Bussmann® 5 x 20mm Ferrule Fuses GDA GDA-V Fast Acting, High Breaking Capacity Dimensional Data Time-Current Characteristic Curves–Average Melt 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 38.10mm (±.38) 5.54mm (±.20) 21.10mm (±.81) 10mm 20mm (±2.0) (±0.5) 100 38.10mm (±.38) 5.2mm (+0.1/-0.2) 10 .81mm (REF) TIME IN SECONDS Ceramic tube - end caps: nickel or silver-plated brass. CATALOG SYMBOL: GDA FAST ACTING HIGH BREAKING CAPACITY 250 VOLTS AC OR LESS UL RECOGNIZED: (GUIDE #JDYX2, FILE #E75865) Limits for Pre-arcing Time 1.5 In MIN In 2.1 In MAX AMPERE RATING 1 .1 2.75 In MIN MAX 4 In 10 In MAX MIN MAX 50mA - 3.15A 60 min. 30 min. 10 ms. 2 sec. 3 ms. 300 ms. 20 ms. 4A - 10A 60 min. 30 min. 10 ms. 3 sec. 3 ms. 300 ms. 20 ms. 1.1 In: Æt ² 70°C, 125mA - 3A. Product Symbol Lead 100 10 Packaging & Ordering Information: 1 .01 .1 1.0 In: Æt ² 70°C, 4A. CURRENT IN AMPERES Ampere Rating Package Code Blank (None) V Axial Leads GDA only .0329 x 1.59 Copper Tinned GDA S501† Markings: MFG mark, Rated Current, Rated Voltage, Characteristic Symbol, Breaking Capacity Symbol, Approvals where Applicable. † S501 is a European designation. In North America use GDA respectively when referencing product, except 8 and 10A. CE logo denotes compliance with European Union Low Voltage Directive (50-1000 VAC, 75-1500 VDC). Refer to BIF document #8002 or contact Bussmann Application Engineering at 314-527-1270 for more information. 12-18-98 SB98107 Rev. A Form No. GDA Page 1 of 2 BIF Doc #2014 Bussmann® 5 x 20mm Ferrule Fuses GDA GDA-V Fast Acting, High Breaking Capacity • UR IMQ Pre-arcing Value (I2t) (A2s) typ. 0.0017 0.0005 0.0011 0.0018 0.0037 0.008 0.020 0.027 0.010 0.018 0.038 0.064 0.097 0.480 0.9 1.9 2.0 3.9 8.1 14 25 48 100 160 SEMKO Power Dissipation (W) max. 1.1 0.36 0.44 0.52 0.6 0.64 0.75 0.82 1.1 1.2 1.3 1.5 1.3 0.83 0.83 0.83 1.5 1.6 1.7 1.9 2.5 3.0 VDE Current Rated Voltage Rating Voltage Breaking Drop (In) (V) Capacity (mV) max. 50mA 9000 63mA 3300 80mA 2600 100mA 2300 125mA 1900 160mA 1600 200mA 1350 250mA 1300 315mA 1400 400mA 1500A 1200 500mA 250 250V, 50Hz 1050 630mA cos ø Å 0.7 - 0.8 1200 800mA 490 1A 230 1.25A 200 1.6A 180 2A 205 2.5A 190 3.15A 160 4A 160 5A 155 6.3A 150 8A* ** 140 10A* ** 140 *IEC Standard 127, Sheet I does not include ratings above 6.3A. **Product is available only as S501 series. BSI Electrical Characteristics • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-18-98 SB98107 Rev. A Form No. GDA Page 2 of 2 BIF Doc #2014