!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf Oct.1,2012 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Explanation of Symbols in This Catalog Derating Voltage and temperature derating recommended product This product is suitable when a voltage continuously applied to a capacitor in an operating circuit, is used below (derated) the rated voltage of the capacitor. This model guarantees the test conditions in the endurance test, at a rated voltage x 100% at the maximum operating temperature. A reliability assurance level equivalent to a common product can be secured, by using this product within the voltage and temperature derated conditions recommended in the figure below. Low dissipation for high frequency HiQ By devising ceramic materials and electrode materials, low dissipation is achieved in frequency bands of VHF, UHF and microwave or beyond. Low ESL Low inductance This capacitor is designed so that the parasitic inductance component (ESL) that the capacitor has on the high frequency side becomes lower. Anti- Product suitable for acoustic noise reduction and low distortion noise This product suppresses acoustic noise, which occurs when a ceramic capacitor is used, by devising the materials and configuration. Deflecting Product resistant to deflection cracking crack This capacitor is designed to prevent failures as much as possible by short mode caused by cracking when there is board deflection. Soldering Product with solder cracking suppression crack This capacitor is configured with metal terminals s Recommended Conditions of the Derating Operating Voltage and Temperature Operating Voltage/Rated Voltage (%) Ultra- L x W dimension: products of 0.6 x 0.3 mm or less compact 120 100 125°C Type 105°C Type 85°C Type 80 60 40 20 0 0 25 50 75 100 Product Temperature (°C) and leads connected to the chip. The metal terminals and leads relieve the stress from expansion and contraction of the solder, to suppress solder cracking. s All EU RoHS Compliant the products in this catalog comply with EU RoHS. RoHS is "the European Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment." s For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). s EU For General Purpose Pur ose e GRM Series Capacitance Table 125 150 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Contents Oct.1,2012 Chip Monolithic Ceramic Capacitors (Medium Voltage) Cap. Table For General Purpose GRM (250Vdc min.)/GRJ/GR3 Series Product specifications ecifications are as of July 2012. Selection Guide p2 Capacitance Table p3 Part Numbering Temperature Compensating Type GRM Series (250Vdc min.) High Dielectric Constant Type GRM Series (250Vdc min.) Soft Termination Type GRJ Series Large Capacitance and High Allowable Ripple Current GR3 Series p136 separate volume p143 separate volume p148 p11 p153 p11 p158 p161 p165 p12 p12 p12 AC250V Type (Which Meet Japanese Law) GA2 Series p169 p12 Only for Applications p15 For LCD Backlight Inverter Circuit GRM/DC3.15kV Series For Information Devices GR4 Series For Camera Flash Circuit GR7 Series Chip Monolithic Ceramic Capacitors Cap. Table For General Purpose GRM Series (Less than 250Vdc) p21 separate volume Safety Standard Certified GA3 Series UL, IEC60384-14 Class X1/Y2 Type GC IEC60384-14 Class Y2, X1/Y2 Type GF IEC60384-14 Class Y3 Type GD IEC60384-14 Class X2 Type GB Capacitor Array GNM Series p76 p4 Low ESL LLL/LLR/LLA/LLM Series p79 p5 Reference Data (Typical Example) Package !Caution/Notice High-Q Type GJM Series p82 p7 Metal Terminal Monolithic Ceramic Capacitors p173 p174 p176 p177 p13 p13 p13 p13 p182 p185 p188 Cap. Table High Frequency GQM Series p104 p8 For General Purpose KRM/KR3 Series High Capacitance for General Use KRM Series Large Capacitance and High Allowable Ripple Current KR3 Series Monolithic Microchip GMA Series p113 p115 p118 p204 p14 p208 p210 p10 ISO 9001 Certifications p215 Introduction of WEB SimSurfing p216 EMICON-FUN! !Caution/Notice p14 p9 Package !Caution/Notice For Bonding GMD Series p200 p217 Product Information p218 Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog. C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Selection Guide For Chip Monolithic Ceramic Capacitors Function Type High Capacitance Series GRM (X5R, X7R, Y5V etc.) 68pF–150μF Decoupling, Smoothing Array (2 or 4 Elements) GNM 470pF–2.2μF GRM (C0G) Frequency Control/Tuning, Impedance Matching 0.1pF–0.1μF Class 1 TC's GRM (U2J etc.) High Speed Decoupling Low Inductance (Reverse Geometry) 2200pF–10μF Low Inductance (Controlled ESR) 1.0μF Low Inductance (Multi-Termination) Low ESR, Ultra Small LLL LLR LLA/LLM (From 1GHz) 0.01μF–4.7μF GJM (500MHz to 10GHz) 0.1pF–47pF High Frequency Applications? Lowest ESR GQM (500MHz to 10GHz) 0.1pF–100pF Optical Communications Wire-Die-Bonding GMA 100pF–0.47μF GMD 100pF–0.47μF 250Vdc min. High-Frequency Snubber 250V/630V/1kV/2kV/3.15kV Low Dissipation GRM (C0G, U2J) 250Vdc min. LCD Backlight Inverter 3.15kV Low Dissipation GRM (C0G) 250V/630V/1kV High Capacitance GRM (X7R) 250V/630V/1kV Soft Termination GRJ (X7R) 250Vdc min. Decoupling, Smoothing 250Vdc min. For Camera Flash Circuit only 250Vdc min. For Information Devices only 10pF–47000pF 5pF–47pF 220pF–1μF 470pF–1μF 250V/450V/630V Large Capacitance and High Allowable Ripple Current 10000pF–1μF 350V High Capacitance 10000pF–47000pF 2kV High Capacitance 100pF–10000pF Safety Standard Certified Type GD 10pF–4700pF Type GF 10pF–4700pF Safety Standard Certified Type GC 100pF–330pF Type GF 470pF–4700pF Type GB 10000pF–56000pF AC250V which meets Japanese Law 470pF–0.1μF GR3 (X7T) GR7 GR4 AC Lines Noise Removal Automotive (Powertrain, Safety Equipment) 250Vdc min. for Automotive (Powertrain, Safety Equipment) 2 High Capacitance Class 1 TC's GA2 GCM (X7R etc.) 100pF–47μF GCM (C0G etc.) 1.0pF–56000pF 250V/630V/1kV Low Dissipation 10pF–47000pF 250V/630V Soft Termination 1000pF–0.47μF GCM (U2J) GCJ (X7R) C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Capacitance Table o Temperature Characteristics Table Temperature Characteristic Codes Temperature Characteristics Public STD Code Reference Temperature Capacitance Change or Temperature Temperature Range Coefficient Operating Temperature Range Capacitance Change Each Temperature (%) –55°C –25°C –10°C Max. Min. Max. Min. Max. Min. C0G EIA 25°C 25 to 125°C 0±30ppm/°C –55 to 125°C 0.58 –0.24 0.4 –0.17 0.25 –0.11 C0H EIA 25°C 25 to 125°C 0±60ppm/°C –55 to 125°C 0.87 –0.48 0.59 –0.33 0.38 –0.21 –0.75 CK JIS 20°C 20 to 125°C 0±250ppm/°C –55 to 125°C 2.56 –1.88 1.54 –1.13 1.02 CJ JIS 20°C 20 to 125°C 0±120ppm/°C –55 to 125°C 1.37 –0.9 0.82 –0.54 0.55 –0.36 CH JIS 20°C 20 to 125°C 0±60ppm/°C –55 to 125°C 0.82 –0.45 0.49 –0.27 0.33 –0.18 SL JIS 20°C 20 to 85°C +350 to –1000ppm/°C –55 to 125°C - - - - - - P2H EIA 25°C 25 to 85°C –150±60ppm/°C –55 to 125°C 2.33 0.72 1.61 0.5 1.02 0.32 PK JIS 20°C 20 to 85°C –150±250ppm/°C –25 to 85°C - - 2.36 –0.45 1.57 –0.3 PJ JIS 20°C 20 to 85°C –150±120ppm/°C –25 to 85°C - - 1.65 0.14 1.1 0.09 PH JIS 20°C 20 to 85°C –150±60ppm/°C –25 to 85°C - - 1.32 0.41 0.88 0.27 R2H EIA 25°C 25 to 85°C –220±60ppm/°C –55 to 125°C 3.02 1.28 2.08 0.88 1.32 0.56 RK JIS 20°C 20 to 85°C –220±250ppm/°C –25 to 85°C - - 2.74 –0.14 1.83 –0.09 RJ JIS 20°C 20 to 85°C –220±120ppm/°C –25 to 85°C - - 2.03 0.45 1.35 0.3 RH JIS 20°C 20 to 85°C –220±60ppm/°C –25 to 85°C - - 1.7 0.72 1.13 0.48 S2H EIA 25°C 25 to 85°C –330±60ppm/°C –55 to 125°C 4.09 2.16 2.81 1.49 1.79 0.95 SK JIS 20°C 20 to 85°C –330±250ppm/°C –25 to 85°C - - 3.35 0.36 2.23 0.24 SJ JIS 20°C 20 to 85°C –330±120ppm/°C –25 to 85°C - - 2.63 0.95 1.76 0.63 –330±60ppm/°C –25 to 85°C - - 2.3 1.22 SH JIS 20°C 20 to 85°C 1.54 0.81 T2H EIA 25°C 25 to 85°C –470±60ppm/°C –55 to 125°C 5.46 3.28 3.75 2.26 2.39 1.44 TK JIS 20°C 20 to 85°C –470±250ppm/°C –25 to 85°C - - 4.12 0.99 2.74 0.66 TJ JIS 20°C 20 to 85°C –470±120ppm/°C –25 to 85°C - - 3.4 1.58 2.27 1.05 TH JIS 20°C 20 to 85°C –470±60ppm/°C –25 to 85°C - - 3.07 1.85 2.05 1.23 U2J EIA 25°C 25 to 125°C –750±120ppm/°C –55 to 125°C 8.78 5.04 6.04 3.47 3.84 2.21 UK JIS 20°C 20 to 85°C –750±250ppm/°C –25 to 85°C - - 5.65 2.25 3.77 1.5 UJ JIS 20°C 20 to 85°C –750±120ppm/°C –25 to 85°C - - 4.94 2.84 3.29 1.89 X7R EIA 25°C –55 to 125°C ±15% –55 to 125°C - - - - - - X7S EIA 25°C –55 to 125°C ±22% –55 to 125°C - - - - - - X7T EIA 25°C –55 to 125°C +22%, –33% –55 to 125°C - - - - - - - - X7U EIA 25°C –55 to 125°C +22%, –56% –55 to 125°C - - - - R JIS 20°C –55 to 125°C ±15% –55 to 125°C - - - - - - X6S EIA 25°C –55 to 105°C ±22% –55 to 105°C - - - - - - X6T EIA 25°C –55 to 105°C +22%, –33% –55 to 105°C - - - - - - X5R EIA 25°C –55 to 85°C ±15% –55 to 85°C - - - - - - –55 to 85°C - - - - X5S EIA 25°C –55 to 85°C ±22% - - B JIS 20°C –25 to 85°C ±10% –25 to 85°C - - - - - - 25°C –55 to 125°C ±10% –55 to 125°C - - - - - - -: Murata Temperature Characteristic c GRM Series Chip Monolithic Ceramic Capacitors For General Purpose GRM Series Capacitance Tabl Table l le For the Capacitance Table of General Purpose GRM Series, please review the inserted Capacitance Table of "Chip Monolithic Ceramic Capacitor and General Purpose GRM Series". 3 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. c GRM Series Temperature Compensating Type p00 ← Part Number List CK JIS: EIA: C0G L×W (mm) T max. (mm) Cap. / TC Code C0G CH SL PK PJ P2H R2H S2H T2H U2J PH 0.4×0.2 0.6×0.3 0.22 0.33 16 Rated Voltage (Vdc) CJ 10 CΔ C0G 50 CH C0G CΔ RK RJ RH SK SJ R2H RΔ S2H TK TJ TH UK UJ 1.0×0.5 0.33 25 UΔ SH SΔ 0.55 50 T2H TΔ UJ 50 C0G CΔ C0G CΔ p38 p39 p42 P2H PΔ R2H RΔ p28 p32 p36 0.2pF p22 p25 p28 p32 p36 p38 p39 p42 0.5pF p22 p25 p28 p32 p36 p38 p39 p42 1.0pF p22 p25 p28 p32 p35 p35 p35 p35 p36 p36 p36 p37 p38 p39 p42 p46 p46 p46 p46 2.0pF p22 p25 p29 p32 p35 p35 p35 p36 p36 p36 p36 p37 p38 p39 p43 p46 p46 p46 p46 p32 p35 p35 p35 p36 p36 p36 p36 p37 p38 p39 p43 p46 p46 p46 p46 0.1pF 3.0pF p22 p25 p29 4.0pF p23 p26 p29 p33 p35 p35 p35 p36 p36 p36 p36 p37 p38 p40 p43 p46 p46 p46 p46 5.0pF p23 p26 p30 p33 p35 p35 p35 p36 p36 p36 p36 p37 p38 p40 p44 p46 p46 p46 p46 6.0pF p23 p26 p30 p33 p35 p35 p35 p36 p36 p36 p36 p37 p38 p40 p44 p46 p46 p46 p46 7.0pF p24 p27 p30 p34 p35 p35 p35 p36 p36 p36 p36 p37 p38 p41 p44 p46 p46 p46 p46 8.0pF p24 p27 p31 p34 p35 p35 p35 p36 p36 p36 p36 p37 p38 p41 p45 p46 p46 p46 p46 p41 p45 9.0pF p24 p28 p31 p34 p35 p35 p35 p36 p36 p36 p36 p37 p38 p46 p46 p46 p46 10pF p25 p28 p31 p35 p35 p35 p35 p36 p36 p36 p36 p37 p38 p42 p45 p46 p46 p46 p46 12pF p25 p28 p31 p35 p35 p35 p35 p36 p36 p36 p36 p37 p39 p42 p45 p46 p46 p46 p46 15pF p25 p28 p31 p35 p35 p35 p35 p36 p36 p36 p36 p37 p39 p42 p45 p46 p46 p46 p46 18pF p25 p28 p31 p35 p35 p35 p36 p36 p36 p36 p36 p37 p39 p42 p45 p46 p46 p46 p46 p36 p36 p36 p37 p39 p42 p45 p46 p46 p46 p46 p46 p46 p46 p46 p46 p46 22pF p25 p28 p31 p35 p35 p35 p36 p36 27pF p25 p28 p31 p35 p35 p35 p36 p36 p36 p36 p36 p37 p39 p42 p46 33pF p25 p28 p31 p35 p35 p35 p36 p36 p36 p36 p36 p37 p39 p42 p46 39pF p25 p28 p32 p35 p35 p35 p36 p36 p36 p36 p36 p37 p39 p42 p46 47pF p25 p28 p32 p35 p35 p35 p36 p36 p36 p36 p36 p37 p39 p42 p46 p35 p35 p35 p36 p36 p36 p36 p36 p37 p39 p42 p46 56pF p28 p28 p32 68pF p28 p28 p32 p35 p35 p35 p36 p36 p36 p36 p36 p37 p39 p42 p46 82pF p28 p28 p32 p35 p35 p35 p36 p36 p36 p36 p36 p37 p39 p42 p46 100pF p28 p28 p32 p35 p35 p35 p36 p36 p36 p36 p36 p37 p39 p42 p46 120pF p37 p39 p42 p46 150pF p37 p39 p42 p46 p38 p39 p42 p46 p38 p39 p42 p46 p38 p39 p42 p46 p38 p39 p42 p46 390pF p38 p39 p42 p46 470pF p38 p39 p42 p46 560pF p38 p39 p42 p46 680pF p38 p39 p42 p46 820pF p42 p46 1000pF p42 p46 180pF 220pF 270pF 330pF separate volume 1 The indication for every 0.1 pF has been omitted for less than 10 pF. Refer to the Part Number List for details. C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. (→ c GRM Series Temperature Compensating Type) p00 ← Part Number List JIS: CK EIA: C0G CJ CH SL PK PJ P2H R2H S2H T2H U2J PH RK RJ RH SK 1.0×0.5 L×W (mm) Cap. / TC Code S2H 10 SΔ T2H TΔ UΔ TK 0.5 50 Rated Voltage (Vdc) SH TJ SL U2J UJ SL U2J 10 UJ SL U2J 100 UJ CΔ C0G CΔ p48 p51 p55 p58 p48 p51 p55 p58 p48 p52 p55 p58 p49 p52 p55 p59 p49 p52 p55 p59 p46 p47 p47 p47 p47 2.0pF p46 p47 p47 p47 p47 3.0pF p46 p47 p47 p47 p47 4.0pF p46 p47 p47 p47 p47 5.0pF p46 p47 p47 p47 p47 p49 p52 p56 p59 6.0pF p46 p47 p47 p47 p47 p49 p53 p56 p59 p47 p50 p53 p56 p60 p60 p47 p47 p47 UJ SL U2J UJ SL 50 C0G 1.0pF p47 UK 0.9 50 0.5pF 7.0pF TH 1.6×0.8 0.55 T max. (mm) SJ The indication for every 0.1 pF has been omitted for less than 10 pF. Refer to the Part Number List for details. 8.0pF p47 p47 p47 p47 p47 p50 p54 p57 9.0pF p47 p47 p47 p47 p47 p51 p54 p57 p61 10pF p47 p47 p47 p47 p47 p51 p54 p58 p61 12pF p47 p47 p47 p47 p47 p51 p54 p58 p61 15pF p47 p47 p47 p47 p47 p51 p54 p58 p61 18pF p47 p47 p47 p47 p47 p51 p54 p58 p61 22pF p47 p47 p47 p47 p47 p51 p54 p58 p61 27pF p47 p47 p47 p47 p47 p51 p54 p58 p61 33pF p47 p47 p47 p47 p47 p51 p54 p58 p61 39pF p47 p47 p47 p47 p47 p51 p54 p58 p61 47pF p47 p47 p47 p51 p54 p58 p61 56pF p47 p47 p47 p51 p54 p58 p61 68pF p47 p47 p47 p51 p54 p58 p61 p54 p58 p61 10 82pF p47 p47 p47 p51 100pF p47 p47 p47 p51 p54 p58 p61 120pF p47 p51 p54 p58 p61 150pF p47 p51 p54 p58 p61 180pF p47 p51 p54 p58 p61 220pF p51 p54 p58 p61 270pF p51 p54 p58 p61 330pF p51 p54 p58 p61 390pF p51 p54 p58 p61 470pF p51 p54 p58 p61 560pF p51 p54 p58 p61 680pF p51 p54 p58 p61 820pF p51 p54 p58 p61 1000pF p51 p54 p58 p61 1200pF p51 p54 p58 p61 p61 p61 p61 p58 p61 p61 p61 p61 p47 p47 p48 p51 p55 p61 1500pF p47 p47 p48 1800pF p47 p47 p48 p58 p61 p61 p61 p61 2200pF p47 p48 p48 p48 p48 p48 p58 p61 p61 p61 p61 2700pF p47 p48 p48 p48 p48 p48 p58 p61 p61 p61 p61 3300pF p47 p48 p48 p48 p48 p48 p58 p61 p61 p61 p61 3900pF p47 p48 p48 p48 p48 p48 p58 p61 p61 p61 p61 4700pF p47 p48 p48 p48 p48 p48 p61 p61 p61 5600pF p48 p48 p48 p61 p61 p62 6800pF p48 p48 p48 p61 p61 p62 8200pF p48 p48 p48 p61 p61 p62 10000pF p48 p48 p48 p61 p61 p62 12000pF p62 15000pF p62 18000pF p62 22000pF p62 separate volume 2 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. (→ c GRM Series Temperature Compensating Type) p00 ← Part Number List CK JIS: EIA: C0G L×W (mm) CJ CH SL PK PJ P2H R2H S2H T2H U2J PH RK 1.6×0.8 T max. (mm) 0.9 Rated Voltage (Vdc) 10 Cap. / TC Code U2J RJ SK SJ SH TK TJ TH UK UJ 2.0×1.25 0.7 100 UJ RH C0G CH 0.95 50 C0G CH SL 1 50 U2J UJ C0G CH SL 10 U2J UJ SL U2J 250 UJ C0G U2J 10pF p136 12pF p136 15pF p136 18pF p136 22pF p136 27pF p136 33pF p136 39pF p136 47pF p136 56pF p136 68pF p136 82pF 50 SL U2J UJ p62 p62 p63 p136 100pF p62 p62 p136 p137 120pF p62 p62 p136 p137 150pF p62 p62 p136 p137 180pF p62 p62 p136 p137 220pF p62 p62 p136 p137 270pF p62 p62 p136 p137 330pF p62 p62 p136 p137 390pF p62 p62 p137 470pF p62 p62 p137 560pF p62 p62 p137 680pF p62 p62 p137 820pF p62 p62 p137 1000pF p62 p62 1200pF p62 p62 p62 p62 p138 1500pF p62 p62 p62 p62 p138 1800pF p62 p62 p62 p62 p138 2200pF p62 p62 p62 p62 p138 2700pF p62 p62 p62 p62 3300pF p62 p62 p137 p62 p62 3900pF p62 p62 4700pF p62 p62 5600pF p62 p62 6800pF p62 p62 8200pF p62 p62 p62 p62 p62 10000pF 12000pF p62 p62 p62 p62 p62 p62 p62 15000pF p62 p62 p62 p62 p62 p62 p62 18000pF p62 p62 p62 p62 p62 22000pF p62 p62 27000pF p62 p62 p62 p62 p62 p62 33000pF 39000pF 47000pF 56000pF separate volume 3 p62 p62 p62 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. (→ c GRM Series Temperature Compensating Type) p00 ← Part Number List JIS: CK EIA: C0G CJ CH SL PK PJ P2H R2H S2H T2H U2J PH RK RJ RH SK SJ 2.0×1.25 L×W (mm) 1.45 50 Rated Voltage (Vdc) Cap. / TC Code C0G CH SL 10 U2J UJ TK TJ TH UK UJ 3.2×1.6 1.35 T max. (mm) SH SL U2J 250 UJ 0.95 100 U2J C0G CH 1 50 C0G CH SL 2000 U2J UJ 1000 630 U2J C0G U2J C0G U2J 10pF p139 p137 p139 p136 p138 12pF p139 p137 p139 p136 p138 15pF p139 p137 p139 p136 p138 18pF p139 p137 p139 p136 p138 22pF p139 p137 p139 p137 p138 27pF p139 p137 p139 p137 p138 33pF p139 p137 p139 p137 p138 39pF p139 p137 p139 p137 p138 47pF p139 p137 p139 p137 p138 56pF p139 p137 p139 p137 p138 68pF p139 p137 p139 p137 p138 82pF p137 p139 p137 p138 100pF p137 p139 p137 p138 120pF p137 p139 p137 p138 150pF p137 p139 p137 p138 180pF p137 p139 p137 p138 220pF p137 p139 p137 p138 270pF p139 p137 p138 330pF p139 p137 p138 390pF p137 p138 470pF p137 p138 560pF p137 p138 680pF p138 820pF p138 1000pF p138 1200pF p138 1500pF p138 1800pF p63 p63 p138 2200pF p63 p63 p138 250 U2J 2700pF p138 p63 p63 p138 3300pF p138 p63 p63 p138 3900pF p138 p63 p63 p138 4700pF p138 p63 p63 p138 5600pF p138 p63 p63 p138 6800pF p63 p63 8200pF p63 p63 10000pF p63 p63 12000pF p63 p63 p63 p63 15000pF p63 p63 p63 p63 18000pF p63 p63 p63 p63 p63 p63 22000pF p63 p63 p63 p63 p63 p63 27000pF p63 p63 33000pF p63 p63 p63 p63 39000pF p63 p63 p63 47000pF p63 p63 p63 56000pF p63 68000pF p63 p63 p63 82000pF p63 p63 p63 0.1μF p63 p63 p63 p63 p63 separate volume 4 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. (→ c GRM Series Temperature Compensating Type) p00 ← Part Number List JIS: CK EIA: C0G CJ CH SL PK PJ P2H R2H S2H T2H U2J Cap. / TC Code U2J RK RJ RH SK SJ SH 3.2×1.6 L×W (mm) 630 C0G U2J 1.8 250 50 U2J C0G CH SL TK TJ TH UK UJ 3.2×2.5 1.25 T max. (mm) Rated Voltage (Vdc) 1000 PH 1000 630 U2J UJ U2J 1 1.5 2 2000 630 2000 1000 630 1000 630 1000 630 50 U2J C0G 1.25 CH U2J 82pF p140 100pF p140 120pF p140 150pF p140 U2J U2J 180pF p140 220pF p140 U2J U2J U2J U2J U2J U2J 270pF 330pF 390pF p139 470pF p139 560pF p139 680pF p139 p137 820pF p137 p139 1000pF p137 p139 1200pF p138 1500pF p138 1800pF p138 p139 2200pF p138 p139 2700pF p138 3300pF p138 3900pF p138 4700pF p138 5600pF p139 p139 p138 6800pF p138 8200pF p138 p138 10000pF p138 p139 p138 12000pF 15000pF 18000pF 22000pF 27000pF 33000pF 39000pF 47000pF p63 p63 56000pF p63 p63 68000pF p63 p63 p63 p63 p63 82000pF p63 p63 p63 p63 p63 0.1μF p63 p63 p63 p63 p63 separate volume 5 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. (→ c GRM Series Temperature Compensating Type) p00 ← Part Number List JIS: CK EIA: C0G L×W (mm) 4.5× 2.0 T max. (mm) 1 CH SL PK PJ P2H R2H S2H T2H U2J 4.5×3.2 1.5 Rated Voltage (Vdc) 3150 1000 Cap. / TC Code U2J CJ U2J PH RK RJ RH SK SJ SH TK TJ TH UK UJ 5.7×5.0 2 1.5 2 630 1000 630 1000 630 1000 630 U2J U2J U2J U2J U2J U2J U2J 27pF p140 33pF p140 39pF p140 47pF p140 56pF p140 68pF p140 82pF p140 100pF p140 120pF 150pF 180pF 220pF 270pF 330pF 390pF 470pF 560pF 680pF 820pF 1000pF 1200pF 1500pF 1800pF 2200pF 2700pF p139 3300pF p139 3900pF p139 4700pF p139 5600pF p139 6800pF p139 8200pF p139 10000pF p139 12000pF p139 15000pF p139 18000pF p139 22000pF p139 27000pF p139 33000pF p139 39000pF p139 47000pF p139 separate volume 6 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. c GRM Series High Dielectric Constant Type p00 ← Part Number List L×W (mm) T max. (mm) JIS: B EIA: X7R X7S X7T X7U 0.4×0.2 0.6×0.3 0.22 0.33 10 Rated Voltage (Vdc) R 6.3 4 Cap. / TC Code X7R X5R, B X5R, B X5R 50 X7R 25 B 16 p64 p64 p64 100pF p64 p64 p64 p65 p65 p65 p65 p65 p65 150pF p64 p64 p64 p65 p65 p65 p65 p65 p65 220pF p64 p64 p64 p65 p65 p65 p65 p65 p65 330pF p64 p64 p64 p65 p65 p65 p65 p65 p65 470pF p64 p64 p64 p65 p65 p65 p65 p65 p65 680pF p64 p64 p64 p64 p65 p65 p65 p65 p65 p65 1000pF p64 p64 p64 p64 p65 p65 p65 p65 p65 p65 1500pF p64 p64 p64 p64 p65 p65 p65 p65 p65 2200pF p64 p64 p64 p64 p65 p65 p65 p65 p65 3300pF p64 p64 p64 p64 p65 p65 p65 p65 p65 4700pF p64 p64 p64 p64 6800pF p64 p64 p64 p64 10000pF p64 p64 p64 p64 X5S 1.0×0.5 0.22 10 6.3 4 10 6.3 2.5 4 X6Δ X7T p66 p66 p66 p67 p67 p67 p67 p67 p66 p66 p66 p67 p67 p67 p67 p67 p67 p66 p65 p65 p66 p66 p66 p66 p65 p65 p66 p65 p65 p65 p65 p66 p66 p66 p66 p66 p66 p66 p66 p64 p66 p66 p64 18000pF p66 p66 p66 p66 p66 p64 p66 p66 p64 27000pF 33000pF X5R p65 p65 p65 p66 p66 p66 12000pF 22000pF X6T X7R, R X5R, B X7R, R X5R, B X7R, R X5R, B X7R, R X6S X5R, B X6S X5R, B X6S X5R, B X7T 68pF 15000pF X6S p66 p66 p66 p66 p66 p64 p66 p66 p64 39000pF p66 p66 p66 p66 p66 47000pF p64 p64 68000pF p64 p64 0.1μF p64 p64 p65 p65 p66 p66 p66 p66 p66 p66 p66 p66 p66 p66 p66 p66 p66 0.15μF 0.22μF p66 0.33μF 0.47μF 0.68μF 1.0μF 2.2μF 4.7μF 10μF 22μF 47μF 100μF 150μF separate volume 7 p67 p67 p67 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. (→ c GRM Series High Dielectric Constant Type) p00 ← Part Number List R JIS: B EIA: X7R X7S X7T X6S X6T X5R X5S 1.0×0.5 L×W (mm) 0.33 0.3 T max. (mm) Rated Voltage (Vdc) X7U 50 Cap. / TC Code X7R, R 25 B X7R 10 16 B X7R B 10 6.3 X5R X5R, B X6T X5R, B X6T 0.55 4 100 50 25 16 10 X5R X7R X7Δ, R X6S X5R, B X7R, R X6S X5R, B X7R, R X5R, B X7R, R 68pF 100pF 150pF 220pF p67 p67 p67 p67 p67 p68 p68 330pF p67 p67 p67 p67 p67 p68 p68 470pF p67 p67 p67 p67 p67 p68 p68 680pF p67 p67 p67 p67 p67 p68 p68 1000pF p67 p67 p67 p67 p67 p68 p68 p68 1500pF p67 p67 p67 2200pF p67 p67 p67 p67 p68 p68 p67 p67 p68 p68 p68 3300pF p67 p67 p67 p67 p68 p68 4700pF p67 p67 p67 p67 p68 p68 p68 6800pF p67 p67 p67 p68 p68 p68 p68 p68 10000pF p67 p67 p67 p68 p68 p68 p68 p68 p67 p67 p68 p68 p68 p68 p67 p67 p68 p68 p68 p68 p67 p67 p68 p68 p68 p68 p68 p68 p68 p69 47000pF p68 p68 p68 p68 p68 p68 p68 p68 p69 68000pF p68 p68 0.1μF p68 p68 p68 p68 p68 p68 12000pF 15000pF 18000pF 22000pF 27000pF 33000pF 39000pF p68 p68 p68 p68 p68 p68 p69 p69 p69 p68 p68 p68 0.15μF p68 0.22μF p68 0.33μF 0.47μF 0.68μF 1.0μF p67 p67 p67 p67 p67 p67 p67 p68 p68 p69 p69 2.2μF 4.7μF 10μF 22μF 47μF 100μF 150μF separate volume 8 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. (→ c GRM Series High Dielectric Constant Type) p00 ← Part Number List R JIS: B EIA: X7R X7S X7T X7U X6S X6T X5R X5S 1.0×0.5 L×W (mm) 10 Rated Voltage (Vdc) 6.3 Cap. / TC Code X6S X5R, B X7R 1.6×0.8 0.55, 0.6 0.6, 0.7 0.55 T max. (mm) 4 X6S X7R 6.3 4 0.6 2.5 X6Δ X5R, B X5R, B X6T 0.7 2.5 0.5 25 0.9, 0.95, 1 0.9 16 250 100 50 25 16 6.3 X5R X5R, B X5R, B X7R X7R X7R, R X5R, B X7R, R X6S X7Δ, R X6S 2.5 25 X6S X5R, B 68pF 100pF 150pF 220pF p143 p69 p70 p70 p70 330pF p143 p69 p70 p70 p70 470pF p143 p69 p70 p70 p70 680pF p143 p70 p70 p70 p70 1000pF p143 p70 p70 p70 p70 p70 1500pF p143 p70 p70 p70 p70 2200pF p143 p70 p70 p70 p70 p70 p71 3300pF p70 p70 p70 p70 p71 4700pF p70 p70 p70 p70 p70 p71 6800pF p70 p70 p70 p70 p71 10000pF p70 p70 p70 p70 p70 p71 p70 p70 p70 p70 p70 p71 p71 p70 p70 p70 p70 p70 p70 p71 p71 p70 p70 p70 p70 p71 p71 47000pF p70 p70 p70 p70 p71 p71 68000pF p70 p70 p70 p70 p71 0.9 0.9 0.9 0.9 0.9 12000pF 15000pF 0.9 18000pF 22000pF 0.9 27000pF 33000pF 0.9 39000pF 0.1μF 0.9 p71 0.9 0.9 p70 p70 p70 p70 0.15μF p69 p69 p69 0.55 p69 0.55 p69 p69 0.22μF p69 p69 p69 0.55 p69 0.55 p69 p69 0.33μF p69 p69 p69 0.55 p69 0.55 p69 p69 0.47μF p69 p69 p69 0.55 p69 0.55 p69 p69 0.68μF 1.0μF 0.9 2.2μF 4.7μF 10μF 22μF 47μF 100μF 150μF separate volume 9 p69 p69 p71 p71 p71 p71 p70 p69 p69 p71 0.9 0.9 p71 p71 p70 p70 p70 p71 p70 p69 p69 p69 0.9 p71 p71 0.55 0.55 p69 p69 p69 p71 p71 p70 p70 p71 p69 p69 p69 p69 0.55 p69 0.55 p69 p69 p70 p70 p70 p71 0.9 0.9 p71 p71 p71 p71 p71 p71 p71 p71 p71 p71 0.9 0.9 0.9 0.9 0.9 0.9 p71 0.6 0.6 0.6 0.6 p69 p69 p69 p69 p69 0.7 p69 p71 p71 0.95, 1 p72 p69 p72 p72 1 p72 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. (→ c GRM Series High Dielectric Constant Type) p00 ← Part Number List R JIS: B 16 X7S X7T X7U X6S X6T X5R X5S 2.0×1.25 1.6×0.8 L×W (mm) 0.9, T max. (mm) 0.95, 1 Rated Voltage (Vdc) EIA: X7R 0.9, 1 16 Cap. / TC Code X5R, B X6S 10 X7Δ 6.3 X6S 4 0.9, 0.95 1 10 35 0.7 25 0.95 16 100 50 35 25 X7Δ X5R, B X6S X5R, B X5R, B X5R X5R X6S X7R X5R, B X6S X5R X7R R 16 X6S X5R B X7R 68pF 100pF 150pF 220pF 330pF 470pF 680pF 1000pF 1500pF 2200pF 3300pF 4700pF 6800pF p72 10000pF p72 12000pF 15000pF 18000pF 22000pF 27000pF 33000pF p72 39000pF 47000pF 68000pF p72 0.1μF p72 0.15μF 0.22μF 0.33μF 0.9 p71 0.9 0.9 p71 p71 0.9 0.9 0.9 0.9 p71 p71 p71 p71 p72 p71 0.9 0.9 0.68μF 0.9 p71 p71 0.9 0.9 p71 p71 p71 0.9 0.9 0.9 0.9 p71 p71 p71 p71 0.9 0.9 0.9 0.9 0.9 2.2μF 0.9 p71 p71 p71 p71 p71 p71 4.7μF 10μF 22μF p72 p72 0.9 0.47μF 1.0μF p72 p72 0.9 0.9 0.9 p71 p72 p72 p72 p72 1 1 1 1 1 0.9 0.9 0.9 0.9 0.9 0.95 p72 p72 p72 p72 p72 p72 p72 p72 p72 p72 1 1 p72 p72 1 p72 1 p72 p72 p72 p72 p72 p72 p72 p72 p72 p72 p72 p71 p71 0.9 0.95 0.95 p72 p72 p72 p72 p72 p72 p72 p72 p72 1 p72 p72 47μF 100μF 150μF separate volume 10 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. (→ c GRM Series High Dielectric Constant Type) p00 ← Part Number List JIS: R B EIA: X7R X7S X7T X6S X6T X5R X5S 2.0×1.25 L×W (mm) 0.95, 1 0.95 T max. (mm) 10 16 Rated Voltage (Vdc) Cap. / TC Code X7U R X6S X5R B X7Δ X5R 6.3 B X6S X5R 4 B 50 1 250 1.35 100 50 100 25 16 X6S X5R X7R, R X7R X7R X7R X7R, R X5R, B X7R, R X6S X5R, B X7R 68pF 100pF 150pF 220pF 330pF 470pF 680pF 1000pF p143 1500pF p143 2200pF p143 3300pF p143 4700pF p143 6800pF p143 0.95 10000pF p73 p72 12000pF 0.95 15000pF p73 p72 18000pF 1 22000pF p73 p73 27000pF 0.95 0.95 33000pF p73 p72 p72 39000pF 47000pF p73 p73 p73 p73 68000pF p73 p73 p73 p73 0.1μF p73 p73 p73 p73 p73 p73 0.15μF 0.22μF p73 0.95 0.33μF p72 0.47μF 0.68μF p72 22μF 47μF 100μF 150μF separate volume 11 p73 p73 p73 p73 p73 p73 p73 p73 p73 p73 p73 2.2μF 10μF p73 p73 p73 p73 p73 p72 1.0μF 4.7μF p73 p73 p73 p73 p72 p72 p72 p72 p72 p72 p73 p73 p73 p72 p72 p72 p72 p73 p72 p72 p73 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. (→ c GRM Series High Dielectric Constant Type) p00 ← Part Number List JIS: R B EIA: X7R X7S X7T X6S X6T X5R X5S 2.0×1.25 L×W (mm) 1.4 1.35 T max. (mm) Rated Voltage (Vdc) X7U 16 10 Cap. / TC Code X6S X5R, B X6S 6.3 100 50 25 16 1.45 10 X6S X7R X5R, B X7R, R X5R, B X7R X6S X7R 6.3 B 4 250 25 6.3 4 X7R X6S X5R, B X7U X6S X7R X5R X5R, B X6S X5R, B 68pF 100pF 150pF 220pF 330pF 470pF 680pF 1000pF 1500pF 2200pF 3300pF 4700pF 6800pF 10000pF p143 12000pF 15000pF 18000pF 22000pF 27000pF 33000pF 39000pF 47000pF 68000pF 0.1μF 0.15μF 0.22μF 0.33μF 0.47μF p73 0.68μF 1.0μF p73 p73 p73 2.2μF p73 p73 4.7μF p73 p73 p73 10μF 22μF 47μF p73 p73 p73 p73 p73 p73 p73 p73 p73 p73 p73 p73 p73 p73 p73 p73 p73 p73 p73 p73 p74 p74 p74 p74 p74 p74 p74 p74 100μF 150μF separate volume 12 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. (→ c GRM Series High Dielectric Constant Type) p00 ← Part Number List JIS: R B EIA: X7R X7S X7T X6S X6T X5R X5S 3.2×1.6 L×W (mm) 0.95 0.7 T max. (mm) Rated Voltage (Vdc) X7U 25 16 Cap. / TC Code X5R, B X6S 100 50 35 25 X7R X7R X5R X7R, R 1.25 16 B 10 6.3 1000 630 1.25, 1.3 50 250 X6S X5R, B X5R, B X6S X5R, B X7R X7R X7R X7R, R 16 B X6S 100 B 25 1.8 630 X7R X5R, B X7R 68pF 100pF 150pF 220pF 330pF 470pF p144 680pF p144 1000pF p144 p144 1500pF p144 p144 2200pF p144 p144 3300pF p144 p144 4700pF p144 p144 6800pF p144 10000pF p144 12000pF 15000pF p143 p74 p144 18000pF 22000pF 1.25 p143 p74 27000pF 1.25 33000pF p74 39000pF 1.25 47000pF p74 68000pF 0.1μF 1.25 p143 p74 p74 0.15μF p74 p74 p74 1.25 0.22μF p74 p74 p74 1.25 1.25 p74 p74 0.33μF p74 p74 p74 p74 p74 0.47μF p74 0.68μF 1.3 p74 p74 p74 p74 p74 1.0μF p74 p74 1.3 2.2μF p74 p74 p74 p74 4.7μF 10μF 22μF 47μF 100μF 150μF separate volume 13 1.3 p74 p74 p74 p74 p74 p74 p74 p74 p74 p74 p74 1.25 p74 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. (→ c GRM Series High Dielectric Constant Type) p00 ← Part Number List JIS: R B EIA: X7R X7S X7U X6S X6T X5R X5S 3.2×2.5 3.2×1.6 L×W (mm) 1.8 T max. (mm) Rated Voltage (Vdc) 250 Cap. / TC Code X7R X7T 50 25 1.9 1.8, 1.9 16 10 6.3 100 X7R X5R, B X7R X6S X5R, B X7R, R X6S X5R, B X7R X6S X5R, B X7Δ X7R 6.3 4 4 X6Δ X5R, B X7U X6Δ 1 6.3 X5R X5S 4 X6T X5S p75 p75 68pF 100pF 150pF 220pF 330pF 470pF 680pF 1000pF 1500pF 2200pF 3300pF 4700pF 6800pF 10000pF 12000pF 15000pF 18000pF 22000pF 27000pF 33000pF p143 39000pF 47000pF p143 68000pF 0.1μF p143 0.15μF 0.22μF 0.33μF 0.47μF 0.68μF 1.8 1.0μF p74 2.2μF p74 p74 p74 4.7μF p74 10μF 22μF 47μF 100μF 150μF p74 1.9 p74 p74 p74 p74 p74 p74 p74 p74 p74 p74 p74 p74 p74 p74 p74 p74 p74 1.8 p74 p74 p74 p74 p74 p74 p74 p74 1.8 1.8 1.8 1.8 1.8 p74 p74 p74 p74 p74 1.9 1.9 1.9 1.9 p74 p74 p74 p74 p74 p75 separate volume 14 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. (→ c GRM Series High Dielectric Constant Type) p00 ← Part Number List JIS: R B EIA: X7R X7S X7T Rated Voltage (Vdc) X6S X6T X5R X5S 3.2×2.5 L×W (mm) T max. (mm) X7U 1 2.5 Cap. / TC Code X6T 1.5 1000 630 250 X7R X7R X7R 1.8 50 X7R 10 B 2.2 2 100 1000 630 25 250 2.7 100 50 35 25 16 X6S X7R X7R X7R X7R X7R X6S X7R X7R X5R, B X7R X5R, B X7R X6S X5R, B X7R 68pF 100pF 150pF 220pF 330pF 470pF 680pF 1000pF 1500pF 2200pF 3300pF 4700pF 6800pF p144 10000pF p144 12000pF 15000pF p144 18000pF 22000pF p144 p144 27000pF 33000pF p144 39000pF 47000pF p144 68000pF p143 0.1μF p143 0.15μF p143 0.22μF p143 0.33μF 0.47μF 0.68μF p75 p75 p75 1.0μF p75 2.2μF p75 4.7μF p75 10μF p75 22μF p75 47μF 100μF 150μF p75 separate volume 15 p75 p75 p75 p75 p75 p75 p75 p75 p75 p75 p75 p75 p75 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table p00 Oct.1,2012 Each number in the Part Number List refers to the page number printed at the bottom of the page. (→ c GRM Series High Dielectric Constant Type) p00 ← Part Number List JIS: R B X7S X7T X7U X6S 1.5 2.7 6.3 10 16 Cap. / TC Code X6S X5R, B X7R X6S X5R, B X7Δ X6T X5R X5S 4.5×3.2 3.2×2.5 L×W (mm) T max. (mm) Rated Voltage (Vdc) EIA: X7R 4 630 5.7×5.0 2 250 1000 630 2 250 1000 630 250 X6S X5R, B X7U X6S X7R X7R X7R X7R X7R X7R X7R X7R 68pF 100pF 150pF 220pF 330pF 470pF 680pF 1000pF 1500pF 2200pF 3300pF 4700pF 6800pF 10000pF 12000pF 15000pF 18000pF 22000pF 27000pF 33000pF p144 39000pF 47000pF p144 68000pF p144 p144 0.1μF p144 p144 0.15μF p144 p143 0.22μF p144 0.33μF p144 p144 0.47μF p144 p144 p144 0.68μF p144 1.0μF p144 2.2μF 4.7μF 10μF 22μF p75 47μF p75 p75 p75 p75 100μF p75 p75 p75 p75 p75 p75 p75 p75 p75 p75 p75 150μF separate volume 16 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Capacitance Table c GNM Series High Dielectric Constant Type p00 ← Part Number List R JIS: B EIA: X7R X5R 2 Number of Elements 0.9×0.6 L×W (mm) 1.37×1.0 0.5 T max. (mm) 16 Rated Voltage (Vdc) Cap. / TC Code X5R 0.55 10 B 4 X5R B X5R 0.7 16 B X7R R 10 X5R B 50 X5R B 25 X7R R X5R B p77 p77 p77 p77 16 X7R R X5R B 2200pF p77 p77 p77 p77 4700pF p77 p77 p77 p77 p77 p77 p77 p77 X7R R 470pF 1000pF 10000pF p77 p77 p77 p77 22000pF p77 p77 p77 p77 p77 p77 47000pF p77 p77 p77 p77 p77 p77 0.1μF p77 p77 p77 p77 p77 p77 p77 p77 p77 0.22μF 0.47μF 1.0μF p77 p77 p77 p77 p77 2.2μF 2 4 1.37×1.0 2.0×1.25 Number of Elements L×W (mm) 0.7 T max. (mm) 0.8 16 Rated Voltage (Vdc) Cap. / TC Code X5R 10 B X7R R 16 X5R B X5R 0.55 10 B 6.3 X5R B X5R 16 B X7R R 0.7 10 B X5R 6.3 B X5R 50 B 470pF p77 1000pF p77 2200pF 4700pF 10000pF 22000pF p77 p77 p77 p77 p77 p77 47000pF p77 p77 p77 p77 p77 p77 p77 p77 0.1μF p77 0.22μF p77 p77 p77 0.47μF p77 p77 2.2μF p77 p77 p77 p77 4 Number of Elements 2.0×1.25 L×W (mm) T max. (mm) 0.7 Rated Voltage (Vdc) 25 Cap. / TC Code X7R 0.95 16 R B 10 X7R R B 22000pF p78 p78 p78 47000pF p78 p78 p78 0.1μF p78 p78 p78 6.3 X5R B X5R B p78 p78 p78 p78 470pF 1000pF 2200pF p77 p77 p77 4700pF p77 p77 p77 10000pF p77 p77 p78 0.22μF 0.47μF 1.0μF 2.2μF p77 p77 p77 p77 p77 p77 p77 p77 p77 p77 p77 1.0μF 4 X7R p77 p77 R B p77 p77 p77 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Capacitance Table c LLL Series High Dielectric Constant Type p00 ← Part Number List L×W (mm) T max. (mm) Rated Voltage (Vdc) EIA: X7R X7S X6S 0.5×1.0 0.8×1.6 0.35 6.3 Cap. / TC Code X6S X5R 0.5 4 25 16 1.25×2.0 0.55 10 4 X7S X7R X7R X7R X7S 4 0.6 50 25 16 0.5 10 4 50 25 16 0.7 10 6.3 4 50 25 0.95 10 16 X7S X7R X7R X7R X7R X7S X7R X7R X7R X7R X7R X7S X7R X7R X7R X7R 2200pF p80 4700pF p80 10000pF 22000pF p80 47000pF p80 0.1μF p80 0.22μF p80 p80 p80 p80 p80 p80 p80 p80 p80 p80 p80 p80 p80 p80 0.47μF p80 p80 p80 1.0μF p80 2.2μF p80 p80 p80 p80 p80 p80 p80 p80 4.7μF 10μF L×W (mm) T max. (mm) Rated Voltage (Vdc) 1.25×2.0 1.6×3.2 0.95 10 Cap. / TC Code X7R 0.5 4 50 25 0.8 16 10 50 25 16 1.25 10 6.3 50 25 16 10 6.3 X7S X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X5R 2200pF 4700pF 10000pF p80 p80 22000pF p80 p80 47000pF p80 0.1μF p80 0.22μF p80 0.47μF p80 1.0μF p80 2.2μF p80 p80 p80 p80 p80 p80 p80 p80 p80 p80 p80 p80 4.7μF p80 p80 10μF p80 c LLR Series High Dielectric Constant Type p00 ← Part Number List EIA: X7S 0.8×1.6 L×W (mm) 0.55 T max. (mm) 4 Rated Voltage (Vdc) X7S TC Code Cap. / ESR (mΩ) 100 1.0μF p80 220 470 1000 p80 p80 p80 5 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Capacitance Table c LLA Series High Dielectric Constant Type p00 ← Part Number List EIA: X7R X7S L×W (mm) 1.6× 0.8 2.0×1.25 T max. (mm) 0.55 Rated Voltage (Vdc) 4 Cap. / TC Code X7S 25 16 10 0.95 6.3 4 25 10000pF p81 10 6.3 4 22000pF p81 p81 0.22μF p81 0.47μF p81 1.0μF p81 p81 2.2μF p81 p81 p81 p81 p81 EIA: X7R p81 22000pF p81 16 6.3 3.2×1.6 0.55 4 16 10 6.3 X7R X7R X7S X7R X7R X7R 47000pF p81 0.1μF p81 p81 0.22μF p81 0.47μF p81 p81 p81 1.0μF p81 2.2μF p81 p81 p81 X7S 0.55 10000pF 1.25 16 10 p81 p81 p81 p81 p81 2.0×1.25 Cap. / TC Code X7R 10 p81 p81 p81 ← Part Number List 25 16 p81 p81 c LLM Series High Dielectric Constant Type Rated Voltage (Vdc) 0.95 6.3 p81 0.1μF L×W (mm) 10 p81 p81 T max. (mm) 16 p81 4.7μF 6 16 0.55 X7R X7R X7R X7R X7S X7R X7R X7R X7R X7S X7R X7R X7R X7R X7R X7R X7R 47000pF p00 3.2×1.6 0.55 p81 p81 p81 p81 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf Oct.1,2012 Capacitance Table c GJM Series Temperature Compensating Type p00 ← Part Number List L×W (mm) T max. (mm) CK JIS: CJ 0.4×0.2 0.6×0.3 0.22 0.33 16 Rated Voltage (Vdc) Cap. / TC Code C0G 25 CΔ C0Δ CH EIA: C0G 1.0×0.5 0.55 6.3 CΔ C0H C0G 50 CH 0.1pF C0G CΔ p96 p99 0.2pF p83 p86 p89 p92 p96 p99 1.0pF p83 p86 p89 p92 p96 p99 2.0pF p83 p86 p89 p92 p96 p99 3.0pF p83 p86 p90 p93 p96 p100 4.0pF p84 p87 p90 p93 p97 p100 p93 p97 p100 5.0pF p84 p87 p90 6.0pF p84 p87 p90 p94 p97 p101 7.0pF p85 p88 p91 p94 p98 p101 8.0pF p85 p88 p91 p94 p98 p101 9.0pF p85 p88 p92 p95 p98 p102 10pF p86 p89 p92 p95 p99 p102 11pF p92 p95 p99 p102 12pF p92 p95 p99 p102 13pF p92 p95 p99 p102 15pF p92 p95 p99 p102 16pF p92 p95 p99 p102 18pF p92 p95 p99 p102 20pF p92 p95 p99 p102 22pF p95 p95 p99 p102 24pF p95 p95 p99 p102 27pF p95 p95 p99 p102 p102 30pF p95 p95 p99 33pF p95 p95 p99 p102 36pF p99 p102 39pF p99 p102 43pF p99 p103 47pF p99 p103 The indication for every 0.1 pF has been omitted for less than 10 pF. Refer to the Part Number List for details. 7 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Capacitance Table c GQM Series Temperature Compensating Type p00 ← Part Number List CJ CH EIA: C0G 1.6×0.8 L×W (mm) T max. (mm) CK JIS: 0.8 Rated Voltage (Vdc) 250 0.9 100 Cap. / TC Code C0G C0G CΔ 2.8× 2.8 2.0×1.25 0.95 50 C0G 100 CH C0G CΔ 50 C0G CH 1 1.35 250 500 C0G C0G 0.1pF p105 0.5pF p105 p105 p106 p108 p108 p110 p111 1.0pF p105 p106 p106 p108 p108 p110 p111 2.0pF p105 p106 p106 p108 p109 p110 p111 3.0pF p105 p106 p106 p108 p109 p110 p111 4.0pF p105 p106 p106 p108 p109 p110 p111 5.0pF p105 p106 p106 p108 p109 p110 p111 p108 p109 p110 p111 7.0pF p105 p106 p107 p108 p109 p110 p111 8.0pF p105 p106 p107 p108 p109 p110 p111 9.0pF p105 p107 p107 p108 p109 p110 p111 10pF p105 p107 p107 p108 p109 p110 p111 11pF p105 p107 p107 p108 p109 p110 p111 12pF p105 p107 p107 p108 p109 p110 p111 13pF p105 p107 p107 p108 p109 p110 p112 15pF p105 p107 p107 p108 p109 p110 p112 16pF p105 p107 p107 p108 p109 p110 p112 18pF p105 p107 p107 p108 p109 p110 p112 20pF p105 p107 p107 p109 p109 p110 p112 22pF p105 p107 p107 p109 p109 p110 p112 24pF p105 p107 p107 p109 p109 p111 p112 27pF p105 p107 p107 p109 p109 p111 p112 30pF p105 p107 p107 p109 p109 p111 p112 33pF p105 p107 p107 p109 p110 p111 p112 36pF p105 p107 p107 p109 p110 p111 p112 39pF p105 p107 p107 p109 p110 p111 p112 43pF p105 p107 p107 p109 p110 p111 p112 47pF p105 p107 p107 p109 p110 p111 p112 51pF p107 p107 p109 p110 p111 p112 56pF p107 p107 p109 p110 p111 p112 62pF p107 p107 p109 p110 p111 p112 68pF p107 p108 p109 p110 p111 p112 75pF p107 p108 p109 p110 p111 p112 82pF p107 p108 p109 p110 p111 p112 91pF p107 p108 p109 p110 p111 p112 100pF p107 p108 p109 p110 p111 p112 6.0pF p105 p106 p106 8 The indication for every 0.1 pF has been omitted for less than 10 pF. Refer to the Part Number List for details. C02E.pdf Oct.1,2012 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Capacitance Table c GMA Series High Dielectric Constant Type p00 ← Part Number List JIS: R B L×W (mm) 0.38×0.38 T max. (mm) Rated Voltage (Vdc) X5R 0.5×0.5 0.35 0.8×0.8 0.4 10 Cap. / TC Code X7R EIA: X7R 100 R 25 X7R X7R 100pF p114 150pF p114 220pF p114 330pF p114 470pF p114 680pF p114 1000pF p114 0.6 10 B X7R R 6.3 B X5R 100 B X7R X7R 1500pF p114 p114 p114 2200pF p114 p114 p114 3300pF p114 p114 p114 4700pF p114 p114 6800pF 25 10 B X7R R 6.3 B p114 p114 p114 p114 p114 p114 15000pF p114 p114 p114 p114 p114 22000pF p114 p114 p114 p114 p114 33000pF p114 p114 p114 47000pF p114 p114 p114 68000pF 0.47μF B p114 p114 p114 p114 10000pF p114 p114 0.1μF X5R p114 p114 p114 p114 p114 p114 p114 p114 p114 p114 9 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Capacitance Table c GMD Series High Dielectric Constant Type p00 ← Part Number List JIS: R B Cap. / TC Code X7R X5R 0.6×0.3 L×W (mm) 1.0×0.5 0.33 T max. (mm) Rated Voltage (Vdc) EIA: X7R 25 R 0.55 16 B X7R R 10 B X7R R 6.3 B X5R 50 B X7R R 25 B X7R R 16 B X7R R 10 B X5R B 100pF p116 p116 p116 120pF p116 p116 p116 150pF p116 p116 p116 180pF p116 p116 p116 220pF p116 p116 p116 p116 p116 p117 270pF p116 p116 p116 p116 p117 p117 330pF p116 p116 p116 p116 p117 p117 390pF p116 p116 p116 p116 p117 p117 470pF p116 p116 p116 p116 p117 p117 560pF p116 p116 p116 p116 p117 p117 680pF p116 p116 p116 p116 p117 p117 820pF p116 p116 p116 p116 p117 p117 1000pF p116 p116 p116 p116 p117 p117 1200pF p116 p116 p116 p116 p117 p117 p116 p117 p117 1500pF p116 p116 p116 10 1800pF p116 p116 p116 p116 p117 p117 2200pF p116 p116 p116 p116 p117 p117 2700pF p116 p116 p116 p116 p117 p117 3300pF p116 p116 p116 p116 p117 p117 3900pF p116 p116 p116 p116 p117 p117 4700pF p116 p116 p116 p116 p117 p117 5600pF p116 p116 p116 p117 p117 p117 6800pF p116 p116 p116 p117 p117 p117 8200pF p116 p116 p116 p117 p117 p117 10000pF p116 p116 p116 p117 p117 p117 12000pF p117 p117 p117 15000pF p117 p117 p117 18000pF p117 p117 p117 22000pF p117 p117 p117 27000pF p117 p117 p117 33000pF p117 p117 p117 39000pF p117 p117 p117 47000pF p117 p117 p117 56000pF p116 p116 p117 p117 p117 68000pF p116 p116 p117 p117 p117 82000pF p116 p116 p117 p117 p117 0.1μF p116 p116 p117 p117 p117 0.12μF p117 p117 0.15μF p117 p117 0.18μF p117 p117 0.22μF p117 p117 0.27μF p117 p117 0.33μF p117 p117 0.39μF p117 p117 0.47μF p117 p117 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Capacitance Table c GRJ Series High Dielectric Constant Type p00 ← Part Number List L×W (mm) T max. (mm) EIA: X7R 2.0×1.25 1 Rated Voltage (Vdc) 250 Cap. / TC Code X7R 3.2×1.6 1.45 3.2×2.5 1.25 1.8 1.5 250 1000 630 250 1000 630 250 1000 630 4.5×3.2 2 250 1000 630 1.5 250 630 5.7×5.0 2 2 250 1000 630 250 1000 630 250 X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 470pF p149 680pF p149 1000pF p148 p149 p149 1500pF p148 p149 p149 2200pF p148 p149 p149 3300pF p148 p149 p149 4700pF p148 p149 p149 6800pF p148 p149 p149 p149 p149 p149 10000pF p148 15000pF p148 p148 p149 22000pF p148 p148 p149 p149 33000pF p149 p149 p149 p149 p148 47000pF p149 p148 68000pF p149 p149 0.1μF p149 p149 p148 p148 p148 p148 0.15μF p149 p149 p149 p148 p148 0.22μF p148 p149 p148 0.33μF p148 p148 0.47μF p148 p148 0.68μF p148 1.0μF p148 c GR3 Series High Dielectric Constant Type p00 ← Part Number List EIA: X7T L×W (mm) 2.0×1.25 T max. (mm) 1 1.45 3.2×1.6 1 3.2×2.5 1.25 1.8 1.5 4.5×3.2 2 1.5 5.7×5.0 2 2 2.7 Rated Voltage (Vdc) 250 250 450 250 630 450 250 630 450 250 630 250 630 450 250 250 630 450 250 630 450 250 630 450 250 Cap. / TC Code X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T 10000pF p153 p153 15000pF p153 p153 22000pF 33000pF 47000pF 68000pF 0.1μF 0.15μF 0.22μF p154 p154 p153 p153 p153 p154 p153 p154 p153 p153 p154 p153 p154 p153 p153 p154 p153 p153 p154 p153 p153 p153 p154 0.27μF 0.33μF 0.47μF p154 p153 p153 p153 p153 0.56μF 0.68μF 1.0μF p153 p153 p153 11 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Capacitance Table c GRM/DC3.15kV Series High Dielectric Constant Type p00 ← Part Number List EIA: C0G c GR7 Series p00 L×W (mm) 4.5× 2.0 T max. (mm) ← Part Number List L×W (mm) 1 T max. (mm) Rated Voltage (Vdc) 3150 2.0×1.25 1 Cap. / TC Code 3.2×1.6 1.45 1 1.25 1.8 350 350 350 350 - - - Rated Voltage (Vdc) 350 Cap. / TC Code C0G Murata Temperature Characteristic: - - 5.0pF p158 10000pF p165 10pF p158 15000pF p165 12pF p158 22000pF p165 p165 p165 15pF p158 27000pF p165 p165 18pF p158 33000pF 22pF p158 47000pF p165 p165 p165 p165 p165 27pF p158 33pF p158 39pF p158 c GA2 Series High Dielectric Constant Type 47pF p158 p00 ← Part Number List L×W (mm) 4.5× 2.0 c GR4 Series High Dielectric Constant Type p00 ← Part Number List L×W (mm) 4.5× 2.0 T max. (mm) 1.5 EIA: X7R 4.5×3.2 1.5 2 5.7× 5.0 2 Rated Voltage (Vdc) 2000 2000 2000 2000 Cap. / TC Code X7R X7R X7R X7R 4.5×3.2 1.5 1.5 2 2 250 250 250 T max. (mm) Cap. / TC Code X7R X7R X7R X7R 470pF p169 1000pF p169 2200pF p169 3300pF p169 4700pF 120pF p161 10000pF p169 150pF p161 22000pF p169 180pF p161 47000pF 220pF p161 0.1μF 330pF p161 390pF p161 470pF p161 560pF p161 680pF p161 820pF p161 1000pF p161 1200pF p161 1500pF p161 1800pF p161 2200pF p161 2700pF p161 3300pF p161 3900pF p161 4700pF 10000pF p161 p161 5.7× 5.0 Rated Voltage (Vac(r.m.s.)) 250 100pF p161 270pF p161 12 EIA: X7R p169 p169 p169 - C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Capacitance Table c GA3 Series UL, IEC60384-14 Class X1/Y2 Type GC High Dielectric Constant Type p00 ← Part Number List c GA3 Series IEC60384-14 Class Y3 Type GD p00 EIA: X7R 1 SL EIA: X7R 4.5×3.2 1.5 2.2 1.5 2 Rated Voltage (Vac(r.m.s.)) 250 250 250 250 250 SL X7R SL X7R X7R T max. (mm) 2.3 JIS: 4.5×2.0 L×W (mm) L×W (mm) 5.7× 5.0 T max. (mm) ← Part Number List Rated Voltage (Vac(r.m.s.)) 250 Cap. / TC Code Cap. / TC Code X7R 10pF p176 100pF p173 12pF p176 150pF p173 15pF p176 220pF p173 18pF p176 330pF p173 22pF p176 27pF p176 33pF p176 39pF p176 c GA3 Series IEC60384-14 Class Y2, X1/Y2 Type GF p00 56pF p176 ← Part Number List SL JIS: 1 1.5 EIA: X7R 5.7× 2.8 4.5×2.0 L×W (mm) T max. (mm) 47pF p176 2.2 68pF p176 82pF p176 5.7×5.0 1.5 1.5 2 100pF p176 250 250 Rated Voltage (Vac(r.m.s.)) 250 250 250 250 250 150pF p176 SL X7R SL X7R X7R X7R X7R 220pF p176 Cap. / TC Code 10pF p174 330pF p176 12pF p174 470pF p176 15pF p174 680pF p176 18pF p174 1000pF p176 22pF p174 1500pF p176 27pF p174 1800pF p176 33pF p174 2200pF p176 39pF p174 4700pF p176 47pF p174 56pF p174 68pF p174 c GA3 Series IEC60384-14 Class X2 Type GB High Dielectric Constant Type 82pF p174 100pF p174 150pF p174 220pF p00 p174 330pF p174 470pF p174 680pF p174 ← Part Number List 5.7×5.0 L×W (mm) p174 T max. (mm) 1.5 p174 Rated Voltage (Vac(r.m.s.)) 250 1000pF p174 p174 Cap. / TC Code X7R 1500pF p175 2 2.5 2.9 250 250 250 X7R X7R X7R 10000pF p177 1800pF p175 15000pF p177 2200pF p175 22000pF 3300pF p175 4700pF EIA: X7R p175 p177 33000pF p177 47000pF p177 56000pF p177 13 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Capacitance Table c KRM Series High Dielectric Constant Type p00 ← Part Number List EIA: X7R 3.5×1.7 L×W (mm) T max. (mm) 2 Rated Voltage (Vdc) 25 Cap. / TC Code X5R 1.0μF 2.9 100 50 25 X6S X5R 3.6× 1.7 3.7× 1.7 2.9 2.9 50 100 6.1×5.3 3 100 63 3.9 50 25 p200 p200 p200 50 25 p200 p200 p200 47μF p200 c KR3 Series High Dielectric Constant Type ← Part Number List EIA: X7T 6.1×5.3 L×W (mm) T max. (mm) 3 Rated Voltage (Vdc) 630 450 250 630 450 250 450 630 450 250 Cap. / TC Code X7T 3.9 5 6.7 X7T X7T X7T X7T X7T X7T X7T X7T X7T 0.1μF p204 0.15μF p204 p204 0.27μF 14 63 p200 p200 33μF 2.2μF 100 p200 p200 22μF 1.2μF 6.7 25 p200 p200 p200 15μF 1.0μF 100 p200 10μF p200 0.56μF 25 p200 p200 p200 6.8μF 0.47μF 5 50 p200 4.7μF 0.22μF 63 X7R X7R X6S X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 2.2μF p00 100 p204 p204 p204 p204 p204 p204 p204 p204 p204 p204 p204 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf Oct.1,2012 o Part Numbering Chip Monolithic Ceramic Capacitors (Part Number) GR M 18 8 q w e r t B1 1H y 102 K u i A01 D o wSeries Product ID GR GQ GM GN LL GJ GA GW !0 rDimension (T) (Except GNM) qProduct ID Code Dimension (T) Code Series 2 0.2mm J Soft Termination Type 3 0.3mm M Tin Plated Layer 4 0.4mm 3 Large Capacitance and High Allowable Ripple Current 5 0.5mm 6 0.6mm 4 Only for Information Devices 7 0.7mm 7 Only for Camera Flash Circuit 8 0.8mm M High Frequency for Flow/Reflow Soldering 9 0.85mm A 1.0mm A Monolithic Microchip B 1.25mm D For Bonding C 1.6mm M Capacitor Array D 2.0mm 2.5mm L Low ESL Type E R Controlled ESR Low ESL Type F 3.2mm A 8-termination Low ESL Type M 1.15mm M 10-termination Low ESL Type N 1.35mm M High Frequency Low Loss Type Q 1.5mm Low Distortion Type R 1.8mm 8 Low Acoustic Type S 2.8mm 2 For AC250V (r.m.s.) X Depends on individual standards. 3 Safety Standard Certified Type M For Decoupling 4 eDimensions (LgW) Code Dimensions (LgW) EIA 02 0.4g0.2mm 01005 03 0.6g0.3mm 0201 05 0.5g0.5mm 0202 08 0.8g0.8mm 0303 0D 0.38g0.38mm 015015 0M 0.9g0.6mm 0302 15 1.0g0.5mm 0402 18 1.6g0.8mm 0603 1M 1.37g1.0mm 0504 1U 0.6g1.0mm 02404 21 2.0g1.25mm 0805 22 2.8g2.8mm 1111 31 3.2g1.6mm 1206 32 3.2g2.5mm 1210 42 4.5g2.0mm 1808 43 4.5g3.2mm 1812 52 5.7g2.8mm 2211 55 5.7g5.0mm 2220 rElements (GNM Only) Code Elements 2 2-elements 4 4-elements Continued on the following page. Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog. 15 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Continued from the preceding page. tTemperature Characteristics Temperature Characteristic Codes Code Public STD Code Temperature Characteristics Reference Temperature Capacitance Change or Temperature Temperature Range Coefficient Capacitance Change Each Temperature (%) –55°C –25°C –10°C Max. Min. Max. Min. Max. Min. 0±60ppm/°C –55 to 150°C 0.82 –0.45 0.49 –0.27 0.33 –0.18 20 to 125°C 0±30ppm/°C –55 to 125°C 0.54 –0.23 0.33 –0.14 0.22 –0.09 20 to 85°C +350 to –1000ppm/°C –55 to 125°C - - - - - - 0C CHA *2 20°C 20 to 150°C 1C CG JIS 20°C SL JIS 20°C 1X Operating Temperature Range 2C CH JIS 20°C 20 to 125°C 0±60ppm/°C –55 to 125°C 0.82 –0.45 0.49 –0.27 0.33 –0.18 2P PH JIS 20°C 20 to 85°C –150±60ppm/°C –25 to 85°C - - 1.32 0.41 0.88 0.27 2R RH JIS 20°C 20 to 85°C –220±60ppm/°C –25 to 85°C - - 1.7 0.72 1.13 0.48 2S SH JIS 20°C 20 to 85°C –330±60ppm/°C –25 to 85°C - - 2.3 1.22 1.54 0.81 2T TH JIS 20°C 20 to 85°C –470±60ppm/°C –25 to 85°C - - 3.07 1.85 2.05 1.23 1.37 –0.9 3C CJ JIS 20°C 20 to 125°C 0±120ppm/°C –55 to 125°C 0.82 –0.54 0.55 –0.36 3P PJ JIS 20°C 20 to 85°C –150±120ppm/°C –25 to 85°C - - 1.65 0.14 1.1 0.09 3R RJ JIS 20°C 20 to 85°C –220±120ppm/°C –25 to 85°C - - 2.03 0.45 1.35 0.3 3S SJ JIS 20°C 20 to 85°C –330±120ppm/°C –25 to 85°C - - 2.63 0.95 1.76 0.63 3T TJ JIS 20°C 20 to 85°C –470±120ppm/°C –25 to 85°C - - 3.4 1.58 2.27 1.05 –750±120ppm/°C –25 to 85°C - - 4.94 2.84 3.29 1.89 –0.75 3U UJ JIS 20°C 20 to 85°C 4C CK JIS 20°C 20 to 125°C 0±250ppm/°C –55 to 125°C 2.56 –1.88 1.54 –1.13 1.02 4P PK JIS 20°C 20 to 85°C –150±250ppm/°C –25 to 85°C - - 2.36 –0.45 1.57 –0.3 4R RK JIS 20°C 20 to 85°C –220±250ppm/°C –25 to 85°C - - 2.74 –0.14 1.83 –0.09 4S SK JIS 20°C 20 to 85°C –330±250ppm/°C –25 to 85°C - - 3.35 0.36 2.23 0.24 JIS 20°C 20 to 85°C –470±250ppm/°C –25 to 85°C - - 4.12 0.99 2.74 0.66 4T TK 4U UK JIS 20°C 20 to 85°C –750±250ppm/°C –25 to 85°C - - 5.65 2.25 3.77 1.5 5C C0G EIA 25°C 25 to 125°C 0±30ppm/°C –55 to 125°C 0.58 –0.24 0.4 –0.17 0.25 –0.11 5G X8G *2 25°C 25 to 150°C 0±30ppm/°C –55 to 150°C 0.58 –0.24 0.4 –0.17 0.25 –0.11 6C C0H EIA 25°C 25 to 125°C 0±60ppm/°C –55 to 125°C 0.87 –0.48 0.59 –0.33 0.38 –0.21 6P P2H EIA 25°C 25 to 85°C –150±60ppm/°C –55 to 125°C 2.33 0.72 1.61 0.5 1.02 0.32 1.28 6R R2H EIA 25°C 25 to 85°C –220±60ppm/°C –55 to 125°C 3.02 2.08 0.88 1.32 0.56 6S S2H EIA 25°C 25 to 85°C –330±60ppm/°C –55 to 125°C 4.09 2.16 2.81 1.49 1.79 0.95 6T T2H EIA 25°C 25 to 85°C –470±60ppm/°C –55 to 125°C 5.46 3.28 3.75 2.26 2.39 1.44 7U U2J EIA 25°C 25 to 125°C *5 –750±120ppm/°C –55 to 125°C 8.78 5.04 6.04 3.47 3.84 2.21 B1 B *1 JIS 20°C –25 to 85°C ±10% –25 to 85°C - - - - - - –25 to 85°C ±10% –25 to 85°C - - - - - - –25 to 85°C ±20% - - - - - - 85 to 125°C +15%, –30% - - - - - - B3 B JIS 20°C –25 to 125°C C3 C JIS 20°C C6 X5S EIA 25°C –55 to 85°C ±22% –55 to 85°C - - - - - - C7 X7S EIA 25°C –55 to 125°C ±22% –55 to 125°C - - - - - - EIA 25°C –55 to 105°C ±22% –55 to 105°C - - - - - - C8 X6S D3 D JIS 20°C –25 to 125°C +20%, –30% –25 to 85°C - - - - - - D6 X5T EIA 25°C –55 to 125°C +22%, –33% –55 to 125°C - - - - - - D7 X7T EIA 25°C –55 to 125°C +22%, –33% –55 to 125°C - - - - - - D8 X6T EIA 25°C –55 to 105°C +22%, –33% –55 to 105°C - - - - - - E (1/2Ur) JIS 20°C –25 to 85°C +20%, –55% –25 to 85°C - - - - - - E1 E4 Z5U EIA 25°C 10 to 85°C +22%, –56% 10 to 85°C - - - - - - E7 X7U EIA 25°C –55 to 125°C +22%, –56% –55 to 125°C - - - - - - F1 F *1 JIS 20°C –25 to 85°C +30%, –80% –25 to 85°C - - - - - - F4 Z5V EIA 25°C 10 to 85°C +22%, –82% –20 to 85°C - - - - - - F5 Y5V EIA 25°C –30 to 85°C +22%, –82% –30 to 85°C - - - - - - - - - - - - - - - - - - J1 JA *2 20°C –25 to 105°C –20% max. –25 to 105°C L8 X8L *2 25°C –55 to 150°C +15%, –40% –55 to 150°C *1 Capacitance change is specified with 50% rated voltage applied. *2 Murata Temperature Characteristic Code. *5 Rated Voltage 100Vdc max: 25 to 85°C Continued on the following page. Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog. 16 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Continued from the preceding page. Temperature Characteristic Codes Public STD Code Code Temperature Characteristics Reference Temperature Capacitance Change or Temperature Temperature Range Coefficient Operating Temperature Range Capacitance Change Each Temperature (%) –55°C –25°C –10°C Max. Min. Max. Min. Max. Min. R1 R *1 JIS 20°C –55 to 125°C ±15% –55 to 125°C - - - - - - R3 R JIS 20°C –55 to 125°C ±15% –55 to 125°C - - - - - - R6 X5R EIA 25°C –55 to 85°C ±15% –55 to 85°C - - - - - - –55 to 125°C ±15% –55 to 125°C - - - - - - R7 X7R R8 R9 EIA 25°C R *1 JIS 20°C –25 to 85°C ±15% –25 to 85°C - - - - - - X8R EIA 25°C –55 to 150°C ±15% –55 to 150°C - - - - - - - - - - - - - - - - - - W0 - *2 25°C –55 to 125°C ±10% *3 +22%, –33% *4 –55 to 125°C *1 Capacitance change is specified with 50% rated voltage applied. *2 Murata Temperature Characteristic Code. *3 Apply DC350V bias. *4 No DC bias. yRated Voltage iCapacitance Tolerance Code Rated Voltage Code Capacitance Tolerance 0E DC2.5V B ±0.1pF 0G DC4V C ±0.25pF ±0.5pF (10pF and below) 0J DC6.3V 1A DC10V 1C DC16V F ±1% 1E DC25V G ±2% YA DC35V J ±5% 1H DC50V K ±10% 2A DC100V M ±20% 2D DC200V N ±30% 2E DC250V R Depends on individual standards. D ±0.5% (10pF and over) YD DC300V W ±0.05pF 2W DC450V X Depends on individual standards. 2H DC500V Y Depends on individual standards. 2J DC630V Z +80/–20% 3A DC1kV 3D DC2kV 3F DC3.15kV BB DC350V (for Camera Flash Circuit) oIndividual Specification Code (Except LLR) Expressed by three figures. E2 AC250V oESR (LLR Only) GC X1/Y2; AC250V (Safety Standard Certified Type GC) Code ESR GF Y2, X1/Y2; AC250V (Safety Standard Certified Type GF) E01 100mΩ GD Y3; AC250V (Safety Standard Certified Type GD) E03 220mΩ GB X2; AC250V (Safety Standard Certified Type GB) E05 470mΩ E07 1000mΩ uCapacitance Expressed by three-digit alphanumerics. The unit is picofarad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two numbers. If there is a decimal point, it is expressed by the capital letter "R." In this case, all figures are significant digits. If any alphabet, other than "R", is included, this indicates the specific part number is a non-standard part. Ex.) !0Packaging Code Packaging L ø180mm Embossed Taping D ø180mm Paper Taping E ø180mm Paper Taping (LLL15) K ø330mm Embossed Taping Code Capacitance J ø330mm Paper Taping R50 0.5pF F ø330mm Paper Taping (LLL15) 1R0 1.0pF B Bulk 100 10pF C Bulk Case 103 10000pF T Bulk Tray Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog. 17 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Metal Terminal Monolithic Ceramic Capacitors (Part Number) KR M 55 T q w e r t R7 2A y 106 M u i H01 K o qProduct ID !0 rHeight Dimension (T) wSeries Product ID Code Code Dimension (T) Series F 1.9mm 2.7mm KR M Metal Terminal Monolithic Ceramic Capacitors (DC25V to DC100V) K L 2.8mm 3.7mm 3 Metal Terminal Monolithic Ceramic Capacitors Large Capacitance and High Allowable Ripple Current Type (DC250V to DC630V) Q KR T 4.8mm W 6.4mm eChip Dimension (LgW) Code Chip Dimension EIA 31 3.2g1.6mm 1206 55 5.7g5.0mm 2220 tTemperature Characteristics Temperature Characteristic Codes Code Temperature Characteristics Public STD Code Reference Temperature Temperature Range Temperature Coefficient Operating Temperature Range C8 X6S EIA 25°C –55 to 105°C ±22% –55 to 105°C D7 X7T EIA 25°C –55 to 125°C +22/–33% –55 to 125°C R6 X5R EIA 25°C –55 to 85°C ±15% –55 to 85°C R7 X7R EIA 25°C –55 to 125°C ±15% –55 to 125°C iCapacitance Tolerance yRated Voltage Code Rated Voltage Code Capacitance Tolerance 1E DC25V K ±10% 1H DC50V M ±20% 1J DC63V 2A DC100V oIndividual Specification Code 2E DC250V Expressed by three figures. 2W DC450V 2J DC630V uCapacitance !0Package Code Package K ø330mm Embossed Taping Expressed by three-digit alphanumerics. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros that follow the two numbers. Ex.) Code Capacitance 105 1.0μF 225 2.2μF 106 10μF 226 22μF Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog. 18 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. p79 High-Q Type GJM Series H p82 High Frequency GQM Series H p104 Monolithic Microchip GMA Series p113 For Bonding GMD Series p115 !Caution/Notice p118 For General Purpose GRM Series Low ESL LLL/LLR/LLA/LLM Series Capacitor Array GNM Series p76 Low ESL LLp Series Capacitor Array GNM Series High-Q Type GJM Series p21 High Frequency GQM Series (Less than 250Vdc) Monolithic Microchip GMA Series For General Purpose GRM Series For Bonding GMD Series Chip Monolithic Ceramic Capacitors Product Information Contents Oct.1,2012 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. SEARCH SPECIFICATIONS AND TEST METHODS, Package, Chart of characteristic data, please refer to the search for capacitor page WEB. http://www.murata.com/products/capacitor/ Detailed specifications sheet Rated value SPECIFICATIONS AND TEST METHODS Package Caution, Notice (Storage, Soldering and Mounting, ....etc.) Chart of characteristic data The main products published characteristic data. Frequency characteristics(ESR, Impedance) S parameter(Smith chart S11) DC bias characteristics AC voltage characteristics Capacitance - temperature characteristics Calorific property by ripple current 20 C02E.pdf Oct.1,2012 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors For General Purpose GRM Series For General Purpose GRM Series (Less than 250Vdc) The most widely used capacitor in the world! Ideal capacitors can be selected from an abundant lineup. g e Capacitor Array GNM Series e T W L 1 Lineup of small size and large capacity capacitors is available. 2 Since the external electrodes consist of a plated structure, the product is excellent in soldering heat resistance, Low ESL LLp Series and flow (GRM18/21/31 types only) and reflow soldering can be used. 3 High reliability with no polarity. 4 Low impedance in high frequencies, and excellent in pulse response and noise elimination. 5 The profile dimensions have been standardized with high precision, therefore high reliability can be acquired in the case of automatic mounting. High-Q Type GJM Series 6 Paper tape or embossed tape is used for the packaging, according to the chip size. Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series GRM15/18/21 (T = 0.6, 1.25) can also be supplied in bulk cases. 21 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List c 0.4×0.2mm For General Purpose GRM Series T max. Rated TC Voltage Code 0.22mm 16Vdc T max. Ultracompact C0G Cap. Tol. Part Number Rated TC Voltage Code 0.22mm 16Vdc C0G Cap. 2.2pF Tol. Part Number ±0.05pF GRM0225C1C2R2WD05# ±0.1pF GRM0225C1C2R2BD05# 0.2pF ±0.05pF GRM0225C1CR20WD05# 0.3pF ±0.05pF GRM0225C1CR30WD05# 0.4pF ±0.05pF GRM0225C1CR40WD05# ±0.1pF GRM0225C1CR40BD05# ±0.1pF GRM0225C1C2R4BD05# 0.5pF ±0.05pF GRM0225C1CR50WD05# ±0.25pF GRM0225C1C2R4CD05# ±0.1pF GRM0225C1CR20BD05# ±0.25pF GRM0225C1C2R2CD05# 2.3pF ±0.1pF GRM0225C1C2R3BD05# ±0.1pF GRM0225C1CR30BD05# Capacitor Array GNM Series ±0.1pF GRM0225C1CR50BD05# 0.6pF 0.7pF 0.8pF Low ESL LLp Series 1.0pF 1.1pF High-Q Type GJM Series 1.2pF ±0.25pF GRM0225C1C2R3CD05# 2.4pF 2.5pF ±0.1pF GRM0225C1C2R5BD05# ±0.25pF GRM0225C1C2R5CD05# ±0.05pF GRM0225C1CR70WD05# 2.6pF High Frequency GQM Series 1.5pF Monolithic Microchip GMA Series 1.6pF 1.7pF For Bonding GMD Series 1.8pF 1.9pF ±0.1pF GRM0225C1C2R6BD05# ±0.05pF GRM0225C1CR80WD05# ±0.25pF GRM0225C1C2R6CD05# 2.7pF ±0.1pF GRM0225C1C2R7BD05# ±0.1pF GRM0225C1CR90BD05# ±0.25pF GRM0225C1C2R7CD05# ±0.05pF GRM0225C1C1R0WD05# 2.8pF ±0.05pF GRM0225C1C2R8WD05# ±0.1pF GRM0225C1C1R0BD05# ±0.1pF GRM0225C1C2R8BD05# ±0.25pF GRM0225C1C1R0CD05# ±0.25pF GRM0225C1C2R8CD05# ±0.05pF GRM0225C1C1R1WD05# 2.9pF ±0.05pF GRM0225C1C2R9WD05# ±0.1pF GRM0225C1C1R1BD05# ±0.1pF GRM0225C1C2R9BD05# ±0.25pF GRM0225C1C1R1CD05# ±0.25pF GRM0225C1C2R9CD05# ±0.05pF GRM0225C1C1R2WD05# 3.0pF ±0.05pF GRM0225C1C1R3WD05# ±0.05pF GRM0225C1C3R0WD05# ±0.1pF GRM0225C1C3R0BD05# ±0.25pF GRM0225C1C3R0CD05# 3.1pF ±0.05pF GRM0225C1C3R1WD05# ±0.1pF GRM0225C1C1R3BD05# ±0.1pF GRM0225C1C3R1BD05# ±0.25pF GRM0225C1C1R3CD05# ±0.25pF GRM0225C1C3R1CD05# ±0.05pF GRM0225C1C1R4WD05# 3.2pF ±0.05pF GRM0225C1C3R2WD05# ±0.1pF GRM0225C1C1R4BD05# ±0.1pF GRM0225C1C3R2BD05# ±0.25pF GRM0225C1C1R4CD05# ±0.25pF GRM0225C1C3R2CD05# ±0.05pF GRM0225C1C1R5WD05# 3.3pF ±0.05pF GRM0225C1C3R3WD05# ±0.1pF GRM0225C1C1R5BD05# ±0.1pF GRM0225C1C3R3BD05# ±0.25pF GRM0225C1C1R5CD05# ±0.25pF GRM0225C1C3R3CD05# ±0.05pF GRM0225C1C1R6WD05# 3.4pF ±0.05pF GRM0225C1C3R4WD05# ±0.1pF GRM0225C1C1R6BD05# ±0.1pF GRM0225C1C3R4BD05# ±0.25pF GRM0225C1C1R6CD05# ±0.25pF GRM0225C1C3R4CD05# ±0.05pF GRM0225C1C1R7WD05# 3.5pF ±0.05pF GRM0225C1C3R5WD05# ±0.1pF GRM0225C1C1R7BD05# ±0.1pF GRM0225C1C3R5BD05# ±0.25pF GRM0225C1C1R7CD05# ±0.25pF GRM0225C1C3R5CD05# ±0.05pF GRM0225C1C1R8WD05# 3.6pF ±0.05pF GRM0225C1C3R6WD05# ±0.1pF GRM0225C1C1R8BD05# ±0.1pF GRM0225C1C3R6BD05# ±0.25pF GRM0225C1C1R8CD05# ±0.25pF GRM0225C1C3R6CD05# ±0.05pF GRM0225C1C1R9WD05# 3.7pF Product Information ±0.05pF GRM0225C1C2R0WD05# ±0.05pF GRM0225C1C3R7WD05# ±0.1pF GRM0225C1C3R7BD05# ±0.25pF GRM0225C1C1R9CD05# 2.1pF ±0.05pF GRM0225C1C2R7WD05# ±0.05pF GRM0225C1CR90WD05# ±0.1pF GRM0225C1C1R9BD05# 2.0pF ±0.05pF GRM0225C1C2R6WD05# ±0.1pF GRM0225C1CR70BD05# ±0.25pF GRM0225C1C1R2CD05# 1.4pF ±0.05pF GRM0225C1C2R5WD05# ±0.1pF GRM0225C1CR60BD05# ±0.1pF GRM0225C1C1R2BD05# 1.3pF ±0.05pF GRM0225C1C2R4WD05# ±0.05pF GRM0225C1CR60WD05# ±0.1pF GRM0225C1CR80BD05# 0.9pF ±0.05pF GRM0225C1C2R3WD05# ±0.25pF GRM0225C1C3R7CD05# 3.8pF ±0.05pF GRM0225C1C3R8WD05# ±0.1pF GRM0225C1C2R0BD05# ±0.1pF GRM0225C1C3R8BD05# ±0.25pF GRM0225C1C2R0CD05# ±0.25pF GRM0225C1C3R8CD05# ±0.05pF GRM0225C1C2R1WD05# ±0.1pF GRM0225C1C2R1BD05# ±0.25pF GRM0225C1C2R1CD05# 3.9pF ±0.05pF GRM0225C1C3R9WD05# ±0.1pF GRM0225C1C3R9BD05# ±0.25pF GRM0225C1C3R9CD05# Part number # indicates the package specification code. 22 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 0.4×0.2mm) C0G 5.6pF ±0.1pF GRM0225C1C4R0BD05# 4.2pF ±0.05pF GRM0225C1C4R1WD05# ±0.5pF GRM0225C1C5R6DD05# 5.7pF ±0.25pF GRM0225C1C4R1CD05# ±0.25pF GRM0225C1C5R7CD05# ±0.05pF GRM0225C1C4R2WD05# ±0.5pF GRM0225C1C5R7DD05# 5.8pF 4.6pF ±0.25pF GRM0225C1C4R2CD05# ±0.1pF GRM0225C1C5R8BD05# ±0.25pF GRM0225C1C5R8CD05# ±0.5pF GRM0225C1C5R8DD05# 5.9pF ±0.1pF GRM0225C1C5R9BD05# ±0.1pF GRM0225C1C4R4BD05# ±0.25pF GRM0225C1C5R9CD05# ±0.25pF GRM0225C1C4R4CD05# ±0.5pF GRM0225C1C5R9DD05# ±0.05pF GRM0225C1C4R5WD05# 6.0pF ±0.1pF GRM0225C1C4R5BD05# ±0.1pF GRM0225C1C6R0BD05# ±0.25pF GRM0225C1C6R0CD05# ±0.05pF GRM0225C1C4R6WD05# ±0.5pF GRM0225C1C6R0DD05# 6.1pF ±0.1pF GRM0225C1C6R1BD05# ±0.05pF GRM0225C1C4R7WD05# ±0.25pF GRM0225C1C6R1CD05# ±0.5pF GRM0225C1C6R1DD05# 6.2pF ±0.1pF GRM0225C1C6R2BD05# ±0.1pF GRM0225C1C4R8BD05# ±0.25pF GRM0225C1C6R2CD05# ±0.05pF GRM0225C1C4R9WD05# ±0.5pF GRM0225C1C6R2DD05# 6.3pF ±0.1pF GRM0225C1C4R9BD05# ±0.1pF GRM0225C1C6R3BD05# ±0.25pF GRM0225C1C6R3CD05# ±0.05pF GRM0225C1C5R0WD05# ±0.5pF GRM0225C1C6R3DD05# 6.4pF ±0.1pF GRM0225C1C6R4BD05# ±0.05pF GRM0225C1C5R1WD05# ±0.25pF GRM0225C1C6R4CD05# ±0.1pF GRM0225C1C5R1BD05# ±0.5pF GRM0225C1C6R4DD05# 6.5pF ±0.1pF GRM0225C1C6R5BD05# ±0.05pF GRM0225C1C5R2WD05# ±0.25pF GRM0225C1C6R5CD05# ±0.25pF GRM0225C1C5R2CD05# ±0.5pF GRM0225C1C6R5DD05# 6.6pF ±0.5pF GRM0225C1C5R2DD05# ±0.1pF GRM0225C1C6R6BD05# ±0.25pF GRM0225C1C6R6CD05# ±0.1pF GRM0225C1C5R3BD05# ±0.5pF GRM0225C1C6R6DD05# 6.7pF ±0.5pF GRM0225C1C5R3DD05# ±0.1pF GRM0225C1C6R7BD05# ±0.25pF GRM0225C1C6R7CD05# ±0.1pF GRM0225C1C5R4BD05# ±0.5pF GRM0225C1C6R7DD05# 6.8pF ±0.05pF GRM0225C1C6R8WD05# ±0.5pF GRM0225C1C5R4DD05# ±0.1pF GRM0225C1C6R8BD05# ±0.05pF GRM0225C1C5R5WD05# ±0.25pF GRM0225C1C6R8CD05# ±0.1pF GRM0225C1C5R5BD05# ±0.25pF GRM0225C1C5R5CD05# ±0.5pF GRM0225C1C5R5DD05# 5.6pF ±0.05pF GRM0225C1C6R7WD05# ±0.05pF GRM0225C1C5R4WD05# ±0.25pF GRM0225C1C5R4CD05# 5.5pF ±0.05pF GRM0225C1C6R6WD05# ±0.05pF GRM0225C1C5R3WD05# ±0.25pF GRM0225C1C5R3CD05# 5.4pF ±0.05pF GRM0225C1C6R5WD05# ±0.5pF GRM0225C1C5R1DD05# ±0.1pF GRM0225C1C5R2BD05# 5.3pF ±0.05pF GRM0225C1C6R4WD05# ±0.25pF GRM0225C1C5R0CD05# ±0.25pF GRM0225C1C5R1CD05# 5.2pF ±0.05pF GRM0225C1C6R3WD05# ±0.25pF GRM0225C1C4R9CD05# ±0.1pF GRM0225C1C5R0BD05# 5.1pF ±0.05pF GRM0225C1C6R2WD05# ±0.05pF GRM0225C1C4R8WD05# ±0.25pF GRM0225C1C4R8CD05# 5.0pF ±0.05pF GRM0225C1C6R1WD05# ±0.25pF GRM0225C1C4R6CD05# ±0.25pF GRM0225C1C4R7CD05# 4.9pF ±0.05pF GRM0225C1C6R0WD05# ±0.25pF GRM0225C1C4R5CD05# ±0.1pF GRM0225C1C4R7BD05# 4.8pF ±0.05pF GRM0225C1C5R9WD05# ±0.05pF GRM0225C1C4R4WD05# ±0.1pF GRM0225C1C4R6BD05# 4.7pF ±0.05pF GRM0225C1C5R8WD05# ±0.05pF GRM0225C1C4R3WD05# ±0.1pF GRM0225C1C4R3BD05# 4.5pF ±0.05pF GRM0225C1C5R7WD05# ±0.1pF GRM0225C1C5R7BD05# ±0.25pF GRM0225C1C4R3CD05# 4.4pF ±0.1pF GRM0225C1C5R6BD05# ±0.1pF GRM0225C1C4R1BD05# ±0.1pF GRM0225C1C4R2BD05# 4.3pF Part Number ±0.25pF GRM0225C1C5R6CD05# ±0.25pF GRM0225C1C4R0CD05# 4.1pF Tol. ±0.05pF GRM0225C1C5R6WD05# For General Purpose GRM Series 0.22mm 16Vdc Cap. Capacitor Array GNM Series Rated TC Voltage Code Low ESL LLp Series ±0.05pF GRM0225C1C4R0WD05# T max. High-Q Type GJM Series 4.0pF Part Number High Frequency GQM Series C0G Tol. Monolithic Microchip GMA Series 0.22mm 16Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. ±0.5pF GRM0225C1C6R8DD05# 6.9pF ±0.05pF GRM0225C1C6R9WD05# ±0.1pF GRM0225C1C6R9BD05# ±0.25pF GRM0225C1C6R9CD05# Part number # indicates the package specification code. 23 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 0.4×0.2mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.22mm 16Vdc C0G Cap. Tol. Part Number 6.9pF ±0.5pF GRM0225C1C6R9DD05# 7.0pF ±0.05pF GRM0225C1C7R0WD05# T max. Rated TC Voltage Code 0.22mm 16Vdc C0G Cap. 8.3pF 7.1pF ±0.1pF GRM0225C1C8R4BD05# ±0.05pF GRM0225C1C7R1WD05# ±0.25pF GRM0225C1C8R4CD05# ±0.5pF GRM0225C1C8R4DD05# 8.5pF Capacitor Array GNM Series ±0.5pF GRM0225C1C7R1DD05# ±0.1pF GRM0225C1C8R5BD05# ±0.25pF GRM0225C1C8R5CD05# ±0.1pF GRM0225C1C7R2BD05# ±0.5pF GRM0225C1C8R5DD05# 8.6pF ±0.5pF GRM0225C1C7R2DD05# ±0.1pF GRM0225C1C8R6BD05# ±0.25pF GRM0225C1C8R6CD05# ±0.1pF GRM0225C1C7R3BD05# ±0.5pF GRM0225C1C8R6DD05# Low ESL LLp Series 8.7pF ±0.5pF GRM0225C1C7R3DD05# ±0.1pF GRM0225C1C8R7BD05# ±0.25pF GRM0225C1C8R7CD05# ±0.1pF GRM0225C1C7R4BD05# ±0.5pF GRM0225C1C8R7DD05# 8.8pF ±0.1pF GRM0225C1C8R8BD05# ±0.05pF GRM0225C1C7R5WD05# ±0.25pF GRM0225C1C8R8CD05# High-Q Type GJM Series ±0.25pF GRM0225C1C7R5CD05# ±0.5pF GRM0225C1C8R8DD05# 8.9pF ±0.5pF GRM0225C1C7R5DD05# ±0.1pF GRM0225C1C8R9BD05# ±0.25pF GRM0225C1C8R9CD05# ±0.1pF GRM0225C1C7R6BD05# ±0.5pF GRM0225C1C8R9DD05# 9.0pF High Frequency GQM Series ±0.5pF GRM0225C1C7R6DD05# ±0.1pF GRM0225C1C9R0BD05# ±0.25pF GRM0225C1C9R0CD05# ±0.1pF GRM0225C1C7R7BD05# ±0.5pF GRM0225C1C9R0DD05# 9.1pF ±0.1pF GRM0225C1C9R1BD05# ±0.05pF GRM0225C1C7R8WD05# ±0.25pF GRM0225C1C9R1CD05# Monolithic Microchip GMA Series ±0.1pF GRM0225C1C7R8BD05# ±0.5pF GRM0225C1C9R1DD05# 9.2pF ±0.1pF GRM0225C1C9R2BD05# ±0.05pF GRM0225C1C7R9WD05# ±0.25pF GRM0225C1C9R2CD05# ±0.25pF GRM0225C1C7R9CD05# ±0.5pF GRM0225C1C9R2DD05# 9.3pF ±0.5pF GRM0225C1C7R9DD05# ±0.1pF GRM0225C1C9R3BD05# ±0.25pF GRM0225C1C9R3CD05# For Bonding GMD Series ±0.1pF GRM0225C1C8R0BD05# ±0.5pF GRM0225C1C9R3DD05# 9.4pF ±0.05pF GRM0225C1C9R4WD05# ±0.5pF GRM0225C1C8R0DD05# ±0.1pF GRM0225C1C9R4BD05# ±0.05pF GRM0225C1C8R1WD05# ±0.25pF GRM0225C1C9R4CD05# ±0.1pF GRM0225C1C8R1BD05# ±0.5pF GRM0225C1C9R4DD05# ±0.25pF GRM0225C1C8R1CD05# 9.5pF ±0.05pF GRM0225C1C9R5WD05# Product Information ±0.5pF GRM0225C1C8R1DD05# ±0.1pF GRM0225C1C9R5BD05# ±0.05pF GRM0225C1C8R2WD05# ±0.25pF GRM0225C1C9R5CD05# ±0.1pF GRM0225C1C8R2BD05# ±0.25pF GRM0225C1C8R2CD05# ±0.5pF GRM0225C1C8R2DD05# 8.3pF ±0.05pF GRM0225C1C9R3WD05# ±0.05pF GRM0225C1C8R0WD05# ±0.25pF GRM0225C1C8R0CD05# 8.2pF ±0.05pF GRM0225C1C9R2WD05# ±0.5pF GRM0225C1C7R8DD05# ±0.1pF GRM0225C1C7R9BD05# 8.1pF ±0.05pF GRM0225C1C9R1WD05# ±0.5pF GRM0225C1C7R7DD05# ±0.25pF GRM0225C1C7R8CD05# 8.0pF ±0.05pF GRM0225C1C9R0WD05# ±0.05pF GRM0225C1C7R7WD05# ±0.25pF GRM0225C1C7R7CD05# 7.9pF ±0.05pF GRM0225C1C8R9WD05# ±0.05pF GRM0225C1C7R6WD05# ±0.25pF GRM0225C1C7R6CD05# 7.8pF ±0.05pF GRM0225C1C8R8WD05# ±0.5pF GRM0225C1C7R4DD05# ±0.1pF GRM0225C1C7R5BD05# 7.7pF ±0.05pF GRM0225C1C8R7WD05# ±0.05pF GRM0225C1C7R4WD05# ±0.25pF GRM0225C1C7R4CD05# 7.6pF ±0.05pF GRM0225C1C8R6WD05# ±0.05pF GRM0225C1C7R3WD05# ±0.25pF GRM0225C1C7R3CD05# 7.5pF ±0.05pF GRM0225C1C8R5WD05# ±0.05pF GRM0225C1C7R2WD05# ±0.25pF GRM0225C1C7R2CD05# 7.4pF ±0.05pF GRM0225C1C8R4WD05# ±0.5pF GRM0225C1C7R0DD05# ±0.25pF GRM0225C1C7R1CD05# 7.3pF ±0.1pF GRM0225C1C8R3BD05# ±0.5pF GRM0225C1C8R3DD05# 8.4pF ±0.1pF GRM0225C1C7R1BD05# 7.2pF Part Number ±0.25pF GRM0225C1C8R3CD05# ±0.1pF GRM0225C1C7R0BD05# ±0.25pF GRM0225C1C7R0CD05# Tol. ±0.05pF GRM0225C1C8R3WD05# ±0.5pF GRM0225C1C9R5DD05# 9.6pF ±0.05pF GRM0225C1C9R6WD05# ±0.1pF GRM0225C1C9R6BD05# ±0.25pF GRM0225C1C9R6CD05# Part number # indicates the package specification code. 24 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 0.4×0.2mm) 0.22mm 16Vdc CK 1.3pF ±0.05pF GRM0224C1C1R3WD05# ±0.1pF GRM0224C1C1R3BD05# ±0.5pF GRM0225C1C9R7DD05# ±0.25pF GRM0224C1C1R3CD05# ±0.05pF GRM0225C1C9R8WD05# 1.4pF ±0.05pF GRM0224C1C1R4WD05# ±0.1pF GRM0225C1C9R8BD05# ±0.1pF GRM0224C1C1R4BD05# ±0.25pF GRM0225C1C9R8CD05# ±0.25pF GRM0224C1C1R4CD05# 1.5pF ±0.05pF GRM0225C1C9R9WD05# ±0.05pF GRM0224C1C1R5WD05# ±0.1pF GRM0224C1C1R5BD05# ±0.1pF GRM0225C1C9R9BD05# ±0.25pF GRM0224C1C1R5CD05# ±0.25pF GRM0225C1C9R9CD05# 1.6pF ±0.05pF GRM0224C1C1R6WD05# ±0.5pF GRM0225C1C9R9DD05# ±0.1pF GRM0224C1C1R6BD05# ±2% GRM0225C1C100GD05# ±0.25pF GRM0224C1C1R6CD05# ±5% GRM0225C1C100JD05# 12pF ±2% GRM0225C1C120GD05# ±5% GRM0225C1C120JD05# 15pF ±2% GRM0225C1C150GD05# ±5% GRM0225C1C150JD05# ±0.1pF GRM0224C1C1R8BD05# 18pF ±2% GRM0225C1C180GD05# ±0.25pF GRM0224C1C1R8CD05# ±5% GRM0225C1C180JD05# ±2% GRM0225C1C220GD05# ±0.1pF GRM0224C1C1R9BD05# ±5% GRM0225C1C220JD05# ±0.25pF GRM0224C1C1R9CD05# ±2% GRM0225C1C270GD05# ±5% GRM0225C1C270JD05# ±0.1pF GRM0224C1C2R0BD05# 33pF ±2% GRM0225C1C330GD05# ±0.25pF GRM0224C1C2R0CD05# ±5% GRM0225C1C330JD05# 39pF ±2% GRM0225C1C390GD05# ±0.1pF GRM0223C1C2R1BD05# ±5% GRM0225C1C390JD05# ±0.25pF GRM0223C1C2R1CD05# ±2% GRM0225C1C470GD05# ±5% GRM0225C1C470JD05# 10pF 22pF 27pF 47pF CK ±0.1pF GRM0224C1C1R2BD05# ±0.25pF GRM0225C1C9R7CD05# ±0.5pF GRM0225C1C9R8DD05# 9.9pF Part Number ±0.25pF GRM0224C1C1R2CD05# ±0.1pF GRM0225C1C9R7BD05# 9.8pF 1.2pF Tol. 0.2pF 0.3pF 0.4pF 1.7pF ±0.25pF GRM0224C1C1R7CD05# 1.8pF 1.9pF 2.0pF CJ 2.1pF 2.2pF ±0.05pF GRM0224C1C1R9WD05# ±0.05pF GRM0224C1C2R0WD05# ±0.05pF GRM0223C1C2R1WD05# ±0.05pF GRM0223C1C2R2WD05# ±0.25pF GRM0223C1C2R2CD05# 2.3pF ±0.05pF GRM0223C1C2R3WD05# ±0.05pF GRM0224C1CR30WD05# ±0.1pF GRM0223C1C2R3BD05# ±0.1pF GRM0224C1CR30BD05# ±0.25pF GRM0223C1C2R3CD05# ±0.05pF GRM0224C1CR40WD05# 2.4pF ±0.05pF GRM0223C1C2R4WD05# ±0.1pF GRM0223C1C2R4BD05# ±0.05pF GRM0224C1CR50WD05# ±0.1pF GRM0224C1CR50BD05# 0.6pF ±0.05pF GRM0224C1C1R8WD05# ±0.1pF GRM0223C1C2R2BD05# ±0.1pF GRM0224C1CR40BD05# 0.5pF ±0.05pF GRM0224C1C1R7WD05# ±0.1pF GRM0224C1C1R7BD05# ±0.05pF GRM0224C1CR20WD05# ±0.1pF GRM0224C1CR20BD05# ±0.25pF GRM0223C1C2R4CD05# 2.5pF ±0.05pF GRM0223C1C2R5WD05# ±0.05pF GRM0224C1CR60WD05# ±0.1pF GRM0223C1C2R5BD05# ±0.1pF GRM0224C1CR60BD05# ±0.25pF GRM0223C1C2R5CD05# 0.7pF ±0.05pF GRM0224C1CR70WD05# ±0.1pF GRM0224C1CR70BD05# ±0.1pF GRM0223C1C2R6BD05# 0.8pF ±0.05pF GRM0224C1CR80WD05# ±0.25pF GRM0223C1C2R6CD05# 0.9pF ±0.05pF GRM0224C1CR90WD05# ±0.1pF GRM0223C1C2R7BD05# ±0.1pF GRM0224C1CR90BD05# ±0.25pF GRM0223C1C2R7CD05# ±0.1pF GRM0224C1CR80BD05# 1.0pF 1.1pF 1.2pF ±0.05pF GRM0224C1C1R0WD05# 2.6pF 2.7pF 2.8pF ±0.05pF GRM0223C1C2R6WD05# ±0.05pF GRM0223C1C2R7WD05# ±0.05pF GRM0223C1C2R8WD05# ±0.1pF GRM0224C1C1R0BD05# ±0.1pF GRM0223C1C2R8BD05# ±0.25pF GRM0224C1C1R0CD05# ±0.25pF GRM0223C1C2R8CD05# ±0.05pF GRM0224C1C1R1WD05# 2.9pF ±0.05pF GRM0223C1C2R9WD05# ±0.1pF GRM0224C1C1R1BD05# ±0.1pF GRM0223C1C2R9BD05# ±0.25pF GRM0224C1C1R1CD05# ±0.25pF GRM0223C1C2R9CD05# ±0.05pF GRM0224C1C1R2WD05# For General Purpose GRM Series ±0.05pF GRM0225C1C9R7WD05# Cap. Capacitor Array GNM Series ±0.5pF GRM0225C1C9R6DD05# 9.7pF Rated TC Voltage Code Low ESL LLp Series 9.6pF T max. High-Q Type GJM Series Part Number High Frequency GQM Series C0G Tol. Monolithic Microchip GMA Series 0.22mm 16Vdc Cap. 3.0pF For Bonding GMD Series Rated TC Voltage Code Product Information T max. ±0.05pF GRM0223C1C3R0WD05# Part number # indicates the package specification code. 25 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 0.4×0.2mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.22mm 16Vdc CJ Cap. 3.0pF Tol. Part Number ±0.1pF GRM0223C1C3R0BD05# T max. Rated TC Voltage Code 0.22mm 16Vdc CH Cap. 4.8pF ±0.25pF GRM0223C1C3R0CD05# 3.1pF 3.2pF Capacitor Array GNM Series 3.3pF 3.4pF ±0.05pF GRM0223C1C3R1WD05# 4.9pF Low ESL LLp Series High-Q Type GJM Series 3.8pF ±0.1pF GRM0222C1C4R9BD05# ±0.05pF GRM0223C1C3R2WD05# 5.0pF ±0.1pF GRM0222C1C5R0BD05# ±0.25pF GRM0223C1C3R2CD05# ±0.25pF GRM0222C1C5R0CD05# ±0.05pF GRM0223C1C3R3WD05# 5.1pF ±0.1pF GRM0222C1C5R1BD05# ±0.25pF GRM0223C1C3R3CD05# ±0.25pF GRM0222C1C5R1CD05# ±0.05pF GRM0223C1C3R4WD05# ±0.5pF GRM0222C1C5R1DD05# 5.2pF ±0.25pF GRM0223C1C3R4CD05# ±0.1pF GRM0222C1C5R2BD05# ±0.25pF GRM0222C1C5R2CD05# ±0.1pF GRM0223C1C3R5BD05# ±0.5pF GRM0222C1C5R2DD05# 5.3pF High Frequency GQM Series Monolithic Microchip GMA Series 4.2pF ±0.1pF GRM0222C1C5R3BD05# ±0.1pF GRM0223C1C3R6BD05# ±0.25pF GRM0222C1C5R3CD05# ±0.05pF GRM0223C1C3R7WD05# ±0.5pF GRM0222C1C5R3DD05# 5.4pF ±0.1pF GRM0223C1C3R7BD05# ±0.1pF GRM0222C1C5R4BD05# ±0.25pF GRM0222C1C5R4CD05# ±0.05pF GRM0223C1C3R8WD05# ±0.5pF GRM0222C1C5R4DD05# 5.5pF ±0.1pF GRM0222C1C5R5BD05# ±0.05pF GRM0223C1C3R9WD05# ±0.25pF GRM0222C1C5R5CD05# ±0.5pF GRM0222C1C5R5DD05# 5.6pF ±0.1pF GRM0222C1C5R6BD05# ±0.1pF GRM0222C1C4R0BD05# ±0.25pF GRM0222C1C5R6CD05# ±0.05pF GRM0222C1C4R1WD05# ±0.5pF GRM0222C1C5R6DD05# 5.7pF ±0.1pF GRM0222C1C4R1BD05# ±0.1pF GRM0222C1C5R7BD05# ±0.25pF GRM0222C1C5R7CD05# ±0.05pF GRM0222C1C4R2WD05# ±0.5pF GRM0222C1C5R7DD05# 5.8pF ±0.25pF GRM0222C1C4R2CD05# ±0.1pF GRM0222C1C5R8BD05# ±0.25pF GRM0222C1C5R8CD05# ±0.5pF GRM0222C1C5R8DD05# 5.9pF ±0.05pF GRM0222C1C5R9WD05# For Bonding GMD Series ±0.05pF GRM0222C1C4R4WD05# ±0.1pF GRM0222C1C5R9BD05# ±0.1pF GRM0222C1C4R4BD05# ±0.25pF GRM0222C1C5R9CD05# ±0.05pF GRM0222C1C4R5WD05# ±0.5pF GRM0222C1C5R9DD05# 6.0pF ±0.05pF GRM0222C1C6R0WD05# ±0.1pF GRM0222C1C4R5BD05# ±0.1pF GRM0222C1C6R0BD05# ±0.25pF GRM0222C1C4R5CD05# ±0.25pF GRM0222C1C6R0CD05# ±0.05pF GRM0222C1C4R6WD05# ±0.5pF GRM0222C1C6R0DD05# Product Information 6.1pF ±0.05pF GRM0222C1C6R1WD05# ±0.25pF GRM0222C1C4R6CD05# ±0.1pF GRM0222C1C6R1BD05# ±0.05pF GRM0222C1C4R7WD05# ±0.25pF GRM0222C1C6R1CD05# ±0.5pF GRM0222C1C6R1DD05# ±0.1pF GRM0222C1C4R7BD05# ±0.25pF GRM0222C1C4R7CD05# 4.8pF ±0.05pF GRM0222C1C5R8WD05# ±0.05pF GRM0222C1C4R3WD05# ±0.1pF GRM0222C1C4R6BD05# 4.7pF ±0.05pF GRM0222C1C5R7WD05# ±0.25pF GRM0222C1C4R1CD05# ±0.25pF GRM0222C1C4R4CD05# 4.6pF ±0.05pF GRM0222C1C5R6WD05# ±0.05pF GRM0222C1C4R0WD05# ±0.1pF GRM0222C1C4R3BD05# 4.5pF ±0.05pF GRM0222C1C5R5WD05# ±0.25pF GRM0223C1C3R8CD05# ±0.25pF GRM0222C1C4R3CD05# 4.4pF ±0.05pF GRM0222C1C5R4WD05# ±0.25pF GRM0223C1C3R7CD05# ±0.1pF GRM0222C1C4R2BD05# 4.3pF ±0.05pF GRM0222C1C5R3WD05# ±0.05pF GRM0223C1C3R6WD05# ±0.25pF GRM0222C1C4R0CD05# 4.1pF ±0.05pF GRM0222C1C5R2WD05# ±0.05pF GRM0223C1C3R5WD05# ±0.25pF GRM0223C1C3R9CD05# 4.0pF ±0.05pF GRM0222C1C5R1WD05# ±0.1pF GRM0223C1C3R3BD05# ±0.1pF GRM0223C1C3R9BD05# CH ±0.05pF GRM0222C1C5R0WD05# ±0.1pF GRM0223C1C3R2BD05# ±0.1pF GRM0223C1C3R8BD05# 3.9pF ±0.05pF GRM0222C1C4R9WD05# ±0.25pF GRM0222C1C4R9CD05# ±0.25pF GRM0223C1C3R6CD05# 3.7pF ±0.1pF GRM0222C1C4R8BD05# ±0.25pF GRM0222C1C4R8CD05# ±0.25pF GRM0223C1C3R1CD05# ±0.25pF GRM0223C1C3R5CD05# 3.6pF Part Number ±0.1pF GRM0223C1C3R1BD05# ±0.1pF GRM0223C1C3R4BD05# 3.5pF Tol. ±0.05pF GRM0222C1C4R8WD05# 6.2pF ±0.05pF GRM0222C1C6R2WD05# ±0.1pF GRM0222C1C6R2BD05# Part number # indicates the package specification code. 26 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 0.4×0.2mm) CH 7.6pF ±0.1pF GRM0222C1C7R6BD05# ±0.25pF GRM0222C1C7R6CD05# ±0.5pF GRM0222C1C7R6DD05# 7.7pF ±0.5pF GRM0222C1C6R3DD05# ±0.1pF GRM0222C1C7R7BD05# ±0.25pF GRM0222C1C7R7CD05# ±0.1pF GRM0222C1C6R4BD05# ±0.5pF GRM0222C1C7R7DD05# 7.8pF ±0.1pF GRM0222C1C7R8BD05# ±0.05pF GRM0222C1C6R5WD05# ±0.25pF GRM0222C1C7R8CD05# ±0.25pF GRM0222C1C6R5CD05# ±0.5pF GRM0222C1C7R8DD05# 7.9pF ±0.5pF GRM0222C1C6R5DD05# ±0.1pF GRM0222C1C7R9BD05# ±0.25pF GRM0222C1C7R9CD05# ±0.1pF GRM0222C1C6R6BD05# ±0.5pF GRM0222C1C7R9DD05# 8.0pF ±0.1pF GRM0222C1C8R0BD05# ±0.05pF GRM0222C1C6R7WD05# ±0.25pF GRM0222C1C8R0CD05# ±0.1pF GRM0222C1C6R7BD05# ±0.5pF GRM0222C1C8R0DD05# 8.1pF ±0.5pF GRM0222C1C6R7DD05# ±0.1pF GRM0222C1C8R1BD05# ±0.25pF GRM0222C1C8R1CD05# ±0.1pF GRM0222C1C6R8BD05# ±0.5pF GRM0222C1C8R1DD05# 8.2pF ±0.1pF GRM0222C1C8R2BD05# ±0.05pF GRM0222C1C6R9WD05# ±0.25pF GRM0222C1C8R2CD05# ±0.25pF GRM0222C1C6R9CD05# ±0.5pF GRM0222C1C8R2DD05# 8.3pF ±0.5pF GRM0222C1C6R9DD05# ±0.1pF GRM0222C1C8R3BD05# ±0.25pF GRM0222C1C8R3CD05# ±0.1pF GRM0222C1C7R0BD05# ±0.5pF GRM0222C1C8R3DD05# 8.4pF ±0.5pF GRM0222C1C7R0DD05# ±0.1pF GRM0222C1C8R4BD05# ±0.25pF GRM0222C1C8R4CD05# ±0.1pF GRM0222C1C7R1BD05# ±0.5pF GRM0222C1C8R4DD05# 8.5pF ±0.5pF GRM0222C1C7R1DD05# ±0.1pF GRM0222C1C8R5BD05# ±0.25pF GRM0222C1C8R5CD05# ±0.1pF GRM0222C1C7R2BD05# ±0.5pF GRM0222C1C8R5DD05# 8.6pF ±0.05pF GRM0222C1C8R6WD05# ±0.5pF GRM0222C1C7R2DD05# ±0.1pF GRM0222C1C8R6BD05# ±0.05pF GRM0222C1C7R3WD05# ±0.25pF GRM0222C1C8R6CD05# ±0.1pF GRM0222C1C7R3BD05# ±0.25pF GRM0222C1C7R3CD05# ±0.5pF GRM0222C1C8R6DD05# 8.7pF ±0.05pF GRM0222C1C8R7WD05# ±0.5pF GRM0222C1C7R3DD05# ±0.1pF GRM0222C1C8R7BD05# ±0.05pF GRM0222C1C7R4WD05# ±0.25pF GRM0222C1C8R7CD05# ±0.1pF GRM0222C1C7R4BD05# ±0.25pF GRM0222C1C7R4CD05# 7.5pF ±0.05pF GRM0222C1C8R5WD05# ±0.05pF GRM0222C1C7R2WD05# ±0.25pF GRM0222C1C7R2CD05# 7.4pF ±0.05pF GRM0222C1C8R4WD05# ±0.05pF GRM0222C1C7R1WD05# ±0.25pF GRM0222C1C7R1CD05# 7.3pF ±0.05pF GRM0222C1C8R3WD05# ±0.05pF GRM0222C1C7R0WD05# ±0.25pF GRM0222C1C7R0CD05# 7.2pF ±0.05pF GRM0222C1C8R2WD05# ±0.5pF GRM0222C1C6R8DD05# ±0.1pF GRM0222C1C6R9BD05# 7.1pF ±0.05pF GRM0222C1C8R1WD05# ±0.05pF GRM0222C1C6R8WD05# ±0.25pF GRM0222C1C6R8CD05# 7.0pF ±0.05pF GRM0222C1C8R0WD05# ±0.5pF GRM0222C1C6R6DD05# ±0.25pF GRM0222C1C6R7CD05# 6.9pF ±0.05pF GRM0222C1C7R9WD05# ±0.05pF GRM0222C1C6R6WD05# ±0.25pF GRM0222C1C6R6CD05# 6.8pF ±0.05pF GRM0222C1C7R8WD05# ±0.5pF GRM0222C1C6R4DD05# ±0.1pF GRM0222C1C6R5BD05# 6.7pF ±0.05pF GRM0222C1C7R7WD05# ±0.05pF GRM0222C1C6R4WD05# ±0.25pF GRM0222C1C6R4CD05# 6.6pF ±0.05pF GRM0222C1C7R6WD05# ±0.05pF GRM0222C1C6R3WD05# ±0.1pF GRM0222C1C6R3BD05# 6.5pF Part Number ±0.5pF GRM0222C1C6R2DD05# ±0.25pF GRM0222C1C6R3CD05# 6.4pF Tol. ±0.5pF GRM0222C1C8R7DD05# 8.8pF ±0.05pF GRM0222C1C8R8WD05# ±0.5pF GRM0222C1C7R4DD05# ±0.1pF GRM0222C1C8R8BD05# ±0.05pF GRM0222C1C7R5WD05# ±0.25pF GRM0222C1C8R8CD05# ±0.5pF GRM0222C1C8R8DD05# ±0.1pF GRM0222C1C7R5BD05# ±0.25pF GRM0222C1C7R5CD05# ±0.5pF GRM0222C1C7R5DD05# For General Purpose GRM Series 0.22mm 16Vdc Cap. Capacitor Array GNM Series Rated TC Voltage Code Low ESL LLp Series 6.3pF ±0.25pF GRM0222C1C6R2CD05# T max. High-Q Type GJM Series 6.2pF Part Number High Frequency GQM Series CH Tol. Monolithic Microchip GMA Series 0.22mm 16Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. 8.9pF ±0.05pF GRM0222C1C8R9WD05# ±0.1pF GRM0222C1C8R9BD05# Part number # indicates the package specification code. 27 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 0.4×0.2mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.22mm 16Vdc CH Cap. 8.9pF Tol. Part Number ±0.25pF GRM0222C1C8R9CD05# T max. Rated TC Voltage Code 0.22mm 16Vdc CH Cap. Tol. 33pF ±2% GRM0222C1C330GD05# ±5% GRM0222C1C330JD05# ±2% GRM0222C1C390GD05# ±5% GRM0222C1C390JD05# 47pF ±2% GRM0222C1C470GD05# ±5% GRM0222C1C470JD05# 56pF ±2% GRM0225C1A560GD05# ±5% GRM0225C1A560JD05# ±2% GRM0225C1A680GD05# ±5% GRM0225C1A680JD05# ±2% GRM0225C1A820GD05# ±5% GRM0225C1A820JD05# ±2% GRM0225C1A101GD05# ±5% GRM0225C1A101JD05# ±2% GRM0222C1A560GD05# ±5% GRM0222C1A560JD05# ±2% GRM0222C1A680GD05# ±5% GRM0222C1A680JD05# ±2% GRM0222C1A820GD05# ±5% GRM0222C1A820JD05# ±2% GRM0222C1A101GD05# ±5% GRM0222C1A101JD05# ±0.5pF GRM0222C1C8R9DD05# 9.0pF ±0.05pF GRM0222C1C9R0WD05# 39pF ±0.1pF GRM0222C1C9R0BD05# ±0.25pF GRM0222C1C9R0CD05# ±0.5pF GRM0222C1C9R0DD05# 9.1pF ±0.05pF GRM0222C1C9R1WD05# 10Vdc C0G ±0.1pF GRM0222C1C9R1BD05# Capacitor Array GNM Series ±0.25pF GRM0222C1C9R1CD05# 68pF ±0.5pF GRM0222C1C9R1DD05# 9.2pF ±0.05pF GRM0222C1C9R2WD05# 82pF ±0.1pF GRM0222C1C9R2BD05# ±0.25pF GRM0222C1C9R2CD05# 100pF ±0.5pF GRM0222C1C9R2DD05# 9.3pF ±0.05pF GRM0222C1C9R3WD05# CH 56pF Low ESL LLp Series ±0.1pF GRM0222C1C9R3BD05# ±0.25pF GRM0222C1C9R3CD05# 68pF ±0.5pF GRM0222C1C9R3DD05# 9.4pF ±0.05pF GRM0222C1C9R4WD05# 82pF ±0.1pF GRM0222C1C9R4BD05# ±0.25pF GRM0222C1C9R4CD05# 100pF ±0.5pF GRM0222C1C9R4DD05# High-Q Type GJM Series 9.5pF ±0.05pF GRM0222C1C9R5WD05# ±0.1pF GRM0222C1C9R5BD05# ±0.25pF GRM0222C1C9R5CD05# ±0.5pF GRM0222C1C9R5DD05# 9.6pF ±0.05pF GRM0222C1C9R6WD05# ±0.1pF GRM0222C1C9R6BD05# c 0.6×0.3mm T max. Ultracompact Rated TC Voltage Code 0.33mm 50Vdc C0G Cap. High Frequency GQM Series ±0.5pF GRM0222C1C9R6DD05# 0.2pF ±0.05pF GRM0335C1HR20WA01# ±0.1pF GRM0335C1HR10BA01# ±0.1pF GRM0335C1HR20BA01# 0.3pF ±0.05pF GRM0335C1HR30WA01# 0.4pF ±0.05pF GRM0335C1HR40WA01# 0.5pF ±0.05pF GRM0335C1HR50WA01# ±0.1pF GRM0335C1HR30BA01# ±0.25pF GRM0222C1C9R7CD05# ±0.5pF GRM0222C1C9R7DD05# Monolithic Microchip GMA Series 9.8pF ±0.1pF GRM0335C1HR40BA01# ±0.05pF GRM0222C1C9R8WD05# ±0.1pF GRM0222C1C9R8BD05# ±0.1pF GRM0335C1HR50BA01# ±0.25pF GRM0222C1C9R8CD05# ±0.5pF GRM0222C1C9R8DD05# 9.9pF 0.6pF ±0.05pF GRM0335C1HR60WA01# 0.7pF ±0.05pF GRM0335C1HR70WA01# 0.8pF ±0.05pF GRM0335C1HR80WA01# 0.9pF ±0.05pF GRM0335C1HR90WA01# 1.0pF ±0.05pF GRM0335C1H1R0WA01# ±0.1pF GRM0335C1HR60BA01# ±0.05pF GRM0222C1C9R9WD05# ±0.1pF GRM0222C1C9R9BD05# ±0.1pF GRM0335C1HR70BA01# ±0.25pF GRM0222C1C9R9CD05# ±0.5pF GRM0222C1C9R9DD05# For Bonding GMD Series 10pF 12pF 15pF ±2% GRM0222C1C100GD05# ±5% GRM0222C1C100JD05# ±2% GRM0222C1C120GD05# ±5% GRM0222C1C120JD05# ±2% GRM0222C1C150GD05# Part Number ±0.05pF GRM0335C1HR10WA01# ±0.05pF GRM0222C1C9R7WD05# ±0.1pF GRM0222C1C9R7BD05# Tol. 0.1pF ±0.25pF GRM0222C1C9R6CD05# 9.7pF Part Number ±0.1pF GRM0335C1HR80BA01# ±0.1pF GRM0335C1HR90BA01# ±0.1pF GRM0335C1H1R0BA01# ±0.25pF GRM0335C1H1R0CA01# Product Information ±5% GRM0222C1C150JD05# 18pF ±2% GRM0222C1C180GD05# ±5% GRM0222C1C180JD05# ±0.1pF GRM0335C1H1R1BA01# 22pF ±2% GRM0222C1C220GD05# ±0.25pF GRM0335C1H1R1CA01# ±5% GRM0222C1C220JD05# 27pF ±2% GRM0222C1C270GD05# ±5% GRM0222C1C270JD05# 1.1pF 1.2pF ±0.05pF GRM0335C1H1R1WA01# ±0.05pF GRM0335C1H1R2WA01# ±0.1pF GRM0335C1H1R2BA01# ±0.25pF GRM0335C1H1R2CA01# Part number # indicates the package specification code. 28 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 0.6×0.3mm) C0G 3.1pF 1.7pF 1.8pF 1.9pF 2.0pF 2.1pF ±0.1pF GRM0335C1H3R1BA01# ±0.25pF GRM0335C1H3R1CA01# ±0.05pF GRM0335C1H1R4WA01# 3.2pF ±0.05pF GRM0335C1H1R5WA01# ±0.25pF GRM0335C1H3R2CA01# 3.3pF 2.4pF 2.5pF 2.6pF 2.7pF 2.8pF ±0.1pF GRM0335C1H1R5BA01# ±0.1pF GRM0335C1H3R3BA01# ±0.25pF GRM0335C1H3R3CA01# ±0.05pF GRM0335C1H1R6WA01# 3.4pF ±0.1pF GRM0335C1H1R6BA01# ±0.1pF GRM0335C1H3R4BA01# ±0.25pF GRM0335C1H3R4CA01# ±0.05pF GRM0335C1H1R7WA01# 3.5pF ±0.05pF GRM0335C1H3R5WA01# ±0.1pF GRM0335C1H1R7BA01# ±0.1pF GRM0335C1H3R5BA01# ±0.25pF GRM0335C1H1R7CA01# ±0.25pF GRM0335C1H3R5CA01# ±0.05pF GRM0335C1H1R8WA01# 3.6pF ±0.05pF GRM0335C1H3R6WA01# ±0.1pF GRM0335C1H1R8BA01# ±0.1pF GRM0335C1H3R6BA01# ±0.25pF GRM0335C1H1R8CA01# ±0.25pF GRM0335C1H3R6CA01# ±0.05pF GRM0335C1H1R9WA01# 3.7pF ±0.05pF GRM0335C1H3R7WA01# ±0.1pF GRM0335C1H1R9BA01# ±0.1pF GRM0335C1H3R7BA01# ±0.25pF GRM0335C1H1R9CA01# ±0.25pF GRM0335C1H3R7CA01# ±0.05pF GRM0335C1H2R0WA01# 3.8pF ±0.05pF GRM0335C1H3R8WA01# ±0.1pF GRM0335C1H2R0BA01# ±0.1pF GRM0335C1H3R8BA01# ±0.25pF GRM0335C1H2R0CA01# ±0.25pF GRM0335C1H3R8CA01# ±0.05pF GRM0335C1H2R1WA01# 3.9pF ±0.05pF GRM0335C1H2R2WA01# ±0.05pF GRM0335C1H3R9WA01# ±0.1pF GRM0335C1H3R9BA01# ±0.25pF GRM0335C1H3R9CA01# 4.0pF ±0.05pF GRM0335C1H4R0WA01# ±0.1pF GRM0335C1H2R2BA01# ±0.1pF GRM0335C1H4R0BA01# ±0.25pF GRM0335C1H2R2CA01# ±0.25pF GRM0335C1H4R0CA01# ±0.05pF GRM0335C1H2R3WA01# 4.1pF ±0.05pF GRM0335C1H4R1WA01# ±0.1pF GRM0335C1H2R3BA01# ±0.1pF GRM0335C1H4R1BA01# ±0.25pF GRM0335C1H2R3CA01# ±0.25pF GRM0335C1H4R1CA01# ±0.05pF GRM0335C1H2R4WA01# 4.2pF ±0.05pF GRM0335C1H4R2WA01# ±0.1pF GRM0335C1H2R4BA01# ±0.1pF GRM0335C1H4R2BA01# ±0.25pF GRM0335C1H2R4CA01# ±0.25pF GRM0335C1H4R2CA01# ±0.05pF GRM0335C1H2R5WA01# 4.3pF ±0.05pF GRM0335C1H4R3WA01# ±0.1pF GRM0335C1H2R5BA01# ±0.1pF GRM0335C1H4R3BA01# ±0.25pF GRM0335C1H2R5CA01# ±0.25pF GRM0335C1H4R3CA01# ±0.05pF GRM0335C1H2R6WA01# 4.4pF ±0.05pF GRM0335C1H4R4WA01# ±0.1pF GRM0335C1H2R6BA01# ±0.1pF GRM0335C1H4R4BA01# ±0.25pF GRM0335C1H2R6CA01# ±0.25pF GRM0335C1H4R4CA01# ±0.05pF GRM0335C1H2R7WA01# 4.5pF ±0.05pF GRM0335C1H4R5WA01# ±0.1pF GRM0335C1H2R7BA01# ±0.1pF GRM0335C1H4R5BA01# ±0.25pF GRM0335C1H2R7CA01# ±0.25pF GRM0335C1H4R5CA01# ±0.05pF GRM0335C1H2R8WA01# 4.6pF ±0.05pF GRM0335C1H2R9WA01# ±0.05pF GRM0335C1H4R6WA01# ±0.1pF GRM0335C1H4R6BA01# ±0.25pF GRM0335C1H2R8CA01# 3.0pF ±0.05pF GRM0335C1H3R4WA01# ±0.25pF GRM0335C1H1R6CA01# ±0.1pF GRM0335C1H2R8BA01# 2.9pF ±0.05pF GRM0335C1H3R3WA01# ±0.25pF GRM0335C1H1R5CA01# ±0.25pF GRM0335C1H2R1CA01# 2.3pF ±0.05pF GRM0335C1H3R2WA01# ±0.1pF GRM0335C1H3R2BA01# ±0.1pF GRM0335C1H2R1BA01# 2.2pF ±0.05pF GRM0335C1H3R1WA01# ±0.25pF GRM0335C1H1R3CA01# ±0.25pF GRM0335C1H1R4CA01# 1.6pF Part Number ±0.1pF GRM0335C1H1R3BA01# ±0.1pF GRM0335C1H1R4BA01# 1.5pF Tol. ±0.25pF GRM0335C1H4R6CA01# 4.7pF ±0.05pF GRM0335C1H4R7WA01# ±0.1pF GRM0335C1H2R9BA01# ±0.1pF GRM0335C1H4R7BA01# ±0.25pF GRM0335C1H2R9CA01# ±0.25pF GRM0335C1H4R7CA01# ±0.05pF GRM0335C1H3R0WA01# ±0.1pF GRM0335C1H3R0BA01# ±0.25pF GRM0335C1H3R0CA01# For General Purpose GRM Series 0.33mm 50Vdc Cap. Capacitor Array GNM Series Rated TC Voltage Code Low ESL LLp Series 1.4pF ±0.05pF GRM0335C1H1R3WA01# T max. High-Q Type GJM Series 1.3pF Part Number High Frequency GQM Series C0G Tol. Monolithic Microchip GMA Series 0.33mm 50Vdc Cap. For Bonding GMD Series Rated TC Voltage Code 4.8pF Product Information T max. ±0.05pF GRM0335C1H4R8WA01# ±0.1pF GRM0335C1H4R8BA01# ±0.25pF GRM0335C1H4R8CA01# Part number # indicates the package specification code. 29 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 0.6×0.3mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.33mm 50Vdc C0G Cap. 4.9pF 5.0pF Tol. Part Number ±0.05pF GRM0335C1H4R9WA01# Rated TC Voltage Code 0.33mm 50Vdc C0G Cap. 6.3pF ±0.1pF GRM0335C1H6R3BA01# ±0.05pF GRM0335C1H5R0WA01# ±0.5pF GRM0335C1H6R3DA01# 6.4pF ±0.25pF GRM0335C1H5R0CA01# ±0.1pF GRM0335C1H6R4BA01# ±0.25pF GRM0335C1H6R4CA01# ±0.5pF GRM0335C1H6R4DA01# Capacitor Array GNM Series 6.5pF ±0.1pF GRM0335C1H6R5BA01# ±0.05pF GRM0335C1H5R2WA01# ±0.25pF GRM0335C1H6R5CA01# ±0.5pF GRM0335C1H6R5DA01# 6.6pF Low ESL LLp Series ±0.5pF GRM0335C1H5R2DA01# ±0.1pF GRM0335C1H6R6BA01# ±0.25pF GRM0335C1H6R6CA01# ±0.1pF GRM0335C1H5R3BA01# ±0.5pF GRM0335C1H6R6DA01# 6.7pF ±0.1pF GRM0335C1H6R7BA01# ±0.05pF GRM0335C1H5R4WA01# ±0.25pF GRM0335C1H6R7CA01# ±0.1pF GRM0335C1H5R4BA01# ±0.5pF GRM0335C1H6R7DA01# 6.8pF High-Q Type GJM Series ±0.5pF GRM0335C1H5R4DA01# ±0.1pF GRM0335C1H6R8BA01# ±0.25pF GRM0335C1H6R8CA01# ±0.1pF GRM0335C1H5R5BA01# ±0.5pF GRM0335C1H6R8DA01# 6.9pF ±0.1pF GRM0335C1H6R9BA01# ±0.05pF GRM0335C1H5R6WA01# ±0.25pF GRM0335C1H6R9CA01# High Frequency GQM Series ±0.25pF GRM0335C1H5R6CA01# ±0.5pF GRM0335C1H6R9DA01# 7.0pF ±0.5pF GRM0335C1H5R6DA01# ±0.1pF GRM0335C1H7R0BA01# ±0.25pF GRM0335C1H7R0CA01# ±0.1pF GRM0335C1H5R7BA01# ±0.5pF GRM0335C1H7R0DA01# 7.1pF Monolithic Microchip GMA Series ±0.5pF GRM0335C1H5R7DA01# ±0.1pF GRM0335C1H7R1BA01# ±0.25pF GRM0335C1H7R1CA01# ±0.1pF GRM0335C1H5R8BA01# ±0.5pF GRM0335C1H7R1DA01# 7.2pF ±0.05pF GRM0335C1H7R2WA01# ±0.5pF GRM0335C1H5R8DA01# ±0.1pF GRM0335C1H7R2BA01# ±0.05pF GRM0335C1H5R9WA01# ±0.25pF GRM0335C1H7R2CA01# ±0.1pF GRM0335C1H5R9BA01# ±0.25pF GRM0335C1H5R9CA01# ±0.5pF GRM0335C1H7R2DA01# 7.3pF ±0.05pF GRM0335C1H7R3WA01# For Bonding GMD Series ±0.5pF GRM0335C1H5R9DA01# ±0.1pF GRM0335C1H7R3BA01# ±0.05pF GRM0335C1H6R0WA01# ±0.25pF GRM0335C1H7R3CA01# ±0.1pF GRM0335C1H6R0BA01# ±0.25pF GRM0335C1H6R0CA01# ±0.5pF GRM0335C1H7R3DA01# 7.4pF ±0.05pF GRM0335C1H7R4WA01# ±0.5pF GRM0335C1H6R0DA01# ±0.1pF GRM0335C1H7R4BA01# ±0.05pF GRM0335C1H6R1WA01# ±0.25pF GRM0335C1H7R4CA01# ±0.1pF GRM0335C1H6R1BA01# Product Information ±0.25pF GRM0335C1H6R1CA01# 6.2pF ±0.05pF GRM0335C1H7R1WA01# ±0.05pF GRM0335C1H5R8WA01# ±0.25pF GRM0335C1H5R8CA01# 6.1pF ±0.05pF GRM0335C1H7R0WA01# ±0.05pF GRM0335C1H5R7WA01# ±0.25pF GRM0335C1H5R7CA01# 6.0pF ±0.05pF GRM0335C1H6R9WA01# ±0.5pF GRM0335C1H5R5DA01# ±0.1pF GRM0335C1H5R6BA01# 5.9pF ±0.05pF GRM0335C1H6R8WA01# ±0.05pF GRM0335C1H5R5WA01# ±0.25pF GRM0335C1H5R5CA01# 5.8pF ±0.05pF GRM0335C1H6R7WA01# ±0.5pF GRM0335C1H5R3DA01# ±0.25pF GRM0335C1H5R4CA01# 5.7pF ±0.05pF GRM0335C1H6R6WA01# ±0.05pF GRM0335C1H5R3WA01# ±0.25pF GRM0335C1H5R3CA01# 5.6pF ±0.05pF GRM0335C1H6R5WA01# ±0.5pF GRM0335C1H5R1DA01# ±0.25pF GRM0335C1H5R2CA01# 5.5pF ±0.05pF GRM0335C1H6R4WA01# ±0.05pF GRM0335C1H5R1WA01# ±0.1pF GRM0335C1H5R2BA01# 5.4pF ±0.05pF GRM0335C1H6R3WA01# ±0.25pF GRM0335C1H6R3CA01# ±0.1pF GRM0335C1H5R1BA01# 5.3pF Part Number ±0.25pF GRM0335C1H4R9CA01# ±0.25pF GRM0335C1H5R1CA01# 5.2pF Tol. ±0.1pF GRM0335C1H4R9BA01# ±0.1pF GRM0335C1H5R0BA01# 5.1pF T max. ±0.5pF GRM0335C1H7R4DA01# 7.5pF ±0.05pF GRM0335C1H7R5WA01# ±0.5pF GRM0335C1H6R1DA01# ±0.1pF GRM0335C1H7R5BA01# ±0.05pF GRM0335C1H6R2WA01# ±0.25pF GRM0335C1H7R5CA01# ±0.5pF GRM0335C1H7R5DA01# ±0.1pF GRM0335C1H6R2BA01# ±0.25pF GRM0335C1H6R2CA01# ±0.5pF GRM0335C1H6R2DA01# 7.6pF ±0.05pF GRM0335C1H7R6WA01# ±0.1pF GRM0335C1H7R6BA01# Part number # indicates the package specification code. 30 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 0.6×0.3mm) C0G 9.0pF ±0.1pF GRM0335C1H9R0BA01# ±0.25pF GRM0335C1H9R0CA01# ±0.5pF GRM0335C1H9R0DA01# 9.1pF ±0.5pF GRM0335C1H7R7DA01# ±0.1pF GRM0335C1H9R1BA01# ±0.25pF GRM0335C1H9R1CA01# ±0.1pF GRM0335C1H7R8BA01# ±0.5pF GRM0335C1H9R1DA01# 9.2pF ±0.1pF GRM0335C1H9R2BA01# ±0.05pF GRM0335C1H7R9WA01# ±0.25pF GRM0335C1H9R2CA01# ±0.25pF GRM0335C1H7R9CA01# ±0.5pF GRM0335C1H9R2DA01# 9.3pF ±0.5pF GRM0335C1H7R9DA01# ±0.1pF GRM0335C1H9R3BA01# ±0.25pF GRM0335C1H9R3CA01# ±0.1pF GRM0335C1H8R0BA01# ±0.5pF GRM0335C1H9R3DA01# 9.4pF ±0.1pF GRM0335C1H9R4BA01# ±0.05pF GRM0335C1H8R1WA01# ±0.25pF GRM0335C1H9R4CA01# ±0.1pF GRM0335C1H8R1BA01# ±0.5pF GRM0335C1H9R4DA01# 9.5pF ±0.5pF GRM0335C1H8R1DA01# ±0.1pF GRM0335C1H9R5BA01# ±0.25pF GRM0335C1H9R5CA01# ±0.1pF GRM0335C1H8R2BA01# ±0.5pF GRM0335C1H9R5DA01# 9.6pF ±0.1pF GRM0335C1H9R6BA01# ±0.05pF GRM0335C1H8R3WA01# ±0.25pF GRM0335C1H9R6CA01# ±0.25pF GRM0335C1H8R3CA01# ±0.5pF GRM0335C1H9R6DA01# 9.7pF ±0.5pF GRM0335C1H8R3DA01# ±0.1pF GRM0335C1H9R7BA01# ±0.25pF GRM0335C1H9R7CA01# ±0.1pF GRM0335C1H8R4BA01# ±0.5pF GRM0335C1H9R7DA01# 9.8pF ±0.5pF GRM0335C1H8R4DA01# ±0.1pF GRM0335C1H9R8BA01# ±0.25pF GRM0335C1H9R8CA01# ±0.1pF GRM0335C1H8R5BA01# ±0.5pF GRM0335C1H9R8DA01# 9.9pF ±0.5pF GRM0335C1H8R5DA01# ±0.1pF GRM0335C1H9R9BA01# ±0.25pF GRM0335C1H9R9CA01# ±0.1pF GRM0335C1H8R6BA01# ±0.5pF GRM0335C1H9R9DA01# 10pF ±0.5pF GRM0335C1H8R6DA01# ±0.05pF GRM0335C1H8R7WA01# 12pF ±0.1pF GRM0335C1H8R7BA01# ±0.25pF GRM0335C1H8R7CA01# 15pF ±0.5pF GRM0335C1H8R7DA01# ±0.05pF GRM0335C1H8R8WA01# 18pF ±0.1pF GRM0335C1H8R8BA01# ±0.25pF GRM0335C1H8R8CA01# 22pF ±0.5pF GRM0335C1H8R8DA01# 8.9pF ±0.05pF GRM0335C1H9R9WA01# ±0.05pF GRM0335C1H8R6WA01# ±0.25pF GRM0335C1H8R6CA01# 8.8pF ±0.05pF GRM0335C1H9R8WA01# ±0.05pF GRM0335C1H8R5WA01# ±0.25pF GRM0335C1H8R5CA01# 8.7pF ±0.05pF GRM0335C1H9R7WA01# ±0.05pF GRM0335C1H8R4WA01# ±0.25pF GRM0335C1H8R4CA01# 8.6pF ±0.05pF GRM0335C1H9R6WA01# ±0.5pF GRM0335C1H8R2DA01# ±0.1pF GRM0335C1H8R3BA01# 8.5pF ±0.05pF GRM0335C1H9R5WA01# ±0.05pF GRM0335C1H8R2WA01# ±0.25pF GRM0335C1H8R2CA01# 8.4pF ±0.05pF GRM0335C1H9R4WA01# ±0.5pF GRM0335C1H8R0DA01# ±0.25pF GRM0335C1H8R1CA01# 8.3pF ±0.05pF GRM0335C1H9R3WA01# ±0.05pF GRM0335C1H8R0WA01# ±0.25pF GRM0335C1H8R0CA01# 8.2pF ±0.05pF GRM0335C1H9R2WA01# ±0.5pF GRM0335C1H7R8DA01# ±0.1pF GRM0335C1H7R9BA01# 8.1pF ±0.05pF GRM0335C1H9R1WA01# ±0.05pF GRM0335C1H7R8WA01# ±0.25pF GRM0335C1H7R8CA01# 8.0pF ±0.05pF GRM0335C1H9R0WA01# ±0.05pF GRM0335C1H7R7WA01# ±0.1pF GRM0335C1H7R7BA01# 7.9pF Part Number ±0.5pF GRM0335C1H7R6DA01# ±0.25pF GRM0335C1H7R7CA01# 7.8pF Tol. ±0.05pF GRM0335C1H8R9WA01# 27pF ±0.1pF GRM0335C1H8R9BA01# ±0.25pF GRM0335C1H8R9CA01# ±0.5pF GRM0335C1H8R9DA01# For General Purpose GRM Series 0.33mm 50Vdc Cap. Capacitor Array GNM Series Rated TC Voltage Code Low ESL LLp Series 7.7pF ±0.25pF GRM0335C1H7R6CA01# T max. High-Q Type GJM Series 7.6pF Part Number High Frequency GQM Series C0G Tol. Monolithic Microchip GMA Series 0.33mm 50Vdc Cap. 33pF ±2% GRM0335C1H100GA01# ±5% GRM0335C1H100JA01# ±2% GRM0335C1H120GA01# ±5% GRM0335C1H120JA01# ±2% GRM0335C1H150GA01# ±5% GRM0335C1H150JA01# ±2% GRM0335C1H180GA01# ±5% GRM0335C1H180JA01# ±2% GRM0335C1H220GA01# ±5% GRM0335C1H220JA01# ±2% GRM0335C1H270GA01# ±5% GRM0335C1H270JA01# ±2% GRM0335C1H330GA01# ±5% GRM0335C1H330JA01# For Bonding GMD Series Rated TC Voltage Code Product Information T max. Part number # indicates the package specification code. 31 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 0.6×0.3mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.33mm 50Vdc C0G Capacitor Array GNM Series CK Rated TC Voltage Code Tol. 39pF ±2% GRM0335C1H390GA01# ±5% GRM0335C1H390JA01# ±0.1pF GRM0334C1H1R8BA01# 47pF ±2% GRM0335C1H470GA01# ±0.25pF GRM0334C1H1R8CA01# ±5% GRM0335C1H470JA01# 56pF ±2% GRM0335C1H560GA01# ±5% GRM0335C1H560JA01# 68pF ±2% GRM0335C1H680GA01# ±5% GRM0335C1H680JA01# ±0.1pF GRM0334C1H2R0BA01# 82pF ±2% GRM0335C1H820GA01# ±0.25pF GRM0334C1H2R0CA01# ±5% GRM0335C1H820JA01# ±2% GRM0335C1H101GA01# ±0.1pF GRM0333C1H2R1BA01# ±5% GRM0335C1H101JA01# ±0.25pF GRM0333C1H2R1CA01# 100pF 0.1pF 0.2pF Part Number T max. Cap. ±0.05pF GRM0334C1HR10WA01# Low ESL LLp Series 0.4pF CK 1.8pF 1.9pF Tol. Part Number ±0.05pF GRM0334C1H1R8WA01# ±0.05pF GRM0334C1H1R9WA01# ±0.1pF GRM0334C1H1R9BA01# ±0.25pF GRM0334C1H1R9CA01# 2.0pF CJ 2.1pF 2.2pF ±0.05pF GRM0334C1H2R0WA01# ±0.05pF GRM0333C1H2R1WA01# ±0.05pF GRM0333C1H2R2WA01# ±0.1pF GRM0334C1HR10BA01# ±0.1pF GRM0333C1H2R2BA01# ±0.05pF GRM0334C1HR20WA01# ±0.25pF GRM0333C1H2R2CA01# ±0.1pF GRM0334C1HR20BA01# 0.3pF 0.33mm 50Vdc Cap. 2.3pF ±0.05pF GRM0333C1H2R3WA01# ±0.05pF GRM0334C1HR30WA01# ±0.1pF GRM0333C1H2R3BA01# ±0.1pF GRM0334C1HR30BA01# ±0.25pF GRM0333C1H2R3CA01# ±0.05pF GRM0334C1HR40WA01# 2.4pF ±0.05pF GRM0333C1H2R4WA01# ±0.1pF GRM0334C1HR40BA01# ±0.1pF GRM0333C1H2R4BA01# 0.5pF ±0.05pF GRM0334C1HR50WA01# ±0.25pF GRM0333C1H2R4CA01# 0.6pF ±0.05pF GRM0334C1HR60WA01# ±0.1pF GRM0333C1H2R5BA01# ±0.1pF GRM0334C1HR60BA01# ±0.25pF GRM0333C1H2R5CA01# ±0.1pF GRM0334C1HR50BA01# High-Q Type GJM Series 0.7pF ±0.05pF GRM0334C1HR70WA01# 2.5pF 2.6pF ±0.1pF GRM0334C1HR70BA01# 0.8pF High Frequency GQM Series 0.9pF 1.0pF 1.1pF Monolithic Microchip GMA Series 1.2pF 1.3pF For Bonding GMD Series 1.4pF 1.5pF ±0.25pF GRM0333C1H2R6CA01# 2.7pF ±0.1pF GRM0333C1H2R7BA01# ±0.1pF GRM0334C1HR90BA01# ±0.25pF GRM0333C1H2R7CA01# ±0.05pF GRM0334C1H1R0WA01# 2.8pF ±0.05pF GRM0333C1H2R8WA01# ±0.1pF GRM0334C1H1R0BA01# ±0.1pF GRM0333C1H2R8BA01# ±0.25pF GRM0334C1H1R0CA01# ±0.25pF GRM0333C1H2R8CA01# ±0.05pF GRM0334C1H1R1WA01# 2.9pF ±0.05pF GRM0333C1H2R9WA01# ±0.1pF GRM0334C1H1R1BA01# ±0.1pF GRM0333C1H2R9BA01# ±0.25pF GRM0334C1H1R1CA01# ±0.25pF GRM0333C1H2R9CA01# ±0.05pF GRM0334C1H1R2WA01# 3.0pF ±0.05pF GRM0333C1H3R0WA01# ±0.1pF GRM0334C1H1R2BA01# ±0.1pF GRM0333C1H3R0BA01# ±0.25pF GRM0334C1H1R2CA01# ±0.25pF GRM0333C1H3R0CA01# ±0.05pF GRM0334C1H1R3WA01# 3.1pF ±0.05pF GRM0333C1H3R1WA01# ±0.1pF GRM0334C1H1R3BA01# ±0.1pF GRM0333C1H3R1BA01# ±0.25pF GRM0334C1H1R3CA01# ±0.25pF GRM0333C1H3R1CA01# ±0.05pF GRM0334C1H1R4WA01# 3.2pF ±0.05pF GRM0333C1H3R2WA01# ±0.1pF GRM0334C1H1R4BA01# ±0.1pF GRM0333C1H3R2BA01# ±0.25pF GRM0334C1H1R4CA01# ±0.25pF GRM0333C1H3R2CA01# ±0.05pF GRM0334C1H1R5WA01# 3.3pF Product Information ±0.05pF GRM0334C1H1R6WA01# ±0.05pF GRM0333C1H3R3WA01# ±0.1pF GRM0333C1H3R3BA01# ±0.25pF GRM0334C1H1R5CA01# 1.7pF ±0.05pF GRM0333C1H2R7WA01# ±0.05pF GRM0334C1HR90WA01# ±0.1pF GRM0334C1H1R5BA01# 1.6pF ±0.05pF GRM0333C1H2R6WA01# ±0.1pF GRM0333C1H2R6BA01# ±0.05pF GRM0334C1HR80WA01# ±0.1pF GRM0334C1HR80BA01# ±0.05pF GRM0333C1H2R5WA01# ±0.25pF GRM0333C1H3R3CA01# 3.4pF ±0.05pF GRM0333C1H3R4WA01# ±0.1pF GRM0334C1H1R6BA01# ±0.1pF GRM0333C1H3R4BA01# ±0.25pF GRM0334C1H1R6CA01# ±0.25pF GRM0333C1H3R4CA01# ±0.05pF GRM0334C1H1R7WA01# ±0.1pF GRM0334C1H1R7BA01# ±0.25pF GRM0334C1H1R7CA01# 3.5pF ±0.05pF GRM0333C1H3R5WA01# ±0.1pF GRM0333C1H3R5BA01# ±0.25pF GRM0333C1H3R5CA01# Part number # indicates the package specification code. 32 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 0.6×0.3mm) CH 5.3pF ±0.1pF GRM0333C1H3R6BA01# 3.8pF ±0.05pF GRM0333C1H3R7WA01# ±0.5pF GRM0332C1H5R3DA01# 5.4pF ±0.25pF GRM0333C1H3R7CA01# ±0.25pF GRM0332C1H5R4CA01# ±0.05pF GRM0333C1H3R8WA01# ±0.5pF GRM0332C1H5R4DA01# 5.5pF 4.1pF 4.2pF ±0.25pF GRM0333C1H3R8CA01# ±0.1pF GRM0332C1H5R5BA01# ±0.25pF GRM0332C1H5R5CA01# ±0.5pF GRM0332C1H5R5DA01# 5.6pF ±0.1pF GRM0332C1H5R6BA01# ±0.1pF GRM0332C1H4R0BA01# ±0.25pF GRM0332C1H5R6CA01# ±0.25pF GRM0332C1H4R0CA01# ±0.5pF GRM0332C1H5R6DA01# ±0.05pF GRM0332C1H4R1WA01# 5.7pF ±0.1pF GRM0332C1H4R1BA01# ±0.1pF GRM0332C1H5R7BA01# ±0.25pF GRM0332C1H5R7CA01# ±0.05pF GRM0332C1H4R2WA01# ±0.5pF GRM0332C1H5R7DA01# 5.8pF ±0.1pF GRM0332C1H5R8BA01# ±0.05pF GRM0332C1H4R3WA01# ±0.25pF GRM0332C1H5R8CA01# ±0.5pF GRM0332C1H5R8DA01# 5.9pF ±0.1pF GRM0332C1H5R9BA01# ±0.1pF GRM0332C1H4R4BA01# ±0.25pF GRM0332C1H5R9CA01# ±0.05pF GRM0332C1H4R5WA01# ±0.5pF GRM0332C1H5R9DA01# 6.0pF ±0.1pF GRM0332C1H4R5BA01# ±0.1pF GRM0332C1H6R0BA01# ±0.25pF GRM0332C1H6R0CA01# ±0.05pF GRM0332C1H4R6WA01# ±0.5pF GRM0332C1H6R0DA01# 6.1pF ±0.1pF GRM0332C1H6R1BA01# ±0.05pF GRM0332C1H4R7WA01# ±0.25pF GRM0332C1H6R1CA01# ±0.1pF GRM0332C1H4R7BA01# ±0.5pF GRM0332C1H6R1DA01# 6.2pF 5.0pF ±0.1pF GRM0332C1H6R2BA01# ±0.1pF GRM0332C1H4R8BA01# ±0.25pF GRM0332C1H6R2CA01# ±0.05pF GRM0332C1H4R9WA01# ±0.1pF GRM0332C1H6R3BA01# ±0.25pF GRM0332C1H6R3CA01# ±0.05pF GRM0332C1H5R0WA01# ±0.5pF GRM0332C1H6R3DA01# 6.4pF ±0.05pF GRM0332C1H6R4WA01# ±0.25pF GRM0332C1H5R0CA01# ±0.1pF GRM0332C1H6R4BA01# ±0.05pF GRM0332C1H5R1WA01# ±0.25pF GRM0332C1H6R4CA01# ±0.1pF GRM0332C1H5R1BA01# ±0.5pF GRM0332C1H6R4DA01# 6.5pF ±0.05pF GRM0332C1H6R5WA01# ±0.5pF GRM0332C1H5R1DA01# ±0.1pF GRM0332C1H6R5BA01# ±0.05pF GRM0332C1H5R2WA01# ±0.25pF GRM0332C1H6R5CA01# ±0.1pF GRM0332C1H5R2BA01# ±0.25pF GRM0332C1H5R2CA01# ±0.5pF GRM0332C1H5R2DA01# 5.3pF ±0.05pF GRM0332C1H6R3WA01# ±0.1pF GRM0332C1H4R9BA01# ±0.25pF GRM0332C1H5R1CA01# 5.2pF ±0.5pF GRM0332C1H6R2DA01# 6.3pF ±0.25pF GRM0332C1H4R9CA01# ±0.1pF GRM0332C1H5R0BA01# 5.1pF ±0.05pF GRM0332C1H6R2WA01# ±0.05pF GRM0332C1H4R8WA01# ±0.25pF GRM0332C1H4R8CA01# 4.9pF ±0.05pF GRM0332C1H6R1WA01# ±0.25pF GRM0332C1H4R6CA01# ±0.25pF GRM0332C1H4R7CA01# 4.8pF ±0.05pF GRM0332C1H6R0WA01# ±0.25pF GRM0332C1H4R5CA01# ±0.1pF GRM0332C1H4R6BA01# 4.7pF ±0.05pF GRM0332C1H5R9WA01# ±0.05pF GRM0332C1H4R4WA01# ±0.25pF GRM0332C1H4R4CA01# 4.6pF ±0.05pF GRM0332C1H5R8WA01# ±0.25pF GRM0332C1H4R2CA01# ±0.25pF GRM0332C1H4R3CA01# 4.5pF ±0.05pF GRM0332C1H5R7WA01# ±0.25pF GRM0332C1H4R1CA01# ±0.1pF GRM0332C1H4R3BA01# 4.4pF ±0.05pF GRM0332C1H5R6WA01# ±0.05pF GRM0332C1H4R0WA01# ±0.1pF GRM0332C1H4R2BA01# 4.3pF ±0.05pF GRM0332C1H5R5WA01# ±0.05pF GRM0333C1H3R9WA01# ±0.1pF GRM0333C1H3R9BA01# 4.0pF ±0.05pF GRM0332C1H5R4WA01# ±0.1pF GRM0332C1H5R4BA01# ±0.25pF GRM0333C1H3R9CA01# CH ±0.1pF GRM0332C1H5R3BA01# ±0.1pF GRM0333C1H3R7BA01# ±0.1pF GRM0333C1H3R8BA01# 3.9pF Part Number ±0.25pF GRM0332C1H5R3CA01# ±0.25pF GRM0333C1H3R6CA01# 3.7pF Tol. ±0.05pF GRM0332C1H5R3WA01# For General Purpose GRM Series 0.33mm 50Vdc Cap. Capacitor Array GNM Series Rated TC Voltage Code Low ESL LLp Series ±0.05pF GRM0333C1H3R6WA01# T max. High-Q Type GJM Series 3.6pF Part Number High Frequency GQM Series CJ Tol. Monolithic Microchip GMA Series 0.33mm 50Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. ±0.5pF GRM0332C1H6R5DA01# 6.6pF ±0.05pF GRM0332C1H6R6WA01# ±0.1pF GRM0332C1H6R6BA01# ±0.25pF GRM0332C1H6R6CA01# Part number # indicates the package specification code. 33 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 0.6×0.3mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.33mm 50Vdc CH Cap. Tol. Part Number 6.6pF ±0.5pF GRM0332C1H6R6DA01# 6.7pF ±0.05pF GRM0332C1H6R7WA01# T max. Rated TC Voltage Code 0.33mm 50Vdc CH Cap. 8.0pF 6.8pF ±0.1pF GRM0332C1H8R1BA01# ±0.05pF GRM0332C1H6R8WA01# ±0.25pF GRM0332C1H8R1CA01# ±0.5pF GRM0332C1H8R1DA01# 8.2pF Capacitor Array GNM Series ±0.5pF GRM0332C1H6R8DA01# ±0.1pF GRM0332C1H8R2BA01# ±0.25pF GRM0332C1H8R2CA01# ±0.1pF GRM0332C1H6R9BA01# ±0.5pF GRM0332C1H8R2DA01# 8.3pF ±0.5pF GRM0332C1H6R9DA01# ±0.1pF GRM0332C1H8R3BA01# ±0.25pF GRM0332C1H8R3CA01# ±0.1pF GRM0332C1H7R0BA01# ±0.5pF GRM0332C1H8R3DA01# Low ESL LLp Series 8.4pF ±0.5pF GRM0332C1H7R0DA01# ±0.1pF GRM0332C1H8R4BA01# ±0.25pF GRM0332C1H8R4CA01# ±0.1pF GRM0332C1H7R1BA01# ±0.5pF GRM0332C1H8R4DA01# 8.5pF ±0.1pF GRM0332C1H8R5BA01# ±0.05pF GRM0332C1H7R2WA01# ±0.25pF GRM0332C1H8R5CA01# High-Q Type GJM Series ±0.25pF GRM0332C1H7R2CA01# ±0.5pF GRM0332C1H8R5DA01# 8.6pF ±0.5pF GRM0332C1H7R2DA01# ±0.1pF GRM0332C1H8R6BA01# ±0.25pF GRM0332C1H8R6CA01# ±0.1pF GRM0332C1H7R3BA01# ±0.5pF GRM0332C1H8R6DA01# 8.7pF High Frequency GQM Series ±0.5pF GRM0332C1H7R3DA01# ±0.1pF GRM0332C1H8R7BA01# ±0.25pF GRM0332C1H8R7CA01# ±0.1pF GRM0332C1H7R4BA01# ±0.5pF GRM0332C1H8R7DA01# 8.8pF ±0.1pF GRM0332C1H8R8BA01# ±0.05pF GRM0332C1H7R5WA01# ±0.25pF GRM0332C1H8R8CA01# Monolithic Microchip GMA Series ±0.1pF GRM0332C1H7R5BA01# ±0.5pF GRM0332C1H8R8DA01# 8.9pF ±0.1pF GRM0332C1H8R9BA01# ±0.05pF GRM0332C1H7R6WA01# ±0.25pF GRM0332C1H8R9CA01# ±0.25pF GRM0332C1H7R6CA01# ±0.5pF GRM0332C1H8R9DA01# 9.0pF ±0.5pF GRM0332C1H7R6DA01# ±0.1pF GRM0332C1H9R0BA01# ±0.25pF GRM0332C1H9R0CA01# For Bonding GMD Series ±0.1pF GRM0332C1H7R7BA01# ±0.5pF GRM0332C1H9R0DA01# 9.1pF ±0.05pF GRM0332C1H9R1WA01# ±0.5pF GRM0332C1H7R7DA01# ±0.1pF GRM0332C1H9R1BA01# ±0.05pF GRM0332C1H7R8WA01# ±0.25pF GRM0332C1H9R1CA01# ±0.1pF GRM0332C1H7R8BA01# ±0.5pF GRM0332C1H9R1DA01# ±0.25pF GRM0332C1H7R8CA01# 9.2pF ±0.05pF GRM0332C1H9R2WA01# Product Information ±0.5pF GRM0332C1H7R8DA01# ±0.1pF GRM0332C1H9R2BA01# ±0.05pF GRM0332C1H7R9WA01# ±0.25pF GRM0332C1H9R2CA01# ±0.1pF GRM0332C1H7R9BA01# ±0.25pF GRM0332C1H7R9CA01# ±0.5pF GRM0332C1H7R9DA01# 8.0pF ±0.05pF GRM0332C1H9R0WA01# ±0.05pF GRM0332C1H7R7WA01# ±0.25pF GRM0332C1H7R7CA01# 7.9pF ±0.05pF GRM0332C1H8R9WA01# ±0.5pF GRM0332C1H7R5DA01# ±0.1pF GRM0332C1H7R6BA01# 7.8pF ±0.05pF GRM0332C1H8R8WA01# ±0.5pF GRM0332C1H7R4DA01# ±0.25pF GRM0332C1H7R5CA01# 7.7pF ±0.05pF GRM0332C1H8R7WA01# ±0.05pF GRM0332C1H7R4WA01# ±0.25pF GRM0332C1H7R4CA01# 7.6pF ±0.05pF GRM0332C1H8R6WA01# ±0.05pF GRM0332C1H7R3WA01# ±0.25pF GRM0332C1H7R3CA01# 7.5pF ±0.05pF GRM0332C1H8R5WA01# ±0.5pF GRM0332C1H7R1DA01# ±0.1pF GRM0332C1H7R2BA01# 7.4pF ±0.05pF GRM0332C1H8R4WA01# ±0.05pF GRM0332C1H7R1WA01# ±0.25pF GRM0332C1H7R1CA01# 7.3pF ±0.05pF GRM0332C1H8R3WA01# ±0.05pF GRM0332C1H7R0WA01# ±0.25pF GRM0332C1H7R0CA01# 7.2pF ±0.05pF GRM0332C1H8R2WA01# ±0.05pF GRM0332C1H6R9WA01# ±0.25pF GRM0332C1H6R9CA01# 7.1pF ±0.05pF GRM0332C1H8R1WA01# ±0.5pF GRM0332C1H6R7DA01# ±0.25pF GRM0332C1H6R8CA01# 7.0pF ±0.1pF GRM0332C1H8R0BA01# ±0.5pF GRM0332C1H8R0DA01# 8.1pF ±0.1pF GRM0332C1H6R8BA01# 6.9pF Part Number ±0.25pF GRM0332C1H8R0CA01# ±0.1pF GRM0332C1H6R7BA01# ±0.25pF GRM0332C1H6R7CA01# Tol. ±0.05pF GRM0332C1H8R0WA01# ±0.5pF GRM0332C1H9R2DA01# 9.3pF ±0.05pF GRM0332C1H9R3WA01# ±0.1pF GRM0332C1H9R3BA01# ±0.25pF GRM0332C1H9R3CA01# Part number # indicates the package specification code. 34 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 0.6×0.3mm) ±0.5pF GRM0332C1H9R3DA01# 4.0pF ±0.25pF GRM0333U1H4R0CD01# ±0.05pF GRM0332C1H9R4WA01# 5.0pF ±0.25pF GRM0333U1H5R0CD01# ±0.1pF GRM0332C1H9R4BA01# 6.0pF ±0.5pF GRM0333U1H6R0DD01# ±0.25pF GRM0332C1H9R4CA01# 7.0pF ±0.5pF GRM0333U1H7R0DD01# ±0.5pF GRM0332C1H9R4DA01# 8.0pF ±0.5pF GRM0333U1H8R0DD01# ±0.05pF GRM0332C1H9R5WA01# 9.0pF ±0.5pF GRM0333U1H9R0DD01# ±0.1pF GRM0332C1H9R5BA01# 10pF ±5% GRM0333U1H100JD01# ±0.25pF GRM0332C1H9R5CA01# 12pF ±5% GRM0333U1H120JD01# ±0.5pF GRM0332C1H9R5DA01# 15pF ±5% GRM0333U1H150JD01# 9.7pF 9.8pF 9.9pF ±0.05pF GRM0332C1H9R6WA01# 0.33mm 50Vdc 25Vdc UJ R2H 1.0pF ±0.25pF GRM0336R1E1R0CD01# ±0.1pF GRM0332C1H9R6BA01# 2.0pF ±0.25pF GRM0336R1E2R0CD01# ±0.25pF GRM0332C1H9R6CA01# 3.0pF ±0.25pF GRM0336R1E3R0CD01# ±0.5pF GRM0332C1H9R6DA01# 4.0pF ±0.25pF GRM0336R1E4R0CD01# ±0.05pF GRM0332C1H9R7WA01# 5.0pF ±0.25pF GRM0336R1E5R0CD01# ±0.1pF GRM0332C1H9R7BA01# 6.0pF ±0.5pF GRM0336R1E6R0DD01# ±0.25pF GRM0332C1H9R7CA01# 7.0pF ±0.5pF GRM0336R1E7R0DD01# ±0.5pF GRM0332C1H9R7DA01# 8.0pF ±0.5pF GRM0336R1E8R0DD01# ±0.05pF GRM0332C1H9R8WA01# 9.0pF ±0.5pF GRM0336R1E9R0DD01# ±0.1pF GRM0332C1H9R8BA01# 10pF ±5% GRM0336R1E100JD01# ±0.25pF GRM0332C1H9R8CA01# 12pF ±5% GRM0336R1E120JD01# ±0.5pF GRM0332C1H9R8DA01# 15pF ±5% GRM0336R1E150JD01# ±0.05pF GRM0332C1H9R9WA01# 18pF ±5% GRM0336R1E180JD01# ±0.1pF GRM0332C1H9R9BA01# 22pF ±5% GRM0336R1E220JD01# ±0.25pF GRM0332C1H9R9CA01# 27pF ±5% GRM0336R1E270JD01# ±0.5pF GRM0332C1H9R9DA01# 33pF ±5% GRM0336R1E330JD01# 10pF ±2% GRM0332C1H100GA01# 39pF ±5% GRM0336R1E390JD01# ±5% GRM0332C1H100JA01# 47pF ±5% GRM0336R1E470JD01# 12pF ±2% GRM0332C1H120GA01# 56pF ±5% GRM0336R1E560JD01# ±5% GRM0332C1H120JA01# 68pF ±5% GRM0336R1E680JD01# ±2% GRM0332C1H150GA01# 82pF ±5% GRM0336R1E820JD01# ±5% GRM0332C1H150JA01# 100pF ±5% GRM0336R1E101JD01# ±2% GRM0332C1H180GA01# ±5% GRM0332C1H180JA01# ±2% GRM0332C1H220GA01# RJ 3.0pF ±0.25pF GRM0333R1E3R0CD01# ±5% GRM0332C1H220JA01# RH 4.0pF ±0.25pF GRM0332R1E4R0CD01# ±2% GRM0332C1H270GA01# 5.0pF ±0.25pF GRM0332R1E5R0CD01# ±5% GRM0332C1H270JA01# 6.0pF ±0.5pF GRM0332R1E6R0DD01# ±2% GRM0332C1H330GA01# 7.0pF ±0.5pF GRM0332R1E7R0DD01# ±5% GRM0332C1H330JA01# 8.0pF ±0.5pF GRM0332R1E8R0DD01# ±2% GRM0332C1H390GA01# 9.0pF ±0.5pF GRM0332R1E9R0DD01# ±5% GRM0332C1H390JA01# 10pF ±5% GRM0332R1E100JD01# 47pF ±2% GRM0332C1H470GA01# 12pF ±5% GRM0332R1E120JD01# ±5% GRM0332C1H470JA01# 15pF ±5% GRM0332R1E150JD01# 56pF ±2% GRM0332C1H560GA01# 18pF ±5% GRM0332R1E180JD01# ±5% GRM0332C1H560JA01# 22pF ±5% GRM0332R1E220JD01# ±2% GRM0332C1H680GA01# 27pF ±5% GRM0332R1E270JD01# ±5% GRM0332C1H680JA01# 33pF ±5% GRM0332R1E330JD01# ±2% GRM0332C1H820GA01# 39pF ±5% GRM0332R1E390JD01# ±5% GRM0332C1H820JA01# 47pF ±5% GRM0332R1E470JD01# ±2% GRM0332C1H101GA01# 56pF ±5% GRM0332R1E560JD01# ±5% GRM0332C1H101JA01# 68pF ±5% GRM0332R1E680JD01# 15pF 18pF 22pF 27pF 33pF 39pF 68pF 82pF 100pF RK 1.0pF ±0.25pF GRM0334R1E1R0CD01# 2.0pF ±0.25pF GRM0334R1E2R0CD01# 1.0pF ±0.25pF GRM0334U1H1R0CD01# 82pF ±5% GRM0332R1E820JD01# 2.0pF ±0.25pF GRM0334U1H2R0CD01# 100pF ±5% GRM0332R1E101JD01# 3.0pF ±0.25pF GRM0333U1H3R0CD01# S2H 1.0pF For General Purpose GRM Series Part Number Capacitor Array GNM Series Tol. Low ESL LLp Series Cap. High-Q Type GJM Series Rated TC Voltage Code 9.4pF 9.6pF UJ T max. 9.3pF 9.5pF UK Part Number High Frequency GQM Series CH Tol. Monolithic Microchip GMA Series 0.33mm 50Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. ±0.25pF GRM0336S1E1R0CD01# Part number # indicates the package specification code. 35 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 0.6×0.3mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.33mm 25Vdc S2H Cap. Tol. Part Number T max. Rated TC Voltage Code Cap. Tol. Part Number 2.0pF ±0.25pF GRM0336S1E2R0CD01# 15pF ±5% GRM0336T1E150JD01# 3.0pF ±0.25pF GRM0336S1E3R0CD01# 18pF ±5% GRM0336T1E180JD01# 4.0pF ±0.25pF GRM0336S1E4R0CD01# 22pF ±5% GRM0336T1E220JD01# 5.0pF ±0.25pF GRM0336S1E5R0CD01# 27pF ±5% GRM0336T1E270JD01# 6.0pF ±0.5pF GRM0336S1E6R0DD01# 33pF ±5% GRM0336T1E330JD01# 7.0pF ±0.5pF GRM0336S1E7R0DD01# 39pF ±5% GRM0336T1E390JD01# 8.0pF ±0.5pF GRM0336S1E8R0DD01# 47pF ±5% GRM0336T1E470JD01# 9.0pF ±0.5pF GRM0336S1E9R0DD01# 56pF ±5% GRM0336T1E560JD01# 0.33mm 25Vdc T2H Capacitor Array GNM Series Low ESL LLp Series 10pF ±5% GRM0336S1E100JD01# 68pF ±5% GRM0336T1E680JD01# 12pF ±5% GRM0336S1E120JD01# 82pF ±5% GRM0336T1E820JD01# 15pF ±5% GRM0336S1E150JD01# ±5% GRM0336T1E101JD01# 18pF ±5% GRM0336S1E180JD01# 22pF ±5% GRM0336S1E220JD01# 27pF ±5% GRM0336S1E270JD01# TJ 33pF ±5% GRM0336S1E330JD01# TH 39pF 100pF 1.0pF ±0.25pF GRM0334T1E1R0CD01# 2.0pF ±0.25pF GRM0334T1E2R0CD01# 3.0pF ±0.25pF GRM0333T1E3R0CD01# 4.0pF ±0.25pF GRM0332T1E4R0CD01# ±5% GRM0336S1E390JD01# 5.0pF ±0.25pF GRM0332T1E5R0CD01# 47pF ±5% GRM0336S1E470JD01# 6.0pF ±0.5pF GRM0332T1E6R0DD01# 56pF ±5% GRM0336S1E560JD01# 7.0pF ±0.5pF GRM0332T1E7R0DD01# 68pF ±5% GRM0336S1E680JD01# 8.0pF ±0.5pF GRM0332T1E8R0DD01# 82pF ±5% GRM0336S1E820JD01# 9.0pF ±0.5pF GRM0332T1E9R0DD01# 100pF ±5% GRM0336S1E101JD01# 10pF ±5% GRM0332T1E100JD01# TK 1.0pF ±0.25pF GRM0334S1E1R0CD01# 12pF ±5% GRM0332T1E120JD01# 2.0pF ±0.25pF GRM0334S1E2R0CD01# 15pF ±5% GRM0332T1E150JD01# SJ 3.0pF ±0.25pF GRM0333S1E3R0CD01# 18pF ±5% GRM0332T1E180JD01# SH 4.0pF ±0.25pF GRM0332S1E4R0CD01# 22pF ±5% GRM0332T1E220JD01# 5.0pF ±0.25pF GRM0332S1E5R0CD01# 27pF ±5% GRM0332T1E270JD01# 6.0pF ±0.5pF GRM0332S1E6R0DD01# 33pF ±5% GRM0332T1E330JD01# 7.0pF ±0.5pF GRM0332S1E7R0DD01# 39pF ±5% GRM0332T1E390JD01# 8.0pF ±0.5pF GRM0332S1E8R0DD01# 47pF ±5% GRM0332T1E470JD01# 9.0pF ±0.5pF GRM0332S1E9R0DD01# 56pF ±5% GRM0332T1E560JD01# 68pF ±5% GRM0332T1E680JD01# SK High-Q Type GJM Series High Frequency GQM Series Monolithic Microchip GMA Series 10pF ±5% GRM0332S1E100JD01# 12pF ±5% GRM0332S1E120JD01# 82pF ±5% GRM0332T1E820JD01# 15pF ±5% GRM0332S1E150JD01# 100pF ±5% GRM0332T1E101JD01# 18pF ±5% GRM0332S1E180JD01# 18pF ±5% GRM0333U1E180JD01# 22pF ±5% GRM0332S1E220JD01# 22pF ±5% GRM0333U1E220JD01# 27pF ±5% GRM0332S1E270JD01# 27pF ±5% GRM0333U1E270JD01# 33pF ±5% GRM0332S1E330JD01# 33pF ±5% GRM0333U1E330JD01# 39pF ±5% GRM0332S1E390JD01# 39pF ±5% GRM0333U1E390JD01# 47pF ±5% GRM0332S1E470JD01# 47pF ±5% GRM0333U1E470JD01# 56pF ±5% GRM0332S1E560JD01# 56pF ±5% GRM0333U1E560JD01# 68pF ±5% GRM0332S1E680JD01# 68pF ±5% GRM0333U1E680JD01# 82pF ±5% GRM0332S1E820JD01# 82pF ±5% GRM0333U1E820JD01# ±5% GRM0332S1E101JD01# 100pF ±5% GRM0333U1E101JD01# Cap. Tol. For Bonding GMD Series 100pF T2H 1.0pF ±0.25pF GRM0336T1E1R0CD01# 2.0pF ±0.25pF GRM0336T1E2R0CD01# 3.0pF ±0.25pF GRM0336T1E3R0CD01# 4.0pF ±0.25pF GRM0336T1E4R0CD01# 5.0pF ±0.25pF GRM0336T1E5R0CD01# UJ c 1.0×0.5mm T max. Rated TC Voltage Code Part Number Product Information 6.0pF ±0.5pF GRM0336T1E6R0DD01# 0.1pF ±0.1pF GRM1535C1HR10BDD5# 7.0pF ±0.5pF GRM0336T1E7R0DD01# 0.2pF ±0.1pF GRM1535C1HR20BDD5# 8.0pF ±0.5pF GRM0336T1E8R0DD01# 0.3pF ±0.1pF GRM1535C1HR30BDD5# 9.0pF ±0.5pF GRM0336T1E9R0DD01# 0.4pF ±0.1pF GRM1535C1HR40BDD5# 0.33mm 50Vdc C0G 10pF ±5% GRM0336T1E100JD01# 0.5pF ±0.1pF GRM1535C1HR50BDD5# 12pF ±5% GRM0336T1E120JD01# 0.6pF ±0.1pF GRM1535C1HR60BDD5# Part number # indicates the package specification code. 36 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.0×0.5mm) Tol. Part Number 0.7pF ±0.1pF GRM1535C1HR70BDD5# 6.1pF ±0.5pF GRM1535C1H6R1DDD5# 0.8pF ±0.1pF GRM1535C1HR80BDD5# 6.2pF ±0.5pF GRM1535C1H6R2DDD5# 0.9pF ±0.1pF GRM1535C1HR90BDD5# 6.3pF ±0.5pF GRM1535C1H6R3DDD5# 1.0pF ±0.25pF GRM1535C1H1R0CDD5# 6.4pF ±0.5pF GRM1535C1H6R4DDD5# 1.1pF ±0.25pF GRM1535C1H1R1CDD5# 6.5pF ±0.5pF GRM1535C1H6R5DDD5# 1.2pF ±0.25pF GRM1535C1H1R2CDD5# 6.6pF ±0.5pF GRM1535C1H6R6DDD5# 1.3pF ±0.25pF GRM1535C1H1R3CDD5# 6.7pF ±0.5pF GRM1535C1H6R7DDD5# 1.4pF ±0.25pF GRM1535C1H1R4CDD5# 6.8pF ±0.5pF GRM1535C1H6R8DDD5# 1.5pF ±0.25pF GRM1535C1H1R5CDD5# 6.9pF ±0.5pF GRM1535C1H6R9DDD5# 1.6pF ±0.25pF GRM1535C1H1R6CDD5# 7.0pF ±0.5pF GRM1535C1H7R0DDD5# 1.7pF ±0.25pF GRM1535C1H1R7CDD5# 7.1pF ±0.5pF GRM1535C1H7R1DDD5# 1.8pF ±0.25pF GRM1535C1H1R8CDD5# 7.2pF ±0.5pF GRM1535C1H7R2DDD5# 1.9pF ±0.25pF GRM1535C1H1R9CDD5# 7.3pF ±0.5pF GRM1535C1H7R3DDD5# 2.0pF ±0.25pF GRM1535C1H2R0CDD5# 7.4pF ±0.5pF GRM1535C1H7R4DDD5# 2.1pF ±0.25pF GRM1535C1H2R1CDD5# 7.5pF ±0.5pF GRM1535C1H7R5DDD5# 2.2pF ±0.25pF GRM1535C1H2R2CDD5# 7.6pF ±0.5pF GRM1535C1H7R6DDD5# 2.3pF ±0.25pF GRM1535C1H2R3CDD5# 7.7pF ±0.5pF GRM1535C1H7R7DDD5# 2.4pF ±0.25pF GRM1535C1H2R4CDD5# 7.8pF ±0.5pF GRM1535C1H7R8DDD5# 2.5pF ±0.25pF GRM1535C1H2R5CDD5# 7.9pF ±0.5pF GRM1535C1H7R9DDD5# 2.6pF ±0.25pF GRM1535C1H2R6CDD5# 8.0pF ±0.5pF GRM1535C1H8R0DDD5# 2.7pF ±0.25pF GRM1535C1H2R7CDD5# 8.1pF ±0.5pF GRM1535C1H8R1DDD5# 2.8pF ±0.25pF GRM1535C1H2R8CDD5# 8.2pF ±0.5pF GRM1535C1H8R2DDD5# 2.9pF ±0.25pF GRM1535C1H2R9CDD5# 8.3pF ±0.5pF GRM1535C1H8R3DDD5# 3.0pF ±0.25pF GRM1535C1H3R0CDD5# 8.4pF ±0.5pF GRM1535C1H8R4DDD5# 3.1pF ±0.25pF GRM1535C1H3R1CDD5# 8.5pF ±0.5pF GRM1535C1H8R5DDD5# 3.2pF ±0.25pF GRM1535C1H3R2CDD5# 8.6pF ±0.5pF GRM1535C1H8R6DDD5# 3.3pF ±0.25pF GRM1535C1H3R3CDD5# 8.7pF ±0.5pF GRM1535C1H8R7DDD5# 3.4pF ±0.25pF GRM1535C1H3R4CDD5# 8.8pF ±0.5pF GRM1535C1H8R8DDD5# 3.5pF ±0.25pF GRM1535C1H3R5CDD5# 8.9pF ±0.5pF GRM1535C1H8R9DDD5# 3.6pF ±0.25pF GRM1535C1H3R6CDD5# 9.0pF ±0.5pF GRM1535C1H9R0DDD5# 3.7pF ±0.25pF GRM1535C1H3R7CDD5# 9.1pF ±0.5pF GRM1535C1H9R1DDD5# 3.8pF ±0.25pF GRM1535C1H3R8CDD5# 9.2pF ±0.5pF GRM1535C1H9R2DDD5# 3.9pF ±0.25pF GRM1535C1H3R9CDD5# 9.3pF ±0.5pF GRM1535C1H9R3DDD5# 4.0pF ±0.25pF GRM1535C1H4R0CDD5# 9.4pF ±0.5pF GRM1535C1H9R4DDD5# 4.1pF ±0.25pF GRM1535C1H4R1CDD5# 9.5pF ±0.5pF GRM1535C1H9R5DDD5# 4.2pF ±0.25pF GRM1535C1H4R2CDD5# 9.6pF ±0.5pF GRM1535C1H9R6DDD5# 4.3pF ±0.25pF GRM1535C1H4R3CDD5# 9.7pF ±0.5pF GRM1535C1H9R7DDD5# 4.4pF ±0.25pF GRM1535C1H4R4CDD5# 9.8pF ±0.5pF GRM1535C1H9R8DDD5# 4.5pF ±0.25pF GRM1535C1H4R5CDD5# 9.9pF ±0.5pF GRM1535C1H9R9DDD5# 4.6pF ±0.25pF GRM1535C1H4R6CDD5# 10pF ±5% GRM1535C1H100JDD5# 4.7pF ±0.25pF GRM1535C1H4R7CDD5# 12pF ±5% GRM1535C1H120JDD5# 4.8pF ±0.25pF GRM1535C1H4R8CDD5# 15pF ±5% GRM1535C1H150JDD5# 4.9pF ±0.25pF GRM1535C1H4R9CDD5# 18pF ±5% GRM1535C1H180JDD5# 5.0pF ±0.25pF GRM1535C1H5R0CDD5# 22pF ±5% GRM1535C1H220JDD5# 5.1pF ±0.5pF GRM1535C1H5R1DDD5# 27pF ±5% GRM1535C1H270JDD5# 5.2pF ±0.5pF GRM1535C1H5R2DDD5# 33pF ±5% GRM1535C1H330JDD5# 5.3pF ±0.5pF GRM1535C1H5R3DDD5# 39pF ±5% GRM1535C1H390JDD5# 5.4pF ±0.5pF GRM1535C1H5R4DDD5# 47pF ±5% GRM1535C1H470JDD5# 5.5pF ±0.5pF GRM1535C1H5R5DDD5# 56pF ±5% GRM1535C1H560JDD5# 5.6pF ±0.5pF GRM1535C1H5R6DDD5# 68pF ±5% GRM1535C1H680JDD5# 5.7pF ±0.5pF GRM1535C1H5R7DDD5# 82pF ±5% GRM1535C1H820JDD5# 5.8pF ±0.5pF GRM1535C1H5R8DDD5# 100pF ±5% GRM1535C1H101JDD5# 5.9pF ±0.5pF GRM1535C1H5R9DDD5# 120pF ±5% GRM1535C1H121JDD5# 6.0pF ±0.5pF GRM1535C1H6R0DDD5# 150pF ±5% GRM1535C1H151JDD5# 0.33mm 50Vdc C0G For General Purpose GRM Series Cap. Capacitor Array GNM Series Rated TC Voltage Code Low ESL LLp Series T max. High-Q Type GJM Series Part Number High Frequency GQM Series C0G Tol. Monolithic Microchip GMA Series 0.33mm 50Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. Part number # indicates the package specification code. 37 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.0×0.5mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.33mm 50Vdc C0G Capacitor Array GNM Series CK Low ESL LLp Series High-Q Type GJM Series High Frequency GQM Series CJ Monolithic Microchip GMA Series For Bonding GMD Series CH Part Number T max. Rated TC Voltage Code Cap. Tol. 180pF ±5% GRM1535C1H181JDD5# 4.7pF ±0.25pF GRM1532C1H4R7CDD5# 220pF ±5% GRM1535C1H221JDD5# 4.8pF ±0.25pF GRM1532C1H4R8CDD5# 270pF ±5% GRM1535C1H271JDD5# 4.9pF ±0.25pF GRM1532C1H4R9CDD5# 330pF ±5% GRM1535C1H331JDD5# 5.0pF ±0.25pF GRM1532C1H5R0CDD5# 390pF ±5% GRM1535C1H391JDD5# 5.1pF ±0.5pF GRM1532C1H5R1DDD5# 470pF ±5% GRM1535C1H471JDD5# 5.2pF ±0.5pF GRM1532C1H5R2DDD5# 560pF ±5% GRM1535C1H561JDD5# 5.3pF ±0.5pF GRM1532C1H5R3DDD5# 680pF ±5% GRM1535C1H681JDD5# 5.4pF ±0.5pF GRM1532C1H5R4DDD5# 0.33mm 50Vdc CH Cap. Tol. Part Number Product Information 0.1pF ±0.1pF GRM1534C1HR10BDD5# 5.5pF ±0.5pF GRM1532C1H5R5DDD5# 0.2pF ±0.1pF GRM1534C1HR20BDD5# 5.6pF ±0.5pF GRM1532C1H5R6DDD5# 0.3pF ±0.1pF GRM1534C1HR30BDD5# 5.7pF ±0.5pF GRM1532C1H5R7DDD5# 0.4pF ±0.1pF GRM1534C1HR40BDD5# 5.8pF ±0.5pF GRM1532C1H5R8DDD5# 0.5pF ±0.1pF GRM1534C1HR50BDD5# 5.9pF ±0.5pF GRM1532C1H5R9DDD5# 0.6pF ±0.1pF GRM1534C1HR60BDD5# 6.0pF ±0.5pF GRM1532C1H6R0DDD5# 0.7pF ±0.1pF GRM1534C1HR70BDD5# 6.1pF ±0.5pF GRM1532C1H6R1DDD5# 0.8pF ±0.1pF GRM1534C1HR80BDD5# 6.2pF ±0.5pF GRM1532C1H6R2DDD5# 0.9pF ±0.1pF GRM1534C1HR90BDD5# 6.3pF ±0.5pF GRM1532C1H6R3DDD5# 1.0pF ±0.25pF GRM1534C1H1R0CDD5# 6.4pF ±0.5pF GRM1532C1H6R4DDD5# 1.1pF ±0.25pF GRM1534C1H1R1CDD5# 6.5pF ±0.5pF GRM1532C1H6R5DDD5# 1.2pF ±0.25pF GRM1534C1H1R2CDD5# 6.6pF ±0.5pF GRM1532C1H6R6DDD5# 1.3pF ±0.25pF GRM1534C1H1R3CDD5# 6.7pF ±0.5pF GRM1532C1H6R7DDD5# 1.4pF ±0.25pF GRM1534C1H1R4CDD5# 6.8pF ±0.5pF GRM1532C1H6R8DDD5# 1.5pF ±0.25pF GRM1534C1H1R5CDD5# 6.9pF ±0.5pF GRM1532C1H6R9DDD5# 1.6pF ±0.25pF GRM1534C1H1R6CDD5# 7.0pF ±0.5pF GRM1532C1H7R0DDD5# 1.7pF ±0.25pF GRM1534C1H1R7CDD5# 7.1pF ±0.5pF GRM1532C1H7R1DDD5# 1.8pF ±0.25pF GRM1534C1H1R8CDD5# 7.2pF ±0.5pF GRM1532C1H7R2DDD5# 1.9pF ±0.25pF GRM1534C1H1R9CDD5# 7.3pF ±0.5pF GRM1532C1H7R3DDD5# 2.0pF ±0.25pF GRM1534C1H2R0CDD5# 7.4pF ±0.5pF GRM1532C1H7R4DDD5# 2.1pF ±0.25pF GRM1533C1H2R1CDD5# 7.5pF ±0.5pF GRM1532C1H7R5DDD5# 2.2pF ±0.25pF GRM1533C1H2R2CDD5# 7.6pF ±0.5pF GRM1532C1H7R6DDD5# 2.3pF ±0.25pF GRM1533C1H2R3CDD5# 7.7pF ±0.5pF GRM1532C1H7R7DDD5# 2.4pF ±0.25pF GRM1533C1H2R4CDD5# 7.8pF ±0.5pF GRM1532C1H7R8DDD5# 2.5pF ±0.25pF GRM1533C1H2R5CDD5# 7.9pF ±0.5pF GRM1532C1H7R9DDD5# 2.6pF ±0.25pF GRM1533C1H2R6CDD5# 8.0pF ±0.5pF GRM1532C1H8R0DDD5# 2.7pF ±0.25pF GRM1533C1H2R7CDD5# 8.1pF ±0.5pF GRM1532C1H8R1DDD5# 2.8pF ±0.25pF GRM1533C1H2R8CDD5# 8.2pF ±0.5pF GRM1532C1H8R2DDD5# 2.9pF ±0.25pF GRM1533C1H2R9CDD5# 8.3pF ±0.5pF GRM1532C1H8R3DDD5# 3.0pF ±0.25pF GRM1533C1H3R0CDD5# 8.4pF ±0.5pF GRM1532C1H8R4DDD5# 3.1pF ±0.25pF GRM1533C1H3R1CDD5# 8.5pF ±0.5pF GRM1532C1H8R5DDD5# 3.2pF ±0.25pF GRM1533C1H3R2CDD5# 8.6pF ±0.5pF GRM1532C1H8R6DDD5# 3.3pF ±0.25pF GRM1533C1H3R3CDD5# 8.7pF ±0.5pF GRM1532C1H8R7DDD5# 3.4pF ±0.25pF GRM1533C1H3R4CDD5# 8.8pF ±0.5pF GRM1532C1H8R8DDD5# 3.5pF ±0.25pF GRM1533C1H3R5CDD5# 8.9pF ±0.5pF GRM1532C1H8R9DDD5# 3.6pF ±0.25pF GRM1533C1H3R6CDD5# 9.0pF ±0.5pF GRM1532C1H9R0DDD5# 3.7pF ±0.25pF GRM1533C1H3R7CDD5# 9.1pF ±0.5pF GRM1532C1H9R1DDD5# 3.8pF ±0.25pF GRM1533C1H3R8CDD5# 9.2pF ±0.5pF GRM1532C1H9R2DDD5# 3.9pF ±0.25pF GRM1533C1H3R9CDD5# 9.3pF ±0.5pF GRM1532C1H9R3DDD5# 4.0pF ±0.25pF GRM1532C1H4R0CDD5# 9.4pF ±0.5pF GRM1532C1H9R4DDD5# 4.1pF ±0.25pF GRM1532C1H4R1CDD5# 9.5pF ±0.5pF GRM1532C1H9R5DDD5# 4.2pF ±0.25pF GRM1532C1H4R2CDD5# 9.6pF ±0.5pF GRM1532C1H9R6DDD5# 4.3pF ±0.25pF GRM1532C1H4R3CDD5# 9.7pF ±0.5pF GRM1532C1H9R7DDD5# 4.4pF ±0.25pF GRM1532C1H4R4CDD5# 9.8pF ±0.5pF GRM1532C1H9R8DDD5# 4.5pF ±0.25pF GRM1532C1H4R5CDD5# 9.9pF ±0.5pF GRM1532C1H9R9DDD5# 4.6pF ±0.25pF GRM1532C1H4R6CDD5# 10pF ±5% GRM1532C1H100JDD5# Part number # indicates the package specification code. 38 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.0×0.5mm) ±5% GRM1532C1H120JDD5# 15pF ±5% GRM1532C1H150JDD5# 18pF ±5% GRM1532C1H180JDD5# ±0.1pF GRM1555C1H1R5BA01# 22pF ±5% GRM1532C1H220JDD5# ±0.25pF GRM1555C1H1R5CA01# 27pF ±5% GRM1532C1H270JDD5# 33pF ±5% GRM1532C1H330JDD5# ±0.1pF GRM1555C1H1R6BA01# 39pF ±5% GRM1532C1H390JDD5# ±0.25pF GRM1555C1H1R6CA01# 47pF ±5% GRM1532C1H470JDD5# 56pF ±5% GRM1532C1H560JDD5# ±0.1pF GRM1555C1H1R7BA01# 68pF ±5% GRM1532C1H680JDD5# ±0.25pF GRM1555C1H1R7CA01# 1.4pF ±0.25pF GRM1555C1H1R4CA01# 1.5pF ±0.05pF GRM1555C1H1R5WA01# ±0.05pF GRM1555C1H1R7WA01# 82pF ±5% GRM1532C1H820JDD5# ±5% GRM1532C1H101JDD5# ±0.1pF GRM1555C1H1R8BA01# 120pF ±5% GRM1532C1H121JDD5# ±0.25pF GRM1555C1H1R8CA01# 150pF ±5% GRM1532C1H151JDD5# 180pF ±5% GRM1532C1H181JDD5# ±0.1pF GRM1555C1H1R9BA01# 220pF ±5% GRM1532C1H221JDD5# ±0.25pF GRM1555C1H1R9CA01# 270pF ±5% GRM1532C1H271JDD5# 330pF ±5% GRM1532C1H331JDD5# ±0.1pF GRM1555C1H2R0BA01# 390pF ±5% GRM1532C1H391JDD5# ±0.25pF GRM1555C1H2R0CA01# 470pF ±5% GRM1532C1H471JDD5# 560pF ±5% GRM1532C1H561JDD5# ±5% GRM1532C1H681JDD5# 1.8pF 1.9pF 2.0pF 2.1pF ±0.05pF GRM1555C1H1R8WA01# ±0.05pF GRM1555C1H1R9WA01# ±0.05pF GRM1555C1H2R0WA01# ±0.05pF GRM1555C1H2R1WA01# ±0.1pF GRM1555C1H2R1BA01# ±0.25pF GRM1555C1H2R1CA01# 0.1pF ±0.05pF GRM1555C1HR10WA01# ±0.1pF GRM1555C1HR10BA01# ±0.1pF GRM1555C1H2R2BA01# 0.2pF ±0.05pF GRM1555C1HR20WA01# ±0.25pF GRM1555C1H2R2CA01# ±0.1pF GRM1555C1HR20BA01# 0.3pF 0.4pF 2.2pF 2.3pF ±0.05pF GRM1555C1H2R2WA01# ±0.05pF GRM1555C1H2R3WA01# ±0.05pF GRM1555C1HR30WA01# ±0.1pF GRM1555C1H2R3BA01# ±0.1pF GRM1555C1HR30BA01# ±0.25pF GRM1555C1H2R3CA01# ±0.05pF GRM1555C1HR40WA01# 2.4pF ±0.05pF GRM1555C1H2R4WA01# ±0.1pF GRM1555C1HR40BA01# ±0.1pF GRM1555C1H2R4BA01# 0.5pF ±0.05pF GRM1555C1HR50WA01# ±0.25pF GRM1555C1H2R4CA01# 0.6pF ±0.05pF GRM1555C1HR60WA01# ±0.1pF GRM1555C1H2R5BA01# ±0.1pF GRM1555C1HR60BA01# ±0.25pF GRM1555C1H2R5CA01# ±0.1pF GRM1555C1HR50BA01# 0.7pF ±0.05pF GRM1555C1HR70WA01# 2.5pF 2.6pF ±0.05pF GRM1555C1H2R5WA01# ±0.05pF GRM1555C1H2R6WA01# ±0.1pF GRM1555C1HR70BA01# ±0.1pF GRM1555C1H2R6BA01# 0.8pF ±0.05pF GRM1555C1HR80WA01# ±0.25pF GRM1555C1H2R6CA01# 0.9pF ±0.05pF GRM1555C1HR90WA01# ±0.1pF GRM1555C1H2R7BA01# ±0.1pF GRM1555C1HR90BA01# ±0.25pF GRM1555C1H2R7CA01# ±0.1pF GRM1555C1HR80BA01# 1.0pF ±0.05pF GRM1555C1H1R0WA01# 2.7pF 2.8pF ±0.1pF GRM1555C1H1R0BA01# 1.2pF 1.3pF 1.4pF ±0.05pF GRM1555C1H1R1WA01# ±0.05pF GRM1555C1H2R7WA01# ±0.05pF GRM1555C1H2R8WA01# ±0.1pF GRM1555C1H2R8BA01# ±0.25pF GRM1555C1H1R0CA01# 1.1pF ±0.25pF GRM1555C1H2R8CA01# 2.9pF ±0.05pF GRM1555C1H2R9WA01# ±0.1pF GRM1555C1H1R1BA01# ±0.1pF GRM1555C1H2R9BA01# ±0.25pF GRM1555C1H1R1CA01# ±0.25pF GRM1555C1H2R9CA01# ±0.05pF GRM1555C1H1R2WA01# 3.0pF ±0.05pF GRM1555C1H3R0WA01# ±0.1pF GRM1555C1H1R2BA01# ±0.1pF GRM1555C1H3R0BA01# ±0.25pF GRM1555C1H1R2CA01# ±0.25pF GRM1555C1H3R0CA01# ±0.05pF GRM1555C1H1R3WA01# 3.1pF ±0.05pF GRM1555C1H3R1WA01# ±0.1pF GRM1555C1H1R3BA01# ±0.1pF GRM1555C1H3R1BA01# ±0.25pF GRM1555C1H1R3CA01# ±0.25pF GRM1555C1H3R1CA01# ±0.05pF GRM1555C1H1R4WA01# ±0.1pF GRM1555C1H1R4BA01# Capacitor Array GNM Series 1.7pF ±0.05pF GRM1555C1H1R6WA01# Low ESL LLp Series 1.6pF High-Q Type GJM Series C0G Part Number 100pF 680pF 0.55mm 50Vdc C0G Tol. For General Purpose GRM Series 12pF 0.55mm 50Vdc Cap. High Frequency GQM Series CH Rated TC Voltage Code Tol. Monolithic Microchip GMA Series 0.33mm 50Vdc Part Number T max. Cap. 3.2pF For Bonding GMD Series Rated TC Voltage Code Product Information T max. ±0.05pF GRM1555C1H3R2WA01# ±0.1pF GRM1555C1H3R2BA01# Part number # indicates the package specification code. 39 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.0×0.5mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.55mm 50Vdc C0G Cap. Tol. Part Number 3.2pF ±0.25pF GRM1555C1H3R2CA01# 3.3pF ±0.05pF GRM1555C1H3R3WA01# 3.4pF Rated TC Voltage Code 0.55mm 50Vdc C0G Cap. 5.0pF ±0.25pF GRM1555C1H5R0CA01# 5.1pF ±0.05pF GRM1555C1H5R1WA01# ±0.1pF GRM1555C1H5R1BA01# ±0.25pF GRM1555C1H5R1CA01# ±0.05pF GRM1555C1H3R4WA01# ±0.5pF GRM1555C1H5R1DA01# 5.2pF ±0.1pF GRM1555C1H5R2BA01# ±0.05pF GRM1555C1H3R5WA01# ±0.25pF GRM1555C1H5R2CA01# Capacitor Array GNM Series ±0.5pF GRM1555C1H5R2DA01# 5.3pF ±0.1pF GRM1555C1H5R3BA01# ±0.1pF GRM1555C1H3R6BA01# ±0.25pF GRM1555C1H5R3CA01# ±0.05pF GRM1555C1H3R7WA01# Low ESL LLp Series ±0.1pF GRM1555C1H5R4BA01# ±0.25pF GRM1555C1H5R4CA01# ±0.05pF GRM1555C1H3R8WA01# ±0.5pF GRM1555C1H5R4DA01# 5.5pF High-Q Type GJM Series High Frequency GQM Series 4.2pF ±0.25pF GRM1555C1H3R8CA01# ±0.1pF GRM1555C1H5R5BA01# ±0.25pF GRM1555C1H5R5CA01# ±0.1pF GRM1555C1H3R9BA01# ±0.5pF GRM1555C1H5R5DA01# 5.6pF ±0.1pF GRM1555C1H5R6BA01# ±0.1pF GRM1555C1H4R0BA01# ±0.25pF GRM1555C1H5R6CA01# ±0.05pF GRM1555C1H4R1WA01# ±0.5pF GRM1555C1H5R6DA01# 5.7pF ±0.1pF GRM1555C1H4R1BA01# ±0.1pF GRM1555C1H5R7BA01# ±0.25pF GRM1555C1H5R7CA01# ±0.05pF GRM1555C1H4R2WA01# ±0.5pF GRM1555C1H5R7DA01# 5.8pF Monolithic Microchip GMA Series 4.6pF ±0.1pF GRM1555C1H5R8BA01# ±0.05pF GRM1555C1H4R3WA01# ±0.25pF GRM1555C1H5R8CA01# ±0.5pF GRM1555C1H5R8DA01# 5.9pF ±0.1pF GRM1555C1H5R9BA01# ±0.1pF GRM1555C1H4R4BA01# ±0.25pF GRM1555C1H5R9CA01# ±0.25pF GRM1555C1H4R4CA01# ±0.5pF GRM1555C1H5R9DA01# ±0.05pF GRM1555C1H4R5WA01# 6.0pF ±0.1pF GRM1555C1H6R0BA01# ±0.25pF GRM1555C1H4R5CA01# ±0.25pF GRM1555C1H6R0CA01# ±0.05pF GRM1555C1H4R6WA01# ±0.5pF GRM1555C1H6R0DA01# 6.1pF For Bonding GMD Series ±0.25pF GRM1555C1H4R6CA01# ±0.1pF GRM1555C1H6R1BA01# ±0.25pF GRM1555C1H6R1CA01# ±0.5pF GRM1555C1H6R1DA01# 6.2pF ±0.05pF GRM1555C1H6R2WA01# ±0.05pF GRM1555C1H4R8WA01# ±0.1pF GRM1555C1H6R2BA01# ±0.1pF GRM1555C1H4R8BA01# ±0.25pF GRM1555C1H6R2CA01# Product Information ±0.25pF GRM1555C1H4R8CA01# 5.0pF ±0.05pF GRM1555C1H6R1WA01# ±0.05pF GRM1555C1H4R7WA01# ±0.1pF GRM1555C1H4R7BA01# 4.9pF ±0.05pF GRM1555C1H6R0WA01# ±0.1pF GRM1555C1H4R5BA01# ±0.25pF GRM1555C1H4R7CA01# 4.8pF ±0.05pF GRM1555C1H5R9WA01# ±0.05pF GRM1555C1H4R4WA01# ±0.1pF GRM1555C1H4R6BA01# 4.7pF ±0.05pF GRM1555C1H5R8WA01# ±0.25pF GRM1555C1H4R2CA01# ±0.25pF GRM1555C1H4R3CA01# 4.5pF ±0.05pF GRM1555C1H5R7WA01# ±0.25pF GRM1555C1H4R1CA01# ±0.1pF GRM1555C1H4R3BA01# 4.4pF ±0.05pF GRM1555C1H5R6WA01# ±0.05pF GRM1555C1H4R0WA01# ±0.1pF GRM1555C1H4R2BA01# 4.3pF ±0.05pF GRM1555C1H5R5WA01# ±0.05pF GRM1555C1H3R9WA01# ±0.25pF GRM1555C1H4R0CA01# 4.1pF ±0.05pF GRM1555C1H5R4WA01# ±0.25pF GRM1555C1H3R7CA01# ±0.25pF GRM1555C1H3R9CA01# 4.0pF ±0.5pF GRM1555C1H5R3DA01# 5.4pF ±0.1pF GRM1555C1H3R7BA01# ±0.1pF GRM1555C1H3R8BA01# 3.9pF ±0.05pF GRM1555C1H5R3WA01# ±0.05pF GRM1555C1H3R6WA01# ±0.25pF GRM1555C1H3R6CA01# 3.8pF ±0.05pF GRM1555C1H5R2WA01# ±0.25pF GRM1555C1H3R4CA01# ±0.1pF GRM1555C1H3R5BA01# 3.7pF Part Number ±0.25pF GRM1555C1H3R3CA01# ±0.25pF GRM1555C1H3R5CA01# 3.6pF Tol. ±0.1pF GRM1555C1H3R3BA01# ±0.1pF GRM1555C1H3R4BA01# 3.5pF T max. ±0.05pF GRM1555C1H4R9WA01# ±0.5pF GRM1555C1H6R2DA01# 6.3pF ±0.05pF GRM1555C1H6R3WA01# ±0.1pF GRM1555C1H4R9BA01# ±0.1pF GRM1555C1H6R3BA01# ±0.25pF GRM1555C1H4R9CA01# ±0.25pF GRM1555C1H6R3CA01# ±0.05pF GRM1555C1H5R0WA01# ±0.5pF GRM1555C1H6R3DA01# ±0.1pF GRM1555C1H5R0BA01# 6.4pF ±0.05pF GRM1555C1H6R4WA01# Part number # indicates the package specification code. 40 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.0×0.5mm) 7.7pF ±0.5pF GRM1555C1H7R7DA01# 7.8pF ±0.05pF GRM1555C1H7R8WA01# ±0.5pF GRM1555C1H6R4DA01# ±0.1pF GRM1555C1H7R8BA01# ±0.25pF GRM1555C1H7R8CA01# ±0.1pF GRM1555C1H6R5BA01# ±0.5pF GRM1555C1H7R8DA01# 7.9pF ±0.1pF GRM1555C1H7R9BA01# ±0.05pF GRM1555C1H6R6WA01# ±0.25pF GRM1555C1H7R9CA01# ±0.1pF GRM1555C1H6R6BA01# ±0.5pF GRM1555C1H7R9DA01# 8.0pF ±0.5pF GRM1555C1H6R6DA01# ±0.1pF GRM1555C1H8R0BA01# ±0.25pF GRM1555C1H8R0CA01# ±0.1pF GRM1555C1H6R7BA01# ±0.5pF GRM1555C1H8R0DA01# 8.1pF ±0.1pF GRM1555C1H8R1BA01# ±0.05pF GRM1555C1H6R8WA01# ±0.25pF GRM1555C1H8R1CA01# ±0.1pF GRM1555C1H6R8BA01# ±0.5pF GRM1555C1H8R1DA01# 8.2pF ±0.5pF GRM1555C1H6R8DA01# ±0.1pF GRM1555C1H8R2BA01# ±0.25pF GRM1555C1H8R2CA01# ±0.1pF GRM1555C1H6R9BA01# ±0.5pF GRM1555C1H8R2DA01# 8.3pF ±0.1pF GRM1555C1H8R3BA01# ±0.05pF GRM1555C1H7R0WA01# ±0.25pF GRM1555C1H8R3CA01# ±0.1pF GRM1555C1H7R0BA01# ±0.5pF GRM1555C1H8R3DA01# 8.4pF ±0.5pF GRM1555C1H7R0DA01# ±0.1pF GRM1555C1H8R4BA01# ±0.25pF GRM1555C1H8R4CA01# ±0.1pF GRM1555C1H7R1BA01# ±0.5pF GRM1555C1H8R4DA01# 8.5pF ±0.1pF GRM1555C1H8R5BA01# ±0.05pF GRM1555C1H7R2WA01# ±0.25pF GRM1555C1H8R5CA01# ±0.25pF GRM1555C1H7R2CA01# ±0.5pF GRM1555C1H8R5DA01# 8.6pF ±0.5pF GRM1555C1H7R2DA01# ±0.1pF GRM1555C1H8R6BA01# ±0.25pF GRM1555C1H8R6CA01# ±0.1pF GRM1555C1H7R3BA01# ±0.5pF GRM1555C1H8R6DA01# 8.7pF ±0.1pF GRM1555C1H8R7BA01# ±0.05pF GRM1555C1H7R4WA01# ±0.25pF GRM1555C1H8R7CA01# ±0.1pF GRM1555C1H7R4BA01# ±0.5pF GRM1555C1H8R7DA01# 8.8pF ±0.5pF GRM1555C1H7R4DA01# ±0.1pF GRM1555C1H8R8BA01# ±0.25pF GRM1555C1H8R8CA01# ±0.1pF GRM1555C1H7R5BA01# ±0.5pF GRM1555C1H8R8DA01# 8.9pF ±0.05pF GRM1555C1H8R9WA01# ±0.5pF GRM1555C1H7R5DA01# ±0.1pF GRM1555C1H8R9BA01# ±0.05pF GRM1555C1H7R6WA01# ±0.25pF GRM1555C1H8R9CA01# ±0.1pF GRM1555C1H7R6BA01# ±0.25pF GRM1555C1H7R6CA01# 7.7pF ±0.05pF GRM1555C1H8R8WA01# ±0.05pF GRM1555C1H7R5WA01# ±0.25pF GRM1555C1H7R5CA01# 7.6pF ±0.05pF GRM1555C1H8R7WA01# ±0.5pF GRM1555C1H7R3DA01# ±0.25pF GRM1555C1H7R4CA01# 7.5pF ±0.05pF GRM1555C1H8R6WA01# ±0.05pF GRM1555C1H7R3WA01# ±0.25pF GRM1555C1H7R3CA01# 7.4pF ±0.05pF GRM1555C1H8R5WA01# ±0.5pF GRM1555C1H7R1DA01# ±0.1pF GRM1555C1H7R2BA01# 7.3pF ±0.05pF GRM1555C1H8R4WA01# ±0.05pF GRM1555C1H7R1WA01# ±0.25pF GRM1555C1H7R1CA01# 7.2pF ±0.05pF GRM1555C1H8R3WA01# ±0.5pF GRM1555C1H6R9DA01# ±0.25pF GRM1555C1H7R0CA01# 7.1pF ±0.05pF GRM1555C1H8R2WA01# ±0.05pF GRM1555C1H6R9WA01# ±0.25pF GRM1555C1H6R9CA01# 7.0pF ±0.05pF GRM1555C1H8R1WA01# ±0.5pF GRM1555C1H6R7DA01# ±0.25pF GRM1555C1H6R8CA01# 6.9pF ±0.05pF GRM1555C1H8R0WA01# ±0.05pF GRM1555C1H6R7WA01# ±0.25pF GRM1555C1H6R7CA01# 6.8pF ±0.05pF GRM1555C1H7R9WA01# ±0.5pF GRM1555C1H6R5DA01# ±0.25pF GRM1555C1H6R6CA01# 6.7pF Part Number ±0.5pF GRM1555C1H8R9DA01# 9.0pF ±0.05pF GRM1555C1H9R0WA01# ±0.5pF GRM1555C1H7R6DA01# ±0.1pF GRM1555C1H9R0BA01# ±0.05pF GRM1555C1H7R7WA01# ±0.25pF GRM1555C1H9R0CA01# ±0.1pF GRM1555C1H7R7BA01# ±0.5pF GRM1555C1H9R0DA01# ±0.25pF GRM1555C1H7R7CA01# For General Purpose GRM Series C0G Tol. ±0.05pF GRM1555C1H6R5WA01# ±0.25pF GRM1555C1H6R5CA01# 6.6pF 0.55mm 50Vdc Cap. Capacitor Array GNM Series 6.5pF Rated TC Voltage Code Low ESL LLp Series ±0.1pF GRM1555C1H6R4BA01# ±0.25pF GRM1555C1H6R4CA01# T max. High-Q Type GJM Series 6.4pF Part Number High Frequency GQM Series C0G Tol. Monolithic Microchip GMA Series 0.55mm 50Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. 9.1pF ±0.05pF GRM1555C1H9R1WA01# Part number # indicates the package specification code. 41 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.0×0.5mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.55mm 50Vdc C0G Cap. 9.1pF Tol. Part Number ±0.1pF GRM1555C1H9R1BA01# T max. Rated TC Voltage Code 0.55mm 50Vdc C0G ±0.25pF GRM1555C1H9R1CA01# Cap. Tol. 56pF ±5% GRM1555C1H560JA01# 68pF ±2% GRM1555C1H680GA01# ±5% GRM1555C1H680JA01# ±2% GRM1555C1H820GA01# ±5% GRM1555C1H820JA01# ±2% GRM1555C1H101GA01# ±5% GRM1555C1H101JA01# ±2% GRM1555C1H121GA01# ±5% GRM1555C1H121JA01# 150pF ±2% GRM1555C1H151GA01# ±5% GRM1555C1H151JA01# 180pF ±2% GRM1555C1H181GA01# ±5% GRM1555C1H181JA01# ±2% GRM1555C1H221GA01# ±5% GRM1555C1H221JA01# 270pF ±2% GRM1555C1H271GA01# ±5% GRM1555C1H271JA01# 330pF ±2% GRM1555C1H331GA01# ±5% GRM1555C1H331JA01# ±2% GRM1555C1H391GA01# ±5% GRM1555C1H391JA01# ±2% GRM1555C1H471GA01# ±5% GRM1555C1H471JA01# ±2% GRM1555C1H561GA01# ±5% GRM1555C1H561JA01# 680pF ±2% GRM1555C1H681GA01# ±5% GRM1555C1H681JA01# 820pF ±2% GRM1555C1H821GA01# ±5% GRM1555C1H821JA01# ±2% GRM1555C1H102GA01# ±5% GRM1555C1H102JA01# ±0.5pF GRM1555C1H9R1DA01# 9.2pF ±0.05pF GRM1555C1H9R2WA01# 82pF ±0.1pF GRM1555C1H9R2BA01# ±0.25pF GRM1555C1H9R2CA01# 100pF ±0.5pF GRM1555C1H9R2DA01# 9.3pF ±0.05pF GRM1555C1H9R3WA01# 120pF Capacitor Array GNM Series ±0.1pF GRM1555C1H9R3BA01# ±0.25pF GRM1555C1H9R3CA01# ±0.5pF GRM1555C1H9R3DA01# 9.4pF ±0.05pF GRM1555C1H9R4WA01# ±0.1pF GRM1555C1H9R4BA01# ±0.25pF GRM1555C1H9R4CA01# 220pF ±0.5pF GRM1555C1H9R4DA01# Low ESL LLp Series 9.5pF ±0.05pF GRM1555C1H9R5WA01# ±0.1pF GRM1555C1H9R5BA01# ±0.25pF GRM1555C1H9R5CA01# ±0.5pF GRM1555C1H9R5DA01# 9.6pF ±0.05pF GRM1555C1H9R6WA01# 390pF ±0.1pF GRM1555C1H9R6BA01# ±0.25pF GRM1555C1H9R6CA01# 470pF High-Q Type GJM Series ±0.5pF GRM1555C1H9R6DA01# 9.7pF ±0.05pF GRM1555C1H9R7WA01# 560pF ±0.1pF GRM1555C1H9R7BA01# ±0.25pF GRM1555C1H9R7CA01# ±0.5pF GRM1555C1H9R7DA01# 9.8pF ±0.05pF GRM1555C1H9R8WA01# High Frequency GQM Series ±0.1pF GRM1555C1H9R8BA01# ±0.25pF GRM1555C1H9R8CA01# 1000pF ±0.5pF GRM1555C1H9R8DA01# 9.9pF ±0.05pF GRM1555C1H9R9WA01# CK 0.1pF ±0.05pF GRM1554C1HR10WA01# 0.2pF ±0.05pF GRM1554C1HR20WA01# 0.3pF ±0.05pF GRM1554C1HR30WA01# ±0.1pF GRM1555C1H9R9BA01# ±0.25pF GRM1555C1H9R9CA01# Part Number ±0.1pF GRM1554C1HR10BA01# Monolithic Microchip GMA Series ±0.5pF GRM1555C1H9R9DA01# ±0.1pF GRM1554C1HR20BA01# ±2% GRM1555C1H100GA01# ±5% GRM1555C1H100JA01# ±2% GRM1555C1H120GA01# ±5% GRM1555C1H120JA01# 15pF ±2% GRM1555C1H150GA01# ±5% GRM1555C1H150JA01# 18pF ±2% GRM1555C1H180GA01# ±5% GRM1555C1H180JA01# 22pF ±2% GRM1555C1H220GA01# ±5% GRM1555C1H220JA01# 27pF ±2% GRM1555C1H270GA01# ±5% GRM1555C1H270JA01# ±2% GRM1555C1H330GA01# ±5% GRM1555C1H330JA01# 39pF ±2% GRM1555C1H390GA01# ±5% GRM1555C1H390JA01# ±0.1pF GRM1554C1H1R0BA01# 47pF ±2% GRM1555C1H470GA01# ±0.25pF GRM1554C1H1R0CA01# ±5% GRM1555C1H470JA01# ±2% GRM1555C1H560GA01# 10pF 12pF For Bonding GMD Series 33pF Product Information 56pF ±0.1pF GRM1554C1HR30BA01# 0.4pF ±0.05pF GRM1554C1HR40WA01# 0.5pF ±0.05pF GRM1554C1HR50WA01# 0.6pF ±0.05pF GRM1554C1HR60WA01# 0.7pF ±0.05pF GRM1554C1HR70WA01# 0.8pF ±0.05pF GRM1554C1HR80WA01# ±0.1pF GRM1554C1HR40BA01# ±0.1pF GRM1554C1HR50BA01# ±0.1pF GRM1554C1HR60BA01# ±0.1pF GRM1554C1HR70BA01# ±0.1pF GRM1554C1HR80BA01# 0.9pF ±0.05pF GRM1554C1HR90WA01# 1.0pF ±0.05pF GRM1554C1H1R0WA01# ±0.1pF GRM1554C1HR90BA01# 1.1pF ±0.05pF GRM1554C1H1R1WA01# ±0.1pF GRM1554C1H1R1BA01# Part number # indicates the package specification code. 42 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.0×0.5mm) 1.3pF 1.4pF 1.5pF 1.6pF 1.7pF 1.8pF 0.55mm 50Vdc CJ ±0.25pF GRM1553C1H2R9CA01# 3.0pF ±0.05pF GRM1553C1H3R0WA01# ±0.1pF GRM1554C1H1R2BA01# ±0.1pF GRM1553C1H3R0BA01# ±0.25pF GRM1554C1H1R2CA01# ±0.25pF GRM1553C1H3R0CA01# ±0.05pF GRM1554C1H1R3WA01# 3.1pF CJ 2.1pF 2.2pF 2.3pF 2.4pF 2.5pF ±0.1pF GRM1554C1H1R3BA01# ±0.1pF GRM1553C1H3R1BA01# ±0.25pF GRM1553C1H3R1CA01# ±0.05pF GRM1554C1H1R4WA01# 3.2pF ±0.1pF GRM1553C1H3R2BA01# ±0.25pF GRM1554C1H1R4CA01# ±0.25pF GRM1553C1H3R2CA01# ±0.05pF GRM1554C1H1R5WA01# 3.3pF 2.8pF 2.9pF ±0.05pF GRM1553C1H3R3WA01# ±0.1pF GRM1554C1H1R5BA01# ±0.1pF GRM1553C1H3R3BA01# ±0.25pF GRM1554C1H1R5CA01# ±0.25pF GRM1553C1H3R3CA01# ±0.05pF GRM1554C1H1R6WA01# 3.4pF ±0.05pF GRM1553C1H3R4WA01# ±0.1pF GRM1554C1H1R6BA01# ±0.1pF GRM1553C1H3R4BA01# ±0.25pF GRM1554C1H1R6CA01# ±0.25pF GRM1553C1H3R4CA01# ±0.05pF GRM1554C1H1R7WA01# 3.5pF ±0.05pF GRM1553C1H3R5WA01# ±0.1pF GRM1554C1H1R7BA01# ±0.1pF GRM1553C1H3R5BA01# ±0.25pF GRM1554C1H1R7CA01# ±0.25pF GRM1553C1H3R5CA01# ±0.05pF GRM1554C1H1R8WA01# 3.6pF ±0.05pF GRM1553C1H3R6WA01# ±0.1pF GRM1553C1H3R6BA01# ±0.25pF GRM1553C1H3R6CA01# ±0.05pF GRM1554C1H1R9WA01# 3.7pF ±0.05pF GRM1553C1H3R7WA01# ±0.1pF GRM1554C1H1R9BA01# ±0.1pF GRM1553C1H3R7BA01# ±0.25pF GRM1554C1H1R9CA01# ±0.25pF GRM1553C1H3R7CA01# ±0.05pF GRM1554C1H2R0WA01# 3.8pF ±0.05pF GRM1553C1H3R8WA01# ±0.1pF GRM1554C1H2R0BA01# ±0.1pF GRM1553C1H3R8BA01# ±0.25pF GRM1554C1H2R0CA01# ±0.25pF GRM1553C1H3R8CA01# ±0.05pF GRM1553C1H2R1WA01# 3.9pF ±0.05pF GRM1553C1H3R9WA01# ±0.1pF GRM1553C1H2R1BA01# ±0.1pF GRM1553C1H3R9BA01# ±0.25pF GRM1553C1H2R1CA01# ±0.25pF GRM1553C1H3R9CA01# ±0.05pF GRM1553C1H2R2WA01# CH 4.0pF ±0.05pF GRM1552C1H4R0WA01# ±0.1pF GRM1553C1H2R2BA01# ±0.1pF GRM1552C1H4R0BA01# ±0.25pF GRM1553C1H2R2CA01# ±0.25pF GRM1552C1H4R0CA01# ±0.05pF GRM1553C1H2R3WA01# 4.1pF ±0.05pF GRM1552C1H4R1WA01# ±0.1pF GRM1553C1H2R3BA01# ±0.1pF GRM1552C1H4R1BA01# ±0.25pF GRM1553C1H2R3CA01# ±0.25pF GRM1552C1H4R1CA01# ±0.05pF GRM1553C1H2R4WA01# 4.2pF ±0.05pF GRM1552C1H4R2WA01# ±0.1pF GRM1553C1H2R4BA01# ±0.1pF GRM1552C1H4R2BA01# ±0.25pF GRM1553C1H2R4CA01# ±0.25pF GRM1552C1H4R2CA01# ±0.05pF GRM1553C1H2R5WA01# 4.3pF ±0.05pF GRM1553C1H2R6WA01# ±0.05pF GRM1552C1H4R3WA01# ±0.1pF GRM1552C1H4R3BA01# ±0.25pF GRM1553C1H2R5CA01# 2.7pF ±0.05pF GRM1553C1H3R2WA01# ±0.1pF GRM1554C1H1R4BA01# ±0.1pF GRM1553C1H2R5BA01# 2.6pF ±0.05pF GRM1553C1H3R1WA01# ±0.25pF GRM1554C1H1R3CA01# ±0.25pF GRM1554C1H1R8CA01# 2.0pF Part Number 2.9pF ±0.1pF GRM1554C1H1R8BA01# 1.9pF Tol. ±0.25pF GRM1552C1H4R3CA01# 4.4pF ±0.05pF GRM1552C1H4R4WA01# ±0.1pF GRM1553C1H2R6BA01# ±0.1pF GRM1552C1H4R4BA01# ±0.25pF GRM1553C1H2R6CA01# ±0.25pF GRM1552C1H4R4CA01# ±0.05pF GRM1553C1H2R7WA01# 4.5pF ±0.05pF GRM1552C1H4R5WA01# ±0.1pF GRM1553C1H2R7BA01# ±0.1pF GRM1552C1H4R5BA01# ±0.25pF GRM1553C1H2R7CA01# ±0.25pF GRM1552C1H4R5CA01# ±0.05pF GRM1553C1H2R8WA01# 4.6pF ±0.05pF GRM1552C1H4R6WA01# ±0.1pF GRM1553C1H2R8BA01# ±0.1pF GRM1552C1H4R6BA01# ±0.25pF GRM1553C1H2R8CA01# ±0.25pF GRM1552C1H4R6CA01# ±0.05pF GRM1553C1H2R9WA01# ±0.1pF GRM1553C1H2R9BA01# For General Purpose GRM Series ±0.05pF GRM1554C1H1R2WA01# Cap. Capacitor Array GNM Series ±0.25pF GRM1554C1H1R1CA01# 1.2pF Rated TC Voltage Code Low ESL LLp Series 1.1pF T max. High-Q Type GJM Series Part Number High Frequency GQM Series CK Tol. Monolithic Microchip GMA Series 0.55mm 50Vdc Cap. 4.7pF For Bonding GMD Series Rated TC Voltage Code Product Information T max. ±0.05pF GRM1552C1H4R7WA01# ±0.1pF GRM1552C1H4R7BA01# Part number # indicates the package specification code. 43 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.0×0.5mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.55mm 50Vdc CH Cap. Tol. Part Number T max. Rated TC Voltage Code Cap. Tol. Part Number 4.7pF ±0.25pF GRM1552C1H4R7CA01# 4.8pF ±0.05pF GRM1552C1H4R8WA01# ±0.1pF GRM1552C1H6R2BA01# ±0.1pF GRM1552C1H4R8BA01# ±0.25pF GRM1552C1H6R2CA01# 0.55mm 50Vdc CH 6.2pF ±0.25pF GRM1552C1H4R8CA01# 4.9pF 5.0pF ±0.05pF GRM1552C1H4R9WA01# ±0.5pF GRM1552C1H6R2DA01# 6.3pF ±0.1pF GRM1552C1H4R9BA01# ±0.1pF GRM1552C1H6R3BA01# ±0.25pF GRM1552C1H6R3CA01# ±0.05pF GRM1552C1H5R0WA01# ±0.5pF GRM1552C1H6R3DA01# Capacitor Array GNM Series 6.4pF ±0.1pF GRM1552C1H6R4BA01# ±0.05pF GRM1552C1H5R1WA01# ±0.25pF GRM1552C1H6R4CA01# ±0.25pF GRM1552C1H5R1CA01# ±0.5pF GRM1552C1H6R4DA01# 6.5pF Low ESL LLp Series ±0.5pF GRM1552C1H5R1DA01# ±0.1pF GRM1552C1H6R5BA01# ±0.25pF GRM1552C1H6R5CA01# ±0.1pF GRM1552C1H5R2BA01# ±0.5pF GRM1552C1H6R5DA01# 6.6pF ±0.1pF GRM1552C1H6R6BA01# ±0.05pF GRM1552C1H5R3WA01# ±0.25pF GRM1552C1H6R6CA01# ±0.1pF GRM1552C1H5R3BA01# ±0.5pF GRM1552C1H6R6DA01# 6.7pF High-Q Type GJM Series ±0.5pF GRM1552C1H5R3DA01# ±0.1pF GRM1552C1H6R7BA01# ±0.25pF GRM1552C1H6R7CA01# ±0.1pF GRM1552C1H5R4BA01# ±0.5pF GRM1552C1H6R7DA01# 6.8pF ±0.1pF GRM1552C1H6R8BA01# ±0.05pF GRM1552C1H5R5WA01# ±0.25pF GRM1552C1H6R8CA01# High Frequency GQM Series ±0.25pF GRM1552C1H5R5CA01# ±0.5pF GRM1552C1H6R8DA01# 6.9pF ±0.5pF GRM1552C1H5R5DA01# ±0.1pF GRM1552C1H6R9BA01# ±0.25pF GRM1552C1H6R9CA01# ±0.1pF GRM1552C1H5R6BA01# ±0.5pF GRM1552C1H6R9DA01# 7.0pF Monolithic Microchip GMA Series ±0.5pF GRM1552C1H5R6DA01# ±0.1pF GRM1552C1H7R0BA01# ±0.25pF GRM1552C1H7R0CA01# ±0.1pF GRM1552C1H5R7BA01# ±0.5pF GRM1552C1H7R0DA01# 7.1pF ±0.5pF GRM1552C1H5R7DA01# ±0.1pF GRM1552C1H7R1BA01# ±0.25pF GRM1552C1H7R1CA01# ±0.1pF GRM1552C1H5R8BA01# ±0.5pF GRM1552C1H7R1DA01# 7.2pF For Bonding GMD Series ±0.1pF GRM1552C1H7R2BA01# ±0.05pF GRM1552C1H5R9WA01# ±0.25pF GRM1552C1H7R2CA01# ±0.25pF GRM1552C1H5R9CA01# ±0.5pF GRM1552C1H7R2DA01# 7.3pF ±0.05pF GRM1552C1H7R3WA01# ±0.5pF GRM1552C1H5R9DA01# ±0.1pF GRM1552C1H7R3BA01# ±0.05pF GRM1552C1H6R0WA01# ±0.25pF GRM1552C1H7R3CA01# ±0.1pF GRM1552C1H6R0BA01# Product Information ±0.25pF GRM1552C1H6R0CA01# 6.1pF ±0.05pF GRM1552C1H7R2WA01# ±0.5pF GRM1552C1H5R8DA01# ±0.1pF GRM1552C1H5R9BA01# 6.0pF ±0.05pF GRM1552C1H7R1WA01# ±0.05pF GRM1552C1H5R8WA01# ±0.25pF GRM1552C1H5R8CA01# 5.9pF ±0.05pF GRM1552C1H7R0WA01# ±0.05pF GRM1552C1H5R7WA01# ±0.25pF GRM1552C1H5R7CA01# 5.8pF ±0.05pF GRM1552C1H6R9WA01# ±0.05pF GRM1552C1H5R6WA01# ±0.25pF GRM1552C1H5R6CA01# 5.7pF ±0.05pF GRM1552C1H6R8WA01# ±0.5pF GRM1552C1H5R4DA01# ±0.1pF GRM1552C1H5R5BA01# 5.6pF ±0.05pF GRM1552C1H6R7WA01# ±0.05pF GRM1552C1H5R4WA01# ±0.25pF GRM1552C1H5R4CA01# 5.5pF ±0.05pF GRM1552C1H6R6WA01# ±0.5pF GRM1552C1H5R2DA01# ±0.25pF GRM1552C1H5R3CA01# 5.4pF ±0.05pF GRM1552C1H6R5WA01# ±0.05pF GRM1552C1H5R2WA01# ±0.25pF GRM1552C1H5R2CA01# 5.3pF ±0.05pF GRM1552C1H6R4WA01# ±0.25pF GRM1552C1H5R0CA01# ±0.1pF GRM1552C1H5R1BA01# 5.2pF ±0.05pF GRM1552C1H6R3WA01# ±0.25pF GRM1552C1H4R9CA01# ±0.1pF GRM1552C1H5R0BA01# 5.1pF ±0.05pF GRM1552C1H6R2WA01# ±0.5pF GRM1552C1H7R3DA01# 7.4pF ±0.05pF GRM1552C1H7R4WA01# ±0.5pF GRM1552C1H6R0DA01# ±0.1pF GRM1552C1H7R4BA01# ±0.05pF GRM1552C1H6R1WA01# ±0.25pF GRM1552C1H7R4CA01# ±0.5pF GRM1552C1H7R4DA01# ±0.1pF GRM1552C1H6R1BA01# ±0.25pF GRM1552C1H6R1CA01# ±0.5pF GRM1552C1H6R1DA01# 7.5pF ±0.05pF GRM1552C1H7R5WA01# ±0.1pF GRM1552C1H7R5BA01# Part number # indicates the package specification code. 44 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.0×0.5mm) CH 8.9pF ±0.1pF GRM1552C1H8R9BA01# ±0.25pF GRM1552C1H8R9CA01# ±0.5pF GRM1552C1H8R9DA01# 9.0pF ±0.5pF GRM1552C1H7R6DA01# ±0.1pF GRM1552C1H9R0BA01# ±0.25pF GRM1552C1H9R0CA01# ±0.1pF GRM1552C1H7R7BA01# ±0.5pF GRM1552C1H9R0DA01# 9.1pF ±0.1pF GRM1552C1H9R1BA01# ±0.05pF GRM1552C1H7R8WA01# ±0.25pF GRM1552C1H9R1CA01# ±0.25pF GRM1552C1H7R8CA01# ±0.5pF GRM1552C1H9R1DA01# 9.2pF ±0.5pF GRM1552C1H7R8DA01# ±0.1pF GRM1552C1H9R2BA01# ±0.25pF GRM1552C1H9R2CA01# ±0.1pF GRM1552C1H7R9BA01# ±0.5pF GRM1552C1H9R2DA01# 9.3pF ±0.1pF GRM1552C1H9R3BA01# ±0.05pF GRM1552C1H8R0WA01# ±0.25pF GRM1552C1H9R3CA01# ±0.1pF GRM1552C1H8R0BA01# ±0.5pF GRM1552C1H9R3DA01# 9.4pF ±0.5pF GRM1552C1H8R0DA01# ±0.1pF GRM1552C1H9R4BA01# ±0.25pF GRM1552C1H9R4CA01# ±0.1pF GRM1552C1H8R1BA01# ±0.5pF GRM1552C1H9R4DA01# 9.5pF ±0.1pF GRM1552C1H9R5BA01# ±0.05pF GRM1552C1H8R2WA01# ±0.25pF GRM1552C1H9R5CA01# ±0.25pF GRM1552C1H8R2CA01# ±0.5pF GRM1552C1H9R5DA01# 9.6pF ±0.5pF GRM1552C1H8R2DA01# ±0.1pF GRM1552C1H9R6BA01# ±0.25pF GRM1552C1H9R6CA01# ±0.1pF GRM1552C1H8R3BA01# ±0.5pF GRM1552C1H9R6DA01# 9.7pF ±0.5pF GRM1552C1H8R3DA01# ±0.1pF GRM1552C1H9R7BA01# ±0.25pF GRM1552C1H9R7CA01# ±0.1pF GRM1552C1H8R4BA01# ±0.5pF GRM1552C1H9R7DA01# 9.8pF ±0.5pF GRM1552C1H8R4DA01# ±0.1pF GRM1552C1H9R8BA01# ±0.25pF GRM1552C1H9R8CA01# ±0.1pF GRM1552C1H8R5BA01# ±0.5pF GRM1552C1H9R8DA01# 9.9pF ±0.05pF GRM1552C1H9R9WA01# ±0.5pF GRM1552C1H8R5DA01# ±0.1pF GRM1552C1H9R9BA01# ±0.05pF GRM1552C1H8R6WA01# ±0.25pF GRM1552C1H9R9CA01# ±0.1pF GRM1552C1H8R6BA01# ±0.25pF GRM1552C1H8R6CA01# ±0.5pF GRM1552C1H9R9DA01# 10pF ±0.5pF GRM1552C1H8R6DA01# ±0.05pF GRM1552C1H8R7WA01# 12pF ±0.1pF GRM1552C1H8R7BA01# ±0.25pF GRM1552C1H8R7CA01# 15pF ±0.5pF GRM1552C1H8R7DA01# 8.8pF ±0.05pF GRM1552C1H9R8WA01# ±0.05pF GRM1552C1H8R5WA01# ±0.25pF GRM1552C1H8R5CA01# 8.7pF ±0.05pF GRM1552C1H9R7WA01# ±0.05pF GRM1552C1H8R4WA01# ±0.25pF GRM1552C1H8R4CA01# 8.6pF ±0.05pF GRM1552C1H9R6WA01# ±0.05pF GRM1552C1H8R3WA01# ±0.25pF GRM1552C1H8R3CA01# 8.5pF ±0.05pF GRM1552C1H9R5WA01# ±0.5pF GRM1552C1H8R1DA01# ±0.1pF GRM1552C1H8R2BA01# 8.4pF ±0.05pF GRM1552C1H9R4WA01# ±0.05pF GRM1552C1H8R1WA01# ±0.25pF GRM1552C1H8R1CA01# 8.3pF ±0.05pF GRM1552C1H9R3WA01# ±0.5pF GRM1552C1H7R9DA01# ±0.25pF GRM1552C1H8R0CA01# 8.2pF ±0.05pF GRM1552C1H9R2WA01# ±0.05pF GRM1552C1H7R9WA01# ±0.25pF GRM1552C1H7R9CA01# 8.1pF ±0.05pF GRM1552C1H9R1WA01# ±0.5pF GRM1552C1H7R7DA01# ±0.1pF GRM1552C1H7R8BA01# 8.0pF ±0.05pF GRM1552C1H9R0WA01# ±0.05pF GRM1552C1H7R7WA01# ±0.25pF GRM1552C1H7R7CA01# 7.9pF ±0.05pF GRM1552C1H8R9WA01# ±0.05pF GRM1552C1H7R6WA01# ±0.1pF GRM1552C1H7R6BA01# 7.8pF Part Number ±0.5pF GRM1552C1H7R5DA01# ±0.25pF GRM1552C1H7R6CA01# 7.7pF Tol. ±0.05pF GRM1552C1H8R8WA01# 18pF ±0.1pF GRM1552C1H8R8BA01# ±0.25pF GRM1552C1H8R8CA01# ±0.5pF GRM1552C1H8R8DA01# For General Purpose GRM Series 0.55mm 50Vdc Cap. Capacitor Array GNM Series Rated TC Voltage Code Low ESL LLp Series 7.6pF ±0.25pF GRM1552C1H7R5CA01# T max. High-Q Type GJM Series 7.5pF Part Number High Frequency GQM Series CH Tol. Monolithic Microchip GMA Series 0.55mm 50Vdc Cap. For Bonding GMD Series Rated TC Voltage Code 22pF ±2% GRM1552C1H100GA01# ±5% GRM1552C1H100JA01# ±2% GRM1552C1H120GA01# ±5% GRM1552C1H120JA01# ±2% GRM1552C1H150GA01# ±5% GRM1552C1H150JA01# ±2% GRM1552C1H180GA01# ±5% GRM1552C1H180JA01# ±2% GRM1552C1H220GA01# ±5% GRM1552C1H220JA01# Product Information T max. Part number # indicates the package specification code. 45 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.0×0.5mm) T max. Rated TC Voltage Code Part Number 27pF ±2% GRM1552C1H270GA01# ±5% GRM1552C1H270JA01# ±2% GRM1552C1H330GA01# ±5% 39pF 47pF T max. Rated TC Voltage Code Tol. GRM1556P1H270JZ01# 27pF PK 1.0pF 2.0pF ±0.25pF GRM1554P1H2R0CZ01# GRM1552C1H330JA01# PJ 3.0pF ±0.25pF GRM1553P1H3R0CZ01# ±2% GRM1552C1H390GA01# PH 4.0pF ±0.25pF GRM1552P1H4R0CZ01# ±5% GRM1552C1H390JA01# 5.0pF ±0.25pF GRM1552P1H5R0CZ01# ±2% GRM1552C1H470GA01# 6.0pF ±0.5pF GRM1552P1H6R0DZ01# ±5% GRM1552C1H470JA01# 7.0pF ±0.5pF GRM1552P1H7R0DZ01# ±2% GRM1552C1H560GA01# 8.0pF ±0.5pF GRM1552P1H8R0DZ01# ±5% GRM1552C1H560JA01# 9.0pF ±0.5pF GRM1552P1H9R0DZ01# ±2% GRM1552C1H680GA01# 10pF ±5% GRM1552P1H100JZ01# ±5% GRM1552C1H680JA01# 12pF ±5% GRM1552P1H120JZ01# ±2% GRM1552C1H820GA01# 15pF ±5% GRM1552P1H150JZ01# ±5% GRM1552C1H820JA01# 18pF ±5% GRM1552P1H180JZ01# ±2% GRM1552C1H101GA01# 22pF ±5% GRM1552P1H220JZ01# ±5% GRM1552C1H101JA01# 27pF ±5% GRM1552P1H270JZ01# ±2% GRM1552C1H121GA01# 1.0pF ±0.25pF GRM1556R1H1R0CD01# ±5% GRM1552C1H121JA01# 2.0pF ±0.25pF GRM1556R1H2R0CZ01# ±2% GRM1552C1H151GA01# 3.0pF ±0.25pF GRM1556R1H3R0CZ01# ±5% GRM1552C1H151JA01# 4.0pF ±0.25pF GRM1556R1H4R0CZ01# 180pF ±2% GRM1552C1H181GA01# 5.0pF ±0.25pF GRM1556R1H5R0CZ01# ±5% GRM1552C1H181JA01# 6.0pF ±0.5pF GRM1556R1H6R0DZ01# 220pF ±2% GRM1552C1H221GA01# 7.0pF ±0.5pF GRM1556R1H7R0DZ01# ±5% GRM1552C1H221JA01# 8.0pF ±0.5pF GRM1556R1H8R0DZ01# ±2% GRM1552C1H271GA01# 9.0pF ±0.5pF GRM1556R1H9R0DZ01# ±5% GRM1552C1H271JA01# 10pF ±5% GRM1556R1H100JZ01# ±2% GRM1552C1H331GA01# 12pF ±5% GRM1556R1H120JZ01# ±5% GRM1552C1H331JA01# 15pF ±5% GRM1556R1H150JZ01# 390pF ±2% GRM1552C1H391GA01# 18pF ±5% GRM1556R1H180JZ01# ±5% GRM1552C1H391JA01# 22pF ±5% GRM1556R1H220JZ01# 470pF ±2% GRM1552C1H471GA01# 27pF ±5% GRM1556R1H270JZ01# ±5% GRM1552C1H471JA01# ±5% GRM1556R1H330JZ01# 560pF ±2% GRM1552C1H561GA01# ±5% GRM1552C1H561JA01# 680pF ±2% GRM1552C1H681GA01# RJ 3.0pF ±0.25pF GRM1553R1H3R0CZ01# ±5% GRM1552C1H681JA01# RH 4.0pF ±0.25pF GRM1552R1H4R0CZ01# 820pF ±2% GRM1552C1H821GA01# 5.0pF ±0.25pF GRM1552R1H5R0CZ01# ±5% GRM1552C1H821JA01# 6.0pF ±0.5pF GRM1552R1H6R0DZ01# 1000pF ±2% GRM1552C1H102GA01# 7.0pF ±0.5pF GRM1552R1H7R0DZ01# ±5% GRM1552C1H102JA01# 8.0pF ±0.5pF GRM1552R1H8R0DZ01# 1.0pF ±0.25pF GRM1556P1H1R0CZ01# 9.0pF ±0.5pF GRM1552R1H9R0DZ01# 2.0pF ±0.25pF GRM1556P1H2R0CZ01# 10pF ±5% GRM1552R1H100JZ01# 3.0pF ±0.25pF GRM1556P1H3R0CZ01# 12pF ±5% GRM1552R1H120JZ01# 4.0pF ±0.25pF GRM1556P1H4R0CZ01# 15pF ±5% GRM1552R1H150JZ01# 5.0pF ±0.25pF GRM1556P1H5R0CZ01# 18pF ±5% GRM1552R1H180JZ01# 6.0pF ±0.5pF GRM1556P1H6R0DZ01# 22pF ±5% GRM1552R1H220JZ01# 7.0pF ±0.5pF GRM1556P1H7R0DZ01# 27pF ±5% GRM1552R1H270JZ01# 8.0pF ±0.5pF GRM1556P1H8R0DZ01# ±5% GRM1552R1H330JZ01# 9.0pF ±0.5pF GRM1556P1H9R0DZ01# Capacitor Array GNM Series 56pF 68pF 82pF 100pF Low ESL LLp Series 120pF 150pF High-Q Type GJM Series 270pF 330pF P2H R2H 33pF RK ±0.25pF GRM1554P1H1R0CZ01# 1.0pF ±0.25pF GRM1554R1H1R0CD01# 2.0pF ±0.25pF GRM1554R1H2R0CZ01# For Bonding GMD Series 33pF Product Information S2H ±5% Part Number P2H 33pF 0.55mm 50Vdc Cap. Monolithic Microchip GMA Series CH Tol. High Frequency GQM Series For General Purpose GRM Series 0.55mm 50Vdc Cap. 1.0pF ±0.25pF GRM1556S1H1R0CD01# 10pF ±5% GRM1556P1H100JZ01# 2.0pF ±0.25pF GRM1556S1H2R0CZ01# 12pF ±5% GRM1556P1H120JZ01# 3.0pF ±0.25pF GRM1556S1H3R0CZ01# 15pF ±5% GRM1556P1H150JZ01# 4.0pF ±0.25pF GRM1556S1H4R0CZ01# 18pF ±5% GRM1556P1H180JZ01# 5.0pF ±0.25pF GRM1556S1H5R0CZ01# 22pF ±5% GRM1556P1H220JZ01# 6.0pF ±0.5pF GRM1556S1H6R0DZ01# Part number # indicates the package specification code. 46 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.0×0.5mm) Tol. Part Number 7.0pF ±0.5pF GRM1556S1H7R0DZ01# 5.0pF ±0.25pF GRM1552T1H5R0CD01# 8.0pF ±0.5pF GRM1556S1H8R0DZ01# 6.0pF ±0.5pF GRM1552T1H6R0DD01# 9.0pF ±0.5pF GRM1556S1H9R0DZ01# 7.0pF ±0.5pF GRM1552T1H7R0DD01# 0.55mm 50Vdc TH 10pF ±5% GRM1556S1H100JZ01# 8.0pF ±0.5pF GRM1552T1H8R0DD01# 12pF ±5% GRM1556S1H120JZ01# 9.0pF ±0.5pF GRM1552T1H9R0DD01# 15pF ±5% GRM1556S1H150JZ01# 10pF ±5% GRM1552T1H100JD01# 18pF ±5% GRM1556S1H180JZ01# 12pF ±5% GRM1552T1H120JD01# 22pF ±5% GRM1556S1H220JZ01# 15pF ±5% GRM1552T1H150JD01# 27pF ±5% GRM1556S1H270JZ01# 18pF ±5% GRM1552T1H180JD01# 33pF ±5% GRM1556S1H330JZ01# 22pF ±5% GRM1552T1H220JD01# ±5% GRM1556S1H390JZ01# 27pF ±5% GRM1552T1H270JD01# 1.0pF ±0.25pF GRM1554S1H1R0CD01# 33pF ±5% GRM1552T1H330JD01# 2.0pF ±0.25pF GRM1554S1H2R0CZ01# 39pF ±5% GRM1552T1H390JD01# SJ 3.0pF ±0.25pF GRM1553S1H3R0CZ01# 47pF ±5% GRM1552T1H470JD01# SH 4.0pF ±0.25pF GRM1552S1H4R0CZ01# 56pF ±5% GRM1552T1H560JD01# 5.0pF ±0.25pF GRM1552S1H5R0CZ01# 68pF ±5% GRM1552T1H680JD01# 6.0pF ±0.5pF GRM1552S1H6R0DZ01# 82pF ±5% GRM1552T1H820JD01# 7.0pF ±0.5pF GRM1552S1H7R0DZ01# 100pF ±5% GRM1552T1H101JD01# 8.0pF ±0.5pF GRM1552S1H8R0DZ01# 9.0pF ±0.5pF GRM1552S1H9R0DZ01# 39pF SK T2H UK 1.0pF ±0.25pF GRM1554U1H1R0CZ01# 2.0pF ±0.25pF GRM1554U1H2R0CZ01# 3.0pF ±0.25pF GRM1553U1H3R0CZ01# 10pF ±5% GRM1552S1H100JZ01# 12pF ±5% GRM1552S1H120JZ01# 4.0pF ±0.25pF GRM1553U1H4R0CZ01# 15pF ±5% GRM1552S1H150JZ01# 5.0pF ±0.25pF GRM1553U1H5R0CZ01# 18pF ±5% GRM1552S1H180JZ01# 6.0pF ±0.5pF GRM1553U1H6R0DZ01# 22pF ±5% GRM1552S1H220JZ01# 7.0pF ±0.5pF GRM1553U1H7R0DZ01# 27pF ±5% GRM1552S1H270JZ01# 8.0pF ±0.5pF GRM1553U1H8R0DZ01# 33pF ±5% GRM1552S1H330JZ01# 9.0pF ±0.5pF GRM1553U1H9R0DZ01# 39pF ±5% GRM1552S1H390JZ01# 10pF UJ ±5% GRM1553U1H100JZ01# 1.0pF ±0.25pF GRM1556T1H1R0CD01# 12pF ±5% GRM1553U1H120JZ01# 2.0pF ±0.25pF GRM1556T1H2R0CD01# 15pF ±5% GRM1553U1H150JZ01# 3.0pF ±0.25pF GRM1556T1H3R0CD01# 18pF ±5% GRM1553U1H180JZ01# 4.0pF ±0.25pF GRM1556T1H4R0CD01# 22pF ±5% GRM1553U1H220JZ01# 5.0pF ±0.25pF GRM1556T1H5R0CD01# 27pF ±5% GRM1553U1H270JZ01# 6.0pF ±0.5pF GRM1556T1H6R0DD01# 33pF ±5% GRM1553U1H330JZ01# 7.0pF ±0.5pF GRM1556T1H7R0DD01# 39pF ±5% GRM1553U1H390JZ01# 8.0pF ±0.5pF GRM1556T1H8R0DD01# 47pF ±5% GRM1553U1H470JZ01# 9.0pF ±0.5pF GRM1556T1H9R0DD01# 56pF ±5% GRM1553U1H560JZ01# 10pF ±5% GRM1556T1H100JD01# 68pF ±5% GRM1553U1H680JZ01# 12pF ±5% GRM1556T1H120JD01# 82pF ±5% GRM1553U1H820JZ01# 15pF ±5% GRM1556T1H150JD01# 100pF ±5% GRM1553U1H101JZ01# 18pF ±5% GRM1556T1H180JD01# 120pF ±5% GRM1553U1H121JZ01# 22pF ±5% GRM1556T1H220JD01# 150pF ±5% GRM1553U1H151JZ01# 27pF ±5% GRM1556T1H270JD01# 33pF ±5% GRM1556T1H330JD01# 39pF ±5% 47pF 180pF ±5% GRM1553U1H181JZ01# 1200pF ±5% GRM1551X1A122JA01# GRM1556T1H390JD01# 1500pF ±5% GRM1551X1A152JA01# ±5% GRM1556T1H470JD01# 1800pF ±5% GRM1551X1A182JA01# 56pF ±5% GRM1556T1H560JD01# 2200pF ±5% GRM1551X1A222JA01# 68pF ±5% GRM1556T1H680JD01# 2700pF ±5% GRM1551X1A272JA01# 82pF ±5% GRM1556T1H820JD01# 3300pF ±5% GRM1551X1A332JA01# 100pF ±5% GRM1556T1H101JD01# 3900pF ±5% GRM1551X1A392JA01# 4700pF ±5% GRM1551X1A472JA01# 1200pF ±5% GRM1557U1A122JA01# 10Vdc SL 1.0pF ±0.25pF GRM1554T1H1R0CD01# 2.0pF ±0.25pF GRM1554T1H2R0CD01# TJ 3.0pF ±0.25pF GRM1553T1H3R0CD01# 1500pF ±5% GRM1557U1A152JA01# TH 4.0pF ±0.25pF GRM1552T1H4R0CD01# 1800pF ±5% GRM1557U1A182JA01# TK U2J For General Purpose GRM Series Cap. Capacitor Array GNM Series Rated TC Voltage Code Low ESL LLp Series T max. High-Q Type GJM Series Part Number High Frequency GQM Series S2H Tol. Monolithic Microchip GMA Series 0.55mm 50Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. Part number # indicates the package specification code. 47 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.0×0.5mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.55mm 10Vdc U2J UJ Part Number T max. Rated TC Voltage Code Cap. 0.9mm 100Vdc C0G 0.9pF ±0.1pF GRM1885C2AR90BA01# 1.0pF ±0.05pF GRM1885C2A1R0WA01# Capacitor Array GNM Series Cap. Tol. 2200pF ±5% GRM1557U1A222JA01# 2700pF ±5% GRM1557U1A272JA01# 3300pF ±5% GRM1557U1A332JA01# ±0.1pF GRM1885C2A1R0BA01# 3900pF ±5% GRM1557U1A392JA01# ±0.25pF GRM1885C2A1R0CA01# 4700pF ±5% GRM1557U1A472JA01# 1200pF ±5% GRM1553U1A122JA01# ±0.1pF GRM1885C2A1R1BA01# 1500pF ±5% GRM1553U1A152JA01# ±0.25pF GRM1885C2A1R1CA01# 1800pF ±5% GRM1553U1A182JA01# 2200pF ±5% GRM1553U1A222JA01# ±0.1pF GRM1885C2A1R2BA01# 2700pF ±5% GRM1553U1A272JA01# ±0.25pF GRM1885C2A1R2CA01# 3300pF ±5% GRM1553U1A332JA01# 3900pF ±5% GRM1553U1A392JA01# ±0.1pF GRM1885C2A1R3BA01# 4700pF ±5% GRM1553U1A472JA01# ±0.25pF GRM1885C2A1R3CA01# 1.1pF 1.2pF 1.3pF 1.4pF Low ESL LLp Series 0.5mm SL High-Q Type GJM Series U2J High Frequency GQM Series UJ 10Vdc ±0.05pF GRM1885C2A1R1WA01# ±0.05pF GRM1885C2A1R2WA01# ±0.05pF GRM1885C2A1R3WA01# ±0.05pF GRM1885C2A1R4WA01# ±0.25pF GRM1885C2A1R4CA01# Rated TC Voltage Code 50Vdc Part Number ±0.1pF GRM1885C2A1R4BA01# c 1.6×0.8mm T max. Tol. SL Monolithic Microchip GMA Series U2J UJ ±0.05pF GRM1885C2A1R5WA01# For Bonding GMD Series Tol. 2200pF ±5% GRM1851X1H222JA44# 2700pF ±5% GRM1851X1H272JA44# 3300pF ±5% GRM1851X1H332JA44# 3900pF ±5% GRM1851X1H392JA44# 4700pF ±5% GRM1851X1H472JA44# 2200pF ±5% GRM1857U1H222JA44# ±0.1pF GRM1885C2A1R7BA01# 2700pF ±5% GRM1857U1H272JA44# ±0.25pF GRM1885C2A1R7CA01# 3300pF ±5% GRM1857U1H332JA44# 3900pF ±5% GRM1857U1H392JA44# ±0.1pF GRM1885C2A1R8BA01# 4700pF ±5% GRM1857U1H472JA44# ±0.25pF GRM1885C2A1R8CA01# 2200pF ±5% GRM1853U1H222JA44# 2700pF ±5% GRM1853U1H272JA44# ±0.1pF GRM1885C2A1R9BA01# 3300pF ±5% GRM1853U1H332JA44# ±0.25pF GRM1885C2A1R9CA01# 3900pF ±5% GRM1853U1H392JA44# 4700pF ±5% GRM1853U1H472JA44# ±0.1pF GRM1885C2A2R0BA01# 5600pF ±5% GRM1851X1A562JA44# ±0.25pF GRM1885C2A2R0CA01# 6800pF ±5% GRM1851X1A682JA44# 8200pF ±5% GRM1851X1A822JA44# ±0.1pF GRM1885C2A2R1BA01# 10000pF ±5% GRM1851X1A103JA44# ±0.25pF GRM1885C2A2R1CA01# 5600pF ±5% GRM1857U1A562JA44# 6800pF ±5% GRM1857U1A682JA44# ±0.1pF GRM1885C2A2R2BA01# 8200pF ±5% GRM1857U1A822JA44# ±0.25pF GRM1885C2A2R2CA01# 10000pF ±5% GRM1857U1A103JA44# 5600pF ±5% GRM1853U1A562JA44# 6800pF ±5% GRM1853U1A682JA44# 8200pF ±5% GRM1853U1A822JA44# ±5% GRM1853U1A103JA44# ±0.1pF GRM1885C2A1R5BA01# 10000pF 0.9mm 100Vdc C0G Part Number 1.5pF Cap. 0.5pF Product Information 0.7pF 0.8pF ±0.05pF GRM1885C2A1R6WA01# ±0.1pF GRM1885C2A1R6BA01# ±0.25pF GRM1885C2A1R6CA01# 1.7pF 1.8pF 1.9pF 2.0pF 2.1pF 2.2pF 2.3pF ±0.05pF GRM1885C2A1R7WA01# ±0.05pF GRM1885C2A1R8WA01# ±0.05pF GRM1885C2A1R9WA01# ±0.05pF GRM1885C2A2R0WA01# ±0.05pF GRM1885C2A2R1WA01# ±0.05pF GRM1885C2A2R2WA01# ±0.05pF GRM1885C2A2R3WA01# ±0.1pF GRM1885C2A2R3BA01# ±0.25pF GRM1885C2A2R3CA01# 2.4pF ±0.05pF GRM1885C2A2R4WA01# ±0.1pF GRM1885C2A2R4BA01# ±0.25pF GRM1885C2A2R4CA01# 2.5pF ±0.05pF GRM1885C2A2R5WA01# ±0.05pF GRM1885C2AR60WA01# ±0.1pF GRM1885C2A2R5BA01# ±0.1pF GRM1885C2AR60BA01# ±0.25pF GRM1885C2A2R5CA01# ±0.05pF GRM1885C2AR70WA01# 2.6pF ±0.05pF GRM1885C2A2R6WA01# ±0.1pF GRM1885C2AR70BA01# ±0.1pF GRM1885C2A2R6BA01# ±0.05pF GRM1885C2AR80WA01# ±0.25pF GRM1885C2A2R6CA01# ±0.1pF GRM1885C2AR80BA01# 0.9pF 1.6pF ±0.05pF GRM1885C2AR50WA01# ±0.1pF GRM1885C2AR50BA01# 0.6pF ±0.25pF GRM1885C2A1R5CA01# ±0.05pF GRM1885C2AR90WA01# 2.7pF ±0.05pF GRM1885C2A2R7WA01# ±0.1pF GRM1885C2A2R7BA01# Part number # indicates the package specification code. 48 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.6×0.8mm) 3.0pF 3.1pF 3.2pF 3.3pF 3.4pF 4.5pF ±0.25pF GRM1885C2A4R5CA01# 4.6pF ±0.05pF GRM1885C2A4R6WA01# ±0.1pF GRM1885C2A4R6BA01# ±0.25pF GRM1885C2A2R8CA01# ±0.25pF GRM1885C2A4R6CA01# ±0.05pF GRM1885C2A2R9WA01# 4.7pF ±0.1pF GRM1885C2A2R9BA01# ±0.1pF GRM1885C2A4R7BA01# ±0.25pF GRM1885C2A4R7CA01# ±0.05pF GRM1885C2A3R0WA01# 4.8pF ±0.1pF GRM1885C2A4R8BA01# ±0.25pF GRM1885C2A3R0CA01# ±0.25pF GRM1885C2A4R8CA01# ±0.05pF GRM1885C2A3R1WA01# 4.9pF ±0.1pF GRM1885C2A4R9BA01# ±0.25pF GRM1885C2A3R1CA01# ±0.25pF GRM1885C2A4R9CA01# ±0.05pF GRM1885C2A3R2WA01# 5.0pF ±0.1pF GRM1885C2A5R0BA01# ±0.25pF GRM1885C2A3R2CA01# ±0.25pF GRM1885C2A5R0CA01# ±0.05pF GRM1885C2A3R3WA01# 5.1pF ±0.1pF GRM1885C2A5R1BA01# ±0.25pF GRM1885C2A3R3CA01# ±0.25pF GRM1885C2A5R1CA01# ±0.05pF GRM1885C2A3R4WA01# ±0.5pF GRM1885C2A5R1DA01# 5.2pF ±0.25pF GRM1885C2A3R4CA01# ±0.1pF GRM1885C2A5R2BA01# ±0.25pF GRM1885C2A5R2CA01# ±0.5pF GRM1885C2A5R2DA01# 5.3pF ±0.1pF GRM1885C2A5R3BA01# ±0.1pF GRM1885C2A3R6BA01# ±0.25pF GRM1885C2A5R3CA01# ±0.05pF GRM1885C2A3R7WA01# ±0.5pF GRM1885C2A5R3DA01# 5.4pF ±0.1pF GRM1885C2A3R7BA01# ±0.1pF GRM1885C2A5R4BA01# ±0.25pF GRM1885C2A5R4CA01# ±0.05pF GRM1885C2A3R8WA01# ±0.5pF GRM1885C2A5R4DA01# 5.5pF ±0.25pF GRM1885C2A3R8CA01# ±0.1pF GRM1885C2A5R5BA01# ±0.25pF GRM1885C2A5R5CA01# ±0.5pF GRM1885C2A5R5DA01# 5.6pF ±0.05pF GRM1885C2A5R6WA01# ±0.05pF GRM1885C2A4R0WA01# ±0.1pF GRM1885C2A5R6BA01# ±0.1pF GRM1885C2A4R0BA01# ±0.25pF GRM1885C2A5R6CA01# ±0.05pF GRM1885C2A4R1WA01# ±0.5pF GRM1885C2A5R6DA01# 5.7pF ±0.05pF GRM1885C2A5R7WA01# ±0.1pF GRM1885C2A4R1BA01# ±0.1pF GRM1885C2A5R7BA01# ±0.25pF GRM1885C2A4R1CA01# ±0.25pF GRM1885C2A5R7CA01# ±0.05pF GRM1885C2A4R2WA01# ±0.5pF GRM1885C2A5R7DA01# 5.8pF ±0.05pF GRM1885C2A5R8WA01# ±0.25pF GRM1885C2A4R2CA01# ±0.1pF GRM1885C2A5R8BA01# ±0.05pF GRM1885C2A4R3WA01# ±0.25pF GRM1885C2A5R8CA01# ±0.1pF GRM1885C2A4R3BA01# ±0.5pF GRM1885C2A5R8DA01# 5.9pF ±0.05pF GRM1885C2A5R9WA01# ±0.05pF GRM1885C2A4R4WA01# ±0.1pF GRM1885C2A5R9BA01# ±0.1pF GRM1885C2A4R4BA01# ±0.25pF GRM1885C2A5R9CA01# ±0.5pF GRM1885C2A5R9DA01# ±0.25pF GRM1885C2A4R4CA01# 4.5pF ±0.05pF GRM1885C2A5R5WA01# ±0.05pF GRM1885C2A3R9WA01# ±0.25pF GRM1885C2A4R3CA01# 4.4pF ±0.05pF GRM1885C2A5R4WA01# ±0.25pF GRM1885C2A3R7CA01# ±0.1pF GRM1885C2A4R2BA01# 4.3pF ±0.05pF GRM1885C2A5R3WA01# ±0.05pF GRM1885C2A3R6WA01# ±0.25pF GRM1885C2A4R0CA01# 4.2pF ±0.05pF GRM1885C2A5R2WA01# ±0.05pF GRM1885C2A3R5WA01# ±0.1pF GRM1885C2A3R9BA01# 4.1pF ±0.05pF GRM1885C2A5R1WA01# ±0.1pF GRM1885C2A3R3BA01# ±0.25pF GRM1885C2A3R9CA01# 4.0pF ±0.05pF GRM1885C2A5R0WA01# ±0.1pF GRM1885C2A3R2BA01# ±0.1pF GRM1885C2A3R8BA01# 3.9pF ±0.05pF GRM1885C2A4R9WA01# ±0.1pF GRM1885C2A3R1BA01# ±0.25pF GRM1885C2A3R6CA01# 3.8pF ±0.05pF GRM1885C2A4R8WA01# ±0.1pF GRM1885C2A3R0BA01# ±0.1pF GRM1885C2A3R5BA01# 3.7pF ±0.05pF GRM1885C2A4R7WA01# ±0.25pF GRM1885C2A2R9CA01# ±0.25pF GRM1885C2A3R5CA01# 3.6pF Part Number ±0.1pF GRM1885C2A2R8BA01# ±0.1pF GRM1885C2A3R4BA01# 3.5pF 0.9mm 100Vdc C0G Tol. ±0.05pF GRM1885C2A4R5WA01# ±0.1pF GRM1885C2A4R5BA01# For General Purpose GRM Series 2.9pF Cap. Capacitor Array GNM Series ±0.05pF GRM1885C2A2R8WA01# Rated TC Voltage Code Low ESL LLp Series ±0.25pF GRM1885C2A2R7CA01# 2.8pF T max. High-Q Type GJM Series 2.7pF Part Number High Frequency GQM Series 0.9mm 100Vdc C0G Tol. Monolithic Microchip GMA Series Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. 6.0pF ±0.05pF GRM1885C2A6R0WA01# ±0.1pF GRM1885C2A6R0BA01# Part number # indicates the package specification code. 49 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.6×0.8mm) T max. For General Purpose GRM Series Rated TC Voltage Code Cap. 0.9mm 100Vdc C0G 6.0pF 6.1pF Tol. Part Number ±0.25pF GRM1885C2A6R0CA01# T max. Rated TC Voltage Code Cap. 0.9mm 100Vdc C0G 7.4pF ±0.1pF GRM1885C2A7R4BA01# ±0.25pF GRM1885C2A7R4CA01# ±0.5pF GRM1885C2A7R4DA01# 7.5pF ±0.5pF GRM1885C2A6R1DA01# ±0.1pF GRM1885C2A7R5BA01# ±0.25pF GRM1885C2A7R5CA01# ±0.1pF GRM1885C2A6R2BA01# ±0.5pF GRM1885C2A7R5DA01# Capacitor Array GNM Series 7.6pF ±0.1pF GRM1885C2A7R6BA01# ±0.05pF GRM1885C2A6R3WA01# ±0.25pF GRM1885C2A7R6CA01# ±0.25pF GRM1885C2A6R3CA01# ±0.5pF GRM1885C2A7R6DA01# 7.7pF Low ESL LLp Series ±0.5pF GRM1885C2A6R3DA01# ±0.1pF GRM1885C2A7R7BA01# ±0.25pF GRM1885C2A7R7CA01# ±0.1pF GRM1885C2A6R4BA01# ±0.5pF GRM1885C2A7R7DA01# 7.8pF ±0.1pF GRM1885C2A7R8BA01# ±0.05pF GRM1885C2A6R5WA01# ±0.25pF GRM1885C2A7R8CA01# ±0.1pF GRM1885C2A6R5BA01# ±0.5pF GRM1885C2A7R8DA01# 7.9pF High-Q Type GJM Series ±0.5pF GRM1885C2A6R5DA01# ±0.1pF GRM1885C2A7R9BA01# ±0.25pF GRM1885C2A7R9CA01# ±0.1pF GRM1885C2A6R6BA01# ±0.5pF GRM1885C2A7R9DA01# 8.0pF ±0.1pF GRM1885C2A8R0BA01# ±0.05pF GRM1885C2A6R7WA01# ±0.25pF GRM1885C2A8R0CA01# High Frequency GQM Series ±0.25pF GRM1885C2A6R7CA01# ±0.5pF GRM1885C2A8R0DA01# 8.1pF ±0.5pF GRM1885C2A6R7DA01# ±0.1pF GRM1885C2A8R1BA01# ±0.25pF GRM1885C2A8R1CA01# ±0.1pF GRM1885C2A6R8BA01# ±0.5pF GRM1885C2A8R1DA01# 8.2pF Monolithic Microchip GMA Series ±0.5pF GRM1885C2A6R8DA01# ±0.1pF GRM1885C2A8R2BA01# ±0.25pF GRM1885C2A8R2CA01# ±0.1pF GRM1885C2A6R9BA01# ±0.5pF GRM1885C2A8R2DA01# 8.3pF ±0.5pF GRM1885C2A6R9DA01# ±0.1pF GRM1885C2A8R3BA01# ±0.25pF GRM1885C2A8R3CA01# ±0.1pF GRM1885C2A7R0BA01# ±0.5pF GRM1885C2A8R3DA01# 8.4pF ±0.05pF GRM1885C2A8R4WA01# For Bonding GMD Series ±0.5pF GRM1885C2A7R0DA01# ±0.1pF GRM1885C2A8R4BA01# ±0.05pF GRM1885C2A7R1WA01# ±0.25pF GRM1885C2A8R4CA01# ±0.1pF GRM1885C2A7R1BA01# ±0.25pF GRM1885C2A7R1CA01# ±0.5pF GRM1885C2A8R4DA01# 8.5pF ±0.05pF GRM1885C2A8R5WA01# ±0.5pF GRM1885C2A7R1DA01# ±0.1pF GRM1885C2A8R5BA01# ±0.05pF GRM1885C2A7R2WA01# ±0.25pF GRM1885C2A8R5CA01# ±0.1pF GRM1885C2A7R2BA01# Product Information ±0.25pF GRM1885C2A7R2CA01# 7.3pF ±0.05pF GRM1885C2A8R3WA01# ±0.05pF GRM1885C2A7R0WA01# ±0.25pF GRM1885C2A7R0CA01# 7.2pF ±0.05pF GRM1885C2A8R2WA01# ±0.05pF GRM1885C2A6R9WA01# ±0.25pF GRM1885C2A6R9CA01# 7.1pF ±0.05pF GRM1885C2A8R1WA01# ±0.05pF GRM1885C2A6R8WA01# ±0.25pF GRM1885C2A6R8CA01# 7.0pF ±0.05pF GRM1885C2A8R0WA01# ±0.5pF GRM1885C2A6R6DA01# ±0.1pF GRM1885C2A6R7BA01# 6.9pF ±0.05pF GRM1885C2A7R9WA01# ±0.05pF GRM1885C2A6R6WA01# ±0.25pF GRM1885C2A6R6CA01# 6.8pF ±0.05pF GRM1885C2A7R8WA01# ±0.5pF GRM1885C2A6R4DA01# ±0.25pF GRM1885C2A6R5CA01# 6.7pF ±0.05pF GRM1885C2A7R7WA01# ±0.05pF GRM1885C2A6R4WA01# ±0.25pF GRM1885C2A6R4CA01# 6.6pF ±0.05pF GRM1885C2A7R6WA01# ±0.5pF GRM1885C2A6R2DA01# ±0.1pF GRM1885C2A6R3BA01# 6.5pF ±0.05pF GRM1885C2A7R5WA01# ±0.05pF GRM1885C2A6R2WA01# ±0.25pF GRM1885C2A6R2CA01# 6.4pF ±0.05pF GRM1885C2A7R4WA01# ±0.05pF GRM1885C2A6R1WA01# ±0.1pF GRM1885C2A6R1BA01# 6.3pF Part Number ±0.5pF GRM1885C2A6R0DA01# ±0.25pF GRM1885C2A6R1CA01# 6.2pF Tol. ±0.5pF GRM1885C2A8R5DA01# 8.6pF ±0.05pF GRM1885C2A8R6WA01# ±0.5pF GRM1885C2A7R2DA01# ±0.1pF GRM1885C2A8R6BA01# ±0.05pF GRM1885C2A7R3WA01# ±0.25pF GRM1885C2A8R6CA01# ±0.5pF GRM1885C2A8R6DA01# ±0.1pF GRM1885C2A7R3BA01# ±0.25pF GRM1885C2A7R3CA01# ±0.5pF GRM1885C2A7R3DA01# 8.7pF ±0.05pF GRM1885C2A8R7WA01# ±0.1pF GRM1885C2A8R7BA01# Part number # indicates the package specification code. 50 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.6×0.8mm) 9.0pF 9.1pF 9.2pF 9.3pF Tol. 0.9mm 100Vdc C0G 22pF ±5% GRM1885C2A220JA01# ±0.5pF GRM1885C2A8R7DA01# 27pF ±5% GRM1885C2A270JA01# ±0.05pF GRM1885C2A8R8WA01# 33pF ±5% GRM1885C2A330JA01# ±0.1pF GRM1885C2A8R8BA01# 39pF ±5% GRM1885C2A390JA01# ±0.25pF GRM1885C2A8R8CA01# 47pF ±5% GRM1885C2A470JA01# ±0.5pF GRM1885C2A8R8DA01# 56pF ±5% GRM1885C2A560JA01# ±0.05pF GRM1885C2A8R9WA01# 68pF ±5% GRM1885C2A680JA01# ±0.1pF GRM1885C2A8R9BA01# 82pF ±5% GRM1885C2A820JA01# ±0.25pF GRM1885C2A8R9CA01# 100pF ±5% GRM1885C2A101JA01# ±0.5pF GRM1885C2A8R9DA01# 120pF ±5% GRM1885C2A121JA01# ±0.05pF GRM1885C2A9R0WA01# 150pF ±5% GRM1885C2A151JA01# ±0.1pF GRM1885C2A9R0BA01# 180pF ±5% GRM1885C2A181JA01# ±0.25pF GRM1885C2A9R0CA01# 220pF ±5% GRM1885C2A221JA01# ±0.5pF GRM1885C2A9R0DA01# 270pF ±5% GRM1885C2A271JA01# ±0.05pF GRM1885C2A9R1WA01# 330pF ±5% GRM1885C2A331JA01# ±0.1pF GRM1885C2A9R1BA01# 390pF ±5% GRM1885C2A391JA01# ±0.25pF GRM1885C2A9R1CA01# 470pF ±5% GRM1885C2A471JA01# ±0.5pF GRM1885C2A9R1DA01# 560pF ±5% GRM1885C2A561JA01# ±0.05pF GRM1885C2A9R2WA01# 680pF ±5% GRM1885C2A681JA01# ±0.1pF GRM1885C2A9R2BA01# 820pF ±5% GRM1885C2A821JA01# ±0.25pF GRM1885C2A9R2CA01# 1000pF ±5% GRM1885C2A102JA01# ±0.5pF GRM1885C2A9R2DA01# 1200pF ±5% GRM1885C2A122JA01# ±0.05pF GRM1885C2A9R3WA01# 1500pF ±5% GRM1885C2A152JA01# ±0.1pF GRM1885C2A9R3BA01# CK 0.5pF ±0.05pF GRM1884C2AR50WA01# 0.6pF ±0.05pF GRM1884C2AR60WA01# 0.7pF ±0.05pF GRM1884C2AR70WA01# 0.8pF ±0.05pF GRM1884C2AR80WA01# ±0.25pF GRM1885C2A9R3CA01# ±0.5pF GRM1885C2A9R3DA01# 9.4pF ±0.1pF GRM1884C2AR50BA01# ±0.05pF GRM1885C2A9R4WA01# ±0.1pF GRM1885C2A9R4BA01# ±0.1pF GRM1884C2AR60BA01# ±0.25pF GRM1885C2A9R4CA01# ±0.5pF GRM1885C2A9R4DA01# 9.5pF ±0.1pF GRM1884C2AR70BA01# ±0.05pF GRM1885C2A9R5WA01# ±0.1pF GRM1885C2A9R5BA01# ±0.1pF GRM1884C2AR80BA01# 0.9pF ±0.05pF GRM1884C2AR90WA01# 1.0pF ±0.05pF GRM1884C2A1R0WA01# ±0.25pF GRM1885C2A9R5CA01# ±0.5pF GRM1885C2A9R5DA01# 9.6pF ±0.1pF GRM1884C2A1R0BA01# ±0.1pF GRM1885C2A9R6BA01# ±0.25pF GRM1884C2A1R0CA01# ±0.05pF GRM1884C2A1R1WA01# ±0.5pF GRM1885C2A9R6DA01# ±0.1pF GRM1884C2A1R1BA01# ±0.25pF GRM1884C2A1R1CA01# 1.2pF ±0.05pF GRM1884C2A1R2WA01# ±0.25pF GRM1885C2A9R7CA01# ±0.1pF GRM1884C2A1R2BA01# ±0.5pF GRM1885C2A9R7DA01# ±0.25pF GRM1884C2A1R2CA01# ±0.05pF GRM1885C2A9R8WA01# 1.3pF ±0.05pF GRM1884C2A1R3WA01# ±0.1pF GRM1885C2A9R8BA01# ±0.1pF GRM1884C2A1R3BA01# ±0.25pF GRM1885C2A9R8CA01# ±0.25pF GRM1884C2A1R3CA01# ±0.5pF GRM1885C2A9R8DA01# 9.9pF 1.1pF ±0.05pF GRM1885C2A9R7WA01# ±0.1pF GRM1885C2A9R7BA01# 9.8pF ±0.1pF GRM1884C2AR90BA01# ±0.05pF GRM1885C2A9R6WA01# ±0.25pF GRM1885C2A9R6CA01# 9.7pF Part Number 1.4pF ±0.05pF GRM1885C2A9R9WA01# ±0.25pF GRM1884C2A1R4CA01# 1.5pF ±5% GRM1885C2A100JA01# 12pF ±5% GRM1885C2A120JA01# 15pF ±5% GRM1885C2A150JA01# 18pF ±5% GRM1885C2A180JA01# ±0.05pF GRM1884C2A1R5WA01# ±0.1pF GRM1884C2A1R5BA01# ±0.5pF GRM1885C2A9R9DA01# 10pF ±0.05pF GRM1884C2A1R4WA01# ±0.1pF GRM1884C2A1R4BA01# ±0.1pF GRM1885C2A9R9BA01# ±0.25pF GRM1885C2A9R9CA01# For General Purpose GRM Series Cap. Capacitor Array GNM Series 8.9pF Rated TC Voltage Code Low ESL LLp Series 8.8pF ±0.25pF GRM1885C2A8R7CA01# T max. High-Q Type GJM Series 8.7pF Part Number High Frequency GQM Series 0.9mm 100Vdc C0G Tol. Monolithic Microchip GMA Series Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. ±0.25pF GRM1884C2A1R5CA01# 1.6pF ±0.05pF GRM1884C2A1R6WA01# ±0.1pF GRM1884C2A1R6BA01# ±0.25pF GRM1884C2A1R6CA01# Part number # indicates the package specification code. 51 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.6×0.8mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.9mm 100Vdc CK Cap. 1.7pF 1.8pF Tol. Part Number ±0.05pF GRM1884C2A1R7WA01# T max. Rated TC Voltage Code 0.9mm 100Vdc CJ Cap. 3.5pF Capacitor Array GNM Series CJ 2.1pF Low ESL LLp Series 2.2pF 2.3pF 2.4pF High-Q Type GJM Series 2.5pF ±0.1pF GRM1883C2A3R5BA01# ±0.25pF GRM1883C2A3R5CA01# ±0.05pF GRM1884C2A1R8WA01# 3.6pF ±0.25pF GRM1883C2A3R6CA01# ±0.05pF GRM1884C2A1R9WA01# 3.7pF High Frequency GQM Series 2.8pF Monolithic Microchip GMA Series 2.9pF 3.0pF For Bonding GMD Series 3.1pF 3.2pF ±0.1pF GRM1884C2A1R9BA01# ±0.1pF GRM1883C2A3R7BA01# ±0.25pF GRM1883C2A3R7CA01# ±0.05pF GRM1884C2A2R0WA01# 3.8pF ±0.1pF GRM1884C2A2R0BA01# ±0.1pF GRM1883C2A3R8BA01# ±0.25pF GRM1883C2A3R8CA01# ±0.05pF GRM1883C2A2R1WA01# 3.9pF ±0.05pF GRM1883C2A3R9WA01# ±0.1pF GRM1883C2A2R1BA01# ±0.1pF GRM1883C2A3R9BA01# ±0.25pF GRM1883C2A2R1CA01# ±0.25pF GRM1883C2A3R9CA01# ±0.05pF GRM1883C2A2R2WA01# CH 4.0pF ±0.05pF GRM1882C2A4R0WA01# ±0.1pF GRM1883C2A2R2BA01# ±0.1pF GRM1882C2A4R0BA01# ±0.25pF GRM1883C2A2R2CA01# ±0.25pF GRM1882C2A4R0CA01# ±0.05pF GRM1883C2A2R3WA01# 4.1pF ±0.05pF GRM1882C2A4R1WA01# ±0.1pF GRM1883C2A2R3BA01# ±0.1pF GRM1882C2A4R1BA01# ±0.25pF GRM1883C2A2R3CA01# ±0.25pF GRM1882C2A4R1CA01# ±0.05pF GRM1883C2A2R4WA01# 4.2pF ±0.05pF GRM1882C2A4R2WA01# ±0.1pF GRM1883C2A2R4BA01# ±0.1pF GRM1882C2A4R2BA01# ±0.25pF GRM1883C2A2R4CA01# ±0.25pF GRM1882C2A4R2CA01# ±0.05pF GRM1883C2A2R5WA01# 4.3pF ±0.05pF GRM1883C2A2R6WA01# ±0.05pF GRM1882C2A4R3WA01# ±0.1pF GRM1882C2A4R3BA01# ±0.25pF GRM1882C2A4R3CA01# 4.4pF ±0.05pF GRM1882C2A4R4WA01# ±0.1pF GRM1883C2A2R6BA01# ±0.1pF GRM1882C2A4R4BA01# ±0.25pF GRM1883C2A2R6CA01# ±0.25pF GRM1882C2A4R4CA01# ±0.05pF GRM1883C2A2R7WA01# 4.5pF ±0.05pF GRM1882C2A4R5WA01# ±0.1pF GRM1883C2A2R7BA01# ±0.1pF GRM1882C2A4R5BA01# ±0.25pF GRM1883C2A2R7CA01# ±0.25pF GRM1882C2A4R5CA01# ±0.05pF GRM1883C2A2R8WA01# 4.6pF ±0.05pF GRM1882C2A4R6WA01# ±0.1pF GRM1883C2A2R8BA01# ±0.1pF GRM1882C2A4R6BA01# ±0.25pF GRM1883C2A2R8CA01# ±0.25pF GRM1882C2A4R6CA01# ±0.05pF GRM1883C2A2R9WA01# 4.7pF ±0.05pF GRM1882C2A4R7WA01# ±0.1pF GRM1883C2A2R9BA01# ±0.1pF GRM1882C2A4R7BA01# ±0.25pF GRM1883C2A2R9CA01# ±0.25pF GRM1882C2A4R7CA01# ±0.05pF GRM1883C2A3R0WA01# 4.8pF ±0.05pF GRM1882C2A4R8WA01# ±0.1pF GRM1883C2A3R0BA01# ±0.1pF GRM1882C2A4R8BA01# ±0.25pF GRM1883C2A3R0CA01# ±0.25pF GRM1882C2A4R8CA01# ±0.05pF GRM1883C2A3R1WA01# 4.9pF ±0.05pF GRM1882C2A4R9WA01# ±0.1pF GRM1883C2A3R1BA01# ±0.1pF GRM1882C2A4R9BA01# ±0.25pF GRM1883C2A3R1CA01# ±0.25pF GRM1882C2A4R9CA01# ±0.05pF GRM1883C2A3R2WA01# 5.0pF Product Information ±0.05pF GRM1883C2A3R3WA01# ±0.05pF GRM1882C2A5R0WA01# ±0.1pF GRM1882C2A5R0BA01# ±0.25pF GRM1883C2A3R2CA01# 3.4pF ±0.05pF GRM1883C2A3R8WA01# ±0.25pF GRM1884C2A2R0CA01# ±0.1pF GRM1883C2A3R2BA01# 3.3pF ±0.05pF GRM1883C2A3R7WA01# ±0.25pF GRM1884C2A1R9CA01# ±0.25pF GRM1883C2A2R5CA01# 2.7pF ±0.05pF GRM1883C2A3R6WA01# ±0.1pF GRM1883C2A3R6BA01# ±0.1pF GRM1883C2A2R5BA01# 2.6pF ±0.05pF GRM1883C2A3R5WA01# ±0.25pF GRM1884C2A1R7CA01# ±0.25pF GRM1884C2A1R8CA01# 2.0pF Part Number ±0.1pF GRM1884C2A1R7BA01# ±0.1pF GRM1884C2A1R8BA01# 1.9pF Tol. ±0.25pF GRM1882C2A5R0CA01# 5.1pF ±0.05pF GRM1882C2A5R1WA01# ±0.1pF GRM1883C2A3R3BA01# ±0.1pF GRM1882C2A5R1BA01# ±0.25pF GRM1883C2A3R3CA01# ±0.25pF GRM1882C2A5R1CA01# ±0.05pF GRM1883C2A3R4WA01# ±0.1pF GRM1883C2A3R4BA01# ±0.25pF GRM1883C2A3R4CA01# ±0.5pF GRM1882C2A5R1DA01# 5.2pF ±0.05pF GRM1882C2A5R2WA01# ±0.1pF GRM1882C2A5R2BA01# Part number # indicates the package specification code. 52 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.6×0.8mm) CH 6.6pF ±0.1pF GRM1882C2A6R6BA01# ±0.25pF GRM1882C2A6R6CA01# ±0.5pF GRM1882C2A6R6DA01# 6.7pF ±0.5pF GRM1882C2A5R3DA01# ±0.1pF GRM1882C2A6R7BA01# ±0.25pF GRM1882C2A6R7CA01# ±0.1pF GRM1882C2A5R4BA01# ±0.5pF GRM1882C2A6R7DA01# 6.8pF ±0.1pF GRM1882C2A6R8BA01# ±0.05pF GRM1882C2A5R5WA01# ±0.25pF GRM1882C2A6R8CA01# ±0.25pF GRM1882C2A5R5CA01# ±0.5pF GRM1882C2A6R8DA01# 6.9pF ±0.5pF GRM1882C2A5R5DA01# ±0.1pF GRM1882C2A6R9BA01# ±0.25pF GRM1882C2A6R9CA01# ±0.1pF GRM1882C2A5R6BA01# ±0.5pF GRM1882C2A6R9DA01# 7.0pF ±0.1pF GRM1882C2A7R0BA01# ±0.05pF GRM1882C2A5R7WA01# ±0.25pF GRM1882C2A7R0CA01# ±0.1pF GRM1882C2A5R7BA01# ±0.5pF GRM1882C2A7R0DA01# 7.1pF ±0.5pF GRM1882C2A5R7DA01# ±0.1pF GRM1882C2A7R1BA01# ±0.25pF GRM1882C2A7R1CA01# ±0.1pF GRM1882C2A5R8BA01# ±0.5pF GRM1882C2A7R1DA01# 7.2pF ±0.1pF GRM1882C2A7R2BA01# ±0.05pF GRM1882C2A5R9WA01# ±0.25pF GRM1882C2A7R2CA01# ±0.25pF GRM1882C2A5R9CA01# ±0.5pF GRM1882C2A7R2DA01# 7.3pF ±0.5pF GRM1882C2A5R9DA01# ±0.1pF GRM1882C2A7R3BA01# ±0.25pF GRM1882C2A7R3CA01# ±0.1pF GRM1882C2A6R0BA01# ±0.5pF GRM1882C2A7R3DA01# 7.4pF ±0.5pF GRM1882C2A6R0DA01# ±0.1pF GRM1882C2A7R4BA01# ±0.25pF GRM1882C2A7R4CA01# ±0.1pF GRM1882C2A6R1BA01# ±0.5pF GRM1882C2A7R4DA01# 7.5pF ±0.5pF GRM1882C2A6R1DA01# ±0.1pF GRM1882C2A7R5BA01# ±0.25pF GRM1882C2A7R5CA01# ±0.1pF GRM1882C2A6R2BA01# ±0.5pF GRM1882C2A7R5DA01# 7.6pF ±0.05pF GRM1882C2A7R6WA01# ±0.5pF GRM1882C2A6R2DA01# ±0.1pF GRM1882C2A7R6BA01# ±0.05pF GRM1882C2A6R3WA01# ±0.25pF GRM1882C2A7R6CA01# ±0.1pF GRM1882C2A6R3BA01# ±0.25pF GRM1882C2A6R3CA01# ±0.5pF GRM1882C2A7R6DA01# 7.7pF ±0.05pF GRM1882C2A7R7WA01# ±0.5pF GRM1882C2A6R3DA01# ±0.1pF GRM1882C2A7R7BA01# ±0.05pF GRM1882C2A6R4WA01# ±0.25pF GRM1882C2A7R7CA01# ±0.1pF GRM1882C2A6R4BA01# ±0.25pF GRM1882C2A6R4CA01# 6.5pF ±0.05pF GRM1882C2A7R5WA01# ±0.05pF GRM1882C2A6R2WA01# ±0.25pF GRM1882C2A6R2CA01# 6.4pF ±0.05pF GRM1882C2A7R4WA01# ±0.05pF GRM1882C2A6R1WA01# ±0.25pF GRM1882C2A6R1CA01# 6.3pF ±0.05pF GRM1882C2A7R3WA01# ±0.05pF GRM1882C2A6R0WA01# ±0.25pF GRM1882C2A6R0CA01# 6.2pF ±0.05pF GRM1882C2A7R2WA01# ±0.5pF GRM1882C2A5R8DA01# ±0.1pF GRM1882C2A5R9BA01# 6.1pF ±0.05pF GRM1882C2A7R1WA01# ±0.05pF GRM1882C2A5R8WA01# ±0.25pF GRM1882C2A5R8CA01# 6.0pF ±0.05pF GRM1882C2A7R0WA01# ±0.5pF GRM1882C2A5R6DA01# ±0.25pF GRM1882C2A5R7CA01# 5.9pF ±0.05pF GRM1882C2A6R9WA01# ±0.05pF GRM1882C2A5R6WA01# ±0.25pF GRM1882C2A5R6CA01# 5.8pF ±0.05pF GRM1882C2A6R8WA01# ±0.5pF GRM1882C2A5R4DA01# ±0.1pF GRM1882C2A5R5BA01# 5.7pF ±0.05pF GRM1882C2A6R7WA01# ±0.05pF GRM1882C2A5R4WA01# ±0.25pF GRM1882C2A5R4CA01# 5.6pF ±0.05pF GRM1882C2A6R6WA01# ±0.05pF GRM1882C2A5R3WA01# ±0.1pF GRM1882C2A5R3BA01# 5.5pF Part Number ±0.5pF GRM1882C2A5R2DA01# ±0.25pF GRM1882C2A5R3CA01# 5.4pF Tol. ±0.5pF GRM1882C2A7R7DA01# 7.8pF ±0.05pF GRM1882C2A7R8WA01# ±0.5pF GRM1882C2A6R4DA01# ±0.1pF GRM1882C2A7R8BA01# ±0.05pF GRM1882C2A6R5WA01# ±0.25pF GRM1882C2A7R8CA01# ±0.5pF GRM1882C2A7R8DA01# ±0.1pF GRM1882C2A6R5BA01# ±0.25pF GRM1882C2A6R5CA01# ±0.5pF GRM1882C2A6R5DA01# For General Purpose GRM Series 0.9mm 100Vdc Cap. Capacitor Array GNM Series Rated TC Voltage Code Low ESL LLp Series 5.3pF ±0.25pF GRM1882C2A5R2CA01# T max. High-Q Type GJM Series 5.2pF Part Number High Frequency GQM Series CH Tol. Monolithic Microchip GMA Series 0.9mm 100Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. 7.9pF ±0.05pF GRM1882C2A7R9WA01# ±0.1pF GRM1882C2A7R9BA01# Part number # indicates the package specification code. 53 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.6×0.8mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.9mm 100Vdc CH Cap. 7.9pF 8.0pF Tol. Part Number ±0.25pF GRM1882C2A7R9CA01# T max. Rated TC Voltage Code 0.9mm 100Vdc CH Cap. 9.3pF ±0.1pF GRM1882C2A9R3BA01# ±0.25pF GRM1882C2A9R3CA01# ±0.5pF GRM1882C2A9R3DA01# 9.4pF ±0.5pF GRM1882C2A8R0DA01# ±0.1pF GRM1882C2A9R4BA01# ±0.25pF GRM1882C2A9R4CA01# ±0.1pF GRM1882C2A8R1BA01# ±0.5pF GRM1882C2A9R4DA01# Capacitor Array GNM Series 9.5pF ±0.1pF GRM1882C2A9R5BA01# ±0.05pF GRM1882C2A8R2WA01# ±0.25pF GRM1882C2A9R5CA01# ±0.25pF GRM1882C2A8R2CA01# ±0.5pF GRM1882C2A9R5DA01# 9.6pF Low ESL LLp Series ±0.5pF GRM1882C2A8R2DA01# ±0.1pF GRM1882C2A9R6BA01# ±0.25pF GRM1882C2A9R6CA01# ±0.1pF GRM1882C2A8R3BA01# ±0.5pF GRM1882C2A9R6DA01# 9.7pF ±0.1pF GRM1882C2A9R7BA01# ±0.05pF GRM1882C2A8R4WA01# ±0.25pF GRM1882C2A9R7CA01# ±0.1pF GRM1882C2A8R4BA01# ±0.5pF GRM1882C2A9R7DA01# 9.8pF High-Q Type GJM Series ±0.5pF GRM1882C2A8R4DA01# ±0.1pF GRM1882C2A9R8BA01# ±0.25pF GRM1882C2A9R8CA01# ±0.1pF GRM1882C2A8R5BA01# ±0.5pF GRM1882C2A9R8DA01# 9.9pF High Frequency GQM Series Monolithic Microchip GMA Series 8.9pF For Bonding GMD Series 9.0pF 9.1pF Product Information 9.2pF ±0.05pF GRM1882C2A9R9WA01# ±0.5pF GRM1882C2A8R5DA01# ±0.1pF GRM1882C2A9R9BA01# ±0.05pF GRM1882C2A8R6WA01# ±0.25pF GRM1882C2A9R9CA01# ±0.1pF GRM1882C2A8R6BA01# 8.8pF ±0.05pF GRM1882C2A9R8WA01# ±0.05pF GRM1882C2A8R5WA01# ±0.25pF GRM1882C2A8R5CA01# 8.7pF ±0.05pF GRM1882C2A9R7WA01# ±0.5pF GRM1882C2A8R3DA01# ±0.25pF GRM1882C2A8R4CA01# 8.6pF ±0.05pF GRM1882C2A9R6WA01# ±0.05pF GRM1882C2A8R3WA01# ±0.25pF GRM1882C2A8R3CA01# 8.5pF ±0.05pF GRM1882C2A9R5WA01# ±0.5pF GRM1882C2A8R1DA01# ±0.1pF GRM1882C2A8R2BA01# 8.4pF ±0.05pF GRM1882C2A9R4WA01# ±0.05pF GRM1882C2A8R1WA01# ±0.25pF GRM1882C2A8R1CA01# 8.3pF ±0.05pF GRM1882C2A9R3WA01# ±0.05pF GRM1882C2A8R0WA01# ±0.1pF GRM1882C2A8R0BA01# 8.2pF Part Number ±0.5pF GRM1882C2A7R9DA01# ±0.25pF GRM1882C2A8R0CA01# 8.1pF Tol. ±0.5pF GRM1882C2A9R9DA01# ±0.25pF GRM1882C2A8R6CA01# 10pF ±5% GRM1882C2A100JA01# ±0.5pF GRM1882C2A8R6DA01# 12pF ±5% GRM1882C2A120JA01# ±0.05pF GRM1882C2A8R7WA01# 15pF ±5% GRM1882C2A150JA01# ±0.1pF GRM1882C2A8R7BA01# 18pF ±5% GRM1882C2A180JA01# ±0.25pF GRM1882C2A8R7CA01# 22pF ±5% GRM1882C2A220JA01# ±0.5pF GRM1882C2A8R7DA01# 27pF ±5% GRM1882C2A270JA01# ±0.05pF GRM1882C2A8R8WA01# 33pF ±5% GRM1882C2A330JA01# ±0.1pF GRM1882C2A8R8BA01# 39pF ±5% GRM1882C2A390JA01# ±0.25pF GRM1882C2A8R8CA01# 47pF ±5% GRM1882C2A470JA01# ±0.5pF GRM1882C2A8R8DA01# 56pF ±5% GRM1882C2A560JA01# ±0.05pF GRM1882C2A8R9WA01# 68pF ±5% GRM1882C2A680JA01# ±0.1pF GRM1882C2A8R9BA01# 82pF ±5% GRM1882C2A820JA01# ±0.25pF GRM1882C2A8R9CA01# 100pF ±5% GRM1882C2A101JA01# ±0.5pF GRM1882C2A8R9DA01# 120pF ±5% GRM1882C2A121JA01# ±0.05pF GRM1882C2A9R0WA01# 150pF ±5% GRM1882C2A151JA01# ±0.1pF GRM1882C2A9R0BA01# 180pF ±5% GRM1882C2A181JA01# ±0.25pF GRM1882C2A9R0CA01# 220pF ±5% GRM1882C2A221JA01# ±0.5pF GRM1882C2A9R0DA01# 270pF ±5% GRM1882C2A271JA01# ±0.05pF GRM1882C2A9R1WA01# 330pF ±5% GRM1882C2A331JA01# ±0.1pF GRM1882C2A9R1BA01# 390pF ±5% GRM1882C2A391JA01# ±0.25pF GRM1882C2A9R1CA01# 470pF ±5% GRM1882C2A471JA01# ±0.5pF GRM1882C2A9R1DA01# 560pF ±5% GRM1882C2A561JA01# ±0.05pF GRM1882C2A9R2WA01# 680pF ±5% GRM1882C2A681JA01# ±0.1pF GRM1882C2A9R2BA01# 820pF ±5% GRM1882C2A821JA01# ±0.25pF GRM1882C2A9R2CA01# 1000pF ±5% GRM1882C2A102JA01# ±0.5pF GRM1882C2A9R2DA01# 1200pF ±5% GRM1882C2A122JA01# Part number # indicates the package specification code. 54 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.6×0.8mm) ±0.1pF GRM1885C1H2R4BA01# 0.5pF ±0.05pF GRM1885C1HR50WA01# 0.6pF ±0.05pF GRM1885C1HR60WA01# ±0.1pF GRM1885C1H2R5BA01# ±0.1pF GRM1885C1HR60BA01# ±0.25pF GRM1885C1H2R5CA01# ±0.25pF GRM1885C1H2R4CA01# 2.6pF ±0.05pF GRM1885C1H2R5WA01# ±0.05pF GRM1885C1H2R6WA01# ±0.1pF GRM1885C1H2R6BA01# 0.8pF ±0.05pF GRM1885C1HR80WA01# ±0.25pF GRM1885C1H2R6CA01# 0.9pF ±0.05pF GRM1885C1HR90WA01# 1.0pF ±0.05pF GRM1885C1H1R0WA01# 2.7pF ±0.25pF GRM1885C1H2R7CA01# 2.8pF ±0.1pF GRM1885C1H1R0BA01# ±0.1pF GRM1885C1H2R8BA01# ±0.25pF GRM1885C1H2R8CA01# ±0.05pF GRM1885C1H1R1WA01# 2.9pF 1.4pF 1.5pF 1.6pF ±0.05pF GRM1885C1H1R2WA01# ±0.25pF GRM1885C1H2R9CA01# 3.0pF ±0.1pF GRM1885C1H1R2BA01# ±0.1pF GRM1885C1H3R0BA01# ±0.25pF GRM1885C1H3R0CA01# ±0.05pF GRM1885C1H1R3WA01# 3.1pF ±0.1pF GRM1885C1H1R3BA01# ±0.1pF GRM1885C1H3R1BA01# ±0.25pF GRM1885C1H3R1CA01# ±0.05pF GRM1885C1H1R4WA01# 3.2pF ±0.1pF GRM1885C1H3R2BA01# ±0.25pF GRM1885C1H1R4CA01# ±0.25pF GRM1885C1H3R2CA01# ±0.05pF GRM1885C1H1R5WA01# 3.3pF 2.1pF 2.2pF 2.3pF 2.4pF ±0.05pF GRM1885C1H3R3WA01# ±0.1pF GRM1885C1H1R5BA01# ±0.1pF GRM1885C1H3R3BA01# ±0.25pF GRM1885C1H1R5CA01# ±0.25pF GRM1885C1H3R3CA01# ±0.05pF GRM1885C1H1R6WA01# 3.4pF ±0.05pF GRM1885C1H1R7WA01# ±0.05pF GRM1885C1H3R4WA01# ±0.1pF GRM1885C1H3R4BA01# ±0.25pF GRM1885C1H3R4CA01# 3.5pF ±0.05pF GRM1885C1H3R5WA01# ±0.1pF GRM1885C1H1R7BA01# ±0.1pF GRM1885C1H3R5BA01# ±0.25pF GRM1885C1H1R7CA01# ±0.25pF GRM1885C1H3R5CA01# ±0.05pF GRM1885C1H1R8WA01# 3.6pF ±0.05pF GRM1885C1H1R9WA01# ±0.05pF GRM1885C1H3R6WA01# ±0.1pF GRM1885C1H3R6BA01# ±0.25pF GRM1885C1H1R8CA01# 2.0pF ±0.05pF GRM1885C1H3R2WA01# ±0.1pF GRM1885C1H1R4BA01# ±0.1pF GRM1885C1H1R8BA01# 1.9pF ±0.05pF GRM1885C1H3R1WA01# ±0.25pF GRM1885C1H1R3CA01# ±0.25pF GRM1885C1H1R6CA01# 1.8pF ±0.05pF GRM1885C1H3R0WA01# ±0.25pF GRM1885C1H1R2CA01# ±0.1pF GRM1885C1H1R6BA01# 1.7pF ±0.05pF GRM1885C1H2R9WA01# ±0.1pF GRM1885C1H2R9BA01# ±0.25pF GRM1885C1H1R1CA01# 1.3pF ±0.05pF GRM1885C1H2R8WA01# ±0.25pF GRM1885C1H1R0CA01# ±0.1pF GRM1885C1H1R1BA01# 1.2pF ±0.05pF GRM1885C1H2R7WA01# ±0.1pF GRM1885C1H2R7BA01# ±0.1pF GRM1885C1HR90BA01# 1.1pF ±0.25pF GRM1885C1H3R6CA01# 3.7pF ±0.05pF GRM1885C1H3R7WA01# ±0.1pF GRM1885C1H1R9BA01# ±0.1pF GRM1885C1H3R7BA01# ±0.25pF GRM1885C1H1R9CA01# ±0.25pF GRM1885C1H3R7CA01# ±0.05pF GRM1885C1H2R0WA01# 3.8pF ±0.05pF GRM1885C1H3R8WA01# ±0.1pF GRM1885C1H2R0BA01# ±0.1pF GRM1885C1H3R8BA01# ±0.25pF GRM1885C1H2R0CA01# ±0.25pF GRM1885C1H3R8CA01# ±0.05pF GRM1885C1H2R1WA01# 3.9pF ±0.05pF GRM1885C1H3R9WA01# ±0.1pF GRM1885C1H2R1BA01# ±0.1pF GRM1885C1H3R9BA01# ±0.25pF GRM1885C1H2R1CA01# ±0.25pF GRM1885C1H3R9CA01# ±0.05pF GRM1885C1H2R2WA01# 4.0pF ±0.05pF GRM1885C1H4R0WA01# ±0.1pF GRM1885C1H2R2BA01# ±0.1pF GRM1885C1H4R0BA01# ±0.25pF GRM1885C1H2R2CA01# ±0.25pF GRM1885C1H4R0CA01# ±0.05pF GRM1885C1H2R3WA01# 4.1pF ±0.05pF GRM1885C1H4R1WA01# ±0.1pF GRM1885C1H2R3BA01# ±0.1pF GRM1885C1H4R1BA01# ±0.25pF GRM1885C1H2R3CA01# ±0.25pF GRM1885C1H4R1CA01# ±0.05pF GRM1885C1H2R4WA01# Capacitor Array GNM Series 2.5pF ±0.1pF GRM1885C1HR70BA01# ±0.1pF GRM1885C1HR80BA01# For General Purpose GRM Series 2.4pF Part Number 1500pF ±0.05pF GRM1885C1HR70WA01# C0G Tol. CH 0.7pF 50Vdc Cap. C0G ±0.1pF GRM1885C1HR50BA01# 0.9mm Rated TC Voltage Code Low ESL LLp Series GRM1882C2A152JA01# T max. High-Q Type GJM Series ±5% Part Number High Frequency GQM Series 50Vdc Tol. Monolithic Microchip GMA Series 0.9mm 100Vdc Cap. 4.2pF For Bonding GMD Series Rated TC Voltage Code Product Information T max. ±0.05pF GRM1885C1H4R2WA01# Part number # indicates the package specification code. 55 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.6×0.8mm) T max. For General Purpose GRM Series 0.9mm Rated TC Voltage Code 50Vdc C0G Cap. 4.2pF 4.3pF Tol. Part Number ±0.1pF GRM1885C1H4R2BA01# T max. 0.9mm Rated TC Voltage Code 50Vdc C0G Cap. 5.8pF ±0.1pF GRM1885C1H5R8BA01# ±0.25pF GRM1885C1H5R8CA01# ±0.5pF GRM1885C1H5R8DA01# 5.9pF ±0.1pF GRM1885C1H5R9BA01# ±0.1pF GRM1885C1H4R4BA01# ±0.25pF GRM1885C1H5R9CA01# Capacitor Array GNM Series ±0.05pF GRM1885C1H4R5WA01# ±0.25pF GRM1885C1H4R5CA01# ±0.25pF GRM1885C1H6R0CA01# ±0.05pF GRM1885C1H4R6WA01# ±0.5pF GRM1885C1H6R0DA01# 6.1pF Low ESL LLp Series High-Q Type GJM Series 5.0pF ±0.25pF GRM1885C1H4R6CA01# ±0.1pF GRM1885C1H6R1BA01# ±0.25pF GRM1885C1H6R1CA01# ±0.1pF GRM1885C1H4R7BA01# ±0.5pF GRM1885C1H6R1DA01# 6.2pF ±0.1pF GRM1885C1H6R2BA01# ±0.1pF GRM1885C1H4R8BA01# ±0.25pF GRM1885C1H6R2CA01# ±0.05pF GRM1885C1H4R9WA01# ±0.5pF GRM1885C1H6R2DA01# 6.3pF ±0.1pF GRM1885C1H4R9BA01# ±0.1pF GRM1885C1H6R3BA01# ±0.25pF GRM1885C1H6R3CA01# ±0.05pF GRM1885C1H5R0WA01# ±0.5pF GRM1885C1H6R3DA01# 6.4pF ±0.1pF GRM1885C1H6R4BA01# ±0.05pF GRM1885C1H5R1WA01# ±0.25pF GRM1885C1H6R4CA01# ±0.5pF GRM1885C1H6R4DA01# High Frequency GQM Series 6.5pF ±0.5pF GRM1885C1H5R1DA01# ±0.1pF GRM1885C1H6R5BA01# ±0.25pF GRM1885C1H6R5CA01# ±0.1pF GRM1885C1H5R2BA01# ±0.5pF GRM1885C1H6R5DA01# 6.6pF Monolithic Microchip GMA Series ±0.5pF GRM1885C1H5R2DA01# ±0.1pF GRM1885C1H6R6BA01# ±0.25pF GRM1885C1H6R6CA01# ±0.1pF GRM1885C1H5R3BA01# ±0.5pF GRM1885C1H6R6DA01# 6.7pF ±0.5pF GRM1885C1H5R3DA01# ±0.1pF GRM1885C1H6R7BA01# ±0.25pF GRM1885C1H6R7CA01# ±0.1pF GRM1885C1H5R4BA01# ±0.5pF GRM1885C1H6R7DA01# 6.8pF ±0.05pF GRM1885C1H6R8WA01# For Bonding GMD Series ±0.5pF GRM1885C1H5R4DA01# ±0.1pF GRM1885C1H6R8BA01# ±0.05pF GRM1885C1H5R5WA01# ±0.25pF GRM1885C1H6R8CA01# ±0.1pF GRM1885C1H5R5BA01# ±0.25pF GRM1885C1H5R5CA01# ±0.5pF GRM1885C1H6R8DA01# 6.9pF ±0.05pF GRM1885C1H6R9WA01# ±0.5pF GRM1885C1H5R5DA01# ±0.1pF GRM1885C1H6R9BA01# ±0.05pF GRM1885C1H5R6WA01# ±0.25pF GRM1885C1H6R9CA01# ±0.1pF GRM1885C1H5R6BA01# Product Information ±0.25pF GRM1885C1H5R6CA01# 5.7pF ±0.05pF GRM1885C1H6R7WA01# ±0.05pF GRM1885C1H5R4WA01# ±0.25pF GRM1885C1H5R4CA01# 5.6pF ±0.05pF GRM1885C1H6R6WA01# ±0.05pF GRM1885C1H5R3WA01# ±0.25pF GRM1885C1H5R3CA01# 5.5pF ±0.05pF GRM1885C1H6R5WA01# ±0.05pF GRM1885C1H5R2WA01# ±0.25pF GRM1885C1H5R2CA01# 5.4pF ±0.05pF GRM1885C1H6R4WA01# ±0.25pF GRM1885C1H5R0CA01# ±0.25pF GRM1885C1H5R1CA01# 5.3pF ±0.05pF GRM1885C1H6R3WA01# ±0.25pF GRM1885C1H4R9CA01# ±0.1pF GRM1885C1H5R1BA01# 5.2pF ±0.05pF GRM1885C1H6R2WA01# ±0.05pF GRM1885C1H4R8WA01# ±0.1pF GRM1885C1H5R0BA01# 5.1pF ±0.05pF GRM1885C1H6R1WA01# ±0.05pF GRM1885C1H4R7WA01# ±0.25pF GRM1885C1H4R8CA01# 4.9pF ±0.05pF GRM1885C1H6R0WA01# ±0.1pF GRM1885C1H6R0BA01# ±0.25pF GRM1885C1H4R7CA01# 4.8pF ±0.5pF GRM1885C1H5R9DA01# 6.0pF ±0.1pF GRM1885C1H4R5BA01# ±0.1pF GRM1885C1H4R6BA01# 4.7pF ±0.05pF GRM1885C1H5R9WA01# ±0.05pF GRM1885C1H4R4WA01# ±0.25pF GRM1885C1H4R4CA01# 4.6pF ±0.05pF GRM1885C1H5R8WA01# ±0.05pF GRM1885C1H4R3WA01# ±0.1pF GRM1885C1H4R3BA01# 4.5pF Part Number ±0.25pF GRM1885C1H4R2CA01# ±0.25pF GRM1885C1H4R3CA01# 4.4pF Tol. ±0.5pF GRM1885C1H6R9DA01# 7.0pF ±0.05pF GRM1885C1H7R0WA01# ±0.5pF GRM1885C1H5R6DA01# ±0.1pF GRM1885C1H7R0BA01# ±0.05pF GRM1885C1H5R7WA01# ±0.25pF GRM1885C1H7R0CA01# ±0.5pF GRM1885C1H7R0DA01# ±0.1pF GRM1885C1H5R7BA01# ±0.25pF GRM1885C1H5R7CA01# ±0.5pF GRM1885C1H5R7DA01# 7.1pF ±0.05pF GRM1885C1H7R1WA01# ±0.1pF GRM1885C1H7R1BA01# Part number # indicates the package specification code. 56 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.6×0.8mm) C0G 8.5pF ±0.1pF GRM1885C1H8R5BA01# ±0.25pF GRM1885C1H8R5CA01# ±0.5pF GRM1885C1H8R5DA01# 8.6pF ±0.5pF GRM1885C1H7R2DA01# ±0.1pF GRM1885C1H8R6BA01# ±0.25pF GRM1885C1H8R6CA01# ±0.1pF GRM1885C1H7R3BA01# ±0.5pF GRM1885C1H8R6DA01# 8.7pF ±0.1pF GRM1885C1H8R7BA01# ±0.05pF GRM1885C1H7R4WA01# ±0.25pF GRM1885C1H8R7CA01# ±0.25pF GRM1885C1H7R4CA01# ±0.5pF GRM1885C1H8R7DA01# 8.8pF ±0.5pF GRM1885C1H7R4DA01# ±0.1pF GRM1885C1H8R8BA01# ±0.25pF GRM1885C1H8R8CA01# ±0.1pF GRM1885C1H7R5BA01# ±0.5pF GRM1885C1H8R8DA01# 8.9pF ±0.1pF GRM1885C1H8R9BA01# ±0.05pF GRM1885C1H7R6WA01# ±0.25pF GRM1885C1H8R9CA01# ±0.1pF GRM1885C1H7R6BA01# ±0.5pF GRM1885C1H8R9DA01# 9.0pF ±0.5pF GRM1885C1H7R6DA01# ±0.1pF GRM1885C1H9R0BA01# ±0.25pF GRM1885C1H9R0CA01# ±0.1pF GRM1885C1H7R7BA01# ±0.5pF GRM1885C1H9R0DA01# 9.1pF ±0.1pF GRM1885C1H9R1BA01# ±0.05pF GRM1885C1H7R8WA01# ±0.25pF GRM1885C1H9R1CA01# ±0.25pF GRM1885C1H7R8CA01# ±0.5pF GRM1885C1H9R1DA01# 9.2pF ±0.5pF GRM1885C1H7R8DA01# ±0.1pF GRM1885C1H9R2BA01# ±0.25pF GRM1885C1H9R2CA01# ±0.1pF GRM1885C1H7R9BA01# ±0.5pF GRM1885C1H9R2DA01# 9.3pF ±0.5pF GRM1885C1H7R9DA01# ±0.1pF GRM1885C1H9R3BA01# ±0.25pF GRM1885C1H9R3CA01# ±0.1pF GRM1885C1H8R0BA01# ±0.5pF GRM1885C1H9R3DA01# 9.4pF ±0.5pF GRM1885C1H8R0DA01# ±0.1pF GRM1885C1H9R4BA01# ±0.25pF GRM1885C1H9R4CA01# ±0.1pF GRM1885C1H8R1BA01# ±0.5pF GRM1885C1H9R4DA01# 9.5pF ±0.05pF GRM1885C1H9R5WA01# ±0.5pF GRM1885C1H8R1DA01# ±0.1pF GRM1885C1H9R5BA01# ±0.05pF GRM1885C1H8R2WA01# ±0.25pF GRM1885C1H9R5CA01# ±0.1pF GRM1885C1H8R2BA01# ±0.25pF GRM1885C1H8R2CA01# ±0.5pF GRM1885C1H9R5DA01# 9.6pF ±0.05pF GRM1885C1H9R6WA01# ±0.5pF GRM1885C1H8R2DA01# ±0.1pF GRM1885C1H9R6BA01# ±0.05pF GRM1885C1H8R3WA01# ±0.25pF GRM1885C1H9R6CA01# ±0.1pF GRM1885C1H8R3BA01# ±0.25pF GRM1885C1H8R3CA01# 8.4pF ±0.05pF GRM1885C1H9R4WA01# ±0.05pF GRM1885C1H8R1WA01# ±0.25pF GRM1885C1H8R1CA01# 8.3pF ±0.05pF GRM1885C1H9R3WA01# ±0.05pF GRM1885C1H8R0WA01# ±0.25pF GRM1885C1H8R0CA01# 8.2pF ±0.05pF GRM1885C1H9R2WA01# ±0.05pF GRM1885C1H7R9WA01# ±0.25pF GRM1885C1H7R9CA01# 8.1pF ±0.05pF GRM1885C1H9R1WA01# ±0.5pF GRM1885C1H7R7DA01# ±0.1pF GRM1885C1H7R8BA01# 8.0pF ±0.05pF GRM1885C1H9R0WA01# ±0.05pF GRM1885C1H7R7WA01# ±0.25pF GRM1885C1H7R7CA01# 7.9pF ±0.05pF GRM1885C1H8R9WA01# ±0.5pF GRM1885C1H7R5DA01# ±0.25pF GRM1885C1H7R6CA01# 7.8pF ±0.05pF GRM1885C1H8R8WA01# ±0.05pF GRM1885C1H7R5WA01# ±0.25pF GRM1885C1H7R5CA01# 7.7pF ±0.05pF GRM1885C1H8R7WA01# ±0.5pF GRM1885C1H7R3DA01# ±0.1pF GRM1885C1H7R4BA01# 7.6pF ±0.05pF GRM1885C1H8R6WA01# ±0.05pF GRM1885C1H7R3WA01# ±0.25pF GRM1885C1H7R3CA01# 7.5pF ±0.05pF GRM1885C1H8R5WA01# ±0.05pF GRM1885C1H7R2WA01# ±0.1pF GRM1885C1H7R2BA01# 7.4pF Part Number ±0.5pF GRM1885C1H7R1DA01# ±0.25pF GRM1885C1H7R2CA01# 7.3pF Tol. ±0.5pF GRM1885C1H9R6DA01# 9.7pF ±0.05pF GRM1885C1H9R7WA01# ±0.5pF GRM1885C1H8R3DA01# ±0.1pF GRM1885C1H9R7BA01# ±0.05pF GRM1885C1H8R4WA01# ±0.25pF GRM1885C1H9R7CA01# ±0.5pF GRM1885C1H9R7DA01# ±0.1pF GRM1885C1H8R4BA01# ±0.25pF GRM1885C1H8R4CA01# ±0.5pF GRM1885C1H8R4DA01# For General Purpose GRM Series 50Vdc Cap. Capacitor Array GNM Series 0.9mm Rated TC Voltage Code Low ESL LLp Series 7.2pF ±0.25pF GRM1885C1H7R1CA01# T max. High-Q Type GJM Series 7.1pF Part Number High Frequency GQM Series C0G Tol. Monolithic Microchip GMA Series 50Vdc Cap. For Bonding GMD Series 0.9mm Rated TC Voltage Code Product Information T max. 9.8pF ±0.05pF GRM1885C1H9R8WA01# ±0.1pF GRM1885C1H9R8BA01# Part number # indicates the package specification code. 57 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.6×0.8mm) T max. For General Purpose GRM Series 0.9mm Rated TC Voltage Code 50Vdc C0G Cap. 9.8pF 9.9pF Tol. Part Number ±0.25pF GRM1885C1H9R8CA01# T max. 0.9mm Rated TC Voltage Code 50Vdc CK Cap. 1.2pF Part Number ±0.05pF GRM1884C1H1R2WA01# ±0.5pF GRM1885C1H9R8DA01# ±0.1pF GRM1884C1H1R2BA01# ±0.05pF GRM1885C1H9R9WA01# ±0.25pF GRM1884C1H1R2CA01# ±0.1pF GRM1885C1H9R9BA01# 1.3pF ±0.25pF GRM1885C1H9R9CA01# ±0.05pF GRM1884C1H1R3WA01# ±0.1pF GRM1884C1H1R3BA01# ±0.5pF GRM1885C1H9R9DA01# ±0.25pF GRM1884C1H1R3CA01# Capacitor Array GNM Series Low ESL LLp Series High-Q Type GJM Series High Frequency GQM Series Monolithic Microchip GMA Series 10pF ±5% GRM1885C1H100JA01# 12pF ±5% GRM1885C1H120JA01# ±0.1pF GRM1884C1H1R4BA01# 15pF ±5% GRM1885C1H150JA01# ±0.25pF GRM1884C1H1R4CA01# 18pF ±5% GRM1885C1H180JA01# 22pF ±5% GRM1885C1H220JA01# ±0.1pF GRM1884C1H1R5BA01# 27pF ±5% GRM1885C1H270JA01# ±0.25pF GRM1884C1H1R5CA01# 33pF ±5% GRM1885C1H330JA01# 39pF ±5% GRM1885C1H390JA01# ±0.1pF GRM1884C1H1R6BA01# 47pF ±5% GRM1885C1H470JA01# ±0.25pF GRM1884C1H1R6CA01# 56pF ±5% GRM1885C1H560JA01# 68pF ±5% GRM1885C1H680JA01# ±0.1pF GRM1884C1H1R7BA01# 82pF ±5% GRM1885C1H820JA01# ±0.25pF GRM1884C1H1R7CA01# 100pF ±5% GRM1885C1H101JA01# 120pF ±5% GRM1885C1H121JA01# ±0.1pF GRM1884C1H1R8BA01# 150pF ±5% GRM1885C1H151JA01# ±0.25pF GRM1884C1H1R8CA01# 180pF ±5% GRM1885C1H181JA01# 220pF ±5% GRM1885C1H221JA01# ±0.1pF GRM1884C1H1R9BA01# 270pF ±5% GRM1885C1H271JA01# ±0.25pF GRM1884C1H1R9CA01# 330pF ±5% GRM1885C1H331JA01# 390pF ±5% GRM1885C1H391JA01# 470pF ±5% GRM1885C1H471JA01# 560pF ±5% GRM1885C1H561JA01# 680pF ±5% GRM1885C1H681JA01# ±0.1pF GRM1883C1H2R1BA01# 820pF ±5% GRM1885C1H821JA01# ±0.25pF GRM1883C1H2R1CA01# 1000pF ±5% GRM1885C1H102JA01# 1200pF ±5% GRM1885C1H122JA01# ±0.1pF GRM1883C1H2R2BA01# 1500pF ±5% GRM1885C1H152JA01# ±0.25pF GRM1883C1H2R2CA01# 1800pF ±5% GRM1885C1H182JA01# 2200pF ±5% GRM1885C1H222JA01# ±0.1pF GRM1883C1H2R3BA01# 2700pF ±5% GRM1885C1H272JA01# ±0.25pF GRM1883C1H2R3CA01# 3300pF ±5% GRM1885C1H332JA01# ±5% GRM1885C1H392JA01# 3900pF CK Tol. 1.4pF 1.5pF 1.6pF 1.7pF 1.8pF 1.9pF 2.0pF ±0.05pF GRM1884C1H1R4WA01# ±0.05pF GRM1884C1H1R5WA01# ±0.05pF GRM1884C1H1R6WA01# ±0.05pF GRM1884C1H1R7WA01# ±0.05pF GRM1884C1H1R8WA01# ±0.05pF GRM1884C1H1R9WA01# ±0.05pF GRM1884C1H2R0WA01# ±0.1pF GRM1884C1H2R0BA01# ±0.25pF GRM1884C1H2R0CA01# CJ 2.1pF 2.2pF 2.3pF 2.4pF ±0.05pF GRM1883C1H2R1WA01# ±0.05pF GRM1883C1H2R2WA01# ±0.05pF GRM1883C1H2R3WA01# ±0.05pF GRM1883C1H2R4WA01# ±0.1pF GRM1883C1H2R4BA01# 0.5pF ±0.05pF GRM1884C1HR50WA01# 0.6pF ±0.05pF GRM1884C1HR60WA01# ±0.1pF GRM1883C1H2R5BA01# ±0.1pF GRM1884C1HR60BA01# ±0.25pF GRM1883C1H2R5CA01# ±0.1pF GRM1884C1HR50BA01# For Bonding GMD Series 0.7pF ±0.05pF GRM1884C1HR70WA01# ±0.25pF GRM1883C1H2R4CA01# 2.5pF 2.6pF ±0.05pF GRM1883C1H2R5WA01# ±0.05pF GRM1883C1H2R6WA01# ±0.1pF GRM1884C1HR70BA01# ±0.1pF GRM1883C1H2R6BA01# 0.8pF ±0.05pF GRM1884C1HR80WA01# ±0.25pF GRM1883C1H2R6CA01# 0.9pF ±0.05pF GRM1884C1HR90WA01# 1.0pF ±0.05pF GRM1884C1H1R0WA01# ±0.1pF GRM1884C1HR80BA01# 2.7pF ±0.1pF GRM1883C1H2R7BA01# ±0.1pF GRM1884C1HR90BA01# Product Information 1.1pF ±0.05pF GRM1883C1H2R7WA01# ±0.25pF GRM1883C1H2R7CA01# 2.8pF ±0.05pF GRM1883C1H2R8WA01# ±0.1pF GRM1884C1H1R0BA01# ±0.1pF GRM1883C1H2R8BA01# ±0.25pF GRM1884C1H1R0CA01# ±0.25pF GRM1883C1H2R8CA01# ±0.05pF GRM1884C1H1R1WA01# ±0.1pF GRM1884C1H1R1BA01# ±0.25pF GRM1884C1H1R1CA01# 2.9pF ±0.05pF GRM1883C1H2R9WA01# ±0.1pF GRM1883C1H2R9BA01# ±0.25pF GRM1883C1H2R9CA01# Part number # indicates the package specification code. 58 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.6×0.8mm) CH 4.8pF 3.4pF ±0.1pF GRM1882C1H4R8BA01# ±0.25pF GRM1882C1H4R8CA01# ±0.05pF GRM1883C1H3R1WA01# ±0.05pF GRM1883C1H3R2WA01# 4.9pF ±0.1pF GRM1882C1H4R9BA01# ±0.25pF GRM1882C1H4R9CA01# 5.0pF ±0.1pF GRM1882C1H5R0BA01# ±0.25pF GRM1882C1H5R0CA01# ±0.05pF GRM1883C1H3R3WA01# 5.1pF 3.8pF ±0.1pF GRM1883C1H3R3BA01# ±0.1pF GRM1882C1H5R1BA01# ±0.25pF GRM1882C1H5R1CA01# ±0.05pF GRM1883C1H3R4WA01# ±0.5pF GRM1882C1H5R1DA01# 5.2pF ±0.1pF GRM1882C1H5R2BA01# ±0.05pF GRM1883C1H3R5WA01# ±0.25pF GRM1882C1H5R2CA01# ±0.5pF GRM1882C1H5R2DA01# 5.3pF ±0.1pF GRM1882C1H5R3BA01# ±0.1pF GRM1883C1H3R6BA01# ±0.25pF GRM1882C1H5R3CA01# ±0.25pF GRM1883C1H3R6CA01# ±0.5pF GRM1882C1H5R3DA01# ±0.05pF GRM1883C1H3R7WA01# 5.4pF ±0.1pF GRM1882C1H5R4BA01# ±0.25pF GRM1883C1H3R7CA01# ±0.25pF GRM1882C1H5R4CA01# ±0.05pF GRM1883C1H3R8WA01# ±0.5pF GRM1882C1H5R4DA01# 5.5pF 4.2pF ±0.25pF GRM1883C1H3R8CA01# ±0.1pF GRM1882C1H5R5BA01# ±0.25pF GRM1882C1H5R5CA01# ±0.5pF GRM1882C1H5R5DA01# 5.6pF ±0.1pF GRM1882C1H5R6BA01# ±0.1pF GRM1882C1H4R0BA01# ±0.25pF GRM1882C1H5R6CA01# ±0.05pF GRM1882C1H4R1WA01# ±0.5pF GRM1882C1H5R6DA01# 5.7pF ±0.1pF GRM1882C1H4R1BA01# ±0.1pF GRM1882C1H5R7BA01# ±0.25pF GRM1882C1H5R7CA01# ±0.05pF GRM1882C1H4R2WA01# ±0.5pF GRM1882C1H5R7DA01# 5.8pF ±0.1pF GRM1882C1H5R8BA01# ±0.05pF GRM1882C1H4R3WA01# ±0.25pF GRM1882C1H5R8CA01# ±0.5pF GRM1882C1H5R8DA01# 5.9pF ±0.1pF GRM1882C1H5R9BA01# ±0.1pF GRM1882C1H4R4BA01# ±0.25pF GRM1882C1H5R9CA01# ±0.05pF GRM1882C1H4R5WA01# ±0.5pF GRM1882C1H5R9DA01# 6.0pF ±0.05pF GRM1882C1H6R0WA01# ±0.1pF GRM1882C1H4R5BA01# ±0.1pF GRM1882C1H6R0BA01# ±0.25pF GRM1882C1H4R5CA01# ±0.25pF GRM1882C1H6R0CA01# ±0.05pF GRM1882C1H4R6WA01# ±0.1pF GRM1882C1H4R6BA01# 4.7pF ±0.05pF GRM1882C1H5R9WA01# ±0.05pF GRM1882C1H4R4WA01# ±0.25pF GRM1882C1H4R4CA01# 4.6pF ±0.05pF GRM1882C1H5R8WA01# ±0.25pF GRM1882C1H4R2CA01# ±0.1pF GRM1882C1H4R3BA01# 4.5pF ±0.05pF GRM1882C1H5R7WA01# ±0.25pF GRM1882C1H4R1CA01# ±0.25pF GRM1882C1H4R3CA01# 4.4pF ±0.05pF GRM1882C1H5R6WA01# ±0.05pF GRM1882C1H4R0WA01# ±0.1pF GRM1882C1H4R2BA01# 4.3pF ±0.05pF GRM1882C1H5R5WA01# ±0.05pF GRM1883C1H3R9WA01# ±0.25pF GRM1882C1H4R0CA01# 4.1pF ±0.05pF GRM1882C1H5R4WA01# ±0.1pF GRM1883C1H3R7BA01# ±0.1pF GRM1883C1H3R9BA01# 4.0pF ±0.05pF GRM1882C1H5R3WA01# ±0.05pF GRM1883C1H3R6WA01# ±0.25pF GRM1883C1H3R9CA01# CH ±0.05pF GRM1882C1H5R2WA01# ±0.25pF GRM1883C1H3R4CA01# ±0.1pF GRM1883C1H3R8BA01# 3.9pF ±0.05pF GRM1882C1H5R1WA01# ±0.25pF GRM1883C1H3R3CA01# ±0.1pF GRM1883C1H3R5BA01# 3.7pF ±0.05pF GRM1882C1H5R0WA01# ±0.1pF GRM1883C1H3R2BA01# ±0.25pF GRM1883C1H3R5CA01# 3.6pF ±0.05pF GRM1882C1H4R9WA01# ±0.25pF GRM1883C1H3R2CA01# ±0.1pF GRM1883C1H3R4BA01# 3.5pF ±0.05pF GRM1882C1H4R8WA01# ±0.25pF GRM1883C1H3R0CA01# ±0.25pF GRM1883C1H3R1CA01# 3.3pF Part Number ±0.1pF GRM1883C1H3R0BA01# ±0.1pF GRM1883C1H3R1BA01# 3.2pF Tol. ±0.5pF GRM1882C1H6R0DA01# 6.1pF ±0.05pF GRM1882C1H6R1WA01# ±0.25pF GRM1882C1H4R6CA01# ±0.1pF GRM1882C1H6R1BA01# ±0.05pF GRM1882C1H4R7WA01# ±0.25pF GRM1882C1H6R1CA01# ±0.1pF GRM1882C1H4R7BA01# ±0.5pF GRM1882C1H6R1DA01# ±0.25pF GRM1882C1H4R7CA01# For General Purpose GRM Series 50Vdc Cap. Capacitor Array GNM Series 0.9mm Rated TC Voltage Code Low ESL LLp Series 3.1pF ±0.05pF GRM1883C1H3R0WA01# T max. High-Q Type GJM Series 3.0pF Part Number High Frequency GQM Series CJ Tol. Monolithic Microchip GMA Series 50Vdc Cap. For Bonding GMD Series 0.9mm Rated TC Voltage Code Product Information T max. 6.2pF ±0.05pF GRM1882C1H6R2WA01# Part number # indicates the package specification code. 59 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.6×0.8mm) T max. For General Purpose GRM Series 0.9mm Rated TC Voltage Code 50Vdc CH Cap. 6.2pF Tol. Part Number ±0.1pF GRM1882C1H6R2BA01# ±0.25pF GRM1882C1H6R2CA01# 6.3pF 0.9mm Rated TC Voltage Code 50Vdc CH Cap. 7.5pF ±0.5pF GRM1882C1H7R5DA01# 7.6pF ±0.05pF GRM1882C1H7R6WA01# ±0.1pF GRM1882C1H7R6BA01# ±0.25pF GRM1882C1H7R6CA01# ±0.1pF GRM1882C1H6R3BA01# ±0.5pF GRM1882C1H7R6DA01# 7.7pF ±0.1pF GRM1882C1H7R7BA01# ±0.05pF GRM1882C1H6R4WA01# ±0.25pF GRM1882C1H7R7CA01# Capacitor Array GNM Series ±0.5pF GRM1882C1H7R7DA01# 7.8pF ±0.5pF GRM1882C1H6R4DA01# ±0.1pF GRM1882C1H7R8BA01# ±0.25pF GRM1882C1H7R8CA01# ±0.1pF GRM1882C1H6R5BA01# ±0.5pF GRM1882C1H7R8DA01# 7.9pF Low ESL LLp Series ±0.1pF GRM1882C1H7R9BA01# ±0.05pF GRM1882C1H6R6WA01# ±0.25pF GRM1882C1H7R9CA01# ±0.1pF GRM1882C1H6R6BA01# ±0.5pF GRM1882C1H7R9DA01# 8.0pF ±0.5pF GRM1882C1H6R6DA01# ±0.1pF GRM1882C1H8R0BA01# ±0.25pF GRM1882C1H8R0CA01# ±0.1pF GRM1882C1H6R7BA01# ±0.5pF GRM1882C1H8R0DA01# 8.1pF High-Q Type GJM Series ±0.1pF GRM1882C1H8R1BA01# ±0.05pF GRM1882C1H6R8WA01# ±0.25pF GRM1882C1H8R1CA01# ±0.1pF GRM1882C1H6R8BA01# ±0.5pF GRM1882C1H8R1DA01# 8.2pF ±0.5pF GRM1882C1H6R8DA01# ±0.1pF GRM1882C1H8R2BA01# ±0.25pF GRM1882C1H8R2CA01# High Frequency GQM Series ±0.1pF GRM1882C1H6R9BA01# ±0.5pF GRM1882C1H8R2DA01# 8.3pF ±0.1pF GRM1882C1H8R3BA01# ±0.05pF GRM1882C1H7R0WA01# ±0.25pF GRM1882C1H8R3CA01# ±0.25pF GRM1882C1H7R0CA01# ±0.5pF GRM1882C1H8R3DA01# 8.4pF Monolithic Microchip GMA Series ±0.5pF GRM1882C1H7R0DA01# ±0.1pF GRM1882C1H8R4BA01# ±0.25pF GRM1882C1H8R4CA01# ±0.1pF GRM1882C1H7R1BA01# ±0.5pF GRM1882C1H8R4DA01# 8.5pF ±0.1pF GRM1882C1H8R5BA01# ±0.05pF GRM1882C1H7R2WA01# ±0.25pF GRM1882C1H8R5CA01# ±0.1pF GRM1882C1H7R2BA01# ±0.5pF GRM1882C1H8R5DA01# 8.6pF ±0.05pF GRM1882C1H8R6WA01# For Bonding GMD Series ±0.5pF GRM1882C1H7R2DA01# ±0.1pF GRM1882C1H8R6BA01# ±0.05pF GRM1882C1H7R3WA01# ±0.25pF GRM1882C1H8R6CA01# ±0.1pF GRM1882C1H7R3BA01# ±0.25pF GRM1882C1H7R3CA01# ±0.5pF GRM1882C1H8R6DA01# 8.7pF ±0.05pF GRM1882C1H8R7WA01# ±0.5pF GRM1882C1H7R3DA01# ±0.1pF GRM1882C1H8R7BA01# ±0.05pF GRM1882C1H7R4WA01# ±0.25pF GRM1882C1H8R7CA01# Product Information ±0.1pF GRM1882C1H7R4BA01# ±0.25pF GRM1882C1H7R4CA01# 7.5pF ±0.05pF GRM1882C1H8R5WA01# ±0.5pF GRM1882C1H7R1DA01# ±0.25pF GRM1882C1H7R2CA01# 7.4pF ±0.05pF GRM1882C1H8R4WA01# ±0.05pF GRM1882C1H7R1WA01# ±0.25pF GRM1882C1H7R1CA01# 7.3pF ±0.05pF GRM1882C1H8R3WA01# ±0.5pF GRM1882C1H6R9DA01# ±0.1pF GRM1882C1H7R0BA01# 7.2pF ±0.05pF GRM1882C1H8R2WA01# ±0.05pF GRM1882C1H6R9WA01# ±0.25pF GRM1882C1H6R9CA01# 7.1pF ±0.05pF GRM1882C1H8R1WA01# ±0.5pF GRM1882C1H6R7DA01# ±0.25pF GRM1882C1H6R8CA01# 7.0pF ±0.05pF GRM1882C1H8R0WA01# ±0.05pF GRM1882C1H6R7WA01# ±0.25pF GRM1882C1H6R7CA01# 6.9pF ±0.05pF GRM1882C1H7R9WA01# ±0.5pF GRM1882C1H6R5DA01# ±0.25pF GRM1882C1H6R6CA01# 6.8pF ±0.05pF GRM1882C1H7R8WA01# ±0.05pF GRM1882C1H6R5WA01# ±0.25pF GRM1882C1H6R5CA01# 6.7pF ±0.05pF GRM1882C1H7R7WA01# ±0.5pF GRM1882C1H6R3DA01# ±0.1pF GRM1882C1H6R4BA01# 6.6pF Part Number ±0.5pF GRM1882C1H6R2DA01# ±0.25pF GRM1882C1H6R4CA01# 6.5pF Tol. ±0.05pF GRM1882C1H6R3WA01# ±0.25pF GRM1882C1H6R3CA01# 6.4pF T max. ±0.5pF GRM1882C1H8R7DA01# 8.8pF ±0.05pF GRM1882C1H8R8WA01# ±0.5pF GRM1882C1H7R4DA01# ±0.1pF GRM1882C1H8R8BA01# ±0.05pF GRM1882C1H7R5WA01# ±0.25pF GRM1882C1H8R8CA01# ±0.1pF GRM1882C1H7R5BA01# ±0.5pF GRM1882C1H8R8DA01# ±0.25pF GRM1882C1H7R5CA01# 8.9pF ±0.05pF GRM1882C1H8R9WA01# Part number # indicates the package specification code. 60 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.6×0.8mm) 9.2pF 9.3pF 9.4pF 9.6pF 9.7pF 9.9pF 82pF ±5% GRM1882C1H820JA01# ±5% GRM1882C1H101JA01# ±0.5pF GRM1882C1H8R9DA01# 120pF ±5% GRM1882C1H121JA01# ±0.05pF GRM1882C1H9R0WA01# 150pF ±5% GRM1882C1H151JA01# ±0.1pF GRM1882C1H9R0BA01# 180pF ±5% GRM1882C1H181JA01# ±0.25pF GRM1882C1H9R0CA01# 220pF ±5% GRM1882C1H221JA01# ±0.5pF GRM1882C1H9R0DA01# 270pF ±5% GRM1882C1H271JA01# ±0.05pF GRM1882C1H9R1WA01# 330pF ±5% GRM1882C1H331JA01# ±0.1pF GRM1882C1H9R1BA01# 390pF ±5% GRM1882C1H391JA01# ±0.25pF GRM1882C1H9R1CA01# 470pF ±5% GRM1882C1H471JA01# 0.9mm 50Vdc CH ±0.5pF GRM1882C1H9R1DA01# 560pF ±5% GRM1882C1H561JA01# ±0.05pF GRM1882C1H9R2WA01# 680pF ±5% GRM1882C1H681JA01# ±0.1pF GRM1882C1H9R2BA01# 820pF ±5% GRM1882C1H821JA01# ±0.25pF GRM1882C1H9R2CA01# 1000pF ±5% GRM1882C1H102JA01# ±0.5pF GRM1882C1H9R2DA01# 1200pF ±5% GRM1882C1H122JA01# ±0.05pF GRM1882C1H9R3WA01# 1500pF ±5% GRM1882C1H152JA01# ±0.1pF GRM1882C1H9R3BA01# 1800pF ±5% GRM1882C1H182JA01# ±0.25pF GRM1882C1H9R3CA01# 2200pF ±5% GRM1882C1H222JA01# ±0.5pF GRM1882C1H9R3DA01# 2700pF ±5% GRM1882C1H272JA01# ±0.05pF GRM1882C1H9R4WA01# 3300pF ±5% GRM1882C1H332JA01# ±0.1pF GRM1882C1H9R4BA01# 3900pF ±5% GRM1882C1H392JA01# 1200pF ±5% GRM1881X1H122JA01# ±0.5pF GRM1882C1H9R4DA01# 1500pF ±5% GRM1881X1H152JA01# ±0.05pF GRM1882C1H9R5WA01# 1800pF ±5% GRM1881X1H182JA01# ±0.1pF GRM1882C1H9R5BA01# 2200pF ±5% GRM1881X1H222JA01# ±0.25pF GRM1882C1H9R5CA01# 2700pF ±5% GRM1881X1H272JA01# SL ±0.5pF GRM1882C1H9R5DA01# 3300pF ±5% GRM1881X1H332JA01# ±0.05pF GRM1882C1H9R6WA01# 3900pF ±5% GRM1881X1H392JA01# ±0.1pF GRM1882C1H9R6BA01# 4700pF ±5% GRM1881X1H472JA01# ±0.25pF GRM1882C1H9R6CA01# 5600pF ±5% GRM1881X1H562JA01# ±0.5pF GRM1882C1H9R6DA01# 6800pF ±5% GRM1881X1H682JA01# ±0.05pF GRM1882C1H9R7WA01# 8200pF ±5% GRM1881X1H822JA01# ±0.1pF GRM1882C1H9R7BA01# 10000pF ±5% GRM1881X1H103JA01# 1200pF ±5% GRM1887U1H122JA01# ±0.5pF GRM1882C1H9R7DA01# 1500pF ±5% GRM1887U1H152JA01# ±0.05pF GRM1882C1H9R8WA01# 1800pF ±5% GRM1887U1H182JA01# ±0.1pF GRM1882C1H9R8BA01# 2200pF ±5% GRM1887U1H222JA01# ±0.25pF GRM1882C1H9R8CA01# 2700pF ±5% GRM1887U1H272JA01# ±0.5pF GRM1882C1H9R8DA01# 3300pF ±5% GRM1887U1H332JA01# ±0.05pF GRM1882C1H9R9WA01# 3900pF ±5% GRM1887U1H392JA01# ±0.1pF GRM1882C1H9R9BA01# 4700pF ±5% GRM1887U1H472JA01# ±0.25pF GRM1882C1H9R9CA01# 5600pF ±5% GRM1887U1H562JA01# ±0.5pF GRM1882C1H9R9DA01# U2J 6800pF ±5% GRM1887U1H682JA01# 10pF ±5% GRM1882C1H100JA01# 8200pF ±5% GRM1887U1H822JA01# 12pF ±5% GRM1882C1H120JA01# 10000pF ±5% GRM1887U1H103JA01# 15pF ±5% GRM1882C1H150JA01# 1000pF ±5% GRM1883U1H102JA01# 18pF ±5% GRM1882C1H180JA01# 1200pF ±5% GRM1883U1H122JA01# 22pF ±5% GRM1882C1H220JA01# 1500pF ±5% GRM1883U1H152JA01# 27pF ±5% GRM1882C1H270JA01# 1800pF ±5% GRM1883U1H182JA01# 33pF ±5% GRM1882C1H330JA01# 2200pF ±5% GRM1883U1H222JA01# 39pF ±5% GRM1882C1H390JA01# 2700pF ±5% GRM1883U1H272JA01# 47pF ±5% GRM1882C1H470JA01# 3300pF ±5% GRM1883U1H332JA01# 56pF ±5% GRM1882C1H560JA01# 3900pF ±5% GRM1883U1H392JA01# 68pF ±5% GRM1882C1H680JA01# 4700pF ±5% GRM1883U1H472JA01# UJ For General Purpose GRM Series Part Number 100pF ±0.25pF GRM1882C1H9R7CA01# 9.8pF Tol. ±0.25pF GRM1882C1H8R9CA01# ±0.25pF GRM1882C1H9R4CA01# 9.5pF Cap. Capacitor Array GNM Series 9.1pF Rated TC Voltage Code Low ESL LLp Series 9.0pF ±0.1pF GRM1882C1H8R9BA01# T max. High-Q Type GJM Series 8.9pF Part Number High Frequency GQM Series CH Tol. Monolithic Microchip GMA Series 50Vdc Cap. For Bonding GMD Series 0.9mm Rated TC Voltage Code Product Information T max. Part number # indicates the package specification code. 61 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 1.6×0.8mm) T max. For General Purpose GRM Series 0.9mm Rated TC Voltage Code 50Vdc 10Vdc Capacitor Array GNM Series 1500pF ±5% GRM2162C2A152JA01# 1800pF ±5% GRM2162C2A182JA01# GRM1883U1H822JA01# 2200pF ±5% GRM2162C2A222JA01# ±5% GRM1883U1H103JA01# 2700pF ±5% GRM2162C2A272JA01# 12000pF ±5% GRM1881X1A123JA01# 3300pF ±5% GRM2162C2A332JA01# 15000pF ±5% GRM1881X1A153JA01# 1200pF ±5% GRM2165C1H122JA01# 18000pF ±5% GRM1881X1A183JA01# 1500pF ±5% GRM2165C1H152JA01# 22000pF ±5% GRM1881X1A223JA01# 1800pF ±5% GRM2165C1H182JA01# U2J 12000pF ±5% GRM1887U1A123JA01# 2200pF ±5% GRM2165C1H222JA01# 15000pF ±5% GRM1887U1A153JA01# 2700pF ±5% GRM2165C1H272JA01# 18000pF ±5% GRM1887U1A183JA01# 3300pF ±5% GRM2165C1H332JA01# 22000pF ±5% GRM1887U1A223JA01# 3900pF ±5% GRM2165C1H392JA01# 12000pF ±5% GRM1883U1A123JA01# 4700pF ±5% GRM2165C1H472JA01# 15000pF ±5% GRM1883U1A153JA01# 1200pF ±5% GRM2162C1H122JA01# 18000pF ±5% GRM1883U1A183JA01# 1500pF ±5% GRM2162C1H152JA01# ±5% GRM1883U1A223JA01# 1800pF ±5% GRM2162C1H182JA01# 2200pF ±5% GRM2162C1H222JA01# 2700pF ±5% GRM2162C1H272JA01# 3300pF ±5% GRM2162C1H332JA01# 3900pF ±5% GRM2162C1H392JA01# 4700pF ±5% GRM2162C1H472JA01# UJ 5600pF ±5% GRM1883U1H562JA01# 6800pF ±5% GRM1883U1H682JA01# 8200pF ±5% 10000pF Low ESL LLp Series 22000pF Part Number Rated TC Voltage Code Tol. SL Tol. T max. Cap. UJ Cap. 0.7mm 100Vdc 50Vdc CH C0G CH c 2.0×1.25mm T max. Rated TC Voltage Code 0.7mm 100Vdc C0G High-Q Type GJM Series High Frequency GQM Series Monolithic Microchip GMA Series CH Cap. Tol. Part Number Part Number For Bonding GMD Series Product Information 100pF ±5% GRM2165C2A101JA01# 12000pF ±5% GRM2161X1H123JA01# 120pF ±5% GRM2165C2A121JA01# 15000pF ±5% GRM2161X1H153JA01# 150pF ±5% GRM2165C2A151JA01# 18000pF ±5% GRM2161X1H183JA01# 180pF ±5% GRM2165C2A181JA01# U2J 12000pF ±5% GRM2167U1H123JA01# 220pF ±5% GRM2165C2A221JA01# 15000pF ±5% GRM2167U1H153JA01# 270pF ±5% GRM2165C2A271JA01# 18000pF ±5% GRM2167U1H183JA01# 330pF ±5% GRM2165C2A331JA01# 10000pF ±5% GRM2163U1H103JA01# 390pF ±5% GRM2165C2A391JA01# 12000pF ±5% GRM2163U1H123JA01# 470pF ±5% GRM2165C2A471JA01# 15000pF ±5% GRM2163U1H153JA01# 560pF ±5% GRM2165C2A561JA01# 18000pF ±5% GRM2163U1H183JA01# 680pF ±5% GRM2165C2A681JA01# 5600pF ±5% GRM2195C1H562JA01# 820pF ±5% GRM2165C2A821JA01# 6800pF ±5% GRM2195C1H682JA01# 1000pF ±5% GRM2165C2A102JA01# 8200pF ±5% GRM2195C1H822JA01# 1200pF ±5% GRM2165C2A122JA01# 10000pF ±5% GRM2195C1H103JA01# 1500pF ±5% GRM2165C2A152JA01# 12000pF ±5% GRM2195C1H123JA01# 1800pF ±5% GRM2165C2A182JA01# 15000pF ±5% GRM2195C1H153JA01# 2200pF ±5% GRM2165C2A222JA01# 5600pF ±5% GRM2192C1H562JA01# 2700pF ±5% GRM2165C2A272JA01# 6800pF ±5% GRM2192C1H682JA01# 3300pF ±5% GRM2165C2A332JA01# 8200pF ±5% GRM2192C1H822JA01# 100pF ±5% GRM2162C2A101JA01# 10000pF ±5% GRM2192C1H103JA01# 120pF ±5% GRM2162C2A121JA01# 12000pF ±5% GRM2192C1H123JA01# 150pF ±5% GRM2162C2A151JA01# 15000pF ±5% GRM2192C1H153JA01# 180pF ±5% GRM2162C2A181JA01# 22000pF ±5% GRM2191X1H223JA01# 220pF ±5% GRM2162C2A221JA01# 27000pF ±5% GRM2191X1H273JA01# 270pF ±5% GRM2162C2A271JA01# U2J 22000pF ±5% GRM2197U1H223JA01# 330pF ±5% GRM2162C2A331JA01# 27000pF ±5% GRM2197U1H273JA01# 390pF ±5% GRM2162C2A391JA01# 22000pF ±5% GRM2193U1H223JA01# 470pF ±5% GRM2162C2A471JA01# 27000pF ±5% GRM2193U1H273JA01# 560pF ±5% GRM2162C2A561JA01# 56000pF ±5% GRM2191X1A563JA01# 680pF ±5% GRM2162C2A681JA01# U2J 56000pF ±5% GRM2197U1A563JA01# 820pF ±5% GRM2162C2A821JA01# UJ 56000pF ±5% GRM2193U1A563JA01# 1000pF ±5% GRM2162C2A102JA01# SL 33000pF ±5% GRM21A1X1H333JA39# 1200pF ±5% GRM2162C2A122JA01# U2J 33000pF ±5% GRM21A7U1H333JA39# SL UJ 0.95mm 50Vdc C0G CH SL UJ 10Vdc 1mm 50Vdc SL Part number # indicates the package specification code. 62 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Temperature Compensating Type Part Number List (→ c 2.0×1.25mm) GRM21A3U1H333JA39# C0G 15000pF ±5% GRM3195C1H153JA01# GRM21B5C1H183JA01# 18000pF ±5% GRM3195C1H183JA01# 22000pF ±5% GRM21B5C1H223JA01# 22000pF ±5% GRM3195C1H223JA01# 18000pF ±5% GRM21B2C1H183JA01# 27000pF ±5% GRM3195C1H273JA01# 22000pF ±5% GRM21B2C1H223JA01# 33000pF ±5% GRM3195C1H333JA01# 39000pF ±5% GRM21B1X1H393JA01# 47000pF ±5% GRM21B1X1H473JA01# U2J 39000pF ±5% 47000pF UJ 10Vdc SL 39000pF ±5% GRM3195C1H393JA01# 12000pF ±5% GRM3192C1H123JA01# GRM21B7U1H393JA01# 15000pF ±5% GRM3192C1H153JA01# ±5% GRM21B7U1H473JA01# 18000pF ±5% GRM3192C1H183JA01# 39000pF ±5% GRM21B3U1H393JA01# 22000pF ±5% GRM3192C1H223JA01# 47000pF ±5% GRM21B3U1H473JA01# 27000pF ±5% GRM3192C1H273JA01# 68000pF ±5% GRM21B1X1A683JA01# 33000pF ±5% GRM3192C1H333JA01# 82000pF ±5% GRM21B1X1A823JA01# 39000pF ±5% GRM3192C1H393JA01# 0.1µF ±5% GRM21B1X1A104JA01# SL 56000pF ±5% GRM3191X1H563JA01# ±5% GRM21B7U1A683JA01# U2J 56000pF ±5% GRM3197U1H563JA01# 82000pF ±5% GRM21B7U1A823JA01# UJ 56000pF ±5% GRM3193U1H563JA01# C0G 47000pF ±5% GRM31M5C1H473JA01# 56000pF ±5% GRM31M5C1H563JA01# 47000pF ±5% GRM31M2C1H473JA01# 56000pF ±5% GRM31M2C1H563JA01# 68000pF ±5% GRM31M1X1H683JA01# 82000pF ±5% GRM31M1X1H823JA01# 0.1µF ±5% GRM31M1X1H104JA01# U2J 68000pF ±5% GRM31M7U1H683JA01# 82000pF ±5% GRM31M7U1H823JA01# 0.1µF ±5% GRM31M7U1H104JA01# U2J 68000pF UJ 0.95mm 50Vdc 0.1µF ±5% GRM21B7U1A104JA01# 68000pF ±5% GRM21B3U1A683JA01# 82000pF ±5% GRM21B3U1A823JA01# 0.1µF ±5% GRM21B3U1A104JA01# CH 1.25mm 50Vdc CH SL c 3.2×1.6mm Rated TC Voltage Code 0.95mm 100Vdc C0G CH Cap. Tol. Part Number 1800pF ±5% GRM3195C2A182JA01# 2200pF ±5% GRM3195C2A222JA01# 68000pF ±5% GRM31M3U1H683JA01# 2700pF ±5% GRM3195C2A272JA01# 82000pF ±5% GRM31M3U1H823JA01# 3300pF ±5% GRM3195C2A332JA01# 0.1µF ±5% GRM31M3U1H104JA01# 3900pF ±5% GRM3195C2A392JA01# C0G 68000pF ±5% GRM31C5C1H683JA01# 4700pF ±5% GRM3195C2A472JA01# 82000pF ±5% GRM31C5C1H823JA01# 5600pF ±5% GRM3195C2A562JA01# 6800pF ±5% GRM3195C2A682JA01# 8200pF ±5% 10000pF UJ 1.8mm 50Vdc 0.1µF ±5% GRM31C5C1H104JA01# 68000pF ±5% GRM31C2C1H683JA01# GRM3195C2A822JA01# 82000pF ±5% GRM31C2C1H823JA01# ±5% GRM3195C2A103JA01# 0.1µF ±5% GRM31C2C1H104JA01# 12000pF ±5% GRM3195C2A123JA01# 15000pF ±5% GRM3195C2A153JA01# 18000pF ±5% GRM3195C2A183JA01# 22000pF ±5% GRM3195C2A223JA01# 1800pF ±5% GRM3192C2A182JA01# 2200pF ±5% GRM3192C2A222JA01# 2700pF ±5% GRM3192C2A272JA01# 3300pF ±5% GRM3192C2A332JA01# 3900pF ±5% GRM3192C2A392JA01# 4700pF ±5% GRM3192C2A472JA01# 5600pF ±5% GRM3192C2A562JA01# 6800pF ±5% GRM3192C2A682JA01# 8200pF ±5% GRM3192C2A822JA01# 10000pF ±5% GRM3192C2A103JA01# 12000pF ±5% GRM3192C2A123JA01# 15000pF ±5% GRM3192C2A153JA01# 18000pF ±5% GRM3192C2A183JA01# 22000pF ±5% GRM3192C2A223JA01# C0G 12000pF ±5% GRM3195C1H123JA01# CH Capacitor Array GNM Series ±5% For General Purpose GRM Series Part Number ±5% SL 50Vdc Tol. 33000pF UJ CH T max. Cap. Low ESL LLp Series Rated TC Voltage Code High-Q Type GJM Series T max. High Frequency GQM Series Part Number Monolithic Microchip GMA Series Tol. C0G 18000pF 50Vdc 1.35mm 50Vdc Cap. For Bonding GMD Series 1mm Rated TC Voltage Code Product Information T max. Part number # indicates the package specification code. 63 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series High Dielectric Constant Type Part Number List c 0.4×0.2mm For General Purpose GRM Series T max. Rated TC Voltage Code 0.22mm 10Vdc T max. Ultracompact X7R Cap. 0.22mm 10Vdc B Capacitor Array GNM Series Part Number 680pF ±10% GRM022B31A681KE19# ±20% GRM022B31A681ME19# ±10% GRM022B31A102KE19# ±20% GRM022B31A102ME19# 1500pF ±10% GRM022B31A152KE19# ±20% GRM022B31A152ME19# 2200pF ±10% GRM022B31A222KE19# ±20% GRM022B31A222ME19# ±10% GRM022B31A332KE19# ±20% GRM022B31A332ME19# ±10% GRM022B31A472KE19# ±20% GRM022B31A472ME19# ±10% GRM022B31A682KE19# ±20% GRM022B31A682ME19# ±10% GRM022B31A103KE19# ±20% GRM022B31A103ME19# ±20% GRM022R71A680MA01# 100pF ±10% GRM022R71A101KA01# ±20% GRM022R71A101MA01# 150pF ±10% GRM022R71A151KA01# ±20% GRM022R71A151MA01# ±10% GRM022R71A221KA01# ±20% GRM022R71A221MA01# ±10% GRM022R71A331KA01# ±20% GRM022R71A331MA01# ±10% GRM022R71A471KA01# ±20% GRM022R71A471MA01# ±10% GRM022R61A680KA01# ±20% GRM022R61A680MA01# ±10% GRM022R61A101KA01# 680pF ±20% GRM022R60J681ME19# ±20% GRM022R61A101MA01# 1000pF ±20% GRM022R60J102ME19# ±10% GRM022R61A151KA01# 1500pF ±20% GRM022R60J152ME19# ±20% GRM022R61A151MA01# 2200pF ±20% GRM022R60J222ME19# 220pF ±10% GRM022R61A221KA01# 3300pF ±20% GRM022R60J332ME19# ±20% GRM022R61A221MA01# 4700pF ±20% GRM022R60J472ME19# 330pF ±10% GRM022R61A331KA01# 6800pF ±20% GRM022R60J682ME19# ±20% GRM022R61A331MA01# 10000pF ±20% GRM022R60J103ME19# ±10% GRM022R61A471KA01# 15000pF ±20% GRM022R60J153ME15# Derating ±20% GRM022R61A471MA01# 22000pF ±10% GRM022R60J223KE15# Derating ±10% GRM022R61A681KE19# ±20% GRM022R60J223ME15# Derating ±20% GRM022R61A681ME19# 33000pF ±20% GRM022R60J333ME15# Derating ±10% GRM022R61A102KE19# 47000pF ±20% GRM022R60J473ME15# Derating ±20% GRM022R61A102ME19# 68000pF ±20% GRM022R60J683ME15# Derating 1500pF ±10% GRM022R61A152KE19# 0.1µF ±20% GRM022R60J104ME15# Derating ±20% GRM022R61A152ME19# 680pF ±20% GRM022B30J681ME19# 2200pF ±10% GRM022R61A222KE19# 1000pF ±20% GRM022B30J102ME19# ±20% GRM022R61A222ME19# 1500pF ±20% GRM022B30J152ME19# ±10% GRM022R61A332KE19# 2200pF ±20% GRM022B30J222ME19# ±20% GRM022R61A332ME19# 3300pF ±20% GRM022B30J332ME19# 4700pF ±10% GRM022R61A472KE19# 4700pF ±20% GRM022B30J472ME19# ±20% GRM022R61A472ME19# 6800pF ±20% GRM022B30J682ME19# 6800pF ±10% GRM022R61A682KE19# 10000pF ±20% GRM022B30J103ME19# ±20% GRM022R61A682ME19# X5R 15000pF ±10% GRM022R60G153KE15# ±10% GRM022R61A103KE19# ±20% GRM022R60G153ME15# ±20% GRM022R61A103ME19# 22000pF ±10% GRM022R60G223KE15# ±10% GRM022B11A680KA01# ±20% GRM022R60G223ME15# ±20% GRM022B11A680MA01# 33000pF ±10% GRM022R60G333KE15# ±10% GRM022B11A101KA01# ±20% GRM022R60G333ME15# ±20% GRM022B11A101MA01# ±10% GRM022R60G473KE15# 150pF ±10% GRM022B11A151KA01# ±20% GRM022R60G473ME15# ±20% GRM022B11A151MA01# 68000pF ±20% GRM022R60G683ME15# 220pF ±10% GRM022B11A221KA01# 0.1µF ±20% GRM022R60G104ME15# ±20% GRM022B11A221MA01# ±10% GRM022B11A331KA01# ±20% GRM022B11A331MA01# ±10% GRM022B11A471KA01# ±20% GRM022B11A471MA01# 470pF Low ESL LLp Series Tol. GRM022R71A680KA01# 330pF 68pF 100pF 150pF High-Q Type GJM Series 470pF 680pF High Frequency GQM Series 1000pF Monolithic Microchip GMA Series 3300pF 10000pF For Bonding GMD Series B Part Number Cap. ±10% 68pF 220pF X5R Tol. Rated TC Voltage Code 68pF 100pF Product Information 330pF 470pF 1000pF 3300pF 4700pF 6800pF 10000pF 6.3Vdc X5R B 4Vdc 47000pF Part number # indicates the package specification code. 64 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series High Dielectric Constant Type Part Number List GRM033R61E151KA01# For General Purpose GRM Series GRM033R61E101KA01# ±10% GRM033R71H101MA12# 330pF ±10% GRM033R61E331KA01# 150pF ±10% GRM033R71H151KA12# 470pF ±10% GRM033R61E471KA01# ±20% GRM033R71H151MA12# 680pF ±10% GRM033R61E681KA01# 220pF ±10% GRM033R71H221KA12# 1000pF ±10% GRM033R61E102KA01# ±20% GRM033R71H221MA12# 10000pF ±10% GRM033R61E103KA12# Derating ±10% GRM033R71H331KA12# ±20% GRM033R61E103MA12# Derating ±20% GRM033R71H331MA12# 100pF ±10% GRM033B11E101KA01# ±10% GRM033R71H471KA12# 150pF ±10% GRM033B11E151KA01# ±20% GRM033R71H471MA12# 220pF ±10% GRM033B11E221KA01# ±10% GRM033R71H681KA12# 330pF ±10% GRM033B11E331KA01# ±20% GRM033R71H681MA12# 470pF ±10% GRM033B11E471KA01# ±10% GRM033R71H102KA12# 680pF ±10% GRM033B11E681KA01# ±20% GRM033R71H102MA12# 1000pF ±10% GRM033B11E102KA01# ±10% GRM033R71H152KA12# ±20% GRM033B11E102MA01# ±20% GRM033R71H152MA12# 1500pF ±10% GRM033B11E152KA01# ±10% GRM033B31H101KA12# ±20% GRM033B11E152MA01# ±20% GRM033B31H101MA12# ±10% GRM033B31E222KA12# 150pF ±10% GRM033B31H151KA12# ±20% GRM033B31E222MA12# ±20% GRM033B31H151MA12# ±10% GRM033B31E332KA12# 220pF ±10% GRM033B31H221KA12# ±20% GRM033B31E332MA12# ±20% GRM033B31H221MA12# ±10% GRM033B31H331KA12# ±20% GRM033B31H331MA12# ±10% GRM033B31H471KA12# ±20% GRM033B31H471MA12# ±10% 1500pF 100pF 330pF B 2200pF 3300pF 10000pF ±10% GRM033B31E103KA12# Derating ±20% GRM033B31E103MA12# Derating ±10% GRM033R71C222KA88# X7R 2200pF 3300pF ±10% GRM033R71C332KA88# R 2200pF ±10% GRM033R11C222KA88# GRM033B31H681KA12# 3300pF ±10% GRM033R11C332KA88# ±20% GRM033B31H681MA12# X5R 10000pF ±10% GRM033R61C103KA12# ±10% GRM033B31H102KA12# ±20% GRM033R61C103MA12# ±20% GRM033B31H102MA12# 0.1µF ±10% GRM033R61C104KE84# Derating ±10% GRM033B31H152KA12# ±20% GRM033R61C104ME84# Derating ±20% GRM033B31H152MA12# 2200pF ±10% GRM033B31C222KA87# 100pF ±10% GRM033R71E101KA01# ±20% GRM033B31C222MA87# 150pF ±10% GRM033R71E151KA01# 3300pF ±10% GRM033B31C332KA87# 220pF ±10% GRM033R71E221KA01# ±20% GRM033B31C332MA87# 330pF ±10% GRM033R71E331KA01# ±10% GRM033B31C103KA12# 470pF ±10% GRM033R71E471KA01# ±20% GRM033B31C103MA12# 680pF ±10% GRM033R71E681KA01# 1000pF ±10% GRM033R71E102KA01# 1500pF ±10% GRM033R71E152KA01# 2200pF ±10% GRM033R71E222KA12# ±20% GRM033R71E222MA12# ±10% GRM033R71E332KA12# ±20% GRM033R71E332MA12# 100pF ±10% GRM033R11E101KA01# 150pF ±10% GRM033R11E151KA01# 220pF ±10% GRM033R11E221KA01# 330pF ±10% GRM033R11E331KA01# 470pF ±10% GRM033R11E471KA01# 680pF ±10% GRM033R11E681KA01# 1000pF ±10% GRM033R11E102KA01# 1500pF ±10% GRM033R11E152KA01# 470pF 680pF 1000pF 1500pF 3300pF 16Vdc Low ESL LLp Series GRM033R61E221KA01# ±20% B 10000pF ±10% GRM033B31C104KE84# Derating ±20% GRM033B31C104ME84# Derating 4700pF ±10% GRM033R71A472KA01# ±20% GRM033R71A472MA01# 6800pF ±10% GRM033R71A682KA01# ±20% GRM033R71A682MA01# ±10% GRM033R71A103KA01# ±20% GRM033R71A103MA01# ±10% GRM033R11A472KA01# ±20% GRM033R11A472MA01# ±10% GRM033R11A682KA01# ±20% GRM033R11A682MA01# ±10% GRM033R11A103KA01# ±20% GRM033R11A103MA01# ±10% GRM033R61A472KA01# 0.1µF 10Vdc X7R 10000pF R 4700pF 6800pF 10000pF X5R 4700pF Capacitor Array GNM Series ±10% 150pF ±10% 1000pF R 100pF 220pF 680pF X7R X5R GRM033R71H101KA12# 470pF 25Vdc 0.33mm 25Vdc ±10% 100pF 330pF B Part Number Part Number High-Q Type GJM Series X7R Tol. Tol. High Frequency GQM Series 0.33mm 50Vdc Cap. Cap. Monolithic Microchip GMA Series Rated TC Voltage Code Rated TC Voltage Code For Bonding GMD Series T max. T max. Ultracompact Product Information c 0.6×0.3mm Part number # indicates the package specification code. 65 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series High Dielectric Constant Type Part Number List (→ c 0.6×0.3mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.33mm 10Vdc X5R Cap. Tol. 4700pF ±20% GRM033R61A472MA01# 6800pF ±10% GRM033R61A682KA01# ±20% Tol. Part Number ±10% GRM033R70J103KA01# GRM033R10J472KA01# GRM033R61A682MA01# 6800pF ±10% GRM033R10J682KA01# ±10% GRM033R61A103KA01# 10000pF ±10% GRM033R10J103KA01# ±20% GRM033R61A103MA01# X6S 15000pF ±10% GRM033C80J153KE01# ±10% GRM033R61A123KE84# ±20% GRM033C80J153ME01# ±20% GRM033R61A123ME84# 22000pF ±10% GRM033C80J223KE01# ±10% GRM033R61A153KE84# ±20% GRM033C80J223ME01# ±20% GRM033R61A153ME84# ±10% GRM033C80J333KE01# 18000pF ±10% GRM033R61A183KE84# ±20% GRM033C80J333ME01# ±20% GRM033R61A183ME84# ±10% GRM033C80J473KE19# 22000pF ±10% GRM033R61A223KE84# ±20% GRM033C80J473ME19# ±20% GRM033R61A223ME84# ±10% GRM033R61A273KE84# ±20% GRM033R61A273ME84# 33000pF ±10% GRM033R61A333KE84# ±20% GRM033R61A333ME84# 39000pF ±10% GRM033R61A393KE84# X5R 10000pF ±20% GRM033R61A393ME84# 15000pF 47000pF ±10% GRM033R61A473KE84# ±20% GRM033R61A473ME84# ±10% GRM033R61A683KE84# ±20% GRM033R61A683ME84# ±10% GRM033R61A104KE84# ±20% GRM033R61A104ME84# 0.22µF ±20% GRM033R61A224ME90# 4700pF ±10% GRM033B11A472KA01# ±20% GRM033B11A472MA01# ±10% 15000pF Capacitor Array GNM Series 27000pF Low ESL LLp Series 68000pF High-Q Type GJM Series 0.1µF 0.33mm 6.3Vdc X7R 10000pF R 33000pF 47000pF ±10% GRM033C80J683KE84# Derating ±20% GRM033C80J683ME84# Derating ±10% GRM033C80J104KE84# Derating ±20% GRM033C80J104ME84# Derating ±20% GRM033C80J224ME90# Derating ±10% GRM033R60J103KA01# ±10% GRM033R60J153KE01# ±20% GRM033R60J153ME01# 22000pF ±10% GRM033R60J223KE01# ±20% GRM033R60J223ME01# 33000pF ±10% GRM033R60J333KE01# ±20% GRM033R60J333ME01# ±10% GRM033R60J473KE19# ±20% GRM033R60J473ME19# 68000pF 0.1µF 0.22µF 47000pF Derating High Frequency GQM Series 0.22µF ±20% GRM033R60J224ME90# 4700pF ±10% GRM033B10J472KA01# GRM033B11A682KA01# 6800pF ±10% GRM033B10J682KA01# ±20% GRM033B11A682MA01# 10000pF ±10% GRM033B10J103KA01# 10000pF ±10% GRM033B11A103KA01# 15000pF ±10% GRM033B10J153KE01# ±20% GRM033B11A103MA01# ±20% GRM033B10J153ME01# 12000pF ±10% GRM033B31A123KE84# 22000pF ±10% GRM033B10J223KE01# ±20% GRM033B31A123ME84# ±20% GRM033B10J223ME01# ±10% GRM033B31A153KE84# ±10% GRM033B10J333KE01# ±20% GRM033B31A153ME84# ±20% GRM033B10J333ME01# 18000pF ±10% GRM033B31A183KE84# 47000pF ±10% GRM033B30J473KE18# ±20% GRM033B31A183ME84# ±20% GRM033B30J473ME18# 22000pF ±10% GRM033B31A223KE84# 0.22µF ±20% GRM033C80G224ME90# ±20% GRM033B31A223ME84# ±10% GRM033B31A273KE84# ±20% GRM033B31A273ME84# ±10% GRM033B31A333KE84# Cap. Tol. ±20% GRM033B31A333ME84# ±10% GRM033B31A393KE84# 0.1µF ±10% GRM152R61A104KE19# Derating ±20% GRM033B31A393ME84# ±20% GRM152R61A104ME19# Derating ±10% GRM033B31A473KE84# ±10% GRM152R61A224KE19# Derating ±20% GRM033B31A473ME84# ±20% GRM152R61A224ME19# Derating ±10% GRM033B31A683KE84# ±10% GRM152B31A104KE19# Derating ±20% GRM033B31A683ME84# ±20% GRM152B31A104ME19# Derating ±10% GRM033B31A104KE84# ±10% GRM152B31A224KE19# Derating ±20% GRM033B31A104ME84# ±20% GRM152B31A224ME19# Derating 4700pF ±10% GRM033R70J472KA01# ±10% GRM152C80J104KE19# Derating 6800pF ±10% GRM033R70J682KA01# ±20% GRM152C80J104ME19# Derating 6800pF Monolithic Microchip GMA Series 15000pF 27000pF For Bonding GMD Series 33000pF 39000pF 47000pF Product Information 68000pF 0.1µF X7R Cap. ±10% 12000pF 6.3Vdc Rated TC Voltage Code 4700pF 10000pF B T max. Part Number B 33000pF 4Vdc X6S c 1.0×0.5mm T max. Rated TC Voltage Code 0.22mm 10Vdc X5R 0.22µF B 0.1µF 0.22µF 6.3Vdc X6S 0.1µF Part Number Part number # indicates the package specification code. 66 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series High Dielectric Constant Type Part Number List 4Vdc X7T GRM152C80J224KE19# Derating ±20% GRM152C80J224ME19# Derating ±10% GRM152R60J104KE19# ±20% GRM152R60J104ME19# 0.22µF ±10% GRM152R60J224KE19# ±20% GRM152R60J224ME19# 0.47µF ±20% GRM152R60J474ME15# 0.1µF ±10% GRM152B30J104KE19# ±20% GRM152B30J104ME19# 0.22µF ±10% GRM152B30J224KE19# ±20% GRM152B30J224ME19# 0.47µF ±20% GRM152B30J474ME15# Derating 0.1µF ±10% GRM152D70G104KE15# Derating ±20% GRM152D70G104ME15# Derating ±10% GRM152D70G224KE15# Derating ±20% GRM152D70G224ME15# Derating ±10% GRM152C80G104KE19# ±20% GRM152C80G104ME19# ±10% GRM152C80G224KE19# ±20% GRM152C80G224ME19# 0.1µF 0.22µF X6S 0.1µF 0.22µF 2.5Vdc X6T 0.47µF ±20% GRM152D80G474ME15# X7T 0.1µF ±10% GRM152D70E104KE19# ±20% GRM152D70E104ME19# ±10% GRM152D70E224KE19# ±20% 50Vdc 220pF X7R R B 16Vdc X7R GRM15XR71C332MA86# ±10% GRM15XR71C472KA86# ±20% GRM15XR71C472MA86# ±10% GRM15XR71C682KA86# ±20% GRM15XR71C682MA86# ±10% GRM15XR71C103KA86# ±20% GRM15XR71C103MA86# ±10% GRM15XB11C332KA86# ±20% GRM15XB11C332MA86# 4700pF ±10% GRM15XB11C472KA86# ±20% GRM15XB11C472MA86# 6800pF ±10% GRM15XB11C682KA86# ±20% GRM15XB11C682MA86# ±10% GRM15XB11C103KA86# ±20% GRM15XB11C103MA86# X5R 15000pF ±10% GRM15XR61A153KA86# ±20% GRM15XR61A153MA86# 22000pF ±10% GRM15XR61A223KA86# ±20% GRM15XR61A223MA86# ±10% GRM15XR61A333KA86# ±20% GRM15XR61A333MA86# 6800pF 10000pF Derating B 3300pF 10000pF 10Vdc 33000pF 1.0µF ±20% GRM153R61A105ME95# Derating ±20% GRM153B31A105ME95# Derating X6T 1.0µF ±20% GRM153D80J105ME95# Derating GRM152D70E224ME19# X5R 1.0µF ±20% GRM153R60J105ME95# ±10% GRM15XR71H221KA86# B 1.0µF ±20% GRM153B30J105ME95# 330pF ±10% GRM15XR71H331KA86# X6T 1.0µF ±20% GRM153D80G105ME95# 470pF ±10% GRM15XR71H471KA86# X5R 1.0µF ±20% GRM153R60G105ME95# 680pF ±10% GRM15XR71H681KA86# 0.55mm 100Vdc X7R 220pF ±10% GRM155R72A221KA01# 1000pF ±10% GRM15XR71H102KA86# 330pF ±10% GRM155R72A331KA01# 1500pF ±10% GRM15XR71H152KA86# 470pF ±10% GRM155R72A471KA01# 220pF ±10% GRM15XR11H221KA86# 680pF ±10% GRM155R72A681KA01# 330pF ±10% GRM15XR11H331KA86# 1000pF ±10% GRM155R72A102KA01# 470pF ±10% GRM15XR11H471KA86# 1500pF ±10% GRM155R72A152KA01# 680pF ±10% GRM15XR11H681KA86# 2200pF ±10% GRM155R72A222KA01# 1000pF ±10% GRM15XR11H102KA86# 3300pF ±10% GRM155R72A332KA01# 1500pF ±10% GRM15XR11H152KA86# 4700pF ±10% GRM155R72A472KA01# 220pF ±10% GRM15XB11H221KA86# 220pF ±10% GRM155R71H221KA01# ±20% GRM15XB11H221MA86# 330pF ±10% GRM155R71H331KA01# ±10% GRM15XB11H331KA86# 470pF ±10% GRM155R71H471KA01# ±20% GRM15XB11H331MA86# 680pF ±10% GRM155R71H681KA01# 470pF ±10% GRM15XB11H471KA86# 1000pF ±10% GRM155R71H102KA01# ±20% GRM15XB11H471MA86# 1500pF ±10% GRM155R71H152KA01# 680pF ±10% GRM15XB11H681KA86# 2200pF ±10% GRM155R71H222KA01# ±20% GRM15XB11H681MA86# 3300pF ±10% GRM155R71H332KA01# ±10% GRM15XB11H102KA86# 4700pF ±10% GRM155R71H472KA01# ±20% GRM15XB11H102MA86# 6800pF ±10% GRM155R71H682KA88# ±10% GRM15XB11H152KA86# 10000pF ±10% GRM155R71H103KA88# ±20% GRM15XB11H152MA86# 15000pF ±10% GRM155R71H153KA12# ±10% GRM15XR71E222KA86# 22000pF ±10% GRM155R71H223KA12# ±20% GRM15XR71E222MA86# 0.1µF ±10% GRM155R71H104KE14# ±10% GRM15XB11E222KA86# ±20% GRM155R71H104ME14# ±20% GRM15XB11E222MA86# ±10% GRM155C71H333KE19# ±10% GRM15XR71C332KA86# ±20% GRM155C71H333ME19# 1500pF B ±20% 4700pF 1.0µF 1000pF X7R 3300pF X7R B 330pF 25Vdc 16Vdc Part Number X5R 0.22µF 0.3mm 0.3mm Tol. Capacitor Array GNM Series ±10% Cap. Low ESL LLp Series B 0.22µF Rated TC Voltage Code 2200pF 2200pF 3300pF 0.33mm 10Vdc 6.3Vdc 4Vdc 50Vdc X7R X7S 33000pF High-Q Type GJM Series X5R Part Number High Frequency GQM Series X6S Tol. Monolithic Microchip GMA Series 0.22mm 6.3Vdc T max. Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. For General Purpose GRM Series (→ c 1.0×0.5mm) Part number # indicates the package specification code. 67 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series High Dielectric Constant Type Part Number List (→ c 1.0×0.5mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.55mm 50Vdc Cap. Part Number Rated TC Voltage Code Cap. Tol. Part Number 0.1µF ±10% GRM155B31H104KE14# ±20% GRM155B31H104ME14# 6800pF ±10% GRM155R71E682KA01# GRM155C71H473KE19# ±20% GRM155C71H473ME19# ±10% GRM155C71H683KE19# ±20% GRM155C71H683ME19# 10000pF ±10% GRM155R71E103KA01# 220pF ±10% GRM155R11H221KA01# 15000pF ±10% GRM155R71E153KA61# 330pF ±10% GRM155R11H331KA01# 22000pF ±10% GRM155R71E223KA61# 470pF ±10% GRM155R11H471KA01# 33000pF ±10% GRM155R71E333KA88# 680pF ±10% GRM155R11H681KA01# 47000pF ±10% GRM155R71E473KA88# 1000pF ±10% GRM155R11H102KA01# 0.1µF ±10% GRM155R71E104KE14# 1500pF ±10% GRM155R11H152KA01# ±20% GRM155R71E104ME14# 2200pF ±10% GRM155R11H222KA01# 6800pF ±10% GRM155R11E682KA01# 3300pF ±10% GRM155R11H332KA01# 10000pF ±10% GRM155R11E103KA01# 4700pF ±10% GRM155R11H472KA01# 15000pF ±10% GRM155R11E153KA61# 6800pF ±10% GRM155R11H682KA88# 22000pF ±10% GRM155R11E223KA61# 10000pF ±10% GRM155R11H103KA88# 33000pF ±10% GRM155R11E333KA88# 47000pF ±10% GRM155R11E473KA88# X6S 68000pF ±10% GRM155C81E683KA12# ±10% GRM155C81E104KA12# ±20% GRM155C81E104MA12# ±10% GRM155R61E683KA87# ±20% GRM155R61E683MA87# ±10% GRM155R61E104KA87# ±20% GRM155R61E104MA87# 68000pF Capacitor Array GNM Series Low ESL LLp Series 0.1µF ±10% ±20% GRM155C81H104ME14# X5R 1000pF ±10% GRM155R61H102KA01# 2200pF ±10% GRM155R61H222KA01# 4700pF ±10% GRM155R61H472KA01# 33000pF ±10% GRM155R61H333KE19# ±20% GRM155R61H333ME19# 47000pF ±10% GRM155R61H473KE19# ±20% GRM155R61H473ME19# ±10% GRM155R61H683KE19# ±20% GRM155R61H683ME19# ±10% ±20% ±10% GRM155B11H221KA01# ±20% GRM155B11H221MA01# 330pF ±10% GRM155B11H331KA01# ±20% GRM155B11H331MA01# 470pF ±10% GRM155B11H471KA01# ±20% GRM155B11H471MA01# ±10% GRM155B11H681KA01# ±20% GRM155B11H681MA01# 1000pF ±10% GRM155B11H102KA01# ±20% GRM155B11H102MA01# 1500pF ±10% GRM155B11H152KA01# ±20% GRM155B11H152MA01# ±10% GRM155B11H222KA01# ±20% GRM155B11H222MA01# ±10% GRM155B11H332KA01# ±20% GRM155B11H332MA01# ±10% ±20% High-Q Type GJM Series X6S GRM155C81H104KE14# 68000pF 0.1µF High Frequency GQM Series B T max. ±10% X7S 47000pF R Tol. 220pF Monolithic Microchip GMA Series 680pF 2200pF For Bonding GMD Series 3300pF 4700pF 6800pF Product Information 10000pF 15000pF 22000pF 0.55mm 50Vdc 25Vdc B X7R R 0.1µF X5R 68000pF 0.1µF ±10% GRM155R61E105KA12# Derating ±20% GRM155R61E105MA12# Derating 4700pF ±10% GRM155B11E472KA01# GRM155R61H104KE14# 6800pF ±10% GRM155B11E682KA01# GRM155R61H104ME14# 10000pF ±10% GRM155B11E103KA01# ±20% GRM155B11E103MA01# ±10% GRM155B11E153KA61# ±20% GRM155B11E153MA61# ±10% GRM155B11E223KA61# ±20% GRM155B11E223MA61# ±10% GRM155B31E333KA87# ±20% GRM155B31E333MA87# ±10% GRM155B31E473KA87# ±20% GRM155B31E473MA87# ±10% GRM155B31E683KA87# ±20% GRM155B31E683MA87# ±10% GRM155B31E104KA87# ±20% GRM155B31E104MA87# ±10% GRM155B31E105KA12# Derating Derating 1.0µF B 15000pF 22000pF 33000pF 47000pF 68000pF 0.1µF 1.0µF ±20% GRM155B31E105MA12# X7R 33000pF ±10% GRM155R71C333KA01# GRM155B11H472KA01# 47000pF ±10% GRM155R71C473KA01# GRM155B11H472MA01# 68000pF ±10% GRM155R71C683KA88# ±10% GRM155B31H682KA88# 0.15µF ±10% GRM155R71C154KA12# ±20% GRM155B31H682MA88# ±10% GRM155B31H103KA88# ±20% 16Vdc 0.22µF ±10% GRM155R71C224KA12# 33000pF ±10% GRM155R11C333KA01# GRM155B31H103MA88# 47000pF ±10% GRM155R11C473KA01# ±10% GRM155B31H153KA12# 68000pF ±10% GRM155R11C683KA88# ±20% GRM155B31H153MA12# X5R 33000pF ±10% GRM155R61C333KA01# ±10% GRM155B31H223KA12# 47000pF ±10% GRM155R61C473KA01# ±20% GRM155B31H223MA12# 68000pF ±10% GRM155R61C683KA88# R Part number # indicates the package specification code. 68 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series High Dielectric Constant Type Part Number List (→ c 1.0×0.5mm) 33000pF ±10% GRM155B11C333KA01# 47000pF ±10% GRM155B11C473KA01# 68000pF ±10% GRM155B31C683KA87# 1.0µF ±10% GRM155B31C105KA12# ±20% GRM155B31C105MA12# ±10% GRM155R71A683KA01# ±20% GRM155R71A683MA01# X7R 68000pF B ±10% GRM155R11A683KA01# ±20% GRM155R11A683MA01# X6S 1.0µF ±10% GRM155C81A105KA12# ±20% GRM155C81A105MA12# ±10% GRM155R61A154KE19# ±20% GRM155R61A154ME19# 0.22µF ±10% GRM155R61A224KE19# ±20% GRM155R61A224ME19# 0.33µF ±10% GRM155R61A334KE15# ±20% GRM155R61A334ME15# ±10% GRM155R61A474KE15# ±20% GRM155R61A474ME15# ±10% GRM155R61A684KE15# ±20% GRM155R61A684ME15# ±10% GRM155R61A225KE95# Derating ±20% GRM155R61A225ME95# Derating 0.15µF ±10% GRM155B31A154KE18# ±20% GRM155B31A154ME18# 0.22µF ±10% GRM155B31A224KE18# ±20% GRM155B31A224ME18# ±10% GRM155B31A334KE14# ±20% GRM155B31A334ME14# 0.47µF ±10% GRM155B31A474KE14# ±20% GRM155B31A474ME14# 0.68µF ±10% GRM155B31A684KE15# ±20% GRM155B31A684ME15# 2.2µF ±10% GRM155B31A225KE95# Derating ±20% GRM155B31A225ME95# Derating ±10% GRM155R70J105KA12# Derating ±20% GRM155R70J105MA12# Derating ±10% GRM155C80J154KE01# ±20% GRM155C80J154ME01# ±10% GRM155C80J224KE01# ±20% GRM155C80J224ME01# T max. ±10% GRM155C80J334KE01# 0.5mm ±20% GRM155C80J334ME01# ±10% GRM155C80J474KE19# ±20% GRM155C80J474ME19# ±10% GRM155C80J225KE95# Derating ±20% GRM155C80J225ME95# Derating ±10% GRM155R60J154KE01# ±20% GRM155R60J154ME01# ±10% GRM155R60J224KE01# ±20% ±10% 0.47µF 0.68µF 2.2µF B 0.33µF X7R X6S 1.0µF 0.15µF 0.22µF 0.33µF 0.47µF 2.2µF X5R 0.15µF 0.22µF 0.33µF 0.33µF ±20% GRM155R60J334ME01# 0.47µF ±10% GRM155R60J474KE19# ±20% GRM155R60J474ME19# ±10% GRM155R60J684KE19# ±20% GRM155R60J684ME19# ±10% GRM155R60J225KE95# ±20% GRM155R60J225ME95# ±10% GRM155B10J154KE01# ±20% GRM155B10J154ME01# 0.22µF ±10% GRM155B10J224KE01# ±20% GRM155B10J224ME01# 0.33µF ±10% GRM155B10J334KE01# ±20% GRM155B10J334ME01# ±10% GRM155B30J474KE18# ±20% GRM155B30J474ME18# 0.68µF ±10% GRM155B30J684KE18# ±20% GRM155B30J684ME18# 2.2µF ±10% GRM155B30J225KE95# ±20% GRM155B30J225ME95# ±10% GRM155R70G105KA12# ±20% GRM155R70G105MA12# ±10% GRM155C80G154KE01# ±20% GRM155C80G154ME01# ±10% GRM155C80G224KE01# ±20% GRM155C80G224ME01# 0.33µF ±10% GRM155C80G334KE01# ±20% GRM155C80G334ME01# 0.47µF ±10% GRM155C80G474KE01# ±20% GRM155C80G474ME01# ±10% GRM155D80G225KE95# ±20% GRM155D80G225ME95# ±20% GRM155R60J475ME47# Derating Derating 2.2µF 68000pF 0.15µF X5R 0.68µF R X5R 6.3Vdc 0.55mm 6.3Vdc 0.15µF 0.47µF 4Vdc X7R X6S 1.0µF 0.15µF 0.22µF X6T 0.6mm 6.3Vdc X5R Part Number 2.2µF 4.7µF For General Purpose GRM Series GRM155R61C105MA12# Tol. Capacitor Array GNM Series GRM155R61C105KA12# ±20% Cap. Low ESL LLp Series 10Vdc ±10% Rated TC Voltage Code High-Q Type GJM Series B 1.0µF T max. Part Number B 4.7µF ±20% GRM155B30J475ME47# 4Vdc X5R 4.7µF ±20% GRM155R60G475ME47# B 4.7µF ±20% GRM155B30G475ME47# 2.5Vdc X6T 4.7µF ±20% GRM155D80E475ME47# 4Vdc X5R 10µF ±20% GRM155R60G106ME44# 2.5Vdc X5R 10µF ±20% GRM155R60E106ME16# Cap. Tol. 1.0µF ±10% GRM185R61E105KA12# Derating ±20% GRM185R61E105MA12# Derating ±10% GRM185B31E105KA12# Derating ±20% GRM185B31E105MA12# Derating ±10% GRM185R61C105KE44# ±20% GRM185R61C105ME44# ±10% GRM185B31C105KE43# ±20% GRM185B31C105ME43# 220pF ±10% GRM188R72A221KA01# GRM155R60J224ME01# 330pF ±10% GRM188R72A331KA01# GRM155R60J334KE01# 470pF ±10% GRM188R72A471KA01# 0.7mm Derating c 1.6×0.8mm Rated TC Voltage Code 25Vdc X5R B 16Vdc X5R B 0.9mm 100Vdc X7R 1.0µF 1.0µF 1.0µF High Frequency GQM Series X5R Tol. Monolithic Microchip GMA Series 0.55mm 16Vdc Cap. Part Number For Bonding GMD Series Rated TC Voltage Code Product Information T max. Part number # indicates the package specification code. 69 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series High Dielectric Constant Type Part Number List (→ c 1.6×0.8mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.9mm 100Vdc X7R Cap. Tol. Capacitor Array GNM Series 680pF ±10% GRM188R72A681KA01# 1000pF ±10% GRM188R72A102KA01# 1500pF ±10% GRM188R72A152KA01# 2200pF ±10% GRM188R72A222KA01# 3300pF ±10% GRM188R72A332KA01# 4700pF ±10% GRM188R72A472KA01# 6800pF ±10% GRM188R72A682KA01# 10000pF ±10% GRM188R72A103KA01# 15000pF ±10% GRM188R72A153KAC4# ±20% GRM188R72A153MAC4# ±10% GRM188R72A223KAC4# ±20% GRM188R72A223MAC4# 0.1µF ±10% GRM188R72A104KA35# 220pF ±10% GRM188R71H221KA01# 330pF ±10% GRM188R71H331KA01# 470pF ±10% GRM188R71H471KA01# 22000pF 50Vdc X7R Low ESL LLp Series High-Q Type GJM Series High Frequency GQM Series R Monolithic Microchip GMA Series For Bonding GMD Series X5R Part Number Product Information 680pF ±10% GRM188R71H681KA01# 1000pF ±10% GRM188R71H102KA01# 1500pF ±10% GRM188R71H152KA01# 2200pF ±10% GRM188R71H222KA01# 3300pF ±10% GRM188R71H332KA01# 4700pF ±10% GRM188R71H472KA01# 6800pF ±10% GRM188R71H682KA01# 10000pF ±10% GRM188R71H103KA01# 15000pF ±10% GRM188R71H153KA01# 22000pF ±10% GRM188R71H223KA01# 33000pF ±10% GRM188R71H333KA61# 47000pF ±10% GRM188R71H473KA61# 68000pF ±10% GRM188R71H683KA93# 0.1µF ±10% GRM188R71H104KA93# 220pF ±10% GRM188R11H221KA01# 330pF ±10% GRM188R11H331KA01# 470pF ±10% GRM188R11H471KA01# 680pF ±10% GRM188R11H681KA01# 1000pF ±10% GRM188R11H102KA01# 1500pF ±10% GRM188R11H152KA01# 2200pF ±10% GRM188R11H222KA01# 3300pF ±10% GRM188R11H332KA01# 4700pF ±10% GRM188R11H472KA01# 6800pF ±10% GRM188R11H682KA01# 10000pF ±10% GRM188R11H103KA01# 15000pF ±10% GRM188R11H153KA01# 22000pF ±10% GRM188R11H223KA01# 33000pF ±10% GRM188R11H333KA61# 47000pF ±10% GRM188R11H473KA61# 68000pF ±10% GRM188R11H683KA93# 0.1µF ±10% GRM188R11H104KA93# 1000pF ±10% 2200pF ±10% 4700pF T max. 0.9mm Rated TC Voltage Code 50Vdc X5R B Cap. Tol. 0.47µF ±20% GRM188R61H474MA12# 1.0µF ±10% GRM188R61H105KAAL# ±20% GRM188R61H105MAAL# ±10% GRM188B11H221KA01# ±20% GRM188B11H221MA01# ±10% GRM188B11H331KA01# ±20% GRM188B11H331MA01# ±10% GRM188B11H471KA01# ±20% GRM188B11H471MA01# 680pF ±10% GRM188B11H681KA01# ±20% GRM188B11H681MA01# 1000pF ±10% GRM188B11H102KA01# ±20% GRM188B11H102MA01# ±10% GRM188B11H152KA01# ±20% GRM188B11H152MA01# 2200pF ±10% GRM188B11H222KA01# ±20% GRM188B11H222MA01# 3300pF ±10% GRM188B11H332KA01# ±20% GRM188B11H332MA01# ±10% GRM188B11H472KA01# ±20% GRM188B11H472MA01# ±10% GRM188B11H682KA01# ±20% GRM188B11H682MA01# ±10% GRM188B11H103KA01# ±20% GRM188B11H103MA01# 15000pF ±10% GRM188B11H153KA01# ±20% GRM188B11H153MA01# 22000pF ±10% GRM188B11H223KA01# ±20% GRM188B11H223MA01# ±10% GRM188B11H333KA61# ±20% GRM188B11H333MA61# ±10% GRM188B11H473KA61# ±20% GRM188B11H473MA61# ±10% GRM188B31H683KA92# ±20% GRM188B31H683MA92# ±10% GRM188B31H104KA92# ±20% GRM188B31H104MA92# ±10% GRM188B31H154KAC4# ±20% GRM188B31H154MAC4# ±10% GRM188B31H224KAC4# ±20% GRM188B31H224MAC4# ±10% GRM188B31H105KAAL# 220pF 330pF 470pF 1500pF 4700pF 6800pF 10000pF 33000pF 47000pF 68000pF 0.1µF 0.15µF 0.22µF 1.0µF Part Number ±20% GRM188B31H105MAAL# X7R 15000pF ±10% GRM188R71E153KA01# 22000pF ±10% GRM188R71E223KA01# ±20% GRM188R71E223MA01# 33000pF ±10% GRM188R71E333KA01# GRM188R61H102KA01# 47000pF ±10% GRM188R71E473KA01# GRM188R61H222KA01# 68000pF ±10% GRM188R71E683KA01# ±10% GRM188R61H472KA01# 0.15µF ±10% GRM188R71E154KA01# 10000pF ±10% GRM188R61H103KA01# 0.22µF ±10% GRM188R71E224KA88# 22000pF ±10% GRM188R61H223KA01# 0.47µF ±10% GRM188R71E474KA12# 0.22µF ±10% GRM188R61H224KAC4# 1.0µF ±10% GRM188R71E105KA12# 0.47µF ±10% GRM188R61H474KA12# ±20% GRM188R71E105MA12# 25Vdc Part number # indicates the package specification code. 70 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series High Dielectric Constant Type Part Number List (→ c 1.6×0.8mm) ±20% GRM188R71C105MA12# ±20% GRM188R71C105ME15# GRM188R11E153KA01# GRM188R11E223KA01# ±20% GRM188R11E223MA01# X7S 0.68µF ±10% GRM188C71C684KA12# 33000pF ±10% GRM188R11E333KA01# R 0.15µF ±10% GRM188R11C154KA01# 47000pF ±10% GRM188R11E473KA01# 0.22µF ±10% GRM188R11C224KA01# 68000pF ±10% GRM188R11E683KA01# 0.33µF ±10% GRM188R11C334KA01# 0.15µF ±10% GRM188R11E154KA01# 0.47µF ±10% GRM188R11C474KA88# 0.22µF ±10% GRM188R11E224KA88# 1.0µF ±10% GRM188C81C105KA12# 1.0µF ±10% GRM188C81E105KAAD# ±20% GRM188C81C105MA12# ±20% GRM188C81E105MAAD# 2.2µF ±10% GRM188C81C225KA12# ±20% GRM188C81C225MA12# 0.22µF ±10% GRM188R61C224KA88# 0.68µF ±10% GRM188R61C684KA75# ±20% GRM188R61C684MA75# 0.9mm 16Vdc X7R X6S 0.1µF ±10% GRM188R61E104KA01# 0.22µF ±10% GRM188R61E224KA88# 0.47µF ±10% GRM188R61E474KA12# ±20% GRM188R61E474MA12# ±10% GRM188R61E684KA75# 1.0µF ±10% GRM188R61C105KA93# ±20% GRM188R61E684MA75# 2.2µF ±10% GRM188R61C225KE15# ±10% GRM188R61E105KA12# 0.15µF ±10% GRM188B11C154KA01# ±20% GRM188R61E105MA12# 0.22µF ±10% GRM188B11C224KA01# ±10% GRM188R61E225KA12# 0.33µF ±10% GRM188B11C334KA01# ±20% GRM188R61E225MA12# ±20% GRM188B11C334MA01# 2200pF ±10% GRM188B11E222KA01# 0.68µF ±10% GRM188B31C684KA75# 3300pF ±10% GRM188B11E332KA01# ±20% GRM188B31C684MA75# 4700pF ±10% GRM188B11E472KA01# 1.0µF ±10% GRM188B31C105KA92# 6800pF ±10% GRM188B11E682KA01# ±20% GRM188B31C105MA92# 10000pF ±10% GRM188B11E103KA01# 2.2µF ±10% GRM188B31C225KE14# ±20% GRM188B11E103MA01# 0.33µF ±10% GRM188R71A334KA61# ±10% GRM188B11E153KA01# ±20% GRM188R71A334MA61# ±20% GRM188B11E153MA01# 0.47µF ±10% GRM188R71A474KA61# ±10% GRM188B11E223KA01# 0.68µF ±10% GRM188R71A684KA61# ±20% GRM188B11E223MA01# ±20% GRM188R71A684MA61# 33000pF ±10% GRM188B11E333KA01# 2.2µF ±10% GRM188R71A225KE15# ±20% GRM188B11E333MA01# ±20% GRM188R71A225ME15# 47000pF ±10% GRM188B11E473KA01# 2.2µF ±10% GRM188D71A225KE34# ±20% GRM188B11E473MA01# ±20% GRM188D71A225ME34# ±10% GRM188B11E683KA01# ±10% GRM188C81A225KE34# ±20% GRM188B11E683MA01# ±20% GRM188C81A225ME34# 0.1µF ±10% GRM188B11E104KA01# 0.33µF ±10% GRM188R61A334KA61# ±20% GRM188B11E104MA01# ±20% GRM188R61A334MA61# 0.15µF ±10% GRM188B11E154KA01# 0.68µF ±10% GRM188R61A684KA61# 0.22µF ±10% GRM188B31E224KA87# ±20% GRM188R61A684MA61# 0.47µF ±10% GRM188B31E474KA75# ±10% GRM188R61A225KE34# ±20% GRM188B31E474MA75# ±20% GRM188R61A225ME34# ±10% GRM188B31E684KA75# ±10% GRM188B11A334KA61# ±20% GRM188B31E684MA75# ±20% GRM188B11A334MA61# ±10% GRM188B31E105KA75# ±10% GRM188B11A684KA61# ±20% GRM188B31E105MA75# ±20% GRM188B11A684MA61# ±10% GRM188B31E225KA12# 2.2µF ±10% GRM188B31A225KE33# ±20% GRM188B31A225ME33# 1.0µF ±10% GRM188R70J105KA01# ±20% GRM188R70J105MA01# ±10% GRM188C70J225KE20# ±20% GRM188C70J225ME20# ±10% GRM188C80J225KE19# ±20% GRM188C80J225ME19# 15000pF 22000pF 68000pF 0.68µF 1.0µF 2.2µF ±20% GRM188B31E225MA12# 0.15µF ±10% GRM188R71C154KA01# 0.22µF ±10% GRM188R71C224KA01# 0.33µF ±10% GRM188R71C334KA01# 0.47µF ±10% GRM188R71C474KA88# 1.0µF ±10% GRM188R71C105KA12# ±10% GRM188R71C105KE15# X5R B 10Vdc X7R X7T X6S X5R 2.2µF 2.2µF B 0.33µF 0.68µF 6.3Vdc X7R X7S X6S 2.2µF 2.2µF Capacitor Array GNM Series 1.0µF ±10% For General Purpose GRM Series Part Number ±10% 2.2µF X7R Tol. 15000pF 1.0µF 16Vdc Cap. 22000pF 0.68µF B Rated TC Voltage Code Low ESL LLp Series X5R T max. High-Q Type GJM Series X6S Part Number High Frequency GQM Series R Tol. Monolithic Microchip GMA Series 25Vdc Cap. For Bonding GMD Series 0.9mm Rated TC Voltage Code Product Information T max. Part number # indicates the package specification code. 71 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series High Dielectric Constant Type Part Number List (→ c 1.6×0.8mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.9mm 6.3Vdc X6S T max. Cap. Tol. Part Number 4.7µF ±10% GRM188C80J475KE15# Derating ±20% GRM188C80J475ME15# Derating Capacitor Array GNM Series X5R 10µF ±20% GRM188R60J106ME47# B 10µF ±20% GRM188B30J106ME47# X6S 4.7µF ±10% GRM188C80G475KE19# ±20% GRM188C80G475ME19# 10µF ±20% GRM188C80G106ME47# X5R 10µF ±20% GRM188R60G106ME47# B 10µF ±20% GRM188B30G106ME46# 2.5Vdc X6S 10µF ±20% GRM188C80E106ME47# 0.95mm 25Vdc X5R 4.7µF ±10% GRM188R61E475KE11# 16Vdc X5R 4.7µF ±10% GRM188R61C475KAAJ# Derating ±20% GRM188R61C475MAAJ# Derating ±10% GRM188B31C475KAAJ# Derating ±20% GRM188B31C475MAAJ# Derating Derating 4Vdc B Low ESL LLp Series 1mm 4.7µF 10Vdc B 10µF ±20% GRM188B31A106ME69# 35Vdc X5R 4.7µF ±10% GRM188R6YA475KE15# ±20% GRM188R6YA475ME15# ±10% GRM188R61E475KE15# ±20% GRM188R61E475ME15# 10µF ±20% GRM188R61E106MA73# 25Vdc 16Vdc High-Q Type GJM Series 10Vdc 6.3Vdc High Frequency GQM Series 4Vdc X5R 4.7µF X6S 10µF ±20% GRM188C81C106MA73# X5R 10µF ±20% GRM188R61C106MA73# X7T 10µF ±20% GRM188D71A106MA73# Rated TC Voltage Code 0.95mm 50Vdc B Monolithic Microchip GMA Series 0.7mm 0.33µF ±20% GRM219B31H334MA87# 1.0µF ±10% GRM219B31H105KA73# ±20% GRM219B31H105MA73# ±10% GRM219B31H225KE15# ±20% GRM219B31H225ME15# 35Vdc X6S ±10% GRM219C8YA225KE15# ±20% GRM219C8YA225ME15# 2.2µF Derating ±10% GRM219R6YA475KA73# Derating ±20% GRM219R6YA475MA73# Derating ±10% GRM219R71E683KA01# ±10% GRM219R71E104KA01# ±20% GRM219R71E104MA01# 0.68µF ±10% GRM219R71E684KA88# 1.0µF ±10% GRM219R71E105KA88# R 68000pF ±10% GRM219R11E683KA01# X6S 2.2µF ±10% GRM219C81E225KE15# ±20% GRM219C81E225ME15# X5R 2.2µF ±10% GRM219R61E225KA12# ±20% GRM219R61E225MA12# ±10% GRM219R61E475KA73# ±20% GRM219R61E475MA73# X5R 25Vdc Part Number 4.7µF X7R 68000pF 0.1µF 4.7µF 10µF B 0.47µF ±10% GRM219R61E106KA12# Derating ±20% GRM219R61E106MA12# Derating ±10% GRM219B31E474KA88# X6S 10µF ±20% GRM188C81A106MA73# 0.68µF ±10% GRM219B31E684KA88# X7T 10µF ±20% GRM188D70J106MA73# 1.0µF ±10% GRM219B31E105KA88# X5R 22µF ±20% GRM188R60J226MEA0# Derating 2.2µF ±10% GRM219B31E225KA75# B 22µF ±20% GRM188B30J226MEA0# Derating ±20% GRM219B31E225MA75# X6S 22µF ±20% GRM188C80G226MEA0# Derating X5R 22µF ±20% GRM188R60G226MEA0# B 22µF ±20% GRM188B30G226MEA0# Rated TC Voltage Code 25Vdc X5R 16Vdc X6S Cap. 1.0µF Tol. 16Vdc Part Number ±10% GRM216R61E105KA12# ±10% GRM219B31E106KA12# Derating ±20% GRM219B31E106MA12# Derating ±10% GRM219R71C334KA88# 0.68µF ±10% GRM219R71C684KA01# 2.2µF ±10% GRM219R71C225KE15# ±20% GRM219R71C225ME15# 10µF X7R 0.33µF R 0.68µF ±10% GRM219R11C684KA01# X6S 4.7µF ±10% GRM219C81C475KA73# ±20% GRM219C81C475MA73# 4.7µF ±10% GRM219R61C475KE15# 10µF ±10% GRM219R61C106KA73# ±20% GRM219R61C106MA73# 0.68µF ±10% GRM219B11C684KA01# 1.0µF ±10% GRM216C81C105KA12# 6800pF ±10% GRM219R72A682KA01# 10000pF ±10% GRM219R72A103KA01# ±20% GRM219R72A103MA01# X7R 10000pF ±10% GRM219R71H103KA01# 4.7µF ±10% GRM219B31C475KE15# ±20% GRM219R71H103MA01# 10µF ±10% GRM219B31C106KA73# 15000pF ±10% GRM219R71H153KA01# ±20% GRM219B31C106MA73# ±20% GRM219R71H153MA01# ±10% GRM219R71A225KE15# 33000pF ±10% GRM219R71H333KA01# ±20% GRM219R71A225ME15# 0.33µF ±10% GRM219R71H334KA88# ±10% GRM219D71A475KE15# Derating R 33000pF ±10% GRM219R11H333KA01# ±20% GRM219D71A475ME15# Derating X5R 1.0µF ±10% GRM219R61H105KA73# X5R 22µF ±20% GRM219R61A226MEA0# Derating ±20% GRM219R61H105MA73# B 22µF ±20% GRM219B31A226MEA0# Derating ±10% GRM219R61H225KE15# X6S 10µF ±10% GRM219C80J106KE39# ±20% GRM219R61H225ME15# ±20% GRM219C80J106ME39# 33000pF ±10% GRM219B11H333KA01# X5R 22µF ±20% GRM219R60J226ME47# Derating 0.33µF ±10% GRM219B31H334KA87# B 22µF ±20% GRM219B30J226ME47# Derating 0.95mm 100Vdc X7R 50Vdc Tol. 2.2µF c 2.0×1.25mm T max. Cap. For Bonding GMD Series Product Information 2.2µF B X5R B 10Vdc X7R X7T 6.3Vdc 2.2µF 4.7µF Part number # indicates the package specification code. 72 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series High Dielectric Constant Type Part Number List 47µF ±20% GRM219R60G476ME44# GRM21BB11E154KA01# 0.22µF ±10% 0.22µF ±10% GRM21BB11E224KA01# GRM21AR72A224KAC5# 0.33µF ±10% 0.33µF GRM21BB11E334KA01# ±10% GRM21AR72A334KAC5# 2.2µF ±10% GRM21BB31E225KA75# ±10% GRM219R71H223KA17# ±20% GRM21BB31E225MA75# ±20% GRM219R71H223MA17# 4.7µF ±10% GRM21BB31E475KA75# 1.35mm 100Vdc X7R 10000pF ±10% GRM21BR72A103KA01# ±20% GRM21BB31E475MA75# 15000pF ±10% GRM21BR72A153KA01# ±10% GRM21BR71C225KA12# 22000pF ±10% GRM21BR72A223KA01# ±20% GRM21BR71C225MA12# 33000pF ±10% GRM21BR72A333KA01# X6S 4.7µF ±10% GRM21BC81C475KA88# 47000pF ±10% GRM21BR72A473KA01# X5R 2.2µF ±10% GRM21BR61C225KA88# 68000pF ±10% GRM21BR72A683KAC4# 4.7µF ±10% GRM21BR61C475KA88# ±20% GRM21BR72A683MAC4# 10µF ±10% GRM21BR61C106KE15# ±10% GRM21BR72A104KAC4# ±20% GRM21BR61C106ME15# ±20% GRM21BR72A104MAC4# ±10% GRM21BB31C225KA87# X7R 47000pF ±10% GRM21BR71H473KA01# 4.7µF ±10% GRM21BB31C475KA87# 68000pF ±10% GRM21BR71H683KA01# 10µF ±10% GRM21BB31C106KE15# 0.1µF ±10% GRM21BR71H104KA01# ±20% GRM21BB31C106ME15# ±20% GRM21BR71H104MA01# ±10% GRM21BC81A106KE18# 0.15µF ±10% GRM21BR71H154KA01# ±20% GRM21BC81A106ME18# 0.22µF ±10% GRM21BR71H224KA01# ±10% GRM21BC80J106KE19# 0.47µF ±10% GRM21BR71H474KA88# ±20% GRM21BC80J106ME19# 1.0µF ±10% GRM21BR71H105KA12# 0.47µF ±10% GRM21BR72A474KA73# 47000pF ±10% GRM21BR11H473KA01# 2.2µF ±10% GRM21BR61H225KA73# 68000pF ±10% GRM21BR11H683KA01# ±20% GRM21BR61H225MA73# 0.1µF ±10% GRM21BR11H104KA01# ±10% GRM21BR61H475KE51# ±20% GRM21BR11H104MA01# ±20% GRM21BR61H475ME51# ±10% GRM21BB31H225KA73# ±20% GRM21BB31H225MA73# 4.7µF ±10% GRM21BB31H475KE51# ±20% GRM21BB31H475ME51# 1.0µF ±10% GRM21BR71E105KA99# 2.2µF ±10% GRM21BR71E225KA73# X7R 22000pF 0.1µF 50Vdc R Derating 16Vdc X7R B 10Vdc 6.3Vdc X6S X6S 1.4mm 100Vdc X7R 50Vdc X5R 2.2µF 2.2µF 10µF 10µF 4.7µF X5R 1.0µF ±10% GRM21BR61H105KA12# B 47000pF ±10% GRM21BB11H473KA01# 68000pF ±10% GRM21BB11H683KA01# 0.1µF ±10% GRM21BB11H104KA01# ±20% GRM21BB11H104MA01# ±10% GRM21BB31H154KA88# ±20% GRM21BB31H154MA88# R 1.0µF ±10% GRM21BR11E105KA99# ±10% GRM21BB31H224KA88# X5R 10µF ±10% GRM21BR61E106KA73# ±20% GRM21BB31H224MA88# ±20% GRM21BR61E106MA73# ±10% GRM21BB31H474KA87# 1.0µF ±10% GRM21BB31E105KA98# ±20% GRM21BB31H474MA87# 10µF ±10% GRM21BB31E106KA73# ±10% GRM21BB31H684KAC4# ±20% GRM21BB31E106MA73# ±20% GRM21BB31H684MAC4# ±10% GRM21BR71C475KA73# 1.0µF ±10% GRM21BB31H105KA12# ±20% GRM21BR71C475MA73# ±20% GRM21BB31H105MA12# ±10% GRM21BC81C106KA73# 0.1µF ±10% GRM21BR71E104KA01# ±20% GRM21BC81C106MA73# 0.15µF ±10% GRM21BR71E154KA01# ±10% GRM21BR71A475KA73# 0.1µF ±10% GRM21BR11E104KA01# ±20% GRM21BR71A475MA73# 0.15µF ±10% GRM21BR11E154KA01# 10µF ±10% GRM21BR71A106KE51# ±20% GRM21BR11E154MA01# ±20% GRM21BR71A106ME51# 0.68µF ±10% GRM21BR11E684KA88# B 22µF ±20% GRM21BB31A226ME51# X6S 4.7µF ±10% GRM21BC81E475KA12# X7R 10µF ±10% GRM21BR70J106KE76# ±20% GRM21BC81E475MA12# ±20% GRM21BR70J106ME76# X5R 2.2µF ±10% GRM21BR61E225KA12# X6S 22µF ±20% GRM21BC80J226ME51# ±20% GRM21BR61E225MA12# X5R 22µF ±20% GRM21BR60J226ME39# ±10% GRM21BR61E475KA12# B 22µF ±20% GRM21BB30J226ME38# 0.15µF 0.22µF 0.47µF 0.68µF 25Vdc 1.35mm 25Vdc X7R R 4.7µF B 25Vdc X7R B 16Vdc X7R X6S 10Vdc 6.3Vdc X7R 2.2µF 4.7µF 10µF 4.7µF Capacitor Array GNM Series GRM21BR61E475MA12# ±10% 50Vdc GRM219C80G106ME19# Low ESL LLp Series ±20% 0.15µF 100Vdc X7R GRM219C80G106KE19# ±20% High-Q Type GJM Series 4.7µF B 1mm ±10% High Frequency GQM Series X5R X5R 10µF Monolithic Microchip GMA Series Part Number X6S Part Number Rated TC Voltage Code Tol. 4Vdc Tol. T max. Cap. 0.95mm Cap. For Bonding GMD Series Rated TC Voltage Code Derating Derating Part number # indicates the package specification code. 73 Product Information T max. For General Purpose GRM Series (→ c 2.0×1.25mm) C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series High Dielectric Constant Type Part Number List (→ c 2.0×1.25mm) T max. Rated TC Voltage Code T max. For General Purpose GRM Series Cap. Tol. Part Number X7U 22µF ±20% GRM21BE70G226ME51# X6S 22µF ±20% GRM21BC80G226ME39# 1.45mm 25Vdc X5R 22µF ±20% GRM21BR61E226ME44# 6.3Vdc X5R 47µF ±20% GRM21BR60J476ME15# Derating B 47µF ±20% GRM21BB30J476ME15# Derating Derating 1.4mm 4Vdc 4Vdc X6S 47µF ±20% GRM21BC80G476ME15# X5R 47µF ±20% GRM21BR60G476ME15# B 47µF ±20% GRM21BB30G476ME15# Rated TC Voltage Code 1.25mm 16Vdc Capacitor Array GNM Series 0.7mm Rated TC Voltage Code 25Vdc Low ESL LLp Series 16Vdc Cap. Tol. High-Q Type GJM Series 10µF ±10% GRM31MC81C106KA12# B 0.68µF ±10% GRM31MB11C684KA01# 0.47µF ±10% GRM31MR72A474KA35# ±20% GRM31MR72A474MA35# 0.68µF ±10% GRM31MR72A684KA35# 25Vdc 2.2µF ±10% GRM31MB31E225KA92# 1.0µF ±10% GRM31CR72A105KA01# 2.2µF ±10% GRM31CR71H225KA88# 4.7µF ±10% GRM31CR71H475KA12# X5R 2.2µF ±10% GRM31CR61H225KA88# B 2.2µF ±10% GRM31CB31H225KA87# ±20% GRM31CB31H225MA87# ±10% GRM31CB31H475KA12# ±20% GRM31CB31H475MA12# 4.7µF ±10% GRM31CR71E475KA88# 10µF ±10% GRM31CR71E106KA12# ±20% GRM31CR71E106MA12# 10µF ±10% GRM31CC81E106KE15# ±20% GRM31CC81E106MA12# 10µF ±10% GRM31CR61E106KA12# 22µF ±20% GRM31CR61E226ME15# 10µF ±10% GRM31CB31E106KA75# 22µF ±20% GRM31CB31E226ME15# 4.7µF ±20% GRM31CR71C475MA01# 10µF ±10% GRM31CR71C106KAC7# ±20% GRM31CR71C106MAC7# B 1.8mm 100Vdc X7R 50Vdc 2.2µF ±10% GRM316R61E225KA12# B 2.2µF ±10% GRM316B31E225KA75# ±10% GRM316C81C225KA12# 2.2µF ±10% GRM319R72A153KA01# 0.1µF ±10% GRM319R72A104KA01# 25Vdc X7R X7R X6S 50Vdc X7R 0.33µF ±10% GRM319R71H334KA01# 35Vdc X5R 10µF ±10% GRM319R6YA106KA12# Derating ±20% GRM319R6YA106MA12# Derating 16Vdc X6S 4.7µF 0.95mm 100Vdc X7R 15000pF 25Vdc Part Number Part Number X5R X6S Tol. 1.3mm 100Vdc X7R c 3.2×1.6mm T max. Cap. X5R High Frequency GQM Series X7R 0.33µF ±10% GRM319R71E334KA01# R 0.33µF ±10% GRM319R11E334KA01# B 0.33µF ±10% GRM319B11E334KA01# 0.68µF ±10% GRM319B11E684KA01# X6S 4.7µF ±10% GRM319C81C475KA12# X5R 10µF ±10% GRM319R61C106KE15# R 4.7µF ±20% GRM31CR11C475MA01# ±20% GRM319R61C106ME15# X6S 22µF ±20% GRM31CC81C226ME15# 0.47µF ±10% GRM319B11C474KA01# X5R 10µF ±10% GRM31CR61C106KA88# 10µF ±10% GRM319B31C106KE15# 22µF ±20% GRM31CR61C226ME15# ±20% GRM319B31C106ME15# 10µF ±10% GRM31CB31C106KA88# B 22µF ±20% GRM319R61A226ME15# B 22µF ±20% GRM319B31A226ME15# X6S 22µF ±20% X5R 22µF B 22µF 16Vdc X7R B 22µF ±20% GRM31CB31C226ME15# X7R 22µF ±20% GRM31CR71A226ME15# GRM319C80J226ME15# X6S 22µF ±20% GRM31CC81A226ME19# ±20% GRM319R60J226ME15# X5R 22µF ±20% GRM31CR61A226ME19# ±20% GRM319B30J226ME15# 47µF ±20% GRM31CR61A476ME15# 1.25mm 100Vdc X7R 22000pF ±10% GRM31MR72A223KA01# 22µF ±20% GRM31CB31A226ME19# 33000pF ±10% GRM31MR72A333KA01# 47000pF ±10% GRM31MR72A473KA01# 68000pF ±10% 0.15µF 10Vdc 6.3Vdc Monolithic Microchip GMA Series X5R B For Bonding GMD Series 50Vdc X7R B Product Information 47µF ±20% GRM31CB31A476ME15# X7R 22µF ±20% GRM31CR70J226ME19# GRM31MR72A683KA01# X7U 47µF ±20% GRM31CE70J476ME15# ±10% GRM31MR72A154KA01# X6S 22µF ±20% GRM31CC80J226ME19# 0.22µF ±10% GRM31MR72A224KA01# 47µF ±20% GRM31CC80J476ME18# 0.15µF ±10% GRM31MR71H154KA01# X5R 47µF ±20% GRM31CR60J476ME19# 0.22µF ±10% GRM31MR71H224KA01# B 47µF ±20% GRM31CB30J476ME18# 0.47µF ±10% GRM31MR71H474KA01# X7U 47µF ±20% GRM31CE70G476ME15# 0.68µF ±10% GRM31MR71H684KA88# X6S 47µF ±20% GRM31CC80G476ME19# 1.0µF ±10% GRM31MR71H105KA88# 1.9mm 100Vdc X7R 2.2µF ±10% GRM31CR72A225KA73# ±20% GRM31CR72A225MA73# X6T 100µF ±20% GRM31CD80J107ME39# X5R 100µF ±20% GRM31CR60J107ME39# 6.3Vdc 4Vdc 0.15µF ±10% GRM31MR11H154KA01# 0.22µF ±10% GRM31MR11H224KA01# 0.15µF ±10% GRM31MB11H154KA01# 0.22µF ±10% GRM31MB11H224KA01# X7U 100µF ±20% GRM31CE70G107ME39# 1.0µF ±10% GRM31MB31H105KA87# X6T 100µF ±20% GRM31CD80G107ME39# X5R 10µF ±20% GRM31MR61E106MA12# X5R 100µF ±20% GRM31CR60G107ME39# B 0.22µF ±10% GRM31MB11E224KA01# R B 25Vdc 10Vdc 6.3Vdc 4Vdc Derating Derating Derating Part number # indicates the package specification code. 74 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf Oct.1,2012 GRM Series High Dielectric Constant Type Part Number List 4Vdc 150µF ±20% GRM32RC60J157ME15# Derating X6T 150µF ±20% GRM32RD80G157ME15# Derating X5S 150µF ±20% GRM32RC60G157ME15# X6T 150µF ±20% GRM32RD80E157ME15# 50Vdc X7R 0.68µF ±10% GRM32NR71H684KA01# B 0.68µF ±10% GRM32NB11H684KA01# X6S 22µF ±20% GRM32NC81A226ME19# 0.68µF ±10% GRM32CR72A684KA01# 10Vdc 1.8mm 100Vdc X7R 1.0µF ±10% GRM32CR72A105KA35# X7R 10µF ±10% GRM32DR71E106KA12# X6S 10µF ±10% GRM32DC81E106KA12# 2.7mm 100Vdc X7R 2.2µF ±10% GRM32ER72A225KA35# ±20% GRM32ER72A225MA35# 4.7µF ±10% GRM32ER71H475KA88# 10µF ±10% GRM32ER71H106KA12# 10µF ±10% GRM32ER61H106KA12# ±20% GRM32ER61H106MA12# 4.7µF ±10% GRM32EB31H475KA87# 10µF ±10% GRM32EB31H106KA12# ±20% GRM32EB31H106MA12# X7R 10µF ±10% GRM32ER7YA106KA12# X5R 10µF ±10% GRM32ER6YA106KA12# B 10µF ±10% GRM32EB3YA106KA12# X7R 22µF ±20% GRM32ER71E226ME15# 2.2mm 25Vdc 50Vdc X7R X5R B 35Vdc 25Vdc 16Vdc 10Vdc 6.3Vdc 4Vdc X6S 22µF ±20% GRM32EC81E226ME15# X5R 22µF ±20% GRM32ER61E226ME15# B 22µF ±20% GRM32EB31E226ME15# X7R 22µF ±20% GRM32ER71C226MEA8# X6S 47µF ±20% GRM32EC81C476ME15# X5R 47µF ±20% GRM32ER61C476ME15# B 22µF ±20% GRM32EB31C226ME16# 47µF ±20% GRM32EB31C476ME15# X7R 47µF ±20% GRM32ER71A476ME15# X6S 47µF ±20% GRM32EC81A476ME19# X5R 47µF ±20% GRM32ER61A476ME20# B 47µF ±20% GRM32EB31A476ME20# X7R 47µF ±20% GRM32ER70J476ME20# X7U 100µF ±20% GRM32EE70J107ME15# X6S 47µF ±20% GRM32EC80J476ME64# 100µF ±20% GRM32EC80J107ME20# X5R 100µF ±20% GRM32ER60J107ME20# B 100µF ±20% GRM32EB30J107ME16# X7U 100µF ±20% GRM32EE70G107ME19# X6S 100µF ±20% GRM32EC80G107ME20# Low ESL LLp Series 2.5Vdc Capacitor Array GNM Series X5S High-Q Type GJM Series 1.5mm Part Number High Frequency GQM Series 6.3Vdc Tol. Derating Monolithic Microchip GMA Series 1mm Cap. Derating For Bonding GMD Series Rated TC Voltage Code Product Information T max. For General Purpose GRM Series c 3.2×2.5mm Part number # indicates the package specification code. 75 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors Capacitor Array GNM Series For General Purpose GRM Series Ideal for reducing the mounting area and mounting costs. P P 1 2 3 4 T T 1 2 3 4 Capacitor Array GNM Series W 8 L 2 Elements 1 The number of parts can be reduced. 2 Also contributes to the low profile of the set. Low ESL LLp Series 3 Ideal for decoupling and smoothing. 4 Reduction of environmental impact substances is possible. (Accommodates 2 or 4 times the number of individual chips per reel.) High-Q Type GJM Series High Frequency GQM Series Monolithic Microchip GMA Series For Bonding GMD Series Product Information 76 7 6 L 4 Elements 5 W 8 7 6 5 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 B ±20% GNM1M2B11C473MA01# 22000pF ±20% GNM0M2R61C223ME18# 0.1µF ±20% GNM1M2B11C104MA01# 47000pF ±20% GNM0M2R61C473ME18# X7R 22000pF ±20% GNM1M2R71A223MA01# 47000pF ±20% GNM1M2R71A473MA01# 22000pF ±20% GNM1M2R11A223MA01# 10Vdc 0.1µF ±20% GNM0M2R61C104ME18# 10000pF ±20% GNM0M2B31C103ME18# 22000pF ±20% GNM0M2B31C223ME18# 47000pF ±20% GNM1M2R11A473MA01# 47000pF ±20% GNM0M2B31C473ME18# X5R 22000pF ±20% GNM1M2R61A223MA01# 0.1µF ±20% GNM0M2B31C104ME18# 47000pF ±20% GNM1M2R61A473MA01# X5R 10000pF ±20% GNM0M2R61A103ME17# 22000pF ±20% GNM0M2R61A223ME17# 47000pF ±20% 0.1µF 10000pF R 0.1µF ±20% GNM1M2R61A104MA01# 22000pF ±20% GNM1M2B11A223MA01# GNM0M2R61A473ME17# 47000pF ±20% GNM1M2B11A473MA01# ±20% GNM0M2R61A104ME17# 0.1µF ±20% GNM1M2B11A104MA01# ±20% GNM0M2B31A103ME17# 0.22µF ±20% GNM1M2R61C224ME18# 22000pF ±20% GNM0M2B31A223ME17# 1.0µF ±20% GNM1M2R61C105ME18# 47000pF ±20% GNM0M2B31A473ME17# B 1.0µF ±20% GNM1M2B31C105ME18# 0.1µF ±20% GNM0M2B31A104ME17# X5R 1.0µF ±20% GNM1M2R61A105ME17# X5R 1.0µF ±20% GNM0M2R60G105ME17# 2.2µF ±20% GNM1M2R61A225ME18# B 1.0µF ±20% GNM0M2B30G105ME17# 0.22µF ±20% GNM1M2B31A224ME17# 0.47µF ±20% GNM1M2B31A474ME17# 1.0µF ±20% GNM1M2B31A105ME17# 2.2µF ±20% GNM1M2B31A225ME18# X5R 2.2µF ±20% GNM1M2R60J225ME18# B 2.2µF ±20% GNM1M2B30J225ME18# B 0.8mm 16Vdc 10Vdc X5R B 0.7mm 50Vdc 25Vdc X7R 0.1µF Tol. Part Number ±20% GNM1M2R71C104MAA1# R 0.1µF ±20% GNM1M2R11C104MAA1# X5R 1.0µF ±20% GNM1M2R61C105MEA2# c 4 Elements 2.0×1.25mm B 0.1µF ±20% GNM1M2B11C104MAA1# X5R 1.0µF ±20% GNM1M2R61A105MEA4# B 1.0µF ±20% GNM1M2B31A105MEA4# X7R 1000pF ±20% GNM1M2R71H102MA01# R R 1000pF ±20% GNM1M2R11H102MA01# B X5R 1000pF ±20% GNM1M2R61H102MA01# X5R B 1000pF ±20% GNM1M2B11H102MA01# X7R 2200pF ±20% GNM1M2R71E222MA01# 4700pF ±20% GNM1M2R71E472MA01# 10000pF ±20% GNM1M2R71E103MA01# 2200pF ±20% GNM1M2R11E222MA01# 4700pF ±20% GNM1M2R11E472MA01# 10000pF ±20% GNM1M2R11E103MA01# 2200pF ±20% GNM1M2R61E222MA01# R X5R T max. Rated TC Voltage Code 0.55mm 16Vdc 10Vdc Cap. Tol. Part Number 0.1µF ±20% GNM214R71C104MAA1# 0.1µF ±20% GNM214R11C104MAA1# 0.1µF ±20% GNM214B11C104MAA1# 0.22µF ±20% GNM214R61A224MEA2# 1.0µF ±20% GNM214R61A105MEA2# 0.22µF ±20% GNM214B31A224MEA2# 1.0µF ±20% GNM214B31A105MEA2# 0.22µF ±20% GNM214R60J224MEA2# 1.0µF ±20% GNM214R60J105MEA2# 0.22µF ±20% GNM214B30J224MEA2# 1.0µF ±20% GNM214B30J105MEA2# X7R 470pF ±20% GNM214R71H471MA01# X7R B 6.3Vdc X5R B 0.7mm 50Vdc 4700pF ±20% GNM1M2R61E472MA01# 1000pF ±20% GNM214R71H102MA01# 10000pF ±20% GNM1M2R61E103MA01# R 1000pF ±20% GNM214R11H102MA01# 2200pF ±20% GNM1M2B11E222MA01# B 470pF ±20% GNM214B11H471MA01# 4700pF ±20% GNM1M2B11E472MA01# 1000pF ±20% GNM214B11H102MA01# 10000pF ±20% GNM1M2B11E103MA01# 2200pF ±20% GNM214R71E222MA01# X7R 22000pF ±20% GNM1M2R71C223MA01# 4700pF ±20% GNM214R71E472MA01# 47000pF ±20% GNM1M2R71C473MA01# 10000pF ±20% GNM214R71E103MA01# 0.1µF ±20% GNM1M2R71C104MA01# 2200pF ±20% GNM214R11E222MA01# 22000pF ±20% GNM1M2R11C223MA01# 4700pF ±20% GNM214R11E472MA01# 47000pF ±20% GNM1M2R11C473MA01# 10000pF ±20% GNM214R11E103MA01# 0.1µF ±20% GNM1M2R11C104MA01# 2200pF ±20% GNM214B11E222MA01# ±20% GNM1M2R61C223MA01# 4700pF ±20% GNM214B11E472MA01# B 16Vdc Cap. 6.3Vdc R X5R 22000pF 25Vdc X7R R B High Frequency GQM Series 10Vdc GNM1M2B11C223MA01# 47000pF Rated TC Voltage Code 0.55mm 16Vdc GNM1M2R61C473MA01# ±20% GNM0M2R61C103ME18# c 2 Elements 1.37×1.0mm T max. ±20% 22000pF X5R 47000pF Capacitor Array GNM Series 16Vdc Low ESL LLp Series 0.7mm ±20% B 4Vdc Part Number X5R 10000pF B 10Vdc Tol. Part Number Monolithic Microchip GMA Series 16Vdc Cap. Tol. For Bonding GMD Series 0.5mm Rated TC Voltage Code Cap. Product Information T max. Rated TC Voltage Code High-Q Type GJM Series T max. c 2 Elements 0.9×0.6mm For General Purpose GRM Series GNM Series High Dielectric Constant Type Part Number List Part number # indicates the package specification code. 77 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf Oct.1,2012 GNM Series High Dielectric Constant Type Part Number List (→ c 4 Elements 2.0×1.25mm) T max. For General Purpose GRM Series 0.7mm Rated TC Voltage Code 25Vdc 0.95mm 16Vdc Part Number 10000pF ±20% GNM214B11E103MA01# ±20% GNM214R71C223MA01# 47000pF ±20% GNM214R71C473MA01# 0.1µF ±20% GNM214R71C104MA01# 22000pF ±20% GNM214R11C223MA01# 47000pF ±20% GNM214R11C473MA01# 0.1µF ±20% GNM214R11C104MA01# 22000pF ±20% GNM214B11C223MA01# 47000pF ±20% GNM214B11C473MA01# 0.1µF ±20% GNM214B11C104MA01# X5R 1.0µF ±20% GNM214R61A105ME17# B 1.0µF ±20% GNM214B31A105ME17# X5R 1.0µF ±20% GNM214R60J105ME17# B 1.0µF ±20% GNM214B30J105ME17# B B Capacitor Array GNM Series 6.3Vdc Tol. X7R 22000pF R 10Vdc Cap. Low ESL LLp Series High-Q Type GJM Series High Frequency GQM Series Monolithic Microchip GMA Series For Bonding GMD Series Product Information Part number # indicates the package specification code. 78 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors LLL Series Low ESL For General Purpose GRM Series Low ESL LLL/LLR/LLA/LLM Series Ideal decoupling solution for equipment having advanced features. T W Capacitor Array GNM Series L 1 Ideal for IC decoupling of high-speed operating equipment, due to the low inductance value (ESL value). 2 LW reversed geometry type/multi-terminal type and a large lineup of capacitors are available according to performance requirements. Low ESL capacitor that suppresses the anti-resonance in circuits. Low ESL LLp Series LLR Series T W High-Q Type GJM Series L 1 Reduces the anti-resonance generated in the high-frequency range. 2 An optimal ESR value can be selected from four types, according to the characteristics of the circuit. LLA Series High Frequency GQM Series 3 The low ESL type, is also ideal as a decoupling component. Ideal decoupling solution for equipment having advanced features. P 1 2 3 4 T 1 3 5 7 7 6 W 5 L 2 4 6 8 Monolithic Microchip GMA Series 8 1 Ideal for IC decoupling of high-speed operating equipment, due to the low inductance value (ESL value). 2 LW reversed geometry type/multi-terminal type and a large lineup of capacitors are available according to performance requirements. P 1 2 3 4 10 T 8 7 L 6 5 W 1 3 5 7 9 2 4 6 8 10 Product Information 9 For Bonding GMD Series LLM Series Ideal decoupling solution for equipment having advanced features. 1 Ideal for IC decoupling of high-speed operating equipment, due to the low inductance value (ESL value). 2 LW reversed geometry type/multi-terminal type and a large lineup of capacitors are available according to performance requirements. 79 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. LLL Series High Dielectric Constant Type T max. c 0.5×1.0mm For General Purpose GRM Series T max. Rated TC Voltage Code 0.35mm 6.3Vdc 4Vdc X6S X7S Cap. Tol. Part Number 0.1µF ±20% LLL153C80J104ME01# 0.22µF ±20% LLL153C80J224ME14# 0.47µF ±20% LLL153C70G474ME17# c 0.8×1.6mm Capacitor Array GNM Series T max. 0.5mm Rated TC Voltage Code Cap. Tol. Low ESL Rated TC Voltage Code X7R 10000pF ±20% LLL185R71E103MA11# X7R 22000pF ±20% LLL185R71C223MA11# 47000pF ±20% LLL185R71C473MA11# 4Vdc X7S ±20% LLL215C70G105MA11# X7R 10000pF ±20% LLL216R71H103MA01# 22000pF ±20% LLL216R71H223MA01# X7R 47000pF ±20% LLL216R71E473MA01# 0.1µF ±20% LLL216R71E104MA01# 25Vdc 10Vdc X7R 0.22µF ±20% LLL216R71A224MA01# 0.95mm 16Vdc X7R 0.22µF ±20% LLL219R71C224MA01# 10Vdc X7R 0.47µF ±20% LLL219R71A474MA01# 1.0µF ±20% LLL219R71A105MA01# 2.2µF ±20% LLL219C70G225MA01# Cap. Tol. Low ESL LLp Series 0.1µF ±20% LLL185R71A104MA11# X7S 0.22µF ±20% LLL185C70G224MA11# T max. 0.55mm 4Vdc X7S 1.0µF ±20% LLL185C70G105ME01# 0.5mm 2.2µF ±20% LLL185C70G225ME01# 0.6mm 50Vdc X7R 2200pF ±20% LLL185R71H222MA01# 4700pF ±20% LLL185R71H472MA01# X7R 10000pF ±20% LLL185R71E103MA01# 16Vdc 22000pF ±20% LLL185R71E223MA01# 16Vdc X7R 47000pF ±20% LLL185R71C473MA01# 10Vdc X7R 0.1µF ±20% LLL185R71A104MA01# 0.22µF ±20% LLL185R71A224MA01# 0.47µF ±20% LLL185C70G474MA01# 0.8mm High-Q Type GJM Series High Frequency GQM Series 0.5mm Cap. Tol. Rated TC Voltage Code Part Number 50Vdc X7R 10000pF ±20% LLL315R71H103MA11# 22000pF ±20% LLL315R71H223MA11# 25Vdc X7R 47000pF ±20% LLL315R71E473MA11# 0.1µF ±20% LLL315R71E104MA11# X7R 0.22µF ±20% LLL315R71C224MA11# 10Vdc X7R 0.47µF ±20% LLL315R71A474MA11# 50Vdc X7R 10000pF ±20% LLL317R71H103MA01# 22000pF ±20% LLL317R71H223MA01# 47000pF ±20% LLL317R71H473MA01# 25Vdc X7R 0.1µF ±20% LLL317R71E104MA01# 16Vdc X7R 0.22µF ±20% LLL317R71C224MA01# 0.47µF ±20% LLL317R71C474MA01# 10Vdc X7R 1.0µF ±20% LLL317R71A105MA01# 6.3Vdc X7R 2.2µF ±20% LLL317R70J225MA01# 1.25mm 50Vdc X7R 0.1µF ±20% LLL31MR71H104MA01# 25Vdc X7R 0.22µF ±20% LLL31MR71E224MA01# c 1.25×2.0mm Rated TC Voltage Code X7S c 1.6×3.2mm X7R T max. 1.0µF Part Number 50Vdc 4Vdc X7S Tol. 0.7mm 10Vdc 4Vdc Cap. 0.5mm 4Vdc 16Vdc 25Vdc Part Number List Part Number 25Vdc Oct.1,2012 Part Number Monolithic Microchip GMA Series 50Vdc X7R 10000pF ±20% LLL215R71H103MA11# 25Vdc X7R 22000pF ±20% LLL215R71E223MA11# 0.47µF ±20% LLL31MR71E474MA01# 16Vdc X7R 47000pF ±20% LLL215R71C473MA11# 16Vdc X7R 1.0µF ±20% LLL31MR71C105MA01# 0.1µF ±20% LLL215R71C104MA11# 10Vdc X7R 2.2µF ±20% LLL31MR71A225MA01# 6.3Vdc X7R 4.7µF ±20% LLL31MR70J475MA01# X5R 10µF ±20% LLL31MR60J106ME01# 10Vdc X7R 0.22µF ±20% LLL215R71A224MA11# 6.3Vdc X7R 0.47µF ±20% LLL215R70J474MA11# LLR Series High Dielectric Constant Type Low ESL Part Number List For Bonding GMD Series c 0.8×1.6mm T max. 0.55mm Rated TC Voltage Code 4Vdc X7S Cap. Tol. ESR Part Number 1.0µF ±20% 100mΩ LLR185C70G105ME01# ±20% 220mΩ LLR185C70G105ME03# Product Information ±20% 470mΩ LLR185C70G105ME05# ±20% 1000mΩ LLR185C70G105ME07# Part number # indicates the package specification code. 80 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 4Vdc X7S Cap. Tol. Part Number Rated TC Voltage Code Part Number X7R 22000pF ±20% LLA219R71E223MA01# 47000pF ±20% LLA219R71E473MA01# 0.1µF ±20% LLA219R71C104MA01# 0.22µF ±20% LLA219R71C224MA01# 0.1µF ±20% LLA185C70G104MA01# 0.22µF ±20% LLA185C70G224MA01# 0.47µF ±20% LLA185C70G474MA01# 10Vdc X7R 0.47µF ±20% LLA219R71A474MA01# 1.0µF ±20% LLA185C70G105ME01# 6.3Vdc X7R 1.0µF ±20% LLA219R70J105MA01# 2.2µF ±20% LLA185C70G225ME16# 4Vdc X7S 2.2µF ±20% LLA219C70G225MA01# 4.7µF ±20% LLA219C70G475ME01# Cap. Tol. c 2.0×1.25mm T max. 0.95mm 25Vdc Tol. 16Vdc X7R c 3.2×1.6mm Cap. Tol. Part Number T max. Rated TC Voltage Code Part Number 0.55mm 25Vdc X7R 10000pF ±20% LLA215R71E103MA14# 22000pF ±20% LLA215R71E223MA14# 0.55mm 16Vdc X7R 0.22µF ±20% LLA315R71C224MA14# 16Vdc X7R 47000pF ±20% LLA215R71C473MA14# 10Vdc X7R 0.47µF ±20% LLA315R71A474MA14# 0.1µF ±20% LLA215R71C104MA14# 6.3Vdc X7R 1.0µF ±20% LLA315R70J105MA14# 10Vdc X7R 0.22µF ±20% LLA215R71A224MA14# 2.2µF ±20% LLA315R70J225MA14# 6.3Vdc X7R 0.47µF ±20% LLA215R70J474MA14# 0.95mm 16Vdc X7R 0.47µF ±20% LLA319R71C474MA01# 4Vdc X7S 1.0µF ±20% LLA215C70G105MA14# 10Vdc X7R 1.0µF ±20% LLA319R71A105MA01# 2.2µF ±20% LLA215C70G225ME11# 1.25mm 16Vdc X7R 1.0µF ±20% LLA31MR71C105MA01# 4.7µF ±20% LLA215C70G475ME19# 10Vdc X7R 2.2µF ±20% LLA31MR71A225MA01# ±20% LLA219R71E103MA01# 0.95mm 25Vdc For General Purpose GRM Series 0.55mm Rated TC Voltage Code Cap. X7R 10000pF LLM Series High Dielectric Constant Type Low ESL Low ESL LLp Series T max. Rated TC Voltage Code Part Number List Capacitor Array GNM Series T max. c 1.6×0.8mm Low ESL Part Number List Rated TC Voltage Code 0.55mm 25Vdc 16Vdc 6.3Vdc 4Vdc Cap. Tol. Part Number X7R 10000pF ±20% LLM215R71E103MA11# 22000pF ±20% LLM215R71E223MA11# X7R 47000pF ±20% LLM215R71C473MA11# 0.1µF ±20% LLM215R71C104MA11# 0.22µF ±20% LLM215R70J224MA11# 0.47µF ±20% LLM215R70J474MA11# 1.0µF ±20% LLM215C70G105MA11# 2.2µF ±20% LLM215C70G225ME11# Cap. Tol. X7R X7S Monolithic Microchip GMA Series T max. High Frequency GQM Series c 2.0×1.25mm High-Q Type GJM Series LLA Series High Dielectric Constant Type Oct.1,2012 Rated TC Voltage Code 0.55mm 16Vdc X7R Part Number 0.1µF ±20% LLM315R71C104MA11# 0.22µF ±20% LLM315R71C224MA11# 10Vdc X7R 0.47µF ±20% LLM315R71A474MA11# 6.3Vdc X7R 2.2µF ±20% LLM315R70J225MA11# Product Information T max. For Bonding GMD Series c 3.2×1.6mm Part number # indicates the package specification code. 81 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors High-Q Type GJM Series HiQ For General Purpose GRM Series Contributes to improvements in the reduction of power consumption and processing yield by HiQ or low ESR. e g e Capacitor Array GNM Series T W L 1 Ideal for high-frequency decoupling applications. 2 HiQ and low ESR in VHF, UHF and microwave frequency bands. Low ESL LLp Series 3 Compatible to tight tolerances. High-Q Type GJM Series High Frequency GQM Series Monolithic Microchip GMA Series For Bonding GMD Series Product Information 82 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Part Number 0.22mm 16Vdc C0G 2.2pF Part Number ±0.05pF GJM0225C1C2R2WB01# ±0.1pF GJM0225C1C2R2BB01# 0.2pF ±0.05pF GJM0225C1CR20WB01# 0.3pF ±0.05pF GJM0225C1CR30WB01# 0.4pF ±0.05pF GJM0225C1CR40WB01# ±0.1pF GJM0225C1CR40BB01# ±0.1pF GJM0225C1C2R4BB01# 0.5pF ±0.05pF GJM0225C1CR50WB01# ±0.25pF GJM0225C1C2R4CB01# 2.3pF ±0.1pF GJM0225C1C2R3BB01# ±0.1pF GJM0225C1CR30BB01# 0.6pF 0.7pF 0.8pF 1.0pF 1.1pF 1.2pF 2.5pF ±0.1pF GJM0225C1C2R5BB01# ±0.25pF GJM0225C1C2R5CB01# ±0.05pF GJM0225C1CR70WB01# 2.6pF 1.5pF 1.6pF 1.7pF 1.8pF 1.9pF ±0.1pF GJM0225C1C2R6BB01# ±0.05pF GJM0225C1CR80WB01# ±0.25pF GJM0225C1C2R6CB01# 2.7pF ±0.1pF GJM0225C1C2R7BB01# ±0.1pF GJM0225C1CR90BB01# ±0.25pF GJM0225C1C2R7CB01# ±0.05pF GJM0225C1C1R0WB01# 2.8pF ±0.05pF GJM0225C1C2R8WB01# ±0.1pF GJM0225C1C1R0BB01# ±0.1pF GJM0225C1C2R8BB01# ±0.25pF GJM0225C1C1R0CB01# ±0.25pF GJM0225C1C2R8CB01# ±0.05pF GJM0225C1C1R1WB01# 2.9pF ±0.05pF GJM0225C1C2R9WB01# ±0.1pF GJM0225C1C1R1BB01# ±0.1pF GJM0225C1C2R9BB01# ±0.25pF GJM0225C1C1R1CB01# ±0.25pF GJM0225C1C2R9CB01# ±0.05pF GJM0225C1C1R2WB01# 3.0pF ±0.05pF GJM0225C1C1R3WB01# ±0.05pF GJM0225C1C3R0WB01# ±0.1pF GJM0225C1C3R0BB01# ±0.25pF GJM0225C1C3R0CB01# 3.1pF ±0.05pF GJM0225C1C3R1WB01# ±0.1pF GJM0225C1C1R3BB01# ±0.1pF GJM0225C1C3R1BB01# ±0.25pF GJM0225C1C1R3CB01# ±0.25pF GJM0225C1C3R1CB01# ±0.05pF GJM0225C1C1R4WB01# 3.2pF ±0.05pF GJM0225C1C3R2WB01# ±0.1pF GJM0225C1C1R4BB01# ±0.1pF GJM0225C1C3R2BB01# ±0.25pF GJM0225C1C1R4CB01# ±0.25pF GJM0225C1C3R2CB01# ±0.05pF GJM0225C1C1R5WB01# 3.3pF ±0.05pF GJM0225C1C3R3WB01# ±0.1pF GJM0225C1C1R5BB01# ±0.1pF GJM0225C1C3R3BB01# ±0.25pF GJM0225C1C1R5CB01# ±0.25pF GJM0225C1C3R3CB01# ±0.05pF GJM0225C1C1R6WB01# 3.4pF ±0.05pF GJM0225C1C3R4WB01# ±0.1pF GJM0225C1C1R6BB01# ±0.1pF GJM0225C1C3R4BB01# ±0.25pF GJM0225C1C1R6CB01# ±0.25pF GJM0225C1C3R4CB01# ±0.05pF GJM0225C1C1R7WB01# 3.5pF ±0.05pF GJM0225C1C3R5WB01# ±0.1pF GJM0225C1C1R7BB01# ±0.1pF GJM0225C1C3R5BB01# ±0.25pF GJM0225C1C1R7CB01# ±0.25pF GJM0225C1C3R5CB01# ±0.05pF GJM0225C1C1R8WB01# 3.6pF ±0.05pF GJM0225C1C3R6WB01# ±0.1pF GJM0225C1C1R8BB01# ±0.1pF GJM0225C1C3R6BB01# ±0.25pF GJM0225C1C1R8CB01# ±0.25pF GJM0225C1C3R6CB01# ±0.05pF GJM0225C1C1R9WB01# 3.7pF ±0.05pF GJM0225C1C2R0WB01# ±0.05pF GJM0225C1C3R7WB01# ±0.1pF GJM0225C1C3R7BB01# ±0.25pF GJM0225C1C1R9CB01# 2.1pF ±0.05pF GJM0225C1C2R7WB01# ±0.05pF GJM0225C1CR90WB01# ±0.1pF GJM0225C1C1R9BB01# 2.0pF ±0.05pF GJM0225C1C2R6WB01# ±0.1pF GJM0225C1CR70BB01# ±0.25pF GJM0225C1C1R2CB01# 1.4pF ±0.05pF GJM0225C1C2R5WB01# ±0.1pF GJM0225C1CR60BB01# ±0.1pF GJM0225C1C1R2BB01# 1.3pF ±0.05pF GJM0225C1C2R4WB01# ±0.05pF GJM0225C1CR60WB01# ±0.1pF GJM0225C1CR80BB01# 0.9pF ±0.25pF GJM0225C1C2R3CB01# 2.4pF ±0.25pF GJM0225C1C3R7CB01# 3.8pF ±0.05pF GJM0225C1C3R8WB01# ±0.1pF GJM0225C1C2R0BB01# ±0.1pF GJM0225C1C3R8BB01# ±0.25pF GJM0225C1C2R0CB01# ±0.25pF GJM0225C1C3R8CB01# ±0.05pF GJM0225C1C2R1WB01# ±0.1pF GJM0225C1C2R1BB01# ±0.25pF GJM0225C1C2R1CB01# Capacitor Array GNM Series ±0.1pF GJM0225C1CR50BB01# ±0.05pF GJM0225C1C2R3WB01# Low ESL LLp Series ±0.1pF GJM0225C1CR20BB01# ±0.25pF GJM0225C1C2R2CB01# High-Q Type GJM Series C0G Tol. Tol. High Frequency GQM Series 0.22mm 16Vdc Cap. Cap. Monolithic Microchip GMA Series Rated TC Voltage Code Rated TC Voltage Code For Bonding GMD Series T max. T max. Ultracompact Part Number List 3.9pF Product Information c 0.4×0.2mm HiQ For General Purpose GRM Series GJM Series Temperature Compensating Type Oct.1,2012 ±0.05pF GJM0225C1C3R9WB01# ±0.1pF GJM0225C1C3R9BB01# ±0.25pF GJM0225C1C3R9CB01# Part number # indicates the package specification code. 83 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 0.4×0.2mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.22mm 16Vdc C0G Cap. 4.0pF Tol. Part Number ±0.05pF GJM0225C1C4R0WB01# T max. Rated TC Voltage Code 0.22mm 16Vdc C0G Cap. 5.6pF ±0.1pF GJM0225C1C4R0BB01# 4.2pF ±0.05pF GJM0225C1C4R1WB01# ±0.5pF GJM0225C1C5R6DB01# 5.7pF ±0.25pF GJM0225C1C4R1CB01# ±0.25pF GJM0225C1C5R7CB01# ±0.05pF GJM0225C1C4R2WB01# ±0.5pF GJM0225C1C5R7DB01# 5.8pF Capacitor Array GNM Series Low ESL LLp Series 4.6pF ±0.25pF GJM0225C1C4R2CB01# ±0.1pF GJM0225C1C5R8BB01# ±0.25pF GJM0225C1C5R8CB01# ±0.5pF GJM0225C1C5R8DB01# 5.9pF ±0.1pF GJM0225C1C5R9BB01# ±0.1pF GJM0225C1C4R4BB01# ±0.25pF GJM0225C1C5R9CB01# ±0.25pF GJM0225C1C4R4CB01# ±0.5pF GJM0225C1C5R9DB01# ±0.05pF GJM0225C1C4R5WB01# 6.0pF ±0.1pF GJM0225C1C4R5BB01# ±0.1pF GJM0225C1C6R0BB01# ±0.25pF GJM0225C1C6R0CB01# ±0.05pF GJM0225C1C4R6WB01# ±0.5pF GJM0225C1C6R0DB01# 6.1pF ±0.1pF GJM0225C1C6R1BB01# ±0.05pF GJM0225C1C4R7WB01# ±0.25pF GJM0225C1C6R1CB01# High-Q Type GJM Series ±0.5pF GJM0225C1C6R1DB01# 6.2pF ±0.1pF GJM0225C1C6R2BB01# ±0.1pF GJM0225C1C4R8BB01# ±0.25pF GJM0225C1C6R2CB01# ±0.05pF GJM0225C1C4R9WB01# ±0.5pF GJM0225C1C6R2DB01# 6.3pF High Frequency GQM Series ±0.1pF GJM0225C1C4R9BB01# ±0.1pF GJM0225C1C6R3BB01# ±0.25pF GJM0225C1C6R3CB01# ±0.05pF GJM0225C1C5R0WB01# ±0.5pF GJM0225C1C6R3DB01# 6.4pF ±0.1pF GJM0225C1C6R4BB01# ±0.05pF GJM0225C1C5R1WB01# ±0.25pF GJM0225C1C6R4CB01# Monolithic Microchip GMA Series ±0.1pF GJM0225C1C5R1BB01# ±0.5pF GJM0225C1C6R4DB01# 6.5pF ±0.1pF GJM0225C1C6R5BB01# ±0.05pF GJM0225C1C5R2WB01# ±0.25pF GJM0225C1C6R5CB01# ±0.25pF GJM0225C1C5R2CB01# ±0.5pF GJM0225C1C6R5DB01# 6.6pF ±0.5pF GJM0225C1C5R2DB01# ±0.1pF GJM0225C1C6R6BB01# ±0.25pF GJM0225C1C6R6CB01# For Bonding GMD Series ±0.1pF GJM0225C1C5R3BB01# ±0.5pF GJM0225C1C6R6DB01# 6.7pF ±0.5pF GJM0225C1C5R3DB01# ±0.1pF GJM0225C1C6R7BB01# ±0.25pF GJM0225C1C6R7CB01# ±0.1pF GJM0225C1C5R4BB01# ±0.5pF GJM0225C1C6R7DB01# 6.8pF ±0.05pF GJM0225C1C6R8WB01# Product Information ±0.5pF GJM0225C1C5R4DB01# ±0.1pF GJM0225C1C6R8BB01# ±0.05pF GJM0225C1C5R5WB01# ±0.25pF GJM0225C1C6R8CB01# ±0.1pF GJM0225C1C5R5BB01# ±0.25pF GJM0225C1C5R5CB01# ±0.5pF GJM0225C1C5R5DB01# 5.6pF ±0.05pF GJM0225C1C6R7WB01# ±0.05pF GJM0225C1C5R4WB01# ±0.25pF GJM0225C1C5R4CB01# 5.5pF ±0.05pF GJM0225C1C6R6WB01# ±0.05pF GJM0225C1C5R3WB01# ±0.25pF GJM0225C1C5R3CB01# 5.4pF ±0.05pF GJM0225C1C6R5WB01# ±0.5pF GJM0225C1C5R1DB01# ±0.1pF GJM0225C1C5R2BB01# 5.3pF ±0.05pF GJM0225C1C6R4WB01# ±0.25pF GJM0225C1C5R0CB01# ±0.25pF GJM0225C1C5R1CB01# 5.2pF ±0.05pF GJM0225C1C6R3WB01# ±0.25pF GJM0225C1C4R9CB01# ±0.1pF GJM0225C1C5R0BB01# 5.1pF ±0.05pF GJM0225C1C6R2WB01# ±0.05pF GJM0225C1C4R8WB01# ±0.25pF GJM0225C1C4R8CB01# 5.0pF ±0.05pF GJM0225C1C6R1WB01# ±0.25pF GJM0225C1C4R6CB01# ±0.25pF GJM0225C1C4R7CB01# 4.9pF ±0.05pF GJM0225C1C6R0WB01# ±0.25pF GJM0225C1C4R5CB01# ±0.1pF GJM0225C1C4R7BB01# 4.8pF ±0.05pF GJM0225C1C5R9WB01# ±0.05pF GJM0225C1C4R4WB01# ±0.1pF GJM0225C1C4R6BB01# 4.7pF ±0.05pF GJM0225C1C5R8WB01# ±0.05pF GJM0225C1C4R3WB01# ±0.1pF GJM0225C1C4R3BB01# 4.5pF ±0.05pF GJM0225C1C5R7WB01# ±0.1pF GJM0225C1C5R7BB01# ±0.25pF GJM0225C1C4R3CB01# 4.4pF ±0.1pF GJM0225C1C5R6BB01# ±0.1pF GJM0225C1C4R1BB01# ±0.1pF GJM0225C1C4R2BB01# 4.3pF Part Number ±0.25pF GJM0225C1C5R6CB01# ±0.25pF GJM0225C1C4R0CB01# 4.1pF Tol. ±0.05pF GJM0225C1C5R6WB01# ±0.5pF GJM0225C1C6R8DB01# 6.9pF ±0.05pF GJM0225C1C6R9WB01# ±0.1pF GJM0225C1C6R9BB01# ±0.25pF GJM0225C1C6R9CB01# Part number # indicates the package specification code. 84 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 0.4×0.2mm) 0.22mm 16Vdc C0G 8.3pF 7.1pF ±0.1pF GJM0225C1C8R4BB01# ±0.05pF GJM0225C1C7R1WB01# ±0.25pF GJM0225C1C8R4CB01# ±0.5pF GJM0225C1C8R4DB01# 8.5pF ±0.5pF GJM0225C1C7R1DB01# ±0.1pF GJM0225C1C8R5BB01# ±0.25pF GJM0225C1C8R5CB01# ±0.1pF GJM0225C1C7R2BB01# ±0.5pF GJM0225C1C8R5DB01# 8.6pF ±0.5pF GJM0225C1C7R2DB01# ±0.1pF GJM0225C1C8R6BB01# ±0.25pF GJM0225C1C8R6CB01# ±0.1pF GJM0225C1C7R3BB01# ±0.5pF GJM0225C1C8R6DB01# 8.7pF ±0.5pF GJM0225C1C7R3DB01# ±0.1pF GJM0225C1C8R7BB01# ±0.25pF GJM0225C1C8R7CB01# ±0.1pF GJM0225C1C7R4BB01# ±0.5pF GJM0225C1C8R7DB01# 8.8pF ±0.1pF GJM0225C1C8R8BB01# ±0.05pF GJM0225C1C7R5WB01# ±0.25pF GJM0225C1C8R8CB01# ±0.25pF GJM0225C1C7R5CB01# ±0.5pF GJM0225C1C8R8DB01# 8.9pF ±0.5pF GJM0225C1C7R5DB01# ±0.1pF GJM0225C1C8R9BB01# ±0.25pF GJM0225C1C8R9CB01# ±0.1pF GJM0225C1C7R6BB01# ±0.5pF GJM0225C1C8R9DB01# 9.0pF ±0.5pF GJM0225C1C7R6DB01# ±0.1pF GJM0225C1C9R0BB01# ±0.25pF GJM0225C1C9R0CB01# ±0.1pF GJM0225C1C7R7BB01# ±0.5pF GJM0225C1C9R0DB01# 9.1pF ±0.1pF GJM0225C1C9R1BB01# ±0.05pF GJM0225C1C7R8WB01# ±0.25pF GJM0225C1C9R1CB01# ±0.1pF GJM0225C1C7R8BB01# ±0.5pF GJM0225C1C9R1DB01# 9.2pF ±0.1pF GJM0225C1C9R2BB01# ±0.05pF GJM0225C1C7R9WB01# ±0.25pF GJM0225C1C9R2CB01# ±0.25pF GJM0225C1C7R9CB01# ±0.5pF GJM0225C1C9R2DB01# 9.3pF ±0.5pF GJM0225C1C7R9DB01# ±0.1pF GJM0225C1C9R3BB01# ±0.25pF GJM0225C1C9R3CB01# ±0.1pF GJM0225C1C8R0BB01# ±0.5pF GJM0225C1C9R3DB01# 9.4pF ±0.05pF GJM0225C1C9R4WB01# ±0.5pF GJM0225C1C8R0DB01# ±0.1pF GJM0225C1C9R4BB01# ±0.05pF GJM0225C1C8R1WB01# ±0.25pF GJM0225C1C9R4CB01# ±0.1pF GJM0225C1C8R1BB01# ±0.5pF GJM0225C1C9R4DB01# ±0.25pF GJM0225C1C8R1CB01# 9.5pF ±0.05pF GJM0225C1C9R5WB01# ±0.5pF GJM0225C1C8R1DB01# ±0.1pF GJM0225C1C9R5BB01# ±0.05pF GJM0225C1C8R2WB01# ±0.25pF GJM0225C1C9R5CB01# ±0.1pF GJM0225C1C8R2BB01# ±0.25pF GJM0225C1C8R2CB01# ±0.5pF GJM0225C1C8R2DB01# 8.3pF ±0.05pF GJM0225C1C9R3WB01# ±0.05pF GJM0225C1C8R0WB01# ±0.25pF GJM0225C1C8R0CB01# 8.2pF ±0.05pF GJM0225C1C9R2WB01# ±0.5pF GJM0225C1C7R8DB01# ±0.1pF GJM0225C1C7R9BB01# 8.1pF ±0.05pF GJM0225C1C9R1WB01# ±0.5pF GJM0225C1C7R7DB01# ±0.25pF GJM0225C1C7R8CB01# 8.0pF ±0.05pF GJM0225C1C9R0WB01# ±0.05pF GJM0225C1C7R7WB01# ±0.25pF GJM0225C1C7R7CB01# 7.9pF ±0.05pF GJM0225C1C8R9WB01# ±0.05pF GJM0225C1C7R6WB01# ±0.25pF GJM0225C1C7R6CB01# 7.8pF ±0.05pF GJM0225C1C8R8WB01# ±0.5pF GJM0225C1C7R4DB01# ±0.1pF GJM0225C1C7R5BB01# 7.7pF ±0.05pF GJM0225C1C8R7WB01# ±0.05pF GJM0225C1C7R4WB01# ±0.25pF GJM0225C1C7R4CB01# 7.6pF ±0.05pF GJM0225C1C8R6WB01# ±0.05pF GJM0225C1C7R3WB01# ±0.25pF GJM0225C1C7R3CB01# 7.5pF ±0.05pF GJM0225C1C8R5WB01# ±0.05pF GJM0225C1C7R2WB01# ±0.25pF GJM0225C1C7R2CB01# 7.4pF ±0.05pF GJM0225C1C8R4WB01# ±0.5pF GJM0225C1C7R0DB01# ±0.25pF GJM0225C1C7R1CB01# 7.3pF ±0.1pF GJM0225C1C8R3BB01# ±0.5pF GJM0225C1C8R3DB01# 8.4pF ±0.1pF GJM0225C1C7R1BB01# 7.2pF Part Number ±0.25pF GJM0225C1C8R3CB01# ±0.1pF GJM0225C1C7R0BB01# ±0.25pF GJM0225C1C7R0CB01# Tol. ±0.05pF GJM0225C1C8R3WB01# For General Purpose GRM Series ±0.05pF GJM0225C1C7R0WB01# Cap. Capacitor Array GNM Series ±0.5pF GJM0225C1C6R9DB01# 7.0pF Rated TC Voltage Code Low ESL LLp Series 6.9pF T max. High-Q Type GJM Series Part Number High Frequency GQM Series C0G Tol. Monolithic Microchip GMA Series 0.22mm 16Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. ±0.5pF GJM0225C1C9R5DB01# 9.6pF ±0.05pF GJM0225C1C9R6WB01# ±0.1pF GJM0225C1C9R6BB01# ±0.25pF GJM0225C1C9R6CB01# Part number # indicates the package specification code. 85 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 0.4×0.2mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.22mm 16Vdc C0G Cap. Tol. Part Number 9.6pF ±0.5pF GJM0225C1C9R6DB01# 9.7pF ±0.05pF GJM0225C1C9R7WB01# T max. Rated TC Voltage Code 0.22mm 16Vdc CK Capacitor Array GNM Series Low ESL LLp Series CK 1.7pF ±0.25pF GJM0224C1C1R7CB01# 1.8pF ±0.05pF GJM0224C1C1R8WB01# ±0.1pF GJM0224C1C1R8BB01# ±0.25pF GJM0224C1C1R8CB01# 1.9pF ±0.05pF GJM0224C1C1R9WB01# ±0.05pF GJM0225C1C9R8WB01# ±0.1pF GJM0224C1C1R9BB01# ±0.1pF GJM0225C1C9R8BB01# ±0.25pF GJM0224C1C1R9CB01# 2.0pF ±0.05pF GJM0224C1C2R0WB01# ±0.5pF GJM0225C1C9R8DB01# ±0.1pF GJM0224C1C2R0BB01# ±0.05pF GJM0225C1C9R9WB01# ±0.25pF GJM0224C1C2R0CB01# ±0.1pF GJM0225C1C9R9BB01# 10pF Part Number ±0.25pF GJM0225C1C9R7CB01# ±0.25pF GJM0225C1C9R8CB01# 9.9pF Tol. ±0.1pF GJM0225C1C9R7BB01# ±0.5pF GJM0225C1C9R7DB01# 9.8pF Cap. CJ 2.1pF ±0.05pF GJM0223C1C2R1WB01# ±0.25pF GJM0225C1C9R9CB01# ±0.1pF GJM0223C1C2R1BB01# ±0.5pF GJM0225C1C9R9DB01# ±0.25pF GJM0223C1C2R1CB01# ±2% GJM0225C1C100GB01# ±5% GJM0225C1C100JB01# 2.2pF ±0.05pF GJM0223C1C2R2WB01# ±0.1pF GJM0223C1C2R2BB01# 0.2pF ±0.05pF GJM0224C1CR20WB01# 0.3pF ±0.05pF GJM0224C1CR30WB01# ±0.1pF GJM0223C1C2R3BB01# ±0.1pF GJM0224C1CR30BB01# ±0.25pF GJM0223C1C2R3CB01# ±0.1pF GJM0224C1CR20BB01# 0.4pF ±0.05pF GJM0224C1CR40WB01# ±0.25pF GJM0223C1C2R2CB01# 2.3pF 2.4pF ±0.1pF GJM0224C1CR40BB01# 0.5pF High-Q Type GJM Series 0.6pF ±0.05pF GJM0223C1C2R4WB01# ±0.1pF GJM0223C1C2R4BB01# ±0.05pF GJM0224C1CR50WB01# ±0.1pF GJM0224C1CR50BB01# ±0.05pF GJM0223C1C2R3WB01# ±0.25pF GJM0223C1C2R4CB01# 2.5pF ±0.05pF GJM0223C1C2R5WB01# ±0.05pF GJM0224C1CR60WB01# ±0.1pF GJM0223C1C2R5BB01# ±0.1pF GJM0224C1CR60BB01# ±0.25pF GJM0223C1C2R5CB01# High Frequency GQM Series 0.7pF ±0.05pF GJM0224C1CR70WB01# ±0.1pF GJM0224C1CR70BB01# ±0.1pF GJM0223C1C2R6BB01# 0.8pF ±0.05pF GJM0224C1CR80WB01# ±0.25pF GJM0223C1C2R6CB01# 0.9pF ±0.05pF GJM0224C1CR90WB01# ±0.1pF GJM0223C1C2R7BB01# ±0.1pF GJM0224C1CR90BB01# ±0.25pF GJM0223C1C2R7CB01# ±0.1pF GJM0224C1CR80BB01# 1.0pF Monolithic Microchip GMA Series 1.1pF 1.2pF 1.3pF ±0.05pF GJM0224C1C1R0WB01# 2.6pF 2.7pF 2.8pF For Bonding GMD Series Product Information 1.6pF 1.7pF ±0.05pF GJM0223C1C2R8WB01# ±0.1pF GJM0223C1C2R8BB01# ±0.25pF GJM0224C1C1R0CB01# ±0.25pF GJM0223C1C2R8CB01# ±0.05pF GJM0224C1C1R1WB01# 2.9pF ±0.05pF GJM0223C1C2R9WB01# ±0.1pF GJM0224C1C1R1BB01# ±0.1pF GJM0223C1C2R9BB01# ±0.25pF GJM0224C1C1R1CB01# ±0.25pF GJM0223C1C2R9CB01# ±0.05pF GJM0224C1C1R2WB01# 3.0pF ±0.05pF GJM0223C1C3R0WB01# ±0.1pF GJM0224C1C1R2BB01# ±0.1pF GJM0223C1C3R0BB01# ±0.25pF GJM0224C1C1R2CB01# ±0.25pF GJM0223C1C3R0CB01# ±0.05pF GJM0224C1C1R3WB01# 3.1pF ±0.05pF GJM0224C1C1R4WB01# ±0.05pF GJM0223C1C3R1WB01# ±0.1pF GJM0223C1C3R1BB01# ±0.25pF GJM0224C1C1R3CB01# 1.5pF ±0.05pF GJM0223C1C2R7WB01# ±0.1pF GJM0224C1C1R0BB01# ±0.1pF GJM0224C1C1R3BB01# 1.4pF ±0.05pF GJM0223C1C2R6WB01# ±0.25pF GJM0223C1C3R1CB01# 3.2pF ±0.05pF GJM0223C1C3R2WB01# ±0.1pF GJM0224C1C1R4BB01# ±0.1pF GJM0223C1C3R2BB01# ±0.25pF GJM0224C1C1R4CB01# ±0.25pF GJM0223C1C3R2CB01# ±0.05pF GJM0224C1C1R5WB01# 3.3pF ±0.05pF GJM0223C1C3R3WB01# ±0.1pF GJM0224C1C1R5BB01# ±0.1pF GJM0223C1C3R3BB01# ±0.25pF GJM0224C1C1R5CB01# ±0.25pF GJM0223C1C3R3CB01# ±0.05pF GJM0224C1C1R6WB01# 3.4pF ±0.05pF GJM0223C1C3R4WB01# ±0.1pF GJM0224C1C1R6BB01# ±0.1pF GJM0223C1C3R4BB01# ±0.25pF GJM0224C1C1R6CB01# ±0.25pF GJM0223C1C3R4CB01# ±0.05pF GJM0224C1C1R7WB01# ±0.1pF GJM0224C1C1R7BB01# 3.5pF ±0.05pF GJM0223C1C3R5WB01# ±0.1pF GJM0223C1C3R5BB01# Part number # indicates the package specification code. 86 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 0.4×0.2mm) Part Number 3.5pF ±0.25pF GJM0223C1C3R5CB01# 3.6pF ±0.05pF GJM0223C1C3R6WB01# ±0.1pF GJM0222C1C5R3BB01# ±0.1pF GJM0223C1C3R6BB01# ±0.25pF GJM0222C1C5R3CB01# 0.22mm 16Vdc CH 5.3pF ±0.25pF GJM0223C1C3R6CB01# 3.7pF 3.8pF ±0.05pF GJM0223C1C3R7WB01# 3.9pF ±0.5pF GJM0222C1C5R3DB01# 5.4pF ±0.1pF GJM0222C1C5R4BB01# ±0.25pF GJM0222C1C5R4CB01# ±0.05pF GJM0223C1C3R8WB01# ±0.5pF GJM0222C1C5R4DB01# 5.5pF 4.2pF ±0.1pF GJM0222C1C5R5BB01# ±0.05pF GJM0223C1C3R9WB01# ±0.25pF GJM0222C1C5R5CB01# ±0.5pF GJM0222C1C5R5DB01# 5.6pF ±0.1pF GJM0222C1C5R6BB01# ±0.1pF GJM0222C1C4R0BB01# ±0.25pF GJM0222C1C5R6CB01# ±0.25pF GJM0222C1C4R0CB01# ±0.5pF GJM0222C1C5R6DB01# ±0.05pF GJM0222C1C4R1WB01# 5.7pF ±0.1pF GJM0222C1C5R7BB01# ±0.25pF GJM0222C1C4R1CB01# ±0.25pF GJM0222C1C5R7CB01# ±0.05pF GJM0222C1C4R2WB01# ±0.5pF GJM0222C1C5R7DB01# 5.8pF ±0.25pF GJM0222C1C4R2CB01# ±0.1pF GJM0222C1C5R8BB01# ±0.25pF GJM0222C1C5R8CB01# ±0.5pF GJM0222C1C5R8DB01# 5.9pF ±0.1pF GJM0222C1C5R9BB01# ±0.1pF GJM0222C1C4R4BB01# ±0.25pF GJM0222C1C5R9CB01# ±0.05pF GJM0222C1C4R5WB01# ±0.5pF GJM0222C1C5R9DB01# 6.0pF ±0.1pF GJM0222C1C4R5BB01# ±0.1pF GJM0222C1C6R0BB01# ±0.25pF GJM0222C1C6R0CB01# ±0.05pF GJM0222C1C4R6WB01# ±0.5pF GJM0222C1C6R0DB01# 6.1pF ±0.25pF GJM0222C1C4R6CB01# ±0.1pF GJM0222C1C6R1BB01# ±0.25pF GJM0222C1C6R1CB01# ±0.1pF GJM0222C1C4R7BB01# ±0.5pF GJM0222C1C6R1DB01# 6.2pF 5.0pF ±0.1pF GJM0222C1C6R2BB01# ±0.1pF GJM0222C1C4R8BB01# ±0.25pF GJM0222C1C6R2CB01# ±0.05pF GJM0222C1C4R9WB01# ±0.5pF GJM0222C1C6R2DB01# 6.3pF ±0.1pF GJM0222C1C6R3BB01# ±0.25pF GJM0222C1C4R9CB01# ±0.25pF GJM0222C1C6R3CB01# ±0.05pF GJM0222C1C5R0WB01# ±0.5pF GJM0222C1C6R3DB01# 6.4pF ±0.05pF GJM0222C1C6R4WB01# ±0.25pF GJM0222C1C5R0CB01# ±0.1pF GJM0222C1C6R4BB01# ±0.05pF GJM0222C1C5R1WB01# ±0.25pF GJM0222C1C6R4CB01# ±0.1pF GJM0222C1C5R1BB01# ±0.25pF GJM0222C1C5R1CB01# 5.2pF ±0.05pF GJM0222C1C6R3WB01# ±0.1pF GJM0222C1C4R9BB01# ±0.1pF GJM0222C1C5R0BB01# 5.1pF ±0.05pF GJM0222C1C6R2WB01# ±0.05pF GJM0222C1C4R8WB01# ±0.25pF GJM0222C1C4R8CB01# 4.9pF ±0.05pF GJM0222C1C6R1WB01# ±0.05pF GJM0222C1C4R7WB01# ±0.25pF GJM0222C1C4R7CB01# 4.8pF ±0.05pF GJM0222C1C6R0WB01# ±0.25pF GJM0222C1C4R5CB01# ±0.1pF GJM0222C1C4R6BB01# 4.7pF ±0.05pF GJM0222C1C5R9WB01# ±0.05pF GJM0222C1C4R4WB01# ±0.25pF GJM0222C1C4R4CB01# 4.6pF ±0.05pF GJM0222C1C5R8WB01# ±0.05pF GJM0222C1C4R3WB01# ±0.1pF GJM0222C1C4R3BB01# 4.5pF ±0.05pF GJM0222C1C5R7WB01# ±0.1pF GJM0222C1C4R1BB01# ±0.25pF GJM0222C1C4R3CB01# 4.4pF ±0.05pF GJM0222C1C5R6WB01# ±0.05pF GJM0222C1C4R0WB01# ±0.1pF GJM0222C1C4R2BB01# 4.3pF ±0.05pF GJM0222C1C5R5WB01# ±0.25pF GJM0223C1C3R8CB01# ±0.25pF GJM0223C1C3R9CB01# 4.1pF ±0.05pF GJM0222C1C5R4WB01# ±0.1pF GJM0223C1C3R7BB01# ±0.1pF GJM0223C1C3R9BB01# 4.0pF ±0.05pF GJM0222C1C5R3WB01# ±0.25pF GJM0223C1C3R7CB01# ±0.1pF GJM0223C1C3R8BB01# CH Tol. ±0.5pF GJM0222C1C6R4DB01# 6.5pF ±0.05pF GJM0222C1C6R5WB01# ±0.5pF GJM0222C1C5R1DB01# ±0.1pF GJM0222C1C6R5BB01# ±0.05pF GJM0222C1C5R2WB01# ±0.25pF GJM0222C1C6R5CB01# ±0.5pF GJM0222C1C6R5DB01# ±0.1pF GJM0222C1C5R2BB01# ±0.25pF GJM0222C1C5R2CB01# ±0.5pF GJM0222C1C5R2DB01# For General Purpose GRM Series Cap. Capacitor Array GNM Series Rated TC Voltage Code Low ESL LLp Series T max. High-Q Type GJM Series Part Number High Frequency GQM Series CJ Tol. Monolithic Microchip GMA Series 0.22mm 16Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. 6.6pF ±0.05pF GJM0222C1C6R6WB01# ±0.1pF GJM0222C1C6R6BB01# Part number # indicates the package specification code. 87 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 0.4×0.2mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.22mm 16Vdc CH Cap. 6.6pF 6.7pF Tol. Part Number ±0.25pF GJM0222C1C6R6CB01# T max. Rated TC Voltage Code 0.22mm 16Vdc CH Cap. 8.0pF ±0.1pF GJM0222C1C8R0BB01# ±0.25pF GJM0222C1C8R0CB01# ±0.5pF GJM0222C1C8R0DB01# 8.1pF ±0.5pF GJM0222C1C6R7DB01# ±0.1pF GJM0222C1C8R1BB01# ±0.25pF GJM0222C1C8R1CB01# ±0.1pF GJM0222C1C6R8BB01# ±0.5pF GJM0222C1C8R1DB01# Capacitor Array GNM Series 8.2pF ±0.1pF GJM0222C1C8R2BB01# ±0.05pF GJM0222C1C6R9WB01# ±0.25pF GJM0222C1C8R2CB01# ±0.25pF GJM0222C1C6R9CB01# ±0.5pF GJM0222C1C8R2DB01# 8.3pF Low ESL LLp Series ±0.5pF GJM0222C1C6R9DB01# ±0.1pF GJM0222C1C8R3BB01# ±0.25pF GJM0222C1C8R3CB01# ±0.1pF GJM0222C1C7R0BB01# ±0.5pF GJM0222C1C8R3DB01# 8.4pF ±0.1pF GJM0222C1C8R4BB01# ±0.05pF GJM0222C1C7R1WB01# ±0.25pF GJM0222C1C8R4CB01# ±0.1pF GJM0222C1C7R1BB01# ±0.5pF GJM0222C1C8R4DB01# 8.5pF High-Q Type GJM Series ±0.5pF GJM0222C1C7R1DB01# ±0.1pF GJM0222C1C8R5BB01# ±0.25pF GJM0222C1C8R5CB01# ±0.1pF GJM0222C1C7R2BB01# ±0.5pF GJM0222C1C8R5DB01# 8.6pF ±0.1pF GJM0222C1C8R6BB01# ±0.05pF GJM0222C1C7R3WB01# ±0.25pF GJM0222C1C8R6CB01# High Frequency GQM Series ±0.25pF GJM0222C1C7R3CB01# ±0.5pF GJM0222C1C8R6DB01# 8.7pF ±0.5pF GJM0222C1C7R3DB01# ±0.1pF GJM0222C1C8R7BB01# ±0.25pF GJM0222C1C8R7CB01# ±0.1pF GJM0222C1C7R4BB01# ±0.5pF GJM0222C1C8R7DB01# 8.8pF Monolithic Microchip GMA Series ±0.5pF GJM0222C1C7R4DB01# ±0.1pF GJM0222C1C8R8BB01# ±0.25pF GJM0222C1C8R8CB01# ±0.1pF GJM0222C1C7R5BB01# ±0.5pF GJM0222C1C8R8DB01# 8.9pF ±0.5pF GJM0222C1C7R5DB01# ±0.1pF GJM0222C1C8R9BB01# ±0.25pF GJM0222C1C8R9CB01# ±0.1pF GJM0222C1C7R6BB01# ±0.5pF GJM0222C1C8R9DB01# 9.0pF ±0.05pF GJM0222C1C9R0WB01# For Bonding GMD Series ±0.5pF GJM0222C1C7R6DB01# ±0.1pF GJM0222C1C9R0BB01# ±0.05pF GJM0222C1C7R7WB01# ±0.25pF GJM0222C1C9R0CB01# ±0.1pF GJM0222C1C7R7BB01# ±0.25pF GJM0222C1C7R7CB01# ±0.5pF GJM0222C1C9R0DB01# 9.1pF ±0.05pF GJM0222C1C9R1WB01# ±0.5pF GJM0222C1C7R7DB01# ±0.1pF GJM0222C1C9R1BB01# ±0.05pF GJM0222C1C7R8WB01# ±0.25pF GJM0222C1C9R1CB01# ±0.1pF GJM0222C1C7R8BB01# Product Information ±0.25pF GJM0222C1C7R8CB01# 7.9pF ±0.05pF GJM0222C1C8R9WB01# ±0.05pF GJM0222C1C7R6WB01# ±0.25pF GJM0222C1C7R6CB01# 7.8pF ±0.05pF GJM0222C1C8R8WB01# ±0.05pF GJM0222C1C7R5WB01# ±0.25pF GJM0222C1C7R5CB01# 7.7pF ±0.05pF GJM0222C1C8R7WB01# ±0.05pF GJM0222C1C7R4WB01# ±0.25pF GJM0222C1C7R4CB01# 7.6pF ±0.05pF GJM0222C1C8R6WB01# ±0.5pF GJM0222C1C7R2DB01# ±0.1pF GJM0222C1C7R3BB01# 7.5pF ±0.05pF GJM0222C1C8R5WB01# ±0.05pF GJM0222C1C7R2WB01# ±0.25pF GJM0222C1C7R2CB01# 7.4pF ±0.05pF GJM0222C1C8R4WB01# ±0.5pF GJM0222C1C7R0DB01# ±0.25pF GJM0222C1C7R1CB01# 7.3pF ±0.05pF GJM0222C1C8R3WB01# ±0.05pF GJM0222C1C7R0WB01# ±0.25pF GJM0222C1C7R0CB01# 7.2pF ±0.05pF GJM0222C1C8R2WB01# ±0.5pF GJM0222C1C6R8DB01# ±0.1pF GJM0222C1C6R9BB01# 7.1pF ±0.05pF GJM0222C1C8R1WB01# ±0.05pF GJM0222C1C6R8WB01# ±0.25pF GJM0222C1C6R8CB01# 7.0pF ±0.05pF GJM0222C1C8R0WB01# ±0.05pF GJM0222C1C6R7WB01# ±0.1pF GJM0222C1C6R7BB01# 6.9pF Part Number ±0.5pF GJM0222C1C6R6DB01# ±0.25pF GJM0222C1C6R7CB01# 6.8pF Tol. ±0.5pF GJM0222C1C9R1DB01# 9.2pF ±0.05pF GJM0222C1C9R2WB01# ±0.5pF GJM0222C1C7R8DB01# ±0.1pF GJM0222C1C9R2BB01# ±0.05pF GJM0222C1C7R9WB01# ±0.25pF GJM0222C1C9R2CB01# ±0.5pF GJM0222C1C9R2DB01# ±0.1pF GJM0222C1C7R9BB01# ±0.25pF GJM0222C1C7R9CB01# ±0.5pF GJM0222C1C7R9DB01# 9.3pF ±0.05pF GJM0222C1C9R3WB01# ±0.1pF GJM0222C1C9R3BB01# Part number # indicates the package specification code. 88 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 0.4×0.2mm) ±0.05pF GJM0335C1E1R2WB01# ±0.1pF GJM0335C1E1R2BB01# 1.3pF ±0.5pF GJM0222C1C9R4DB01# ±0.1pF GJM0335C1E1R3BB01# ±0.25pF GJM0335C1E1R3CB01# 1.4pF ±0.1pF GJM0335C1E1R4BB01# ±0.5pF GJM0222C1C9R5DB01# ±0.25pF GJM0335C1E1R4CB01# ±0.05pF GJM0222C1C9R6WB01# 1.5pF ±0.1pF GJM0335C1E1R5BB01# ±0.25pF GJM0222C1C9R6CB01# ±0.25pF GJM0335C1E1R5CB01# 1.6pF ±0.1pF GJM0335C1E1R6BB01# ±0.1pF GJM0222C1C9R7BB01# ±0.25pF GJM0335C1E1R6CB01# 1.7pF ±0.1pF GJM0335C1E1R7BB01# ±0.05pF GJM0222C1C9R8WB01# ±0.25pF GJM0335C1E1R7CB01# 1.8pF ±0.05pF GJM0222C1C9R9WB01# ±0.25pF GJM0335C1E1R8CB01# 1.9pF 0.33mm 25Vdc C0G ±0.05pF GJM0335C1E1R9WB01# ±0.1pF GJM0222C1C9R9BB01# ±0.1pF GJM0335C1E1R9BB01# ±0.25pF GJM0222C1C9R9CB01# ±0.25pF GJM0335C1E1R9CB01# 2.0pF ±0.05pF GJM0335C1E2R0WB01# ±2% GJM0222C1C100GB01# ±0.1pF GJM0335C1E2R0BB01# ±5% GJM0222C1C100JB01# ±0.25pF GJM0335C1E2R0CB01# ±0.05pF GJM0335C1E2R1WB01# ±0.1pF GJM0335C1E2R1BB01# Ultracompact Cap. ±0.05pF GJM0335C1E1R8WB01# ±0.1pF GJM0335C1E1R8BB01# 2.1pF Rated TC Voltage Code ±0.05pF GJM0335C1E1R7WB01# ±0.5pF GJM0222C1C9R7DB01# ±0.5pF GJM0222C1C9R9DB01# T max. ±0.05pF GJM0335C1E1R6WB01# ±0.05pF GJM0222C1C9R7WB01# ±0.5pF GJM0222C1C9R8DB01# c 0.6×0.3mm ±0.05pF GJM0335C1E1R5WB01# ±0.1pF GJM0222C1C9R6BB01# ±0.1pF GJM0222C1C9R8BB01# 10pF ±0.05pF GJM0335C1E1R4WB01# ±0.25pF GJM0222C1C9R5CB01# ±0.25pF GJM0222C1C9R8CB01# 9.9pF ±0.05pF GJM0335C1E1R3WB01# ±0.05pF GJM0222C1C9R5WB01# ±0.25pF GJM0222C1C9R7CB01# 9.8pF ±0.25pF GJM0335C1E1R1CB01# 1.2pF ±0.25pF GJM0335C1E1R2CB01# ±0.5pF GJM0222C1C9R6DB01# 9.7pF 1.1pF ±0.1pF GJM0222C1C9R4BB01# ±0.1pF GJM0222C1C9R5BB01# 9.6pF Part Number ±0.05pF GJM0222C1C9R4WB01# ±0.25pF GJM0222C1C9R4CB01# 9.5pF C0G Tol. For General Purpose GRM Series 9.4pF 0.33mm 25Vdc Cap. Capacitor Array GNM Series ±0.5pF GJM0222C1C9R3DB01# Rated TC Voltage Code Low ESL LLp Series ±0.25pF GJM0222C1C9R3CB01# T max. High-Q Type GJM Series 9.3pF Part Number High Frequency GQM Series CH Tol. ±0.25pF GJM0335C1E2R1CB01# Tol. Part Number 2.2pF ±0.05pF GJM0335C1E2R2WB01# ±0.1pF GJM0335C1E2R2BB01# 0.2pF ±0.05pF GJM0335C1ER20WB01# 0.3pF ±0.05pF GJM0335C1ER30WB01# ±0.1pF GJM0335C1E2R3BB01# ±0.1pF GJM0335C1ER30BB01# ±0.25pF GJM0335C1E2R3CB01# ±0.1pF GJM0335C1ER20BB01# 0.4pF ±0.05pF GJM0335C1ER40WB01# ±0.25pF GJM0335C1E2R2CB01# 2.3pF 2.4pF ±0.05pF GJM0335C1E2R3WB01# ±0.05pF GJM0335C1E2R4WB01# ±0.1pF GJM0335C1ER40BB01# ±0.1pF GJM0335C1E2R4BB01# 0.5pF ±0.05pF GJM0335C1ER50WB01# ±0.25pF GJM0335C1E2R4CB01# 0.6pF ±0.05pF GJM0335C1ER60WB01# 0.7pF ±0.05pF GJM0335C1ER70WB01# ±0.1pF GJM0335C1ER70BB01# ±0.1pF GJM0335C1E2R6BB01# 0.8pF ±0.05pF GJM0335C1ER80WB01# ±0.25pF GJM0335C1E2R6CB01# ±0.1pF GJM0335C1ER50BB01# 2.5pF 0.9pF 1.0pF 1.1pF ±0.05pF GJM0335C1E2R5WB01# ±0.1pF GJM0335C1E2R5BB01# ±0.1pF GJM0335C1ER60BB01# ±0.1pF GJM0335C1ER80BB01# ±0.25pF GJM0335C1E2R5CB01# 2.6pF 2.7pF ±0.05pF GJM0335C1E2R6WB01# ±0.05pF GJM0335C1E2R7WB01# ±0.05pF GJM0335C1ER90WB01# ±0.1pF GJM0335C1E2R7BB01# ±0.1pF GJM0335C1ER90BB01# ±0.25pF GJM0335C1E2R7CB01# ±0.05pF GJM0335C1E1R0WB01# 2.8pF ±0.05pF GJM0335C1E2R8WB01# ±0.1pF GJM0335C1E1R0BB01# ±0.1pF GJM0335C1E2R8BB01# ±0.25pF GJM0335C1E1R0CB01# ±0.25pF GJM0335C1E2R8CB01# ±0.05pF GJM0335C1E1R1WB01# ±0.1pF GJM0335C1E1R1BB01# Monolithic Microchip GMA Series 0.22mm 16Vdc Cap. 2.9pF For Bonding GMD Series Rated TC Voltage Code Product Information T max. ±0.05pF GJM0335C1E2R9WB01# ±0.1pF GJM0335C1E2R9BB01# Part number # indicates the package specification code. 89 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 0.6×0.3mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.33mm 25Vdc C0G Cap. Tol. Part Number 2.9pF ±0.25pF GJM0335C1E2R9CB01# 3.0pF ±0.05pF GJM0335C1E3R0WB01# 3.1pF 3.2pF Capacitor Array GNM Series 3.3pF 3.4pF Rated TC Voltage Code 0.33mm 25Vdc C0G Cap. ±0.25pF GJM0335C1E4R7CB01# 4.8pF ±0.05pF GJM0335C1E4R8WB01# ±0.1pF GJM0335C1E4R8BB01# ±0.25pF GJM0335C1E3R0CB01# ±0.25pF GJM0335C1E4R8CB01# ±0.05pF GJM0335C1E3R1WB01# 4.9pF ±0.1pF GJM0335C1E3R1BB01# ±0.1pF GJM0335C1E4R9BB01# ±0.25pF GJM0335C1E4R9CB01# ±0.05pF GJM0335C1E3R2WB01# 5.0pF ±0.1pF GJM0335C1E5R0BB01# ±0.25pF GJM0335C1E3R2CB01# ±0.25pF GJM0335C1E5R0CB01# ±0.05pF GJM0335C1E3R3WB01# 5.1pF ±0.1pF GJM0335C1E5R1BB01# ±0.25pF GJM0335C1E3R3CB01# ±0.25pF GJM0335C1E5R1CB01# ±0.05pF GJM0335C1E3R4WB01# ±0.5pF GJM0335C1E5R1DB01# 5.2pF Low ESL LLp Series High-Q Type GJM Series High Frequency GQM Series Monolithic Microchip GMA Series 4.1pF ±0.1pF GJM0335C1E5R2BB01# ±0.05pF GJM0335C1E3R5WB01# ±0.25pF GJM0335C1E5R2CB01# ±0.5pF GJM0335C1E5R2DB01# 5.3pF ±0.1pF GJM0335C1E5R3BB01# ±0.1pF GJM0335C1E3R6BB01# ±0.25pF GJM0335C1E5R3CB01# ±0.05pF GJM0335C1E3R7WB01# ±0.5pF GJM0335C1E5R3DB01# 5.4pF ±0.1pF GJM0335C1E3R7BB01# ±0.1pF GJM0335C1E5R4BB01# ±0.25pF GJM0335C1E5R4CB01# ±0.05pF GJM0335C1E3R8WB01# ±0.5pF GJM0335C1E5R4DB01# 5.5pF ±0.1pF GJM0335C1E5R5BB01# ±0.05pF GJM0335C1E3R9WB01# ±0.25pF GJM0335C1E5R5CB01# ±0.5pF GJM0335C1E5R5DB01# 5.6pF ±0.1pF GJM0335C1E5R6BB01# ±0.1pF GJM0335C1E4R0BB01# ±0.25pF GJM0335C1E5R6CB01# ±0.05pF GJM0335C1E4R1WB01# ±0.5pF GJM0335C1E5R6DB01# 5.7pF ±0.1pF GJM0335C1E4R1BB01# ±0.1pF GJM0335C1E5R7BB01# ±0.25pF GJM0335C1E5R7CB01# ±0.05pF GJM0335C1E4R2WB01# ±0.5pF GJM0335C1E5R7DB01# 5.8pF ±0.05pF GJM0335C1E5R8WB01# ±0.25pF GJM0335C1E4R2CB01# ±0.1pF GJM0335C1E5R8BB01# ±0.05pF GJM0335C1E4R3WB01# ±0.25pF GJM0335C1E5R8CB01# ±0.1pF GJM0335C1E4R3BB01# ±0.5pF GJM0335C1E5R8DB01# For Bonding GMD Series 5.9pF ±0.05pF GJM0335C1E5R9WB01# ±0.05pF GJM0335C1E4R4WB01# ±0.1pF GJM0335C1E5R9BB01# ±0.1pF GJM0335C1E4R4BB01# ±0.25pF GJM0335C1E5R9CB01# ±0.05pF GJM0335C1E4R5WB01# ±0.5pF GJM0335C1E5R9DB01# 6.0pF ±0.05pF GJM0335C1E6R0WB01# Product Information ±0.1pF GJM0335C1E4R5BB01# ±0.1pF GJM0335C1E6R0BB01# ±0.25pF GJM0335C1E4R5CB01# ±0.25pF GJM0335C1E6R0CB01# ±0.05pF GJM0335C1E4R6WB01# ±0.1pF GJM0335C1E4R6BB01# 4.7pF ±0.05pF GJM0335C1E5R7WB01# ±0.25pF GJM0335C1E4R1CB01# ±0.25pF GJM0335C1E4R4CB01# 4.6pF ±0.05pF GJM0335C1E5R6WB01# ±0.05pF GJM0335C1E4R0WB01# ±0.25pF GJM0335C1E4R3CB01# 4.5pF ±0.05pF GJM0335C1E5R5WB01# ±0.25pF GJM0335C1E3R8CB01# ±0.1pF GJM0335C1E4R2BB01# 4.4pF ±0.05pF GJM0335C1E5R4WB01# ±0.25pF GJM0335C1E3R7CB01# ±0.25pF GJM0335C1E4R0CB01# 4.3pF ±0.05pF GJM0335C1E5R3WB01# ±0.05pF GJM0335C1E3R6WB01# ±0.1pF GJM0335C1E3R9BB01# 4.2pF ±0.05pF GJM0335C1E5R2WB01# ±0.25pF GJM0335C1E3R4CB01# ±0.25pF GJM0335C1E3R9CB01# 4.0pF ±0.05pF GJM0335C1E5R1WB01# ±0.1pF GJM0335C1E3R3BB01# ±0.1pF GJM0335C1E3R8BB01# 3.9pF ±0.05pF GJM0335C1E5R0WB01# ±0.1pF GJM0335C1E3R2BB01# ±0.25pF GJM0335C1E3R6CB01# 3.8pF ±0.05pF GJM0335C1E4R9WB01# ±0.25pF GJM0335C1E3R1CB01# ±0.25pF GJM0335C1E3R5CB01# 3.7pF Part Number 4.7pF ±0.1pF GJM0335C1E3R5BB01# 3.6pF Tol. ±0.1pF GJM0335C1E3R0BB01# ±0.1pF GJM0335C1E3R4BB01# 3.5pF T max. ±0.5pF GJM0335C1E6R0DB01# 6.1pF ±0.05pF GJM0335C1E6R1WB01# ±0.25pF GJM0335C1E4R6CB01# ±0.1pF GJM0335C1E6R1BB01# ±0.05pF GJM0335C1E4R7WB01# ±0.25pF GJM0335C1E6R1CB01# ±0.1pF GJM0335C1E4R7BB01# ±0.5pF GJM0335C1E6R1DB01# Part number # indicates the package specification code. 90 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 0.6×0.3mm) C0H 6.3pF ±0.25pF GJM0336C1E7R5CB01# 7.6pF ±0.05pF GJM0336C1E7R6WB01# ±0.5pF GJM0336C1E7R5DB01# ±0.5pF GJM0335C1E6R2DB01# ±0.1pF GJM0336C1E7R6BB01# ±0.05pF GJM0335C1E6R3WB01# ±0.25pF GJM0336C1E7R6CB01# ±0.1pF GJM0335C1E6R3BB01# ±0.25pF GJM0335C1E6R3CB01# 6.4pF ±0.5pF GJM0336C1E7R6DB01# 7.7pF ±0.5pF GJM0335C1E6R3DB01# ±0.1pF GJM0336C1E7R7BB01# ±0.25pF GJM0336C1E7R7CB01# ±0.1pF GJM0335C1E6R4BB01# ±0.5pF GJM0336C1E7R7DB01# 7.8pF ±0.1pF GJM0336C1E7R8BB01# ±0.05pF GJM0335C1E6R5WB01# ±0.25pF GJM0336C1E7R8CB01# ±0.1pF GJM0335C1E6R5BB01# ±0.5pF GJM0336C1E7R8DB01# 7.9pF ±0.1pF GJM0336C1E7R9BB01# ±0.05pF GJM0335C1E6R6WB01# ±0.25pF GJM0336C1E7R9CB01# ±0.25pF GJM0335C1E6R6CB01# ±0.5pF GJM0336C1E7R9DB01# 8.0pF ±0.5pF GJM0335C1E6R6DB01# ±0.1pF GJM0336C1E8R0BB01# ±0.25pF GJM0336C1E8R0CB01# ±0.1pF GJM0335C1E6R7BB01# 6.9pF ±0.5pF GJM0336C1E8R0DB01# 8.1pF ±0.5pF GJM0335C1E6R7DB01# ±0.1pF GJM0336C1E8R1BB01# ±0.25pF GJM0336C1E8R1CB01# ±0.1pF GJM0335C1E6R8BB01# ±0.5pF GJM0336C1E8R1DB01# 8.2pF ±0.1pF GJM0336C1E8R2BB01# ±0.05pF GJM0336C1E6R9WB01# ±0.25pF GJM0336C1E8R2CB01# ±0.1pF GJM0336C1E6R9BB01# ±0.5pF GJM0336C1E8R2DB01# 8.3pF ±0.5pF GJM0336C1E6R9DB01# ±0.1pF GJM0336C1E8R3BB01# ±0.25pF GJM0336C1E8R3CB01# ±0.1pF GJM0336C1E7R0BB01# ±0.5pF GJM0336C1E8R3DB01# 8.4pF ±0.5pF GJM0336C1E7R0DB01# ±0.1pF GJM0336C1E8R4BB01# ±0.25pF GJM0336C1E8R4CB01# ±0.1pF GJM0336C1E7R1BB01# ±0.5pF GJM0336C1E8R4DB01# 8.5pF ±0.5pF GJM0336C1E7R1DB01# ±0.1pF GJM0336C1E8R5BB01# ±0.25pF GJM0336C1E8R5CB01# ±0.1pF GJM0336C1E7R2BB01# ±0.5pF GJM0336C1E8R5DB01# 8.6pF ±0.1pF GJM0336C1E8R6BB01# ±0.05pF GJM0336C1E7R3WB01# ±0.25pF GJM0336C1E8R6CB01# ±0.1pF GJM0336C1E7R3BB01# ±0.5pF GJM0336C1E8R6DB01# 8.7pF ±0.05pF GJM0336C1E8R7WB01# ±0.5pF GJM0336C1E7R3DB01# ±0.1pF GJM0336C1E8R7BB01# ±0.05pF GJM0336C1E7R4WB01# ±0.25pF GJM0336C1E8R7CB01# ±0.1pF GJM0336C1E7R4BB01# ±0.25pF GJM0336C1E7R4CB01# 7.5pF ±0.05pF GJM0336C1E8R6WB01# ±0.5pF GJM0336C1E7R2DB01# ±0.25pF GJM0336C1E7R3CB01# 7.4pF ±0.05pF GJM0336C1E8R5WB01# ±0.05pF GJM0336C1E7R2WB01# ±0.25pF GJM0336C1E7R2CB01# 7.3pF ±0.05pF GJM0336C1E8R4WB01# ±0.05pF GJM0336C1E7R1WB01# ±0.25pF GJM0336C1E7R1CB01# 7.2pF ±0.05pF GJM0336C1E8R3WB01# ±0.05pF GJM0336C1E7R0WB01# ±0.25pF GJM0336C1E7R0CB01# 7.1pF ±0.05pF GJM0336C1E8R2WB01# ±0.5pF GJM0335C1E6R8DB01# ±0.25pF GJM0336C1E6R9CB01# 7.0pF ±0.05pF GJM0336C1E8R1WB01# ±0.05pF GJM0335C1E6R8WB01# ±0.25pF GJM0335C1E6R8CB01# C0H ±0.05pF GJM0336C1E8R0WB01# ±0.05pF GJM0335C1E6R7WB01# ±0.25pF GJM0335C1E6R7CB01# 6.8pF ±0.05pF GJM0336C1E7R9WB01# ±0.5pF GJM0335C1E6R5DB01# ±0.1pF GJM0335C1E6R6BB01# 6.7pF ±0.05pF GJM0336C1E7R8WB01# ±0.5pF GJM0335C1E6R4DB01# ±0.25pF GJM0335C1E6R5CB01# 6.6pF ±0.05pF GJM0336C1E7R7WB01# ±0.05pF GJM0335C1E6R4WB01# ±0.25pF GJM0335C1E6R4CB01# 6.5pF Part Number 7.5pF ±0.1pF GJM0335C1E6R2BB01# ±0.25pF GJM0335C1E6R2CB01# Tol. ±0.5pF GJM0336C1E8R7DB01# 8.8pF ±0.05pF GJM0336C1E8R8WB01# ±0.5pF GJM0336C1E7R4DB01# ±0.1pF GJM0336C1E8R8BB01# ±0.05pF GJM0336C1E7R5WB01# ±0.25pF GJM0336C1E8R8CB01# ±0.1pF GJM0336C1E7R5BB01# For General Purpose GRM Series 0.33mm 25Vdc Cap. Capacitor Array GNM Series Rated TC Voltage Code Low ESL LLp Series ±0.05pF GJM0335C1E6R2WB01# T max. High-Q Type GJM Series 6.2pF Part Number High Frequency GQM Series C0G Tol. Monolithic Microchip GMA Series 0.33mm 25Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. ±0.5pF GJM0336C1E8R8DB01# Part number # indicates the package specification code. 91 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 0.6×0.3mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.33mm 25Vdc C0H Cap. 8.9pF Tol. Part Number ±0.05pF GJM0336C1E8R9WB01# T max. Rated TC Voltage Code 0.33mm 25Vdc C0H Cap. Tol. 16pF ±2% GJM0336C1E160GB01# ±5% GJM0336C1E160JB01# ±2% GJM0336C1E180GB01# ±5% GJM0336C1E180JB01# ±2% GJM0336C1E200GB01# ±5% GJM0336C1E200JB01# ±0.1pF GJM0336C1E8R9BB01# ±0.25pF GJM0336C1E8R9CB01# 18pF ±0.5pF GJM0336C1E8R9DB01# 9.0pF ±0.05pF GJM0336C1E9R0WB01# 20pF ±0.1pF GJM0336C1E9R0BB01# ±0.25pF GJM0336C1E9R0CB01# CK 0.2pF ±0.05pF GJM0334C1ER20WB01# 0.3pF ±0.05pF GJM0334C1ER30WB01# ±0.5pF GJM0336C1E9R0DB01# Capacitor Array GNM Series 9.1pF ±0.05pF GJM0336C1E9R1WB01# ±0.1pF GJM0334C1ER20BB01# ±0.1pF GJM0336C1E9R1BB01# ±0.25pF GJM0336C1E9R1CB01# ±0.1pF GJM0334C1ER30BB01# 0.4pF ±0.05pF GJM0334C1ER40WB01# 0.5pF ±0.05pF GJM0334C1ER50WB01# 0.6pF ±0.05pF GJM0334C1ER60WB01# ±0.5pF GJM0336C1E9R1DB01# 9.2pF ±0.05pF GJM0336C1E9R2WB01# ±0.1pF GJM0334C1ER40BB01# ±0.1pF GJM0336C1E9R2BB01# ±0.25pF GJM0336C1E9R2CB01# ±0.1pF GJM0334C1ER50BB01# Low ESL LLp Series ±0.5pF GJM0336C1E9R2DB01# 9.3pF ±0.05pF GJM0336C1E9R3WB01# ±0.1pF GJM0334C1ER60BB01# 0.7pF ±0.05pF GJM0334C1ER70WB01# 0.8pF ±0.05pF GJM0334C1ER80WB01# 0.9pF ±0.05pF GJM0334C1ER90WB01# 1.0pF ±0.05pF GJM0334C1E1R0WB01# ±0.1pF GJM0336C1E9R3BB01# ±0.25pF GJM0336C1E9R3CB01# ±0.1pF GJM0334C1ER70BB01# ±0.5pF GJM0336C1E9R3DB01# 9.4pF ±0.05pF GJM0336C1E9R4WB01# ±0.1pF GJM0334C1ER80BB01# ±0.1pF GJM0336C1E9R4BB01# High-Q Type GJM Series ±0.25pF GJM0336C1E9R4CB01# 9.5pF ±0.5pF GJM0336C1E9R4DB01# ±0.1pF GJM0334C1E1R0BB01# ±0.25pF GJM0334C1E1R0CB01# ±0.1pF GJM0334C1E1R1BB01# ±0.25pF GJM0334C1E1R1CB01# High Frequency GQM Series ±0.05pF GJM0336C1E9R6WB01# 1.2pF ±0.1pF GJM0334C1E1R2BB01# ±0.25pF GJM0336C1E9R6CB01# ±0.25pF GJM0334C1E1R2CB01# 1.3pF ±0.1pF GJM0334C1E1R3BB01# ±0.1pF GJM0336C1E9R7BB01# ±0.25pF GJM0334C1E1R3CB01# Monolithic Microchip GMA Series 1.4pF ±0.05pF GJM0334C1E1R4WB01# ±0.5pF GJM0336C1E9R7DB01# ±0.1pF GJM0334C1E1R4BB01# ±0.05pF GJM0336C1E9R8WB01# ±0.25pF GJM0334C1E1R4CB01# 1.5pF ±0.05pF GJM0334C1E1R5WB01# ±0.25pF GJM0336C1E9R8CB01# ±0.1pF GJM0334C1E1R5BB01# ±0.5pF GJM0336C1E9R8DB01# ±0.25pF GJM0334C1E1R5CB01# ±0.05pF GJM0336C1E9R9WB01# 1.6pF For Bonding GMD Series ±0.5pF GJM0336C1E9R9DB01# ±0.05pF GJM0334C1E1R6WB01# ±0.1pF GJM0334C1E1R6BB01# ±0.25pF GJM0336C1E9R9CB01# 11pF ±0.05pF GJM0334C1E1R3WB01# ±0.05pF GJM0336C1E9R7WB01# ±0.1pF GJM0336C1E9R9BB01# 10pF ±0.05pF GJM0334C1E1R2WB01# ±0.1pF GJM0336C1E9R6BB01# ±0.1pF GJM0336C1E9R8BB01# 9.9pF ±0.05pF GJM0334C1E1R1WB01# ±0.5pF GJM0336C1E9R5DB01# ±0.25pF GJM0336C1E9R7CB01# 9.8pF 1.1pF ±0.25pF GJM0336C1E9R5CB01# ±0.5pF GJM0336C1E9R6DB01# 9.7pF ±0.1pF GJM0334C1ER90BB01# ±0.05pF GJM0336C1E9R5WB01# ±0.1pF GJM0336C1E9R5BB01# 9.6pF Part Number ±0.25pF GJM0334C1E1R6CB01# 1.7pF ±0.05pF GJM0334C1E1R7WB01# ±2% GJM0336C1E100GB01# ±0.1pF GJM0334C1E1R7BB01# ±5% GJM0336C1E100JB01# ±0.25pF GJM0334C1E1R7CB01# ±2% GJM0336C1E110GB01# 1.8pF ±0.05pF GJM0334C1E1R8WB01# Product Information ±5% GJM0336C1E110JB01# ±0.1pF GJM0334C1E1R8BB01# 12pF ±2% GJM0336C1E120GB01# ±0.25pF GJM0334C1E1R8CB01# ±5% GJM0336C1E120JB01# 13pF ±2% GJM0336C1E130GB01# ±0.1pF GJM0334C1E1R9BB01# ±5% GJM0336C1E130JB01# ±0.25pF GJM0334C1E1R9CB01# ±2% GJM0336C1E150GB01# ±5% GJM0336C1E150JB01# 15pF 1.9pF 2.0pF ±0.05pF GJM0334C1E1R9WB01# ±0.05pF GJM0334C1E2R0WB01# ±0.1pF GJM0334C1E2R0BB01# Part number # indicates the package specification code. 92 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 0.6×0.3mm) ±0.05pF GJM0333C1E2R1WB01# 2.2pF 2.3pF 2.4pF 2.5pF 2.6pF 2.7pF 0.33mm 25Vdc CJ ±0.25pF GJM0333C1E3R8CB01# 3.9pF ±0.05pF GJM0333C1E3R9WB01# ±0.1pF GJM0333C1E2R1BB01# ±0.1pF GJM0333C1E3R9BB01# ±0.25pF GJM0333C1E2R1CB01# ±0.25pF GJM0333C1E3R9CB01# ±0.05pF GJM0333C1E2R2WB01# CH 4.0pF 3.0pF 3.1pF 3.2pF 3.3pF 3.4pF ±0.1pF GJM0333C1E2R2BB01# ±0.1pF GJM0332C1E4R0BB01# ±0.25pF GJM0332C1E4R0CB01# ±0.05pF GJM0333C1E2R3WB01# 4.1pF ±0.1pF GJM0332C1E4R1BB01# ±0.25pF GJM0333C1E2R3CB01# ±0.25pF GJM0332C1E4R1CB01# ±0.05pF GJM0333C1E2R4WB01# 4.2pF ±0.1pF GJM0332C1E4R2BB01# ±0.25pF GJM0333C1E2R4CB01# ±0.25pF GJM0332C1E4R2CB01# ±0.05pF GJM0333C1E2R5WB01# 4.3pF ±0.1pF GJM0332C1E4R3BB01# ±0.25pF GJM0333C1E2R5CB01# ±0.25pF GJM0332C1E4R3CB01# ±0.05pF GJM0333C1E2R6WB01# 4.4pF ±0.05pF GJM0332C1E4R4WB01# ±0.1pF GJM0333C1E2R6BB01# ±0.1pF GJM0332C1E4R4BB01# ±0.25pF GJM0333C1E2R6CB01# ±0.25pF GJM0332C1E4R4CB01# ±0.05pF GJM0333C1E2R7WB01# 4.5pF ±0.05pF GJM0333C1E2R8WB01# ±0.05pF GJM0332C1E4R5WB01# ±0.1pF GJM0332C1E4R5BB01# ±0.25pF GJM0332C1E4R5CB01# 4.6pF ±0.05pF GJM0332C1E4R6WB01# ±0.1pF GJM0333C1E2R8BB01# ±0.1pF GJM0332C1E4R6BB01# ±0.25pF GJM0333C1E2R8CB01# ±0.25pF GJM0332C1E4R6CB01# ±0.05pF GJM0333C1E2R9WB01# 4.7pF ±0.05pF GJM0332C1E4R7WB01# ±0.1pF GJM0333C1E2R9BB01# ±0.1pF GJM0332C1E4R7BB01# ±0.25pF GJM0333C1E2R9CB01# ±0.25pF GJM0332C1E4R7CB01# ±0.05pF GJM0333C1E3R0WB01# 4.8pF ±0.05pF GJM0332C1E4R8WB01# ±0.1pF GJM0333C1E3R0BB01# ±0.1pF GJM0332C1E4R8BB01# ±0.25pF GJM0333C1E3R0CB01# ±0.25pF GJM0332C1E4R8CB01# ±0.05pF GJM0333C1E3R1WB01# 4.9pF ±0.05pF GJM0332C1E4R9WB01# ±0.1pF GJM0333C1E3R1BB01# ±0.1pF GJM0332C1E4R9BB01# ±0.25pF GJM0333C1E3R1CB01# ±0.25pF GJM0332C1E4R9CB01# ±0.05pF GJM0333C1E3R2WB01# 5.0pF ±0.05pF GJM0332C1E5R0WB01# ±0.1pF GJM0333C1E3R2BB01# ±0.1pF GJM0332C1E5R0BB01# ±0.25pF GJM0333C1E3R2CB01# ±0.25pF GJM0332C1E5R0CB01# ±0.05pF GJM0333C1E3R3WB01# 5.1pF ±0.05pF GJM0332C1E5R1WB01# ±0.1pF GJM0333C1E3R3BB01# ±0.1pF GJM0332C1E5R1BB01# ±0.25pF GJM0333C1E3R3CB01# ±0.25pF GJM0332C1E5R1CB01# ±0.05pF GJM0333C1E3R4WB01# ±0.5pF GJM0332C1E5R1DB01# 5.2pF ±0.05pF GJM0332C1E5R2WB01# ±0.25pF GJM0333C1E3R4CB01# ±0.1pF GJM0332C1E5R2BB01# ±0.05pF GJM0333C1E3R5WB01# ±0.25pF GJM0332C1E5R2CB01# ±0.5pF GJM0332C1E5R2DB01# 5.3pF ±0.05pF GJM0332C1E5R3WB01# ±0.05pF GJM0333C1E3R6WB01# ±0.1pF GJM0332C1E5R3BB01# ±0.1pF GJM0333C1E3R6BB01# ±0.25pF GJM0332C1E5R3CB01# ±0.25pF GJM0333C1E3R6CB01# 3.8pF ±0.05pF GJM0332C1E4R3WB01# ±0.1pF GJM0333C1E2R5BB01# ±0.1pF GJM0333C1E3R5BB01# 3.7pF ±0.05pF GJM0332C1E4R2WB01# ±0.1pF GJM0333C1E2R4BB01# ±0.25pF GJM0333C1E3R5CB01# 3.6pF ±0.05pF GJM0332C1E4R1WB01# ±0.1pF GJM0333C1E2R3BB01# ±0.1pF GJM0333C1E3R4BB01# 3.5pF ±0.05pF GJM0332C1E4R0WB01# ±0.25pF GJM0333C1E2R2CB01# ±0.25pF GJM0333C1E2R7CB01# 2.9pF Part Number 3.8pF ±0.1pF GJM0333C1E2R7BB01# 2.8pF Tol. ±0.05pF GJM0333C1E3R7WB01# ±0.5pF GJM0332C1E5R3DB01# 5.4pF ±0.05pF GJM0332C1E5R4WB01# ±0.1pF GJM0333C1E3R7BB01# ±0.1pF GJM0332C1E5R4BB01# ±0.25pF GJM0333C1E3R7CB01# ±0.25pF GJM0332C1E5R4CB01# ±0.05pF GJM0333C1E3R8WB01# ±0.5pF GJM0332C1E5R4DB01# ±0.1pF GJM0333C1E3R8BB01# For General Purpose GRM Series ±0.25pF GJM0334C1E2R0CB01# 2.1pF Cap. Capacitor Array GNM Series 2.0pF CJ Rated TC Voltage Code Low ESL LLp Series CK T max. High-Q Type GJM Series Part Number High Frequency GQM Series Tol. Monolithic Microchip GMA Series 0.33mm 25Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. 5.5pF ±0.05pF GJM0332C1E5R5WB01# Part number # indicates the package specification code. 93 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 0.6×0.3mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.33mm 25Vdc CH Cap. 5.5pF Tol. Part Number ±0.1pF GJM0332C1E5R5BB01# ±0.25pF GJM0332C1E5R5CB01# 5.6pF Rated TC Voltage Code 0.33mm 25Vdc CH Cap. 6.8pF ±0.5pF GJM0332C1E6R8DB01# 6.9pF ±0.05pF GJM0332C1E6R9WB01# ±0.1pF GJM0332C1E6R9BB01# ±0.25pF GJM0332C1E6R9CB01# ±0.1pF GJM0332C1E5R6BB01# ±0.5pF GJM0332C1E6R9DB01# 7.0pF ±0.1pF GJM0332C1E7R0BB01# ±0.05pF GJM0332C1E5R7WB01# ±0.25pF GJM0332C1E7R0CB01# Capacitor Array GNM Series ±0.5pF GJM0332C1E7R0DB01# 7.1pF ±0.5pF GJM0332C1E5R7DB01# ±0.1pF GJM0332C1E7R1BB01# ±0.25pF GJM0332C1E7R1CB01# ±0.1pF GJM0332C1E5R8BB01# ±0.5pF GJM0332C1E7R1DB01# 7.2pF Low ESL LLp Series ±0.1pF GJM0332C1E7R2BB01# ±0.05pF GJM0332C1E5R9WB01# ±0.25pF GJM0332C1E7R2CB01# ±0.1pF GJM0332C1E5R9BB01# ±0.5pF GJM0332C1E7R2DB01# 7.3pF ±0.5pF GJM0332C1E5R9DB01# ±0.1pF GJM0332C1E7R3BB01# ±0.25pF GJM0332C1E7R3CB01# ±0.1pF GJM0332C1E6R0BB01# ±0.5pF GJM0332C1E7R3DB01# 7.4pF High-Q Type GJM Series ±0.1pF GJM0332C1E7R4BB01# ±0.05pF GJM0332C1E6R1WB01# ±0.25pF GJM0332C1E7R4CB01# ±0.1pF GJM0332C1E6R1BB01# ±0.5pF GJM0332C1E7R4DB01# 7.5pF ±0.5pF GJM0332C1E6R1DB01# ±0.1pF GJM0332C1E7R5BB01# ±0.25pF GJM0332C1E7R5CB01# High Frequency GQM Series ±0.1pF GJM0332C1E6R2BB01# ±0.5pF GJM0332C1E7R5DB01# 7.6pF ±0.1pF GJM0332C1E7R6BB01# ±0.05pF GJM0332C1E6R3WB01# ±0.25pF GJM0332C1E7R6CB01# ±0.25pF GJM0332C1E6R3CB01# ±0.5pF GJM0332C1E7R6DB01# 7.7pF Monolithic Microchip GMA Series ±0.5pF GJM0332C1E6R3DB01# ±0.1pF GJM0332C1E7R7BB01# ±0.25pF GJM0332C1E7R7CB01# ±0.1pF GJM0332C1E6R4BB01# ±0.5pF GJM0332C1E7R7DB01# 7.8pF ±0.1pF GJM0332C1E7R8BB01# ±0.05pF GJM0332C1E6R5WB01# ±0.25pF GJM0332C1E7R8CB01# ±0.1pF GJM0332C1E6R5BB01# ±0.5pF GJM0332C1E7R8DB01# 7.9pF ±0.05pF GJM0332C1E7R9WB01# For Bonding GMD Series ±0.5pF GJM0332C1E6R5DB01# ±0.1pF GJM0332C1E7R9BB01# ±0.05pF GJM0332C1E6R6WB01# ±0.25pF GJM0332C1E7R9CB01# ±0.1pF GJM0332C1E6R6BB01# ±0.25pF GJM0332C1E6R6CB01# ±0.5pF GJM0332C1E7R9DB01# 8.0pF ±0.05pF GJM0332C1E8R0WB01# ±0.5pF GJM0332C1E6R6DB01# ±0.1pF GJM0332C1E8R0BB01# ±0.05pF GJM0332C1E6R7WB01# ±0.25pF GJM0332C1E8R0CB01# Product Information ±0.1pF GJM0332C1E6R7BB01# ±0.25pF GJM0332C1E6R7CB01# 6.8pF ±0.05pF GJM0332C1E7R8WB01# ±0.5pF GJM0332C1E6R4DB01# ±0.25pF GJM0332C1E6R5CB01# 6.7pF ±0.05pF GJM0332C1E7R7WB01# ±0.05pF GJM0332C1E6R4WB01# ±0.25pF GJM0332C1E6R4CB01# 6.6pF ±0.05pF GJM0332C1E7R6WB01# ±0.5pF GJM0332C1E6R2DB01# ±0.1pF GJM0332C1E6R3BB01# 6.5pF ±0.05pF GJM0332C1E7R5WB01# ±0.05pF GJM0332C1E6R2WB01# ±0.25pF GJM0332C1E6R2CB01# 6.4pF ±0.05pF GJM0332C1E7R4WB01# ±0.5pF GJM0332C1E6R0DB01# ±0.25pF GJM0332C1E6R1CB01# 6.3pF ±0.05pF GJM0332C1E7R3WB01# ±0.05pF GJM0332C1E6R0WB01# ±0.25pF GJM0332C1E6R0CB01# 6.2pF ±0.05pF GJM0332C1E7R2WB01# ±0.5pF GJM0332C1E5R8DB01# ±0.25pF GJM0332C1E5R9CB01# 6.1pF ±0.05pF GJM0332C1E7R1WB01# ±0.05pF GJM0332C1E5R8WB01# ±0.25pF GJM0332C1E5R8CB01# 6.0pF ±0.05pF GJM0332C1E7R0WB01# ±0.5pF GJM0332C1E5R6DB01# ±0.1pF GJM0332C1E5R7BB01# 5.9pF Part Number ±0.5pF GJM0332C1E5R5DB01# ±0.25pF GJM0332C1E5R7CB01# 5.8pF Tol. ±0.05pF GJM0332C1E5R6WB01# ±0.25pF GJM0332C1E5R6CB01# 5.7pF T max. ±0.5pF GJM0332C1E8R0DB01# 8.1pF ±0.05pF GJM0332C1E8R1WB01# ±0.5pF GJM0332C1E6R7DB01# ±0.1pF GJM0332C1E8R1BB01# ±0.05pF GJM0332C1E6R8WB01# ±0.25pF GJM0332C1E8R1CB01# ±0.1pF GJM0332C1E6R8BB01# ±0.5pF GJM0332C1E8R1DB01# ±0.25pF GJM0332C1E6R8CB01# 8.2pF ±0.05pF GJM0332C1E8R2WB01# Part number # indicates the package specification code. 94 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 0.6×0.3mm) CH 8.3pF 9.5pF ±0.5pF GJM0332C1E9R5DB01# 9.6pF ±0.05pF GJM0332C1E9R6WB01# ±0.5pF GJM0332C1E8R2DB01# ±0.1pF GJM0332C1E9R6BB01# ±0.25pF GJM0332C1E9R6CB01# ±0.1pF GJM0332C1E8R3BB01# ±0.5pF GJM0332C1E9R6DB01# 9.7pF ±0.1pF GJM0332C1E9R7BB01# ±0.05pF GJM0332C1E8R4WB01# ±0.25pF GJM0332C1E9R7CB01# ±0.1pF GJM0332C1E8R4BB01# ±0.5pF GJM0332C1E9R7DB01# 9.8pF ±0.5pF GJM0332C1E8R4DB01# ±0.1pF GJM0332C1E9R8BB01# ±0.25pF GJM0332C1E9R8CB01# ±0.1pF GJM0332C1E8R5BB01# ±0.5pF GJM0332C1E9R8DB01# 9.9pF ±0.1pF GJM0332C1E9R9BB01# ±0.05pF GJM0332C1E8R6WB01# ±0.25pF GJM0332C1E9R9CB01# ±0.1pF GJM0332C1E8R6BB01# ±0.5pF GJM0332C1E9R9DB01# ±2% GJM0332C1E100GB01# ±5% GJM0332C1E100JB01# ±2% GJM0332C1E110GB01# ±5% GJM0332C1E110JB01# ±2% GJM0332C1E120GB01# ±5% GJM0332C1E120JB01# ±2% GJM0332C1E130GB01# ±5% GJM0332C1E130JB01# 15pF ±2% GJM0332C1E150GB01# ±5% GJM0332C1E150JB01# 16pF ±2% GJM0332C1E160GB01# ±5% GJM0332C1E160JB01# ±2% GJM0332C1E180GB01# ±5% GJM0332C1E180JB01# ±2% GJM0332C1E200GB01# ±5% GJM0332C1E200JB01# ±2% GJM0335C0J220GB01# ±5% GJM0335C0J220JB01# ±2% GJM0335C0J240GB01# ±5% GJM0335C0J240JB01# ±2% GJM0335C0J270GB01# ±5% GJM0335C0J270JB01# ±2% GJM0335C0J300GB01# ±5% GJM0335C0J300JB01# 33pF ±2% GJM0335C0J330GB01# ±5% GJM0335C0J330JB01# 22pF ±2% GJM0332C0J220GB01# ±5% GJM0332C0J220JB01# ±2% GJM0332C0J240GB01# ±5% GJM0332C0J240JB01# ±2% GJM0332C0J270GB01# ±5% GJM0332C0J270JB01# ±2% GJM0332C0J300GB01# ±5% GJM0332C0J300JB01# ±2% GJM0332C0J330GB01# ±5% GJM0332C0J330JB01# 10pF ±0.5pF GJM0332C1E8R6DB01# ±0.05pF GJM0332C1E8R7WB01# 11pF ±0.1pF GJM0332C1E8R7BB01# ±0.25pF GJM0332C1E8R7CB01# 12pF ±0.5pF GJM0332C1E8R7DB01# 8.8pF ±0.05pF GJM0332C1E8R8WB01# 13pF ±0.1pF GJM0332C1E8R8BB01# ±0.25pF GJM0332C1E8R8CB01# ±0.5pF GJM0332C1E8R8DB01# 8.9pF ±0.05pF GJM0332C1E8R9WB01# ±0.1pF GJM0332C1E8R9BB01# ±0.25pF GJM0332C1E8R9CB01# 18pF ±0.5pF GJM0332C1E8R9DB01# 9.0pF ±0.05pF GJM0332C1E9R0WB01# 20pF ±0.1pF GJM0332C1E9R0BB01# ±0.25pF GJM0332C1E9R0CB01# 6.3Vdc C0G 22pF ±0.5pF GJM0332C1E9R0DB01# 9.1pF ±0.05pF GJM0332C1E9R1WB01# 24pF ±0.1pF GJM0332C1E9R1BB01# ±0.25pF GJM0332C1E9R1CB01# 27pF ±0.5pF GJM0332C1E9R1DB01# 9.2pF ±0.05pF GJM0332C1E9R2WB01# 30pF ±0.1pF GJM0332C1E9R2BB01# ±0.25pF GJM0332C1E9R2CB01# ±0.5pF GJM0332C1E9R2DB01# 9.3pF ±0.05pF GJM0332C1E9R3WB01# CH ±0.1pF GJM0332C1E9R3BB01# ±0.25pF GJM0332C1E9R3CB01# 24pF ±0.5pF GJM0332C1E9R3DB01# 9.4pF ±0.05pF GJM0332C1E9R4WB01# 27pF ±0.1pF GJM0332C1E9R4BB01# ±0.25pF GJM0332C1E9R4CB01# 30pF ±0.5pF GJM0332C1E9R4DB01# 9.5pF ±0.05pF GJM0332C1E9R9WB01# ±0.5pF GJM0332C1E8R5DB01# ±0.25pF GJM0332C1E8R6CB01# 8.7pF ±0.05pF GJM0332C1E9R8WB01# ±0.05pF GJM0332C1E8R5WB01# ±0.25pF GJM0332C1E8R5CB01# 8.6pF ±0.05pF GJM0332C1E9R7WB01# ±0.5pF GJM0332C1E8R3DB01# ±0.25pF GJM0332C1E8R4CB01# 8.5pF Part Number ±0.05pF GJM0332C1E8R3WB01# ±0.25pF GJM0332C1E8R3CB01# 8.4pF Tol. ±0.05pF GJM0332C1E9R5WB01# ±0.1pF GJM0332C1E9R5BB01# For General Purpose GRM Series 0.33mm 25Vdc ±0.25pF GJM0332C1E8R2CB01# Cap. Capacitor Array GNM Series Rated TC Voltage Code Low ESL LLp Series ±0.1pF GJM0332C1E8R2BB01# T max. 33pF High-Q Type GJM Series 8.2pF Part Number High Frequency GQM Series CH Tol. Monolithic Microchip GMA Series 0.33mm 25Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. ±0.25pF GJM0332C1E9R5CB01# Part number # indicates the package specification code. 95 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type T max. c 1.0×0.5mm For General Purpose GRM Series T max. Rated TC Voltage Code 0.55mm 50Vdc C0G Cap. Tol. Part Number HiQ Rated TC Voltage Code 0.55mm 50Vdc C0G Oct.1,2012 Part Number List Cap. 2.1pF Tol. Part Number ±0.1pF GJM1555C1H2R1BB01# ±0.25pF GJM1555C1H2R1CB01# 0.1pF ±0.05pF GJM1555C1HR10WB01# 2.2pF ±0.05pF GJM1555C1H2R2WB01# ±0.1pF GJM1555C1HR10BB01# ±0.1pF GJM1555C1H2R2BB01# 0.2pF ±0.05pF GJM1555C1HR20WB01# ±0.25pF GJM1555C1H2R2CB01# 0.3pF ±0.05pF GJM1555C1HR30WB01# ±0.1pF GJM1555C1H2R3BB01# ±0.1pF GJM1555C1HR30BB01# ±0.25pF GJM1555C1H2R3CB01# ±0.1pF GJM1555C1HR20BB01# Capacitor Array GNM Series 0.4pF ±0.05pF GJM1555C1HR40WB01# 2.3pF 2.4pF ±0.1pF GJM1555C1HR40BB01# 0.5pF 0.6pF 0.7pF ±0.25pF GJM1555C1H2R4CB01# 2.5pF ±0.1pF GJM1555C1H2R5BB01# ±0.1pF GJM1555C1HR60BB01# ±0.25pF GJM1555C1H2R5CB01# ±0.05pF GJM1555C1HR70WB01# 2.6pF Low ESL LLp Series 1.0pF High-Q Type GJM Series 1.1pF 1.2pF High Frequency GQM Series 1.3pF ±0.25pF GJM1555C1H2R6CB01# 2.7pF ±0.1pF GJM1555C1H2R7BB01# ±0.1pF GJM1555C1HR90BB01# ±0.25pF GJM1555C1H2R7CB01# ±0.05pF GJM1555C1H1R0WB01# 2.8pF ±0.1pF GJM1555C1H1R0BB01# ±0.1pF GJM1555C1H2R8BB01# ±0.25pF GJM1555C1H2R8CB01# ±0.05pF GJM1555C1H1R1WB01# 2.9pF ±0.1pF GJM1555C1H2R9BB01# ±0.25pF GJM1555C1H1R1CB01# ±0.25pF GJM1555C1H2R9CB01# ±0.05pF GJM1555C1H1R2WB01# 3.0pF Monolithic Microchip GMA Series For Bonding GMD Series 1.8pF 1.9pF Product Information 2.0pF 2.1pF ±0.05pF GJM1555C1H3R0WB01# ±0.1pF GJM1555C1H1R2BB01# ±0.1pF GJM1555C1H3R0BB01# ±0.25pF GJM1555C1H1R2CB01# ±0.25pF GJM1555C1H3R0CB01# ±0.05pF GJM1555C1H1R3WB01# 3.1pF ±0.05pF GJM1555C1H1R4WB01# ±0.05pF GJM1555C1H3R1WB01# ±0.1pF GJM1555C1H3R1BB01# ±0.25pF GJM1555C1H3R1CB01# 3.2pF ±0.05pF GJM1555C1H3R2WB01# ±0.1pF GJM1555C1H1R4BB01# ±0.1pF GJM1555C1H3R2BB01# ±0.25pF GJM1555C1H1R4CB01# ±0.25pF GJM1555C1H3R2CB01# ±0.05pF GJM1555C1H1R5WB01# 3.3pF ±0.05pF GJM1555C1H1R6WB01# ±0.05pF GJM1555C1H3R3WB01# ±0.1pF GJM1555C1H3R3BB01# ±0.25pF GJM1555C1H1R5CB01# 1.7pF ±0.05pF GJM1555C1H2R9WB01# ±0.1pF GJM1555C1H1R1BB01# ±0.1pF GJM1555C1H1R5BB01# 1.6pF ±0.05pF GJM1555C1H2R8WB01# ±0.25pF GJM1555C1H1R0CB01# ±0.25pF GJM1555C1H1R3CB01# 1.5pF ±0.05pF GJM1555C1H2R7WB01# ±0.05pF GJM1555C1HR90WB01# ±0.1pF GJM1555C1H1R3BB01# 1.4pF ±0.05pF GJM1555C1H2R6WB01# ±0.1pF GJM1555C1H2R6BB01# ±0.05pF GJM1555C1HR80WB01# ±0.1pF GJM1555C1HR80BB01# 0.9pF ±0.05pF GJM1555C1H2R5WB01# ±0.05pF GJM1555C1HR60WB01# ±0.1pF GJM1555C1HR70BB01# 0.8pF ±0.05pF GJM1555C1H2R4WB01# ±0.1pF GJM1555C1H2R4BB01# ±0.05pF GJM1555C1HR50WB01# ±0.1pF GJM1555C1HR50BB01# ±0.05pF GJM1555C1H2R3WB01# ±0.25pF GJM1555C1H3R3CB01# 3.4pF ±0.05pF GJM1555C1H3R4WB01# ±0.1pF GJM1555C1H1R6BB01# ±0.1pF GJM1555C1H3R4BB01# ±0.25pF GJM1555C1H1R6CB01# ±0.25pF GJM1555C1H3R4CB01# ±0.05pF GJM1555C1H1R7WB01# 3.5pF ±0.05pF GJM1555C1H3R5WB01# ±0.1pF GJM1555C1H1R7BB01# ±0.1pF GJM1555C1H3R5BB01# ±0.25pF GJM1555C1H1R7CB01# ±0.25pF GJM1555C1H3R5CB01# ±0.05pF GJM1555C1H1R8WB01# 3.6pF ±0.05pF GJM1555C1H3R6WB01# ±0.1pF GJM1555C1H1R8BB01# ±0.1pF GJM1555C1H3R6BB01# ±0.25pF GJM1555C1H1R8CB01# ±0.25pF GJM1555C1H3R6CB01# ±0.05pF GJM1555C1H1R9WB01# 3.7pF ±0.05pF GJM1555C1H3R7WB01# ±0.1pF GJM1555C1H1R9BB01# ±0.1pF GJM1555C1H3R7BB01# ±0.25pF GJM1555C1H1R9CB01# ±0.25pF GJM1555C1H3R7CB01# ±0.05pF GJM1555C1H2R0WB01# 3.8pF ±0.05pF GJM1555C1H3R8WB01# ±0.1pF GJM1555C1H2R0BB01# ±0.1pF GJM1555C1H3R8BB01# ±0.25pF GJM1555C1H2R0CB01# ±0.25pF GJM1555C1H3R8CB01# ±0.05pF GJM1555C1H2R1WB01# 3.9pF ±0.05pF GJM1555C1H3R9WB01# Part number # indicates the package specification code. 96 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 1.0×0.5mm) 4.2pF 5.5pF ±0.5pF GJM1555C1H5R5DB01# 5.6pF ±0.05pF GJM1555C1H5R6WB01# ±0.1pF GJM1555C1H5R6BB01# ±0.1pF GJM1555C1H4R0BB01# ±0.25pF GJM1555C1H5R6CB01# ±0.25pF GJM1555C1H4R0CB01# ±0.5pF GJM1555C1H5R6DB01# ±0.05pF GJM1555C1H4R1WB01# 5.7pF ±0.1pF GJM1555C1H5R7BB01# ±0.25pF GJM1555C1H4R1CB01# ±0.25pF GJM1555C1H5R7CB01# ±0.05pF GJM1555C1H4R2WB01# ±0.5pF GJM1555C1H5R7DB01# 5.8pF ±0.25pF GJM1555C1H4R2CB01# ±0.1pF GJM1555C1H5R8BB01# ±0.25pF GJM1555C1H5R8CB01# ±0.5pF GJM1555C1H5R8DB01# 5.9pF ±0.1pF GJM1555C1H5R9BB01# ±0.1pF GJM1555C1H4R4BB01# ±0.25pF GJM1555C1H5R9CB01# ±0.05pF GJM1555C1H4R5WB01# ±0.5pF GJM1555C1H5R9DB01# 6.0pF ±0.1pF GJM1555C1H4R5BB01# ±0.1pF GJM1555C1H6R0BB01# ±0.25pF GJM1555C1H6R0CB01# ±0.05pF GJM1555C1H4R6WB01# ±0.5pF GJM1555C1H6R0DB01# 6.1pF ±0.1pF GJM1555C1H6R1BB01# ±0.05pF GJM1555C1H4R7WB01# ±0.25pF GJM1555C1H6R1CB01# ±0.1pF GJM1555C1H4R7BB01# ±0.5pF GJM1555C1H6R1DB01# 6.2pF 5.0pF ±0.1pF GJM1555C1H6R2BB01# ±0.1pF GJM1555C1H4R8BB01# ±0.25pF GJM1555C1H6R2CB01# ±0.05pF GJM1555C1H4R9WB01# ±0.25pF GJM1555C1H4R9CB01# ±0.25pF GJM1555C1H6R3CB01# ±0.05pF GJM1555C1H5R0WB01# ±0.5pF GJM1555C1H6R3DB01# 6.4pF ±0.25pF GJM1555C1H5R0CB01# ±0.1pF GJM1555C1H6R4BB01# ±0.25pF GJM1555C1H6R4CB01# ±0.1pF GJM1555C1H5R1BB01# ±0.5pF GJM1555C1H6R4DB01# 6.5pF ±0.1pF GJM1555C1H6R5BB01# ±0.05pF GJM1555C1H5R2WB01# ±0.25pF GJM1555C1H6R5CB01# ±0.5pF GJM1555C1H6R5DB01# 6.6pF ±0.05pF GJM1555C1H6R6WB01# ±0.5pF GJM1555C1H5R2DB01# ±0.1pF GJM1555C1H6R6BB01# ±0.05pF GJM1555C1H5R3WB01# ±0.25pF GJM1555C1H6R6CB01# ±0.1pF GJM1555C1H5R3BB01# ±0.25pF GJM1555C1H5R3CB01# ±0.5pF GJM1555C1H6R6DB01# 6.7pF ±0.05pF GJM1555C1H6R7WB01# ±0.5pF GJM1555C1H5R3DB01# ±0.1pF GJM1555C1H6R7BB01# ±0.05pF GJM1555C1H5R4WB01# ±0.25pF GJM1555C1H6R7CB01# ±0.1pF GJM1555C1H5R4BB01# ±0.25pF GJM1555C1H5R4CB01# 5.5pF ±0.05pF GJM1555C1H6R5WB01# ±0.5pF GJM1555C1H5R1DB01# ±0.1pF GJM1555C1H5R2BB01# 5.4pF ±0.05pF GJM1555C1H6R4WB01# ±0.05pF GJM1555C1H5R1WB01# ±0.25pF GJM1555C1H5R2CB01# 5.3pF ±0.05pF GJM1555C1H6R3WB01# ±0.1pF GJM1555C1H6R3BB01# ±0.25pF GJM1555C1H5R1CB01# 5.2pF ±0.5pF GJM1555C1H6R2DB01# 6.3pF ±0.1pF GJM1555C1H4R9BB01# ±0.1pF GJM1555C1H5R0BB01# 5.1pF ±0.05pF GJM1555C1H6R2WB01# ±0.05pF GJM1555C1H4R8WB01# ±0.25pF GJM1555C1H4R8CB01# 4.9pF ±0.05pF GJM1555C1H6R1WB01# ±0.25pF GJM1555C1H4R6CB01# ±0.25pF GJM1555C1H4R7CB01# 4.8pF ±0.05pF GJM1555C1H6R0WB01# ±0.25pF GJM1555C1H4R5CB01# ±0.1pF GJM1555C1H4R6BB01# 4.7pF ±0.05pF GJM1555C1H5R9WB01# ±0.05pF GJM1555C1H4R4WB01# ±0.25pF GJM1555C1H4R4CB01# 4.6pF ±0.05pF GJM1555C1H5R8WB01# ±0.05pF GJM1555C1H4R3WB01# ±0.1pF GJM1555C1H4R3BB01# 4.5pF ±0.05pF GJM1555C1H5R7WB01# ±0.1pF GJM1555C1H4R1BB01# ±0.25pF GJM1555C1H4R3CB01# 4.4pF Part Number ±0.05pF GJM1555C1H4R0WB01# ±0.1pF GJM1555C1H4R2BB01# 4.3pF C0G Tol. ±0.5pF GJM1555C1H6R7DB01# 6.8pF ±0.05pF GJM1555C1H6R8WB01# ±0.5pF GJM1555C1H5R4DB01# ±0.1pF GJM1555C1H6R8BB01# ±0.05pF GJM1555C1H5R5WB01# ±0.25pF GJM1555C1H6R8CB01# ±0.1pF GJM1555C1H5R5BB01# ±0.5pF GJM1555C1H6R8DB01# ±0.25pF GJM1555C1H5R5CB01# For General Purpose GRM Series 4.1pF 0.55mm 50Vdc Cap. Capacitor Array GNM Series 4.0pF Rated TC Voltage Code Low ESL LLp Series ±0.1pF GJM1555C1H3R9BB01# ±0.25pF GJM1555C1H3R9CB01# T max. High-Q Type GJM Series 3.9pF Part Number High Frequency GQM Series C0G Tol. Monolithic Microchip GMA Series 0.55mm 50Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. 6.9pF ±0.05pF GJM1555C1H6R9WB01# Part number # indicates the package specification code. 97 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 1.0×0.5mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.55mm 50Vdc C0G Cap. 6.9pF Tol. Part Number ±0.1pF GJM1555C1H6R9BB01# ±0.25pF GJM1555C1H6R9CB01# 7.0pF Rated TC Voltage Code 0.55mm 50Vdc C0G Cap. 8.2pF ±0.5pF GJM1555C1H8R2DB01# 8.3pF ±0.05pF GJM1555C1H8R3WB01# ±0.1pF GJM1555C1H8R3BB01# ±0.25pF GJM1555C1H8R3CB01# ±0.1pF GJM1555C1H7R0BB01# ±0.5pF GJM1555C1H8R3DB01# 8.4pF ±0.1pF GJM1555C1H8R4BB01# ±0.05pF GJM1555C1H7R1WB01# ±0.25pF GJM1555C1H8R4CB01# Capacitor Array GNM Series ±0.5pF GJM1555C1H8R4DB01# 8.5pF ±0.5pF GJM1555C1H7R1DB01# ±0.1pF GJM1555C1H8R5BB01# ±0.25pF GJM1555C1H8R5CB01# ±0.1pF GJM1555C1H7R2BB01# ±0.5pF GJM1555C1H8R5DB01# 8.6pF Low ESL LLp Series ±0.1pF GJM1555C1H8R6BB01# ±0.05pF GJM1555C1H7R3WB01# ±0.25pF GJM1555C1H8R6CB01# ±0.1pF GJM1555C1H7R3BB01# ±0.5pF GJM1555C1H8R6DB01# 8.7pF ±0.5pF GJM1555C1H7R3DB01# ±0.1pF GJM1555C1H8R7BB01# ±0.25pF GJM1555C1H8R7CB01# ±0.1pF GJM1555C1H7R4BB01# ±0.5pF GJM1555C1H8R7DB01# 8.8pF High-Q Type GJM Series ±0.1pF GJM1555C1H8R8BB01# ±0.05pF GJM1555C1H7R5WB01# ±0.25pF GJM1555C1H8R8CB01# ±0.1pF GJM1555C1H7R5BB01# ±0.5pF GJM1555C1H8R8DB01# 8.9pF ±0.5pF GJM1555C1H7R5DB01# ±0.1pF GJM1555C1H8R9BB01# ±0.25pF GJM1555C1H8R9CB01# High Frequency GQM Series ±0.1pF GJM1555C1H7R6BB01# ±0.5pF GJM1555C1H8R9DB01# 9.0pF ±0.1pF GJM1555C1H9R0BB01# ±0.05pF GJM1555C1H7R7WB01# ±0.25pF GJM1555C1H9R0CB01# ±0.25pF GJM1555C1H7R7CB01# ±0.5pF GJM1555C1H9R0DB01# 9.1pF Monolithic Microchip GMA Series ±0.5pF GJM1555C1H7R7DB01# ±0.1pF GJM1555C1H9R1BB01# ±0.25pF GJM1555C1H9R1CB01# ±0.1pF GJM1555C1H7R8BB01# ±0.5pF GJM1555C1H9R1DB01# 9.2pF ±0.1pF GJM1555C1H9R2BB01# ±0.05pF GJM1555C1H7R9WB01# ±0.25pF GJM1555C1H9R2CB01# ±0.1pF GJM1555C1H7R9BB01# ±0.5pF GJM1555C1H9R2DB01# 9.3pF ±0.05pF GJM1555C1H9R3WB01# For Bonding GMD Series ±0.5pF GJM1555C1H7R9DB01# ±0.1pF GJM1555C1H9R3BB01# ±0.05pF GJM1555C1H8R0WB01# ±0.25pF GJM1555C1H9R3CB01# ±0.1pF GJM1555C1H8R0BB01# ±0.25pF GJM1555C1H8R0CB01# ±0.5pF GJM1555C1H9R3DB01# 9.4pF ±0.05pF GJM1555C1H9R4WB01# ±0.5pF GJM1555C1H8R0DB01# ±0.1pF GJM1555C1H9R4BB01# ±0.05pF GJM1555C1H8R1WB01# ±0.25pF GJM1555C1H9R4CB01# Product Information ±0.1pF GJM1555C1H8R1BB01# ±0.25pF GJM1555C1H8R1CB01# 8.2pF ±0.05pF GJM1555C1H9R2WB01# ±0.5pF GJM1555C1H7R8DB01# ±0.25pF GJM1555C1H7R9CB01# 8.1pF ±0.05pF GJM1555C1H9R1WB01# ±0.05pF GJM1555C1H7R8WB01# ±0.25pF GJM1555C1H7R8CB01# 8.0pF ±0.05pF GJM1555C1H9R0WB01# ±0.5pF GJM1555C1H7R6DB01# ±0.1pF GJM1555C1H7R7BB01# 7.9pF ±0.05pF GJM1555C1H8R9WB01# ±0.05pF GJM1555C1H7R6WB01# ±0.25pF GJM1555C1H7R6CB01# 7.8pF ±0.05pF GJM1555C1H8R8WB01# ±0.5pF GJM1555C1H7R4DB01# ±0.25pF GJM1555C1H7R5CB01# 7.7pF ±0.05pF GJM1555C1H8R7WB01# ±0.05pF GJM1555C1H7R4WB01# ±0.25pF GJM1555C1H7R4CB01# 7.6pF ±0.05pF GJM1555C1H8R6WB01# ±0.5pF GJM1555C1H7R2DB01# ±0.25pF GJM1555C1H7R3CB01# 7.5pF ±0.05pF GJM1555C1H8R5WB01# ±0.05pF GJM1555C1H7R2WB01# ±0.25pF GJM1555C1H7R2CB01# 7.4pF ±0.05pF GJM1555C1H8R4WB01# ±0.5pF GJM1555C1H7R0DB01# ±0.1pF GJM1555C1H7R1BB01# 7.3pF Part Number ±0.5pF GJM1555C1H6R9DB01# ±0.25pF GJM1555C1H7R1CB01# 7.2pF Tol. ±0.05pF GJM1555C1H7R0WB01# ±0.25pF GJM1555C1H7R0CB01# 7.1pF T max. ±0.5pF GJM1555C1H9R4DB01# 9.5pF ±0.05pF GJM1555C1H9R5WB01# ±0.5pF GJM1555C1H8R1DB01# ±0.1pF GJM1555C1H9R5BB01# ±0.05pF GJM1555C1H8R2WB01# ±0.25pF GJM1555C1H9R5CB01# ±0.1pF GJM1555C1H8R2BB01# ±0.5pF GJM1555C1H9R5DB01# ±0.25pF GJM1555C1H8R2CB01# 9.6pF ±0.05pF GJM1555C1H9R6WB01# Part number # indicates the package specification code. 98 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 1.0×0.5mm) Tol. 43pF ±5% GJM1555C1H430JB01# 47pF ±1% GJM1555C1H470FB01# ±0.5pF GJM1555C1H9R6DB01# ±2% GJM1555C1H470GB01# ±0.05pF GJM1555C1H9R7WB01# ±5% GJM1555C1H470JB01# ±0.1pF GJM1555C1H9R6BB01# 0.55mm 50Vdc C0G ±0.25pF GJM1555C1H9R6CB01# 9.7pF ±0.1pF GJM1555C1H9R7BB01# CK 0.1pF ±0.05pF GJM1554C1HR10WB01# 0.2pF ±0.05pF GJM1554C1HR20WB01# 0.3pF ±0.05pF GJM1554C1HR30WB01# ±0.25pF GJM1555C1H9R7CB01# ±0.5pF GJM1555C1H9R7DB01# 9.8pF ±0.1pF GJM1554C1HR10BB01# ±0.05pF GJM1555C1H9R8WB01# ±0.1pF GJM1555C1H9R8BB01# ±0.1pF GJM1554C1HR20BB01# ±0.25pF GJM1555C1H9R8CB01# ±0.5pF GJM1555C1H9R8DB01# 9.9pF ±0.1pF GJM1554C1HR30BB01# 0.4pF ±0.05pF GJM1554C1HR40WB01# 0.5pF ±0.05pF GJM1554C1HR50WB01# 0.6pF ±0.05pF GJM1554C1HR60WB01# ±0.05pF GJM1555C1H9R9WB01# ±0.1pF GJM1555C1H9R9BB01# ±0.1pF GJM1554C1HR40BB01# ±0.25pF GJM1555C1H9R9CB01# ±0.5pF GJM1555C1H9R9DB01# Part Number ±0.1pF GJM1554C1HR50BB01# 10pF ±2% GJM1555C1H100GB01# ±5% GJM1555C1H100JB01# 11pF ±2% GJM1555C1H110GB01# ±5% GJM1555C1H110JB01# ±2% GJM1555C1H120GB01# ±5% GJM1555C1H120JB01# ±2% GJM1555C1H130GB01# ±5% GJM1555C1H130JB01# ±2% GJM1555C1H150GB01# ±0.1pF GJM1554C1H1R0BB01# ±5% GJM1555C1H150JB01# ±0.25pF GJM1554C1H1R0CB01# 16pF ±2% GJM1555C1H160GB01# ±5% GJM1555C1H160JB01# ±0.1pF GJM1554C1H1R1BB01# 18pF ±2% GJM1555C1H180GB01# ±0.25pF GJM1554C1H1R1CB01# ±5% GJM1555C1H180JB01# 20pF ±2% GJM1555C1H200GB01# ±0.1pF GJM1554C1H1R2BB01# ±5% GJM1555C1H200JB01# ±0.25pF GJM1554C1H1R2CB01# ±1% GJM1555C1H220FB01# ±2% GJM1555C1H220GB01# ±0.1pF GJM1554C1H1R3BB01# ±5% GJM1555C1H220JB01# ±0.25pF GJM1554C1H1R3CB01# ±1% GJM1555C1H240FB01# ±2% GJM1555C1H240GB01# ±0.1pF GJM1554C1H1R4BB01# ±5% GJM1555C1H240JB01# ±0.25pF GJM1554C1H1R4CB01# ±1% GJM1555C1H270FB01# ±2% GJM1555C1H270GB01# ±0.1pF GJM1554C1H1R5BB01# ±5% GJM1555C1H270JB01# ±0.25pF GJM1554C1H1R5CB01# ±1% GJM1555C1H300FB01# ±2% GJM1555C1H300GB01# 12pF 13pF 15pF 22pF 24pF 27pF 30pF 33pF 36pF 39pF 43pF For General Purpose GRM Series Cap. Capacitor Array GNM Series Rated TC Voltage Code Low ESL LLp Series T max. ±0.1pF GJM1554C1HR60BB01# 0.7pF ±0.05pF GJM1554C1HR70WB01# 0.8pF ±0.05pF GJM1554C1HR80WB01# 0.9pF ±0.05pF GJM1554C1HR90WB01# 1.0pF ±0.05pF GJM1554C1H1R0WB01# ±0.1pF GJM1554C1HR70BB01# ±0.1pF GJM1554C1HR80BB01# ±0.1pF GJM1554C1HR90BB01# 1.1pF 1.2pF 1.3pF 1.4pF 1.5pF 1.6pF High-Q Type GJM Series 9.6pF Part Number ±0.05pF GJM1554C1H1R1WB01# High Frequency GQM Series C0G Tol. ±0.05pF GJM1554C1H1R2WB01# ±0.05pF GJM1554C1H1R3WB01# ±0.05pF GJM1554C1H1R4WB01# Monolithic Microchip GMA Series 0.55mm 50Vdc Cap. ±0.05pF GJM1554C1H1R5WB01# ±0.05pF GJM1554C1H1R6WB01# ±0.1pF GJM1554C1H1R6BB01# ±5% GJM1555C1H300JB01# ±1% GJM1555C1H330FB01# ±0.25pF GJM1554C1H1R6CB01# ±2% GJM1555C1H330GB01# ±0.1pF GJM1554C1H1R7BB01# ±5% GJM1555C1H330JB01# ±0.25pF GJM1554C1H1R7CB01# ±1% GJM1555C1H360FB01# ±2% GJM1555C1H360GB01# ±0.1pF GJM1554C1H1R8BB01# ±5% GJM1555C1H360JB01# ±0.25pF GJM1554C1H1R8CB01# ±1% GJM1555C1H390FB01# ±2% GJM1555C1H390GB01# ±0.1pF GJM1554C1H1R9BB01# ±5% GJM1555C1H390JB01# ±0.25pF GJM1554C1H1R9CB01# ±1% GJM1555C1H430FB01# ±2% GJM1555C1H430GB01# 1.7pF 1.8pF 1.9pF 2.0pF For Bonding GMD Series Rated TC Voltage Code ±0.05pF GJM1554C1H1R7WB01# ±0.05pF GJM1554C1H1R8WB01# Product Information T max. ±0.05pF GJM1554C1H1R9WB01# ±0.05pF GJM1554C1H2R0WB01# ±0.1pF GJM1554C1H2R0BB01# Part number # indicates the package specification code. 99 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 1.0×0.5mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.55mm 50Vdc Cap. Tol. Part Number CK 2.0pF ±0.25pF GJM1554C1H2R0CB01# CJ 2.1pF ±0.05pF GJM1553C1H2R1WB01# 2.2pF 2.3pF Capacitor Array GNM Series 2.4pF 2.5pF Low ESL LLp Series 2.6pF 2.7pF T max. Rated TC Voltage Code 0.55mm 50Vdc CJ Cap. ±0.25pF GJM1553C1H3R8CB01# 3.9pF ±0.05pF GJM1553C1H3R9WB01# ±0.1pF GJM1553C1H2R1BB01# ±0.1pF GJM1553C1H3R9BB01# ±0.25pF GJM1553C1H2R1CB01# ±0.25pF GJM1553C1H3R9CB01# ±0.05pF GJM1553C1H2R2WB01# CH 4.0pF High-Q Type GJM Series High Frequency GQM Series 3.0pF 3.1pF Monolithic Microchip GMA Series 3.2pF 3.3pF 3.4pF ±0.1pF GJM1553C1H2R2BB01# ±0.1pF GJM1552C1H4R0BB01# ±0.25pF GJM1552C1H4R0CB01# ±0.05pF GJM1553C1H2R3WB01# 4.1pF ±0.1pF GJM1552C1H4R1BB01# ±0.25pF GJM1553C1H2R3CB01# ±0.25pF GJM1552C1H4R1CB01# ±0.05pF GJM1553C1H2R4WB01# 4.2pF ±0.1pF GJM1552C1H4R2BB01# ±0.25pF GJM1553C1H2R4CB01# ±0.25pF GJM1552C1H4R2CB01# ±0.05pF GJM1553C1H2R5WB01# 4.3pF ±0.1pF GJM1552C1H4R3BB01# ±0.25pF GJM1553C1H2R5CB01# ±0.25pF GJM1552C1H4R3CB01# ±0.05pF GJM1553C1H2R6WB01# 4.4pF ±0.05pF GJM1552C1H4R4WB01# ±0.1pF GJM1553C1H2R6BB01# ±0.1pF GJM1552C1H4R4BB01# ±0.25pF GJM1553C1H2R6CB01# ±0.25pF GJM1552C1H4R4CB01# ±0.05pF GJM1553C1H2R7WB01# 4.5pF ±0.05pF GJM1553C1H2R8WB01# ±0.05pF GJM1552C1H4R5WB01# ±0.1pF GJM1552C1H4R5BB01# ±0.25pF GJM1552C1H4R5CB01# 4.6pF ±0.05pF GJM1552C1H4R6WB01# ±0.1pF GJM1553C1H2R8BB01# ±0.1pF GJM1552C1H4R6BB01# ±0.25pF GJM1553C1H2R8CB01# ±0.25pF GJM1552C1H4R6CB01# ±0.05pF GJM1553C1H2R9WB01# 4.7pF ±0.05pF GJM1552C1H4R7WB01# ±0.1pF GJM1553C1H2R9BB01# ±0.1pF GJM1552C1H4R7BB01# ±0.25pF GJM1553C1H2R9CB01# ±0.25pF GJM1552C1H4R7CB01# ±0.05pF GJM1553C1H3R0WB01# 4.8pF ±0.05pF GJM1552C1H4R8WB01# ±0.1pF GJM1553C1H3R0BB01# ±0.1pF GJM1552C1H4R8BB01# ±0.25pF GJM1553C1H3R0CB01# ±0.25pF GJM1552C1H4R8CB01# ±0.05pF GJM1553C1H3R1WB01# 4.9pF ±0.05pF GJM1552C1H4R9WB01# ±0.1pF GJM1553C1H3R1BB01# ±0.1pF GJM1552C1H4R9BB01# ±0.25pF GJM1553C1H3R1CB01# ±0.25pF GJM1552C1H4R9CB01# ±0.05pF GJM1553C1H3R2WB01# 5.0pF ±0.05pF GJM1552C1H5R0WB01# ±0.1pF GJM1553C1H3R2BB01# ±0.1pF GJM1552C1H5R0BB01# ±0.25pF GJM1553C1H3R2CB01# ±0.25pF GJM1552C1H5R0CB01# ±0.05pF GJM1553C1H3R3WB01# 5.1pF ±0.05pF GJM1552C1H5R1WB01# ±0.1pF GJM1553C1H3R3BB01# ±0.1pF GJM1552C1H5R1BB01# ±0.25pF GJM1553C1H3R3CB01# ±0.25pF GJM1552C1H5R1CB01# ±0.05pF GJM1553C1H3R4WB01# ±0.5pF GJM1552C1H5R1DB01# 5.2pF ±0.05pF GJM1552C1H5R2WB01# For Bonding GMD Series ±0.25pF GJM1553C1H3R4CB01# ±0.1pF GJM1552C1H5R2BB01# ±0.05pF GJM1553C1H3R5WB01# ±0.25pF GJM1552C1H5R2CB01# ±0.5pF GJM1552C1H5R2DB01# 5.3pF ±0.05pF GJM1552C1H5R3WB01# ±0.05pF GJM1553C1H3R6WB01# ±0.1pF GJM1552C1H5R3BB01# ±0.1pF GJM1553C1H3R6BB01# ±0.25pF GJM1552C1H5R3CB01# Product Information ±0.25pF GJM1553C1H3R6CB01# 3.8pF ±0.05pF GJM1552C1H4R3WB01# ±0.1pF GJM1553C1H2R5BB01# ±0.1pF GJM1553C1H3R5BB01# 3.7pF ±0.05pF GJM1552C1H4R2WB01# ±0.1pF GJM1553C1H2R4BB01# ±0.25pF GJM1553C1H3R5CB01# 3.6pF ±0.05pF GJM1552C1H4R1WB01# ±0.1pF GJM1553C1H2R3BB01# ±0.1pF GJM1553C1H3R4BB01# 3.5pF ±0.05pF GJM1552C1H4R0WB01# ±0.25pF GJM1553C1H2R2CB01# ±0.25pF GJM1553C1H2R7CB01# 2.9pF Part Number 3.8pF ±0.1pF GJM1553C1H2R7BB01# 2.8pF Tol. ±0.05pF GJM1553C1H3R7WB01# ±0.5pF GJM1552C1H5R3DB01# 5.4pF ±0.05pF GJM1552C1H5R4WB01# ±0.1pF GJM1553C1H3R7BB01# ±0.1pF GJM1552C1H5R4BB01# ±0.25pF GJM1553C1H3R7CB01# ±0.25pF GJM1552C1H5R4CB01# ±0.05pF GJM1553C1H3R8WB01# ±0.5pF GJM1552C1H5R4DB01# ±0.1pF GJM1553C1H3R8BB01# 5.5pF ±0.05pF GJM1552C1H5R5WB01# Part number # indicates the package specification code. 100 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 1.0×0.5mm) 6.8pF ±0.5pF GJM1552C1H6R8DB01# 6.9pF ±0.05pF GJM1552C1H6R9WB01# ±0.5pF GJM1552C1H5R5DB01# ±0.1pF GJM1552C1H6R9BB01# ±0.25pF GJM1552C1H6R9CB01# ±0.1pF GJM1552C1H5R6BB01# ±0.5pF GJM1552C1H6R9DB01# 7.0pF ±0.1pF GJM1552C1H7R0BB01# ±0.05pF GJM1552C1H5R7WB01# ±0.25pF GJM1552C1H7R0CB01# ±0.1pF GJM1552C1H5R7BB01# ±0.5pF GJM1552C1H7R0DB01# 7.1pF ±0.5pF GJM1552C1H5R7DB01# ±0.1pF GJM1552C1H7R1BB01# ±0.25pF GJM1552C1H7R1CB01# ±0.1pF GJM1552C1H5R8BB01# ±0.5pF GJM1552C1H7R1DB01# 7.2pF ±0.1pF GJM1552C1H7R2BB01# ±0.05pF GJM1552C1H5R9WB01# ±0.25pF GJM1552C1H7R2CB01# ±0.1pF GJM1552C1H5R9BB01# ±0.5pF GJM1552C1H7R2DB01# 7.3pF ±0.5pF GJM1552C1H5R9DB01# ±0.1pF GJM1552C1H7R3BB01# ±0.25pF GJM1552C1H7R3CB01# ±0.1pF GJM1552C1H6R0BB01# ±0.5pF GJM1552C1H7R3DB01# 7.4pF ±0.1pF GJM1552C1H7R4BB01# ±0.05pF GJM1552C1H6R1WB01# ±0.25pF GJM1552C1H7R4CB01# ±0.1pF GJM1552C1H6R1BB01# ±0.5pF GJM1552C1H7R4DB01# 7.5pF ±0.5pF GJM1552C1H6R1DB01# ±0.1pF GJM1552C1H7R5BB01# ±0.25pF GJM1552C1H7R5CB01# ±0.1pF GJM1552C1H6R2BB01# ±0.5pF GJM1552C1H7R5DB01# 7.6pF ±0.1pF GJM1552C1H7R6BB01# ±0.05pF GJM1552C1H6R3WB01# ±0.25pF GJM1552C1H7R6CB01# ±0.25pF GJM1552C1H6R3CB01# ±0.5pF GJM1552C1H7R6DB01# 7.7pF ±0.5pF GJM1552C1H6R3DB01# ±0.1pF GJM1552C1H7R7BB01# ±0.25pF GJM1552C1H7R7CB01# ±0.1pF GJM1552C1H6R4BB01# ±0.5pF GJM1552C1H7R7DB01# 7.8pF ±0.1pF GJM1552C1H7R8BB01# ±0.05pF GJM1552C1H6R5WB01# ±0.25pF GJM1552C1H7R8CB01# ±0.1pF GJM1552C1H6R5BB01# ±0.5pF GJM1552C1H7R8DB01# 7.9pF ±0.5pF GJM1552C1H6R5DB01# ±0.1pF GJM1552C1H7R9BB01# ±0.25pF GJM1552C1H7R9CB01# ±0.1pF GJM1552C1H6R6BB01# ±0.5pF GJM1552C1H7R9DB01# 8.0pF ±0.05pF GJM1552C1H8R0WB01# ±0.5pF GJM1552C1H6R6DB01# ±0.1pF GJM1552C1H8R0BB01# ±0.05pF GJM1552C1H6R7WB01# ±0.25pF GJM1552C1H8R0CB01# ±0.1pF GJM1552C1H6R7BB01# ±0.25pF GJM1552C1H6R7CB01# 6.8pF ±0.05pF GJM1552C1H7R9WB01# ±0.05pF GJM1552C1H6R6WB01# ±0.25pF GJM1552C1H6R6CB01# 6.7pF ±0.05pF GJM1552C1H7R8WB01# ±0.5pF GJM1552C1H6R4DB01# ±0.25pF GJM1552C1H6R5CB01# 6.6pF ±0.05pF GJM1552C1H7R7WB01# ±0.05pF GJM1552C1H6R4WB01# ±0.25pF GJM1552C1H6R4CB01# 6.5pF ±0.05pF GJM1552C1H7R6WB01# ±0.5pF GJM1552C1H6R2DB01# ±0.1pF GJM1552C1H6R3BB01# 6.4pF ±0.05pF GJM1552C1H7R5WB01# ±0.05pF GJM1552C1H6R2WB01# ±0.25pF GJM1552C1H6R2CB01# 6.3pF ±0.05pF GJM1552C1H7R4WB01# ±0.5pF GJM1552C1H6R0DB01# ±0.25pF GJM1552C1H6R1CB01# 6.2pF ±0.05pF GJM1552C1H7R3WB01# ±0.05pF GJM1552C1H6R0WB01# ±0.25pF GJM1552C1H6R0CB01# 6.1pF ±0.05pF GJM1552C1H7R2WB01# ±0.5pF GJM1552C1H5R8DB01# ±0.25pF GJM1552C1H5R9CB01# 6.0pF ±0.05pF GJM1552C1H7R1WB01# ±0.05pF GJM1552C1H5R8WB01# ±0.25pF GJM1552C1H5R8CB01# 5.9pF ±0.05pF GJM1552C1H7R0WB01# ±0.5pF GJM1552C1H5R6DB01# ±0.25pF GJM1552C1H5R7CB01# 5.8pF Part Number ±0.5pF GJM1552C1H8R0DB01# 8.1pF ±0.05pF GJM1552C1H8R1WB01# ±0.5pF GJM1552C1H6R7DB01# ±0.1pF GJM1552C1H8R1BB01# ±0.05pF GJM1552C1H6R8WB01# ±0.25pF GJM1552C1H8R1CB01# ±0.1pF GJM1552C1H6R8BB01# ±0.5pF GJM1552C1H8R1DB01# ±0.25pF GJM1552C1H6R8CB01# For General Purpose GRM Series CH Tol. ±0.05pF GJM1552C1H5R6WB01# ±0.25pF GJM1552C1H5R6CB01# 5.7pF 0.55mm 50Vdc Cap. Capacitor Array GNM Series 5.6pF Rated TC Voltage Code Low ESL LLp Series ±0.1pF GJM1552C1H5R5BB01# ±0.25pF GJM1552C1H5R5CB01# T max. High-Q Type GJM Series 5.5pF Part Number High Frequency GQM Series CH Tol. Monolithic Microchip GMA Series 0.55mm 50Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. 8.2pF ±0.05pF GJM1552C1H8R2WB01# Part number # indicates the package specification code. 101 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 1.0×0.5mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.55mm 50Vdc CH Cap. 8.2pF Tol. Part Number ±0.1pF GJM1552C1H8R2BB01# ±0.25pF GJM1552C1H8R2CB01# 8.3pF Rated TC Voltage Code 0.55mm 50Vdc CH Cap. 9.5pF ±0.5pF GJM1552C1H9R5DB01# 9.6pF ±0.05pF GJM1552C1H9R6WB01# ±0.1pF GJM1552C1H9R6BB01# ±0.25pF GJM1552C1H9R6CB01# ±0.1pF GJM1552C1H8R3BB01# ±0.5pF GJM1552C1H9R6DB01# 9.7pF ±0.1pF GJM1552C1H9R7BB01# ±0.05pF GJM1552C1H8R4WB01# ±0.25pF GJM1552C1H9R7CB01# Capacitor Array GNM Series ±0.5pF GJM1552C1H9R7DB01# 9.8pF ±0.5pF GJM1552C1H8R4DB01# ±0.1pF GJM1552C1H9R8BB01# ±0.25pF GJM1552C1H9R8CB01# ±0.1pF GJM1552C1H8R5BB01# ±0.5pF GJM1552C1H9R8DB01# 9.9pF Low ESL LLp Series ±0.1pF GJM1552C1H9R9BB01# ±0.05pF GJM1552C1H8R6WB01# ±0.25pF GJM1552C1H9R9CB01# ±0.1pF GJM1552C1H8R6BB01# ±0.5pF GJM1552C1H9R9DB01# ±2% GJM1552C1H100GB01# ±5% GJM1552C1H100JB01# ±2% GJM1552C1H110GB01# ±5% GJM1552C1H110JB01# ±2% GJM1552C1H120GB01# ±5% GJM1552C1H120JB01# ±2% GJM1552C1H130GB01# ±5% GJM1552C1H130JB01# 15pF ±2% GJM1552C1H150GB01# ±5% GJM1552C1H150JB01# 16pF ±2% GJM1552C1H160GB01# ±5% GJM1552C1H160JB01# ±2% GJM1552C1H180GB01# ±5% GJM1552C1H180JB01# ±2% GJM1552C1H200GB01# ±5% GJM1552C1H200JB01# ±1% GJM1552C1H220FB01# ±0.5pF GJM1552C1H9R0DB01# ±2% GJM1552C1H220GB01# ±0.05pF GJM1552C1H9R1WB01# ±5% GJM1552C1H220JB01# ±1% GJM1552C1H240FB01# ±0.25pF GJM1552C1H9R1CB01# ±2% GJM1552C1H240GB01# ±0.5pF GJM1552C1H9R1DB01# ±5% GJM1552C1H240JB01# ±1% GJM1552C1H270FB01# ±0.1pF GJM1552C1H9R2BB01# ±2% GJM1552C1H270GB01# ±0.25pF GJM1552C1H9R2CB01# ±5% GJM1552C1H270JB01# 10pF ±0.5pF GJM1552C1H8R6DB01# ±0.05pF GJM1552C1H8R7WB01# 11pF ±0.1pF GJM1552C1H8R7BB01# ±0.25pF GJM1552C1H8R7CB01# 12pF High-Q Type GJM Series ±0.5pF GJM1552C1H8R7DB01# ±0.05pF GJM1552C1H8R8WB01# 13pF ±0.1pF GJM1552C1H8R8BB01# ±0.25pF GJM1552C1H8R8CB01# ±0.5pF GJM1552C1H8R8DB01# 8.9pF ±0.05pF GJM1552C1H8R9WB01# High Frequency GQM Series ±0.1pF GJM1552C1H8R9BB01# ±0.25pF GJM1552C1H8R9CB01# 18pF ±0.5pF GJM1552C1H8R9DB01# 9.0pF ±0.05pF GJM1552C1H9R0WB01# 20pF ±0.1pF GJM1552C1H9R0BB01# ±0.25pF GJM1552C1H9R0CB01# Monolithic Microchip GMA Series 9.1pF ±0.1pF GJM1552C1H9R1BB01# 9.2pF ±0.05pF GJM1552C1H9R2WB01# For Bonding GMD Series ±0.5pF GJM1552C1H9R2DB01# 9.3pF 22pF 24pF 27pF ±1% GJM1552C1H300FB01# ±0.05pF GJM1552C1H9R3WB01# ±2% GJM1552C1H300GB01# ±0.1pF GJM1552C1H9R3BB01# ±5% GJM1552C1H300JB01# ±1% GJM1552C1H330FB01# ±2% GJM1552C1H330GB01# ±5% GJM1552C1H330JB01# ±1% GJM1552C1H360FB01# ±0.25pF GJM1552C1H9R4CB01# ±2% GJM1552C1H360GB01# ±0.5pF GJM1552C1H9R4DB01# ±5% GJM1552C1H360JB01# ±1% GJM1552C1H390FB01# ±2% GJM1552C1H390GB01# ±5% GJM1552C1H390JB01# ±0.25pF GJM1552C1H9R3CB01# 30pF 33pF ±0.5pF GJM1552C1H9R3DB01# 9.4pF ±0.05pF GJM1552C1H9R4WB01# Product Information ±0.1pF GJM1552C1H9R4BB01# 9.5pF ±0.05pF GJM1552C1H9R9WB01# ±0.5pF GJM1552C1H8R5DB01# ±0.25pF GJM1552C1H8R6CB01# 8.8pF ±0.05pF GJM1552C1H9R8WB01# ±0.05pF GJM1552C1H8R5WB01# ±0.25pF GJM1552C1H8R5CB01# 8.7pF ±0.05pF GJM1552C1H9R7WB01# ±0.5pF GJM1552C1H8R3DB01# ±0.1pF GJM1552C1H8R4BB01# 8.6pF Part Number ±0.5pF GJM1552C1H8R2DB01# ±0.25pF GJM1552C1H8R4CB01# 8.5pF Tol. ±0.05pF GJM1552C1H8R3WB01# ±0.25pF GJM1552C1H8R3CB01# 8.4pF T max. ±0.05pF GJM1552C1H9R5WB01# ±0.1pF GJM1552C1H9R5BB01# ±0.25pF GJM1552C1H9R5CB01# 36pF 39pF Part number # indicates the package specification code. 102 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GJM Series Temperature Compensating Type HiQ C02E.pdf Oct.1,2012 Part Number List (→ c 1.0×0.5mm) GJM1552C1H430JB01# ±1% GJM1552C1H470FB01# ±2% GJM1552C1H470GB01# ±5% GJM1552C1H470JB01# For General Purpose GRM Series GJM1552C1H430GB01# ±5% Capacitor Array GNM Series GJM1552C1H430FB01# ±2% Low ESL LLp Series ±1% High-Q Type GJM Series 43pF 47pF Part Number High Frequency GQM Series CH Tol. Monolithic Microchip GMA Series 0.55mm 50Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. Part number # indicates the package specification code. 103 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors High Frequency GQM Series For General Purpose GRM Series Capacitor for high frequency suitable for PA designs. e g e T Capacitor Array GNM Series W L 1 HiQ and low ESR in UHF and microwave frequency bands. 2 Highly conductive copper was adopted for the internal electrodes. 3 Product compatible to tight tolerances. Low ESL LLp Series 4 Achieved high withstand voltages. 5 Ideal for improving the characteristics and reducing power consumption in RF equipment. High-Q Type GJM Series High Frequency GQM Series Monolithic Microchip GMA Series For Bonding GMD Series Product Information 104 HiQ C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. T max. c 1.6×0.8mm Rated TC Voltage Code Cap. 0.8mm 250Vdc C0G 0.1pF ±0.1pF GQM1875C2ER10BB12# 0.2pF ±0.1pF GQM1875C2ER20BB12# 0.3pF ±0.1pF GQM1875C2ER30BB12# Tol. Part Number Part Number List Rated TC Voltage Code Cap. 0.8mm 250Vdc C0G 6.0pF ±0.25pF GQM1875C2E6R0CB12# 6.2pF ±0.25pF GQM1875C2E6R2CB12# 6.8pF ±0.25pF GQM1875C2E6R8CB12# 7.0pF ±0.25pF GQM1875C2E7R0CB12# 7.5pF ±0.25pF GQM1875C2E7R5CB12# Tol. Part Number ±0.5pF GQM1875C2E6R0DB12# ±0.5pF GQM1875C2E6R2DB12# ±0.25pF GQM1875C2ER30CB12# ±0.5pF GQM1875C2E6R8DB12# ±0.1pF GQM1875C2ER40BB12# ±0.25pF GQM1875C2ER40CB12# ±0.25pF GQM1875C2ER50CB12# ±0.5pF GQM1875C2E7R5DB12# ±0.1pF GQM1875C2ER75BB12# 8.0pF ±0.25pF GQM1875C2E8R0CB12# 8.2pF ±0.25pF GQM1875C2E8R2CB12# 9.0pF ±0.25pF GQM1875C2E9R0CB12# ±0.25pF GQM1875C2ER75CB12# ±0.5pF GQM1875C2E8R0DB12# ±0.1pF GQM1875C2E1R0BB12# ±0.25pF GQM1875C2E1R0CB12# ±0.5pF GQM1875C2E8R2DB12# ±0.1pF GQM1875C2E1R1BB12# ±0.25pF GQM1875C2E1R1CB12# 1.2pF ±0.5pF GQM1875C2E9R0DB12# ±0.1pF GQM1875C2E1R2BB12# 9.1pF ±0.25pF GQM1875C2E1R2CB12# 1.3pF ±2% GQM1875C2E100GB12# ±5% GQM1875C2E100JB12# 11pF ±2% GQM1875C2E110GB12# ±5% GQM1875C2E110JB12# 12pF ±2% GQM1875C2E120GB12# ±5% GQM1875C2E120JB12# ±2% GQM1875C2E130GB12# ±5% GQM1875C2E130JB12# ±2% GQM1875C2E150GB12# ±5% GQM1875C2E150JB12# ±2% GQM1875C2E160GB12# ±5% GQM1875C2E160JB12# 18pF ±2% GQM1875C2E180GB12# ±5% GQM1875C2E180JB12# 20pF ±2% GQM1875C2E200GB12# ±5% GQM1875C2E200JB12# ±2% GQM1875C2E220GB12# ±5% GQM1875C2E220JB12# 24pF ±2% GQM1875C2E240GB12# ±5% GQM1875C2E240JB12# 27pF ±2% GQM1875C2E270GB12# ±5% GQM1875C2E270JB12# ±2% GQM1875C2E300GB12# ±5% GQM1875C2E300JB12# ±2% GQM1875C2E330GB12# ±5% GQM1875C2E330JB12# ±2% GQM1875C2E360GB12# ±5% GQM1875C2E360JB12# ±2% GQM1875C2E390GB12# ±5% GQM1875C2E390JB12# ±2% GQM1875C2E430GB12# ±5% GQM1875C2E430JB12# ±2% GQM1875C2E470GB12# ±5% GQM1875C2E470JB12# 10pF ±0.1pF GQM1875C2E1R5BB12# ±0.25pF GQM1875C2E1R5CB12# 1.6pF ±0.1pF GQM1875C2E1R6BB12# ±0.25pF GQM1875C2E1R6CB12# 1.8pF ±0.1pF GQM1875C2E1R8BB12# 13pF ±0.25pF GQM1875C2E1R8CB12# 2.0pF ±0.1pF GQM1875C2E2R0BB12# 15pF ±0.25pF GQM1875C2E2R0CB12# 2.2pF ±0.1pF GQM1875C2E2R2BB12# 16pF ±0.25pF GQM1875C2E2R2CB12# 2.4pF ±0.1pF GQM1875C2E2R4BB12# ±0.25pF GQM1875C2E2R4CB12# 2.7pF ±0.1pF GQM1875C2E2R7BB12# ±0.25pF GQM1875C2E2R7CB12# 3.0pF ±0.1pF GQM1875C2E3R0BB12# 22pF ±0.25pF GQM1875C2E3R0CB12# 3.3pF ±0.1pF GQM1875C2E3R3BB12# ±0.25pF GQM1875C2E3R3CB12# 3.6pF ±0.1pF GQM1875C2E3R6BB12# ±0.25pF GQM1875C2E3R6CB12# 3.9pF ±0.1pF GQM1875C2E3R9BB12# 30pF ±0.25pF GQM1875C2E3R9CB12# 4.0pF ±0.1pF GQM1875C2E4R0BB12# 33pF ±0.25pF GQM1875C2E4R0CB12# 4.3pF ±0.1pF GQM1875C2E4R3BB12# 36pF ±0.25pF GQM1875C2E4R3CB12# 4.7pF ±0.1pF GQM1875C2E4R7BB12# 39pF ±0.25pF GQM1875C2E4R7CB12# 5.0pF ±0.1pF GQM1875C2E5R0BB12# 43pF ±0.25pF GQM1875C2E5R0CB12# 5.1pF ±0.25pF GQM1875C2E5R1CB12# 47pF ±0.5pF GQM1875C2E5R1DB12# 5.6pF ±0.25pF GQM1875C2E5R6CB12# ±0.5pF GQM1875C2E5R6DB12# ±0.25pF GQM1875C2E9R1CB12# ±0.5pF GQM1875C2E9R1DB12# ±0.1pF GQM1875C2E1R3BB12# ±0.25pF GQM1875C2E1R3CB12# 1.5pF Low ESL LLp Series 1.1pF 0.9mm 100Vdc C0G 0.5pF High-Q Type GJM Series 1.0pF High Frequency GQM Series 0.75pF Capacitor Array GNM Series ±0.5pF GQM1875C2E7R0DB12# ±0.1pF GQM1875C2ER50BB12# Monolithic Microchip GMA Series 0.5pF For Bonding GMD Series 0.4pF Product Information T max. HiQ For General Purpose GRM Series GQM Series Temperature Compensating Type Oct.1,2012 ±0.1pF GQM1885C2AR50BB01# ±0.25pF GQM1885C2AR50CB01# Part number # indicates the package specification code. 105 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GQM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 1.6×0.8mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.9mm 100Vdc C0G Cap. 0.75pF Tol. Part Number ±0.1pF GQM1885C2AR75BB01# T max. Rated TC Voltage Code 0.9mm 100Vdc CK Cap. 1.0pF ±0.25pF GQM1885C2AR75CB01# 1.0pF ±0.1pF GQM1885C2A1R0BB01# 1.1pF ±0.1pF GQM1885C2A1R1BB01# 1.2pF 1.3pF Capacitor Array GNM Series ±0.1pF GQM1885C2A1R3BB01# 1.5pF ±0.1pF GQM1885C2A1R5BB01# 1.6pF ±0.1pF GQM1885C2A1R6BB01# 1.8pF ±0.1pF GQM1885C2A1R8BB01# 2.0pF Low ESL LLp Series ±0.1pF GQM1885C2A2R0BB01# CJ 2.2pF ±0.1pF GQM1885C2A2R2BB01# 2.4pF ±0.1pF GQM1885C2A2R4BB01# 2.7pF High-Q Type GJM Series 3.0pF ±0.1pF GQM1885C2A3R0BB01# 3.3pF ±0.1pF GQM1885C2A3R3BB01# 3.6pF High Frequency GQM Series ±0.1pF GQM1885C2A3R6BB01# 3.9pF ±0.1pF GQM1885C2A3R9BB01# CH 4.0pF 4.3pF Monolithic Microchip GMA Series ±0.1pF GQM1885C2A4R3BB01# 4.7pF 5.1pF ±0.25pF GQM1885C2A5R1CB01# ±0.1pF GQM1882C2A5R0BB01# 5.1pF ±0.25pF GQM1882C2A5R1CB01# 5.6pF ±0.25pF GQM1882C2A5R6CB01# ±0.25pF GQM1882C2A5R0CB01# ±0.25pF GQM1885C2A5R0CB01# ±0.5pF GQM1882C2A5R1DB01# ±0.5pF GQM1885C2A5R1DB01# For Bonding GMD Series 5.6pF ±0.5pF GQM1882C2A5R6DB01# ±0.25pF GQM1885C2A5R6CB01# 6.0pF ±0.25pF GQM1882C2A6R0CB01# 6.2pF ±0.25pF GQM1882C2A6R2CB01# 6.8pF ±0.25pF GQM1882C2A6R8CB01# 7.0pF ±0.25pF GQM1885C1H7R0CB01# 7.5pF ±0.25pF GQM1885C1H7R5CB01# 8.0pF ±0.25pF GQM1885C1H8R0CB01# ±0.5pF GQM1885C2A5R6DB01# 6.0pF ±0.25pF GQM1885C2A6R0CB01# 6.2pF ±0.25pF GQM1885C2A6R2CB01# 6.8pF ±0.25pF GQM1885C2A6R8CB01# 0.5pF ±0.1pF GQM1884C2AR50BB01# ±0.5pF GQM1882C2A6R0DB01# ±0.5pF GQM1885C2A6R0DB01# ±0.5pF GQM1882C2A6R2DB01# ±0.5pF GQM1885C2A6R2DB01# ±0.5pF GQM1882C2A6R8DB01# Product Information 50Vdc C0G ±0.5pF GQM1885C2A6R8DB01# CK ±0.5pF GQM1885C1H7R0DB01# ±0.25pF GQM1884C2AR50CB01# 0.75pF ±0.1pF GQM1884C2AR75BB01# ±0.25pF GQM1884C2AR75CB01# ±0.1pF GQM1882C2A4R7BB01# 5.0pF ±0.25pF GQM1885C2A4R7CB01# ±0.1pF GQM1885C2A5R0BB01# ±0.1pF GQM1882C2A4R3BB01# ±0.25pF GQM1882C2A4R7CB01# ±0.1pF GQM1885C2A4R7BB01# 5.0pF ±0.1pF GQM1882C2A4R0BB01# ±0.25pF GQM1882C2A4R3CB01# ±0.25pF GQM1885C2A4R3CB01# 4.7pF ±0.1pF GQM1883C2A3R9BB01# ±0.25pF GQM1882C2A4R0CB01# ±0.1pF GQM1885C2A4R0BB01# ±0.25pF GQM1885C2A4R0CB01# 4.3pF ±0.1pF GQM1883C2A3R6BB01# ±0.25pF GQM1883C2A3R9CB01# ±0.25pF GQM1885C2A3R9CB01# 4.0pF ±0.1pF GQM1883C2A3R3BB01# ±0.25pF GQM1883C2A3R6CB01# ±0.25pF GQM1885C2A3R6CB01# 3.9pF ±0.1pF GQM1883C2A3R0BB01# ±0.25pF GQM1883C2A3R3CB01# ±0.25pF GQM1885C2A3R3CB01# 3.6pF ±0.1pF GQM1883C2A2R7BB01# ±0.25pF GQM1883C2A3R0CB01# ±0.25pF GQM1885C2A3R0CB01# 3.3pF ±0.1pF GQM1883C2A2R4BB01# ±0.25pF GQM1883C2A2R7CB01# ±0.1pF GQM1885C2A2R7BB01# ±0.25pF GQM1885C2A2R7CB01# 3.0pF ±0.1pF GQM1883C2A2R2BB01# ±0.25pF GQM1883C2A2R4CB01# ±0.25pF GQM1885C2A2R4CB01# 2.7pF ±0.1pF GQM1884C2A2R0BB01# ±0.25pF GQM1883C2A2R2CB01# ±0.25pF GQM1885C2A2R2CB01# 2.4pF ±0.1pF GQM1884C2A1R8BB01# ±0.25pF GQM1884C2A2R0CB01# ±0.25pF GQM1885C2A2R0CB01# 2.2pF ±0.1pF GQM1884C2A1R6BB01# ±0.25pF GQM1884C2A1R8CB01# ±0.25pF GQM1885C2A1R8CB01# 2.0pF ±0.1pF GQM1884C2A1R5BB01# ±0.25pF GQM1884C2A1R6CB01# ±0.25pF GQM1885C2A1R6CB01# 1.8pF ±0.1pF GQM1884C2A1R3BB01# ±0.25pF GQM1884C2A1R5CB01# ±0.25pF GQM1885C2A1R5CB01# 1.6pF ±0.1pF GQM1884C2A1R2BB01# ±0.25pF GQM1884C2A1R3CB01# ±0.25pF GQM1885C2A1R3CB01# 1.5pF ±0.1pF GQM1884C2A1R1BB01# ±0.25pF GQM1884C2A1R2CB01# ±0.1pF GQM1885C2A1R2BB01# ±0.25pF GQM1885C2A1R2CB01# 1.3pF ±0.1pF GQM1884C2A1R0BB01# ±0.25pF GQM1884C2A1R1CB01# ±0.25pF GQM1885C2A1R1CB01# 1.2pF Part Number ±0.25pF GQM1884C2A1R0CB01# ±0.25pF GQM1885C2A1R0CB01# 1.1pF Tol. ±0.5pF GQM1885C1H7R5DB01# ±0.5pF GQM1885C1H8R0DB01# Part number # indicates the package specification code. 106 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GQM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 1.6×0.8mm) C0G Tol. 100pF ±2% GQM1885C1H101GB01# ±5% GQM1885C1H101JB01# ±0.5pF GQM1885C1H8R2DB01# 9.0pF ±0.25pF GQM1885C1H9R0CB01# 9.1pF ±0.25pF GQM1885C1H9R1CB01# CH 7.0pF ±0.25pF GQM1882C1H7R0CB01# 7.5pF ±0.25pF GQM1882C1H7R5CB01# 8.0pF ±0.25pF GQM1882C1H8R0CB01# 8.2pF ±0.25pF GQM1882C1H8R2CB01# ±0.5pF GQM1885C1H9R0DB01# ±0.5pF GQM1882C1H7R0DB01# ±0.5pF GQM1885C1H9R1DB01# 10pF ±2% GQM1885C1H100GB01# ±5% GQM1885C1H100JB01# 11pF ±2% GQM1885C1H110GB01# ±5% GQM1885C1H110JB01# ±2% GQM1885C1H120GB01# ±5% GQM1885C1H120JB01# 13pF ±2% GQM1885C1H130GB01# ±5% GQM1885C1H130JB01# 15pF ±2% GQM1885C1H150GB01# ±5% GQM1885C1H150JB01# ±2% GQM1885C1H160GB01# ±5% GQM1885C1H160JB01# ±2% GQM1885C1H180GB01# ±5% GQM1885C1H180JB01# 20pF ±2% GQM1885C1H200GB01# ±5% GQM1885C1H200JB01# 22pF ±2% GQM1885C1H220GB01# ±5% GQM1885C1H220JB01# ±2% GQM1885C1H240GB01# ±5% GQM1885C1H240JB01# ±2% GQM1885C1H270GB01# ±5% GQM1885C1H270JB01# ±2% GQM1885C1H300GB01# ±5% GQM1885C1H300JB01# 33pF ±2% GQM1885C1H330GB01# ±5% GQM1885C1H330JB01# 36pF ±2% GQM1885C1H360GB01# ±5% GQM1885C1H360JB01# ±2% GQM1885C1H390GB01# ±5% GQM1885C1H390JB01# 43pF ±2% GQM1885C1H430GB01# ±5% GQM1885C1H430JB01# 47pF ±2% GQM1885C1H470GB01# ±5% GQM1885C1H470JB01# ±2% GQM1885C1H510GB01# ±5% GQM1885C1H510JB01# ±2% GQM1885C1H560GB01# ±5% GQM1885C1H560JB01# ±2% GQM1885C1H620GB01# ±5% GQM1885C1H620JB01# ±2% GQM1885C1H680GB01# ±5% GQM1885C1H680JB01# ±2% GQM1885C1H750GB01# ±5% GQM1885C1H750JB01# ±2% GQM1885C1H820GB01# ±5% GQM1885C1H820JB01# ±2% GQM1885C1H910GB01# ±5% GQM1885C1H910JB01# 12pF 16pF 18pF 24pF 27pF 30pF 39pF 51pF 56pF 62pF 68pF 75pF 82pF 91pF Part Number For General Purpose GRM Series 50Vdc Cap. ±0.5pF GQM1882C1H7R5DB01# ±0.5pF GQM1882C1H8R0DB01# Capacitor Array GNM Series 0.9mm Rated TC Voltage Code ±0.5pF GQM1882C1H8R2DB01# 9.0pF ±0.25pF GQM1882C1H9R0CB01# 9.1pF ±0.25pF GQM1882C1H9R1CB01# ±0.5pF GQM1882C1H9R0DB01# ±0.5pF GQM1882C1H9R1DB01# ±2% GQM1882C1H100GB01# ±5% GQM1882C1H100JB01# ±2% GQM1882C1H110GB01# ±5% GQM1882C1H110JB01# ±2% GQM1882C1H120GB01# ±5% GQM1882C1H120JB01# 13pF ±2% GQM1882C1H130GB01# ±5% GQM1882C1H130JB01# 15pF ±2% GQM1882C1H150GB01# ±5% GQM1882C1H150JB01# ±2% GQM1882C1H160GB01# ±5% GQM1882C1H160JB01# ±2% GQM1882C1H180GB01# ±5% GQM1882C1H180JB01# ±2% GQM1882C1H200GB01# ±5% GQM1882C1H200JB01# 22pF ±2% GQM1882C1H220GB01# ±5% GQM1882C1H220JB01# 24pF ±2% GQM1882C1H240GB01# ±5% GQM1882C1H240JB01# ±2% GQM1882C1H270GB01# ±5% GQM1882C1H270JB01# 30pF ±2% GQM1882C1H300GB01# ±5% GQM1882C1H300JB01# 33pF ±2% GQM1882C1H330GB01# ±5% GQM1882C1H330JB01# ±2% GQM1882C1H360GB01# ±5% GQM1882C1H360JB01# ±2% GQM1882C1H390GB01# ±5% GQM1882C1H390JB01# ±2% GQM1882C1H430GB01# ±5% GQM1882C1H430JB01# ±2% GQM1882C1H470GB01# ±5% GQM1882C1H470JB01# ±2% GQM1882C1H510GB01# ±5% GQM1882C1H510JB01# ±2% GQM1882C1H560GB01# ±5% GQM1882C1H560JB01# ±2% GQM1882C1H620GB01# ±5% GQM1882C1H620JB01# 10pF 11pF 12pF 16pF 18pF 20pF 27pF 36pF 39pF 43pF 47pF 51pF 56pF 62pF Low ESL LLp Series ±0.25pF GQM1885C1H8R2CB01# T max. High-Q Type GJM Series 8.2pF Part Number High Frequency GQM Series C0G Tol. Monolithic Microchip GMA Series 50Vdc Cap. For Bonding GMD Series 0.9mm Rated TC Voltage Code Product Information T max. Part number # indicates the package specification code. 107 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GQM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 1.6×0.8mm) T max. For General Purpose GRM Series 0.9mm Rated TC Voltage Code 50Vdc CH Capacitor Array GNM Series Cap. Tol. 68pF ±2% GQM1882C1H680GB01# ±5% GQM1882C1H680JB01# 75pF ±2% GQM1882C1H750GB01# ±5% GQM1882C1H750JB01# 82pF ±2% GQM1882C1H820GB01# ±5% GQM1882C1H820JB01# 91pF ±2% GQM1882C1H910GB01# ±5% GQM1882C1H910JB01# ±2% GQM1882C1H101GB01# ±5% GQM1882C1H101JB01# 100pF Part Number T max. Rated TC Voltage Code Cap. 0.95mm 100Vdc C0G 4.7pF 5.0pF Tol. Part Number ±0.25pF GQM2195C2A4R7CB01# ±0.1pF GQM2195C2A5R0BB01# ±0.25pF GQM2195C2A5R0CB01# 5.1pF ±0.25pF GQM2195C2A5R1CB01# ±0.5pF GQM2195C2A5R1DB01# 5.6pF ±0.25pF GQM2195C2A5R6CB01# 6.0pF ±0.25pF GQM2195C2A6R0CB01# 6.2pF ±0.25pF GQM2195C2A6R2CB01# 6.8pF ±0.25pF GQM2195C2A6R8CB01# 7.0pF ±0.25pF GQM2195C2A7R0CB01# ±0.5pF GQM2195C2A5R6DB01# ±0.5pF GQM2195C2A6R0DB01# ±0.5pF GQM2195C2A6R2DB01# c 2.0×1.25mm T max. ±0.5pF GQM2195C2A6R8DB01# Low ESL LLp Series Rated TC Voltage Code Cap. 0.95mm 100Vdc C0G 0.5pF Tol. Part Number ±0.5pF GQM2195C2A7R0DB01# ±0.1pF GQM2195C2AR50BB01# 7.5pF ±0.25pF GQM2195C2A7R5CB01# 8.0pF ±0.25pF GQM2195C2A8R0CB01# 8.2pF ±0.25pF GQM2195C2A8R2CB01# ±0.25pF GQM2195C2AR50CB01# 0.75pF ±0.5pF GQM2195C2A7R5DB01# ±0.1pF GQM2195C2AR75BB01# ±0.25pF GQM2195C2AR75CB01# 1.0pF ±0.5pF GQM2195C2A8R0DB01# ±0.1pF GQM2195C2A1R0BB01# ±0.25pF GQM2195C2A1R0CB01# 1.1pF ±0.5pF GQM2195C2A8R2DB01# ±0.1pF GQM2195C2A1R1BB01# High-Q Type GJM Series 9.0pF ±0.25pF GQM2195C2A9R0CB01# 9.1pF ±0.25pF GQM2195C2A9R1CB01# ±0.25pF GQM2195C2A1R1CB01# 1.2pF ±0.5pF GQM2195C2A9R0DB01# ±0.1pF GQM2195C2A1R2BB01# ±0.25pF GQM2195C2A1R2CB01# 1.3pF ±0.5pF GQM2195C2A9R1DB01# ±0.1pF GQM2195C2A1R3BB01# 10pF ±2% GQM2195C2A100GB01# ±5% GQM2195C2A100JB01# 11pF ±2% GQM2195C2A110GB01# ±5% GQM2195C2A110JB01# ±2% GQM2195C2A120GB01# ±5% GQM2195C2A120JB01# ±2% GQM2195C2A130GB01# ±5% GQM2195C2A130JB01# ±2% GQM2195C2A150GB01# ±5% GQM2195C2A150JB01# ±2% GQM2195C2A160GB01# ±5% GQM2195C2A160JB01# ±2% GQM2195C2A180GB01# ±5% GQM2195C2A180JB01# ±0.25pF GQM2195C2A1R3CB01# 1.5pF ±0.1pF GQM2195C2A1R5BB01# High Frequency GQM Series ±0.25pF GQM2195C2A1R5CB01# 1.6pF ±0.1pF GQM2195C2A1R6BB01# 12pF ±0.25pF GQM2195C2A1R6CB01# 1.8pF ±0.1pF GQM2195C2A1R8BB01# 13pF ±0.25pF GQM2195C2A1R8CB01# 2.0pF ±0.1pF GQM2195C2A2R0BB01# 15pF Monolithic Microchip GMA Series ±0.25pF GQM2195C2A2R0CB01# 2.2pF ±0.1pF GQM2195C2A2R2BB01# 16pF ±0.25pF GQM2195C2A2R2CB01# 2.4pF ±0.1pF GQM2195C2A2R4BB01# 18pF ±0.25pF GQM2195C2A2R4CB01# 2.7pF ±0.1pF GQM2195C2A2R7BB01# CK 0.5pF ±0.25pF GQM2195C2A2R7CB01# 3.0pF ±0.1pF GQM2195C2A3R0BB01# ±0.25pF GQM2194C2AR50CB01# 0.75pF For Bonding GMD Series ±0.25pF GQM2195C2A3R0CB01# 3.3pF ±0.1pF GQM2195C2A3R3BB01# ±0.1pF GQM2195C2A3R6BB01# ±0.1pF GQM2195C2A3R9BB01# 1.1pF Product Information ±0.1pF GQM2195C2A4R0BB01# 1.2pF ±0.1pF GQM2195C2A4R3BB01# 1.3pF ±0.1pF GQM2195C2A4R7BB01# ±0.1pF GQM2194C2A1R3BB01# ±0.25pF GQM2194C2A1R3CB01# 1.5pF ±0.1pF GQM2194C2A1R5BB01# ±0.25pF GQM2194C2A1R5CB01# ±0.25pF GQM2195C2A4R3CB01# 4.7pF ±0.1pF GQM2194C2A1R2BB01# ±0.25pF GQM2194C2A1R2CB01# ±0.25pF GQM2195C2A4R0CB01# 4.3pF ±0.1pF GQM2194C2A1R1BB01# ±0.25pF GQM2194C2A1R1CB01# ±0.25pF GQM2195C2A3R9CB01# 4.0pF ±0.1pF GQM2194C2A1R0BB01# ±0.25pF GQM2194C2A1R0CB01# ±0.25pF GQM2195C2A3R6CB01# 3.9pF ±0.1pF GQM2194C2AR75BB01# ±0.25pF GQM2194C2AR75CB01# 1.0pF ±0.25pF GQM2195C2A3R3CB01# 3.6pF ±0.1pF GQM2194C2AR50BB01# 1.6pF ±0.1pF GQM2194C2A1R6BB01# Part number # indicates the package specification code. 108 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GQM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 2.0×1.25mm) 0.95mm 100Vdc CH Tol. 12pF ±5% GQM2192C2A120JB01# 13pF ±2% GQM2192C2A130GB01# ±5% GQM2192C2A130JB01# ±2% GQM2192C2A150GB01# ±5% GQM2192C2A150JB01# ±2% GQM2192C2A160GB01# ±5% GQM2192C2A160JB01# ±2% GQM2192C2A180GB01# ±5% GQM2192C2A180JB01# 20pF ±2% GQM2195C1H200GB01# ±5% GQM2195C1H200JB01# 22pF ±2% GQM2195C1H220GB01# ±5% GQM2195C1H220JB01# ±2% GQM2195C1H240GB01# ±5% GQM2195C1H240JB01# 27pF ±2% GQM2195C1H270GB01# ±5% GQM2195C1H270JB01# 30pF ±2% GQM2195C1H300GB01# ±5% GQM2195C1H300JB01# ±2% GQM2195C1H330GB01# ±5% GQM2195C1H330JB01# ±2% GQM2195C1H360GB01# ±5% GQM2195C1H360JB01# ±2% GQM2195C1H390GB01# ±5% GQM2195C1H390JB01# 43pF ±2% GQM2195C1H430GB01# ±5% GQM2195C1H430JB01# 47pF ±2% GQM2195C1H470GB01# ±5% GQM2195C1H470JB01# ±2% GQM2195C1H510GB01# ±5% GQM2195C1H510JB01# ±2% GQM2195C1H560GB01# ±5% GQM2195C1H560JB01# ±2% GQM2195C1H620GB01# ±5% GQM2195C1H620JB01# ±2% GQM2195C1H680GB01# ±5% GQM2195C1H680JB01# ±2% GQM2195C1H750GB01# ±5% GQM2195C1H750JB01# ±2% GQM2195C1H820GB01# ±5% GQM2195C1H820JB01# 91pF ±2% GQM2195C1H910GB01# ±5% GQM2195C1H910JB01# 100pF ±2% GQM2195C1H101GB01# ±5% GQM2195C1H101JB01# ±2% GQM2192C1H200GB01# ±5% GQM2192C1H200JB01# ±2% GQM2192C1H220GB01# ±5% GQM2192C1H220JB01# ±2% GQM2192C1H240GB01# ±5% GQM2192C1H240JB01# ±2% GQM2192C1H270GB01# ±5% GQM2192C1H270JB01# ±2% GQM2192C1H300GB01# ±0.25pF GQM2194C2A1R8CB01# 2.0pF ±0.1pF GQM2194C2A2R0BB01# 15pF ±0.25pF GQM2194C2A2R0CB01# CJ 2.2pF ±0.1pF GQM2193C2A2R2BB01# 16pF ±0.25pF GQM2193C2A2R2CB01# 2.4pF ±0.1pF GQM2193C2A2R4BB01# 18pF ±0.25pF GQM2193C2A2R4CB01# 2.7pF ±0.1pF GQM2193C2A2R7BB01# 50Vdc C0G ±0.25pF GQM2193C2A2R7CB01# 3.0pF ±0.1pF GQM2193C2A3R0BB01# ±0.25pF GQM2193C2A3R0CB01# 3.3pF ±0.1pF GQM2193C2A3R3BB01# 24pF ±0.25pF GQM2193C2A3R3CB01# 3.6pF ±0.1pF GQM2193C2A3R6BB01# ±0.25pF GQM2193C2A3R6CB01# 3.9pF ±0.1pF GQM2193C2A3R9BB01# ±0.25pF GQM2193C2A3R9CB01# CH 4.0pF ±0.1pF GQM2192C2A4R0BB01# 33pF ±0.25pF GQM2192C2A4R0CB01# 4.3pF ±0.1pF GQM2192C2A4R3BB01# 36pF ±0.25pF GQM2192C2A4R3CB01# 4.7pF ±0.1pF GQM2192C2A4R7BB01# 39pF ±0.25pF GQM2192C2A4R7CB01# 5.0pF ±0.1pF GQM2192C2A5R0BB01# 5.1pF ±0.25pF GQM2192C2A5R1CB01# ±0.25pF GQM2192C2A5R0CB01# ±0.5pF GQM2192C2A5R1DB01# 5.6pF ±0.25pF GQM2192C2A5R6CB01# 51pF ±0.5pF GQM2192C2A5R6DB01# 6.0pF ±0.25pF GQM2192C2A6R0CB01# 56pF ±0.5pF GQM2192C2A6R0DB01# 6.2pF ±0.25pF GQM2192C2A6R2CB01# 62pF ±0.5pF GQM2192C2A6R2DB01# 6.8pF ±0.25pF GQM2192C2A6R8CB01# 68pF ±0.5pF GQM2192C2A6R8DB01# 7.0pF ±0.25pF GQM2192C2A7R0CB01# 75pF ±0.5pF GQM2192C2A7R0DB01# 7.5pF ±0.25pF GQM2192C2A7R5CB01# 82pF ±0.5pF GQM2192C2A7R5DB01# 8.0pF ±0.25pF GQM2192C2A8R0CB01# 8.2pF ±0.25pF GQM2192C2A8R2CB01# ±0.5pF GQM2192C2A8R0DB01# ±0.5pF GQM2192C2A8R2DB01# 9.0pF ±0.25pF GQM2192C2A9R0CB01# CH 20pF ±0.5pF GQM2192C2A9R0DB01# 9.1pF ±0.25pF GQM2192C2A9R1CB01# 22pF ±0.5pF GQM2192C2A9R1DB01# 10pF 11pF 12pF ±2% GQM2192C2A100GB01# ±5% GQM2192C2A100JB01# ±2% GQM2192C2A110GB01# ±5% GQM2192C2A110JB01# ±2% GQM2192C2A120GB01# 24pF 27pF 30pF Part Number For General Purpose GRM Series ±0.1pF GQM2194C2A1R8BB01# Cap. Capacitor Array GNM Series ±0.25pF GQM2194C2A1R6CB01# 1.8pF Rated TC Voltage Code Low ESL LLp Series 1.6pF T max. High-Q Type GJM Series Part Number High Frequency GQM Series CK Tol. Monolithic Microchip GMA Series 0.95mm 100Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. Part number # indicates the package specification code. 109 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GQM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 2.0×1.25mm) T max. Rated TC Voltage Code For General Purpose GRM Series 0.95mm 50Vdc CH Cap. Tol. 30pF ±5% GQM2192C1H300JB01# 33pF ±2% GQM2192C1H330GB01# ±5% GQM2192C1H330JB01# ±2% GQM2192C1H360GB01# ±5% GQM2192C1H360JB01# ±2% GQM2192C1H390GB01# ±5% GQM2192C1H390JB01# ±2% GQM2192C1H430GB01# ±5% GQM2192C1H430JB01# 47pF ±2% GQM2192C1H470GB01# ±5% GQM2192C1H470JB01# 51pF ±2% GQM2192C1H510GB01# ±5% GQM2192C1H510JB01# ±2% GQM2192C1H560GB01# ±5% GQM2192C1H560JB01# 62pF ±2% GQM2192C1H620GB01# ±5% GQM2192C1H620JB01# 68pF ±2% GQM2192C1H680GB01# ±5% GQM2192C1H680JB01# 75pF ±2% GQM2192C1H750GB01# ±5% GQM2192C1H750JB01# ±2% GQM2192C1H820GB01# ±5% GQM2192C1H820JB01# 91pF ±2% GQM2192C1H910GB01# ±5% GQM2192C1H910JB01# 100pF ±2% GQM2192C1H101GB01# ±5% GQM2192C1H101JB01# 36pF 39pF 43pF Capacitor Array GNM Series 56pF Low ESL LLp Series 82pF High-Q Type GJM Series 1mm 250Vdc C0G 0.5pF Part Number ±0.1pF GQM2195C2ER50BB12# T max. Rated TC Voltage Code Cap. 1mm 250Vdc C0G 3.0pF 3.3pF High Frequency GQM Series ±0.1pF GQM2195C2ER75BB12# 3.6pF ±0.1pF GQM2195C2E1R0BB12# 3.9pF ±0.1pF GQM2195C2E1R1BB12# 4.0pF Monolithic Microchip GMA Series ±0.1pF GQM2195C2E1R2BB12# 4.3pF ±0.1pF GQM2195C2E1R3BB12# ±0.1pF GQM2195C2E1R5BB12# 5.0pF ±0.1pF GQM2195C2E1R6BB12# For Bonding GMD Series ±0.1pF GQM2195C2E1R8BB12# ±0.1pF GQM2195C2E2R0BB12# 5.6pF ±0.25pF GQM2195C2E5R6CB12# 6.0pF ±0.25pF GQM2195C2E6R0CB12# ±0.5pF GQM2195C2E5R1DB12# ±0.5pF GQM2195C2E5R6DB12# ±0.5pF GQM2195C2E6R0DB12# 6.2pF ±0.25pF GQM2195C2E6R2CB12# 6.8pF ±0.25pF GQM2195C2E6R8CB12# 7.0pF ±0.25pF GQM2195C2E7R0CB12# 7.5pF ±0.25pF GQM2195C2E7R5CB12# 8.0pF ±0.25pF GQM2195C2E8R0CB12# ±0.5pF GQM2195C2E6R2DB12# ±0.5pF GQM2195C2E6R8DB12# ±0.5pF GQM2195C2E7R0DB12# ±0.5pF GQM2195C2E7R5DB12# ±0.5pF GQM2195C2E8R0DB12# 8.2pF ±0.25pF GQM2195C2E8R2CB12# 9.0pF ±0.25pF GQM2195C2E9R0CB12# 9.1pF ±0.25pF GQM2195C2E9R1CB12# ±0.5pF GQM2195C2E8R2DB12# ±0.5pF GQM2195C2E9R0DB12# ±0.5pF GQM2195C2E9R1DB12# ±2% GQM2195C2E100GB12# ±5% GQM2195C2E100JB12# ±2% GQM2195C2E110GB12# ±5% GQM2195C2E110JB12# 12pF ±2% GQM2195C2E120GB12# ±5% GQM2195C2E120JB12# 13pF ±2% GQM2195C2E130GB12# ±5% GQM2195C2E130JB12# ±2% GQM2195C2E150GB12# ±5% GQM2195C2E150JB12# ±2% GQM2195C2E160GB12# ±5% GQM2195C2E160JB12# ±2% GQM2195C2E180GB12# ±5% GQM2195C2E180JB12# ±2% GQM2195C2E200GB12# ±5% GQM2195C2E200JB12# ±2% GQM2195C2E220GB12# 10pF 11pF 15pF ±0.25pF GQM2195C2E2R0CB12# 2.2pF ±0.1pF GQM2195C2E2R2BB12# 16pF Product Information ±0.25pF GQM2195C2E2R2CB12# 2.4pF ±0.1pF GQM2195C2E2R4BB12# 18pF ±0.25pF GQM2195C2E2R4CB12# 2.7pF ±0.1pF GQM2195C2E2R7BB12# 20pF ±0.25pF GQM2195C2E2R7CB12# 3.0pF ±0.1pF GQM2195C2E3R0BB12# ±0.1pF GQM2195C2E5R0BB12# ±0.25pF GQM2195C2E5R1CB12# ±0.25pF GQM2195C2E1R8CB12# 2.0pF ±0.1pF GQM2195C2E4R7BB12# 5.1pF ±0.25pF GQM2195C2E1R6CB12# 1.8pF ±0.1pF GQM2195C2E4R3BB12# ±0.25pF GQM2195C2E5R0CB12# ±0.25pF GQM2195C2E1R5CB12# 1.6pF ±0.1pF GQM2195C2E4R0BB12# ±0.25pF GQM2195C2E4R7CB12# ±0.25pF GQM2195C2E1R3CB12# 1.5pF ±0.1pF GQM2195C2E3R9BB12# ±0.25pF GQM2195C2E4R3CB12# 4.7pF ±0.25pF GQM2195C2E1R2CB12# 1.3pF ±0.1pF GQM2195C2E3R6BB12# ±0.25pF GQM2195C2E4R0CB12# ±0.25pF GQM2195C2E1R1CB12# 1.2pF ±0.1pF GQM2195C2E3R3BB12# ±0.25pF GQM2195C2E3R9CB12# ±0.25pF GQM2195C2E1R0CB12# 1.1pF ±0.25pF GQM2195C2E3R0CB12# ±0.25pF GQM2195C2E3R6CB12# ±0.25pF GQM2195C2ER75CB12# 1.0pF Part Number ±0.25pF GQM2195C2E3R3CB12# ±0.25pF GQM2195C2ER50CB12# 0.75pF Tol. 22pF Part number # indicates the package specification code. 110 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GQM Series Temperature Compensating Type HiQ Oct.1,2012 Part Number List (→ c 2.0×1.25mm) 250Vdc C0G 22pF ±5% GQM2195C2E220JB12# 24pF ±2% GQM2195C2E240GB12# ±5% GQM2195C2E240JB12# 27pF ±2% GQM2195C2E270GB12# ±5% GQM2195C2E270JB12# ±2% GQM2195C2E300GB12# ±5% GQM2195C2E300JB12# 33pF ±2% GQM2195C2E330GB12# ±5% GQM2195C2E330JB12# 36pF ±2% GQM2195C2E360GB12# ±5% GQM2195C2E360JB12# 39pF ±2% GQM2195C2E390GB12# ±5% GQM2195C2E390JB12# 43pF ±2% GQM2195C2E430GB12# ±5% GQM2195C2E430JB12# 47pF ±2% GQM2195C2E470GB12# ±5% GQM2195C2E470JB12# 51pF ±2% GQM2195C2E510GB12# ±5% GQM2195C2E510JB12# 56pF ±2% GQM2195C2E560GB12# ±5% GQM2195C2E560JB12# ±2% GQM2195C2E620GB12# ±5% GQM2195C2E620JB12# 68pF ±2% GQM2195C2E680GB12# ±5% GQM2195C2E680JB12# 75pF ±2% GQM2195C2E750GB12# ±5% GQM2195C2E750JB12# 82pF ±2% GQM2195C2E820GB12# ±5% GQM2195C2E820JB12# ±2% GQM2195C2E910GB12# ±5% GQM2195C2E910JB12# ±2% GQM2195C2E101GB12# ±5% GQM2195C2E101JB12# 30pF 62pF 91pF 100pF T max. Rated TC Voltage Code Cap. 1.35mm 500Vdc C0G 1.8pF Tol. Part Number ±0.1pF GQM22M5C2H1R8BB01# For General Purpose GRM Series 1mm Part Number ±0.25pF GQM22M5C2H1R8CB01# 2.0pF ±0.1pF GQM22M5C2H2R0BB01# ±0.25pF GQM22M5C2H2R0CB01# 2.2pF ±0.1pF GQM22M5C2H2R2BB01# ±0.25pF GQM22M5C2H2R2CB01# 2.4pF ±0.1pF GQM22M5C2H2R4BB01# ±0.25pF GQM22M5C2H2R4CB01# 2.7pF Capacitor Array GNM Series Tol. ±0.1pF GQM22M5C2H2R7BB01# ±0.25pF GQM22M5C2H2R7CB01# 3.0pF ±0.1pF GQM22M5C2H3R0BB01# ±0.25pF GQM22M5C2H3R0CB01# 3.3pF ±0.1pF GQM22M5C2H3R3BB01# ±0.25pF GQM22M5C2H3R3CB01# 3.6pF ±0.1pF GQM22M5C2H3R6BB01# Low ESL LLp Series Cap. ±0.25pF GQM22M5C2H3R6CB01# 3.9pF ±0.1pF GQM22M5C2H3R9BB01# ±0.25pF GQM22M5C2H3R9CB01# 4.0pF ±0.1pF GQM22M5C2H4R0BB01# ±0.25pF GQM22M5C2H4R0CB01# 4.3pF ±0.1pF GQM22M5C2H4R3BB01# ±0.25pF GQM22M5C2H4R3CB01# 4.7pF High-Q Type GJM Series Rated TC Voltage Code ±0.1pF GQM22M5C2H4R7BB01# ±0.25pF GQM22M5C2H4R7CB01# 5.0pF ±0.1pF GQM22M5C2H5R0BB01# ±0.25pF GQM22M5C2H5R0CB01# 5.1pF ±0.25pF GQM22M5C2H5R1CB01# 5.6pF ±0.25pF GQM22M5C2H5R6CB01# 6.0pF ±0.25pF GQM22M5C2H6R0CB01# 6.2pF ±0.25pF GQM22M5C2H6R2CB01# 6.8pF ±0.25pF GQM22M5C2H6R8CB01# 7.0pF ±0.25pF GQM22M5C2H7R0CB01# 7.5pF ±0.25pF GQM22M5C2H7R5CB01# 8.0pF ±0.25pF GQM22M5C2H8R0CB01# ±0.5pF GQM22M5C2H5R1DB01# High Frequency GQM Series T max. ±0.5pF GQM22M5C2H5R6DB01# ±0.5pF GQM22M5C2H6R0DB01# c 2.8×2.8mm ±0.5pF GQM22M5C2H6R8DB01# Rated TC Voltage Code Cap. 1.35mm 500Vdc C0G 0.5pF Tol. Part Number ±0.5pF GQM22M5C2H7R0DB01# ±0.25pF GQM22M5C2HR50CB01# 0.75pF ±0.1pF GQM22M5C2HR75BB01# ±0.5pF GQM22M5C2H7R5DB01# ±0.25pF GQM22M5C2HR75CB01# 1.0pF ±0.1pF GQM22M5C2H1R0BB01# ±0.5pF GQM22M5C2H8R0DB01# 8.2pF ±0.25pF GQM22M5C2H8R2CB01# 9.0pF ±0.25pF GQM22M5C2H9R0CB01# 9.1pF ±0.25pF GQM22M5C2H9R1CB01# ±0.25pF GQM22M5C2H1R0CB01# 1.1pF ±0.1pF GQM22M5C2H1R1BB01# ±0.5pF GQM22M5C2H8R2DB01# ±0.25pF GQM22M5C2H1R1CB01# 1.2pF ±0.1pF GQM22M5C2H1R2BB01# ±0.5pF GQM22M5C2H9R0DB01# ±0.25pF GQM22M5C2H1R2CB01# 1.3pF ±0.1pF GQM22M5C2H1R3BB01# ±0.5pF GQM22M5C2H9R1DB01# 10pF ±0.25pF GQM22M5C2H1R3CB01# 1.5pF ±0.1pF GQM22M5C2H1R5BB01# 11pF ±0.25pF GQM22M5C2H1R5CB01# 1.6pF ±0.1pF GQM22M5C2H1R6BB01# ±0.25pF GQM22M5C2H1R6CB01# For Bonding GMD Series ±0.1pF GQM22M5C2HR50BB01# 12pF ±2% GQM22M5C2H100GB01# ±5% GQM22M5C2H100JB01# ±2% GQM22M5C2H110GB01# ±5% GQM22M5C2H110JB01# ±2% GQM22M5C2H120GB01# ±5% GQM22M5C2H120JB01# Product Information T max. Monolithic Microchip GMA Series ±0.5pF GQM22M5C2H6R2DB01# Part number # indicates the package specification code. 111 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. GQM Series Temperature Compensating Type HiQ C02E.pdf Oct.1,2012 Part Number List (→ c 2.8×2.8mm) T max. For General Purpose GRM Series Rated TC Voltage Code Cap. Tol. Part Number 1.35mm 500Vdc C0G 13pF ±2% GQM22M5C2H130GB01# ±5% GQM22M5C2H130JB01# ±2% GQM22M5C2H150GB01# ±5% GQM22M5C2H150JB01# 16pF ±2% GQM22M5C2H160GB01# ±5% GQM22M5C2H160JB01# 18pF ±2% GQM22M5C2H180GB01# ±5% GQM22M5C2H180JB01# ±2% GQM22M5C2H200GB01# ±5% GQM22M5C2H200JB01# ±2% GQM22M5C2H220GB01# ±5% GQM22M5C2H220JB01# ±2% GQM22M5C2H240GB01# ±5% GQM22M5C2H240JB01# ±2% GQM22M5C2H270GB01# ±5% GQM22M5C2H270JB01# ±2% GQM22M5C2H300GB01# ±5% GQM22M5C2H300JB01# ±2% GQM22M5C2H330GB01# ±5% GQM22M5C2H330JB01# 36pF ±2% GQM22M5C2H360GB01# ±5% GQM22M5C2H360JB01# 39pF ±2% GQM22M5C2H390GB01# ±5% GQM22M5C2H390JB01# ±2% GQM22M5C2H430GB01# ±5% GQM22M5C2H430JB01# ±2% GQM22M5C2H470GB01# ±5% GQM22M5C2H470JB01# ±2% GQM22M5C2H510GB01# ±5% GQM22M5C2H510JB01# 56pF ±2% GQM22M5C2H560GB01# ±5% GQM22M5C2H560JB01# 62pF ±2% GQM22M5C2H620GB01# ±5% GQM22M5C2H620JB01# ±2% GQM22M5C2H680GB01# ±5% GQM22M5C2H680JB01# 75pF ±2% GQM22M5C2H750GB01# ±5% GQM22M5C2H750JB01# 82pF ±2% GQM22M5C2H820GB01# ±5% GQM22M5C2H820JB01# ±2% GQM22M5C2H910GB01# ±5% GQM22M5C2H910JB01# ±2% GQM22M5C2H101GB01# ±5% GQM22M5C2H101JB01# 15pF Capacitor Array GNM Series 20pF 22pF 24pF 27pF Low ESL LLp Series 30pF 33pF High-Q Type GJM Series 43pF 47pF High Frequency GQM Series 51pF Monolithic Microchip GMA Series 68pF 91pF For Bonding GMD Series 100pF Product Information Part number # indicates the package specification code. 112 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf Oct.1,2012 Chip Monolithic Ceramic Capacitors For General Purpose GRM Series Monolithic Microchip GMA Series Capacitor for wire bonding. Can also be mounted directly to a frame!! T Capacitor Array GNM Series W L 1 Excellent high frequency characteristics. 2 Ideal for bypass applications. Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q Type GJM Series Low ESL LLp Series 3 High density mounting is possible. 113 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GMA Series High Dielectric Constant Type Part Number List c 0.38×0.38mm For General Purpose GRM Series T max. Rated TC Voltage Code 0.35mm 10Vdc Cap. X7R 10000pF R T max. Ultracompact 10000pF Tol. Part Number 0.6mm Rated TC Voltage Code 10Vdc Capacitor Array GNM Series T max. ±20% GMA085R71A333MA01# ±20% GMA085R71A473MA01# ±20% GMA0D3R71A103MA01# 68000pF ±20% GMA085R71A683MA01# ±20% GMA0D3R11A103MA01# 0.1µF ±20% GMA085R71A104MA01# 33000pF ±20% GMA085R11A333MA01# 47000pF ±20% GMA085R11A473MA01# 68000pF ±20% GMA085R11A683MA01# 0.1µF ±20% GMA085R11A104MA01# 33000pF ±20% GMA085B11A333MA01# B GMA05XR72A101MA01# 47000pF ±20% GMA085B11A473MA01# 150pF ±20% GMA05XR72A151MA01# 68000pF ±20% GMA085B11A683MA01# 220pF ±20% GMA05XR72A221MA01# 0.1µF ±20% GMA085B11A104MA01# 330pF ±20% GMA05XR72A331MA01# X5R 0.47µF ±20% GMA085R60J474ME12# 470pF ±20% GMA05XR72A471MA01# B 0.47µF ±20% GMA085B30J474ME12# 680pF ±20% GMA05XR72A681MA01# 1000pF ±20% GMA05XR72A102MA01# 1500pF ±20% GMA05XR71E152MA11# 2200pF ±20% GMA05XR71E222MA11# 3300pF ±20% GMA05XR71E332MA11# 4700pF ±20% GMA05XR71E472MA11# 1500pF ±20% GMA05XB31E152MA11# 2200pF ±20% GMA05XB31E222MA11# 3300pF ±20% GMA05XB31E332MA11# 4700pF ±20% GMA05XB31E472MA11# 6800pF ±20% GMA05XR71A682MA01# 10000pF ±20% GMA05XR71A103MA01# 15000pF ±20% GMA05XR71A153MA01# 22000pF ±20% GMA05XR71A223MA01# 6800pF ±20% GMA05XR11A682MA01# 10000pF ±20% GMA05XR11A103MA01# 15000pF ±20% GMA05XR11A153MA01# 22000pF ±20% GMA05XR11A223MA01# 6800pF ±20% GMA05XB11A682MA01# 10000pF ±20% GMA05XB11A103MA01# 15000pF ±20% GMA05XB11A153MA01# 22000pF ±20% GMA05XB11A223MA01# X5R 0.1µF ±20% GMA05XR60J104ME12# B 0.1µF ±20% GMA05XB30J104ME12# Cap. Tol. 1500pF ±20% GMA085R72A152MA01# 2200pF ±20% GMA085R72A222MA01# 3300pF ±20% GMA085R72A332MA01# 4700pF ±20% GMA085R72A472MA01# Low ESL LLp Series X7R High-Q Type GJM Series X7R High Frequency GQM Series R B Monolithic Microchip GMA Series 6.3Vdc Part Number ±20% B 10Vdc Tol. 100pF 0.4mm 100Vdc X7R 25Vdc Cap. Part Number 47000pF Ultracompact Rated TC Voltage Code Tol. X7R 33000pF R c 0.5×0.5mm Cap. 6.3Vdc c 0.8×0.8mm For Bonding GMD Series T max. Rated TC Voltage Code 0.6mm 100Vdc X7R Product Information 25Vdc Part Number 6800pF ±20% GMA085R72A682MA01# X7R 10000pF ±20% GMA085R71E103MA11# 15000pF ±20% GMA085R71E153MA11# 22000pF ±20% GMA085R71E223MA11# 10000pF ±20% GMA085B31E103MA11# 15000pF ±20% GMA085B31E153MA11# 22000pF ±20% GMA085B31E223MA11# B Part number # indicates the package specification code. 114 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf Oct.1,2012 Chip Monolithic Ceramic Capacitors For General Purpose GRM Series For Bonding GMD Series Capacitor for wire bonding. Compatible up to 0.6x0.3mm size!! e g e Capacitor Array GNM Series T W L 1 Compact product sizes of 0.6x0.3x0.3mm, 1.0x0.5x0.5mm 2 Can be mounted by wire bonding and AuSn soldering. Product Information For Bonding GMD Series Monolithic Microchip GMA Series High Frequency GQM Series High-Q Type GJM Series Low ESL LLp Series 3 Ideal for mounting in optical communication related devices and IC packages. 115 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GMD Series High Dielectric Constant Type Part Number List c 0.6×0.3mm For General Purpose GRM Series T max. Rated TC Voltage Code 0.33mm 25Vdc X7R Capacitor Array GNM Series Low ESL LLp Series R High-Q Type GJM Series High Frequency GQM Series B Monolithic Microchip GMA Series For Bonding GMD Series 16Vdc T max. Ultracompact X7R Product Information R Cap. Tol. Part Number Rated TC Voltage Code 0.33mm 16Vdc Cap. Tol. Part Number R 3300pF ±10% GMD033R11C332KA11# B 1800pF ±10% GMD033B31C182KA11# 100pF ±10% GMD033R71E101KA01# 2200pF ±10% GMD033B31C222KA11# 120pF ±10% GMD033R71E121KA01# 2700pF ±10% GMD033B31C272KA11# 150pF ±10% GMD033R71E151KA01# 3300pF ±10% GMD033B31C332KA11# 180pF ±10% GMD033R71E181KA01# 3900pF ±10% GMD033R71A392KA01# 220pF ±10% GMD033R71E221KA01# 4700pF ±10% GMD033R71A472KA01# 270pF ±10% GMD033R71E271KA01# 5600pF ±10% GMD033R71A562KA01# 330pF ±10% GMD033R71E331KA01# 6800pF ±10% GMD033R71A682KA01# 390pF ±10% GMD033R71E391KA01# 8200pF ±10% GMD033R71A822KA01# 470pF ±10% GMD033R71E471KA01# 10000pF ±10% GMD033R71A103KA01# 560pF ±10% GMD033R71E561KA01# 3900pF ±10% GMD033R11A392KA01# 680pF ±10% GMD033R71E681KA01# 4700pF ±10% GMD033R11A472KA01# 820pF ±10% GMD033R71E821KA01# 5600pF ±10% GMD033R11A562KA01# 1000pF ±10% GMD033R71E102KA01# 6800pF ±10% GMD033R11A682KA01# 1200pF ±10% GMD033R71E122KA01# 8200pF ±10% GMD033R11A822KA01# 1500pF ±10% GMD033R71E152KA01# 10000pF ±10% GMD033R11A103KA01# 100pF ±10% GMD033R11E101KA01# 3900pF ±10% GMD033B11A392KA01# 120pF ±10% GMD033R11E121KA01# 4700pF ±10% GMD033B11A472KA01# 150pF ±10% GMD033R11E151KA01# 5600pF ±10% GMD033B11A562KA01# 180pF ±10% GMD033R11E181KA01# 6800pF ±10% GMD033B11A682KA01# 220pF ±10% GMD033R11E221KA01# 8200pF ±10% GMD033B11A822KA01# 270pF ±10% GMD033R11E271KA01# 10000pF ±10% GMD033B11A103KA01# 330pF ±10% GMD033R11E331KA01# X5R 56000pF ±10% GMD033R60J563KE11# 390pF ±10% GMD033R11E391KA01# 68000pF ±10% GMD033R60J683KE11# 470pF ±10% GMD033R11E471KA01# 82000pF ±10% GMD033R60J823KE11# 560pF ±10% GMD033R11E561KA01# 680pF ±10% GMD033R11E681KA01# 820pF ±10% 1000pF 10Vdc X7R R B 6.3Vdc 0.1µF ±10% GMD033R60J104KE11# 56000pF ±10% GMD033B30J563KE11# GMD033R11E821KA01# 68000pF ±10% GMD033B30J683KE11# ±10% GMD033R11E102KA01# 82000pF ±10% GMD033B30J823KE11# 1200pF ±10% GMD033R11E122KA01# 0.1µF ±10% GMD033B30J104KE11# 1500pF ±10% GMD033R11E152KA01# 100pF ±10% GMD033B11E101KA01# 120pF ±10% GMD033B11E121KA01# 150pF ±10% GMD033B11E151KA01# Cap. Tol. 180pF ±10% GMD033B11E181KA01# 220pF ±10% GMD033B11E221KA01# 220pF ±10% GMD155R71H221KA01# 270pF ±10% GMD033B11E271KA01# 270pF ±10% GMD155R71H271KA01# 330pF ±10% GMD033B11E331KA01# 330pF ±10% GMD155R71H331KA01# 390pF ±10% GMD033B11E391KA01# 390pF ±10% GMD155R71H391KA01# 470pF ±10% GMD033B11E471KA01# 470pF ±10% GMD155R71H471KA01# 560pF ±10% GMD033B11E561KA01# 560pF ±10% GMD155R71H561KA01# 680pF ±10% GMD033B11E681KA01# 680pF ±10% GMD155R71H681KA01# 820pF ±10% GMD033B11E821KA01# 820pF ±10% GMD155R71H821KA01# 1000pF ±10% GMD033B11E102KA01# 1000pF ±10% GMD155R71H102KA01# 1200pF ±10% GMD033B11E122KA01# 1200pF ±10% GMD155R71H122KA01# 1500pF ±10% GMD033B11E152KA01# 1500pF ±10% GMD155R71H152KA01# 1800pF ±10% GMD033R71C182KA11# 1800pF ±10% GMD155R71H182KA01# 2200pF ±10% GMD033R71C222KA11# 2200pF ±10% GMD155R71H222KA01# 2700pF ±10% GMD033R71C272KA11# 2700pF ±10% GMD155R71H272KA01# 3300pF ±10% GMD033R71C332KA11# 3300pF ±10% GMD155R71H332KA01# 1800pF ±10% GMD033R11C182KA11# 3900pF ±10% GMD155R71H392KA01# 2200pF ±10% GMD033R11C222KA11# 4700pF ±10% GMD155R71H472KA01# 2700pF ±10% GMD033R11C272KA11# 220pF ±10% GMD155R11H221KA01# B c 1.0×0.5mm T max. Rated TC Voltage Code 0.55mm 50Vdc X7R R Part Number Part number # indicates the package specification code. 116 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GMD Series High Dielectric Constant Type Part Number List (→ c 1.0×0.5mm) 25Vdc X7R R Tol. GMD155R11H271KA01# ±10% GMD155R11H331KA01# 33000pF ±10% GMD155R11E333KA11# 39000pF ±10% 390pF ±10% GMD155R11H391KA01# GMD155R11E393KA11# 47000pF ±10% 470pF ±10% GMD155R11H471KA01# GMD155R11E473KA11# 5600pF ±10% 560pF ±10% GMD155R11H561KA01# GMD155B11E562KA01# 6800pF ±10% GMD155B11E682KA01# 680pF ±10% 820pF ±10% GMD155R11H681KA01# 8200pF ±10% GMD155B11E822KA01# GMD155R11H821KA01# 10000pF ±10% 1000pF GMD155B11E103KA01# ±10% GMD155R11H102KA01# 12000pF ±10% GMD155B11E123KA01# 1200pF ±10% GMD155R11H122KA01# 15000pF ±10% GMD155B11E153KA01# 1500pF ±10% GMD155R11H152KA01# 18000pF ±10% GMD155B11E183KA01# 1800pF ±10% GMD155R11H182KA01# 22000pF ±10% GMD155B11E223KA01# 2200pF ±10% GMD155R11H222KA01# 27000pF ±10% GMD155B31E273KA11# 2700pF ±10% GMD155R11H272KA01# 33000pF ±10% GMD155B31E333KA11# 3300pF ±10% GMD155R11H332KA01# 39000pF ±10% GMD155B31E393KA11# 3900pF ±10% GMD155R11H392KA01# 47000pF ±10% GMD155B31E473KA11# 4700pF ±10% GMD155R11H472KA01# X7R 56000pF ±10% GMD155R71C563KA11# 220pF ±10% GMD155B11H221KA01# 68000pF ±10% GMD155R71C683KA11# 270pF ±10% GMD155B11H271KA01# 82000pF ±10% GMD155R71C823KA11# 330pF ±10% GMD155B11H331KA01# 0.1µF ±10% GMD155R71C104KA11# 390pF ±10% GMD155B11H391KA01# 56000pF ±10% GMD155R11C563KA11# 470pF ±10% GMD155B11H471KA01# 68000pF ±10% GMD155R11C683KA11# 560pF ±10% GMD155B11H561KA01# 82000pF ±10% GMD155R11C823KA11# 680pF ±10% GMD155B11H681KA01# 0.1µF ±10% GMD155R11C104KA11# 820pF ±10% GMD155B11H821KA01# 56000pF ±10% GMD155B31C563KA11# 1000pF ±10% GMD155B11H102KA01# 68000pF ±10% GMD155B31C683KA11# 1200pF ±10% GMD155B11H122KA01# 82000pF ±10% GMD155B31C823KA11# 1500pF ±10% GMD155B11H152KA01# 1800pF ±10% GMD155B11H182KA01# 2200pF ±10% 2700pF 0.55mm 25Vdc R B 16Vdc R B Part Number 0.1µF ±10% GMD155B31C104KA11# 0.12µF ±10% GMD155R61A124KE12# GMD155B11H222KA01# 0.15µF ±10% GMD155R61A154KE12# ±10% GMD155B11H272KA01# 0.18µF ±10% GMD155R61A184KE12# 3300pF ±10% GMD155B11H332KA01# 0.22µF ±10% GMD155R61A224KE12# 3900pF ±10% GMD155B11H392KA01# 0.27µF ±10% GMD155R61A274KE11# 4700pF ±10% GMD155B11H472KA01# 0.33µF ±10% GMD155R61A334KE11# 5600pF ±10% GMD155R71E562KA01# 0.39µF ±10% GMD155R61A394KE11# 6800pF ±10% GMD155R71E682KA01# 0.47µF ±10% GMD155R61A474KE11# 8200pF ±10% GMD155R71E822KA01# 0.12µF ±10% GMD155B31A124KE12# 10000pF ±10% GMD155R71E103KA01# 0.15µF ±10% GMD155B31A154KE12# 12000pF ±10% GMD155R71E123KA01# 0.18µF ±10% GMD155B31A184KE12# 15000pF ±10% GMD155R71E153KA01# 0.22µF ±10% GMD155B31A224KE12# 18000pF ±10% GMD155R71E183KA01# 0.27µF ±10% GMD155B31A274KE11# 22000pF ±10% GMD155R71E223KA01# 0.33µF ±10% GMD155B31A334KE11# 27000pF ±10% GMD155R71E273KA11# 0.39µF ±10% GMD155B31A394KE11# 33000pF ±10% GMD155R71E333KA11# 0.47µF ±10% GMD155B31A474KE11# 39000pF ±10% GMD155R71E393KA11# 47000pF ±10% GMD155R71E473KA11# 5600pF ±10% GMD155R11E562KA01# 6800pF ±10% GMD155R11E682KA01# 8200pF ±10% GMD155R11E822KA01# 10000pF ±10% GMD155R11E103KA01# 12000pF ±10% GMD155R11E123KA01# 15000pF ±10% GMD155R11E153KA01# 18000pF ±10% GMD155R11E183KA01# 22000pF ±10% GMD155R11E223KA01# 27000pF ±10% GMD155R11E273KA11# 10Vdc X5R B For General Purpose GRM Series Cap. Capacitor Array GNM Series ±10% 330pF Rated TC Voltage Code Low ESL LLp Series 270pF T max. High-Q Type GJM Series B Part Number High Frequency GQM Series R Tol. Monolithic Microchip GMA Series 0.55mm 50Vdc Cap. For Bonding GMD Series Rated TC Voltage Code Product Information T max. Part number # indicates the package specification code. 117 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution/Notice For General !Caution For General Purpose GRM Series c Storage and Operation Conditions ........................ 119 Notice c Rating .................................................................... 129 1. Operating Temperature ..................................... 129 c Rating .................................................................... 119 2. Atmosphere Surroundings ................................. 129 1. Temperature Dependent Characteristics........... 119 3. Piezo-electric Phenomenon............................... 129 Capacitor Array GNM Series 2. Measurement of Capacitance............................ 120 3. Applied Voltage ................................................. 120 c Soldering and Mounting ........................................ 129 4. Applied Voltage and Self-heating Temperature .................................. 120 1. PCB Design ....................................................... 129 5. DC Voltage and AC Voltage Characteristic ....... 121 6. Capacitance Aging ............................................ 121 Low ESL LLp Series 7. Vibration and Shock .......................................... 122 c Soldering and Mounting ........................................ 122 1. Mounting Position .............................................. 122 2. Information before Mounting.............................. 123 High-Q Type GJM Series 3. Maintenance of the Mounting (pick and place) Machine ............................................................. 123 4-1. Reflow Soldering ............................................ 124 4-2. Flow Soldering................................................ 125 High Frequency GQM Series 4-3. Correction with a Soldering Iron ..................... 126 4-4. Leaded Component Insertion ......................... 126 5. Washing............................................................. 126 6. Electrical Test on Printed Circuit Board ............. 127 7. Printed Circuit Board Cropping .......................... 127 Monolithic Microchip GMA Series c Others.................................................................... 128 1. Under Operation of Equipment .......................... 128 2. Others ................................................................ 128 For Bonding GMD Series Product Information !Caution/Notice 118 1. Notice for Pattern Forms ............................... 129 2. Land Dimensions ........................................... 130 2. Adhesive Application ......................................... 131 3. Adhesive Curing ................................................ 132 4. Flux Application ................................................. 132 5. Flow Soldering ................................................... 132 6. Washing............................................................. 132 7. Coating .............................................................. 133 8. Die Bonding/Wire Bonding (GMA or GMD Series) ....................................... 133 c Others.................................................................... 133 1. Transportation ................................................... 133 C02E.pdf Oct.1,2012 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution 1. Temperature Dependent Characteristics 1. The electrical characteristics of the capacitor can change with temperature. 1-1. For capacitors having larger temperature dependency, the capacitance may change with temperature changes. The following actions are recommended in order to ensure suitable capacitance values. (1) Select a suitable capacitance for the operating temperature range. 20 15 15 Capacitance Change (%) 20 10 5 0 -5 -10 -15 -20 -75 -50 -25 0 25 50 75 100 Temperature (°C) 10 5 0 -5 -10 -15 -20 -75 -50 -25 0 25 50 75 100 125 150 Temperature (°C) For Bonding GMD Series Typical Temperature Characteristics F5(Y5V) 40 20 0 -20 Product Information !Caution Capacitance Change (%) Capacitor Array GNM Series High Frequency GQM Series Typical Temperature Characteristics R7(X7R) Typical Temperature Characteristics R6(X5R) Capacitance Change (%) (2) The capacitance may change within the rated temperature. When you use a high dielectric constant type capacitor in a circuit that needs a tight (narrow) capacitance tolerance (e.g., a time-constant circuit), please carefully consider the characteristics of these capacitors, such as their aging, voltage, and temperature characteristics. In addition, check capacitors using your actual appliances at the intended environment and operating conditions. Low ESL LLp Series c Rating High-Q Type GJM Series 1-2. Corrosive gas can react with the termination (external) electrodes or lead wires of capacitors, and result in poor solderability. Do not store the capacitors in an atmosphere consisting of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas, etc.). 1-3. Due to moisture condensation caused by rapid humidity changes, or the photochemical change caused by direct sunlight on the terminal electrodes and/or the resin/epoxy coatings, the solderability and electrical performance may deteriorate. Do not store capacitors under direct sunlight or in high humidity conditions. Monolithic Microchip GMA Series 1. The performance of chip monolithic ceramic capacitors may be affected by the storage conditions. 1-1. Store capacitors in the following conditions: Temperature of +5°C to +40°C and a Relative Humidity of 20% to 70%. (1) Sunlight, dust, rapid temperature changes, corrosive gas atmosphere or high temperature and humidity conditions during storage may affect solderability and packaging performance. Please use product within six months of receipt. (2) Please confirm solderability before using after six months. Store the capacitors without opening the original bag. Even if the storage period is short, do not exceed the specified atmospheric conditions. For General Purpose GRM Series c Storage and Operation Conditions -40 -60 -80 -100 -50 -25 0 25 50 75 100 Temperature (°C) Continued on the following page. 119 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution Continued from the preceding page. For General Purpose GRM Series 2. Measurement of Capacitance 1. Measure capacitance with the voltage and the frequency specified in the product specifications. 1-1. The output voltage of the measuring equipment may decrease occasionally when capacitance is high. Please confirm whether a prescribed measured voltage is impressed to the capacitor. 1-2. The capacitance values of high dielectric constant type capacitors change depending on the AC voltage applied. Please consider the AC voltage characteristics when selecting a capacitor to be used in an AC circuit. Capacitor Array GNM Series Low ESL LLp Series 3. Applied Voltage 1. Do not apply a voltage to the capacitor that exceeds the rated voltage as called out in the specifications. 1-1. Applied voltage between the terminals of a capacitor shall be less than or equal to the rated voltage. (1) When AC voltage is superimposed on DC voltage, the zero-to-peak voltage shall not exceed the rated DC voltage. When AC voltage or pulse voltage is applied, the peak-to-peak voltage shall not exceed the rated DC voltage. (2) Abnormal voltages (surge voltage, static electricity, pulse voltage, etc.) shall not exceed the rated DC voltage. High-Q Type GJM Series Typical Voltage Applied to the DC Capacitor DC Voltage E DC Voltage+AC E AC Voltage E Pulse Voltage 0 E 0 High Frequency GQM Series 0 0 (E: Maximum possible applied voltage.) Monolithic Microchip GMA Series 1-2. Influence of overvoltage Overvoltage that is applied to the capacitor may result in an electrical short circuit caused by the breakdown of the internal dielectric layers. The time duration until breakdown depends on the applied voltage and the ambient temperature. For Bonding GMD Series Product Information !Caution 4. Applied Voltage and Self-heating Temperature 1. When the capacitor is used in a high-frequency voltage, pulse voltage, application, be sure to take into account self-heating may be caused by resistant factors of the capacitor. 1-1. The load should be contained to the level such that when measuring at atmospheric temperature of 25°C, the product's self-heating remains below 20°C and surface temperature of the capacitor in the actual circuit remains within the maximum operating temperature. Continued on the following page. 120 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution Continued from the preceding page. For General Purpose GRM Series [DC Voltage Characteristics] 0 -20 -40 -60 -80 -100 0 1 2 3 4 5 6 7 High-Q Type GJM Series Low ESL LLp Series DC Voltage (VDC) [AC Voltage Characteristics] 30 20 10 High Frequency GQM Series 0 -10 -20 -30 -40 -50 0.5 1.0 1.5 2.0 2.5 Monolithic Microchip GMA Series -60 0.0 AC Voltage (Vr.m.s.) 20 For Bonding GMD Series 10 0 -10 -20 5C RΔ -30 -40 10 100 1000 10000 Time (Hr) Continued on the following page. 121 Product Information !Caution Capacitor Change (%) 6. Capacitance Aging 1. The high dielectric constant type capacitors have the characteristic in which the capacitance value decreases with the passage of time. When you use a high dielectric constant type capacitors in a circuit that needs a tight (narrow) capacitance tolerance (e.g., a time-constant circuit), please carefully consider the characteristics of these capacitors, such as their aging, voltage, and temperature characteristics. In addition, check capacitors using your actual appliances at the intended environment and operating conditions. Capacitor Array GNM Series Capacitance Change (%) 20 Capacitance Change (%) 5. DC Voltage and AC Voltage Characteristics 1. The capacitance value of a high dielectric constant type capacitor changes depending on the DC voltage applied. Please consider the DC voltage characteristics when a capacitor is selected for use in a DC circuit. 1-1. The capacitance of ceramic capacitors may change sharply depending on the applied voltage (see figure). Please confirm the following in order to secure the capacitance. (1) Determine whether the capacitance change caused by the applied voltage is within the allowed range. (2) In the DC voltage characteristics, the rate of capacitance change becomes larger as voltage increases, even if the applied voltage is below the rated voltage. When a high dielectric constant type capacitor is in a circuit that needs a tight (narrow) capacitance tolerance (e.g., a timeconstant circuit), please carefully consider the characteristics of these capacitors, such as their aging, voltage, and temperature characteristics. In addition, check capacitors using your actual appliances at the intended environment and operating conditions. 2. The capacitance values of high dielectric constant type capacitors change depending on the AC voltage applied. Please consider the AC voltage characteristics when selecting a capacitor to be used in an AC circuit. C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution Continued from the preceding page. For General Purpose GRM Series Capacitor Array GNM Series 7. Vibration and Shock 1. Please confirm the kind of vibration and/or shock, its condition, and any generation of resonance. Please mount the capacitor so as not to generate resonance, and do not allow any impact on the terminals. 2. Mechanical shock due to being dropped may cause damage or a crack in the dielectric material of the capacitor. Do not use a dropped capacitor because the quality and reliability may be deteriorated. 3. When printed circuit boards are piled up or handled, the corner of another printed circuit board should not be allowed to hit the capacitor, in order to avoid a crack or other damage to the capacitor. Crack Floor Mounting printed circuit board Crack Low ESL LLp Series c Soldering and Mounting 1. Mounting Position High-Q Type GJM Series 1. Confirm the best mounting position and direction that minimizes the stress imposed on the capacitor during flexing or bending the printed circuit board. 1-1. Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. [Component Direction] Locate chip horizontal to the direction in which stress acts. [Chip Mounting Close to Board Separation Point] Perforation High Frequency GQM Series A C B Chip arrangement Worst A-C-(B~D) Best D Slit Continued on the following page. Monolithic Microchip GMA Series For Bonding GMD Series Product Information !Caution 122 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution Continued from the preceding page. 2. Information before Mounting Low ESL LLp Series Capacitor Array GNM Series For General Purpose GRM Series 1. Do not reuse capacitors that were removed from the equipment. 2. Confirm capacitance characteristics under actual applied voltage. 3. Confirm the mechanical stress under actual process and equipment use. 4. Confirm the rated capacitance, rated voltage and other electrical characteristics before assembly. 5. Prior to use, confirm the solderability of capacitors that were in long-term storage. 6. Prior to measuring capacitance, carry out a heat treatment for capacitors that were in long-term storage. 7. The use of Sn-Zn based solder will deteriorate the reliability of the MLCC. Please contact our sales representative or product engineers on the use of Sn-Zn based solder in advance. 3. Maintenance of the Mounting (pick and place) Machine [Incorrect] Deflection High Frequency GQM Series Board Guide [Correct] Support Pin For Bonding GMD Series Continued on the following page. Monolithic Microchip GMA Series Board High-Q Type GJM Series Suction Nozzle Product Information !Caution 1. Make sure that the following excessive forces are not applied to the capacitors. 1-1. In mounting the capacitors on the printed circuit board, any bending force against them shall be kept to a minimum to prevent them from any bending damage or cracking. Please take into account the following precautions and recommendations for use in your process. (1) Adjust the lowest position of the pickup nozzle so as not to bend the printed circuit board. (2) Adjust the nozzle pressure within a static load of 1N to 3N during mounting. 2. Dirt particles and dust accumulated between the suction nozzle and the cylinder inner wall prevent the nozzle from moving smoothly. This imposes greater force upon the chip during mounting, causing cracked chips. Also, the locating claw, when worn out, imposes uneven forces on the chip when positioning, causing cracked chips. The suction nozzle and the locating claw must be maintained, checked and replaced periodically. 123 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution Continued from the preceding page. 4-1. Reflow Soldering For General Purpose GRM Series Capacitor Array GNM Series Low ESL LLp Series 1. When sudden heat is applied to the components, the mechanical strength of the components will decrease because a sudden temperature change causes deformation inside the components. In order to prevent mechanical damage to the components, preheating is required for both the components and the PCB board. Preheating conditions are shown in table 1. It is required to keep the temperature differential between the solder and the component's surface (ΔT) as small as possible. 2. Solderability of tin plating termination chips might be deteriorated when a low temperature soldering profile where the peak solder temperature is below the melting point of tin is used. Please confirm the solderability of tin plated termination chips before use. 3. When components are immersed in solvent after mounting, be sure to maintain the temperature difference (ΔT) between the component and the solvent within the range shown in the table 1. [Standard Conditions for Reflow Soldering] Infrared Reflow Temperature (D) Soldering Peak Temperature Gradual Cooling 200°C ΔT 170°C 150°C 130°C Preheating Time 60-120 seconds 30-60 seconds Vapor Reflow Temperature (D) Soldering Peak Temperature Gradual Cooling ΔT 170°C 150°C 130°C Table 1 Part Number Temperature Differential Preheating GRM02/03/15/18/21/31 GJM02/03/15 High-Q Type GJM Series ΔTV190°C LLL15/18/21/31 60-120 seconds LLR18 Time 20 seconds max. GQM18/21 GRM32/43/55 [Allowable Reflow Soldering Temperature and Time] ΔTV130°C LLM21/31 High Frequency GQM Series GNM GQM22 Recommended Conditions Pb-Sn Solder Infrared Reflow Vapor Reflow Lead Free Solder Monolithic Microchip GMA Series Peak Temperature 230 to 250°C 230 to 240°C 240 to 260°C Atmosphere Air Air Air or N2 Soldering Temperature (D) LLA18/21/31 280 270 260 250 240 230 220 0 30 60 90 120 Soldering Time (sec.) In the case of repeated soldering, the accumulated soldering time must be within the range shown above. Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu For Bonding GMD Series Product Information !Caution 4. Optimum Solder Amount for Reflow Soldering 4-1. Overly thick application of solder paste results in a excessive solder fillet height. This makes the chip more susceptible to mechanical and thermal stress on the board and may cause the chips to crack. 4-2. Too little solder paste results in a lack of adhesive strength on the outer electrode, which may result in chips breaking loose from the PCB. 4-3. Make sure the solder has been applied smoothly to the end surface to a height of 0.2mm* min. 0.2mm∗ min. ∗ GRM02/03: 1/3 of Chip Thickness min. in section Inverting the PCB Make sure not to impose any abnormal mechanical shocks to the PCB. Continued on the following page. 124 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution Continued from the preceding page. 4-2. Flow Soldering Temperature (D) Soldering Soldering Peak Temperature Gradual Cooling ΔT Preheating Peak Temperature 30-90 seconds Capacitor Array GNM Series Preheating Time 5 seconds max. [Allowable Flow Soldering Temperature and Time] 280 270 Low ESL LLp Series 260 250 240 230 220 0 10 Table 2 20 30 40 Soldering Time (sec.) Temperature Differential In the case of repeated soldering, the accumulated soldering time must be within the range shown above. GRM18/21/31 ΔTV150°C LLL21/31 High-Q Type GJM Series Part Number For General Purpose GRM Series [Standard Conditions for Flow Soldering] Soldering Temperature (D) 1. When sudden heat is applied to the components, the mechanical strength of the components will decrease because a sudden temperature change causes deformation inside the components. In order to prevent mechanical damage in the components, preheating should be required for both of the components and the PCB board. Preheating conditions are shown in table 2. It is required to keep the temperature differential between the solder and the component's surface (ΔT) as small as possible. 2. Excessively long soldering time or high soldering temperature can result in leaching of the outer electrodes, causing poor adhesion or a reduction in capacitance value due to loss of contact between electrodes and end termination. 3. When components are immersed in solvent after mounting, be sure to maintain the temperature difference (ΔT) between the component and solvent within the range shown in the table 2. 4. Do not apply flow soldering to chips not listed in table 2. GQM18/21 100 to 120°C Soldering Peak Temperature 240 to 250°C 250 to 260°C Atmosphere Air N2 Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu 5. Optimum Solder Amount for Flow Soldering 5-1. The top of the solder fillet should be lower than the thickness of components. If the solder amount is excessive, the risk of cracking is higher during board bending or any other stressful condition. Up to Chip Thickness Monolithic Microchip GMA Series Lead Free Solder 90 to 110°C Adhesive in section Product Information !Caution Continued on the following page. For Bonding GMD Series Pb-Sn Solder Preheating Peak Temperature High Frequency GQM Series Recommended Conditions 125 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution Continued from the preceding page. 4-3. Correction with a Soldering Iron For General Purpose GRM Series Capacitor Array GNM Series Low ESL LLp Series High-Q Type GJM Series High Frequency GQM Series Monolithic Microchip GMA Series 1. When sudden heat is applied to the components when using a soldering iron, the mechanical strength of the components will decrease because the extreme temperature change can cause deformations inside the components. In order to prevent mechanical damage to the components, preheating is required for both the components and the PCB board. Preheating conditions (The "Temperature of the Soldering Iron Tip", "Preheating Temperature," "Temperature Differential" between the iron tip and the components and the PCB), should be within the conditions of table 3. It is required to keep the temperature differential between the soldering iron and the component surfaces (ΔT) as small as possible. 2. After soldering, do not allow the component/PCB to cool down rapidly. 3. The operating time for the re-working should be as short as possible. When re-working time is too long, it may cause solder leaching, in turn causing a reduction in the adhesive strength of the terminations. 4. Optimum solder amount when re-working with a soldering iron 4-1. For sizes smaller than 0603, (GRM03/15/18, GJM03/15, GQM18), the top of the solder fillet should be lower than 2/3 of the thickness of the component or 0.5mm whichever is smaller. For 0805 and larger sizes, (GRM21/31/32/43/55, GQM21/22), the top of the solder fillet should be lower than 2/3 of the thickness of the component. If the solder amount is excessive, the risk of cracking is higher during board bending or under any other stressful condition. 4-2. A soldering iron with a tip of ø3mm or smaller should be used. It is also necessary to keep the soldering iron from touching the components during the re-work. 4-3. Solder wire with ø0.5mm or smaller is required for soldering. Table 3 Part Number Temperature Preheating Temperature of Soldering Differential Atmosphere Iron Tip Temperature (ΔT) GRM03/15/18/21/31 GJM03/15 350°C max. 150°C min. ΔTV190°C Air 280°C max. 150°C min. ΔTV130°C Air GQM18/21 GRM32/43/55 GQM22 *Applicable for both Pb-Sn and Lead Free Solder. Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu Solder Amount in section 4-4. Leaded Component Insertion For Bonding GMD Series 1. If the PCB is flexed when leaded components (such as transformers and ICs) are being mounted, chips may crack and solder joints may break. Before mounting leaded components, support the PCB using backup pins or special jigs to prevent warping. 5. Washing Product Information !Caution Excessive ultrasonic oscillation during cleaning can cause the PCBs to resonate, resulting in cracked chips or broken solder joints. Take note not to vibrate PCBs. Continued on the following page. 126 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution Continued from the preceding page. [Not Recommended] Peeling Test-pin Support Pin Test-pin [Bending] High-Q Type GJM Series 1. After mounting a capacitor on a printed circuit board, do not apply any stress to the capacitor that is caused by bending or twisting the board. 1-1. In cropping the board, the stress as shown at right may cause the capacitor to crack. Try not to apply this type of stress to a capacitor. Low ESL LLp Series 7. Printed Circuit Board Cropping [Outline of Jig] Printed Circuit Board Direction of Load V-groove For Bonding GMD Series Board Cropping Jig Recommended Printed Circuit Board Monolithic Microchip GMA Series High Frequency GQM Series [Twisting] 2. Ascertain of the cropping method for the printed circuit board in advance. 2-1. Printed circuit board cropping shall be carried out by using a jig or an apparatus to prevent the mechanical stress that can occur to the board. (1) Example of a suitable jig Recommended example: the board should be pushed as close to the cropping jig as possible and from the back side of board in order to minimize the compressive stress applied to the capacitor. Not recommended example: when the board is pushed at a point far from the cropping jig and from the front side of board as below, the capacitor may form a crack caused by the tensile stress applied to capacitor. Not recommended Direction of Load Load Point Components Load Point Capacitor Array GNM Series [Recommended] Printed Circuit Board Components Continued on the following page. 127 Product Information !Caution 1. Confirm position of the support pin or specific jig, when inspecting the electrical performance of a capacitor after mounting on the printed circuit board. 1-1. Avoid bending the printed circuit board by the pressure of a test pin, etc. The thrusting force of the test probe can flex the PCB, resulting in cracked chips or open solder joints. Provide support pins on the back side of the PCB to prevent warping or flexing. 1-2. Avoid vibration of the board by shock when a test pin contacts a printed circuit board. For General Purpose GRM Series 6. Electrical Test on Printed Circuit Board C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution Continued from the preceding page. For General Purpose GRM Series (2) Example of a suitable machine An outline of a printed circuit board cropping machine is shown as follows. Along the lines with the V-grooves on the printed circuit board, the top and bottom blades are aligned to one another when cropping the board. The misalignment of the position between top and bottom blades may cause the capacitor to crack. [Outline of Machine] Top Blade Printed Circuit Board Top Blade [Principle of Operation] Capacitor Array GNM Series Bottom Blade V-groove [Cross-section Diagram] Printed Circuit Board V-groove Low ESL LLp Series Recommended Not Recommended Top-bottom Misalignment Left-right Misalignment Front-rear Misalignment High-Q Type GJM Series Top Blade Top Blade Top Blade Top Blade Bottom Blade Bottom Blade Bottom Blade Bottom Blade c Others High Frequency GQM Series Monolithic Microchip GMA Series For Bonding GMD Series Product Information !Caution 1. Under Operation of Equipment 1-1. Do not touch a capacitor directly with bare hands during operation in order to avoid the danger of an electric shock. 1-2. Do not allow the terminals of a capacitor to come in contact with any conductive objects (short-circuit). Do not expose a capacitor to a conductive liquid, including any acid or alkali solutions. 1-3. Confirm the environment in which the equipment will operate is under the specified conditions. Do not use the equipment under the following environments. (1) Being spattered with water or oil. (2) Being exposed to direct sunlight. (3) Being exposed to Ozone, ultraviolet rays or radiation. (4) Being exposed to toxic gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas, etc.) (5) Any vibrations or mechanical shocks exceeding the specified limits. (6) Moisture condensing environments. 1-4. Use damp proof countermeasures if using under any conditions that can cause condensation. 2. Others 2-1. In an Emergency (1) If the equipment should generate smoke, fire or smell, immediately turn off or unplug the equipment. 128 If the equipment is not turned off or unplugged, the hazards may be worsened by supplying continuous power. (2) In this type of situation, do not allow face and hands to come in contact with the capacitor or burns may be caused by the capacitor's high temperature. 2-2. Disposal of Waste When capacitors are disposed, they must be burned or buried by an industrial waste vendor with the appropriate licenses. 2-3. Circuit Design GRM, GCM, GMA/D, LLL/A/M, GQM, GJM, GNM Series capacitors in this catalog are not safety certified products. 2-4. Remarks Failure to follow the cautions may result, worst case, in a short circuit and smoking when the product is used. The above notices are for standard applications and conditions. Contact us when the products are used in special mounting conditions. Select optimum conditions for operation as they determine the reliability of the product after assembly. The data herein are given in typical values, not guaranteed ratings. C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Notice 1. PCB Design 1. Notice for Pattern Forms 1-1. Unlike leaded components, chip components are susceptible to flexing stresses since they are mounted directly on the substrate. They are also more sensitive to mechanical and thermal stresses than leaded components. Excess solder fillet height can multiply these stresses and cause chip cracking. When designing substrates, take land patterns and dimensions into consideration to eliminate the possibility of excess solder fillet height. 1-2. There is a possibility of chip crack caused by PCB expansion/contraction with heat. Because stress for chip is different depend on PCB material and structure. Especially metal PCB such as alumina has a greater risk of chip crack because of large difference of thermal expansion coefficient. In case of chip below 0402 size, there is also the same possibility of crack with a single-layered glass epoxy board. Pattern Forms Prohibited Capacitor Array GNM Series Low ESL LLp Series c Soldering and Mounting High-Q Type GJM Series operating environments may deteriorate due to the corrosion of the terminations and the penetration of moisture into the capacitor. 1-2. The same phenomenon as the above may occur when the electrodes or terminals of the capacitor are subject to moisture condensation. 1-3. The deterioration of characteristics and insulation resistance due to the oxidization or corrosion of terminal electrodes may result in breakdown when the capacitor is exposed to corrosive or volatile gases or solvents for long periods of time. 3. Piezo-electric Phenomenon 1. When using high dielectric constant type capacitors in AC or pulse circuits, the capacitor itself vibrates at specific frequencies and noise may be generated. Moreover, when the mechanical vibration or shock is added to the capacitor, noise may occur. High Frequency GQM Series 1. Operating Temperature 1. The operating temperature limit depends on the capacitor. 1-1. Do not apply temperatures exceeding the upper operating temperature. It is necessary to select a capacitor with a suitable rated temperature that will cover the operating temperature range. It is also necessary to consider the temperature distribution in equipment and the seasonal temperature variable factor. 1-2. Consider the self-heating factor of the capacitor. The surface temperature of the capacitor shall be the upper operating temperature or less when including the self-heating factors. 2. Atmosphere Surroundings (gaseous and liquid) 1. Restriction on the operating environment of capacitors. 1-1. Capacitors, when used in the above, unsuitable, For General Purpose GRM Series c Rating Correct Solder (ground) Monolithic Microchip GMA Series Chassis Solder Resist Placing Close to Chassis Electrode Pattern Lead Wire Solder Resist For Bonding GMD Series Placing of Chip Components and Leaded Components Soldering Iron Lead Wire Solder Resist Solder Resist Lateral Mounting Continued on the following page. 129 Product Information Notice Placing of Leaded Components after Chip Component C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Notice Continued from the preceding page. For General Purpose GRM Series 2. Land Dimensions 2-1. A chip capacitor can be cracked due to the stress of PCB bending, etc. if the land area is larger than needed and has an excess amount of solder. Please refer to the land dimensions in table 1 for flow soldering, table 2 for reflow soldering, table 3 for GNM & LLA, and table 4 for LLM. Please confirm the suitable land dimension by evaluating the actual SET / PCB. Chip Capacitor Land c b a Solder Resist Capacitor Array GNM Series Table 1 Flow Soldering Method Dimensions Chip (LgW) a b c GRM18 GQM18 1.6g0.8 0.6 to 1.0 0.8 to 0.9 0.6 to 0.8 GRM21 GQM21 2.0g1.25 1.0 to 1.2 0.9 to 1.0 0.8 to 1.1 GRM31 3.2g1.6 2.2 to 2.6 1.0 to 1.1 1.0 to 1.4 LLL21 1.25g2.0 0.4 to 0.7 0.5 to 0.7 1.4 to 1.8 LLL31 1.6g3.2 0.6 to 1.0 0.8 to 0.9 2.6 to 2.8 Part Number Low ESL LLp Series (in mm) Table 2 Reflow Soldering Method High-Q Type GJM Series Dimensions Chip (LgW) a b c GRM02 GJM02 0.4g0.2 0.16 to 0.2 0.12 to 0.18 0.2 to 0.23 GRM03 GJM03 0.6g0.3 0.2 to 0.3 0.2 to 0.35 0.2 to 0.4 GRM15 GJM15 1.0g0.5 (within ±0.10) 0.3 to 0.5 0.35 to 0.45 0.4 to 0.6 1.0g0.5 (±0.15/±0.20) 0.4 to 0.6 0.40 to 0.50 0.5 to 0.7 GRM18 GQM18 1.6g0.8 (within ±0.10) 0.6 to 0.8 0.6 to 0.7 0.6 to 0.8 1.6g0.8 (±0.15/±0.20) 0.7 to 0.9 0.7 to 0.8 0.8 to 1.0 GQM21 2.0g1.25 1.0 to 1.2 0.6 to 0.7 0.8 to 1.1 2.0g1.25 (within ±1.0) 1.2 0.6 1.25 2.0g1.25 (±0.15) 1.2 0.6 to 0.8 1.2 to 1.4 Part Number High Frequency GQM Series GRM21 Monolithic Microchip GMA Series GRM31 2.0g1.25 (±0.20) 1.0 to 1.4 0.6 to 0.8 1.2 to 1.4 3.2g1.6 (within ±0.20) 1.8 to 2.0 0.9 to 1.2 1.5 to 1.7 For Bonding GMD Series 3.2g1.6 (±0.30) 1.9 to 2.1 1.0 to 1.3 1.7 to 1.9 GRM32 3.2g2.5 2.0 to 2.4 1.0 to 1.2 1.8 to 2.3 GRM43 4.5g3.2 3.0 to 3.5 1.2 to 1.4 2.3 to 3.0 GRM55 5.7g5.0 4.0 to 4.6 1.4 to 1.6 3.5 to 4.8 LLL15 0.5g1.0 0.15 to 0.2 0.2 to 0.25 0.7 to 1.0 LLL18 LLR18 0.8g1.6 0.2 to 0.3 0.3 to 0.4 1.4 to 1.6 LLL21 1.25g2.0 0.4 to 0.6 0.4 to 0.5 1.4 to 1.8 LLL31 1.6g3.2 0.6 to 0.8 0.6 to 0.7 2.6 to 2.8 GQM22 2.8g2.8 2.2 to 2.5 0.8 to 1.0 1.9 to 2.3 (in mm) Continued on the following page. Product Information Notice 130 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Notice Continued from the preceding page. GNMpp2 GNMpp4 Chip Capacitor Chip Capacitor a For General Purpose GRM Series LLA a b b c Land p c Land p Capacitor Array GNM Series Table 3 GNM, LLA Series for Reflow Soldering Land Dimensions L W a b c p GNM0M2 0.9 0.6 0.12 to 0.20* 0.35 to 0.40* 0.3 0.45 GNM1M2 1.37 1.0 0.4 to 0.5 0.35 to 0.45 0.3 to 0.35 0.64 GNM212 2.0 1.25 0.6 to 0.7 0.5 to 0.7 0.4 to 0.5 1.0 GNM214 2.0 1.25 0.6 to 0.7 0.5 to 0.7 0.25 to 0.35 0.5 GNM314 3.2 1.6 0.8 to 1.0 0.7 to 0.9 0.3 to 0.4 0.8 LLA18 1.6 0.8 0.3 to 0.4 0.25 to 0.35 0.15 to 0.25 0.4 LLA21 2.0 1.25 0.5 to 0.7 0.35 to 0.6 0.2 to 0.3 0.5 LLA31 3.2 1.6 0.7 to 0.9 0.4 to 0.7 0.3 to 0.4 0.8 Low ESL LLp Series Dimensions (mm) Part Number * 0.82Va+2bV1.00 c High-Q Type GJM Series p LLM b e a Chip Capacitor c' b' f High Frequency GQM Series d Table 4 LLM Series for Reflow Soldering Land Dimensions Dimensions (mm) Part Number a b, b' c, c' d e f p LLM21 0.6 to 0.8 (0.3 to 0.5) 0.3 2.0 to 2.6 1.3 to 1.8 1.4 to 1.6 0.5 LLM31 1.0 (0.3 to 0.5) 0.4 3.2 to 3.6 1.6 to 2.0 2.6 0.8 Monolithic Microchip GMA Series b=(c-e)/2, b'=(d-f)/2 2. Adhesive Application Part Number GRM18, GQM18 a=20 to 70μm b=30 to 35μm c=50 to 105μm a For Bonding GMD Series Chip Capacitor c Board Adhesive Land b Product Information Notice 1. Thin or insufficient adhesive can cause the chips to loosen or become disconnected during flow soldering. The amount of adhesive must be more than dimension c, shown in the drawing at right, to obtain the correct bonding strength. The chip's electrode thickness and land thickness must also be taken into consideration. 2. Low viscosity adhesive can cause chips to slip after mounting. The adhesive must have a viscosity of 5000Pa s s (500ps) min. (at 25°C). 3. Adhesive Coverage Adhesive Coverage* 0.05mg min. GRM21, LLL21, GQM21 0.1mg min. GRM31, LLL31 0.15mg min. *Nominal Value Continued on the following page. 131 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Notice Continued from the preceding page. 3. Adhesive Curing For General Purpose GRM Series 1. Insufficient curing of the adhesive can cause chips to disconnect during flow soldering and deterioration in the insulation resistance between the outer electrodes due to moisture absorption. Control curing temperature and time in order to prevent insufficient hardening. Capacitor Array GNM Series 4. Flux Application Low ESL LLp Series 1. An excessive amount of flux generates a large quantity of flux gas, which can cause a deterioration of solderability, so apply flux thinly and evenly throughout. (A foaming system is generally used for flow soldering.) 2. Flux containing too high a percentage of halide may cause corrosion of the outer electrodes unless there is sufficient cleaning. Use flux with a halide content of 0.2% max. 3. Do not use strong acidic flux. 4. Do not use water-soluble *flux. (*Water-soluble flux can be defined as non-rosin type flux including wash-type flux and non-wash-type flux.) 5. Flow Soldering High-Q Type GJM Series o Set temperature and time to ensure that leaching of the outer electrode does not exceed 25% of the chip end area as a single chip (full length of the edge A-B-C-D shown at right) and 25% of the length A-B shown as mounted on substrate. [As a Single Chip] A B D Outer Electrode C [As Mounted on Substrate] High Frequency GQM Series B A Monolithic Microchip GMA Series 6. Washing For Bonding GMD Series 1. Please evaluate a capacitor using actual cleaning equipment and conditions to confirm the quality and select the applicable solvent. 2. Unsuitable cleaning solvent may leave residual flux or other foreign substances, causing deterioration of electrical characteristics and the reliability of the capacitors. 3. Select the proper cleaning conditions. 3-1. Improper cleaning conditions (excessive or insufficient) may result in the deterioration of the performance of the capacitors. Continued on the following page. Product Information Notice 132 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Notice Continued from the preceding page. Select a resin for which the thermal expansion coefficient is as close to that of the capacitor as possible. A silicone resin can be used as an under-coating to buffer against the stress. 2. Select a resin that is less hygroscopic. Using hygroscopic resins under high humidity conditions may cause the deterioration of the insulation resistance of a capacitor. An epoxy resin can be used as a less hygroscopic resin. Capacitor Array GNM Series 1. A crack may be caused in the capacitor due to the stress of the thermal contraction of the resin during curing process. The stress is affected by the amount of resin and curing contraction. Select a resin with low curing contraction. The difference in the thermal expansion coefficient between a coating resin or a molding resin and the capacitor may cause the destruction and deterioration of the capacitor such as a crack or peeling, and lead to the deterioration of insulation resistance or dielectric breakdown. For General Purpose GRM Series 7. Coating 2. Wire Bonding s 7IRE 'OLD WIRE MICRO M INCH DIAMETER s "ONDING (1) Thermo compression, ultrasonic ball bonding. 2EQUIRED STAGE TEMPERATURE TO # 2EQUIRED WEDGE OR CAPILLARY WEIGHT . TO . (4) Bond the capacitor and base substrate or other devices with gold wire. High-Q Type GJM Series 1. Die Bonding of Capacitors s 5SE THE FOLLOWING MATERIALS FOR THE "RAZING ALLOYS Au-Sn (80/20) 300 to 320 °C in N2 atmosphere s -OUNTING (1) Control the temperature of the substrate so it MATCHES THE TEMPERATURE OF THE BRAZING ALLOY 0LACE THE BRAZING ALLOY ON THE SUBSTRATE AND PLACE the capacitor on the alloy. Hold the capacitor and gently apply the load. Be sure to complete the operation within 1 minute. Low ESL LLp Series 8. Die Bonding/Wire Bonding (GMA or GMD Series) Monolithic Microchip GMA Series For Bonding GMD Series 1-2. Do not apply excessive vibration, shock, and pressure to the capacitor. (1) When excessive mechanical shock or pressure is applied to a capacitor, chipping or cracking may occur in the ceramic body of the capacitor. (2) When the sharp edge of an air driver, a SOLDERING IRON TWEEZERS A CHASSIS ETC impacts strongly on the surface of the capacitor, the capacitor may crack and short-circuit. 1-3. Do not use a capacitor to which excessive shock was applied by dropping, etc. A capacitor dropped accidentally during processing may be damaged. Product Information Notice 1. Transportation 1. The performance of a capacitor may be affected by the conditions during transportation. 1-1. The capacitors shall be protected against excessive temperature, humidity and mechanical force during transportation. (1) Climatic condition s LOW AIR TEMPERATURE # s CHANGE OF TEMPERATURE AIRAIR # # s LOW AIR PRESSURE K0A s CHANGE OF AIR PRESSURE K0AMIN -ECHANICAL CONDITION Transportation shall be done in such a way that the boxes are not deformed and forces are not directly passed on to the inner packaging. High Frequency GQM Series c Others 133 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MEMO 134 C02E.pdf Oct.1,2012 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General Purpose GRM/GRJ/GR3 Series For General Purpose GRM (250Vdc min.)/GRJ/GR3 Series Temperature Compensating Type GRM Series (250Vdc min.) High Dielectric Constant Type GRM Series (250Vdc min.) Soft Termination Type GRJ Series Large Capacitance and High Allowable Ripple Current GR3 Series p136 p143 p148 p153 Only for Applications Chip Monolithic Ceramic Capacitors (Medium Voltage) AC250V Type (Which Meet Japanese Law) GA2 Series p158 p161 p165 p169 Safety Standard Certified GA3 Series UL, IEC60384-14 Class X1/Y2 Type GC IEC60384-14 Class Y2, X1/Y2 Type GF IEC60384-14 Class Y3 Type GD IEC60384-14 Class X2 Type GB Ref Reference Data (Typical Example) Package Pac !Caution/Notice !C p173 p174 p176 p177 p182 p185 p188 Safety Standard Certified GA3 Series For LCD Backlight Inverter Circuit GRM/DC3.15kV Series For Information Devices GR4 Series For Camera Flash Circuit GR7 Series AC250V Type GA2 Series Only for Applications Product Information Contents Oct.1,2012 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors (Medium Voltage) Temperature Compensating Type GRM Series (250Vdc min.) g e c Features Only for Applications 1. Low-loss and suitable for high frequency circuits 2. Murata's original internal electrode structure provides high flash-over voltage. 3. A new monolithic structure for small, surfacemountable devices capable of operating at high voltage levels 4. Sn-plated external electrodes provides good solderability. 5. Use the GRM21/31 type with flow or reflow soldering, and other types with reflow soldering only. T For General Purpose GRM/GRJ/GR3 Series e L W Dimensions (mm) Part Number L W T e min. g min. 1.0 +0,- 0.3 GRM21A 0.7 2.0 ±0.2 1.25 ±0.2 1.25 ±0.2 GRM21B 1.0 +0,- 0.3 GRM31A 1.6 ±0.2 1.25 +0,- 0.3 GRM31B 3.2 ±0.2 GRM31C 1.6 ±0.2 1.5* 1.0 +0,- 0.3 GRM32A 1.25 +0,- 0.3 GRM32B 2.5 ±0.2 0.3 3.2 ±0.2 GRM32Q 1.5 +0,- 0.3 GRM32D 2.0 +0,- 0.3 1.0 +0,- 0.3 2.0 ±0.2 2.9 GRM42A 4.5 ±0.3 GRM43Q 1.5 +0,- 0.3 4.5 ±0.4 3.2 ±0.3 2.2 GRM43D 2.0 +0,- 0.3 GRM55Q 1.5 +0,- 0.3 5.7 ±0.4 5.0 ±0.4 3.2 GRM55D 2.0 +0,- 0.3 * GRM31A7U3D, GRM32A7U3D, GRM32B7U3D: 1.8mm min. AC250V Type GA2 Series c Applications Ideal for use on high frequency pulse circuits such as snubber circuits for switching power supplies, DC-DC converters, ballasts (inverter fluorescent lamps), etc. Safety Standard Certified GA3 Series Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Product Information C0G Characteristics Rated Voltage TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GRM21A5C2E100JW01D 250Vdc C0G (EIA) 10pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E120JW01D 250Vdc C0G (EIA) 12pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E150JW01D 250Vdc C0G (EIA) 15pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E180JW01D 250Vdc C0G (EIA) 18pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E220JW01D 250Vdc C0G (EIA) 22pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E270JW01D 250Vdc C0G (EIA) 27pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E330JW01D 250Vdc C0G (EIA) 33pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E390JW01D 250Vdc C0G (EIA) 39pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E470JW01D 250Vdc C0G (EIA) 47pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E560JW01D 250Vdc C0G (EIA) 56pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E680JW01D 250Vdc C0G (EIA) 68pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E820JW01D 250Vdc C0G (EIA) 82pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E101JW01D 250Vdc C0G (EIA) 100pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E121JW01D 250Vdc C0G (EIA) 120pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E151JW01D 250Vdc C0G (EIA) 150pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E181JW01D 250Vdc C0G (EIA) 180pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E221JW01D 250Vdc C0G (EIA) 220pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E271JW01D 250Vdc C0G (EIA) 270pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A5C2E331JW01D 250Vdc C0G (EIA) 330pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM31A5C2J100JW01D 630Vdc C0G (EIA) 10pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J120JW01D 630Vdc C0G (EIA) 12pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J150JW01D 630Vdc C0G (EIA) 15pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J180JW01D 630Vdc C0G (EIA) 18pF±5% 3.2 1.6 1 1.5mm 0.3mm min. Part Number Continued on the following page. 136 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GRM31A5C2J220JW01D 630Vdc C0G (EIA) 22pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J270JW01D 630Vdc C0G (EIA) 27pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J330JW01D 630Vdc C0G (EIA) 33pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J390JW01D 630Vdc C0G (EIA) 39pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J470JW01D 630Vdc C0G (EIA) 47pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J560JW01D 630Vdc C0G (EIA) 56pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J680JW01D 630Vdc C0G (EIA) 68pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J820JW01D 630Vdc C0G (EIA) 82pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J101JW01D 630Vdc C0G (EIA) 100pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J121JW01D 630Vdc C0G (EIA) 120pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J151JW01D 630Vdc C0G (EIA) 150pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J181JW01D 630Vdc C0G (EIA) 180pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J221JW01D 630Vdc C0G (EIA) 220pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J271JW01D 630Vdc C0G (EIA) 270pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J331JW01D 630Vdc C0G (EIA) 330pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J391JW01D 630Vdc C0G (EIA) 390pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J471JW01D 630Vdc C0G (EIA) 470pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C2J561JW01D 630Vdc C0G (EIA) 560pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31B5C2J681JW01L 630Vdc C0G (EIA) 680pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min. GRM31B5C2J821JW01L 630Vdc C0G (EIA) 820pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min. GRM31B5C2J102JW01L 630Vdc C0G (EIA) 1000pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min. GRM31A5C3A100JW01D 1000Vdc C0G (EIA) 10pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A120JW01D 1000Vdc C0G (EIA) 12pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A150JW01D 1000Vdc C0G (EIA) 15pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A180JW01D 1000Vdc C0G (EIA) 18pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A220JW01D 1000Vdc C0G (EIA) 22pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A270JW01D 1000Vdc C0G (EIA) 27pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A330JW01D 1000Vdc C0G (EIA) 33pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A390JW01D 1000Vdc C0G (EIA) 39pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A470JW01D 1000Vdc C0G (EIA) 47pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A560JW01D 1000Vdc C0G (EIA) 56pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A680JW01D 1000Vdc C0G (EIA) 68pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A820JW01D 1000Vdc C0G (EIA) 82pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A101JW01D 1000Vdc C0G (EIA) 100pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A121JW01D 1000Vdc C0G (EIA) 120pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A151JW01D 1000Vdc C0G (EIA) 150pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A181JW01D 1000Vdc C0G (EIA) 180pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A5C3A221JW01D 1000Vdc C0G (EIA) 220pF±5% 3.2 1.6 1 1.5mm 0.3mm min. Rated Voltage TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GRM21A7U2E101JW31D 250Vdc U2J (EIA) 100pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A7U2E121JW31D 250Vdc U2J (EIA) 120pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A7U2E151JW31D 250Vdc U2J (EIA) 150pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A7U2E181JW31D 250Vdc U2J (EIA) 180pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A7U2E221JW31D 250Vdc U2J (EIA) 220pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A7U2E271JW31D 250Vdc U2J (EIA) 270pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A7U2E331JW31D 250Vdc U2J (EIA) 330pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A7U2E391JW31D 250Vdc U2J (EIA) 390pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A7U2E471JW31D 250Vdc U2J (EIA) 470pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A7U2E561JW31D 250Vdc U2J (EIA) 560pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A7U2E681JW31D 250Vdc U2J (EIA) 680pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A7U2E821JW31D 250Vdc U2J (EIA) 820pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A7U2E102JW31D 250Vdc U2J (EIA) 1000pF±5% 2 1.25 1 0.7mm 0.3mm min. U2J Characteristics Part Number Continued on the following page. 137 Only for Applications Length L (mm) AC250V Type GA2 Series Capacitance Safety Standard Certified GA3 Series TC Code (Standard) Product Information Rated Voltage Part Number For General Purpose GRM/GRJ/GR3 Series Continued from the preceding page. C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Continued from the preceding page. Rated Voltage TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GRM21A7U2E122JW31D 250Vdc U2J (EIA) 1200pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A7U2E152JW31D 250Vdc U2J (EIA) 1500pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21A7U2E182JW31D 250Vdc U2J (EIA) 1800pF±5% 2 1.25 1 0.7mm 0.3mm min. For General Purpose GRM/GRJ/GR3 Series GRM21A7U2E222JW31D 250Vdc U2J (EIA) 2200pF±5% 2 1.25 1 0.7mm 0.3mm min. GRM21B7U2E272JW32L 250Vdc U2J (EIA) 2700pF±5% 2 1.25 1.45 0.7mm 0.3mm min. GRM31A7U2E272JW31D 250Vdc U2J (EIA) 2700pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM21B7U2E332JW32L 250Vdc U2J (EIA) 3300pF±5% 2 1.25 1.45 0.7mm 0.3mm min. GRM31A7U2E332JW31D 250Vdc U2J (EIA) 3300pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM21B7U2E392JW32L 250Vdc U2J (EIA) 3900pF±5% 2 1.25 1.45 0.7mm 0.3mm min. GRM31A7U2E392JW31D 250Vdc U2J (EIA) 3900pF±5% 3.2 1.6 1 1.5mm 0.3mm min. Only for Applications GRM21B7U2E472JW32L 250Vdc U2J (EIA) 4700pF±5% 2 1.25 1.45 0.7mm 0.3mm min. GRM31A7U2E472JW31D 250Vdc U2J (EIA) 4700pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM21B7U2E562JW32L 250Vdc U2J (EIA) 5600pF±5% 2 1.25 1.45 0.7mm 0.3mm min. GRM31A7U2E562JW31D 250Vdc U2J (EIA) 5600pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31B7U2E682JW31L 250Vdc U2J (EIA) 6800pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min. GRM31B7U2E822JW31L 250Vdc U2J (EIA) 8200pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min. GRM31B7U2E103JW31L 250Vdc U2J (EIA) 10000pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min. GRM31A7U2J100JW31D 630Vdc U2J (EIA) 10pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J120JW31D 630Vdc U2J (EIA) 12pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J150JW31D 630Vdc U2J (EIA) 15pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J180JW31D 630Vdc U2J (EIA) 18pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J220JW31D 630Vdc U2J (EIA) 22pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J270JW31D 630Vdc U2J (EIA) 27pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J330JW31D 630Vdc U2J (EIA) 33pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J390JW31D 630Vdc U2J (EIA) 39pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J470JW31D 630Vdc U2J (EIA) 47pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J560JW31D 630Vdc U2J (EIA) 56pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J680JW31D 630Vdc U2J (EIA) 68pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J820JW31D 630Vdc U2J (EIA) 82pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J101JW31D 630Vdc U2J (EIA) 100pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J121JW31D 630Vdc U2J (EIA) 120pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J151JW31D 630Vdc U2J (EIA) 150pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J181JW31D 630Vdc U2J (EIA) 180pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J221JW31D 630Vdc U2J (EIA) 220pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J271JW31D 630Vdc U2J (EIA) 270pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J331JW31D 630Vdc U2J (EIA) 330pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J391JW31D 630Vdc U2J (EIA) 390pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J471JW31D 630Vdc U2J (EIA) 470pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J561JW31D 630Vdc U2J (EIA) 560pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J681JW31D 630Vdc U2J (EIA) 680pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J821JW31D 630Vdc U2J (EIA) 820pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J102JW31D 630Vdc U2J (EIA) 1000pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U2J122JW31D 630Vdc U2J (EIA) 1200pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM32A7U2J122JW31D 630Vdc U2J (EIA) 1200pF±5% 3.2 2.5 1 1.5mm 0.3mm min. GRM31A7U2J152JW31D 630Vdc U2J (EIA) 1500pF±5% 3.2 1.6 1 1.5mm 0.3mm min. Part Number AC250V Type GA2 Series Safety Standard Certified GA3 Series Product Information GRM32A7U2J152JW31D 630Vdc U2J (EIA) 1500pF±5% 3.2 2.5 1 1.5mm 0.3mm min. GRM31A7U2J182JW31D 630Vdc U2J (EIA) 1800pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM32A7U2J182JW31D 630Vdc U2J (EIA) 1800pF±5% 3.2 2.5 1 1.5mm 0.3mm min. GRM31A7U2J222JW31D 630Vdc U2J (EIA) 2200pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM32A7U2J222JW31D 630Vdc U2J (EIA) 2200pF±5% 3.2 2.5 1 1.5mm 0.3mm min. GRM31B7U2J272JW31L 630Vdc U2J (EIA) 2700pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min. GRM31B7U2J332JW31L 630Vdc U2J (EIA) 3300pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min. GRM31C7U2J392JW32L 630Vdc U2J (EIA) 3900pF±5% 3.2 1.6 1.8 1.5mm 0.3mm min. GRM31C7U2J472JW32L 630Vdc U2J (EIA) 4700pF±5% 3.2 1.6 1.8 1.5mm 0.3mm min. GRM32B7U2J562JW31L 630Vdc U2J (EIA) 5600pF±5% 3.2 2.5 1.25 1.5mm 0.3mm min. GRM32Q7U2J682JW31L 630Vdc U2J (EIA) 6800pF±5% 3.2 2.5 1.5 1.5mm 0.3mm min. GRM32D7U2J822JW31L 630Vdc U2J (EIA) 8200pF±5% 3.2 2.5 2 1.5mm 0.3mm min. Continued on the following page. 138 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 2 1.5mm 0.3mm min. 3.2 1.5 2.2mm 0.3mm min. 4.5 3.2 2 2.2mm 0.3mm min. 4.5 3.2 2 2.2mm 0.3mm min. 22000pF±5% 4.5 3.2 2 2.2mm 0.3mm min. U2J (EIA) 27000pF±5% 5.7 5.0 1.5 3.2mm 0.3mm min. 630Vdc U2J (EIA) 33000pF±5% 5.7 5.0 2 3.2mm 0.3mm min. 630Vdc U2J (EIA) 39000pF±5% 5.7 5.0 2 3.2mm 0.3mm min. Width W (mm) GRM32D7U2J103JW31L 630Vdc U2J (EIA) 10000pF±5% 3.2 GRM43Q7U2J123JW31L 630Vdc U2J (EIA) 12000pF±5% 4.5 GRM43D7U2J153JW31L 630Vdc U2J (EIA) 15000pF±5% GRM43D7U2J183JW31L 630Vdc U2J (EIA) 18000pF±5% GRM43D7U2J223JW31L 630Vdc U2J (EIA) GRM55Q7U2J273JW31L 630Vdc GRM55D7U2J333JW31L GRM55D7U2J393JW31L GRM55D7U2J473JW31L 630Vdc U2J (EIA) 47000pF±5% 5.7 5.0 2 3.2mm 0.3mm min. GRM31A7U3A100JW31D 1000Vdc U2J (EIA) 10pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A120JW31D 1000Vdc U2J (EIA) 12pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A150JW31D 1000Vdc U2J (EIA) 15pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A180JW31D 1000Vdc U2J (EIA) 18pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A220JW31D 1000Vdc U2J (EIA) 22pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A270JW31D 1000Vdc U2J (EIA) 27pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A330JW31D 1000Vdc U2J (EIA) 33pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A390JW31D 1000Vdc U2J (EIA) 39pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A470JW31D 1000Vdc U2J (EIA) 47pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A560JW31D 1000Vdc U2J (EIA) 56pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A680JW31D 1000Vdc U2J (EIA) 68pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A820JW31D 1000Vdc U2J (EIA) 82pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A101JW31D 1000Vdc U2J (EIA) 100pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A121JW31D 1000Vdc U2J (EIA) 120pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A151JW31D 1000Vdc U2J (EIA) 150pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A181JW31D 1000Vdc U2J (EIA) 180pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A221JW31D 1000Vdc U2J (EIA) 220pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A271JW31D 1000Vdc U2J (EIA) 270pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31A7U3A331JW31D 1000Vdc U2J (EIA) 330pF±5% 3.2 1.6 1 1.5mm 0.3mm min. GRM31B7U3A391JW31L 1000Vdc U2J (EIA) 390pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min. GRM31B7U3A471JW31L 1000Vdc U2J (EIA) 470pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min. GRM31B7U3A561JW31L 1000Vdc U2J (EIA) 560pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min. GRM31B7U3A681JW31L 1000Vdc U2J (EIA) 680pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min. GRM31C7U3A821JW32L 1000Vdc U2J (EIA) 820pF±5% 3.2 1.6 1.8 1.5mm 0.3mm min. GRM31C7U3A102JW32L 1000Vdc U2J (EIA) 1000pF±5% 3.2 1.6 1.8 1.5mm 0.3mm min. GRM32B7U3A122JW31L 1000Vdc U2J (EIA) 1200pF±5% 3.2 2.5 1.25 1.5mm 0.3mm min. GRM32Q7U3A152JW31L 1000Vdc U2J (EIA) 1500pF±5% 3.2 2.5 1.5 1.5mm 0.3mm min. GRM32D7U3A182JW31L 1000Vdc U2J (EIA) 1800pF±5% 3.2 2.5 2 1.5mm 0.3mm min. GRM32D7U3A222JW31L 1000Vdc U2J (EIA) 2200pF±5% 3.2 2.5 2 1.5mm 0.3mm min. GRM43Q7U3A272JW31L 1000Vdc U2J (EIA) 2700pF±5% 4.5 3.2 1.5 2.2mm 0.3mm min. GRM43Q7U3A332JW31L 1000Vdc U2J (EIA) 3300pF±5% 4.5 3.2 1.5 2.2mm 0.3mm min. GRM43D7U3A392JW31L 1000Vdc U2J (EIA) 3900pF±5% 4.5 3.2 2 2.2mm 0.3mm min. GRM43D7U3A472JW31L 1000Vdc U2J (EIA) 4700pF±5% 4.5 3.2 2 2.2mm 0.3mm min. GRM55Q7U3A562JW31L 1000Vdc U2J (EIA) 5600pF±5% 5.7 5.0 1.5 3.2mm 0.3mm min. GRM55Q7U3A682JW31L 1000Vdc U2J (EIA) 6800pF±5% 5.7 5.0 1.5 3.2mm 0.3mm min. GRM55D7U3A822JW31L 1000Vdc U2J (EIA) 8200pF±5% 5.7 5.0 2 3.2mm 0.3mm min. 0.3mm min. GRM55D7U3A103JW31L 1000Vdc U2J (EIA) 10000pF±5% 5.7 5.0 2 3.2mm GRM31A7U3D100JW31D 2000Vdc U2J (EIA) 10pF±5% 3.2 1.6 1 1.8mm 0.3mm min. GRM31A7U3D120JW31D 2000Vdc U2J (EIA) 12pF±5% 3.2 1.6 1 1.8mm 0.3mm min. GRM31A7U3D150JW31D 2000Vdc U2J (EIA) 15pF±5% 3.2 1.6 1 1.8mm 0.3mm min. GRM31A7U3D180JW31D 2000Vdc U2J (EIA) 18pF±5% 3.2 1.6 1 1.8mm 0.3mm min. GRM31A7U3D220JW31D 2000Vdc U2J (EIA) 22pF±5% 3.2 1.6 1 1.8mm 0.3mm min. GRM31A7U3D270JW31D 2000Vdc U2J (EIA) 27pF±5% 3.2 1.6 1 1.8mm 0.3mm min. GRM31A7U3D330JW31D 2000Vdc U2J (EIA) 33pF±5% 3.2 1.6 1 1.8mm 0.3mm min. GRM31A7U3D390JW31D 2000Vdc U2J (EIA) 39pF±5% 3.2 1.6 1 1.8mm 0.3mm min. GRM31A7U3D470JW31D 2000Vdc U2J (EIA) 47pF±5% 3.2 1.6 1 1.8mm 0.3mm min. GRM31A7U3D560JW31D 2000Vdc U2J (EIA) 56pF±5% 3.2 1.6 1 1.8mm 0.3mm min. GRM31A7U3D680JW31D 2000Vdc U2J (EIA) 68pF±5% 3.2 1.6 1 1.8mm 0.3mm min. Continued on the following page. 139 Only for Applications 2.5 Length L (mm) AC250V Type GA2 Series Electrode e Capacitance Safety Standard Certified GA3 Series Electrode g min. TC Code (Standard) Product Information Thickness T max. (mm) Rated Voltage Part Number For General Purpose GRM/GRJ/GR3 Series Continued from the preceding page. C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Continued from the preceding page. Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e U2J (EIA) 82pF±5% 3.2 2.5 1 1.8mm 0.3mm min. U2J (EIA) 100pF±5% 3.2 2.5 1 1.8mm 0.3mm min. 2000Vdc U2J (EIA) 120pF±5% 3.2 2.5 1 1.8mm 0.3mm min. For General Purpose GRM/GRJ/GR3 Series GRM32A7U3D151JW31D 2000Vdc U2J (EIA) 150pF±5% 3.2 2.5 1 1.8mm 0.3mm min. GRM32B7U3D181JW31L 2000Vdc U2J (EIA) 180pF±5% 3.2 2.5 1.25 1.8mm 0.3mm min. GRM32B7U3D221JW31L 2000Vdc U2J (EIA) 220pF±5% 3.2 2.5 1.25 1.8mm 0.3mm min. GRM42A7U3F270JW31L 3150Vdc U2J (EIA) 27pF±5% 4.5 2.0 1 2.9mm 0.3mm min. GRM42A7U3F330JW31L 3150Vdc U2J (EIA) 33pF±5% 4.5 2.0 1 2.9mm 0.3mm min. GRM42A7U3F390JW31L 3150Vdc U2J (EIA) 39pF±5% 4.5 2.0 1 2.9mm 0.3mm min. GRM42A7U3F470JW31L 3150Vdc U2J (EIA) 47pF±5% 4.5 2.0 1 2.9mm 0.3mm min. Only for Applications GRM42A7U3F560JW31L 3150Vdc U2J (EIA) 56pF±5% 4.5 2.0 1 2.9mm 0.3mm min. GRM42A7U3F680JW31L 3150Vdc U2J (EIA) 68pF±5% 4.5 2.0 1 2.9mm 0.3mm min. GRM42A7U3F820JW31L 3150Vdc U2J (EIA) 82pF±5% 4.5 2.0 1 2.9mm 0.3mm min. GRM42A7U3F101JW31L 3150Vdc U2J (EIA) 100pF±5% 4.5 2.0 1 2.9mm 0.3mm min. Rated Voltage TC Code (Standard) GRM32A7U3D820JW31D 2000Vdc GRM32A7U3D101JW31D 2000Vdc GRM32A7U3D121JW31D Part Number AC250V Type GA2 Series Safety Standard Certified GA3 Series Product Information 140 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Specifications and Test Methods Operating Temperature Range –55 to +125°C 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimension Using calipers and micrometers – No failure should be observed when voltage in the Table is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50mA. 4 Dielectric Strength No defects or abnormalities 5 Insulation Resistance (I.R.) More than 10,000MΩ 6 Capacitance Within the specified tolerance 7 Q 1,000 min. Capacitance Temperature Characteristics Temp. Coefficient C0G char. : 0±30ppm/°C (Temp. Range : +25 to +125°C) 0+30, –72ppm/°C (Temp. Range : –55 to +25°C) U2J char. : –750±120ppm/°C (Temp. Range : +25 to +125°C) –750+120, –347ppm/°C (Temp. Range : –55 to +25°C) 8 9 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Rated Voltage DC250V DC630V DC1kV, DC2kV, DC3.15kV Test Voltage 200% of the rated voltage 150% of the rated voltage 130% of the rated voltage The insulation resistance should be measured with DC500±50V (DC250±25V in case of rated voltage: DC250V) and within 60±5 sec. of charging. The capacitance/Q should be measured at the frequency and voltage shown as follows. Capacitance CF1,000pF CU1,000pF Frequency 1±0.2MHz 1±0.2kHz Voltage AC0.5 to 5V(r.m.s.) AC1±0.2V(r.m.s.) The capacitance measurement should be made at each step specified in the Table. Step 1 2 3 4 5 Temperature (°C) 25±2 Min. Operating Temp.±3 25±2 Max. Operating Temp.±2 25±2 Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10±1s Glass Epoxy Board Fig. 1 10 Appearance No defects or abnormalities Capacitance Within the specified tolerance Q 1,000 min. Vibration Resistance Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Solder resist Cu Glass Epoxy Board Continued on the following page. 141 Only for Applications 1 For General Purpose GRM/GRJ/GR3 Series Test Method AC250V Type GA2 Series Specifications Safety Standard Certified GA3 Series Item Product Information No. C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Specifications and Test Methods Continued from the preceding page. No. -«iVvV>Ìà Item /iÃÌÊiÌ ` Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. b ø4.5 d c 40 For General Purpose GRM/GRJ/GR3 Series No marking defects a 100 11 Deflection Only for Applications AC250V Type GA2 Series Solderability of Termination a 1.2 2.2 2.2 3.5 3.5 4.5 iÃÊ® b c 4.0 1.65 5.0 2.0 5.0 2.9 7.0 2.4 7.0 3.7 8.0 5.6 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects Capacitance Change Within ±2.5% Safety Standard Certified GA3 Series ,iÃÃÌ>ViÊ 13 to Soldering Q Heat I.R. Product Information 14 20 50 Pressurizing speed: 1.0mm/s Pressurize Fig. 2 LZW (mm) 2.0Z1.25 3.2Z1.6 3.2Z2.5 4.5Z2.0 4.5Z3.2 5.7Z5.0 12 t : 1.6 R230 d Flexure=1 Capacitance meter 45 (in mm) 45 1.0 Fig. 3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2±0.5 sec. Immersing speed: 25±2.5mm/s Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235±5°C H60A or H63A Eutectic Solder Preheat the capacitor at 120 to 150°C* for 1 min. Immerse the capacitor in solder solution at 260±5°C for 10±1 sec. Let sit at room condition* for 24±2 hrs., then measure. UiÀÃ}Êëii`: 25±2.5mm/s 1,000 min. More than 10,000MΩ Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within ±2.5% Q 500 min. I.R. More than 10,000MΩ Dielectric Strength In accordance with item No.4 Temperature Cycle *Preheating for more than 3.2Z2.5mm Step 1 2 Temperature 100 to 120°C 170 to 200°C Time 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24±2 hrs. at room condition,* then measure. Step 1 2 3 4 Temperature (°C) Min. Operating Temp.±3 Room Temp. Max. Operating Temp.±2 Room Temp. Time (min.) 30±3 2 to 3 30±3 2 to 3 Solder resist Cu Glass Epoxy Board Fig. 4 Humidity 15 (Steady State) 16 Life Appearance No marking defects Capacitance Change Within ±5.0% Q 350 min. I.R. More than 1,000MΩ Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within ±3.0% Q 350 min. I.R. More than 1,000MΩ Dielectric Strength In accordance with item No.4 Let the capacitor sit at 40±2°C and relative humidity of 90 to 95% for 500W24 Y 0 hrs. Remove and let sit for 24±2 hrs. at room condition,* then measure. Apply voltage as in Table for 1,000W48 Y 0hrs. at maximum operating temperature ±3°C. Remove and let sit for 24±2 hrs. at room condition,* then measure. Rated Voltage DC250V DC630V, DC1kV, DC2kV, DC3.15kV 120% of the rated voltage The charge/discharge current is less than 50mA. * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 142 Applied Voltage 150% of the rated voltage C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors (Medium Voltage) g e c Features T 1. A new monolithic structure for small, high capacitance capable of operating at high voltage levels. 2. Sn-plated external electrodes provide good solderability. 3. Use the GRM18/21/31 types with flow or reflow soldering, and other types with reflow soldering only. L Part Number GRM188 GRM21A GRM21B GRM31B GRM31C GRM32Q GRM32D GRM43Q GRM43D GRM55D c Applications L W Dimensions (mm) W T 1.6 ±0.1 0.8 ±0.1 2.0 ±0.2 1.25 ±0.2 3.2 ±0.2 1.6 ±0.2 3.2 ±0.3 2.5 ±0.2 4.5 ±0.4 3.2 ±0.3 5.7 ±0.4 5.0 ±0.4 g min. e 0.2 to 0.5 0.8 ±0.1 1.0 +0,-0.3 1.25 ±0.2 1.25 +0,-0.3 1.6 ±0.2 1.5 +0,-0.3 0.3 min. 2.0 +0,-0.3 1.5 +0,-0.3 2.0 +0,-0.3 2.0 +0,-0.3 0.4 0.7 1.2 2.2 3.2 AC250V Type GA2 Series 1. Ideal for use on clamp-snubber circuits for switching power supplies. 2. Ideal for use as primary-secondary coupling for DC-DC converters. 3. Ideal for use on line filters and ringer detectors for telephones, facsimiles and modems. Only for Applications e For General Purpose GRM/GRJ/GR3 Series High Dielectric Constant Type GRM Series (250Vdc min.) Part Number Rated Voltage TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GRM188R72E221KW07D 250Vdc X7R (EIA) 220pF±10% 1.6 0.8 0.9 0.4mm 0.2 to 0.5mm GRM188R72E331KW07D 250Vdc X7R (EIA) 330pF±10% 1.6 0.8 0.9 0.4mm 0.2 to 0.5mm GRM188R72E471KW07D 250Vdc X7R (EIA) 470pF±10% 1.6 0.8 0.9 0.4mm 0.2 to 0.5mm GRM188R72E681KW07D 250Vdc X7R (EIA) 680pF±10% 1.6 0.8 0.9 0.4mm 0.2 to 0.5mm GRM188R72E102KW07D 250Vdc X7R (EIA) 1000pF±10% 1.6 0.8 0.9 0.4mm 0.2 to 0.5mm GRM21AR72E102KW01D 250Vdc X7R (EIA) 1000pF±10% 2 1.25 1 0.7mm 0.3mm min. GRM188R72E152KW07D 250Vdc X7R (EIA) 1500pF±10% 1.6 0.8 0.9 0.4mm 0.2 to 0.5mm GRM21AR72E152KW01D 250Vdc X7R (EIA) 1500pF±10% 2 1.25 1 0.7mm 0.3mm min. GRM188R72E222KW07D 250Vdc X7R (EIA) 2200pF±10% 1.6 0.8 0.9 0.4mm 0.2 to 0.5mm GRM21AR72E222KW01D 250Vdc X7R (EIA) 2200pF±10% 2 1.25 1 0.7mm 0.3mm min. GRM21AR72E332KW01D 250Vdc X7R (EIA) 3300pF±10% 2 1.25 1 0.7mm 0.3mm min. GRM21AR72E472KW01D 250Vdc X7R (EIA) 4700pF±10% 2 1.25 1 0.7mm 0.3mm min. GRM21AR72E682KW01D 250Vdc X7R (EIA) 6800pF±10% 2 1.25 1 0.7mm 0.3mm min. GRM21BR72E103KW03L 250Vdc X7R (EIA) 10000pF±10% 2 1.25 1.45 0.7mm 0.3mm min. GRM31BR72E153KW01L 250Vdc X7R (EIA) 15000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM31BR72E223KW01L 250Vdc X7R (EIA) 22000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM31CR72E333KW03L 250Vdc X7R (EIA) 33000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min. GRM31CR72E473KW03L 250Vdc X7R (EIA) 47000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min. GRM31BR72E683KW01L 250Vdc X7R (EIA) 68000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM32QR72E683KW01L 250Vdc X7R (EIA) 68000pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min. GRM31CR72E104KW03L 250Vdc X7R (EIA) 0.10µF±10% 3.2 1.6 1.8 1.2mm 0.3mm min. GRM32DR72E104KW01L 250Vdc X7R (EIA) 0.10µF±10% 3.2 2.5 2 1.2mm 0.3mm min. GRM32QR72E154KW01L 250Vdc X7R (EIA) 0.15µF±10% 3.2 2.5 1.5 1.2mm 0.3mm min. GRM43QR72E154KW01L 250Vdc X7R (EIA) 0.15µF±10% 4.5 3.2 1.5 2.2mm 0.3mm min. GRM32DR72E224KW01L 250Vdc X7R (EIA) 0.22µF±10% 3.2 2.5 2 1.2mm 0.3mm min. Continued on the following page. 143 Product Information Safety Standard Certified GA3 Series Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Continued from the preceding page. Rated Voltage TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GRM43DR72E224KW01L 250Vdc X7R (EIA) 0.22µF±10% 4.5 3.2 2 2.2mm 0.3mm min. GRM43DR72E334KW01L 250Vdc X7R (EIA) 0.33µF±10% 4.5 3.2 2 2.2mm 0.3mm min. GRM55DR72E334KW01L 250Vdc X7R (EIA) 0.33µF±10% 5.7 5.0 2 3.2mm 0.3mm min. For General Purpose GRM/GRJ/GR3 Series GRM43DR72E474KW01L 250Vdc X7R (EIA) 0.47µF±10% 4.5 3.2 2 2.2mm 0.3mm min. GRM55DR72E474KW01L 250Vdc X7R (EIA) 0.47µF±10% 5.7 5.0 2 3.2mm 0.3mm min. GRM55DR72E684KW01L 250Vdc X7R (EIA) 0.68µF±10% 5.7 5.0 2 3.2mm 0.3mm min. GRM55DR72E105KW01L 250Vdc X7R (EIA) 1.0µF±10% 5.7 5.0 2 3.2mm 0.3mm min. GRM31BR72J102KW01L 630Vdc X7R (EIA) 1000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM31BR72J152KW01L 630Vdc X7R (EIA) 1500pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM31BR72J222KW01L 630Vdc X7R (EIA) 2200pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. Only for Applications GRM31BR72J332KW01L 630Vdc X7R (EIA) 3300pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM31BR72J472KW01L 630Vdc X7R (EIA) 4700pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM31BR72J682KW01L 630Vdc X7R (EIA) 6800pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM31BR72J103KW01L 630Vdc X7R (EIA) 10000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM31CR72J153KW03L 630Vdc X7R (EIA) 15000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min. GRM32QR72J223KW01L 630Vdc X7R (EIA) 22000pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min. GRM32DR72J333KW01L 630Vdc X7R (EIA) 33000pF±10% 3.2 2.5 2 1.2mm 0.3mm min. GRM32DR72J473KW01L 630Vdc X7R (EIA) 47000pF±10% 3.2 2.5 2 1.2mm 0.3mm min. GRM43QR72J683KW01L 630Vdc X7R (EIA) 68000pF±10% 4.5 3.2 1.5 2.2mm 0.3mm min. GRM43DR72J104KW01L 630Vdc X7R (EIA) 0.10µF±10% 4.5 3.2 2 2.2mm 0.3mm min. GRM55DR72J154KW01L 630Vdc X7R (EIA) 0.15µF±10% 5.7 5.0 2 3.2mm 0.3mm min. GRM55DR72J224KW01L 630Vdc X7R (EIA) 0.22µF±10% 5.7 5.0 2 3.2mm 0.3mm min. GRM31BR73A471KW01L 1000Vdc X7R (EIA) 470pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM31BR73A681KW01L 1000Vdc X7R (EIA) 680pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM31BR73A102KW01L 1000Vdc X7R (EIA) 1000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM31BR73A152KW01L 1000Vdc X7R (EIA) 1500pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM31BR73A222KW01L 1000Vdc X7R (EIA) 2200pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM31BR73A332KW01L 1000Vdc X7R (EIA) 3300pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM31BR73A472KW01L 1000Vdc X7R (EIA) 4700pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRM32QR73A682KW01L 1000Vdc X7R (EIA) 6800pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min. GRM32QR73A103KW01L 1000Vdc X7R (EIA) 10000pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min. GRM32DR73A153KW01L 1000Vdc X7R (EIA) 15000pF±10% 3.2 2.5 2 1.2mm 0.3mm min. GRM32DR73A223KW01L 1000Vdc X7R (EIA) 22000pF±10% 3.2 2.5 2 1.2mm 0.3mm min. GRM43DR73A333KW01L 1000Vdc X7R (EIA) 33000pF±10% 4.5 3.2 2 2.2mm 0.3mm min. GRM43DR73A473KW01L 1000Vdc X7R (EIA) 47000pF±10% 4.5 3.2 2 2.2mm 0.3mm min. GRM55DR73A683KW01L 1000Vdc X7R (EIA) 68000pF±10% 5.7 5.0 2 3.2mm 0.3mm min. GRM55DR73A104KW01L 1000Vdc X7R (EIA) 0.10µF±10% 5.7 5.0 2 3.2mm 0.3mm min. AC250V Type GA2 Series Part Number Safety Standard Certified GA3 Series Product Information 144 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Specifications and Test Methods Specifications Test Method 1 Operating Temperature Range –55 to +125°C 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers – 4 Dielectric Strength No defects or abnormalities No failure should be observed when 150% of the rated voltage (200% of the rated voltage in case of rated voltage: DC250V, 120% of the rated voltage in case of rated voltage: DC1kV) is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50mA. 5 Insulation Resistance (I.R.) CU0.01μF: More than 100MΩ s & CF0.01μF: More than 10,000MΩ The insulation resistance should be measured with DC500±50V (DC250±25V in case of rated voltage: DC250V) and within 60±5 sec. of charging. 6 Capacitance Within the specified tolerance 7 Dissipation Factor (D.F.) 0.025 max. The capacitance/D.F. should be measured at a frequency of 1±0.2kHz and a voltage of AC1±0.2V(r.m.s.). For General Purpose GRM/GRJ/GR3 Series Item Only for Applications No. The capacitance measurement should be made at each step specified in the Table. Cap. Change Within ±15% (Temp. Range: –55 to +125°C) AC250V Type GA2 Series Capacitance Temperature Characteristics Temperature (°C) 25±2 Min. Operating Temp.±3 25±2 Max. Operating Temp.±2 25±2 U*ÀiÌÀi>ÌiÌ Perform a heat treatment at 150+0 –10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* 9 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. Safety Standard Certified GA3 Series 8 Step 1 2 3 4 5 Glass Epoxy Board Fig. 1 Appearance No defects or abnormalities Capacitance Within the specified tolerance 10 Vibration Resistance D.F. Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). 0.025 max. Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 145 Product Information 10N (5N : Size 1.6g0.8mm only), 10±1s C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM Series Specifications and Test Methods Continued from the preceding page. ° Ìi -«iVvV>Ìà /iÃÌÊiÌ ` Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. b ø4.5 d c 40 For General Purpose GRM/GRJ/GR3 Series No marking defects a 100 11 iviVÌ 20 50 Pressurizing speed: 1.0mm/s Pressurize t : 1.6 Fig. 2 Only for Applications LZW ® 1.6Z0.8 2.0Z1.25 3.2Z1.6 3.2Z2.5 4.5Z3.2 5.7Z5.0 AC250V Type GA2 Series Safety Standard Certified GA3 Series -`iÀ>LÌÞÊvÊ /iÀ>Ì 12 D.F. ,iÃÃÌ>ViÊ 13 ÌÊ-`iÀ}Ê I.R. i>Ì > 1.0 1.2 2.2 2.2 3.5 4.5 iÃÊ® L V 3.0 1.2 4.0 1.65 5.0 2.0 5.0 2.9 7.0 3.7 8.0 5.6 R230 Capacitance meter 45 >«>VÌ>ViÊ Within ±10% >}i 0.025 max. CU0.01μF: More than 100MΩ s & CF0.01μF: More than 10,000MΩ 45 (in mm) 1.0 75% of the terminations are to be soldered evenly and continuously. ««i>À>Vi No marking defects Flexure=1 ` Fig. 3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2±0.5 sec. Immersing speed: 25±2.5mm/s Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235±5°C H60A or H63A Eutectic Solder Preheat the capacitor at 120 to 150°C* for 1 min. Immerse the capacitor in solder solution at 260±5°C for 10±1 sec. Let sit at room condition* for 24±2 hrs., then measure. UiÀÃ}Êëii`\Ê25±2.5mm/s U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150+ –10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* *Preheating for more than 3.2Z2.5mm iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 ««i>À>Vi No marking defects Product Information >«>VÌ>ViÊ Within ±7.5% >}i 14 D.F. 0.025 max. I.R. CU0.01μF: More than 100MΩ s & CF0.01μF: More than 10,000MΩ /i«iÀ>ÌÕÀiÊ ÞVi -Ìi« 1 2 /i«iÀ>ÌÕÀi 100 to 120°C 170 to 200°C /i 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24±2 hrs. at room condition,* then measure. -Ìi« 1 2 3 4 /i«iÀ>ÌÕÀiÊc ® Min. Operating Temp.±3 Room Temp. Max. Operating Temp.±2 Room Temp. /iÊ°® 30±3 2 to 3 30±3 2 to 3 U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150+ –10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 Solder resist Cu Glass Epoxy Board Fig. 4 ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±15% >}i Õ`ÌÞÊ D.F. 15 -Ìi>`ÞÊ -Ì>Ìi® I.R. iiVÌÀVÊ -ÌÀi}Ì 0.05 max. CU0.01μF: More than 10MΩ s & CF0.01μF: More than 1,000MΩ Let the capacitor sit at 40±2°C and relative humidity of 90 to 95% for 500+24 – 0hrs. Remove and let sit for 24±2 hrs. at room condition,* then measure. U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150+ –10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* In accordance with item No.4 * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 146 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf Oct.1,2012 GRM Series Specifications and Test Methods Continued from the preceding page. -«iVvV>Ìà ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±15% (rated voltage: DC250V, DC630V) >}i Within ±20% (rated voltage: DC1kV) 16 vi D.F. 0.05 max. I.R. CU0.01μF: More than 10MΩ s & CF0.01μF: More than 1,000MΩ iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 /iÃÌÊiÌ ` Apply 120% of the rated voltage (150% of the rated voltage in case of rated voltage: DC250V, 110% of the rated voltage in case +48 of rated voltage: DC1kV) for 1,000– 0hrs. at maximum operating temperature ±3°C. Remove and let sit for 24±2hrs. at room condition,* then measure. The charge/discharge current is less than 50mA. U*ÀiÌÀi>ÌiÌ Apply test voltage for 60±5 min. at test temperature. Remove and let sit for 24±2 hrs. at room condition.* ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±15% >}i D.F. 0.05 max. I.R. CU0.01μF: More than 10MΩ s & CF0.01μF: More than 1,000MΩ iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 Apply the rated voltage at 40±2°C and relative humidity of 90 to +24 95% for 500– 0hrs. Remove and let sit for 24±2 hrs. at room condition,* then measure. U*ÀiÌÀi>ÌiÌ Apply test voltage for 60±5 min. at test temperature. Remove and let sit for 24±2 hrs. at room condition.* AC250V Type GA2 Series Õ`ÌÞÊ >`}Ê ««V>Ì\Ê 17 Óxä6]Ê ÈÎä6Ê Ìi® For General Purpose GRM/GRJ/GR3 Series Ìi Only for Applications No. Product Information Safety Standard Certified GA3 Series * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 147 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors (Medium Voltage) Deflecting crack Soft Termination Type GRJ Series g e c Features Only for Applications 1. Improves endurance against Board Bending Stress. 2. Reduces the board bending stress by the conductive polymer termination. 3. Use the GRJ21/31 types with flow or reflow soldering, and other types with reflow soldering only. T For General Purpose GRM/GRJ/GR3 Series e L Part Number GRJ21A GRJ21B GRJ31B GRJ31C GRJ32Q GRJ32D GRJ43Q GRJ43D GRJ55D c Applications AC250V Type GA2 Series 1. Ideal for use on clamp-snubber circuits for switching power supplies. 2. Ideal for use as primary-secondary coupling for DC-DC converters. 3. Ideal for use on line filters and ringer detectors for telephones, facsimiles and modems. L 2.0 ±0.2 3.2 ±0.2 3.2 ±0.3 4.5 ±0.4 5.7 ±0.4 W Dimensions (mm) e W T 1.0 +0,-0.3 1.25 ±0.2 1.25 ±0.2 1.25 +0,-0.3 1.6 ±0.2 1.6 ±0.2 1.5 +0,-0.3 0.3 min. 2.5 ±0.2 2.0 +0,-0.3 1.5 +0,-0.3 3.2 ±0.3 2.0 +0,-0.3 2.0 +0,-0.3 5.0 ±0.4 g min. 0.7 1.2 2.2 3.2 Safety Standard Certified GA3 Series Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Product Information Rated Voltage TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GRJ21AR72E102KWJ1D 250Vdc X7R (EIA) 1000pF±10% 2 1.25 1 0.7mm 0.3mm min. GRJ21AR72E152KWJ1D 250Vdc X7R (EIA) 1500pF±10% 2 1.25 1 0.7mm 0.3mm min. GRJ21AR72E222KWJ1D 250Vdc X7R (EIA) 2200pF±10% 2 1.25 1 0.7mm 0.3mm min. GRJ21AR72E332KWJ1D 250Vdc X7R (EIA) 3300pF±10% 2 1.25 1 0.7mm 0.3mm min. GRJ21AR72E472KWJ1D 250Vdc X7R (EIA) 4700pF±10% 2 1.25 1 0.7mm 0.3mm min. GRJ21AR72E682KWJ1D 250Vdc X7R (EIA) 6800pF±10% 2 1.25 1 0.7mm 0.3mm min. GRJ21BR72E103KWJ3L 250Vdc X7R (EIA) 10000pF±10% 2 1.25 1.45 0.7mm 0.3mm min. GRJ21BR72E153KWJ3L 250Vdc X7R (EIA) 15000pF±10% 2 1.25 1.45 0.7mm 0.3mm min. GRJ31BR72E153KWJ1L 250Vdc X7R (EIA) 15000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ21BR72E223KWJ3L 250Vdc X7R (EIA) 22000pF±10% 2 1.25 1.45 0.7mm 0.3mm min. GRJ31BR72E223KWJ1L 250Vdc X7R (EIA) 22000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ31CR72E333KWJ3L 250Vdc X7R (EIA) 33000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min. GRJ31CR72E473KWJ3L 250Vdc X7R (EIA) 47000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min. GRJ31BR72E683KWJ1L 250Vdc X7R (EIA) 68000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ32QR72E683KWJ1L 250Vdc X7R (EIA) 68000pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min. GRJ31CR72E104KWJ3L 250Vdc X7R (EIA) 0.10µF±10% 3.2 1.6 1.8 1.2mm 0.3mm min. GRJ32DR72E104KWJ1L 250Vdc X7R (EIA) 0.10µF±10% 3.2 2.5 2 1.2mm 0.3mm min. GRJ32QR72E154KWJ1L 250Vdc X7R (EIA) 0.15µF±10% 3.2 2.5 1.5 1.2mm 0.3mm min. GRJ43QR72E154KWJ1L 250Vdc X7R (EIA) 0.15µF±10% 4.5 3.2 1.5 2.2mm 0.3mm min. GRJ32DR72E224KWJ1L 250Vdc X7R (EIA) 0.22µF±10% 3.2 2.5 2 1.2mm 0.3mm min. GRJ43DR72E224KWJ1L 250Vdc X7R (EIA) 0.22µF±10% 4.5 3.2 2 2.2mm 0.3mm min. GRJ43DR72E334KWJ1L 250Vdc X7R (EIA) 0.33µF±10% 4.5 3.2 2 2.2mm 0.3mm min. GRJ55DR72E334KWJ1L 250Vdc X7R (EIA) 0.33µF±10% 5.7 5 2 3.2mm 0.3mm min. GRJ43DR72E474KWJ1L 250Vdc X7R (EIA) 0.47µF±10% 4.5 3.2 2 2.2mm 0.3mm min. GRJ55DR72E474KWJ1L 250Vdc X7R (EIA) 0.47µF±10% 5.7 5 2 3.2mm 0.3mm min. GRJ55DR72E684KWJ1L 250Vdc X7R (EIA) 0.68µF±10% 5.7 5 2 3.2mm 0.3mm min. GRJ55DR72E105KWJ1L 250Vdc X7R (EIA) 1.0µF±10% 5.7 5 2 3.2mm 0.3mm min. Part Number Continued on the following page. 148 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GRJ31BR72J102KWJ1L 630Vdc X7R (EIA) 1000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ31BR72J152KWJ1L 630Vdc X7R (EIA) 1500pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ31BR72J222KWJ1L 630Vdc X7R (EIA) 2200pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ31BR72J332KWJ1L 630Vdc X7R (EIA) 3300pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ31BR72J472KWJ1L 630Vdc X7R (EIA) 4700pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ31BR72J682KWJ1L 630Vdc X7R (EIA) 6800pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ31BR72J103KWJ1L 630Vdc X7R (EIA) 10000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ31CR72J153KWJ3L 630Vdc X7R (EIA) 15000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min. GRJ31CR72J223KWJ3L 630Vdc X7R (EIA) 22000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min. GRJ32QR72J223KWJ1L 630Vdc X7R (EIA) 22000pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min. GRJ32DR72J333KWJ1L 630Vdc X7R (EIA) 33000pF±10% 3.2 2.5 2 1.2mm 0.3mm min. GRJ32DR72J473KWJ1L 630Vdc X7R (EIA) 47000pF±10% 3.2 2.5 2 1.2mm 0.3mm min. GRJ43QR72J683KWJ1L 630Vdc X7R (EIA) 68000pF±10% 4.5 3.2 1.5 2.2mm 0.3mm min. GRJ43DR72J104KWJ1L 630Vdc X7R (EIA) 0.10µF±10% 4.5 3.2 2 2.2mm 0.3mm min. GRJ55DR72J154KWJ1L 630Vdc X7R (EIA) 0.15µF±10% 5.7 5 2 3.2mm 0.3mm min. GRJ55DR72J224KWJ1L 630Vdc X7R (EIA) 0.22µF±10% 5.7 5 2 3.2mm 0.3mm min. GRJ31BR73A471KWJ1L 1000Vdc X7R (EIA) 470pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ31BR73A681KWJ1L 1000Vdc X7R (EIA) 680pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ31BR73A102KWJ1L 1000Vdc X7R (EIA) 1000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ31BR73A152KWJ1L 1000Vdc X7R (EIA) 1500pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ31BR73A222KWJ1L 1000Vdc X7R (EIA) 2200pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ31BR73A332KWJ1L 1000Vdc X7R (EIA) 3300pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ31BR73A472KWJ1L 1000Vdc X7R (EIA) 4700pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GRJ31CR73A682KWJ3L 1000Vdc X7R (EIA) 6800pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min. GRJ32QR73A682KWJ1L 1000Vdc X7R (EIA) 6800pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min. GRJ31CR73A103KWJ3L 1000Vdc X7R (EIA) 10000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min. GRJ32QR73A103KWJ1L 1000Vdc X7R (EIA) 10000pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min. GRJ32DR73A153KWJ1L 1000Vdc X7R (EIA) 15000pF±10% 3.2 2.5 2 1.2mm 0.3mm min. GRJ32DR73A223KWJ1L 1000Vdc X7R (EIA) 22000pF±10% 3.2 2.5 2 1.2mm 0.3mm min. GRJ43DR73A333KWJ1L 1000Vdc X7R (EIA) 33000pF±10% 4.5 3.2 2 2.2mm 0.3mm min. GRJ43DR73A473KWJ1L 1000Vdc X7R (EIA) 47000pF±10% 4.5 3.2 2 2.2mm 0.3mm min. GRJ55DR73A683KWJ1L 1000Vdc X7R (EIA) 68000pF±10% 5.7 5 2 3.2mm 0.3mm min. GRJ55DR73A104KWJ1L 1000Vdc X7R (EIA) 0.10µF±10% 5.7 5 2 3.2mm 0.3mm min. 149 Only for Applications Length L (mm) AC250V Type GA2 Series Capacitance Safety Standard Certified GA3 Series TC Code (Standard) Product Information Rated Voltage Part Number For General Purpose GRM/GRJ/GR3 Series Continued from the preceding page. C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRJ Series Specifications and Test Methods For General Purpose GRM/GRJ/GR3 Series No. Item Specifications Test Method 1 Operating Temperature Range –55 to +125°C 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers – No failure should be observed when voltage in the Table is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50mA. Only for Applications 4 Dielectric Strength No defects or abnormalities 5 Insulation Resistance (I.R.) CU0.01μF: More than 100MΩ s & CF0.01μF: More than 10,000MΩ 6 Capacitance Within the specified tolerance 7 Dissipation Factor (D.F.) 0.025 max. Rated Voltage DC250V DC630V DC1kV Test Voltage 200% of the rated voltage 150% of the rated voltage 120% of the rated voltage The insulation resistance should be measured with DC500±50V (DC250±25V in case of rated voltage: DC250V) and within 60±5 sec. of charging. The capacitance/D.F. should be measured at a frequency of 1±0.2kHz and a voltage of AC1±0.2V(r.m.s.). AC250V Type GA2 Series The capacitance measurement should be made at each step specified in the Table. 8 Capacitance Temperature Characteristics Cap. Change Within ±15% (Temp. Range: –55 to +125°C) Step 1 2 3 4 5 Temperature (°C) 25±2 Min. Operating Temp.±3 25±2 Max. Operating Temp.±2 25±2 Safety Standard Certified GA3 Series U*ÀiÌÀi>ÌiÌ Perform a heat treatment at 150+0 –10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* Product Information 9 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10±1s Glass Epoxy Board Fig. 1 Appearance No defects or abnormalities Capacitance Within the specified tolerance 10 Vibration Resistance D.F. Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). 0.025 max. Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 150 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRJ Series Specifications and Test Methods Continued from the preceding page. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. >«>VÌ>ViÊ Within ±12.5% >}i b ø4.5 d 11 20 50 Pressurizing speed: 1.0mm/s Pressurize 40 c a iviVÌ R230 t : 1.6 100 Fig. 2 LZW ® 2.0Z1.25 3.2Z1.6 3.2Z2.5 4.5Z3.2 5.7Z5.0 12 -`iÀ>LÌÞÊvÊ /iÀ>Ì > 1.2 2.2 2.2 3.5 4.5 iÃÊ® L V 4.0 1.65 5.0 2.0 5.0 2.9 7.0 3.7 8.0 5.6 ` >«>VÌ>ViÊ Within ±10% >}i 0.025 max. CU0.01μF: More than 100MΩ s & CF0.01μF: More than 10,000MΩ 45 45 (in mm) Fig. 3 1.0 75% of the terminations are to be soldered evenly and continuously. ««i>À>Vi No marking defects D.F. ,iÃÃÌ>ViÊ 13 ÌÊ-`iÀ}Ê I.R. i>Ì Flexure=3 (2mm for 2.0x1.25mm) Capacitance meter Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2±0.5 sec. Immersing speed: 25±2.5mm/s Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235±5°C H60A or H63A Eutectic Solder Preheat the capacitor at 120 to 150°C* for 1 min. Immerse the capacitor in solder solution at 260±5°C for 10±1 sec. Let sit at room condition* for 24±2 hrs., then measure. UiÀÃ}Êëii`\Ê25±2.5mm/s U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150+ –10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* *Preheating for more than 3.2Z2.5mm iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±7.5% >}i 14 D.F. 0.025 max. I.R. CU0.01μF: More than 100MΩ s & CF0.01μF: More than 10,000MΩ /i«iÀ>ÌÕÀiÊ ÞVi -Ìi« 1 2 /i«iÀ>ÌÕÀi 100 to 120°C 170 to 200°C /i 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24±2 hrs. at room condition,* then measure. -Ìi« 1 2 3 4 /i«iÀ>ÌÕÀiÊc ® Min. Operating Temp.±3 Room Temp. Max. Operating Temp.±2 Room Temp. /iÊ°® 30±3 2 to 3 30±3 2 to 3 U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150+ –10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 Solder resist Cu Glass Epoxy Board Fig. 4 ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±15% >}i Õ`ÌÞÊ D.F. 15 -Ìi>`ÞÊ -Ì>Ìi® I.R. iiVÌÀVÊ -ÌÀi}Ì 0.05 max. CU0.01μF: More than 10MΩ s & CF0.01μF: More than 1,000MΩ Let the capacitor sit at 40±2°C and relative humidity of 90 to 95% for 500+24 – 0hrs. Remove and let sit for 24±2 hrs. at room condition,* then measure. U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150+ –10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* In accordance with item No.4 * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 151 Only for Applications ««i>À>Vi No marking defects For General Purpose GRM/GRJ/GR3 Series /iÃÌÊiÌ ` AC250V Type GA2 Series -«iVvV>Ìà Safety Standard Certified GA3 Series Ìi Product Information ° !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf GRJ Series Specifications and Test Methods Continued from the preceding page. No. Ìi -«iVvV>Ìà For General Purpose GRM/GRJ/GR3 Series ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±15% (rated voltage: DC250V, DC630V) >}i Within ±20% (rated voltage: DC1kV) 16 vi D.F. 0.05 max. I.R. CU0.01μF: More than 10MΩ s & CF0.01μF: More than 1,000MΩ Only for Applications iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 /iÃÌÊiÌ ` Apply voltage as in Table for 1,000+48 – 0hrs. at maximum operating temperature ±3°C. Remove and let sit for 24±2 hrs. at room condition,* then measure. ,>Ìi`Ê6Ì>}i DC250V DC630V DC1kV ««i`Ê6Ì>}i 150% of the rated voltage 120% of the rated voltage 110% of the rated voltage The charge/discharge current is less than 50mA. U*ÀiÌÀi>ÌiÌ Apply test voltage for 60±5 min. at test temperature. Remove and let sit for 24±2 hrs. at room condition.* ««i>À>Vi No marking defects Õ`ÌÞÊ >`}Ê ««V>Ì\Ê 17 Óxä6]Ê ÈÎä6Ê Ìi® >«>VÌ>ViÊ Within ±15% >}i AC250V Type GA2 Series D.F. 0.05 max. I.R. CU0.01μF: More than 10MΩ s & CF0.01μF: More than 1,000MΩ iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 Apply the rated voltage at 40±2°C and relative humidity of 90 to +24 95% for 500– 0hrs. Remove and let sit for 24±2 hrs. at room condition,* then measure. U*ÀiÌÀi>ÌiÌ Apply test voltage for 60±5 min. at test temperature. Remove and let sit for 24±2 hrs. at room condition.* * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Safety Standard Certified GA3 Series Product Information 152 Oct.1,2012 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors (Medium Voltage) g e 1. This series can provide higher capacitance value under DC-Bias condition, compare with previous X7R char. 2. Improve the performance of ripple-resistance compared with X7R char. 3. Reduce acoustic noise. 4. High reliability for board bending stress 5. Sn-plated external electrodes provide good soldering, and other types with reflow soldering only. 6. Use the GR321/331 types with flow or reflow soldering, and other types with reflow soldering only. T c Features L Part Number GR321A GR321B GR331A GR331B GR331C GR332Q GR332D GR343Q GR343D GR355D GR355X L W Dimensions (mm) W T 2.0±0.2 1.25±0.2 3.2±0.2 1.6±0.2 3.2±0.3 2.5±0.2 4.5±0.4 3.2±0.3 5.7±0.4 5.0±0.4 1.0+0,-0.3 1.25±0.2 1.0+0,-0.3 1.25+0,-0.3 1.6±0.2 1.5+0,-0.3 2.0+0,-0.3 1.5+0,-0.3 2.0+0,-0.3 2.0+0,-0.3 2.7+0,-0.3 g min. e 0.7 1.2 0.3 min. 2.2 3.2 AC250V Type GA2 Series c Applications 1. DC smoothing & EMI filiter for LED Lighting. 2. For PFC circuit in the swiching power supplies, AC adaptor. 3. DC-DC converter for general electronic equipment. Rated Voltage TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GR321AD72E103KW01D 250Vdc X7T (EIA) 10000pF±10% 2 1.25 1 0.7mm 0.3mm min. GR321AD72E153KW01D 250Vdc X7T (EIA) 15000pF±10% 2 1.25 1 0.7mm 0.3mm min. GR321BD72E223KW03L 250Vdc X7T (EIA) 22000pF±10% 2 1.25 1.45 0.7mm 0.3mm min. GR331AD72E333KW01D 250Vdc X7T (EIA) 33000pF±10% 3.2 1.6 1 1.2mm 0.3mm min. GR331BD72E473KW01L 250Vdc X7T (EIA) 47000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GR331CD72E683KW03L 250Vdc X7T (EIA) 68000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min. GR332QD72E104KW01L 250Vdc X7T (EIA) 0.10µF±10% 3.2 2.5 1.5 1.2mm 0.3mm min. GR332DD72E154KW01L 250Vdc X7T (EIA) 0.15µF±10% 3.2 2.5 2 1.2mm 0.3mm min. GR343QD72E224KW01L 250Vdc X7T (EIA) 0.22µF±10% 4.5 3.2 1.5 2.2mm 0.3mm min. GR343DD72E334KW01L 250Vdc X7T (EIA) 0.33µF±10% 4.5 3.2 2 2.2mm 0.3mm min. GR355DD72E474KW01L 250Vdc X7T (EIA) 0.47µF±10% 5.7 5.0 2 3.2mm 0.3mm min. GR355DD72E684KW01L 250Vdc X7T (EIA) 0.68µF±10% 5.7 5.0 2 3.2mm 0.3mm min. GR355XD72E105KW05L 250Vdc X7T (EIA) 1.0µF±10% 5.7 5.0 2.7 3.2mm 0.3mm min. GR331AD72W103KW01D 450Vdc X7T (EIA) 10000pF±10% 3.2 1.6 1 1.2mm 0.3mm min. GR331AD72W153KW01D 450Vdc X7T (EIA) 15000pF±10% 3.2 1.6 1 1.2mm 0.3mm min. GR331BD72W223KW01L 450Vdc X7T (EIA) 22000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GR331BD72W333KW01L 450Vdc X7T (EIA) 33000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GR331CD72W473KW03L 450Vdc X7T (EIA) 47000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min. GR332DD72W683KW01L 450Vdc X7T (EIA) 68000pF±10% 3.2 2.5 2 1.2mm 0.3mm min. GR332DD72W104KW01L 450Vdc X7T (EIA) 0.10µF±10% 3.2 2.5 2 1.2mm 0.3mm min. GR343DD72W154KW01L 450Vdc X7T (EIA) 0.15µF±10% 4.5 3.2 2 2.2mm 0.3mm min. GR355DD72W224KW01L 450Vdc X7T (EIA) 0.22µF±10% 5.7 5.0 2 3.2mm 0.3mm min. GR355DD72W334KW01L 450Vdc X7T (EIA) 0.33µF±10% 5.7 5.0 2 3.2mm 0.3mm min. GR355DD72W474KW01L 450Vdc X7T (EIA) 0.47µF±10% 5.7 5.0 2 3.2mm 0.3mm min. GR355XD72W564KW05L 450Vdc X7T (EIA) 0.56µF±10% 5.7 5.0 2.7 3.2mm 0.3mm min. Continued on the following page. 153 Product Information Safety Standard Certified GA3 Series Do not use these products in any Automotive Power train or Safety equipment incliding Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile appliations such as Power train and Safety equipment. Part Number Only for Applications e For General Purpose GRM/GRJ/GR3 Series Antinoise Large Capacitance and High Allowable Ripple Current GR3 Series C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Continued from the preceding page. Rated Voltage TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) GR331BD72J103KW01L 630Vdc X7T (EIA) 10000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. GR331CD72J153KW03L 630Vdc X7T (EIA) 15000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min. GR332QD72J223KW01L 630Vdc X7T (EIA) 22000pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min. GR332DD72J333KW01L 630Vdc X7T (EIA) 33000pF±10% 3.2 2.5 2 1.2mm 0.3mm min. GR332DD72J473KW01L 630Vdc X7T (EIA) 47000pF±10% 3.2 2.5 2 1.2mm 0.3mm min. GR343DD72J683KW01L 630Vdc X7T (EIA) 68000pF±10% 4.5 3.2 2 2.2mm 0.3mm min. GR355DD72J104KW01L 630Vdc X7T (EIA) 0.1µF±10% 5.7 5.0 2 3.2mm 0.3mm min. GR355DD72J154KW01L 630Vdc X7T (EIA) 0.15µF±10% 5.7 5.0 2 3.2mm 0.3mm min. GR355XD72J224KW05L 630Vdc X7T (EIA) 0.22µF±10% 5.7 5.0 2.7 3.2mm 0.3mm min. GR355XD72J274KW05L 630Vdc X7T (EIA) 0.27µF±10% 5.7 5.0 2.7 3.2mm 0.3mm min. Part Number For General Purpose GRM/GRJ/GR3 Series Only for Applications AC250V Type GA2 Series Safety Standard Certified GA3 Series Product Information 154 Electrode g min. Electrode e C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GR3 Series Specifications and Test Methods Operating Temperature Range –55 to +125°C 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers – No failure should be observed when voltage in Table is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50mA. 4 Dielectric Strength No defects or abnormalities 5 Insulation Resistance (I.R.) More than 10,000MΩ or 100MΩ s & 7HICHEVER IS SMALLER 6 Capacitance Within the specified tolerance 7 Dissipation Factor (D.F.) 0.01 max. Rated Voltage DC250V DC450V DC630V Test Voltage 200% of the rated voltage 150% of the rated voltage 120% of the rated voltage The insulation resistance should be measured with DC500±50V (DC250±25V in case of rated voltage: DC250V, DC450V) and within 60±5 sec. of charging. The capacitance/D.F. should be measured at a frequency of 1±0.2kHz and a voltage of AC1±0.2V(r.m.s.). The capacitance measurement should be made at each step specified in the Table. 8 Capacitance Temperature Characteristics Cap. Change Within +22 –33% (Temp. Range: –55 to +125°C) Step 1 2 3 4 5 Temperature (°C) 25±2 Min. Operating Temp.±3 25±2 Max. Operating Temp.±2 25±2 U*ÀiÌÀi>ÌiÌ Perform a heat treatment at 150+0 –10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* 9 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10±1s Glass Epoxy Board Fig. 1 Appearance No defects or abnormalities Capacitance Within the specified tolerance 10 Vibration Resistance D.F. Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). 0.01 max. Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 155 Only for Applications 1 For General Purpose GRM/GRJ/GR3 Series Test Method AC250V Type GA2 Series Specifications Safety Standard Certified GA3 Series Item Product Information No. C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GR3 Series Specifications and Test Methods Continued from the preceding page. ° Ìi -«iVvV>Ìà /iÃÌÊiÌ ` B ø4.5 d 40 For General Purpose GRM/GRJ/GR3 Series 3OLDER THE CAPACITOR TO THE TESTING JIG GLASS EPOXY BOARD SHOWN IN &IG 4HEN APPLY A FORCE IN THE DIRECTION SHOWN IN &IG 4HE SOLDERING SHOULD BE DONE USING THE REFLOW METHOD AND SHOULD BE CONDUCTED WITH CARE SO THAT THE SOLDERING IS UNIFORM and free of defects such as heat shock. No marking defects c a 11 &IG Only for Applications LZW ® 2.0Z1.25 3.2Z1.6 3.2Z2.5 4.5Z3.2 5.7Z5.0 12 20 50 Pressurizing speed : 1.0mm/s Pressurize t : 1.6 100 iviVÌ AC250V Type GA2 Series -`iÀ>LÌÞÊvÊ /iÀ>Ì > 1.2 2.2 2.2 3.5 4.5 iÃÊ® L V 4.0 1.65 5.0 2.0 5.0 2.9 7.0 3.7 8.0 5.6 R230 Capacitance meter 45 OF THE TERMINATIONS ARE TO BE SOLDERED EVENLY AND CONTINUOUSLY >«>VÌ>ViÊ Within ±10% >}i Safety Standard Certified GA3 Series iiVÌÀVÊ -ÌÀi}Ì 0.01 max. More than 10,000MΩ or 100MΩ s & 7HICHEVER IS SMALLER Product Information >«>VÌ>ViÊ Within ±7.5% >}i D.F. 0.01 max. I.R. More than 10,000MΩ or 100MΩ s & 7HICHEVER IS SMALLER /i«iÀ>ÌÕÀiÊ ÞVi iiVÌÀVÊ -ÌÀi}Ì IN MM &IG )MMERSE THE CAPACITOR IN A SOLUTION OF ETHANOL *)3 + AND ROSIN *)3 + ROSIN IN WEIGHT PROPORTION Immerse in solder solution for 2±0.5 sec. Immersing speed: 25±2.5mm/s Temp. of solder: 245± # ,EAD &REE 3OLDER 3N !G #U 235± # (! OR (! %UTECTIC 3OLDER Preheat the capacitor at 120 to 150°C* for 1 min. Immerse the capacitor in solder solution at 260±5°C for 10±1 sec. Let sit at room condition* for 24±2 hrs., then measure. UiÀÃ}Êëii`\Ê25±2.5mm/s U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150+ –10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* *Preheating for more than 3.2Z2.5mm In accordance with item No.4 ««i>À>Vi No marking defects 14 45 1.0 ««i>À>Vi No marking defects D.F. ,iÃÃÌ>ViÊ 13 ÌÊ-`iÀ}Ê I.R. i>Ì &LEXURE MM FOR ZMM ` -Ìi« 1 2 /i«iÀ>ÌÕÀi 100 to 120°C 170 to 200°C /i 1 min. 1 min. &IX THE CAPACITOR TO THE SUPPORTING JIG GLASS EPOXY BOARD SHOWN IN &IG Perform the 5 cycles according to the 4 heat treatments listed in THE FOLLOWING TABLE Let sit for 24±2 hrs. at room condition,* then measure. -Ìi« 1 2 3 4 /i«iÀ>ÌÕÀiÊc ® Min. Operating Temp.W0 Y3 Room Temp. Max. Operating Temp.W2 Y0 Room Temp. /iÊ°® 30±3 2 to 3 30±3 2 to 3 U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150+ –10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* In accordance with item No.4 3OLDER RESIST Cu Glass Epoxy Board &IG ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±12.5% >}i Õ`ÌÞÊ 15 -Ìi>`ÞÊ D.F. -Ì>Ìi® I.R. iiVÌÀVÊ -ÌÀi}Ì 0.02 max. More than 1,000MΩ or 10MΩ s & 7HICHEVER IS SMALLER In accordance with item No.4 Let the capacitor sit at 40±2°C and relative humidity of 90 to 95% for 500+24 – 0hrs. Remove and let sit for 24±2 hrs. at room condition,* then measure. U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150+ –10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 156 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GR3 Series Specifications and Test Methods Continued from the preceding page. ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±12.5% >}i 16 vi D.F. 0.02 max. I.R. More than 1,000MΩ or 10MΩ s & 7HICHEVER IS SMALLER iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 /iÃÌÊiÌ ` Apply voltage as Table for 1,000+48 – 0hrs. at maximum operating temperature ±3°C. Remove and let sit for 24±2hrs. at room condition,* then measure. ,>Ìi`Ê6Ì>}i DC250V DC450V DC630V ««i`Ê6Ì>}i 150% of the rated voltage 130% of the rated voltage 120% of the rated voltage The charge/discharge current is less than 50mA. U*ÀiÌÀi>ÌiÌ Apply test voltage for 60±5 min. at test temperature. Remove and let sit for 24±2 hrs. at room condition.* ««i>À>Vi No marking defects 17 Õ`ÌÞÊ D.F. >`}Ê I.R. iiVÌÀVÊ -ÌÀi}Ì 0.02 max. More than 1,000MΩ or 10MΩ s & 7HICHEVER IS SMALLER In accordance with item No.4 Apply the rated voltage at 40±2°C and relative humidity of 90 to +24 95% for 500– 0hrs. Remove and let sit for 24±2 hrs. at room condition,* then measure. U*ÀiÌÀi>ÌiÌ Apply test voltage for 60±5 min. at test temperature. Remove and let sit for 24±2 hrs. at room condition.* AC250V Type GA2 Series >«>VÌ>ViÊ Within ±12.5% >}i For General Purpose GRM/GRJ/GR3 Series -«iVvV>Ìà Only for Applications Ìi No. Product Information Safety Standard Certified GA3 Series * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 157 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors (Medium Voltage) For LCD Backlight Inverter Circuit GRM/DC3.15kV Series e Only for Applications GRM/DC3.15kV Series AC250V Type GA2 Series 1. Low-loss and suitable for high frequency circuits 2. Murata's original internal electrode structure realizes high flash-over voltage. 3. A new monolithic structure for small, surfacemountable devices capable of operating at high voltage levels. 4. Sn-plated external electrodes realize good solderability. 5. Only for reflow soldering 6. Capacitance values less than 22pF can be used in LCD backlight inverter circuits as long as the applied voltage, peak to peak, is less than 4.0kV at 100kHz or less. g e T For General Purpose GRM/GRJ/GR3 Series c Features L Part Number GRM42A L 4.5 ±0.3 W Dimensions (mm) W T e min. 2.0 ±0.2 1.0 +0, - 0.3 0.3 g min. 2.9 c Applications Ideal for use as the ballast in LCD backlight inverter. Safety Standard Certified GA3 Series Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Product Information Rated Voltage TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GRM42A5C3F050DW01L 3150Vdc C0G (EIA) 5.0pF±0.5pF 4.5 2.0 1 2.9mm 0.3mm min. GRM42A5C3F100JW01L 3150Vdc C0G (EIA) 10pF±5% 4.5 2.0 1 2.9mm 0.3mm min. GRM42A5C3F120JW01L 3150Vdc C0G (EIA) 12pF±5% 4.5 2.0 1 2.9mm 0.3mm min. GRM42A5C3F150JW01L 3150Vdc C0G (EIA) 15pF±5% 4.5 2.0 1 2.9mm 0.3mm min. GRM42A5C3F180JW01L 3150Vdc C0G (EIA) 18pF±5% 4.5 2.0 1 2.9mm 0.3mm min. GRM42A5C3F220JW01L 3150Vdc C0G (EIA) 22pF±5% 4.5 2.0 1 2.9mm 0.3mm min. GRM42A5C3F270JW01L 3150Vdc C0G (EIA) 27pF±5% 4.5 2.0 1 2.9mm 0.3mm min. GRM42A5C3F330JW01L 3150Vdc C0G (EIA) 33pF±5% 4.5 2.0 1 2.9mm 0.3mm min. GRM42A5C3F390JW01L 3150Vdc C0G (EIA) 39pF±5% 4.5 2.0 1 2.9mm 0.3mm min. GRM42A5C3F470JW01L 3150Vdc C0G (EIA) 47pF±5% 4.5 2.0 1 2.9mm 0.3mm min. Part Number 158 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM/DC3.15kV Series Specifications and Test Methods 1 Operating Temperature Range –55 to +125°C 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimension Using calipers and micrometers 4 Dielectric Strength No defects or abnormalities No failure should be observed when DC4095V is applied between the terminations for 1 to 5 sec., provided the charge/ discharge current is less than 50mA. 5 Insulation Resistance (I.R.) More than 10,000MΩ The insulation resistance should be measured with DC500±50V and within 60±5 sec. of charging. 6 Capacitance Within the specified tolerance 7 Q 1,000 min. – The capacitance/Q should be measured at a frequency of 1±0.2MHz and a voltage of AC0.5 to 5V(r.m.s.). The capacitance measurement should be made at each step specified in the Table. 8 9 Capacitance Temperature Characteristics Adhesive Strength of Termination Step 1 2 3 4 5 Temp. Coefficient 0±30ppm/°C (Temp. Range: +25 to +125°C) 0+30, –72ppm/°C (Temp. Range: –55 to +25°C) No removal of the terminations or other defect should occur. Temperature (°C) 25±2 Min. Operating Temp.±3 25±2 Max. Operating Temp.±2 25±2 Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10±1s Glass Epoxy Board Fig. 1 10 Appearance No defects or abnormalities Capacitance Within the specified tolerance Q 1,000 min. Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Vibration Resistance Solder resist Cu Glass Epoxy Board Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. No marking defects b ø4.5 40 d c 20 50 Pressurizing speed: 1.0mm/s Pressurize a 11 Deflection 100 t : 1.6 R230 Fig. 2 LZW (mm) 4.5Z2.0 a 3.5 Dimension (mm) b c 7.0 2.4 Flexure=1 d 1.0 Capacitance meter 45 45 (in mm) Fig. 3 Continued on the following page. 159 Only for Applications For General Purpose GRM/DC3.15kV Series GRM/GRJ/GR3 Series Test Method AC250V Type GA2 Series Specifications Safety Standard Certified GA3 Series Item Product Information No. C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM/DC3.15kV Series Specifications and Test Methods Continued from the preceding page. No. For General Purpose GRM/GRJ/GR3 Series 12 Solderability of Termination 75% of the terminations are to be soldered evenly and continuously. Appearance No marking defects Capacitance Change Within ±2.5% Only for Applications GRM/DC3.15kV Series ,iÃÃÌ>ViÊ 13 to Soldering Q Heat I.R. AC250V Type GA2 Series 14 -«iVvV>Ìà Item /iÃÌÊiÌ ` Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2±0.5 sec. Immersing speed: 25±2.5mm/s Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235±5°C H60A or H63A Eutectic Solder Preheat the capacitor as in table. Immerse the capacitor in solder solution at 260±5°C for 10±1 sec. Let sit at room condition* for 24±2 hrs., then measure. UiÀÃ}Êëii`: 25±2.5mm/s 1,000 min. More than 10,000MΩ Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within ±2.5% Q 1,000 min. I.R. More than 10,000MΩ Dielectric Strength In accordance with item No.4 Temperature Cycle *Preheating Step 1 2 Temperature 100 to 120°C 170 to 200°C Time 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24±2 hrs. at room condition,* then measure. Step 1 2 3 4 Temperature (°C) Min. Operating Temp.±3 Room Temp. Max. Operating Temp.±2 Room Temp. Time (min.) 30±3 2 to 3 30±3 2 to 3 Safety Standard Certified GA3 Series Solder resist Cu Glass Epoxy Board Fig. 4 Appearance No marking defects Capacitance Change Within ±5.0% Product Information Humidity 15 (Steady Q State) I.R. 16 Life 350 min. More than 1,000MΩ Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within ±3.0% Q 350 min. I.R. More than 1,000MΩ Dielectric Strength In accordance with item No.4 Let the capacitor sit at 40±2°C and relative humidity of 90 to 95% for 500W24 Y 0hrs. Remove and let sit for 24±2 hrs. at room condition,* then measure. Apply 120% of the rated voltage for 1,000W48 Y 0 hrs. at maximum operating temperature ±3°C. Remove and let sit for 24±2 hrs. at room condition,* then measure. The charge/discharge current is less than 50mA. * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 160 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors (Medium Voltage) g e c Features T 1. These items are designed specifically for telecommunications devices (IEEE802.3) in Ethernet LAN and primary-secondary coupling for DC-DC converters. 2. A new monolithic structure for small, high capacitance capable of operating at high voltage levels 3. Sn-plated external electrodes realize good solderability. 4. Only for reflow soldering L Part Number GR442Q GR443D GR443Q GR455D L 4.5 ±0.3 4.5 ±0.4 5.7 ±0.4 W Dimensions (mm) W T 2.0 ±0.2 1.5 +0, -0.3 2.0 +0, -0.3 3.2 ±0.3 1.5 +0, -0.3 2.0 +0, -0.3 5.0 ±0.4 e min. g min. 0.3 2.5 3.2 AC250V Type GA2 Series c Applications 1. Ideal for use on telecommunications devices in Ethernet LAN 2. Ideal for use as primary-secondary coupling for DC-DC converters Rated Voltage TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GR442QR73D101KW01L 2000Vdc X7R (EIA) 100pF±10% 4.5 2 1.5 2.5mm 0.3mm min. GR442QR73D121KW01L 2000Vdc X7R (EIA) 120pF±10% 4.5 2 1.5 2.5mm 0.3mm min. GR442QR73D151KW01L 2000Vdc X7R (EIA) 150pF±10% 4.5 2 1.5 2.5mm 0.3mm min. GR442QR73D181KW01L 2000Vdc X7R (EIA) 180pF±10% 4.5 2 1.5 2.5mm 0.3mm min. GR442QR73D221KW01L 2000Vdc X7R (EIA) 220pF±10% 4.5 2 1.5 2.5mm 0.3mm min. GR442QR73D271KW01L 2000Vdc X7R (EIA) 270pF±10% 4.5 2 1.5 2.5mm 0.3mm min. GR442QR73D331KW01L 2000Vdc X7R (EIA) 330pF±10% 4.5 2 1.5 2.5mm 0.3mm min. GR442QR73D391KW01L 2000Vdc X7R (EIA) 390pF±10% 4.5 2 1.5 2.5mm 0.3mm min. GR442QR73D471KW01L 2000Vdc X7R (EIA) 470pF±10% 4.5 2 1.5 2.5mm 0.3mm min. GR442QR73D561KW01L 2000Vdc X7R (EIA) 560pF±10% 4.5 2 1.5 2.5mm 0.3mm min. GR442QR73D681KW01L 2000Vdc X7R (EIA) 680pF±10% 4.5 2 1.5 2.5mm 0.3mm min. GR442QR73D821KW01L 2000Vdc X7R (EIA) 820pF±10% 4.5 2 1.5 2.5mm 0.3mm min. GR442QR73D102KW01L 2000Vdc X7R (EIA) 1000pF±10% 4.5 2 1.5 2.5mm 0.3mm min. GR442QR73D122KW01L 2000Vdc X7R (EIA) 1200pF±10% 4.5 2 1.5 2.5mm 0.3mm min. GR442QR73D152KW01L 2000Vdc X7R (EIA) 1500pF±10% 4.5 2 1.5 2.5mm 0.3mm min. GR443QR73D182KW01L 2000Vdc X7R (EIA) 1800pF±10% 4.5 3.2 1.5 2.5mm 0.3mm min. GR443QR73D222KW01L 2000Vdc X7R (EIA) 2200pF±10% 4.5 3.2 1.5 2.5mm 0.3mm min. GR443QR73D272KW01L 2000Vdc X7R (EIA) 2700pF±10% 4.5 3.2 1.5 2.5mm 0.3mm min. GR443QR73D332KW01L 2000Vdc X7R (EIA) 3300pF±10% 4.5 3.2 1.5 2.5mm 0.3mm min. GR443QR73D392KW01L 2000Vdc X7R (EIA) 3900pF±10% 4.5 3.2 1.5 2.5mm 0.3mm min. GR443DR73D472KW01L 2000Vdc X7R (EIA) 4700pF±10% 4.5 3.2 2 2.5mm 0.3mm min. GR455DR73D103KW01L 2000Vdc X7R (EIA) 10000pF±10% 5.7 5 2 3.2mm 0.3mm min. 161 Product Information Safety Standard Certified GA3 Series Do not use these products in any Automotive Power train or Safety equipment including Battery charger for Electric Vehicles and Plug-in Hybrid. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Part Number Only for Applications GR4 Series e For General Purpose GRM/GRJ/GR3 Series For Information Devices GR4 Series C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GR4 Series Specifications and Test Methods For General Purpose GRM/GRJ/GR3 Series No. Item Specifications Test Method 1 Operating Temperature Range –55 to +125°C 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers – No failure should be observed when voltage in the table is applied between the terminations, provided the charge/discharge current is less than 50mA. 4 Dielectric Strength No defects or abnormalities Rated Voltage Only for Applications GR4 Series DC2kV AC250V Type GA2 Series 5 *ÕÃiÊ6Ì>}i No self healing breakdowns or flash-overs have taken place in the capacitor. 6 Insulation Resistance (I.R.) More than 6,000MΩ 7 Capacitance Within the specified tolerance 8 Dissipation Factor (D.F.) 0.025 max. Test Voltage 120% of the rated voltage AC1500V(r.m.s.) Time 60±1 sec. 60±1 sec. 10 impulses of alternating polarity are subjected. (5 impulses for each polarity) The interval between impulses is 60 sec. Applied Pulse: 1.2/50μs Applied Voltage: 2.5kVo-p The insulation resistance should be measured with DC500±50V and within 60±5 sec. of charging. The capacitance/D.F. should be measured at a frequency of 1±0.2kHz and a voltage of AC1±0.2V(r.m.s.). The capacitance measurement should be made at each step specified in the Table. Safety Standard Certified GA3 Series 9 Capacitance Temperature Characteristics Cap. Change within ±15% (Temp. Range: –55 to +125°C) Step 1 2 3 4 5 Temperature (°C) 25±2 Min. Operating Temp.±3 25±2 Max. Operating Temp.±2 25±2 U*ÀiÌÀi>ÌiÌ Perform a heat treatment at 150W0 Y10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* Product Information 10 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10±1s Glass Epoxy Board Fig. 1 11 Appearance No defects or abnormalities Capacitance Within the specified tolerance D.F. 0.025 max. Vibration Resistance Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 162 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GR4 Series Specifications and Test Methods Continued from the preceding page. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. b ø4.5 40 d c 20 50 Pressurizing speed: 1.0mm/s Pressurize a 12 iviVÌ t : 1.6 100 R230 Fig. 2 LZW ® 4.5Z2.0 4.5Z3.2 5.7Z5.0 13 -`iÀ>LÌÞÊvÊ /iÀ>Ì ««i>À>Vi >«>VÌ>ViÊ >}i D.F. ,iÃÃÌ>ViÊ 14 ÌÊ-`iÀ}Ê I.R. i>Ì No marking defects Within ±10% 0.025 max. More than 1,000MΩ Flexure=1 ` Capacitance meter 45 1.0 (in mm) 45 Fig. 3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2±0.5 sec. Immersing speed: 25±2.5mm/s Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235±5°C H60A or H63A Eutectic Solder Preheat the capacitor as in table. Immerse the capacitor in solder solution at 260±5°C for 10±1 sec. Let sit at room condition* for 24±2 hrs., then measure. UiÀÃ}Êëii`: 25±2.5mm/s U*ÀiÌÀi>ÌiÌ W 0 Perform a heat treatment at 150Y10 °C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* **Ài i>Ì} In accordance with item No.4 ««i>À>Vi No marking defects Within ±15% D.F. 0.05 max. I.R. More than 3,000MΩ /i«iÀ>ÌÕÀiÊ ÞVi iiVÌÀVÊ -ÌÀi}Ì iÃÊ® L V 7.0 2.4 7.0 3.7 8.0 5.6 75% of the terminations are to be soldered evenly and continuously. iiVÌÀVÊ -ÌÀi}Ì >«>VÌ>ViÊ >}i 15 > 3.5 3.5 4.5 -Ìi« 1 2 /i«iÀ>ÌÕÀi 100 to 120°C 170 to 200°C /i 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24±2 hrs. at room condition,* then measure. -Ìi« 1 2 3 4 /i«iÀ>ÌÕÀiÊc ® Min. Operating Temp.±3 Room Temp. Max. Operating Temp.±2 Room Temp. /iÊ°® 30±3 2 to 3 30±3 2 to 3 U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150W Y10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* In accordance with item No.4 Solder resist Cu Glass Epoxy Board Fig. 4 ««i>À>Vi >«>VÌ>ViÊ >}i Õ`ÌÞÊ 16 -Ìi>`ÞÊ D.F. -Ì>Ìi® I.R. iiVÌÀVÊ -ÌÀi}Ì No marking defects Within ±15% 0.05 max. More than 1,000MΩ In accordance with item No.4 Let the capacitor sit at 40±2°C and relative humidity of 90 to 95% for 500W24 Y 0 hrs. Remove and let sit for 24±2 hrs. at room condition,* then measure. U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150W Y10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 163 Only for Applications GR4 Series No marking defects For General Purpose GRM/GRJ/GR3 Series /iÃÌÊiÌ ` AC250V Type GA2 Series -«iVvV>Ìà Safety Standard Certified GA3 Series Ìi Product Information ° !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf GR4 Series Specifications and Test Methods Continued from the preceding page. No. Ìi For General Purpose GRM/GRJ/GR3 Series ««i>À>Vi >«>VÌ>ViÊ >}i 17 vi -«iVvV>Ìà /iÃÌÊiÌ ` No marking defects Within ±20% D.F. 0.05 max. I.R. More than 2,000MΩ iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 Apply 110% of the rated voltage for 1,000W48 Y 0 hrs. at maximum operating temperature ±3°C. Remove and let sit for 24±2 hrs. at room condition,* then measure. The charge/discharge current is less than 50mA. U*ÀiÌÀi>ÌiÌ Apply test voltage for 60±5 min. at test temperature. Remove and let sit for 24±2 hrs. at room condition.* * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Only for Applications GR4 Series AC250V Type GA2 Series Safety Standard Certified GA3 Series Product Information 164 Oct.1,2012 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors (Medium Voltage) g e c Features T 1. Suitable for the trigger of the flash circuit, because real capacitance is stable during operating voltage. 2. The thin type fits thinner cameras. 3. Sn-plated external electrodes realize good solderability. 4. For flow and reflow soldering L Part Number GR721A GR721B GR731A GR731B GR731C c Applications For strobe circuit L 2.0 ±0.2 3.2 ±0.2 W Dimensions (mm) W T e min. g min. 1.0 +0, -0.3 1.25 ±0.2 0.7 1.25 ±0.2 1.0 +0, -0.3 0.3 1.6 ±0.2 1.25 +0, -0.3 1.2 1.6 ±0.2 Electrode e 1 0.7mm 0.3mm min. 1 1.2mm 0.3mm min. 1 0.7mm 0.3mm min. 1.6 1 1.2mm 0.3mm min. 1.25 1.45 0.7mm 0.3mm min. 1.6 1 1.2mm 0.3mm min. 3.2 1.6 1.25 1.2mm 0.3mm min. 27000pF±10% 2 1.25 1.45 0.7mm 0.3mm min. - 27000pF±10% 3.2 1.6 1 1.2mm 0.3mm min. - 33000pF±10% 3.2 1.6 1 1.2mm 0.3mm min. 350Vdc - 33000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min. 350Vdc - 47000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min. Width W (mm) 10000pF±10% 2 1.25 10000pF±10% 3.2 1.6 - 15000pF±10% 2 1.25 350Vdc - 15000pF±10% 3.2 350Vdc - 22000pF±10% 2 GR731AW0BB223KW01D 350Vdc - 22000pF±10% 3.2 GR731BW0BB223KW01L 350Vdc - 22000pF±10% GR721BW0BB273KW03L 350Vdc - GR731AW0BB273KW01D 350Vdc GR731AW0BB333KW01D 350Vdc GR731BW0BB333KW01L GR731CW0BB473KW03L TC Code (Standard) Capacitance GR721AW0BB103KW01D 350Vdc - GR731AW0BB103KW01D 350Vdc - GR721AW0BB153KW01D 350Vdc GR731AW0BB153KW01D GR721BW0BB223KW03L 165 Product Information Thickness T max. (mm) Electrode g min. Length L (mm) Rated Voltage Part Number Safety Standard Certified GA3 Series AC250V Type GA2 Series Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Only for Applications GR7 Series e For General Purpose GRM/GRJ/GR3 Series For Camera Flash Circuit GR7 Series C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GR7 Series Specifications and Test Methods For General Purpose GRM/GRJ/GR3 Series Only for Applications GR7 Series No. Item Specifications Test Method 1 Operating Temperature Range –55 to +125°C 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers 4 Dielectric Strength No defects or abnormalities No failure should be observed when DC500V is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50mA. 5 Insulation Resistance (I.R.) CU0.01μF: More than 100MΩ s & CF0.01μF: More than 10,000MΩ The insulation resistance should be measured with DC250±50V and within 60±5 sec. of charging. 6 Capacitance Within the specified tolerance 7 Dissipation Factor (D.F.) 0.025 max. – The capacitance/D.F. should be measured at a frequency of 1±0.2kHz and a voltage of AC1±0.2V(r.m.s.). The capacitance measurement should be made at each step specified in the Table. AC250V Type GA2 Series 8 Capacitance Temperature Characteristics Cap. Change Within ±10% (Apply DC350V bias) Within W22 Y33 % (No DC bias) (Temp. Range : –55 to +125°C) Step 1 2 3 4 5 Temperature (°C) 25±2 Min. Operating Temp.±3 25±2 Max. Operating Temp.±2 25±2 U*ÀiÌÀi>ÌiÌ W0 Perform a heat treatment at 150Y10 °C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* Safety Standard Certified GA3 Series 9 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10±1s Glass Epoxy Board Product Information Fig. 1 10 Appearance No defects or abnormalities Capacitance Within the specified tolerance D.F. 0.025 max. Vibration Resistance Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 166 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GR7 Series Specifications and Test Methods Continued from the preceding page. ø4.5 40 d c 20 50 Pressurizing speed: 1.0mm/s Pressurize a 11 Deflection t : 1.6 100 R230 Fig. 2 LZW (mm) 2.0Z1.25 3.2Z1.6 12 Solderability of Termination 14 Flexure=1 No marking defects Capacitance Change Within ±10% 0.025 max. CU0.01μF: More than 100MΩ s & CF0.01μF: More than 10,000MΩ Dielectric Strength In accordance with item No.4 Appearance No marking defects Capacitance Change Within ±7.5% D.F. 0.025 max. I.R. CU0.01μF: More than 100MΩ s & CF0.01μF: More than 10,000MΩ Temperature Cycle Capacitance meter d 45 1.0 75% of the terminations are to be soldered evenly and continuously. Appearance ,iÃÃÌ>ViÊ D.F. 13 to Soldering Heat I.R. a 1.2 2.2 iÃÊ® b c 4.0 1.65 5.0 2.0 (in mm) 45 Fig. 3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2±0.5 sec. Immersing speed: 25±2.5mm/s Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235±5°C H60A or H63A Eutectic Solder Preheat the capacitor at 120 to 150°C for 1 min. Immerse the capacitor in solder solution at 260±5°C for 10±1 sec. Let sit at room condition* for 24±2 hrs., then measure. UiÀÃ}Êëii`: 25±2.5mm/s U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150W Y10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24±2 hrs. at room condition,* then measure. Step 1 2 3 4 Temperature (°C) Min. Operating Temp.±3 Room Temp. Max. Operating Temp.±2 Room Temp. Time (min.) 30±3 2 to 3 30±3 2 to 3 U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150W Y10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* Dielectric Strength In accordance with item No.4 Solder resist Cu Glass Epoxy Board Fig. 4 Humidity 15 (Steady State) Appearance No marking defects Capacitance Change Within ±15% D.F. 0.05 max. I.R. CU0.01μF: More than 10MΩ s & CF0.01μF: More than 1,000MΩ Dielectric Strength In accordance with item No.4 Let the capacitor sit at 40±2°C and relative humidity of 90 to 95% W24 for 500Y 0 hrs. Remove and let sit for 24±2 hrs. at room condition,* then measure. s0RETREATMENT 0 Perform a heat treatment at 150W Y10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 167 Only for Applications GR7 Series b AC250V Type GA2 Series Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. No marking defects For General Purpose GRM/GRJ/GR3 Series /iÃÌÊiÌ ` Safety Standard Certified GA3 Series -«iVvV>Ìà Item Product Information No. !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf GR7 Series Specifications and Test Methods Continued from the preceding page. Ìi No. For General Purpose GRM/GRJ/GR3 Series ««i>À>Vi >«>VÌ>ViÊ >}i 16 vi Within ±15% Only for Applications GR7 Series 0.05 max. I.R. CU0.01μF: More than 10MΩ s & CF0.01μF: More than 1,000MΩ iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 ««i>À>Vi No marking defects Õ`ÌÞÊ D.F. >`}Ê I.R. iiVÌÀVÊ -ÌÀi}Ì /iÃÌÊiÌ ` No marking defects D.F. >«>VÌ>ViÊ >}i 17 -«iVvV>Ìà Within ±15% 0.05 max. CU0.01μF: More than 10MΩ s & CF0.01μF: More than 1,000MΩ Apply DC350V for 1,000W48 Y 0 hrs. at maximum operating temperature ±3°C. Remove and let sit for 24±2 hrs. at room condition,* then measure. The charge/discharge current is less than 50mA. U*ÀiÌÀi>ÌiÌ Apply test voltage for 60±5 min. at test temperature. Remove and let sit for 24±2 hrs. at room condition.* Apply the rated voltage at 40±2°C and relative humidity of 90 to W24 95% for 500Y 0 hrs. Remove and let sit for 24±2 hrs. at room condition,* then measure. U*ÀiÌÀi>ÌiÌ Apply test voltage for 60±5 min. at test temperature. Remove and let sit for 24±2 hrs. at room condition.* In accordance with item No.4 AC250V Type GA2 Series * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Safety Standard Certified GA3 Series Product Information 168 Oct.1,2012 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors g e c Features T 1. Chip monolithic ceramic capacitor for AC lines. 2. A new monolithic structure for small, high capacitance capable of operating at high voltage levels. 3. Sn-plated external electrodes realize good solderability. 4. Only for reflow soldering 5. Capacitance 0.01 to 0.1uF for connecting lines and 470 to 4700pF for connecting lines to earth. L Part Number GA242Q GA243D GA243Q GA255D L 4.5 ±0.3 4.5 ±0.4 5.7 ±0.4 W Dimensions (mm) W T e min. 2.0 ±0.2 1.5 +0, -0.3 2.0 +0, -0.3 3.2 ±0.3 0.3 1.5 +0, -0.3 5.0 ±0.4 2.0 +0, -0.3 g min. 2.5 3.2 Only for Applications e For General Purpose GRM/GRJ/GR3 Series AC250V Type (Which Meet Japanese Law) GA2 Series c Applications AC250V Type GA2 Series Noise suppression filters for switching power supplies, telephones, facsimiles, modems. c Reference Standard GA2 series obtains no safety approval. This series is based on the standards of the electrical appliance and material safety law of Japan (separated table 4). Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e X7R (EIA) 470pF±20% 4.5 2.0 1.5 2.5mm 0.3mm min. X7R (EIA) 1000pF±20% 4.5 2.0 1.5 2.5mm 0.3mm min. 250Vac(r.m.s.) X7R (EIA) 2200pF±20% 4.5 3.2 1.5 2.5mm 0.3mm min. GA243QR7E2332MW01L 250Vac(r.m.s.) X7R (EIA) 3300pF±20% 4.5 3.2 1.5 2.5mm 0.3mm min. GA243DR7E2472MW01L 250Vac(r.m.s.) X7R (EIA) 4700pF±20% 4.5 3.2 2 2.5mm 0.3mm min. GA243QR7E2103MW01L 250Vac(r.m.s.) X7R (EIA) 10000pF±20% 4.5 3.2 1.5 2.5mm 0.3mm min. GA243QR7E2223MW01L 250Vac(r.m.s.) X7R (EIA) 22000pF±20% 4.5 3.2 1.5 2.5mm 0.3mm min. GA243DR7E2473MW01L 250Vac(r.m.s.) X7R (EIA) 47000pF±20% 4.5 3.2 2 2.5mm 0.3mm min. GA255DR7E2104MW01L 250Vac(r.m.s.) X7R (EIA) 0.10µF±20% 5.7 5.0 2 3.2mm 0.3mm min. Rated Voltage TC Code (Standard) GA242QR7E2471MW01L 250Vac(r.m.s.) GA242QR7E2102MW01L 250Vac(r.m.s.) GA243QR7E2222MW01L Part Number 169 Product Information Safety Standard Certified GA3 Series Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GA2 Series Specifications and Test Methods For General Purpose GRM/GRJ/GR3 Series No. Item Specifications Test Method 1 Operating Temperature Range –55 to +125°C 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers – No failure should be observed when voltage in the table is applied between the terminations for 60±1 sec., provided the charge/discharge current is less than 50mA. Only for Applications 4 Dielectric Strength No defects or abnormalities 5 Insulation Resistance (I.R.) More than 2,000MΩ 6 Capacitance Within the specified tolerance 7 Dissipation Factor (D.F.) 0.025 max. Nominal Capacitance CU10,000pF CF10,000pF Test Voltage AC575V (r.m.s.) AC1500V (r.m.s.) The insulation resistance should be measured with DC500±50V and within 60±5 sec. of charging. The capacitance/D.F. should be measured at a frequency of 1±0.2kHz and a voltage of AC1±0.2V (r.m.s.). The capacitance measurement should be made at each step specified in the Table. AC250V Type GA2 Series 8 Capacitance Temperature Characteristics Cap. Change Within ±15% (Temp. Range: –55 to +125°C) Step 1 2 3 4 5 Temperature (°C) 25±2 Min. Operating Temp.±3 25±2 Max. Operating Temp.±2 25±2 Safety Standard Certified GA3 Series U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150W Y10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* As in Fig., discharge is made 50 times at 5 sec. intervals from the capacitor (Cd) charged at DC voltage of specified. 9 Product Information Discharge Test (Application: Nominal Capacitance CF10,000pF) R3 Appearance R1 No defects or abnormalities 10kV V Ct R2 Cd Ct: Capacitor under test Cd: 0.001μF R1: 1,000Ω R2: 100MΩ R3: Surge resistance 10 Adhesive Strength of Termination No removal of the terminations or other defects should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10±1s Glass Epoxy Board Fig. 1 11 Appearance No defects or abnormalities Capacitance Within the specified tolerance D.F. 0.025 max. Vibration Resistance Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Solder resist Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 170 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GA2 Series Specifications and Test Methods Continued from the preceding page. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. b ø4.5 40 d c a 12 iviVÌ 20 50 Pressurizing speed: 1.0mm/s Pressurize t : 1.6 100 Fig. 2 LZW ® 4.5Z2.0 4.5Z3.2 5.7Z5.0 13 -`iÀ>LÌÞÊvÊ /iÀ>Ì ««i>À>Vi >«>VÌ>ViÊ >}i 14 Õ`ÌÞ ÃÕ>Ì More than 1,000MΩ iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 ««i>À>Vi No marking defects Within ±10% 0.025 max. More than 2,000MΩ iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 ««i>À>Vi No marking defects Within ±15% D.F. 0.05 max. I.R. More than 2,000MΩ /i«iÀ>ÌÕÀiÊ ÞVi iiVÌÀVÊ -ÌÀi}Ì Capacitance meter 45 1.0 45 (in mm) Fig. 3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2±0.5 sec. Immersing speed: 25±2.5mm/s Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235±5°C H60A or H63A Eutectic Solder Within ±15% I.R. >«>VÌ>ViÊ >}i Flexure=1 ` No marking defects 0.05 max. D.F. ,iÃÃÌ>ViÊ 15 ÌÊ-`iÀ}Ê I.R. i>Ì iÃÊ® L c 7.0 2.4 7.0 3.7 8.0 5.6 75% of the terminations are to be soldered evenly and continuously. D.F. >«>VÌ>ViÊ >}i 16 > 3.5 3.5 4.5 R230 In accordance with item No.4 The capacitor should be subjected to 40±2°C, relative humidity of 90 to 98% for 8 hrs., and then removed in room condition* for 16 hrs. until 5 cycles. Preheat the capacitor as in table. Immerse the capacitor in solder solution at 260±5°C for 10±1 sec. Let sit at room condition* for 24±2 hrs., then measure. UiÀÃ}Êëii`: 25±2.5mm/s U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150W Y10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* **Ài i>Ì} -Ìi« 1 2 /i«iÀ>ÌÕÀi 100 to 120°C 170 to 200°C /i 1 min. 1 min. Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24±2 hrs. at room condition,* then measure. -Ìi« 1 2 3 4 /i«iÀ>ÌÕÀiÊc ® Min. Operating Temp.±3 Room Temp. Max. Operating Temp.±2 Room Temp. /iÊ°® 30±3 2 to 3 30±3 2 to 3 U*ÀiÌÀi>ÌiÌ 0 Perform a heat treatment at 150W Y10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* Solder resist Cu Glass Epoxy Board Fig. 4 * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 171 Only for Applications No marking defects For General Purpose GRM/GRJ/GR3 Series /iÃÌÊiÌ ` AC250V Type GA2 Series -«iVvV>Ìà Safety Standard Certified GA3 Series Ìi Product Information ° !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf GA2 Series Specifications and Test Methods Continued from the preceding page. Ìi No. For General Purpose GRM/GRJ/GR3 Series ««i>À>Vi >«>VÌ>ViÊ >}i Õ`ÌÞÊ 17 -Ìi>`ÞÊ D.F. Ê-Ì>Ìi® I.R. -«iVvV>Ìà No marking defects Within ±15% 0.05 max. More than 1,000MΩ iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 ««i>À>Vi No marking defects Only for Applications >«>VÌ>ViÊ >}i Within ±20% D.F. 0.05 max. I.R. More than 1,000MΩ 18 vi AC250V Type GA2 Series 19 Safety Standard Certified GA3 Series Õ`ÌÞ >`} Let the capacitor sit at 40±2°C and relative humidity of 90 to 95% W24 for 500Y 0hrs. Remove and let sit for 24±2 hrs. at room condition,* then measure. U*ÀiÌÀi>ÌiÌ W 0 Perform a heat treatment at 150Y10 °C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* Apply voltage and time as in Table at maximum operating temperature ±3°C. Remove and let sit for 24±2 hrs. at room condition,* then measure. The charge / discharge current is less than 50mA. >Ê >«>VÌ>Vi /iÃÌÊ/i /iÃÌÊ6Ì>}i W48 CU10,000pF 1,000Y 0 hrs. AC300V (r.m.s.) W48 CF10,000pF 1,500Y 0 hrs. AC500V (r.m.s.) * * Except that once each hour the voltage is increased to AC1,000V (r.m.s.) for 0.1 sec. iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 ««i>À>Vi No marking defects >«>VÌ>ViÊ >}i /iÃÌÊiÌ ` U*ÀiÌÀi>ÌiÌ Apply test voltage for 60±5 min. at test temperature. Remove and let sit for 24±2 hrs. at room condition.* Within ±15% D.F. 0.05 max. I.R. More than 1,000MΩ iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 Apply the rated voltage at 40±2°C and relative humidity of 90 to W24 95% for 500Y 0hrs. Remove and let sit for 24±2 hrs. at room condition,* then measure. U*ÀiÌÀi>ÌiÌ Apply test voltage for 60±5 min. at test temperature. Remove and let sit for 24±2 hrs. at room condition.* * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Product Information 172 Oct.1,2012 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors Part Number GA355D W Dimensions (mm) W T e min. 5.0 ±0.4 2.0 ±0.3 0.3 L 5.7 ±0.4 g min. 4.0 c Standard Certification UL 1. Ideal for use as Y capacitor or X capacitor for various switching power supplies 2. Ideal for modem applications Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Standard No. Class UL1414 Line By-pass VDE IEC 60384-14 EN 60384-14 BSI EN 60065 (14.2) IEC 60384-14 EN 60384-14 SEMKO IEC 60384-14 EN 60384-14 ESTI IEC 60384-14 Rated Voltage AC250V (r.m.s.) X1, Y2 Safety Standard Certified GA3 Series c Applications Rated Voltage TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GA355DR7GC101KY02L 250Vac(r.m.s.) X7R (EIA) 100pF±10% 5.7 5.0 2.3 4.0mm 0.3mm min. GA355DR7GC151KY02L 250Vac(r.m.s.) X7R (EIA) 150pF±10% 5.7 5.0 2.3 4.0mm 0.3mm min. GA355DR7GC221KY02L 250Vac(r.m.s.) X7R (EIA) 220pF±10% 5.7 5.0 2.3 4.0mm 0.3mm min. GA355DR7GC331KY02L 250Vac(r.m.s.) X7R (EIA) 330pF±10% 5.7 5.0 2.3 4.0mm 0.3mm min. Part Number Only for Applications L AC250V Type GA2 Series e T 1. Chip monolithic ceramic capacitor (certified as conforming to safety standards) for AC lines. 2. A new monolithic structure for small, high capacitance capable of operating at high voltage levels. 3. Compared to lead type capacitors, this new capacitor is greatly downsized and low-profiled to 1/10 or less in volume, and 1/4 or less in height. 4. Type GC can be used as an X1-class and Y2-class capacitor, line-by-pass capacitor of UL1414. 5. +125 degree C guaranteed 6. Only for reflow soldering g 173 Product Information e c Features For General Purpose GRM/GRJ/GR3 Series Safety Standard Certified GA3 Series UL, IEC60384-14 Class X1/Y2 Type GC C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors Safety Standard Certified GA3 Series IEC60384-14 Class Y2, X1/Y2 Type GF g e c Features Only for Applications 1. Available for equipment based on IEC/EN60950 and UL1950. Besides, the GA352/355 types are available for equipment based on IEC/EN60065, UL1492, and UL6500. 2. Type GF can be used as a Y2-class capacitor. 3. A new monolithic structure for small, high capacitance capable of operating at high voltage levels. 4. +125 degree C guaranteed 5. Only for reflow soldering T For General Purpose GRM/GRJ/GR3 Series e L Part Number GA342A GA342D GA342Q GA352Q GA355D GA355Q L W Dimensions (mm) T 1.0 +0, -0.3 2.0 ±0.2 2.0 ±0.2 1.5 +0, -0.3 2.8 ±0.3 1.5 +0, -0.3 2.0 +0, -0.3 5.0 ±0.4 1.5 +0, -0.3 W 4.5 ±0.3 5.7 ±0.4 e min. g min. 2.5 0.3 4.0 AC250V Type GA2 Series c Standard Certification c Applications Safety Standard Certified GA3 Series 1. Ideal for use on line filters and couplings for DAA modems without transformers 2. Ideal for use on line filters for information equipment 3. Ideal for use as Y capacitor or X capacitor for various switching power supplies (GA352/355 types only) UL Status of Certification Standard No. Class UL1414 X1, Y2 UL 60950-1 – Size : 4.5x2.0mm Rated Size : 5.7x2.8mm Voltage and over – – VDE – IEC 60384-14 X1, Y2 SEMKO EN 60384-14 Y2 AC250V (r.m.s.) Applications Product Information Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Size Switching power supplies 4.5x2.0mm – Communication network devices such as a modem 5.7x2.8mm and over Rated Voltage TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GA342D1XGF100JY02L 250Vac(r.m.s.) SL (JIS) 10pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min. GA342D1XGF120JY02L 250Vac(r.m.s.) SL (JIS) 12pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min. GA342D1XGF150JY02L 250Vac(r.m.s.) SL (JIS) 15pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min. GA342D1XGF180JY02L 250Vac(r.m.s.) SL (JIS) 18pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min. GA342D1XGF220JY02L 250Vac(r.m.s.) SL (JIS) 22pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min. GA342A1XGF270JW31L 250Vac(r.m.s.) SL (JIS) 27pF±5% 4.5 2.0 1 2.5mm 0.3mm min. GA342A1XGF330JW31L 250Vac(r.m.s.) SL (JIS) 33pF±5% 4.5 2.0 1 2.5mm 0.3mm min. GA342A1XGF390JW31L 250Vac(r.m.s.) SL (JIS) 39pF±5% 4.5 2.0 1 2.5mm 0.3mm min. GA342A1XGF470JW31L 250Vac(r.m.s.) SL (JIS) 47pF±5% 4.5 2.0 1 2.5mm 0.3mm min. GA342A1XGF560JW31L 250Vac(r.m.s.) SL (JIS) 56pF±5% 4.5 2.0 1 2.5mm 0.3mm min. GA342A1XGF680JW31L 250Vac(r.m.s.) SL (JIS) 68pF±5% 4.5 2.0 1 2.5mm 0.3mm min. GA342A1XGF820JW31L 250Vac(r.m.s.) SL (JIS) 82pF±5% 4.5 2.0 1 2.5mm 0.3mm min. GA342QR7GF101KW01L 250Vac(r.m.s.) X7R (EIA) 100pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min. GA342QR7GF151KW01L 250Vac(r.m.s.) X7R (EIA) 150pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min. GA342DR7GF221KW02L 250Vac(r.m.s.) X7R (EIA) 220pF±10% 4.5 2.0 2.2 2.5mm 0.3mm min. GA342DR7GF331KW02L 250Vac(r.m.s.) X7R (EIA) 330pF±10% 4.5 2.0 2.2 2.5mm 0.3mm min. GA342QR7GF471KW01L 250Vac(r.m.s.) X7R (EIA) 470pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min. GA352QR7GF471KW01L 250Vac(r.m.s.) X7R (EIA) 470pF±10% 5.7 2.8 1.5 4.0mm 0.3mm min. GA342QR7GF681KW01L 250Vac(r.m.s.) X7R (EIA) 680pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min. GA352QR7GF681KW01L 250Vac(r.m.s.) X7R (EIA) 680pF±10% 5.7 2.8 1.5 4.0mm 0.3mm min. GA342DR7GF102KW02L 250Vac(r.m.s.) X7R (EIA) 1000pF±10% 4.5 2.0 2.2 2.5mm 0.3mm min. GA352QR7GF102KW01L 250Vac(r.m.s.) X7R (EIA) 1000pF±10% 5.7 2.8 1.5 4.0mm 0.3mm min. Part Number Continued on the following page. 174 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GA352QR7GF152KW01L 250Vac(r.m.s.) X7R (EIA) 1500pF±10% 5.7 2.8 1.5 4.0mm 0.3mm min. GA355QR7GF182KW01L 250Vac(r.m.s.) X7R (EIA) 1800pF±10% 5.7 5.0 1.5 4.0mm 0.3mm min. GA355QR7GF222KW01L 250Vac(r.m.s.) X7R (EIA) 2200pF±10% 5.7 5.0 1.5 4.0mm 0.3mm min. GA355QR7GF332KW01L 250Vac(r.m.s.) X7R (EIA) 3300pF±10% 5.7 5.0 1.5 4.0mm 0.3mm min. GA355DR7GF472KW01L 250Vac(r.m.s.) X7R (EIA) 4700pF±10% 5.7 5.0 2 4.0mm 0.3mm min. Product Information Safety Standard Certified GA3 Series AC250V Type GA2 Series Only for Applications Rated Voltage Part Number For General Purpose GRM/GRJ/GR3 Series Continued from the preceding page. 175 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors Safety Standard Certified GA3 Series IEC60384-14 Class Y3 Type GD g e Only for Applications 1. Available for equipment based on IEC/EN60950 and UL1950. 2. Type GD can be used as a Y3-class capacitor. 3. A new monolithic structure for small, high capacitance capable of operating at high voltage levels. 4. +125 degree C guaranteed 5. Only for reflow soldering T For General Purpose GRM/GRJ/GR3 Series e c Features L Part Number GA342A GA342D GA342Q GA343D GA343Q c Applications AC250V Type GA2 Series 1. Ideal for use on line filters and couplings for DAA modems without transformers 2. Ideal for use on line filters for information equipment W Dimensions (mm) T 1.0 +0, -0.3 2.0 ±0.2 2.0 ±0.2 1.5 +0, -0.3 2.0 +0, -0.3 3.2 ±0.3 1.5 +0, -0.3 L W 4.5 ±0.3 4.5 ±0.4 e min. g min. 0.3 2.5 c Standard Certification Standard No. Class UL 60950-1 – IEC 60384-14 EN 60384-14 Y3 UL SEMKO Safety Standard Certified GA3 Series Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Rated Voltage AC250V(r.m.s.) Applications Size Switching power supplies 4.5x3.2mm and under – Communication network devices such as a modem Product Information Rated Voltage TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GA342D1XGD100JY02L 250Vac(r.m.s.) SL (JIS) 10pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min. GA342D1XGD120JY02L 250Vac(r.m.s.) SL (JIS) 12pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min. GA342D1XGD150JY02L 250Vac(r.m.s.) SL (JIS) 15pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min. GA342D1XGD180JY02L 250Vac(r.m.s.) SL (JIS) 18pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min. GA342D1XGD220JY02L 250Vac(r.m.s.) SL (JIS) 22pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min. GA342A1XGD270JW31L 250Vac(r.m.s.) SL (JIS) 27pF±5% 4.5 2.0 1 2.5mm 0.3mm min. GA342A1XGD330JW31L 250Vac(r.m.s.) SL (JIS) 33pF±5% 4.5 2.0 1 2.5mm 0.3mm min. GA342A1XGD390JW31L 250Vac(r.m.s.) SL (JIS) 39pF±5% 4.5 2.0 1 2.5mm 0.3mm min. GA342A1XGD470JW31L 250Vac(r.m.s.) SL (JIS) 47pF±5% 4.5 2.0 1 2.5mm 0.3mm min. GA342A1XGD560JW31L 250Vac(r.m.s.) SL (JIS) 56pF±5% 4.5 2.0 1 2.5mm 0.3mm min. GA342A1XGD680JW31L 250Vac(r.m.s.) SL (JIS) 68pF±5% 4.5 2.0 1 2.5mm 0.3mm min. GA342A1XGD820JW31L 250Vac(r.m.s.) SL (JIS) 82pF±5% 4.5 2.0 1 2.5mm 0.3mm min. GA342QR7GD101KW01L 250Vac(r.m.s.) X7R (EIA) 100pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min. GA342QR7GD151KW01L 250Vac(r.m.s.) X7R (EIA) 150pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min. GA342QR7GD221KW01L 250Vac(r.m.s.) X7R (EIA) 220pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min. GA342QR7GD331KW01L 250Vac(r.m.s.) X7R (EIA) 330pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min. GA342QR7GD471KW01L 250Vac(r.m.s.) X7R (EIA) 470pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min. GA342QR7GD681KW01L 250Vac(r.m.s.) X7R (EIA) 680pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min. GA342QR7GD102KW01L 250Vac(r.m.s.) X7R (EIA) 1000pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min. GA342QR7GD152KW01L 250Vac(r.m.s.) X7R (EIA) 1500pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min. GA343QR7GD182KW01L 250Vac(r.m.s.) X7R (EIA) 1800pF±10% 4.5 3.2 1.5 2.5mm 0.3mm min. GA343QR7GD222KW01L 250Vac(r.m.s.) X7R (EIA) 2200pF±10% 4.5 3.2 1.5 2.5mm 0.3mm min. GA343DR7GD472KW01L 250Vac(r.m.s.) X7R (EIA) 4700pF±10% 4.5 3.2 2 2.5mm 0.3mm min. Part Number 176 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Chip Monolithic Ceramic Capacitors e T L Part Number GA355Q GA355D GA355E GA355X W Dimensions (mm) W T e min. 1.5 +0,-0.3 2.0 +0,-0.3 5.0 ±0.4 0.3 2.5 +0,-0.3 2.9 +0,-0.4 L 5.7 ±0.4 g min. 3.0 c Standard Certification c Applications Standard No. Class Rated Voltage SEMKO IEC 60384-14 EN 60384-14 X2 AC250V (r.m.s.) ESTI IEC 60384-14 VDE Do not use these products in any Automotive Power train or Safety equipment including Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile applications such as Power train and Safety equipment. Safety Standard Certified GA3 Series Ideal for use as X capacitor for various switching power supplies Only for Applications 1. Type GB can be used as an X2-class capacitor. 2. Chip monolithic ceramic capacitor (certified as conforming to safety standards) for AC lines. 3. A new monolithic structure for small, high capacitance capable of operating at high voltage levels. 4. Compared to lead type capacitors, this new capacitor is greatly downsized and low-profiled to 1/10 or less in volume, and 1/4 or less in height. 5. +125 degree C guaranteed 6. Only for reflow soldering AC250V Type GA2 Series g c Features Part Number Rated Voltage TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Electrode g min. Electrode e GA355QR7GB103KW01L 250Vac(r.m.s.) X7R (EIA) 10000pF±10% 5.7 5.0 1.5 3.0mm 0.3mm min. GA355QR7GB153KW01L 250Vac(r.m.s.) X7R (EIA) 15000pF±10% 5.7 5.0 1.5 3.0mm 0.3mm min. GA355DR7GB223KW01L 250Vac(r.m.s.) X7R (EIA) 22000pF±10% 5.7 5.0 2 3.0mm 0.3mm min. GA355ER7GB333KW01L 250Vac(r.m.s.) X7R (EIA) 33000pF±10% 5.7 5.0 2.5 3.0mm 0.3mm min. GA355ER7GB473KW01L 250Vac(r.m.s.) X7R (EIA) 47000pF±10% 5.7 5.0 2.5 3.0mm 0.3mm min. GA355XR7GB563KW06L 250Vac(r.m.s.) X7R (EIA) 56000pF±10% 5.7 5.0 2.9 3.0mm 0.3mm min. 177 Product Information e For General Purpose GRM/GRJ/GR3 Series Safety Standard Certified GA3 Series IEC60384-14 Class X2 Type GB C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GA3 Series Specifications and Test Methods For General Purpose GRM/GRJ/GR3 Series No. Item Specifications Test Method 1 Operating Temperature Range –55 to +125°C 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers – No failure should be observed when voltage in the table is applied between the terminations for 60±1 sec., provided the charge/discharge current is less than 50mA. 4 Dielectric Strength No defects or abnormalities Only for Applications /iÃÌÊ6Ì>}i DC1075V AC1500V (r.m.s.) AC2000V (r.m.s.) Type GB Type GC/GD Type GF AC250V Type GA2 Series 5 *ÕÃiÊ6Ì>}i (Application: Type GD/GF) No self healing breakdowns or flash-overs have taken place in the capacitor. 10 impulses of alternating polarity are subjected. (5 impulses for each polarity) The interval between impulses is 60 sec. Applied Pulse: 1.2/50μs Applied Voltage: 2.5kVo-p 6 Insulation Resistance (I.R.) More than 6,000MΩ The insulation resistance should be measured with DC500±50V and within 60±5 sec. of charging. Ç Capacitance Within the specified tolerance 8 Dissipation Factor (D.F.) Q Char. X7R SL Specification D.F.V0.025 QU400+20C*2 (CF30pF) QU1000 (CU30pF) The capacitance/Q/D.F. should be measured at a frequency of 1±0.2kHz (SL char.: 1±0.2MHz) and a voltage of AC1±0.2V (r.m.s.). Safety Standard Certified GA3 Series The capacitance measurement should be made at each step specified in the Table. 9 Capacitance Temperature Characteristics Char. Capacitance Change X7R Within ±15% Temperature characteristic guarantee is –55 to +125°C Char. Temperature Coefficient SL +350 to –1000ppm/°C Temperature characteristic guarantee is +20 to +85°C Product Information Appearance No defects or abnormalities I.R. More than 1,000MΩ Step 1 2 3 4 5 Temperature (°C) 25±2 (20±2 for SL char.) Min. Operating Temp.±3 25±2 (20±2 for SL char.) Max. Operating Temp.±2 25±2 (20±2 for SL char.) SL char. : The capacitance should be measured at even 85°C between step 3 and step 4. U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊV >À° W 0 Perform a heat treatment at 150Y10 °C for 60±5 min. and then let sit for 24±2 hrs. at room condition.*1 As in Fig., discharge is made 50 times at 5 sec. intervals from the capacitor (Cd) charged at DC voltage of specified. R3 Discharge Test 10 (Application: Type GC) Dielectric Strength 10kV In accordance with item No.4 R1 V Ct R2 Cd Ct: Capacitor under test Cd: 0.001μF R1: 1,000Ω R2: 100MΩ R3: Surge resistance 11 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10±1s Glass Epoxy Board Fig. 1 *1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). Continued on the following page. 178 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GA3 Series Specifications and Test Methods Continued from the preceding page. 6LÀ>ÌÊ ,iÃÃÌ>Vi °° Q Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). Within the specified tolerance >À° X7R -«iVvV>Ì D.F.V0.025 QU400+20C*2 (CF30pF) QU1000 (CU30pF) SL Solder resist Cu Glass Epoxy Board No marking defects Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. b ø4.5 40 d c a 13 iviVÌ Fig. 2 LZW ® 4.5Z2.0 4.5Z3.2 5.7Z2.8 5.7Z5.0 14 20 50 Pressurizing speed: 1.0mm/s Pressurize t : 1.6 100 -`iÀ>LÌÞÊvÊ /iÀ>Ì ««i>À>Vi >«>VÌ>ViÊ >}i ,iÃÃÌ>ViÊ 15 ÌÊ-`iÀ}Ê °,° i>Ì iiVÌÀVÊ -ÌÀi}Ì > 3.5 3.5 4.5 4.5 iÃÊ® L V 7.0 2.4 7.0 3.7 8.0 3.2 8.0 5.6 R230 >À° X7R SL >«>VÌ>ViÊ >}i Within ±10% Within ±2.5% or ±0.25pF (Whichever is larger) More than 1,000MΩ Flexure=1 ` Capacitance meter 45 1.0 75% of the terminations are to be soldered evenly and continuously. No marking defects 45 (in mm) Fig. 3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in solder solution for 2±0.5 sec. Immersing speed: 25±2.5mm/s Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu) 235±5°C H60A or H63A Eutectic Solder Preheat the capacitor as in table. Immerse the capacitor in solder solution at 260±5°C for 10±1 sec. Let sit at room condition*1 for 24±2 hrs., then measure. UiÀÃ}Êëii`: 25±2.5mm/s U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊV >À° W 0 Perform a heat treatment at 150Y10 °C for 60±5 min. and then let sit for 24±2 hrs. at room condition.*1 **Ài i>Ì} In accordance with item No.4 For General Purpose GRM/GRJ/GR3 Series 12 No defects or abnormalities Only for Applications >«>VÌ>Vi /iÃÌÊiÌ ` AC250V Type GA2 Series ««i>À>Vi -«iVvV>Ìà -Ìi« 1 2 /i«iÀ>ÌÕÀi 100 to 120°C 170 to 200°C /i 1 min. 1 min. *1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). Continued on the following page. 179 Safety Standard Certified GA3 Series Ìi Product Information ° C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GA3 Series Specifications and Test Methods Continued from the preceding page. ° Ìi For General Purpose GRM/GRJ/GR3 Series ««i>À>Vi >«>VÌ>ViÊ >}i °° Q Only for Applications 16 /i«iÀ>ÌÕÀiÊ ÞVi -«iVvV>Ìà No marking defects >À° X7R SL >À° X7R SL >«>VÌ>ViÊ >}i Within ±15% Within ±2.5% or ±0.25pF (Whichever is larger) -«iVvV>Ì D.F.V0.05 QU400+20C*2 (CF30pF) QU1000 (CU30pF) °,° More than 3,000MΩ iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 /iÃÌÊiÌ ` Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 5 cycles according to the 4 heat treatments listed in the following table. Let sit for 24±2 hrs. at room condition,*1 then measure. -Ìi« 1 2 3 4 /i«iÀ>ÌÕÀiÊc ® Min. Operating Temp.±3 Room Temp. Max. Operating Temp.±2 Room Temp. /iÊ°® 30±3 2 to 3 30±3 2 to 3 U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊV >À° 0 Perform a heat treatment at 150W Y10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.*1 Solder resist Cu Glass Epoxy Board AC250V Type GA2 Series Fig. 4 ««i>À>Vi >«>VÌ>ViÊ >}i Safety Standard Certified GA3 Series Õ`ÌÞÊ £Ç -Ìi>`ÞÊ Ê-Ì>Ìi® °° Q >À° X7R SL >À° X7R SL >«>VÌ>ViÊ >}i Within ±15% Within ±5.0% or ±0.5pF (Whichever is larger) -«iVvV>Ì D.F.V0.05 QU275+5/2C*2 (CF30pF) QU350 (CU30pF) °,° More than 3,000MΩ iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 ««i>À>Vi No marking defects Product Information >«>VÌ>ViÊ >}i °° Q 18 vi No marking defects °,° >À° X7R SL >À° X7R SL >«>VÌ>ViÊ >}i Within ±20% Within ±3.0% or ±0.3pF (Whichever is larger) -«iVvV>Ì D.F.V0.05 QU275+5/2C*2 (CF30pF) QU350 (CU30pF) More than 3,000MΩ Before this test, the test shown in the following is performed. ·Item 11 Adhesive Strength of Termination (applied force is 5N) ·Item 13 Deflection Let the capacitor sit at 40±2°C and relative humidity of 90 to 95% W24 for 500Y 0 hrs. Remove and let sit for 24±2 hrs. at room condition,*1 then measure. U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊV >À° 0 Perform a heat treatment at 150W Y10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.*1 Before this test, the test shown in the following is performed. ·Item 11 Adhesive Strength of Termination (apply force is 5N) ·Item 13 Deflection Impulse Voltage Each individual capacitor should be subjected to a 2.5kV (Type GC/GF: 5kV) Impulse (the voltage value means zero to peak) for three times. Then the capacitors are applied to life test. GB In accordance with item No.4 100 90 50 (%) 30 0 t T T1 T2 Apply voltage as in Table for 1,000 hrs. at 125W2 Y0°C, relative humidity 50% max. /Þ«i iiVÌÀVÊ -ÌÀi}Ì Front time (T1)=1.2μs=1.67T Time to half-value (T2)=50μs GC GD ««i`Ê6Ì>}i AC312.5V (r.m.s.), except that once each hour the voltage is increased to AC1,000V (r.m.s.) for 0.1 sec. AC425V (r.m.s.), except that once each hour the voltage is increased to AC1,000V (r.m.s.) for 0.1 sec. Let sit for 24±2 hrs. at room condition,*1 then measure. U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊV >À° 0 Perform a heat treatment at 150W Y10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.*1 *1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). Continued on the following page. 180 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GA3 Series Specifications and Test Methods Continued from the preceding page. Humidity >`} °° Q No marking defects >À° X7R SL >À° X7R SL >«>VÌ>ViÊ >}i Within ±15% Within ±5.0% or ±0.5pF (Whichever is larger) -«iVvV>Ì D.F.V0.05 QU275+5/2C*2 (CF30pF) QU350 (CU30pF) °,° More than 3,000MΩ iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 Before this test, the test shown in the following is performed. ·Item 11 Adhesive Strength of Termination (apply force is 5N) ·Item 13 Deflection Apply the rated voltage at 40±2°C and relative humidity of 90 to W24 95% for 500Y 0 hrs. Remove and let sit for 24±2 hrs. at room 1 condition,* then measure. U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊV >À° 0 Perform a heat treatment at 150W Y10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.*1 The capacitor should be individually wrapped in at least one but not more than two complete layers of cheesecloth. The capacitor should be subjected to 20 discharges. The interval between successive discharges should be 5 sec. The UAC should be maintained for 2 min. after the last discharge. F S1 Tr S2 C1 UAC L1 R L2 C2 C3 L3 Cx Ct Ut L4 For General Purpose GRM/GRJ/GR3 Series >«>VÌ>ViÊ >}i /iÃÌÊiÌ ` Only for Applications ««i>À>Vi 19 -«iVvV>Ìà Item AC250V Type GA2 Series ° The cheesecloth should not be on fire. C1,2 L1 to 4 Ct Cx F : 1μF±10% C3 : 0.033μF±5% 10kV : 1.5mH±20% 16A Rod core choke : 3μF±5% 10kV R : 100Ω±2% : Capacitor under test UAC : UR±5% : Rated Voltage : Fuse, Rated 16A UR : Voltage applied to Ct Ut Ux Type GD, GB GC, GF Ui Ui 2.5kV 5kV time The burning time should not exceed 30 sec. The tissue paper should not ignite. Test Specimen 45° 200±5mm Passive Flammability About 8mm 21 The capacitor under test should be held in the flame in the position which best promotes burning. Each specimen should be exposed to the flame only once. Time of exposure to flame: 30 sec. Length of flame : 12±1mm Gas burner : Length 35mm min. Inside Dia. 0.5±0.1mm Outside Dia. 0.9mm max. Gas : Butane gas Purity 95% min. Tissue About 10mm Thick Board *1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa *2 "C" expresses nominal capacitance value (pF). 181 Product Information Active Flammability Safety Standard Certified GA3 Series Oscilloscope 20 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM/GRJ/GR3/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example) c Capacitance - Temperature Characteristics C0G/U2J/SL Characteristics X7R Characteristics For General Purpose GRM/GRJ/GR3 Series 20 30 15 20 U2J X7R Char. Spec.(upper) 5 C0G SL 0 U2J C0G –5 Cap. Change (%) Cap. Change (%) 10 10 0 -10 Only for Applications –10 SL –20 –60 X7R Char. Spec.(lower) -20 –15 –40 –20 0 20 40 60 80 -30 -60 100 120 140 -40 -20 0 20 40 60 80 100 120 140 Temperature (°C) Temperature (°C) GR4 Series X7T Characteristics 30 20 AC250V Type GA2 Series 15 20 Cap. Change (%) Cap. Change (%) 10 5 0 -5 10 0 Safety Standard Certified GA3 Series –10 –10 –20 –15 –20 –60 –40 –20 0 20 40 60 80 –30 –60 100 120 140 –40 –20 0 Temperature (°C) 20 40 60 80 100 120 140 Temperature (°C) GRM Series (C0G Char. 250V) GRM Series (C0G Char. 630V) 100k 10k 10k 1k 22pF 10pF 1k 47pF 100pF Z (Ω) 100 Z (Ω) Product Information Reference Data c Impedance - Frequency Characteristics 47pF 100 10 10 1 100m 1M 10pF 470pF 100pF 1000pF 1 10M 100M Frequency (Hz) 1G 10G 100m 1M 10M 100M 1G 10G Frequency (Hz) Continued on the following page. 182 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM/GRJ/GR3/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example) Continued from the preceding page. c Impedance - Frequency Characteristics GRM Series (X7R Char. 250V) For General Purpose GRM/GRJ/GR3 Series GRM Series (C0G Char. 1kV) 100k 1k 10k 100 10pF 1000pF 1k 10 Z (Ω) Z (Ω) 22pF 47pF 100 10000pF 100000pF 100pF 1 100m 1 10M 100M 1G 10m 1M 10G 10M Frequency (Hz) 100M 1G Frequency (Hz) GRM Series (X7R Char. 630V) GRJ Series (X7R Char. 250V) 100 1k (1) (2) 100 10 (3) (1) GRJ21AR72E102KWJ1D (2) GRJ21BR72E103KWJ3L (3) GRJ31BR72E223KWJ1L (4) GRJ31CR72E473KWJ3L (5) GRJ31CR72E104KWJ3L (6) GRJ55DR72E105KWJ1L (4) 100000pF Z (Ω) 10 10000pF (5) 1 1 Safety Standard Certified GA3 Series 1000pF (6) 0.1 100m 10M 100M Frequency (Hz) 1G 0.01 1M 10M 100M 1G Frequency (Hz) GR3 Series (X7T Char. 250V) GR4 Series 1k 100 (1) 100 10 (1) GR321AD72E103KW01D (2) GR332QD72E104KW01L (3) GR355XD72E105KW05L (2) 1 100pF 1000pF 10 Z (Ω) Z (Ω) Product Information Reference Data 10m 1M 4700pF 1 (3) 0.1 100m 0.01 1M 10M 100M 10m 1M 1G 10M Frequency (Hz) GA3 Series (Type GF) 1k 1K 100 100 1000pF 1000pF 10 Z (Ω) 10 Z (Ω) 1G Frequency (Hz) GA2 Series 10000pF 100000pF 2200pF 1 1 100m 100m 10m 1M 100M 10m 1M 10M 100M Frequency (Hz) 1G 10M 100M AC250V Type GA2 Series 100m 1M Z (Ω) Only for Applications 10 1G Frequency (Hz) Continued on the following page. 183 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 GRM/GRJ/GR3/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example) Continued from the preceding page. c Impedance - Frequency Characteristics GA3 Series (Type GD) GA3 Series (Type GB) For General Purpose GRM/GRJ/GR3 Series 100 1K 150pF 100 10 1000pF 10000pF Z (Ω) Z (Ω) 10 2200pF 1 1 Only for Applications 56000pF 0.1 100m 33000pF 10m 1M 10M 100M 0.01 1M 1G 10M 100M 1G Frequency (Hz) Frequency (Hz) c Capacitance - AC Voltage Characteristics GA3 Series (Type GF/GD, X7R Char.) GA3 Series (Type GB) AC250V Type GA2 Series at Room Condition (25°C) 60 40 40 20 20 Cap. Change (%) Safety Standard Certified GA3 Series Cap. Change (%) at Room Condition (25°C) 60 0 -20 33000pF 0 56000pF -20 -40 -40 -60 10000pF 500 0 1000 1500 -60 2000 0 50 100 150 200 250 300 AC Voltage [V(r.m.s.)] AC Voltage [V(r.m.s.)] GRM/GR3 Series GR7 Series 20 20 0 0 -20 -20 (2) (1) GRM55DR72E105KW01L (2) GR355XD72E105KW05L -40 -60 Cap. Change (%) Cap. Change (%) Product Information Reference Data c Capacitance - DC Bias Characteristics (1) GR721AW0BB103KW01D GR721AW0BB153KW01D GR721BW0BB223KW03L GR731AW0BB223KW01D GR721BW0BB273KW03L GR731AW0BB273KW01D GR731AW0BB333KW01D (2) -40 (1) -60 (2) GR731AW0BB103KW01D GR731AW0BB153KW01D GR731BW0BB223KW01L GR731BW0BB333KW01L GR731CW0BB473KW03L (1) -80 -100 -80 0 50 100 150 DC Bias (V) 184 200 250 -100 0 50 100 150 200 DC Bias (V) 250 300 350 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Package Taping is the standard packaging method. 1.6 0.8 0.8 4,000 - GRJ21/GRM21/GR321/ GR721 2.0 1.25 GRJ31/GRM31/GR331/ GR731 3.2 1.6 GRM42/GR442 4.5 4.5 2.5 2.0 3.2 4,000 - - 3,000 1.0 4,000 - 1.25 - 3,000 1.6 - 2,000 1.0 4,000 - 1.25 - 3,000 1.5 - 2,000 2.0 - 1,000 1.0 - 3,000 1.5 - 2,000 1.5 - 1,000 2.0 - 1,000 2.5 - 500 GRM55 5.7 5.0 1.5 - 1,000 GRJ55/GRM55/GR355/ GR455 5.7 5.0 2.0 - 1,000 GR355 5.7 5.0 2.7 - 500 GA242 4.5 2.0 1.5 - 2,000 GA243 4.5 3.2 1.5 - 1,000 2.0 - 1,000 GA255 5.7 5.0 2.0 - 1,000 1.0 - 3,000 1.5 - 2,000 2.0 - 2,000 1.5 - 1,000 2.0 - 1,000 1.5 - 1,000 1.5 - 1,000 2.0 - 1,000 2.5 - 500 2.7 - 500 2.9 - GA342 Safety Std. Certification 3.2 1.0 1.25 4.5 2.0 GA343 4.5 3.2 GA352 5.7 2.8 GA355 5.7 5.0 Only for Applications Embossed Tape GRM18 AC250V Type GA2 Series Paper Tape Safety Standard Certified GA3 Series T Product Information Package W GRJ43/GRM43/GR343/ GR443 AC250V ø180mm Reel L GRJ32/GRM32/GR332 250Vdc min. For General Purpose & Only for Applications Quantity (pcs.) Dimensions (mm) Part Number For General Purpose GRM/GRJ/GR3 Series c Minimum Quantity Guide 500 Continued on the following page. 185 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Package Continued from the preceding page. c Tape Carrier Packaging w Paper Tape Cover Tape: 0.06mm in thickness Top Tape: 0.05mm in thickness Sprocket Hole: As specified in (2) Sprocket Hole: As specified in (2) Cavity for Chip: As specified in (2) Cavity for Chip: As specified in (2) Only for Applications Bottom Tape: 0.05mm in thickness Base Tape: As specified in (2) Packed Chips Chip Base Tape: As specified in (2) Packed Chips Chip 8mm width, 4mm pitch Tape 12mm width, 8mm/4mm pitch Tape W0.1 1.75±0.1 Product Information Package Direction of Feed GRJ21/GRM21/GR321/GR721 (TU1.25mm) GRJ31/GRM31/GR331/GR731 (TU1.25mm) GRJ32/GRM32/GR332 (TU1.25mm) A Direction of Feed B* 1.45 0.3±0.1 1.75±0.1 4.0±0.1 2.5 max. A* ø1.5Y0 B B A Part Number 2.0±0.05 2.25 2.0 3.6 2.9 3.6 12.0±0.3 2.0±0.05 8.0±0.1*1 8.0±0.3 4.0±0.1 0.25±0.1 3.5±0.05 Safety Standard Certified GA3 Series 4.0±0.05 W0.1 ø1.5Y0 3.7 max. Part Number A* B* GRM42/GR442/GA242/GA342 2.5 5.1 GRJ43/GRM43/GR343/GR443/GA243/GA343 3.6 4.9 GA352 3.2 6.1 GRJ55/GRM55/GR355/GR455/GA255/GA355 5.4 6.1 *1 4.0±0.1mm in case of GRM42/GR442/GA242/GA342 *Nominal Value *Nominal Value (in mm) w Paper Tape 8mm width, 4mm pitch Tape 4.0±0.1 W0.1 ø1.5Y0 2.0±0.05 B A Direction of Feed A* B* GRM18 Part Number 1.05 1.85 GRJ21/GRM21/GR321/GR721 (T=1.0mm) 1.45 2.25 GRM31/GR331/GR731 (T=1.0mm) 2.0 3.6 GRM32 (T=1.0mm) 2.9 3.6 1.1 max. 1.75±0.1 8.0±0.3 4.0±0.1 3.5±0.05 AC250V Type GA2 Series (2) Dimensions of Tape q Embossed Tape 5.5±0.05 For General Purpose GRM/GRJ/GR3 Series (1) Appearance of Taping q Embossed Tape *Nominal Value (in mm) Continued on the following page. 186 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Package Continued from the preceding page. (3) Dimensions of Reel For General Purpose GRM/GRJ/GR3 Series 13.0±1.0 (Tape width 8mm) 17.0±1.0 (Tape width 12mm) 2.0±0.5 180 +0 -1.5 Only for Applications ø21±0.8 +1.0 9.0 -0 (Tape width 8mm) +1.0 13.0 -0 (Tape width 12mm) Vacant section Chip mounting unit Vacant section 160 min. 190 min. 210 min. (Top Tape or Cover Tape alone) Direction of feed (in mm) Product Information Package (4) Taping Method q Tapes for capacitors are wound clockwise. The sprocket holes are to the right as the tape is pulled toward the user. w Part of the leader and part of the empty tape should be attached to the end of the tape as shown at right. e The top tape or cover tape and base tape are not attached at the end of the tape for a minimum of 5 pitches. r Missing capacitors number within 0.1% of the number per reel or 1 pc, whichever is greater, and are not continuous. t The top tape or cover tape and bottom tape should not protrude beyond the edges of the tape and should not cover sprocket holes. y Cumulative tolerance of sprocket holes, 10 pitches: ±0.3mm. u Peeling off force: 0.1 to 0.6N in the direction shown at right. AC250V Type GA2 Series (in mm) Safety Standard Certified GA3 Series +1 60 -0 ø13±0.2 165 to 180° Top Tape or Cover Tape Base Tape 187 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution/Notice For General Purpose GRM/GRJ/GR3 Series !Caution Notice c Storage and Operation Conditions ........................ 189 c Rating .................................................................... 195 1. Capacitance Change of Capacitor..................... 195 c Rating .................................................................... 189 2. Performance Check by Equipment .................... 195 1. Operating Voltage.............................................. 189 Only for Applications 2. Operating Temperature, Self-generated Heat, and Load Reduction at High-frequency Voltage Condition ........................................................... 189 c Soldering and Mounting ........................................ 195 3. Fail-safe ............................................................. 191 2. Mounting of Chips.............................................. 196 4. Test Condition for AC Withstanding Voltage ..... 191 3. Soldering ........................................................... 197 (1) Test Equipment ............................................ 191 (1) Limit of losing effective area of the terminations and conditions needed for soldering. ................................................ 197 AC250V Type GA2 Series (2) Voltage Applied Method ............................... 191 1. Construction of Board Pattern ........................... 195 (2) Flux Application ............................................ 197 c Soldering and Mounting ........................................ 191 (3) Solder ........................................................... 197 1. Vibration and Impact.......................................... 191 4. Cleaning ............................................................ 197 Safety Standard Certified GA3 Series 2. Circuit Board Material ........................................ 191 5. Resin Coating .................................................... 197 Product Information !Caution/Notice 7. Washing............................................................. 194 3. Land Layout for Cropping PC Board ................. 191 4. Reflow Soldering ............................................... 192 5. Flow Soldering ................................................... 193 6. Correction with a Soldering Iron ........................ 194 8. Handling ............................................................ 194 188 C02E.pdf Oct.1,2012 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution c Storage and Operation Conditions Only for Applications For General Purpose GRM/GRJ/GR3 Series Do not use or store capacitors in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. In addition, avoid exposure to moisture. Before cleaning, bonding or molding this product, verify that these processes do not affect product quality by testing the performance of a cleaned, bonded or molded product in the intended equipment. Store the capacitors where the temperature and relative humidity do not exceed 5 to 40 degrees centigrade and 20 to 70%. Use capacitors within 6 months of delivery. Check the solderability after 6 months or more. Positional Measurement DC Voltage V0-p DC+AC Voltage V0-p AC Voltage Vp-p Pulse Voltage (1) Vp-p Pulse Voltage (2) Safety Standard Certified GA3 Series Voltage When DC-rated capacitors are to be used in input circuits from a commercial power source (AC filter), be sure to use Safety Certified Capacitors because various regulations for withstanding voltage or impulses, established for all equipment, should be taken into consideration. Product Information !Caution 1. Operating Voltage When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p value of the applied voltage or the Vo-p which contains DC bias within the rated voltage range. When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these irregular voltages. AC250V Type GA2 Series c Rating Vp-p 2. Operating Temperature, Self-generated Heat, and Load Reduction at High-frequency Voltage Condition Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a highfrequency voltage, pulse voltage, it may self-generate heat due to dielectric loss. (1) In the case of X7R, X7T char. Applied voltage should be the load such as selfgenerated heat is within 20°C on the condition of atmosphere temperature 25°C. When measuring, use a thermocouple of small thermal capacity -K of ø0.1mm in conditions where the capacitor is not affected by radiant heat from other components or surrounding ambient fluctuations. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.) Continued on the following page. 189 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution Continued from the preceding page. C0G char., Rated Voltage: DC250V C0G char., Rated Voltage: DC630V Allowable voltage [Vp-p] Allowable voltage [Vp-p] 1000 to 100pF (250) 1 10 100 Frequency [kHz] 820pF 1000pF 1 10 100 Frequency [kHz] U2J char., Rated Voltage: DC250V Allowable voltage [Vp-p] 27 to 47pF (3150) 1000 1 10 100 Frequency [kHz] 1000 (250) 10,000pF U2J char., Rated Voltage: DC1kV 2,200pF 4,700pF 100 10,000pF 1 10 100 Frequency [kHz] 1000 Allowable voltage [Vp-p] 1,000pF 1000 1 10 100 Frequency [kHz] 2,200pF 4,700pF 10,000pF 100 22,000pF 47,000pF 10 (500)1000 to 680pF 1,000pF 1 U2J char., Rated Voltage: DC2kV to 470pF 1000 10 100 Frequency [kHz] U2J char., Rated Voltage: DC630V 1000 10000 to 100pF 150pF 220pF 1000 100 10 100 Frequency [kHz] U2J char., Rated Voltage: DC3.15kV 10000 10000 (1000) 1000 to 4,700pF 100 to 100pF 100 1 1000 1000 to 22pF 10 560pF 680pF 100 C0G char., Rated Voltage: DC3.15kV C0G char., Rated Voltage: DC1kV 10000 to 470pF (630) 1000 10000 Allowable voltage [Vp-p] Product Information !Caution 100 Allowable voltage [Vp-p] Safety Standard Certified GA3 Series 1000 Allowable voltage [Vp-p] AC250V Type GA2 Series The temperature of the surface of capacitor: 125˚C or less (including self-heating) 1 10 100 Frequency [kHz] (500)1000 Allowable voltage [Vp-p] Only for Applications <C0G char., Rated Voltage: DC3.15kV> The capacitors less than 22pF can be applied maximum 4.0kV peak to peak at 100kHz or less only for the ballast or the resonance usage in the LCD backlight inverter circuit. <Capacitor Selection Tool> We are also offering free software/the capacitor selection tool: "Murata Medium Voltage Capacitors Selection Tool by Voltage Form," which will assist you in selecting a suitable capacitor. The software can be downloaded from Murata's Website. (http://www.murata.com/designlib/mmcsv/index.html). By inputting capacitance values and the applied voltage waveform of the specific capacitor series, this software will calculate the capacitor's power consumption and list suitable capacitors (non-sine wave is also available). Allowable voltage [Vp-p] For General Purpose GRM/GRJ/GR3 Series (2) In case of C0G, U2J char. Due to the low self-heating characteristics of low-dissipation capacitors, the allowable electric power of these capacitors is generally much higher than that of X7R characteristic capacitors. When a high frequency voltage that causes 20°C selfheating to the capacitor is applied, it will exceed the capacitor's allowable electric power. The frequency of the applied sine wave voltage should be less than 500kHz (less than 100kHz in the case of rated voltage: DC3.15kV). The applied voltage should be less than the value shown in figure below. In the case of non-sine wave that includes a harmonic frequency, please contact our sales representatives or product engineers. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.) to 33pF 47pF 100pF (3150) 1000 1 10 100 Frequency [kHz] 1000 The sine-wave frequency VS allowable voltage Continued on the following page. 190 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution (2) Voltage Applied Method The capacitor's leads or terminals should be firmly connected to the output of the withstanding voltage test equipment, and then the voltage should be raised from near zero to the test voltage. If the test voltage is applied directly to the capacitor without raising it from near zero, it should be applied with the zero cross.* At the end of the test time, the test voltage should be reduced to near zero, and then the capacitor's leads or terminals should be taken off the output of the withstanding voltage test equipment. If the test voltage is applied directly to the capacitor without raising it from near zero, surge voltage may occur and cause a defect. *ZERO CROSS is the point where voltage sine wave passes 0V. - See the figure at right - Voltage sine wave Only for Applications AC IN AC250V Type GA2 Series 4. Test Condition for AC Withstanding Voltage (1) Test Equipment Tests for AC withstanding voltage should be made with equipment capable of creating a wave similar to a 50/60 Hz sine wave. If the distorted sine wave or overload exceeding the specified voltage value is applied, a defect may be caused. FUSE Safety Standard Certified GA3 Series 3. Fail-safe Failure of a capacitor may result in a short circuit. Be sure to provide an appropriate fail-safe function such as a fuse on your product to help eliminate possible electric shock, fire, or fumes. Please consider using fuses on each AC line if the capacitors are used between the AC input lines and earth (line bypass capacitors), to prepare for the worst case, such as a short circuit. For General Purpose GRM/GRJ/GR3 Series Continued from the preceding page. Product Information !Caution 0V zero cross Soldering and Mounting 1. Vibration and Impact Do not expose a capacitor to excessive shock or vibration during use. 2. Circuit Board Material It is possible for the chip to crack by the expansion and shrinkage of a metal board. Please contact us if you want to use our ceramic capacitors on a metal board such as Aluminum. 3. Land Layout for Cropping PC Board Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. [Component Direction] [Chip Mounting Close to Board Separation Point] Locate chip horizontal to the direction in which stress acts. <Example to be avoided> <Example of improvement> C Perforation B D A Chip arrangement Worst AGCGB~D Best Slit Continued on the following page. 191 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution Continued from the preceding page. For General Purpose GRM/GRJ/GR3 Series Only for Applications AC250V Type GA2 Series 4. Reflow Soldering When components are exposed to sudden heat, their mechanical strength can be decreased due to the extreme temperature changes which can cause flexing and result in internal mechanical damage, which will cause the parts to fail. In order to prevent mechanical damage, preheating is required for both the components and the PCB board. Preheating conditions are shown in Table 1. It is required to keep the temperature differential between the soldering and the components surface (ΔT) as small as possible. Solderability of Tin plating termination chips might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chips before use. When components are immersed in solvent after mounting, be sure to maintain the temperature difference (ΔT) between the component and solvent within the range shown in the Table 1. [Standard Conditions for Reflow Soldering] Infrared Reflow Temperature (D) Soldering Peak Temperature Gradual Cooling 200°C ΔT 170°C 150°C 130°C Preheating Time 60-120 seconds 30-60 seconds Vapor Reflow Temperature (D) Soldering Peak Temperature Gradual Cooling ΔT 170°C 150°C 130°C Table 1 Part Number Preheating Temperature Differential ΔTV190D G--32/42/43/52/55 ΔTV130D 60-120 seconds Time 20 seconds max. Recommended Conditions Pb-Sn Solder Infrared Reflow Vapor Reflow Lead Free Solder Product Information !Caution Peak Temperature 230-250°C 230-240°C 240-260°C Atmosphere Air Air Air or N2 Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu [Allowable Soldering Temperature and Time] Soldering Temperature (D) Safety Standard Certified GA3 Series G--18/21/31 270 260 250 240 230 0 30 60 90 Soldering Time (sec.) In the case of repeated soldering, the accumulated soldering time must be within the range shown above. Optimum Solder Amount for Reflow Soldering Overly thick application of solder paste results in excessive solder fillet height. This makes the chip more susceptible to mechanical and thermal stress on the board and may cause cracked chips. Too little solder paste results in a lack of adhesive strength on the outer electrode, which may result in chips breaking loose from the PCB. Make sure the solder has been applied smoothly to the end surface to a height of 0.2mm min. [Optimum Solder Amount for Reflow Soldering] 0.2mm min. in section Inverting the PCB Make sure not to impose an abnormal mechanical shock on the PCB. Continued on the following page. 192 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution Continued from the preceding page. Soldering Gradual Cooling ΔT 170°C 150°C 130°C 60-120 seconds Only for Applications Preheating Time 5 seconds max. [Allowable Soldering Temperature and Time] AC250V Type GA2 Series 270 260 250 240 230 0 Part Number For General Purpose GRM/GRJ/GR3 Series Temperature (D) Peak Temperature 10 Temperature Differential 20 30 Soldering Time (sec.) Safety Standard Certified GA3 Series Table 2 [Standard Conditions for Flow Soldering] Soldering Temperature (D) 5. Flow Soldering When components are exposed to sudden heat, their mechanical strength can be decreased due to the extreme temperature changes which can cause flexing and result in internal mechanical damage, which will cause the parts to fail. Additionally, an excessively long soldering time or high soldering temperature results in leaching by the outer electrodes, causing poor adhesion or a reduction in capacitance value due to loss of contact between electrodes and end termination. In order to prevent mechanical damage, preheating is required for both the components and the PCB board. Preheating conditions are shown in Table 2. It is required to keep temperature differential between the soldering and the components surface (ΔT) as small as possible. When components are immersed in solvent after mounting, be sure to maintain the temperature difference between the component and solvent within the range shown in Table 2. Do not apply flow soldering to chips not listed in Table 2. ΔTV150D G--18/21/31 In the case of repeated soldering, the accumulated soldering time must be within the range shown above. Recommended Conditions Pb-Sn Solder Lead Free Solder Peak Temperature 240-250°C 250-260°C Atmosphere Air N2 Product Information !Caution Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu Optimum Solder Amount for Flow Soldering The top of the solder fillet should be lower than the thickness of components. If the solder amount is excessively large, the risk of cracking is higher during board bending or under any other stressful conditions. Up to Chip Thickness Adhesive in section Continued on the following page. 193 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution Continued from the preceding page. For General Purpose GRM/GRJ/GR3 Series Only for Applications 6. Correction with a Soldering Iron When sudden heat is applied to the components by use of a soldering iron, the mechanical strength of the components will decrease because the extreme temperature change causes deformations inside the components. In order to prevent mechanical damage to the components, preheating is required for both the components and the PCB board. Preheating conditions, (The "Temperature of the Soldering Iron Tip", "Preheating Temperature," "Temperature Differential" between iron tip and the components and the PCB), should be within the conditions of table 3. It is required to keep the temperature differential between the soldering Iron and the component's surface (ΔT) as small as possible. After soldering, do not allow the component/PCB to cool down rapidly. The operating time for the re-working should be as short as possible. When re-working time is too long, it may cause solder leaching, in turn causing a reduction of the adhesive strength of the terminations. Table 3 Part Number Temperature Preheating Temperature of Soldering Differential Atmosphere Temperature Iron Tip (ΔT) AC250V Type GA2 Series G--18/21/31 350°C max. 150°C min. ΔTV190D air G--32/42/43/ 52/55 280°C max. 150°C min. ΔTV130D air *Applicable for both Pb-Sn and Lead Free Solder. Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu Safety Standard Certified GA3 Series Product Information !Caution Optimum Solder Amount when re-working Using a Soldering Iron For sizes smaller than Gpp18, the top of the solder fillet should be lower than 2/3 of the thickness of the component or 0.5mm whichever is smaller. For sizes larger than Gpp21, the top of the solder fillet should be lower than 2/3 of the thickness of the component. If the solder amount is excessive, the risk of cracking is higher during board bending or under any other stressful conditions. A Soldering iron ø3mm or smaller should be used. It is also necessary to keep the soldering iron from touching the components during the re-work. Solder wire with ø0.5mm or smaller is required for soldering. 7. Washing Excessive output of ultrasonic oscillation during cleaning causes PCBs to resonate, resulting in cracked chips or broken solder. Take note not to vibrate PCBs. 8. Handling Do not directly touch the chip capacitor, especially the ceramic body. Residue from hands/fingers may create a short circuit environment. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND FUMING WHEN THE PRODUCT IS USED. 194 Solder Amount in section C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Notice Only for Applications AC250V Type GA2 Series 2. Performance Check by Equipment Before using a capacitor, check that there is no problem in the equipment's performance and the specifications. Generally speaking, CLASS 2 (X7R, X7T char.) ceramic capacitors have voltage dependence characteristics and temperature dependence characteristics in capacitance. Therefore, the capacitance value may change depending on the operating condition in the equipment. Accordingly, be sure to confirm the apparatus performance of receiving influence in a capacitance value change of a capacitor, such as leakage current and noise suppression characteristics. Moreover, check the surge-proof ability of a capacitor in the equipment, if needed, because the surge voltage may exceed the specific value by the inductance of the circuit. For General Purpose GRM/GRJ/GR3 Series Rating 1. Capacitance Change of Capacitor (1) In the case of X7R, X7T char. Capacitors have an aging characteristic, whereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long time. Moreover, capacitance might change greatly depending on the surrounding temperature or an applied voltage. Therefore, it is not likely to be suitable for use in a time constant circuit. Please contact us if you need detailed information. (2) In the case of any char. except X7R, X7T Capacitance might change a little depending on the surrounding temperature or an applied voltage. Please contact us if you intend to use this product in a strict time constant circuit. Soldering and Mounting Safety Standard Certified GA3 Series 1. Construction of Board Pattern After installing chips, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. Product Information Notice Construction and Dimensions of Pattern (Example) Flow Soldering Chip Capacitor LgW Solder Resist c L W b a a b c 1.6g0.8 0.6-1.0 0.8-0.9 0.6-0.8 2.0g1.25 1.0-1.2 0.9-1.0 0.8-1.1 3.2g1.6 2.2-2.6 1.0-1.1 1.0-1.4 Flow soldering: 3.2g1.6 or less available. Land Reflow Soldering a b c 1.6g0.8 LgW 0.6-0.8 0.6-0.7 0.6-0.8 2.0g1.25 1.0-1.2 0.6-0.7 0.8-1.1 3.2g1.6 2.2-2.4 0.8-0.9 1.0-1.4 3.2g2.5 2.0-2.4 1.0-1.2 1.8-2.3 4.5g2.0 2.8-3.4 1.2-1.4 1.4-1.8 4.5g3.2 2.8-3.4 1.2-1.4 2.3-3.0 5.7g2.8 4.0-4.6 1.4-1.6 2.1-2.6 5.7g5.0 4.0-4.6 1.4-1.6 3.5-4.8 (in mm) Continued on the following page. 195 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Notice Continued from the preceding page. Dimensions of Slit (Example) For General Purpose GRM/GRJ/GR3 Series Chip Capacitor Slit Solder Resist d L e W Land Only for Applications AC250V Type GA2 Series Preparing the slit helps flux cleaning and resin coating on the back of the capacitor. However, the length of the slit design should be as short as possible to prevent mechanical damage in the capacitor. A longer slit design might receive more severe mechanical stress from the PCB. Recommended slit design is shown in the Table. LgW d e 1.6g0.8 - - 2.0g1.25 - - 3.2g1.6 1.0-2.0 3.2-3.7 3.2g2.5 1.0-2.0 4.1-4.6 4.5g2.0 1.0-2.8 3.6-4.1 4.5g3.2 1.0-2.8 4.8-5.3 5.7g2.8 1.0-4.0 4.4-4.9 5.7g5.0 1.0-4.0 6.6-7.1 (in mm) Land Layout to Prevent Excessive Solder Mounting Close to a Chassis d1 Chassis Mounting with Leaded Components Safety Standard Certified GA3 Series Solder (Ground solder) Mounting Leaded Components Later Soldering Iron Lead Wire of Component to be Connected Later. Lead Wire Connected to a Part Provided with Lead Wires. Examples to Be Avoided Adhesive Base board in section Land Pattern d2 Product Information Notice Examples of Improvements by the Land Division in section Solder Resist d1<d2 in section Solder Resist Solder Resist in section in section in section 2. Mounting of Chips Thickness of adhesives applied Keep thickness of adhesives applied (50-105μm or more) to reinforce the adhesive contact considering the thickness of the termination or capacitor (20-70μm) and the land pattern (30-35μm). Mechanical shock of the chip placer When the positioning claws and pick-up nozzle are worn, the load is applied to the chip while positioning is concentrated in one position, thus causing cracks, breakage, faulty positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. An excessively low bottom dead point of the suction nozzle imposes great force on the chip during mounting, causing cracked chips. Please set the suction nozzle's bottom dead point on the upper surface of the board. Continued on the following page. 196 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf Oct.1,2012 Notice A B D C Termination Product Information Notice Safety Standard Certified GA3 Series 4. Cleaning Please confirm there is no problem in the reliability of the product beforehand when cleaning it with the intended equipment. The residue after cleaning it might cause a decrease in the surface resistance of the chip and the corrosion of the electrode part, etc. As a result it might cause reliability to deteriorate. Please confirm beforehand that there is no problem with the intended equipment in ultrasonic cleansing. Only for Applications Depending on the conditions of the soldering temperature and/or immersion (melting time), effective areas may be lost in some parts of the terminations. To prevent this, be careful in soldering so that any possible loss of the effective area on the terminations will securely remain at a maximum of 25% on all edge length A-B-C-D-A of part with A, B, C, D, shown in the Figure below. (2) Flux Application An excessive amount of flux generates a large quantity of flux gas, causing deteriorated solderability. So apply flux thinly and evenly throughout. (A foaming system is generally used for flow soldering.) Flux containing too high a percentage of halide may cause corrosion of the outer electrodes without sufficient cleaning. Use flux with a halide content of 0.2% max. Do not use strong acidic flux. Do not use water-soluble flux.* (*Water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) (3) Solder The use of Sn-Zn based solder will deteriorate the reliability of the MLCC. Please contact our sales representative or product engineers on the use of Sn-Zn based solder in advance. AC250V Type GA2 Series 3. Soldering (1) Limit of losing effective area of the terminations and conditions needed for soldering. For General Purpose GRM/GRJ/GR3 Series Continued from the preceding page. 5. Resin Coating Please use it after confirming there is no influence on the product with the intended equipment before the resin coating and molding. A cracked chip might be caused at the cooling/heating cycle by the amount of resin spreading and/or bias thickness. The resin for coating and molding must be selected as the stress is small when stiffening and the hygroscopic is low as possible. 197 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. MEMO 198 C02E.pdf Oct.1,2012 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. For General Purpose KRM/KR3 Series High Capacitance for General Use KRM Series Large Capacitance and High Allowable Ripple Current Type KR3 Series Pa Package !Caution/Notice !C p200 p204 p208 p210 For General Purpose KRM/KR3 Series Metal Terminal Monolithic Ceramic Capacitors Product Information Contents Oct.1,2012 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Metal Terminal Monolithic Ceramic Capacitors Anti- Deflecting Soldering crack crack noise High Capacitance for General Use KRM Series For General Purpose KRM/KR3 Series c Features T Product Information 1. The product has high reliability against heat and mechanical impact. 2. Stacking two capacitors reduces the mounting space and achieves a large capacitance. 3. The unique terminal structure greatly reduces noise from the ceramics on the board. e W L Part Number KRM31F KRM31K c Applications For smoothing and noise suppression of DC-DC converters KRM55L KRM55Q KRM55T KRM55W Dimensions (mm) W T L 3.5±0.3 3.5±0.3 3.6±0.3 3.7±0.3 1.7±0.2 1.7±0.2 1.7±0.2 1.85±0.2 6.1±0.4 5.3±0.2 1.9±0.1 2.7±0.2 2.7±0.2 2.7±0.2 2.8±0.2 3.7±0.2 4.8±0.2 6.4±0.3 e 0.8±0.2 1.2±0.2 Do not use these products in any Automotive Power train or Safety equipment incliding Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile appliations such as Power train and Safety equipment. Thickness T max. (mm) Metal Terminal Width e (mm) 1.7 2 0.8±0.2mm 1.7 2.9 0.8±0.2mm 5.3 3 1.2±0.2mm 6.1 5.3 3.9 1.2±0.2mm 33µF±20% 6.1 5.3 5 1.2±0.2mm 47µF±20% 6.1 5.3 6.7 1.2±0.2mm X7R (EIA) 2.2µF±10% 3.6 1.7 2.9 0.8±0.2mm 50Vdc X7R (EIA) 4.7µF±10% 3.5 1.7 2.9 0.8±0.2mm 50Vdc X7R (EIA) 4.7µF±10% 6.1 5.3 3 1.2±0.2mm KRM55QR71H106KH01K 50Vdc X7R (EIA) 10µF±10% 6.1 5.3 3.9 1.2±0.2mm KRM55WR71H226MH01K 50Vdc X7R (EIA) 22µF±20% 6.1 5.3 6.7 1.2±0.2mm KRM55LR71J475KH01K 63Vdc X7R (EIA) 4.7µF±10% 6.1 5.3 3 1.2±0.2mm KRM55QR71J106KH01K 63Vdc X7R (EIA) 10µF±10% 6.1 5.3 3.9 1.2±0.2mm KRM55WR71J226MH01K 63Vdc X7R (EIA) 22µF±20% 6.1 5.3 6.7 1.2±0.2mm KRM31KR72A105KH01K 100Vdc X7R (EIA) 1.0µF±10% 3.5 1.7 2.9 0.8±0.2mm KRM31KR72A225KH01K 100Vdc X7R (EIA) 2.2µF±10% 3.7 1.7 2.9 0.8±0.2mm KRM55LR72A475KH01K 100Vdc X7R (EIA) 4.7µF±10% 6.1 5.3 3 1.2±0.2mm KRM55QR72A685KH01K 100Vdc X7R (EIA) 6.8µF±10% 6.1 5.3 3.9 1.2±0.2mm KRM55TR72A106MH01K 100Vdc X7R (EIA) 10µF±20% 6.1 5.3 5 1.2±0.2mm KRM55WR72A156MH01K 100Vdc X7R (EIA) 15µF±20% 6.1 5.3 6.7 1.2±0.2mm Length L (mm) Rated Voltage TC Code (Standard) KRM31FR61E106KH01K 25Vdc X5R (EIA) 10µF±10% 3.5 KRM31KC81E106KH01K 25Vdc X6S (EIA) 10µF±10% 3.5 KRM55LR71E156KH01K 25Vdc X7R (EIA) 15µF±10% 6.1 KRM55QR71E226KH01K 25Vdc X7R (EIA) 22µF±10% KRM55TR71E336MH01K 25Vdc X7R (EIA) KRM55WR71E476MH01K 25Vdc X7R (EIA) KRM31KR71H225KH01K 50Vdc KRM31KR71H475KH01K KRM55LR71H475KH01K Part Number 200 Capacitance Width W (mm) C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 KRM Series Specifications and Test Methods Item Specifications Test Method 1 Operating Temperature Range X5R Char.: -55 to +85°C X6S Char.: -55 to +105°C X7R Char.: -55 to +125°C Reference temperature: 25°C 2 Appearance No defects or abnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers No failure should be observed when voltage in the table is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50mA. Dielectric Strength No defects or abnormalities 5 Insulation Resistance (I.R.) [KRM31] W.V.: 25V : More than 50MΩ · μF W.V.: 50V/100V : More than 500MΩ · μF [KRM55] More than 100MΩ · μF 6 Capacitance Within the specified tolerance Dissipation Factor (D.F.) [KRM31] W.V.: 25V : 0.15 max. W.V.: 50V : 0.025 max. W.V.: 100V : 0.05 max. [KRM55] 0.025 max. 7 Rated Voltage DC25V, DC50V, DC63V DC100V Test Voltage 250% of the rated voltage 200% of the rated voltage Product Information 4 The insulation resistance should be measured with Rated Voltage and within 60±5 sec. of charging. The capacitance/D.F. should be measured at reference temperature at the meaning frequency and voltage shown in the table. Nominal Capacitance C>10μF CV10μF Measuring Frequency 120±24Hz 1±0.2kHz Measuring Voltage AC0.5±0.1V(r.m.s.) AC1.0±0.2V(r.m.s.) The capacitance measurement should be made at each step specified in the Table. 8 Capacitance Temperature Characteristics X5R Char.: Within ±15% (Temp. Range: -55 to +85°C) X6S Char.: Within ±22% (Temp. Range: -55 to +105°C) X7R Char.: Within ±15% (Temp. Range: -55 to +125°C) Step 1 2 3 4 5 Temperature (°C) 25±2 Min. Operating Temp. ±3 25±2 Max. Operating Temp. ±2 25±2 U*ÀiÌÀi>ÌiÌ Perform a heat treatment at 150+0/–10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition. (*1) A static load of 10N using a pressure rod should be applied to the center in the direction of the arrow and held for 10 s. Pressure Rod Pressure 9 Strength of Metal Terminal R 0.5 Termination not to be broken or loosened 0.5L 10 Adhesive Strength of Termination No removal of the terminations or other defect should occur. For General Purpose KRM/KR3 Series No. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free defects such as heat shock. 10N, 10T1s Glass Epoxy Board Fig. 1 (*1) "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 201 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 KRM Series Specifications and Test Methods Continued from the preceding page. ° Ìi -«iVvV>Ìà /iÃÌÊiÌ ` Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). >«>VÌ>Vi Within the specified tolerance 11 6LÀ>ÌÊ ,iÃÃÌ>Vi D.F. In accordance with item No.7 Product Information Solder Resist Cu Glass Epoxy Board No marking defects Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. b ø4.5 d 40 For General Purpose KRM/KR3 Series ««i>À>Vi No defects or abnormalities c 12 20 50 iviVÌ a t : 1.6 100 /Þ«i KRM31 KRM55 iÃÊ® L V 5.0 1.65 8.0 5.6 > 2.2 4.5 (in mm) R4 speed: 1.0mm/s Pressurize Flexure: V5 ` 1.0 1.0 Capacitance meter 45 Fig. 2 45 (in mm) Fig. 3 Reflow Soldering: Peak 260+0/-5°C The area of soldering 230°C min., 20 to 40 s Let sit for 24±2 h at room condition,* then measure. U*ÀiÌÀi>ÌiÌ Perform the heat treatment at 150+0/-10°C for 60±5 min. and then let sit for 24±2 h at room condition. (*1) 13 -`iÀ>LÌÞÊvÊ /iÀ>Ì The metal surface is soldered well 300°C 260+0/-5°C 20 to 40 s 230°C min. 200°C 180°C 150°C 100°C ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±10% >}i ,iÃÃÌ>ViÊ 14 ÌÊ-`iÀ}Ê D.F. i>Ì °,° iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.7 In accordance with item No.5 In accordance with item No.4 60 to 120 s UÊV>ÃiÊvÊ,ivÜÊ-`iÀ} See item 13 Solderability of termination UÊV>ÃiÊvÊ-`iÀ}ÊÀ Temp. of solder: 350±10°C Solder time: 4+1/-0 s Let sit for 24±2 hrs.at room condition,* then measure Please refer to "Caution (Soldering and Mounting) Correction with a Soldering Iron" (*1) "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 202 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 KRM Series Specifications and Test Methods Continued from the preceding page. -«iVvV>Ìà ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±7.5% >}i 15 D.F. In accordance with item No.7 I.R. In accordance with item No.5 /i«iÀ>ÌÕÀiÊ ÞVi iiVÌÀVÊ -ÌÀi}Ì /iÃÌÊiÌ ` Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 100 cycles according to the 4 heat treatments listed in the following table. Let sit for 24±2 hrs. at room condition,* then measure. -Ìi« 1 2 3 4 /i«iÀ>ÌÕÀiÊc ® Min. Operating Temp. ±3 Room Temp. Max. Operating Temp. ±2 Room Temp. /iÊ°® 30±3 2 to 3 30±3 2 to 3 U*ÀiÌÀi>ÌiÌ Perform a heat treatment at 150+0/-10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition. (*1) In accordance with item No.4 Solder Resist Cu Glass Epoxy Board Fig. 4 ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±15% >}i D.F. [KRM31] W.V.: 25V : 0.2 max. W.V.: 50V/100V : 0.05 max. [KRM55] 0.05 max. I.R. [KRM31] W.V.: 25V : More than 12.5MΩ · μF W.V.: 50V/100V : More than 50MΩ · μF [KRM55] More than 10MΩ · μF iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 Õ`ÌÞÊ 16 -Ìi>`ÞÊ -Ì>Ìi® Let the capacitor sit at 40±2°C and relative humidity of 90 to 95% for 500+24/-0 hrs. Remove and let sit for 24±2 hrs. at room condition,* then measure. U*ÀiÌÀi>ÌiÌ Perform a heat treatment at 150+0/-10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition. (*1) ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±15% >}i D.F. [KRM31] W.V.: 25V : 0.2 max. W.V.: 50V/100V : 0.05 max. [KRM55] 0.05 max. I.R. [KRM31] W.V.: 25V : More than 25MΩ · μF W.V.: 50V/100V : More than 50MΩ · μF [KRM55] More than 10MΩ · μF 17 vi iiVÌÀVÊ -ÌÀi}Ì Apply voltage as in the Table for 1000+48/-0 hrs. at maximum operating temperature ±3°C. Remove and let sit for 24±2 hrs. at room condition, (*1) then measure. ,>Ìi`Ê6Ì>}i DC25V, DC50V DC63V, DC100V For General Purpose KRM/KR3 Series Ìi Product Information ° ««i`Ê6Ì>}i 200% of the rated voltage (*2) 150% of the rated voltage The charge/discharge current is than 50mA. U*ÀiÌÀi>ÌiÌ Perform a heat treatment at 150+0/-10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition. (*1) (*2) KRM31KC81E106, KRM31FR61E106, KRM31KR71H225, KRM31KR71H475, KRM31KR72A105 : 150% of the rated voltage In accordance with item No.4 (*1) "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 203 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Metal Terminal Monolithic Ceramic Capacitors Anti- Deflecting Soldering crack crack noise Large Capacitance and High Allowable Ripple Current KR3 Series For General Purpose KRM/KR3 Series c Features T Product Information 1. The product has high reliability against heat and mechanical impact. 2. Stacking two capacitors reduces the mounting space and achieves a large capacitance. 3. The unique terminal structure greatly reduces noise from the ceramics on the board. 4. This series can provide higher capacitance value under DC-Bias condition, compare with previous X7R char. 5. Improve the performance of ripple-resistance compared with X7R char. e W L Part Number KR355L KR355Q KR355T KR355W Dimensions (mm) W T L 6.1±0.4 2.8±0.2 3.7±0.2 4.8±0.2 6.4±0.3 5.3±0.2 e 1.2±0.2 c Applications 1. DC smoothing & EMI filiter for LED Lighting. 2. For PFC circuit in the swiching power supplies, AC adaptor. 3. DC-DC converter for general electronic equipment. Do not use these products in any Automotive Power train or Safety equipment incliding Battery chargers for Electric Vehicles and Plug-in Hybrids. Only Murata products clearly stipulated as "for Automotive use" can be used for automobile appliations such as Power train and Safety equipment. Part Number Rated Voltage TC Code (Standard) Capacitance Length L (mm) Width W (mm) Thickness T max. (mm) Metal Terminal Width e (mm) KR355LD72E474KH01K 250Vdc X7T (EIA) 0.47µF±10% 6.1 5.3 3 1.2±0.2mm KR355QD72E105KH01K 250Vdc X7T (EIA) 1.0µF±10% 6.1 5.3 3.9 1.2±0.2mm KR355WD72E225MH01K 250Vdc X7T (EIA) 2.2µF±20% 6.1 5.3 6.7 1.2±0.2mm KR355LD72W224KH01K 450Vdc X7T (EIA) 0.22µF±10% 6.1 5.3 3 1.2±0.2mm KR355LD72W474KH01K 450Vdc X7T (EIA) 0.47µF±10% 6.1 5.3 3 1.2±0.2mm KR355QD72W564KH01K 450Vdc X7T (EIA) 0.56µF±10% 6.1 5.3 3.9 1.2±0.2mm KR355TD72W105MH01K 450Vdc X7T (EIA) 1.0µF±20% 6.1 5.3 5 1.2±0.2mm KR355WD72W125MH01K 450Vdc X7T (EIA) 1.2µF±20% 6.1 5.3 6.7 1.2±0.2mm KR355LD72J104KH01K 630Vdc X7T (EIA) 0.1µF±10% 6.1 5.3 3 1.2±0.2mm KR355LD72J154KH01K 630Vdc X7T (EIA) 0.15µF±10% 6.1 5.3 3 1.2±0.2mm KR355QD72J224KH01K 630Vdc X7T (EIA) 0.22µF±10% 6.1 5.3 3.9 1.2±0.2mm KR355QD72J274KH01K 630Vdc X7T (EIA) 0.27µF±10% 6.1 5.3 3.9 1.2±0.2mm KR355WD72J474MH01K 630Vdc X7T (EIA) 0.47µF±20% 6.1 5.3 6.7 1.2±0.2mm KR355WD72J564MH01K 630Vdc X7T (EIA) 0.56µF±20% 6.1 5.3 6.7 1.2±0.2mm 204 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 KR3 Series Specifications and Test Methods Item Specifications Test Method 1 Operating Temperature Range -55 to +125°C Reference temperature: 25°C 2 Appearance No defects or adnormalities Visual inspection 3 Dimensions Within the specified dimensions Using calipers and micrometers No failure should be observed when voltage in the table is applied between the terminations for 1 to 5 sec., provided the charge/discharge current is less than 50mA. Dielectric Strength No defects or abnormalities 5 Insulation Resistance (I.R.) More than 10,000MΩ or 100Ω · μF (Whichever is Smaller) 6 Capacitance Within the specified tolerance 7 Dissipation Factor (D.F.) 0.01 max. Rated Voltage DC250V DC450V DC630V Test Voltage 200% of the rated voltage 150% of the rated voltage 120% of the rated voltage Product Information 4 The inslation resisitance should be measured with DC500V±50V (DC250V±25V in case of rated Voltage: DC250V, DC450V) and within 60±5 sec. of charging. The capacitance/D.F. should be measured at a frequency of 1±0.2kHz and a voltage of AC1±0.2V (r.m.s.). The capacitance measurement should be made at each step specified in the table. 8 Capacitance Temperature Characteristics Cap. Change Within +22/-33% (Temp. Range: -55 to +125°C) Step 1 2 3 4 5 Temperature (°C) 25±2 Min. Operating Temp. ±3 25±2 Max. Operating Temp. ±2 25±2 U*ÀiÌÀi>ÌiÌ Perform a heat treatment at 150+0/-10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* A static load of 10N using a pressure rod should be applied to the center in the direction of the arrow and held for 10 sec. Pressure Rod Pressure 9 Strength of Metal Terminal R 0.5 Termination not to be broken or loosened 0.5L 10 Adhesive Strength of Termination No removal of the terminations or other defect should occur. Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 1. Then apply 10N force in the direction of the arrow. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free defects such as heat shock. 10N, 10T1s Glass Epoxy Board Fig. 1 Appearance No defects or abnormalities Capacitance Within the specified tolerance 11 Vibration Resistance D.F. For General Purpose KRM/KR3 Series No. Solder the capacitor to the test jig (glass epoxy board). The capacitor should be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, should be traversed in approximately 1 min. This motion should be applied for a period of 2 hrs. in each of 3 mutually perpendicular directions (total of 6 hrs.). In accordance with item No.7 Solder Cu Glass Epoxy Board * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 205 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 KR3 Series Specifications and Test Methods Continued from the preceding page. ° Ìi -«iVvV>Ìà /iÃÌÊiÌ ` Solder the capacitor to the testing jig (glass epoxy board) shown in Fig. 2. Then apply a force in the direction shown in Fig. 3. The soldering should be done using the reflow method and should be conducted with care so that the soldering is uniform and free of defects such as heat shock. b ø4.5 d c 12 20 50 40 For General Purpose KRM/KR3 Series No marking defects iviVÌ a t : 1.6 100 Product Information /Þ«i KR355 iÃÊ® L c 8.0 5.6 > 4.5 R4 speed: 1.0mm/s Pressurize (in mm) Flexure: V5 Capacitance meter ` 1.0 45 Fig. 2 45 (in mm) Fig. 3 Reflow Soldering: Peak 260+0/-5°C The area of soldering 230°C min., 20 to 40 sec. Let sit for 24±2 hrs. at room condition*, then measure. U*ÀiÌÀi>ÌiÌ Perform the heat treatment at 150+0/-10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* 13 -`iÀ>LÌÞÊvÊ /iÀ>Ì The metal surface is soldered well. 300°C 260+0/-5°C 20 to 40 s 230°C min. 200°C 180°C 150°C 60 to 120 s 100°C ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±10% >}i ,iÃÃÌ>ViÊ 14 ÌÊ-`iÀ}Ê D.F. i>Ì I.R. iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.7 In accordance with item No.5 In accordance with item No.4 ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±7.5% >}i 15 D.F. In accordance with item No.7 I.R. In accordance with item No.5 /i«iÀ>ÌÕÀiÊ ÞVi iiVÌÀVÊ -ÌÀi}Ì UÊV>ÃiÊvÊ,ivÜÊ-`iÀ} See item 13 Solderability of Termination UÊV>ÃiÊvÊ-`iÀ}ÊÀ Temp. of solder: 350±10°C Solder time: 4+1/-0 sec. Let sit for 24±2 hrs.at room condition,* then measure. Please refer to "Caution (Soldering and Mounting) Correction with a Soldering Iron". Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig. 4. Perform the 100 cycles according to the 4 heat treatments listed in the following table. Let sit for 24±2 hrs. at room condition*, then measure. -Ìi« 1 2 3 4 /i«iÀ>ÌÕÀiÊc ® Min. Operating Temp. ±3 Room Temp. Min. Operating Temp. ±2 Room Temp. /iÊ°® 30±3 2 to 3 30±3 2 to 3 U*ÀiÌÀi>ÌiÌ Perform a heat treatment at 150+0/-10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* In accordance with item No.4 Solder Cu Glass Epoxy Board Fig. 4 * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued on the following page. 206 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 KR3 Series Specifications and Test Methods Continued from the preceding page. -«iVvV>Ìà /iÃÌÊiÌ ` ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±12.5% >}i Õ`ÌÞÊ 16 -Ìi>`ÞÊ D.F. -Ì>Ìi® I.R. iiVÌÀVÊ -ÌÀi}Ì 0.02 max. More than 1,000MΩ or 10MΩ · μF (Whichever is smaller) In accordance with item No.4 ««i>À>Vi No marking defects >«>VÌ>ViÊ Within ±12.5% >}i 17 vi D.F. 0.02 max. I.R. More than 1,000MΩ or 10MΩ · μF (Whichever is smaller) iiVÌÀVÊ -ÌÀi}Ì In accordance with item No.4 Let the capacitor sit at 40±2°C and relative humidity of 90 to 95% for 500+24/-0 hrs. Remove and let sit for 24±2 hrs. at room condition*, then measure. U*ÀiÌÀi>ÌiÌ Perform a heat treatment at 150+0/-10°C for 60±5 min. and then let sit for 24±2 hrs. at room condition.* Apply voltage as in the Table for 1000+48/-0 hrs. at maximum operating temperature ±3°C. Remove and let sit for 24±2 hrs. at room condition,* then measure. ,>Ìi`Ê6Ì>}i DC250V DC450V DC630V ««i`Ê6Ì>}i 150% of the rated voltage 130% of the rated voltage 120% of the rated voltage The charge/discharge current is than 50mA. U*ÀiÌÀi>ÌiÌ Apply test voltage for 60±5min. at test temperature. Remove and let sit for 24±2 hrs, at room condition.* * "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa 207 For General Purpose KRM/KR3 Series Ìi Product Information ° C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Package Taping is standard packaging method. Dimensions (mm) Part Number Quantity (pcs.) W T ø330mm Reel Kpp31K 3.5 1.7 2.7 4,000 Kpp31F 3.5 1.7 1.9 5,000 Kpp55L 6.1 5.3 2.8 2,000 Kpp55Q 6.1 5.3 3.7 1,000 Kpp55T 6.1 5.3 4.8 1,000 Kpp55W 6.1 5.3 6.4 500 ø180mm reel is also available. c Tape Carrier Packaging (1) Appearance of Taping Embossed Tape (2) Dimensions of Tape Embossed Tape 12mm width 4mm pitch Tape Cover Tape: 0.06mm in thickness 2.0±0.05 4.0±0.1 4.0±0.1 +0.1 ø1.5 –0 0.3±0.1 1.75±0.1 5.5±0.05 Cavity for Chip: As specified in (2) B A 12.0±0.3 Sprocket Hole: As specified in (2) Base Tape: As specified in (2) Direction of Feed Part Number Packed Capacitors Capacitor C max. A* B* C Kpp31K 2.2 4.1 4.1 Kpp31F 2.2 4.1 2.8 *Nominal Value 12mm width 8mm pitch Tape +0.1 0.4±0.1 1.75±0.1 12.0±0.1 Direction of Feed A B A Part Number 0.4±0.1 1.75±0.1 4.0±0.1 12.0±0.3 4.0±0.1 Kpp55L ø1.5 –0 2.0±0.1 Direction of Feed C max. A* B* C 5.5 6.4 4.1 Kpp55Q 5.5 6.4 5.8 Kpp55T 5.5 6.4 5.8 Part Number Kpp55W 16.0±0.3 2.0±0.05 7.5±0.1 8.0±0.1 16mm width 12mm pitch Tape +0.1 ø1.5 –0 5.5±0.05 Product Information Package L B For General Purpose KRM/KR3 Series c Minimum Quantity Guide C max. A* B* C 5.7 6.7 7.4 *Nominal Value *Nominal Value (in mm) Continued on the following page. 208 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Package Continued from the preceding page. (3) Dimensions of Reel ø21±0.8 For General Purpose KRM/KR3 Series Product Information Package ø13±0.2 330±2.0 2.0±0.5 +1 (Tape width 12mm) 100 -0 80±1.0 (Tape width 16mm) 17.5±1.5 (Tape width 12mm) 21.5±1.0 (Tape width 16mm) 13.5±1.0 (Tape width 12mm) 17.5±1.0 (Tape width 16mm) (in mm) (4) Taping Method q Tapes for capacitors are wound clockwise. The sprocket holes are to the right as the tape is pulled toward the user. w Part of the leader and part of the empty tape should be attached to the end of the tape as shown at right. e The top tape or cover tape and base tape are not attached at the end of the tape for a minimum of 5 pitches. r Missing capacitors number within 0.1% of the number per reel or 1 pc, whichever is greater, and are not continuous. t The top tape or cover tape and bottom tape should not protrude beyond the edges of the tape and should not cover sprocket holes. y Cumulative tolerance of sprocket holes, 10 pitches: ±0.3mm. u Peeling off force: 0.1 to 0.6N in the direction shown at right. Capacitors mounting unit Vacant section 160 min. Vacant section 190 min. 210 min. (Top Tape or Cover Tape alone) Direction of Feed (in mm) 165 to 180° Top Tape or Cover Tape Base Tape 209 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Caution/Notice !Caution For General Purpose KRM/KR3 Series c Storage and Operation Conditions ........................ 211 Notice c Rating .................................................................... 214 1. Capacitance Change of Capacitor..................... 214 c Rating .................................................................... 211 2. Performance Check by Equipment .................... 214 1. Operating Voltage.............................................. 211 Product Information !Caution/Notice 2. Operating Temperature and Self-generated Heat ................................... 211 3. Fail-safe ............................................................. 211 c Soldering and Mounting ........................................ 212 1. Vibration and Impact.......................................... 212 2. Land Layout for Cropping PC Board ................. 212 3. Reflow Soldering ............................................... 212 4. Flow Soldering ................................................... 213 5. Correction with a Soldering Iron ........................ 213 210 c Soldering and Mounting ........................................ 214 1. Construction of Board Pattern ........................... 214 2. Mounting of Chips.............................................. 214 3. Soldering ........................................................... 214 4. Cleaning ............................................................ 214 5. Resin Coating .................................................... 214 C02E.pdf Oct.1,2012 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution c Storage and Operation Conditions For General Purpose KRM/KR3 Series performance of a cleaned, bonded or molded product in the intended equipment. Store the capacitors where the temperature and relative humidity do not exceed 5 to 40 degrees centigrade and 20 to 70%. Use capacitors within 6 months of delivery. Check the solderability after 6 months or more. c Rating 1. Operating Voltage When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p value of the applied voltage or the Vo-p which contains DC bias within the rated voltage range. When the voltage is applied to the circuit, starting or stopping may generate irregular voltage for a transit period because of resonance or switching. Be sure to use a capacitor with a rated voltage range that includes these irregular voltages. Voltage Positional Measurement DC Voltage V0-p DC+AC Voltage V0-p When DC-rated capacitors are to be used in input circuits from a commercial power source (AC filter), be sure to use Safety Certified Capacitors because various regulations for withstanding voltage or impulses, established for all equipment, should be taken into consideration. AC Voltage Vp-p Pulse Voltage (1) Vp-p Pulse Voltage (2) Vp-p 2. Operating Temperature and Self-generated Heat Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range. Be sure to take into account the heat generated by the capacitor itself. When the capacitor is used in a highfrequency voltage, pulse voltage, it may self-generate heat due to dielectric loss. Applied voltage should be the load such as selfgenerated heat is within 20°C on the condition of atmosphere temperature 25°C. When measuring, use a thermocouple of small thermal capacity -K of ø0.1mm in conditions where the capacitor is not affected by radiant heat from other components or surrounding ambient fluctuations. Excessive heat may lead to deterioration of the capacitor's characteristics and reliability. (Never attempt to perform measurement with the cooling fan running. Otherwise, accurate measurement cannot be ensured.) 3. Fail-safe Failure of a capacitor may result in a short circuit. Be sure to provide an appropriate fail-safe function such as a fuse on your product to help eliminate possible electric shock, fire, or fumes. Continued on the following page. 211 Product Information !Caution Do not use or store capacitors in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. In addition, avoid exposure to moisture. Before cleaning, bonding or molding this product, verify that these processes do not affect product quality by testing the C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution Continued from the preceding page. Soldering and Mounting 1. Vibration and Impact For General Purpose KRM/KR3 Series Do not expose a capacitor to excessive shock or vibration during use. Do not directly touch the capacitor, especially the ceramic body. Residue from hands/fingers may create a short circuit environment. Product Information !Caution 2. Land Layout for Cropping PC Board Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. [Component Direction] [Chip Mounting Close to Board Separation Point] Locate chip horizontal to the direction in which stress acts. <Example to be avoided> C Perforation B Chip arrangement Worst AGCGB~D Best D A Slit <Example of improvement> 3. Reflow Soldering When components are exposed to sudden heat, their mechanical strength can be decreased due to the extreme temperature changes which can cause flexing and result in internal mechanical damage, which will cause the parts to fail. In order to prevent mechanical damage, preheating is required for both the components and the PCB board. Preheating conditions are shown in Table 1. It is required to keep the temperature differential between the soldering and the components surface (ΔT) as small as possible. When components are immersed in solvent after mounting, be sure to maintain the temperature difference (ΔT) between the component and solvent within the range shown in the Table 1. [Standard Conditions for Reflow Soldering] Infrared Reflow Temperature (D) Soldering Peak Temperature Gradual Cooling 200°C ΔT 170°C 150°C 130°C Preheating Time 60-120 seconds 30-60 seconds Vapor Reflow Table 1 Temperature (D) Part Number Temperature Differential K--31 ΔTV190D K--55 ΔTV130D Soldering Peak Temperature Gradual Cooling ΔT 170°C 150°C 130°C Recommended Conditions Preheating Pb-Sn Solder Infrared Reflow Vapor Reflow Lead Free Solder Peak Temperature 230-250°C 230-240°C 240-260°C Atmosphere Air Air Air or N2 60-120 seconds Time 20 seconds max. Pb-Sn Solder: Sn-37Pb Lead Free Solder: Sn-3.0Ag-0.5Cu Continued on the following page. 212 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 !Caution Continued from the preceding page. For General Purpose KRM/KR3 Series [Optimum Solder Amount for Reflow Soldering] in section Inverting the PCB Make sure not to impose an abnormal mechanical shock on the PCB. 4. Flow Soldering Do not apply flow soldering. 5. Correction with a Soldering Iron 17 (in mm) Soldering Iron Temperature of iron chip: 350°C max./5s max./60W max. Electrode Land Thread Solder Optimum Solder Amount when re-working Using a Solder Iron. The top of the solder fillet should be lower than the level of the bottom of the chip. 26 R0.5 ø6.5 Please refer to the figure of a soldering iron on the right. Please use thread solder which is smaller than 0.5mm in diameter. A soldering iron must be touched the bottom of metal terminal. *1) Do not touch ceramic, or it causes cracks because of sudden heat. *2) Do not touch the connection between a chip and a metal and the outside of that area, or it causes the chip to move and come off. Please only touch the metal terminal. Do not touch the chip. [Optimum Solder Amount when Re-working Using a Solder Iron] in section FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY RESULT, WORST CASE, IN A SHORT CIRCUIT AND CAUSE FUMING OR PARTIAL DISPERSION WHEN THE PRODUCT IS USED. 213 Product Information !Caution Optimum Solder Amount for Reflow Soldering If solder paste is excessive, solder between a chip and a metal terminal melts. This causes the chip to move and come off. If solder paste is too little, it causes a lack of adhesive strength on the metal terminal and the capacitor comes off. Please make sure that solder is smoothly applied higher than 0.3mm and lower than the level of the bottom of the chip. C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Notice c Rating For General Purpose KRM/KR3 Series Product Information Notice 1. Capacitance Change of Capacitor Capacitors have an aging characteristic, whereby the capacitor continually decreases its capacitance slightly if the capacitor is left on for a long time. Moreover, capacitance might change greatly depending on the surrounding temperature or an applied voltage. Therefore, it is not likely to be suitable for use in a time constant circuit. Please contact us if you need detailed information. 2. Performance Check by Equipment Before using a capacitor, check that there is no problem in the equipment's performance and the specifications. Generally speaking, CLASS 2 ceramic capacitors have voltage dependence characteristics and temperature dependence characteristics in capacitance. Therefore, the capacitance value may change depending on the operating condition in the equipment. Accordingly, be sure to confirm the apparatus performance of receiving influence in a capacitance value change of a capacitor, such as leakage current and noise suppression characteristics. Moreover, check the surge-proof ability of a capacitor in the equipment, if needed, because the surge voltage may exceed the specific value by the inductance of the circuit. c Soldering and Mounting 1. Construction of Board Pattern If solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to lower. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. Construction and Dimensions of Pattern (Example) Chip Capacitor Solder Resist c b Part Number Land a a b c Kpp31 1.6 1.8 1.9 Kpp55 2.6 2.7 5.6 (in mm) 2. Mounting of Chips Mechanical shock of the chip placer When the positioning claws and pick-up nozzle are worn, the load is applied to the chip while positioning is concentrated in one position, thus causing cracks, breakage, faulty positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. An excessively low bottom dead point of the suction nozzle imposes great force on the chip during mounting, causing cracked chips and the metal to bend. Please set the suction nozzle's bottom dead point on the upper surface of the board. 3. Soldering Flux Application Do not use strong acidic flux. Do not use water-soluble flux.* (*Water-soluble flux can be defined as non rosin type flux including wash-type flux and non-wash-type flux.) 4. Cleaning Please confirm there is no problem in the reliability of the product beforehand when cleaning it with the intended equipment. The residue after cleaning it might cause a decrease in the surface resistance of the chip and the corrosion of the electrode part, etc. As a result it might cause reliability to deteriorate. Please confirm beforehand that there is no problem with the intended equipment in ultrasonic cleansing. 5. Resin Coating Please use it after confirming there is no influence on the product with the intended equipment before the resin coating and molding. A cracked chip might be caused at the cooling/heating cycle by the amount of resin spreading and/or bias thickness. The resin for coating and molding must be selected as the stress is small when stiffening and the hygroscopic is low as possible. 214 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf Oct.1,2012 ISO 9001 Certifications c Qualified Standards The products listed here have been produced by ISO 9001 certified factory. Plant Fukui Murata Mfg. Co., Ltd. Izumo Murata Mfg. Co., Ltd. Okayama Murata Mfg. Co., Ltd. Murata Electronics Singapore (Pte.) Ltd. Beijing Murata Electronics Co., Ltd. Wuxi Murata Electronics Co., Ltd. 215 !Note • Please readd rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog og has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 216 C02E.pdf Oct.1,2012 C02E.pdf !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2012 Please check Murata’s newsletter! You can learn about electric parts with fun. http://www.murata.com/products/emicon_fun/ EMICON-FUN! disseminated widely from basics (principles, characteristics, mounting, etc.) of capacitors, inductors and EMI suppression filters to information can practically be used. Updated information is also distributed via the mail magazine. You can register from the Products page on Murata Manufacturing Web site. http://www.murata.com/products/ This banner is the entrance of register form 217 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. C02E.pdf Oct.1,2012 Capacitor WEB Site Introduction The WEB site and search engine of ceramic capacitors has been drastically renewed. http://www.murata.com/products/capacitor/ capacitor murata Convenient Search The type of searches has been increased to respond to various ways of searching. The products you are searching for can easily be found from about 40,000 part numbers! The frequency of revisions and discontinuance has been increased to provide the latest information at all times! Substantial Technical Information Reference drawings (Specifications and Test Methods) can be downloaded in PDF format. Graphs of the electrical characteristic data (Capacitance - Temperature characteristics / DC bias characteristics / AC voltage characteristics / Frequency characteristics) can be displayed. s Reliability test data can be downloaded. s s 1 Search by features Products can be searched by problems, shapes or mounting methods. 2 Search in the lineups Products can be searched by entire product lineup. 3 Search by specifications Products can be searched by capacitance, rated voltage or temperature characteristics. 4 Cross reference search Equivalent products of Murata can be searched by competitors' part numbers. 5 Search by part number Products can be searched by Murata's part numbers. 1 2 3 4 5 SimSurfing This is a WEB application to display characteristics charts of Murata products, and download the characteristics data. S parameter Netlist (SPICE Model) s Data Libraries s s (for Agilent ADS, for AWR Microwave Office®) Frequently Asked Questions (FAQ) This is a collection of questions asked by customers. The contents of problems can easily be searched by keywords with this search function. Characteristics Data (Dimensions / Capacitance - Temperature Characteristics / DC Bias Characteristics / AC Voltage / Frequency Characteristics / Heat Generation by Ripple Currents, etc.) Reliability Test Data Initial Characteristics / Board Bending Resistance / Humidity Resistance / High Temperature Load / Solderability, etc. Safety Certificates by Series List of ISO14001 Certified Plants 218 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Cat. No. C02E-17 C02E.pdf Oct.1,2012