green optional Contact: Copper alloy, optional finish Ear Insert, M2.5: Steel, nickel finish HEADER INSTALLATION: Amphenol Pcd 44 ELFH Vertical—Eared Hole Diameter: .055" min. Amphenol Pcd • 2 Technology Drive • Peabody, MA 01960 • www.amphenolpcd.com • 800.333.4723 • [email protected] .200" (5.08mm) ELFH HEADERS ELFH Horizontal—Closed Pos Catalog # Black Catalog # Green 2 ELFH02210 ELFH0221G 3 ELFH03210 ELFH0321G 4 ELFH04210 5 ELFH05210 6 ELFH06210 7 ELFH07210 8 9 ELFH Vertical—Closed L (In.) ELFH Horizontal—Open L (In.) ELFH Vertical—Open Pos Catalog # Black Catalog # Green .40 2 ELFH02250 ELFH0225G .60 3 ELFH03250 ELFH0325G ELFH0421G .80 4 ELFH04250 ELFH0425G .80 4 ELFH04220 ELFH0422G .80 4 ELFH04260 ELFH0426G .80 ELFH0521G 1.00 5 ELFH05250 ELFH0525G 1.00 5 ELFH05220 ELFH0522G 1.00 5 ELFH05260 ELFH0526G 1.00 ELFH0621G 1.20 6 ELFH06250 ELFH0625G 1.20 6 ELFH06220 ELFH0622G 1.20 6 ELFH06260 ELFH0626G 1.20 ELFH0721G 1.40 7 ELFH07250 ELFH0725G 1.40 7 ELFH07220 ELFH0722G 1.40 7 ELFH07260 ELFH0726G 1.40 ELFH08210 ELFH0821G 1.60 8 ELFH08250 ELFH0825G 1.60 8 ELFH08220 ELFH0822G 1.60 8 ELFH08260 ELFH0826G 1.60 ELFH09210 ELFH0921G 1.80 9 ELFH09250 ELFH0925G 1.80 9 ELFH09220 ELFH0922G 1.80 9 ELFH09260 ELFH0926G 1.80 10 ELFH10210 ELFH1021G 2.00 10 ELFH10250 ELFH1025G 2.00 10 ELFH10220 ELFH1022G 2.00 10 ELFH10260 ELFH1026G 2.00 11 ELFH11210 ELFH1121G 2.20 11 ELFH11250 ELFH1125G 2.20 11 ELFH11220 ELFH1122G 2.20 11 ELFH11260 ELFH1126G 2.20 12 ELFH12210 ELFH1221G 2.40 12 ELFH12250 ELFH1225G 2.40 12 ELFH12220 ELFH1222G 2.40 12 ELFH12260 ELFH1226G 2.40 13 ELFH13210 ELFH1321G 2.60 13 ELFH13250 ELFH1325G 2.60 13 ELFH13220 ELFH1322G 2.60 13 ELFH13260 ELFH1326G 2.60 14 ELFH14210 ELFH1421G 2.80 14 ELFH14250 ELFH1425G 2.80 14 ELFH14220 ELFH1422G 2.80 14 ELFH14260 ELFH1426G 2.80 15 ELFH15210 ELFH1521G 3.00 15 ELFH15250 ELFH1525G 3.00 15 ELFH15220 ELFH1522G 3.00 15 ELFH15260 ELFH1526G 3.00 16 ELFH16210 ELFH1621G 3.20 16 ELFH16250 ELFH1625G 3.20 16 ELFH16220 ELFH1622G 3.20 16 ELFH16260 ELFH1626G 3.20 17 ELFH17210 ELFH1721G 3.40 17 ELFH17250 ELFH1725G 3.40 17 ELFH17220 ELFH1722G 3.40 17 ELFH17260 ELFH1726G 3.40 18 ELFH18210 ELFH1821G 3.60 18 ELFH18250 ELFH1825G 3.60 18 ELFH18220 ELFH1822G 3.60 18 ELFH18260 ELFH1826G 3.60 19 ELFH19210 ELFH1921G 3.80 19 ELFH19250 ELFH1925G 3.80 19 ELFH19220 ELFH1922G 3.80 19 ELFH19260 ELFH1926G 3.80 Pos Catalog # Black Catalog # Green .40 2 ELFH02220 ELFH0222G .60 3 ELFH03220 ELFH0322G L (In.) Pos Catalog # Black Catalog # Green L (In.) .40 2 ELFH02260 ELFH0226G .40 .60 3 ELFH03260 ELFH0326G .60 20 ELFH20210 ELFH2021G 4.00 20 ELFH20250 ELFH2025G 4.00 20 ELFH20220 ELFH2022G 4.00 20 ELFH20260 ELFH2026G 4.00 21 ELFH21210 ELFH2121G 4.20 21 ELFH21250 ELFH2125G 4.20 21 ELFH21220 ELFH2122G 4.20 21 ELFH21260 ELFH2126G 4.20 22 ELFH22210 ELFH2221G 4.40 22 ELFH22250 ELFH2225G 4.40 22 ELFH22220 ELFH2222G 4.40 22 ELFH22260 ELFH2226G 4.40 23 ELFH23210 ELFH2321G 4.60 23 ELFH23250 ELFH2325G 4.60 23 ELFH23220 ELFH2322G 4.60 23 ELFH23260 ELFH2326G 4.60 24 ELFH24210 ELFH2421G 4.80 24 ELFH24250 ELFH2425G 4.80 24 ELFH24220 ELFH2422G 4.80 24 ELFH24260 ELFH2426G 4.80 See page 25 for temperature, gold plating and marking options MATERIALS: SPECIFICATIONS: Housing: PBT, UL 94V-0 (Standard) PA 4/6, UL 94V-0 (High temp) Black (Green option standard only) Contact: Copper alloy, optional finish Current Rating: 15A Operating Voltage: 300V Insulation Resistance: >105 Megohms Dielectric Withstanding: <3000V APPROVALS: Contact factory for specific product recognition HEADER INSTALLATION: Hole Diameter: .055" min. Amphenol Pcd Amphenol Pcd • 2 Technology Drive • Peabody, MA 01960 • www.amphenolpcd.com • 800.333.4723 • [email protected] 45