STMicroelectronics GB8NC60KD 600 v - 8 a - short circuit rugged igbt Datasheet

STGB8NC60KD - STGD8NC60KD
STGF8NC60KD - STGP8NC60KD
600 V - 8 A - short circuit rugged IGBT
Features
■
Lower on voltage drop (VCE(sat))
■
Lower CRES / CIES ratio (no cross-conduction
susceptibility)
■
Very soft ultra fast recovery antiparallel diode
■
Short circuit withstand time 10 µs
2
3
1
3
1
DPAK
2
TO-220
2
Applications
■
High frequency motor controls
3
3
■
SMPS and PFC in both hard switch and
resonant topologies
■
Motor drivers
Description
1
2
TO-220FP
Figure 1.
1
D²PAK
Internal schematic diagram
This IGBT utilizes the advanced PowerMESH™
process resulting in an excellent trade-off
between switching performance and low on-state
behavior.
Table 1.
Device summary
Order codes
Marking
Package
Packaging
STGB8NC60KDT4
GB8NC60KD
D²PAK
Tape and reel
STGD8NC60KDT4
GD8NC60KD
DPAK
Tape and reel
STGF8NC60KD
GF8NC60KD
TO-220FP
Tube
STGP8NC60KD
GP8NC60KD
TO-220
Tube
April 2008
Rev 2
1/18
www.st.com
18
Contents
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
............................. 7
3
Test circuit
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2/18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
1
Electrical ratings
Electrical ratings
Table 2.
Absolute maximum ratings
Value
Symbol
Parameter
Unit
D²PAK
DPAK TO-220FP
TO-220
VCES
Collector-emitter voltage (VGE = 0)
IC(1)
Collector current (continuous) at TC = 25 °C
15
7
A
IC(1)
Collector current (continuous) at TC = 100 °C
8
4
A
ICL(2)
Turn-off latching current
30
A
ICP(3)
Pulsed collector current
30
A
VGE
Gate-emitter voltage
±20
V
Diode RMS forward current at TC = 25 °C
7
A
IFSM
Surge not repetitive forward current
tp = 10 ms sinusoidal
20
A
VISO
Insulation withstand voltage (RMS) from all
three leads to external hea sink
( t=1 s; TC = 25 °C)
--
--
2500
V
PTOT
Total dissipation at TC = 25 °C
65
62
24
W
Tj
Operating junction temperature
IF
Tscw
600
Short circuit withstand time
(VCE = 0.5 VBR(CES) , TC = 125 °C, RG = 10 Ω,
VGE = 12 V)
V
– 55 to 150
°C
10
µs
1. Calculated according to the iterative formula:
T
–T
JMAX
C
I ( T ) = ----------------------------------------------------------------------------------------------------C C
R
× V
(T , I )
THJ – C
CESAT ( MAX ) C C
2. Vclamp = 80% (VCES), VGE=15 V, RG=10 Ω, TJ=150 °C
3. Pulse width limited by max junction temperature allowed
Table 3.
Thermal resistance
Value
Symbol
Parameter
D²PAK
TO-220
Unit
DPAK TO-220FP
Rthj-case
Thermal resistance junction-case max
IGBT
1.9
2.0
5.1
°C/W
Rthj-case
Thermal resistance junction-case max
diode
4
4.5
7
°C/W
Rthj-amb
Thermal resistance junction-ambient max
62.5
°C/W
3/18
Electrical characteristics
2
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Electrical characteristics
(TCASE=25°C unless otherwise specified)
Table 4.
Symbol
Static
Parameter
Collector-emitter
V(BR)CES breakdown voltage
(VGE= 0)
Test conditions
IC= 1 mA
VCE(sat)
Collector-emitter saturation VGE= 15 V, IC = 3 A
voltage
VGE= 15 V, IC = 3 A, TC = 125°C
VGE(th)
Gate threshold voltage
VCE= VGE, IC= 250 µA
ICES
Collector cut-off current
(VGE = 0)
VCE = 600 V
IGES
gfs (1)
Min.
Typ.
Max.
600
Unit
V
2.2
1.8
2.75
V
V
6.5
V
VCE = 600 V, TC = 125 °C
150
1
µA
mA
Gate-emitter leakage
current (VCE = 0)
VGE= ±20 V
±100
nA
Forward transconductance
VCE = 15 V, IC= 3 A
4.5
1.9
S
1. Pulse duration = 300 us, duty cycle 1.5 %
Table 5.
Symbol
Cies
Coes
Cres
Qg
Qge
Qgc
Table 6.
Symbol
td(on)
tr
(di/dt)on
td(on)
tr
(di/dt)on
4/18
Dynamic
Parameter
Input capacitance
Output capacitance
Reverse transfer
capacitance
Total gate charge
Gate-emitter charge
Gate-collector charge
Test conditions
Min.
VCE = 25 V, f = 1 MHz,
VGE = 0
VCE = 390 V, IC = 3 A,
VGE = 15 V,
(see Figure 20)
Typ. Max.
Unit
380
46
8.5
pF
pF
pF
19
5
9
nC
nC
nC
Switching on/off (inductive load)
Parameter
Turn-on delay time
Current rise time
Turn-on current slope
Turn-on delay time
Current rise time
Turn-on current slope
Test conditions
VCC = 390 V, IC = 3 A
RG= 10 Ω, VGE= 15 V
(see Figure 21)
VCC = 390 V, IC =3 A
RG= 10 Ω, VGE= 15 V,
TC = 125 °C
(see Figure 21)
Min.
Typ.
Max.
Unit
17
6
655
ns
ns
A/µs
16.5
6.5
575
ns
ns
A/µs
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Table 6.
Symbol
tr(Voff)
td(off)
tf
tr(Voff)
td(off)
tf
Table 7.
Symbol
Eon(1)
Eoff(2)
Ets
Eon(1)
Eoff(2)
Ets
Electrical characteristics
Switching on/off (inductive load) (continued)
Parameter
Off voltage rise time
Turn-off delay time
Current fall time
Off voltage rise time
Turn-off delay time
Current fall time
Test conditions
Min.
Vcc = 390 V, IC = 3 A,
RGE = 10 Ω, VGE =15 V
(see Figure 21)
Vcc = 390 V, IC = 3 A,
RGE=10 Ω, VGE =15 V,
TC = 125 °C
Typ.
Max.
Unit
33
72
82
ns
ns
ns
60
106
136
ns
ns
ns
(see Figure 21)
Switching energy (inductive load)
Parameter
Turn-on switching losses
Turn-off switching losses
Total switching losses
Turn-on switching losses
Turn-off switching losses
Total switching losses
Test conditions
Min.
VCC = 390 V, IC = 3 A
RG= 10 Ω, VGE=15 V
(see Figure 21)
VCC = 390 V, IC = 3 A
RG= 10 Ω, VGE= 15 V,
TC = 125 °C
Typ.
Max.
Unit
55
85
140
µJ
µJ
µJ
87
162
249
µJ
µJ
µJ
(see Figure 21)
1. Eon is the turn-on losses when a typical diode is used in the test circuit in figure 2. If the IGBT is offered in
a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the
same temperature (25°C and 125°C)
2. Turn-off losses include also the tail of the collector current
Table 8.
Symbol
Collector-emitter diode
Parameter
VF
Forward on-voltage
trr
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Qrr
Irrm
trr
Qrr
Irrm
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Test conditions
IF = 3 A
IF = 3 A, TC = 125 °C
IF = 3 A, VR = 30 V,
di/dt = 100 A/µs
(see Figure 22)
IF = 3 A,VR = 30 V,
TC =125 °C, di/dt = 100 A/µs
(see Figure 22)
Min.
Typ.
Max.
Unit
1.6
1.3
2.1
V
V
23.5
16.5
1.4
ns
nC
A
39
39
2
ns
nC
A
5/18
Electrical characteristics
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
2.1
Electrical characteristics (curves)
Figure 2.
Output characteristics
Figure 3.
Transfer characteristics
Figure 4.
Transconductance
Figure 5.
Collector-emitter on voltage vs
temperature
Figure 6.
Gate charge vs gate-source voltage Figure 7.
6/18
Capacitance variations
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Figure 8.
Normalized gate threshold voltage
vs temperature
Figure 10. Normalized breakdown voltage vs
temperature
Figure 9.
Electrical characteristics
Collector-emitter on voltage vs
collector current
Figure 11. Switching losses vs temperature
Figure 12. Switching losses vs gate resistance Figure 13. Switching losses vs collector
current
7/18
Electrical characteristics
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Figure 14. Thermal impedance for TO-220/
D²PAK
Figure 15. Turn-off SOA
Figure 16. Forward voltage drop versus
forward current
Figure 17. Thermal impedance for DPAK
Figure 18. Thermal impedance for TO-220FP
8/18
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
3
Test circuit
Test circuit
Figure 19. Test circuit for inductive load
switching
Figure 20. Gate charge test circuit
Figure 21. Switching waveform
Figure 22. Diode recovery time waveform
9/18
Package mechanical data
4
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in compliance
with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also
marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
10/18
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Package mechanical data
TO-220 mechanical data
mm
inch
Dim
Min
A
b
b1
c
D
D1
E
e
e1
F
H1
J1
L
L1
L20
L30
∅P
Q
Typ
4.40
0.61
1.14
0.48
15.25
Max
Min
4.60
0.88
1.70
0.70
15.75
0.173
0.024
0.044
0.019
0.6
10.40
2.70
5.15
1.32
6.60
2.72
14
3.93
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
1.27
10
2.40
4.95
1.23
6.20
2.40
13
3.50
Max
0.181
0.034
0.066
0.027
0.62
0.050
16.40
28.90
3.75
2.65
Typ
0.409
0.106
0.202
0.051
0.256
0.107
0.551
0.154
0.645
1.137
3.85
2.95
0.147
0.104
0.151
0.116
11/18
Package mechanical data
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
TO-252 (DPAK) mechanical data
DIM.
mm.
min.
typ
max.
A
2.20
2.40
A1
0.90
1.10
A2
0.03
0.23
b
0.64
0.90
b4
5.20
5.40
c
0.45
0.60
c2
0.48
0.60
D
6.00
D1
E
6.20
5.10
6.40
E1
6.60
4.70
e
2.28
e1
4.40
4.60
H
9.35
10.10
L
1
L1
2.80
L2
L4
0.80
0.60
R
V2
1
0.20
0o
8o
0068772_G
12/18
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Package mechanical data
D²PAK (TO-263) mechanical data
mm
inch
Dim
Min
A
A1
b
b2
c
c2
D
D1
E
E1
e
e1
H
J1
L
L1
L2
R
V2
Typ
4.40
0.03
0.70
1.14
0.45
1.23
8.95
7.50
10
8.50
Max
Min
4.60
0.23
0.93
1.70
0.60
1.36
9.35
0.173
0.001
0.027
0.045
0.017
0.048
0.352
0.295
0.394
0.334
10.40
2.54
4.88
15
2.49
2.29
1.27
1.30
Max
0.181
0.009
0.037
0.067
0.024
0.053
0.368
0.409
0.1
5.28
15.85
2.69
2.79
1.40
1.75
0.192
0.590
0.099
0.090
0.05
0.051
8°
0°
0.4
0°
Typ
0.208
0.624
0.106
0.110
0.055
0.069
0.016
8°
0079457_M
13/18
Package mechanical data
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
TO-220FP mechanical data
mm.
Dim.
Min.
A
4.40
inch
Typ
Max.
Min.
4.60
0.173
Typ.
0.181
Max.
B
2.5
2.7
0.098
0.106
D
2.5
2.75
0.098
0.108
E
0.45
0.70
0.017
0.027
F
0.75
1.00
0.030
0.039
F1
1.15
1.50
0.045
0.067
F2
1.15
1.50
0.045
0.067
G
4.95
5.20
0.195
0.204
G1
2.40
2.70
0.094
0.106
H
10
10.40
0.393
L2
16
0.409
0.630
28.6
30.6
1.126
L4
9.80
10.60
0.385
1.204
0.417
L5
2.9
3.6
0.114
0.141
L6
15.90
16.40
0.626
0.645
L7
9
9.30
0.354
0.366
Dia
3
3.2
0.118
0.126
B
D
A
E
L3
L3
L6
F2
H
G
G1
Dia
F
F1
L7
L2
L5
1 2 3
L4
7012510-I
14/18
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
5
Packaging mechanical data
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
1.5
C
12.8
D
20.2
G
24.4
N
100
T
TAPE MECHANICAL DATA
DIM.
mm
inch
MIN.
MAX.
MIN.
A0
10.5
10.7
0.413 0.421
B0
15.7
15.9
0.618 0.626
D
1.5
1.6
0.059 0.063
D1
1.59
1.61
0.062 0.063
E
1.65
1.85
0.065 0.073
F
11.4
11.6
0.449 0.456
K0
4.8
5.0
0.189 0.197
P0
3.9
4.1
0.153 0.161
P1
11.9
12.1
0.468 0.476
P2
1.9
2.1
0.075 0.082
inch
MAX.
MIN.
MAX.
330
12.992
13.2
0.504 0.520
26.4
0.960 1.039
0.059
0795
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
1000
MAX.
R
50
1.574
T
0.25
0.35 0.0098 0.0137
W
23.7
24.3
0.933 0.956
* on sales type
15/18
Packaging mechanical data
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM.
mm
MIN.
A
B
1.5
C
12.8
D
20.2
G
16.4
N
50
T
TAPE MECHANICAL DATA
DIM.
mm
MIN.
MAX.
A0
6.8
7
0.267 0.275
B0
10.4
10.6
0.409 0.417
B1
D
16/18
inch
1.5
D1
1.5
E
1.65
MIN.
MAX.
12.1
0.476
1.6
0.059 0.063
1.85
0.065 0.073
0.059
F
7.4
7.6
0.291 0.299
K0
2.55
2.75
0.100 0.108
0.153 0.161
P0
3.9
4.1
P1
7.9
8.1
0.311 0.319
P2
1.9
2.1
0.075 0.082
R
40
W
15.7
1.574
16.3
0.618
0.641
inch
MAX.
MIN.
MAX.
330
12.992
13.2
0.504 0.520
18.4
0.645 0.724
0.059
0.795
1.968
22.4
0.881
BASE QTY
BULK QTY
2500
2500
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
6
Revision history
Revision history
Table 9.
Document revision history
Date
Revision
Changes
02-Oct-2007
1
First release
01-Apr-2008
2
Updated Figure 14 and Figure 17
17/18
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
18/18