GB-333 SERIES Mega Bright, Round Type LED Lamps (5mm) DESCRIPTION: PACKAGE DIMENSIONS The 333 Mega Bright series is conventional LED Lamps utilizing higher intensity material to achieve the brightest performance. The semi-conductor materials used are: AlGalnP for (333RTSC, 333YTSC) InGaN for (333B472C, 333BG2C, 333PG2C, 333W2C) Unit: mm Tol: +/- 0.2mm 5.9 φ5.0 o ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) Reverse Voltage Reverse Current (Vr =5V) Operating Temperature Range Storage Temperature Range Lead Soldering Temperature (1.6mm (1/16)From Body) 8.6 5 Volt 100µA -40oC To 85oC -40oC To 100oC 260oC For 5 Seconds 1.0 1.0 Max. 25.4 Min. 0.5 NOTES : 1. All dimensions are in millimeters. 2. Lead spacing is measured where the leads emerge from the package. 3. Protuded resin under flange is 1.5 mm (0.059") Max. 4. Specifications are subject to change without notice. 1.0 2.54 o PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) View Angle 2θ1/2(Deg) Emitted Color Lens Color Peak Wavelength λp (nm) GB-333RTSC Ultra Red Water Clear 635 2.0 2.8 20 3800.0 4200.0 16 GB-333YTSC Ultra Yellow Water Clear 590 2.0 2.8 20 3600.0 4800.0 16 GB-333B472C Blue Water Clear 470 2.8 4.5 20 2200.0 4900.0 16 GB-333BG2C Bluish Green Water Clear 505 2.8 4.5 20 4000.0 7000.0 16 GB-333PG2C Pure Green Water Clear 525 2.8 4.5 20 4000.0 7000.0 16 Water Clear TYPICAL CHROMATICITY COORDINATES 3.0 4.5 20 10000.0 16500.0 16 3.0 4.5 20 20000.0 25000.0 16 3.0 4.5 20 8000.0 12000.0 16 Part No. GB-333W2C White X GB-333W3C White Warm White Y 0.31 Y X 0.42 Y Iv (mcd) Min Typ. 0.32 TYPICAL CHROMATICITY COORDINATES Water Clear Rec. If (mA). 0.32 TYPICAL CHROMATICITY COORDINATES Water Clear X GB-333L2C 0.31 Vf (v) Min Max 0.39 CAUTION: Handing with care against static electricity TESTING CONDITION FOR EACH PARAMETER : PARAMETER: REVERSE VOLTAGE REVERSE CURRENT FORWARD VOLTAGE LUMINOUS INTENSITY VIEWING ANGLE RECOMMENDED OPERATING CURRENT SYMBOL Vr Ir Vf Iv 2θ1/2 If (Rec) 0o UNIT VOLT µA VOLT MCD DEGREE mA TEST CONDITION Vr = 5.0 Volt If = 20mA If = 20mA If = 20mA NOTE : The typical emission color (White) is described by the chromaticity coordinates X=0.31, Y=0.32 using the C I E Chromaticity Diagram. 10o 20o 30o C 40o 1.0 0.9 50o 0.8 60o 70o 0.7 80o 90o 0.5 0.3 0.1 0.2 0.4 SPATIAL DISTRIBUTION 0.6