GI1-1200 THRU GI1-1600 MINIATURE HIGH VOLTAGE GLASS PASSIVATED RECTIFIER Reverse Voltage - 1200 to 1600 Volts FEATURES DO204AP P A T E N T E D * ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction package ♦ 1.0 Ampere operation at TA=75°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ Hermetically sealed package ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension 0.034 (0.86) 0.028 (0.71) DIA. Forward Current - 1.0 Ampere 1.0 (25.4) MIN. 0.240 (6.1) MAX. 0.150 (3.8) 0.100 (2.5) DIA. MECHANICAL DATA 1.0 (25.4) MIN. Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 Case: JEDEC DO-204AP solid glass body Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.02 ounce, 0.56 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS GI1-1200 GI1-1400 GI1-1600 UNITS Maximum repetitive peak reverse voltage VRRM 1200 1400 1600 Volts Maximum RMS voltage VRMS 840 980 1120 Volts Maximum DC blocking voltage VDC 1200 1400 1600 Volts Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=75°C I(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30.0 Amps Maximum instantaneous forward voltage at 1.0A 3.14A VF 1.1 1.3 Volts Maximum DC reverse current at rated DC blocking voltage IR 10.0 100.0 µA Maximum reverse recovery time (NOTE 1) tfr 25.0 µs Maximum forward recovery time (NOTE 2) trr 1.0 µs Typical junction capacitance (NOTE 3) CJ 15.0 pF RΘJA 55.0 °C/W TJ,TSTG -65 to +175 °C TA= 25°C TA=100°C Typical thermal resistance (NOTE 4) Operating junction and storage temperature range NOTES: (1) Measured on Tektronix Type "S" recovery plug-in, Tektronix 545 scope or equivalent IFM=20mA, IRM=2mA (2) Measured on Tektronix Type "S" recovery plug-in, Tektronix 545 or equivalent, I FM=20mA (3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (4) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted 4/98 RATINGS AND CHARACTERISTIC CURVES GI1-1200 AND GI1-1600 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 1.25 Ipk/IAV=π 1.0 50 60 HZ RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE 1.5 0.75 CAPACITANCE LOAD 5.0 Ipk/IAV= 10 20 0.5 0.25 0 20 40 60 80 100 120 140 160 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 TA=25°C NO LOAD CONDITION 30 20 TJ=TJ max. RATED LOAD CONDITIONS 10 180 0 AMBIENT TEMPERATURE, °C 1 10 100 NUMBER OF CYCLES AT 60 HZ FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 TJ=150°C PULSE WIDTH=300µs 1% DUTY CYCLE 1 TJ=25°C 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 TJ=125°C 1 TJ=75°C 0.1 TJ=25°C 0.01 0 1.6 20 FIG. 5 - TYPICAL JUNCTION CAPACITANCE 30 TJ=25°C f=1.0 MHz Vsig=50mVp-p 10 1 1 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % INSTANTANEOUS FORWARD VOLTAGE, VOLTS JUNCTION CAPACITANCE, pF INSTANTANEOUS FORWARD CURRENT, AMPERES 10 10 REVERSE VOLTAGE, VOLTS 100 100