STGB10NC60KD STGF10NC60KD - STGP10NC60KD N-channel 600V - 10A - D2PAK / TO-220 / TO-220FP Short circuit rated PowerMESH™ IGBT General features Type VCES VCE(sat)Max @25°C IC @100°C STGB10NC60KD STGP10NC60KD STGF10NC60KD 600V 600V 600V <2.5V <2.5V <2.5V 10A 10A 6A ■ Lower on voltage drop (Vcesat) ■ Lower CRES / CIES ratio (no cross-conduction susceptibility) ■ Very soft ultra fast recovery antiparallel diode ■ Short circuit withstand time 10µs Description 3 3 1 2 1 TO-220 2 TO-220FP 3 1 D²PAK Internal schematic diagram Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advaced family of IGBTs, the PowerMESH™ IGBTs, with outstanding performances. The suffix “K” identifies a family optimized for high frequency motor control applications with short circuit withstand capability. Applications ■ High frequency motor controls ■ SMPS and PFC in both hard switch and resonant topologies ■ Motor drivers Order codes Sales Type Marking Package Packaging STGB10NC60KDT4 GB10NC60KD D²PAK Tape & reel STGP10NC60KD GP10NC60KD TO-220 Tube STGF10NC60KD GF10NC60KD TO-220FP Tube March 2006 Rev 4 1/17 www.st.com 17 Contents: STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Contents: 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 Electrical characteristics (curves) ............................. 7 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2/17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Value Symbol Parameter Unit D²PAK/TO-220 TO-220FP VCES Collector-Emitter Voltage (VGS = 0) IC(1) Collector Current (continuous) at TC = 25°C 20 9 A IC(1) Collector Current (continuous) at TC = 100°C 10 6 A ICM(2) VGE IF 600 V Collector Current (pulsed) 30 A Gate-Emitter Voltage ±20 V Diode RMS Forward Current at Tc=25°C 10 A PTOT Total Dissipation at TC = 25°C 60 25 VISO Insulation Withstand Voltage A.C.(t=1sec;Tc=25°C) -- 2500 Tstg Storage Temperature Tj Tscw Tl W – 55 to 150 °C Short Circuit Withstand Time 10 µs Maximum Lead Temperature For Soldering Purpose (for 10sec. 1.6 mm from case) 300 °C Operating Junction Temperature 1. Calculated according to the iterative formula:: T –T J MAX C I ( T ) = --------------------------------------------------------------------------------------------------C C R ×V (T , I ) THJ – C CESAT ( MAX ) C C 2. Pulse width limited by max junction temperature Table 2. Symbol Rthj-case Rthj-amb Thermal resistance Parameter Value Unit TO-220/D²PAK 2.08 °C/W TO-220FP 5.0 °C/W 62.5 °C/W Thermal Resistance Junction-case Max Thermal Resistance Junction-ambient Max 3/17 Electrical characteristics 2 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. Symbol Parameter VBR(CES) Collector-Emitter Breakdown Voltage VCE(sat) Collector-Emitter Saturation Voltage VGE= 15V, IC= 5A, Tc= 125°C VGE(th) Gate Threshold Voltage VCE= VGE, IC= 250 µA ICES Collector cut-off Current (V GE = 0) VCE= Max Rating,TC= 25°C IGES Gate-Emitter Leakage Current (VCE = 0) gfs Table 4. Symbol Cies Coes Cres Qg Qge Qgc 4/17 Static Test Condictions IC= 1mA, VGE= 0 Min. Typ. Max. 600 VGE= 15V, IC= 5A Unit V 2 1.8 2.5 V V 6.5 V VCE=Max Rating,TC= 125°C 150 1 µA mA VGE= ±20V , VCE= 0 ±100 nA 4.5 Forward Transconductance VCE = 15V, IC= 5A 15 S Dynamic Parameter Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate-Emitter Charge Gate-Collector Charge Test Condictions VCE = 25V, f = 1MHz, VGE = 0 VCE = 390V, IC = 5A, VGE = 15V, (see Figure 18) Min. Typ. Max. Unit 380 46 8.5 pF pF pF 19 5 9 nC nC nC STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Table 5. Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(off) tf tr(Voff) td(off) tf Table 6. Symbol Eon (1) Eoff(2) Ets Eon (1) Eoff(2) Ets Electrical characteristics Switching on/off (inductive load) Parameter Turn-on Delay Time Current Rise Time Turn-on Current Slope Turn-on Delay Time Current Rise Time Turn-on Current Slope Off Voltage Rise Time Turn-off Delay Time Current Fall Time Off Voltage Rise Time Turn-off Delay Time Current Fall Time Test Condictions Min. VCC = 390V, IC = 5A RG= 10Ω, VGE= 15V, Tj= 25°C (see Figure 19) VCC = 390V, IC = 5A RG= 10Ω, VGE= 15V, Tj=125°C (see Figure 19) Vcc = 390V, IC = 5A, RGE = 10Ω , VGE = 15V,T J=25°C (see Figure 19) Vcc = 390V, IC = 5A, RGE=10Ω , VGE =15V, Tj=125°C (see Figure 19) Typ. Max. Unit 17 6 655 ns ns A/µs 16.5 6.5 575 ns ns A/µs 33 72 82 ns ns ns 60 106 136 ns ns ns Switching energy (inductive load) Parameter Turn-on Switching Losses Turn-off Switching Losses Total Switching Losses Turn-on Switching Losses Turn-off Switching Losses Total Switching Losses Test Condictions VCC = 390V, IC = 5A RG= 10Ω, V GE=15V, Tj=25°C (see Figure 19) VCC = 390V, IC = 5A RG= 10Ω, V GE= 15V, Tj= 125°C (see Figure 19) Min. Typ. Max. Unit 55 85 140 µJ µJ µJ 87 162 249 µJ µJ µJ 1. Eon is the tun-on losses when a typical diode is used in the test circuit in figure 2. If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same temperature (25°C and 125°C) 2. Turn-off losses include also the tail of the collector current 5/17 Electrical characteristics Table 7. Symbol Collector-emitter diode Parameter Test Condictions If = 2.5A Vf Forward On-Voltage trr Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current If = 5A ,VR = 30V, Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current If = 5A ,VR = 30V, Qrr Irrm trr Qrr Irrm 6/17 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD If = 2.5A, Tj = 125°C Tj = 25°C, di/dt = 100 A/µs (see Figure 20) Tj =125°C, di/dt = 100A/µs (see Figure 20) Min. Typ. Max. Unit 1.6 1.3 2.1 V V 23.5 16.5 1.4 ns nC A 39 39 2 ns nC A STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Electrical characteristics 2.1 Electrical characteristics (curves) Figure 1. Output characterisics Figure 2. Transfer characteristics Figure 3. Transconductance Figure 4. Collector-emitter on voltage vs temperature Figure 5. Gate charge vs gate-source voltage Figure 6. Capacitance variations 7/17 Electrical characteristics STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Figure 7. Normalized gate threshold voltage vs temperature Figure 8. Collector-emitter on voltage vs collector current Figure 9. Normalized breakdown voltage vs temperature Figure 10. Switching losses vs temperature Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector current 8/17 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Electrical characteristics Figure 13. Thermal Impedance for TO-220/ D²PAK Figure 14. Turn-off SOA Figure 15. Emitter-collector diode characteristics Figure 16. Thermal Impedance for TO-220FP 9/17 Test circuit 3 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Test circuit Figure 17. Test Circuit for Inductive Load Switching Figure 18. Gate charge test circuit Figure 19. Switching Waveform Figure 20. Diode Recovery Time Waveform 10/17 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 11/17 Package mechanical data STGB10NC60KD - STGP10NC60KD - STGF10NC60KD TO-220 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 12/17 TYP 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Package mechanical data D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 10.4 0.393 D1 E 8 10 E1 0.315 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 R 0º 0.126 0.015 4º 3 V2 0.4 1 13/17 Package mechanical data STGB10NC60KD - STGP10NC60KD - STGF10NC60KD TO-220FP MECHANICAL DATA mm. DIM. MIN. A 4.4 inch TYP MAX. MIN. TYP. 4.6 0.173 0.181 MAX. 0.106 B 2.5 2.7 0.098 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 0.409 L2 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 B D A E L7 L3 L6 F2 H G G1 F F1 L7 L2 14/17 L5 1 2 3 L4 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD 5 Packaging mechanical data Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 * on sales type 15/17 Revision history 6 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Revision history Table 8. 16/17 Revision history Date Revision Changes 14-Jun-2005 1 New Release 19-Jul-2005 2 Complete version 27-Jan-2006 3 Inserted ecopack indication 01-Mar-2006 4 New template STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 17/17