T 1-3/4 (5 mm) Panel Mount Led Assembly G70B, G71B and G703B Series These panel mount assemblies are designed to snap into a nominal 1/4” hole from the front of the panel. The G70B and G703B have wires attached. These wires are UL 1061, 26 AWG, PVC insulated multi-strand wire with 3 mm ends stripped & tinned. The G70B is two-leaded and comes in all variations of dice and color, including bi-color (2 dice mounted back-to-back). The G703B incorporates a three-leaded LED with two dice in a common cathode configuration. It is available either as Red/Green, EG, or as Yellow/Green, YG. Series resistors can be added for operation at non-standard voltages. 1.5x4.5x0.2 3 pls AAAAAAAAAAAAA AAAAAAAAAAAAA 7.1 dia 5.0 dia G70B(2-leaded) or G703B(3-leaded) 0.8 4.2 ±.5 6.1 dia L = total length of wire 11.3 Black G71B Anode Red G70B schematic 1.0 min Color 15.0 min Black Color G703B schematic Specify part desired as follows: G70B/Order Code-L (Wire length in inches; 6" and 24" are standard) G71B/Order Code; G703B/EG or YG-L. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Typical Characteristics Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If=10mA (Deg) Recom. Op. If (mA) Epoxy & Type Color Order Code Red H 697 2.1 2.0 36 5-10 TInted Diffused Resistor Required Hi Eff Red I 635 2.0 9.0 36 10-20 Green G 565 2.1 9.0 36 10-20 Yellow Y 585 2.0 7.0 36 10-20 Tinted Transparent High Brightness Tinted Diffused For 2mA Operation Tinted Diffused 5V Operation Tinted Diffused 12V Operation White Diffused Bipolar, Bicolor Hi Eff Red IT 635 2.0 30 16 10-20 Green GT 565 2.1 30 16 10-20 Yellow YT 585 2.0 28 16 10-20 Red H2 697 2.0 1.6 @ 2mA 36 2-10 Hi Eff Red I2 635 2.1 2.0 @ 2mA 36 2-10 Green G2 565 2.0 2.0 @ 2mA 36 2-10 Yellow Y2 585 2.0 2.0 @ 2mA 36 2-10 Hi Eff Red I5 635 - 4.5 36 5V Green G5 565 - 4.5 36 5V Yellow Y5 585 - 4.5 36 5V Hi Eff Red IB 635 - 4.5 36 12 V Green GB 565 - 4.5 36 12 V Yellow YB 585 - 4.5 36 12 V Hi Eff Red/Grn EG 635/565 2.1/2.0 2.5/2.5 54 10-20 Yellow/Green YG 585/565 2.1/2.0 2.5/2.5 54 10-20 Red/Green SG 660/570 1.8/2.2 6.0/2.5 - 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A A-48