o Part Numbering Chip Monolithic Ceramic Capacitors (Part Number) GR M 18 8 q w e r t B1 1H y 102 K u i A01 D o rDimension (T) qProduct ID wSeries Product ID GR ER GQ GM GN LL GJ GA !0 Code Dimension (T) Code Series 2 0.2mm J Soft Termination Type 2 2-elements (Array Type) M Tin Plated Layer 3 0.3mm 4 Only for Information Devices / Tip & Ring 4 4-elements (Array Type) 7 Only for Camera Flash Circuit 5 0.5mm B High Frequency Type 6 0.6mm M High Frequency for Flow/Reflow Soldering 7 0.7mm 8 0.8mm A Monolithic Microchip 9 0.85mm D for Bonding A 1.0mm M Capacitor Array B 1.25mm L Low ESL Type C 1.6mm R Controlled ESR Low ESL Type D 2.0mm 2.5mm A 8-termination Low ESL Type E M 10-termination Low ESL Type F 3.2mm M High Frequency Low Loss Type M 1.15mm 2 for AC250V (r.m.s.) N 1.35mm 3 Safety Standard Certified Type Q 1.5mm R 1.8mm eDimension (LgW) Code Dimension (LgW) EIA 02 0.4g0.2mm 01005 03 0.6g0.3mm 0201 05 0.5g0.5mm 0202 08 0.8g0.8mm 0303 0D 0.38g0.38mm 015015 0M 0.9g0.6mm 0302 11 1.25g1.0mm 0504 15 1.0g0.5mm 0402 18 1.6g0.8mm 0603 1M 1.37g1.0mm 0504 21 2.0g1.25mm 0805 22 2.8g2.8mm 1111 31 3.2g1.6mm 1206 32 3.2g2.5mm 1210 42 4.5g2.0mm 1808 43 4.5g3.2mm 1812 52 5.7g2.8mm 2211 55 5.7g5.0mm 2220 S 2.8mm X Depends on individual standards. With the array type GNM series, "Dimension(T)" indicates the number of elements. Continued on the following page. Continued from the preceding page. tTemperature Characteristics Temperature Characteristic Codes Code Public STD Code Temperature Characteristics Reference Temperature Temperature Range Capacitance Change or Temperature Coefficient Operating Temperature Range 1X SL *1 JIS 20°C 20 to 85°C +350 to -1000ppm/°C -55 to 125°C 2C CH *1 JIS 20°C 20 to 125°C 0±60ppm/°C -55 to 125°C 2P PH *1 JIS 20°C 20 to 85°C -150±60ppm/°C -25 to 85°C 2R RH *1 JIS 20°C 20 to 85°C -220±60ppm/°C -25 to 85°C 2S SH *1 JIS 20°C 20 to 85°C -330±60ppm/°C -25 to 85°C 2T TH *1 JIS 20°C 20 to 85°C -470±60ppm/°C -25 to 85°C 3C CJ *1 JIS 20°C 20 to 125°C 0±120ppm/°C -55 to 125°C 3P PJ *1 JIS 20°C 20 to 85°C -150±120ppm/°C -25 to 85°C 3R RJ *1 JIS 20°C 20 to 85°C -220±120ppm/°C -25 to 85°C 3S SJ *1 JIS 20°C 20 to 85°C -330±120ppm/°C -25 to 85°C -25 to 85°C 3T TJ *1 JIS 20°C 20 to 85°C -470±120ppm/°C 3U UJ *1 JIS 20°C 20 to 85°C -750±120ppm/°C -25 to 85°C 4C CK *1 JIS 20°C 20 to 125°C 0±250ppm/°C -55 to 125°C 5C C0G *1 EIA 25°C 25 to 125°C 0±30ppm/°C -55 to 125°C 5G X8G *1 EIA 25°C 25 to 150°C 0±30ppm/°C -55 to 150°C 6C C0H *1 EIA 25°C 25 to 125°C 0±60ppm/°C -55 to 125°C 6P P2H *1 EIA 25°C 25 to 85°C -150±60ppm/°C -55 to 125°C 6R R2H *1 EIA 25°C 25 to 85°C -220±60ppm/°C -55 to 125°C 6S S2H *1 EIA 25°C 25 to 85°C -330±60ppm/°C -55 to 125°C 6T T2H *1 EIA 25°C 25 to 85°C -470±60ppm/°C -55 to 125°C 7U U2J *1 EIA 25°C 25 to 125°C *6 -750±120ppm/°C -55 to 125°C B1 B *2 JIS 20°C -25 to 85°C ±10% -25 to 85°C B3 B JIS 20°C -25 to 85°C ±10% -25 to 85°C C7 X7S EIA 25°C -55 to 125°C ±22% -55 to 125°C C8 X6S EIA 25°C -55 to 105°C ±22% -55 to 105°C D7 X7T EIA 25°C -55 to 125°C +22, -33% -55 to 125°C D8 X6T EIA 25°C -55 to 105°C +22, -33% -55 to 105°C E7 X7U EIA 25°C -55 to 125°C +22, -56% -55 to 125°C -25 to 85°C F1 F *2 JIS 20°C -25 to 85°C +30, -80% F5 Y5V EIA 25°C -30 to 85°C +22, -82% -30 to 85°C L8 X8L *3 25°C -55 to 150°C +15, -40% -55 to 150°C R1 R *2 JIS 20°C -55 to 125°C ±15% -55 to 125°C R3 R JIS 20°C -55 to 125°C ±15% -55 to 125°C R6 X5R EIA 25°C -55 to 85°C ±15% -55 to 85°C R7 X7R EIA 25°C -55 to 125°C ±15% -55 to 125°C R9 X8R EIA 25°C -55 to 150°C ±15% -55 to 150°C W0 - - 25°C -55 to 125°C *1 Please refer to table for Capacitance Change under reference temperature. *2 Capacitance change is specified with 50% rated voltage applied. *3 Murata Temperature Characteristic Code. *4 Apply DC350V bias. *5 No DC bias. *6 Rated Voltage 100Vdc max : 25 to 85°C ±10% *4 +22, -33% *5 -55 to 125°C Continued on the following page. Continued from the preceding page. oCapacitance Change from each temperature JIS Code Capacitance Change from 20°C (%) Murata Code –55°C –25°C –10°C Max. Min. Max. Min. Max. 1X – – – – – Min. – 2C 0.82 –0.45 0.49 –0.27 0.33 –0.18 2P – – 1.32 0.41 0.88 0.27 2R – – 1.70 0.72 1.13 0.48 2S – – 2.30 1.22 1.54 0.81 2T – – 3.07 1.85 2.05 1.23 3C 1.37 –0.90 0.82 –0.54 0.55 –0.36 3P – – 1.65 0.14 1.10 0.09 3R – – 2.03 0.45 1.35 0.30 3S – – 2.63 0.95 1.76 0.63 3T – – 3.40 1.58 2.27 1.05 3U – – 4.94 2.84 3.29 1.89 4C 2.56 –1.88 1.54 –1.13 1.02 –0.75 EIA Code Capacitance Change from 25°C (%) Murata Code –55°C –30°C –10°C Max. Min. Max. Min. Max. Min. 0.58 –0.24 0.40 –0.17 0.25 –0.11 6C 0.87 –0.48 0.59 –0.33 0.38 –0.21 6P 2.33 0.72 1.61 0.50 1.02 0.32 6R 3.02 1.28 2.08 0.88 1.32 0.56 5C/5G 6S 4.09 2.16 2.81 1.49 1.79 0.95 6T 5.46 3.28 3.75 2.26 2.39 1.44 7U 8.78 5.04 6.04 3.47 3.84 2.21 yRated Voltage uCapacitance 0J DC6.3V Expressed by three-digit alphanumerics. The unit is pico-farad (pF). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two numbers.If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits. 1A DC10V Ex.) Code Capacitance 1C DC16V R50 0.5pF 1E DC25V 1R0 1.0pF YA DC35V 100 10pF 1H DC50V 103 10000pF 2A DC100V 2D DC200V 2E DC250V YD DC300V 2H DC500V 2J DC630V 3A DC1kV Code Rated Voltage 0E DC2.5V 0G DC4V 3D DC2kV 3F DC3.15kV BB DC350V (for Camera Flash Circuit) E2 AC250V GB X2; AC250V (Safety Standard Certified Type GB) GC X1/Y2; AC250V (Safety Standard Certified Type GC) GD Y3; AC250V (Safety Standard Certified Type GD) GF Y2, X1/Y2; AC250V (Safety Standard Certified Type GF) Continued on the following page. Continued from the preceding page. iCapacitance Tolerance Capacitance Step Code Capacitance Tolerance TC Series W ±0.05pF C∆ GRM/GJM V9.9pF 0.1pF GRM/GJM V9.9pF 0.1pF V1pF 0.1pF ±0.1pF B C∆ GQM ERB V9.9pF 1pF Step and E24 Series C∆ GRM/GJM V9.9pF 0.1pF except C∆ GRM V5pF * 1pF ERB V9.9pF 1pF Step and E24 Series V1pF 0.1pF ±0.25pF C C∆ ±0.5pF D GRM/GJM 5.1 to 9.9pF 0.1pF GRM 5.1 to 9.9pF * 1pF C∆ ERB/GQM C∆ GJM U10pF E12 Series C∆ GQM/ERB U10pF E24 Series E12 Series GRM/GA3 U10pF C∆ ERB/GQM/GJM U10pF B, R, X7R, X5R, ZLM GRJ/GRM/GR7/GA3 C0G GNM E6 Series GR4, GMD E12 Series B, R, X7R, X7S GRM/GMA E6 Series X5R, X7R, X7S GNM E3 Series X7R GA2 E3 Series X5R, X7R, X7S, X6S LLL/LLR/LLA/LLM E3 Series F, Y5V GRM E3 Series +80%, -20% R Depends on individual standards. * E24 series is also available. oIndividual Specification Code Expressed by three figures. !0Packaging Code Packaging L ø180mm Embossed Taping D ø180mm Paper Taping E ø180mm Paper Taping (LLL15) K ø330mm Embossed Taping J ø330mm Paper Taping F ø330mm Paper Taping (LLL15) B Bulk C Bulk Case T Bulk Tray E24 Series E6 Series B, R, X7R, X5R, ZLM ±20% M 5.1 to 9.9pF 1pF Step and E24 Series C∆–SL ±10% K Z C∆ ±5% J 1.1 to 9.9pF 1pF Step and E24 Series except C∆ ±2% G GQM 1.1 to 9.9pF 1pF Step and E24 Series