GBJ/KBJ6A/8A/10A SERIES Voltage Range 50 to 1000 Volts Current 6.0/8.0/10.0 Amperes SINGLE PHASE 6.0/8.0/10.0 AMPS. GLASS PASSIVATED BRIDGE RECTIFIERS FEATURES *Rating to 1000V PRV .150(3.8) .134(3.4) *Ideal for printed circuit board *Low forward voltage drop,high current capability *Reliable low cost construction utiliaing molded plastic technique results in inexpensive product *The plastic material has UL flammability classification 94V-0 .106(2.7) .096(2.3) .094(2.4) .078(2.0) + ~ ~ - .043(1.1) .035(0.9) .165(4.2) 190(5.0) .150(3.8) .708(18.0) .800(20.3) .669(17.0) .697(17.7) .441(11.2) .425(10.8) 1.193(30.3) 1.169(29.7) .203(5.16) .189(4.8) .134(3.1) .122(3.1) HOLE FOR NO. 6 SCREW *UL Recognized File #230084 .114(2.9) .098(2.5) .031(0.8) .023(0.6) .402(10.2) .303(7.7) .303(7.7) SPACING .386(9.8) .287(7.3) .287(7.3) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Rating at 25 C ambient temperature unless otherwise specified. Sing phase,half wave,50Hz,resistive or inductive load. For capacitive load, derate current by 20% GBJKBJ GBJKBJ GBJKBJ GBJKBJ GBJKBJ GBJKBJ GBJKBJ 6/8/10 6/8/10 UNITS 6/8/10 6/8/10 6/8/10 6/8/10 6/8/10 06 10 01 02 04 005 08 Type Number Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward o(with heatsink Note 2) Rectified Current@TC = 100 C(without heatsink) Peak Forward Surge Current 8.3ms single half sine-wave super imposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage Drop Per leg @ 3.0A/4.0A/5.0A Maximun DC Reverse Current at Rated DC Blocking Voltage 2 I t Rating for fusing (t<8.3ms) o TJ = 25 Co TJ = 125 C IF(AV) 6.0/8.0/10.0 2.8/2.9/3.0 A IFSM 170 A VF 1.0/1.0/1.05 V IR 5.0 500 uA 120 A2 S 2 It CJ Typical Junction Capacitance 55 per Leg (Note 1) R*JC Typical Thermal Resistance (Note 2) 1.8/1.6/1.4 TJ Operating Temperature Range -55 to+150 TSTG Storage Temperature Range -55 to+150 NOTES: 1. Measured at 1.0MHZ and applied reverse voltage of 4.0 V DC. 2.GBJ/KBJ6005 Thru GBJ/KBJ610: Device mounted on 75mm x 75mm x 1.6mm Cu Plate Heatsink. GBJ/KBJ8005 Thru GBJ/KBJ810: Device mounted on 100mm x 100mm x 1.6mm Cu Plate Heatsink. GBJ/KBJ10005 Thru GBJ/KBJ1010: Device mounted on 150mm x 150mm x 1.6mm Cu Plate Heatsink. pF o C/W o o C C RATING AND CHARACTERISTIC CURVES GBJ/KBJ6A/8A/10A SERIES GBJ/KBJ6A thru GBJ/KBJ6M GBJ/KBJ8A thru GBJ/KBJ8M 4.0 3.0 WITHOUT HEATSINK 2.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 140 8.0 FIG.1-3 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES AVERAGE FORWARD CURRENT AMPERES WITH HEATSINK 5.0 WITH HEATSINK 7.0 6.0 5.0 4.0 WTHOUT HEATSINK 3.0 2.0 1.0 0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 20 40 60 80 100 120 140 10.0 CASE TEMPERATURE, C WITH HEATSINK 8.0 6.0 4.0 WTHOUT HEATSINK 2.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 1.0 CASE TEMPERATURE,0C 0 0 20 40 60 80 100 120 140 CASE TEMPERATURE,0C FIG.3 - TYPICAL FORWARD CHARACTERISTICS 100 180 160 140 120 100 80 60 40 20 0 CAPACITANCE.(pF) PEAK FORWARD SURGE CURRENT AMPERES FIG.2-MAXIMUM NON-REPETITIVE SURGE CURRENT 10 Single Half-Sine-Wave (JEDEC METOHO) 1 2 5 10 20 NUMBER OF CYCLES AT 60Hz 50 TJ=250C,f=1MHz 100 1.0 1.0 FIG.4 - TYPICAL FORWARD CHARACTERISTICS 100 1000 1.0 0.1 TJ=250C PULSE WIDTH 300us 0.01 4.0 10.0 REVERSE VOLTAGE,VOLTS FIG.5-TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT,(uA) 0.0 GBJ/KBJ10A thru GBJ/KBJ10M FIG.1-2 - FORWARD CURRENT DERATING CURVE 6.0 INSTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT AMPERES FIG.1-1 - FORWARD CURRENT DERATING CURVE 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 1.6 1.8 TJ=1250C 100 TJ=1000C 10 TJ=500C 1.0 TJ=250C 0.1 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%)