STGB10NC60K - STGD10NC60K STGP10NC60K N-channel 600V - 10A - D2PAK / TO-220 / DPAK Short circuit rated PowerMESH™ IGBT General features Type VCES VCE(sat)Max @25°C IC @100°C STGB10NC60K STGP10NC60K STGD10NC60K 600V 600V 600v <2.5V <2.5V <2.5V 10A 10A 10A 3 1 3 1 2 D²PAK TO-220 ■ Lower on voltage drop (Vcesat) ■ Lower CRES / CIES ratio (no cross-conduction susceptibility) ■ Very soft ultra fast recovery antiparallel diode ■ Short circuit withstand time 10µs Description 3 1 DPAK Internal schematic diagram Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESH™ IGBTs, with outstanding performances. The suffix “K” identifies a family optimized for high frequency motor control applications with short circuit withstand capability. Applications ■ High frequency motor controls ■ SMPS and PFC in both hard switch and resonant topologies ■ Motor drivers Order codes Part number Marking Package Packaging STGB10NC60KT4 GB10NC60K D²PAK Tape & reel STGP10NC60K GP10NC60K TO-220 Tube STGD10NC60KT4 GD10NC60K DPAK Tape & reel February 2007 Rev 5 1/17 www.st.com 17 Contents STGB10NC60K - STGP10NC60K - STGD10NC60K Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2/17 ................................................ 9 STGB10NC60K - STGP10NC60K - STGD10NC60K 1 Electrical ratings Electrical ratings Table 1. Symbol Absolute maximum ratings Parameter Value Unit VCES Collector-emitter voltage (VGS = 0) 600 V IC(1) Collector current (continuous) at TC = 25°C 20 A IC(1) Collector current (continuous) at TC = 100°C 10 A Collector current (pulsed) 30 A VGE Gate-emitter voltage ±20 V PTOT Total dissipation at TC = 25°C 60 W Tstg Storage temperature – 55 to 150 °C Short circuit withstand time 10 µs Maximum lead temperature for soldering purpose (for 10sec. 1.6 mm from case) 300 °C Value Unit ICM(2) Tj Tscw Tl Operating junction temperature 1. Calculated according to the iterative formula: T –T JMAX C I ( T ) = ----------------------------------------------------------------------------------------------------C C R × V (T , I ) THJ – C CESAT ( MAX ) C C 2. Pulse width limited by max junction temperature Table 2. Symbol Thermal resistance Parameter Rthj-case Thermal resistance junction-case Max 2.08 °C/W Rthj-amb Thermal resistance junction-ambient Max 62.5 °C/W 3/17 Electrical characteristics 2 STGB10NC60K - STGP10NC60K - STGD10NC60K Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. Symbol Parameter VBR(CES) Collector-emitter breakdown voltage VCE(sat) Collector-emitter saturation VGE= 15V, IC= 5A voltage VGE= 15V, IC= 5A, Tc= 125°C VGE(th) Gate threshold voltage VCE= VGE, IC= 250 µA ICES Collector cut-off current (VGE = 0) VCE= Max Rating,TC= 25°C IGES gfs Table 4. Symbol Cies Coes Cres Qg Qge Qgc 4/17 Static Test conditions IC= 1mA, VGE= 0 Min. Typ. Max. 600 Unit V 2.2 1.8 2.5 V V 6.5 V VCE=Max Rating,TC= 125°C 150 1 µA mA Gate-emitter leakage current (VCE = 0) VGE= ±20V, VCE= 0 ±100 nA Forward transconductance VCE = 15V, IC= 5A 4.5 15 S Dynamic Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions VCE = 25V, f = 1MHz, VGE = 0 VCE = 390V, IC = 5A, VGE = 15V, (see Figure 16) Min. Typ. Max. Unit 380 46 8.5 pF pF pF 19 5 9 nC nC nC STGB10NC60K - STGP10NC60K - STGD10NC60K Table 5. Symbol Switching on/off (inductive load) Parameter td(on) Turn-on delay time tr Current rise time (di/dt)on Turn-on current slope td(on) Turn-on delay time tr Current rise time (di/dt)on Turn-on current slope tr(Voff) td(off) tf tr(Voff) td(off) tf Table 6. Symbol Eon(1) Eoff(2) Ets Eon(1) Eoff(2) Ets Electrical characteristics Test conditions Min. VCC = 390V, IC = 5A RG= 10Ω, VGE= 15V, Tj= 25°C (see Figure 17) VCC = 390V, IC = 5A RG= 10Ω, VGE= 15V, Tj=125°C (see Figure 17) Off voltage rise time Turn-off delay time Current fall time Vcc = 390V, IC = 5A, Off voltage rise time Turn-off delay time Current fall time Vcc = 390V, IC = 5A, RGE = 10Ω, VGE = 15V,TJ=25°C (see Figure 17) RGE=10Ω, VGE =15V, Tj=125°C (see Figure 17) Typ. Max. Unit 17 6 655 ns ns A/µs 16.5 6.5 575 ns ns A/µs 33 72 82 ns ns ns 60 106 136 ns ns ns Switching energy (inductive load) Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 390V, IC = 5A RG= 10Ω, VGE=15V, Tj=25°C (see Figure 17) VCC = 390V, IC = 5A RG= 10Ω, VGE= 15V, Tj= 125°C (see Figure 17) Min Typ Max Unit 55 85 140 µJ µJ µJ 87 162 249 µJ µJ µJ 1. Eon is the tun-on losses when a typical diode is used in the test circuit in figure 2. If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same temperature (25°C and 125°C) 2. Turn-off losses include also the tail of the collector current 5/17 Electrical characteristics STGB10NC60K - STGP10NC60K - STGD10NC60K 2.1 Electrical characteristics (curves) Figure 1. Output characteristics Figure 2. Transfer characteristics Figure 3. Transconductance Figure 4. Collector-emitter on voltage vs temperature Figure 5. Gate charge vs gate-source voltage Figure 6. 6/17 Capacitance variations STGB10NC60K - STGP10NC60K - STGD10NC60K Electrical characteristics Figure 7. Normalized gate threshold voltage vs temperature Figure 8. Collector-emitter on voltage vs collector current Figure 9. Normalized breakdown voltage vs temperature Figure 10. Switching losses vs temperature Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector current 7/17 Electrical characteristics Figure 13. Thermal impedance 8/17 STGB10NC60K - STGP10NC60K - STGD10NC60K Figure 14. Turn-off SOA STGB10NC60K - STGP10NC60K - STGD10NC60K 3 Test circuit Test circuit Figure 15. Test circuit for inductive load switching Figure 16. Gate charge test circuit Figure 17. Switching waveform Figure 18. Diode recovery time waveform 9/17 Package mechanical data 4 STGB10NC60K - STGP10NC60K - STGD10NC60K Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/17 STGB10NC60K - STGP10NC60K - STGD10NC60K Package mechanical data TO-220 MECHANICAL DATA DIM. mm. MIN. TYP inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 11/17 Package mechanical data STGB10NC60K - STGP10NC60K - STGD10NC60K D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 10.4 0.393 D1 E 8 10 E1 0.315 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 R 0º 0.126 0.015 4º 3 V2 0.4 1 12/17 STGB10NC60K - STGP10NC60K - STGD10NC60K Package mechanical data DPAK MECHANICAL DATA mm. inch DIM. MAX. MIN. A A1 A2 B b4 MIN. 2.2 0.9 0.03 0.64 5.2 2.4 1.1 0.23 0.9 5.4 0.086 0.035 0.001 0.025 0.204 0.094 0.043 0.009 0.035 0.212 C C2 D D1 E E1 0.45 0.48 6 0.6 0.6 6.2 0.017 0.019 0.236 0.023 0.023 0.244 6.6 0.252 e e1 H L (L1) L2 L4 R V2 TYP 5.1 6.4 0.090 4.6 10.1 0.173 0.368 0.039 2.8 0.8 0.181 0.397 0.110 0.031 1 0.023 0.2 0° 0.260 0.185 2.28 0.6 MAX. 0.200 4.7 4.4 9.35 1 TYP. 0.039 0.008 8° 0° 8° 0068772-F 13/17 Packaging mechanical data 5 STGB10NC60K - STGP10NC60K - STGD10NC60K Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 MAX. R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 * on sales type 14/17 inch 0.933 0.956 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STGB10NC60K - STGP10NC60K - STGD10NC60K Packaging mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 16.4 N 50 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 D 1.5 D1 1.5 E 1.65 MIN. 12.1 0.476 1.6 0.059 0.063 1.85 0.065 0.073 7.4 7.6 0.291 0.299 2.55 2.75 0.100 0.108 0.153 0.161 P0 3.9 4.1 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 40 15.7 MAX. 330 12.992 13.2 0.504 0.520 18.4 0.645 0.724 0.059 0.795 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 0.059 F R MIN. MAX. K0 W inch MAX. 1.574 16.3 0.618 0.641 15/17 Revision history 6 STGB10NC60K - STGP10NC60K - STGD10NC60K Revision history Table 7. 16/17 Revision history Date Revision Changes 21-Nov-2005 1 New release 06-Dic-2005 2 Inserted row on Table 1.: Absolute maximum ratings 06-Mar-2006 3 The document has been reformatted 06-Jun-2006 4 Inserted DPAK 08-Feb-2007 5 Description has been updated STGB10NC60K - STGP10NC60K - STGD10NC60K Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 17/17