GL05T to GL24T www.vishay.com Vishay Semiconductors Low Capacitance ESD Protection Diodes for High-Speed Data Interfaces FEATURES • IEC 61000-4-5 (lightning) see IPPM below 3 • ESD-protection acc. IEC 61000-4-2 ± 8 kV contact discharge ± 15 kV air discharge 1 • Small package for use in portable electronics 2 • Space saving SOT-23 package 17416 20512 1 • High temperature soldering 260 °C/10 s at terminals YYY guaranteed: • Low capacitance for high speed data lines, cellular handsets, USB port protection, LAN equipment, peripherals XX XX MARKING (example only) • AEC-Q101 qualified • e3 - Sn 20357 • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC Bar = cathode marking YYY = type code (see table below) XX = date code Note ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 ORDERING INFORMATION ENVIRONMENTAL STATUS DEVICE NAME GL05T GL12T GL15T GL24T ORDERING CODE Standard GL05T-GS08 Green GL05T-V-G-08 Standard GL12T-GS08 Green GL12T-V-G-08 Standard GL15T-GS08 Green GL15T-V-G-08 Standard GL24T-GS08 Green GL24T-V-G-08 TAPED UNITS PER REEL (8 mm TAPE ON 7" REEL) MINIMUM ORDER QUANTITY 3000 15 000 3000 15 000 3000 15 000 3000 15 000 PACKAGE DATA MOLDING COMPOUND DEVICE PACKAGE TYPE ENVIRONMENTAL WEIGHT FLAMMABILITY RATING NAME NAME CODE STATUS GL05T GL12T GL15T GL24T SOLDERING CONDITIONS L05 Standard 8.8 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals L06 Green 8.1 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals L12 Standard 8.8 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals L13 Green 8.1 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals L15 Standard 8.8 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals L16 Green 8.1 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals L24 Standard 8.8 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals L25 Green 8.1 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals SOT-23 SOT-23 SOT-23 SOT-23 Rev. 1.8, 09-Jun-11 MOISTURE SENSITIVITY LEVEL 1 Document Number: 85809 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GL05T to GL24T www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS GL05T PARAMETER TEST CONDITIONS SYMBOL VALUE Peak pulse current 8/20 μs IPPM 17 A Peak pulse power 8/20 μs waveform PPP 300 W ESD immunity Operating temperature Contact discharge acc. IEC 61000-4-2; 10 pulses Air discharge acc. IEC 61000-4-2; 10 pulses Junction temperature Storage temperature VESD UNIT ±8 kV ± 15 kV TJ - 55 to + 125 °C TSTG - 55 to + 150 °C UNIT ABSOLUTE MAXIMUM RATINGS GL12T PARAMETER TEST CONDITIONS SYMBOL VALUE Peak pulse current 8/20 μs IPPM 12 A Peak pulse power 8/20 μs waveform PPP 300 W ±8 kV ESD immunity Operating temperature Contact discharge acc. IEC 61000-4-2; 10 pulses Air discharge acc. IEC 61000-4-2; 10 pulses Junction temperature Storage temperature VESD ± 15 kV TJ - 55 to + 125 °C TSTG - 55 to + 150 °C UNIT ABSOLUTE MAXIMUM RATINGS GL15T PARAMETER TEST CONDITIONS SYMBOL VALUE Peak pulse current 8/20 μs IPPM 10 A Peak pulse power 8/20 μs waveform PPP 300 W ESD immunity Operating temperature Contact discharge acc. IEC 61000-4-2; 10 pulses Air discharge acc. IEC 61000-4-2; 10 pulses Junction temperature Storage temperature VESD ±8 kV ± 15 kV TJ - 55 to + 125 °C TSTG - 55 to + 150 °C UNIT ABSOLUTE MAXIMUM RATINGS GL24T PARAMETER TEST CONDITIONS SYMBOL VALUE Peak pulse current 8/20 μs IPPM 5 A Peak pulse power 8/20 μs waveform PPP 300 W ESD immunity Operating temperature Contact discharge acc. IEC 61000-4-2; 10 pulses Air discharge acc. IEC 61000-4-2; 10 pulses Junction temperature Storage temperature ±8 kV ± 15 kV TJ - 55 to + 125 °C TSTG - 55 to + 150 °C VESD ELECTRICAL CHARACTERISTICS GL05T PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Number of lines which can be protected Nchannel - - - lines Reverse stand-off voltage at IR = 1 μA VRWM - - 5 V Reverse current at VR = 5 V IR - - 20 μA Reverse breakdown voltage at IR = 1 mA VBR 6 - - V - - 9.8 V - - 11 V - 5 - pF Protection paths Reverse clamping voltage Capacitance Rev. 1.8, 09-Jun-11 at IPP = 1 A VC at IPP = 5 A at VR = 0 V; f = 1 MHz CD 2 Document Number: 85809 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GL05T to GL24T www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS GL12T PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Number of lines which can be protected Nchannel - - - lines Reverse stand-off voltage at IR = 1 μA VRWM - - 12 V Reverse current at VR = 5 V IR - - 1 μA Reverse breakdown voltage at IR = 1 mA VBR 13.3 - - V - - 19 V Protection paths at IPP = 1 A Reverse clamping voltage VC at IPP = 5 A at VR = 0 V; f = 1 MHz Capacitance - - 24 V CD - 5 - pF ELECTRICAL CHARACTERISTICS GL15T PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Number of lines which can be protected Nchannel - - - lines Reverse stand-off voltage at IR = 1 μA VRWM - - 15 V Reverse current at VR = 5 V IR - - 1 μA Reverse breakdown voltage at IR = 1 mA VBR 16.7 - - V - - 24 V Protection paths at IPP = 1 A Reverse clamping voltage VC at IPP = 5 A at VR = 0 V; f = 1 MHz Capacitance - - 33 V CD - 5 - pF ELECTRICAL CHARACTERISTICS GL24T PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Number of lines which can be protected Nchannel - - - lines Reverse stand-off voltage at IR = 1 μA VRWM - - 24 V Reverse current at VR = 5 V IR - - 1 μA Reverse breakdown voltage at IR = 1 mA VBR 26.7 - - V - - 43 V - - 55 V - 5 - pF Protection paths at IPP = 1 A Reverse clamping voltage VC at IPP = 5 A at VR = 0 V; f = 1 MHz Capacitance CD PACKAGE DIMENSIONS in millimeters (inches): SOT-23 1.15 (0.045) o8 ° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.1 (0.004) max. 0.550 ref. (0.022 ref.) 0.9 (0.035) 3.1 (0.122) 2.8 (0.110) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0° t 0.5 (0.020) 0.45 (0.018) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) 0.7 (0.028) 1 (0.039) 0.9 (0.035) 0.95 (0.037) 0.9 (0.035) 1.43 (0.056) Foot print recommendation: 2 (0.079) 1 (0.039) 0.9 (0.035) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 0.95 (0.037) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Rev. 1.8, 09-Jun-11 3 Document Number: 85809 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 GL05T to GL24T www.vishay.com Vishay Semiconductors Pin 1 - Location LLP1713 Top view Pad layout - view from top seen at bottom side Pin 1 - Location LLP2513 Top view Pad layout - view from top seen at bottom side Pin 1 - Location LLP3313 Top view Rev. 1.8, 09-Jun-11 Pad layout - view from top seen at bottom side 4 Document Number: 85809 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SOT-23 SOT-23 Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches) 1.15 (0.045) 8° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.1 (0.004) max. 0.550 ref. (0.022 ref.) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0° t o 0.5 (0.020) 0.45 (0.018) 0.9 (0.035) 3.1 (0.122) 2.8 (0.110) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) 0.7 (0.028) 0.95 (0.037) 0.9 (0.035) 1.43 (0.056) 1 (0.039) 0.9 (0.035) Foot print recommendation: 2 (0.079) 1 (0.039) 0.9 (0.035) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 0.95 (0.037) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Document Number: 84004 Rev. 1.3, 01-Jul-10 For technical questions within your region, please contact one of the following: Diodes [email protected], [email protected], [email protected] www.vishay.com 28 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1