Murata GRM0225C1C6R2CD05 Chip monolithic ceramic capacitor Datasheet

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Explanation of Symbols in This Catalog
Derating Voltage and temperature derating recommended product
This product is suitable when a voltage continuously applied
to a capacitor in an operating circuit, is used below (derated)
the rated voltage of the capacitor.
This model guarantees the test conditions in the endurance test,
at a rated voltage x 100% at the maximum operating temperature.
A reliability assurance level equivalent to a common product
can be secured, by using this product within the voltage and
temperature derated conditions recommended in the figure below.
Low dissipation for high frequency
HiQ By devising ceramic materials and electrode materials,
low dissipation is achieved in frequency bands of VHF,
UHF and microwave or beyond.
Low
ESL
Low inductance
This capacitor is designed so that
the parasitic inductance component (ESL)
that the capacitor has on the high frequency
side becomes lower.
Anti- Product suitable for acoustic noise reduction and low distortion
noise This product suppresses acoustic noise,
which occurs when a ceramic capacitor is used,
by devising the materials and configuration.
Deflecting Product resistant to deflection cracking
crack This capacitor is designed to prevent failures as much
as possible by short mode caused by cracking
when there is board deflection.
Soldering Product with solder cracking suppression
crack This capacitor is configured with metal terminals
s
Recommended Conditions of the Derating Operating Voltage and Temperature
Operating Voltage/Rated Voltage (%)
Ultra- L x W dimension: products of 0.6 x 0.3 mm or less
compact
120
100
125°C Type
105°C Type
85°C Type
80
60
40
20
0
0
25
50
75
100
Product Temperature (°C)
and leads connected to the chip.
The metal terminals and leads relieve the stress from expansion
and contraction of the solder, to suppress solder cracking.
s All
EU RoHS
Compliant
the products in this catalog comply with EU RoHS.
RoHS is "the European Directive 2011/65/EU on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment."
s For more details, please refer to our website 'Murata's Approach for EU RoHS'
(http://www.murata.com/info/rohs.html).
s EU
For General Purpose
Pur ose
e GRM Series Capacitance Table
125
150
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Contents
Oct.1,2012
Chip Monolithic Ceramic Capacitors
(Medium Voltage)
Cap. Table
For General Purpose
GRM (250Vdc min.)/GRJ/GR3 Series
Product specifications
ecifications are as of
July 2012.
Selection Guide
p2
Capacitance Table
p3
Part Numbering
Temperature Compensating Type
GRM Series (250Vdc min.)
High Dielectric Constant Type
GRM Series (250Vdc min.)
Soft Termination Type GRJ Series
Large Capacitance and High Allowable
Ripple Current GR3 Series
p136 separate volume
p143 separate volume
p148
p11
p153
p11
p158
p161
p165
p12
p12
p12
AC250V Type (Which Meet Japanese Law)
GA2 Series
p169
p12
Only for Applications
p15
For LCD Backlight Inverter Circuit
GRM/DC3.15kV Series
For Information Devices GR4 Series
For Camera Flash Circuit GR7 Series
Chip Monolithic Ceramic Capacitors
Cap. Table
For General Purpose GRM Series
(Less than 250Vdc)
p21 separate volume
Safety Standard Certified GA3 Series
UL, IEC60384-14 Class X1/Y2 Type GC
IEC60384-14 Class Y2, X1/Y2 Type GF
IEC60384-14 Class Y3 Type GD
IEC60384-14 Class X2 Type GB
Capacitor Array GNM Series
p76
p4
Low ESL LLL/LLR/LLA/LLM Series
p79
p5
Reference Data (Typical Example)
Package
!Caution/Notice
High-Q Type GJM Series
p82
p7
Metal Terminal Monolithic
Ceramic Capacitors
p173
p174
p176
p177
p13
p13
p13
p13
p182
p185
p188
Cap. Table
High Frequency GQM Series
p104
p8
For General Purpose KRM/KR3 Series
High Capacitance for General Use
KRM Series
Large Capacitance and High Allowable
Ripple Current KR3 Series
Monolithic Microchip GMA Series
p113
p115
p118
p204
p14
p208
p210
p10
ISO 9001 Certifications
p215
Introduction of Website SimSurfing
p216
EMICON-FUN!
!Caution/Notice
p14
p9
Package
!Caution/Notice
For Bonding GMD Series
p200
p217
Product Information p218
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Selection Guide For Chip Monolithic Ceramic Capacitors
Function
Type
High Capacitance
Series
GRM (X5R, X7R, Y5V etc.)
68pF–150μF
Decoupling, Smoothing
Array (2 or 4 Elements)
GNM
470pF–2.2μF
GRM (C0G)
Frequency Control/Tuning,
Impedance Matching
0.1pF–0.1μF
Class 1 TC's
GRM (U2J etc.)
High Speed Decoupling
Low Inductance
(Reverse Geometry)
2200pF–10μF
Low Inductance
(Controlled ESR)
1.0μF
Low Inductance
(Multi-Termination)
Low ESR, Ultra Small
LLL
LLR
LLA/LLM (From 1GHz)
0.01μF–4.7μF
GJM (500MHz to 10GHz)
0.1pF–47pF
High Frequency
Applications?
Lowest ESR
GQM (500MHz to 10GHz)
0.1pF–100pF
Optical Communications
Wire-Die-Bonding
GMA 100pF–0.47μF
GMD 100pF–0.47μF
250Vdc min.
High-Frequency Snubber
250V/630V/1kV/2kV/3.15kV
Low Dissipation
GRM (C0G, U2J)
250Vdc min.
LCD Backlight Inverter
3.15kV
Low Dissipation
GRM (C0G)
250V/630V/1kV
High Capacitance
GRM (X7R)
250V/630V/1kV
Soft Termination
GRJ (X7R)
250Vdc min.
Decoupling, Smoothing
250Vdc min.
For Camera Flash Circuit only
250Vdc min.
For Information Devices only
10pF–47000pF
5pF–47pF
220pF–1μF
470pF–1μF
250V/450V/630V
Large Capacitance and
High Allowable Ripple Current
10000pF–1μF
350V
High Capacitance
10000pF–47000pF
2kV
High Capacitance
100pF–10000pF
Safety Standard
Certified
Type GD 10pF–4700pF
Type GF 10pF–4700pF
Safety Standard
Certified
Type GC 100pF–330pF
Type GF 470pF–4700pF
Type GB 10000pF–56000pF
AC250V which meets
Japanese Law
470pF–0.1μF
GR3 (X7T)
GR7
GR4
AC Lines Noise Removal
Automotive
(Powertrain,
Safety Equipment)
250Vdc min. for Automotive
(Powertrain, Safety Equipment)
2
High Capacitance
Class 1 TC's
GA2
GCM (X7R etc.)
100pF–47μF
GCM (C0G etc.)
1.0pF–56000pF
250V/630V/1kV
Low Dissipation
10pF–47000pF
250V/630V
Soft Termination
1000pF–0.47μF
GCM (U2J)
GCJ (X7R)
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Capacitance Table
o Temperature Characteristics Table
Temperature
Characteristic Codes
Temperature Characteristics
Public
STD Code
Reference
Temperature Capacitance Change
or Temperature
Temperature
Range
Coefficient
Operating
Temperature
Range
Capacitance Change Each Temperature (%)
–55°C
–25°C
–10°C
Max.
Min.
Max.
Min.
Max.
Min.
C0G
EIA
25°C
25 to 125°C
0±30ppm/°C
–55 to 125°C
0.58
–0.24
0.4
–0.17
0.25
–0.11
C0H
EIA
25°C
25 to 125°C
0±60ppm/°C
–55 to 125°C
0.87
–0.48
0.59
–0.33
0.38
–0.21
–0.75
CK
JIS
20°C
20 to 125°C
0±250ppm/°C
–55 to 125°C
2.56
–1.88
1.54
–1.13
1.02
CJ
JIS
20°C
20 to 125°C
0±120ppm/°C
–55 to 125°C
1.37
–0.9
0.82
–0.54
0.55
–0.36
CH
JIS
20°C
20 to 125°C
0±60ppm/°C
–55 to 125°C
0.82
–0.45
0.49
–0.27
0.33
–0.18
SL
JIS
20°C
20 to 85°C
+350 to –1000ppm/°C
–55 to 125°C
-
-
-
-
-
-
P2H
EIA
25°C
25 to 85°C
–150±60ppm/°C
–55 to 125°C
2.33
0.72
1.61
0.5
1.02
0.32
PK
JIS
20°C
20 to 85°C
–150±250ppm/°C
–25 to 85°C
-
-
2.36
–0.45
1.57
–0.3
PJ
JIS
20°C
20 to 85°C
–150±120ppm/°C
–25 to 85°C
-
-
1.65
0.14
1.1
0.09
PH
JIS
20°C
20 to 85°C
–150±60ppm/°C
–25 to 85°C
-
-
1.32
0.41
0.88
0.27
R2H
EIA
25°C
25 to 85°C
–220±60ppm/°C
–55 to 125°C
3.02
1.28
2.08
0.88
1.32
0.56
RK
JIS
20°C
20 to 85°C
–220±250ppm/°C
–25 to 85°C
-
-
2.74
–0.14
1.83
–0.09
RJ
JIS
20°C
20 to 85°C
–220±120ppm/°C
–25 to 85°C
-
-
2.03
0.45
1.35
0.3
RH
JIS
20°C
20 to 85°C
–220±60ppm/°C
–25 to 85°C
-
-
1.7
0.72
1.13
0.48
S2H
EIA
25°C
25 to 85°C
–330±60ppm/°C
–55 to 125°C
4.09
2.16
2.81
1.49
1.79
0.95
SK
JIS
20°C
20 to 85°C
–330±250ppm/°C
–25 to 85°C
-
-
3.35
0.36
2.23
0.24
SJ
JIS
20°C
20 to 85°C
–330±120ppm/°C
–25 to 85°C
-
-
2.63
0.95
1.76
0.63
–330±60ppm/°C
–25 to 85°C
-
-
2.3
1.22
SH
JIS
20°C
20 to 85°C
1.54
0.81
T2H
EIA
25°C
25 to 85°C
–470±60ppm/°C
–55 to 125°C
5.46
3.28
3.75
2.26
2.39
1.44
TK
JIS
20°C
20 to 85°C
–470±250ppm/°C
–25 to 85°C
-
-
4.12
0.99
2.74
0.66
TJ
JIS
20°C
20 to 85°C
–470±120ppm/°C
–25 to 85°C
-
-
3.4
1.58
2.27
1.05
TH
JIS
20°C
20 to 85°C
–470±60ppm/°C
–25 to 85°C
-
-
3.07
1.85
2.05
1.23
U2J
EIA
25°C
25 to 125°C
–750±120ppm/°C
–55 to 125°C
8.78
5.04
6.04
3.47
3.84
2.21
UK
JIS
20°C
20 to 85°C
–750±250ppm/°C
–25 to 85°C
-
-
5.65
2.25
3.77
1.5
UJ
JIS
20°C
20 to 85°C
–750±120ppm/°C
–25 to 85°C
-
-
4.94
2.84
3.29
1.89
X7R
EIA
25°C
–55 to 125°C
±15%
–55 to 125°C
-
-
-
-
-
-
X7S
EIA
25°C
–55 to 125°C
±22%
–55 to 125°C
-
-
-
-
-
-
X7T
EIA
25°C
–55 to 125°C
+22%, –33%
–55 to 125°C
-
-
-
-
-
-
-
-
X7U
EIA
25°C
–55 to 125°C
+22%, –56%
–55 to 125°C
-
-
-
-
R
JIS
20°C
–55 to 125°C
±15%
–55 to 125°C
-
-
-
-
-
-
X6S
EIA
25°C
–55 to 105°C
±22%
–55 to 105°C
-
-
-
-
-
-
X6T
EIA
25°C
–55 to 105°C
+22%, –33%
–55 to 105°C
-
-
-
-
-
-
X5R
EIA
25°C
–55 to 85°C
±15%
–55 to 85°C
-
-
-
-
-
-
–55 to 85°C
-
-
-
-
X5S
EIA
25°C
–55 to 85°C
±22%
-
-
B
JIS
20°C
–25 to 85°C
±10%
–25 to 85°C
-
-
-
-
-
-
25°C
–55 to 125°C
±10%
–55 to 125°C
-
-
-
-
-
-
-: Murata Temperature Characteristic
c GRM Series
Chip Monolithic Ceramic Capacitors
For General Purpose GRM Series
Capacitance Tabl
Table
le
For the Capacitance Table of General Purpose GRM Series,
please review the inserted Capacitance Table of
"Chip Monolithic Ceramic Capacitor and General Purpose GRM Series".
3
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
c GRM Series Temperature Compensating Type
p00
← Part Number List
CK
JIS:
EIA: C0G
L×W (mm)
T max. (mm)
Cap. / TC Code C0G
CH
SL
PK
PJ
P2H
R2H
S2H
T2H
U2J
PH
0.4×0.2
0.6×0.3
0.22
0.33
16
Rated Voltage (Vdc)
CJ
10
CΔ
C0G
50
CH
C0G
CΔ
RK
RJ
RH
SK
SJ
R2H
RΔ
S2H
TK
TJ
TH
UK
UJ
1.0×0.5
0.33
25
UΔ
SH
SΔ
0.55
50
T2H
TΔ
UJ
50
C0G
CΔ
C0G
CΔ
p38
p39
p42
P2H
PΔ
R2H
RΔ
p28
p32
p36
0.2pF
p22
p25
p28
p32
p36
p38
p39
p42
0.5pF
p22
p25
p28
p32
p36
p38
p39
p42
1.0pF
p22
p25
p28
p32
p35
p35
p35
p35
p36
p36
p36
p37
p38
p39
p42
p46
p46
p46
p46
2.0pF
p22
p25
p29
p32
p35
p35
p35
p36
p36
p36
p36
p37
p38
p39
p43
p46
p46
p46
p46
p32
p35
p35
p35
p36
p36
p36
p36
p37
p38
p39
p43
p46
p46
p46
p46
0.1pF
3.0pF
p22
p25
p29
4.0pF
p23
p26
p29
p33
p35
p35
p35
p36
p36
p36
p36
p37
p38
p40
p43
p46
p46
p46
p46
5.0pF
p23
p26
p30
p33
p35
p35
p35
p36
p36
p36
p36
p37
p38
p40
p44
p46
p46
p46
p46
6.0pF
p23
p26
p30
p33
p35
p35
p35
p36
p36
p36
p36
p37
p38
p40
p44
p46
p46
p46
p46
7.0pF
p24
p27
p30
p34
p35
p35
p35
p36
p36
p36
p36
p37
p38
p41
p44
p46
p46
p46
p46
8.0pF
p24
p27
p31
p34
p35
p35
p35
p36
p36
p36
p36
p37
p38
p41
p45
p46
p46
p46
p46
p41
p45
9.0pF
p24
p28
p31
p34
p35
p35
p35
p36
p36
p36
p36
p37
p38
p46
p46
p46
p46
10pF
p25
p28
p31
p35
p35
p35
p35
p36
p36
p36
p36
p37
p38
p42
p45
p46
p46
p46
p46
12pF
p25
p28
p31
p35
p35
p35
p35
p36
p36
p36
p36
p37
p39
p42
p45
p46
p46
p46
p46
15pF
p25
p28
p31
p35
p35
p35
p35
p36
p36
p36
p36
p37
p39
p42
p45
p46
p46
p46
p46
18pF
p25
p28
p31
p35
p35
p35
p36
p36
p36
p36
p36
p37
p39
p42
p45
p46
p46
p46
p46
p36
p36
p36
p37
p39
p42
p45
p46
p46
p46
p46
p46
p46
p46
p46
p46
p46
22pF
p25
p28
p31
p35
p35
p35
p36
p36
27pF
p25
p28
p31
p35
p35
p35
p36
p36
p36
p36
p36
p37
p39
p42
p46
33pF
p25
p28
p31
p35
p35
p35
p36
p36
p36
p36
p36
p37
p39
p42
p46
39pF
p25
p28
p32
p35
p35
p35
p36
p36
p36
p36
p36
p37
p39
p42
p46
47pF
p25
p28
p32
p35
p35
p35
p36
p36
p36
p36
p36
p37
p39
p42
p46
p35
p35
p35
p36
p36
p36
p36
p36
p37
p39
p42
p46
56pF
p28
p28
p32
68pF
p28
p28
p32
p35
p35
p35
p36
p36
p36
p36
p36
p37
p39
p42
p46
82pF
p28
p28
p32
p35
p35
p35
p36
p36
p36
p36
p36
p37
p39
p42
p46
100pF
p28
p28
p32
p35
p35
p35
p36
p36
p36
p36
p36
p37
p39
p42
p46
120pF
p37
p39
p42
p46
150pF
p37
p39
p42
p46
p38
p39
p42
p46
p38
p39
p42
p46
p38
p39
p42
p46
p38
p39
p42
p46
390pF
p38
p39
p42
p46
470pF
p38
p39
p42
p46
560pF
p38
p39
p42
p46
680pF
p38
p39
p42
p46
820pF
p42
p46
1000pF
p42
p46
180pF
220pF
270pF
330pF
separate volume 1
The indication for every 0.1 pF has
been omitted for less than 10 pF.
Refer to the Part Number List for
details.
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ c GRM Series Temperature Compensating Type)
p00
← Part Number List
JIS:
CK
EIA: C0G
CJ
CH
SL
PK
PJ
P2H
R2H
S2H
T2H
U2J
PH
RK
RJ
RH
SK
1.0×0.5
L×W (mm)
Cap. / TC Code S2H
10
SΔ
T2H
TΔ
UΔ
TK
0.5
50
Rated Voltage (Vdc)
SH
TJ
SL
U2J
UJ
SL
U2J
10
UJ
SL
U2J
100
UJ
CΔ
C0G
CΔ
p48
p51
p55
p58
p48
p51
p55
p58
p48
p52
p55
p58
p49
p52
p55
p59
p49
p52
p55
p59
p46
p47
p47
p47
p47
2.0pF
p46
p47
p47
p47
p47
3.0pF
p46
p47
p47
p47
p47
4.0pF
p46
p47
p47
p47
p47
5.0pF
p46
p47
p47
p47
p47
p49
p52
p56
p59
6.0pF
p46
p47
p47
p47
p47
p49
p53
p56
p59
p47
p50
p53
p56
p60
p60
p47
p47
p47
UJ
SL
U2J
UJ
SL
50
C0G
1.0pF
p47
UK
0.9
50
0.5pF
7.0pF
TH
1.6×0.8
0.55
T max. (mm)
SJ
The indication for every 0.1 pF has
been omitted for less than 10 pF.
Refer to the Part Number List for
details.
8.0pF
p47
p47
p47
p47
p47
p50
p54
p57
9.0pF
p47
p47
p47
p47
p47
p51
p54
p57
p61
10pF
p47
p47
p47
p47
p47
p51
p54
p58
p61
12pF
p47
p47
p47
p47
p47
p51
p54
p58
p61
15pF
p47
p47
p47
p47
p47
p51
p54
p58
p61
18pF
p47
p47
p47
p47
p47
p51
p54
p58
p61
22pF
p47
p47
p47
p47
p47
p51
p54
p58
p61
27pF
p47
p47
p47
p47
p47
p51
p54
p58
p61
33pF
p47
p47
p47
p47
p47
p51
p54
p58
p61
39pF
p47
p47
p47
p47
p47
p51
p54
p58
p61
47pF
p47
p47
p47
p51
p54
p58
p61
56pF
p47
p47
p47
p51
p54
p58
p61
68pF
p47
p47
p47
p51
p54
p58
p61
p54
p58
p61
10
82pF
p47
p47
p47
p51
100pF
p47
p47
p47
p51
p54
p58
p61
120pF
p47
p51
p54
p58
p61
150pF
p47
p51
p54
p58
p61
180pF
p47
p51
p54
p58
p61
220pF
p51
p54
p58
p61
270pF
p51
p54
p58
p61
330pF
p51
p54
p58
p61
390pF
p51
p54
p58
p61
470pF
p51
p54
p58
p61
560pF
p51
p54
p58
p61
680pF
p51
p54
p58
p61
820pF
p51
p54
p58
p61
1000pF
p51
p54
p58
p61
1200pF
p51
p54
p58
p61
p61
p61
p61
p58
p61
p61
p61
p61
p47
p47
p48
p51
p55
p61
1500pF
p47
p47
p48
1800pF
p47
p47
p48
p58
p61
p61
p61
p61
2200pF
p47
p48
p48
p48
p48
p48
p58
p61
p61
p61
p61
2700pF
p47
p48
p48
p48
p48
p48
p58
p61
p61
p61
p61
3300pF
p47
p48
p48
p48
p48
p48
p58
p61
p61
p61
p61
3900pF
p47
p48
p48
p48
p48
p48
p58
p61
p61
p61
p61
4700pF
p47
p48
p48
p48
p48
p48
p61
p61
p61
5600pF
p48
p48
p48
p61
p61
p62
6800pF
p48
p48
p48
p61
p61
p62
8200pF
p48
p48
p48
p61
p61
p62
10000pF
p48
p48
p48
p61
p61
p62
12000pF
p62
15000pF
p62
18000pF
p62
22000pF
p62
separate volume 2
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ c GRM Series Temperature Compensating Type)
p00
← Part Number List
CK
JIS:
EIA: C0G
L×W (mm)
CJ
CH
SL
PK
PJ
P2H
R2H
S2H
T2H
U2J
PH
RK
1.6×0.8
T max. (mm)
0.9
Rated Voltage (Vdc)
10
Cap. / TC Code U2J
RJ
SK
SJ
SH
TK
TJ
TH
UK
UJ
2.0×1.25
0.7
100
UJ
RH
C0G
CH
0.95
50
C0G
CH
SL
1
50
U2J
UJ
C0G
CH
SL
10
U2J
UJ
SL
U2J
250
UJ
C0G U2J
10pF
p136
12pF
p136
15pF
p136
18pF
p136
22pF
p136
27pF
p136
33pF
p136
39pF
p136
47pF
p136
56pF
p136
68pF
p136
82pF
50
SL
U2J
UJ
p62
p62
p63
p136
100pF
p62
p62
p136 p137
120pF
p62
p62
p136 p137
150pF
p62
p62
p136 p137
180pF
p62
p62
p136 p137
220pF
p62
p62
p136 p137
270pF
p62
p62
p136 p137
330pF
p62
p62
p136 p137
390pF
p62
p62
p137
470pF
p62
p62
p137
560pF
p62
p62
p137
680pF
p62
p62
p137
820pF
p62
p62
p137
1000pF
p62
p62
1200pF
p62
p62
p62
p62
p138
1500pF
p62
p62
p62
p62
p138
1800pF
p62
p62
p62
p62
p138
2200pF
p62
p62
p62
p62
p138
2700pF
p62
p62
p62
p62
3300pF
p62
p62
p137
p62
p62
3900pF
p62
p62
4700pF
p62
p62
5600pF
p62
p62
6800pF
p62
p62
8200pF
p62
p62
p62
p62
p62
10000pF
12000pF
p62
p62
p62
p62
p62
p62
p62
15000pF
p62
p62
p62
p62
p62
p62
p62
18000pF
p62
p62
p62
p62
p62
22000pF
p62
p62
27000pF
p62
p62
p62
p62
p62
p62
33000pF
39000pF
47000pF
56000pF
separate volume 3
p62
p62
p62
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ c GRM Series Temperature Compensating Type)
p00
← Part Number List
JIS:
CK
EIA: C0G
CJ
CH
SL
PK
PJ
P2H
R2H
S2H
T2H
U2J
PH
RK
RJ
RH
SK
SJ
2.0×1.25
L×W (mm)
1.45
50
Rated Voltage (Vdc)
Cap. / TC Code C0G
CH
SL
10
U2J
UJ
TK
TJ
TH
UK
UJ
3.2×1.6
1.35
T max. (mm)
SH
SL
U2J
250
UJ
0.95
100
U2J C0G
CH
1
50
C0G
CH
SL
2000
U2J
UJ
1000
630
U2J C0G U2J C0G U2J
10pF
p139 p137 p139 p136 p138
12pF
p139 p137 p139 p136 p138
15pF
p139 p137 p139 p136 p138
18pF
p139 p137 p139 p136 p138
22pF
p139 p137 p139 p137 p138
27pF
p139 p137 p139 p137 p138
33pF
p139 p137 p139 p137 p138
39pF
p139 p137 p139 p137 p138
47pF
p139 p137 p139 p137 p138
56pF
p139 p137 p139 p137 p138
68pF
p139 p137 p139 p137 p138
82pF
p137 p139 p137 p138
100pF
p137 p139 p137 p138
120pF
p137 p139 p137 p138
150pF
p137 p139 p137 p138
180pF
p137 p139 p137 p138
220pF
p137 p139 p137 p138
270pF
p139 p137 p138
330pF
p139 p137 p138
390pF
p137 p138
470pF
p137 p138
560pF
p137 p138
680pF
p138
820pF
p138
1000pF
p138
1200pF
p138
1500pF
p138
1800pF
p63
p63
p138
2200pF
p63
p63
p138
250
U2J
2700pF
p138
p63
p63
p138
3300pF
p138
p63
p63
p138
3900pF
p138
p63
p63
p138
4700pF
p138
p63
p63
p138
5600pF
p138
p63
p63
p138
6800pF
p63
p63
8200pF
p63
p63
10000pF
p63
p63
12000pF
p63
p63
p63
p63
15000pF
p63
p63
p63
p63
18000pF
p63
p63
p63
p63
p63
p63
22000pF
p63
p63
p63
p63
p63
p63
27000pF
p63
p63
33000pF
p63
p63
p63
p63
39000pF
p63
p63
p63
47000pF
p63
p63
p63
56000pF
p63
68000pF
p63
p63
p63
82000pF
p63
p63
p63
0.1μF
p63
p63
p63
p63
p63
separate volume 4
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ c GRM Series Temperature Compensating Type)
p00
← Part Number List
JIS:
CK
EIA: C0G
CJ
CH
SL
PK
PJ
P2H
R2H
S2H
T2H
U2J
Cap. / TC Code U2J
RK
RJ
RH
SK
SJ
SH
3.2×1.6
L×W (mm)
630
C0G U2J
1.8
250
50
U2J C0G
CH
SL
TK
TJ
TH
UK
UJ
3.2×2.5
1.25
T max. (mm)
Rated Voltage (Vdc) 1000
PH
1000 630
U2J
UJ
U2J
1
1.5
2
2000 630 2000 1000 630 1000 630 1000 630
50
U2J C0G
1.25
CH
U2J
82pF
p140
100pF
p140
120pF
p140
150pF
p140
U2J
U2J
180pF
p140
220pF
p140
U2J
U2J
U2J
U2J
U2J
U2J
270pF
330pF
390pF p139
470pF p139
560pF p139
680pF p139 p137
820pF
p137
p139
1000pF
p137
p139
1200pF
p138
1500pF
p138
1800pF
p138
p139
2200pF
p138
p139
2700pF
p138
3300pF
p138
3900pF
p138
4700pF
p138
5600pF
p139
p139
p138
6800pF
p138
8200pF
p138
p138
10000pF
p138
p139
p138
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
p63
p63
56000pF
p63
p63
68000pF
p63
p63
p63
p63
p63
82000pF
p63
p63
p63
p63
p63
0.1μF
p63
p63
p63
p63
p63
separate volume 5
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ c GRM Series Temperature Compensating Type)
p00
← Part Number List
JIS:
CK
EIA: C0G
L×W (mm) 4.5×
2.0
T max. (mm)
1
CH
SL
PK
PJ
P2H
R2H
S2H
T2H
U2J
4.5×3.2
1.5
Rated Voltage (Vdc) 3150 1000
Cap. / TC Code U2J
CJ
U2J
PH
RK
RJ
RH
SK
SJ
SH
TK
TJ
TH
UK
UJ
5.7×5.0
2
1.5
2
630 1000 630 1000 630 1000 630
U2J
U2J
U2J
U2J
U2J
U2J
U2J
27pF p140
33pF p140
39pF p140
47pF p140
56pF p140
68pF p140
82pF p140
100pF p140
120pF
150pF
180pF
220pF
270pF
330pF
390pF
470pF
560pF
680pF
820pF
1000pF
1200pF
1500pF
1800pF
2200pF
2700pF
p139
3300pF
p139
3900pF
p139
4700pF
p139
5600pF
p139
6800pF
p139
8200pF
p139
10000pF
p139
12000pF
p139
15000pF
p139
18000pF
p139
22000pF
p139
27000pF
p139
33000pF
p139
39000pF
p139
47000pF
p139
separate volume 6
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
c GRM Series High Dielectric Constant Type
p00
← Part Number List
L×W (mm)
T max. (mm)
JIS:
B
EIA: X7R
X7S
X7T
X7U
0.4×0.2
0.6×0.3
0.22
0.33
10
Rated Voltage (Vdc)
R
6.3
4
Cap. / TC Code X7R X5R, B X5R, B X5R
50
X7R
25
B
16
p64 p64 p64
100pF
p64 p64 p64
p65
p65 p65 p65 p65 p65
150pF
p64 p64 p64
p65
p65 p65 p65 p65 p65
220pF
p64 p64 p64
p65
p65 p65 p65 p65 p65
330pF
p64 p64 p64
p65
p65 p65 p65 p65 p65
470pF
p64 p64 p64
p65
p65 p65 p65 p65 p65
680pF
p64 p64 p64 p64
p65
p65 p65 p65 p65 p65
1000pF
p64 p64 p64 p64
p65
p65 p65 p65 p65 p65
1500pF
p64 p64 p64 p64
p65
p65 p65 p65 p65
2200pF
p64 p64 p64 p64
p65
p65 p65 p65 p65
3300pF
p64 p64 p64 p64
p65
p65 p65 p65 p65
4700pF
p64 p64 p64 p64
6800pF
p64 p64 p64 p64
10000pF
p64 p64 p64 p64
X5S
1.0×0.5
0.22
10
6.3
4
10
6.3
2.5
4
X6Δ
X7T
p66 p66 p66 p67 p67 p67
p67
p67
p66 p66 p66 p67 p67 p67 p67
p67
p67
p66
p65 p65 p66 p66 p66 p66
p65 p65
p66
p65 p65 p65 p65 p66 p66 p66 p66
p66 p66
p66 p66
p64
p66 p66
p64
18000pF
p66 p66 p66
p66 p66
p64
p66 p66
p64
27000pF
33000pF
X5R
p65 p65 p65 p66 p66 p66
12000pF
22000pF
X6T
X7R, R X5R, B X7R, R X5R, B X7R, R X5R, B X7R, R X6S X5R, B X6S X5R, B X6S X5R, B X7T
68pF
15000pF
X6S
p66 p66 p66
p66 p66
p64
p66 p66
p64
39000pF
p66 p66 p66
p66 p66
47000pF
p64
p64
68000pF
p64
p64
0.1μF
p64
p64
p65 p65
p66 p66
p66 p66 p66
p66 p66
p66
p66 p66
p66
p66
p66
0.15μF
0.22μF
p66
0.33μF
0.47μF
0.68μF
1.0μF
2.2μF
4.7μF
10μF
22μF
47μF
100μF
150μF
separate volume 7
p67 p67
p67
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ c GRM Series High Dielectric Constant Type)
p00
← Part Number List
R
JIS:
B
EIA: X7R
X7S
X7T
X6S
X6T
X5R
X5S
1.0×0.5
L×W (mm)
0.33
0.3
T max. (mm)
Rated Voltage (Vdc)
X7U
50
Cap. / TC Code X7R, R
25
B
X7R
10
16
B
X7R
B
10
6.3
X5R X5R, B X6T X5R, B X6T
0.55
4
100
50
25
16
10
X5R X7R X7Δ, R X6S X5R, B X7R, R X6S X5R, B X7R, R X5R, B X7R, R
68pF
100pF
150pF
220pF p67 p67 p67
p67 p67 p68
p68
330pF p67 p67 p67
p67 p67 p68
p68
470pF p67 p67 p67
p67 p67 p68
p68
680pF p67 p67 p67
p67 p67 p68
p68
1000pF p67 p67 p67
p67 p67 p68
p68 p68
1500pF p67 p67 p67
2200pF
p67
p67
p67 p67 p68
p68
p67 p67 p68
p68 p68
3300pF
p67
p67
p67 p67 p68
p68
4700pF
p67
p67
p67 p67 p68
p68 p68
6800pF
p67
p67
p67 p68
p68 p68 p68
p68
10000pF
p67
p67
p67 p68
p68 p68 p68
p68
p67
p67
p68 p68 p68
p68
p67
p67
p68 p68 p68
p68
p67
p67
p68 p68 p68
p68 p68 p68 p68 p69
47000pF
p68
p68 p68 p68
p68 p68 p68 p68 p69
68000pF
p68
p68
0.1μF
p68
p68 p68 p68 p68
p68
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
p68 p68 p68 p68 p68 p68 p69 p69 p69
p68 p68 p68
0.15μF
p68
0.22μF
p68
0.33μF
0.47μF
0.68μF
1.0μF
p67 p67 p67 p67 p67 p67
p67
p68 p68
p69 p69
2.2μF
4.7μF
10μF
22μF
47μF
100μF
150μF
separate volume 8
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ c GRM Series High Dielectric Constant Type)
p00
← Part Number List
R
JIS:
B
EIA: X7R
X7S
X7T
X7U
X6S
X6T
X5R
X5S
1.0×0.5
L×W (mm)
10
Rated Voltage (Vdc)
6.3
Cap. / TC Code X6S X5R, B X7R
1.6×0.8
0.55,
0.6 0.6, 0.7
0.55
T max. (mm)
4
X6S X7R
6.3
4
0.6
2.5
X6Δ X5R, B X5R, B X6T
0.7
2.5
0.5
25
0.9,
0.95, 1
0.9
16
250
100
50
25
16
6.3
X5R X5R, B X5R, B X7R X7R X7R, R X5R, B X7R, R X6S X7Δ, R X6S
2.5
25
X6S X5R, B
68pF
100pF
150pF
220pF
p143
p69 p70 p70 p70
330pF
p143
p69 p70 p70 p70
470pF
p143
p69 p70 p70 p70
680pF
p143
p70 p70 p70 p70
1000pF
p143
p70 p70 p70 p70 p70
1500pF
p143
p70 p70 p70 p70
2200pF
p143
p70 p70 p70 p70 p70
p71
3300pF
p70 p70 p70 p70
p71
4700pF
p70 p70 p70 p70 p70
p71
6800pF
p70 p70 p70 p70
p71
10000pF
p70 p70 p70 p70 p70
p71
p70 p70 p70 p70 p70 p71
p71
p70 p70 p70 p70 p70 p70 p71
p71
p70 p70 p70 p70 p71
p71
47000pF
p70 p70 p70 p70 p71
p71
68000pF
p70 p70 p70 p70 p71
0.9
0.9
0.9
0.9
0.9
12000pF
15000pF
0.9
18000pF
22000pF
0.9
27000pF
33000pF
0.9
39000pF
0.1μF
0.9
p71
0.9 0.9
p70 p70 p70 p70
0.15μF
p69 p69
p69
0.55
p69 0.55
p69 p69
0.22μF
p69 p69
p69
0.55
p69 0.55
p69 p69
0.33μF
p69 p69
p69
0.55
p69 0.55
p69 p69
0.47μF
p69 p69
p69
0.55
p69 0.55
p69 p69
0.68μF
1.0μF
0.9
2.2μF
4.7μF
10μF
22μF
47μF
100μF
150μF
separate volume 9
p69 p69
p71 p71
p71 p71
p70
p69
p69
p71
0.9 0.9
p71 p71
p70 p70 p70 p71
p70
p69 p69
p69
0.9
p71 p71
0.55 0.55
p69 p69
p69
p71 p71
p70 p70 p71
p69 p69 p69 p69
0.55
p69 0.55
p69 p69
p70 p70 p70
p71
0.9 0.9
p71 p71
p71 p71
p71
p71 p71
p71
p71 p71
0.9 0.9
0.9 0.9
0.9 0.9
p71
0.6 0.6 0.6 0.6
p69 p69 p69 p69 p69
0.7
p69
p71 p71
0.95, 1
p72
p69
p72
p72
1
p72
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ c GRM Series High Dielectric Constant Type)
p00
← Part Number List
R
JIS:
B
16
X7S
X7T
X7U
X6S
X6T
X5R
X5S
2.0×1.25
1.6×0.8
L×W (mm)
0.9,
T max. (mm) 0.95,
1
Rated Voltage (Vdc)
EIA: X7R
0.9, 1
16
Cap. / TC Code X5R, B X6S
10
X7Δ
6.3
X6S
4
0.9,
0.95
1
10
35
0.7
25
0.95
16
100
50
35
25
X7Δ X5R, B X6S X5R, B X5R, B X5R X5R X6S X7R X5R, B X6S X5R X7R
R
16
X6S X5R
B
X7R
68pF
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
p72
10000pF
p72
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
p72
39000pF
47000pF
68000pF
p72
0.1μF
p72
0.15μF
0.9
p71
0.9 0.9
0.22μF
p71 p71
0.33μF
0.9
0.9
0.9 0.9
p71
p71
p71 p71
p72
p71
0.9
0.9 0.9
0.68μF p71
p71
0.9 0.9
p71
p71 p71
0.9 0.9
0.9
0.9
p71 p71
p71
p71
0.9 0.9 0.9 0.9 0.9 0.9
2.2μF p71
p71 p71 p71 p71 p71
4.7μF
10μF
22μF
p72
p72
0.9
0.47μF
1.0μF
p72
p72
0.9
0.9 0.9
p71
p72
p72
p72 p72
1
1
1
1
1
0.9 0.9
0.9
0.9 0.9 0.95
p72
p72
p72
p72
p72
p72 p72
p72
p72 p72
1
1
p72 p72
1
p72
1
p72
p72 p72
p72
p72
p72
p72
p72
p72 p72 p72
p71 p71
0.9
0.95 0.95
p72
p72
p72
p72
p72
p72
p72
p72
p72
1
p72 p72
47μF
100μF
150μF
separate volume 10
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ c GRM Series High Dielectric Constant Type)
p00
← Part Number List
JIS:
R
B
EIA: X7R
X7S
X7T
X6S
X6T
X5R
X5S
2.0×1.25
L×W (mm)
0.95, 1
0.95
T max. (mm)
10
16
Rated Voltage (Vdc)
Cap. / TC Code
X7U
R
X6S X5R
B
X7Δ
X5R
6.3
B
X6S X5R
4
B
50
1
250
1.35
100
50
100
25
16
X6S X5R X7R, R X7R X7R X7R X7R, R X5R, B X7R, R X6S X5R, B X7R
68pF
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
p143
1500pF
p143
2200pF
p143
3300pF
p143
4700pF
p143
6800pF
p143
0.95
10000pF
p73
p72
12000pF
0.95
15000pF
p73
p72
18000pF
1
22000pF
p73
p73
27000pF
0.95 0.95
33000pF
p73
p72 p72
39000pF
47000pF
p73 p73 p73 p73
68000pF
p73 p73 p73 p73
0.1μF
p73 p73 p73 p73 p73 p73
0.15μF
0.22μF
p73
0.95
0.33μF
p72
0.47μF
0.68μF
p72
22μF
47μF
100μF
150μF
separate volume 11
p73
p73
p73
p73
p73
p73
p73
p73
p73 p73 p73
2.2μF
10μF
p73 p73 p73
p73
p73
p72
1.0μF
4.7μF
p73
p73 p73 p73
p72
p72
p72
p72
p72
p72
p73 p73 p73
p72
p72
p72
p72
p73
p72
p72
p73
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ c GRM Series High Dielectric Constant Type)
p00
← Part Number List
JIS:
R
B
EIA: X7R
X7S
X7T
X6S
X6T
X5R
X5S
2.0×1.25
L×W (mm)
1.4
1.35
T max. (mm)
Rated Voltage (Vdc)
X7U
16
10
Cap. / TC Code X6S X5R, B X6S
6.3
100
50
25
16
1.45
10
X6S X7R X5R, B X7R, R X5R, B X7R X6S X7R
6.3
B
4
250
25
6.3
4
X7R X6S X5R, B X7U X6S X7R X5R X5R, B X6S X5R, B
68pF
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
p143
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
39000pF
47000pF
68000pF
0.1μF
0.15μF
0.22μF
0.33μF
0.47μF
p73
0.68μF
1.0μF
p73 p73 p73
2.2μF
p73 p73
4.7μF
p73 p73 p73
10μF
22μF
47μF
p73 p73 p73
p73 p73 p73
p73 p73
p73
p73
p73 p73
p73
p73
p73
p73
p73
p73 p73 p73 p74
p74
p74
p74 p74 p74 p74 p74
100μF
150μF
separate volume 12
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ c GRM Series High Dielectric Constant Type)
p00
← Part Number List
JIS:
R
B
EIA: X7R
X7S
X7T
X6S
X6T
X5R
X5S
3.2×1.6
L×W (mm)
0.95
0.7
T max. (mm)
Rated Voltage (Vdc)
X7U
25
16
Cap. / TC Code X5R, B X6S
100
50
35
25
X7R X7R X5R X7R, R
1.25
16
B
10
6.3
1000 630
1.25, 1.3
50
250
X6S X5R, B X5R, B X6S X5R, B X7R X7R X7R X7R, R
16
B
X6S
100
B
25
1.8
630
X7R X5R, B X7R
68pF
100pF
150pF
220pF
330pF
470pF
p144
680pF
p144
1000pF
p144 p144
1500pF
p144 p144
2200pF
p144 p144
3300pF
p144 p144
4700pF
p144 p144
6800pF
p144
10000pF
p144
12000pF
15000pF
p143
p74
p144
18000pF
22000pF
1.25
p143
p74
27000pF
1.25
33000pF
p74
39000pF
1.25
47000pF
p74
68000pF
0.1μF
1.25
p143
p74
p74
0.15μF
p74 p74 p74
1.25
0.22μF
p74 p74 p74
1.25
1.25
p74
p74
0.33μF
p74
p74
p74 p74 p74
0.47μF
p74
0.68μF
1.3
p74
p74
p74
p74
p74
1.0μF
p74
p74
1.3
2.2μF p74 p74 p74
p74
4.7μF
10μF
22μF
47μF
100μF
150μF
separate volume 13
1.3
p74
p74
p74
p74
p74 p74
p74 p74 p74 p74 p74
1.25
p74
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ c GRM Series High Dielectric Constant Type)
p00
← Part Number List
JIS:
R
B
EIA: X7R
X7S
X7U
X6S
X6T
X5R
X5S
3.2×2.5
3.2×1.6
L×W (mm)
1.8
T max. (mm)
Rated Voltage (Vdc) 250
Cap. / TC Code X7R
X7T
50
25
1.9
1.8, 1.9
16
10
6.3
100
X7R X5R, B X7R X6S X5R, B X7R, R X6S X5R, B X7R X6S X5R, B X7Δ
X7R
6.3
4
4
X6Δ X5R, B X7U
X6Δ
1
6.3
X5R X5S
4
X6T
X5S
p75
p75
68pF
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF p143
39000pF
47000pF p143
68000pF
0.1μF p143
0.15μF
0.22μF
0.33μF
0.47μF
0.68μF
1.8
1.0μF
p74
2.2μF
p74 p74 p74
4.7μF
p74
10μF
22μF
47μF
100μF
150μF
p74
1.9
p74
p74 p74
p74
p74
p74 p74 p74 p74
p74 p74
p74 p74
p74 p74 p74 p74
1.8
p74 p74 p74 p74
p74
p74 p74 p74
1.8
1.8 1.8
1.8
1.8
p74
p74 p74
p74
p74
1.9
1.9
1.9
1.9
p74
p74
p74
p74
p74
p75
separate volume 14
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ c GRM Series High Dielectric Constant Type)
p00
← Part Number List
JIS:
R
B
EIA: X7R
X7S
X7T
Rated Voltage (Vdc)
X6S
X6T
X5R
X5S
3.2×2.5
L×W (mm)
T max. (mm)
X7U
1
2.5
Cap. / TC Code X6T
1.5
1000 630
250
X7R X7R X7R
1.8
50
X7R
10
B
2.2
2
100 1000 630
25
250
2.7
100
50
35
25
16
X6S X7R X7R X7R X7R X7R X6S X7R X7R X5R, B X7R X5R, B X7R X6S X5R, B X7R
68pF
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
p144
10000pF
p144
12000pF
15000pF
p144
18000pF
22000pF
p144
p144
27000pF
33000pF
p144
39000pF
47000pF
p144
68000pF
p143
0.1μF
p143
0.15μF
p143
0.22μF
p143
0.33μF
0.47μF
0.68μF
p75
p75
p75
1.0μF
p75
2.2μF
p75
4.7μF
p75
10μF
p75
22μF
p75
47μF
100μF
150μF
p75
separate volume 15
p75
p75
p75 p75 p75 p75 p75 p75
p75
p75 p75 p75 p75
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
(→ c GRM Series High Dielectric Constant Type)
p00
← Part Number List
JIS:
R
B
X7S
X7T
X7U
X6S
1.5
2.7
6.3
10
16
Cap. / TC Code X6S X5R, B X7R
X6S X5R, B X7Δ
X6T
X5R
X5S
4.5×3.2
3.2×2.5
L×W (mm)
T max. (mm)
Rated Voltage (Vdc)
EIA: X7R
4
630
5.7×5.0
2
250 1000 630
2
250 1000 630
250
X6S X5R, B X7U X6S X7R X7R X7R X7R X7R X7R X7R X7R
68pF
100pF
150pF
220pF
330pF
470pF
680pF
1000pF
1500pF
2200pF
3300pF
4700pF
6800pF
10000pF
12000pF
15000pF
18000pF
22000pF
27000pF
33000pF
p144
39000pF
47000pF
p144
68000pF
p144
p144
0.1μF
p144
p144
0.15μF
p144
p143
0.22μF
p144
0.33μF
p144
p144
0.47μF
p144
p144
p144
0.68μF
p144
1.0μF
p144
2.2μF
4.7μF
10μF
22μF
p75
47μF
p75 p75 p75 p75
100μF
p75 p75 p75 p75
p75
p75
p75 p75 p75 p75
p75
150μF
separate volume 16
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
c GNM Series High Dielectric Constant Type
p00
← Part Number List
R
JIS:
B
EIA: X7R
X5R
2
Number of Elements
0.9×0.6
L×W (mm)
1.37×1.0
0.5
T max. (mm)
16
Rated Voltage (Vdc)
Cap. / TC Code X5R
0.55
10
B
4
X5R
B
X5R
0.7
16
B
X7R
R
10
X5R
B
50
X5R
B
25
X7R
R
X5R
B
p77
p77
p77
p77
16
X7R
R
X5R
B
2200pF
p77
p77
p77
p77
4700pF
p77
p77
p77
p77
p77
p77
p77
p77
X7R
R
470pF
1000pF
10000pF
p77
p77
p77
p77
22000pF
p77
p77
p77
p77
p77
p77
47000pF
p77
p77
p77
p77
p77
p77
0.1μF
p77
p77
p77
p77
p77
p77
p77
p77
p77
0.22μF
0.47μF
1.0μF
p77
p77
p77
p77
p77
2.2μF
2
4
1.37×1.0
2.0×1.25
Number of Elements
L×W (mm)
0.7
T max. (mm)
0.8
16
Rated Voltage (Vdc)
Cap. / TC Code X5R
10
B
X7R
R
16
X5R
B
X5R
0.55
10
B
6.3
X5R
B
X5R
16
B
X7R
R
0.7
10
B
X5R
6.3
B
X5R
50
B
470pF
p77
1000pF
p77
2200pF
4700pF
10000pF
22000pF
p77
p77
p77
p77
p77
p77
47000pF
p77
p77
p77
p77
p77
p77
p77
p77
0.1μF
p77
0.22μF
p77
p77
p77
0.47μF
p77
p77
2.2μF
p77
p77
p77
p77
4
Number of Elements
2.0×1.25
L×W (mm)
T max. (mm)
0.7
Rated Voltage (Vdc)
25
Cap. / TC Code X7R
0.95
16
R
B
10
X7R
R
B
22000pF
p78
p78
p78
47000pF
p78
p78
p78
0.1μF
p78
p78
p78
6.3
X5R
B
X5R
B
p78
p78
p78
p78
470pF
1000pF
2200pF
p77
p77
p77
4700pF
p77
p77
p77
10000pF
p77
p77
p78
0.22μF
0.47μF
1.0μF
2.2μF
p77
p77
p77
p77
p77
p77
p77
p77
p77
p77
p77
1.0μF
4
X7R
p77
p77
R
B
p77
p77
p77
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Capacitance Table
Each number in the Part Number List refers to the page number printed at the bottom of the page.
c LLL Series High Dielectric Constant Type
p00
← Part Number List
L×W (mm)
T max. (mm)
Rated Voltage (Vdc)
EIA: X7R
X7S
X6S
0.5×1.0
0.8×1.6
0.35
6.3
Cap. / TC Code X6S
X5R
0.5
4
25
16
1.25×2.0
0.55
10
4
X7S X7R X7R X7R X7S
4
0.6
50
25
16
0.5
10
4
50
25
16
0.7
10
6.3
4
50
25
0.95
10
16
X7S X7R X7R X7R X7R X7S X7R X7R X7R X7R X7R X7S X7R X7R X7R X7R
2200pF
p80
4700pF
p80
10000pF
22000pF
p80
47000pF
p80
0.1μF
p80
0.22μF
p80
p80
p80
p80
p80
p80
p80
p80
p80
p80
p80
p80
p80
p80
0.47μF
p80
p80
p80
1.0μF
p80
2.2μF
p80
p80
p80
p80
p80
p80
p80
p80
4.7μF
10μF
L×W (mm)
T max. (mm)
Rated Voltage (Vdc)
1.25×2.0
1.6×3.2
0.95
10
Cap. / TC Code X7R
0.5
4
50
25
0.8
16
10
50
25
16
1.25
10
6.3
50
25
16
10
6.3
X7S X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X5R
2200pF
4700pF
10000pF
p80
p80
22000pF
p80
p80
47000pF
p80
0.1μF
p80
0.22μF
p80
0.47μF
p80
1.0μF
p80
2.2μF
p80
p80
p80
p80
p80
p80
p80
p80
p80
p80
p80
p80
4.7μF
p80
p80
10μF
p80
c LLR Series High Dielectric Constant Type
p00
← Part Number List
EIA: X7S
0.8×1.6
L×W (mm)
0.55
T max. (mm)
4
Rated Voltage (Vdc)
X7S
TC Code
Cap. / ESR (mΩ) 100
1.0μF
p80
220
470 1000
p80
p80
p80
5
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
c LLA Series High Dielectric Constant Type
p00
← Part Number List
EIA: X7R
X7S
L×W (mm) 1.6×
0.8
2.0×1.25
T max. (mm) 0.55
Rated Voltage (Vdc)
4
Cap. / TC Code X7S
25
16
10
0.95
6.3
4
25
10000pF
p81
10
6.3
4
22000pF
p81
p81
0.22μF
p81
0.47μF
p81
1.0μF
p81
p81
2.2μF
p81
p81
p81
p81
p81
EIA: X7R
p81
22000pF
p81
16
6.3
3.2×1.6
0.55
4
16
10
6.3
X7R X7R X7S X7R X7R X7R
47000pF
p81
0.1μF
p81
p81
0.22μF
p81
0.47μF
p81
p81
p81
1.0μF
p81
2.2μF
p81
p81
p81
X7S
0.55
10000pF
1.25
16
10
p81
p81
p81
p81
p81
2.0×1.25
Cap. / TC Code X7R
10
p81
p81
p81
← Part Number List
25
16
p81
p81
c LLM Series High Dielectric Constant Type
Rated Voltage (Vdc)
0.95
6.3
p81
0.1μF
L×W (mm)
10
p81
p81
T max. (mm)
16
p81
4.7μF
6
16
0.55
X7R X7R X7R X7R X7S X7R X7R X7R X7R X7S X7R X7R X7R X7R X7R X7R X7R
47000pF
p00
3.2×1.6
0.55
p81
p81
p81
p81
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
C02E.pdf
Oct.1,2012
Capacitance Table
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
c GJM Series Temperature Compensating Type
p00
← Part Number List
L×W (mm)
T max. (mm)
CK
JIS:
CJ
0.4×0.2
0.6×0.3
0.22
0.33
16
Rated Voltage (Vdc)
Cap. / TC Code C0G
25
CΔ
C0Δ
CH
EIA: C0G
1.0×0.5
0.55
6.3
CΔ
C0H
C0G
50
CH
0.1pF
C0G
CΔ
p96
p99
0.2pF
p83
p86
p89
p92
p96
p99
1.0pF
p83
p86
p89
p92
p96
p99
2.0pF
p83
p86
p89
p92
p96
p99
3.0pF
p83
p86
p90
p93
p96
p100
4.0pF
p84
p87
p90
p93
p97
p100
p93
p97
p100
5.0pF
p84
p87
p90
6.0pF
p84
p87
p90
p94
p97
p101
7.0pF
p85
p88
p91
p94
p98
p101
8.0pF
p85
p88
p91
p94
p98
p101
9.0pF
p85
p88
p92
p95
p98
p102
10pF
p86
p89
p92
p95
p99
p102
11pF
p92
p95
p99
p102
12pF
p92
p95
p99
p102
13pF
p92
p95
p99
p102
15pF
p92
p95
p99
p102
16pF
p92
p95
p99
p102
18pF
p92
p95
p99
p102
20pF
p92
p95
p99
p102
22pF
p95
p95
p99
p102
24pF
p95
p95
p99
p102
27pF
p95
p95
p99
p102
p102
30pF
p95
p95
p99
33pF
p95
p95
p99
p102
36pF
p99
p102
39pF
p99
p102
43pF
p99
p103
47pF
p99
p103
The indication for every 0.1 pF has
been omitted for less than 10 pF.
Refer to the Part Number List for
details.
7
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
c GQM Series Temperature Compensating Type
p00
← Part Number List
CJ
CH
EIA: C0G
1.6×0.8
L×W (mm)
T max. (mm)
CK
JIS:
0.8
Rated Voltage (Vdc) 250
0.9
100
Cap. / TC Code C0G C0G
CΔ
2.8×
2.8
2.0×1.25
0.95
50
C0G
100
CH
C0G
CΔ
50
C0G
CH
1
1.35
250
500
C0G C0G
0.1pF p105
0.5pF p105 p105 p106
p108 p108
p110 p111
1.0pF p105 p106 p106
p108 p108
p110 p111
2.0pF p105 p106 p106
p108 p109
p110 p111
3.0pF p105 p106 p106
p108 p109
p110 p111
4.0pF p105 p106 p106
p108 p109
p110 p111
5.0pF p105 p106 p106
p108 p109
p110 p111
p108 p109
p110 p111
7.0pF p105
p106 p107 p108 p109
p110 p111
8.0pF p105
p106 p107 p108 p109
p110 p111
9.0pF p105
p107 p107 p108 p109
p110 p111
10pF p105
p107 p107 p108 p109
p110 p111
11pF p105
p107 p107 p108 p109
p110 p111
12pF p105
p107 p107 p108 p109
p110 p111
13pF p105
p107 p107 p108 p109
p110 p112
15pF p105
p107 p107 p108 p109
p110 p112
16pF p105
p107 p107 p108 p109
p110 p112
18pF p105
p107 p107 p108 p109
p110 p112
20pF p105
p107 p107
p109 p109 p110 p112
22pF p105
p107 p107
p109 p109 p110 p112
24pF p105
p107 p107
p109 p109 p111 p112
27pF p105
p107 p107
p109 p109 p111 p112
30pF p105
p107 p107
p109 p109 p111 p112
33pF p105
p107 p107
p109 p110 p111 p112
36pF p105
p107 p107
p109 p110 p111 p112
39pF p105
p107 p107
p109 p110 p111 p112
43pF p105
p107 p107
p109 p110 p111 p112
47pF p105
p107 p107
p109 p110 p111 p112
51pF
p107 p107
p109 p110 p111 p112
56pF
p107 p107
p109 p110 p111 p112
62pF
p107 p107
p109 p110 p111 p112
68pF
p107 p108
p109 p110 p111 p112
75pF
p107 p108
p109 p110 p111 p112
82pF
p107 p108
p109 p110 p111 p112
91pF
p107 p108
p109 p110 p111 p112
100pF
p107 p108
p109 p110 p111 p112
6.0pF p105 p106 p106
8
The indication for every 0.1 pF has
been omitted for less than 10 pF.
Refer to the Part Number List for
details.
C02E.pdf
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Capacitance Table
Each number in the Part Number List refers to the page number printed at the bottom of the page.
c GMA Series High Dielectric Constant Type
p00
← Part Number List
JIS:
R
B
L×W (mm) 0.38×0.38
T max. (mm)
Rated Voltage (Vdc)
X5R
0.5×0.5
0.35
0.8×0.8
0.4
10
Cap. / TC Code X7R
EIA: X7R
100
R
25
X7R X7R
100pF
p114
150pF
p114
220pF
p114
330pF
p114
470pF
p114
680pF
p114
1000pF
p114
0.6
10
B
X7R
R
6.3
B
X5R
100
B
X7R X7R
1500pF
p114 p114
p114
2200pF
p114 p114
p114
3300pF
p114 p114
p114
4700pF
p114 p114
6800pF
25
10
B
X7R
R
6.3
B
p114
p114 p114 p114
p114 p114
15000pF
p114 p114 p114
p114 p114
22000pF
p114 p114 p114
p114 p114
33000pF
p114 p114 p114
47000pF
p114 p114 p114
68000pF
0.47μF
B
p114
p114 p114 p114
10000pF p114 p114
0.1μF
X5R
p114 p114 p114
p114 p114
p114 p114 p114
p114 p114
9
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
c GMD Series High Dielectric Constant Type
p00
← Part Number List
JIS:
R
B
Cap. / TC Code X7R
X5R
0.6×0.3
L×W (mm)
1.0×0.5
0.33
T max. (mm)
Rated Voltage (Vdc)
EIA: X7R
25
R
0.55
16
B
X7R
R
10
B
X7R
R
6.3
B
X5R
50
B
X7R
R
25
B
X7R
R
16
B
X7R
R
10
B
X5R
B
100pF p116 p116 p116
120pF p116 p116 p116
150pF p116 p116 p116
180pF p116 p116 p116
220pF p116 p116 p116
p116 p116 p117
270pF p116 p116 p116
p116 p117 p117
330pF p116 p116 p116
p116 p117 p117
390pF p116 p116 p116
p116 p117 p117
470pF p116 p116 p116
p116 p117 p117
560pF p116 p116 p116
p116 p117 p117
680pF p116 p116 p116
p116 p117 p117
820pF p116 p116 p116
p116 p117 p117
1000pF p116 p116 p116
p116 p117 p117
1200pF p116 p116 p116
p116 p117 p117
p116 p117 p117
1500pF p116 p116 p116
10
1800pF
p116 p116 p116
p116 p117 p117
2200pF
p116 p116 p116
p116 p117 p117
2700pF
p116 p116 p116
p116 p117 p117
3300pF
p116 p116 p116
p116 p117 p117
3900pF
p116 p116 p116
p116 p117 p117
4700pF
p116 p116 p116
p116 p117 p117
5600pF
p116 p116 p116
p117 p117 p117
6800pF
p116 p116 p116
p117 p117 p117
8200pF
p116 p116 p116
p117 p117 p117
10000pF
p116 p116 p116
p117 p117 p117
12000pF
p117 p117 p117
15000pF
p117 p117 p117
18000pF
p117 p117 p117
22000pF
p117 p117 p117
27000pF
p117 p117 p117
33000pF
p117 p117 p117
39000pF
p117 p117 p117
47000pF
p117 p117 p117
56000pF
p116 p116
p117 p117 p117
68000pF
p116 p116
p117 p117 p117
82000pF
p116 p116
p117 p117 p117
0.1μF
p116 p116
p117 p117 p117
0.12μF
p117 p117
0.15μF
p117 p117
0.18μF
p117 p117
0.22μF
p117 p117
0.27μF
p117 p117
0.33μF
p117 p117
0.39μF
p117 p117
0.47μF
p117 p117
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Capacitance Table
Each number in the Part Number List refers to the page number printed at the bottom of the page.
c GRJ Series High Dielectric Constant Type
p00
← Part Number List
L×W (mm)
T max. (mm)
EIA: X7R
2.0×1.25
1
Rated Voltage (Vdc) 250
Cap. / TC Code X7R
3.2×1.6
1.45
3.2×2.5
1.25
1.8
1.5
250 1000 630
250 1000 630
250 1000 630
4.5×3.2
2
250 1000 630
1.5
250
630
5.7×5.0
2
2
250 1000 630
250 1000 630
250
X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R
470pF
p149
680pF
p149
1000pF p148
p149 p149
1500pF p148
p149 p149
2200pF p148
p149 p149
3300pF p148
p149 p149
4700pF p148
p149 p149
6800pF p148
p149
p149
p149
p149
p149
10000pF
p148
15000pF
p148
p148
p149
22000pF
p148
p148
p149
p149
33000pF
p149
p149
p149
p149
p148
47000pF
p149
p148
68000pF
p149
p149
0.1μF
p149
p149
p148
p148
p148
p148
0.15μF
p149
p149
p149
p148
p148
0.22μF
p148
p149
p148
0.33μF
p148
p148
0.47μF
p148
p148
0.68μF
p148
1.0μF
p148
c GR3 Series High Dielectric Constant Type
p00
← Part Number List
EIA: X7T
L×W (mm) 2.0×1.25
T max. (mm)
1
1.45
3.2×1.6
1
3.2×2.5
1.25
1.8
1.5
4.5×3.2
2
1.5
5.7×5.0
2
2
2.7
Rated Voltage (Vdc) 250 250 450 250 630 450 250 630 450 250 630 250 630 450 250 250 630 450 250 630 450 250 630 450 250
Cap. / TC Code X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T X7T
10000pF p153
p153
15000pF p153
p153
22000pF
33000pF
47000pF
68000pF
0.1μF
0.15μF
0.22μF
p154
p154
p153
p153
p153
p154
p153
p154
p153
p153
p154
p153
p154
p153
p153
p154
p153
p153
p154
p153
p153
p153
p154
0.27μF
0.33μF
0.47μF
p154
p153
p153
p153 p153
0.56μF
0.68μF
1.0μF
p153
p153
p153
11
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Each number in the Part Number List refers to the page number printed at the bottom of the page.
c GRM/DC3.15kV Series High Dielectric Constant Type
p00
← Part Number List
EIA: C0G
c GR7 Series
p00
L×W (mm) 4.5×
2.0
T max. (mm)
Oct.1,2012
← Part Number List
L×W (mm)
1
T max. (mm)
Rated Voltage (Vdc) 3150
2.0×1.25
1
Cap. / TC Code
3.2×1.6
1.45
1
1.25
1.8
350
350
350
350
-
-
-
Rated Voltage (Vdc) 350
Cap. / TC Code C0G
Murata Temperature Characteristic:
-
-
5.0pF p158
10000pF p165
10pF p158
15000pF p165
12pF p158
22000pF
p165 p165 p165
15pF p158
27000pF
p165 p165
18pF p158
33000pF
22pF p158
47000pF
p165
p165
p165 p165
p165
27pF p158
33pF p158
39pF p158
c GA2 Series High Dielectric Constant Type
47pF p158
p00
← Part Number List
L×W (mm) 4.5×
2.0
c GR4 Series High Dielectric Constant Type
p00
← Part Number List
L×W (mm) 4.5×
2.0
T max. (mm)
1.5
EIA: X7R
4.5×3.2
1.5
2
5.7×
5.0
2
Rated Voltage (Vdc) 2000 2000 2000 2000
Cap. / TC Code X7R
X7R X7R X7R
4.5×3.2
1.5
1.5
2
2
250
250
250
T max. (mm)
Cap. / TC Code X7R
X7R X7R X7R
470pF p169
1000pF p169
2200pF
p169
3300pF
p169
4700pF
120pF p161
10000pF
p169
150pF p161
22000pF
p169
180pF p161
47000pF
220pF p161
0.1μF
330pF p161
390pF p161
470pF p161
560pF p161
680pF p161
820pF p161
1000pF p161
1200pF p161
1500pF p161
1800pF
p161
2200pF
p161
2700pF
p161
3300pF
p161
3900pF
p161
4700pF
10000pF
p161
p161
5.7×
5.0
Rated Voltage (Vac(r.m.s.)) 250
100pF p161
270pF p161
12
EIA: X7R
p169
p169
p169
-
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Capacitance Table
Each number in the Part Number List refers to the page number printed at the bottom of the page.
c GA3 Series
UL, IEC60384-14 Class X1/Y2 Type GC
High Dielectric Constant Type
p00
← Part Number List
c GA3 Series
IEC60384-14 Class Y3 Type GD
p00
EIA: X7R
← Part Number List
1
SL
EIA: X7R
4.5×3.2
1.5
2.2
1.5
2
Rated Voltage (Vac(r.m.s.)) 250
250
250
250
250
SL
X7R
SL
X7R X7R
T max. (mm)
2.3
JIS:
4.5×2.0
L×W (mm)
L×W (mm) 5.7×
5.0
T max. (mm)
Oct.1,2012
Rated Voltage (Vac(r.m.s.)) 250
Cap. / TC Code
Cap. / TC Code X7R
10pF
p176
100pF p173
12pF
p176
150pF p173
15pF
p176
220pF p173
18pF
p176
330pF p173
22pF
p176
27pF p176
33pF p176
39pF p176
c GA3 Series
IEC60384-14 Class Y2, X1/Y2 Type GF
p00
56pF p176
← Part Number List
SL
JIS:
1
1.5
EIA: X7R
5.7×
2.8
4.5×2.0
L×W (mm)
T max. (mm)
47pF p176
2.2
68pF p176
82pF p176
5.7×5.0
1.5
1.5
2
100pF
p176
250
250
Rated Voltage (Vac(r.m.s.)) 250
250
250
250
250
150pF
p176
SL
X7R
SL
X7R X7R X7R X7R
220pF
p176
Cap. / TC Code
10pF
p174
330pF
p176
12pF
p174
470pF
p176
15pF
p174
680pF
p176
18pF
p174
1000pF
p176
22pF
p174
1500pF
p176
27pF p174
1800pF
p176
33pF p174
2200pF
p176
39pF p174
4700pF
p176
47pF p174
56pF p174
68pF p174
c GA3 Series
IEC60384-14 Class X2 Type GB
High Dielectric Constant Type
82pF p174
100pF
p174
150pF
p174
220pF
p00
p174
330pF
p174
470pF
p174
680pF
p174
← Part Number List
5.7×5.0
L×W (mm)
p174
T max. (mm)
1.5
p174
Rated Voltage (Vac(r.m.s.)) 250
1000pF
p174 p174
Cap. / TC Code X7R
1500pF
p175
2
2.5
2.9
250
250
250
X7R X7R X7R
10000pF p177
1800pF
p175
15000pF p177
2200pF
p175
22000pF
3300pF
p175
4700pF
EIA: X7R
p175
p177
33000pF
p177
47000pF
p177
56000pF
p177
13
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitance Table
p00
Oct.1,2012
Each number in the Part Number List refers to the page number printed at the bottom of the page.
c KRM Series High Dielectric Constant Type
p00
← Part Number List
EIA: X7R
3.5×1.7
L×W (mm)
T max. (mm)
2
Rated Voltage (Vdc)
25
Cap. / TC Code X5R
1.0μF
2.9
100
50
25
X6S
X5R
3.6×
1.7
3.7×
1.7
2.9
2.9
50
100
6.1×5.3
3
100
63
3.9
50
25
p200 p200
p200
50
25
p200 p200
p200
47μF
p200
c KR3 Series High Dielectric Constant Type
← Part Number List
EIA: X7T
6.1×5.3
L×W (mm)
T max. (mm)
3
Rated Voltage (Vdc) 630
450
250
630
450
250
450
630
450
250
Cap. / TC Code X7T
3.9
5
6.7
X7T
X7T
X7T
X7T
X7T
X7T
X7T
X7T
X7T
0.1μF p204
0.15μF p204
p204
0.27μF
14
63
p200
p200
33μF
2.2μF
100
p200
p200
22μF
1.2μF
6.7
25
p200 p200 p200
15μF
1.0μF
100
p200
10μF p200
0.56μF
25
p200 p200
p200
6.8μF
0.47μF
5
50
p200
4.7μF
0.22μF
63
X7R X7R X6S X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R
2.2μF
p00
100
p204
p204
p204
p204 p204
p204
p204
p204 p204
p204
p204
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Oct.1,2012
o Part Numbering
Chip Monolithic Ceramic Capacitors
(Part Number)
GR
M
18
8
q
w
e
r t
B1 1H
y
102
K
u
i
A01 D
o
wSeries
Product ID
GR
GQ
GM
GN
LL
GJ
GA
GW
!0
rDimension (T) (Except GNM)
qProduct ID
Code
Dimension (T)
Code
Series
2
0.2mm
J
Soft Termination Type
3
0.3mm
M
Tin Plated Layer
4
0.4mm
3
Large Capacitance and
High Allowable Ripple Current
5
0.5mm
6
0.6mm
4
Only for Information Devices
7
0.7mm
7
Only for Camera Flash Circuit
8
0.8mm
M
High Frequency for
Flow/Reflow Soldering
9
0.85mm
A
1.0mm
A
Monolithic Microchip
B
1.25mm
D
For Bonding
C
1.6mm
M
Capacitor Array
D
2.0mm
2.5mm
L
Low ESL Type
E
R
Controlled ESR Low ESL Type
F
3.2mm
A
8-termination Low ESL Type
M
1.15mm
M
10-termination Low ESL Type
N
1.35mm
M
High Frequency Low Loss Type
Q
1.5mm
Low Distortion Type
R
1.8mm
8
Low Acoustic Type
S
2.8mm
2
For AC250V (r.m.s.)
X
Depends on individual standards.
3
Safety Standard Certified Type
M
For Decoupling
4
eDimensions (LgW)
Code
Dimensions (LgW)
EIA
02
0.4g0.2mm
01005
03
0.6g0.3mm
0201
05
0.5g0.5mm
0202
08
0.8g0.8mm
0303
0D
0.38g0.38mm
015015
0M
0.9g0.6mm
0302
15
1.0g0.5mm
0402
18
1.6g0.8mm
0603
1M
1.37g1.0mm
0504
1U
0.6g1.0mm
02404
21
2.0g1.25mm
0805
22
2.8g2.8mm
1111
31
3.2g1.6mm
1206
32
3.2g2.5mm
1210
42
4.5g2.0mm
1808
43
4.5g3.2mm
1812
52
5.7g2.8mm
2211
55
5.7g5.0mm
2220
rElements (GNM Only)
Code
Elements
2
2-elements
4
4-elements
Continued on the following page.
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
15
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Continued from the preceding page.
tTemperature Characteristics
Temperature
Characteristic Codes
Code
Public
STD Code
Temperature Characteristics
Reference Temperature Capacitance Change
or Temperature
Temperature
Range
Coefficient
Capacitance Change Each Temperature (%)
–55°C
–25°C
–10°C
Max.
Min.
Max.
Min.
Max.
Min.
0±60ppm/°C
–55 to 150°C
0.82
–0.45
0.49
–0.27
0.33
–0.18
20 to 125°C
0±30ppm/°C
–55 to 125°C
0.54
–0.23
0.33
–0.14
0.22
–0.09
20 to 85°C
+350 to –1000ppm/°C
–55 to 125°C
-
-
-
-
-
-
0C
CHA
*2
20°C
20 to 150°C
1C
CG
JIS
20°C
SL
JIS
20°C
1X
Operating
Temperature
Range
2C
CH
JIS
20°C
20 to 125°C
0±60ppm/°C
–55 to 125°C
0.82
–0.45
0.49
–0.27
0.33
–0.18
2P
PH
JIS
20°C
20 to 85°C
–150±60ppm/°C
–25 to 85°C
-
-
1.32
0.41
0.88
0.27
2R
RH
JIS
20°C
20 to 85°C
–220±60ppm/°C
–25 to 85°C
-
-
1.7
0.72
1.13
0.48
2S
SH
JIS
20°C
20 to 85°C
–330±60ppm/°C
–25 to 85°C
-
-
2.3
1.22
1.54
0.81
2T
TH
JIS
20°C
20 to 85°C
–470±60ppm/°C
–25 to 85°C
-
-
3.07
1.85
2.05
1.23
1.37
–0.9
3C
CJ
JIS
20°C
20 to 125°C
0±120ppm/°C
–55 to 125°C
0.82
–0.54
0.55
–0.36
3P
PJ
JIS
20°C
20 to 85°C
–150±120ppm/°C
–25 to 85°C
-
-
1.65
0.14
1.1
0.09
3R
RJ
JIS
20°C
20 to 85°C
–220±120ppm/°C
–25 to 85°C
-
-
2.03
0.45
1.35
0.3
3S
SJ
JIS
20°C
20 to 85°C
–330±120ppm/°C
–25 to 85°C
-
-
2.63
0.95
1.76
0.63
3T
TJ
JIS
20°C
20 to 85°C
–470±120ppm/°C
–25 to 85°C
-
-
3.4
1.58
2.27
1.05
–750±120ppm/°C
–25 to 85°C
-
-
4.94
2.84
3.29
1.89
–0.75
3U
UJ
JIS
20°C
20 to 85°C
4C
CK
JIS
20°C
20 to 125°C
0±250ppm/°C
–55 to 125°C
2.56
–1.88
1.54
–1.13
1.02
4P
PK
JIS
20°C
20 to 85°C
–150±250ppm/°C
–25 to 85°C
-
-
2.36
–0.45
1.57
–0.3
4R
RK
JIS
20°C
20 to 85°C
–220±250ppm/°C
–25 to 85°C
-
-
2.74
–0.14
1.83
–0.09
4S
SK
JIS
20°C
20 to 85°C
–330±250ppm/°C
–25 to 85°C
-
-
3.35
0.36
2.23
0.24
JIS
20°C
20 to 85°C
–470±250ppm/°C
–25 to 85°C
-
-
4.12
0.99
2.74
0.66
4T
TK
4U
UK
JIS
20°C
20 to 85°C
–750±250ppm/°C
–25 to 85°C
-
-
5.65
2.25
3.77
1.5
5C
C0G
EIA
25°C
25 to 125°C
0±30ppm/°C
–55 to 125°C
0.58
–0.24
0.4
–0.17
0.25
–0.11
5G
X8G
*2
25°C
25 to 150°C
0±30ppm/°C
–55 to 150°C
0.58
–0.24
0.4
–0.17
0.25
–0.11
6C
C0H
EIA
25°C
25 to 125°C
0±60ppm/°C
–55 to 125°C
0.87
–0.48
0.59
–0.33
0.38
–0.21
6P
P2H
EIA
25°C
25 to 85°C
–150±60ppm/°C
–55 to 125°C
2.33
0.72
1.61
0.5
1.02
0.32
1.28
6R
R2H
EIA
25°C
25 to 85°C
–220±60ppm/°C
–55 to 125°C
3.02
2.08
0.88
1.32
0.56
6S
S2H
EIA
25°C
25 to 85°C
–330±60ppm/°C
–55 to 125°C
4.09
2.16
2.81
1.49
1.79
0.95
6T
T2H
EIA
25°C
25 to 85°C
–470±60ppm/°C
–55 to 125°C
5.46
3.28
3.75
2.26
2.39
1.44
7U
U2J
EIA
25°C
25 to 125°C *5
–750±120ppm/°C
–55 to 125°C
8.78
5.04
6.04
3.47
3.84
2.21
B1
B *1
JIS
20°C
–25 to 85°C
±10%
–25 to 85°C
-
-
-
-
-
-
–25 to 85°C
±10%
–25 to 85°C
-
-
-
-
-
-
–25 to 85°C
±20%
-
-
-
-
-
-
85 to 125°C
+15%, –30%
-
-
-
-
-
-
B3
B
JIS
20°C
–25 to 125°C
C3
C
JIS
20°C
C6
X5S
EIA
25°C
–55 to 85°C
±22%
–55 to 85°C
-
-
-
-
-
-
C7
X7S
EIA
25°C
–55 to 125°C
±22%
–55 to 125°C
-
-
-
-
-
-
EIA
25°C
–55 to 105°C
±22%
–55 to 105°C
-
-
-
-
-
-
C8
X6S
D3
D
JIS
20°C
–25 to 125°C
+20%, –30%
–25 to 85°C
-
-
-
-
-
-
D6
X5T
EIA
25°C
–55 to 125°C
+22%, –33%
–55 to 125°C
-
-
-
-
-
-
D7
X7T
EIA
25°C
–55 to 125°C
+22%, –33%
–55 to 125°C
-
-
-
-
-
-
D8
X6T
EIA
25°C
–55 to 105°C
+22%, –33%
–55 to 105°C
-
-
-
-
-
-
E (1/2Ur) JIS
20°C
–25 to 85°C
+20%, –55%
–25 to 85°C
-
-
-
-
-
-
E1
E4
Z5U
EIA
25°C
10 to 85°C
+22%, –56%
10 to 85°C
-
-
-
-
-
-
E7
X7U
EIA
25°C
–55 to 125°C
+22%, –56%
–55 to 125°C
-
-
-
-
-
-
F1
F *1
JIS
20°C
–25 to 85°C
+30%, –80%
–25 to 85°C
-
-
-
-
-
-
F4
Z5V
EIA
25°C
10 to 85°C
+22%, –82%
–20 to 85°C
-
-
-
-
-
-
F5
Y5V
EIA
25°C
–30 to 85°C
+22%, –82%
–30 to 85°C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
J1
JA
*2
20°C
–25 to 105°C
–20% max.
–25 to 105°C
L8
X8L
*2
25°C
–55 to 150°C
+15%, –40%
–55 to 150°C
*1 Capacitance change is specified with 50% rated voltage applied.
*2 Murata Temperature Characteristic Code.
*5 Rated Voltage 100Vdc max: 25 to 85°C
Continued on the following page.
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
16
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Continued from the preceding page.
Temperature
Characteristic Codes
Public
STD Code
Code
Temperature Characteristics
Reference Temperature Capacitance Change
or Temperature
Temperature
Range
Coefficient
Operating
Temperature
Range
Capacitance Change Each Temperature (%)
–55°C
–25°C
–10°C
Max.
Min.
Max.
Min.
Max.
Min.
R1
R *1
JIS
20°C
–55 to 125°C
±15%
–55 to 125°C
-
-
-
-
-
-
R3
R
JIS
20°C
–55 to 125°C
±15%
–55 to 125°C
-
-
-
-
-
-
R6
X5R
EIA
25°C
–55 to 85°C
±15%
–55 to 85°C
-
-
-
-
-
-
–55 to 125°C
±15%
–55 to 125°C
-
-
-
-
-
-
R7
X7R
R8
R9
EIA
25°C
R *1
JIS
20°C
–25 to 85°C
±15%
–25 to 85°C
-
-
-
-
-
-
X8R
EIA
25°C
–55 to 150°C
±15%
–55 to 150°C
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
W0
-
*2
25°C
–55 to 125°C
±10% *3
+22%, –33% *4
–55 to 125°C
*1 Capacitance change is specified with 50% rated voltage applied.
*2 Murata Temperature Characteristic Code.
*3 Apply DC350V bias.
*4 No DC bias.
yRated Voltage
iCapacitance Tolerance
Code
Rated Voltage
Code
Capacitance Tolerance
0E
DC2.5V
B
±0.1pF
0G
DC4V
C
±0.25pF
±0.5pF (10pF and below)
0J
DC6.3V
1A
DC10V
1C
DC16V
F
±1%
1E
DC25V
G
±2%
YA
DC35V
J
±5%
1H
DC50V
K
±10%
2A
DC100V
M
±20%
2D
DC200V
N
±30%
2E
DC250V
R
Depends on individual standards.
D
±0.5% (10pF and over)
YD
DC300V
W
±0.05pF
2W
DC450V
X
Depends on individual standards.
2H
DC500V
Y
Depends on individual standards.
2J
DC630V
Z
+80/–20%
3A
DC1kV
3D
DC2kV
3F
DC3.15kV
BB
DC350V (for Camera Flash Circuit)
oIndividual Specification Code (Except LLR)
Expressed by three figures.
E2
AC250V
oESR (LLR Only)
GC
X1/Y2; AC250V (Safety Standard Certified Type GC)
Code
ESR
GF
Y2, X1/Y2; AC250V (Safety Standard Certified Type GF)
E01
100mΩ
GD
Y3; AC250V (Safety Standard Certified Type GD)
E03
220mΩ
GB
X2; AC250V (Safety Standard Certified Type GB)
E05
470mΩ
E07
1000mΩ
uCapacitance
Expressed by three-digit alphanumerics. The unit is picofarad
(pF). The first and second figures are significant digits, and the
third figure expresses the number of zeros which follow the two
numbers. If there is a decimal point, it is expressed by the capital
letter "R." In this case, all figures are significant digits.
If any alphabet, other than "R", is included, this indicates the
specific part number is a non-standard part.
Ex.)
!0Packaging
Code
Packaging
L
ø180mm Embossed Taping
D
ø180mm Paper Taping
E
ø180mm Paper Taping (LLL15)
K
ø330mm Embossed Taping
Code
Capacitance
J
ø330mm Paper Taping
R50
0.5pF
F
ø330mm Paper Taping (LLL15)
1R0
1.0pF
B
Bulk
100
10pF
C
Bulk Case
103
10000pF
T
Bulk Tray
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
17
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Metal Terminal Monolithic Ceramic Capacitors
(Part Number)
KR
M
55
T
q
w
e
r t
R7 2A
y
106
M
u
i
H01 K
o
qProduct ID
!0
rHeight Dimension (T)
wSeries
Product ID
Code
Code
Dimension (T)
Series
F
1.9mm
2.7mm
KR
M
Metal Terminal Monolithic Ceramic Capacitors
(DC25V to DC100V)
K
L
2.8mm
3.7mm
3
Metal Terminal Monolithic Ceramic Capacitors
Large Capacitance and High Allowable Ripple
Current Type (DC250V to DC630V)
Q
KR
T
4.8mm
W
6.4mm
eChip Dimension (LgW)
Code
Chip Dimension
EIA
31
3.2g1.6mm
1206
55
5.7g5.0mm
2220
tTemperature Characteristics
Temperature Characteristic Codes
Code
Temperature Characteristics
Public STD Code
Reference
Temperature
Temperature
Range
Temperature
Coefficient
Operating
Temperature
Range
C8
X6S
EIA
25°C
–55 to 105°C
±22%
–55 to 105°C
D7
X7T
EIA
25°C
–55 to 125°C
+22/–33%
–55 to 125°C
R6
X5R
EIA
25°C
–55 to 85°C
±15%
–55 to 85°C
R7
X7R
EIA
25°C
–55 to 125°C
±15%
–55 to 125°C
iCapacitance Tolerance
yRated Voltage
Code
Rated Voltage
Code
Capacitance Tolerance
1E
DC25V
K
±10%
1H
DC50V
M
±20%
1J
DC63V
2A
DC100V
oIndividual Specification Code
2E
DC250V
Expressed by three figures.
2W
DC450V
2J
DC630V
uCapacitance
!0Package
Code
Package
K
ø330mm Embossed Taping
Expressed by three-digit alphanumerics. The unit is pico-farad
(pF). The first and second figures are significant digits, and the
third figure expresses the number of zeros that follow the two
numbers.
Ex.)
Code
Capacitance
105
1.0μF
225
2.2μF
106
10μF
226
22μF
Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.
18
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
p79
High-Q Type GJM Series
H
p82
High Frequency GQM Series
H
p104
Monolithic Microchip GMA Series
p113
For Bonding GMD Series
p115
!Caution/Notice
p118
For General Purpose
GRM Series
Low ESL LLL/LLR/LLA/LLM Series
Capacitor Array
GNM Series
p76
Low ESL
LLp Series
Capacitor Array GNM Series
High-Q Type
GJM Series
p21
High Frequency
GQM Series
(Less than 250Vdc)
Monolithic Microchip
GMA Series
For General Purpose GRM Series
For Bonding
GMD Series
Chip Monolithic Ceramic Capacitors
Product Information
Contents
Oct.1,2012
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Search Capacitors
SPECIFICATIONS AND TEST METHODS, Package, Chart of characteristic data,
please refer to the search for capacitor page website.
http://www.murata.com/products/capacitor/
Detailed specifications sheet
Rated value
SPECIFICATIONS AND TEST METHODS
Package
Caution, Notice
(Storage, Soldering and Mounting, ....etc.)
Chart of characteristic data
The main products published characteristic data.
Frequency characteristics(ESR, Impedance)
S parameter(Smith chart S11)
DC bias characteristics
AC voltage characteristics
Capacitance - temperature characteristics
Calorific property by ripple current
20
C02E.pdf
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors
For General Purpose
GRM Series
For General Purpose GRM Series (Less than 250Vdc)
The most widely used capacitor in the world!
Ideal capacitors can be selected from an abundant lineup.
g
e
Capacitor Array
GNM Series
e
T
W
L
1 Lineup of small size and large capacity capacitors is available.
2 Since the external electrodes consist of a plated structure, the product is excellent in soldering heat resistance,
Low ESL
LLp Series
and flow (GRM18/21/31 types only) and reflow soldering can be used.
3 High reliability with no polarity.
4 Low impedance in high frequencies, and excellent in pulse response and noise elimination.
5 The profile dimensions have been standardized with high precision, therefore high reliability can be acquired in the case of
automatic mounting.
High-Q Type
GJM Series
6 Paper tape or embossed tape is used for the packaging, according to the chip size.
Product Information
For Bonding
GMD Series
Monolithic Microchip
GMA Series
High Frequency
GQM Series
GRM15/18/21 (T = 0.6, 1.25) can also be supplied in bulk cases.
21
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
c 0.4×0.2mm
For General Purpose
GRM Series
T
max.
Rated
TC
Voltage Code
0.22mm 16Vdc
T
max.
Ultracompact
C0G
Cap.
Tol.
Part Number
Rated
TC
Voltage Code
0.22mm 16Vdc
C0G
Cap.
2.2pF
Tol.
Part Number
±0.05pF GRM0225C1C2R2WD05#
±0.1pF GRM0225C1C2R2BD05#
0.2pF
±0.05pF GRM0225C1CR20WD05#
0.3pF
±0.05pF GRM0225C1CR30WD05#
0.4pF
±0.05pF GRM0225C1CR40WD05#
±0.1pF GRM0225C1CR40BD05#
±0.1pF GRM0225C1C2R4BD05#
0.5pF
±0.05pF GRM0225C1CR50WD05#
±0.25pF GRM0225C1C2R4CD05#
±0.1pF GRM0225C1CR20BD05#
±0.25pF GRM0225C1C2R2CD05#
2.3pF
±0.1pF GRM0225C1C2R3BD05#
±0.1pF GRM0225C1CR30BD05#
Capacitor Array
GNM Series
±0.1pF GRM0225C1CR50BD05#
0.6pF
0.7pF
0.8pF
Low ESL
LLp Series
1.0pF
1.1pF
High-Q Type
GJM Series
1.2pF
±0.25pF GRM0225C1C2R3CD05#
2.4pF
2.5pF
±0.1pF GRM0225C1C2R5BD05#
±0.25pF GRM0225C1C2R5CD05#
±0.05pF GRM0225C1CR70WD05#
2.6pF
High Frequency
GQM Series
1.5pF
Monolithic Microchip
GMA Series
1.6pF
1.7pF
For Bonding
GMD Series
1.8pF
1.9pF
±0.1pF GRM0225C1C2R6BD05#
±0.05pF GRM0225C1CR80WD05#
±0.25pF GRM0225C1C2R6CD05#
2.7pF
±0.1pF GRM0225C1C2R7BD05#
±0.1pF GRM0225C1CR90BD05#
±0.25pF GRM0225C1C2R7CD05#
±0.05pF GRM0225C1C1R0WD05#
2.8pF
±0.05pF GRM0225C1C2R8WD05#
±0.1pF GRM0225C1C1R0BD05#
±0.1pF GRM0225C1C2R8BD05#
±0.25pF GRM0225C1C1R0CD05#
±0.25pF GRM0225C1C2R8CD05#
±0.05pF GRM0225C1C1R1WD05#
2.9pF
±0.05pF GRM0225C1C2R9WD05#
±0.1pF GRM0225C1C1R1BD05#
±0.1pF GRM0225C1C2R9BD05#
±0.25pF GRM0225C1C1R1CD05#
±0.25pF GRM0225C1C2R9CD05#
±0.05pF GRM0225C1C1R2WD05#
3.0pF
±0.05pF GRM0225C1C1R3WD05#
±0.05pF GRM0225C1C3R0WD05#
±0.1pF GRM0225C1C3R0BD05#
±0.25pF GRM0225C1C3R0CD05#
3.1pF
±0.05pF GRM0225C1C3R1WD05#
±0.1pF GRM0225C1C1R3BD05#
±0.1pF GRM0225C1C3R1BD05#
±0.25pF GRM0225C1C1R3CD05#
±0.25pF GRM0225C1C3R1CD05#
±0.05pF GRM0225C1C1R4WD05#
3.2pF
±0.05pF GRM0225C1C3R2WD05#
±0.1pF GRM0225C1C1R4BD05#
±0.1pF GRM0225C1C3R2BD05#
±0.25pF GRM0225C1C1R4CD05#
±0.25pF GRM0225C1C3R2CD05#
±0.05pF GRM0225C1C1R5WD05#
3.3pF
±0.05pF GRM0225C1C3R3WD05#
±0.1pF GRM0225C1C1R5BD05#
±0.1pF GRM0225C1C3R3BD05#
±0.25pF GRM0225C1C1R5CD05#
±0.25pF GRM0225C1C3R3CD05#
±0.05pF GRM0225C1C1R6WD05#
3.4pF
±0.05pF GRM0225C1C3R4WD05#
±0.1pF GRM0225C1C1R6BD05#
±0.1pF GRM0225C1C3R4BD05#
±0.25pF GRM0225C1C1R6CD05#
±0.25pF GRM0225C1C3R4CD05#
±0.05pF GRM0225C1C1R7WD05#
3.5pF
±0.05pF GRM0225C1C3R5WD05#
±0.1pF GRM0225C1C1R7BD05#
±0.1pF GRM0225C1C3R5BD05#
±0.25pF GRM0225C1C1R7CD05#
±0.25pF GRM0225C1C3R5CD05#
±0.05pF GRM0225C1C1R8WD05#
3.6pF
±0.05pF GRM0225C1C3R6WD05#
±0.1pF GRM0225C1C1R8BD05#
±0.1pF GRM0225C1C3R6BD05#
±0.25pF GRM0225C1C1R8CD05#
±0.25pF GRM0225C1C3R6CD05#
±0.05pF GRM0225C1C1R9WD05#
3.7pF
Product Information
±0.05pF GRM0225C1C2R0WD05#
±0.05pF GRM0225C1C3R7WD05#
±0.1pF GRM0225C1C3R7BD05#
±0.25pF GRM0225C1C1R9CD05#
2.1pF
±0.05pF GRM0225C1C2R7WD05#
±0.05pF GRM0225C1CR90WD05#
±0.1pF GRM0225C1C1R9BD05#
2.0pF
±0.05pF GRM0225C1C2R6WD05#
±0.1pF GRM0225C1CR70BD05#
±0.25pF GRM0225C1C1R2CD05#
1.4pF
±0.05pF GRM0225C1C2R5WD05#
±0.1pF GRM0225C1CR60BD05#
±0.1pF GRM0225C1C1R2BD05#
1.3pF
±0.05pF GRM0225C1C2R4WD05#
±0.05pF GRM0225C1CR60WD05#
±0.1pF GRM0225C1CR80BD05#
0.9pF
±0.05pF GRM0225C1C2R3WD05#
±0.25pF GRM0225C1C3R7CD05#
3.8pF
±0.05pF GRM0225C1C3R8WD05#
±0.1pF GRM0225C1C2R0BD05#
±0.1pF GRM0225C1C3R8BD05#
±0.25pF GRM0225C1C2R0CD05#
±0.25pF GRM0225C1C3R8CD05#
±0.05pF GRM0225C1C2R1WD05#
±0.1pF GRM0225C1C2R1BD05#
±0.25pF GRM0225C1C2R1CD05#
3.9pF
±0.05pF GRM0225C1C3R9WD05#
±0.1pF GRM0225C1C3R9BD05#
±0.25pF GRM0225C1C3R9CD05#
Part number # indicates the package specification code.
22
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 0.4×0.2mm)
C0G
5.6pF
±0.1pF GRM0225C1C4R0BD05#
4.2pF
±0.05pF GRM0225C1C4R1WD05#
±0.5pF GRM0225C1C5R6DD05#
5.7pF
±0.25pF GRM0225C1C4R1CD05#
±0.25pF GRM0225C1C5R7CD05#
±0.05pF GRM0225C1C4R2WD05#
±0.5pF GRM0225C1C5R7DD05#
5.8pF
4.6pF
±0.25pF GRM0225C1C4R2CD05#
±0.1pF GRM0225C1C5R8BD05#
±0.25pF GRM0225C1C5R8CD05#
±0.5pF GRM0225C1C5R8DD05#
5.9pF
±0.1pF GRM0225C1C5R9BD05#
±0.1pF GRM0225C1C4R4BD05#
±0.25pF GRM0225C1C5R9CD05#
±0.25pF GRM0225C1C4R4CD05#
±0.5pF GRM0225C1C5R9DD05#
±0.05pF GRM0225C1C4R5WD05#
6.0pF
±0.1pF GRM0225C1C4R5BD05#
±0.1pF GRM0225C1C6R0BD05#
±0.25pF GRM0225C1C6R0CD05#
±0.05pF GRM0225C1C4R6WD05#
±0.5pF GRM0225C1C6R0DD05#
6.1pF
±0.1pF GRM0225C1C6R1BD05#
±0.05pF GRM0225C1C4R7WD05#
±0.25pF GRM0225C1C6R1CD05#
±0.5pF GRM0225C1C6R1DD05#
6.2pF
±0.1pF GRM0225C1C6R2BD05#
±0.1pF GRM0225C1C4R8BD05#
±0.25pF GRM0225C1C6R2CD05#
±0.05pF GRM0225C1C4R9WD05#
±0.5pF GRM0225C1C6R2DD05#
6.3pF
±0.1pF GRM0225C1C4R9BD05#
±0.1pF GRM0225C1C6R3BD05#
±0.25pF GRM0225C1C6R3CD05#
±0.05pF GRM0225C1C5R0WD05#
±0.5pF GRM0225C1C6R3DD05#
6.4pF
±0.1pF GRM0225C1C6R4BD05#
±0.05pF GRM0225C1C5R1WD05#
±0.25pF GRM0225C1C6R4CD05#
±0.1pF GRM0225C1C5R1BD05#
±0.5pF GRM0225C1C6R4DD05#
6.5pF
±0.1pF GRM0225C1C6R5BD05#
±0.05pF GRM0225C1C5R2WD05#
±0.25pF GRM0225C1C6R5CD05#
±0.25pF GRM0225C1C5R2CD05#
±0.5pF GRM0225C1C6R5DD05#
6.6pF
±0.5pF GRM0225C1C5R2DD05#
±0.1pF GRM0225C1C6R6BD05#
±0.25pF GRM0225C1C6R6CD05#
±0.1pF GRM0225C1C5R3BD05#
±0.5pF GRM0225C1C6R6DD05#
6.7pF
±0.5pF GRM0225C1C5R3DD05#
±0.1pF GRM0225C1C6R7BD05#
±0.25pF GRM0225C1C6R7CD05#
±0.1pF GRM0225C1C5R4BD05#
±0.5pF GRM0225C1C6R7DD05#
6.8pF
±0.05pF GRM0225C1C6R8WD05#
±0.5pF GRM0225C1C5R4DD05#
±0.1pF GRM0225C1C6R8BD05#
±0.05pF GRM0225C1C5R5WD05#
±0.25pF GRM0225C1C6R8CD05#
±0.1pF GRM0225C1C5R5BD05#
±0.25pF GRM0225C1C5R5CD05#
±0.5pF GRM0225C1C5R5DD05#
5.6pF
±0.05pF GRM0225C1C6R7WD05#
±0.05pF GRM0225C1C5R4WD05#
±0.25pF GRM0225C1C5R4CD05#
5.5pF
±0.05pF GRM0225C1C6R6WD05#
±0.05pF GRM0225C1C5R3WD05#
±0.25pF GRM0225C1C5R3CD05#
5.4pF
±0.05pF GRM0225C1C6R5WD05#
±0.5pF GRM0225C1C5R1DD05#
±0.1pF GRM0225C1C5R2BD05#
5.3pF
±0.05pF GRM0225C1C6R4WD05#
±0.25pF GRM0225C1C5R0CD05#
±0.25pF GRM0225C1C5R1CD05#
5.2pF
±0.05pF GRM0225C1C6R3WD05#
±0.25pF GRM0225C1C4R9CD05#
±0.1pF GRM0225C1C5R0BD05#
5.1pF
±0.05pF GRM0225C1C6R2WD05#
±0.05pF GRM0225C1C4R8WD05#
±0.25pF GRM0225C1C4R8CD05#
5.0pF
±0.05pF GRM0225C1C6R1WD05#
±0.25pF GRM0225C1C4R6CD05#
±0.25pF GRM0225C1C4R7CD05#
4.9pF
±0.05pF GRM0225C1C6R0WD05#
±0.25pF GRM0225C1C4R5CD05#
±0.1pF GRM0225C1C4R7BD05#
4.8pF
±0.05pF GRM0225C1C5R9WD05#
±0.05pF GRM0225C1C4R4WD05#
±0.1pF GRM0225C1C4R6BD05#
4.7pF
±0.05pF GRM0225C1C5R8WD05#
±0.05pF GRM0225C1C4R3WD05#
±0.1pF GRM0225C1C4R3BD05#
4.5pF
±0.05pF GRM0225C1C5R7WD05#
±0.1pF GRM0225C1C5R7BD05#
±0.25pF GRM0225C1C4R3CD05#
4.4pF
±0.1pF GRM0225C1C5R6BD05#
±0.1pF GRM0225C1C4R1BD05#
±0.1pF GRM0225C1C4R2BD05#
4.3pF
Part Number
±0.25pF GRM0225C1C5R6CD05#
±0.25pF GRM0225C1C4R0CD05#
4.1pF
Tol.
±0.05pF GRM0225C1C5R6WD05#
For General Purpose
GRM Series
0.22mm 16Vdc
Cap.
Capacitor Array
GNM Series
Rated
TC
Voltage Code
Low ESL
LLp Series
±0.05pF GRM0225C1C4R0WD05#
T
max.
High-Q Type
GJM Series
4.0pF
Part Number
High Frequency
GQM Series
C0G
Tol.
Monolithic Microchip
GMA Series
0.22mm 16Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
±0.5pF GRM0225C1C6R8DD05#
6.9pF
±0.05pF GRM0225C1C6R9WD05#
±0.1pF GRM0225C1C6R9BD05#
±0.25pF GRM0225C1C6R9CD05#
Part number # indicates the package specification code.
23
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 0.4×0.2mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.22mm 16Vdc
C0G
Cap.
Tol.
Part Number
6.9pF
±0.5pF GRM0225C1C6R9DD05#
7.0pF
±0.05pF GRM0225C1C7R0WD05#
T
max.
Rated
TC
Voltage Code
0.22mm 16Vdc
C0G
Cap.
8.3pF
7.1pF
±0.1pF GRM0225C1C8R4BD05#
±0.05pF GRM0225C1C7R1WD05#
±0.25pF GRM0225C1C8R4CD05#
±0.5pF GRM0225C1C8R4DD05#
8.5pF
Capacitor Array
GNM Series
±0.5pF GRM0225C1C7R1DD05#
±0.1pF GRM0225C1C8R5BD05#
±0.25pF GRM0225C1C8R5CD05#
±0.1pF GRM0225C1C7R2BD05#
±0.5pF GRM0225C1C8R5DD05#
8.6pF
±0.5pF GRM0225C1C7R2DD05#
±0.1pF GRM0225C1C8R6BD05#
±0.25pF GRM0225C1C8R6CD05#
±0.1pF GRM0225C1C7R3BD05#
±0.5pF GRM0225C1C8R6DD05#
Low ESL
LLp Series
8.7pF
±0.5pF GRM0225C1C7R3DD05#
±0.1pF GRM0225C1C8R7BD05#
±0.25pF GRM0225C1C8R7CD05#
±0.1pF GRM0225C1C7R4BD05#
±0.5pF GRM0225C1C8R7DD05#
8.8pF
±0.1pF GRM0225C1C8R8BD05#
±0.05pF GRM0225C1C7R5WD05#
±0.25pF GRM0225C1C8R8CD05#
High-Q Type
GJM Series
±0.25pF GRM0225C1C7R5CD05#
±0.5pF GRM0225C1C8R8DD05#
8.9pF
±0.5pF GRM0225C1C7R5DD05#
±0.1pF GRM0225C1C8R9BD05#
±0.25pF GRM0225C1C8R9CD05#
±0.1pF GRM0225C1C7R6BD05#
±0.5pF GRM0225C1C8R9DD05#
9.0pF
High Frequency
GQM Series
±0.5pF GRM0225C1C7R6DD05#
±0.1pF GRM0225C1C9R0BD05#
±0.25pF GRM0225C1C9R0CD05#
±0.1pF GRM0225C1C7R7BD05#
±0.5pF GRM0225C1C9R0DD05#
9.1pF
±0.1pF GRM0225C1C9R1BD05#
±0.05pF GRM0225C1C7R8WD05#
±0.25pF GRM0225C1C9R1CD05#
Monolithic Microchip
GMA Series
±0.1pF GRM0225C1C7R8BD05#
±0.5pF GRM0225C1C9R1DD05#
9.2pF
±0.1pF GRM0225C1C9R2BD05#
±0.05pF GRM0225C1C7R9WD05#
±0.25pF GRM0225C1C9R2CD05#
±0.25pF GRM0225C1C7R9CD05#
±0.5pF GRM0225C1C9R2DD05#
9.3pF
±0.5pF GRM0225C1C7R9DD05#
±0.1pF GRM0225C1C9R3BD05#
±0.25pF GRM0225C1C9R3CD05#
For Bonding
GMD Series
±0.1pF GRM0225C1C8R0BD05#
±0.5pF GRM0225C1C9R3DD05#
9.4pF
±0.05pF GRM0225C1C9R4WD05#
±0.5pF GRM0225C1C8R0DD05#
±0.1pF GRM0225C1C9R4BD05#
±0.05pF GRM0225C1C8R1WD05#
±0.25pF GRM0225C1C9R4CD05#
±0.1pF GRM0225C1C8R1BD05#
±0.5pF GRM0225C1C9R4DD05#
±0.25pF GRM0225C1C8R1CD05#
9.5pF
±0.05pF GRM0225C1C9R5WD05#
Product Information
±0.5pF GRM0225C1C8R1DD05#
±0.1pF GRM0225C1C9R5BD05#
±0.05pF GRM0225C1C8R2WD05#
±0.25pF GRM0225C1C9R5CD05#
±0.1pF GRM0225C1C8R2BD05#
±0.25pF GRM0225C1C8R2CD05#
±0.5pF GRM0225C1C8R2DD05#
8.3pF
±0.05pF GRM0225C1C9R3WD05#
±0.05pF GRM0225C1C8R0WD05#
±0.25pF GRM0225C1C8R0CD05#
8.2pF
±0.05pF GRM0225C1C9R2WD05#
±0.5pF GRM0225C1C7R8DD05#
±0.1pF GRM0225C1C7R9BD05#
8.1pF
±0.05pF GRM0225C1C9R1WD05#
±0.5pF GRM0225C1C7R7DD05#
±0.25pF GRM0225C1C7R8CD05#
8.0pF
±0.05pF GRM0225C1C9R0WD05#
±0.05pF GRM0225C1C7R7WD05#
±0.25pF GRM0225C1C7R7CD05#
7.9pF
±0.05pF GRM0225C1C8R9WD05#
±0.05pF GRM0225C1C7R6WD05#
±0.25pF GRM0225C1C7R6CD05#
7.8pF
±0.05pF GRM0225C1C8R8WD05#
±0.5pF GRM0225C1C7R4DD05#
±0.1pF GRM0225C1C7R5BD05#
7.7pF
±0.05pF GRM0225C1C8R7WD05#
±0.05pF GRM0225C1C7R4WD05#
±0.25pF GRM0225C1C7R4CD05#
7.6pF
±0.05pF GRM0225C1C8R6WD05#
±0.05pF GRM0225C1C7R3WD05#
±0.25pF GRM0225C1C7R3CD05#
7.5pF
±0.05pF GRM0225C1C8R5WD05#
±0.05pF GRM0225C1C7R2WD05#
±0.25pF GRM0225C1C7R2CD05#
7.4pF
±0.05pF GRM0225C1C8R4WD05#
±0.5pF GRM0225C1C7R0DD05#
±0.25pF GRM0225C1C7R1CD05#
7.3pF
±0.1pF GRM0225C1C8R3BD05#
±0.5pF GRM0225C1C8R3DD05#
8.4pF
±0.1pF GRM0225C1C7R1BD05#
7.2pF
Part Number
±0.25pF GRM0225C1C8R3CD05#
±0.1pF GRM0225C1C7R0BD05#
±0.25pF GRM0225C1C7R0CD05#
Tol.
±0.05pF GRM0225C1C8R3WD05#
±0.5pF GRM0225C1C9R5DD05#
9.6pF
±0.05pF GRM0225C1C9R6WD05#
±0.1pF GRM0225C1C9R6BD05#
±0.25pF GRM0225C1C9R6CD05#
Part number # indicates the package specification code.
24
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 0.4×0.2mm)
0.22mm 16Vdc
CK
1.3pF
±0.05pF GRM0224C1C1R3WD05#
±0.1pF GRM0224C1C1R3BD05#
±0.5pF GRM0225C1C9R7DD05#
±0.25pF GRM0224C1C1R3CD05#
±0.05pF GRM0225C1C9R8WD05#
1.4pF
±0.05pF GRM0224C1C1R4WD05#
±0.1pF GRM0225C1C9R8BD05#
±0.1pF GRM0224C1C1R4BD05#
±0.25pF GRM0225C1C9R8CD05#
±0.25pF GRM0224C1C1R4CD05#
1.5pF
±0.05pF GRM0225C1C9R9WD05#
±0.05pF GRM0224C1C1R5WD05#
±0.1pF GRM0224C1C1R5BD05#
±0.1pF GRM0225C1C9R9BD05#
±0.25pF GRM0224C1C1R5CD05#
±0.25pF GRM0225C1C9R9CD05#
1.6pF
±0.05pF GRM0224C1C1R6WD05#
±0.5pF GRM0225C1C9R9DD05#
±0.1pF GRM0224C1C1R6BD05#
±2%
GRM0225C1C100GD05#
±0.25pF GRM0224C1C1R6CD05#
±5%
GRM0225C1C100JD05#
12pF
±2%
GRM0225C1C120GD05#
±5%
GRM0225C1C120JD05#
15pF
±2%
GRM0225C1C150GD05#
±5%
GRM0225C1C150JD05#
±0.1pF GRM0224C1C1R8BD05#
18pF
±2%
GRM0225C1C180GD05#
±0.25pF GRM0224C1C1R8CD05#
±5%
GRM0225C1C180JD05#
±2%
GRM0225C1C220GD05#
±0.1pF GRM0224C1C1R9BD05#
±5%
GRM0225C1C220JD05#
±0.25pF GRM0224C1C1R9CD05#
±2%
GRM0225C1C270GD05#
±5%
GRM0225C1C270JD05#
±0.1pF GRM0224C1C2R0BD05#
33pF
±2%
GRM0225C1C330GD05#
±0.25pF GRM0224C1C2R0CD05#
±5%
GRM0225C1C330JD05#
39pF
±2%
GRM0225C1C390GD05#
±0.1pF GRM0223C1C2R1BD05#
±5%
GRM0225C1C390JD05#
±0.25pF GRM0223C1C2R1CD05#
±2%
GRM0225C1C470GD05#
±5%
GRM0225C1C470JD05#
10pF
22pF
27pF
47pF
CK
±0.1pF GRM0224C1C1R2BD05#
±0.25pF GRM0225C1C9R7CD05#
±0.5pF GRM0225C1C9R8DD05#
9.9pF
Part Number
±0.25pF GRM0224C1C1R2CD05#
±0.1pF GRM0225C1C9R7BD05#
9.8pF
1.2pF
Tol.
0.2pF
0.3pF
0.4pF
1.7pF
±0.25pF GRM0224C1C1R7CD05#
1.8pF
1.9pF
2.0pF
CJ
2.1pF
2.2pF
±0.05pF GRM0224C1C1R9WD05#
±0.05pF GRM0224C1C2R0WD05#
±0.05pF GRM0223C1C2R1WD05#
±0.05pF GRM0223C1C2R2WD05#
±0.25pF GRM0223C1C2R2CD05#
2.3pF
±0.05pF GRM0223C1C2R3WD05#
±0.05pF GRM0224C1CR30WD05#
±0.1pF GRM0223C1C2R3BD05#
±0.1pF GRM0224C1CR30BD05#
±0.25pF GRM0223C1C2R3CD05#
±0.05pF GRM0224C1CR40WD05#
2.4pF
±0.05pF GRM0223C1C2R4WD05#
±0.1pF GRM0223C1C2R4BD05#
±0.05pF GRM0224C1CR50WD05#
±0.1pF GRM0224C1CR50BD05#
0.6pF
±0.05pF GRM0224C1C1R8WD05#
±0.1pF GRM0223C1C2R2BD05#
±0.1pF GRM0224C1CR40BD05#
0.5pF
±0.05pF GRM0224C1C1R7WD05#
±0.1pF GRM0224C1C1R7BD05#
±0.05pF GRM0224C1CR20WD05#
±0.1pF GRM0224C1CR20BD05#
±0.25pF GRM0223C1C2R4CD05#
2.5pF
±0.05pF GRM0223C1C2R5WD05#
±0.05pF GRM0224C1CR60WD05#
±0.1pF GRM0223C1C2R5BD05#
±0.1pF GRM0224C1CR60BD05#
±0.25pF GRM0223C1C2R5CD05#
0.7pF
±0.05pF GRM0224C1CR70WD05#
±0.1pF GRM0224C1CR70BD05#
±0.1pF GRM0223C1C2R6BD05#
0.8pF
±0.05pF GRM0224C1CR80WD05#
±0.25pF GRM0223C1C2R6CD05#
0.9pF
±0.05pF GRM0224C1CR90WD05#
±0.1pF GRM0223C1C2R7BD05#
±0.1pF GRM0224C1CR90BD05#
±0.25pF GRM0223C1C2R7CD05#
±0.1pF GRM0224C1CR80BD05#
1.0pF
1.1pF
1.2pF
±0.05pF GRM0224C1C1R0WD05#
2.6pF
2.7pF
2.8pF
±0.05pF GRM0223C1C2R6WD05#
±0.05pF GRM0223C1C2R7WD05#
±0.05pF GRM0223C1C2R8WD05#
±0.1pF GRM0224C1C1R0BD05#
±0.1pF GRM0223C1C2R8BD05#
±0.25pF GRM0224C1C1R0CD05#
±0.25pF GRM0223C1C2R8CD05#
±0.05pF GRM0224C1C1R1WD05#
2.9pF
±0.05pF GRM0223C1C2R9WD05#
±0.1pF GRM0224C1C1R1BD05#
±0.1pF GRM0223C1C2R9BD05#
±0.25pF GRM0224C1C1R1CD05#
±0.25pF GRM0223C1C2R9CD05#
±0.05pF GRM0224C1C1R2WD05#
For General Purpose
GRM Series
±0.05pF GRM0225C1C9R7WD05#
Cap.
Capacitor Array
GNM Series
±0.5pF GRM0225C1C9R6DD05#
9.7pF
Rated
TC
Voltage Code
Low ESL
LLp Series
9.6pF
T
max.
High-Q Type
GJM Series
Part Number
High Frequency
GQM Series
C0G
Tol.
Monolithic Microchip
GMA Series
0.22mm 16Vdc
Cap.
3.0pF
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
±0.05pF GRM0223C1C3R0WD05#
Part number # indicates the package specification code.
25
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 0.4×0.2mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.22mm 16Vdc
CJ
Cap.
3.0pF
Tol.
Part Number
±0.1pF GRM0223C1C3R0BD05#
T
max.
Rated
TC
Voltage Code
0.22mm 16Vdc
CH
Cap.
4.8pF
±0.25pF GRM0223C1C3R0CD05#
3.1pF
3.2pF
Capacitor Array
GNM Series
3.3pF
3.4pF
±0.05pF GRM0223C1C3R1WD05#
4.9pF
Low ESL
LLp Series
High-Q Type
GJM Series
3.8pF
±0.1pF GRM0222C1C4R9BD05#
±0.05pF GRM0223C1C3R2WD05#
5.0pF
±0.1pF GRM0222C1C5R0BD05#
±0.25pF GRM0223C1C3R2CD05#
±0.25pF GRM0222C1C5R0CD05#
±0.05pF GRM0223C1C3R3WD05#
5.1pF
±0.1pF GRM0222C1C5R1BD05#
±0.25pF GRM0223C1C3R3CD05#
±0.25pF GRM0222C1C5R1CD05#
±0.05pF GRM0223C1C3R4WD05#
±0.5pF GRM0222C1C5R1DD05#
5.2pF
±0.25pF GRM0223C1C3R4CD05#
±0.1pF GRM0222C1C5R2BD05#
±0.25pF GRM0222C1C5R2CD05#
±0.1pF GRM0223C1C3R5BD05#
±0.5pF GRM0222C1C5R2DD05#
5.3pF
High Frequency
GQM Series
Monolithic Microchip
GMA Series
4.2pF
±0.1pF GRM0222C1C5R3BD05#
±0.1pF GRM0223C1C3R6BD05#
±0.25pF GRM0222C1C5R3CD05#
±0.05pF GRM0223C1C3R7WD05#
±0.5pF GRM0222C1C5R3DD05#
5.4pF
±0.1pF GRM0223C1C3R7BD05#
±0.1pF GRM0222C1C5R4BD05#
±0.25pF GRM0222C1C5R4CD05#
±0.05pF GRM0223C1C3R8WD05#
±0.5pF GRM0222C1C5R4DD05#
5.5pF
±0.1pF GRM0222C1C5R5BD05#
±0.05pF GRM0223C1C3R9WD05#
±0.25pF GRM0222C1C5R5CD05#
±0.5pF GRM0222C1C5R5DD05#
5.6pF
±0.1pF GRM0222C1C5R6BD05#
±0.1pF GRM0222C1C4R0BD05#
±0.25pF GRM0222C1C5R6CD05#
±0.05pF GRM0222C1C4R1WD05#
±0.5pF GRM0222C1C5R6DD05#
5.7pF
±0.1pF GRM0222C1C4R1BD05#
±0.1pF GRM0222C1C5R7BD05#
±0.25pF GRM0222C1C5R7CD05#
±0.05pF GRM0222C1C4R2WD05#
±0.5pF GRM0222C1C5R7DD05#
5.8pF
±0.25pF GRM0222C1C4R2CD05#
±0.1pF GRM0222C1C5R8BD05#
±0.25pF GRM0222C1C5R8CD05#
±0.5pF GRM0222C1C5R8DD05#
5.9pF
±0.05pF GRM0222C1C5R9WD05#
For Bonding
GMD Series
±0.05pF GRM0222C1C4R4WD05#
±0.1pF GRM0222C1C5R9BD05#
±0.1pF GRM0222C1C4R4BD05#
±0.25pF GRM0222C1C5R9CD05#
±0.05pF GRM0222C1C4R5WD05#
±0.5pF GRM0222C1C5R9DD05#
6.0pF
±0.05pF GRM0222C1C6R0WD05#
±0.1pF GRM0222C1C4R5BD05#
±0.1pF GRM0222C1C6R0BD05#
±0.25pF GRM0222C1C4R5CD05#
±0.25pF GRM0222C1C6R0CD05#
±0.05pF GRM0222C1C4R6WD05#
±0.5pF GRM0222C1C6R0DD05#
Product Information
6.1pF
±0.05pF GRM0222C1C6R1WD05#
±0.25pF GRM0222C1C4R6CD05#
±0.1pF GRM0222C1C6R1BD05#
±0.05pF GRM0222C1C4R7WD05#
±0.25pF GRM0222C1C6R1CD05#
±0.5pF GRM0222C1C6R1DD05#
±0.1pF GRM0222C1C4R7BD05#
±0.25pF GRM0222C1C4R7CD05#
4.8pF
±0.05pF GRM0222C1C5R8WD05#
±0.05pF GRM0222C1C4R3WD05#
±0.1pF GRM0222C1C4R6BD05#
4.7pF
±0.05pF GRM0222C1C5R7WD05#
±0.25pF GRM0222C1C4R1CD05#
±0.25pF GRM0222C1C4R4CD05#
4.6pF
±0.05pF GRM0222C1C5R6WD05#
±0.05pF GRM0222C1C4R0WD05#
±0.1pF GRM0222C1C4R3BD05#
4.5pF
±0.05pF GRM0222C1C5R5WD05#
±0.25pF GRM0223C1C3R8CD05#
±0.25pF GRM0222C1C4R3CD05#
4.4pF
±0.05pF GRM0222C1C5R4WD05#
±0.25pF GRM0223C1C3R7CD05#
±0.1pF GRM0222C1C4R2BD05#
4.3pF
±0.05pF GRM0222C1C5R3WD05#
±0.05pF GRM0223C1C3R6WD05#
±0.25pF GRM0222C1C4R0CD05#
4.1pF
±0.05pF GRM0222C1C5R2WD05#
±0.05pF GRM0223C1C3R5WD05#
±0.25pF GRM0223C1C3R9CD05#
4.0pF
±0.05pF GRM0222C1C5R1WD05#
±0.1pF GRM0223C1C3R3BD05#
±0.1pF GRM0223C1C3R9BD05#
CH
±0.05pF GRM0222C1C5R0WD05#
±0.1pF GRM0223C1C3R2BD05#
±0.1pF GRM0223C1C3R8BD05#
3.9pF
±0.05pF GRM0222C1C4R9WD05#
±0.25pF GRM0222C1C4R9CD05#
±0.25pF GRM0223C1C3R6CD05#
3.7pF
±0.1pF GRM0222C1C4R8BD05#
±0.25pF GRM0222C1C4R8CD05#
±0.25pF GRM0223C1C3R1CD05#
±0.25pF GRM0223C1C3R5CD05#
3.6pF
Part Number
±0.1pF GRM0223C1C3R1BD05#
±0.1pF GRM0223C1C3R4BD05#
3.5pF
Tol.
±0.05pF GRM0222C1C4R8WD05#
6.2pF
±0.05pF GRM0222C1C6R2WD05#
±0.1pF GRM0222C1C6R2BD05#
Part number # indicates the package specification code.
26
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 0.4×0.2mm)
CH
7.6pF
±0.1pF GRM0222C1C7R6BD05#
±0.25pF GRM0222C1C7R6CD05#
±0.5pF GRM0222C1C7R6DD05#
7.7pF
±0.5pF GRM0222C1C6R3DD05#
±0.1pF GRM0222C1C7R7BD05#
±0.25pF GRM0222C1C7R7CD05#
±0.1pF GRM0222C1C6R4BD05#
±0.5pF GRM0222C1C7R7DD05#
7.8pF
±0.1pF GRM0222C1C7R8BD05#
±0.05pF GRM0222C1C6R5WD05#
±0.25pF GRM0222C1C7R8CD05#
±0.25pF GRM0222C1C6R5CD05#
±0.5pF GRM0222C1C7R8DD05#
7.9pF
±0.5pF GRM0222C1C6R5DD05#
±0.1pF GRM0222C1C7R9BD05#
±0.25pF GRM0222C1C7R9CD05#
±0.1pF GRM0222C1C6R6BD05#
±0.5pF GRM0222C1C7R9DD05#
8.0pF
±0.1pF GRM0222C1C8R0BD05#
±0.05pF GRM0222C1C6R7WD05#
±0.25pF GRM0222C1C8R0CD05#
±0.1pF GRM0222C1C6R7BD05#
±0.5pF GRM0222C1C8R0DD05#
8.1pF
±0.5pF GRM0222C1C6R7DD05#
±0.1pF GRM0222C1C8R1BD05#
±0.25pF GRM0222C1C8R1CD05#
±0.1pF GRM0222C1C6R8BD05#
±0.5pF GRM0222C1C8R1DD05#
8.2pF
±0.1pF GRM0222C1C8R2BD05#
±0.05pF GRM0222C1C6R9WD05#
±0.25pF GRM0222C1C8R2CD05#
±0.25pF GRM0222C1C6R9CD05#
±0.5pF GRM0222C1C8R2DD05#
8.3pF
±0.5pF GRM0222C1C6R9DD05#
±0.1pF GRM0222C1C8R3BD05#
±0.25pF GRM0222C1C8R3CD05#
±0.1pF GRM0222C1C7R0BD05#
±0.5pF GRM0222C1C8R3DD05#
8.4pF
±0.5pF GRM0222C1C7R0DD05#
±0.1pF GRM0222C1C8R4BD05#
±0.25pF GRM0222C1C8R4CD05#
±0.1pF GRM0222C1C7R1BD05#
±0.5pF GRM0222C1C8R4DD05#
8.5pF
±0.5pF GRM0222C1C7R1DD05#
±0.1pF GRM0222C1C8R5BD05#
±0.25pF GRM0222C1C8R5CD05#
±0.1pF GRM0222C1C7R2BD05#
±0.5pF GRM0222C1C8R5DD05#
8.6pF
±0.05pF GRM0222C1C8R6WD05#
±0.5pF GRM0222C1C7R2DD05#
±0.1pF GRM0222C1C8R6BD05#
±0.05pF GRM0222C1C7R3WD05#
±0.25pF GRM0222C1C8R6CD05#
±0.1pF GRM0222C1C7R3BD05#
±0.25pF GRM0222C1C7R3CD05#
±0.5pF GRM0222C1C8R6DD05#
8.7pF
±0.05pF GRM0222C1C8R7WD05#
±0.5pF GRM0222C1C7R3DD05#
±0.1pF GRM0222C1C8R7BD05#
±0.05pF GRM0222C1C7R4WD05#
±0.25pF GRM0222C1C8R7CD05#
±0.1pF GRM0222C1C7R4BD05#
±0.25pF GRM0222C1C7R4CD05#
7.5pF
±0.05pF GRM0222C1C8R5WD05#
±0.05pF GRM0222C1C7R2WD05#
±0.25pF GRM0222C1C7R2CD05#
7.4pF
±0.05pF GRM0222C1C8R4WD05#
±0.05pF GRM0222C1C7R1WD05#
±0.25pF GRM0222C1C7R1CD05#
7.3pF
±0.05pF GRM0222C1C8R3WD05#
±0.05pF GRM0222C1C7R0WD05#
±0.25pF GRM0222C1C7R0CD05#
7.2pF
±0.05pF GRM0222C1C8R2WD05#
±0.5pF GRM0222C1C6R8DD05#
±0.1pF GRM0222C1C6R9BD05#
7.1pF
±0.05pF GRM0222C1C8R1WD05#
±0.05pF GRM0222C1C6R8WD05#
±0.25pF GRM0222C1C6R8CD05#
7.0pF
±0.05pF GRM0222C1C8R0WD05#
±0.5pF GRM0222C1C6R6DD05#
±0.25pF GRM0222C1C6R7CD05#
6.9pF
±0.05pF GRM0222C1C7R9WD05#
±0.05pF GRM0222C1C6R6WD05#
±0.25pF GRM0222C1C6R6CD05#
6.8pF
±0.05pF GRM0222C1C7R8WD05#
±0.5pF GRM0222C1C6R4DD05#
±0.1pF GRM0222C1C6R5BD05#
6.7pF
±0.05pF GRM0222C1C7R7WD05#
±0.05pF GRM0222C1C6R4WD05#
±0.25pF GRM0222C1C6R4CD05#
6.6pF
±0.05pF GRM0222C1C7R6WD05#
±0.05pF GRM0222C1C6R3WD05#
±0.1pF GRM0222C1C6R3BD05#
6.5pF
Part Number
±0.5pF GRM0222C1C6R2DD05#
±0.25pF GRM0222C1C6R3CD05#
6.4pF
Tol.
±0.5pF GRM0222C1C8R7DD05#
8.8pF
±0.05pF GRM0222C1C8R8WD05#
±0.5pF GRM0222C1C7R4DD05#
±0.1pF GRM0222C1C8R8BD05#
±0.05pF GRM0222C1C7R5WD05#
±0.25pF GRM0222C1C8R8CD05#
±0.5pF GRM0222C1C8R8DD05#
±0.1pF GRM0222C1C7R5BD05#
±0.25pF GRM0222C1C7R5CD05#
±0.5pF GRM0222C1C7R5DD05#
For General Purpose
GRM Series
0.22mm 16Vdc
Cap.
Capacitor Array
GNM Series
Rated
TC
Voltage Code
Low ESL
LLp Series
6.3pF
±0.25pF GRM0222C1C6R2CD05#
T
max.
High-Q Type
GJM Series
6.2pF
Part Number
High Frequency
GQM Series
CH
Tol.
Monolithic Microchip
GMA Series
0.22mm 16Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
8.9pF
±0.05pF GRM0222C1C8R9WD05#
±0.1pF GRM0222C1C8R9BD05#
Part number # indicates the package specification code.
27
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 0.4×0.2mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.22mm 16Vdc
CH
Cap.
8.9pF
Tol.
Part Number
±0.25pF GRM0222C1C8R9CD05#
T
max.
Rated
TC
Voltage Code
0.22mm 16Vdc
CH
Cap.
Tol.
33pF
±2%
GRM0222C1C330GD05#
±5%
GRM0222C1C330JD05#
±2%
GRM0222C1C390GD05#
±5%
GRM0222C1C390JD05#
47pF
±2%
GRM0222C1C470GD05#
±5%
GRM0222C1C470JD05#
56pF
±2%
GRM0225C1A560GD05#
±5%
GRM0225C1A560JD05#
±2%
GRM0225C1A680GD05#
±5%
GRM0225C1A680JD05#
±2%
GRM0225C1A820GD05#
±5%
GRM0225C1A820JD05#
±2%
GRM0225C1A101GD05#
±5%
GRM0225C1A101JD05#
±2%
GRM0222C1A560GD05#
±5%
GRM0222C1A560JD05#
±2%
GRM0222C1A680GD05#
±5%
GRM0222C1A680JD05#
±2%
GRM0222C1A820GD05#
±5%
GRM0222C1A820JD05#
±2%
GRM0222C1A101GD05#
±5%
GRM0222C1A101JD05#
±0.5pF GRM0222C1C8R9DD05#
9.0pF
±0.05pF GRM0222C1C9R0WD05#
39pF
±0.1pF GRM0222C1C9R0BD05#
±0.25pF GRM0222C1C9R0CD05#
±0.5pF GRM0222C1C9R0DD05#
9.1pF
±0.05pF GRM0222C1C9R1WD05#
10Vdc
C0G
±0.1pF GRM0222C1C9R1BD05#
Capacitor Array
GNM Series
±0.25pF GRM0222C1C9R1CD05#
68pF
±0.5pF GRM0222C1C9R1DD05#
9.2pF
±0.05pF GRM0222C1C9R2WD05#
82pF
±0.1pF GRM0222C1C9R2BD05#
±0.25pF GRM0222C1C9R2CD05#
100pF
±0.5pF GRM0222C1C9R2DD05#
9.3pF
±0.05pF GRM0222C1C9R3WD05#
CH
56pF
Low ESL
LLp Series
±0.1pF GRM0222C1C9R3BD05#
±0.25pF GRM0222C1C9R3CD05#
68pF
±0.5pF GRM0222C1C9R3DD05#
9.4pF
±0.05pF GRM0222C1C9R4WD05#
82pF
±0.1pF GRM0222C1C9R4BD05#
±0.25pF GRM0222C1C9R4CD05#
100pF
±0.5pF GRM0222C1C9R4DD05#
High-Q Type
GJM Series
9.5pF
±0.05pF GRM0222C1C9R5WD05#
±0.1pF GRM0222C1C9R5BD05#
±0.25pF GRM0222C1C9R5CD05#
±0.5pF GRM0222C1C9R5DD05#
9.6pF
±0.05pF GRM0222C1C9R6WD05#
±0.1pF GRM0222C1C9R6BD05#
c 0.6×0.3mm
T
max.
Ultracompact
Rated
TC
Voltage Code
0.33mm 50Vdc
C0G
Cap.
High Frequency
GQM Series
±0.5pF GRM0222C1C9R6DD05#
0.2pF
±0.05pF GRM0335C1HR20WA01#
±0.1pF GRM0335C1HR10BA01#
±0.1pF GRM0335C1HR20BA01#
0.3pF
±0.05pF GRM0335C1HR30WA01#
0.4pF
±0.05pF GRM0335C1HR40WA01#
0.5pF
±0.05pF GRM0335C1HR50WA01#
±0.1pF GRM0335C1HR30BA01#
±0.25pF GRM0222C1C9R7CD05#
±0.5pF GRM0222C1C9R7DD05#
Monolithic Microchip
GMA Series
9.8pF
±0.1pF GRM0335C1HR40BA01#
±0.05pF GRM0222C1C9R8WD05#
±0.1pF GRM0222C1C9R8BD05#
±0.1pF GRM0335C1HR50BA01#
±0.25pF GRM0222C1C9R8CD05#
±0.5pF GRM0222C1C9R8DD05#
9.9pF
0.6pF
±0.05pF GRM0335C1HR60WA01#
0.7pF
±0.05pF GRM0335C1HR70WA01#
0.8pF
±0.05pF GRM0335C1HR80WA01#
0.9pF
±0.05pF GRM0335C1HR90WA01#
1.0pF
±0.05pF GRM0335C1H1R0WA01#
±0.1pF GRM0335C1HR60BA01#
±0.05pF GRM0222C1C9R9WD05#
±0.1pF GRM0222C1C9R9BD05#
±0.1pF GRM0335C1HR70BA01#
±0.25pF GRM0222C1C9R9CD05#
±0.5pF GRM0222C1C9R9DD05#
For Bonding
GMD Series
10pF
12pF
15pF
±2%
GRM0222C1C100GD05#
±5%
GRM0222C1C100JD05#
±2%
GRM0222C1C120GD05#
±5%
GRM0222C1C120JD05#
±2%
GRM0222C1C150GD05#
Part Number
±0.05pF GRM0335C1HR10WA01#
±0.05pF GRM0222C1C9R7WD05#
±0.1pF GRM0222C1C9R7BD05#
Tol.
0.1pF
±0.25pF GRM0222C1C9R6CD05#
9.7pF
Part Number
±0.1pF GRM0335C1HR80BA01#
±0.1pF GRM0335C1HR90BA01#
±0.1pF GRM0335C1H1R0BA01#
±0.25pF GRM0335C1H1R0CA01#
Product Information
±5%
GRM0222C1C150JD05#
18pF
±2%
GRM0222C1C180GD05#
±5%
GRM0222C1C180JD05#
±0.1pF GRM0335C1H1R1BA01#
22pF
±2%
GRM0222C1C220GD05#
±0.25pF GRM0335C1H1R1CA01#
±5%
GRM0222C1C220JD05#
27pF
±2%
GRM0222C1C270GD05#
±5%
GRM0222C1C270JD05#
1.1pF
1.2pF
±0.05pF GRM0335C1H1R1WA01#
±0.05pF GRM0335C1H1R2WA01#
±0.1pF GRM0335C1H1R2BA01#
±0.25pF GRM0335C1H1R2CA01#
Part number # indicates the package specification code.
28
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 0.6×0.3mm)
C0G
3.1pF
1.7pF
1.8pF
1.9pF
2.0pF
2.1pF
±0.1pF GRM0335C1H3R1BA01#
±0.25pF GRM0335C1H3R1CA01#
±0.05pF GRM0335C1H1R4WA01#
3.2pF
±0.05pF GRM0335C1H1R5WA01#
±0.25pF GRM0335C1H3R2CA01#
3.3pF
2.4pF
2.5pF
2.6pF
2.7pF
2.8pF
±0.1pF GRM0335C1H1R5BA01#
±0.1pF GRM0335C1H3R3BA01#
±0.25pF GRM0335C1H3R3CA01#
±0.05pF GRM0335C1H1R6WA01#
3.4pF
±0.1pF GRM0335C1H1R6BA01#
±0.1pF GRM0335C1H3R4BA01#
±0.25pF GRM0335C1H3R4CA01#
±0.05pF GRM0335C1H1R7WA01#
3.5pF
±0.05pF GRM0335C1H3R5WA01#
±0.1pF GRM0335C1H1R7BA01#
±0.1pF GRM0335C1H3R5BA01#
±0.25pF GRM0335C1H1R7CA01#
±0.25pF GRM0335C1H3R5CA01#
±0.05pF GRM0335C1H1R8WA01#
3.6pF
±0.05pF GRM0335C1H3R6WA01#
±0.1pF GRM0335C1H1R8BA01#
±0.1pF GRM0335C1H3R6BA01#
±0.25pF GRM0335C1H1R8CA01#
±0.25pF GRM0335C1H3R6CA01#
±0.05pF GRM0335C1H1R9WA01#
3.7pF
±0.05pF GRM0335C1H3R7WA01#
±0.1pF GRM0335C1H1R9BA01#
±0.1pF GRM0335C1H3R7BA01#
±0.25pF GRM0335C1H1R9CA01#
±0.25pF GRM0335C1H3R7CA01#
±0.05pF GRM0335C1H2R0WA01#
3.8pF
±0.05pF GRM0335C1H3R8WA01#
±0.1pF GRM0335C1H2R0BA01#
±0.1pF GRM0335C1H3R8BA01#
±0.25pF GRM0335C1H2R0CA01#
±0.25pF GRM0335C1H3R8CA01#
±0.05pF GRM0335C1H2R1WA01#
3.9pF
±0.05pF GRM0335C1H2R2WA01#
±0.05pF GRM0335C1H3R9WA01#
±0.1pF GRM0335C1H3R9BA01#
±0.25pF GRM0335C1H3R9CA01#
4.0pF
±0.05pF GRM0335C1H4R0WA01#
±0.1pF GRM0335C1H2R2BA01#
±0.1pF GRM0335C1H4R0BA01#
±0.25pF GRM0335C1H2R2CA01#
±0.25pF GRM0335C1H4R0CA01#
±0.05pF GRM0335C1H2R3WA01#
4.1pF
±0.05pF GRM0335C1H4R1WA01#
±0.1pF GRM0335C1H2R3BA01#
±0.1pF GRM0335C1H4R1BA01#
±0.25pF GRM0335C1H2R3CA01#
±0.25pF GRM0335C1H4R1CA01#
±0.05pF GRM0335C1H2R4WA01#
4.2pF
±0.05pF GRM0335C1H4R2WA01#
±0.1pF GRM0335C1H2R4BA01#
±0.1pF GRM0335C1H4R2BA01#
±0.25pF GRM0335C1H2R4CA01#
±0.25pF GRM0335C1H4R2CA01#
±0.05pF GRM0335C1H2R5WA01#
4.3pF
±0.05pF GRM0335C1H4R3WA01#
±0.1pF GRM0335C1H2R5BA01#
±0.1pF GRM0335C1H4R3BA01#
±0.25pF GRM0335C1H2R5CA01#
±0.25pF GRM0335C1H4R3CA01#
±0.05pF GRM0335C1H2R6WA01#
4.4pF
±0.05pF GRM0335C1H4R4WA01#
±0.1pF GRM0335C1H2R6BA01#
±0.1pF GRM0335C1H4R4BA01#
±0.25pF GRM0335C1H2R6CA01#
±0.25pF GRM0335C1H4R4CA01#
±0.05pF GRM0335C1H2R7WA01#
4.5pF
±0.05pF GRM0335C1H4R5WA01#
±0.1pF GRM0335C1H2R7BA01#
±0.1pF GRM0335C1H4R5BA01#
±0.25pF GRM0335C1H2R7CA01#
±0.25pF GRM0335C1H4R5CA01#
±0.05pF GRM0335C1H2R8WA01#
4.6pF
±0.05pF GRM0335C1H2R9WA01#
±0.05pF GRM0335C1H4R6WA01#
±0.1pF GRM0335C1H4R6BA01#
±0.25pF GRM0335C1H2R8CA01#
3.0pF
±0.05pF GRM0335C1H3R4WA01#
±0.25pF GRM0335C1H1R6CA01#
±0.1pF GRM0335C1H2R8BA01#
2.9pF
±0.05pF GRM0335C1H3R3WA01#
±0.25pF GRM0335C1H1R5CA01#
±0.25pF GRM0335C1H2R1CA01#
2.3pF
±0.05pF GRM0335C1H3R2WA01#
±0.1pF GRM0335C1H3R2BA01#
±0.1pF GRM0335C1H2R1BA01#
2.2pF
±0.05pF GRM0335C1H3R1WA01#
±0.25pF GRM0335C1H1R3CA01#
±0.25pF GRM0335C1H1R4CA01#
1.6pF
Part Number
±0.1pF GRM0335C1H1R3BA01#
±0.1pF GRM0335C1H1R4BA01#
1.5pF
Tol.
±0.25pF GRM0335C1H4R6CA01#
4.7pF
±0.05pF GRM0335C1H4R7WA01#
±0.1pF GRM0335C1H2R9BA01#
±0.1pF GRM0335C1H4R7BA01#
±0.25pF GRM0335C1H2R9CA01#
±0.25pF GRM0335C1H4R7CA01#
±0.05pF GRM0335C1H3R0WA01#
±0.1pF GRM0335C1H3R0BA01#
±0.25pF GRM0335C1H3R0CA01#
For General Purpose
GRM Series
0.33mm 50Vdc
Cap.
Capacitor Array
GNM Series
Rated
TC
Voltage Code
Low ESL
LLp Series
1.4pF
±0.05pF GRM0335C1H1R3WA01#
T
max.
High-Q Type
GJM Series
1.3pF
Part Number
High Frequency
GQM Series
C0G
Tol.
Monolithic Microchip
GMA Series
0.33mm 50Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
4.8pF
Product Information
T
max.
±0.05pF GRM0335C1H4R8WA01#
±0.1pF GRM0335C1H4R8BA01#
±0.25pF GRM0335C1H4R8CA01#
Part number # indicates the package specification code.
29
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 0.6×0.3mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.33mm 50Vdc
C0G
Cap.
4.9pF
5.0pF
Tol.
Part Number
±0.05pF GRM0335C1H4R9WA01#
Rated
TC
Voltage Code
0.33mm 50Vdc
C0G
Cap.
6.3pF
±0.1pF GRM0335C1H6R3BA01#
±0.05pF GRM0335C1H5R0WA01#
±0.5pF GRM0335C1H6R3DA01#
6.4pF
±0.25pF GRM0335C1H5R0CA01#
±0.1pF GRM0335C1H6R4BA01#
±0.25pF GRM0335C1H6R4CA01#
±0.5pF GRM0335C1H6R4DA01#
Capacitor Array
GNM Series
6.5pF
±0.1pF GRM0335C1H6R5BA01#
±0.05pF GRM0335C1H5R2WA01#
±0.25pF GRM0335C1H6R5CA01#
±0.5pF GRM0335C1H6R5DA01#
6.6pF
Low ESL
LLp Series
±0.5pF GRM0335C1H5R2DA01#
±0.1pF GRM0335C1H6R6BA01#
±0.25pF GRM0335C1H6R6CA01#
±0.1pF GRM0335C1H5R3BA01#
±0.5pF GRM0335C1H6R6DA01#
6.7pF
±0.1pF GRM0335C1H6R7BA01#
±0.05pF GRM0335C1H5R4WA01#
±0.25pF GRM0335C1H6R7CA01#
±0.1pF GRM0335C1H5R4BA01#
±0.5pF GRM0335C1H6R7DA01#
6.8pF
High-Q Type
GJM Series
±0.5pF GRM0335C1H5R4DA01#
±0.1pF GRM0335C1H6R8BA01#
±0.25pF GRM0335C1H6R8CA01#
±0.1pF GRM0335C1H5R5BA01#
±0.5pF GRM0335C1H6R8DA01#
6.9pF
±0.1pF GRM0335C1H6R9BA01#
±0.05pF GRM0335C1H5R6WA01#
±0.25pF GRM0335C1H6R9CA01#
High Frequency
GQM Series
±0.25pF GRM0335C1H5R6CA01#
±0.5pF GRM0335C1H6R9DA01#
7.0pF
±0.5pF GRM0335C1H5R6DA01#
±0.1pF GRM0335C1H7R0BA01#
±0.25pF GRM0335C1H7R0CA01#
±0.1pF GRM0335C1H5R7BA01#
±0.5pF GRM0335C1H7R0DA01#
7.1pF
Monolithic Microchip
GMA Series
±0.5pF GRM0335C1H5R7DA01#
±0.1pF GRM0335C1H7R1BA01#
±0.25pF GRM0335C1H7R1CA01#
±0.1pF GRM0335C1H5R8BA01#
±0.5pF GRM0335C1H7R1DA01#
7.2pF
±0.05pF GRM0335C1H7R2WA01#
±0.5pF GRM0335C1H5R8DA01#
±0.1pF GRM0335C1H7R2BA01#
±0.05pF GRM0335C1H5R9WA01#
±0.25pF GRM0335C1H7R2CA01#
±0.1pF GRM0335C1H5R9BA01#
±0.25pF GRM0335C1H5R9CA01#
±0.5pF GRM0335C1H7R2DA01#
7.3pF
±0.05pF GRM0335C1H7R3WA01#
For Bonding
GMD Series
±0.5pF GRM0335C1H5R9DA01#
±0.1pF GRM0335C1H7R3BA01#
±0.05pF GRM0335C1H6R0WA01#
±0.25pF GRM0335C1H7R3CA01#
±0.1pF GRM0335C1H6R0BA01#
±0.25pF GRM0335C1H6R0CA01#
±0.5pF GRM0335C1H7R3DA01#
7.4pF
±0.05pF GRM0335C1H7R4WA01#
±0.5pF GRM0335C1H6R0DA01#
±0.1pF GRM0335C1H7R4BA01#
±0.05pF GRM0335C1H6R1WA01#
±0.25pF GRM0335C1H7R4CA01#
±0.1pF GRM0335C1H6R1BA01#
Product Information
±0.25pF GRM0335C1H6R1CA01#
6.2pF
±0.05pF GRM0335C1H7R1WA01#
±0.05pF GRM0335C1H5R8WA01#
±0.25pF GRM0335C1H5R8CA01#
6.1pF
±0.05pF GRM0335C1H7R0WA01#
±0.05pF GRM0335C1H5R7WA01#
±0.25pF GRM0335C1H5R7CA01#
6.0pF
±0.05pF GRM0335C1H6R9WA01#
±0.5pF GRM0335C1H5R5DA01#
±0.1pF GRM0335C1H5R6BA01#
5.9pF
±0.05pF GRM0335C1H6R8WA01#
±0.05pF GRM0335C1H5R5WA01#
±0.25pF GRM0335C1H5R5CA01#
5.8pF
±0.05pF GRM0335C1H6R7WA01#
±0.5pF GRM0335C1H5R3DA01#
±0.25pF GRM0335C1H5R4CA01#
5.7pF
±0.05pF GRM0335C1H6R6WA01#
±0.05pF GRM0335C1H5R3WA01#
±0.25pF GRM0335C1H5R3CA01#
5.6pF
±0.05pF GRM0335C1H6R5WA01#
±0.5pF GRM0335C1H5R1DA01#
±0.25pF GRM0335C1H5R2CA01#
5.5pF
±0.05pF GRM0335C1H6R4WA01#
±0.05pF GRM0335C1H5R1WA01#
±0.1pF GRM0335C1H5R2BA01#
5.4pF
±0.05pF GRM0335C1H6R3WA01#
±0.25pF GRM0335C1H6R3CA01#
±0.1pF GRM0335C1H5R1BA01#
5.3pF
Part Number
±0.25pF GRM0335C1H4R9CA01#
±0.25pF GRM0335C1H5R1CA01#
5.2pF
Tol.
±0.1pF GRM0335C1H4R9BA01#
±0.1pF GRM0335C1H5R0BA01#
5.1pF
T
max.
±0.5pF GRM0335C1H7R4DA01#
7.5pF
±0.05pF GRM0335C1H7R5WA01#
±0.5pF GRM0335C1H6R1DA01#
±0.1pF GRM0335C1H7R5BA01#
±0.05pF GRM0335C1H6R2WA01#
±0.25pF GRM0335C1H7R5CA01#
±0.5pF GRM0335C1H7R5DA01#
±0.1pF GRM0335C1H6R2BA01#
±0.25pF GRM0335C1H6R2CA01#
±0.5pF GRM0335C1H6R2DA01#
7.6pF
±0.05pF GRM0335C1H7R6WA01#
±0.1pF GRM0335C1H7R6BA01#
Part number # indicates the package specification code.
30
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 0.6×0.3mm)
C0G
9.0pF
±0.1pF GRM0335C1H9R0BA01#
±0.25pF GRM0335C1H9R0CA01#
±0.5pF GRM0335C1H9R0DA01#
9.1pF
±0.5pF GRM0335C1H7R7DA01#
±0.1pF GRM0335C1H9R1BA01#
±0.25pF GRM0335C1H9R1CA01#
±0.1pF GRM0335C1H7R8BA01#
±0.5pF GRM0335C1H9R1DA01#
9.2pF
±0.1pF GRM0335C1H9R2BA01#
±0.05pF GRM0335C1H7R9WA01#
±0.25pF GRM0335C1H9R2CA01#
±0.25pF GRM0335C1H7R9CA01#
±0.5pF GRM0335C1H9R2DA01#
9.3pF
±0.5pF GRM0335C1H7R9DA01#
±0.1pF GRM0335C1H9R3BA01#
±0.25pF GRM0335C1H9R3CA01#
±0.1pF GRM0335C1H8R0BA01#
±0.5pF GRM0335C1H9R3DA01#
9.4pF
±0.1pF GRM0335C1H9R4BA01#
±0.05pF GRM0335C1H8R1WA01#
±0.25pF GRM0335C1H9R4CA01#
±0.1pF GRM0335C1H8R1BA01#
±0.5pF GRM0335C1H9R4DA01#
9.5pF
±0.5pF GRM0335C1H8R1DA01#
±0.1pF GRM0335C1H9R5BA01#
±0.25pF GRM0335C1H9R5CA01#
±0.1pF GRM0335C1H8R2BA01#
±0.5pF GRM0335C1H9R5DA01#
9.6pF
±0.1pF GRM0335C1H9R6BA01#
±0.05pF GRM0335C1H8R3WA01#
±0.25pF GRM0335C1H9R6CA01#
±0.25pF GRM0335C1H8R3CA01#
±0.5pF GRM0335C1H9R6DA01#
9.7pF
±0.5pF GRM0335C1H8R3DA01#
±0.1pF GRM0335C1H9R7BA01#
±0.25pF GRM0335C1H9R7CA01#
±0.1pF GRM0335C1H8R4BA01#
±0.5pF GRM0335C1H9R7DA01#
9.8pF
±0.5pF GRM0335C1H8R4DA01#
±0.1pF GRM0335C1H9R8BA01#
±0.25pF GRM0335C1H9R8CA01#
±0.1pF GRM0335C1H8R5BA01#
±0.5pF GRM0335C1H9R8DA01#
9.9pF
±0.5pF GRM0335C1H8R5DA01#
±0.1pF GRM0335C1H9R9BA01#
±0.25pF GRM0335C1H9R9CA01#
±0.1pF GRM0335C1H8R6BA01#
±0.5pF GRM0335C1H9R9DA01#
10pF
±0.5pF GRM0335C1H8R6DA01#
±0.05pF GRM0335C1H8R7WA01#
12pF
±0.1pF GRM0335C1H8R7BA01#
±0.25pF GRM0335C1H8R7CA01#
15pF
±0.5pF GRM0335C1H8R7DA01#
±0.05pF GRM0335C1H8R8WA01#
18pF
±0.1pF GRM0335C1H8R8BA01#
±0.25pF GRM0335C1H8R8CA01#
22pF
±0.5pF GRM0335C1H8R8DA01#
8.9pF
±0.05pF GRM0335C1H9R9WA01#
±0.05pF GRM0335C1H8R6WA01#
±0.25pF GRM0335C1H8R6CA01#
8.8pF
±0.05pF GRM0335C1H9R8WA01#
±0.05pF GRM0335C1H8R5WA01#
±0.25pF GRM0335C1H8R5CA01#
8.7pF
±0.05pF GRM0335C1H9R7WA01#
±0.05pF GRM0335C1H8R4WA01#
±0.25pF GRM0335C1H8R4CA01#
8.6pF
±0.05pF GRM0335C1H9R6WA01#
±0.5pF GRM0335C1H8R2DA01#
±0.1pF GRM0335C1H8R3BA01#
8.5pF
±0.05pF GRM0335C1H9R5WA01#
±0.05pF GRM0335C1H8R2WA01#
±0.25pF GRM0335C1H8R2CA01#
8.4pF
±0.05pF GRM0335C1H9R4WA01#
±0.5pF GRM0335C1H8R0DA01#
±0.25pF GRM0335C1H8R1CA01#
8.3pF
±0.05pF GRM0335C1H9R3WA01#
±0.05pF GRM0335C1H8R0WA01#
±0.25pF GRM0335C1H8R0CA01#
8.2pF
±0.05pF GRM0335C1H9R2WA01#
±0.5pF GRM0335C1H7R8DA01#
±0.1pF GRM0335C1H7R9BA01#
8.1pF
±0.05pF GRM0335C1H9R1WA01#
±0.05pF GRM0335C1H7R8WA01#
±0.25pF GRM0335C1H7R8CA01#
8.0pF
±0.05pF GRM0335C1H9R0WA01#
±0.05pF GRM0335C1H7R7WA01#
±0.1pF GRM0335C1H7R7BA01#
7.9pF
Part Number
±0.5pF GRM0335C1H7R6DA01#
±0.25pF GRM0335C1H7R7CA01#
7.8pF
Tol.
±0.05pF GRM0335C1H8R9WA01#
27pF
±0.1pF GRM0335C1H8R9BA01#
±0.25pF GRM0335C1H8R9CA01#
±0.5pF GRM0335C1H8R9DA01#
For General Purpose
GRM Series
0.33mm 50Vdc
Cap.
Capacitor Array
GNM Series
Rated
TC
Voltage Code
Low ESL
LLp Series
7.7pF
±0.25pF GRM0335C1H7R6CA01#
T
max.
High-Q Type
GJM Series
7.6pF
Part Number
High Frequency
GQM Series
C0G
Tol.
Monolithic Microchip
GMA Series
0.33mm 50Vdc
Cap.
33pF
±2%
GRM0335C1H100GA01#
±5%
GRM0335C1H100JA01#
±2%
GRM0335C1H120GA01#
±5%
GRM0335C1H120JA01#
±2%
GRM0335C1H150GA01#
±5%
GRM0335C1H150JA01#
±2%
GRM0335C1H180GA01#
±5%
GRM0335C1H180JA01#
±2%
GRM0335C1H220GA01#
±5%
GRM0335C1H220JA01#
±2%
GRM0335C1H270GA01#
±5%
GRM0335C1H270JA01#
±2%
GRM0335C1H330GA01#
±5%
GRM0335C1H330JA01#
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
Part number # indicates the package specification code.
31
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 0.6×0.3mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.33mm 50Vdc
C0G
Capacitor Array
GNM Series
CK
Rated
TC
Voltage Code
Tol.
39pF
±2%
GRM0335C1H390GA01#
±5%
GRM0335C1H390JA01#
±0.1pF GRM0334C1H1R8BA01#
47pF
±2%
GRM0335C1H470GA01#
±0.25pF GRM0334C1H1R8CA01#
±5%
GRM0335C1H470JA01#
56pF
±2%
GRM0335C1H560GA01#
±5%
GRM0335C1H560JA01#
68pF
±2%
GRM0335C1H680GA01#
±5%
GRM0335C1H680JA01#
±0.1pF GRM0334C1H2R0BA01#
82pF
±2%
GRM0335C1H820GA01#
±0.25pF GRM0334C1H2R0CA01#
±5%
GRM0335C1H820JA01#
±2%
GRM0335C1H101GA01#
±0.1pF GRM0333C1H2R1BA01#
±5%
GRM0335C1H101JA01#
±0.25pF GRM0333C1H2R1CA01#
100pF
0.1pF
0.2pF
Part Number
T
max.
Cap.
±0.05pF GRM0334C1HR10WA01#
Low ESL
LLp Series
0.4pF
CK
1.8pF
1.9pF
Tol.
Part Number
±0.05pF GRM0334C1H1R8WA01#
±0.05pF GRM0334C1H1R9WA01#
±0.1pF GRM0334C1H1R9BA01#
±0.25pF GRM0334C1H1R9CA01#
2.0pF
CJ
2.1pF
2.2pF
±0.05pF GRM0334C1H2R0WA01#
±0.05pF GRM0333C1H2R1WA01#
±0.05pF GRM0333C1H2R2WA01#
±0.1pF GRM0334C1HR10BA01#
±0.1pF GRM0333C1H2R2BA01#
±0.05pF GRM0334C1HR20WA01#
±0.25pF GRM0333C1H2R2CA01#
±0.1pF GRM0334C1HR20BA01#
0.3pF
0.33mm 50Vdc
Cap.
2.3pF
±0.05pF GRM0333C1H2R3WA01#
±0.05pF GRM0334C1HR30WA01#
±0.1pF GRM0333C1H2R3BA01#
±0.1pF GRM0334C1HR30BA01#
±0.25pF GRM0333C1H2R3CA01#
±0.05pF GRM0334C1HR40WA01#
2.4pF
±0.05pF GRM0333C1H2R4WA01#
±0.1pF GRM0334C1HR40BA01#
±0.1pF GRM0333C1H2R4BA01#
0.5pF
±0.05pF GRM0334C1HR50WA01#
±0.25pF GRM0333C1H2R4CA01#
0.6pF
±0.05pF GRM0334C1HR60WA01#
±0.1pF GRM0333C1H2R5BA01#
±0.1pF GRM0334C1HR60BA01#
±0.25pF GRM0333C1H2R5CA01#
±0.1pF GRM0334C1HR50BA01#
High-Q Type
GJM Series
0.7pF
±0.05pF GRM0334C1HR70WA01#
2.5pF
2.6pF
±0.1pF GRM0334C1HR70BA01#
0.8pF
High Frequency
GQM Series
0.9pF
1.0pF
1.1pF
Monolithic Microchip
GMA Series
1.2pF
1.3pF
For Bonding
GMD Series
1.4pF
1.5pF
±0.25pF GRM0333C1H2R6CA01#
2.7pF
±0.1pF GRM0333C1H2R7BA01#
±0.1pF GRM0334C1HR90BA01#
±0.25pF GRM0333C1H2R7CA01#
±0.05pF GRM0334C1H1R0WA01#
2.8pF
±0.05pF GRM0333C1H2R8WA01#
±0.1pF GRM0334C1H1R0BA01#
±0.1pF GRM0333C1H2R8BA01#
±0.25pF GRM0334C1H1R0CA01#
±0.25pF GRM0333C1H2R8CA01#
±0.05pF GRM0334C1H1R1WA01#
2.9pF
±0.05pF GRM0333C1H2R9WA01#
±0.1pF GRM0334C1H1R1BA01#
±0.1pF GRM0333C1H2R9BA01#
±0.25pF GRM0334C1H1R1CA01#
±0.25pF GRM0333C1H2R9CA01#
±0.05pF GRM0334C1H1R2WA01#
3.0pF
±0.05pF GRM0333C1H3R0WA01#
±0.1pF GRM0334C1H1R2BA01#
±0.1pF GRM0333C1H3R0BA01#
±0.25pF GRM0334C1H1R2CA01#
±0.25pF GRM0333C1H3R0CA01#
±0.05pF GRM0334C1H1R3WA01#
3.1pF
±0.05pF GRM0333C1H3R1WA01#
±0.1pF GRM0334C1H1R3BA01#
±0.1pF GRM0333C1H3R1BA01#
±0.25pF GRM0334C1H1R3CA01#
±0.25pF GRM0333C1H3R1CA01#
±0.05pF GRM0334C1H1R4WA01#
3.2pF
±0.05pF GRM0333C1H3R2WA01#
±0.1pF GRM0334C1H1R4BA01#
±0.1pF GRM0333C1H3R2BA01#
±0.25pF GRM0334C1H1R4CA01#
±0.25pF GRM0333C1H3R2CA01#
±0.05pF GRM0334C1H1R5WA01#
3.3pF
Product Information
±0.05pF GRM0334C1H1R6WA01#
±0.05pF GRM0333C1H3R3WA01#
±0.1pF GRM0333C1H3R3BA01#
±0.25pF GRM0334C1H1R5CA01#
1.7pF
±0.05pF GRM0333C1H2R7WA01#
±0.05pF GRM0334C1HR90WA01#
±0.1pF GRM0334C1H1R5BA01#
1.6pF
±0.05pF GRM0333C1H2R6WA01#
±0.1pF GRM0333C1H2R6BA01#
±0.05pF GRM0334C1HR80WA01#
±0.1pF GRM0334C1HR80BA01#
±0.05pF GRM0333C1H2R5WA01#
±0.25pF GRM0333C1H3R3CA01#
3.4pF
±0.05pF GRM0333C1H3R4WA01#
±0.1pF GRM0334C1H1R6BA01#
±0.1pF GRM0333C1H3R4BA01#
±0.25pF GRM0334C1H1R6CA01#
±0.25pF GRM0333C1H3R4CA01#
±0.05pF GRM0334C1H1R7WA01#
±0.1pF GRM0334C1H1R7BA01#
±0.25pF GRM0334C1H1R7CA01#
3.5pF
±0.05pF GRM0333C1H3R5WA01#
±0.1pF GRM0333C1H3R5BA01#
±0.25pF GRM0333C1H3R5CA01#
Part number # indicates the package specification code.
32
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 0.6×0.3mm)
CH
5.3pF
±0.1pF GRM0333C1H3R6BA01#
3.8pF
±0.05pF GRM0333C1H3R7WA01#
±0.5pF GRM0332C1H5R3DA01#
5.4pF
±0.25pF GRM0333C1H3R7CA01#
±0.25pF GRM0332C1H5R4CA01#
±0.05pF GRM0333C1H3R8WA01#
±0.5pF GRM0332C1H5R4DA01#
5.5pF
4.1pF
4.2pF
±0.25pF GRM0333C1H3R8CA01#
±0.1pF GRM0332C1H5R5BA01#
±0.25pF GRM0332C1H5R5CA01#
±0.5pF GRM0332C1H5R5DA01#
5.6pF
±0.1pF GRM0332C1H5R6BA01#
±0.1pF GRM0332C1H4R0BA01#
±0.25pF GRM0332C1H5R6CA01#
±0.25pF GRM0332C1H4R0CA01#
±0.5pF GRM0332C1H5R6DA01#
±0.05pF GRM0332C1H4R1WA01#
5.7pF
±0.1pF GRM0332C1H4R1BA01#
±0.1pF GRM0332C1H5R7BA01#
±0.25pF GRM0332C1H5R7CA01#
±0.05pF GRM0332C1H4R2WA01#
±0.5pF GRM0332C1H5R7DA01#
5.8pF
±0.1pF GRM0332C1H5R8BA01#
±0.05pF GRM0332C1H4R3WA01#
±0.25pF GRM0332C1H5R8CA01#
±0.5pF GRM0332C1H5R8DA01#
5.9pF
±0.1pF GRM0332C1H5R9BA01#
±0.1pF GRM0332C1H4R4BA01#
±0.25pF GRM0332C1H5R9CA01#
±0.05pF GRM0332C1H4R5WA01#
±0.5pF GRM0332C1H5R9DA01#
6.0pF
±0.1pF GRM0332C1H4R5BA01#
±0.1pF GRM0332C1H6R0BA01#
±0.25pF GRM0332C1H6R0CA01#
±0.05pF GRM0332C1H4R6WA01#
±0.5pF GRM0332C1H6R0DA01#
6.1pF
±0.1pF GRM0332C1H6R1BA01#
±0.05pF GRM0332C1H4R7WA01#
±0.25pF GRM0332C1H6R1CA01#
±0.1pF GRM0332C1H4R7BA01#
±0.5pF GRM0332C1H6R1DA01#
6.2pF
5.0pF
±0.1pF GRM0332C1H6R2BA01#
±0.1pF GRM0332C1H4R8BA01#
±0.25pF GRM0332C1H6R2CA01#
±0.05pF GRM0332C1H4R9WA01#
±0.1pF GRM0332C1H6R3BA01#
±0.25pF GRM0332C1H6R3CA01#
±0.05pF GRM0332C1H5R0WA01#
±0.5pF GRM0332C1H6R3DA01#
6.4pF
±0.05pF GRM0332C1H6R4WA01#
±0.25pF GRM0332C1H5R0CA01#
±0.1pF GRM0332C1H6R4BA01#
±0.05pF GRM0332C1H5R1WA01#
±0.25pF GRM0332C1H6R4CA01#
±0.1pF GRM0332C1H5R1BA01#
±0.5pF GRM0332C1H6R4DA01#
6.5pF
±0.05pF GRM0332C1H6R5WA01#
±0.5pF GRM0332C1H5R1DA01#
±0.1pF GRM0332C1H6R5BA01#
±0.05pF GRM0332C1H5R2WA01#
±0.25pF GRM0332C1H6R5CA01#
±0.1pF GRM0332C1H5R2BA01#
±0.25pF GRM0332C1H5R2CA01#
±0.5pF GRM0332C1H5R2DA01#
5.3pF
±0.05pF GRM0332C1H6R3WA01#
±0.1pF GRM0332C1H4R9BA01#
±0.25pF GRM0332C1H5R1CA01#
5.2pF
±0.5pF GRM0332C1H6R2DA01#
6.3pF
±0.25pF GRM0332C1H4R9CA01#
±0.1pF GRM0332C1H5R0BA01#
5.1pF
±0.05pF GRM0332C1H6R2WA01#
±0.05pF GRM0332C1H4R8WA01#
±0.25pF GRM0332C1H4R8CA01#
4.9pF
±0.05pF GRM0332C1H6R1WA01#
±0.25pF GRM0332C1H4R6CA01#
±0.25pF GRM0332C1H4R7CA01#
4.8pF
±0.05pF GRM0332C1H6R0WA01#
±0.25pF GRM0332C1H4R5CA01#
±0.1pF GRM0332C1H4R6BA01#
4.7pF
±0.05pF GRM0332C1H5R9WA01#
±0.05pF GRM0332C1H4R4WA01#
±0.25pF GRM0332C1H4R4CA01#
4.6pF
±0.05pF GRM0332C1H5R8WA01#
±0.25pF GRM0332C1H4R2CA01#
±0.25pF GRM0332C1H4R3CA01#
4.5pF
±0.05pF GRM0332C1H5R7WA01#
±0.25pF GRM0332C1H4R1CA01#
±0.1pF GRM0332C1H4R3BA01#
4.4pF
±0.05pF GRM0332C1H5R6WA01#
±0.05pF GRM0332C1H4R0WA01#
±0.1pF GRM0332C1H4R2BA01#
4.3pF
±0.05pF GRM0332C1H5R5WA01#
±0.05pF GRM0333C1H3R9WA01#
±0.1pF GRM0333C1H3R9BA01#
4.0pF
±0.05pF GRM0332C1H5R4WA01#
±0.1pF GRM0332C1H5R4BA01#
±0.25pF GRM0333C1H3R9CA01#
CH
±0.1pF GRM0332C1H5R3BA01#
±0.1pF GRM0333C1H3R7BA01#
±0.1pF GRM0333C1H3R8BA01#
3.9pF
Part Number
±0.25pF GRM0332C1H5R3CA01#
±0.25pF GRM0333C1H3R6CA01#
3.7pF
Tol.
±0.05pF GRM0332C1H5R3WA01#
For General Purpose
GRM Series
0.33mm 50Vdc
Cap.
Capacitor Array
GNM Series
Rated
TC
Voltage Code
Low ESL
LLp Series
±0.05pF GRM0333C1H3R6WA01#
T
max.
High-Q Type
GJM Series
3.6pF
Part Number
High Frequency
GQM Series
CJ
Tol.
Monolithic Microchip
GMA Series
0.33mm 50Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
±0.5pF GRM0332C1H6R5DA01#
6.6pF
±0.05pF GRM0332C1H6R6WA01#
±0.1pF GRM0332C1H6R6BA01#
±0.25pF GRM0332C1H6R6CA01#
Part number # indicates the package specification code.
33
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 0.6×0.3mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.33mm 50Vdc
CH
Cap.
Tol.
Part Number
6.6pF
±0.5pF GRM0332C1H6R6DA01#
6.7pF
±0.05pF GRM0332C1H6R7WA01#
T
max.
Rated
TC
Voltage Code
0.33mm 50Vdc
CH
Cap.
8.0pF
6.8pF
±0.1pF GRM0332C1H8R1BA01#
±0.05pF GRM0332C1H6R8WA01#
±0.25pF GRM0332C1H8R1CA01#
±0.5pF GRM0332C1H8R1DA01#
8.2pF
Capacitor Array
GNM Series
±0.5pF GRM0332C1H6R8DA01#
±0.1pF GRM0332C1H8R2BA01#
±0.25pF GRM0332C1H8R2CA01#
±0.1pF GRM0332C1H6R9BA01#
±0.5pF GRM0332C1H8R2DA01#
8.3pF
±0.5pF GRM0332C1H6R9DA01#
±0.1pF GRM0332C1H8R3BA01#
±0.25pF GRM0332C1H8R3CA01#
±0.1pF GRM0332C1H7R0BA01#
±0.5pF GRM0332C1H8R3DA01#
Low ESL
LLp Series
8.4pF
±0.5pF GRM0332C1H7R0DA01#
±0.1pF GRM0332C1H8R4BA01#
±0.25pF GRM0332C1H8R4CA01#
±0.1pF GRM0332C1H7R1BA01#
±0.5pF GRM0332C1H8R4DA01#
8.5pF
±0.1pF GRM0332C1H8R5BA01#
±0.05pF GRM0332C1H7R2WA01#
±0.25pF GRM0332C1H8R5CA01#
High-Q Type
GJM Series
±0.25pF GRM0332C1H7R2CA01#
±0.5pF GRM0332C1H8R5DA01#
8.6pF
±0.5pF GRM0332C1H7R2DA01#
±0.1pF GRM0332C1H8R6BA01#
±0.25pF GRM0332C1H8R6CA01#
±0.1pF GRM0332C1H7R3BA01#
±0.5pF GRM0332C1H8R6DA01#
8.7pF
High Frequency
GQM Series
±0.5pF GRM0332C1H7R3DA01#
±0.1pF GRM0332C1H8R7BA01#
±0.25pF GRM0332C1H8R7CA01#
±0.1pF GRM0332C1H7R4BA01#
±0.5pF GRM0332C1H8R7DA01#
8.8pF
±0.1pF GRM0332C1H8R8BA01#
±0.05pF GRM0332C1H7R5WA01#
±0.25pF GRM0332C1H8R8CA01#
Monolithic Microchip
GMA Series
±0.1pF GRM0332C1H7R5BA01#
±0.5pF GRM0332C1H8R8DA01#
8.9pF
±0.1pF GRM0332C1H8R9BA01#
±0.05pF GRM0332C1H7R6WA01#
±0.25pF GRM0332C1H8R9CA01#
±0.25pF GRM0332C1H7R6CA01#
±0.5pF GRM0332C1H8R9DA01#
9.0pF
±0.5pF GRM0332C1H7R6DA01#
±0.1pF GRM0332C1H9R0BA01#
±0.25pF GRM0332C1H9R0CA01#
For Bonding
GMD Series
±0.1pF GRM0332C1H7R7BA01#
±0.5pF GRM0332C1H9R0DA01#
9.1pF
±0.05pF GRM0332C1H9R1WA01#
±0.5pF GRM0332C1H7R7DA01#
±0.1pF GRM0332C1H9R1BA01#
±0.05pF GRM0332C1H7R8WA01#
±0.25pF GRM0332C1H9R1CA01#
±0.1pF GRM0332C1H7R8BA01#
±0.5pF GRM0332C1H9R1DA01#
±0.25pF GRM0332C1H7R8CA01#
9.2pF
±0.05pF GRM0332C1H9R2WA01#
Product Information
±0.5pF GRM0332C1H7R8DA01#
±0.1pF GRM0332C1H9R2BA01#
±0.05pF GRM0332C1H7R9WA01#
±0.25pF GRM0332C1H9R2CA01#
±0.1pF GRM0332C1H7R9BA01#
±0.25pF GRM0332C1H7R9CA01#
±0.5pF GRM0332C1H7R9DA01#
8.0pF
±0.05pF GRM0332C1H9R0WA01#
±0.05pF GRM0332C1H7R7WA01#
±0.25pF GRM0332C1H7R7CA01#
7.9pF
±0.05pF GRM0332C1H8R9WA01#
±0.5pF GRM0332C1H7R5DA01#
±0.1pF GRM0332C1H7R6BA01#
7.8pF
±0.05pF GRM0332C1H8R8WA01#
±0.5pF GRM0332C1H7R4DA01#
±0.25pF GRM0332C1H7R5CA01#
7.7pF
±0.05pF GRM0332C1H8R7WA01#
±0.05pF GRM0332C1H7R4WA01#
±0.25pF GRM0332C1H7R4CA01#
7.6pF
±0.05pF GRM0332C1H8R6WA01#
±0.05pF GRM0332C1H7R3WA01#
±0.25pF GRM0332C1H7R3CA01#
7.5pF
±0.05pF GRM0332C1H8R5WA01#
±0.5pF GRM0332C1H7R1DA01#
±0.1pF GRM0332C1H7R2BA01#
7.4pF
±0.05pF GRM0332C1H8R4WA01#
±0.05pF GRM0332C1H7R1WA01#
±0.25pF GRM0332C1H7R1CA01#
7.3pF
±0.05pF GRM0332C1H8R3WA01#
±0.05pF GRM0332C1H7R0WA01#
±0.25pF GRM0332C1H7R0CA01#
7.2pF
±0.05pF GRM0332C1H8R2WA01#
±0.05pF GRM0332C1H6R9WA01#
±0.25pF GRM0332C1H6R9CA01#
7.1pF
±0.05pF GRM0332C1H8R1WA01#
±0.5pF GRM0332C1H6R7DA01#
±0.25pF GRM0332C1H6R8CA01#
7.0pF
±0.1pF GRM0332C1H8R0BA01#
±0.5pF GRM0332C1H8R0DA01#
8.1pF
±0.1pF GRM0332C1H6R8BA01#
6.9pF
Part Number
±0.25pF GRM0332C1H8R0CA01#
±0.1pF GRM0332C1H6R7BA01#
±0.25pF GRM0332C1H6R7CA01#
Tol.
±0.05pF GRM0332C1H8R0WA01#
±0.5pF GRM0332C1H9R2DA01#
9.3pF
±0.05pF GRM0332C1H9R3WA01#
±0.1pF GRM0332C1H9R3BA01#
±0.25pF GRM0332C1H9R3CA01#
Part number # indicates the package specification code.
34
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 0.6×0.3mm)
±0.5pF GRM0332C1H9R3DA01#
4.0pF
±0.25pF GRM0333U1H4R0CD01#
±0.05pF GRM0332C1H9R4WA01#
5.0pF
±0.25pF GRM0333U1H5R0CD01#
±0.1pF GRM0332C1H9R4BA01#
6.0pF
±0.5pF GRM0333U1H6R0DD01#
±0.25pF GRM0332C1H9R4CA01#
7.0pF
±0.5pF GRM0333U1H7R0DD01#
±0.5pF GRM0332C1H9R4DA01#
8.0pF
±0.5pF GRM0333U1H8R0DD01#
±0.05pF GRM0332C1H9R5WA01#
9.0pF
±0.5pF GRM0333U1H9R0DD01#
±0.1pF GRM0332C1H9R5BA01#
10pF
±5%
GRM0333U1H100JD01#
±0.25pF GRM0332C1H9R5CA01#
12pF
±5%
GRM0333U1H120JD01#
±0.5pF GRM0332C1H9R5DA01#
15pF
±5%
GRM0333U1H150JD01#
9.7pF
9.8pF
9.9pF
±0.05pF GRM0332C1H9R6WA01#
0.33mm 50Vdc
25Vdc
UJ
R2H
1.0pF
±0.25pF GRM0336R1E1R0CD01#
±0.1pF GRM0332C1H9R6BA01#
2.0pF
±0.25pF GRM0336R1E2R0CD01#
±0.25pF GRM0332C1H9R6CA01#
3.0pF
±0.25pF GRM0336R1E3R0CD01#
±0.5pF GRM0332C1H9R6DA01#
4.0pF
±0.25pF GRM0336R1E4R0CD01#
±0.05pF GRM0332C1H9R7WA01#
5.0pF
±0.25pF GRM0336R1E5R0CD01#
±0.1pF GRM0332C1H9R7BA01#
6.0pF
±0.5pF GRM0336R1E6R0DD01#
±0.25pF GRM0332C1H9R7CA01#
7.0pF
±0.5pF GRM0336R1E7R0DD01#
±0.5pF GRM0332C1H9R7DA01#
8.0pF
±0.5pF GRM0336R1E8R0DD01#
±0.05pF GRM0332C1H9R8WA01#
9.0pF
±0.5pF GRM0336R1E9R0DD01#
±0.1pF GRM0332C1H9R8BA01#
10pF
±5%
GRM0336R1E100JD01#
±0.25pF GRM0332C1H9R8CA01#
12pF
±5%
GRM0336R1E120JD01#
±0.5pF GRM0332C1H9R8DA01#
15pF
±5%
GRM0336R1E150JD01#
±0.05pF GRM0332C1H9R9WA01#
18pF
±5%
GRM0336R1E180JD01#
±0.1pF GRM0332C1H9R9BA01#
22pF
±5%
GRM0336R1E220JD01#
±0.25pF GRM0332C1H9R9CA01#
27pF
±5%
GRM0336R1E270JD01#
±0.5pF GRM0332C1H9R9DA01#
33pF
±5%
GRM0336R1E330JD01#
10pF
±2%
GRM0332C1H100GA01#
39pF
±5%
GRM0336R1E390JD01#
±5%
GRM0332C1H100JA01#
47pF
±5%
GRM0336R1E470JD01#
12pF
±2%
GRM0332C1H120GA01#
56pF
±5%
GRM0336R1E560JD01#
±5%
GRM0332C1H120JA01#
68pF
±5%
GRM0336R1E680JD01#
±2%
GRM0332C1H150GA01#
82pF
±5%
GRM0336R1E820JD01#
±5%
GRM0332C1H150JA01#
100pF
±5%
GRM0336R1E101JD01#
±2%
GRM0332C1H180GA01#
±5%
GRM0332C1H180JA01#
±2%
GRM0332C1H220GA01#
RJ
3.0pF
±0.25pF GRM0333R1E3R0CD01#
±5%
GRM0332C1H220JA01#
RH
4.0pF
±0.25pF GRM0332R1E4R0CD01#
±2%
GRM0332C1H270GA01#
5.0pF
±0.25pF GRM0332R1E5R0CD01#
±5%
GRM0332C1H270JA01#
6.0pF
±0.5pF GRM0332R1E6R0DD01#
±2%
GRM0332C1H330GA01#
7.0pF
±0.5pF GRM0332R1E7R0DD01#
±5%
GRM0332C1H330JA01#
8.0pF
±0.5pF GRM0332R1E8R0DD01#
±2%
GRM0332C1H390GA01#
9.0pF
±0.5pF GRM0332R1E9R0DD01#
±5%
GRM0332C1H390JA01#
10pF
±5%
GRM0332R1E100JD01#
47pF
±2%
GRM0332C1H470GA01#
12pF
±5%
GRM0332R1E120JD01#
±5%
GRM0332C1H470JA01#
15pF
±5%
GRM0332R1E150JD01#
56pF
±2%
GRM0332C1H560GA01#
18pF
±5%
GRM0332R1E180JD01#
±5%
GRM0332C1H560JA01#
22pF
±5%
GRM0332R1E220JD01#
±2%
GRM0332C1H680GA01#
27pF
±5%
GRM0332R1E270JD01#
±5%
GRM0332C1H680JA01#
33pF
±5%
GRM0332R1E330JD01#
±2%
GRM0332C1H820GA01#
39pF
±5%
GRM0332R1E390JD01#
±5%
GRM0332C1H820JA01#
47pF
±5%
GRM0332R1E470JD01#
±2%
GRM0332C1H101GA01#
56pF
±5%
GRM0332R1E560JD01#
±5%
GRM0332C1H101JA01#
68pF
±5%
GRM0332R1E680JD01#
15pF
18pF
22pF
27pF
33pF
39pF
68pF
82pF
100pF
RK
1.0pF
±0.25pF GRM0334R1E1R0CD01#
2.0pF
±0.25pF GRM0334R1E2R0CD01#
1.0pF
±0.25pF GRM0334U1H1R0CD01#
82pF
±5%
GRM0332R1E820JD01#
2.0pF
±0.25pF GRM0334U1H2R0CD01#
100pF
±5%
GRM0332R1E101JD01#
3.0pF
±0.25pF GRM0333U1H3R0CD01#
S2H
1.0pF
For General Purpose
GRM Series
Part Number
Capacitor Array
GNM Series
Tol.
Low ESL
LLp Series
Cap.
High-Q Type
GJM Series
Rated
TC
Voltage Code
9.4pF
9.6pF
UJ
T
max.
9.3pF
9.5pF
UK
Part Number
High Frequency
GQM Series
CH
Tol.
Monolithic Microchip
GMA Series
0.33mm 50Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
±0.25pF GRM0336S1E1R0CD01#
Part number # indicates the package specification code.
35
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 0.6×0.3mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.33mm 25Vdc
S2H
Cap.
Tol.
Part Number
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
2.0pF
±0.25pF GRM0336S1E2R0CD01#
15pF
±5%
GRM0336T1E150JD01#
3.0pF
±0.25pF GRM0336S1E3R0CD01#
18pF
±5%
GRM0336T1E180JD01#
4.0pF
±0.25pF GRM0336S1E4R0CD01#
22pF
±5%
GRM0336T1E220JD01#
5.0pF
±0.25pF GRM0336S1E5R0CD01#
27pF
±5%
GRM0336T1E270JD01#
6.0pF
±0.5pF GRM0336S1E6R0DD01#
33pF
±5%
GRM0336T1E330JD01#
7.0pF
±0.5pF GRM0336S1E7R0DD01#
39pF
±5%
GRM0336T1E390JD01#
8.0pF
±0.5pF GRM0336S1E8R0DD01#
47pF
±5%
GRM0336T1E470JD01#
9.0pF
±0.5pF GRM0336S1E9R0DD01#
56pF
±5%
GRM0336T1E560JD01#
0.33mm 25Vdc
T2H
Capacitor Array
GNM Series
Low ESL
LLp Series
10pF
±5%
GRM0336S1E100JD01#
68pF
±5%
GRM0336T1E680JD01#
12pF
±5%
GRM0336S1E120JD01#
82pF
±5%
GRM0336T1E820JD01#
15pF
±5%
GRM0336S1E150JD01#
±5%
GRM0336T1E101JD01#
18pF
±5%
GRM0336S1E180JD01#
22pF
±5%
GRM0336S1E220JD01#
27pF
±5%
GRM0336S1E270JD01#
TJ
33pF
±5%
GRM0336S1E330JD01#
TH
39pF
100pF
1.0pF
±0.25pF GRM0334T1E1R0CD01#
2.0pF
±0.25pF GRM0334T1E2R0CD01#
3.0pF
±0.25pF GRM0333T1E3R0CD01#
4.0pF
±0.25pF GRM0332T1E4R0CD01#
±5%
GRM0336S1E390JD01#
5.0pF
±0.25pF GRM0332T1E5R0CD01#
47pF
±5%
GRM0336S1E470JD01#
6.0pF
±0.5pF GRM0332T1E6R0DD01#
56pF
±5%
GRM0336S1E560JD01#
7.0pF
±0.5pF GRM0332T1E7R0DD01#
68pF
±5%
GRM0336S1E680JD01#
8.0pF
±0.5pF GRM0332T1E8R0DD01#
82pF
±5%
GRM0336S1E820JD01#
9.0pF
±0.5pF GRM0332T1E9R0DD01#
100pF
±5%
GRM0336S1E101JD01#
10pF
±5%
GRM0332T1E100JD01#
TK
1.0pF
±0.25pF GRM0334S1E1R0CD01#
12pF
±5%
GRM0332T1E120JD01#
2.0pF
±0.25pF GRM0334S1E2R0CD01#
15pF
±5%
GRM0332T1E150JD01#
SJ
3.0pF
±0.25pF GRM0333S1E3R0CD01#
18pF
±5%
GRM0332T1E180JD01#
SH
4.0pF
±0.25pF GRM0332S1E4R0CD01#
22pF
±5%
GRM0332T1E220JD01#
5.0pF
±0.25pF GRM0332S1E5R0CD01#
27pF
±5%
GRM0332T1E270JD01#
6.0pF
±0.5pF GRM0332S1E6R0DD01#
33pF
±5%
GRM0332T1E330JD01#
7.0pF
±0.5pF GRM0332S1E7R0DD01#
39pF
±5%
GRM0332T1E390JD01#
8.0pF
±0.5pF GRM0332S1E8R0DD01#
47pF
±5%
GRM0332T1E470JD01#
9.0pF
±0.5pF GRM0332S1E9R0DD01#
56pF
±5%
GRM0332T1E560JD01#
68pF
±5%
GRM0332T1E680JD01#
SK
High-Q Type
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
10pF
±5%
GRM0332S1E100JD01#
12pF
±5%
GRM0332S1E120JD01#
82pF
±5%
GRM0332T1E820JD01#
15pF
±5%
GRM0332S1E150JD01#
100pF
±5%
GRM0332T1E101JD01#
18pF
±5%
GRM0332S1E180JD01#
18pF
±5%
GRM0333U1E180JD01#
22pF
±5%
GRM0332S1E220JD01#
22pF
±5%
GRM0333U1E220JD01#
27pF
±5%
GRM0332S1E270JD01#
27pF
±5%
GRM0333U1E270JD01#
33pF
±5%
GRM0332S1E330JD01#
33pF
±5%
GRM0333U1E330JD01#
39pF
±5%
GRM0332S1E390JD01#
39pF
±5%
GRM0333U1E390JD01#
47pF
±5%
GRM0332S1E470JD01#
47pF
±5%
GRM0333U1E470JD01#
56pF
±5%
GRM0332S1E560JD01#
56pF
±5%
GRM0333U1E560JD01#
68pF
±5%
GRM0332S1E680JD01#
68pF
±5%
GRM0333U1E680JD01#
82pF
±5%
GRM0332S1E820JD01#
82pF
±5%
GRM0333U1E820JD01#
±5%
GRM0332S1E101JD01#
100pF
±5%
GRM0333U1E101JD01#
Cap.
Tol.
For Bonding
GMD Series
100pF
T2H
1.0pF
±0.25pF GRM0336T1E1R0CD01#
2.0pF
±0.25pF GRM0336T1E2R0CD01#
3.0pF
±0.25pF GRM0336T1E3R0CD01#
4.0pF
±0.25pF GRM0336T1E4R0CD01#
5.0pF
±0.25pF GRM0336T1E5R0CD01#
UJ
c 1.0×0.5mm
T
max.
Rated
TC
Voltage Code
Part Number
Product Information
6.0pF
±0.5pF GRM0336T1E6R0DD01#
0.1pF
±0.1pF GRM1535C1HR10BDD5#
7.0pF
±0.5pF GRM0336T1E7R0DD01#
0.2pF
±0.1pF GRM1535C1HR20BDD5#
8.0pF
±0.5pF GRM0336T1E8R0DD01#
0.3pF
±0.1pF GRM1535C1HR30BDD5#
9.0pF
±0.5pF GRM0336T1E9R0DD01#
0.4pF
±0.1pF GRM1535C1HR40BDD5#
0.33mm 50Vdc
C0G
10pF
±5%
GRM0336T1E100JD01#
0.5pF
±0.1pF GRM1535C1HR50BDD5#
12pF
±5%
GRM0336T1E120JD01#
0.6pF
±0.1pF GRM1535C1HR60BDD5#
Part number # indicates the package specification code.
36
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.0×0.5mm)
Tol.
Part Number
0.7pF
±0.1pF GRM1535C1HR70BDD5#
6.1pF
±0.5pF GRM1535C1H6R1DDD5#
0.8pF
±0.1pF GRM1535C1HR80BDD5#
6.2pF
±0.5pF GRM1535C1H6R2DDD5#
0.9pF
±0.1pF GRM1535C1HR90BDD5#
6.3pF
±0.5pF GRM1535C1H6R3DDD5#
1.0pF
±0.25pF GRM1535C1H1R0CDD5#
6.4pF
±0.5pF GRM1535C1H6R4DDD5#
1.1pF
±0.25pF GRM1535C1H1R1CDD5#
6.5pF
±0.5pF GRM1535C1H6R5DDD5#
1.2pF
±0.25pF GRM1535C1H1R2CDD5#
6.6pF
±0.5pF GRM1535C1H6R6DDD5#
1.3pF
±0.25pF GRM1535C1H1R3CDD5#
6.7pF
±0.5pF GRM1535C1H6R7DDD5#
1.4pF
±0.25pF GRM1535C1H1R4CDD5#
6.8pF
±0.5pF GRM1535C1H6R8DDD5#
1.5pF
±0.25pF GRM1535C1H1R5CDD5#
6.9pF
±0.5pF GRM1535C1H6R9DDD5#
1.6pF
±0.25pF GRM1535C1H1R6CDD5#
7.0pF
±0.5pF GRM1535C1H7R0DDD5#
1.7pF
±0.25pF GRM1535C1H1R7CDD5#
7.1pF
±0.5pF GRM1535C1H7R1DDD5#
1.8pF
±0.25pF GRM1535C1H1R8CDD5#
7.2pF
±0.5pF GRM1535C1H7R2DDD5#
1.9pF
±0.25pF GRM1535C1H1R9CDD5#
7.3pF
±0.5pF GRM1535C1H7R3DDD5#
2.0pF
±0.25pF GRM1535C1H2R0CDD5#
7.4pF
±0.5pF GRM1535C1H7R4DDD5#
2.1pF
±0.25pF GRM1535C1H2R1CDD5#
7.5pF
±0.5pF GRM1535C1H7R5DDD5#
2.2pF
±0.25pF GRM1535C1H2R2CDD5#
7.6pF
±0.5pF GRM1535C1H7R6DDD5#
2.3pF
±0.25pF GRM1535C1H2R3CDD5#
7.7pF
±0.5pF GRM1535C1H7R7DDD5#
2.4pF
±0.25pF GRM1535C1H2R4CDD5#
7.8pF
±0.5pF GRM1535C1H7R8DDD5#
2.5pF
±0.25pF GRM1535C1H2R5CDD5#
7.9pF
±0.5pF GRM1535C1H7R9DDD5#
2.6pF
±0.25pF GRM1535C1H2R6CDD5#
8.0pF
±0.5pF GRM1535C1H8R0DDD5#
2.7pF
±0.25pF GRM1535C1H2R7CDD5#
8.1pF
±0.5pF GRM1535C1H8R1DDD5#
2.8pF
±0.25pF GRM1535C1H2R8CDD5#
8.2pF
±0.5pF GRM1535C1H8R2DDD5#
2.9pF
±0.25pF GRM1535C1H2R9CDD5#
8.3pF
±0.5pF GRM1535C1H8R3DDD5#
3.0pF
±0.25pF GRM1535C1H3R0CDD5#
8.4pF
±0.5pF GRM1535C1H8R4DDD5#
3.1pF
±0.25pF GRM1535C1H3R1CDD5#
8.5pF
±0.5pF GRM1535C1H8R5DDD5#
3.2pF
±0.25pF GRM1535C1H3R2CDD5#
8.6pF
±0.5pF GRM1535C1H8R6DDD5#
3.3pF
±0.25pF GRM1535C1H3R3CDD5#
8.7pF
±0.5pF GRM1535C1H8R7DDD5#
3.4pF
±0.25pF GRM1535C1H3R4CDD5#
8.8pF
±0.5pF GRM1535C1H8R8DDD5#
3.5pF
±0.25pF GRM1535C1H3R5CDD5#
8.9pF
±0.5pF GRM1535C1H8R9DDD5#
3.6pF
±0.25pF GRM1535C1H3R6CDD5#
9.0pF
±0.5pF GRM1535C1H9R0DDD5#
3.7pF
±0.25pF GRM1535C1H3R7CDD5#
9.1pF
±0.5pF GRM1535C1H9R1DDD5#
3.8pF
±0.25pF GRM1535C1H3R8CDD5#
9.2pF
±0.5pF GRM1535C1H9R2DDD5#
3.9pF
±0.25pF GRM1535C1H3R9CDD5#
9.3pF
±0.5pF GRM1535C1H9R3DDD5#
4.0pF
±0.25pF GRM1535C1H4R0CDD5#
9.4pF
±0.5pF GRM1535C1H9R4DDD5#
4.1pF
±0.25pF GRM1535C1H4R1CDD5#
9.5pF
±0.5pF GRM1535C1H9R5DDD5#
4.2pF
±0.25pF GRM1535C1H4R2CDD5#
9.6pF
±0.5pF GRM1535C1H9R6DDD5#
4.3pF
±0.25pF GRM1535C1H4R3CDD5#
9.7pF
±0.5pF GRM1535C1H9R7DDD5#
4.4pF
±0.25pF GRM1535C1H4R4CDD5#
9.8pF
±0.5pF GRM1535C1H9R8DDD5#
4.5pF
±0.25pF GRM1535C1H4R5CDD5#
9.9pF
±0.5pF GRM1535C1H9R9DDD5#
4.6pF
±0.25pF GRM1535C1H4R6CDD5#
10pF
±5%
GRM1535C1H100JDD5#
4.7pF
±0.25pF GRM1535C1H4R7CDD5#
12pF
±5%
GRM1535C1H120JDD5#
4.8pF
±0.25pF GRM1535C1H4R8CDD5#
15pF
±5%
GRM1535C1H150JDD5#
4.9pF
±0.25pF GRM1535C1H4R9CDD5#
18pF
±5%
GRM1535C1H180JDD5#
5.0pF
±0.25pF GRM1535C1H5R0CDD5#
22pF
±5%
GRM1535C1H220JDD5#
5.1pF
±0.5pF GRM1535C1H5R1DDD5#
27pF
±5%
GRM1535C1H270JDD5#
5.2pF
±0.5pF GRM1535C1H5R2DDD5#
33pF
±5%
GRM1535C1H330JDD5#
5.3pF
±0.5pF GRM1535C1H5R3DDD5#
39pF
±5%
GRM1535C1H390JDD5#
5.4pF
±0.5pF GRM1535C1H5R4DDD5#
47pF
±5%
GRM1535C1H470JDD5#
5.5pF
±0.5pF GRM1535C1H5R5DDD5#
56pF
±5%
GRM1535C1H560JDD5#
5.6pF
±0.5pF GRM1535C1H5R6DDD5#
68pF
±5%
GRM1535C1H680JDD5#
5.7pF
±0.5pF GRM1535C1H5R7DDD5#
82pF
±5%
GRM1535C1H820JDD5#
5.8pF
±0.5pF GRM1535C1H5R8DDD5#
100pF
±5%
GRM1535C1H101JDD5#
5.9pF
±0.5pF GRM1535C1H5R9DDD5#
120pF
±5%
GRM1535C1H121JDD5#
6.0pF
±0.5pF GRM1535C1H6R0DDD5#
150pF
±5%
GRM1535C1H151JDD5#
0.33mm 50Vdc
C0G
For General Purpose
GRM Series
Cap.
Capacitor Array
GNM Series
Rated
TC
Voltage Code
Low ESL
LLp Series
T
max.
High-Q Type
GJM Series
Part Number
High Frequency
GQM Series
C0G
Tol.
Monolithic Microchip
GMA Series
0.33mm 50Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
Part number # indicates the package specification code.
37
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.0×0.5mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.33mm 50Vdc
C0G
Capacitor Array
GNM Series
CK
Low ESL
LLp Series
High-Q Type
GJM Series
High Frequency
GQM Series
CJ
Monolithic Microchip
GMA Series
For Bonding
GMD Series
CH
Part Number
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
180pF
±5%
GRM1535C1H181JDD5#
4.7pF
±0.25pF GRM1532C1H4R7CDD5#
220pF
±5%
GRM1535C1H221JDD5#
4.8pF
±0.25pF GRM1532C1H4R8CDD5#
270pF
±5%
GRM1535C1H271JDD5#
4.9pF
±0.25pF GRM1532C1H4R9CDD5#
330pF
±5%
GRM1535C1H331JDD5#
5.0pF
±0.25pF GRM1532C1H5R0CDD5#
390pF
±5%
GRM1535C1H391JDD5#
5.1pF
±0.5pF GRM1532C1H5R1DDD5#
470pF
±5%
GRM1535C1H471JDD5#
5.2pF
±0.5pF GRM1532C1H5R2DDD5#
560pF
±5%
GRM1535C1H561JDD5#
5.3pF
±0.5pF GRM1532C1H5R3DDD5#
680pF
±5%
GRM1535C1H681JDD5#
5.4pF
±0.5pF GRM1532C1H5R4DDD5#
0.33mm 50Vdc
CH
Cap.
Tol.
Part Number
Product Information
0.1pF
±0.1pF GRM1534C1HR10BDD5#
5.5pF
±0.5pF GRM1532C1H5R5DDD5#
0.2pF
±0.1pF GRM1534C1HR20BDD5#
5.6pF
±0.5pF GRM1532C1H5R6DDD5#
0.3pF
±0.1pF GRM1534C1HR30BDD5#
5.7pF
±0.5pF GRM1532C1H5R7DDD5#
0.4pF
±0.1pF GRM1534C1HR40BDD5#
5.8pF
±0.5pF GRM1532C1H5R8DDD5#
0.5pF
±0.1pF GRM1534C1HR50BDD5#
5.9pF
±0.5pF GRM1532C1H5R9DDD5#
0.6pF
±0.1pF GRM1534C1HR60BDD5#
6.0pF
±0.5pF GRM1532C1H6R0DDD5#
0.7pF
±0.1pF GRM1534C1HR70BDD5#
6.1pF
±0.5pF GRM1532C1H6R1DDD5#
0.8pF
±0.1pF GRM1534C1HR80BDD5#
6.2pF
±0.5pF GRM1532C1H6R2DDD5#
0.9pF
±0.1pF GRM1534C1HR90BDD5#
6.3pF
±0.5pF GRM1532C1H6R3DDD5#
1.0pF
±0.25pF GRM1534C1H1R0CDD5#
6.4pF
±0.5pF GRM1532C1H6R4DDD5#
1.1pF
±0.25pF GRM1534C1H1R1CDD5#
6.5pF
±0.5pF GRM1532C1H6R5DDD5#
1.2pF
±0.25pF GRM1534C1H1R2CDD5#
6.6pF
±0.5pF GRM1532C1H6R6DDD5#
1.3pF
±0.25pF GRM1534C1H1R3CDD5#
6.7pF
±0.5pF GRM1532C1H6R7DDD5#
1.4pF
±0.25pF GRM1534C1H1R4CDD5#
6.8pF
±0.5pF GRM1532C1H6R8DDD5#
1.5pF
±0.25pF GRM1534C1H1R5CDD5#
6.9pF
±0.5pF GRM1532C1H6R9DDD5#
1.6pF
±0.25pF GRM1534C1H1R6CDD5#
7.0pF
±0.5pF GRM1532C1H7R0DDD5#
1.7pF
±0.25pF GRM1534C1H1R7CDD5#
7.1pF
±0.5pF GRM1532C1H7R1DDD5#
1.8pF
±0.25pF GRM1534C1H1R8CDD5#
7.2pF
±0.5pF GRM1532C1H7R2DDD5#
1.9pF
±0.25pF GRM1534C1H1R9CDD5#
7.3pF
±0.5pF GRM1532C1H7R3DDD5#
2.0pF
±0.25pF GRM1534C1H2R0CDD5#
7.4pF
±0.5pF GRM1532C1H7R4DDD5#
2.1pF
±0.25pF GRM1533C1H2R1CDD5#
7.5pF
±0.5pF GRM1532C1H7R5DDD5#
2.2pF
±0.25pF GRM1533C1H2R2CDD5#
7.6pF
±0.5pF GRM1532C1H7R6DDD5#
2.3pF
±0.25pF GRM1533C1H2R3CDD5#
7.7pF
±0.5pF GRM1532C1H7R7DDD5#
2.4pF
±0.25pF GRM1533C1H2R4CDD5#
7.8pF
±0.5pF GRM1532C1H7R8DDD5#
2.5pF
±0.25pF GRM1533C1H2R5CDD5#
7.9pF
±0.5pF GRM1532C1H7R9DDD5#
2.6pF
±0.25pF GRM1533C1H2R6CDD5#
8.0pF
±0.5pF GRM1532C1H8R0DDD5#
2.7pF
±0.25pF GRM1533C1H2R7CDD5#
8.1pF
±0.5pF GRM1532C1H8R1DDD5#
2.8pF
±0.25pF GRM1533C1H2R8CDD5#
8.2pF
±0.5pF GRM1532C1H8R2DDD5#
2.9pF
±0.25pF GRM1533C1H2R9CDD5#
8.3pF
±0.5pF GRM1532C1H8R3DDD5#
3.0pF
±0.25pF GRM1533C1H3R0CDD5#
8.4pF
±0.5pF GRM1532C1H8R4DDD5#
3.1pF
±0.25pF GRM1533C1H3R1CDD5#
8.5pF
±0.5pF GRM1532C1H8R5DDD5#
3.2pF
±0.25pF GRM1533C1H3R2CDD5#
8.6pF
±0.5pF GRM1532C1H8R6DDD5#
3.3pF
±0.25pF GRM1533C1H3R3CDD5#
8.7pF
±0.5pF GRM1532C1H8R7DDD5#
3.4pF
±0.25pF GRM1533C1H3R4CDD5#
8.8pF
±0.5pF GRM1532C1H8R8DDD5#
3.5pF
±0.25pF GRM1533C1H3R5CDD5#
8.9pF
±0.5pF GRM1532C1H8R9DDD5#
3.6pF
±0.25pF GRM1533C1H3R6CDD5#
9.0pF
±0.5pF GRM1532C1H9R0DDD5#
3.7pF
±0.25pF GRM1533C1H3R7CDD5#
9.1pF
±0.5pF GRM1532C1H9R1DDD5#
3.8pF
±0.25pF GRM1533C1H3R8CDD5#
9.2pF
±0.5pF GRM1532C1H9R2DDD5#
3.9pF
±0.25pF GRM1533C1H3R9CDD5#
9.3pF
±0.5pF GRM1532C1H9R3DDD5#
4.0pF
±0.25pF GRM1532C1H4R0CDD5#
9.4pF
±0.5pF GRM1532C1H9R4DDD5#
4.1pF
±0.25pF GRM1532C1H4R1CDD5#
9.5pF
±0.5pF GRM1532C1H9R5DDD5#
4.2pF
±0.25pF GRM1532C1H4R2CDD5#
9.6pF
±0.5pF GRM1532C1H9R6DDD5#
4.3pF
±0.25pF GRM1532C1H4R3CDD5#
9.7pF
±0.5pF GRM1532C1H9R7DDD5#
4.4pF
±0.25pF GRM1532C1H4R4CDD5#
9.8pF
±0.5pF GRM1532C1H9R8DDD5#
4.5pF
±0.25pF GRM1532C1H4R5CDD5#
9.9pF
±0.5pF GRM1532C1H9R9DDD5#
4.6pF
±0.25pF GRM1532C1H4R6CDD5#
10pF
±5%
GRM1532C1H100JDD5#
Part number # indicates the package specification code.
38
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.0×0.5mm)
±5%
GRM1532C1H120JDD5#
15pF
±5%
GRM1532C1H150JDD5#
18pF
±5%
GRM1532C1H180JDD5#
±0.1pF GRM1555C1H1R5BA01#
22pF
±5%
GRM1532C1H220JDD5#
±0.25pF GRM1555C1H1R5CA01#
27pF
±5%
GRM1532C1H270JDD5#
33pF
±5%
GRM1532C1H330JDD5#
±0.1pF GRM1555C1H1R6BA01#
39pF
±5%
GRM1532C1H390JDD5#
±0.25pF GRM1555C1H1R6CA01#
47pF
±5%
GRM1532C1H470JDD5#
56pF
±5%
GRM1532C1H560JDD5#
±0.1pF GRM1555C1H1R7BA01#
68pF
±5%
GRM1532C1H680JDD5#
±0.25pF GRM1555C1H1R7CA01#
1.4pF
±0.25pF GRM1555C1H1R4CA01#
1.5pF
±0.05pF GRM1555C1H1R5WA01#
±0.05pF GRM1555C1H1R7WA01#
82pF
±5%
GRM1532C1H820JDD5#
±5%
GRM1532C1H101JDD5#
±0.1pF GRM1555C1H1R8BA01#
120pF
±5%
GRM1532C1H121JDD5#
±0.25pF GRM1555C1H1R8CA01#
150pF
±5%
GRM1532C1H151JDD5#
180pF
±5%
GRM1532C1H181JDD5#
±0.1pF GRM1555C1H1R9BA01#
220pF
±5%
GRM1532C1H221JDD5#
±0.25pF GRM1555C1H1R9CA01#
270pF
±5%
GRM1532C1H271JDD5#
330pF
±5%
GRM1532C1H331JDD5#
±0.1pF GRM1555C1H2R0BA01#
390pF
±5%
GRM1532C1H391JDD5#
±0.25pF GRM1555C1H2R0CA01#
470pF
±5%
GRM1532C1H471JDD5#
560pF
±5%
GRM1532C1H561JDD5#
±5%
GRM1532C1H681JDD5#
1.8pF
1.9pF
2.0pF
2.1pF
±0.05pF GRM1555C1H1R8WA01#
±0.05pF GRM1555C1H1R9WA01#
±0.05pF GRM1555C1H2R0WA01#
±0.05pF GRM1555C1H2R1WA01#
±0.1pF GRM1555C1H2R1BA01#
±0.25pF GRM1555C1H2R1CA01#
0.1pF
±0.05pF GRM1555C1HR10WA01#
±0.1pF GRM1555C1HR10BA01#
±0.1pF GRM1555C1H2R2BA01#
0.2pF
±0.05pF GRM1555C1HR20WA01#
±0.25pF GRM1555C1H2R2CA01#
±0.1pF GRM1555C1HR20BA01#
0.3pF
0.4pF
2.2pF
2.3pF
±0.05pF GRM1555C1H2R2WA01#
±0.05pF GRM1555C1H2R3WA01#
±0.05pF GRM1555C1HR30WA01#
±0.1pF GRM1555C1H2R3BA01#
±0.1pF GRM1555C1HR30BA01#
±0.25pF GRM1555C1H2R3CA01#
±0.05pF GRM1555C1HR40WA01#
2.4pF
±0.05pF GRM1555C1H2R4WA01#
±0.1pF GRM1555C1HR40BA01#
±0.1pF GRM1555C1H2R4BA01#
0.5pF
±0.05pF GRM1555C1HR50WA01#
±0.25pF GRM1555C1H2R4CA01#
0.6pF
±0.05pF GRM1555C1HR60WA01#
±0.1pF GRM1555C1H2R5BA01#
±0.1pF GRM1555C1HR60BA01#
±0.25pF GRM1555C1H2R5CA01#
±0.1pF GRM1555C1HR50BA01#
0.7pF
±0.05pF GRM1555C1HR70WA01#
2.5pF
2.6pF
±0.05pF GRM1555C1H2R5WA01#
±0.05pF GRM1555C1H2R6WA01#
±0.1pF GRM1555C1HR70BA01#
±0.1pF GRM1555C1H2R6BA01#
0.8pF
±0.05pF GRM1555C1HR80WA01#
±0.25pF GRM1555C1H2R6CA01#
0.9pF
±0.05pF GRM1555C1HR90WA01#
±0.1pF GRM1555C1H2R7BA01#
±0.1pF GRM1555C1HR90BA01#
±0.25pF GRM1555C1H2R7CA01#
±0.1pF GRM1555C1HR80BA01#
1.0pF
±0.05pF GRM1555C1H1R0WA01#
2.7pF
2.8pF
±0.1pF GRM1555C1H1R0BA01#
1.2pF
1.3pF
1.4pF
±0.05pF GRM1555C1H1R1WA01#
±0.05pF GRM1555C1H2R7WA01#
±0.05pF GRM1555C1H2R8WA01#
±0.1pF GRM1555C1H2R8BA01#
±0.25pF GRM1555C1H1R0CA01#
1.1pF
±0.25pF GRM1555C1H2R8CA01#
2.9pF
±0.05pF GRM1555C1H2R9WA01#
±0.1pF GRM1555C1H1R1BA01#
±0.1pF GRM1555C1H2R9BA01#
±0.25pF GRM1555C1H1R1CA01#
±0.25pF GRM1555C1H2R9CA01#
±0.05pF GRM1555C1H1R2WA01#
3.0pF
±0.05pF GRM1555C1H3R0WA01#
±0.1pF GRM1555C1H1R2BA01#
±0.1pF GRM1555C1H3R0BA01#
±0.25pF GRM1555C1H1R2CA01#
±0.25pF GRM1555C1H3R0CA01#
±0.05pF GRM1555C1H1R3WA01#
3.1pF
±0.05pF GRM1555C1H3R1WA01#
±0.1pF GRM1555C1H1R3BA01#
±0.1pF GRM1555C1H3R1BA01#
±0.25pF GRM1555C1H1R3CA01#
±0.25pF GRM1555C1H3R1CA01#
±0.05pF GRM1555C1H1R4WA01#
±0.1pF GRM1555C1H1R4BA01#
Capacitor Array
GNM Series
1.7pF
±0.05pF GRM1555C1H1R6WA01#
Low ESL
LLp Series
1.6pF
High-Q Type
GJM Series
C0G
Part Number
100pF
680pF
0.55mm 50Vdc
C0G
Tol.
For General Purpose
GRM Series
12pF
0.55mm 50Vdc
Cap.
High Frequency
GQM Series
CH
Rated
TC
Voltage Code
Tol.
Monolithic Microchip
GMA Series
0.33mm 50Vdc
Part Number
T
max.
Cap.
3.2pF
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
±0.05pF GRM1555C1H3R2WA01#
±0.1pF GRM1555C1H3R2BA01#
Part number # indicates the package specification code.
39
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.0×0.5mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.55mm 50Vdc
C0G
Cap.
Tol.
Part Number
3.2pF
±0.25pF GRM1555C1H3R2CA01#
3.3pF
±0.05pF GRM1555C1H3R3WA01#
3.4pF
Rated
TC
Voltage Code
0.55mm 50Vdc
C0G
Cap.
5.0pF
±0.25pF GRM1555C1H5R0CA01#
5.1pF
±0.05pF GRM1555C1H5R1WA01#
±0.1pF GRM1555C1H5R1BA01#
±0.25pF GRM1555C1H5R1CA01#
±0.05pF GRM1555C1H3R4WA01#
±0.5pF GRM1555C1H5R1DA01#
5.2pF
±0.1pF GRM1555C1H5R2BA01#
±0.05pF GRM1555C1H3R5WA01#
±0.25pF GRM1555C1H5R2CA01#
Capacitor Array
GNM Series
±0.5pF GRM1555C1H5R2DA01#
5.3pF
±0.1pF GRM1555C1H5R3BA01#
±0.1pF GRM1555C1H3R6BA01#
±0.25pF GRM1555C1H5R3CA01#
±0.05pF GRM1555C1H3R7WA01#
Low ESL
LLp Series
±0.1pF GRM1555C1H5R4BA01#
±0.25pF GRM1555C1H5R4CA01#
±0.05pF GRM1555C1H3R8WA01#
±0.5pF GRM1555C1H5R4DA01#
5.5pF
High-Q Type
GJM Series
High Frequency
GQM Series
4.2pF
±0.25pF GRM1555C1H3R8CA01#
±0.1pF GRM1555C1H5R5BA01#
±0.25pF GRM1555C1H5R5CA01#
±0.1pF GRM1555C1H3R9BA01#
±0.5pF GRM1555C1H5R5DA01#
5.6pF
±0.1pF GRM1555C1H5R6BA01#
±0.1pF GRM1555C1H4R0BA01#
±0.25pF GRM1555C1H5R6CA01#
±0.05pF GRM1555C1H4R1WA01#
±0.5pF GRM1555C1H5R6DA01#
5.7pF
±0.1pF GRM1555C1H4R1BA01#
±0.1pF GRM1555C1H5R7BA01#
±0.25pF GRM1555C1H5R7CA01#
±0.05pF GRM1555C1H4R2WA01#
±0.5pF GRM1555C1H5R7DA01#
5.8pF
Monolithic Microchip
GMA Series
4.6pF
±0.1pF GRM1555C1H5R8BA01#
±0.05pF GRM1555C1H4R3WA01#
±0.25pF GRM1555C1H5R8CA01#
±0.5pF GRM1555C1H5R8DA01#
5.9pF
±0.1pF GRM1555C1H5R9BA01#
±0.1pF GRM1555C1H4R4BA01#
±0.25pF GRM1555C1H5R9CA01#
±0.25pF GRM1555C1H4R4CA01#
±0.5pF GRM1555C1H5R9DA01#
±0.05pF GRM1555C1H4R5WA01#
6.0pF
±0.1pF GRM1555C1H6R0BA01#
±0.25pF GRM1555C1H4R5CA01#
±0.25pF GRM1555C1H6R0CA01#
±0.05pF GRM1555C1H4R6WA01#
±0.5pF GRM1555C1H6R0DA01#
6.1pF
For Bonding
GMD Series
±0.25pF GRM1555C1H4R6CA01#
±0.1pF GRM1555C1H6R1BA01#
±0.25pF GRM1555C1H6R1CA01#
±0.5pF GRM1555C1H6R1DA01#
6.2pF
±0.05pF GRM1555C1H6R2WA01#
±0.05pF GRM1555C1H4R8WA01#
±0.1pF GRM1555C1H6R2BA01#
±0.1pF GRM1555C1H4R8BA01#
±0.25pF GRM1555C1H6R2CA01#
Product Information
±0.25pF GRM1555C1H4R8CA01#
5.0pF
±0.05pF GRM1555C1H6R1WA01#
±0.05pF GRM1555C1H4R7WA01#
±0.1pF GRM1555C1H4R7BA01#
4.9pF
±0.05pF GRM1555C1H6R0WA01#
±0.1pF GRM1555C1H4R5BA01#
±0.25pF GRM1555C1H4R7CA01#
4.8pF
±0.05pF GRM1555C1H5R9WA01#
±0.05pF GRM1555C1H4R4WA01#
±0.1pF GRM1555C1H4R6BA01#
4.7pF
±0.05pF GRM1555C1H5R8WA01#
±0.25pF GRM1555C1H4R2CA01#
±0.25pF GRM1555C1H4R3CA01#
4.5pF
±0.05pF GRM1555C1H5R7WA01#
±0.25pF GRM1555C1H4R1CA01#
±0.1pF GRM1555C1H4R3BA01#
4.4pF
±0.05pF GRM1555C1H5R6WA01#
±0.05pF GRM1555C1H4R0WA01#
±0.1pF GRM1555C1H4R2BA01#
4.3pF
±0.05pF GRM1555C1H5R5WA01#
±0.05pF GRM1555C1H3R9WA01#
±0.25pF GRM1555C1H4R0CA01#
4.1pF
±0.05pF GRM1555C1H5R4WA01#
±0.25pF GRM1555C1H3R7CA01#
±0.25pF GRM1555C1H3R9CA01#
4.0pF
±0.5pF GRM1555C1H5R3DA01#
5.4pF
±0.1pF GRM1555C1H3R7BA01#
±0.1pF GRM1555C1H3R8BA01#
3.9pF
±0.05pF GRM1555C1H5R3WA01#
±0.05pF GRM1555C1H3R6WA01#
±0.25pF GRM1555C1H3R6CA01#
3.8pF
±0.05pF GRM1555C1H5R2WA01#
±0.25pF GRM1555C1H3R4CA01#
±0.1pF GRM1555C1H3R5BA01#
3.7pF
Part Number
±0.25pF GRM1555C1H3R3CA01#
±0.25pF GRM1555C1H3R5CA01#
3.6pF
Tol.
±0.1pF GRM1555C1H3R3BA01#
±0.1pF GRM1555C1H3R4BA01#
3.5pF
T
max.
±0.05pF GRM1555C1H4R9WA01#
±0.5pF GRM1555C1H6R2DA01#
6.3pF
±0.05pF GRM1555C1H6R3WA01#
±0.1pF GRM1555C1H4R9BA01#
±0.1pF GRM1555C1H6R3BA01#
±0.25pF GRM1555C1H4R9CA01#
±0.25pF GRM1555C1H6R3CA01#
±0.05pF GRM1555C1H5R0WA01#
±0.5pF GRM1555C1H6R3DA01#
±0.1pF GRM1555C1H5R0BA01#
6.4pF
±0.05pF GRM1555C1H6R4WA01#
Part number # indicates the package specification code.
40
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.0×0.5mm)
7.7pF
±0.5pF GRM1555C1H7R7DA01#
7.8pF
±0.05pF GRM1555C1H7R8WA01#
±0.5pF GRM1555C1H6R4DA01#
±0.1pF GRM1555C1H7R8BA01#
±0.25pF GRM1555C1H7R8CA01#
±0.1pF GRM1555C1H6R5BA01#
±0.5pF GRM1555C1H7R8DA01#
7.9pF
±0.1pF GRM1555C1H7R9BA01#
±0.05pF GRM1555C1H6R6WA01#
±0.25pF GRM1555C1H7R9CA01#
±0.1pF GRM1555C1H6R6BA01#
±0.5pF GRM1555C1H7R9DA01#
8.0pF
±0.5pF GRM1555C1H6R6DA01#
±0.1pF GRM1555C1H8R0BA01#
±0.25pF GRM1555C1H8R0CA01#
±0.1pF GRM1555C1H6R7BA01#
±0.5pF GRM1555C1H8R0DA01#
8.1pF
±0.1pF GRM1555C1H8R1BA01#
±0.05pF GRM1555C1H6R8WA01#
±0.25pF GRM1555C1H8R1CA01#
±0.1pF GRM1555C1H6R8BA01#
±0.5pF GRM1555C1H8R1DA01#
8.2pF
±0.5pF GRM1555C1H6R8DA01#
±0.1pF GRM1555C1H8R2BA01#
±0.25pF GRM1555C1H8R2CA01#
±0.1pF GRM1555C1H6R9BA01#
±0.5pF GRM1555C1H8R2DA01#
8.3pF
±0.1pF GRM1555C1H8R3BA01#
±0.05pF GRM1555C1H7R0WA01#
±0.25pF GRM1555C1H8R3CA01#
±0.1pF GRM1555C1H7R0BA01#
±0.5pF GRM1555C1H8R3DA01#
8.4pF
±0.5pF GRM1555C1H7R0DA01#
±0.1pF GRM1555C1H8R4BA01#
±0.25pF GRM1555C1H8R4CA01#
±0.1pF GRM1555C1H7R1BA01#
±0.5pF GRM1555C1H8R4DA01#
8.5pF
±0.1pF GRM1555C1H8R5BA01#
±0.05pF GRM1555C1H7R2WA01#
±0.25pF GRM1555C1H8R5CA01#
±0.25pF GRM1555C1H7R2CA01#
±0.5pF GRM1555C1H8R5DA01#
8.6pF
±0.5pF GRM1555C1H7R2DA01#
±0.1pF GRM1555C1H8R6BA01#
±0.25pF GRM1555C1H8R6CA01#
±0.1pF GRM1555C1H7R3BA01#
±0.5pF GRM1555C1H8R6DA01#
8.7pF
±0.1pF GRM1555C1H8R7BA01#
±0.05pF GRM1555C1H7R4WA01#
±0.25pF GRM1555C1H8R7CA01#
±0.1pF GRM1555C1H7R4BA01#
±0.5pF GRM1555C1H8R7DA01#
8.8pF
±0.5pF GRM1555C1H7R4DA01#
±0.1pF GRM1555C1H8R8BA01#
±0.25pF GRM1555C1H8R8CA01#
±0.1pF GRM1555C1H7R5BA01#
±0.5pF GRM1555C1H8R8DA01#
8.9pF
±0.05pF GRM1555C1H8R9WA01#
±0.5pF GRM1555C1H7R5DA01#
±0.1pF GRM1555C1H8R9BA01#
±0.05pF GRM1555C1H7R6WA01#
±0.25pF GRM1555C1H8R9CA01#
±0.1pF GRM1555C1H7R6BA01#
±0.25pF GRM1555C1H7R6CA01#
7.7pF
±0.05pF GRM1555C1H8R8WA01#
±0.05pF GRM1555C1H7R5WA01#
±0.25pF GRM1555C1H7R5CA01#
7.6pF
±0.05pF GRM1555C1H8R7WA01#
±0.5pF GRM1555C1H7R3DA01#
±0.25pF GRM1555C1H7R4CA01#
7.5pF
±0.05pF GRM1555C1H8R6WA01#
±0.05pF GRM1555C1H7R3WA01#
±0.25pF GRM1555C1H7R3CA01#
7.4pF
±0.05pF GRM1555C1H8R5WA01#
±0.5pF GRM1555C1H7R1DA01#
±0.1pF GRM1555C1H7R2BA01#
7.3pF
±0.05pF GRM1555C1H8R4WA01#
±0.05pF GRM1555C1H7R1WA01#
±0.25pF GRM1555C1H7R1CA01#
7.2pF
±0.05pF GRM1555C1H8R3WA01#
±0.5pF GRM1555C1H6R9DA01#
±0.25pF GRM1555C1H7R0CA01#
7.1pF
±0.05pF GRM1555C1H8R2WA01#
±0.05pF GRM1555C1H6R9WA01#
±0.25pF GRM1555C1H6R9CA01#
7.0pF
±0.05pF GRM1555C1H8R1WA01#
±0.5pF GRM1555C1H6R7DA01#
±0.25pF GRM1555C1H6R8CA01#
6.9pF
±0.05pF GRM1555C1H8R0WA01#
±0.05pF GRM1555C1H6R7WA01#
±0.25pF GRM1555C1H6R7CA01#
6.8pF
±0.05pF GRM1555C1H7R9WA01#
±0.5pF GRM1555C1H6R5DA01#
±0.25pF GRM1555C1H6R6CA01#
6.7pF
Part Number
±0.5pF GRM1555C1H8R9DA01#
9.0pF
±0.05pF GRM1555C1H9R0WA01#
±0.5pF GRM1555C1H7R6DA01#
±0.1pF GRM1555C1H9R0BA01#
±0.05pF GRM1555C1H7R7WA01#
±0.25pF GRM1555C1H9R0CA01#
±0.1pF GRM1555C1H7R7BA01#
±0.5pF GRM1555C1H9R0DA01#
±0.25pF GRM1555C1H7R7CA01#
For General Purpose
GRM Series
C0G
Tol.
±0.05pF GRM1555C1H6R5WA01#
±0.25pF GRM1555C1H6R5CA01#
6.6pF
0.55mm 50Vdc
Cap.
Capacitor Array
GNM Series
6.5pF
Rated
TC
Voltage Code
Low ESL
LLp Series
±0.1pF GRM1555C1H6R4BA01#
±0.25pF GRM1555C1H6R4CA01#
T
max.
High-Q Type
GJM Series
6.4pF
Part Number
High Frequency
GQM Series
C0G
Tol.
Monolithic Microchip
GMA Series
0.55mm 50Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
9.1pF
±0.05pF GRM1555C1H9R1WA01#
Part number # indicates the package specification code.
41
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.0×0.5mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.55mm 50Vdc
C0G
Cap.
9.1pF
Tol.
Part Number
±0.1pF GRM1555C1H9R1BA01#
T
max.
Rated
TC
Voltage Code
0.55mm 50Vdc
C0G
±0.25pF GRM1555C1H9R1CA01#
Cap.
Tol.
56pF
±5%
GRM1555C1H560JA01#
68pF
±2%
GRM1555C1H680GA01#
±5%
GRM1555C1H680JA01#
±2%
GRM1555C1H820GA01#
±5%
GRM1555C1H820JA01#
±2%
GRM1555C1H101GA01#
±5%
GRM1555C1H101JA01#
±2%
GRM1555C1H121GA01#
±5%
GRM1555C1H121JA01#
150pF
±2%
GRM1555C1H151GA01#
±5%
GRM1555C1H151JA01#
180pF
±2%
GRM1555C1H181GA01#
±5%
GRM1555C1H181JA01#
±2%
GRM1555C1H221GA01#
±5%
GRM1555C1H221JA01#
270pF
±2%
GRM1555C1H271GA01#
±5%
GRM1555C1H271JA01#
330pF
±2%
GRM1555C1H331GA01#
±5%
GRM1555C1H331JA01#
±2%
GRM1555C1H391GA01#
±5%
GRM1555C1H391JA01#
±2%
GRM1555C1H471GA01#
±5%
GRM1555C1H471JA01#
±2%
GRM1555C1H561GA01#
±5%
GRM1555C1H561JA01#
680pF
±2%
GRM1555C1H681GA01#
±5%
GRM1555C1H681JA01#
820pF
±2%
GRM1555C1H821GA01#
±5%
GRM1555C1H821JA01#
±2%
GRM1555C1H102GA01#
±5%
GRM1555C1H102JA01#
±0.5pF GRM1555C1H9R1DA01#
9.2pF
±0.05pF GRM1555C1H9R2WA01#
82pF
±0.1pF GRM1555C1H9R2BA01#
±0.25pF GRM1555C1H9R2CA01#
100pF
±0.5pF GRM1555C1H9R2DA01#
9.3pF
±0.05pF GRM1555C1H9R3WA01#
120pF
Capacitor Array
GNM Series
±0.1pF GRM1555C1H9R3BA01#
±0.25pF GRM1555C1H9R3CA01#
±0.5pF GRM1555C1H9R3DA01#
9.4pF
±0.05pF GRM1555C1H9R4WA01#
±0.1pF GRM1555C1H9R4BA01#
±0.25pF GRM1555C1H9R4CA01#
220pF
±0.5pF GRM1555C1H9R4DA01#
Low ESL
LLp Series
9.5pF
±0.05pF GRM1555C1H9R5WA01#
±0.1pF GRM1555C1H9R5BA01#
±0.25pF GRM1555C1H9R5CA01#
±0.5pF GRM1555C1H9R5DA01#
9.6pF
±0.05pF GRM1555C1H9R6WA01#
390pF
±0.1pF GRM1555C1H9R6BA01#
±0.25pF GRM1555C1H9R6CA01#
470pF
High-Q Type
GJM Series
±0.5pF GRM1555C1H9R6DA01#
9.7pF
±0.05pF GRM1555C1H9R7WA01#
560pF
±0.1pF GRM1555C1H9R7BA01#
±0.25pF GRM1555C1H9R7CA01#
±0.5pF GRM1555C1H9R7DA01#
9.8pF
±0.05pF GRM1555C1H9R8WA01#
High Frequency
GQM Series
±0.1pF GRM1555C1H9R8BA01#
±0.25pF GRM1555C1H9R8CA01#
1000pF
±0.5pF GRM1555C1H9R8DA01#
9.9pF
±0.05pF GRM1555C1H9R9WA01#
CK
0.1pF
±0.05pF GRM1554C1HR10WA01#
0.2pF
±0.05pF GRM1554C1HR20WA01#
0.3pF
±0.05pF GRM1554C1HR30WA01#
±0.1pF GRM1555C1H9R9BA01#
±0.25pF GRM1555C1H9R9CA01#
Part Number
±0.1pF GRM1554C1HR10BA01#
Monolithic Microchip
GMA Series
±0.5pF GRM1555C1H9R9DA01#
±0.1pF GRM1554C1HR20BA01#
±2%
GRM1555C1H100GA01#
±5%
GRM1555C1H100JA01#
±2%
GRM1555C1H120GA01#
±5%
GRM1555C1H120JA01#
15pF
±2%
GRM1555C1H150GA01#
±5%
GRM1555C1H150JA01#
18pF
±2%
GRM1555C1H180GA01#
±5%
GRM1555C1H180JA01#
22pF
±2%
GRM1555C1H220GA01#
±5%
GRM1555C1H220JA01#
27pF
±2%
GRM1555C1H270GA01#
±5%
GRM1555C1H270JA01#
±2%
GRM1555C1H330GA01#
±5%
GRM1555C1H330JA01#
39pF
±2%
GRM1555C1H390GA01#
±5%
GRM1555C1H390JA01#
±0.1pF GRM1554C1H1R0BA01#
47pF
±2%
GRM1555C1H470GA01#
±0.25pF GRM1554C1H1R0CA01#
±5%
GRM1555C1H470JA01#
±2%
GRM1555C1H560GA01#
10pF
12pF
For Bonding
GMD Series
33pF
Product Information
56pF
±0.1pF GRM1554C1HR30BA01#
0.4pF
±0.05pF GRM1554C1HR40WA01#
0.5pF
±0.05pF GRM1554C1HR50WA01#
0.6pF
±0.05pF GRM1554C1HR60WA01#
0.7pF
±0.05pF GRM1554C1HR70WA01#
0.8pF
±0.05pF GRM1554C1HR80WA01#
±0.1pF GRM1554C1HR40BA01#
±0.1pF GRM1554C1HR50BA01#
±0.1pF GRM1554C1HR60BA01#
±0.1pF GRM1554C1HR70BA01#
±0.1pF GRM1554C1HR80BA01#
0.9pF
±0.05pF GRM1554C1HR90WA01#
1.0pF
±0.05pF GRM1554C1H1R0WA01#
±0.1pF GRM1554C1HR90BA01#
1.1pF
±0.05pF GRM1554C1H1R1WA01#
±0.1pF GRM1554C1H1R1BA01#
Part number # indicates the package specification code.
42
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.0×0.5mm)
1.3pF
1.4pF
1.5pF
1.6pF
1.7pF
1.8pF
0.55mm 50Vdc
CJ
±0.25pF GRM1553C1H2R9CA01#
3.0pF
±0.05pF GRM1553C1H3R0WA01#
±0.1pF GRM1554C1H1R2BA01#
±0.1pF GRM1553C1H3R0BA01#
±0.25pF GRM1554C1H1R2CA01#
±0.25pF GRM1553C1H3R0CA01#
±0.05pF GRM1554C1H1R3WA01#
3.1pF
CJ
2.1pF
2.2pF
2.3pF
2.4pF
2.5pF
±0.1pF GRM1554C1H1R3BA01#
±0.1pF GRM1553C1H3R1BA01#
±0.25pF GRM1553C1H3R1CA01#
±0.05pF GRM1554C1H1R4WA01#
3.2pF
±0.1pF GRM1553C1H3R2BA01#
±0.25pF GRM1554C1H1R4CA01#
±0.25pF GRM1553C1H3R2CA01#
±0.05pF GRM1554C1H1R5WA01#
3.3pF
2.8pF
2.9pF
±0.05pF GRM1553C1H3R3WA01#
±0.1pF GRM1554C1H1R5BA01#
±0.1pF GRM1553C1H3R3BA01#
±0.25pF GRM1554C1H1R5CA01#
±0.25pF GRM1553C1H3R3CA01#
±0.05pF GRM1554C1H1R6WA01#
3.4pF
±0.05pF GRM1553C1H3R4WA01#
±0.1pF GRM1554C1H1R6BA01#
±0.1pF GRM1553C1H3R4BA01#
±0.25pF GRM1554C1H1R6CA01#
±0.25pF GRM1553C1H3R4CA01#
±0.05pF GRM1554C1H1R7WA01#
3.5pF
±0.05pF GRM1553C1H3R5WA01#
±0.1pF GRM1554C1H1R7BA01#
±0.1pF GRM1553C1H3R5BA01#
±0.25pF GRM1554C1H1R7CA01#
±0.25pF GRM1553C1H3R5CA01#
±0.05pF GRM1554C1H1R8WA01#
3.6pF
±0.05pF GRM1553C1H3R6WA01#
±0.1pF GRM1553C1H3R6BA01#
±0.25pF GRM1553C1H3R6CA01#
±0.05pF GRM1554C1H1R9WA01#
3.7pF
±0.05pF GRM1553C1H3R7WA01#
±0.1pF GRM1554C1H1R9BA01#
±0.1pF GRM1553C1H3R7BA01#
±0.25pF GRM1554C1H1R9CA01#
±0.25pF GRM1553C1H3R7CA01#
±0.05pF GRM1554C1H2R0WA01#
3.8pF
±0.05pF GRM1553C1H3R8WA01#
±0.1pF GRM1554C1H2R0BA01#
±0.1pF GRM1553C1H3R8BA01#
±0.25pF GRM1554C1H2R0CA01#
±0.25pF GRM1553C1H3R8CA01#
±0.05pF GRM1553C1H2R1WA01#
3.9pF
±0.05pF GRM1553C1H3R9WA01#
±0.1pF GRM1553C1H2R1BA01#
±0.1pF GRM1553C1H3R9BA01#
±0.25pF GRM1553C1H2R1CA01#
±0.25pF GRM1553C1H3R9CA01#
±0.05pF GRM1553C1H2R2WA01#
CH
4.0pF
±0.05pF GRM1552C1H4R0WA01#
±0.1pF GRM1553C1H2R2BA01#
±0.1pF GRM1552C1H4R0BA01#
±0.25pF GRM1553C1H2R2CA01#
±0.25pF GRM1552C1H4R0CA01#
±0.05pF GRM1553C1H2R3WA01#
4.1pF
±0.05pF GRM1552C1H4R1WA01#
±0.1pF GRM1553C1H2R3BA01#
±0.1pF GRM1552C1H4R1BA01#
±0.25pF GRM1553C1H2R3CA01#
±0.25pF GRM1552C1H4R1CA01#
±0.05pF GRM1553C1H2R4WA01#
4.2pF
±0.05pF GRM1552C1H4R2WA01#
±0.1pF GRM1553C1H2R4BA01#
±0.1pF GRM1552C1H4R2BA01#
±0.25pF GRM1553C1H2R4CA01#
±0.25pF GRM1552C1H4R2CA01#
±0.05pF GRM1553C1H2R5WA01#
4.3pF
±0.05pF GRM1553C1H2R6WA01#
±0.05pF GRM1552C1H4R3WA01#
±0.1pF GRM1552C1H4R3BA01#
±0.25pF GRM1553C1H2R5CA01#
2.7pF
±0.05pF GRM1553C1H3R2WA01#
±0.1pF GRM1554C1H1R4BA01#
±0.1pF GRM1553C1H2R5BA01#
2.6pF
±0.05pF GRM1553C1H3R1WA01#
±0.25pF GRM1554C1H1R3CA01#
±0.25pF GRM1554C1H1R8CA01#
2.0pF
Part Number
2.9pF
±0.1pF GRM1554C1H1R8BA01#
1.9pF
Tol.
±0.25pF GRM1552C1H4R3CA01#
4.4pF
±0.05pF GRM1552C1H4R4WA01#
±0.1pF GRM1553C1H2R6BA01#
±0.1pF GRM1552C1H4R4BA01#
±0.25pF GRM1553C1H2R6CA01#
±0.25pF GRM1552C1H4R4CA01#
±0.05pF GRM1553C1H2R7WA01#
4.5pF
±0.05pF GRM1552C1H4R5WA01#
±0.1pF GRM1553C1H2R7BA01#
±0.1pF GRM1552C1H4R5BA01#
±0.25pF GRM1553C1H2R7CA01#
±0.25pF GRM1552C1H4R5CA01#
±0.05pF GRM1553C1H2R8WA01#
4.6pF
±0.05pF GRM1552C1H4R6WA01#
±0.1pF GRM1553C1H2R8BA01#
±0.1pF GRM1552C1H4R6BA01#
±0.25pF GRM1553C1H2R8CA01#
±0.25pF GRM1552C1H4R6CA01#
±0.05pF GRM1553C1H2R9WA01#
±0.1pF GRM1553C1H2R9BA01#
For General Purpose
GRM Series
±0.05pF GRM1554C1H1R2WA01#
Cap.
Capacitor Array
GNM Series
±0.25pF GRM1554C1H1R1CA01#
1.2pF
Rated
TC
Voltage Code
Low ESL
LLp Series
1.1pF
T
max.
High-Q Type
GJM Series
Part Number
High Frequency
GQM Series
CK
Tol.
Monolithic Microchip
GMA Series
0.55mm 50Vdc
Cap.
4.7pF
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
±0.05pF GRM1552C1H4R7WA01#
±0.1pF GRM1552C1H4R7BA01#
Part number # indicates the package specification code.
43
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.0×0.5mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.55mm 50Vdc
CH
Cap.
Tol.
Part Number
T
max.
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
4.7pF
±0.25pF GRM1552C1H4R7CA01#
4.8pF
±0.05pF GRM1552C1H4R8WA01#
±0.1pF GRM1552C1H6R2BA01#
±0.1pF GRM1552C1H4R8BA01#
±0.25pF GRM1552C1H6R2CA01#
0.55mm 50Vdc
CH
6.2pF
±0.25pF GRM1552C1H4R8CA01#
4.9pF
5.0pF
±0.05pF GRM1552C1H4R9WA01#
±0.5pF GRM1552C1H6R2DA01#
6.3pF
±0.1pF GRM1552C1H4R9BA01#
±0.1pF GRM1552C1H6R3BA01#
±0.25pF GRM1552C1H6R3CA01#
±0.05pF GRM1552C1H5R0WA01#
±0.5pF GRM1552C1H6R3DA01#
Capacitor Array
GNM Series
6.4pF
±0.1pF GRM1552C1H6R4BA01#
±0.05pF GRM1552C1H5R1WA01#
±0.25pF GRM1552C1H6R4CA01#
±0.25pF GRM1552C1H5R1CA01#
±0.5pF GRM1552C1H6R4DA01#
6.5pF
Low ESL
LLp Series
±0.5pF GRM1552C1H5R1DA01#
±0.1pF GRM1552C1H6R5BA01#
±0.25pF GRM1552C1H6R5CA01#
±0.1pF GRM1552C1H5R2BA01#
±0.5pF GRM1552C1H6R5DA01#
6.6pF
±0.1pF GRM1552C1H6R6BA01#
±0.05pF GRM1552C1H5R3WA01#
±0.25pF GRM1552C1H6R6CA01#
±0.1pF GRM1552C1H5R3BA01#
±0.5pF GRM1552C1H6R6DA01#
6.7pF
High-Q Type
GJM Series
±0.5pF GRM1552C1H5R3DA01#
±0.1pF GRM1552C1H6R7BA01#
±0.25pF GRM1552C1H6R7CA01#
±0.1pF GRM1552C1H5R4BA01#
±0.5pF GRM1552C1H6R7DA01#
6.8pF
±0.1pF GRM1552C1H6R8BA01#
±0.05pF GRM1552C1H5R5WA01#
±0.25pF GRM1552C1H6R8CA01#
High Frequency
GQM Series
±0.25pF GRM1552C1H5R5CA01#
±0.5pF GRM1552C1H6R8DA01#
6.9pF
±0.5pF GRM1552C1H5R5DA01#
±0.1pF GRM1552C1H6R9BA01#
±0.25pF GRM1552C1H6R9CA01#
±0.1pF GRM1552C1H5R6BA01#
±0.5pF GRM1552C1H6R9DA01#
7.0pF
Monolithic Microchip
GMA Series
±0.5pF GRM1552C1H5R6DA01#
±0.1pF GRM1552C1H7R0BA01#
±0.25pF GRM1552C1H7R0CA01#
±0.1pF GRM1552C1H5R7BA01#
±0.5pF GRM1552C1H7R0DA01#
7.1pF
±0.5pF GRM1552C1H5R7DA01#
±0.1pF GRM1552C1H7R1BA01#
±0.25pF GRM1552C1H7R1CA01#
±0.1pF GRM1552C1H5R8BA01#
±0.5pF GRM1552C1H7R1DA01#
7.2pF
For Bonding
GMD Series
±0.1pF GRM1552C1H7R2BA01#
±0.05pF GRM1552C1H5R9WA01#
±0.25pF GRM1552C1H7R2CA01#
±0.25pF GRM1552C1H5R9CA01#
±0.5pF GRM1552C1H7R2DA01#
7.3pF
±0.05pF GRM1552C1H7R3WA01#
±0.5pF GRM1552C1H5R9DA01#
±0.1pF GRM1552C1H7R3BA01#
±0.05pF GRM1552C1H6R0WA01#
±0.25pF GRM1552C1H7R3CA01#
±0.1pF GRM1552C1H6R0BA01#
Product Information
±0.25pF GRM1552C1H6R0CA01#
6.1pF
±0.05pF GRM1552C1H7R2WA01#
±0.5pF GRM1552C1H5R8DA01#
±0.1pF GRM1552C1H5R9BA01#
6.0pF
±0.05pF GRM1552C1H7R1WA01#
±0.05pF GRM1552C1H5R8WA01#
±0.25pF GRM1552C1H5R8CA01#
5.9pF
±0.05pF GRM1552C1H7R0WA01#
±0.05pF GRM1552C1H5R7WA01#
±0.25pF GRM1552C1H5R7CA01#
5.8pF
±0.05pF GRM1552C1H6R9WA01#
±0.05pF GRM1552C1H5R6WA01#
±0.25pF GRM1552C1H5R6CA01#
5.7pF
±0.05pF GRM1552C1H6R8WA01#
±0.5pF GRM1552C1H5R4DA01#
±0.1pF GRM1552C1H5R5BA01#
5.6pF
±0.05pF GRM1552C1H6R7WA01#
±0.05pF GRM1552C1H5R4WA01#
±0.25pF GRM1552C1H5R4CA01#
5.5pF
±0.05pF GRM1552C1H6R6WA01#
±0.5pF GRM1552C1H5R2DA01#
±0.25pF GRM1552C1H5R3CA01#
5.4pF
±0.05pF GRM1552C1H6R5WA01#
±0.05pF GRM1552C1H5R2WA01#
±0.25pF GRM1552C1H5R2CA01#
5.3pF
±0.05pF GRM1552C1H6R4WA01#
±0.25pF GRM1552C1H5R0CA01#
±0.1pF GRM1552C1H5R1BA01#
5.2pF
±0.05pF GRM1552C1H6R3WA01#
±0.25pF GRM1552C1H4R9CA01#
±0.1pF GRM1552C1H5R0BA01#
5.1pF
±0.05pF GRM1552C1H6R2WA01#
±0.5pF GRM1552C1H7R3DA01#
7.4pF
±0.05pF GRM1552C1H7R4WA01#
±0.5pF GRM1552C1H6R0DA01#
±0.1pF GRM1552C1H7R4BA01#
±0.05pF GRM1552C1H6R1WA01#
±0.25pF GRM1552C1H7R4CA01#
±0.5pF GRM1552C1H7R4DA01#
±0.1pF GRM1552C1H6R1BA01#
±0.25pF GRM1552C1H6R1CA01#
±0.5pF GRM1552C1H6R1DA01#
7.5pF
±0.05pF GRM1552C1H7R5WA01#
±0.1pF GRM1552C1H7R5BA01#
Part number # indicates the package specification code.
44
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.0×0.5mm)
CH
8.9pF
±0.1pF GRM1552C1H8R9BA01#
±0.25pF GRM1552C1H8R9CA01#
±0.5pF GRM1552C1H8R9DA01#
9.0pF
±0.5pF GRM1552C1H7R6DA01#
±0.1pF GRM1552C1H9R0BA01#
±0.25pF GRM1552C1H9R0CA01#
±0.1pF GRM1552C1H7R7BA01#
±0.5pF GRM1552C1H9R0DA01#
9.1pF
±0.1pF GRM1552C1H9R1BA01#
±0.05pF GRM1552C1H7R8WA01#
±0.25pF GRM1552C1H9R1CA01#
±0.25pF GRM1552C1H7R8CA01#
±0.5pF GRM1552C1H9R1DA01#
9.2pF
±0.5pF GRM1552C1H7R8DA01#
±0.1pF GRM1552C1H9R2BA01#
±0.25pF GRM1552C1H9R2CA01#
±0.1pF GRM1552C1H7R9BA01#
±0.5pF GRM1552C1H9R2DA01#
9.3pF
±0.1pF GRM1552C1H9R3BA01#
±0.05pF GRM1552C1H8R0WA01#
±0.25pF GRM1552C1H9R3CA01#
±0.1pF GRM1552C1H8R0BA01#
±0.5pF GRM1552C1H9R3DA01#
9.4pF
±0.5pF GRM1552C1H8R0DA01#
±0.1pF GRM1552C1H9R4BA01#
±0.25pF GRM1552C1H9R4CA01#
±0.1pF GRM1552C1H8R1BA01#
±0.5pF GRM1552C1H9R4DA01#
9.5pF
±0.1pF GRM1552C1H9R5BA01#
±0.05pF GRM1552C1H8R2WA01#
±0.25pF GRM1552C1H9R5CA01#
±0.25pF GRM1552C1H8R2CA01#
±0.5pF GRM1552C1H9R5DA01#
9.6pF
±0.5pF GRM1552C1H8R2DA01#
±0.1pF GRM1552C1H9R6BA01#
±0.25pF GRM1552C1H9R6CA01#
±0.1pF GRM1552C1H8R3BA01#
±0.5pF GRM1552C1H9R6DA01#
9.7pF
±0.5pF GRM1552C1H8R3DA01#
±0.1pF GRM1552C1H9R7BA01#
±0.25pF GRM1552C1H9R7CA01#
±0.1pF GRM1552C1H8R4BA01#
±0.5pF GRM1552C1H9R7DA01#
9.8pF
±0.5pF GRM1552C1H8R4DA01#
±0.1pF GRM1552C1H9R8BA01#
±0.25pF GRM1552C1H9R8CA01#
±0.1pF GRM1552C1H8R5BA01#
±0.5pF GRM1552C1H9R8DA01#
9.9pF
±0.05pF GRM1552C1H9R9WA01#
±0.5pF GRM1552C1H8R5DA01#
±0.1pF GRM1552C1H9R9BA01#
±0.05pF GRM1552C1H8R6WA01#
±0.25pF GRM1552C1H9R9CA01#
±0.1pF GRM1552C1H8R6BA01#
±0.25pF GRM1552C1H8R6CA01#
±0.5pF GRM1552C1H9R9DA01#
10pF
±0.5pF GRM1552C1H8R6DA01#
±0.05pF GRM1552C1H8R7WA01#
12pF
±0.1pF GRM1552C1H8R7BA01#
±0.25pF GRM1552C1H8R7CA01#
15pF
±0.5pF GRM1552C1H8R7DA01#
8.8pF
±0.05pF GRM1552C1H9R8WA01#
±0.05pF GRM1552C1H8R5WA01#
±0.25pF GRM1552C1H8R5CA01#
8.7pF
±0.05pF GRM1552C1H9R7WA01#
±0.05pF GRM1552C1H8R4WA01#
±0.25pF GRM1552C1H8R4CA01#
8.6pF
±0.05pF GRM1552C1H9R6WA01#
±0.05pF GRM1552C1H8R3WA01#
±0.25pF GRM1552C1H8R3CA01#
8.5pF
±0.05pF GRM1552C1H9R5WA01#
±0.5pF GRM1552C1H8R1DA01#
±0.1pF GRM1552C1H8R2BA01#
8.4pF
±0.05pF GRM1552C1H9R4WA01#
±0.05pF GRM1552C1H8R1WA01#
±0.25pF GRM1552C1H8R1CA01#
8.3pF
±0.05pF GRM1552C1H9R3WA01#
±0.5pF GRM1552C1H7R9DA01#
±0.25pF GRM1552C1H8R0CA01#
8.2pF
±0.05pF GRM1552C1H9R2WA01#
±0.05pF GRM1552C1H7R9WA01#
±0.25pF GRM1552C1H7R9CA01#
8.1pF
±0.05pF GRM1552C1H9R1WA01#
±0.5pF GRM1552C1H7R7DA01#
±0.1pF GRM1552C1H7R8BA01#
8.0pF
±0.05pF GRM1552C1H9R0WA01#
±0.05pF GRM1552C1H7R7WA01#
±0.25pF GRM1552C1H7R7CA01#
7.9pF
±0.05pF GRM1552C1H8R9WA01#
±0.05pF GRM1552C1H7R6WA01#
±0.1pF GRM1552C1H7R6BA01#
7.8pF
Part Number
±0.5pF GRM1552C1H7R5DA01#
±0.25pF GRM1552C1H7R6CA01#
7.7pF
Tol.
±0.05pF GRM1552C1H8R8WA01#
18pF
±0.1pF GRM1552C1H8R8BA01#
±0.25pF GRM1552C1H8R8CA01#
±0.5pF GRM1552C1H8R8DA01#
For General Purpose
GRM Series
0.55mm 50Vdc
Cap.
Capacitor Array
GNM Series
Rated
TC
Voltage Code
Low ESL
LLp Series
7.6pF
±0.25pF GRM1552C1H7R5CA01#
T
max.
High-Q Type
GJM Series
7.5pF
Part Number
High Frequency
GQM Series
CH
Tol.
Monolithic Microchip
GMA Series
0.55mm 50Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
22pF
±2%
GRM1552C1H100GA01#
±5%
GRM1552C1H100JA01#
±2%
GRM1552C1H120GA01#
±5%
GRM1552C1H120JA01#
±2%
GRM1552C1H150GA01#
±5%
GRM1552C1H150JA01#
±2%
GRM1552C1H180GA01#
±5%
GRM1552C1H180JA01#
±2%
GRM1552C1H220GA01#
±5%
GRM1552C1H220JA01#
Product Information
T
max.
Part number # indicates the package specification code.
45
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.0×0.5mm)
T
max.
Rated
TC
Voltage Code
Part Number
27pF
±2%
GRM1552C1H270GA01#
±5%
GRM1552C1H270JA01#
±2%
GRM1552C1H330GA01#
±5%
39pF
47pF
T
max.
Rated
TC
Voltage Code
Tol.
GRM1556P1H270JZ01#
27pF
PK
1.0pF
2.0pF
±0.25pF GRM1554P1H2R0CZ01#
GRM1552C1H330JA01#
PJ
3.0pF
±0.25pF GRM1553P1H3R0CZ01#
±2%
GRM1552C1H390GA01#
PH
4.0pF
±0.25pF GRM1552P1H4R0CZ01#
±5%
GRM1552C1H390JA01#
5.0pF
±0.25pF GRM1552P1H5R0CZ01#
±2%
GRM1552C1H470GA01#
6.0pF
±0.5pF GRM1552P1H6R0DZ01#
±5%
GRM1552C1H470JA01#
7.0pF
±0.5pF GRM1552P1H7R0DZ01#
±2%
GRM1552C1H560GA01#
8.0pF
±0.5pF GRM1552P1H8R0DZ01#
±5%
GRM1552C1H560JA01#
9.0pF
±0.5pF GRM1552P1H9R0DZ01#
±2%
GRM1552C1H680GA01#
10pF
±5%
GRM1552P1H100JZ01#
±5%
GRM1552C1H680JA01#
12pF
±5%
GRM1552P1H120JZ01#
±2%
GRM1552C1H820GA01#
15pF
±5%
GRM1552P1H150JZ01#
±5%
GRM1552C1H820JA01#
18pF
±5%
GRM1552P1H180JZ01#
±2%
GRM1552C1H101GA01#
22pF
±5%
GRM1552P1H220JZ01#
±5%
GRM1552C1H101JA01#
27pF
±5%
GRM1552P1H270JZ01#
±2%
GRM1552C1H121GA01#
1.0pF
±0.25pF GRM1556R1H1R0CD01#
±5%
GRM1552C1H121JA01#
2.0pF
±0.25pF GRM1556R1H2R0CZ01#
±2%
GRM1552C1H151GA01#
3.0pF
±0.25pF GRM1556R1H3R0CZ01#
±5%
GRM1552C1H151JA01#
4.0pF
±0.25pF GRM1556R1H4R0CZ01#
180pF
±2%
GRM1552C1H181GA01#
5.0pF
±0.25pF GRM1556R1H5R0CZ01#
±5%
GRM1552C1H181JA01#
6.0pF
±0.5pF GRM1556R1H6R0DZ01#
220pF
±2%
GRM1552C1H221GA01#
7.0pF
±0.5pF GRM1556R1H7R0DZ01#
±5%
GRM1552C1H221JA01#
8.0pF
±0.5pF GRM1556R1H8R0DZ01#
±2%
GRM1552C1H271GA01#
9.0pF
±0.5pF GRM1556R1H9R0DZ01#
±5%
GRM1552C1H271JA01#
10pF
±5%
GRM1556R1H100JZ01#
±2%
GRM1552C1H331GA01#
12pF
±5%
GRM1556R1H120JZ01#
±5%
GRM1552C1H331JA01#
15pF
±5%
GRM1556R1H150JZ01#
390pF
±2%
GRM1552C1H391GA01#
18pF
±5%
GRM1556R1H180JZ01#
±5%
GRM1552C1H391JA01#
22pF
±5%
GRM1556R1H220JZ01#
470pF
±2%
GRM1552C1H471GA01#
27pF
±5%
GRM1556R1H270JZ01#
±5%
GRM1552C1H471JA01#
±5%
GRM1556R1H330JZ01#
560pF
±2%
GRM1552C1H561GA01#
±5%
GRM1552C1H561JA01#
680pF
±2%
GRM1552C1H681GA01#
RJ
3.0pF
±0.25pF GRM1553R1H3R0CZ01#
±5%
GRM1552C1H681JA01#
RH
4.0pF
±0.25pF GRM1552R1H4R0CZ01#
820pF
±2%
GRM1552C1H821GA01#
5.0pF
±0.25pF GRM1552R1H5R0CZ01#
±5%
GRM1552C1H821JA01#
6.0pF
±0.5pF GRM1552R1H6R0DZ01#
1000pF
±2%
GRM1552C1H102GA01#
7.0pF
±0.5pF GRM1552R1H7R0DZ01#
±5%
GRM1552C1H102JA01#
8.0pF
±0.5pF GRM1552R1H8R0DZ01#
1.0pF
±0.25pF GRM1556P1H1R0CZ01#
9.0pF
±0.5pF GRM1552R1H9R0DZ01#
2.0pF
±0.25pF GRM1556P1H2R0CZ01#
10pF
±5%
GRM1552R1H100JZ01#
3.0pF
±0.25pF GRM1556P1H3R0CZ01#
12pF
±5%
GRM1552R1H120JZ01#
4.0pF
±0.25pF GRM1556P1H4R0CZ01#
15pF
±5%
GRM1552R1H150JZ01#
5.0pF
±0.25pF GRM1556P1H5R0CZ01#
18pF
±5%
GRM1552R1H180JZ01#
6.0pF
±0.5pF GRM1556P1H6R0DZ01#
22pF
±5%
GRM1552R1H220JZ01#
7.0pF
±0.5pF GRM1556P1H7R0DZ01#
27pF
±5%
GRM1552R1H270JZ01#
8.0pF
±0.5pF GRM1556P1H8R0DZ01#
±5%
GRM1552R1H330JZ01#
9.0pF
±0.5pF GRM1556P1H9R0DZ01#
Capacitor Array
GNM Series
56pF
68pF
82pF
100pF
Low ESL
LLp Series
120pF
150pF
High-Q Type
GJM Series
270pF
330pF
P2H
R2H
33pF
RK
±0.25pF GRM1554P1H1R0CZ01#
1.0pF
±0.25pF GRM1554R1H1R0CD01#
2.0pF
±0.25pF GRM1554R1H2R0CZ01#
For Bonding
GMD Series
33pF
Product Information
S2H
±5%
Part Number
P2H
33pF
0.55mm 50Vdc
Cap.
Monolithic Microchip
GMA Series
CH
Tol.
High Frequency
GQM Series
For General Purpose
GRM Series
0.55mm 50Vdc
Cap.
1.0pF
±0.25pF GRM1556S1H1R0CD01#
10pF
±5%
GRM1556P1H100JZ01#
2.0pF
±0.25pF GRM1556S1H2R0CZ01#
12pF
±5%
GRM1556P1H120JZ01#
3.0pF
±0.25pF GRM1556S1H3R0CZ01#
15pF
±5%
GRM1556P1H150JZ01#
4.0pF
±0.25pF GRM1556S1H4R0CZ01#
18pF
±5%
GRM1556P1H180JZ01#
5.0pF
±0.25pF GRM1556S1H5R0CZ01#
22pF
±5%
GRM1556P1H220JZ01#
6.0pF
±0.5pF GRM1556S1H6R0DZ01#
Part number # indicates the package specification code.
46
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.0×0.5mm)
Tol.
Part Number
7.0pF
±0.5pF GRM1556S1H7R0DZ01#
5.0pF
±0.25pF GRM1552T1H5R0CD01#
8.0pF
±0.5pF GRM1556S1H8R0DZ01#
6.0pF
±0.5pF GRM1552T1H6R0DD01#
9.0pF
±0.5pF GRM1556S1H9R0DZ01#
7.0pF
±0.5pF GRM1552T1H7R0DD01#
0.55mm 50Vdc
TH
10pF
±5%
GRM1556S1H100JZ01#
8.0pF
±0.5pF GRM1552T1H8R0DD01#
12pF
±5%
GRM1556S1H120JZ01#
9.0pF
±0.5pF GRM1552T1H9R0DD01#
15pF
±5%
GRM1556S1H150JZ01#
10pF
±5%
GRM1552T1H100JD01#
18pF
±5%
GRM1556S1H180JZ01#
12pF
±5%
GRM1552T1H120JD01#
22pF
±5%
GRM1556S1H220JZ01#
15pF
±5%
GRM1552T1H150JD01#
27pF
±5%
GRM1556S1H270JZ01#
18pF
±5%
GRM1552T1H180JD01#
33pF
±5%
GRM1556S1H330JZ01#
22pF
±5%
GRM1552T1H220JD01#
±5%
GRM1556S1H390JZ01#
27pF
±5%
GRM1552T1H270JD01#
1.0pF
±0.25pF GRM1554S1H1R0CD01#
33pF
±5%
GRM1552T1H330JD01#
2.0pF
±0.25pF GRM1554S1H2R0CZ01#
39pF
±5%
GRM1552T1H390JD01#
SJ
3.0pF
±0.25pF GRM1553S1H3R0CZ01#
47pF
±5%
GRM1552T1H470JD01#
SH
4.0pF
±0.25pF GRM1552S1H4R0CZ01#
56pF
±5%
GRM1552T1H560JD01#
5.0pF
±0.25pF GRM1552S1H5R0CZ01#
68pF
±5%
GRM1552T1H680JD01#
6.0pF
±0.5pF GRM1552S1H6R0DZ01#
82pF
±5%
GRM1552T1H820JD01#
7.0pF
±0.5pF GRM1552S1H7R0DZ01#
100pF
±5%
GRM1552T1H101JD01#
8.0pF
±0.5pF GRM1552S1H8R0DZ01#
9.0pF
±0.5pF GRM1552S1H9R0DZ01#
39pF
SK
T2H
UK
1.0pF
±0.25pF GRM1554U1H1R0CZ01#
2.0pF
±0.25pF GRM1554U1H2R0CZ01#
3.0pF
±0.25pF GRM1553U1H3R0CZ01#
10pF
±5%
GRM1552S1H100JZ01#
12pF
±5%
GRM1552S1H120JZ01#
4.0pF
±0.25pF GRM1553U1H4R0CZ01#
15pF
±5%
GRM1552S1H150JZ01#
5.0pF
±0.25pF GRM1553U1H5R0CZ01#
18pF
±5%
GRM1552S1H180JZ01#
6.0pF
±0.5pF GRM1553U1H6R0DZ01#
22pF
±5%
GRM1552S1H220JZ01#
7.0pF
±0.5pF GRM1553U1H7R0DZ01#
27pF
±5%
GRM1552S1H270JZ01#
8.0pF
±0.5pF GRM1553U1H8R0DZ01#
33pF
±5%
GRM1552S1H330JZ01#
9.0pF
±0.5pF GRM1553U1H9R0DZ01#
39pF
±5%
GRM1552S1H390JZ01#
10pF
UJ
±5%
GRM1553U1H100JZ01#
1.0pF
±0.25pF GRM1556T1H1R0CD01#
12pF
±5%
GRM1553U1H120JZ01#
2.0pF
±0.25pF GRM1556T1H2R0CD01#
15pF
±5%
GRM1553U1H150JZ01#
3.0pF
±0.25pF GRM1556T1H3R0CD01#
18pF
±5%
GRM1553U1H180JZ01#
4.0pF
±0.25pF GRM1556T1H4R0CD01#
22pF
±5%
GRM1553U1H220JZ01#
5.0pF
±0.25pF GRM1556T1H5R0CD01#
27pF
±5%
GRM1553U1H270JZ01#
6.0pF
±0.5pF GRM1556T1H6R0DD01#
33pF
±5%
GRM1553U1H330JZ01#
7.0pF
±0.5pF GRM1556T1H7R0DD01#
39pF
±5%
GRM1553U1H390JZ01#
8.0pF
±0.5pF GRM1556T1H8R0DD01#
47pF
±5%
GRM1553U1H470JZ01#
9.0pF
±0.5pF GRM1556T1H9R0DD01#
56pF
±5%
GRM1553U1H560JZ01#
10pF
±5%
GRM1556T1H100JD01#
68pF
±5%
GRM1553U1H680JZ01#
12pF
±5%
GRM1556T1H120JD01#
82pF
±5%
GRM1553U1H820JZ01#
15pF
±5%
GRM1556T1H150JD01#
100pF
±5%
GRM1553U1H101JZ01#
18pF
±5%
GRM1556T1H180JD01#
120pF
±5%
GRM1553U1H121JZ01#
22pF
±5%
GRM1556T1H220JD01#
150pF
±5%
GRM1553U1H151JZ01#
27pF
±5%
GRM1556T1H270JD01#
33pF
±5%
GRM1556T1H330JD01#
39pF
±5%
47pF
180pF
±5%
GRM1553U1H181JZ01#
1200pF
±5%
GRM1551X1A122JA01#
GRM1556T1H390JD01#
1500pF
±5%
GRM1551X1A152JA01#
±5%
GRM1556T1H470JD01#
1800pF
±5%
GRM1551X1A182JA01#
56pF
±5%
GRM1556T1H560JD01#
2200pF
±5%
GRM1551X1A222JA01#
68pF
±5%
GRM1556T1H680JD01#
2700pF
±5%
GRM1551X1A272JA01#
82pF
±5%
GRM1556T1H820JD01#
3300pF
±5%
GRM1551X1A332JA01#
100pF
±5%
GRM1556T1H101JD01#
3900pF
±5%
GRM1551X1A392JA01#
4700pF
±5%
GRM1551X1A472JA01#
1200pF
±5%
GRM1557U1A122JA01#
10Vdc
SL
1.0pF
±0.25pF GRM1554T1H1R0CD01#
2.0pF
±0.25pF GRM1554T1H2R0CD01#
TJ
3.0pF
±0.25pF GRM1553T1H3R0CD01#
1500pF
±5%
GRM1557U1A152JA01#
TH
4.0pF
±0.25pF GRM1552T1H4R0CD01#
1800pF
±5%
GRM1557U1A182JA01#
TK
U2J
For General Purpose
GRM Series
Cap.
Capacitor Array
GNM Series
Rated
TC
Voltage Code
Low ESL
LLp Series
T
max.
High-Q Type
GJM Series
Part Number
High Frequency
GQM Series
S2H
Tol.
Monolithic Microchip
GMA Series
0.55mm 50Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
Part number # indicates the package specification code.
47
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.0×0.5mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.55mm 10Vdc
U2J
UJ
Part Number
T
max.
Rated
TC
Voltage Code
Cap.
0.9mm 100Vdc C0G
0.9pF
±0.1pF GRM1885C2AR90BA01#
1.0pF
±0.05pF GRM1885C2A1R0WA01#
Capacitor Array
GNM Series
Cap.
Tol.
2200pF
±5%
GRM1557U1A222JA01#
2700pF
±5%
GRM1557U1A272JA01#
3300pF
±5%
GRM1557U1A332JA01#
±0.1pF GRM1885C2A1R0BA01#
3900pF
±5%
GRM1557U1A392JA01#
±0.25pF GRM1885C2A1R0CA01#
4700pF
±5%
GRM1557U1A472JA01#
1200pF
±5%
GRM1553U1A122JA01#
±0.1pF GRM1885C2A1R1BA01#
1500pF
±5%
GRM1553U1A152JA01#
±0.25pF GRM1885C2A1R1CA01#
1800pF
±5%
GRM1553U1A182JA01#
2200pF
±5%
GRM1553U1A222JA01#
±0.1pF GRM1885C2A1R2BA01#
2700pF
±5%
GRM1553U1A272JA01#
±0.25pF GRM1885C2A1R2CA01#
3300pF
±5%
GRM1553U1A332JA01#
3900pF
±5%
GRM1553U1A392JA01#
±0.1pF GRM1885C2A1R3BA01#
4700pF
±5%
GRM1553U1A472JA01#
±0.25pF GRM1885C2A1R3CA01#
1.1pF
1.2pF
1.3pF
1.4pF
Low ESL
LLp Series
0.5mm
SL
High-Q Type
GJM Series
U2J
High Frequency
GQM Series
UJ
10Vdc
±0.05pF GRM1885C2A1R1WA01#
±0.05pF GRM1885C2A1R2WA01#
±0.05pF GRM1885C2A1R3WA01#
±0.05pF GRM1885C2A1R4WA01#
±0.25pF GRM1885C2A1R4CA01#
Rated
TC
Voltage Code
50Vdc
Part Number
±0.1pF GRM1885C2A1R4BA01#
c 1.6×0.8mm
T
max.
Tol.
SL
Monolithic Microchip
GMA Series
U2J
UJ
±0.05pF GRM1885C2A1R5WA01#
For Bonding
GMD Series
Tol.
2200pF
±5%
GRM1851X1H222JA44#
2700pF
±5%
GRM1851X1H272JA44#
3300pF
±5%
GRM1851X1H332JA44#
3900pF
±5%
GRM1851X1H392JA44#
4700pF
±5%
GRM1851X1H472JA44#
2200pF
±5%
GRM1857U1H222JA44#
±0.1pF GRM1885C2A1R7BA01#
2700pF
±5%
GRM1857U1H272JA44#
±0.25pF GRM1885C2A1R7CA01#
3300pF
±5%
GRM1857U1H332JA44#
3900pF
±5%
GRM1857U1H392JA44#
±0.1pF GRM1885C2A1R8BA01#
4700pF
±5%
GRM1857U1H472JA44#
±0.25pF GRM1885C2A1R8CA01#
2200pF
±5%
GRM1853U1H222JA44#
2700pF
±5%
GRM1853U1H272JA44#
±0.1pF GRM1885C2A1R9BA01#
3300pF
±5%
GRM1853U1H332JA44#
±0.25pF GRM1885C2A1R9CA01#
3900pF
±5%
GRM1853U1H392JA44#
4700pF
±5%
GRM1853U1H472JA44#
±0.1pF GRM1885C2A2R0BA01#
5600pF
±5%
GRM1851X1A562JA44#
±0.25pF GRM1885C2A2R0CA01#
6800pF
±5%
GRM1851X1A682JA44#
8200pF
±5%
GRM1851X1A822JA44#
±0.1pF GRM1885C2A2R1BA01#
10000pF
±5%
GRM1851X1A103JA44#
±0.25pF GRM1885C2A2R1CA01#
5600pF
±5%
GRM1857U1A562JA44#
6800pF
±5%
GRM1857U1A682JA44#
±0.1pF GRM1885C2A2R2BA01#
8200pF
±5%
GRM1857U1A822JA44#
±0.25pF GRM1885C2A2R2CA01#
10000pF
±5%
GRM1857U1A103JA44#
5600pF
±5%
GRM1853U1A562JA44#
6800pF
±5%
GRM1853U1A682JA44#
8200pF
±5%
GRM1853U1A822JA44#
±5%
GRM1853U1A103JA44#
±0.1pF GRM1885C2A1R5BA01#
10000pF
0.9mm 100Vdc C0G
Part Number
1.5pF
Cap.
0.5pF
Product Information
0.7pF
0.8pF
±0.05pF GRM1885C2A1R6WA01#
±0.1pF GRM1885C2A1R6BA01#
±0.25pF GRM1885C2A1R6CA01#
1.7pF
1.8pF
1.9pF
2.0pF
2.1pF
2.2pF
2.3pF
±0.05pF GRM1885C2A1R7WA01#
±0.05pF GRM1885C2A1R8WA01#
±0.05pF GRM1885C2A1R9WA01#
±0.05pF GRM1885C2A2R0WA01#
±0.05pF GRM1885C2A2R1WA01#
±0.05pF GRM1885C2A2R2WA01#
±0.05pF GRM1885C2A2R3WA01#
±0.1pF GRM1885C2A2R3BA01#
±0.25pF GRM1885C2A2R3CA01#
2.4pF
±0.05pF GRM1885C2A2R4WA01#
±0.1pF GRM1885C2A2R4BA01#
±0.25pF GRM1885C2A2R4CA01#
2.5pF
±0.05pF GRM1885C2A2R5WA01#
±0.05pF GRM1885C2AR60WA01#
±0.1pF GRM1885C2A2R5BA01#
±0.1pF GRM1885C2AR60BA01#
±0.25pF GRM1885C2A2R5CA01#
±0.05pF GRM1885C2AR70WA01#
2.6pF
±0.05pF GRM1885C2A2R6WA01#
±0.1pF GRM1885C2AR70BA01#
±0.1pF GRM1885C2A2R6BA01#
±0.05pF GRM1885C2AR80WA01#
±0.25pF GRM1885C2A2R6CA01#
±0.1pF GRM1885C2AR80BA01#
0.9pF
1.6pF
±0.05pF GRM1885C2AR50WA01#
±0.1pF GRM1885C2AR50BA01#
0.6pF
±0.25pF GRM1885C2A1R5CA01#
±0.05pF GRM1885C2AR90WA01#
2.7pF
±0.05pF GRM1885C2A2R7WA01#
±0.1pF GRM1885C2A2R7BA01#
Part number # indicates the package specification code.
48
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.6×0.8mm)
3.0pF
3.1pF
3.2pF
3.3pF
3.4pF
4.5pF
±0.25pF GRM1885C2A4R5CA01#
4.6pF
±0.05pF GRM1885C2A4R6WA01#
±0.1pF GRM1885C2A4R6BA01#
±0.25pF GRM1885C2A2R8CA01#
±0.25pF GRM1885C2A4R6CA01#
±0.05pF GRM1885C2A2R9WA01#
4.7pF
±0.1pF GRM1885C2A2R9BA01#
±0.1pF GRM1885C2A4R7BA01#
±0.25pF GRM1885C2A4R7CA01#
±0.05pF GRM1885C2A3R0WA01#
4.8pF
±0.1pF GRM1885C2A4R8BA01#
±0.25pF GRM1885C2A3R0CA01#
±0.25pF GRM1885C2A4R8CA01#
±0.05pF GRM1885C2A3R1WA01#
4.9pF
±0.1pF GRM1885C2A4R9BA01#
±0.25pF GRM1885C2A3R1CA01#
±0.25pF GRM1885C2A4R9CA01#
±0.05pF GRM1885C2A3R2WA01#
5.0pF
±0.1pF GRM1885C2A5R0BA01#
±0.25pF GRM1885C2A3R2CA01#
±0.25pF GRM1885C2A5R0CA01#
±0.05pF GRM1885C2A3R3WA01#
5.1pF
±0.1pF GRM1885C2A5R1BA01#
±0.25pF GRM1885C2A3R3CA01#
±0.25pF GRM1885C2A5R1CA01#
±0.05pF GRM1885C2A3R4WA01#
±0.5pF GRM1885C2A5R1DA01#
5.2pF
±0.25pF GRM1885C2A3R4CA01#
±0.1pF GRM1885C2A5R2BA01#
±0.25pF GRM1885C2A5R2CA01#
±0.5pF GRM1885C2A5R2DA01#
5.3pF
±0.1pF GRM1885C2A5R3BA01#
±0.1pF GRM1885C2A3R6BA01#
±0.25pF GRM1885C2A5R3CA01#
±0.05pF GRM1885C2A3R7WA01#
±0.5pF GRM1885C2A5R3DA01#
5.4pF
±0.1pF GRM1885C2A3R7BA01#
±0.1pF GRM1885C2A5R4BA01#
±0.25pF GRM1885C2A5R4CA01#
±0.05pF GRM1885C2A3R8WA01#
±0.5pF GRM1885C2A5R4DA01#
5.5pF
±0.25pF GRM1885C2A3R8CA01#
±0.1pF GRM1885C2A5R5BA01#
±0.25pF GRM1885C2A5R5CA01#
±0.5pF GRM1885C2A5R5DA01#
5.6pF
±0.05pF GRM1885C2A5R6WA01#
±0.05pF GRM1885C2A4R0WA01#
±0.1pF GRM1885C2A5R6BA01#
±0.1pF GRM1885C2A4R0BA01#
±0.25pF GRM1885C2A5R6CA01#
±0.05pF GRM1885C2A4R1WA01#
±0.5pF GRM1885C2A5R6DA01#
5.7pF
±0.05pF GRM1885C2A5R7WA01#
±0.1pF GRM1885C2A4R1BA01#
±0.1pF GRM1885C2A5R7BA01#
±0.25pF GRM1885C2A4R1CA01#
±0.25pF GRM1885C2A5R7CA01#
±0.05pF GRM1885C2A4R2WA01#
±0.5pF GRM1885C2A5R7DA01#
5.8pF
±0.05pF GRM1885C2A5R8WA01#
±0.25pF GRM1885C2A4R2CA01#
±0.1pF GRM1885C2A5R8BA01#
±0.05pF GRM1885C2A4R3WA01#
±0.25pF GRM1885C2A5R8CA01#
±0.1pF GRM1885C2A4R3BA01#
±0.5pF GRM1885C2A5R8DA01#
5.9pF
±0.05pF GRM1885C2A5R9WA01#
±0.05pF GRM1885C2A4R4WA01#
±0.1pF GRM1885C2A5R9BA01#
±0.1pF GRM1885C2A4R4BA01#
±0.25pF GRM1885C2A5R9CA01#
±0.5pF GRM1885C2A5R9DA01#
±0.25pF GRM1885C2A4R4CA01#
4.5pF
±0.05pF GRM1885C2A5R5WA01#
±0.05pF GRM1885C2A3R9WA01#
±0.25pF GRM1885C2A4R3CA01#
4.4pF
±0.05pF GRM1885C2A5R4WA01#
±0.25pF GRM1885C2A3R7CA01#
±0.1pF GRM1885C2A4R2BA01#
4.3pF
±0.05pF GRM1885C2A5R3WA01#
±0.05pF GRM1885C2A3R6WA01#
±0.25pF GRM1885C2A4R0CA01#
4.2pF
±0.05pF GRM1885C2A5R2WA01#
±0.05pF GRM1885C2A3R5WA01#
±0.1pF GRM1885C2A3R9BA01#
4.1pF
±0.05pF GRM1885C2A5R1WA01#
±0.1pF GRM1885C2A3R3BA01#
±0.25pF GRM1885C2A3R9CA01#
4.0pF
±0.05pF GRM1885C2A5R0WA01#
±0.1pF GRM1885C2A3R2BA01#
±0.1pF GRM1885C2A3R8BA01#
3.9pF
±0.05pF GRM1885C2A4R9WA01#
±0.1pF GRM1885C2A3R1BA01#
±0.25pF GRM1885C2A3R6CA01#
3.8pF
±0.05pF GRM1885C2A4R8WA01#
±0.1pF GRM1885C2A3R0BA01#
±0.1pF GRM1885C2A3R5BA01#
3.7pF
±0.05pF GRM1885C2A4R7WA01#
±0.25pF GRM1885C2A2R9CA01#
±0.25pF GRM1885C2A3R5CA01#
3.6pF
Part Number
±0.1pF GRM1885C2A2R8BA01#
±0.1pF GRM1885C2A3R4BA01#
3.5pF
0.9mm 100Vdc C0G
Tol.
±0.05pF GRM1885C2A4R5WA01#
±0.1pF GRM1885C2A4R5BA01#
For General Purpose
GRM Series
2.9pF
Cap.
Capacitor Array
GNM Series
±0.05pF GRM1885C2A2R8WA01#
Rated
TC
Voltage Code
Low ESL
LLp Series
±0.25pF GRM1885C2A2R7CA01#
2.8pF
T
max.
High-Q Type
GJM Series
2.7pF
Part Number
High Frequency
GQM Series
0.9mm 100Vdc C0G
Tol.
Monolithic Microchip
GMA Series
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
6.0pF
±0.05pF GRM1885C2A6R0WA01#
±0.1pF GRM1885C2A6R0BA01#
Part number # indicates the package specification code.
49
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.6×0.8mm)
T
max.
For General Purpose
GRM Series
Rated
TC
Voltage Code
Cap.
0.9mm 100Vdc C0G
6.0pF
6.1pF
Tol.
Part Number
±0.25pF GRM1885C2A6R0CA01#
T
max.
Rated
TC
Voltage Code
Cap.
0.9mm 100Vdc C0G
7.4pF
±0.1pF GRM1885C2A7R4BA01#
±0.25pF GRM1885C2A7R4CA01#
±0.5pF GRM1885C2A7R4DA01#
7.5pF
±0.5pF GRM1885C2A6R1DA01#
±0.1pF GRM1885C2A7R5BA01#
±0.25pF GRM1885C2A7R5CA01#
±0.1pF GRM1885C2A6R2BA01#
±0.5pF GRM1885C2A7R5DA01#
Capacitor Array
GNM Series
7.6pF
±0.1pF GRM1885C2A7R6BA01#
±0.05pF GRM1885C2A6R3WA01#
±0.25pF GRM1885C2A7R6CA01#
±0.25pF GRM1885C2A6R3CA01#
±0.5pF GRM1885C2A7R6DA01#
7.7pF
Low ESL
LLp Series
±0.5pF GRM1885C2A6R3DA01#
±0.1pF GRM1885C2A7R7BA01#
±0.25pF GRM1885C2A7R7CA01#
±0.1pF GRM1885C2A6R4BA01#
±0.5pF GRM1885C2A7R7DA01#
7.8pF
±0.1pF GRM1885C2A7R8BA01#
±0.05pF GRM1885C2A6R5WA01#
±0.25pF GRM1885C2A7R8CA01#
±0.1pF GRM1885C2A6R5BA01#
±0.5pF GRM1885C2A7R8DA01#
7.9pF
High-Q Type
GJM Series
±0.5pF GRM1885C2A6R5DA01#
±0.1pF GRM1885C2A7R9BA01#
±0.25pF GRM1885C2A7R9CA01#
±0.1pF GRM1885C2A6R6BA01#
±0.5pF GRM1885C2A7R9DA01#
8.0pF
±0.1pF GRM1885C2A8R0BA01#
±0.05pF GRM1885C2A6R7WA01#
±0.25pF GRM1885C2A8R0CA01#
High Frequency
GQM Series
±0.25pF GRM1885C2A6R7CA01#
±0.5pF GRM1885C2A8R0DA01#
8.1pF
±0.5pF GRM1885C2A6R7DA01#
±0.1pF GRM1885C2A8R1BA01#
±0.25pF GRM1885C2A8R1CA01#
±0.1pF GRM1885C2A6R8BA01#
±0.5pF GRM1885C2A8R1DA01#
8.2pF
Monolithic Microchip
GMA Series
±0.5pF GRM1885C2A6R8DA01#
±0.1pF GRM1885C2A8R2BA01#
±0.25pF GRM1885C2A8R2CA01#
±0.1pF GRM1885C2A6R9BA01#
±0.5pF GRM1885C2A8R2DA01#
8.3pF
±0.5pF GRM1885C2A6R9DA01#
±0.1pF GRM1885C2A8R3BA01#
±0.25pF GRM1885C2A8R3CA01#
±0.1pF GRM1885C2A7R0BA01#
±0.5pF GRM1885C2A8R3DA01#
8.4pF
±0.05pF GRM1885C2A8R4WA01#
For Bonding
GMD Series
±0.5pF GRM1885C2A7R0DA01#
±0.1pF GRM1885C2A8R4BA01#
±0.05pF GRM1885C2A7R1WA01#
±0.25pF GRM1885C2A8R4CA01#
±0.1pF GRM1885C2A7R1BA01#
±0.25pF GRM1885C2A7R1CA01#
±0.5pF GRM1885C2A8R4DA01#
8.5pF
±0.05pF GRM1885C2A8R5WA01#
±0.5pF GRM1885C2A7R1DA01#
±0.1pF GRM1885C2A8R5BA01#
±0.05pF GRM1885C2A7R2WA01#
±0.25pF GRM1885C2A8R5CA01#
±0.1pF GRM1885C2A7R2BA01#
Product Information
±0.25pF GRM1885C2A7R2CA01#
7.3pF
±0.05pF GRM1885C2A8R3WA01#
±0.05pF GRM1885C2A7R0WA01#
±0.25pF GRM1885C2A7R0CA01#
7.2pF
±0.05pF GRM1885C2A8R2WA01#
±0.05pF GRM1885C2A6R9WA01#
±0.25pF GRM1885C2A6R9CA01#
7.1pF
±0.05pF GRM1885C2A8R1WA01#
±0.05pF GRM1885C2A6R8WA01#
±0.25pF GRM1885C2A6R8CA01#
7.0pF
±0.05pF GRM1885C2A8R0WA01#
±0.5pF GRM1885C2A6R6DA01#
±0.1pF GRM1885C2A6R7BA01#
6.9pF
±0.05pF GRM1885C2A7R9WA01#
±0.05pF GRM1885C2A6R6WA01#
±0.25pF GRM1885C2A6R6CA01#
6.8pF
±0.05pF GRM1885C2A7R8WA01#
±0.5pF GRM1885C2A6R4DA01#
±0.25pF GRM1885C2A6R5CA01#
6.7pF
±0.05pF GRM1885C2A7R7WA01#
±0.05pF GRM1885C2A6R4WA01#
±0.25pF GRM1885C2A6R4CA01#
6.6pF
±0.05pF GRM1885C2A7R6WA01#
±0.5pF GRM1885C2A6R2DA01#
±0.1pF GRM1885C2A6R3BA01#
6.5pF
±0.05pF GRM1885C2A7R5WA01#
±0.05pF GRM1885C2A6R2WA01#
±0.25pF GRM1885C2A6R2CA01#
6.4pF
±0.05pF GRM1885C2A7R4WA01#
±0.05pF GRM1885C2A6R1WA01#
±0.1pF GRM1885C2A6R1BA01#
6.3pF
Part Number
±0.5pF GRM1885C2A6R0DA01#
±0.25pF GRM1885C2A6R1CA01#
6.2pF
Tol.
±0.5pF GRM1885C2A8R5DA01#
8.6pF
±0.05pF GRM1885C2A8R6WA01#
±0.5pF GRM1885C2A7R2DA01#
±0.1pF GRM1885C2A8R6BA01#
±0.05pF GRM1885C2A7R3WA01#
±0.25pF GRM1885C2A8R6CA01#
±0.5pF GRM1885C2A8R6DA01#
±0.1pF GRM1885C2A7R3BA01#
±0.25pF GRM1885C2A7R3CA01#
±0.5pF GRM1885C2A7R3DA01#
8.7pF
±0.05pF GRM1885C2A8R7WA01#
±0.1pF GRM1885C2A8R7BA01#
Part number # indicates the package specification code.
50
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.6×0.8mm)
9.0pF
9.1pF
9.2pF
9.3pF
Tol.
0.9mm 100Vdc C0G
22pF
±5%
GRM1885C2A220JA01#
±0.5pF GRM1885C2A8R7DA01#
27pF
±5%
GRM1885C2A270JA01#
±0.05pF GRM1885C2A8R8WA01#
33pF
±5%
GRM1885C2A330JA01#
±0.1pF GRM1885C2A8R8BA01#
39pF
±5%
GRM1885C2A390JA01#
±0.25pF GRM1885C2A8R8CA01#
47pF
±5%
GRM1885C2A470JA01#
±0.5pF GRM1885C2A8R8DA01#
56pF
±5%
GRM1885C2A560JA01#
±0.05pF GRM1885C2A8R9WA01#
68pF
±5%
GRM1885C2A680JA01#
±0.1pF GRM1885C2A8R9BA01#
82pF
±5%
GRM1885C2A820JA01#
±0.25pF GRM1885C2A8R9CA01#
100pF
±5%
GRM1885C2A101JA01#
±0.5pF GRM1885C2A8R9DA01#
120pF
±5%
GRM1885C2A121JA01#
±0.05pF GRM1885C2A9R0WA01#
150pF
±5%
GRM1885C2A151JA01#
±0.1pF GRM1885C2A9R0BA01#
180pF
±5%
GRM1885C2A181JA01#
±0.25pF GRM1885C2A9R0CA01#
220pF
±5%
GRM1885C2A221JA01#
±0.5pF GRM1885C2A9R0DA01#
270pF
±5%
GRM1885C2A271JA01#
±0.05pF GRM1885C2A9R1WA01#
330pF
±5%
GRM1885C2A331JA01#
±0.1pF GRM1885C2A9R1BA01#
390pF
±5%
GRM1885C2A391JA01#
±0.25pF GRM1885C2A9R1CA01#
470pF
±5%
GRM1885C2A471JA01#
±0.5pF GRM1885C2A9R1DA01#
560pF
±5%
GRM1885C2A561JA01#
±0.05pF GRM1885C2A9R2WA01#
680pF
±5%
GRM1885C2A681JA01#
±0.1pF GRM1885C2A9R2BA01#
820pF
±5%
GRM1885C2A821JA01#
±0.25pF GRM1885C2A9R2CA01#
1000pF
±5%
GRM1885C2A102JA01#
±0.5pF GRM1885C2A9R2DA01#
1200pF
±5%
GRM1885C2A122JA01#
±0.05pF GRM1885C2A9R3WA01#
1500pF
±5%
GRM1885C2A152JA01#
±0.1pF GRM1885C2A9R3BA01#
CK
0.5pF
±0.05pF GRM1884C2AR50WA01#
0.6pF
±0.05pF GRM1884C2AR60WA01#
0.7pF
±0.05pF GRM1884C2AR70WA01#
0.8pF
±0.05pF GRM1884C2AR80WA01#
±0.25pF GRM1885C2A9R3CA01#
±0.5pF GRM1885C2A9R3DA01#
9.4pF
±0.1pF GRM1884C2AR50BA01#
±0.05pF GRM1885C2A9R4WA01#
±0.1pF GRM1885C2A9R4BA01#
±0.1pF GRM1884C2AR60BA01#
±0.25pF GRM1885C2A9R4CA01#
±0.5pF GRM1885C2A9R4DA01#
9.5pF
±0.1pF GRM1884C2AR70BA01#
±0.05pF GRM1885C2A9R5WA01#
±0.1pF GRM1885C2A9R5BA01#
±0.1pF GRM1884C2AR80BA01#
0.9pF
±0.05pF GRM1884C2AR90WA01#
1.0pF
±0.05pF GRM1884C2A1R0WA01#
±0.25pF GRM1885C2A9R5CA01#
±0.5pF GRM1885C2A9R5DA01#
9.6pF
±0.1pF GRM1884C2A1R0BA01#
±0.1pF GRM1885C2A9R6BA01#
±0.25pF GRM1884C2A1R0CA01#
±0.05pF GRM1884C2A1R1WA01#
±0.5pF GRM1885C2A9R6DA01#
±0.1pF GRM1884C2A1R1BA01#
±0.25pF GRM1884C2A1R1CA01#
1.2pF
±0.05pF GRM1884C2A1R2WA01#
±0.25pF GRM1885C2A9R7CA01#
±0.1pF GRM1884C2A1R2BA01#
±0.5pF GRM1885C2A9R7DA01#
±0.25pF GRM1884C2A1R2CA01#
±0.05pF GRM1885C2A9R8WA01#
1.3pF
±0.05pF GRM1884C2A1R3WA01#
±0.1pF GRM1885C2A9R8BA01#
±0.1pF GRM1884C2A1R3BA01#
±0.25pF GRM1885C2A9R8CA01#
±0.25pF GRM1884C2A1R3CA01#
±0.5pF GRM1885C2A9R8DA01#
9.9pF
1.1pF
±0.05pF GRM1885C2A9R7WA01#
±0.1pF GRM1885C2A9R7BA01#
9.8pF
±0.1pF GRM1884C2AR90BA01#
±0.05pF GRM1885C2A9R6WA01#
±0.25pF GRM1885C2A9R6CA01#
9.7pF
Part Number
1.4pF
±0.05pF GRM1885C2A9R9WA01#
±0.25pF GRM1884C2A1R4CA01#
1.5pF
±5%
GRM1885C2A100JA01#
12pF
±5%
GRM1885C2A120JA01#
15pF
±5%
GRM1885C2A150JA01#
18pF
±5%
GRM1885C2A180JA01#
±0.05pF GRM1884C2A1R5WA01#
±0.1pF GRM1884C2A1R5BA01#
±0.5pF GRM1885C2A9R9DA01#
10pF
±0.05pF GRM1884C2A1R4WA01#
±0.1pF GRM1884C2A1R4BA01#
±0.1pF GRM1885C2A9R9BA01#
±0.25pF GRM1885C2A9R9CA01#
For General Purpose
GRM Series
Cap.
Capacitor Array
GNM Series
8.9pF
Rated
TC
Voltage Code
Low ESL
LLp Series
8.8pF
±0.25pF GRM1885C2A8R7CA01#
T
max.
High-Q Type
GJM Series
8.7pF
Part Number
High Frequency
GQM Series
0.9mm 100Vdc C0G
Tol.
Monolithic Microchip
GMA Series
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
±0.25pF GRM1884C2A1R5CA01#
1.6pF
±0.05pF GRM1884C2A1R6WA01#
±0.1pF GRM1884C2A1R6BA01#
±0.25pF GRM1884C2A1R6CA01#
Part number # indicates the package specification code.
51
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.6×0.8mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.9mm 100Vdc
CK
Cap.
1.7pF
1.8pF
Tol.
Part Number
±0.05pF GRM1884C2A1R7WA01#
T
max.
Rated
TC
Voltage Code
0.9mm 100Vdc
CJ
Cap.
3.5pF
Capacitor Array
GNM Series
CJ
2.1pF
Low ESL
LLp Series
2.2pF
2.3pF
2.4pF
High-Q Type
GJM Series
2.5pF
±0.1pF GRM1883C2A3R5BA01#
±0.25pF GRM1883C2A3R5CA01#
±0.05pF GRM1884C2A1R8WA01#
3.6pF
±0.25pF GRM1883C2A3R6CA01#
±0.05pF GRM1884C2A1R9WA01#
3.7pF
High Frequency
GQM Series
2.8pF
Monolithic Microchip
GMA Series
2.9pF
3.0pF
For Bonding
GMD Series
3.1pF
3.2pF
±0.1pF GRM1884C2A1R9BA01#
±0.1pF GRM1883C2A3R7BA01#
±0.25pF GRM1883C2A3R7CA01#
±0.05pF GRM1884C2A2R0WA01#
3.8pF
±0.1pF GRM1884C2A2R0BA01#
±0.1pF GRM1883C2A3R8BA01#
±0.25pF GRM1883C2A3R8CA01#
±0.05pF GRM1883C2A2R1WA01#
3.9pF
±0.05pF GRM1883C2A3R9WA01#
±0.1pF GRM1883C2A2R1BA01#
±0.1pF GRM1883C2A3R9BA01#
±0.25pF GRM1883C2A2R1CA01#
±0.25pF GRM1883C2A3R9CA01#
±0.05pF GRM1883C2A2R2WA01#
CH
4.0pF
±0.05pF GRM1882C2A4R0WA01#
±0.1pF GRM1883C2A2R2BA01#
±0.1pF GRM1882C2A4R0BA01#
±0.25pF GRM1883C2A2R2CA01#
±0.25pF GRM1882C2A4R0CA01#
±0.05pF GRM1883C2A2R3WA01#
4.1pF
±0.05pF GRM1882C2A4R1WA01#
±0.1pF GRM1883C2A2R3BA01#
±0.1pF GRM1882C2A4R1BA01#
±0.25pF GRM1883C2A2R3CA01#
±0.25pF GRM1882C2A4R1CA01#
±0.05pF GRM1883C2A2R4WA01#
4.2pF
±0.05pF GRM1882C2A4R2WA01#
±0.1pF GRM1883C2A2R4BA01#
±0.1pF GRM1882C2A4R2BA01#
±0.25pF GRM1883C2A2R4CA01#
±0.25pF GRM1882C2A4R2CA01#
±0.05pF GRM1883C2A2R5WA01#
4.3pF
±0.05pF GRM1883C2A2R6WA01#
±0.05pF GRM1882C2A4R3WA01#
±0.1pF GRM1882C2A4R3BA01#
±0.25pF GRM1882C2A4R3CA01#
4.4pF
±0.05pF GRM1882C2A4R4WA01#
±0.1pF GRM1883C2A2R6BA01#
±0.1pF GRM1882C2A4R4BA01#
±0.25pF GRM1883C2A2R6CA01#
±0.25pF GRM1882C2A4R4CA01#
±0.05pF GRM1883C2A2R7WA01#
4.5pF
±0.05pF GRM1882C2A4R5WA01#
±0.1pF GRM1883C2A2R7BA01#
±0.1pF GRM1882C2A4R5BA01#
±0.25pF GRM1883C2A2R7CA01#
±0.25pF GRM1882C2A4R5CA01#
±0.05pF GRM1883C2A2R8WA01#
4.6pF
±0.05pF GRM1882C2A4R6WA01#
±0.1pF GRM1883C2A2R8BA01#
±0.1pF GRM1882C2A4R6BA01#
±0.25pF GRM1883C2A2R8CA01#
±0.25pF GRM1882C2A4R6CA01#
±0.05pF GRM1883C2A2R9WA01#
4.7pF
±0.05pF GRM1882C2A4R7WA01#
±0.1pF GRM1883C2A2R9BA01#
±0.1pF GRM1882C2A4R7BA01#
±0.25pF GRM1883C2A2R9CA01#
±0.25pF GRM1882C2A4R7CA01#
±0.05pF GRM1883C2A3R0WA01#
4.8pF
±0.05pF GRM1882C2A4R8WA01#
±0.1pF GRM1883C2A3R0BA01#
±0.1pF GRM1882C2A4R8BA01#
±0.25pF GRM1883C2A3R0CA01#
±0.25pF GRM1882C2A4R8CA01#
±0.05pF GRM1883C2A3R1WA01#
4.9pF
±0.05pF GRM1882C2A4R9WA01#
±0.1pF GRM1883C2A3R1BA01#
±0.1pF GRM1882C2A4R9BA01#
±0.25pF GRM1883C2A3R1CA01#
±0.25pF GRM1882C2A4R9CA01#
±0.05pF GRM1883C2A3R2WA01#
5.0pF
Product Information
±0.05pF GRM1883C2A3R3WA01#
±0.05pF GRM1882C2A5R0WA01#
±0.1pF GRM1882C2A5R0BA01#
±0.25pF GRM1883C2A3R2CA01#
3.4pF
±0.05pF GRM1883C2A3R8WA01#
±0.25pF GRM1884C2A2R0CA01#
±0.1pF GRM1883C2A3R2BA01#
3.3pF
±0.05pF GRM1883C2A3R7WA01#
±0.25pF GRM1884C2A1R9CA01#
±0.25pF GRM1883C2A2R5CA01#
2.7pF
±0.05pF GRM1883C2A3R6WA01#
±0.1pF GRM1883C2A3R6BA01#
±0.1pF GRM1883C2A2R5BA01#
2.6pF
±0.05pF GRM1883C2A3R5WA01#
±0.25pF GRM1884C2A1R7CA01#
±0.25pF GRM1884C2A1R8CA01#
2.0pF
Part Number
±0.1pF GRM1884C2A1R7BA01#
±0.1pF GRM1884C2A1R8BA01#
1.9pF
Tol.
±0.25pF GRM1882C2A5R0CA01#
5.1pF
±0.05pF GRM1882C2A5R1WA01#
±0.1pF GRM1883C2A3R3BA01#
±0.1pF GRM1882C2A5R1BA01#
±0.25pF GRM1883C2A3R3CA01#
±0.25pF GRM1882C2A5R1CA01#
±0.05pF GRM1883C2A3R4WA01#
±0.1pF GRM1883C2A3R4BA01#
±0.25pF GRM1883C2A3R4CA01#
±0.5pF GRM1882C2A5R1DA01#
5.2pF
±0.05pF GRM1882C2A5R2WA01#
±0.1pF GRM1882C2A5R2BA01#
Part number # indicates the package specification code.
52
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.6×0.8mm)
CH
6.6pF
±0.1pF GRM1882C2A6R6BA01#
±0.25pF GRM1882C2A6R6CA01#
±0.5pF GRM1882C2A6R6DA01#
6.7pF
±0.5pF GRM1882C2A5R3DA01#
±0.1pF GRM1882C2A6R7BA01#
±0.25pF GRM1882C2A6R7CA01#
±0.1pF GRM1882C2A5R4BA01#
±0.5pF GRM1882C2A6R7DA01#
6.8pF
±0.1pF GRM1882C2A6R8BA01#
±0.05pF GRM1882C2A5R5WA01#
±0.25pF GRM1882C2A6R8CA01#
±0.25pF GRM1882C2A5R5CA01#
±0.5pF GRM1882C2A6R8DA01#
6.9pF
±0.5pF GRM1882C2A5R5DA01#
±0.1pF GRM1882C2A6R9BA01#
±0.25pF GRM1882C2A6R9CA01#
±0.1pF GRM1882C2A5R6BA01#
±0.5pF GRM1882C2A6R9DA01#
7.0pF
±0.1pF GRM1882C2A7R0BA01#
±0.05pF GRM1882C2A5R7WA01#
±0.25pF GRM1882C2A7R0CA01#
±0.1pF GRM1882C2A5R7BA01#
±0.5pF GRM1882C2A7R0DA01#
7.1pF
±0.5pF GRM1882C2A5R7DA01#
±0.1pF GRM1882C2A7R1BA01#
±0.25pF GRM1882C2A7R1CA01#
±0.1pF GRM1882C2A5R8BA01#
±0.5pF GRM1882C2A7R1DA01#
7.2pF
±0.1pF GRM1882C2A7R2BA01#
±0.05pF GRM1882C2A5R9WA01#
±0.25pF GRM1882C2A7R2CA01#
±0.25pF GRM1882C2A5R9CA01#
±0.5pF GRM1882C2A7R2DA01#
7.3pF
±0.5pF GRM1882C2A5R9DA01#
±0.1pF GRM1882C2A7R3BA01#
±0.25pF GRM1882C2A7R3CA01#
±0.1pF GRM1882C2A6R0BA01#
±0.5pF GRM1882C2A7R3DA01#
7.4pF
±0.5pF GRM1882C2A6R0DA01#
±0.1pF GRM1882C2A7R4BA01#
±0.25pF GRM1882C2A7R4CA01#
±0.1pF GRM1882C2A6R1BA01#
±0.5pF GRM1882C2A7R4DA01#
7.5pF
±0.5pF GRM1882C2A6R1DA01#
±0.1pF GRM1882C2A7R5BA01#
±0.25pF GRM1882C2A7R5CA01#
±0.1pF GRM1882C2A6R2BA01#
±0.5pF GRM1882C2A7R5DA01#
7.6pF
±0.05pF GRM1882C2A7R6WA01#
±0.5pF GRM1882C2A6R2DA01#
±0.1pF GRM1882C2A7R6BA01#
±0.05pF GRM1882C2A6R3WA01#
±0.25pF GRM1882C2A7R6CA01#
±0.1pF GRM1882C2A6R3BA01#
±0.25pF GRM1882C2A6R3CA01#
±0.5pF GRM1882C2A7R6DA01#
7.7pF
±0.05pF GRM1882C2A7R7WA01#
±0.5pF GRM1882C2A6R3DA01#
±0.1pF GRM1882C2A7R7BA01#
±0.05pF GRM1882C2A6R4WA01#
±0.25pF GRM1882C2A7R7CA01#
±0.1pF GRM1882C2A6R4BA01#
±0.25pF GRM1882C2A6R4CA01#
6.5pF
±0.05pF GRM1882C2A7R5WA01#
±0.05pF GRM1882C2A6R2WA01#
±0.25pF GRM1882C2A6R2CA01#
6.4pF
±0.05pF GRM1882C2A7R4WA01#
±0.05pF GRM1882C2A6R1WA01#
±0.25pF GRM1882C2A6R1CA01#
6.3pF
±0.05pF GRM1882C2A7R3WA01#
±0.05pF GRM1882C2A6R0WA01#
±0.25pF GRM1882C2A6R0CA01#
6.2pF
±0.05pF GRM1882C2A7R2WA01#
±0.5pF GRM1882C2A5R8DA01#
±0.1pF GRM1882C2A5R9BA01#
6.1pF
±0.05pF GRM1882C2A7R1WA01#
±0.05pF GRM1882C2A5R8WA01#
±0.25pF GRM1882C2A5R8CA01#
6.0pF
±0.05pF GRM1882C2A7R0WA01#
±0.5pF GRM1882C2A5R6DA01#
±0.25pF GRM1882C2A5R7CA01#
5.9pF
±0.05pF GRM1882C2A6R9WA01#
±0.05pF GRM1882C2A5R6WA01#
±0.25pF GRM1882C2A5R6CA01#
5.8pF
±0.05pF GRM1882C2A6R8WA01#
±0.5pF GRM1882C2A5R4DA01#
±0.1pF GRM1882C2A5R5BA01#
5.7pF
±0.05pF GRM1882C2A6R7WA01#
±0.05pF GRM1882C2A5R4WA01#
±0.25pF GRM1882C2A5R4CA01#
5.6pF
±0.05pF GRM1882C2A6R6WA01#
±0.05pF GRM1882C2A5R3WA01#
±0.1pF GRM1882C2A5R3BA01#
5.5pF
Part Number
±0.5pF GRM1882C2A5R2DA01#
±0.25pF GRM1882C2A5R3CA01#
5.4pF
Tol.
±0.5pF GRM1882C2A7R7DA01#
7.8pF
±0.05pF GRM1882C2A7R8WA01#
±0.5pF GRM1882C2A6R4DA01#
±0.1pF GRM1882C2A7R8BA01#
±0.05pF GRM1882C2A6R5WA01#
±0.25pF GRM1882C2A7R8CA01#
±0.5pF GRM1882C2A7R8DA01#
±0.1pF GRM1882C2A6R5BA01#
±0.25pF GRM1882C2A6R5CA01#
±0.5pF GRM1882C2A6R5DA01#
For General Purpose
GRM Series
0.9mm 100Vdc
Cap.
Capacitor Array
GNM Series
Rated
TC
Voltage Code
Low ESL
LLp Series
5.3pF
±0.25pF GRM1882C2A5R2CA01#
T
max.
High-Q Type
GJM Series
5.2pF
Part Number
High Frequency
GQM Series
CH
Tol.
Monolithic Microchip
GMA Series
0.9mm 100Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
7.9pF
±0.05pF GRM1882C2A7R9WA01#
±0.1pF GRM1882C2A7R9BA01#
Part number # indicates the package specification code.
53
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.6×0.8mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.9mm 100Vdc
CH
Cap.
7.9pF
8.0pF
Tol.
Part Number
±0.25pF GRM1882C2A7R9CA01#
T
max.
Rated
TC
Voltage Code
0.9mm 100Vdc
CH
Cap.
9.3pF
±0.1pF GRM1882C2A9R3BA01#
±0.25pF GRM1882C2A9R3CA01#
±0.5pF GRM1882C2A9R3DA01#
9.4pF
±0.5pF GRM1882C2A8R0DA01#
±0.1pF GRM1882C2A9R4BA01#
±0.25pF GRM1882C2A9R4CA01#
±0.1pF GRM1882C2A8R1BA01#
±0.5pF GRM1882C2A9R4DA01#
Capacitor Array
GNM Series
9.5pF
±0.1pF GRM1882C2A9R5BA01#
±0.05pF GRM1882C2A8R2WA01#
±0.25pF GRM1882C2A9R5CA01#
±0.25pF GRM1882C2A8R2CA01#
±0.5pF GRM1882C2A9R5DA01#
9.6pF
Low ESL
LLp Series
±0.5pF GRM1882C2A8R2DA01#
±0.1pF GRM1882C2A9R6BA01#
±0.25pF GRM1882C2A9R6CA01#
±0.1pF GRM1882C2A8R3BA01#
±0.5pF GRM1882C2A9R6DA01#
9.7pF
±0.1pF GRM1882C2A9R7BA01#
±0.05pF GRM1882C2A8R4WA01#
±0.25pF GRM1882C2A9R7CA01#
±0.1pF GRM1882C2A8R4BA01#
±0.5pF GRM1882C2A9R7DA01#
9.8pF
High-Q Type
GJM Series
±0.5pF GRM1882C2A8R4DA01#
±0.1pF GRM1882C2A9R8BA01#
±0.25pF GRM1882C2A9R8CA01#
±0.1pF GRM1882C2A8R5BA01#
±0.5pF GRM1882C2A9R8DA01#
9.9pF
High Frequency
GQM Series
Monolithic Microchip
GMA Series
8.9pF
For Bonding
GMD Series
9.0pF
9.1pF
Product Information
9.2pF
±0.05pF GRM1882C2A9R9WA01#
±0.5pF GRM1882C2A8R5DA01#
±0.1pF GRM1882C2A9R9BA01#
±0.05pF GRM1882C2A8R6WA01#
±0.25pF GRM1882C2A9R9CA01#
±0.1pF GRM1882C2A8R6BA01#
8.8pF
±0.05pF GRM1882C2A9R8WA01#
±0.05pF GRM1882C2A8R5WA01#
±0.25pF GRM1882C2A8R5CA01#
8.7pF
±0.05pF GRM1882C2A9R7WA01#
±0.5pF GRM1882C2A8R3DA01#
±0.25pF GRM1882C2A8R4CA01#
8.6pF
±0.05pF GRM1882C2A9R6WA01#
±0.05pF GRM1882C2A8R3WA01#
±0.25pF GRM1882C2A8R3CA01#
8.5pF
±0.05pF GRM1882C2A9R5WA01#
±0.5pF GRM1882C2A8R1DA01#
±0.1pF GRM1882C2A8R2BA01#
8.4pF
±0.05pF GRM1882C2A9R4WA01#
±0.05pF GRM1882C2A8R1WA01#
±0.25pF GRM1882C2A8R1CA01#
8.3pF
±0.05pF GRM1882C2A9R3WA01#
±0.05pF GRM1882C2A8R0WA01#
±0.1pF GRM1882C2A8R0BA01#
8.2pF
Part Number
±0.5pF GRM1882C2A7R9DA01#
±0.25pF GRM1882C2A8R0CA01#
8.1pF
Tol.
±0.5pF GRM1882C2A9R9DA01#
±0.25pF GRM1882C2A8R6CA01#
10pF
±5%
GRM1882C2A100JA01#
±0.5pF GRM1882C2A8R6DA01#
12pF
±5%
GRM1882C2A120JA01#
±0.05pF GRM1882C2A8R7WA01#
15pF
±5%
GRM1882C2A150JA01#
±0.1pF GRM1882C2A8R7BA01#
18pF
±5%
GRM1882C2A180JA01#
±0.25pF GRM1882C2A8R7CA01#
22pF
±5%
GRM1882C2A220JA01#
±0.5pF GRM1882C2A8R7DA01#
27pF
±5%
GRM1882C2A270JA01#
±0.05pF GRM1882C2A8R8WA01#
33pF
±5%
GRM1882C2A330JA01#
±0.1pF GRM1882C2A8R8BA01#
39pF
±5%
GRM1882C2A390JA01#
±0.25pF GRM1882C2A8R8CA01#
47pF
±5%
GRM1882C2A470JA01#
±0.5pF GRM1882C2A8R8DA01#
56pF
±5%
GRM1882C2A560JA01#
±0.05pF GRM1882C2A8R9WA01#
68pF
±5%
GRM1882C2A680JA01#
±0.1pF GRM1882C2A8R9BA01#
82pF
±5%
GRM1882C2A820JA01#
±0.25pF GRM1882C2A8R9CA01#
100pF
±5%
GRM1882C2A101JA01#
±0.5pF GRM1882C2A8R9DA01#
120pF
±5%
GRM1882C2A121JA01#
±0.05pF GRM1882C2A9R0WA01#
150pF
±5%
GRM1882C2A151JA01#
±0.1pF GRM1882C2A9R0BA01#
180pF
±5%
GRM1882C2A181JA01#
±0.25pF GRM1882C2A9R0CA01#
220pF
±5%
GRM1882C2A221JA01#
±0.5pF GRM1882C2A9R0DA01#
270pF
±5%
GRM1882C2A271JA01#
±0.05pF GRM1882C2A9R1WA01#
330pF
±5%
GRM1882C2A331JA01#
±0.1pF GRM1882C2A9R1BA01#
390pF
±5%
GRM1882C2A391JA01#
±0.25pF GRM1882C2A9R1CA01#
470pF
±5%
GRM1882C2A471JA01#
±0.5pF GRM1882C2A9R1DA01#
560pF
±5%
GRM1882C2A561JA01#
±0.05pF GRM1882C2A9R2WA01#
680pF
±5%
GRM1882C2A681JA01#
±0.1pF GRM1882C2A9R2BA01#
820pF
±5%
GRM1882C2A821JA01#
±0.25pF GRM1882C2A9R2CA01#
1000pF
±5%
GRM1882C2A102JA01#
±0.5pF GRM1882C2A9R2DA01#
1200pF
±5%
GRM1882C2A122JA01#
Part number # indicates the package specification code.
54
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.6×0.8mm)
±0.1pF GRM1885C1H2R4BA01#
0.5pF
±0.05pF GRM1885C1HR50WA01#
0.6pF
±0.05pF GRM1885C1HR60WA01#
±0.1pF GRM1885C1H2R5BA01#
±0.1pF GRM1885C1HR60BA01#
±0.25pF GRM1885C1H2R5CA01#
±0.25pF GRM1885C1H2R4CA01#
2.6pF
±0.05pF GRM1885C1H2R5WA01#
±0.05pF GRM1885C1H2R6WA01#
±0.1pF GRM1885C1H2R6BA01#
0.8pF
±0.05pF GRM1885C1HR80WA01#
±0.25pF GRM1885C1H2R6CA01#
0.9pF
±0.05pF GRM1885C1HR90WA01#
1.0pF
±0.05pF GRM1885C1H1R0WA01#
2.7pF
±0.25pF GRM1885C1H2R7CA01#
2.8pF
±0.1pF GRM1885C1H1R0BA01#
±0.1pF GRM1885C1H2R8BA01#
±0.25pF GRM1885C1H2R8CA01#
±0.05pF GRM1885C1H1R1WA01#
2.9pF
1.4pF
1.5pF
1.6pF
±0.05pF GRM1885C1H1R2WA01#
±0.25pF GRM1885C1H2R9CA01#
3.0pF
±0.1pF GRM1885C1H1R2BA01#
±0.1pF GRM1885C1H3R0BA01#
±0.25pF GRM1885C1H3R0CA01#
±0.05pF GRM1885C1H1R3WA01#
3.1pF
±0.1pF GRM1885C1H1R3BA01#
±0.1pF GRM1885C1H3R1BA01#
±0.25pF GRM1885C1H3R1CA01#
±0.05pF GRM1885C1H1R4WA01#
3.2pF
±0.1pF GRM1885C1H3R2BA01#
±0.25pF GRM1885C1H1R4CA01#
±0.25pF GRM1885C1H3R2CA01#
±0.05pF GRM1885C1H1R5WA01#
3.3pF
2.1pF
2.2pF
2.3pF
2.4pF
±0.05pF GRM1885C1H3R3WA01#
±0.1pF GRM1885C1H1R5BA01#
±0.1pF GRM1885C1H3R3BA01#
±0.25pF GRM1885C1H1R5CA01#
±0.25pF GRM1885C1H3R3CA01#
±0.05pF GRM1885C1H1R6WA01#
3.4pF
±0.05pF GRM1885C1H1R7WA01#
±0.05pF GRM1885C1H3R4WA01#
±0.1pF GRM1885C1H3R4BA01#
±0.25pF GRM1885C1H3R4CA01#
3.5pF
±0.05pF GRM1885C1H3R5WA01#
±0.1pF GRM1885C1H1R7BA01#
±0.1pF GRM1885C1H3R5BA01#
±0.25pF GRM1885C1H1R7CA01#
±0.25pF GRM1885C1H3R5CA01#
±0.05pF GRM1885C1H1R8WA01#
3.6pF
±0.05pF GRM1885C1H1R9WA01#
±0.05pF GRM1885C1H3R6WA01#
±0.1pF GRM1885C1H3R6BA01#
±0.25pF GRM1885C1H1R8CA01#
2.0pF
±0.05pF GRM1885C1H3R2WA01#
±0.1pF GRM1885C1H1R4BA01#
±0.1pF GRM1885C1H1R8BA01#
1.9pF
±0.05pF GRM1885C1H3R1WA01#
±0.25pF GRM1885C1H1R3CA01#
±0.25pF GRM1885C1H1R6CA01#
1.8pF
±0.05pF GRM1885C1H3R0WA01#
±0.25pF GRM1885C1H1R2CA01#
±0.1pF GRM1885C1H1R6BA01#
1.7pF
±0.05pF GRM1885C1H2R9WA01#
±0.1pF GRM1885C1H2R9BA01#
±0.25pF GRM1885C1H1R1CA01#
1.3pF
±0.05pF GRM1885C1H2R8WA01#
±0.25pF GRM1885C1H1R0CA01#
±0.1pF GRM1885C1H1R1BA01#
1.2pF
±0.05pF GRM1885C1H2R7WA01#
±0.1pF GRM1885C1H2R7BA01#
±0.1pF GRM1885C1HR90BA01#
1.1pF
±0.25pF GRM1885C1H3R6CA01#
3.7pF
±0.05pF GRM1885C1H3R7WA01#
±0.1pF GRM1885C1H1R9BA01#
±0.1pF GRM1885C1H3R7BA01#
±0.25pF GRM1885C1H1R9CA01#
±0.25pF GRM1885C1H3R7CA01#
±0.05pF GRM1885C1H2R0WA01#
3.8pF
±0.05pF GRM1885C1H3R8WA01#
±0.1pF GRM1885C1H2R0BA01#
±0.1pF GRM1885C1H3R8BA01#
±0.25pF GRM1885C1H2R0CA01#
±0.25pF GRM1885C1H3R8CA01#
±0.05pF GRM1885C1H2R1WA01#
3.9pF
±0.05pF GRM1885C1H3R9WA01#
±0.1pF GRM1885C1H2R1BA01#
±0.1pF GRM1885C1H3R9BA01#
±0.25pF GRM1885C1H2R1CA01#
±0.25pF GRM1885C1H3R9CA01#
±0.05pF GRM1885C1H2R2WA01#
4.0pF
±0.05pF GRM1885C1H4R0WA01#
±0.1pF GRM1885C1H2R2BA01#
±0.1pF GRM1885C1H4R0BA01#
±0.25pF GRM1885C1H2R2CA01#
±0.25pF GRM1885C1H4R0CA01#
±0.05pF GRM1885C1H2R3WA01#
4.1pF
±0.05pF GRM1885C1H4R1WA01#
±0.1pF GRM1885C1H2R3BA01#
±0.1pF GRM1885C1H4R1BA01#
±0.25pF GRM1885C1H2R3CA01#
±0.25pF GRM1885C1H4R1CA01#
±0.05pF GRM1885C1H2R4WA01#
Capacitor Array
GNM Series
2.5pF
±0.1pF GRM1885C1HR70BA01#
±0.1pF GRM1885C1HR80BA01#
For General Purpose
GRM Series
2.4pF
Part Number
1500pF
±0.05pF GRM1885C1HR70WA01#
C0G
Tol.
CH
0.7pF
50Vdc
Cap.
C0G
±0.1pF GRM1885C1HR50BA01#
0.9mm
Rated
TC
Voltage Code
Low ESL
LLp Series
GRM1882C2A152JA01#
T
max.
High-Q Type
GJM Series
±5%
Part Number
High Frequency
GQM Series
50Vdc
Tol.
Monolithic Microchip
GMA Series
0.9mm 100Vdc
Cap.
4.2pF
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
±0.05pF GRM1885C1H4R2WA01#
Part number # indicates the package specification code.
55
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.6×0.8mm)
T
max.
For General Purpose
GRM Series
0.9mm
Rated
TC
Voltage Code
50Vdc
C0G
Cap.
4.2pF
4.3pF
Tol.
Part Number
±0.1pF GRM1885C1H4R2BA01#
T
max.
0.9mm
Rated
TC
Voltage Code
50Vdc
C0G
Cap.
5.8pF
±0.1pF GRM1885C1H5R8BA01#
±0.25pF GRM1885C1H5R8CA01#
±0.5pF GRM1885C1H5R8DA01#
5.9pF
±0.1pF GRM1885C1H5R9BA01#
±0.1pF GRM1885C1H4R4BA01#
±0.25pF GRM1885C1H5R9CA01#
Capacitor Array
GNM Series
±0.05pF GRM1885C1H4R5WA01#
±0.25pF GRM1885C1H4R5CA01#
±0.25pF GRM1885C1H6R0CA01#
±0.05pF GRM1885C1H4R6WA01#
±0.5pF GRM1885C1H6R0DA01#
6.1pF
Low ESL
LLp Series
High-Q Type
GJM Series
5.0pF
±0.25pF GRM1885C1H4R6CA01#
±0.1pF GRM1885C1H6R1BA01#
±0.25pF GRM1885C1H6R1CA01#
±0.1pF GRM1885C1H4R7BA01#
±0.5pF GRM1885C1H6R1DA01#
6.2pF
±0.1pF GRM1885C1H6R2BA01#
±0.1pF GRM1885C1H4R8BA01#
±0.25pF GRM1885C1H6R2CA01#
±0.05pF GRM1885C1H4R9WA01#
±0.5pF GRM1885C1H6R2DA01#
6.3pF
±0.1pF GRM1885C1H4R9BA01#
±0.1pF GRM1885C1H6R3BA01#
±0.25pF GRM1885C1H6R3CA01#
±0.05pF GRM1885C1H5R0WA01#
±0.5pF GRM1885C1H6R3DA01#
6.4pF
±0.1pF GRM1885C1H6R4BA01#
±0.05pF GRM1885C1H5R1WA01#
±0.25pF GRM1885C1H6R4CA01#
±0.5pF GRM1885C1H6R4DA01#
High Frequency
GQM Series
6.5pF
±0.5pF GRM1885C1H5R1DA01#
±0.1pF GRM1885C1H6R5BA01#
±0.25pF GRM1885C1H6R5CA01#
±0.1pF GRM1885C1H5R2BA01#
±0.5pF GRM1885C1H6R5DA01#
6.6pF
Monolithic Microchip
GMA Series
±0.5pF GRM1885C1H5R2DA01#
±0.1pF GRM1885C1H6R6BA01#
±0.25pF GRM1885C1H6R6CA01#
±0.1pF GRM1885C1H5R3BA01#
±0.5pF GRM1885C1H6R6DA01#
6.7pF
±0.5pF GRM1885C1H5R3DA01#
±0.1pF GRM1885C1H6R7BA01#
±0.25pF GRM1885C1H6R7CA01#
±0.1pF GRM1885C1H5R4BA01#
±0.5pF GRM1885C1H6R7DA01#
6.8pF
±0.05pF GRM1885C1H6R8WA01#
For Bonding
GMD Series
±0.5pF GRM1885C1H5R4DA01#
±0.1pF GRM1885C1H6R8BA01#
±0.05pF GRM1885C1H5R5WA01#
±0.25pF GRM1885C1H6R8CA01#
±0.1pF GRM1885C1H5R5BA01#
±0.25pF GRM1885C1H5R5CA01#
±0.5pF GRM1885C1H6R8DA01#
6.9pF
±0.05pF GRM1885C1H6R9WA01#
±0.5pF GRM1885C1H5R5DA01#
±0.1pF GRM1885C1H6R9BA01#
±0.05pF GRM1885C1H5R6WA01#
±0.25pF GRM1885C1H6R9CA01#
±0.1pF GRM1885C1H5R6BA01#
Product Information
±0.25pF GRM1885C1H5R6CA01#
5.7pF
±0.05pF GRM1885C1H6R7WA01#
±0.05pF GRM1885C1H5R4WA01#
±0.25pF GRM1885C1H5R4CA01#
5.6pF
±0.05pF GRM1885C1H6R6WA01#
±0.05pF GRM1885C1H5R3WA01#
±0.25pF GRM1885C1H5R3CA01#
5.5pF
±0.05pF GRM1885C1H6R5WA01#
±0.05pF GRM1885C1H5R2WA01#
±0.25pF GRM1885C1H5R2CA01#
5.4pF
±0.05pF GRM1885C1H6R4WA01#
±0.25pF GRM1885C1H5R0CA01#
±0.25pF GRM1885C1H5R1CA01#
5.3pF
±0.05pF GRM1885C1H6R3WA01#
±0.25pF GRM1885C1H4R9CA01#
±0.1pF GRM1885C1H5R1BA01#
5.2pF
±0.05pF GRM1885C1H6R2WA01#
±0.05pF GRM1885C1H4R8WA01#
±0.1pF GRM1885C1H5R0BA01#
5.1pF
±0.05pF GRM1885C1H6R1WA01#
±0.05pF GRM1885C1H4R7WA01#
±0.25pF GRM1885C1H4R8CA01#
4.9pF
±0.05pF GRM1885C1H6R0WA01#
±0.1pF GRM1885C1H6R0BA01#
±0.25pF GRM1885C1H4R7CA01#
4.8pF
±0.5pF GRM1885C1H5R9DA01#
6.0pF
±0.1pF GRM1885C1H4R5BA01#
±0.1pF GRM1885C1H4R6BA01#
4.7pF
±0.05pF GRM1885C1H5R9WA01#
±0.05pF GRM1885C1H4R4WA01#
±0.25pF GRM1885C1H4R4CA01#
4.6pF
±0.05pF GRM1885C1H5R8WA01#
±0.05pF GRM1885C1H4R3WA01#
±0.1pF GRM1885C1H4R3BA01#
4.5pF
Part Number
±0.25pF GRM1885C1H4R2CA01#
±0.25pF GRM1885C1H4R3CA01#
4.4pF
Tol.
±0.5pF GRM1885C1H6R9DA01#
7.0pF
±0.05pF GRM1885C1H7R0WA01#
±0.5pF GRM1885C1H5R6DA01#
±0.1pF GRM1885C1H7R0BA01#
±0.05pF GRM1885C1H5R7WA01#
±0.25pF GRM1885C1H7R0CA01#
±0.5pF GRM1885C1H7R0DA01#
±0.1pF GRM1885C1H5R7BA01#
±0.25pF GRM1885C1H5R7CA01#
±0.5pF GRM1885C1H5R7DA01#
7.1pF
±0.05pF GRM1885C1H7R1WA01#
±0.1pF GRM1885C1H7R1BA01#
Part number # indicates the package specification code.
56
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.6×0.8mm)
C0G
8.5pF
±0.1pF GRM1885C1H8R5BA01#
±0.25pF GRM1885C1H8R5CA01#
±0.5pF GRM1885C1H8R5DA01#
8.6pF
±0.5pF GRM1885C1H7R2DA01#
±0.1pF GRM1885C1H8R6BA01#
±0.25pF GRM1885C1H8R6CA01#
±0.1pF GRM1885C1H7R3BA01#
±0.5pF GRM1885C1H8R6DA01#
8.7pF
±0.1pF GRM1885C1H8R7BA01#
±0.05pF GRM1885C1H7R4WA01#
±0.25pF GRM1885C1H8R7CA01#
±0.25pF GRM1885C1H7R4CA01#
±0.5pF GRM1885C1H8R7DA01#
8.8pF
±0.5pF GRM1885C1H7R4DA01#
±0.1pF GRM1885C1H8R8BA01#
±0.25pF GRM1885C1H8R8CA01#
±0.1pF GRM1885C1H7R5BA01#
±0.5pF GRM1885C1H8R8DA01#
8.9pF
±0.1pF GRM1885C1H8R9BA01#
±0.05pF GRM1885C1H7R6WA01#
±0.25pF GRM1885C1H8R9CA01#
±0.1pF GRM1885C1H7R6BA01#
±0.5pF GRM1885C1H8R9DA01#
9.0pF
±0.5pF GRM1885C1H7R6DA01#
±0.1pF GRM1885C1H9R0BA01#
±0.25pF GRM1885C1H9R0CA01#
±0.1pF GRM1885C1H7R7BA01#
±0.5pF GRM1885C1H9R0DA01#
9.1pF
±0.1pF GRM1885C1H9R1BA01#
±0.05pF GRM1885C1H7R8WA01#
±0.25pF GRM1885C1H9R1CA01#
±0.25pF GRM1885C1H7R8CA01#
±0.5pF GRM1885C1H9R1DA01#
9.2pF
±0.5pF GRM1885C1H7R8DA01#
±0.1pF GRM1885C1H9R2BA01#
±0.25pF GRM1885C1H9R2CA01#
±0.1pF GRM1885C1H7R9BA01#
±0.5pF GRM1885C1H9R2DA01#
9.3pF
±0.5pF GRM1885C1H7R9DA01#
±0.1pF GRM1885C1H9R3BA01#
±0.25pF GRM1885C1H9R3CA01#
±0.1pF GRM1885C1H8R0BA01#
±0.5pF GRM1885C1H9R3DA01#
9.4pF
±0.5pF GRM1885C1H8R0DA01#
±0.1pF GRM1885C1H9R4BA01#
±0.25pF GRM1885C1H9R4CA01#
±0.1pF GRM1885C1H8R1BA01#
±0.5pF GRM1885C1H9R4DA01#
9.5pF
±0.05pF GRM1885C1H9R5WA01#
±0.5pF GRM1885C1H8R1DA01#
±0.1pF GRM1885C1H9R5BA01#
±0.05pF GRM1885C1H8R2WA01#
±0.25pF GRM1885C1H9R5CA01#
±0.1pF GRM1885C1H8R2BA01#
±0.25pF GRM1885C1H8R2CA01#
±0.5pF GRM1885C1H9R5DA01#
9.6pF
±0.05pF GRM1885C1H9R6WA01#
±0.5pF GRM1885C1H8R2DA01#
±0.1pF GRM1885C1H9R6BA01#
±0.05pF GRM1885C1H8R3WA01#
±0.25pF GRM1885C1H9R6CA01#
±0.1pF GRM1885C1H8R3BA01#
±0.25pF GRM1885C1H8R3CA01#
8.4pF
±0.05pF GRM1885C1H9R4WA01#
±0.05pF GRM1885C1H8R1WA01#
±0.25pF GRM1885C1H8R1CA01#
8.3pF
±0.05pF GRM1885C1H9R3WA01#
±0.05pF GRM1885C1H8R0WA01#
±0.25pF GRM1885C1H8R0CA01#
8.2pF
±0.05pF GRM1885C1H9R2WA01#
±0.05pF GRM1885C1H7R9WA01#
±0.25pF GRM1885C1H7R9CA01#
8.1pF
±0.05pF GRM1885C1H9R1WA01#
±0.5pF GRM1885C1H7R7DA01#
±0.1pF GRM1885C1H7R8BA01#
8.0pF
±0.05pF GRM1885C1H9R0WA01#
±0.05pF GRM1885C1H7R7WA01#
±0.25pF GRM1885C1H7R7CA01#
7.9pF
±0.05pF GRM1885C1H8R9WA01#
±0.5pF GRM1885C1H7R5DA01#
±0.25pF GRM1885C1H7R6CA01#
7.8pF
±0.05pF GRM1885C1H8R8WA01#
±0.05pF GRM1885C1H7R5WA01#
±0.25pF GRM1885C1H7R5CA01#
7.7pF
±0.05pF GRM1885C1H8R7WA01#
±0.5pF GRM1885C1H7R3DA01#
±0.1pF GRM1885C1H7R4BA01#
7.6pF
±0.05pF GRM1885C1H8R6WA01#
±0.05pF GRM1885C1H7R3WA01#
±0.25pF GRM1885C1H7R3CA01#
7.5pF
±0.05pF GRM1885C1H8R5WA01#
±0.05pF GRM1885C1H7R2WA01#
±0.1pF GRM1885C1H7R2BA01#
7.4pF
Part Number
±0.5pF GRM1885C1H7R1DA01#
±0.25pF GRM1885C1H7R2CA01#
7.3pF
Tol.
±0.5pF GRM1885C1H9R6DA01#
9.7pF
±0.05pF GRM1885C1H9R7WA01#
±0.5pF GRM1885C1H8R3DA01#
±0.1pF GRM1885C1H9R7BA01#
±0.05pF GRM1885C1H8R4WA01#
±0.25pF GRM1885C1H9R7CA01#
±0.5pF GRM1885C1H9R7DA01#
±0.1pF GRM1885C1H8R4BA01#
±0.25pF GRM1885C1H8R4CA01#
±0.5pF GRM1885C1H8R4DA01#
For General Purpose
GRM Series
50Vdc
Cap.
Capacitor Array
GNM Series
0.9mm
Rated
TC
Voltage Code
Low ESL
LLp Series
7.2pF
±0.25pF GRM1885C1H7R1CA01#
T
max.
High-Q Type
GJM Series
7.1pF
Part Number
High Frequency
GQM Series
C0G
Tol.
Monolithic Microchip
GMA Series
50Vdc
Cap.
For Bonding
GMD Series
0.9mm
Rated
TC
Voltage Code
Product Information
T
max.
9.8pF
±0.05pF GRM1885C1H9R8WA01#
±0.1pF GRM1885C1H9R8BA01#
Part number # indicates the package specification code.
57
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.6×0.8mm)
T
max.
For General Purpose
GRM Series
0.9mm
Rated
TC
Voltage Code
50Vdc
C0G
Cap.
9.8pF
9.9pF
Tol.
Part Number
±0.25pF GRM1885C1H9R8CA01#
T
max.
0.9mm
Rated
TC
Voltage Code
50Vdc
CK
Cap.
1.2pF
Part Number
±0.05pF GRM1884C1H1R2WA01#
±0.5pF GRM1885C1H9R8DA01#
±0.1pF GRM1884C1H1R2BA01#
±0.05pF GRM1885C1H9R9WA01#
±0.25pF GRM1884C1H1R2CA01#
±0.1pF GRM1885C1H9R9BA01#
1.3pF
±0.25pF GRM1885C1H9R9CA01#
±0.05pF GRM1884C1H1R3WA01#
±0.1pF GRM1884C1H1R3BA01#
±0.5pF GRM1885C1H9R9DA01#
±0.25pF GRM1884C1H1R3CA01#
Capacitor Array
GNM Series
Low ESL
LLp Series
High-Q Type
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
10pF
±5%
GRM1885C1H100JA01#
12pF
±5%
GRM1885C1H120JA01#
±0.1pF GRM1884C1H1R4BA01#
15pF
±5%
GRM1885C1H150JA01#
±0.25pF GRM1884C1H1R4CA01#
18pF
±5%
GRM1885C1H180JA01#
22pF
±5%
GRM1885C1H220JA01#
±0.1pF GRM1884C1H1R5BA01#
27pF
±5%
GRM1885C1H270JA01#
±0.25pF GRM1884C1H1R5CA01#
33pF
±5%
GRM1885C1H330JA01#
39pF
±5%
GRM1885C1H390JA01#
±0.1pF GRM1884C1H1R6BA01#
47pF
±5%
GRM1885C1H470JA01#
±0.25pF GRM1884C1H1R6CA01#
56pF
±5%
GRM1885C1H560JA01#
68pF
±5%
GRM1885C1H680JA01#
±0.1pF GRM1884C1H1R7BA01#
82pF
±5%
GRM1885C1H820JA01#
±0.25pF GRM1884C1H1R7CA01#
100pF
±5%
GRM1885C1H101JA01#
120pF
±5%
GRM1885C1H121JA01#
±0.1pF GRM1884C1H1R8BA01#
150pF
±5%
GRM1885C1H151JA01#
±0.25pF GRM1884C1H1R8CA01#
180pF
±5%
GRM1885C1H181JA01#
220pF
±5%
GRM1885C1H221JA01#
±0.1pF GRM1884C1H1R9BA01#
270pF
±5%
GRM1885C1H271JA01#
±0.25pF GRM1884C1H1R9CA01#
330pF
±5%
GRM1885C1H331JA01#
390pF
±5%
GRM1885C1H391JA01#
470pF
±5%
GRM1885C1H471JA01#
560pF
±5%
GRM1885C1H561JA01#
680pF
±5%
GRM1885C1H681JA01#
±0.1pF GRM1883C1H2R1BA01#
820pF
±5%
GRM1885C1H821JA01#
±0.25pF GRM1883C1H2R1CA01#
1000pF
±5%
GRM1885C1H102JA01#
1200pF
±5%
GRM1885C1H122JA01#
±0.1pF GRM1883C1H2R2BA01#
1500pF
±5%
GRM1885C1H152JA01#
±0.25pF GRM1883C1H2R2CA01#
1800pF
±5%
GRM1885C1H182JA01#
2200pF
±5%
GRM1885C1H222JA01#
±0.1pF GRM1883C1H2R3BA01#
2700pF
±5%
GRM1885C1H272JA01#
±0.25pF GRM1883C1H2R3CA01#
3300pF
±5%
GRM1885C1H332JA01#
±5%
GRM1885C1H392JA01#
3900pF
CK
Tol.
1.4pF
1.5pF
1.6pF
1.7pF
1.8pF
1.9pF
2.0pF
±0.05pF GRM1884C1H1R4WA01#
±0.05pF GRM1884C1H1R5WA01#
±0.05pF GRM1884C1H1R6WA01#
±0.05pF GRM1884C1H1R7WA01#
±0.05pF GRM1884C1H1R8WA01#
±0.05pF GRM1884C1H1R9WA01#
±0.05pF GRM1884C1H2R0WA01#
±0.1pF GRM1884C1H2R0BA01#
±0.25pF GRM1884C1H2R0CA01#
CJ
2.1pF
2.2pF
2.3pF
2.4pF
±0.05pF GRM1883C1H2R1WA01#
±0.05pF GRM1883C1H2R2WA01#
±0.05pF GRM1883C1H2R3WA01#
±0.05pF GRM1883C1H2R4WA01#
±0.1pF GRM1883C1H2R4BA01#
0.5pF
±0.05pF GRM1884C1HR50WA01#
0.6pF
±0.05pF GRM1884C1HR60WA01#
±0.1pF GRM1883C1H2R5BA01#
±0.1pF GRM1884C1HR60BA01#
±0.25pF GRM1883C1H2R5CA01#
±0.1pF GRM1884C1HR50BA01#
For Bonding
GMD Series
0.7pF
±0.05pF GRM1884C1HR70WA01#
±0.25pF GRM1883C1H2R4CA01#
2.5pF
2.6pF
±0.05pF GRM1883C1H2R5WA01#
±0.05pF GRM1883C1H2R6WA01#
±0.1pF GRM1884C1HR70BA01#
±0.1pF GRM1883C1H2R6BA01#
0.8pF
±0.05pF GRM1884C1HR80WA01#
±0.25pF GRM1883C1H2R6CA01#
0.9pF
±0.05pF GRM1884C1HR90WA01#
1.0pF
±0.05pF GRM1884C1H1R0WA01#
±0.1pF GRM1884C1HR80BA01#
2.7pF
±0.1pF GRM1883C1H2R7BA01#
±0.1pF GRM1884C1HR90BA01#
Product Information
1.1pF
±0.05pF GRM1883C1H2R7WA01#
±0.25pF GRM1883C1H2R7CA01#
2.8pF
±0.05pF GRM1883C1H2R8WA01#
±0.1pF GRM1884C1H1R0BA01#
±0.1pF GRM1883C1H2R8BA01#
±0.25pF GRM1884C1H1R0CA01#
±0.25pF GRM1883C1H2R8CA01#
±0.05pF GRM1884C1H1R1WA01#
±0.1pF GRM1884C1H1R1BA01#
±0.25pF GRM1884C1H1R1CA01#
2.9pF
±0.05pF GRM1883C1H2R9WA01#
±0.1pF GRM1883C1H2R9BA01#
±0.25pF GRM1883C1H2R9CA01#
Part number # indicates the package specification code.
58
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.6×0.8mm)
CH
4.8pF
3.4pF
±0.1pF GRM1882C1H4R8BA01#
±0.25pF GRM1882C1H4R8CA01#
±0.05pF GRM1883C1H3R1WA01#
±0.05pF GRM1883C1H3R2WA01#
4.9pF
±0.1pF GRM1882C1H4R9BA01#
±0.25pF GRM1882C1H4R9CA01#
5.0pF
±0.1pF GRM1882C1H5R0BA01#
±0.25pF GRM1882C1H5R0CA01#
±0.05pF GRM1883C1H3R3WA01#
5.1pF
3.8pF
±0.1pF GRM1883C1H3R3BA01#
±0.1pF GRM1882C1H5R1BA01#
±0.25pF GRM1882C1H5R1CA01#
±0.05pF GRM1883C1H3R4WA01#
±0.5pF GRM1882C1H5R1DA01#
5.2pF
±0.1pF GRM1882C1H5R2BA01#
±0.05pF GRM1883C1H3R5WA01#
±0.25pF GRM1882C1H5R2CA01#
±0.5pF GRM1882C1H5R2DA01#
5.3pF
±0.1pF GRM1882C1H5R3BA01#
±0.1pF GRM1883C1H3R6BA01#
±0.25pF GRM1882C1H5R3CA01#
±0.25pF GRM1883C1H3R6CA01#
±0.5pF GRM1882C1H5R3DA01#
±0.05pF GRM1883C1H3R7WA01#
5.4pF
±0.1pF GRM1882C1H5R4BA01#
±0.25pF GRM1883C1H3R7CA01#
±0.25pF GRM1882C1H5R4CA01#
±0.05pF GRM1883C1H3R8WA01#
±0.5pF GRM1882C1H5R4DA01#
5.5pF
4.2pF
±0.25pF GRM1883C1H3R8CA01#
±0.1pF GRM1882C1H5R5BA01#
±0.25pF GRM1882C1H5R5CA01#
±0.5pF GRM1882C1H5R5DA01#
5.6pF
±0.1pF GRM1882C1H5R6BA01#
±0.1pF GRM1882C1H4R0BA01#
±0.25pF GRM1882C1H5R6CA01#
±0.05pF GRM1882C1H4R1WA01#
±0.5pF GRM1882C1H5R6DA01#
5.7pF
±0.1pF GRM1882C1H4R1BA01#
±0.1pF GRM1882C1H5R7BA01#
±0.25pF GRM1882C1H5R7CA01#
±0.05pF GRM1882C1H4R2WA01#
±0.5pF GRM1882C1H5R7DA01#
5.8pF
±0.1pF GRM1882C1H5R8BA01#
±0.05pF GRM1882C1H4R3WA01#
±0.25pF GRM1882C1H5R8CA01#
±0.5pF GRM1882C1H5R8DA01#
5.9pF
±0.1pF GRM1882C1H5R9BA01#
±0.1pF GRM1882C1H4R4BA01#
±0.25pF GRM1882C1H5R9CA01#
±0.05pF GRM1882C1H4R5WA01#
±0.5pF GRM1882C1H5R9DA01#
6.0pF
±0.05pF GRM1882C1H6R0WA01#
±0.1pF GRM1882C1H4R5BA01#
±0.1pF GRM1882C1H6R0BA01#
±0.25pF GRM1882C1H4R5CA01#
±0.25pF GRM1882C1H6R0CA01#
±0.05pF GRM1882C1H4R6WA01#
±0.1pF GRM1882C1H4R6BA01#
4.7pF
±0.05pF GRM1882C1H5R9WA01#
±0.05pF GRM1882C1H4R4WA01#
±0.25pF GRM1882C1H4R4CA01#
4.6pF
±0.05pF GRM1882C1H5R8WA01#
±0.25pF GRM1882C1H4R2CA01#
±0.1pF GRM1882C1H4R3BA01#
4.5pF
±0.05pF GRM1882C1H5R7WA01#
±0.25pF GRM1882C1H4R1CA01#
±0.25pF GRM1882C1H4R3CA01#
4.4pF
±0.05pF GRM1882C1H5R6WA01#
±0.05pF GRM1882C1H4R0WA01#
±0.1pF GRM1882C1H4R2BA01#
4.3pF
±0.05pF GRM1882C1H5R5WA01#
±0.05pF GRM1883C1H3R9WA01#
±0.25pF GRM1882C1H4R0CA01#
4.1pF
±0.05pF GRM1882C1H5R4WA01#
±0.1pF GRM1883C1H3R7BA01#
±0.1pF GRM1883C1H3R9BA01#
4.0pF
±0.05pF GRM1882C1H5R3WA01#
±0.05pF GRM1883C1H3R6WA01#
±0.25pF GRM1883C1H3R9CA01#
CH
±0.05pF GRM1882C1H5R2WA01#
±0.25pF GRM1883C1H3R4CA01#
±0.1pF GRM1883C1H3R8BA01#
3.9pF
±0.05pF GRM1882C1H5R1WA01#
±0.25pF GRM1883C1H3R3CA01#
±0.1pF GRM1883C1H3R5BA01#
3.7pF
±0.05pF GRM1882C1H5R0WA01#
±0.1pF GRM1883C1H3R2BA01#
±0.25pF GRM1883C1H3R5CA01#
3.6pF
±0.05pF GRM1882C1H4R9WA01#
±0.25pF GRM1883C1H3R2CA01#
±0.1pF GRM1883C1H3R4BA01#
3.5pF
±0.05pF GRM1882C1H4R8WA01#
±0.25pF GRM1883C1H3R0CA01#
±0.25pF GRM1883C1H3R1CA01#
3.3pF
Part Number
±0.1pF GRM1883C1H3R0BA01#
±0.1pF GRM1883C1H3R1BA01#
3.2pF
Tol.
±0.5pF GRM1882C1H6R0DA01#
6.1pF
±0.05pF GRM1882C1H6R1WA01#
±0.25pF GRM1882C1H4R6CA01#
±0.1pF GRM1882C1H6R1BA01#
±0.05pF GRM1882C1H4R7WA01#
±0.25pF GRM1882C1H6R1CA01#
±0.1pF GRM1882C1H4R7BA01#
±0.5pF GRM1882C1H6R1DA01#
±0.25pF GRM1882C1H4R7CA01#
For General Purpose
GRM Series
50Vdc
Cap.
Capacitor Array
GNM Series
0.9mm
Rated
TC
Voltage Code
Low ESL
LLp Series
3.1pF
±0.05pF GRM1883C1H3R0WA01#
T
max.
High-Q Type
GJM Series
3.0pF
Part Number
High Frequency
GQM Series
CJ
Tol.
Monolithic Microchip
GMA Series
50Vdc
Cap.
For Bonding
GMD Series
0.9mm
Rated
TC
Voltage Code
Product Information
T
max.
6.2pF
±0.05pF GRM1882C1H6R2WA01#
Part number # indicates the package specification code.
59
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.6×0.8mm)
T
max.
For General Purpose
GRM Series
0.9mm
Rated
TC
Voltage Code
50Vdc
CH
Cap.
6.2pF
Tol.
Part Number
±0.1pF GRM1882C1H6R2BA01#
±0.25pF GRM1882C1H6R2CA01#
6.3pF
0.9mm
Rated
TC
Voltage Code
50Vdc
CH
Cap.
7.5pF
±0.5pF GRM1882C1H7R5DA01#
7.6pF
±0.05pF GRM1882C1H7R6WA01#
±0.1pF GRM1882C1H7R6BA01#
±0.25pF GRM1882C1H7R6CA01#
±0.1pF GRM1882C1H6R3BA01#
±0.5pF GRM1882C1H7R6DA01#
7.7pF
±0.1pF GRM1882C1H7R7BA01#
±0.05pF GRM1882C1H6R4WA01#
±0.25pF GRM1882C1H7R7CA01#
Capacitor Array
GNM Series
±0.5pF GRM1882C1H7R7DA01#
7.8pF
±0.5pF GRM1882C1H6R4DA01#
±0.1pF GRM1882C1H7R8BA01#
±0.25pF GRM1882C1H7R8CA01#
±0.1pF GRM1882C1H6R5BA01#
±0.5pF GRM1882C1H7R8DA01#
7.9pF
Low ESL
LLp Series
±0.1pF GRM1882C1H7R9BA01#
±0.05pF GRM1882C1H6R6WA01#
±0.25pF GRM1882C1H7R9CA01#
±0.1pF GRM1882C1H6R6BA01#
±0.5pF GRM1882C1H7R9DA01#
8.0pF
±0.5pF GRM1882C1H6R6DA01#
±0.1pF GRM1882C1H8R0BA01#
±0.25pF GRM1882C1H8R0CA01#
±0.1pF GRM1882C1H6R7BA01#
±0.5pF GRM1882C1H8R0DA01#
8.1pF
High-Q Type
GJM Series
±0.1pF GRM1882C1H8R1BA01#
±0.05pF GRM1882C1H6R8WA01#
±0.25pF GRM1882C1H8R1CA01#
±0.1pF GRM1882C1H6R8BA01#
±0.5pF GRM1882C1H8R1DA01#
8.2pF
±0.5pF GRM1882C1H6R8DA01#
±0.1pF GRM1882C1H8R2BA01#
±0.25pF GRM1882C1H8R2CA01#
High Frequency
GQM Series
±0.1pF GRM1882C1H6R9BA01#
±0.5pF GRM1882C1H8R2DA01#
8.3pF
±0.1pF GRM1882C1H8R3BA01#
±0.05pF GRM1882C1H7R0WA01#
±0.25pF GRM1882C1H8R3CA01#
±0.25pF GRM1882C1H7R0CA01#
±0.5pF GRM1882C1H8R3DA01#
8.4pF
Monolithic Microchip
GMA Series
±0.5pF GRM1882C1H7R0DA01#
±0.1pF GRM1882C1H8R4BA01#
±0.25pF GRM1882C1H8R4CA01#
±0.1pF GRM1882C1H7R1BA01#
±0.5pF GRM1882C1H8R4DA01#
8.5pF
±0.1pF GRM1882C1H8R5BA01#
±0.05pF GRM1882C1H7R2WA01#
±0.25pF GRM1882C1H8R5CA01#
±0.1pF GRM1882C1H7R2BA01#
±0.5pF GRM1882C1H8R5DA01#
8.6pF
±0.05pF GRM1882C1H8R6WA01#
For Bonding
GMD Series
±0.5pF GRM1882C1H7R2DA01#
±0.1pF GRM1882C1H8R6BA01#
±0.05pF GRM1882C1H7R3WA01#
±0.25pF GRM1882C1H8R6CA01#
±0.1pF GRM1882C1H7R3BA01#
±0.25pF GRM1882C1H7R3CA01#
±0.5pF GRM1882C1H8R6DA01#
8.7pF
±0.05pF GRM1882C1H8R7WA01#
±0.5pF GRM1882C1H7R3DA01#
±0.1pF GRM1882C1H8R7BA01#
±0.05pF GRM1882C1H7R4WA01#
±0.25pF GRM1882C1H8R7CA01#
Product Information
±0.1pF GRM1882C1H7R4BA01#
±0.25pF GRM1882C1H7R4CA01#
7.5pF
±0.05pF GRM1882C1H8R5WA01#
±0.5pF GRM1882C1H7R1DA01#
±0.25pF GRM1882C1H7R2CA01#
7.4pF
±0.05pF GRM1882C1H8R4WA01#
±0.05pF GRM1882C1H7R1WA01#
±0.25pF GRM1882C1H7R1CA01#
7.3pF
±0.05pF GRM1882C1H8R3WA01#
±0.5pF GRM1882C1H6R9DA01#
±0.1pF GRM1882C1H7R0BA01#
7.2pF
±0.05pF GRM1882C1H8R2WA01#
±0.05pF GRM1882C1H6R9WA01#
±0.25pF GRM1882C1H6R9CA01#
7.1pF
±0.05pF GRM1882C1H8R1WA01#
±0.5pF GRM1882C1H6R7DA01#
±0.25pF GRM1882C1H6R8CA01#
7.0pF
±0.05pF GRM1882C1H8R0WA01#
±0.05pF GRM1882C1H6R7WA01#
±0.25pF GRM1882C1H6R7CA01#
6.9pF
±0.05pF GRM1882C1H7R9WA01#
±0.5pF GRM1882C1H6R5DA01#
±0.25pF GRM1882C1H6R6CA01#
6.8pF
±0.05pF GRM1882C1H7R8WA01#
±0.05pF GRM1882C1H6R5WA01#
±0.25pF GRM1882C1H6R5CA01#
6.7pF
±0.05pF GRM1882C1H7R7WA01#
±0.5pF GRM1882C1H6R3DA01#
±0.1pF GRM1882C1H6R4BA01#
6.6pF
Part Number
±0.5pF GRM1882C1H6R2DA01#
±0.25pF GRM1882C1H6R4CA01#
6.5pF
Tol.
±0.05pF GRM1882C1H6R3WA01#
±0.25pF GRM1882C1H6R3CA01#
6.4pF
T
max.
±0.5pF GRM1882C1H8R7DA01#
8.8pF
±0.05pF GRM1882C1H8R8WA01#
±0.5pF GRM1882C1H7R4DA01#
±0.1pF GRM1882C1H8R8BA01#
±0.05pF GRM1882C1H7R5WA01#
±0.25pF GRM1882C1H8R8CA01#
±0.1pF GRM1882C1H7R5BA01#
±0.5pF GRM1882C1H8R8DA01#
±0.25pF GRM1882C1H7R5CA01#
8.9pF
±0.05pF GRM1882C1H8R9WA01#
Part number # indicates the package specification code.
60
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.6×0.8mm)
9.2pF
9.3pF
9.4pF
9.6pF
9.7pF
9.9pF
82pF
±5%
GRM1882C1H820JA01#
±5%
GRM1882C1H101JA01#
±0.5pF GRM1882C1H8R9DA01#
120pF
±5%
GRM1882C1H121JA01#
±0.05pF GRM1882C1H9R0WA01#
150pF
±5%
GRM1882C1H151JA01#
±0.1pF GRM1882C1H9R0BA01#
180pF
±5%
GRM1882C1H181JA01#
±0.25pF GRM1882C1H9R0CA01#
220pF
±5%
GRM1882C1H221JA01#
±0.5pF GRM1882C1H9R0DA01#
270pF
±5%
GRM1882C1H271JA01#
±0.05pF GRM1882C1H9R1WA01#
330pF
±5%
GRM1882C1H331JA01#
±0.1pF GRM1882C1H9R1BA01#
390pF
±5%
GRM1882C1H391JA01#
±0.25pF GRM1882C1H9R1CA01#
470pF
±5%
GRM1882C1H471JA01#
0.9mm
50Vdc
CH
±0.5pF GRM1882C1H9R1DA01#
560pF
±5%
GRM1882C1H561JA01#
±0.05pF GRM1882C1H9R2WA01#
680pF
±5%
GRM1882C1H681JA01#
±0.1pF GRM1882C1H9R2BA01#
820pF
±5%
GRM1882C1H821JA01#
±0.25pF GRM1882C1H9R2CA01#
1000pF
±5%
GRM1882C1H102JA01#
±0.5pF GRM1882C1H9R2DA01#
1200pF
±5%
GRM1882C1H122JA01#
±0.05pF GRM1882C1H9R3WA01#
1500pF
±5%
GRM1882C1H152JA01#
±0.1pF GRM1882C1H9R3BA01#
1800pF
±5%
GRM1882C1H182JA01#
±0.25pF GRM1882C1H9R3CA01#
2200pF
±5%
GRM1882C1H222JA01#
±0.5pF GRM1882C1H9R3DA01#
2700pF
±5%
GRM1882C1H272JA01#
±0.05pF GRM1882C1H9R4WA01#
3300pF
±5%
GRM1882C1H332JA01#
±0.1pF GRM1882C1H9R4BA01#
3900pF
±5%
GRM1882C1H392JA01#
1200pF
±5%
GRM1881X1H122JA01#
±0.5pF GRM1882C1H9R4DA01#
1500pF
±5%
GRM1881X1H152JA01#
±0.05pF GRM1882C1H9R5WA01#
1800pF
±5%
GRM1881X1H182JA01#
±0.1pF GRM1882C1H9R5BA01#
2200pF
±5%
GRM1881X1H222JA01#
±0.25pF GRM1882C1H9R5CA01#
2700pF
±5%
GRM1881X1H272JA01#
SL
±0.5pF GRM1882C1H9R5DA01#
3300pF
±5%
GRM1881X1H332JA01#
±0.05pF GRM1882C1H9R6WA01#
3900pF
±5%
GRM1881X1H392JA01#
±0.1pF GRM1882C1H9R6BA01#
4700pF
±5%
GRM1881X1H472JA01#
±0.25pF GRM1882C1H9R6CA01#
5600pF
±5%
GRM1881X1H562JA01#
±0.5pF GRM1882C1H9R6DA01#
6800pF
±5%
GRM1881X1H682JA01#
±0.05pF GRM1882C1H9R7WA01#
8200pF
±5%
GRM1881X1H822JA01#
±0.1pF GRM1882C1H9R7BA01#
10000pF
±5%
GRM1881X1H103JA01#
1200pF
±5%
GRM1887U1H122JA01#
±0.5pF GRM1882C1H9R7DA01#
1500pF
±5%
GRM1887U1H152JA01#
±0.05pF GRM1882C1H9R8WA01#
1800pF
±5%
GRM1887U1H182JA01#
±0.1pF GRM1882C1H9R8BA01#
2200pF
±5%
GRM1887U1H222JA01#
±0.25pF GRM1882C1H9R8CA01#
2700pF
±5%
GRM1887U1H272JA01#
±0.5pF GRM1882C1H9R8DA01#
3300pF
±5%
GRM1887U1H332JA01#
±0.05pF GRM1882C1H9R9WA01#
3900pF
±5%
GRM1887U1H392JA01#
±0.1pF GRM1882C1H9R9BA01#
4700pF
±5%
GRM1887U1H472JA01#
±0.25pF GRM1882C1H9R9CA01#
5600pF
±5%
GRM1887U1H562JA01#
±0.5pF GRM1882C1H9R9DA01#
U2J
6800pF
±5%
GRM1887U1H682JA01#
10pF
±5%
GRM1882C1H100JA01#
8200pF
±5%
GRM1887U1H822JA01#
12pF
±5%
GRM1882C1H120JA01#
10000pF
±5%
GRM1887U1H103JA01#
15pF
±5%
GRM1882C1H150JA01#
1000pF
±5%
GRM1883U1H102JA01#
18pF
±5%
GRM1882C1H180JA01#
1200pF
±5%
GRM1883U1H122JA01#
22pF
±5%
GRM1882C1H220JA01#
1500pF
±5%
GRM1883U1H152JA01#
27pF
±5%
GRM1882C1H270JA01#
1800pF
±5%
GRM1883U1H182JA01#
33pF
±5%
GRM1882C1H330JA01#
2200pF
±5%
GRM1883U1H222JA01#
39pF
±5%
GRM1882C1H390JA01#
2700pF
±5%
GRM1883U1H272JA01#
47pF
±5%
GRM1882C1H470JA01#
3300pF
±5%
GRM1883U1H332JA01#
56pF
±5%
GRM1882C1H560JA01#
3900pF
±5%
GRM1883U1H392JA01#
68pF
±5%
GRM1882C1H680JA01#
4700pF
±5%
GRM1883U1H472JA01#
UJ
For General Purpose
GRM Series
Part Number
100pF
±0.25pF GRM1882C1H9R7CA01#
9.8pF
Tol.
±0.25pF GRM1882C1H8R9CA01#
±0.25pF GRM1882C1H9R4CA01#
9.5pF
Cap.
Capacitor Array
GNM Series
9.1pF
Rated
TC
Voltage Code
Low ESL
LLp Series
9.0pF
±0.1pF GRM1882C1H8R9BA01#
T
max.
High-Q Type
GJM Series
8.9pF
Part Number
High Frequency
GQM Series
CH
Tol.
Monolithic Microchip
GMA Series
50Vdc
Cap.
For Bonding
GMD Series
0.9mm
Rated
TC
Voltage Code
Product Information
T
max.
Part number # indicates the package specification code.
61
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 1.6×0.8mm)
T
max.
For General Purpose
GRM Series
0.9mm
Rated
TC
Voltage Code
50Vdc
10Vdc
Capacitor Array
GNM Series
1500pF
±5%
GRM2162C2A152JA01#
1800pF
±5%
GRM2162C2A182JA01#
GRM1883U1H822JA01#
2200pF
±5%
GRM2162C2A222JA01#
±5%
GRM1883U1H103JA01#
2700pF
±5%
GRM2162C2A272JA01#
12000pF
±5%
GRM1881X1A123JA01#
3300pF
±5%
GRM2162C2A332JA01#
15000pF
±5%
GRM1881X1A153JA01#
1200pF
±5%
GRM2165C1H122JA01#
18000pF
±5%
GRM1881X1A183JA01#
1500pF
±5%
GRM2165C1H152JA01#
22000pF
±5%
GRM1881X1A223JA01#
1800pF
±5%
GRM2165C1H182JA01#
U2J 12000pF
±5%
GRM1887U1A123JA01#
2200pF
±5%
GRM2165C1H222JA01#
15000pF
±5%
GRM1887U1A153JA01#
2700pF
±5%
GRM2165C1H272JA01#
18000pF
±5%
GRM1887U1A183JA01#
3300pF
±5%
GRM2165C1H332JA01#
22000pF
±5%
GRM1887U1A223JA01#
3900pF
±5%
GRM2165C1H392JA01#
12000pF
±5%
GRM1883U1A123JA01#
4700pF
±5%
GRM2165C1H472JA01#
15000pF
±5%
GRM1883U1A153JA01#
1200pF
±5%
GRM2162C1H122JA01#
18000pF
±5%
GRM1883U1A183JA01#
1500pF
±5%
GRM2162C1H152JA01#
±5%
GRM1883U1A223JA01#
1800pF
±5%
GRM2162C1H182JA01#
2200pF
±5%
GRM2162C1H222JA01#
2700pF
±5%
GRM2162C1H272JA01#
3300pF
±5%
GRM2162C1H332JA01#
3900pF
±5%
GRM2162C1H392JA01#
4700pF
±5%
GRM2162C1H472JA01#
UJ
5600pF
±5%
GRM1883U1H562JA01#
6800pF
±5%
GRM1883U1H682JA01#
8200pF
±5%
10000pF
Low ESL
LLp Series
22000pF
Part Number
Rated
TC
Voltage Code
Tol.
SL
Tol.
T
max.
Cap.
UJ
Cap.
0.7mm 100Vdc
50Vdc
CH
C0G
CH
c 2.0×1.25mm
T
max.
Rated
TC
Voltage Code
0.7mm 100Vdc C0G
High-Q Type
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
CH
Cap.
Tol.
Part Number
Part Number
For Bonding
GMD Series
Product Information
100pF
±5%
GRM2165C2A101JA01#
12000pF
±5%
GRM2161X1H123JA01#
120pF
±5%
GRM2165C2A121JA01#
15000pF
±5%
GRM2161X1H153JA01#
150pF
±5%
GRM2165C2A151JA01#
18000pF
±5%
GRM2161X1H183JA01#
180pF
±5%
GRM2165C2A181JA01#
U2J 12000pF
±5%
GRM2167U1H123JA01#
220pF
±5%
GRM2165C2A221JA01#
15000pF
±5%
GRM2167U1H153JA01#
270pF
±5%
GRM2165C2A271JA01#
18000pF
±5%
GRM2167U1H183JA01#
330pF
±5%
GRM2165C2A331JA01#
10000pF
±5%
GRM2163U1H103JA01#
390pF
±5%
GRM2165C2A391JA01#
12000pF
±5%
GRM2163U1H123JA01#
470pF
±5%
GRM2165C2A471JA01#
15000pF
±5%
GRM2163U1H153JA01#
560pF
±5%
GRM2165C2A561JA01#
18000pF
±5%
GRM2163U1H183JA01#
680pF
±5%
GRM2165C2A681JA01#
5600pF
±5%
GRM2195C1H562JA01#
820pF
±5%
GRM2165C2A821JA01#
6800pF
±5%
GRM2195C1H682JA01#
1000pF
±5%
GRM2165C2A102JA01#
8200pF
±5%
GRM2195C1H822JA01#
1200pF
±5%
GRM2165C2A122JA01#
10000pF
±5%
GRM2195C1H103JA01#
1500pF
±5%
GRM2165C2A152JA01#
12000pF
±5%
GRM2195C1H123JA01#
1800pF
±5%
GRM2165C2A182JA01#
15000pF
±5%
GRM2195C1H153JA01#
2200pF
±5%
GRM2165C2A222JA01#
5600pF
±5%
GRM2192C1H562JA01#
2700pF
±5%
GRM2165C2A272JA01#
6800pF
±5%
GRM2192C1H682JA01#
3300pF
±5%
GRM2165C2A332JA01#
8200pF
±5%
GRM2192C1H822JA01#
100pF
±5%
GRM2162C2A101JA01#
10000pF
±5%
GRM2192C1H103JA01#
120pF
±5%
GRM2162C2A121JA01#
12000pF
±5%
GRM2192C1H123JA01#
150pF
±5%
GRM2162C2A151JA01#
15000pF
±5%
GRM2192C1H153JA01#
180pF
±5%
GRM2162C2A181JA01#
22000pF
±5%
GRM2191X1H223JA01#
220pF
±5%
GRM2162C2A221JA01#
27000pF
±5%
GRM2191X1H273JA01#
270pF
±5%
GRM2162C2A271JA01#
U2J 22000pF
±5%
GRM2197U1H223JA01#
330pF
±5%
GRM2162C2A331JA01#
27000pF
±5%
GRM2197U1H273JA01#
390pF
±5%
GRM2162C2A391JA01#
22000pF
±5%
GRM2193U1H223JA01#
470pF
±5%
GRM2162C2A471JA01#
27000pF
±5%
GRM2193U1H273JA01#
560pF
±5%
GRM2162C2A561JA01#
56000pF
±5%
GRM2191X1A563JA01#
680pF
±5%
GRM2162C2A681JA01#
U2J 56000pF
±5%
GRM2197U1A563JA01#
820pF
±5%
GRM2162C2A821JA01#
UJ
56000pF
±5%
GRM2193U1A563JA01#
1000pF
±5%
GRM2162C2A102JA01#
SL
33000pF
±5%
GRM21A1X1H333JA39#
1200pF
±5%
GRM2162C2A122JA01#
U2J 33000pF
±5%
GRM21A7U1H333JA39#
SL
UJ
0.95mm 50Vdc
C0G
CH
SL
UJ
10Vdc
1mm
50Vdc
SL
Part number # indicates the package specification code.
62
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Temperature Compensating Type Part Number List
(→ c 2.0×1.25mm)
GRM21A3U1H333JA39#
C0G 15000pF
±5%
GRM3195C1H153JA01#
GRM21B5C1H183JA01#
18000pF
±5%
GRM3195C1H183JA01#
22000pF
±5%
GRM21B5C1H223JA01#
22000pF
±5%
GRM3195C1H223JA01#
18000pF
±5%
GRM21B2C1H183JA01#
27000pF
±5%
GRM3195C1H273JA01#
22000pF
±5%
GRM21B2C1H223JA01#
33000pF
±5%
GRM3195C1H333JA01#
39000pF
±5%
GRM21B1X1H393JA01#
47000pF
±5%
GRM21B1X1H473JA01#
U2J 39000pF
±5%
47000pF
UJ
10Vdc
SL
39000pF
±5%
GRM3195C1H393JA01#
12000pF
±5%
GRM3192C1H123JA01#
GRM21B7U1H393JA01#
15000pF
±5%
GRM3192C1H153JA01#
±5%
GRM21B7U1H473JA01#
18000pF
±5%
GRM3192C1H183JA01#
39000pF
±5%
GRM21B3U1H393JA01#
22000pF
±5%
GRM3192C1H223JA01#
47000pF
±5%
GRM21B3U1H473JA01#
27000pF
±5%
GRM3192C1H273JA01#
68000pF
±5%
GRM21B1X1A683JA01#
33000pF
±5%
GRM3192C1H333JA01#
82000pF
±5%
GRM21B1X1A823JA01#
39000pF
±5%
GRM3192C1H393JA01#
0.1µF
±5%
GRM21B1X1A104JA01#
SL
56000pF
±5%
GRM3191X1H563JA01#
±5%
GRM21B7U1A683JA01#
U2J 56000pF
±5%
GRM3197U1H563JA01#
82000pF
±5%
GRM21B7U1A823JA01#
UJ
56000pF
±5%
GRM3193U1H563JA01#
C0G 47000pF
±5%
GRM31M5C1H473JA01#
56000pF
±5%
GRM31M5C1H563JA01#
47000pF
±5%
GRM31M2C1H473JA01#
56000pF
±5%
GRM31M2C1H563JA01#
68000pF
±5%
GRM31M1X1H683JA01#
82000pF
±5%
GRM31M1X1H823JA01#
0.1µF
±5%
GRM31M1X1H104JA01#
U2J 68000pF
±5%
GRM31M7U1H683JA01#
82000pF
±5%
GRM31M7U1H823JA01#
0.1µF
±5%
GRM31M7U1H104JA01#
U2J 68000pF
UJ
0.95mm 50Vdc
0.1µF
±5%
GRM21B7U1A104JA01#
68000pF
±5%
GRM21B3U1A683JA01#
82000pF
±5%
GRM21B3U1A823JA01#
0.1µF
±5%
GRM21B3U1A104JA01#
CH
1.25mm 50Vdc
CH
SL
c 3.2×1.6mm
Rated
TC
Voltage Code
0.95mm 100Vdc C0G
CH
Cap.
Tol.
Part Number
1800pF
±5%
GRM3195C2A182JA01#
2200pF
±5%
GRM3195C2A222JA01#
68000pF
±5%
GRM31M3U1H683JA01#
2700pF
±5%
GRM3195C2A272JA01#
82000pF
±5%
GRM31M3U1H823JA01#
3300pF
±5%
GRM3195C2A332JA01#
0.1µF
±5%
GRM31M3U1H104JA01#
3900pF
±5%
GRM3195C2A392JA01#
C0G 68000pF
±5%
GRM31C5C1H683JA01#
4700pF
±5%
GRM3195C2A472JA01#
82000pF
±5%
GRM31C5C1H823JA01#
5600pF
±5%
GRM3195C2A562JA01#
6800pF
±5%
GRM3195C2A682JA01#
8200pF
±5%
10000pF
UJ
1.8mm
50Vdc
0.1µF
±5%
GRM31C5C1H104JA01#
68000pF
±5%
GRM31C2C1H683JA01#
GRM3195C2A822JA01#
82000pF
±5%
GRM31C2C1H823JA01#
±5%
GRM3195C2A103JA01#
0.1µF
±5%
GRM31C2C1H104JA01#
12000pF
±5%
GRM3195C2A123JA01#
15000pF
±5%
GRM3195C2A153JA01#
18000pF
±5%
GRM3195C2A183JA01#
22000pF
±5%
GRM3195C2A223JA01#
1800pF
±5%
GRM3192C2A182JA01#
2200pF
±5%
GRM3192C2A222JA01#
2700pF
±5%
GRM3192C2A272JA01#
3300pF
±5%
GRM3192C2A332JA01#
3900pF
±5%
GRM3192C2A392JA01#
4700pF
±5%
GRM3192C2A472JA01#
5600pF
±5%
GRM3192C2A562JA01#
6800pF
±5%
GRM3192C2A682JA01#
8200pF
±5%
GRM3192C2A822JA01#
10000pF
±5%
GRM3192C2A103JA01#
12000pF
±5%
GRM3192C2A123JA01#
15000pF
±5%
GRM3192C2A153JA01#
18000pF
±5%
GRM3192C2A183JA01#
22000pF
±5%
GRM3192C2A223JA01#
C0G 12000pF
±5%
GRM3195C1H123JA01#
CH
Capacitor Array
GNM Series
±5%
For General Purpose
GRM Series
Part Number
±5%
SL
50Vdc
Tol.
33000pF
UJ
CH
T
max.
Cap.
Low ESL
LLp Series
Rated
TC
Voltage Code
High-Q Type
GJM Series
T
max.
High Frequency
GQM Series
Part Number
Monolithic Microchip
GMA Series
Tol.
C0G 18000pF
50Vdc
1.35mm 50Vdc
Cap.
For Bonding
GMD Series
1mm
Rated
TC
Voltage Code
Product Information
T
max.
Part number # indicates the package specification code.
63
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series High Dielectric Constant Type Part Number List
c 0.4×0.2mm
For General Purpose
GRM Series
T
max.
Rated
TC
Voltage Code
0.22mm 10Vdc
T
max.
Ultracompact
X7R
Cap.
0.22mm 10Vdc
B
Capacitor Array
GNM Series
Part Number
680pF
±10%
GRM022B31A681KE19#
±20%
GRM022B31A681ME19#
±10%
GRM022B31A102KE19#
±20%
GRM022B31A102ME19#
1500pF
±10%
GRM022B31A152KE19#
±20%
GRM022B31A152ME19#
2200pF
±10%
GRM022B31A222KE19#
±20%
GRM022B31A222ME19#
±10%
GRM022B31A332KE19#
±20%
GRM022B31A332ME19#
±10%
GRM022B31A472KE19#
±20%
GRM022B31A472ME19#
±10%
GRM022B31A682KE19#
±20%
GRM022B31A682ME19#
±10%
GRM022B31A103KE19#
±20%
GRM022B31A103ME19#
±20%
GRM022R71A680MA01#
100pF
±10%
GRM022R71A101KA01#
±20%
GRM022R71A101MA01#
150pF
±10%
GRM022R71A151KA01#
±20%
GRM022R71A151MA01#
±10%
GRM022R71A221KA01#
±20%
GRM022R71A221MA01#
±10%
GRM022R71A331KA01#
±20%
GRM022R71A331MA01#
±10%
GRM022R71A471KA01#
±20%
GRM022R71A471MA01#
±10%
GRM022R61A680KA01#
±20%
GRM022R61A680MA01#
±10%
GRM022R61A101KA01#
680pF
±20%
GRM022R60J681ME19#
±20%
GRM022R61A101MA01#
1000pF
±20%
GRM022R60J102ME19#
±10%
GRM022R61A151KA01#
1500pF
±20%
GRM022R60J152ME19#
±20%
GRM022R61A151MA01#
2200pF
±20%
GRM022R60J222ME19#
220pF
±10%
GRM022R61A221KA01#
3300pF
±20%
GRM022R60J332ME19#
±20%
GRM022R61A221MA01#
4700pF
±20%
GRM022R60J472ME19#
330pF
±10%
GRM022R61A331KA01#
6800pF
±20%
GRM022R60J682ME19#
±20%
GRM022R61A331MA01#
10000pF
±20%
GRM022R60J103ME19#
±10%
GRM022R61A471KA01#
15000pF
±20%
GRM022R60J153ME15#
Derating
±20%
GRM022R61A471MA01#
22000pF
±10%
GRM022R60J223KE15#
Derating
±10%
GRM022R61A681KE19#
±20%
GRM022R60J223ME15#
Derating
±20%
GRM022R61A681ME19#
33000pF
±20%
GRM022R60J333ME15#
Derating
±10%
GRM022R61A102KE19#
47000pF
±20%
GRM022R60J473ME15#
Derating
±20%
GRM022R61A102ME19#
68000pF
±20%
GRM022R60J683ME15#
Derating
1500pF
±10%
GRM022R61A152KE19#
0.1µF
±20%
GRM022R60J104ME15#
Derating
±20%
GRM022R61A152ME19#
680pF
±20%
GRM022B30J681ME19#
2200pF
±10%
GRM022R61A222KE19#
1000pF
±20%
GRM022B30J102ME19#
±20%
GRM022R61A222ME19#
1500pF
±20%
GRM022B30J152ME19#
±10%
GRM022R61A332KE19#
2200pF
±20%
GRM022B30J222ME19#
±20%
GRM022R61A332ME19#
3300pF
±20%
GRM022B30J332ME19#
4700pF
±10%
GRM022R61A472KE19#
4700pF
±20%
GRM022B30J472ME19#
±20%
GRM022R61A472ME19#
6800pF
±20%
GRM022B30J682ME19#
6800pF
±10%
GRM022R61A682KE19#
10000pF
±20%
GRM022B30J103ME19#
±20%
GRM022R61A682ME19#
X5R 15000pF
±10%
GRM022R60G153KE15#
±10%
GRM022R61A103KE19#
±20%
GRM022R60G153ME15#
±20%
GRM022R61A103ME19#
22000pF
±10%
GRM022R60G223KE15#
±10%
GRM022B11A680KA01#
±20%
GRM022R60G223ME15#
±20%
GRM022B11A680MA01#
33000pF
±10%
GRM022R60G333KE15#
±10%
GRM022B11A101KA01#
±20%
GRM022R60G333ME15#
±20%
GRM022B11A101MA01#
±10%
GRM022R60G473KE15#
150pF
±10%
GRM022B11A151KA01#
±20%
GRM022R60G473ME15#
±20%
GRM022B11A151MA01#
68000pF
±20%
GRM022R60G683ME15#
220pF
±10%
GRM022B11A221KA01#
0.1µF
±20%
GRM022R60G104ME15#
±20%
GRM022B11A221MA01#
±10%
GRM022B11A331KA01#
±20%
GRM022B11A331MA01#
±10%
GRM022B11A471KA01#
±20%
GRM022B11A471MA01#
470pF
Low ESL
LLp Series
Tol.
GRM022R71A680KA01#
330pF
68pF
100pF
150pF
High-Q Type
GJM Series
470pF
680pF
High Frequency
GQM Series
1000pF
Monolithic Microchip
GMA Series
3300pF
10000pF
For Bonding
GMD Series
B
Part Number
Cap.
±10%
68pF
220pF
X5R
Tol.
Rated
TC
Voltage Code
68pF
100pF
Product Information
330pF
470pF
1000pF
3300pF
4700pF
6800pF
10000pF
6.3Vdc
X5R
B
4Vdc
47000pF
Part number # indicates the package specification code.
64
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series High Dielectric Constant Type Part Number List
GRM033R61E151KA01#
For General Purpose
GRM Series
GRM033R61E101KA01#
±10%
GRM033R71H101MA12#
330pF
±10%
GRM033R61E331KA01#
150pF
±10%
GRM033R71H151KA12#
470pF
±10%
GRM033R61E471KA01#
±20%
GRM033R71H151MA12#
680pF
±10%
GRM033R61E681KA01#
220pF
±10%
GRM033R71H221KA12#
1000pF
±10%
GRM033R61E102KA01#
±20%
GRM033R71H221MA12#
10000pF
±10%
GRM033R61E103KA12#
Derating
±10%
GRM033R71H331KA12#
±20%
GRM033R61E103MA12#
Derating
±20%
GRM033R71H331MA12#
100pF
±10%
GRM033B11E101KA01#
±10%
GRM033R71H471KA12#
150pF
±10%
GRM033B11E151KA01#
±20%
GRM033R71H471MA12#
220pF
±10%
GRM033B11E221KA01#
±10%
GRM033R71H681KA12#
330pF
±10%
GRM033B11E331KA01#
±20%
GRM033R71H681MA12#
470pF
±10%
GRM033B11E471KA01#
±10%
GRM033R71H102KA12#
680pF
±10%
GRM033B11E681KA01#
±20%
GRM033R71H102MA12#
1000pF
±10%
GRM033B11E102KA01#
±10%
GRM033R71H152KA12#
±20%
GRM033B11E102MA01#
±20%
GRM033R71H152MA12#
1500pF
±10%
GRM033B11E152KA01#
±10%
GRM033B31H101KA12#
±20%
GRM033B11E152MA01#
±20%
GRM033B31H101MA12#
±10%
GRM033B31E222KA12#
150pF
±10%
GRM033B31H151KA12#
±20%
GRM033B31E222MA12#
±20%
GRM033B31H151MA12#
±10%
GRM033B31E332KA12#
220pF
±10%
GRM033B31H221KA12#
±20%
GRM033B31E332MA12#
±20%
GRM033B31H221MA12#
±10%
GRM033B31H331KA12#
±20%
GRM033B31H331MA12#
±10%
GRM033B31H471KA12#
±20%
GRM033B31H471MA12#
±10%
1500pF
100pF
330pF
B
2200pF
3300pF
10000pF
±10%
GRM033B31E103KA12#
Derating
±20%
GRM033B31E103MA12#
Derating
±10%
GRM033R71C222KA88#
X7R
2200pF
3300pF
±10%
GRM033R71C332KA88#
R
2200pF
±10%
GRM033R11C222KA88#
GRM033B31H681KA12#
3300pF
±10%
GRM033R11C332KA88#
±20%
GRM033B31H681MA12#
X5R 10000pF
±10%
GRM033R61C103KA12#
±10%
GRM033B31H102KA12#
±20%
GRM033R61C103MA12#
±20%
GRM033B31H102MA12#
0.1µF
±10%
GRM033R61C104KE84#
Derating
±10%
GRM033B31H152KA12#
±20%
GRM033R61C104ME84#
Derating
±20%
GRM033B31H152MA12#
2200pF
±10%
GRM033B31C222KA87#
100pF
±10%
GRM033R71E101KA01#
±20%
GRM033B31C222MA87#
150pF
±10%
GRM033R71E151KA01#
3300pF
±10%
GRM033B31C332KA87#
220pF
±10%
GRM033R71E221KA01#
±20%
GRM033B31C332MA87#
330pF
±10%
GRM033R71E331KA01#
±10%
GRM033B31C103KA12#
470pF
±10%
GRM033R71E471KA01#
±20%
GRM033B31C103MA12#
680pF
±10%
GRM033R71E681KA01#
1000pF
±10%
GRM033R71E102KA01#
1500pF
±10%
GRM033R71E152KA01#
2200pF
±10%
GRM033R71E222KA12#
±20%
GRM033R71E222MA12#
±10%
GRM033R71E332KA12#
±20%
GRM033R71E332MA12#
100pF
±10%
GRM033R11E101KA01#
150pF
±10%
GRM033R11E151KA01#
220pF
±10%
GRM033R11E221KA01#
330pF
±10%
GRM033R11E331KA01#
470pF
±10%
GRM033R11E471KA01#
680pF
±10%
GRM033R11E681KA01#
1000pF
±10%
GRM033R11E102KA01#
1500pF
±10%
GRM033R11E152KA01#
470pF
680pF
1000pF
1500pF
3300pF
16Vdc
Low ESL
LLp Series
GRM033R61E221KA01#
±20%
B
10000pF
±10%
GRM033B31C104KE84#
Derating
±20%
GRM033B31C104ME84#
Derating
4700pF
±10%
GRM033R71A472KA01#
±20%
GRM033R71A472MA01#
6800pF
±10%
GRM033R71A682KA01#
±20%
GRM033R71A682MA01#
±10%
GRM033R71A103KA01#
±20%
GRM033R71A103MA01#
±10%
GRM033R11A472KA01#
±20%
GRM033R11A472MA01#
±10%
GRM033R11A682KA01#
±20%
GRM033R11A682MA01#
±10%
GRM033R11A103KA01#
±20%
GRM033R11A103MA01#
±10%
GRM033R61A472KA01#
0.1µF
10Vdc
X7R
10000pF
R
4700pF
6800pF
10000pF
X5R
4700pF
Capacitor Array
GNM Series
±10%
150pF
±10%
1000pF
R
100pF
220pF
680pF
X7R
X5R
GRM033R71H101KA12#
470pF
25Vdc
0.33mm 25Vdc
±10%
100pF
330pF
B
Part Number
Part Number
High-Q Type
GJM Series
X7R
Tol.
Tol.
High Frequency
GQM Series
0.33mm 50Vdc
Cap.
Cap.
Monolithic Microchip
GMA Series
Rated
TC
Voltage Code
Rated
TC
Voltage Code
For Bonding
GMD Series
T
max.
T
max.
Ultracompact
Product Information
c 0.6×0.3mm
Part number # indicates the package specification code.
65
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series High Dielectric Constant Type Part Number List
(→ c 0.6×0.3mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.33mm 10Vdc
X5R
Cap.
Tol.
4700pF
±20%
GRM033R61A472MA01#
6800pF
±10%
GRM033R61A682KA01#
±20%
Tol.
Part Number
±10%
GRM033R70J103KA01#
GRM033R10J472KA01#
GRM033R61A682MA01#
6800pF
±10%
GRM033R10J682KA01#
±10%
GRM033R61A103KA01#
10000pF
±10%
GRM033R10J103KA01#
±20%
GRM033R61A103MA01#
X6S 15000pF
±10%
GRM033C80J153KE01#
±10%
GRM033R61A123KE84#
±20%
GRM033C80J153ME01#
±20%
GRM033R61A123ME84#
22000pF
±10%
GRM033C80J223KE01#
±10%
GRM033R61A153KE84#
±20%
GRM033C80J223ME01#
±20%
GRM033R61A153ME84#
±10%
GRM033C80J333KE01#
18000pF
±10%
GRM033R61A183KE84#
±20%
GRM033C80J333ME01#
±20%
GRM033R61A183ME84#
±10%
GRM033C80J473KE19#
22000pF
±10%
GRM033R61A223KE84#
±20%
GRM033C80J473ME19#
±20%
GRM033R61A223ME84#
±10%
GRM033R61A273KE84#
±20%
GRM033R61A273ME84#
33000pF
±10%
GRM033R61A333KE84#
±20%
GRM033R61A333ME84#
39000pF
±10%
GRM033R61A393KE84#
X5R 10000pF
±20%
GRM033R61A393ME84#
15000pF
47000pF
±10%
GRM033R61A473KE84#
±20%
GRM033R61A473ME84#
±10%
GRM033R61A683KE84#
±20%
GRM033R61A683ME84#
±10%
GRM033R61A104KE84#
±20%
GRM033R61A104ME84#
0.22µF
±20%
GRM033R61A224ME90#
4700pF
±10%
GRM033B11A472KA01#
±20%
GRM033B11A472MA01#
±10%
15000pF
Capacitor Array
GNM Series
27000pF
Low ESL
LLp Series
68000pF
High-Q Type
GJM Series
0.1µF
0.33mm 6.3Vdc
X7R 10000pF
R
33000pF
47000pF
±10%
GRM033C80J683KE84#
Derating
±20%
GRM033C80J683ME84#
Derating
±10%
GRM033C80J104KE84#
Derating
±20%
GRM033C80J104ME84#
Derating
±20%
GRM033C80J224ME90#
Derating
±10%
GRM033R60J103KA01#
±10%
GRM033R60J153KE01#
±20%
GRM033R60J153ME01#
22000pF
±10%
GRM033R60J223KE01#
±20%
GRM033R60J223ME01#
33000pF
±10%
GRM033R60J333KE01#
±20%
GRM033R60J333ME01#
±10%
GRM033R60J473KE19#
±20%
GRM033R60J473ME19#
68000pF
0.1µF
0.22µF
47000pF
Derating
High Frequency
GQM Series
0.22µF
±20%
GRM033R60J224ME90#
4700pF
±10%
GRM033B10J472KA01#
GRM033B11A682KA01#
6800pF
±10%
GRM033B10J682KA01#
±20%
GRM033B11A682MA01#
10000pF
±10%
GRM033B10J103KA01#
10000pF
±10%
GRM033B11A103KA01#
15000pF
±10%
GRM033B10J153KE01#
±20%
GRM033B11A103MA01#
±20%
GRM033B10J153ME01#
12000pF
±10%
GRM033B31A123KE84#
22000pF
±10%
GRM033B10J223KE01#
±20%
GRM033B31A123ME84#
±20%
GRM033B10J223ME01#
±10%
GRM033B31A153KE84#
±10%
GRM033B10J333KE01#
±20%
GRM033B31A153ME84#
±20%
GRM033B10J333ME01#
18000pF
±10%
GRM033B31A183KE84#
47000pF
±10%
GRM033B30J473KE18#
±20%
GRM033B31A183ME84#
±20%
GRM033B30J473ME18#
22000pF
±10%
GRM033B31A223KE84#
0.22µF
±20%
GRM033C80G224ME90#
±20%
GRM033B31A223ME84#
±10%
GRM033B31A273KE84#
±20%
GRM033B31A273ME84#
±10%
GRM033B31A333KE84#
Cap.
Tol.
±20%
GRM033B31A333ME84#
±10%
GRM033B31A393KE84#
0.1µF
±10%
GRM152R61A104KE19#
Derating
±20%
GRM033B31A393ME84#
±20%
GRM152R61A104ME19#
Derating
±10%
GRM033B31A473KE84#
±10%
GRM152R61A224KE19#
Derating
±20%
GRM033B31A473ME84#
±20%
GRM152R61A224ME19#
Derating
±10%
GRM033B31A683KE84#
±10%
GRM152B31A104KE19#
Derating
±20%
GRM033B31A683ME84#
±20%
GRM152B31A104ME19#
Derating
±10%
GRM033B31A104KE84#
±10%
GRM152B31A224KE19#
Derating
±20%
GRM033B31A104ME84#
±20%
GRM152B31A224ME19#
Derating
4700pF
±10%
GRM033R70J472KA01#
±10%
GRM152C80J104KE19#
Derating
6800pF
±10%
GRM033R70J682KA01#
±20%
GRM152C80J104ME19#
Derating
6800pF
Monolithic Microchip
GMA Series
15000pF
27000pF
For Bonding
GMD Series
33000pF
39000pF
47000pF
Product Information
68000pF
0.1µF
X7R
Cap.
±10%
12000pF
6.3Vdc
Rated
TC
Voltage Code
4700pF
10000pF
B
T
max.
Part Number
B
33000pF
4Vdc
X6S
c 1.0×0.5mm
T
max.
Rated
TC
Voltage Code
0.22mm 10Vdc
X5R
0.22µF
B
0.1µF
0.22µF
6.3Vdc
X6S
0.1µF
Part Number
Part number # indicates the package specification code.
66
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series High Dielectric Constant Type Part Number List
4Vdc
X7T
GRM152C80J224KE19#
Derating
±20%
GRM152C80J224ME19#
Derating
±10%
GRM152R60J104KE19#
±20%
GRM152R60J104ME19#
0.22µF
±10%
GRM152R60J224KE19#
±20%
GRM152R60J224ME19#
0.47µF
±20%
GRM152R60J474ME15#
0.1µF
±10%
GRM152B30J104KE19#
±20%
GRM152B30J104ME19#
0.22µF
±10%
GRM152B30J224KE19#
±20%
GRM152B30J224ME19#
0.47µF
±20%
GRM152B30J474ME15#
Derating
0.1µF
±10%
GRM152D70G104KE15#
Derating
±20%
GRM152D70G104ME15#
Derating
±10%
GRM152D70G224KE15#
Derating
±20%
GRM152D70G224ME15#
Derating
±10%
GRM152C80G104KE19#
±20%
GRM152C80G104ME19#
±10%
GRM152C80G224KE19#
±20%
GRM152C80G224ME19#
0.1µF
0.22µF
X6S
0.1µF
0.22µF
2.5Vdc
X6T
0.47µF
±20%
GRM152D80G474ME15#
X7T
0.1µF
±10%
GRM152D70E104KE19#
±20%
GRM152D70E104ME19#
±10%
GRM152D70E224KE19#
±20%
50Vdc
220pF
X7R
R
B
16Vdc
X7R
GRM15XR71C332MA86#
±10%
GRM15XR71C472KA86#
±20%
GRM15XR71C472MA86#
±10%
GRM15XR71C682KA86#
±20%
GRM15XR71C682MA86#
±10%
GRM15XR71C103KA86#
±20%
GRM15XR71C103MA86#
±10%
GRM15XB11C332KA86#
±20%
GRM15XB11C332MA86#
4700pF
±10%
GRM15XB11C472KA86#
±20%
GRM15XB11C472MA86#
6800pF
±10%
GRM15XB11C682KA86#
±20%
GRM15XB11C682MA86#
±10%
GRM15XB11C103KA86#
±20%
GRM15XB11C103MA86#
X5R 15000pF
±10%
GRM15XR61A153KA86#
±20%
GRM15XR61A153MA86#
22000pF
±10%
GRM15XR61A223KA86#
±20%
GRM15XR61A223MA86#
±10%
GRM15XR61A333KA86#
±20%
GRM15XR61A333MA86#
6800pF
10000pF
Derating
B
3300pF
10000pF
10Vdc
33000pF
1.0µF
±20%
GRM153R61A105ME95#
Derating
±20%
GRM153B31A105ME95#
Derating
X6T
1.0µF
±20%
GRM153D80J105ME95#
Derating
GRM152D70E224ME19#
X5R
1.0µF
±20%
GRM153R60J105ME95#
±10%
GRM15XR71H221KA86#
B
1.0µF
±20%
GRM153B30J105ME95#
330pF
±10%
GRM15XR71H331KA86#
X6T
1.0µF
±20%
GRM153D80G105ME95#
470pF
±10%
GRM15XR71H471KA86#
X5R
1.0µF
±20%
GRM153R60G105ME95#
680pF
±10%
GRM15XR71H681KA86#
0.55mm 100Vdc X7R
220pF
±10%
GRM155R72A221KA01#
1000pF
±10%
GRM15XR71H102KA86#
330pF
±10%
GRM155R72A331KA01#
1500pF
±10%
GRM15XR71H152KA86#
470pF
±10%
GRM155R72A471KA01#
220pF
±10%
GRM15XR11H221KA86#
680pF
±10%
GRM155R72A681KA01#
330pF
±10%
GRM15XR11H331KA86#
1000pF
±10%
GRM155R72A102KA01#
470pF
±10%
GRM15XR11H471KA86#
1500pF
±10%
GRM155R72A152KA01#
680pF
±10%
GRM15XR11H681KA86#
2200pF
±10%
GRM155R72A222KA01#
1000pF
±10%
GRM15XR11H102KA86#
3300pF
±10%
GRM155R72A332KA01#
1500pF
±10%
GRM15XR11H152KA86#
4700pF
±10%
GRM155R72A472KA01#
220pF
±10%
GRM15XB11H221KA86#
220pF
±10%
GRM155R71H221KA01#
±20%
GRM15XB11H221MA86#
330pF
±10%
GRM155R71H331KA01#
±10%
GRM15XB11H331KA86#
470pF
±10%
GRM155R71H471KA01#
±20%
GRM15XB11H331MA86#
680pF
±10%
GRM155R71H681KA01#
470pF
±10%
GRM15XB11H471KA86#
1000pF
±10%
GRM155R71H102KA01#
±20%
GRM15XB11H471MA86#
1500pF
±10%
GRM155R71H152KA01#
680pF
±10%
GRM15XB11H681KA86#
2200pF
±10%
GRM155R71H222KA01#
±20%
GRM15XB11H681MA86#
3300pF
±10%
GRM155R71H332KA01#
±10%
GRM15XB11H102KA86#
4700pF
±10%
GRM155R71H472KA01#
±20%
GRM15XB11H102MA86#
6800pF
±10%
GRM155R71H682KA88#
±10%
GRM15XB11H152KA86#
10000pF
±10%
GRM155R71H103KA88#
±20%
GRM15XB11H152MA86#
15000pF
±10%
GRM155R71H153KA12#
±10%
GRM15XR71E222KA86#
22000pF
±10%
GRM155R71H223KA12#
±20%
GRM15XR71E222MA86#
0.1µF
±10%
GRM155R71H104KE14#
±10%
GRM15XB11E222KA86#
±20%
GRM155R71H104ME14#
±20%
GRM15XB11E222MA86#
±10%
GRM155C71H333KE19#
±10%
GRM15XR71C332KA86#
±20%
GRM155C71H333ME19#
1500pF
B
±20%
4700pF
1.0µF
1000pF
X7R
3300pF
X7R
B
330pF
25Vdc
16Vdc
Part Number
X5R
0.22µF
0.3mm
0.3mm
Tol.
Capacitor Array
GNM Series
±10%
Cap.
Low ESL
LLp Series
B
0.22µF
Rated
TC
Voltage Code
2200pF
2200pF
3300pF
0.33mm 10Vdc
6.3Vdc
4Vdc
50Vdc
X7R
X7S 33000pF
High-Q Type
GJM Series
X5R
Part Number
High Frequency
GQM Series
X6S
Tol.
Monolithic Microchip
GMA Series
0.22mm 6.3Vdc
T
max.
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
For General Purpose
GRM Series
(→ c 1.0×0.5mm)
Part number # indicates the package specification code.
67
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series High Dielectric Constant Type Part Number List
(→ c 1.0×0.5mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.55mm 50Vdc
Cap.
Part Number
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
0.1µF
±10%
GRM155B31H104KE14#
±20%
GRM155B31H104ME14#
6800pF
±10%
GRM155R71E682KA01#
GRM155C71H473KE19#
±20%
GRM155C71H473ME19#
±10%
GRM155C71H683KE19#
±20%
GRM155C71H683ME19#
10000pF
±10%
GRM155R71E103KA01#
220pF
±10%
GRM155R11H221KA01#
15000pF
±10%
GRM155R71E153KA61#
330pF
±10%
GRM155R11H331KA01#
22000pF
±10%
GRM155R71E223KA61#
470pF
±10%
GRM155R11H471KA01#
33000pF
±10%
GRM155R71E333KA88#
680pF
±10%
GRM155R11H681KA01#
47000pF
±10%
GRM155R71E473KA88#
1000pF
±10%
GRM155R11H102KA01#
0.1µF
±10%
GRM155R71E104KE14#
1500pF
±10%
GRM155R11H152KA01#
±20%
GRM155R71E104ME14#
2200pF
±10%
GRM155R11H222KA01#
6800pF
±10%
GRM155R11E682KA01#
3300pF
±10%
GRM155R11H332KA01#
10000pF
±10%
GRM155R11E103KA01#
4700pF
±10%
GRM155R11H472KA01#
15000pF
±10%
GRM155R11E153KA61#
6800pF
±10%
GRM155R11H682KA88#
22000pF
±10%
GRM155R11E223KA61#
10000pF
±10%
GRM155R11H103KA88#
33000pF
±10%
GRM155R11E333KA88#
47000pF
±10%
GRM155R11E473KA88#
X6S 68000pF
±10%
GRM155C81E683KA12#
±10%
GRM155C81E104KA12#
±20%
GRM155C81E104MA12#
±10%
GRM155R61E683KA87#
±20%
GRM155R61E683MA87#
±10%
GRM155R61E104KA87#
±20%
GRM155R61E104MA87#
68000pF
Capacitor Array
GNM Series
Low ESL
LLp Series
0.1µF
±10%
±20%
GRM155C81H104ME14#
X5R
1000pF
±10%
GRM155R61H102KA01#
2200pF
±10%
GRM155R61H222KA01#
4700pF
±10%
GRM155R61H472KA01#
33000pF
±10%
GRM155R61H333KE19#
±20%
GRM155R61H333ME19#
47000pF
±10%
GRM155R61H473KE19#
±20%
GRM155R61H473ME19#
±10%
GRM155R61H683KE19#
±20%
GRM155R61H683ME19#
±10%
±20%
±10%
GRM155B11H221KA01#
±20%
GRM155B11H221MA01#
330pF
±10%
GRM155B11H331KA01#
±20%
GRM155B11H331MA01#
470pF
±10%
GRM155B11H471KA01#
±20%
GRM155B11H471MA01#
±10%
GRM155B11H681KA01#
±20%
GRM155B11H681MA01#
1000pF
±10%
GRM155B11H102KA01#
±20%
GRM155B11H102MA01#
1500pF
±10%
GRM155B11H152KA01#
±20%
GRM155B11H152MA01#
±10%
GRM155B11H222KA01#
±20%
GRM155B11H222MA01#
±10%
GRM155B11H332KA01#
±20%
GRM155B11H332MA01#
±10%
±20%
High-Q Type
GJM Series
X6S
GRM155C81H104KE14#
68000pF
0.1µF
High Frequency
GQM Series
B
T
max.
±10%
X7S 47000pF
R
Tol.
220pF
Monolithic Microchip
GMA Series
680pF
2200pF
For Bonding
GMD Series
3300pF
4700pF
6800pF
Product Information
10000pF
15000pF
22000pF
0.55mm 50Vdc
25Vdc
B
X7R
R
0.1µF
X5R 68000pF
0.1µF
±10%
GRM155R61E105KA12#
Derating
±20%
GRM155R61E105MA12#
Derating
4700pF
±10%
GRM155B11E472KA01#
GRM155R61H104KE14#
6800pF
±10%
GRM155B11E682KA01#
GRM155R61H104ME14#
10000pF
±10%
GRM155B11E103KA01#
±20%
GRM155B11E103MA01#
±10%
GRM155B11E153KA61#
±20%
GRM155B11E153MA61#
±10%
GRM155B11E223KA61#
±20%
GRM155B11E223MA61#
±10%
GRM155B31E333KA87#
±20%
GRM155B31E333MA87#
±10%
GRM155B31E473KA87#
±20%
GRM155B31E473MA87#
±10%
GRM155B31E683KA87#
±20%
GRM155B31E683MA87#
±10%
GRM155B31E104KA87#
±20%
GRM155B31E104MA87#
±10%
GRM155B31E105KA12#
Derating
Derating
1.0µF
B
15000pF
22000pF
33000pF
47000pF
68000pF
0.1µF
1.0µF
±20%
GRM155B31E105MA12#
X7R 33000pF
±10%
GRM155R71C333KA01#
GRM155B11H472KA01#
47000pF
±10%
GRM155R71C473KA01#
GRM155B11H472MA01#
68000pF
±10%
GRM155R71C683KA88#
±10%
GRM155B31H682KA88#
0.15µF
±10%
GRM155R71C154KA12#
±20%
GRM155B31H682MA88#
±10%
GRM155B31H103KA88#
±20%
16Vdc
0.22µF
±10%
GRM155R71C224KA12#
33000pF
±10%
GRM155R11C333KA01#
GRM155B31H103MA88#
47000pF
±10%
GRM155R11C473KA01#
±10%
GRM155B31H153KA12#
68000pF
±10%
GRM155R11C683KA88#
±20%
GRM155B31H153MA12#
X5R 33000pF
±10%
GRM155R61C333KA01#
±10%
GRM155B31H223KA12#
47000pF
±10%
GRM155R61C473KA01#
±20%
GRM155B31H223MA12#
68000pF
±10%
GRM155R61C683KA88#
R
Part number # indicates the package specification code.
68
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series High Dielectric Constant Type Part Number List
(→ c 1.0×0.5mm)
33000pF
±10%
GRM155B11C333KA01#
47000pF
±10%
GRM155B11C473KA01#
68000pF
±10%
GRM155B31C683KA87#
1.0µF
±10%
GRM155B31C105KA12#
±20%
GRM155B31C105MA12#
±10%
GRM155R71A683KA01#
±20%
GRM155R71A683MA01#
X7R 68000pF
B
±10%
GRM155R11A683KA01#
±20%
GRM155R11A683MA01#
X6S
1.0µF
±10%
GRM155C81A105KA12#
±20%
GRM155C81A105MA12#
±10%
GRM155R61A154KE19#
±20%
GRM155R61A154ME19#
0.22µF
±10%
GRM155R61A224KE19#
±20%
GRM155R61A224ME19#
0.33µF
±10%
GRM155R61A334KE15#
±20%
GRM155R61A334ME15#
±10%
GRM155R61A474KE15#
±20%
GRM155R61A474ME15#
±10%
GRM155R61A684KE15#
±20%
GRM155R61A684ME15#
±10%
GRM155R61A225KE95#
Derating
±20%
GRM155R61A225ME95#
Derating
0.15µF
±10%
GRM155B31A154KE18#
±20%
GRM155B31A154ME18#
0.22µF
±10%
GRM155B31A224KE18#
±20%
GRM155B31A224ME18#
±10%
GRM155B31A334KE14#
±20%
GRM155B31A334ME14#
0.47µF
±10%
GRM155B31A474KE14#
±20%
GRM155B31A474ME14#
0.68µF
±10%
GRM155B31A684KE15#
±20%
GRM155B31A684ME15#
2.2µF
±10%
GRM155B31A225KE95#
Derating
±20%
GRM155B31A225ME95#
Derating
±10%
GRM155R70J105KA12#
Derating
±20%
GRM155R70J105MA12#
Derating
±10%
GRM155C80J154KE01#
±20%
GRM155C80J154ME01#
±10%
GRM155C80J224KE01#
±20%
GRM155C80J224ME01#
T
max.
±10%
GRM155C80J334KE01#
0.5mm
±20%
GRM155C80J334ME01#
±10%
GRM155C80J474KE19#
±20%
GRM155C80J474ME19#
±10%
GRM155C80J225KE95#
Derating
±20%
GRM155C80J225ME95#
Derating
±10%
GRM155R60J154KE01#
±20%
GRM155R60J154ME01#
±10%
GRM155R60J224KE01#
±20%
±10%
0.47µF
0.68µF
2.2µF
B
0.33µF
X7R
X6S
1.0µF
0.15µF
0.22µF
0.33µF
0.47µF
2.2µF
X5R
0.15µF
0.22µF
0.33µF
0.33µF
±20%
GRM155R60J334ME01#
0.47µF
±10%
GRM155R60J474KE19#
±20%
GRM155R60J474ME19#
±10%
GRM155R60J684KE19#
±20%
GRM155R60J684ME19#
±10%
GRM155R60J225KE95#
±20%
GRM155R60J225ME95#
±10%
GRM155B10J154KE01#
±20%
GRM155B10J154ME01#
0.22µF
±10%
GRM155B10J224KE01#
±20%
GRM155B10J224ME01#
0.33µF
±10%
GRM155B10J334KE01#
±20%
GRM155B10J334ME01#
±10%
GRM155B30J474KE18#
±20%
GRM155B30J474ME18#
0.68µF
±10%
GRM155B30J684KE18#
±20%
GRM155B30J684ME18#
2.2µF
±10%
GRM155B30J225KE95#
±20%
GRM155B30J225ME95#
±10%
GRM155R70G105KA12#
±20%
GRM155R70G105MA12#
±10%
GRM155C80G154KE01#
±20%
GRM155C80G154ME01#
±10%
GRM155C80G224KE01#
±20%
GRM155C80G224ME01#
0.33µF
±10%
GRM155C80G334KE01#
±20%
GRM155C80G334ME01#
0.47µF
±10%
GRM155C80G474KE01#
±20%
GRM155C80G474ME01#
±10%
GRM155D80G225KE95#
±20%
GRM155D80G225ME95#
±20%
GRM155R60J475ME47#
Derating
Derating
2.2µF
68000pF
0.15µF
X5R
0.68µF
R
X5R
6.3Vdc
0.55mm 6.3Vdc
0.15µF
0.47µF
4Vdc
X7R
X6S
1.0µF
0.15µF
0.22µF
X6T
0.6mm 6.3Vdc
X5R
Part Number
2.2µF
4.7µF
For General Purpose
GRM Series
GRM155R61C105MA12#
Tol.
Capacitor Array
GNM Series
GRM155R61C105KA12#
±20%
Cap.
Low ESL
LLp Series
10Vdc
±10%
Rated
TC
Voltage Code
High-Q Type
GJM Series
B
1.0µF
T
max.
Part Number
B
4.7µF
±20%
GRM155B30J475ME47#
4Vdc
X5R
4.7µF
±20%
GRM155R60G475ME47#
B
4.7µF
±20%
GRM155B30G475ME47#
2.5Vdc
X6T
4.7µF
±20%
GRM155D80E475ME47#
4Vdc
X5R
10µF
±20%
GRM155R60G106ME44#
2.5Vdc
X5R
10µF
±20%
GRM155R60E106ME16#
Cap.
Tol.
1.0µF
±10%
GRM185R61E105KA12#
Derating
±20%
GRM185R61E105MA12#
Derating
±10%
GRM185B31E105KA12#
Derating
±20%
GRM185B31E105MA12#
Derating
±10%
GRM185R61C105KE44#
±20%
GRM185R61C105ME44#
±10%
GRM185B31C105KE43#
±20%
GRM185B31C105ME43#
220pF
±10%
GRM188R72A221KA01#
GRM155R60J224ME01#
330pF
±10%
GRM188R72A331KA01#
GRM155R60J334KE01#
470pF
±10%
GRM188R72A471KA01#
0.7mm
Derating
c 1.6×0.8mm
Rated
TC
Voltage Code
25Vdc
X5R
B
16Vdc
X5R
B
0.9mm 100Vdc X7R
1.0µF
1.0µF
1.0µF
High Frequency
GQM Series
X5R
Tol.
Monolithic Microchip
GMA Series
0.55mm 16Vdc
Cap.
Part Number
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
Part number # indicates the package specification code.
69
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series High Dielectric Constant Type Part Number List
(→ c 1.6×0.8mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.9mm 100Vdc X7R
Cap.
Tol.
Capacitor Array
GNM Series
680pF
±10%
GRM188R72A681KA01#
1000pF
±10%
GRM188R72A102KA01#
1500pF
±10%
GRM188R72A152KA01#
2200pF
±10%
GRM188R72A222KA01#
3300pF
±10%
GRM188R72A332KA01#
4700pF
±10%
GRM188R72A472KA01#
6800pF
±10%
GRM188R72A682KA01#
10000pF
±10%
GRM188R72A103KA01#
15000pF
±10%
GRM188R72A153KAC4#
±20%
GRM188R72A153MAC4#
±10%
GRM188R72A223KAC4#
±20%
GRM188R72A223MAC4#
0.1µF
±10%
GRM188R72A104KA35#
220pF
±10%
GRM188R71H221KA01#
330pF
±10%
GRM188R71H331KA01#
470pF
±10%
GRM188R71H471KA01#
22000pF
50Vdc
X7R
Low ESL
LLp Series
High-Q Type
GJM Series
High Frequency
GQM Series
R
Monolithic Microchip
GMA Series
For Bonding
GMD Series
X5R
Part Number
Product Information
680pF
±10%
GRM188R71H681KA01#
1000pF
±10%
GRM188R71H102KA01#
1500pF
±10%
GRM188R71H152KA01#
2200pF
±10%
GRM188R71H222KA01#
3300pF
±10%
GRM188R71H332KA01#
4700pF
±10%
GRM188R71H472KA01#
6800pF
±10%
GRM188R71H682KA01#
10000pF
±10%
GRM188R71H103KA01#
15000pF
±10%
GRM188R71H153KA01#
22000pF
±10%
GRM188R71H223KA01#
33000pF
±10%
GRM188R71H333KA61#
47000pF
±10%
GRM188R71H473KA61#
68000pF
±10%
GRM188R71H683KA93#
0.1µF
±10%
GRM188R71H104KA93#
220pF
±10%
GRM188R11H221KA01#
330pF
±10%
GRM188R11H331KA01#
470pF
±10%
GRM188R11H471KA01#
680pF
±10%
GRM188R11H681KA01#
1000pF
±10%
GRM188R11H102KA01#
1500pF
±10%
GRM188R11H152KA01#
2200pF
±10%
GRM188R11H222KA01#
3300pF
±10%
GRM188R11H332KA01#
4700pF
±10%
GRM188R11H472KA01#
6800pF
±10%
GRM188R11H682KA01#
10000pF
±10%
GRM188R11H103KA01#
15000pF
±10%
GRM188R11H153KA01#
22000pF
±10%
GRM188R11H223KA01#
33000pF
±10%
GRM188R11H333KA61#
47000pF
±10%
GRM188R11H473KA61#
68000pF
±10%
GRM188R11H683KA93#
0.1µF
±10%
GRM188R11H104KA93#
1000pF
±10%
2200pF
±10%
4700pF
T
max.
0.9mm
Rated
TC
Voltage Code
50Vdc
X5R
B
Cap.
Tol.
0.47µF
±20%
GRM188R61H474MA12#
1.0µF
±10%
GRM188R61H105KAAL#
±20%
GRM188R61H105MAAL#
±10%
GRM188B11H221KA01#
±20%
GRM188B11H221MA01#
±10%
GRM188B11H331KA01#
±20%
GRM188B11H331MA01#
±10%
GRM188B11H471KA01#
±20%
GRM188B11H471MA01#
680pF
±10%
GRM188B11H681KA01#
±20%
GRM188B11H681MA01#
1000pF
±10%
GRM188B11H102KA01#
±20%
GRM188B11H102MA01#
±10%
GRM188B11H152KA01#
±20%
GRM188B11H152MA01#
2200pF
±10%
GRM188B11H222KA01#
±20%
GRM188B11H222MA01#
3300pF
±10%
GRM188B11H332KA01#
±20%
GRM188B11H332MA01#
±10%
GRM188B11H472KA01#
±20%
GRM188B11H472MA01#
±10%
GRM188B11H682KA01#
±20%
GRM188B11H682MA01#
±10%
GRM188B11H103KA01#
±20%
GRM188B11H103MA01#
15000pF
±10%
GRM188B11H153KA01#
±20%
GRM188B11H153MA01#
22000pF
±10%
GRM188B11H223KA01#
±20%
GRM188B11H223MA01#
±10%
GRM188B11H333KA61#
±20%
GRM188B11H333MA61#
±10%
GRM188B11H473KA61#
±20%
GRM188B11H473MA61#
±10%
GRM188B31H683KA92#
±20%
GRM188B31H683MA92#
±10%
GRM188B31H104KA92#
±20%
GRM188B31H104MA92#
±10%
GRM188B31H154KAC4#
±20%
GRM188B31H154MAC4#
±10%
GRM188B31H224KAC4#
±20%
GRM188B31H224MAC4#
±10%
GRM188B31H105KAAL#
220pF
330pF
470pF
1500pF
4700pF
6800pF
10000pF
33000pF
47000pF
68000pF
0.1µF
0.15µF
0.22µF
1.0µF
Part Number
±20%
GRM188B31H105MAAL#
X7R 15000pF
±10%
GRM188R71E153KA01#
22000pF
±10%
GRM188R71E223KA01#
±20%
GRM188R71E223MA01#
33000pF
±10%
GRM188R71E333KA01#
GRM188R61H102KA01#
47000pF
±10%
GRM188R71E473KA01#
GRM188R61H222KA01#
68000pF
±10%
GRM188R71E683KA01#
±10%
GRM188R61H472KA01#
0.15µF
±10%
GRM188R71E154KA01#
10000pF
±10%
GRM188R61H103KA01#
0.22µF
±10%
GRM188R71E224KA88#
22000pF
±10%
GRM188R61H223KA01#
0.47µF
±10%
GRM188R71E474KA12#
0.22µF
±10%
GRM188R61H224KAC4#
1.0µF
±10%
GRM188R71E105KA12#
0.47µF
±10%
GRM188R61H474KA12#
±20%
GRM188R71E105MA12#
25Vdc
Part number # indicates the package specification code.
70
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series High Dielectric Constant Type Part Number List
(→ c 1.6×0.8mm)
±20%
GRM188R71C105MA12#
±20%
GRM188R71C105ME15#
GRM188R11E153KA01#
GRM188R11E223KA01#
±20%
GRM188R11E223MA01#
X7S
0.68µF
±10%
GRM188C71C684KA12#
33000pF
±10%
GRM188R11E333KA01#
R
0.15µF
±10%
GRM188R11C154KA01#
47000pF
±10%
GRM188R11E473KA01#
0.22µF
±10%
GRM188R11C224KA01#
68000pF
±10%
GRM188R11E683KA01#
0.33µF
±10%
GRM188R11C334KA01#
0.15µF
±10%
GRM188R11E154KA01#
0.47µF
±10%
GRM188R11C474KA88#
0.22µF
±10%
GRM188R11E224KA88#
1.0µF
±10%
GRM188C81C105KA12#
1.0µF
±10%
GRM188C81E105KAAD#
±20%
GRM188C81C105MA12#
±20%
GRM188C81E105MAAD#
2.2µF
±10%
GRM188C81C225KA12#
±20%
GRM188C81C225MA12#
0.22µF
±10%
GRM188R61C224KA88#
0.68µF
±10%
GRM188R61C684KA75#
±20%
GRM188R61C684MA75#
0.9mm
16Vdc
X7R
X6S
0.1µF
±10%
GRM188R61E104KA01#
0.22µF
±10%
GRM188R61E224KA88#
0.47µF
±10%
GRM188R61E474KA12#
±20%
GRM188R61E474MA12#
±10%
GRM188R61E684KA75#
1.0µF
±10%
GRM188R61C105KA93#
±20%
GRM188R61E684MA75#
2.2µF
±10%
GRM188R61C225KE15#
±10%
GRM188R61E105KA12#
0.15µF
±10%
GRM188B11C154KA01#
±20%
GRM188R61E105MA12#
0.22µF
±10%
GRM188B11C224KA01#
±10%
GRM188R61E225KA12#
0.33µF
±10%
GRM188B11C334KA01#
±20%
GRM188R61E225MA12#
±20%
GRM188B11C334MA01#
2200pF
±10%
GRM188B11E222KA01#
0.68µF
±10%
GRM188B31C684KA75#
3300pF
±10%
GRM188B11E332KA01#
±20%
GRM188B31C684MA75#
4700pF
±10%
GRM188B11E472KA01#
1.0µF
±10%
GRM188B31C105KA92#
6800pF
±10%
GRM188B11E682KA01#
±20%
GRM188B31C105MA92#
10000pF
±10%
GRM188B11E103KA01#
2.2µF
±10%
GRM188B31C225KE14#
±20%
GRM188B11E103MA01#
0.33µF
±10%
GRM188R71A334KA61#
±10%
GRM188B11E153KA01#
±20%
GRM188R71A334MA61#
±20%
GRM188B11E153MA01#
0.47µF
±10%
GRM188R71A474KA61#
±10%
GRM188B11E223KA01#
0.68µF
±10%
GRM188R71A684KA61#
±20%
GRM188B11E223MA01#
±20%
GRM188R71A684MA61#
33000pF
±10%
GRM188B11E333KA01#
2.2µF
±10%
GRM188R71A225KE15#
±20%
GRM188B11E333MA01#
±20%
GRM188R71A225ME15#
47000pF
±10%
GRM188B11E473KA01#
2.2µF
±10%
GRM188D71A225KE34#
±20%
GRM188B11E473MA01#
±20%
GRM188D71A225ME34#
±10%
GRM188B11E683KA01#
±10%
GRM188C81A225KE34#
±20%
GRM188B11E683MA01#
±20%
GRM188C81A225ME34#
0.1µF
±10%
GRM188B11E104KA01#
0.33µF
±10%
GRM188R61A334KA61#
±20%
GRM188B11E104MA01#
±20%
GRM188R61A334MA61#
0.15µF
±10%
GRM188B11E154KA01#
0.68µF
±10%
GRM188R61A684KA61#
0.22µF
±10%
GRM188B31E224KA87#
±20%
GRM188R61A684MA61#
0.47µF
±10%
GRM188B31E474KA75#
±10%
GRM188R61A225KE34#
±20%
GRM188B31E474MA75#
±20%
GRM188R61A225ME34#
±10%
GRM188B31E684KA75#
±10%
GRM188B11A334KA61#
±20%
GRM188B31E684MA75#
±20%
GRM188B11A334MA61#
±10%
GRM188B31E105KA75#
±10%
GRM188B11A684KA61#
±20%
GRM188B31E105MA75#
±20%
GRM188B11A684MA61#
±10%
GRM188B31E225KA12#
2.2µF
±10%
GRM188B31A225KE33#
±20%
GRM188B31A225ME33#
1.0µF
±10%
GRM188R70J105KA01#
±20%
GRM188R70J105MA01#
±10%
GRM188C70J225KE20#
±20%
GRM188C70J225ME20#
±10%
GRM188C80J225KE19#
±20%
GRM188C80J225ME19#
15000pF
22000pF
68000pF
0.68µF
1.0µF
2.2µF
±20%
GRM188B31E225MA12#
0.15µF
±10%
GRM188R71C154KA01#
0.22µF
±10%
GRM188R71C224KA01#
0.33µF
±10%
GRM188R71C334KA01#
0.47µF
±10%
GRM188R71C474KA88#
1.0µF
±10%
GRM188R71C105KA12#
±10%
GRM188R71C105KE15#
X5R
B
10Vdc
X7R
X7T
X6S
X5R
2.2µF
2.2µF
B
0.33µF
0.68µF
6.3Vdc
X7R
X7S
X6S
2.2µF
2.2µF
Capacitor Array
GNM Series
1.0µF
±10%
For General Purpose
GRM Series
Part Number
±10%
2.2µF
X7R
Tol.
15000pF
1.0µF
16Vdc
Cap.
22000pF
0.68µF
B
Rated
TC
Voltage Code
Low ESL
LLp Series
X5R
T
max.
High-Q Type
GJM Series
X6S
Part Number
High Frequency
GQM Series
R
Tol.
Monolithic Microchip
GMA Series
25Vdc
Cap.
For Bonding
GMD Series
0.9mm
Rated
TC
Voltage Code
Product Information
T
max.
Part number # indicates the package specification code.
71
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series High Dielectric Constant Type Part Number List
(→ c 1.6×0.8mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.9mm 6.3Vdc
X6S
T
max.
Cap.
Tol.
Part Number
4.7µF
±10%
GRM188C80J475KE15#
Derating
±20%
GRM188C80J475ME15#
Derating
Capacitor Array
GNM Series
X5R
10µF
±20%
GRM188R60J106ME47#
B
10µF
±20%
GRM188B30J106ME47#
X6S
4.7µF
±10%
GRM188C80G475KE19#
±20%
GRM188C80G475ME19#
10µF
±20%
GRM188C80G106ME47#
X5R
10µF
±20%
GRM188R60G106ME47#
B
10µF
±20%
GRM188B30G106ME46#
2.5Vdc
X6S
10µF
±20%
GRM188C80E106ME47#
0.95mm 25Vdc
X5R
4.7µF
±10%
GRM188R61E475KE11#
16Vdc
X5R
4.7µF
±10%
GRM188R61C475KAAJ#
Derating
±20%
GRM188R61C475MAAJ#
Derating
±10%
GRM188B31C475KAAJ#
Derating
±20%
GRM188B31C475MAAJ#
Derating
Derating
4Vdc
B
Low ESL
LLp Series
1mm
4.7µF
10Vdc
B
10µF
±20%
GRM188B31A106ME69#
35Vdc
X5R
4.7µF
±10%
GRM188R6YA475KE15#
±20%
GRM188R6YA475ME15#
±10%
GRM188R61E475KE15#
±20%
GRM188R61E475ME15#
10µF
±20%
GRM188R61E106MA73#
25Vdc
16Vdc
High-Q Type
GJM Series
10Vdc
6.3Vdc
High Frequency
GQM Series
4Vdc
X5R
4.7µF
X6S
10µF
±20%
GRM188C81C106MA73#
X5R
10µF
±20%
GRM188R61C106MA73#
X7T
10µF
±20%
GRM188D71A106MA73#
Rated
TC
Voltage Code
0.95mm 50Vdc
B
Monolithic Microchip
GMA Series
0.7mm
0.33µF
±20%
GRM219B31H334MA87#
1.0µF
±10%
GRM219B31H105KA73#
±20%
GRM219B31H105MA73#
±10%
GRM219B31H225KE15#
±20%
GRM219B31H225ME15#
35Vdc
X6S
±10%
GRM219C8YA225KE15#
±20%
GRM219C8YA225ME15#
2.2µF
Derating
±10%
GRM219R6YA475KA73#
Derating
±20%
GRM219R6YA475MA73#
Derating
±10%
GRM219R71E683KA01#
±10%
GRM219R71E104KA01#
±20%
GRM219R71E104MA01#
0.68µF
±10%
GRM219R71E684KA88#
1.0µF
±10%
GRM219R71E105KA88#
R
68000pF
±10%
GRM219R11E683KA01#
X6S
2.2µF
±10%
GRM219C81E225KE15#
±20%
GRM219C81E225ME15#
X5R
2.2µF
±10%
GRM219R61E225KA12#
±20%
GRM219R61E225MA12#
±10%
GRM219R61E475KA73#
±20%
GRM219R61E475MA73#
X5R
25Vdc
Part Number
4.7µF
X7R 68000pF
0.1µF
4.7µF
10µF
B
0.47µF
±10%
GRM219R61E106KA12#
Derating
±20%
GRM219R61E106MA12#
Derating
±10%
GRM219B31E474KA88#
X6S
10µF
±20%
GRM188C81A106MA73#
0.68µF
±10%
GRM219B31E684KA88#
X7T
10µF
±20%
GRM188D70J106MA73#
1.0µF
±10%
GRM219B31E105KA88#
X5R
22µF
±20%
GRM188R60J226MEA0#
Derating
2.2µF
±10%
GRM219B31E225KA75#
B
22µF
±20%
GRM188B30J226MEA0#
Derating
±20%
GRM219B31E225MA75#
X6S
22µF
±20%
GRM188C80G226MEA0#
Derating
X5R
22µF
±20%
GRM188R60G226MEA0#
B
22µF
±20%
GRM188B30G226MEA0#
Rated
TC
Voltage Code
25Vdc
X5R
16Vdc
X6S
Cap.
1.0µF
Tol.
16Vdc
Part Number
±10%
GRM216R61E105KA12#
±10%
GRM219B31E106KA12#
Derating
±20%
GRM219B31E106MA12#
Derating
±10%
GRM219R71C334KA88#
0.68µF
±10%
GRM219R71C684KA01#
2.2µF
±10%
GRM219R71C225KE15#
±20%
GRM219R71C225ME15#
10µF
X7R
0.33µF
R
0.68µF
±10%
GRM219R11C684KA01#
X6S
4.7µF
±10%
GRM219C81C475KA73#
±20%
GRM219C81C475MA73#
4.7µF
±10%
GRM219R61C475KE15#
10µF
±10%
GRM219R61C106KA73#
±20%
GRM219R61C106MA73#
0.68µF
±10%
GRM219B11C684KA01#
1.0µF
±10%
GRM216C81C105KA12#
6800pF
±10%
GRM219R72A682KA01#
10000pF
±10%
GRM219R72A103KA01#
±20%
GRM219R72A103MA01#
X7R 10000pF
±10%
GRM219R71H103KA01#
4.7µF
±10%
GRM219B31C475KE15#
±20%
GRM219R71H103MA01#
10µF
±10%
GRM219B31C106KA73#
15000pF
±10%
GRM219R71H153KA01#
±20%
GRM219B31C106MA73#
±20%
GRM219R71H153MA01#
±10%
GRM219R71A225KE15#
33000pF
±10%
GRM219R71H333KA01#
±20%
GRM219R71A225ME15#
0.33µF
±10%
GRM219R71H334KA88#
±10%
GRM219D71A475KE15#
Derating
R
33000pF
±10%
GRM219R11H333KA01#
±20%
GRM219D71A475ME15#
Derating
X5R
1.0µF
±10%
GRM219R61H105KA73#
X5R
22µF
±20%
GRM219R61A226MEA0#
Derating
±20%
GRM219R61H105MA73#
B
22µF
±20%
GRM219B31A226MEA0#
Derating
±10%
GRM219R61H225KE15#
X6S
10µF
±10%
GRM219C80J106KE39#
±20%
GRM219R61H225ME15#
±20%
GRM219C80J106ME39#
33000pF
±10%
GRM219B11H333KA01#
X5R
22µF
±20%
GRM219R60J226ME47#
Derating
0.33µF
±10%
GRM219B31H334KA87#
B
22µF
±20%
GRM219B30J226ME47#
Derating
0.95mm 100Vdc X7R
50Vdc
Tol.
2.2µF
c 2.0×1.25mm
T
max.
Cap.
For Bonding
GMD Series
Product Information
2.2µF
B
X5R
B
10Vdc
X7R
X7T
6.3Vdc
2.2µF
4.7µF
Part number # indicates the package specification code.
72
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series High Dielectric Constant Type Part Number List
47µF
±20%
GRM219R60G476ME44#
GRM21BB11E154KA01#
0.22µF
±10%
0.22µF
±10%
GRM21BB11E224KA01#
GRM21AR72A224KAC5#
0.33µF
±10%
0.33µF
GRM21BB11E334KA01#
±10%
GRM21AR72A334KAC5#
2.2µF
±10%
GRM21BB31E225KA75#
±10%
GRM219R71H223KA17#
±20%
GRM21BB31E225MA75#
±20%
GRM219R71H223MA17#
4.7µF
±10%
GRM21BB31E475KA75#
1.35mm 100Vdc X7R 10000pF
±10%
GRM21BR72A103KA01#
±20%
GRM21BB31E475MA75#
15000pF
±10%
GRM21BR72A153KA01#
±10%
GRM21BR71C225KA12#
22000pF
±10%
GRM21BR72A223KA01#
±20%
GRM21BR71C225MA12#
33000pF
±10%
GRM21BR72A333KA01#
X6S
4.7µF
±10%
GRM21BC81C475KA88#
47000pF
±10%
GRM21BR72A473KA01#
X5R
2.2µF
±10%
GRM21BR61C225KA88#
68000pF
±10%
GRM21BR72A683KAC4#
4.7µF
±10%
GRM21BR61C475KA88#
±20%
GRM21BR72A683MAC4#
10µF
±10%
GRM21BR61C106KE15#
±10%
GRM21BR72A104KAC4#
±20%
GRM21BR61C106ME15#
±20%
GRM21BR72A104MAC4#
±10%
GRM21BB31C225KA87#
X7R 47000pF
±10%
GRM21BR71H473KA01#
4.7µF
±10%
GRM21BB31C475KA87#
68000pF
±10%
GRM21BR71H683KA01#
10µF
±10%
GRM21BB31C106KE15#
0.1µF
±10%
GRM21BR71H104KA01#
±20%
GRM21BB31C106ME15#
±20%
GRM21BR71H104MA01#
±10%
GRM21BC81A106KE18#
0.15µF
±10%
GRM21BR71H154KA01#
±20%
GRM21BC81A106ME18#
0.22µF
±10%
GRM21BR71H224KA01#
±10%
GRM21BC80J106KE19#
0.47µF
±10%
GRM21BR71H474KA88#
±20%
GRM21BC80J106ME19#
1.0µF
±10%
GRM21BR71H105KA12#
0.47µF
±10%
GRM21BR72A474KA73#
47000pF
±10%
GRM21BR11H473KA01#
2.2µF
±10%
GRM21BR61H225KA73#
68000pF
±10%
GRM21BR11H683KA01#
±20%
GRM21BR61H225MA73#
0.1µF
±10%
GRM21BR11H104KA01#
±10%
GRM21BR61H475KE51#
±20%
GRM21BR11H104MA01#
±20%
GRM21BR61H475ME51#
±10%
GRM21BB31H225KA73#
±20%
GRM21BB31H225MA73#
4.7µF
±10%
GRM21BB31H475KE51#
±20%
GRM21BB31H475ME51#
1.0µF
±10%
GRM21BR71E105KA99#
2.2µF
±10%
GRM21BR71E225KA73#
X7R 22000pF
0.1µF
50Vdc
R
Derating
16Vdc
X7R
B
10Vdc
6.3Vdc
X6S
X6S
1.4mm 100Vdc X7R
50Vdc
X5R
2.2µF
2.2µF
10µF
10µF
4.7µF
X5R
1.0µF
±10%
GRM21BR61H105KA12#
B
47000pF
±10%
GRM21BB11H473KA01#
68000pF
±10%
GRM21BB11H683KA01#
0.1µF
±10%
GRM21BB11H104KA01#
±20%
GRM21BB11H104MA01#
±10%
GRM21BB31H154KA88#
±20%
GRM21BB31H154MA88#
R
1.0µF
±10%
GRM21BR11E105KA99#
±10%
GRM21BB31H224KA88#
X5R
10µF
±10%
GRM21BR61E106KA73#
±20%
GRM21BB31H224MA88#
±20%
GRM21BR61E106MA73#
±10%
GRM21BB31H474KA87#
1.0µF
±10%
GRM21BB31E105KA98#
±20%
GRM21BB31H474MA87#
10µF
±10%
GRM21BB31E106KA73#
±10%
GRM21BB31H684KAC4#
±20%
GRM21BB31E106MA73#
±20%
GRM21BB31H684MAC4#
±10%
GRM21BR71C475KA73#
1.0µF
±10%
GRM21BB31H105KA12#
±20%
GRM21BR71C475MA73#
±20%
GRM21BB31H105MA12#
±10%
GRM21BC81C106KA73#
0.1µF
±10%
GRM21BR71E104KA01#
±20%
GRM21BC81C106MA73#
0.15µF
±10%
GRM21BR71E154KA01#
±10%
GRM21BR71A475KA73#
0.1µF
±10%
GRM21BR11E104KA01#
±20%
GRM21BR71A475MA73#
0.15µF
±10%
GRM21BR11E154KA01#
10µF
±10%
GRM21BR71A106KE51#
±20%
GRM21BR11E154MA01#
±20%
GRM21BR71A106ME51#
0.68µF
±10%
GRM21BR11E684KA88#
B
22µF
±20%
GRM21BB31A226ME51#
X6S
4.7µF
±10%
GRM21BC81E475KA12#
X7R
10µF
±10%
GRM21BR70J106KE76#
±20%
GRM21BC81E475MA12#
±20%
GRM21BR70J106ME76#
X5R
2.2µF
±10%
GRM21BR61E225KA12#
X6S
22µF
±20%
GRM21BC80J226ME51#
±20%
GRM21BR61E225MA12#
X5R
22µF
±20%
GRM21BR60J226ME39#
±10%
GRM21BR61E475KA12#
B
22µF
±20%
GRM21BB30J226ME38#
0.15µF
0.22µF
0.47µF
0.68µF
25Vdc
1.35mm 25Vdc
X7R
R
4.7µF
B
25Vdc
X7R
B
16Vdc
X7R
X6S
10Vdc
6.3Vdc
X7R
2.2µF
4.7µF
10µF
4.7µF
Capacitor Array
GNM Series
GRM21BR61E475MA12#
±10%
50Vdc
GRM219C80G106ME19#
Low ESL
LLp Series
±20%
0.15µF
100Vdc X7R
GRM219C80G106KE19#
±20%
High-Q Type
GJM Series
4.7µF
B
1mm
±10%
High Frequency
GQM Series
X5R
X5R
10µF
Monolithic Microchip
GMA Series
Part Number
X6S
Part Number
Rated
TC
Voltage Code
Tol.
4Vdc
Tol.
T
max.
Cap.
0.95mm
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Derating
Derating
Part number # indicates the package specification code.
73
Product Information
T
max.
For General Purpose
GRM Series
(→ c 2.0×1.25mm)
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series High Dielectric Constant Type Part Number List
(→ c 2.0×1.25mm)
T
max.
Rated
TC
Voltage Code
T
max.
For General Purpose
GRM Series
Cap.
Tol.
Part Number
X7U
22µF
±20%
GRM21BE70G226ME51#
X6S
22µF
±20%
GRM21BC80G226ME39#
1.45mm 25Vdc
X5R
22µF
±20%
GRM21BR61E226ME44#
6.3Vdc
X5R
47µF
±20%
GRM21BR60J476ME15#
Derating
B
47µF
±20%
GRM21BB30J476ME15#
Derating
Derating
1.4mm
4Vdc
4Vdc
X6S
47µF
±20%
GRM21BC80G476ME15#
X5R
47µF
±20%
GRM21BR60G476ME15#
B
47µF
±20%
GRM21BB30G476ME15#
Rated
TC
Voltage Code
1.25mm 16Vdc
Capacitor Array
GNM Series
0.7mm
Rated
TC
Voltage Code
25Vdc
Low ESL
LLp Series
16Vdc
Cap.
Tol.
High-Q Type
GJM Series
10µF
±10%
GRM31MC81C106KA12#
B
0.68µF
±10%
GRM31MB11C684KA01#
0.47µF
±10%
GRM31MR72A474KA35#
±20%
GRM31MR72A474MA35#
0.68µF
±10%
GRM31MR72A684KA35#
25Vdc
2.2µF
±10%
GRM31MB31E225KA92#
1.0µF
±10%
GRM31CR72A105KA01#
2.2µF
±10%
GRM31CR71H225KA88#
4.7µF
±10%
GRM31CR71H475KA12#
X5R
2.2µF
±10%
GRM31CR61H225KA88#
B
2.2µF
±10%
GRM31CB31H225KA87#
±20%
GRM31CB31H225MA87#
±10%
GRM31CB31H475KA12#
±20%
GRM31CB31H475MA12#
4.7µF
±10%
GRM31CR71E475KA88#
10µF
±10%
GRM31CR71E106KA12#
±20%
GRM31CR71E106MA12#
10µF
±10%
GRM31CC81E106KE15#
±20%
GRM31CC81E106MA12#
10µF
±10%
GRM31CR61E106KA12#
22µF
±20%
GRM31CR61E226ME15#
10µF
±10%
GRM31CB31E106KA75#
22µF
±20%
GRM31CB31E226ME15#
4.7µF
±20%
GRM31CR71C475MA01#
10µF
±10%
GRM31CR71C106KAC7#
±20%
GRM31CR71C106MAC7#
B
1.8mm 100Vdc X7R
50Vdc
2.2µF
±10%
GRM316R61E225KA12#
B
2.2µF
±10%
GRM316B31E225KA75#
±10%
GRM316C81C225KA12#
2.2µF
±10%
GRM319R72A153KA01#
0.1µF
±10%
GRM319R72A104KA01#
25Vdc
X7R
X7R
X6S
50Vdc
X7R
0.33µF
±10%
GRM319R71H334KA01#
35Vdc
X5R
10µF
±10%
GRM319R6YA106KA12#
Derating
±20%
GRM319R6YA106MA12#
Derating
16Vdc
X6S
4.7µF
0.95mm 100Vdc X7R 15000pF
25Vdc
Part Number
Part Number
X5R
X6S
Tol.
1.3mm 100Vdc X7R
c 3.2×1.6mm
T
max.
Cap.
X5R
High Frequency
GQM Series
X7R
0.33µF
±10%
GRM319R71E334KA01#
R
0.33µF
±10%
GRM319R11E334KA01#
B
0.33µF
±10%
GRM319B11E334KA01#
0.68µF
±10%
GRM319B11E684KA01#
X6S
4.7µF
±10%
GRM319C81C475KA12#
X5R
10µF
±10%
GRM319R61C106KE15#
R
4.7µF
±20%
GRM31CR11C475MA01#
±20%
GRM319R61C106ME15#
X6S
22µF
±20%
GRM31CC81C226ME15#
0.47µF
±10%
GRM319B11C474KA01#
X5R
10µF
±10%
GRM31CR61C106KA88#
10µF
±10%
GRM319B31C106KE15#
22µF
±20%
GRM31CR61C226ME15#
±20%
GRM319B31C106ME15#
10µF
±10%
GRM31CB31C106KA88#
B
22µF
±20%
GRM319R61A226ME15#
B
22µF
±20%
GRM319B31A226ME15#
X6S
22µF
±20%
X5R
22µF
B
22µF
16Vdc
X7R
B
22µF
±20%
GRM31CB31C226ME15#
X7R
22µF
±20%
GRM31CR71A226ME15#
GRM319C80J226ME15#
X6S
22µF
±20%
GRM31CC81A226ME19#
±20%
GRM319R60J226ME15#
X5R
22µF
±20%
GRM31CR61A226ME19#
±20%
GRM319B30J226ME15#
47µF
±20%
GRM31CR61A476ME15#
1.25mm 100Vdc X7R 22000pF
±10%
GRM31MR72A223KA01#
22µF
±20%
GRM31CB31A226ME19#
33000pF
±10%
GRM31MR72A333KA01#
47000pF
±10%
GRM31MR72A473KA01#
68000pF
±10%
0.15µF
10Vdc
6.3Vdc
Monolithic Microchip
GMA Series
X5R
B
For Bonding
GMD Series
50Vdc
X7R
B
Product Information
47µF
±20%
GRM31CB31A476ME15#
X7R
22µF
±20%
GRM31CR70J226ME19#
GRM31MR72A683KA01#
X7U
47µF
±20%
GRM31CE70J476ME15#
±10%
GRM31MR72A154KA01#
X6S
22µF
±20%
GRM31CC80J226ME19#
0.22µF
±10%
GRM31MR72A224KA01#
47µF
±20%
GRM31CC80J476ME18#
0.15µF
±10%
GRM31MR71H154KA01#
X5R
47µF
±20%
GRM31CR60J476ME19#
0.22µF
±10%
GRM31MR71H224KA01#
B
47µF
±20%
GRM31CB30J476ME18#
0.47µF
±10%
GRM31MR71H474KA01#
X7U
47µF
±20%
GRM31CE70G476ME15#
0.68µF
±10%
GRM31MR71H684KA88#
X6S
47µF
±20%
GRM31CC80G476ME19#
1.0µF
±10%
GRM31MR71H105KA88#
1.9mm 100Vdc X7R
2.2µF
±10%
GRM31CR72A225KA73#
±20%
GRM31CR72A225MA73#
X6T
100µF
±20%
GRM31CD80J107ME39#
X5R
100µF
±20%
GRM31CR60J107ME39#
6.3Vdc
4Vdc
0.15µF
±10%
GRM31MR11H154KA01#
0.22µF
±10%
GRM31MR11H224KA01#
0.15µF
±10%
GRM31MB11H154KA01#
0.22µF
±10%
GRM31MB11H224KA01#
X7U
100µF
±20%
GRM31CE70G107ME39#
1.0µF
±10%
GRM31MB31H105KA87#
X6T
100µF
±20%
GRM31CD80G107ME39#
X5R
10µF
±20%
GRM31MR61E106MA12#
X5R
100µF
±20%
GRM31CR60G107ME39#
B
0.22µF
±10%
GRM31MB11E224KA01#
R
B
25Vdc
10Vdc
6.3Vdc
4Vdc
Derating
Derating
Derating
Part number # indicates the package specification code.
74
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Oct.1,2012
GRM Series High Dielectric Constant Type Part Number List
4Vdc
150µF
±20%
GRM32RC60J157ME15#
Derating
X6T
150µF
±20%
GRM32RD80G157ME15#
Derating
X5S
150µF
±20%
GRM32RC60G157ME15#
X6T
150µF
±20%
GRM32RD80E157ME15#
50Vdc
X7R
0.68µF
±10%
GRM32NR71H684KA01#
B
0.68µF
±10%
GRM32NB11H684KA01#
X6S
22µF
±20%
GRM32NC81A226ME19#
0.68µF
±10%
GRM32CR72A684KA01#
10Vdc
1.8mm 100Vdc X7R
1.0µF
±10%
GRM32CR72A105KA35#
X7R
10µF
±10%
GRM32DR71E106KA12#
X6S
10µF
±10%
GRM32DC81E106KA12#
2.7mm 100Vdc X7R
2.2µF
±10%
GRM32ER72A225KA35#
±20%
GRM32ER72A225MA35#
4.7µF
±10%
GRM32ER71H475KA88#
10µF
±10%
GRM32ER71H106KA12#
10µF
±10%
GRM32ER61H106KA12#
±20%
GRM32ER61H106MA12#
4.7µF
±10%
GRM32EB31H475KA87#
10µF
±10%
GRM32EB31H106KA12#
±20%
GRM32EB31H106MA12#
X7R
10µF
±10%
GRM32ER7YA106KA12#
X5R
10µF
±10%
GRM32ER6YA106KA12#
B
10µF
±10%
GRM32EB3YA106KA12#
X7R
22µF
±20%
GRM32ER71E226ME15#
2.2mm
25Vdc
50Vdc
X7R
X5R
B
35Vdc
25Vdc
16Vdc
10Vdc
6.3Vdc
4Vdc
X6S
22µF
±20%
GRM32EC81E226ME15#
X5R
22µF
±20%
GRM32ER61E226ME15#
B
22µF
±20%
GRM32EB31E226ME15#
X7R
22µF
±20%
GRM32ER71C226MEA8#
X6S
47µF
±20%
GRM32EC81C476ME15#
X5R
47µF
±20%
GRM32ER61C476ME15#
B
22µF
±20%
GRM32EB31C226ME16#
47µF
±20%
GRM32EB31C476ME15#
X7R
47µF
±20%
GRM32ER71A476ME15#
X6S
47µF
±20%
GRM32EC81A476ME19#
X5R
47µF
±20%
GRM32ER61A476ME20#
B
47µF
±20%
GRM32EB31A476ME20#
X7R
47µF
±20%
GRM32ER70J476ME20#
X7U
100µF
±20%
GRM32EE70J107ME15#
X6S
47µF
±20%
GRM32EC80J476ME64#
100µF
±20%
GRM32EC80J107ME20#
X5R
100µF
±20%
GRM32ER60J107ME20#
B
100µF
±20%
GRM32EB30J107ME16#
X7U
100µF
±20%
GRM32EE70G107ME19#
X6S
100µF
±20%
GRM32EC80G107ME20#
Low ESL
LLp Series
2.5Vdc
Capacitor Array
GNM Series
X5S
High-Q Type
GJM Series
1.5mm
Part Number
High Frequency
GQM Series
6.3Vdc
Tol.
Derating
Monolithic Microchip
GMA Series
1mm
Cap.
Derating
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
For General Purpose
GRM Series
c 3.2×2.5mm
Part number # indicates the package specification code.
75
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors
Capacitor Array GNM Series
For General Purpose
GRM Series
Ideal for reducing the mounting area and mounting costs.
P
P
1
2
3
4
T
T
1 2 3 4
Capacitor Array
GNM Series
W
8
L
2 Elements
1 The number of parts can be reduced.
2 Also contributes to the low profile of the set.
Low ESL
LLp Series
3 Ideal for decoupling and smoothing.
4 Reduction of environmental impact substances is possible.
(Accommodates 2 or 4 times the number of individual chips per reel.)
High-Q Type
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
76
7
6
L
4 Elements
5
W
8 7 6 5
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
B
±20%
GNM1M2B11C473MA01#
22000pF
±20%
GNM0M2R61C223ME18#
0.1µF
±20%
GNM1M2B11C104MA01#
47000pF
±20%
GNM0M2R61C473ME18#
X7R 22000pF
±20%
GNM1M2R71A223MA01#
47000pF
±20%
GNM1M2R71A473MA01#
22000pF
±20%
GNM1M2R11A223MA01#
10Vdc
0.1µF
±20%
GNM0M2R61C104ME18#
10000pF
±20%
GNM0M2B31C103ME18#
22000pF
±20%
GNM0M2B31C223ME18#
47000pF
±20%
GNM1M2R11A473MA01#
47000pF
±20%
GNM0M2B31C473ME18#
X5R 22000pF
±20%
GNM1M2R61A223MA01#
0.1µF
±20%
GNM0M2B31C104ME18#
47000pF
±20%
GNM1M2R61A473MA01#
X5R 10000pF
±20%
GNM0M2R61A103ME17#
22000pF
±20%
GNM0M2R61A223ME17#
47000pF
±20%
0.1µF
10000pF
R
0.1µF
±20%
GNM1M2R61A104MA01#
22000pF
±20%
GNM1M2B11A223MA01#
GNM0M2R61A473ME17#
47000pF
±20%
GNM1M2B11A473MA01#
±20%
GNM0M2R61A104ME17#
0.1µF
±20%
GNM1M2B11A104MA01#
±20%
GNM0M2B31A103ME17#
0.22µF
±20%
GNM1M2R61C224ME18#
22000pF
±20%
GNM0M2B31A223ME17#
1.0µF
±20%
GNM1M2R61C105ME18#
47000pF
±20%
GNM0M2B31A473ME17#
B
1.0µF
±20%
GNM1M2B31C105ME18#
0.1µF
±20%
GNM0M2B31A104ME17#
X5R
1.0µF
±20%
GNM1M2R61A105ME17#
X5R
1.0µF
±20%
GNM0M2R60G105ME17#
2.2µF
±20%
GNM1M2R61A225ME18#
B
1.0µF
±20%
GNM0M2B30G105ME17#
0.22µF
±20%
GNM1M2B31A224ME17#
0.47µF
±20%
GNM1M2B31A474ME17#
1.0µF
±20%
GNM1M2B31A105ME17#
2.2µF
±20%
GNM1M2B31A225ME18#
X5R
2.2µF
±20%
GNM1M2R60J225ME18#
B
2.2µF
±20%
GNM1M2B30J225ME18#
B
0.8mm
16Vdc
10Vdc
X5R
B
0.7mm
50Vdc
25Vdc
X7R
0.1µF
Tol.
Part Number
±20%
GNM1M2R71C104MAA1#
R
0.1µF
±20%
GNM1M2R11C104MAA1#
X5R
1.0µF
±20%
GNM1M2R61C105MEA2#
c 4 Elements 2.0×1.25mm
B
0.1µF
±20%
GNM1M2B11C104MAA1#
X5R
1.0µF
±20%
GNM1M2R61A105MEA4#
B
1.0µF
±20%
GNM1M2B31A105MEA4#
X7R
1000pF
±20%
GNM1M2R71H102MA01#
R
R
1000pF
±20%
GNM1M2R11H102MA01#
B
X5R
1000pF
±20%
GNM1M2R61H102MA01#
X5R
B
1000pF
±20%
GNM1M2B11H102MA01#
X7R
2200pF
±20%
GNM1M2R71E222MA01#
4700pF
±20%
GNM1M2R71E472MA01#
10000pF
±20%
GNM1M2R71E103MA01#
2200pF
±20%
GNM1M2R11E222MA01#
4700pF
±20%
GNM1M2R11E472MA01#
10000pF
±20%
GNM1M2R11E103MA01#
2200pF
±20%
GNM1M2R61E222MA01#
R
X5R
T
max.
Rated
TC
Voltage Code
0.55mm 16Vdc
10Vdc
Cap.
Tol.
Part Number
0.1µF
±20%
GNM214R71C104MAA1#
0.1µF
±20%
GNM214R11C104MAA1#
0.1µF
±20%
GNM214B11C104MAA1#
0.22µF
±20%
GNM214R61A224MEA2#
1.0µF
±20%
GNM214R61A105MEA2#
0.22µF
±20%
GNM214B31A224MEA2#
1.0µF
±20%
GNM214B31A105MEA2#
0.22µF
±20%
GNM214R60J224MEA2#
1.0µF
±20%
GNM214R60J105MEA2#
0.22µF
±20%
GNM214B30J224MEA2#
1.0µF
±20%
GNM214B30J105MEA2#
X7R
470pF
±20%
GNM214R71H471MA01#
X7R
B
6.3Vdc
X5R
B
0.7mm
50Vdc
4700pF
±20%
GNM1M2R61E472MA01#
1000pF
±20%
GNM214R71H102MA01#
10000pF
±20%
GNM1M2R61E103MA01#
R
1000pF
±20%
GNM214R11H102MA01#
2200pF
±20%
GNM1M2B11E222MA01#
B
470pF
±20%
GNM214B11H471MA01#
4700pF
±20%
GNM1M2B11E472MA01#
1000pF
±20%
GNM214B11H102MA01#
10000pF
±20%
GNM1M2B11E103MA01#
2200pF
±20%
GNM214R71E222MA01#
X7R 22000pF
±20%
GNM1M2R71C223MA01#
4700pF
±20%
GNM214R71E472MA01#
47000pF
±20%
GNM1M2R71C473MA01#
10000pF
±20%
GNM214R71E103MA01#
0.1µF
±20%
GNM1M2R71C104MA01#
2200pF
±20%
GNM214R11E222MA01#
22000pF
±20%
GNM1M2R11C223MA01#
4700pF
±20%
GNM214R11E472MA01#
47000pF
±20%
GNM1M2R11C473MA01#
10000pF
±20%
GNM214R11E103MA01#
0.1µF
±20%
GNM1M2R11C104MA01#
2200pF
±20%
GNM214B11E222MA01#
±20%
GNM1M2R61C223MA01#
4700pF
±20%
GNM214B11E472MA01#
B
16Vdc
Cap.
6.3Vdc
R
X5R 22000pF
25Vdc
X7R
R
B
High Frequency
GQM Series
10Vdc
GNM1M2B11C223MA01#
47000pF
Rated
TC
Voltage Code
0.55mm 16Vdc
GNM1M2R61C473MA01#
±20%
GNM0M2R61C103ME18#
c 2 Elements 1.37×1.0mm
T
max.
±20%
22000pF
X5R 47000pF
Capacitor Array
GNM Series
16Vdc
Low ESL
LLp Series
0.7mm
±20%
B
4Vdc
Part Number
X5R 10000pF
B
10Vdc
Tol.
Part Number
Monolithic Microchip
GMA Series
16Vdc
Cap.
Tol.
For Bonding
GMD Series
0.5mm
Rated
TC
Voltage Code
Cap.
Product Information
T
max.
Rated
TC
Voltage Code
High-Q Type
GJM Series
T
max.
c 2 Elements 0.9×0.6mm
For General Purpose
GRM Series
GNM Series High Dielectric Constant Type Part Number List
Part number # indicates the package specification code.
77
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Oct.1,2012
GNM Series High Dielectric Constant Type Part Number List
(→ c 4 Elements 2.0×1.25mm)
T
max.
For General Purpose
GRM Series
0.7mm
Rated
TC
Voltage Code
25Vdc
0.95mm 16Vdc
Part Number
10000pF
±20%
GNM214B11E103MA01#
±20%
GNM214R71C223MA01#
47000pF
±20%
GNM214R71C473MA01#
0.1µF
±20%
GNM214R71C104MA01#
22000pF
±20%
GNM214R11C223MA01#
47000pF
±20%
GNM214R11C473MA01#
0.1µF
±20%
GNM214R11C104MA01#
22000pF
±20%
GNM214B11C223MA01#
47000pF
±20%
GNM214B11C473MA01#
0.1µF
±20%
GNM214B11C104MA01#
X5R
1.0µF
±20%
GNM214R61A105ME17#
B
1.0µF
±20%
GNM214B31A105ME17#
X5R
1.0µF
±20%
GNM214R60J105ME17#
B
1.0µF
±20%
GNM214B30J105ME17#
B
B
Capacitor Array
GNM Series
6.3Vdc
Tol.
X7R 22000pF
R
10Vdc
Cap.
Low ESL
LLp Series
High-Q Type
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
Part number # indicates the package specification code.
78
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors
LLL Series
Low
ESL
For General Purpose
GRM Series
Low ESL LLL/LLR/LLA/LLM Series
Ideal decoupling solution for equipment having advanced features.
T
W
Capacitor Array
GNM Series
L
1 Ideal for IC decoupling of high-speed operating equipment, due to the low inductance value (ESL value).
2 LW reversed geometry type/multi-terminal type and a large lineup of capacitors are available according to performance
requirements.
Low ESL capacitor that suppresses the anti-resonance in circuits.
Low ESL
LLp Series
LLR Series
T
W
High-Q Type
GJM Series
L
1 Reduces the anti-resonance generated in the high-frequency range.
2 An optimal ESR value can be selected from four types, according to the characteristics of the circuit.
LLA Series
High Frequency
GQM Series
3 The low ESL type, is also ideal as a decoupling component.
Ideal decoupling solution for equipment having advanced features.
P
1
2
3
4
T
1 3 5 7
7
6
W
5
L
2 4 6 8
Monolithic Microchip
GMA Series
8
1 Ideal for IC decoupling of high-speed operating equipment, due to the low inductance value (ESL value).
2 LW reversed geometry type/multi-terminal type and a large lineup of capacitors are available according to performance
requirements.
P
1
2
3
4
10
T
8
7
L
6
5
W
1 3 5 7 9
2 4 6 8 10
Product Information
9
For Bonding
GMD Series
LLM Series Ideal decoupling solution for equipment having advanced features.
1 Ideal for IC decoupling of high-speed operating equipment, due to the low inductance value (ESL value).
2 LW reversed geometry type/multi-terminal type and a large lineup of capacitors are available according to performance
requirements.
79
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LLL Series High Dielectric Constant Type
T
max.
c 0.5×1.0mm
For General Purpose
GRM Series
T
max.
Rated
TC
Voltage Code
0.35mm 6.3Vdc
4Vdc
X6S
X7S
Cap.
Tol.
Part Number
0.1µF
±20%
LLL153C80J104ME01#
0.22µF
±20%
LLL153C80J224ME14#
0.47µF
±20%
LLL153C70G474ME17#
c 0.8×1.6mm
Capacitor Array
GNM Series
T
max.
0.5mm
Rated
TC
Voltage Code
Cap.
Tol.
Low
ESL
Rated
TC
Voltage Code
X7R 10000pF
±20%
LLL185R71E103MA11#
X7R 22000pF
±20%
LLL185R71C223MA11#
47000pF
±20%
LLL185R71C473MA11#
4Vdc
X7S
±20%
LLL215C70G105MA11#
X7R 10000pF
±20%
LLL216R71H103MA01#
22000pF
±20%
LLL216R71H223MA01#
X7R 47000pF
±20%
LLL216R71E473MA01#
0.1µF
±20%
LLL216R71E104MA01#
25Vdc
10Vdc
X7R
0.22µF
±20%
LLL216R71A224MA01#
0.95mm 16Vdc
X7R
0.22µF
±20%
LLL219R71C224MA01#
10Vdc
X7R
0.47µF
±20%
LLL219R71A474MA01#
1.0µF
±20%
LLL219R71A105MA01#
2.2µF
±20%
LLL219C70G225MA01#
Cap.
Tol.
Low ESL
LLp Series
0.1µF
±20%
LLL185R71A104MA11#
X7S
0.22µF
±20%
LLL185C70G224MA11#
T
max.
0.55mm
4Vdc
X7S
1.0µF
±20%
LLL185C70G105ME01#
0.5mm
2.2µF
±20%
LLL185C70G225ME01#
0.6mm
50Vdc
X7R
2200pF
±20%
LLL185R71H222MA01#
4700pF
±20%
LLL185R71H472MA01#
X7R 10000pF
±20%
LLL185R71E103MA01#
16Vdc
22000pF
±20%
LLL185R71E223MA01#
16Vdc
X7R 47000pF
±20%
LLL185R71C473MA01#
10Vdc
X7R
0.1µF
±20%
LLL185R71A104MA01#
0.22µF
±20%
LLL185R71A224MA01#
0.47µF
±20%
LLL185C70G474MA01#
0.8mm
High-Q Type
GJM Series
High Frequency
GQM Series
0.5mm
Cap.
Tol.
Rated
TC
Voltage Code
Part Number
50Vdc
X7R 10000pF
±20%
LLL315R71H103MA11#
22000pF
±20%
LLL315R71H223MA11#
25Vdc
X7R 47000pF
±20%
LLL315R71E473MA11#
0.1µF
±20%
LLL315R71E104MA11#
X7R
0.22µF
±20%
LLL315R71C224MA11#
10Vdc
X7R
0.47µF
±20%
LLL315R71A474MA11#
50Vdc
X7R 10000pF
±20%
LLL317R71H103MA01#
22000pF
±20%
LLL317R71H223MA01#
47000pF
±20%
LLL317R71H473MA01#
25Vdc
X7R
0.1µF
±20%
LLL317R71E104MA01#
16Vdc
X7R
0.22µF
±20%
LLL317R71C224MA01#
0.47µF
±20%
LLL317R71C474MA01#
10Vdc
X7R
1.0µF
±20%
LLL317R71A105MA01#
6.3Vdc
X7R
2.2µF
±20%
LLL317R70J225MA01#
1.25mm 50Vdc
X7R
0.1µF
±20%
LLL31MR71H104MA01#
25Vdc
X7R
0.22µF
±20%
LLL31MR71E224MA01#
c 1.25×2.0mm
Rated
TC
Voltage Code
X7S
c 1.6×3.2mm
X7R
T
max.
1.0µF
Part Number
50Vdc
4Vdc
X7S
Tol.
0.7mm
10Vdc
4Vdc
Cap.
0.5mm
4Vdc
16Vdc
25Vdc
Part Number List
Part Number
25Vdc
Oct.1,2012
Part Number
Monolithic Microchip
GMA Series
50Vdc
X7R 10000pF
±20%
LLL215R71H103MA11#
25Vdc
X7R 22000pF
±20%
LLL215R71E223MA11#
0.47µF
±20%
LLL31MR71E474MA01#
16Vdc
X7R 47000pF
±20%
LLL215R71C473MA11#
16Vdc
X7R
1.0µF
±20%
LLL31MR71C105MA01#
0.1µF
±20%
LLL215R71C104MA11#
10Vdc
X7R
2.2µF
±20%
LLL31MR71A225MA01#
6.3Vdc
X7R
4.7µF
±20%
LLL31MR70J475MA01#
X5R
10µF
±20%
LLL31MR60J106ME01#
10Vdc
X7R
0.22µF
±20%
LLL215R71A224MA11#
6.3Vdc
X7R
0.47µF
±20%
LLL215R70J474MA11#
LLR Series High Dielectric Constant Type
Low
ESL
Part Number List
For Bonding
GMD Series
c 0.8×1.6mm
T
max.
0.55mm
Rated
TC
Voltage Code
4Vdc
X7S
Cap.
Tol.
ESR
Part Number
1.0µF
±20%
100mΩ LLR185C70G105ME01#
±20%
220mΩ LLR185C70G105ME03#
Product Information
±20%
470mΩ LLR185C70G105ME05#
±20%
1000mΩ LLR185C70G105ME07#
Part number # indicates the package specification code.
80
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
4Vdc
X7S
Cap.
Tol.
Part Number
Rated
TC
Voltage Code
Part Number
X7R 22000pF
±20%
LLA219R71E223MA01#
47000pF
±20%
LLA219R71E473MA01#
0.1µF
±20%
LLA219R71C104MA01#
0.22µF
±20%
LLA219R71C224MA01#
0.1µF
±20%
LLA185C70G104MA01#
0.22µF
±20%
LLA185C70G224MA01#
0.47µF
±20%
LLA185C70G474MA01#
10Vdc
X7R
0.47µF
±20%
LLA219R71A474MA01#
1.0µF
±20%
LLA185C70G105ME01#
6.3Vdc
X7R
1.0µF
±20%
LLA219R70J105MA01#
2.2µF
±20%
LLA185C70G225ME16#
4Vdc
X7S
2.2µF
±20%
LLA219C70G225MA01#
4.7µF
±20%
LLA219C70G475ME01#
Cap.
Tol.
c 2.0×1.25mm
T
max.
0.95mm 25Vdc
Tol.
16Vdc
X7R
c 3.2×1.6mm
Cap.
Tol.
Part Number
T
max.
Rated
TC
Voltage Code
Part Number
0.55mm 25Vdc
X7R 10000pF
±20%
LLA215R71E103MA14#
22000pF
±20%
LLA215R71E223MA14#
0.55mm 16Vdc
X7R
0.22µF
±20%
LLA315R71C224MA14#
16Vdc
X7R 47000pF
±20%
LLA215R71C473MA14#
10Vdc
X7R
0.47µF
±20%
LLA315R71A474MA14#
0.1µF
±20%
LLA215R71C104MA14#
6.3Vdc
X7R
1.0µF
±20%
LLA315R70J105MA14#
10Vdc
X7R
0.22µF
±20%
LLA215R71A224MA14#
2.2µF
±20%
LLA315R70J225MA14#
6.3Vdc
X7R
0.47µF
±20%
LLA215R70J474MA14#
0.95mm 16Vdc
X7R
0.47µF
±20%
LLA319R71C474MA01#
4Vdc
X7S
1.0µF
±20%
LLA215C70G105MA14#
10Vdc
X7R
1.0µF
±20%
LLA319R71A105MA01#
2.2µF
±20%
LLA215C70G225ME11#
1.25mm 16Vdc
X7R
1.0µF
±20%
LLA31MR71C105MA01#
4.7µF
±20%
LLA215C70G475ME19#
10Vdc
X7R
2.2µF
±20%
LLA31MR71A225MA01#
±20%
LLA219R71E103MA01#
0.95mm 25Vdc
For General Purpose
GRM Series
0.55mm
Rated
TC
Voltage Code
Cap.
X7R 10000pF
LLM Series High Dielectric Constant Type
Low
ESL
Low ESL
LLp Series
T
max.
Rated
TC
Voltage Code
Part Number List
Capacitor Array
GNM Series
T
max.
c 1.6×0.8mm
Low
ESL
Part Number List
Rated
TC
Voltage Code
0.55mm 25Vdc
16Vdc
6.3Vdc
4Vdc
Cap.
Tol.
Part Number
X7R 10000pF
±20%
LLM215R71E103MA11#
22000pF
±20%
LLM215R71E223MA11#
X7R 47000pF
±20%
LLM215R71C473MA11#
0.1µF
±20%
LLM215R71C104MA11#
0.22µF
±20%
LLM215R70J224MA11#
0.47µF
±20%
LLM215R70J474MA11#
1.0µF
±20%
LLM215C70G105MA11#
2.2µF
±20%
LLM215C70G225ME11#
Cap.
Tol.
X7R
X7S
Monolithic Microchip
GMA Series
T
max.
High Frequency
GQM Series
c 2.0×1.25mm
High-Q Type
GJM Series
LLA Series High Dielectric Constant Type
Oct.1,2012
Rated
TC
Voltage Code
0.55mm 16Vdc
X7R
Part Number
0.1µF
±20%
LLM315R71C104MA11#
0.22µF
±20%
LLM315R71C224MA11#
10Vdc
X7R
0.47µF
±20%
LLM315R71A474MA11#
6.3Vdc
X7R
2.2µF
±20%
LLM315R70J225MA11#
Product Information
T
max.
For Bonding
GMD Series
c 3.2×1.6mm
Part number # indicates the package specification code.
81
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors
High-Q Type GJM Series
HiQ
For General Purpose
GRM Series
Contributes to improvements in the reduction of power consumption and processing yield
by HiQ or low ESR.
e
g
e
Capacitor Array
GNM Series
T
W
L
1 Ideal for high-frequency decoupling applications.
2 HiQ and low ESR in VHF, UHF and microwave frequency bands.
Low ESL
LLp Series
3 Compatible to tight tolerances.
High-Q Type
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
82
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number
0.22mm 16Vdc
C0G
2.2pF
Part Number
±0.05pF GJM0225C1C2R2WB01#
±0.1pF GJM0225C1C2R2BB01#
0.2pF
±0.05pF GJM0225C1CR20WB01#
0.3pF
±0.05pF GJM0225C1CR30WB01#
0.4pF
±0.05pF GJM0225C1CR40WB01#
±0.1pF GJM0225C1CR40BB01#
±0.1pF GJM0225C1C2R4BB01#
0.5pF
±0.05pF GJM0225C1CR50WB01#
±0.25pF GJM0225C1C2R4CB01#
2.3pF
±0.1pF GJM0225C1C2R3BB01#
±0.1pF GJM0225C1CR30BB01#
0.6pF
0.7pF
0.8pF
1.0pF
1.1pF
1.2pF
2.5pF
±0.1pF GJM0225C1C2R5BB01#
±0.25pF GJM0225C1C2R5CB01#
±0.05pF GJM0225C1CR70WB01#
2.6pF
1.5pF
1.6pF
1.7pF
1.8pF
1.9pF
±0.1pF GJM0225C1C2R6BB01#
±0.05pF GJM0225C1CR80WB01#
±0.25pF GJM0225C1C2R6CB01#
2.7pF
±0.1pF GJM0225C1C2R7BB01#
±0.1pF GJM0225C1CR90BB01#
±0.25pF GJM0225C1C2R7CB01#
±0.05pF GJM0225C1C1R0WB01#
2.8pF
±0.05pF GJM0225C1C2R8WB01#
±0.1pF GJM0225C1C1R0BB01#
±0.1pF GJM0225C1C2R8BB01#
±0.25pF GJM0225C1C1R0CB01#
±0.25pF GJM0225C1C2R8CB01#
±0.05pF GJM0225C1C1R1WB01#
2.9pF
±0.05pF GJM0225C1C2R9WB01#
±0.1pF GJM0225C1C1R1BB01#
±0.1pF GJM0225C1C2R9BB01#
±0.25pF GJM0225C1C1R1CB01#
±0.25pF GJM0225C1C2R9CB01#
±0.05pF GJM0225C1C1R2WB01#
3.0pF
±0.05pF GJM0225C1C1R3WB01#
±0.05pF GJM0225C1C3R0WB01#
±0.1pF GJM0225C1C3R0BB01#
±0.25pF GJM0225C1C3R0CB01#
3.1pF
±0.05pF GJM0225C1C3R1WB01#
±0.1pF GJM0225C1C1R3BB01#
±0.1pF GJM0225C1C3R1BB01#
±0.25pF GJM0225C1C1R3CB01#
±0.25pF GJM0225C1C3R1CB01#
±0.05pF GJM0225C1C1R4WB01#
3.2pF
±0.05pF GJM0225C1C3R2WB01#
±0.1pF GJM0225C1C1R4BB01#
±0.1pF GJM0225C1C3R2BB01#
±0.25pF GJM0225C1C1R4CB01#
±0.25pF GJM0225C1C3R2CB01#
±0.05pF GJM0225C1C1R5WB01#
3.3pF
±0.05pF GJM0225C1C3R3WB01#
±0.1pF GJM0225C1C1R5BB01#
±0.1pF GJM0225C1C3R3BB01#
±0.25pF GJM0225C1C1R5CB01#
±0.25pF GJM0225C1C3R3CB01#
±0.05pF GJM0225C1C1R6WB01#
3.4pF
±0.05pF GJM0225C1C3R4WB01#
±0.1pF GJM0225C1C1R6BB01#
±0.1pF GJM0225C1C3R4BB01#
±0.25pF GJM0225C1C1R6CB01#
±0.25pF GJM0225C1C3R4CB01#
±0.05pF GJM0225C1C1R7WB01#
3.5pF
±0.05pF GJM0225C1C3R5WB01#
±0.1pF GJM0225C1C1R7BB01#
±0.1pF GJM0225C1C3R5BB01#
±0.25pF GJM0225C1C1R7CB01#
±0.25pF GJM0225C1C3R5CB01#
±0.05pF GJM0225C1C1R8WB01#
3.6pF
±0.05pF GJM0225C1C3R6WB01#
±0.1pF GJM0225C1C1R8BB01#
±0.1pF GJM0225C1C3R6BB01#
±0.25pF GJM0225C1C1R8CB01#
±0.25pF GJM0225C1C3R6CB01#
±0.05pF GJM0225C1C1R9WB01#
3.7pF
±0.05pF GJM0225C1C2R0WB01#
±0.05pF GJM0225C1C3R7WB01#
±0.1pF GJM0225C1C3R7BB01#
±0.25pF GJM0225C1C1R9CB01#
2.1pF
±0.05pF GJM0225C1C2R7WB01#
±0.05pF GJM0225C1CR90WB01#
±0.1pF GJM0225C1C1R9BB01#
2.0pF
±0.05pF GJM0225C1C2R6WB01#
±0.1pF GJM0225C1CR70BB01#
±0.25pF GJM0225C1C1R2CB01#
1.4pF
±0.05pF GJM0225C1C2R5WB01#
±0.1pF GJM0225C1CR60BB01#
±0.1pF GJM0225C1C1R2BB01#
1.3pF
±0.05pF GJM0225C1C2R4WB01#
±0.05pF GJM0225C1CR60WB01#
±0.1pF GJM0225C1CR80BB01#
0.9pF
±0.25pF GJM0225C1C2R3CB01#
2.4pF
±0.25pF GJM0225C1C3R7CB01#
3.8pF
±0.05pF GJM0225C1C3R8WB01#
±0.1pF GJM0225C1C2R0BB01#
±0.1pF GJM0225C1C3R8BB01#
±0.25pF GJM0225C1C2R0CB01#
±0.25pF GJM0225C1C3R8CB01#
±0.05pF GJM0225C1C2R1WB01#
±0.1pF GJM0225C1C2R1BB01#
±0.25pF GJM0225C1C2R1CB01#
Capacitor Array
GNM Series
±0.1pF GJM0225C1CR50BB01#
±0.05pF GJM0225C1C2R3WB01#
Low ESL
LLp Series
±0.1pF GJM0225C1CR20BB01#
±0.25pF GJM0225C1C2R2CB01#
High-Q Type
GJM Series
C0G
Tol.
Tol.
High Frequency
GQM Series
0.22mm 16Vdc
Cap.
Cap.
Monolithic Microchip
GMA Series
Rated
TC
Voltage Code
Rated
TC
Voltage Code
For Bonding
GMD Series
T
max.
T
max.
Ultracompact
Part Number List
3.9pF
Product Information
c 0.4×0.2mm
HiQ
For General Purpose
GRM Series
GJM Series Temperature Compensating Type
Oct.1,2012
±0.05pF GJM0225C1C3R9WB01#
±0.1pF GJM0225C1C3R9BB01#
±0.25pF GJM0225C1C3R9CB01#
Part number # indicates the package specification code.
83
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 0.4×0.2mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.22mm 16Vdc
C0G
Cap.
4.0pF
Tol.
Part Number
±0.05pF GJM0225C1C4R0WB01#
T
max.
Rated
TC
Voltage Code
0.22mm 16Vdc
C0G
Cap.
5.6pF
±0.1pF GJM0225C1C4R0BB01#
4.2pF
±0.05pF GJM0225C1C4R1WB01#
±0.5pF GJM0225C1C5R6DB01#
5.7pF
±0.25pF GJM0225C1C4R1CB01#
±0.25pF GJM0225C1C5R7CB01#
±0.05pF GJM0225C1C4R2WB01#
±0.5pF GJM0225C1C5R7DB01#
5.8pF
Capacitor Array
GNM Series
Low ESL
LLp Series
4.6pF
±0.25pF GJM0225C1C4R2CB01#
±0.1pF GJM0225C1C5R8BB01#
±0.25pF GJM0225C1C5R8CB01#
±0.5pF GJM0225C1C5R8DB01#
5.9pF
±0.1pF GJM0225C1C5R9BB01#
±0.1pF GJM0225C1C4R4BB01#
±0.25pF GJM0225C1C5R9CB01#
±0.25pF GJM0225C1C4R4CB01#
±0.5pF GJM0225C1C5R9DB01#
±0.05pF GJM0225C1C4R5WB01#
6.0pF
±0.1pF GJM0225C1C4R5BB01#
±0.1pF GJM0225C1C6R0BB01#
±0.25pF GJM0225C1C6R0CB01#
±0.05pF GJM0225C1C4R6WB01#
±0.5pF GJM0225C1C6R0DB01#
6.1pF
±0.1pF GJM0225C1C6R1BB01#
±0.05pF GJM0225C1C4R7WB01#
±0.25pF GJM0225C1C6R1CB01#
High-Q Type
GJM Series
±0.5pF GJM0225C1C6R1DB01#
6.2pF
±0.1pF GJM0225C1C6R2BB01#
±0.1pF GJM0225C1C4R8BB01#
±0.25pF GJM0225C1C6R2CB01#
±0.05pF GJM0225C1C4R9WB01#
±0.5pF GJM0225C1C6R2DB01#
6.3pF
High Frequency
GQM Series
±0.1pF GJM0225C1C4R9BB01#
±0.1pF GJM0225C1C6R3BB01#
±0.25pF GJM0225C1C6R3CB01#
±0.05pF GJM0225C1C5R0WB01#
±0.5pF GJM0225C1C6R3DB01#
6.4pF
±0.1pF GJM0225C1C6R4BB01#
±0.05pF GJM0225C1C5R1WB01#
±0.25pF GJM0225C1C6R4CB01#
Monolithic Microchip
GMA Series
±0.1pF GJM0225C1C5R1BB01#
±0.5pF GJM0225C1C6R4DB01#
6.5pF
±0.1pF GJM0225C1C6R5BB01#
±0.05pF GJM0225C1C5R2WB01#
±0.25pF GJM0225C1C6R5CB01#
±0.25pF GJM0225C1C5R2CB01#
±0.5pF GJM0225C1C6R5DB01#
6.6pF
±0.5pF GJM0225C1C5R2DB01#
±0.1pF GJM0225C1C6R6BB01#
±0.25pF GJM0225C1C6R6CB01#
For Bonding
GMD Series
±0.1pF GJM0225C1C5R3BB01#
±0.5pF GJM0225C1C6R6DB01#
6.7pF
±0.5pF GJM0225C1C5R3DB01#
±0.1pF GJM0225C1C6R7BB01#
±0.25pF GJM0225C1C6R7CB01#
±0.1pF GJM0225C1C5R4BB01#
±0.5pF GJM0225C1C6R7DB01#
6.8pF
±0.05pF GJM0225C1C6R8WB01#
Product Information
±0.5pF GJM0225C1C5R4DB01#
±0.1pF GJM0225C1C6R8BB01#
±0.05pF GJM0225C1C5R5WB01#
±0.25pF GJM0225C1C6R8CB01#
±0.1pF GJM0225C1C5R5BB01#
±0.25pF GJM0225C1C5R5CB01#
±0.5pF GJM0225C1C5R5DB01#
5.6pF
±0.05pF GJM0225C1C6R7WB01#
±0.05pF GJM0225C1C5R4WB01#
±0.25pF GJM0225C1C5R4CB01#
5.5pF
±0.05pF GJM0225C1C6R6WB01#
±0.05pF GJM0225C1C5R3WB01#
±0.25pF GJM0225C1C5R3CB01#
5.4pF
±0.05pF GJM0225C1C6R5WB01#
±0.5pF GJM0225C1C5R1DB01#
±0.1pF GJM0225C1C5R2BB01#
5.3pF
±0.05pF GJM0225C1C6R4WB01#
±0.25pF GJM0225C1C5R0CB01#
±0.25pF GJM0225C1C5R1CB01#
5.2pF
±0.05pF GJM0225C1C6R3WB01#
±0.25pF GJM0225C1C4R9CB01#
±0.1pF GJM0225C1C5R0BB01#
5.1pF
±0.05pF GJM0225C1C6R2WB01#
±0.05pF GJM0225C1C4R8WB01#
±0.25pF GJM0225C1C4R8CB01#
5.0pF
±0.05pF GJM0225C1C6R1WB01#
±0.25pF GJM0225C1C4R6CB01#
±0.25pF GJM0225C1C4R7CB01#
4.9pF
±0.05pF GJM0225C1C6R0WB01#
±0.25pF GJM0225C1C4R5CB01#
±0.1pF GJM0225C1C4R7BB01#
4.8pF
±0.05pF GJM0225C1C5R9WB01#
±0.05pF GJM0225C1C4R4WB01#
±0.1pF GJM0225C1C4R6BB01#
4.7pF
±0.05pF GJM0225C1C5R8WB01#
±0.05pF GJM0225C1C4R3WB01#
±0.1pF GJM0225C1C4R3BB01#
4.5pF
±0.05pF GJM0225C1C5R7WB01#
±0.1pF GJM0225C1C5R7BB01#
±0.25pF GJM0225C1C4R3CB01#
4.4pF
±0.1pF GJM0225C1C5R6BB01#
±0.1pF GJM0225C1C4R1BB01#
±0.1pF GJM0225C1C4R2BB01#
4.3pF
Part Number
±0.25pF GJM0225C1C5R6CB01#
±0.25pF GJM0225C1C4R0CB01#
4.1pF
Tol.
±0.05pF GJM0225C1C5R6WB01#
±0.5pF GJM0225C1C6R8DB01#
6.9pF
±0.05pF GJM0225C1C6R9WB01#
±0.1pF GJM0225C1C6R9BB01#
±0.25pF GJM0225C1C6R9CB01#
Part number # indicates the package specification code.
84
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 0.4×0.2mm)
0.22mm 16Vdc
C0G
8.3pF
7.1pF
±0.1pF GJM0225C1C8R4BB01#
±0.05pF GJM0225C1C7R1WB01#
±0.25pF GJM0225C1C8R4CB01#
±0.5pF GJM0225C1C8R4DB01#
8.5pF
±0.5pF GJM0225C1C7R1DB01#
±0.1pF GJM0225C1C8R5BB01#
±0.25pF GJM0225C1C8R5CB01#
±0.1pF GJM0225C1C7R2BB01#
±0.5pF GJM0225C1C8R5DB01#
8.6pF
±0.5pF GJM0225C1C7R2DB01#
±0.1pF GJM0225C1C8R6BB01#
±0.25pF GJM0225C1C8R6CB01#
±0.1pF GJM0225C1C7R3BB01#
±0.5pF GJM0225C1C8R6DB01#
8.7pF
±0.5pF GJM0225C1C7R3DB01#
±0.1pF GJM0225C1C8R7BB01#
±0.25pF GJM0225C1C8R7CB01#
±0.1pF GJM0225C1C7R4BB01#
±0.5pF GJM0225C1C8R7DB01#
8.8pF
±0.1pF GJM0225C1C8R8BB01#
±0.05pF GJM0225C1C7R5WB01#
±0.25pF GJM0225C1C8R8CB01#
±0.25pF GJM0225C1C7R5CB01#
±0.5pF GJM0225C1C8R8DB01#
8.9pF
±0.5pF GJM0225C1C7R5DB01#
±0.1pF GJM0225C1C8R9BB01#
±0.25pF GJM0225C1C8R9CB01#
±0.1pF GJM0225C1C7R6BB01#
±0.5pF GJM0225C1C8R9DB01#
9.0pF
±0.5pF GJM0225C1C7R6DB01#
±0.1pF GJM0225C1C9R0BB01#
±0.25pF GJM0225C1C9R0CB01#
±0.1pF GJM0225C1C7R7BB01#
±0.5pF GJM0225C1C9R0DB01#
9.1pF
±0.1pF GJM0225C1C9R1BB01#
±0.05pF GJM0225C1C7R8WB01#
±0.25pF GJM0225C1C9R1CB01#
±0.1pF GJM0225C1C7R8BB01#
±0.5pF GJM0225C1C9R1DB01#
9.2pF
±0.1pF GJM0225C1C9R2BB01#
±0.05pF GJM0225C1C7R9WB01#
±0.25pF GJM0225C1C9R2CB01#
±0.25pF GJM0225C1C7R9CB01#
±0.5pF GJM0225C1C9R2DB01#
9.3pF
±0.5pF GJM0225C1C7R9DB01#
±0.1pF GJM0225C1C9R3BB01#
±0.25pF GJM0225C1C9R3CB01#
±0.1pF GJM0225C1C8R0BB01#
±0.5pF GJM0225C1C9R3DB01#
9.4pF
±0.05pF GJM0225C1C9R4WB01#
±0.5pF GJM0225C1C8R0DB01#
±0.1pF GJM0225C1C9R4BB01#
±0.05pF GJM0225C1C8R1WB01#
±0.25pF GJM0225C1C9R4CB01#
±0.1pF GJM0225C1C8R1BB01#
±0.5pF GJM0225C1C9R4DB01#
±0.25pF GJM0225C1C8R1CB01#
9.5pF
±0.05pF GJM0225C1C9R5WB01#
±0.5pF GJM0225C1C8R1DB01#
±0.1pF GJM0225C1C9R5BB01#
±0.05pF GJM0225C1C8R2WB01#
±0.25pF GJM0225C1C9R5CB01#
±0.1pF GJM0225C1C8R2BB01#
±0.25pF GJM0225C1C8R2CB01#
±0.5pF GJM0225C1C8R2DB01#
8.3pF
±0.05pF GJM0225C1C9R3WB01#
±0.05pF GJM0225C1C8R0WB01#
±0.25pF GJM0225C1C8R0CB01#
8.2pF
±0.05pF GJM0225C1C9R2WB01#
±0.5pF GJM0225C1C7R8DB01#
±0.1pF GJM0225C1C7R9BB01#
8.1pF
±0.05pF GJM0225C1C9R1WB01#
±0.5pF GJM0225C1C7R7DB01#
±0.25pF GJM0225C1C7R8CB01#
8.0pF
±0.05pF GJM0225C1C9R0WB01#
±0.05pF GJM0225C1C7R7WB01#
±0.25pF GJM0225C1C7R7CB01#
7.9pF
±0.05pF GJM0225C1C8R9WB01#
±0.05pF GJM0225C1C7R6WB01#
±0.25pF GJM0225C1C7R6CB01#
7.8pF
±0.05pF GJM0225C1C8R8WB01#
±0.5pF GJM0225C1C7R4DB01#
±0.1pF GJM0225C1C7R5BB01#
7.7pF
±0.05pF GJM0225C1C8R7WB01#
±0.05pF GJM0225C1C7R4WB01#
±0.25pF GJM0225C1C7R4CB01#
7.6pF
±0.05pF GJM0225C1C8R6WB01#
±0.05pF GJM0225C1C7R3WB01#
±0.25pF GJM0225C1C7R3CB01#
7.5pF
±0.05pF GJM0225C1C8R5WB01#
±0.05pF GJM0225C1C7R2WB01#
±0.25pF GJM0225C1C7R2CB01#
7.4pF
±0.05pF GJM0225C1C8R4WB01#
±0.5pF GJM0225C1C7R0DB01#
±0.25pF GJM0225C1C7R1CB01#
7.3pF
±0.1pF GJM0225C1C8R3BB01#
±0.5pF GJM0225C1C8R3DB01#
8.4pF
±0.1pF GJM0225C1C7R1BB01#
7.2pF
Part Number
±0.25pF GJM0225C1C8R3CB01#
±0.1pF GJM0225C1C7R0BB01#
±0.25pF GJM0225C1C7R0CB01#
Tol.
±0.05pF GJM0225C1C8R3WB01#
For General Purpose
GRM Series
±0.05pF GJM0225C1C7R0WB01#
Cap.
Capacitor Array
GNM Series
±0.5pF GJM0225C1C6R9DB01#
7.0pF
Rated
TC
Voltage Code
Low ESL
LLp Series
6.9pF
T
max.
High-Q Type
GJM Series
Part Number
High Frequency
GQM Series
C0G
Tol.
Monolithic Microchip
GMA Series
0.22mm 16Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
±0.5pF GJM0225C1C9R5DB01#
9.6pF
±0.05pF GJM0225C1C9R6WB01#
±0.1pF GJM0225C1C9R6BB01#
±0.25pF GJM0225C1C9R6CB01#
Part number # indicates the package specification code.
85
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 0.4×0.2mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.22mm 16Vdc
C0G
Cap.
Tol.
Part Number
9.6pF
±0.5pF GJM0225C1C9R6DB01#
9.7pF
±0.05pF GJM0225C1C9R7WB01#
T
max.
Rated
TC
Voltage Code
0.22mm 16Vdc
CK
Capacitor Array
GNM Series
Low ESL
LLp Series
CK
1.7pF
±0.25pF GJM0224C1C1R7CB01#
1.8pF
±0.05pF GJM0224C1C1R8WB01#
±0.1pF GJM0224C1C1R8BB01#
±0.25pF GJM0224C1C1R8CB01#
1.9pF
±0.05pF GJM0224C1C1R9WB01#
±0.05pF GJM0225C1C9R8WB01#
±0.1pF GJM0224C1C1R9BB01#
±0.1pF GJM0225C1C9R8BB01#
±0.25pF GJM0224C1C1R9CB01#
2.0pF
±0.05pF GJM0224C1C2R0WB01#
±0.5pF GJM0225C1C9R8DB01#
±0.1pF GJM0224C1C2R0BB01#
±0.05pF GJM0225C1C9R9WB01#
±0.25pF GJM0224C1C2R0CB01#
±0.1pF GJM0225C1C9R9BB01#
10pF
Part Number
±0.25pF GJM0225C1C9R7CB01#
±0.25pF GJM0225C1C9R8CB01#
9.9pF
Tol.
±0.1pF GJM0225C1C9R7BB01#
±0.5pF GJM0225C1C9R7DB01#
9.8pF
Cap.
CJ
2.1pF
±0.05pF GJM0223C1C2R1WB01#
±0.25pF GJM0225C1C9R9CB01#
±0.1pF GJM0223C1C2R1BB01#
±0.5pF GJM0225C1C9R9DB01#
±0.25pF GJM0223C1C2R1CB01#
±2%
GJM0225C1C100GB01#
±5%
GJM0225C1C100JB01#
2.2pF
±0.05pF GJM0223C1C2R2WB01#
±0.1pF GJM0223C1C2R2BB01#
0.2pF
±0.05pF GJM0224C1CR20WB01#
0.3pF
±0.05pF GJM0224C1CR30WB01#
±0.1pF GJM0223C1C2R3BB01#
±0.1pF GJM0224C1CR30BB01#
±0.25pF GJM0223C1C2R3CB01#
±0.1pF GJM0224C1CR20BB01#
0.4pF
±0.05pF GJM0224C1CR40WB01#
±0.25pF GJM0223C1C2R2CB01#
2.3pF
2.4pF
±0.1pF GJM0224C1CR40BB01#
0.5pF
High-Q Type
GJM Series
0.6pF
±0.05pF GJM0223C1C2R4WB01#
±0.1pF GJM0223C1C2R4BB01#
±0.05pF GJM0224C1CR50WB01#
±0.1pF GJM0224C1CR50BB01#
±0.05pF GJM0223C1C2R3WB01#
±0.25pF GJM0223C1C2R4CB01#
2.5pF
±0.05pF GJM0223C1C2R5WB01#
±0.05pF GJM0224C1CR60WB01#
±0.1pF GJM0223C1C2R5BB01#
±0.1pF GJM0224C1CR60BB01#
±0.25pF GJM0223C1C2R5CB01#
High Frequency
GQM Series
0.7pF
±0.05pF GJM0224C1CR70WB01#
±0.1pF GJM0224C1CR70BB01#
±0.1pF GJM0223C1C2R6BB01#
0.8pF
±0.05pF GJM0224C1CR80WB01#
±0.25pF GJM0223C1C2R6CB01#
0.9pF
±0.05pF GJM0224C1CR90WB01#
±0.1pF GJM0223C1C2R7BB01#
±0.1pF GJM0224C1CR90BB01#
±0.25pF GJM0223C1C2R7CB01#
±0.1pF GJM0224C1CR80BB01#
1.0pF
Monolithic Microchip
GMA Series
1.1pF
1.2pF
1.3pF
±0.05pF GJM0224C1C1R0WB01#
2.6pF
2.7pF
2.8pF
For Bonding
GMD Series
Product Information
1.6pF
1.7pF
±0.05pF GJM0223C1C2R8WB01#
±0.1pF GJM0223C1C2R8BB01#
±0.25pF GJM0224C1C1R0CB01#
±0.25pF GJM0223C1C2R8CB01#
±0.05pF GJM0224C1C1R1WB01#
2.9pF
±0.05pF GJM0223C1C2R9WB01#
±0.1pF GJM0224C1C1R1BB01#
±0.1pF GJM0223C1C2R9BB01#
±0.25pF GJM0224C1C1R1CB01#
±0.25pF GJM0223C1C2R9CB01#
±0.05pF GJM0224C1C1R2WB01#
3.0pF
±0.05pF GJM0223C1C3R0WB01#
±0.1pF GJM0224C1C1R2BB01#
±0.1pF GJM0223C1C3R0BB01#
±0.25pF GJM0224C1C1R2CB01#
±0.25pF GJM0223C1C3R0CB01#
±0.05pF GJM0224C1C1R3WB01#
3.1pF
±0.05pF GJM0224C1C1R4WB01#
±0.05pF GJM0223C1C3R1WB01#
±0.1pF GJM0223C1C3R1BB01#
±0.25pF GJM0224C1C1R3CB01#
1.5pF
±0.05pF GJM0223C1C2R7WB01#
±0.1pF GJM0224C1C1R0BB01#
±0.1pF GJM0224C1C1R3BB01#
1.4pF
±0.05pF GJM0223C1C2R6WB01#
±0.25pF GJM0223C1C3R1CB01#
3.2pF
±0.05pF GJM0223C1C3R2WB01#
±0.1pF GJM0224C1C1R4BB01#
±0.1pF GJM0223C1C3R2BB01#
±0.25pF GJM0224C1C1R4CB01#
±0.25pF GJM0223C1C3R2CB01#
±0.05pF GJM0224C1C1R5WB01#
3.3pF
±0.05pF GJM0223C1C3R3WB01#
±0.1pF GJM0224C1C1R5BB01#
±0.1pF GJM0223C1C3R3BB01#
±0.25pF GJM0224C1C1R5CB01#
±0.25pF GJM0223C1C3R3CB01#
±0.05pF GJM0224C1C1R6WB01#
3.4pF
±0.05pF GJM0223C1C3R4WB01#
±0.1pF GJM0224C1C1R6BB01#
±0.1pF GJM0223C1C3R4BB01#
±0.25pF GJM0224C1C1R6CB01#
±0.25pF GJM0223C1C3R4CB01#
±0.05pF GJM0224C1C1R7WB01#
±0.1pF GJM0224C1C1R7BB01#
3.5pF
±0.05pF GJM0223C1C3R5WB01#
±0.1pF GJM0223C1C3R5BB01#
Part number # indicates the package specification code.
86
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 0.4×0.2mm)
Part Number
3.5pF
±0.25pF GJM0223C1C3R5CB01#
3.6pF
±0.05pF GJM0223C1C3R6WB01#
±0.1pF GJM0222C1C5R3BB01#
±0.1pF GJM0223C1C3R6BB01#
±0.25pF GJM0222C1C5R3CB01#
0.22mm 16Vdc
CH
5.3pF
±0.25pF GJM0223C1C3R6CB01#
3.7pF
3.8pF
±0.05pF GJM0223C1C3R7WB01#
3.9pF
±0.5pF GJM0222C1C5R3DB01#
5.4pF
±0.1pF GJM0222C1C5R4BB01#
±0.25pF GJM0222C1C5R4CB01#
±0.05pF GJM0223C1C3R8WB01#
±0.5pF GJM0222C1C5R4DB01#
5.5pF
4.2pF
±0.1pF GJM0222C1C5R5BB01#
±0.05pF GJM0223C1C3R9WB01#
±0.25pF GJM0222C1C5R5CB01#
±0.5pF GJM0222C1C5R5DB01#
5.6pF
±0.1pF GJM0222C1C5R6BB01#
±0.1pF GJM0222C1C4R0BB01#
±0.25pF GJM0222C1C5R6CB01#
±0.25pF GJM0222C1C4R0CB01#
±0.5pF GJM0222C1C5R6DB01#
±0.05pF GJM0222C1C4R1WB01#
5.7pF
±0.1pF GJM0222C1C5R7BB01#
±0.25pF GJM0222C1C4R1CB01#
±0.25pF GJM0222C1C5R7CB01#
±0.05pF GJM0222C1C4R2WB01#
±0.5pF GJM0222C1C5R7DB01#
5.8pF
±0.25pF GJM0222C1C4R2CB01#
±0.1pF GJM0222C1C5R8BB01#
±0.25pF GJM0222C1C5R8CB01#
±0.5pF GJM0222C1C5R8DB01#
5.9pF
±0.1pF GJM0222C1C5R9BB01#
±0.1pF GJM0222C1C4R4BB01#
±0.25pF GJM0222C1C5R9CB01#
±0.05pF GJM0222C1C4R5WB01#
±0.5pF GJM0222C1C5R9DB01#
6.0pF
±0.1pF GJM0222C1C4R5BB01#
±0.1pF GJM0222C1C6R0BB01#
±0.25pF GJM0222C1C6R0CB01#
±0.05pF GJM0222C1C4R6WB01#
±0.5pF GJM0222C1C6R0DB01#
6.1pF
±0.25pF GJM0222C1C4R6CB01#
±0.1pF GJM0222C1C6R1BB01#
±0.25pF GJM0222C1C6R1CB01#
±0.1pF GJM0222C1C4R7BB01#
±0.5pF GJM0222C1C6R1DB01#
6.2pF
5.0pF
±0.1pF GJM0222C1C6R2BB01#
±0.1pF GJM0222C1C4R8BB01#
±0.25pF GJM0222C1C6R2CB01#
±0.05pF GJM0222C1C4R9WB01#
±0.5pF GJM0222C1C6R2DB01#
6.3pF
±0.1pF GJM0222C1C6R3BB01#
±0.25pF GJM0222C1C4R9CB01#
±0.25pF GJM0222C1C6R3CB01#
±0.05pF GJM0222C1C5R0WB01#
±0.5pF GJM0222C1C6R3DB01#
6.4pF
±0.05pF GJM0222C1C6R4WB01#
±0.25pF GJM0222C1C5R0CB01#
±0.1pF GJM0222C1C6R4BB01#
±0.05pF GJM0222C1C5R1WB01#
±0.25pF GJM0222C1C6R4CB01#
±0.1pF GJM0222C1C5R1BB01#
±0.25pF GJM0222C1C5R1CB01#
5.2pF
±0.05pF GJM0222C1C6R3WB01#
±0.1pF GJM0222C1C4R9BB01#
±0.1pF GJM0222C1C5R0BB01#
5.1pF
±0.05pF GJM0222C1C6R2WB01#
±0.05pF GJM0222C1C4R8WB01#
±0.25pF GJM0222C1C4R8CB01#
4.9pF
±0.05pF GJM0222C1C6R1WB01#
±0.05pF GJM0222C1C4R7WB01#
±0.25pF GJM0222C1C4R7CB01#
4.8pF
±0.05pF GJM0222C1C6R0WB01#
±0.25pF GJM0222C1C4R5CB01#
±0.1pF GJM0222C1C4R6BB01#
4.7pF
±0.05pF GJM0222C1C5R9WB01#
±0.05pF GJM0222C1C4R4WB01#
±0.25pF GJM0222C1C4R4CB01#
4.6pF
±0.05pF GJM0222C1C5R8WB01#
±0.05pF GJM0222C1C4R3WB01#
±0.1pF GJM0222C1C4R3BB01#
4.5pF
±0.05pF GJM0222C1C5R7WB01#
±0.1pF GJM0222C1C4R1BB01#
±0.25pF GJM0222C1C4R3CB01#
4.4pF
±0.05pF GJM0222C1C5R6WB01#
±0.05pF GJM0222C1C4R0WB01#
±0.1pF GJM0222C1C4R2BB01#
4.3pF
±0.05pF GJM0222C1C5R5WB01#
±0.25pF GJM0223C1C3R8CB01#
±0.25pF GJM0223C1C3R9CB01#
4.1pF
±0.05pF GJM0222C1C5R4WB01#
±0.1pF GJM0223C1C3R7BB01#
±0.1pF GJM0223C1C3R9BB01#
4.0pF
±0.05pF GJM0222C1C5R3WB01#
±0.25pF GJM0223C1C3R7CB01#
±0.1pF GJM0223C1C3R8BB01#
CH
Tol.
±0.5pF GJM0222C1C6R4DB01#
6.5pF
±0.05pF GJM0222C1C6R5WB01#
±0.5pF GJM0222C1C5R1DB01#
±0.1pF GJM0222C1C6R5BB01#
±0.05pF GJM0222C1C5R2WB01#
±0.25pF GJM0222C1C6R5CB01#
±0.5pF GJM0222C1C6R5DB01#
±0.1pF GJM0222C1C5R2BB01#
±0.25pF GJM0222C1C5R2CB01#
±0.5pF GJM0222C1C5R2DB01#
For General Purpose
GRM Series
Cap.
Capacitor Array
GNM Series
Rated
TC
Voltage Code
Low ESL
LLp Series
T
max.
High-Q Type
GJM Series
Part Number
High Frequency
GQM Series
CJ
Tol.
Monolithic Microchip
GMA Series
0.22mm 16Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
6.6pF
±0.05pF GJM0222C1C6R6WB01#
±0.1pF GJM0222C1C6R6BB01#
Part number # indicates the package specification code.
87
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 0.4×0.2mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.22mm 16Vdc
CH
Cap.
6.6pF
6.7pF
Tol.
Part Number
±0.25pF GJM0222C1C6R6CB01#
T
max.
Rated
TC
Voltage Code
0.22mm 16Vdc
CH
Cap.
8.0pF
±0.1pF GJM0222C1C8R0BB01#
±0.25pF GJM0222C1C8R0CB01#
±0.5pF GJM0222C1C8R0DB01#
8.1pF
±0.5pF GJM0222C1C6R7DB01#
±0.1pF GJM0222C1C8R1BB01#
±0.25pF GJM0222C1C8R1CB01#
±0.1pF GJM0222C1C6R8BB01#
±0.5pF GJM0222C1C8R1DB01#
Capacitor Array
GNM Series
8.2pF
±0.1pF GJM0222C1C8R2BB01#
±0.05pF GJM0222C1C6R9WB01#
±0.25pF GJM0222C1C8R2CB01#
±0.25pF GJM0222C1C6R9CB01#
±0.5pF GJM0222C1C8R2DB01#
8.3pF
Low ESL
LLp Series
±0.5pF GJM0222C1C6R9DB01#
±0.1pF GJM0222C1C8R3BB01#
±0.25pF GJM0222C1C8R3CB01#
±0.1pF GJM0222C1C7R0BB01#
±0.5pF GJM0222C1C8R3DB01#
8.4pF
±0.1pF GJM0222C1C8R4BB01#
±0.05pF GJM0222C1C7R1WB01#
±0.25pF GJM0222C1C8R4CB01#
±0.1pF GJM0222C1C7R1BB01#
±0.5pF GJM0222C1C8R4DB01#
8.5pF
High-Q Type
GJM Series
±0.5pF GJM0222C1C7R1DB01#
±0.1pF GJM0222C1C8R5BB01#
±0.25pF GJM0222C1C8R5CB01#
±0.1pF GJM0222C1C7R2BB01#
±0.5pF GJM0222C1C8R5DB01#
8.6pF
±0.1pF GJM0222C1C8R6BB01#
±0.05pF GJM0222C1C7R3WB01#
±0.25pF GJM0222C1C8R6CB01#
High Frequency
GQM Series
±0.25pF GJM0222C1C7R3CB01#
±0.5pF GJM0222C1C8R6DB01#
8.7pF
±0.5pF GJM0222C1C7R3DB01#
±0.1pF GJM0222C1C8R7BB01#
±0.25pF GJM0222C1C8R7CB01#
±0.1pF GJM0222C1C7R4BB01#
±0.5pF GJM0222C1C8R7DB01#
8.8pF
Monolithic Microchip
GMA Series
±0.5pF GJM0222C1C7R4DB01#
±0.1pF GJM0222C1C8R8BB01#
±0.25pF GJM0222C1C8R8CB01#
±0.1pF GJM0222C1C7R5BB01#
±0.5pF GJM0222C1C8R8DB01#
8.9pF
±0.5pF GJM0222C1C7R5DB01#
±0.1pF GJM0222C1C8R9BB01#
±0.25pF GJM0222C1C8R9CB01#
±0.1pF GJM0222C1C7R6BB01#
±0.5pF GJM0222C1C8R9DB01#
9.0pF
±0.05pF GJM0222C1C9R0WB01#
For Bonding
GMD Series
±0.5pF GJM0222C1C7R6DB01#
±0.1pF GJM0222C1C9R0BB01#
±0.05pF GJM0222C1C7R7WB01#
±0.25pF GJM0222C1C9R0CB01#
±0.1pF GJM0222C1C7R7BB01#
±0.25pF GJM0222C1C7R7CB01#
±0.5pF GJM0222C1C9R0DB01#
9.1pF
±0.05pF GJM0222C1C9R1WB01#
±0.5pF GJM0222C1C7R7DB01#
±0.1pF GJM0222C1C9R1BB01#
±0.05pF GJM0222C1C7R8WB01#
±0.25pF GJM0222C1C9R1CB01#
±0.1pF GJM0222C1C7R8BB01#
Product Information
±0.25pF GJM0222C1C7R8CB01#
7.9pF
±0.05pF GJM0222C1C8R9WB01#
±0.05pF GJM0222C1C7R6WB01#
±0.25pF GJM0222C1C7R6CB01#
7.8pF
±0.05pF GJM0222C1C8R8WB01#
±0.05pF GJM0222C1C7R5WB01#
±0.25pF GJM0222C1C7R5CB01#
7.7pF
±0.05pF GJM0222C1C8R7WB01#
±0.05pF GJM0222C1C7R4WB01#
±0.25pF GJM0222C1C7R4CB01#
7.6pF
±0.05pF GJM0222C1C8R6WB01#
±0.5pF GJM0222C1C7R2DB01#
±0.1pF GJM0222C1C7R3BB01#
7.5pF
±0.05pF GJM0222C1C8R5WB01#
±0.05pF GJM0222C1C7R2WB01#
±0.25pF GJM0222C1C7R2CB01#
7.4pF
±0.05pF GJM0222C1C8R4WB01#
±0.5pF GJM0222C1C7R0DB01#
±0.25pF GJM0222C1C7R1CB01#
7.3pF
±0.05pF GJM0222C1C8R3WB01#
±0.05pF GJM0222C1C7R0WB01#
±0.25pF GJM0222C1C7R0CB01#
7.2pF
±0.05pF GJM0222C1C8R2WB01#
±0.5pF GJM0222C1C6R8DB01#
±0.1pF GJM0222C1C6R9BB01#
7.1pF
±0.05pF GJM0222C1C8R1WB01#
±0.05pF GJM0222C1C6R8WB01#
±0.25pF GJM0222C1C6R8CB01#
7.0pF
±0.05pF GJM0222C1C8R0WB01#
±0.05pF GJM0222C1C6R7WB01#
±0.1pF GJM0222C1C6R7BB01#
6.9pF
Part Number
±0.5pF GJM0222C1C6R6DB01#
±0.25pF GJM0222C1C6R7CB01#
6.8pF
Tol.
±0.5pF GJM0222C1C9R1DB01#
9.2pF
±0.05pF GJM0222C1C9R2WB01#
±0.5pF GJM0222C1C7R8DB01#
±0.1pF GJM0222C1C9R2BB01#
±0.05pF GJM0222C1C7R9WB01#
±0.25pF GJM0222C1C9R2CB01#
±0.5pF GJM0222C1C9R2DB01#
±0.1pF GJM0222C1C7R9BB01#
±0.25pF GJM0222C1C7R9CB01#
±0.5pF GJM0222C1C7R9DB01#
9.3pF
±0.05pF GJM0222C1C9R3WB01#
±0.1pF GJM0222C1C9R3BB01#
Part number # indicates the package specification code.
88
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 0.4×0.2mm)
±0.05pF GJM0335C1E1R2WB01#
±0.1pF GJM0335C1E1R2BB01#
1.3pF
±0.5pF GJM0222C1C9R4DB01#
±0.1pF GJM0335C1E1R3BB01#
±0.25pF GJM0335C1E1R3CB01#
1.4pF
±0.1pF GJM0335C1E1R4BB01#
±0.5pF GJM0222C1C9R5DB01#
±0.25pF GJM0335C1E1R4CB01#
±0.05pF GJM0222C1C9R6WB01#
1.5pF
±0.1pF GJM0335C1E1R5BB01#
±0.25pF GJM0222C1C9R6CB01#
±0.25pF GJM0335C1E1R5CB01#
1.6pF
±0.1pF GJM0335C1E1R6BB01#
±0.1pF GJM0222C1C9R7BB01#
±0.25pF GJM0335C1E1R6CB01#
1.7pF
±0.1pF GJM0335C1E1R7BB01#
±0.05pF GJM0222C1C9R8WB01#
±0.25pF GJM0335C1E1R7CB01#
1.8pF
±0.05pF GJM0222C1C9R9WB01#
±0.25pF GJM0335C1E1R8CB01#
1.9pF
0.33mm 25Vdc
C0G
±0.05pF GJM0335C1E1R9WB01#
±0.1pF GJM0222C1C9R9BB01#
±0.1pF GJM0335C1E1R9BB01#
±0.25pF GJM0222C1C9R9CB01#
±0.25pF GJM0335C1E1R9CB01#
2.0pF
±0.05pF GJM0335C1E2R0WB01#
±2%
GJM0222C1C100GB01#
±0.1pF GJM0335C1E2R0BB01#
±5%
GJM0222C1C100JB01#
±0.25pF GJM0335C1E2R0CB01#
±0.05pF GJM0335C1E2R1WB01#
±0.1pF GJM0335C1E2R1BB01#
Ultracompact
Cap.
±0.05pF GJM0335C1E1R8WB01#
±0.1pF GJM0335C1E1R8BB01#
2.1pF
Rated
TC
Voltage Code
±0.05pF GJM0335C1E1R7WB01#
±0.5pF GJM0222C1C9R7DB01#
±0.5pF GJM0222C1C9R9DB01#
T
max.
±0.05pF GJM0335C1E1R6WB01#
±0.05pF GJM0222C1C9R7WB01#
±0.5pF GJM0222C1C9R8DB01#
c 0.6×0.3mm
±0.05pF GJM0335C1E1R5WB01#
±0.1pF GJM0222C1C9R6BB01#
±0.1pF GJM0222C1C9R8BB01#
10pF
±0.05pF GJM0335C1E1R4WB01#
±0.25pF GJM0222C1C9R5CB01#
±0.25pF GJM0222C1C9R8CB01#
9.9pF
±0.05pF GJM0335C1E1R3WB01#
±0.05pF GJM0222C1C9R5WB01#
±0.25pF GJM0222C1C9R7CB01#
9.8pF
±0.25pF GJM0335C1E1R1CB01#
1.2pF
±0.25pF GJM0335C1E1R2CB01#
±0.5pF GJM0222C1C9R6DB01#
9.7pF
1.1pF
±0.1pF GJM0222C1C9R4BB01#
±0.1pF GJM0222C1C9R5BB01#
9.6pF
Part Number
±0.05pF GJM0222C1C9R4WB01#
±0.25pF GJM0222C1C9R4CB01#
9.5pF
C0G
Tol.
For General Purpose
GRM Series
9.4pF
0.33mm 25Vdc
Cap.
Capacitor Array
GNM Series
±0.5pF GJM0222C1C9R3DB01#
Rated
TC
Voltage Code
Low ESL
LLp Series
±0.25pF GJM0222C1C9R3CB01#
T
max.
High-Q Type
GJM Series
9.3pF
Part Number
High Frequency
GQM Series
CH
Tol.
±0.25pF GJM0335C1E2R1CB01#
Tol.
Part Number
2.2pF
±0.05pF GJM0335C1E2R2WB01#
±0.1pF GJM0335C1E2R2BB01#
0.2pF
±0.05pF GJM0335C1ER20WB01#
0.3pF
±0.05pF GJM0335C1ER30WB01#
±0.1pF GJM0335C1E2R3BB01#
±0.1pF GJM0335C1ER30BB01#
±0.25pF GJM0335C1E2R3CB01#
±0.1pF GJM0335C1ER20BB01#
0.4pF
±0.05pF GJM0335C1ER40WB01#
±0.25pF GJM0335C1E2R2CB01#
2.3pF
2.4pF
±0.05pF GJM0335C1E2R3WB01#
±0.05pF GJM0335C1E2R4WB01#
±0.1pF GJM0335C1ER40BB01#
±0.1pF GJM0335C1E2R4BB01#
0.5pF
±0.05pF GJM0335C1ER50WB01#
±0.25pF GJM0335C1E2R4CB01#
0.6pF
±0.05pF GJM0335C1ER60WB01#
0.7pF
±0.05pF GJM0335C1ER70WB01#
±0.1pF GJM0335C1ER70BB01#
±0.1pF GJM0335C1E2R6BB01#
0.8pF
±0.05pF GJM0335C1ER80WB01#
±0.25pF GJM0335C1E2R6CB01#
±0.1pF GJM0335C1ER50BB01#
2.5pF
0.9pF
1.0pF
1.1pF
±0.05pF GJM0335C1E2R5WB01#
±0.1pF GJM0335C1E2R5BB01#
±0.1pF GJM0335C1ER60BB01#
±0.1pF GJM0335C1ER80BB01#
±0.25pF GJM0335C1E2R5CB01#
2.6pF
2.7pF
±0.05pF GJM0335C1E2R6WB01#
±0.05pF GJM0335C1E2R7WB01#
±0.05pF GJM0335C1ER90WB01#
±0.1pF GJM0335C1E2R7BB01#
±0.1pF GJM0335C1ER90BB01#
±0.25pF GJM0335C1E2R7CB01#
±0.05pF GJM0335C1E1R0WB01#
2.8pF
±0.05pF GJM0335C1E2R8WB01#
±0.1pF GJM0335C1E1R0BB01#
±0.1pF GJM0335C1E2R8BB01#
±0.25pF GJM0335C1E1R0CB01#
±0.25pF GJM0335C1E2R8CB01#
±0.05pF GJM0335C1E1R1WB01#
±0.1pF GJM0335C1E1R1BB01#
Monolithic Microchip
GMA Series
0.22mm 16Vdc
Cap.
2.9pF
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
±0.05pF GJM0335C1E2R9WB01#
±0.1pF GJM0335C1E2R9BB01#
Part number # indicates the package specification code.
89
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 0.6×0.3mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.33mm 25Vdc
C0G
Cap.
Tol.
Part Number
2.9pF
±0.25pF GJM0335C1E2R9CB01#
3.0pF
±0.05pF GJM0335C1E3R0WB01#
3.1pF
3.2pF
Capacitor Array
GNM Series
3.3pF
3.4pF
Rated
TC
Voltage Code
0.33mm 25Vdc
C0G
Cap.
±0.25pF GJM0335C1E4R7CB01#
4.8pF
±0.05pF GJM0335C1E4R8WB01#
±0.1pF GJM0335C1E4R8BB01#
±0.25pF GJM0335C1E3R0CB01#
±0.25pF GJM0335C1E4R8CB01#
±0.05pF GJM0335C1E3R1WB01#
4.9pF
±0.1pF GJM0335C1E3R1BB01#
±0.1pF GJM0335C1E4R9BB01#
±0.25pF GJM0335C1E4R9CB01#
±0.05pF GJM0335C1E3R2WB01#
5.0pF
±0.1pF GJM0335C1E5R0BB01#
±0.25pF GJM0335C1E3R2CB01#
±0.25pF GJM0335C1E5R0CB01#
±0.05pF GJM0335C1E3R3WB01#
5.1pF
±0.1pF GJM0335C1E5R1BB01#
±0.25pF GJM0335C1E3R3CB01#
±0.25pF GJM0335C1E5R1CB01#
±0.05pF GJM0335C1E3R4WB01#
±0.5pF GJM0335C1E5R1DB01#
5.2pF
Low ESL
LLp Series
High-Q Type
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
4.1pF
±0.1pF GJM0335C1E5R2BB01#
±0.05pF GJM0335C1E3R5WB01#
±0.25pF GJM0335C1E5R2CB01#
±0.5pF GJM0335C1E5R2DB01#
5.3pF
±0.1pF GJM0335C1E5R3BB01#
±0.1pF GJM0335C1E3R6BB01#
±0.25pF GJM0335C1E5R3CB01#
±0.05pF GJM0335C1E3R7WB01#
±0.5pF GJM0335C1E5R3DB01#
5.4pF
±0.1pF GJM0335C1E3R7BB01#
±0.1pF GJM0335C1E5R4BB01#
±0.25pF GJM0335C1E5R4CB01#
±0.05pF GJM0335C1E3R8WB01#
±0.5pF GJM0335C1E5R4DB01#
5.5pF
±0.1pF GJM0335C1E5R5BB01#
±0.05pF GJM0335C1E3R9WB01#
±0.25pF GJM0335C1E5R5CB01#
±0.5pF GJM0335C1E5R5DB01#
5.6pF
±0.1pF GJM0335C1E5R6BB01#
±0.1pF GJM0335C1E4R0BB01#
±0.25pF GJM0335C1E5R6CB01#
±0.05pF GJM0335C1E4R1WB01#
±0.5pF GJM0335C1E5R6DB01#
5.7pF
±0.1pF GJM0335C1E4R1BB01#
±0.1pF GJM0335C1E5R7BB01#
±0.25pF GJM0335C1E5R7CB01#
±0.05pF GJM0335C1E4R2WB01#
±0.5pF GJM0335C1E5R7DB01#
5.8pF
±0.05pF GJM0335C1E5R8WB01#
±0.25pF GJM0335C1E4R2CB01#
±0.1pF GJM0335C1E5R8BB01#
±0.05pF GJM0335C1E4R3WB01#
±0.25pF GJM0335C1E5R8CB01#
±0.1pF GJM0335C1E4R3BB01#
±0.5pF GJM0335C1E5R8DB01#
For Bonding
GMD Series
5.9pF
±0.05pF GJM0335C1E5R9WB01#
±0.05pF GJM0335C1E4R4WB01#
±0.1pF GJM0335C1E5R9BB01#
±0.1pF GJM0335C1E4R4BB01#
±0.25pF GJM0335C1E5R9CB01#
±0.05pF GJM0335C1E4R5WB01#
±0.5pF GJM0335C1E5R9DB01#
6.0pF
±0.05pF GJM0335C1E6R0WB01#
Product Information
±0.1pF GJM0335C1E4R5BB01#
±0.1pF GJM0335C1E6R0BB01#
±0.25pF GJM0335C1E4R5CB01#
±0.25pF GJM0335C1E6R0CB01#
±0.05pF GJM0335C1E4R6WB01#
±0.1pF GJM0335C1E4R6BB01#
4.7pF
±0.05pF GJM0335C1E5R7WB01#
±0.25pF GJM0335C1E4R1CB01#
±0.25pF GJM0335C1E4R4CB01#
4.6pF
±0.05pF GJM0335C1E5R6WB01#
±0.05pF GJM0335C1E4R0WB01#
±0.25pF GJM0335C1E4R3CB01#
4.5pF
±0.05pF GJM0335C1E5R5WB01#
±0.25pF GJM0335C1E3R8CB01#
±0.1pF GJM0335C1E4R2BB01#
4.4pF
±0.05pF GJM0335C1E5R4WB01#
±0.25pF GJM0335C1E3R7CB01#
±0.25pF GJM0335C1E4R0CB01#
4.3pF
±0.05pF GJM0335C1E5R3WB01#
±0.05pF GJM0335C1E3R6WB01#
±0.1pF GJM0335C1E3R9BB01#
4.2pF
±0.05pF GJM0335C1E5R2WB01#
±0.25pF GJM0335C1E3R4CB01#
±0.25pF GJM0335C1E3R9CB01#
4.0pF
±0.05pF GJM0335C1E5R1WB01#
±0.1pF GJM0335C1E3R3BB01#
±0.1pF GJM0335C1E3R8BB01#
3.9pF
±0.05pF GJM0335C1E5R0WB01#
±0.1pF GJM0335C1E3R2BB01#
±0.25pF GJM0335C1E3R6CB01#
3.8pF
±0.05pF GJM0335C1E4R9WB01#
±0.25pF GJM0335C1E3R1CB01#
±0.25pF GJM0335C1E3R5CB01#
3.7pF
Part Number
4.7pF
±0.1pF GJM0335C1E3R5BB01#
3.6pF
Tol.
±0.1pF GJM0335C1E3R0BB01#
±0.1pF GJM0335C1E3R4BB01#
3.5pF
T
max.
±0.5pF GJM0335C1E6R0DB01#
6.1pF
±0.05pF GJM0335C1E6R1WB01#
±0.25pF GJM0335C1E4R6CB01#
±0.1pF GJM0335C1E6R1BB01#
±0.05pF GJM0335C1E4R7WB01#
±0.25pF GJM0335C1E6R1CB01#
±0.1pF GJM0335C1E4R7BB01#
±0.5pF GJM0335C1E6R1DB01#
Part number # indicates the package specification code.
90
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 0.6×0.3mm)
C0H
6.3pF
±0.25pF GJM0336C1E7R5CB01#
7.6pF
±0.05pF GJM0336C1E7R6WB01#
±0.5pF GJM0336C1E7R5DB01#
±0.5pF GJM0335C1E6R2DB01#
±0.1pF GJM0336C1E7R6BB01#
±0.05pF GJM0335C1E6R3WB01#
±0.25pF GJM0336C1E7R6CB01#
±0.1pF GJM0335C1E6R3BB01#
±0.25pF GJM0335C1E6R3CB01#
6.4pF
±0.5pF GJM0336C1E7R6DB01#
7.7pF
±0.5pF GJM0335C1E6R3DB01#
±0.1pF GJM0336C1E7R7BB01#
±0.25pF GJM0336C1E7R7CB01#
±0.1pF GJM0335C1E6R4BB01#
±0.5pF GJM0336C1E7R7DB01#
7.8pF
±0.1pF GJM0336C1E7R8BB01#
±0.05pF GJM0335C1E6R5WB01#
±0.25pF GJM0336C1E7R8CB01#
±0.1pF GJM0335C1E6R5BB01#
±0.5pF GJM0336C1E7R8DB01#
7.9pF
±0.1pF GJM0336C1E7R9BB01#
±0.05pF GJM0335C1E6R6WB01#
±0.25pF GJM0336C1E7R9CB01#
±0.25pF GJM0335C1E6R6CB01#
±0.5pF GJM0336C1E7R9DB01#
8.0pF
±0.5pF GJM0335C1E6R6DB01#
±0.1pF GJM0336C1E8R0BB01#
±0.25pF GJM0336C1E8R0CB01#
±0.1pF GJM0335C1E6R7BB01#
6.9pF
±0.5pF GJM0336C1E8R0DB01#
8.1pF
±0.5pF GJM0335C1E6R7DB01#
±0.1pF GJM0336C1E8R1BB01#
±0.25pF GJM0336C1E8R1CB01#
±0.1pF GJM0335C1E6R8BB01#
±0.5pF GJM0336C1E8R1DB01#
8.2pF
±0.1pF GJM0336C1E8R2BB01#
±0.05pF GJM0336C1E6R9WB01#
±0.25pF GJM0336C1E8R2CB01#
±0.1pF GJM0336C1E6R9BB01#
±0.5pF GJM0336C1E8R2DB01#
8.3pF
±0.5pF GJM0336C1E6R9DB01#
±0.1pF GJM0336C1E8R3BB01#
±0.25pF GJM0336C1E8R3CB01#
±0.1pF GJM0336C1E7R0BB01#
±0.5pF GJM0336C1E8R3DB01#
8.4pF
±0.5pF GJM0336C1E7R0DB01#
±0.1pF GJM0336C1E8R4BB01#
±0.25pF GJM0336C1E8R4CB01#
±0.1pF GJM0336C1E7R1BB01#
±0.5pF GJM0336C1E8R4DB01#
8.5pF
±0.5pF GJM0336C1E7R1DB01#
±0.1pF GJM0336C1E8R5BB01#
±0.25pF GJM0336C1E8R5CB01#
±0.1pF GJM0336C1E7R2BB01#
±0.5pF GJM0336C1E8R5DB01#
8.6pF
±0.1pF GJM0336C1E8R6BB01#
±0.05pF GJM0336C1E7R3WB01#
±0.25pF GJM0336C1E8R6CB01#
±0.1pF GJM0336C1E7R3BB01#
±0.5pF GJM0336C1E8R6DB01#
8.7pF
±0.05pF GJM0336C1E8R7WB01#
±0.5pF GJM0336C1E7R3DB01#
±0.1pF GJM0336C1E8R7BB01#
±0.05pF GJM0336C1E7R4WB01#
±0.25pF GJM0336C1E8R7CB01#
±0.1pF GJM0336C1E7R4BB01#
±0.25pF GJM0336C1E7R4CB01#
7.5pF
±0.05pF GJM0336C1E8R6WB01#
±0.5pF GJM0336C1E7R2DB01#
±0.25pF GJM0336C1E7R3CB01#
7.4pF
±0.05pF GJM0336C1E8R5WB01#
±0.05pF GJM0336C1E7R2WB01#
±0.25pF GJM0336C1E7R2CB01#
7.3pF
±0.05pF GJM0336C1E8R4WB01#
±0.05pF GJM0336C1E7R1WB01#
±0.25pF GJM0336C1E7R1CB01#
7.2pF
±0.05pF GJM0336C1E8R3WB01#
±0.05pF GJM0336C1E7R0WB01#
±0.25pF GJM0336C1E7R0CB01#
7.1pF
±0.05pF GJM0336C1E8R2WB01#
±0.5pF GJM0335C1E6R8DB01#
±0.25pF GJM0336C1E6R9CB01#
7.0pF
±0.05pF GJM0336C1E8R1WB01#
±0.05pF GJM0335C1E6R8WB01#
±0.25pF GJM0335C1E6R8CB01#
C0H
±0.05pF GJM0336C1E8R0WB01#
±0.05pF GJM0335C1E6R7WB01#
±0.25pF GJM0335C1E6R7CB01#
6.8pF
±0.05pF GJM0336C1E7R9WB01#
±0.5pF GJM0335C1E6R5DB01#
±0.1pF GJM0335C1E6R6BB01#
6.7pF
±0.05pF GJM0336C1E7R8WB01#
±0.5pF GJM0335C1E6R4DB01#
±0.25pF GJM0335C1E6R5CB01#
6.6pF
±0.05pF GJM0336C1E7R7WB01#
±0.05pF GJM0335C1E6R4WB01#
±0.25pF GJM0335C1E6R4CB01#
6.5pF
Part Number
7.5pF
±0.1pF GJM0335C1E6R2BB01#
±0.25pF GJM0335C1E6R2CB01#
Tol.
±0.5pF GJM0336C1E8R7DB01#
8.8pF
±0.05pF GJM0336C1E8R8WB01#
±0.5pF GJM0336C1E7R4DB01#
±0.1pF GJM0336C1E8R8BB01#
±0.05pF GJM0336C1E7R5WB01#
±0.25pF GJM0336C1E8R8CB01#
±0.1pF GJM0336C1E7R5BB01#
For General Purpose
GRM Series
0.33mm 25Vdc
Cap.
Capacitor Array
GNM Series
Rated
TC
Voltage Code
Low ESL
LLp Series
±0.05pF GJM0335C1E6R2WB01#
T
max.
High-Q Type
GJM Series
6.2pF
Part Number
High Frequency
GQM Series
C0G
Tol.
Monolithic Microchip
GMA Series
0.33mm 25Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
±0.5pF GJM0336C1E8R8DB01#
Part number # indicates the package specification code.
91
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 0.6×0.3mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.33mm 25Vdc
C0H
Cap.
8.9pF
Tol.
Part Number
±0.05pF GJM0336C1E8R9WB01#
T
max.
Rated
TC
Voltage Code
0.33mm 25Vdc
C0H
Cap.
Tol.
16pF
±2%
GJM0336C1E160GB01#
±5%
GJM0336C1E160JB01#
±2%
GJM0336C1E180GB01#
±5%
GJM0336C1E180JB01#
±2%
GJM0336C1E200GB01#
±5%
GJM0336C1E200JB01#
±0.1pF GJM0336C1E8R9BB01#
±0.25pF GJM0336C1E8R9CB01#
18pF
±0.5pF GJM0336C1E8R9DB01#
9.0pF
±0.05pF GJM0336C1E9R0WB01#
20pF
±0.1pF GJM0336C1E9R0BB01#
±0.25pF GJM0336C1E9R0CB01#
CK
0.2pF
±0.05pF GJM0334C1ER20WB01#
0.3pF
±0.05pF GJM0334C1ER30WB01#
±0.5pF GJM0336C1E9R0DB01#
Capacitor Array
GNM Series
9.1pF
±0.05pF GJM0336C1E9R1WB01#
±0.1pF GJM0334C1ER20BB01#
±0.1pF GJM0336C1E9R1BB01#
±0.25pF GJM0336C1E9R1CB01#
±0.1pF GJM0334C1ER30BB01#
0.4pF
±0.05pF GJM0334C1ER40WB01#
0.5pF
±0.05pF GJM0334C1ER50WB01#
0.6pF
±0.05pF GJM0334C1ER60WB01#
±0.5pF GJM0336C1E9R1DB01#
9.2pF
±0.05pF GJM0336C1E9R2WB01#
±0.1pF GJM0334C1ER40BB01#
±0.1pF GJM0336C1E9R2BB01#
±0.25pF GJM0336C1E9R2CB01#
±0.1pF GJM0334C1ER50BB01#
Low ESL
LLp Series
±0.5pF GJM0336C1E9R2DB01#
9.3pF
±0.05pF GJM0336C1E9R3WB01#
±0.1pF GJM0334C1ER60BB01#
0.7pF
±0.05pF GJM0334C1ER70WB01#
0.8pF
±0.05pF GJM0334C1ER80WB01#
0.9pF
±0.05pF GJM0334C1ER90WB01#
1.0pF
±0.05pF GJM0334C1E1R0WB01#
±0.1pF GJM0336C1E9R3BB01#
±0.25pF GJM0336C1E9R3CB01#
±0.1pF GJM0334C1ER70BB01#
±0.5pF GJM0336C1E9R3DB01#
9.4pF
±0.05pF GJM0336C1E9R4WB01#
±0.1pF GJM0334C1ER80BB01#
±0.1pF GJM0336C1E9R4BB01#
High-Q Type
GJM Series
±0.25pF GJM0336C1E9R4CB01#
9.5pF
±0.5pF GJM0336C1E9R4DB01#
±0.1pF GJM0334C1E1R0BB01#
±0.25pF GJM0334C1E1R0CB01#
±0.1pF GJM0334C1E1R1BB01#
±0.25pF GJM0334C1E1R1CB01#
High Frequency
GQM Series
±0.05pF GJM0336C1E9R6WB01#
1.2pF
±0.1pF GJM0334C1E1R2BB01#
±0.25pF GJM0336C1E9R6CB01#
±0.25pF GJM0334C1E1R2CB01#
1.3pF
±0.1pF GJM0334C1E1R3BB01#
±0.1pF GJM0336C1E9R7BB01#
±0.25pF GJM0334C1E1R3CB01#
Monolithic Microchip
GMA Series
1.4pF
±0.05pF GJM0334C1E1R4WB01#
±0.5pF GJM0336C1E9R7DB01#
±0.1pF GJM0334C1E1R4BB01#
±0.05pF GJM0336C1E9R8WB01#
±0.25pF GJM0334C1E1R4CB01#
1.5pF
±0.05pF GJM0334C1E1R5WB01#
±0.25pF GJM0336C1E9R8CB01#
±0.1pF GJM0334C1E1R5BB01#
±0.5pF GJM0336C1E9R8DB01#
±0.25pF GJM0334C1E1R5CB01#
±0.05pF GJM0336C1E9R9WB01#
1.6pF
For Bonding
GMD Series
±0.5pF GJM0336C1E9R9DB01#
±0.05pF GJM0334C1E1R6WB01#
±0.1pF GJM0334C1E1R6BB01#
±0.25pF GJM0336C1E9R9CB01#
11pF
±0.05pF GJM0334C1E1R3WB01#
±0.05pF GJM0336C1E9R7WB01#
±0.1pF GJM0336C1E9R9BB01#
10pF
±0.05pF GJM0334C1E1R2WB01#
±0.1pF GJM0336C1E9R6BB01#
±0.1pF GJM0336C1E9R8BB01#
9.9pF
±0.05pF GJM0334C1E1R1WB01#
±0.5pF GJM0336C1E9R5DB01#
±0.25pF GJM0336C1E9R7CB01#
9.8pF
1.1pF
±0.25pF GJM0336C1E9R5CB01#
±0.5pF GJM0336C1E9R6DB01#
9.7pF
±0.1pF GJM0334C1ER90BB01#
±0.05pF GJM0336C1E9R5WB01#
±0.1pF GJM0336C1E9R5BB01#
9.6pF
Part Number
±0.25pF GJM0334C1E1R6CB01#
1.7pF
±0.05pF GJM0334C1E1R7WB01#
±2%
GJM0336C1E100GB01#
±0.1pF GJM0334C1E1R7BB01#
±5%
GJM0336C1E100JB01#
±0.25pF GJM0334C1E1R7CB01#
±2%
GJM0336C1E110GB01#
1.8pF
±0.05pF GJM0334C1E1R8WB01#
Product Information
±5%
GJM0336C1E110JB01#
±0.1pF GJM0334C1E1R8BB01#
12pF
±2%
GJM0336C1E120GB01#
±0.25pF GJM0334C1E1R8CB01#
±5%
GJM0336C1E120JB01#
13pF
±2%
GJM0336C1E130GB01#
±0.1pF GJM0334C1E1R9BB01#
±5%
GJM0336C1E130JB01#
±0.25pF GJM0334C1E1R9CB01#
±2%
GJM0336C1E150GB01#
±5%
GJM0336C1E150JB01#
15pF
1.9pF
2.0pF
±0.05pF GJM0334C1E1R9WB01#
±0.05pF GJM0334C1E2R0WB01#
±0.1pF GJM0334C1E2R0BB01#
Part number # indicates the package specification code.
92
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 0.6×0.3mm)
±0.05pF GJM0333C1E2R1WB01#
2.2pF
2.3pF
2.4pF
2.5pF
2.6pF
2.7pF
0.33mm 25Vdc
CJ
±0.25pF GJM0333C1E3R8CB01#
3.9pF
±0.05pF GJM0333C1E3R9WB01#
±0.1pF GJM0333C1E2R1BB01#
±0.1pF GJM0333C1E3R9BB01#
±0.25pF GJM0333C1E2R1CB01#
±0.25pF GJM0333C1E3R9CB01#
±0.05pF GJM0333C1E2R2WB01#
CH
4.0pF
3.0pF
3.1pF
3.2pF
3.3pF
3.4pF
±0.1pF GJM0333C1E2R2BB01#
±0.1pF GJM0332C1E4R0BB01#
±0.25pF GJM0332C1E4R0CB01#
±0.05pF GJM0333C1E2R3WB01#
4.1pF
±0.1pF GJM0332C1E4R1BB01#
±0.25pF GJM0333C1E2R3CB01#
±0.25pF GJM0332C1E4R1CB01#
±0.05pF GJM0333C1E2R4WB01#
4.2pF
±0.1pF GJM0332C1E4R2BB01#
±0.25pF GJM0333C1E2R4CB01#
±0.25pF GJM0332C1E4R2CB01#
±0.05pF GJM0333C1E2R5WB01#
4.3pF
±0.1pF GJM0332C1E4R3BB01#
±0.25pF GJM0333C1E2R5CB01#
±0.25pF GJM0332C1E4R3CB01#
±0.05pF GJM0333C1E2R6WB01#
4.4pF
±0.05pF GJM0332C1E4R4WB01#
±0.1pF GJM0333C1E2R6BB01#
±0.1pF GJM0332C1E4R4BB01#
±0.25pF GJM0333C1E2R6CB01#
±0.25pF GJM0332C1E4R4CB01#
±0.05pF GJM0333C1E2R7WB01#
4.5pF
±0.05pF GJM0333C1E2R8WB01#
±0.05pF GJM0332C1E4R5WB01#
±0.1pF GJM0332C1E4R5BB01#
±0.25pF GJM0332C1E4R5CB01#
4.6pF
±0.05pF GJM0332C1E4R6WB01#
±0.1pF GJM0333C1E2R8BB01#
±0.1pF GJM0332C1E4R6BB01#
±0.25pF GJM0333C1E2R8CB01#
±0.25pF GJM0332C1E4R6CB01#
±0.05pF GJM0333C1E2R9WB01#
4.7pF
±0.05pF GJM0332C1E4R7WB01#
±0.1pF GJM0333C1E2R9BB01#
±0.1pF GJM0332C1E4R7BB01#
±0.25pF GJM0333C1E2R9CB01#
±0.25pF GJM0332C1E4R7CB01#
±0.05pF GJM0333C1E3R0WB01#
4.8pF
±0.05pF GJM0332C1E4R8WB01#
±0.1pF GJM0333C1E3R0BB01#
±0.1pF GJM0332C1E4R8BB01#
±0.25pF GJM0333C1E3R0CB01#
±0.25pF GJM0332C1E4R8CB01#
±0.05pF GJM0333C1E3R1WB01#
4.9pF
±0.05pF GJM0332C1E4R9WB01#
±0.1pF GJM0333C1E3R1BB01#
±0.1pF GJM0332C1E4R9BB01#
±0.25pF GJM0333C1E3R1CB01#
±0.25pF GJM0332C1E4R9CB01#
±0.05pF GJM0333C1E3R2WB01#
5.0pF
±0.05pF GJM0332C1E5R0WB01#
±0.1pF GJM0333C1E3R2BB01#
±0.1pF GJM0332C1E5R0BB01#
±0.25pF GJM0333C1E3R2CB01#
±0.25pF GJM0332C1E5R0CB01#
±0.05pF GJM0333C1E3R3WB01#
5.1pF
±0.05pF GJM0332C1E5R1WB01#
±0.1pF GJM0333C1E3R3BB01#
±0.1pF GJM0332C1E5R1BB01#
±0.25pF GJM0333C1E3R3CB01#
±0.25pF GJM0332C1E5R1CB01#
±0.05pF GJM0333C1E3R4WB01#
±0.5pF GJM0332C1E5R1DB01#
5.2pF
±0.05pF GJM0332C1E5R2WB01#
±0.25pF GJM0333C1E3R4CB01#
±0.1pF GJM0332C1E5R2BB01#
±0.05pF GJM0333C1E3R5WB01#
±0.25pF GJM0332C1E5R2CB01#
±0.5pF GJM0332C1E5R2DB01#
5.3pF
±0.05pF GJM0332C1E5R3WB01#
±0.05pF GJM0333C1E3R6WB01#
±0.1pF GJM0332C1E5R3BB01#
±0.1pF GJM0333C1E3R6BB01#
±0.25pF GJM0332C1E5R3CB01#
±0.25pF GJM0333C1E3R6CB01#
3.8pF
±0.05pF GJM0332C1E4R3WB01#
±0.1pF GJM0333C1E2R5BB01#
±0.1pF GJM0333C1E3R5BB01#
3.7pF
±0.05pF GJM0332C1E4R2WB01#
±0.1pF GJM0333C1E2R4BB01#
±0.25pF GJM0333C1E3R5CB01#
3.6pF
±0.05pF GJM0332C1E4R1WB01#
±0.1pF GJM0333C1E2R3BB01#
±0.1pF GJM0333C1E3R4BB01#
3.5pF
±0.05pF GJM0332C1E4R0WB01#
±0.25pF GJM0333C1E2R2CB01#
±0.25pF GJM0333C1E2R7CB01#
2.9pF
Part Number
3.8pF
±0.1pF GJM0333C1E2R7BB01#
2.8pF
Tol.
±0.05pF GJM0333C1E3R7WB01#
±0.5pF GJM0332C1E5R3DB01#
5.4pF
±0.05pF GJM0332C1E5R4WB01#
±0.1pF GJM0333C1E3R7BB01#
±0.1pF GJM0332C1E5R4BB01#
±0.25pF GJM0333C1E3R7CB01#
±0.25pF GJM0332C1E5R4CB01#
±0.05pF GJM0333C1E3R8WB01#
±0.5pF GJM0332C1E5R4DB01#
±0.1pF GJM0333C1E3R8BB01#
For General Purpose
GRM Series
±0.25pF GJM0334C1E2R0CB01#
2.1pF
Cap.
Capacitor Array
GNM Series
2.0pF
CJ
Rated
TC
Voltage Code
Low ESL
LLp Series
CK
T
max.
High-Q Type
GJM Series
Part Number
High Frequency
GQM Series
Tol.
Monolithic Microchip
GMA Series
0.33mm 25Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
5.5pF
±0.05pF GJM0332C1E5R5WB01#
Part number # indicates the package specification code.
93
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 0.6×0.3mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.33mm 25Vdc
CH
Cap.
5.5pF
Tol.
Part Number
±0.1pF GJM0332C1E5R5BB01#
±0.25pF GJM0332C1E5R5CB01#
5.6pF
Rated
TC
Voltage Code
0.33mm 25Vdc
CH
Cap.
6.8pF
±0.5pF GJM0332C1E6R8DB01#
6.9pF
±0.05pF GJM0332C1E6R9WB01#
±0.1pF GJM0332C1E6R9BB01#
±0.25pF GJM0332C1E6R9CB01#
±0.1pF GJM0332C1E5R6BB01#
±0.5pF GJM0332C1E6R9DB01#
7.0pF
±0.1pF GJM0332C1E7R0BB01#
±0.05pF GJM0332C1E5R7WB01#
±0.25pF GJM0332C1E7R0CB01#
Capacitor Array
GNM Series
±0.5pF GJM0332C1E7R0DB01#
7.1pF
±0.5pF GJM0332C1E5R7DB01#
±0.1pF GJM0332C1E7R1BB01#
±0.25pF GJM0332C1E7R1CB01#
±0.1pF GJM0332C1E5R8BB01#
±0.5pF GJM0332C1E7R1DB01#
7.2pF
Low ESL
LLp Series
±0.1pF GJM0332C1E7R2BB01#
±0.05pF GJM0332C1E5R9WB01#
±0.25pF GJM0332C1E7R2CB01#
±0.1pF GJM0332C1E5R9BB01#
±0.5pF GJM0332C1E7R2DB01#
7.3pF
±0.5pF GJM0332C1E5R9DB01#
±0.1pF GJM0332C1E7R3BB01#
±0.25pF GJM0332C1E7R3CB01#
±0.1pF GJM0332C1E6R0BB01#
±0.5pF GJM0332C1E7R3DB01#
7.4pF
High-Q Type
GJM Series
±0.1pF GJM0332C1E7R4BB01#
±0.05pF GJM0332C1E6R1WB01#
±0.25pF GJM0332C1E7R4CB01#
±0.1pF GJM0332C1E6R1BB01#
±0.5pF GJM0332C1E7R4DB01#
7.5pF
±0.5pF GJM0332C1E6R1DB01#
±0.1pF GJM0332C1E7R5BB01#
±0.25pF GJM0332C1E7R5CB01#
High Frequency
GQM Series
±0.1pF GJM0332C1E6R2BB01#
±0.5pF GJM0332C1E7R5DB01#
7.6pF
±0.1pF GJM0332C1E7R6BB01#
±0.05pF GJM0332C1E6R3WB01#
±0.25pF GJM0332C1E7R6CB01#
±0.25pF GJM0332C1E6R3CB01#
±0.5pF GJM0332C1E7R6DB01#
7.7pF
Monolithic Microchip
GMA Series
±0.5pF GJM0332C1E6R3DB01#
±0.1pF GJM0332C1E7R7BB01#
±0.25pF GJM0332C1E7R7CB01#
±0.1pF GJM0332C1E6R4BB01#
±0.5pF GJM0332C1E7R7DB01#
7.8pF
±0.1pF GJM0332C1E7R8BB01#
±0.05pF GJM0332C1E6R5WB01#
±0.25pF GJM0332C1E7R8CB01#
±0.1pF GJM0332C1E6R5BB01#
±0.5pF GJM0332C1E7R8DB01#
7.9pF
±0.05pF GJM0332C1E7R9WB01#
For Bonding
GMD Series
±0.5pF GJM0332C1E6R5DB01#
±0.1pF GJM0332C1E7R9BB01#
±0.05pF GJM0332C1E6R6WB01#
±0.25pF GJM0332C1E7R9CB01#
±0.1pF GJM0332C1E6R6BB01#
±0.25pF GJM0332C1E6R6CB01#
±0.5pF GJM0332C1E7R9DB01#
8.0pF
±0.05pF GJM0332C1E8R0WB01#
±0.5pF GJM0332C1E6R6DB01#
±0.1pF GJM0332C1E8R0BB01#
±0.05pF GJM0332C1E6R7WB01#
±0.25pF GJM0332C1E8R0CB01#
Product Information
±0.1pF GJM0332C1E6R7BB01#
±0.25pF GJM0332C1E6R7CB01#
6.8pF
±0.05pF GJM0332C1E7R8WB01#
±0.5pF GJM0332C1E6R4DB01#
±0.25pF GJM0332C1E6R5CB01#
6.7pF
±0.05pF GJM0332C1E7R7WB01#
±0.05pF GJM0332C1E6R4WB01#
±0.25pF GJM0332C1E6R4CB01#
6.6pF
±0.05pF GJM0332C1E7R6WB01#
±0.5pF GJM0332C1E6R2DB01#
±0.1pF GJM0332C1E6R3BB01#
6.5pF
±0.05pF GJM0332C1E7R5WB01#
±0.05pF GJM0332C1E6R2WB01#
±0.25pF GJM0332C1E6R2CB01#
6.4pF
±0.05pF GJM0332C1E7R4WB01#
±0.5pF GJM0332C1E6R0DB01#
±0.25pF GJM0332C1E6R1CB01#
6.3pF
±0.05pF GJM0332C1E7R3WB01#
±0.05pF GJM0332C1E6R0WB01#
±0.25pF GJM0332C1E6R0CB01#
6.2pF
±0.05pF GJM0332C1E7R2WB01#
±0.5pF GJM0332C1E5R8DB01#
±0.25pF GJM0332C1E5R9CB01#
6.1pF
±0.05pF GJM0332C1E7R1WB01#
±0.05pF GJM0332C1E5R8WB01#
±0.25pF GJM0332C1E5R8CB01#
6.0pF
±0.05pF GJM0332C1E7R0WB01#
±0.5pF GJM0332C1E5R6DB01#
±0.1pF GJM0332C1E5R7BB01#
5.9pF
Part Number
±0.5pF GJM0332C1E5R5DB01#
±0.25pF GJM0332C1E5R7CB01#
5.8pF
Tol.
±0.05pF GJM0332C1E5R6WB01#
±0.25pF GJM0332C1E5R6CB01#
5.7pF
T
max.
±0.5pF GJM0332C1E8R0DB01#
8.1pF
±0.05pF GJM0332C1E8R1WB01#
±0.5pF GJM0332C1E6R7DB01#
±0.1pF GJM0332C1E8R1BB01#
±0.05pF GJM0332C1E6R8WB01#
±0.25pF GJM0332C1E8R1CB01#
±0.1pF GJM0332C1E6R8BB01#
±0.5pF GJM0332C1E8R1DB01#
±0.25pF GJM0332C1E6R8CB01#
8.2pF
±0.05pF GJM0332C1E8R2WB01#
Part number # indicates the package specification code.
94
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 0.6×0.3mm)
CH
8.3pF
9.5pF
±0.5pF GJM0332C1E9R5DB01#
9.6pF
±0.05pF GJM0332C1E9R6WB01#
±0.5pF GJM0332C1E8R2DB01#
±0.1pF GJM0332C1E9R6BB01#
±0.25pF GJM0332C1E9R6CB01#
±0.1pF GJM0332C1E8R3BB01#
±0.5pF GJM0332C1E9R6DB01#
9.7pF
±0.1pF GJM0332C1E9R7BB01#
±0.05pF GJM0332C1E8R4WB01#
±0.25pF GJM0332C1E9R7CB01#
±0.1pF GJM0332C1E8R4BB01#
±0.5pF GJM0332C1E9R7DB01#
9.8pF
±0.5pF GJM0332C1E8R4DB01#
±0.1pF GJM0332C1E9R8BB01#
±0.25pF GJM0332C1E9R8CB01#
±0.1pF GJM0332C1E8R5BB01#
±0.5pF GJM0332C1E9R8DB01#
9.9pF
±0.1pF GJM0332C1E9R9BB01#
±0.05pF GJM0332C1E8R6WB01#
±0.25pF GJM0332C1E9R9CB01#
±0.1pF GJM0332C1E8R6BB01#
±0.5pF GJM0332C1E9R9DB01#
±2%
GJM0332C1E100GB01#
±5%
GJM0332C1E100JB01#
±2%
GJM0332C1E110GB01#
±5%
GJM0332C1E110JB01#
±2%
GJM0332C1E120GB01#
±5%
GJM0332C1E120JB01#
±2%
GJM0332C1E130GB01#
±5%
GJM0332C1E130JB01#
15pF
±2%
GJM0332C1E150GB01#
±5%
GJM0332C1E150JB01#
16pF
±2%
GJM0332C1E160GB01#
±5%
GJM0332C1E160JB01#
±2%
GJM0332C1E180GB01#
±5%
GJM0332C1E180JB01#
±2%
GJM0332C1E200GB01#
±5%
GJM0332C1E200JB01#
±2%
GJM0335C0J220GB01#
±5%
GJM0335C0J220JB01#
±2%
GJM0335C0J240GB01#
±5%
GJM0335C0J240JB01#
±2%
GJM0335C0J270GB01#
±5%
GJM0335C0J270JB01#
±2%
GJM0335C0J300GB01#
±5%
GJM0335C0J300JB01#
33pF
±2%
GJM0335C0J330GB01#
±5%
GJM0335C0J330JB01#
22pF
±2%
GJM0332C0J220GB01#
±5%
GJM0332C0J220JB01#
±2%
GJM0332C0J240GB01#
±5%
GJM0332C0J240JB01#
±2%
GJM0332C0J270GB01#
±5%
GJM0332C0J270JB01#
±2%
GJM0332C0J300GB01#
±5%
GJM0332C0J300JB01#
±2%
GJM0332C0J330GB01#
±5%
GJM0332C0J330JB01#
10pF
±0.5pF GJM0332C1E8R6DB01#
±0.05pF GJM0332C1E8R7WB01#
11pF
±0.1pF GJM0332C1E8R7BB01#
±0.25pF GJM0332C1E8R7CB01#
12pF
±0.5pF GJM0332C1E8R7DB01#
8.8pF
±0.05pF GJM0332C1E8R8WB01#
13pF
±0.1pF GJM0332C1E8R8BB01#
±0.25pF GJM0332C1E8R8CB01#
±0.5pF GJM0332C1E8R8DB01#
8.9pF
±0.05pF GJM0332C1E8R9WB01#
±0.1pF GJM0332C1E8R9BB01#
±0.25pF GJM0332C1E8R9CB01#
18pF
±0.5pF GJM0332C1E8R9DB01#
9.0pF
±0.05pF GJM0332C1E9R0WB01#
20pF
±0.1pF GJM0332C1E9R0BB01#
±0.25pF GJM0332C1E9R0CB01#
6.3Vdc C0G
22pF
±0.5pF GJM0332C1E9R0DB01#
9.1pF
±0.05pF GJM0332C1E9R1WB01#
24pF
±0.1pF GJM0332C1E9R1BB01#
±0.25pF GJM0332C1E9R1CB01#
27pF
±0.5pF GJM0332C1E9R1DB01#
9.2pF
±0.05pF GJM0332C1E9R2WB01#
30pF
±0.1pF GJM0332C1E9R2BB01#
±0.25pF GJM0332C1E9R2CB01#
±0.5pF GJM0332C1E9R2DB01#
9.3pF
±0.05pF GJM0332C1E9R3WB01#
CH
±0.1pF GJM0332C1E9R3BB01#
±0.25pF GJM0332C1E9R3CB01#
24pF
±0.5pF GJM0332C1E9R3DB01#
9.4pF
±0.05pF GJM0332C1E9R4WB01#
27pF
±0.1pF GJM0332C1E9R4BB01#
±0.25pF GJM0332C1E9R4CB01#
30pF
±0.5pF GJM0332C1E9R4DB01#
9.5pF
±0.05pF GJM0332C1E9R9WB01#
±0.5pF GJM0332C1E8R5DB01#
±0.25pF GJM0332C1E8R6CB01#
8.7pF
±0.05pF GJM0332C1E9R8WB01#
±0.05pF GJM0332C1E8R5WB01#
±0.25pF GJM0332C1E8R5CB01#
8.6pF
±0.05pF GJM0332C1E9R7WB01#
±0.5pF GJM0332C1E8R3DB01#
±0.25pF GJM0332C1E8R4CB01#
8.5pF
Part Number
±0.05pF GJM0332C1E8R3WB01#
±0.25pF GJM0332C1E8R3CB01#
8.4pF
Tol.
±0.05pF GJM0332C1E9R5WB01#
±0.1pF GJM0332C1E9R5BB01#
For General Purpose
GRM Series
0.33mm 25Vdc
±0.25pF GJM0332C1E8R2CB01#
Cap.
Capacitor Array
GNM Series
Rated
TC
Voltage Code
Low ESL
LLp Series
±0.1pF GJM0332C1E8R2BB01#
T
max.
33pF
High-Q Type
GJM Series
8.2pF
Part Number
High Frequency
GQM Series
CH
Tol.
Monolithic Microchip
GMA Series
0.33mm 25Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
±0.25pF GJM0332C1E9R5CB01#
Part number # indicates the package specification code.
95
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
T
max.
c 1.0×0.5mm
For General Purpose
GRM Series
T
max.
Rated
TC
Voltage Code
0.55mm 50Vdc
C0G
Cap.
Tol.
Part Number
HiQ
Rated
TC
Voltage Code
0.55mm 50Vdc
C0G
Oct.1,2012
Part Number List
Cap.
2.1pF
Tol.
Part Number
±0.1pF GJM1555C1H2R1BB01#
±0.25pF GJM1555C1H2R1CB01#
0.1pF
±0.05pF GJM1555C1HR10WB01#
2.2pF
±0.05pF GJM1555C1H2R2WB01#
±0.1pF GJM1555C1HR10BB01#
±0.1pF GJM1555C1H2R2BB01#
0.2pF
±0.05pF GJM1555C1HR20WB01#
±0.25pF GJM1555C1H2R2CB01#
0.3pF
±0.05pF GJM1555C1HR30WB01#
±0.1pF GJM1555C1H2R3BB01#
±0.1pF GJM1555C1HR30BB01#
±0.25pF GJM1555C1H2R3CB01#
±0.1pF GJM1555C1HR20BB01#
Capacitor Array
GNM Series
0.4pF
±0.05pF GJM1555C1HR40WB01#
2.3pF
2.4pF
±0.1pF GJM1555C1HR40BB01#
0.5pF
0.6pF
0.7pF
±0.25pF GJM1555C1H2R4CB01#
2.5pF
±0.1pF GJM1555C1H2R5BB01#
±0.1pF GJM1555C1HR60BB01#
±0.25pF GJM1555C1H2R5CB01#
±0.05pF GJM1555C1HR70WB01#
2.6pF
Low ESL
LLp Series
1.0pF
High-Q Type
GJM Series
1.1pF
1.2pF
High Frequency
GQM Series
1.3pF
±0.25pF GJM1555C1H2R6CB01#
2.7pF
±0.1pF GJM1555C1H2R7BB01#
±0.1pF GJM1555C1HR90BB01#
±0.25pF GJM1555C1H2R7CB01#
±0.05pF GJM1555C1H1R0WB01#
2.8pF
±0.1pF GJM1555C1H1R0BB01#
±0.1pF GJM1555C1H2R8BB01#
±0.25pF GJM1555C1H2R8CB01#
±0.05pF GJM1555C1H1R1WB01#
2.9pF
±0.1pF GJM1555C1H2R9BB01#
±0.25pF GJM1555C1H1R1CB01#
±0.25pF GJM1555C1H2R9CB01#
±0.05pF GJM1555C1H1R2WB01#
3.0pF
Monolithic Microchip
GMA Series
For Bonding
GMD Series
1.8pF
1.9pF
Product Information
2.0pF
2.1pF
±0.05pF GJM1555C1H3R0WB01#
±0.1pF GJM1555C1H1R2BB01#
±0.1pF GJM1555C1H3R0BB01#
±0.25pF GJM1555C1H1R2CB01#
±0.25pF GJM1555C1H3R0CB01#
±0.05pF GJM1555C1H1R3WB01#
3.1pF
±0.05pF GJM1555C1H1R4WB01#
±0.05pF GJM1555C1H3R1WB01#
±0.1pF GJM1555C1H3R1BB01#
±0.25pF GJM1555C1H3R1CB01#
3.2pF
±0.05pF GJM1555C1H3R2WB01#
±0.1pF GJM1555C1H1R4BB01#
±0.1pF GJM1555C1H3R2BB01#
±0.25pF GJM1555C1H1R4CB01#
±0.25pF GJM1555C1H3R2CB01#
±0.05pF GJM1555C1H1R5WB01#
3.3pF
±0.05pF GJM1555C1H1R6WB01#
±0.05pF GJM1555C1H3R3WB01#
±0.1pF GJM1555C1H3R3BB01#
±0.25pF GJM1555C1H1R5CB01#
1.7pF
±0.05pF GJM1555C1H2R9WB01#
±0.1pF GJM1555C1H1R1BB01#
±0.1pF GJM1555C1H1R5BB01#
1.6pF
±0.05pF GJM1555C1H2R8WB01#
±0.25pF GJM1555C1H1R0CB01#
±0.25pF GJM1555C1H1R3CB01#
1.5pF
±0.05pF GJM1555C1H2R7WB01#
±0.05pF GJM1555C1HR90WB01#
±0.1pF GJM1555C1H1R3BB01#
1.4pF
±0.05pF GJM1555C1H2R6WB01#
±0.1pF GJM1555C1H2R6BB01#
±0.05pF GJM1555C1HR80WB01#
±0.1pF GJM1555C1HR80BB01#
0.9pF
±0.05pF GJM1555C1H2R5WB01#
±0.05pF GJM1555C1HR60WB01#
±0.1pF GJM1555C1HR70BB01#
0.8pF
±0.05pF GJM1555C1H2R4WB01#
±0.1pF GJM1555C1H2R4BB01#
±0.05pF GJM1555C1HR50WB01#
±0.1pF GJM1555C1HR50BB01#
±0.05pF GJM1555C1H2R3WB01#
±0.25pF GJM1555C1H3R3CB01#
3.4pF
±0.05pF GJM1555C1H3R4WB01#
±0.1pF GJM1555C1H1R6BB01#
±0.1pF GJM1555C1H3R4BB01#
±0.25pF GJM1555C1H1R6CB01#
±0.25pF GJM1555C1H3R4CB01#
±0.05pF GJM1555C1H1R7WB01#
3.5pF
±0.05pF GJM1555C1H3R5WB01#
±0.1pF GJM1555C1H1R7BB01#
±0.1pF GJM1555C1H3R5BB01#
±0.25pF GJM1555C1H1R7CB01#
±0.25pF GJM1555C1H3R5CB01#
±0.05pF GJM1555C1H1R8WB01#
3.6pF
±0.05pF GJM1555C1H3R6WB01#
±0.1pF GJM1555C1H1R8BB01#
±0.1pF GJM1555C1H3R6BB01#
±0.25pF GJM1555C1H1R8CB01#
±0.25pF GJM1555C1H3R6CB01#
±0.05pF GJM1555C1H1R9WB01#
3.7pF
±0.05pF GJM1555C1H3R7WB01#
±0.1pF GJM1555C1H1R9BB01#
±0.1pF GJM1555C1H3R7BB01#
±0.25pF GJM1555C1H1R9CB01#
±0.25pF GJM1555C1H3R7CB01#
±0.05pF GJM1555C1H2R0WB01#
3.8pF
±0.05pF GJM1555C1H3R8WB01#
±0.1pF GJM1555C1H2R0BB01#
±0.1pF GJM1555C1H3R8BB01#
±0.25pF GJM1555C1H2R0CB01#
±0.25pF GJM1555C1H3R8CB01#
±0.05pF GJM1555C1H2R1WB01#
3.9pF
±0.05pF GJM1555C1H3R9WB01#
Part number # indicates the package specification code.
96
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 1.0×0.5mm)
4.2pF
5.5pF
±0.5pF GJM1555C1H5R5DB01#
5.6pF
±0.05pF GJM1555C1H5R6WB01#
±0.1pF GJM1555C1H5R6BB01#
±0.1pF GJM1555C1H4R0BB01#
±0.25pF GJM1555C1H5R6CB01#
±0.25pF GJM1555C1H4R0CB01#
±0.5pF GJM1555C1H5R6DB01#
±0.05pF GJM1555C1H4R1WB01#
5.7pF
±0.1pF GJM1555C1H5R7BB01#
±0.25pF GJM1555C1H4R1CB01#
±0.25pF GJM1555C1H5R7CB01#
±0.05pF GJM1555C1H4R2WB01#
±0.5pF GJM1555C1H5R7DB01#
5.8pF
±0.25pF GJM1555C1H4R2CB01#
±0.1pF GJM1555C1H5R8BB01#
±0.25pF GJM1555C1H5R8CB01#
±0.5pF GJM1555C1H5R8DB01#
5.9pF
±0.1pF GJM1555C1H5R9BB01#
±0.1pF GJM1555C1H4R4BB01#
±0.25pF GJM1555C1H5R9CB01#
±0.05pF GJM1555C1H4R5WB01#
±0.5pF GJM1555C1H5R9DB01#
6.0pF
±0.1pF GJM1555C1H4R5BB01#
±0.1pF GJM1555C1H6R0BB01#
±0.25pF GJM1555C1H6R0CB01#
±0.05pF GJM1555C1H4R6WB01#
±0.5pF GJM1555C1H6R0DB01#
6.1pF
±0.1pF GJM1555C1H6R1BB01#
±0.05pF GJM1555C1H4R7WB01#
±0.25pF GJM1555C1H6R1CB01#
±0.1pF GJM1555C1H4R7BB01#
±0.5pF GJM1555C1H6R1DB01#
6.2pF
5.0pF
±0.1pF GJM1555C1H6R2BB01#
±0.1pF GJM1555C1H4R8BB01#
±0.25pF GJM1555C1H6R2CB01#
±0.05pF GJM1555C1H4R9WB01#
±0.25pF GJM1555C1H4R9CB01#
±0.25pF GJM1555C1H6R3CB01#
±0.05pF GJM1555C1H5R0WB01#
±0.5pF GJM1555C1H6R3DB01#
6.4pF
±0.25pF GJM1555C1H5R0CB01#
±0.1pF GJM1555C1H6R4BB01#
±0.25pF GJM1555C1H6R4CB01#
±0.1pF GJM1555C1H5R1BB01#
±0.5pF GJM1555C1H6R4DB01#
6.5pF
±0.1pF GJM1555C1H6R5BB01#
±0.05pF GJM1555C1H5R2WB01#
±0.25pF GJM1555C1H6R5CB01#
±0.5pF GJM1555C1H6R5DB01#
6.6pF
±0.05pF GJM1555C1H6R6WB01#
±0.5pF GJM1555C1H5R2DB01#
±0.1pF GJM1555C1H6R6BB01#
±0.05pF GJM1555C1H5R3WB01#
±0.25pF GJM1555C1H6R6CB01#
±0.1pF GJM1555C1H5R3BB01#
±0.25pF GJM1555C1H5R3CB01#
±0.5pF GJM1555C1H6R6DB01#
6.7pF
±0.05pF GJM1555C1H6R7WB01#
±0.5pF GJM1555C1H5R3DB01#
±0.1pF GJM1555C1H6R7BB01#
±0.05pF GJM1555C1H5R4WB01#
±0.25pF GJM1555C1H6R7CB01#
±0.1pF GJM1555C1H5R4BB01#
±0.25pF GJM1555C1H5R4CB01#
5.5pF
±0.05pF GJM1555C1H6R5WB01#
±0.5pF GJM1555C1H5R1DB01#
±0.1pF GJM1555C1H5R2BB01#
5.4pF
±0.05pF GJM1555C1H6R4WB01#
±0.05pF GJM1555C1H5R1WB01#
±0.25pF GJM1555C1H5R2CB01#
5.3pF
±0.05pF GJM1555C1H6R3WB01#
±0.1pF GJM1555C1H6R3BB01#
±0.25pF GJM1555C1H5R1CB01#
5.2pF
±0.5pF GJM1555C1H6R2DB01#
6.3pF
±0.1pF GJM1555C1H4R9BB01#
±0.1pF GJM1555C1H5R0BB01#
5.1pF
±0.05pF GJM1555C1H6R2WB01#
±0.05pF GJM1555C1H4R8WB01#
±0.25pF GJM1555C1H4R8CB01#
4.9pF
±0.05pF GJM1555C1H6R1WB01#
±0.25pF GJM1555C1H4R6CB01#
±0.25pF GJM1555C1H4R7CB01#
4.8pF
±0.05pF GJM1555C1H6R0WB01#
±0.25pF GJM1555C1H4R5CB01#
±0.1pF GJM1555C1H4R6BB01#
4.7pF
±0.05pF GJM1555C1H5R9WB01#
±0.05pF GJM1555C1H4R4WB01#
±0.25pF GJM1555C1H4R4CB01#
4.6pF
±0.05pF GJM1555C1H5R8WB01#
±0.05pF GJM1555C1H4R3WB01#
±0.1pF GJM1555C1H4R3BB01#
4.5pF
±0.05pF GJM1555C1H5R7WB01#
±0.1pF GJM1555C1H4R1BB01#
±0.25pF GJM1555C1H4R3CB01#
4.4pF
Part Number
±0.05pF GJM1555C1H4R0WB01#
±0.1pF GJM1555C1H4R2BB01#
4.3pF
C0G
Tol.
±0.5pF GJM1555C1H6R7DB01#
6.8pF
±0.05pF GJM1555C1H6R8WB01#
±0.5pF GJM1555C1H5R4DB01#
±0.1pF GJM1555C1H6R8BB01#
±0.05pF GJM1555C1H5R5WB01#
±0.25pF GJM1555C1H6R8CB01#
±0.1pF GJM1555C1H5R5BB01#
±0.5pF GJM1555C1H6R8DB01#
±0.25pF GJM1555C1H5R5CB01#
For General Purpose
GRM Series
4.1pF
0.55mm 50Vdc
Cap.
Capacitor Array
GNM Series
4.0pF
Rated
TC
Voltage Code
Low ESL
LLp Series
±0.1pF GJM1555C1H3R9BB01#
±0.25pF GJM1555C1H3R9CB01#
T
max.
High-Q Type
GJM Series
3.9pF
Part Number
High Frequency
GQM Series
C0G
Tol.
Monolithic Microchip
GMA Series
0.55mm 50Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
6.9pF
±0.05pF GJM1555C1H6R9WB01#
Part number # indicates the package specification code.
97
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 1.0×0.5mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.55mm 50Vdc
C0G
Cap.
6.9pF
Tol.
Part Number
±0.1pF GJM1555C1H6R9BB01#
±0.25pF GJM1555C1H6R9CB01#
7.0pF
Rated
TC
Voltage Code
0.55mm 50Vdc
C0G
Cap.
8.2pF
±0.5pF GJM1555C1H8R2DB01#
8.3pF
±0.05pF GJM1555C1H8R3WB01#
±0.1pF GJM1555C1H8R3BB01#
±0.25pF GJM1555C1H8R3CB01#
±0.1pF GJM1555C1H7R0BB01#
±0.5pF GJM1555C1H8R3DB01#
8.4pF
±0.1pF GJM1555C1H8R4BB01#
±0.05pF GJM1555C1H7R1WB01#
±0.25pF GJM1555C1H8R4CB01#
Capacitor Array
GNM Series
±0.5pF GJM1555C1H8R4DB01#
8.5pF
±0.5pF GJM1555C1H7R1DB01#
±0.1pF GJM1555C1H8R5BB01#
±0.25pF GJM1555C1H8R5CB01#
±0.1pF GJM1555C1H7R2BB01#
±0.5pF GJM1555C1H8R5DB01#
8.6pF
Low ESL
LLp Series
±0.1pF GJM1555C1H8R6BB01#
±0.05pF GJM1555C1H7R3WB01#
±0.25pF GJM1555C1H8R6CB01#
±0.1pF GJM1555C1H7R3BB01#
±0.5pF GJM1555C1H8R6DB01#
8.7pF
±0.5pF GJM1555C1H7R3DB01#
±0.1pF GJM1555C1H8R7BB01#
±0.25pF GJM1555C1H8R7CB01#
±0.1pF GJM1555C1H7R4BB01#
±0.5pF GJM1555C1H8R7DB01#
8.8pF
High-Q Type
GJM Series
±0.1pF GJM1555C1H8R8BB01#
±0.05pF GJM1555C1H7R5WB01#
±0.25pF GJM1555C1H8R8CB01#
±0.1pF GJM1555C1H7R5BB01#
±0.5pF GJM1555C1H8R8DB01#
8.9pF
±0.5pF GJM1555C1H7R5DB01#
±0.1pF GJM1555C1H8R9BB01#
±0.25pF GJM1555C1H8R9CB01#
High Frequency
GQM Series
±0.1pF GJM1555C1H7R6BB01#
±0.5pF GJM1555C1H8R9DB01#
9.0pF
±0.1pF GJM1555C1H9R0BB01#
±0.05pF GJM1555C1H7R7WB01#
±0.25pF GJM1555C1H9R0CB01#
±0.25pF GJM1555C1H7R7CB01#
±0.5pF GJM1555C1H9R0DB01#
9.1pF
Monolithic Microchip
GMA Series
±0.5pF GJM1555C1H7R7DB01#
±0.1pF GJM1555C1H9R1BB01#
±0.25pF GJM1555C1H9R1CB01#
±0.1pF GJM1555C1H7R8BB01#
±0.5pF GJM1555C1H9R1DB01#
9.2pF
±0.1pF GJM1555C1H9R2BB01#
±0.05pF GJM1555C1H7R9WB01#
±0.25pF GJM1555C1H9R2CB01#
±0.1pF GJM1555C1H7R9BB01#
±0.5pF GJM1555C1H9R2DB01#
9.3pF
±0.05pF GJM1555C1H9R3WB01#
For Bonding
GMD Series
±0.5pF GJM1555C1H7R9DB01#
±0.1pF GJM1555C1H9R3BB01#
±0.05pF GJM1555C1H8R0WB01#
±0.25pF GJM1555C1H9R3CB01#
±0.1pF GJM1555C1H8R0BB01#
±0.25pF GJM1555C1H8R0CB01#
±0.5pF GJM1555C1H9R3DB01#
9.4pF
±0.05pF GJM1555C1H9R4WB01#
±0.5pF GJM1555C1H8R0DB01#
±0.1pF GJM1555C1H9R4BB01#
±0.05pF GJM1555C1H8R1WB01#
±0.25pF GJM1555C1H9R4CB01#
Product Information
±0.1pF GJM1555C1H8R1BB01#
±0.25pF GJM1555C1H8R1CB01#
8.2pF
±0.05pF GJM1555C1H9R2WB01#
±0.5pF GJM1555C1H7R8DB01#
±0.25pF GJM1555C1H7R9CB01#
8.1pF
±0.05pF GJM1555C1H9R1WB01#
±0.05pF GJM1555C1H7R8WB01#
±0.25pF GJM1555C1H7R8CB01#
8.0pF
±0.05pF GJM1555C1H9R0WB01#
±0.5pF GJM1555C1H7R6DB01#
±0.1pF GJM1555C1H7R7BB01#
7.9pF
±0.05pF GJM1555C1H8R9WB01#
±0.05pF GJM1555C1H7R6WB01#
±0.25pF GJM1555C1H7R6CB01#
7.8pF
±0.05pF GJM1555C1H8R8WB01#
±0.5pF GJM1555C1H7R4DB01#
±0.25pF GJM1555C1H7R5CB01#
7.7pF
±0.05pF GJM1555C1H8R7WB01#
±0.05pF GJM1555C1H7R4WB01#
±0.25pF GJM1555C1H7R4CB01#
7.6pF
±0.05pF GJM1555C1H8R6WB01#
±0.5pF GJM1555C1H7R2DB01#
±0.25pF GJM1555C1H7R3CB01#
7.5pF
±0.05pF GJM1555C1H8R5WB01#
±0.05pF GJM1555C1H7R2WB01#
±0.25pF GJM1555C1H7R2CB01#
7.4pF
±0.05pF GJM1555C1H8R4WB01#
±0.5pF GJM1555C1H7R0DB01#
±0.1pF GJM1555C1H7R1BB01#
7.3pF
Part Number
±0.5pF GJM1555C1H6R9DB01#
±0.25pF GJM1555C1H7R1CB01#
7.2pF
Tol.
±0.05pF GJM1555C1H7R0WB01#
±0.25pF GJM1555C1H7R0CB01#
7.1pF
T
max.
±0.5pF GJM1555C1H9R4DB01#
9.5pF
±0.05pF GJM1555C1H9R5WB01#
±0.5pF GJM1555C1H8R1DB01#
±0.1pF GJM1555C1H9R5BB01#
±0.05pF GJM1555C1H8R2WB01#
±0.25pF GJM1555C1H9R5CB01#
±0.1pF GJM1555C1H8R2BB01#
±0.5pF GJM1555C1H9R5DB01#
±0.25pF GJM1555C1H8R2CB01#
9.6pF
±0.05pF GJM1555C1H9R6WB01#
Part number # indicates the package specification code.
98
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 1.0×0.5mm)
Tol.
43pF
±5%
GJM1555C1H430JB01#
47pF
±1%
GJM1555C1H470FB01#
±0.5pF GJM1555C1H9R6DB01#
±2%
GJM1555C1H470GB01#
±0.05pF GJM1555C1H9R7WB01#
±5%
GJM1555C1H470JB01#
±0.1pF GJM1555C1H9R6BB01#
0.55mm 50Vdc
C0G
±0.25pF GJM1555C1H9R6CB01#
9.7pF
±0.1pF GJM1555C1H9R7BB01#
CK
0.1pF
±0.05pF GJM1554C1HR10WB01#
0.2pF
±0.05pF GJM1554C1HR20WB01#
0.3pF
±0.05pF GJM1554C1HR30WB01#
±0.25pF GJM1555C1H9R7CB01#
±0.5pF GJM1555C1H9R7DB01#
9.8pF
±0.1pF GJM1554C1HR10BB01#
±0.05pF GJM1555C1H9R8WB01#
±0.1pF GJM1555C1H9R8BB01#
±0.1pF GJM1554C1HR20BB01#
±0.25pF GJM1555C1H9R8CB01#
±0.5pF GJM1555C1H9R8DB01#
9.9pF
±0.1pF GJM1554C1HR30BB01#
0.4pF
±0.05pF GJM1554C1HR40WB01#
0.5pF
±0.05pF GJM1554C1HR50WB01#
0.6pF
±0.05pF GJM1554C1HR60WB01#
±0.05pF GJM1555C1H9R9WB01#
±0.1pF GJM1555C1H9R9BB01#
±0.1pF GJM1554C1HR40BB01#
±0.25pF GJM1555C1H9R9CB01#
±0.5pF GJM1555C1H9R9DB01#
Part Number
±0.1pF GJM1554C1HR50BB01#
10pF
±2%
GJM1555C1H100GB01#
±5%
GJM1555C1H100JB01#
11pF
±2%
GJM1555C1H110GB01#
±5%
GJM1555C1H110JB01#
±2%
GJM1555C1H120GB01#
±5%
GJM1555C1H120JB01#
±2%
GJM1555C1H130GB01#
±5%
GJM1555C1H130JB01#
±2%
GJM1555C1H150GB01#
±0.1pF GJM1554C1H1R0BB01#
±5%
GJM1555C1H150JB01#
±0.25pF GJM1554C1H1R0CB01#
16pF
±2%
GJM1555C1H160GB01#
±5%
GJM1555C1H160JB01#
±0.1pF GJM1554C1H1R1BB01#
18pF
±2%
GJM1555C1H180GB01#
±0.25pF GJM1554C1H1R1CB01#
±5%
GJM1555C1H180JB01#
20pF
±2%
GJM1555C1H200GB01#
±0.1pF GJM1554C1H1R2BB01#
±5%
GJM1555C1H200JB01#
±0.25pF GJM1554C1H1R2CB01#
±1%
GJM1555C1H220FB01#
±2%
GJM1555C1H220GB01#
±0.1pF GJM1554C1H1R3BB01#
±5%
GJM1555C1H220JB01#
±0.25pF GJM1554C1H1R3CB01#
±1%
GJM1555C1H240FB01#
±2%
GJM1555C1H240GB01#
±0.1pF GJM1554C1H1R4BB01#
±5%
GJM1555C1H240JB01#
±0.25pF GJM1554C1H1R4CB01#
±1%
GJM1555C1H270FB01#
±2%
GJM1555C1H270GB01#
±0.1pF GJM1554C1H1R5BB01#
±5%
GJM1555C1H270JB01#
±0.25pF GJM1554C1H1R5CB01#
±1%
GJM1555C1H300FB01#
±2%
GJM1555C1H300GB01#
12pF
13pF
15pF
22pF
24pF
27pF
30pF
33pF
36pF
39pF
43pF
For General Purpose
GRM Series
Cap.
Capacitor Array
GNM Series
Rated
TC
Voltage Code
Low ESL
LLp Series
T
max.
±0.1pF GJM1554C1HR60BB01#
0.7pF
±0.05pF GJM1554C1HR70WB01#
0.8pF
±0.05pF GJM1554C1HR80WB01#
0.9pF
±0.05pF GJM1554C1HR90WB01#
1.0pF
±0.05pF GJM1554C1H1R0WB01#
±0.1pF GJM1554C1HR70BB01#
±0.1pF GJM1554C1HR80BB01#
±0.1pF GJM1554C1HR90BB01#
1.1pF
1.2pF
1.3pF
1.4pF
1.5pF
1.6pF
High-Q Type
GJM Series
9.6pF
Part Number
±0.05pF GJM1554C1H1R1WB01#
High Frequency
GQM Series
C0G
Tol.
±0.05pF GJM1554C1H1R2WB01#
±0.05pF GJM1554C1H1R3WB01#
±0.05pF GJM1554C1H1R4WB01#
Monolithic Microchip
GMA Series
0.55mm 50Vdc
Cap.
±0.05pF GJM1554C1H1R5WB01#
±0.05pF GJM1554C1H1R6WB01#
±0.1pF GJM1554C1H1R6BB01#
±5%
GJM1555C1H300JB01#
±1%
GJM1555C1H330FB01#
±0.25pF GJM1554C1H1R6CB01#
±2%
GJM1555C1H330GB01#
±0.1pF GJM1554C1H1R7BB01#
±5%
GJM1555C1H330JB01#
±0.25pF GJM1554C1H1R7CB01#
±1%
GJM1555C1H360FB01#
±2%
GJM1555C1H360GB01#
±0.1pF GJM1554C1H1R8BB01#
±5%
GJM1555C1H360JB01#
±0.25pF GJM1554C1H1R8CB01#
±1%
GJM1555C1H390FB01#
±2%
GJM1555C1H390GB01#
±0.1pF GJM1554C1H1R9BB01#
±5%
GJM1555C1H390JB01#
±0.25pF GJM1554C1H1R9CB01#
±1%
GJM1555C1H430FB01#
±2%
GJM1555C1H430GB01#
1.7pF
1.8pF
1.9pF
2.0pF
For Bonding
GMD Series
Rated
TC
Voltage Code
±0.05pF GJM1554C1H1R7WB01#
±0.05pF GJM1554C1H1R8WB01#
Product Information
T
max.
±0.05pF GJM1554C1H1R9WB01#
±0.05pF GJM1554C1H2R0WB01#
±0.1pF GJM1554C1H2R0BB01#
Part number # indicates the package specification code.
99
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 1.0×0.5mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.55mm 50Vdc
Cap.
Tol.
Part Number
CK
2.0pF
±0.25pF GJM1554C1H2R0CB01#
CJ
2.1pF
±0.05pF GJM1553C1H2R1WB01#
2.2pF
2.3pF
Capacitor Array
GNM Series
2.4pF
2.5pF
Low ESL
LLp Series
2.6pF
2.7pF
T
max.
Rated
TC
Voltage Code
0.55mm 50Vdc
CJ
Cap.
±0.25pF GJM1553C1H3R8CB01#
3.9pF
±0.05pF GJM1553C1H3R9WB01#
±0.1pF GJM1553C1H2R1BB01#
±0.1pF GJM1553C1H3R9BB01#
±0.25pF GJM1553C1H2R1CB01#
±0.25pF GJM1553C1H3R9CB01#
±0.05pF GJM1553C1H2R2WB01#
CH
4.0pF
High-Q Type
GJM Series
High Frequency
GQM Series
3.0pF
3.1pF
Monolithic Microchip
GMA Series
3.2pF
3.3pF
3.4pF
±0.1pF GJM1553C1H2R2BB01#
±0.1pF GJM1552C1H4R0BB01#
±0.25pF GJM1552C1H4R0CB01#
±0.05pF GJM1553C1H2R3WB01#
4.1pF
±0.1pF GJM1552C1H4R1BB01#
±0.25pF GJM1553C1H2R3CB01#
±0.25pF GJM1552C1H4R1CB01#
±0.05pF GJM1553C1H2R4WB01#
4.2pF
±0.1pF GJM1552C1H4R2BB01#
±0.25pF GJM1553C1H2R4CB01#
±0.25pF GJM1552C1H4R2CB01#
±0.05pF GJM1553C1H2R5WB01#
4.3pF
±0.1pF GJM1552C1H4R3BB01#
±0.25pF GJM1553C1H2R5CB01#
±0.25pF GJM1552C1H4R3CB01#
±0.05pF GJM1553C1H2R6WB01#
4.4pF
±0.05pF GJM1552C1H4R4WB01#
±0.1pF GJM1553C1H2R6BB01#
±0.1pF GJM1552C1H4R4BB01#
±0.25pF GJM1553C1H2R6CB01#
±0.25pF GJM1552C1H4R4CB01#
±0.05pF GJM1553C1H2R7WB01#
4.5pF
±0.05pF GJM1553C1H2R8WB01#
±0.05pF GJM1552C1H4R5WB01#
±0.1pF GJM1552C1H4R5BB01#
±0.25pF GJM1552C1H4R5CB01#
4.6pF
±0.05pF GJM1552C1H4R6WB01#
±0.1pF GJM1553C1H2R8BB01#
±0.1pF GJM1552C1H4R6BB01#
±0.25pF GJM1553C1H2R8CB01#
±0.25pF GJM1552C1H4R6CB01#
±0.05pF GJM1553C1H2R9WB01#
4.7pF
±0.05pF GJM1552C1H4R7WB01#
±0.1pF GJM1553C1H2R9BB01#
±0.1pF GJM1552C1H4R7BB01#
±0.25pF GJM1553C1H2R9CB01#
±0.25pF GJM1552C1H4R7CB01#
±0.05pF GJM1553C1H3R0WB01#
4.8pF
±0.05pF GJM1552C1H4R8WB01#
±0.1pF GJM1553C1H3R0BB01#
±0.1pF GJM1552C1H4R8BB01#
±0.25pF GJM1553C1H3R0CB01#
±0.25pF GJM1552C1H4R8CB01#
±0.05pF GJM1553C1H3R1WB01#
4.9pF
±0.05pF GJM1552C1H4R9WB01#
±0.1pF GJM1553C1H3R1BB01#
±0.1pF GJM1552C1H4R9BB01#
±0.25pF GJM1553C1H3R1CB01#
±0.25pF GJM1552C1H4R9CB01#
±0.05pF GJM1553C1H3R2WB01#
5.0pF
±0.05pF GJM1552C1H5R0WB01#
±0.1pF GJM1553C1H3R2BB01#
±0.1pF GJM1552C1H5R0BB01#
±0.25pF GJM1553C1H3R2CB01#
±0.25pF GJM1552C1H5R0CB01#
±0.05pF GJM1553C1H3R3WB01#
5.1pF
±0.05pF GJM1552C1H5R1WB01#
±0.1pF GJM1553C1H3R3BB01#
±0.1pF GJM1552C1H5R1BB01#
±0.25pF GJM1553C1H3R3CB01#
±0.25pF GJM1552C1H5R1CB01#
±0.05pF GJM1553C1H3R4WB01#
±0.5pF GJM1552C1H5R1DB01#
5.2pF
±0.05pF GJM1552C1H5R2WB01#
For Bonding
GMD Series
±0.25pF GJM1553C1H3R4CB01#
±0.1pF GJM1552C1H5R2BB01#
±0.05pF GJM1553C1H3R5WB01#
±0.25pF GJM1552C1H5R2CB01#
±0.5pF GJM1552C1H5R2DB01#
5.3pF
±0.05pF GJM1552C1H5R3WB01#
±0.05pF GJM1553C1H3R6WB01#
±0.1pF GJM1552C1H5R3BB01#
±0.1pF GJM1553C1H3R6BB01#
±0.25pF GJM1552C1H5R3CB01#
Product Information
±0.25pF GJM1553C1H3R6CB01#
3.8pF
±0.05pF GJM1552C1H4R3WB01#
±0.1pF GJM1553C1H2R5BB01#
±0.1pF GJM1553C1H3R5BB01#
3.7pF
±0.05pF GJM1552C1H4R2WB01#
±0.1pF GJM1553C1H2R4BB01#
±0.25pF GJM1553C1H3R5CB01#
3.6pF
±0.05pF GJM1552C1H4R1WB01#
±0.1pF GJM1553C1H2R3BB01#
±0.1pF GJM1553C1H3R4BB01#
3.5pF
±0.05pF GJM1552C1H4R0WB01#
±0.25pF GJM1553C1H2R2CB01#
±0.25pF GJM1553C1H2R7CB01#
2.9pF
Part Number
3.8pF
±0.1pF GJM1553C1H2R7BB01#
2.8pF
Tol.
±0.05pF GJM1553C1H3R7WB01#
±0.5pF GJM1552C1H5R3DB01#
5.4pF
±0.05pF GJM1552C1H5R4WB01#
±0.1pF GJM1553C1H3R7BB01#
±0.1pF GJM1552C1H5R4BB01#
±0.25pF GJM1553C1H3R7CB01#
±0.25pF GJM1552C1H5R4CB01#
±0.05pF GJM1553C1H3R8WB01#
±0.5pF GJM1552C1H5R4DB01#
±0.1pF GJM1553C1H3R8BB01#
5.5pF
±0.05pF GJM1552C1H5R5WB01#
Part number # indicates the package specification code.
100
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 1.0×0.5mm)
6.8pF
±0.5pF GJM1552C1H6R8DB01#
6.9pF
±0.05pF GJM1552C1H6R9WB01#
±0.5pF GJM1552C1H5R5DB01#
±0.1pF GJM1552C1H6R9BB01#
±0.25pF GJM1552C1H6R9CB01#
±0.1pF GJM1552C1H5R6BB01#
±0.5pF GJM1552C1H6R9DB01#
7.0pF
±0.1pF GJM1552C1H7R0BB01#
±0.05pF GJM1552C1H5R7WB01#
±0.25pF GJM1552C1H7R0CB01#
±0.1pF GJM1552C1H5R7BB01#
±0.5pF GJM1552C1H7R0DB01#
7.1pF
±0.5pF GJM1552C1H5R7DB01#
±0.1pF GJM1552C1H7R1BB01#
±0.25pF GJM1552C1H7R1CB01#
±0.1pF GJM1552C1H5R8BB01#
±0.5pF GJM1552C1H7R1DB01#
7.2pF
±0.1pF GJM1552C1H7R2BB01#
±0.05pF GJM1552C1H5R9WB01#
±0.25pF GJM1552C1H7R2CB01#
±0.1pF GJM1552C1H5R9BB01#
±0.5pF GJM1552C1H7R2DB01#
7.3pF
±0.5pF GJM1552C1H5R9DB01#
±0.1pF GJM1552C1H7R3BB01#
±0.25pF GJM1552C1H7R3CB01#
±0.1pF GJM1552C1H6R0BB01#
±0.5pF GJM1552C1H7R3DB01#
7.4pF
±0.1pF GJM1552C1H7R4BB01#
±0.05pF GJM1552C1H6R1WB01#
±0.25pF GJM1552C1H7R4CB01#
±0.1pF GJM1552C1H6R1BB01#
±0.5pF GJM1552C1H7R4DB01#
7.5pF
±0.5pF GJM1552C1H6R1DB01#
±0.1pF GJM1552C1H7R5BB01#
±0.25pF GJM1552C1H7R5CB01#
±0.1pF GJM1552C1H6R2BB01#
±0.5pF GJM1552C1H7R5DB01#
7.6pF
±0.1pF GJM1552C1H7R6BB01#
±0.05pF GJM1552C1H6R3WB01#
±0.25pF GJM1552C1H7R6CB01#
±0.25pF GJM1552C1H6R3CB01#
±0.5pF GJM1552C1H7R6DB01#
7.7pF
±0.5pF GJM1552C1H6R3DB01#
±0.1pF GJM1552C1H7R7BB01#
±0.25pF GJM1552C1H7R7CB01#
±0.1pF GJM1552C1H6R4BB01#
±0.5pF GJM1552C1H7R7DB01#
7.8pF
±0.1pF GJM1552C1H7R8BB01#
±0.05pF GJM1552C1H6R5WB01#
±0.25pF GJM1552C1H7R8CB01#
±0.1pF GJM1552C1H6R5BB01#
±0.5pF GJM1552C1H7R8DB01#
7.9pF
±0.5pF GJM1552C1H6R5DB01#
±0.1pF GJM1552C1H7R9BB01#
±0.25pF GJM1552C1H7R9CB01#
±0.1pF GJM1552C1H6R6BB01#
±0.5pF GJM1552C1H7R9DB01#
8.0pF
±0.05pF GJM1552C1H8R0WB01#
±0.5pF GJM1552C1H6R6DB01#
±0.1pF GJM1552C1H8R0BB01#
±0.05pF GJM1552C1H6R7WB01#
±0.25pF GJM1552C1H8R0CB01#
±0.1pF GJM1552C1H6R7BB01#
±0.25pF GJM1552C1H6R7CB01#
6.8pF
±0.05pF GJM1552C1H7R9WB01#
±0.05pF GJM1552C1H6R6WB01#
±0.25pF GJM1552C1H6R6CB01#
6.7pF
±0.05pF GJM1552C1H7R8WB01#
±0.5pF GJM1552C1H6R4DB01#
±0.25pF GJM1552C1H6R5CB01#
6.6pF
±0.05pF GJM1552C1H7R7WB01#
±0.05pF GJM1552C1H6R4WB01#
±0.25pF GJM1552C1H6R4CB01#
6.5pF
±0.05pF GJM1552C1H7R6WB01#
±0.5pF GJM1552C1H6R2DB01#
±0.1pF GJM1552C1H6R3BB01#
6.4pF
±0.05pF GJM1552C1H7R5WB01#
±0.05pF GJM1552C1H6R2WB01#
±0.25pF GJM1552C1H6R2CB01#
6.3pF
±0.05pF GJM1552C1H7R4WB01#
±0.5pF GJM1552C1H6R0DB01#
±0.25pF GJM1552C1H6R1CB01#
6.2pF
±0.05pF GJM1552C1H7R3WB01#
±0.05pF GJM1552C1H6R0WB01#
±0.25pF GJM1552C1H6R0CB01#
6.1pF
±0.05pF GJM1552C1H7R2WB01#
±0.5pF GJM1552C1H5R8DB01#
±0.25pF GJM1552C1H5R9CB01#
6.0pF
±0.05pF GJM1552C1H7R1WB01#
±0.05pF GJM1552C1H5R8WB01#
±0.25pF GJM1552C1H5R8CB01#
5.9pF
±0.05pF GJM1552C1H7R0WB01#
±0.5pF GJM1552C1H5R6DB01#
±0.25pF GJM1552C1H5R7CB01#
5.8pF
Part Number
±0.5pF GJM1552C1H8R0DB01#
8.1pF
±0.05pF GJM1552C1H8R1WB01#
±0.5pF GJM1552C1H6R7DB01#
±0.1pF GJM1552C1H8R1BB01#
±0.05pF GJM1552C1H6R8WB01#
±0.25pF GJM1552C1H8R1CB01#
±0.1pF GJM1552C1H6R8BB01#
±0.5pF GJM1552C1H8R1DB01#
±0.25pF GJM1552C1H6R8CB01#
For General Purpose
GRM Series
CH
Tol.
±0.05pF GJM1552C1H5R6WB01#
±0.25pF GJM1552C1H5R6CB01#
5.7pF
0.55mm 50Vdc
Cap.
Capacitor Array
GNM Series
5.6pF
Rated
TC
Voltage Code
Low ESL
LLp Series
±0.1pF GJM1552C1H5R5BB01#
±0.25pF GJM1552C1H5R5CB01#
T
max.
High-Q Type
GJM Series
5.5pF
Part Number
High Frequency
GQM Series
CH
Tol.
Monolithic Microchip
GMA Series
0.55mm 50Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
8.2pF
±0.05pF GJM1552C1H8R2WB01#
Part number # indicates the package specification code.
101
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 1.0×0.5mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.55mm 50Vdc
CH
Cap.
8.2pF
Tol.
Part Number
±0.1pF GJM1552C1H8R2BB01#
±0.25pF GJM1552C1H8R2CB01#
8.3pF
Rated
TC
Voltage Code
0.55mm 50Vdc
CH
Cap.
9.5pF
±0.5pF GJM1552C1H9R5DB01#
9.6pF
±0.05pF GJM1552C1H9R6WB01#
±0.1pF GJM1552C1H9R6BB01#
±0.25pF GJM1552C1H9R6CB01#
±0.1pF GJM1552C1H8R3BB01#
±0.5pF GJM1552C1H9R6DB01#
9.7pF
±0.1pF GJM1552C1H9R7BB01#
±0.05pF GJM1552C1H8R4WB01#
±0.25pF GJM1552C1H9R7CB01#
Capacitor Array
GNM Series
±0.5pF GJM1552C1H9R7DB01#
9.8pF
±0.5pF GJM1552C1H8R4DB01#
±0.1pF GJM1552C1H9R8BB01#
±0.25pF GJM1552C1H9R8CB01#
±0.1pF GJM1552C1H8R5BB01#
±0.5pF GJM1552C1H9R8DB01#
9.9pF
Low ESL
LLp Series
±0.1pF GJM1552C1H9R9BB01#
±0.05pF GJM1552C1H8R6WB01#
±0.25pF GJM1552C1H9R9CB01#
±0.1pF GJM1552C1H8R6BB01#
±0.5pF GJM1552C1H9R9DB01#
±2%
GJM1552C1H100GB01#
±5%
GJM1552C1H100JB01#
±2%
GJM1552C1H110GB01#
±5%
GJM1552C1H110JB01#
±2%
GJM1552C1H120GB01#
±5%
GJM1552C1H120JB01#
±2%
GJM1552C1H130GB01#
±5%
GJM1552C1H130JB01#
15pF
±2%
GJM1552C1H150GB01#
±5%
GJM1552C1H150JB01#
16pF
±2%
GJM1552C1H160GB01#
±5%
GJM1552C1H160JB01#
±2%
GJM1552C1H180GB01#
±5%
GJM1552C1H180JB01#
±2%
GJM1552C1H200GB01#
±5%
GJM1552C1H200JB01#
±1%
GJM1552C1H220FB01#
±0.5pF GJM1552C1H9R0DB01#
±2%
GJM1552C1H220GB01#
±0.05pF GJM1552C1H9R1WB01#
±5%
GJM1552C1H220JB01#
±1%
GJM1552C1H240FB01#
±0.25pF GJM1552C1H9R1CB01#
±2%
GJM1552C1H240GB01#
±0.5pF GJM1552C1H9R1DB01#
±5%
GJM1552C1H240JB01#
±1%
GJM1552C1H270FB01#
±0.1pF GJM1552C1H9R2BB01#
±2%
GJM1552C1H270GB01#
±0.25pF GJM1552C1H9R2CB01#
±5%
GJM1552C1H270JB01#
10pF
±0.5pF GJM1552C1H8R6DB01#
±0.05pF GJM1552C1H8R7WB01#
11pF
±0.1pF GJM1552C1H8R7BB01#
±0.25pF GJM1552C1H8R7CB01#
12pF
High-Q Type
GJM Series
±0.5pF GJM1552C1H8R7DB01#
±0.05pF GJM1552C1H8R8WB01#
13pF
±0.1pF GJM1552C1H8R8BB01#
±0.25pF GJM1552C1H8R8CB01#
±0.5pF GJM1552C1H8R8DB01#
8.9pF
±0.05pF GJM1552C1H8R9WB01#
High Frequency
GQM Series
±0.1pF GJM1552C1H8R9BB01#
±0.25pF GJM1552C1H8R9CB01#
18pF
±0.5pF GJM1552C1H8R9DB01#
9.0pF
±0.05pF GJM1552C1H9R0WB01#
20pF
±0.1pF GJM1552C1H9R0BB01#
±0.25pF GJM1552C1H9R0CB01#
Monolithic Microchip
GMA Series
9.1pF
±0.1pF GJM1552C1H9R1BB01#
9.2pF
±0.05pF GJM1552C1H9R2WB01#
For Bonding
GMD Series
±0.5pF GJM1552C1H9R2DB01#
9.3pF
22pF
24pF
27pF
±1%
GJM1552C1H300FB01#
±0.05pF GJM1552C1H9R3WB01#
±2%
GJM1552C1H300GB01#
±0.1pF GJM1552C1H9R3BB01#
±5%
GJM1552C1H300JB01#
±1%
GJM1552C1H330FB01#
±2%
GJM1552C1H330GB01#
±5%
GJM1552C1H330JB01#
±1%
GJM1552C1H360FB01#
±0.25pF GJM1552C1H9R4CB01#
±2%
GJM1552C1H360GB01#
±0.5pF GJM1552C1H9R4DB01#
±5%
GJM1552C1H360JB01#
±1%
GJM1552C1H390FB01#
±2%
GJM1552C1H390GB01#
±5%
GJM1552C1H390JB01#
±0.25pF GJM1552C1H9R3CB01#
30pF
33pF
±0.5pF GJM1552C1H9R3DB01#
9.4pF
±0.05pF GJM1552C1H9R4WB01#
Product Information
±0.1pF GJM1552C1H9R4BB01#
9.5pF
±0.05pF GJM1552C1H9R9WB01#
±0.5pF GJM1552C1H8R5DB01#
±0.25pF GJM1552C1H8R6CB01#
8.8pF
±0.05pF GJM1552C1H9R8WB01#
±0.05pF GJM1552C1H8R5WB01#
±0.25pF GJM1552C1H8R5CB01#
8.7pF
±0.05pF GJM1552C1H9R7WB01#
±0.5pF GJM1552C1H8R3DB01#
±0.1pF GJM1552C1H8R4BB01#
8.6pF
Part Number
±0.5pF GJM1552C1H8R2DB01#
±0.25pF GJM1552C1H8R4CB01#
8.5pF
Tol.
±0.05pF GJM1552C1H8R3WB01#
±0.25pF GJM1552C1H8R3CB01#
8.4pF
T
max.
±0.05pF GJM1552C1H9R5WB01#
±0.1pF GJM1552C1H9R5BB01#
±0.25pF GJM1552C1H9R5CB01#
36pF
39pF
Part number # indicates the package specification code.
102
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GJM Series Temperature Compensating Type
HiQ
C02E.pdf
Oct.1,2012
Part Number List
(→ c 1.0×0.5mm)
GJM1552C1H430JB01#
±1%
GJM1552C1H470FB01#
±2%
GJM1552C1H470GB01#
±5%
GJM1552C1H470JB01#
For General Purpose
GRM Series
GJM1552C1H430GB01#
±5%
Capacitor Array
GNM Series
GJM1552C1H430FB01#
±2%
Low ESL
LLp Series
±1%
High-Q Type
GJM Series
43pF
47pF
Part Number
High Frequency
GQM Series
CH
Tol.
Monolithic Microchip
GMA Series
0.55mm 50Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
Part number # indicates the package specification code.
103
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors
High Frequency GQM Series
For General Purpose
GRM Series
Capacitor for high frequency suitable for PA designs.
e
g
e
T
Capacitor Array
GNM Series
W
L
1 HiQ and low ESR in UHF and microwave frequency bands.
2 Highly conductive copper was adopted for the internal electrodes.
3 Product compatible to tight tolerances.
Low ESL
LLp Series
4 Achieved high withstand voltages.
5 Ideal for improving the characteristics and reducing power consumption in RF equipment.
High-Q Type
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
104
HiQ
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
T
max.
c 1.6×0.8mm
Rated
TC
Voltage Code
Cap.
0.8mm 250Vdc C0G
0.1pF
±0.1pF GQM1875C2ER10BB12#
0.2pF
±0.1pF GQM1875C2ER20BB12#
0.3pF
±0.1pF GQM1875C2ER30BB12#
Tol.
Part Number
Part Number List
Rated
TC
Voltage Code
Cap.
0.8mm 250Vdc C0G
6.0pF
±0.25pF GQM1875C2E6R0CB12#
6.2pF
±0.25pF GQM1875C2E6R2CB12#
6.8pF
±0.25pF GQM1875C2E6R8CB12#
7.0pF
±0.25pF GQM1875C2E7R0CB12#
7.5pF
±0.25pF GQM1875C2E7R5CB12#
Tol.
Part Number
±0.5pF GQM1875C2E6R0DB12#
±0.5pF GQM1875C2E6R2DB12#
±0.25pF GQM1875C2ER30CB12#
±0.5pF GQM1875C2E6R8DB12#
±0.1pF GQM1875C2ER40BB12#
±0.25pF GQM1875C2ER40CB12#
±0.25pF GQM1875C2ER50CB12#
±0.5pF GQM1875C2E7R5DB12#
±0.1pF GQM1875C2ER75BB12#
8.0pF
±0.25pF GQM1875C2E8R0CB12#
8.2pF
±0.25pF GQM1875C2E8R2CB12#
9.0pF
±0.25pF GQM1875C2E9R0CB12#
±0.25pF GQM1875C2ER75CB12#
±0.5pF GQM1875C2E8R0DB12#
±0.1pF GQM1875C2E1R0BB12#
±0.25pF GQM1875C2E1R0CB12#
±0.5pF GQM1875C2E8R2DB12#
±0.1pF GQM1875C2E1R1BB12#
±0.25pF GQM1875C2E1R1CB12#
1.2pF
±0.5pF GQM1875C2E9R0DB12#
±0.1pF GQM1875C2E1R2BB12#
9.1pF
±0.25pF GQM1875C2E1R2CB12#
1.3pF
±2%
GQM1875C2E100GB12#
±5%
GQM1875C2E100JB12#
11pF
±2%
GQM1875C2E110GB12#
±5%
GQM1875C2E110JB12#
12pF
±2%
GQM1875C2E120GB12#
±5%
GQM1875C2E120JB12#
±2%
GQM1875C2E130GB12#
±5%
GQM1875C2E130JB12#
±2%
GQM1875C2E150GB12#
±5%
GQM1875C2E150JB12#
±2%
GQM1875C2E160GB12#
±5%
GQM1875C2E160JB12#
18pF
±2%
GQM1875C2E180GB12#
±5%
GQM1875C2E180JB12#
20pF
±2%
GQM1875C2E200GB12#
±5%
GQM1875C2E200JB12#
±2%
GQM1875C2E220GB12#
±5%
GQM1875C2E220JB12#
24pF
±2%
GQM1875C2E240GB12#
±5%
GQM1875C2E240JB12#
27pF
±2%
GQM1875C2E270GB12#
±5%
GQM1875C2E270JB12#
±2%
GQM1875C2E300GB12#
±5%
GQM1875C2E300JB12#
±2%
GQM1875C2E330GB12#
±5%
GQM1875C2E330JB12#
±2%
GQM1875C2E360GB12#
±5%
GQM1875C2E360JB12#
±2%
GQM1875C2E390GB12#
±5%
GQM1875C2E390JB12#
±2%
GQM1875C2E430GB12#
±5%
GQM1875C2E430JB12#
±2%
GQM1875C2E470GB12#
±5%
GQM1875C2E470JB12#
10pF
±0.1pF GQM1875C2E1R5BB12#
±0.25pF GQM1875C2E1R5CB12#
1.6pF
±0.1pF GQM1875C2E1R6BB12#
±0.25pF GQM1875C2E1R6CB12#
1.8pF
±0.1pF GQM1875C2E1R8BB12#
13pF
±0.25pF GQM1875C2E1R8CB12#
2.0pF
±0.1pF GQM1875C2E2R0BB12#
15pF
±0.25pF GQM1875C2E2R0CB12#
2.2pF
±0.1pF GQM1875C2E2R2BB12#
16pF
±0.25pF GQM1875C2E2R2CB12#
2.4pF
±0.1pF GQM1875C2E2R4BB12#
±0.25pF GQM1875C2E2R4CB12#
2.7pF
±0.1pF GQM1875C2E2R7BB12#
±0.25pF GQM1875C2E2R7CB12#
3.0pF
±0.1pF GQM1875C2E3R0BB12#
22pF
±0.25pF GQM1875C2E3R0CB12#
3.3pF
±0.1pF GQM1875C2E3R3BB12#
±0.25pF GQM1875C2E3R3CB12#
3.6pF
±0.1pF GQM1875C2E3R6BB12#
±0.25pF GQM1875C2E3R6CB12#
3.9pF
±0.1pF GQM1875C2E3R9BB12#
30pF
±0.25pF GQM1875C2E3R9CB12#
4.0pF
±0.1pF GQM1875C2E4R0BB12#
33pF
±0.25pF GQM1875C2E4R0CB12#
4.3pF
±0.1pF GQM1875C2E4R3BB12#
36pF
±0.25pF GQM1875C2E4R3CB12#
4.7pF
±0.1pF GQM1875C2E4R7BB12#
39pF
±0.25pF GQM1875C2E4R7CB12#
5.0pF
±0.1pF GQM1875C2E5R0BB12#
43pF
±0.25pF GQM1875C2E5R0CB12#
5.1pF
±0.25pF GQM1875C2E5R1CB12#
47pF
±0.5pF GQM1875C2E5R1DB12#
5.6pF
±0.25pF GQM1875C2E5R6CB12#
±0.5pF GQM1875C2E5R6DB12#
±0.25pF GQM1875C2E9R1CB12#
±0.5pF GQM1875C2E9R1DB12#
±0.1pF GQM1875C2E1R3BB12#
±0.25pF GQM1875C2E1R3CB12#
1.5pF
Low ESL
LLp Series
1.1pF
0.9mm 100Vdc C0G
0.5pF
High-Q Type
GJM Series
1.0pF
High Frequency
GQM Series
0.75pF
Capacitor Array
GNM Series
±0.5pF GQM1875C2E7R0DB12#
±0.1pF GQM1875C2ER50BB12#
Monolithic Microchip
GMA Series
0.5pF
For Bonding
GMD Series
0.4pF
Product Information
T
max.
HiQ
For General Purpose
GRM Series
GQM Series Temperature Compensating Type
Oct.1,2012
±0.1pF GQM1885C2AR50BB01#
±0.25pF GQM1885C2AR50CB01#
Part number # indicates the package specification code.
105
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 1.6×0.8mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.9mm 100Vdc C0G
Cap.
0.75pF
Tol.
Part Number
±0.1pF GQM1885C2AR75BB01#
T
max.
Rated
TC
Voltage Code
0.9mm 100Vdc
CK
Cap.
1.0pF
±0.25pF GQM1885C2AR75CB01#
1.0pF
±0.1pF GQM1885C2A1R0BB01#
1.1pF
±0.1pF GQM1885C2A1R1BB01#
1.2pF
1.3pF
Capacitor Array
GNM Series
±0.1pF GQM1885C2A1R3BB01#
1.5pF
±0.1pF GQM1885C2A1R5BB01#
1.6pF
±0.1pF GQM1885C2A1R6BB01#
1.8pF
±0.1pF GQM1885C2A1R8BB01#
2.0pF
Low ESL
LLp Series
±0.1pF GQM1885C2A2R0BB01#
CJ
2.2pF
±0.1pF GQM1885C2A2R2BB01#
2.4pF
±0.1pF GQM1885C2A2R4BB01#
2.7pF
High-Q Type
GJM Series
3.0pF
±0.1pF GQM1885C2A3R0BB01#
3.3pF
±0.1pF GQM1885C2A3R3BB01#
3.6pF
High Frequency
GQM Series
±0.1pF GQM1885C2A3R6BB01#
3.9pF
±0.1pF GQM1885C2A3R9BB01#
CH
4.0pF
4.3pF
Monolithic Microchip
GMA Series
±0.1pF GQM1885C2A4R3BB01#
4.7pF
5.1pF
±0.25pF GQM1885C2A5R1CB01#
±0.1pF GQM1882C2A5R0BB01#
5.1pF
±0.25pF GQM1882C2A5R1CB01#
5.6pF
±0.25pF GQM1882C2A5R6CB01#
±0.25pF GQM1882C2A5R0CB01#
±0.25pF GQM1885C2A5R0CB01#
±0.5pF GQM1882C2A5R1DB01#
±0.5pF GQM1885C2A5R1DB01#
For Bonding
GMD Series
5.6pF
±0.5pF GQM1882C2A5R6DB01#
±0.25pF GQM1885C2A5R6CB01#
6.0pF
±0.25pF GQM1882C2A6R0CB01#
6.2pF
±0.25pF GQM1882C2A6R2CB01#
6.8pF
±0.25pF GQM1882C2A6R8CB01#
7.0pF
±0.25pF GQM1885C1H7R0CB01#
7.5pF
±0.25pF GQM1885C1H7R5CB01#
8.0pF
±0.25pF GQM1885C1H8R0CB01#
±0.5pF GQM1885C2A5R6DB01#
6.0pF
±0.25pF GQM1885C2A6R0CB01#
6.2pF
±0.25pF GQM1885C2A6R2CB01#
6.8pF
±0.25pF GQM1885C2A6R8CB01#
0.5pF
±0.1pF GQM1884C2AR50BB01#
±0.5pF GQM1882C2A6R0DB01#
±0.5pF GQM1885C2A6R0DB01#
±0.5pF GQM1882C2A6R2DB01#
±0.5pF GQM1885C2A6R2DB01#
±0.5pF GQM1882C2A6R8DB01#
Product Information
50Vdc
C0G
±0.5pF GQM1885C2A6R8DB01#
CK
±0.5pF GQM1885C1H7R0DB01#
±0.25pF GQM1884C2AR50CB01#
0.75pF
±0.1pF GQM1884C2AR75BB01#
±0.25pF GQM1884C2AR75CB01#
±0.1pF GQM1882C2A4R7BB01#
5.0pF
±0.25pF GQM1885C2A4R7CB01#
±0.1pF GQM1885C2A5R0BB01#
±0.1pF GQM1882C2A4R3BB01#
±0.25pF GQM1882C2A4R7CB01#
±0.1pF GQM1885C2A4R7BB01#
5.0pF
±0.1pF GQM1882C2A4R0BB01#
±0.25pF GQM1882C2A4R3CB01#
±0.25pF GQM1885C2A4R3CB01#
4.7pF
±0.1pF GQM1883C2A3R9BB01#
±0.25pF GQM1882C2A4R0CB01#
±0.1pF GQM1885C2A4R0BB01#
±0.25pF GQM1885C2A4R0CB01#
4.3pF
±0.1pF GQM1883C2A3R6BB01#
±0.25pF GQM1883C2A3R9CB01#
±0.25pF GQM1885C2A3R9CB01#
4.0pF
±0.1pF GQM1883C2A3R3BB01#
±0.25pF GQM1883C2A3R6CB01#
±0.25pF GQM1885C2A3R6CB01#
3.9pF
±0.1pF GQM1883C2A3R0BB01#
±0.25pF GQM1883C2A3R3CB01#
±0.25pF GQM1885C2A3R3CB01#
3.6pF
±0.1pF GQM1883C2A2R7BB01#
±0.25pF GQM1883C2A3R0CB01#
±0.25pF GQM1885C2A3R0CB01#
3.3pF
±0.1pF GQM1883C2A2R4BB01#
±0.25pF GQM1883C2A2R7CB01#
±0.1pF GQM1885C2A2R7BB01#
±0.25pF GQM1885C2A2R7CB01#
3.0pF
±0.1pF GQM1883C2A2R2BB01#
±0.25pF GQM1883C2A2R4CB01#
±0.25pF GQM1885C2A2R4CB01#
2.7pF
±0.1pF GQM1884C2A2R0BB01#
±0.25pF GQM1883C2A2R2CB01#
±0.25pF GQM1885C2A2R2CB01#
2.4pF
±0.1pF GQM1884C2A1R8BB01#
±0.25pF GQM1884C2A2R0CB01#
±0.25pF GQM1885C2A2R0CB01#
2.2pF
±0.1pF GQM1884C2A1R6BB01#
±0.25pF GQM1884C2A1R8CB01#
±0.25pF GQM1885C2A1R8CB01#
2.0pF
±0.1pF GQM1884C2A1R5BB01#
±0.25pF GQM1884C2A1R6CB01#
±0.25pF GQM1885C2A1R6CB01#
1.8pF
±0.1pF GQM1884C2A1R3BB01#
±0.25pF GQM1884C2A1R5CB01#
±0.25pF GQM1885C2A1R5CB01#
1.6pF
±0.1pF GQM1884C2A1R2BB01#
±0.25pF GQM1884C2A1R3CB01#
±0.25pF GQM1885C2A1R3CB01#
1.5pF
±0.1pF GQM1884C2A1R1BB01#
±0.25pF GQM1884C2A1R2CB01#
±0.1pF GQM1885C2A1R2BB01#
±0.25pF GQM1885C2A1R2CB01#
1.3pF
±0.1pF GQM1884C2A1R0BB01#
±0.25pF GQM1884C2A1R1CB01#
±0.25pF GQM1885C2A1R1CB01#
1.2pF
Part Number
±0.25pF GQM1884C2A1R0CB01#
±0.25pF GQM1885C2A1R0CB01#
1.1pF
Tol.
±0.5pF GQM1885C1H7R5DB01#
±0.5pF GQM1885C1H8R0DB01#
Part number # indicates the package specification code.
106
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 1.6×0.8mm)
C0G
Tol.
100pF
±2%
GQM1885C1H101GB01#
±5%
GQM1885C1H101JB01#
±0.5pF GQM1885C1H8R2DB01#
9.0pF
±0.25pF GQM1885C1H9R0CB01#
9.1pF
±0.25pF GQM1885C1H9R1CB01#
CH
7.0pF
±0.25pF GQM1882C1H7R0CB01#
7.5pF
±0.25pF GQM1882C1H7R5CB01#
8.0pF
±0.25pF GQM1882C1H8R0CB01#
8.2pF
±0.25pF GQM1882C1H8R2CB01#
±0.5pF GQM1885C1H9R0DB01#
±0.5pF GQM1882C1H7R0DB01#
±0.5pF GQM1885C1H9R1DB01#
10pF
±2%
GQM1885C1H100GB01#
±5%
GQM1885C1H100JB01#
11pF
±2%
GQM1885C1H110GB01#
±5%
GQM1885C1H110JB01#
±2%
GQM1885C1H120GB01#
±5%
GQM1885C1H120JB01#
13pF
±2%
GQM1885C1H130GB01#
±5%
GQM1885C1H130JB01#
15pF
±2%
GQM1885C1H150GB01#
±5%
GQM1885C1H150JB01#
±2%
GQM1885C1H160GB01#
±5%
GQM1885C1H160JB01#
±2%
GQM1885C1H180GB01#
±5%
GQM1885C1H180JB01#
20pF
±2%
GQM1885C1H200GB01#
±5%
GQM1885C1H200JB01#
22pF
±2%
GQM1885C1H220GB01#
±5%
GQM1885C1H220JB01#
±2%
GQM1885C1H240GB01#
±5%
GQM1885C1H240JB01#
±2%
GQM1885C1H270GB01#
±5%
GQM1885C1H270JB01#
±2%
GQM1885C1H300GB01#
±5%
GQM1885C1H300JB01#
33pF
±2%
GQM1885C1H330GB01#
±5%
GQM1885C1H330JB01#
36pF
±2%
GQM1885C1H360GB01#
±5%
GQM1885C1H360JB01#
±2%
GQM1885C1H390GB01#
±5%
GQM1885C1H390JB01#
43pF
±2%
GQM1885C1H430GB01#
±5%
GQM1885C1H430JB01#
47pF
±2%
GQM1885C1H470GB01#
±5%
GQM1885C1H470JB01#
±2%
GQM1885C1H510GB01#
±5%
GQM1885C1H510JB01#
±2%
GQM1885C1H560GB01#
±5%
GQM1885C1H560JB01#
±2%
GQM1885C1H620GB01#
±5%
GQM1885C1H620JB01#
±2%
GQM1885C1H680GB01#
±5%
GQM1885C1H680JB01#
±2%
GQM1885C1H750GB01#
±5%
GQM1885C1H750JB01#
±2%
GQM1885C1H820GB01#
±5%
GQM1885C1H820JB01#
±2%
GQM1885C1H910GB01#
±5%
GQM1885C1H910JB01#
12pF
16pF
18pF
24pF
27pF
30pF
39pF
51pF
56pF
62pF
68pF
75pF
82pF
91pF
Part Number
For General Purpose
GRM Series
50Vdc
Cap.
±0.5pF GQM1882C1H7R5DB01#
±0.5pF GQM1882C1H8R0DB01#
Capacitor Array
GNM Series
0.9mm
Rated
TC
Voltage Code
±0.5pF GQM1882C1H8R2DB01#
9.0pF
±0.25pF GQM1882C1H9R0CB01#
9.1pF
±0.25pF GQM1882C1H9R1CB01#
±0.5pF GQM1882C1H9R0DB01#
±0.5pF GQM1882C1H9R1DB01#
±2%
GQM1882C1H100GB01#
±5%
GQM1882C1H100JB01#
±2%
GQM1882C1H110GB01#
±5%
GQM1882C1H110JB01#
±2%
GQM1882C1H120GB01#
±5%
GQM1882C1H120JB01#
13pF
±2%
GQM1882C1H130GB01#
±5%
GQM1882C1H130JB01#
15pF
±2%
GQM1882C1H150GB01#
±5%
GQM1882C1H150JB01#
±2%
GQM1882C1H160GB01#
±5%
GQM1882C1H160JB01#
±2%
GQM1882C1H180GB01#
±5%
GQM1882C1H180JB01#
±2%
GQM1882C1H200GB01#
±5%
GQM1882C1H200JB01#
22pF
±2%
GQM1882C1H220GB01#
±5%
GQM1882C1H220JB01#
24pF
±2%
GQM1882C1H240GB01#
±5%
GQM1882C1H240JB01#
±2%
GQM1882C1H270GB01#
±5%
GQM1882C1H270JB01#
30pF
±2%
GQM1882C1H300GB01#
±5%
GQM1882C1H300JB01#
33pF
±2%
GQM1882C1H330GB01#
±5%
GQM1882C1H330JB01#
±2%
GQM1882C1H360GB01#
±5%
GQM1882C1H360JB01#
±2%
GQM1882C1H390GB01#
±5%
GQM1882C1H390JB01#
±2%
GQM1882C1H430GB01#
±5%
GQM1882C1H430JB01#
±2%
GQM1882C1H470GB01#
±5%
GQM1882C1H470JB01#
±2%
GQM1882C1H510GB01#
±5%
GQM1882C1H510JB01#
±2%
GQM1882C1H560GB01#
±5%
GQM1882C1H560JB01#
±2%
GQM1882C1H620GB01#
±5%
GQM1882C1H620JB01#
10pF
11pF
12pF
16pF
18pF
20pF
27pF
36pF
39pF
43pF
47pF
51pF
56pF
62pF
Low ESL
LLp Series
±0.25pF GQM1885C1H8R2CB01#
T
max.
High-Q Type
GJM Series
8.2pF
Part Number
High Frequency
GQM Series
C0G
Tol.
Monolithic Microchip
GMA Series
50Vdc
Cap.
For Bonding
GMD Series
0.9mm
Rated
TC
Voltage Code
Product Information
T
max.
Part number # indicates the package specification code.
107
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 1.6×0.8mm)
T
max.
For General Purpose
GRM Series
0.9mm
Rated
TC
Voltage Code
50Vdc
CH
Capacitor Array
GNM Series
Cap.
Tol.
68pF
±2%
GQM1882C1H680GB01#
±5%
GQM1882C1H680JB01#
75pF
±2%
GQM1882C1H750GB01#
±5%
GQM1882C1H750JB01#
82pF
±2%
GQM1882C1H820GB01#
±5%
GQM1882C1H820JB01#
91pF
±2%
GQM1882C1H910GB01#
±5%
GQM1882C1H910JB01#
±2%
GQM1882C1H101GB01#
±5%
GQM1882C1H101JB01#
100pF
Part Number
T
max.
Rated
TC
Voltage Code
Cap.
0.95mm 100Vdc C0G
4.7pF
5.0pF
Tol.
Part Number
±0.25pF GQM2195C2A4R7CB01#
±0.1pF GQM2195C2A5R0BB01#
±0.25pF GQM2195C2A5R0CB01#
5.1pF
±0.25pF GQM2195C2A5R1CB01#
±0.5pF GQM2195C2A5R1DB01#
5.6pF
±0.25pF GQM2195C2A5R6CB01#
6.0pF
±0.25pF GQM2195C2A6R0CB01#
6.2pF
±0.25pF GQM2195C2A6R2CB01#
6.8pF
±0.25pF GQM2195C2A6R8CB01#
7.0pF
±0.25pF GQM2195C2A7R0CB01#
±0.5pF GQM2195C2A5R6DB01#
±0.5pF GQM2195C2A6R0DB01#
±0.5pF GQM2195C2A6R2DB01#
c 2.0×1.25mm
T
max.
±0.5pF GQM2195C2A6R8DB01#
Low ESL
LLp Series
Rated
TC
Voltage Code
Cap.
0.95mm 100Vdc C0G
0.5pF
Tol.
Part Number
±0.5pF GQM2195C2A7R0DB01#
±0.1pF GQM2195C2AR50BB01#
7.5pF
±0.25pF GQM2195C2A7R5CB01#
8.0pF
±0.25pF GQM2195C2A8R0CB01#
8.2pF
±0.25pF GQM2195C2A8R2CB01#
±0.25pF GQM2195C2AR50CB01#
0.75pF
±0.5pF GQM2195C2A7R5DB01#
±0.1pF GQM2195C2AR75BB01#
±0.25pF GQM2195C2AR75CB01#
1.0pF
±0.5pF GQM2195C2A8R0DB01#
±0.1pF GQM2195C2A1R0BB01#
±0.25pF GQM2195C2A1R0CB01#
1.1pF
±0.5pF GQM2195C2A8R2DB01#
±0.1pF GQM2195C2A1R1BB01#
High-Q Type
GJM Series
9.0pF
±0.25pF GQM2195C2A9R0CB01#
9.1pF
±0.25pF GQM2195C2A9R1CB01#
±0.25pF GQM2195C2A1R1CB01#
1.2pF
±0.5pF GQM2195C2A9R0DB01#
±0.1pF GQM2195C2A1R2BB01#
±0.25pF GQM2195C2A1R2CB01#
1.3pF
±0.5pF GQM2195C2A9R1DB01#
±0.1pF GQM2195C2A1R3BB01#
10pF
±2%
GQM2195C2A100GB01#
±5%
GQM2195C2A100JB01#
11pF
±2%
GQM2195C2A110GB01#
±5%
GQM2195C2A110JB01#
±2%
GQM2195C2A120GB01#
±5%
GQM2195C2A120JB01#
±2%
GQM2195C2A130GB01#
±5%
GQM2195C2A130JB01#
±2%
GQM2195C2A150GB01#
±5%
GQM2195C2A150JB01#
±2%
GQM2195C2A160GB01#
±5%
GQM2195C2A160JB01#
±2%
GQM2195C2A180GB01#
±5%
GQM2195C2A180JB01#
±0.25pF GQM2195C2A1R3CB01#
1.5pF
±0.1pF GQM2195C2A1R5BB01#
High Frequency
GQM Series
±0.25pF GQM2195C2A1R5CB01#
1.6pF
±0.1pF GQM2195C2A1R6BB01#
12pF
±0.25pF GQM2195C2A1R6CB01#
1.8pF
±0.1pF GQM2195C2A1R8BB01#
13pF
±0.25pF GQM2195C2A1R8CB01#
2.0pF
±0.1pF GQM2195C2A2R0BB01#
15pF
Monolithic Microchip
GMA Series
±0.25pF GQM2195C2A2R0CB01#
2.2pF
±0.1pF GQM2195C2A2R2BB01#
16pF
±0.25pF GQM2195C2A2R2CB01#
2.4pF
±0.1pF GQM2195C2A2R4BB01#
18pF
±0.25pF GQM2195C2A2R4CB01#
2.7pF
±0.1pF GQM2195C2A2R7BB01#
CK
0.5pF
±0.25pF GQM2195C2A2R7CB01#
3.0pF
±0.1pF GQM2195C2A3R0BB01#
±0.25pF GQM2194C2AR50CB01#
0.75pF
For Bonding
GMD Series
±0.25pF GQM2195C2A3R0CB01#
3.3pF
±0.1pF GQM2195C2A3R3BB01#
±0.1pF GQM2195C2A3R6BB01#
±0.1pF GQM2195C2A3R9BB01#
1.1pF
Product Information
±0.1pF GQM2195C2A4R0BB01#
1.2pF
±0.1pF GQM2195C2A4R3BB01#
1.3pF
±0.1pF GQM2195C2A4R7BB01#
±0.1pF GQM2194C2A1R3BB01#
±0.25pF GQM2194C2A1R3CB01#
1.5pF
±0.1pF GQM2194C2A1R5BB01#
±0.25pF GQM2194C2A1R5CB01#
±0.25pF GQM2195C2A4R3CB01#
4.7pF
±0.1pF GQM2194C2A1R2BB01#
±0.25pF GQM2194C2A1R2CB01#
±0.25pF GQM2195C2A4R0CB01#
4.3pF
±0.1pF GQM2194C2A1R1BB01#
±0.25pF GQM2194C2A1R1CB01#
±0.25pF GQM2195C2A3R9CB01#
4.0pF
±0.1pF GQM2194C2A1R0BB01#
±0.25pF GQM2194C2A1R0CB01#
±0.25pF GQM2195C2A3R6CB01#
3.9pF
±0.1pF GQM2194C2AR75BB01#
±0.25pF GQM2194C2AR75CB01#
1.0pF
±0.25pF GQM2195C2A3R3CB01#
3.6pF
±0.1pF GQM2194C2AR50BB01#
1.6pF
±0.1pF GQM2194C2A1R6BB01#
Part number # indicates the package specification code.
108
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 2.0×1.25mm)
0.95mm 100Vdc
CH
Tol.
12pF
±5%
GQM2192C2A120JB01#
13pF
±2%
GQM2192C2A130GB01#
±5%
GQM2192C2A130JB01#
±2%
GQM2192C2A150GB01#
±5%
GQM2192C2A150JB01#
±2%
GQM2192C2A160GB01#
±5%
GQM2192C2A160JB01#
±2%
GQM2192C2A180GB01#
±5%
GQM2192C2A180JB01#
20pF
±2%
GQM2195C1H200GB01#
±5%
GQM2195C1H200JB01#
22pF
±2%
GQM2195C1H220GB01#
±5%
GQM2195C1H220JB01#
±2%
GQM2195C1H240GB01#
±5%
GQM2195C1H240JB01#
27pF
±2%
GQM2195C1H270GB01#
±5%
GQM2195C1H270JB01#
30pF
±2%
GQM2195C1H300GB01#
±5%
GQM2195C1H300JB01#
±2%
GQM2195C1H330GB01#
±5%
GQM2195C1H330JB01#
±2%
GQM2195C1H360GB01#
±5%
GQM2195C1H360JB01#
±2%
GQM2195C1H390GB01#
±5%
GQM2195C1H390JB01#
43pF
±2%
GQM2195C1H430GB01#
±5%
GQM2195C1H430JB01#
47pF
±2%
GQM2195C1H470GB01#
±5%
GQM2195C1H470JB01#
±2%
GQM2195C1H510GB01#
±5%
GQM2195C1H510JB01#
±2%
GQM2195C1H560GB01#
±5%
GQM2195C1H560JB01#
±2%
GQM2195C1H620GB01#
±5%
GQM2195C1H620JB01#
±2%
GQM2195C1H680GB01#
±5%
GQM2195C1H680JB01#
±2%
GQM2195C1H750GB01#
±5%
GQM2195C1H750JB01#
±2%
GQM2195C1H820GB01#
±5%
GQM2195C1H820JB01#
91pF
±2%
GQM2195C1H910GB01#
±5%
GQM2195C1H910JB01#
100pF
±2%
GQM2195C1H101GB01#
±5%
GQM2195C1H101JB01#
±2%
GQM2192C1H200GB01#
±5%
GQM2192C1H200JB01#
±2%
GQM2192C1H220GB01#
±5%
GQM2192C1H220JB01#
±2%
GQM2192C1H240GB01#
±5%
GQM2192C1H240JB01#
±2%
GQM2192C1H270GB01#
±5%
GQM2192C1H270JB01#
±2%
GQM2192C1H300GB01#
±0.25pF GQM2194C2A1R8CB01#
2.0pF
±0.1pF GQM2194C2A2R0BB01#
15pF
±0.25pF GQM2194C2A2R0CB01#
CJ
2.2pF
±0.1pF GQM2193C2A2R2BB01#
16pF
±0.25pF GQM2193C2A2R2CB01#
2.4pF
±0.1pF GQM2193C2A2R4BB01#
18pF
±0.25pF GQM2193C2A2R4CB01#
2.7pF
±0.1pF GQM2193C2A2R7BB01#
50Vdc
C0G
±0.25pF GQM2193C2A2R7CB01#
3.0pF
±0.1pF GQM2193C2A3R0BB01#
±0.25pF GQM2193C2A3R0CB01#
3.3pF
±0.1pF GQM2193C2A3R3BB01#
24pF
±0.25pF GQM2193C2A3R3CB01#
3.6pF
±0.1pF GQM2193C2A3R6BB01#
±0.25pF GQM2193C2A3R6CB01#
3.9pF
±0.1pF GQM2193C2A3R9BB01#
±0.25pF GQM2193C2A3R9CB01#
CH
4.0pF
±0.1pF GQM2192C2A4R0BB01#
33pF
±0.25pF GQM2192C2A4R0CB01#
4.3pF
±0.1pF GQM2192C2A4R3BB01#
36pF
±0.25pF GQM2192C2A4R3CB01#
4.7pF
±0.1pF GQM2192C2A4R7BB01#
39pF
±0.25pF GQM2192C2A4R7CB01#
5.0pF
±0.1pF GQM2192C2A5R0BB01#
5.1pF
±0.25pF GQM2192C2A5R1CB01#
±0.25pF GQM2192C2A5R0CB01#
±0.5pF GQM2192C2A5R1DB01#
5.6pF
±0.25pF GQM2192C2A5R6CB01#
51pF
±0.5pF GQM2192C2A5R6DB01#
6.0pF
±0.25pF GQM2192C2A6R0CB01#
56pF
±0.5pF GQM2192C2A6R0DB01#
6.2pF
±0.25pF GQM2192C2A6R2CB01#
62pF
±0.5pF GQM2192C2A6R2DB01#
6.8pF
±0.25pF GQM2192C2A6R8CB01#
68pF
±0.5pF GQM2192C2A6R8DB01#
7.0pF
±0.25pF GQM2192C2A7R0CB01#
75pF
±0.5pF GQM2192C2A7R0DB01#
7.5pF
±0.25pF GQM2192C2A7R5CB01#
82pF
±0.5pF GQM2192C2A7R5DB01#
8.0pF
±0.25pF GQM2192C2A8R0CB01#
8.2pF
±0.25pF GQM2192C2A8R2CB01#
±0.5pF GQM2192C2A8R0DB01#
±0.5pF GQM2192C2A8R2DB01#
9.0pF
±0.25pF GQM2192C2A9R0CB01#
CH
20pF
±0.5pF GQM2192C2A9R0DB01#
9.1pF
±0.25pF GQM2192C2A9R1CB01#
22pF
±0.5pF GQM2192C2A9R1DB01#
10pF
11pF
12pF
±2%
GQM2192C2A100GB01#
±5%
GQM2192C2A100JB01#
±2%
GQM2192C2A110GB01#
±5%
GQM2192C2A110JB01#
±2%
GQM2192C2A120GB01#
24pF
27pF
30pF
Part Number
For General Purpose
GRM Series
±0.1pF GQM2194C2A1R8BB01#
Cap.
Capacitor Array
GNM Series
±0.25pF GQM2194C2A1R6CB01#
1.8pF
Rated
TC
Voltage Code
Low ESL
LLp Series
1.6pF
T
max.
High-Q Type
GJM Series
Part Number
High Frequency
GQM Series
CK
Tol.
Monolithic Microchip
GMA Series
0.95mm 100Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
Part number # indicates the package specification code.
109
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 2.0×1.25mm)
T
max.
Rated
TC
Voltage Code
For General Purpose
GRM Series
0.95mm 50Vdc
CH
Cap.
Tol.
30pF
±5%
GQM2192C1H300JB01#
33pF
±2%
GQM2192C1H330GB01#
±5%
GQM2192C1H330JB01#
±2%
GQM2192C1H360GB01#
±5%
GQM2192C1H360JB01#
±2%
GQM2192C1H390GB01#
±5%
GQM2192C1H390JB01#
±2%
GQM2192C1H430GB01#
±5%
GQM2192C1H430JB01#
47pF
±2%
GQM2192C1H470GB01#
±5%
GQM2192C1H470JB01#
51pF
±2%
GQM2192C1H510GB01#
±5%
GQM2192C1H510JB01#
±2%
GQM2192C1H560GB01#
±5%
GQM2192C1H560JB01#
62pF
±2%
GQM2192C1H620GB01#
±5%
GQM2192C1H620JB01#
68pF
±2%
GQM2192C1H680GB01#
±5%
GQM2192C1H680JB01#
75pF
±2%
GQM2192C1H750GB01#
±5%
GQM2192C1H750JB01#
±2%
GQM2192C1H820GB01#
±5%
GQM2192C1H820JB01#
91pF
±2%
GQM2192C1H910GB01#
±5%
GQM2192C1H910JB01#
100pF
±2%
GQM2192C1H101GB01#
±5%
GQM2192C1H101JB01#
36pF
39pF
43pF
Capacitor Array
GNM Series
56pF
Low ESL
LLp Series
82pF
High-Q Type
GJM Series
1mm
250Vdc C0G
0.5pF
Part Number
±0.1pF GQM2195C2ER50BB12#
T
max.
Rated
TC
Voltage Code
Cap.
1mm
250Vdc C0G
3.0pF
3.3pF
High Frequency
GQM Series
±0.1pF GQM2195C2ER75BB12#
3.6pF
±0.1pF GQM2195C2E1R0BB12#
3.9pF
±0.1pF GQM2195C2E1R1BB12#
4.0pF
Monolithic Microchip
GMA Series
±0.1pF GQM2195C2E1R2BB12#
4.3pF
±0.1pF GQM2195C2E1R3BB12#
±0.1pF GQM2195C2E1R5BB12#
5.0pF
±0.1pF GQM2195C2E1R6BB12#
For Bonding
GMD Series
±0.1pF GQM2195C2E1R8BB12#
±0.1pF GQM2195C2E2R0BB12#
5.6pF
±0.25pF GQM2195C2E5R6CB12#
6.0pF
±0.25pF GQM2195C2E6R0CB12#
±0.5pF GQM2195C2E5R1DB12#
±0.5pF GQM2195C2E5R6DB12#
±0.5pF GQM2195C2E6R0DB12#
6.2pF
±0.25pF GQM2195C2E6R2CB12#
6.8pF
±0.25pF GQM2195C2E6R8CB12#
7.0pF
±0.25pF GQM2195C2E7R0CB12#
7.5pF
±0.25pF GQM2195C2E7R5CB12#
8.0pF
±0.25pF GQM2195C2E8R0CB12#
±0.5pF GQM2195C2E6R2DB12#
±0.5pF GQM2195C2E6R8DB12#
±0.5pF GQM2195C2E7R0DB12#
±0.5pF GQM2195C2E7R5DB12#
±0.5pF GQM2195C2E8R0DB12#
8.2pF
±0.25pF GQM2195C2E8R2CB12#
9.0pF
±0.25pF GQM2195C2E9R0CB12#
9.1pF
±0.25pF GQM2195C2E9R1CB12#
±0.5pF GQM2195C2E8R2DB12#
±0.5pF GQM2195C2E9R0DB12#
±0.5pF GQM2195C2E9R1DB12#
±2%
GQM2195C2E100GB12#
±5%
GQM2195C2E100JB12#
±2%
GQM2195C2E110GB12#
±5%
GQM2195C2E110JB12#
12pF
±2%
GQM2195C2E120GB12#
±5%
GQM2195C2E120JB12#
13pF
±2%
GQM2195C2E130GB12#
±5%
GQM2195C2E130JB12#
±2%
GQM2195C2E150GB12#
±5%
GQM2195C2E150JB12#
±2%
GQM2195C2E160GB12#
±5%
GQM2195C2E160JB12#
±2%
GQM2195C2E180GB12#
±5%
GQM2195C2E180JB12#
±2%
GQM2195C2E200GB12#
±5%
GQM2195C2E200JB12#
±2%
GQM2195C2E220GB12#
10pF
11pF
15pF
±0.25pF GQM2195C2E2R0CB12#
2.2pF
±0.1pF GQM2195C2E2R2BB12#
16pF
Product Information
±0.25pF GQM2195C2E2R2CB12#
2.4pF
±0.1pF GQM2195C2E2R4BB12#
18pF
±0.25pF GQM2195C2E2R4CB12#
2.7pF
±0.1pF GQM2195C2E2R7BB12#
20pF
±0.25pF GQM2195C2E2R7CB12#
3.0pF
±0.1pF GQM2195C2E3R0BB12#
±0.1pF GQM2195C2E5R0BB12#
±0.25pF GQM2195C2E5R1CB12#
±0.25pF GQM2195C2E1R8CB12#
2.0pF
±0.1pF GQM2195C2E4R7BB12#
5.1pF
±0.25pF GQM2195C2E1R6CB12#
1.8pF
±0.1pF GQM2195C2E4R3BB12#
±0.25pF GQM2195C2E5R0CB12#
±0.25pF GQM2195C2E1R5CB12#
1.6pF
±0.1pF GQM2195C2E4R0BB12#
±0.25pF GQM2195C2E4R7CB12#
±0.25pF GQM2195C2E1R3CB12#
1.5pF
±0.1pF GQM2195C2E3R9BB12#
±0.25pF GQM2195C2E4R3CB12#
4.7pF
±0.25pF GQM2195C2E1R2CB12#
1.3pF
±0.1pF GQM2195C2E3R6BB12#
±0.25pF GQM2195C2E4R0CB12#
±0.25pF GQM2195C2E1R1CB12#
1.2pF
±0.1pF GQM2195C2E3R3BB12#
±0.25pF GQM2195C2E3R9CB12#
±0.25pF GQM2195C2E1R0CB12#
1.1pF
±0.25pF GQM2195C2E3R0CB12#
±0.25pF GQM2195C2E3R6CB12#
±0.25pF GQM2195C2ER75CB12#
1.0pF
Part Number
±0.25pF GQM2195C2E3R3CB12#
±0.25pF GQM2195C2ER50CB12#
0.75pF
Tol.
22pF
Part number # indicates the package specification code.
110
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Temperature Compensating Type
HiQ
Oct.1,2012
Part Number List
(→ c 2.0×1.25mm)
250Vdc C0G
22pF
±5%
GQM2195C2E220JB12#
24pF
±2%
GQM2195C2E240GB12#
±5%
GQM2195C2E240JB12#
27pF
±2%
GQM2195C2E270GB12#
±5%
GQM2195C2E270JB12#
±2%
GQM2195C2E300GB12#
±5%
GQM2195C2E300JB12#
33pF
±2%
GQM2195C2E330GB12#
±5%
GQM2195C2E330JB12#
36pF
±2%
GQM2195C2E360GB12#
±5%
GQM2195C2E360JB12#
39pF
±2%
GQM2195C2E390GB12#
±5%
GQM2195C2E390JB12#
43pF
±2%
GQM2195C2E430GB12#
±5%
GQM2195C2E430JB12#
47pF
±2%
GQM2195C2E470GB12#
±5%
GQM2195C2E470JB12#
51pF
±2%
GQM2195C2E510GB12#
±5%
GQM2195C2E510JB12#
56pF
±2%
GQM2195C2E560GB12#
±5%
GQM2195C2E560JB12#
±2%
GQM2195C2E620GB12#
±5%
GQM2195C2E620JB12#
68pF
±2%
GQM2195C2E680GB12#
±5%
GQM2195C2E680JB12#
75pF
±2%
GQM2195C2E750GB12#
±5%
GQM2195C2E750JB12#
82pF
±2%
GQM2195C2E820GB12#
±5%
GQM2195C2E820JB12#
±2%
GQM2195C2E910GB12#
±5%
GQM2195C2E910JB12#
±2%
GQM2195C2E101GB12#
±5%
GQM2195C2E101JB12#
30pF
62pF
91pF
100pF
T
max.
Rated
TC
Voltage Code
Cap.
1.35mm 500Vdc C0G
1.8pF
Tol.
Part Number
±0.1pF GQM22M5C2H1R8BB01#
For General Purpose
GRM Series
1mm
Part Number
±0.25pF GQM22M5C2H1R8CB01#
2.0pF
±0.1pF GQM22M5C2H2R0BB01#
±0.25pF GQM22M5C2H2R0CB01#
2.2pF
±0.1pF GQM22M5C2H2R2BB01#
±0.25pF GQM22M5C2H2R2CB01#
2.4pF
±0.1pF GQM22M5C2H2R4BB01#
±0.25pF GQM22M5C2H2R4CB01#
2.7pF
Capacitor Array
GNM Series
Tol.
±0.1pF GQM22M5C2H2R7BB01#
±0.25pF GQM22M5C2H2R7CB01#
3.0pF
±0.1pF GQM22M5C2H3R0BB01#
±0.25pF GQM22M5C2H3R0CB01#
3.3pF
±0.1pF GQM22M5C2H3R3BB01#
±0.25pF GQM22M5C2H3R3CB01#
3.6pF
±0.1pF GQM22M5C2H3R6BB01#
Low ESL
LLp Series
Cap.
±0.25pF GQM22M5C2H3R6CB01#
3.9pF
±0.1pF GQM22M5C2H3R9BB01#
±0.25pF GQM22M5C2H3R9CB01#
4.0pF
±0.1pF GQM22M5C2H4R0BB01#
±0.25pF GQM22M5C2H4R0CB01#
4.3pF
±0.1pF GQM22M5C2H4R3BB01#
±0.25pF GQM22M5C2H4R3CB01#
4.7pF
High-Q Type
GJM Series
Rated
TC
Voltage Code
±0.1pF GQM22M5C2H4R7BB01#
±0.25pF GQM22M5C2H4R7CB01#
5.0pF
±0.1pF GQM22M5C2H5R0BB01#
±0.25pF GQM22M5C2H5R0CB01#
5.1pF
±0.25pF GQM22M5C2H5R1CB01#
5.6pF
±0.25pF GQM22M5C2H5R6CB01#
6.0pF
±0.25pF GQM22M5C2H6R0CB01#
6.2pF
±0.25pF GQM22M5C2H6R2CB01#
6.8pF
±0.25pF GQM22M5C2H6R8CB01#
7.0pF
±0.25pF GQM22M5C2H7R0CB01#
7.5pF
±0.25pF GQM22M5C2H7R5CB01#
8.0pF
±0.25pF GQM22M5C2H8R0CB01#
±0.5pF GQM22M5C2H5R1DB01#
High Frequency
GQM Series
T
max.
±0.5pF GQM22M5C2H5R6DB01#
±0.5pF GQM22M5C2H6R0DB01#
c 2.8×2.8mm
±0.5pF GQM22M5C2H6R8DB01#
Rated
TC
Voltage Code
Cap.
1.35mm 500Vdc C0G
0.5pF
Tol.
Part Number
±0.5pF GQM22M5C2H7R0DB01#
±0.25pF GQM22M5C2HR50CB01#
0.75pF
±0.1pF GQM22M5C2HR75BB01#
±0.5pF GQM22M5C2H7R5DB01#
±0.25pF GQM22M5C2HR75CB01#
1.0pF
±0.1pF GQM22M5C2H1R0BB01#
±0.5pF GQM22M5C2H8R0DB01#
8.2pF
±0.25pF GQM22M5C2H8R2CB01#
9.0pF
±0.25pF GQM22M5C2H9R0CB01#
9.1pF
±0.25pF GQM22M5C2H9R1CB01#
±0.25pF GQM22M5C2H1R0CB01#
1.1pF
±0.1pF GQM22M5C2H1R1BB01#
±0.5pF GQM22M5C2H8R2DB01#
±0.25pF GQM22M5C2H1R1CB01#
1.2pF
±0.1pF GQM22M5C2H1R2BB01#
±0.5pF GQM22M5C2H9R0DB01#
±0.25pF GQM22M5C2H1R2CB01#
1.3pF
±0.1pF GQM22M5C2H1R3BB01#
±0.5pF GQM22M5C2H9R1DB01#
10pF
±0.25pF GQM22M5C2H1R3CB01#
1.5pF
±0.1pF GQM22M5C2H1R5BB01#
11pF
±0.25pF GQM22M5C2H1R5CB01#
1.6pF
±0.1pF GQM22M5C2H1R6BB01#
±0.25pF GQM22M5C2H1R6CB01#
For Bonding
GMD Series
±0.1pF GQM22M5C2HR50BB01#
12pF
±2%
GQM22M5C2H100GB01#
±5%
GQM22M5C2H100JB01#
±2%
GQM22M5C2H110GB01#
±5%
GQM22M5C2H110JB01#
±2%
GQM22M5C2H120GB01#
±5%
GQM22M5C2H120JB01#
Product Information
T
max.
Monolithic Microchip
GMA Series
±0.5pF GQM22M5C2H6R2DB01#
Part number # indicates the package specification code.
111
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
GQM Series Temperature Compensating Type
HiQ
C02E.pdf
Oct.1,2012
Part Number List
(→ c 2.8×2.8mm)
T
max.
For General Purpose
GRM Series
Rated
TC
Voltage Code
Cap.
Tol.
Part Number
1.35mm 500Vdc C0G
13pF
±2%
GQM22M5C2H130GB01#
±5%
GQM22M5C2H130JB01#
±2%
GQM22M5C2H150GB01#
±5%
GQM22M5C2H150JB01#
16pF
±2%
GQM22M5C2H160GB01#
±5%
GQM22M5C2H160JB01#
18pF
±2%
GQM22M5C2H180GB01#
±5%
GQM22M5C2H180JB01#
±2%
GQM22M5C2H200GB01#
±5%
GQM22M5C2H200JB01#
±2%
GQM22M5C2H220GB01#
±5%
GQM22M5C2H220JB01#
±2%
GQM22M5C2H240GB01#
±5%
GQM22M5C2H240JB01#
±2%
GQM22M5C2H270GB01#
±5%
GQM22M5C2H270JB01#
±2%
GQM22M5C2H300GB01#
±5%
GQM22M5C2H300JB01#
±2%
GQM22M5C2H330GB01#
±5%
GQM22M5C2H330JB01#
36pF
±2%
GQM22M5C2H360GB01#
±5%
GQM22M5C2H360JB01#
39pF
±2%
GQM22M5C2H390GB01#
±5%
GQM22M5C2H390JB01#
±2%
GQM22M5C2H430GB01#
±5%
GQM22M5C2H430JB01#
±2%
GQM22M5C2H470GB01#
±5%
GQM22M5C2H470JB01#
±2%
GQM22M5C2H510GB01#
±5%
GQM22M5C2H510JB01#
56pF
±2%
GQM22M5C2H560GB01#
±5%
GQM22M5C2H560JB01#
62pF
±2%
GQM22M5C2H620GB01#
±5%
GQM22M5C2H620JB01#
±2%
GQM22M5C2H680GB01#
±5%
GQM22M5C2H680JB01#
75pF
±2%
GQM22M5C2H750GB01#
±5%
GQM22M5C2H750JB01#
82pF
±2%
GQM22M5C2H820GB01#
±5%
GQM22M5C2H820JB01#
±2%
GQM22M5C2H910GB01#
±5%
GQM22M5C2H910JB01#
±2%
GQM22M5C2H101GB01#
±5%
GQM22M5C2H101JB01#
15pF
Capacitor Array
GNM Series
20pF
22pF
24pF
27pF
Low ESL
LLp Series
30pF
33pF
High-Q Type
GJM Series
43pF
47pF
High Frequency
GQM Series
51pF
Monolithic Microchip
GMA Series
68pF
91pF
For Bonding
GMD Series
100pF
Product Information
Part number # indicates the package specification code.
112
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
For General Purpose
GRM Series
Monolithic Microchip GMA Series
Capacitor for wire bonding. Can also be mounted directly to a frame!!
T
Capacitor Array
GNM Series
W
L
1 Excellent high frequency characteristics.
2 Ideal for bypass applications.
Product Information
For Bonding
GMD Series
Monolithic Microchip
GMA Series
High Frequency
GQM Series
High-Q Type
GJM Series
Low ESL
LLp Series
3 High density mounting is possible.
113
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GMA Series High Dielectric Constant Type Part Number List
c 0.38×0.38mm
For General Purpose
GRM Series
T
max.
Rated
TC
Voltage Code
0.35mm 10Vdc
Cap.
X7R 10000pF
R
T
max.
Ultracompact
10000pF
Tol.
Part Number
0.6mm
Rated
TC
Voltage Code
10Vdc
Capacitor Array
GNM Series
T
max.
±20%
GMA085R71A333MA01#
±20%
GMA085R71A473MA01#
±20%
GMA0D3R71A103MA01#
68000pF
±20%
GMA085R71A683MA01#
±20%
GMA0D3R11A103MA01#
0.1µF
±20%
GMA085R71A104MA01#
33000pF
±20%
GMA085R11A333MA01#
47000pF
±20%
GMA085R11A473MA01#
68000pF
±20%
GMA085R11A683MA01#
0.1µF
±20%
GMA085R11A104MA01#
33000pF
±20%
GMA085B11A333MA01#
B
GMA05XR72A101MA01#
47000pF
±20%
GMA085B11A473MA01#
150pF
±20%
GMA05XR72A151MA01#
68000pF
±20%
GMA085B11A683MA01#
220pF
±20%
GMA05XR72A221MA01#
0.1µF
±20%
GMA085B11A104MA01#
330pF
±20%
GMA05XR72A331MA01#
X5R
0.47µF
±20%
GMA085R60J474ME12#
470pF
±20%
GMA05XR72A471MA01#
B
0.47µF
±20%
GMA085B30J474ME12#
680pF
±20%
GMA05XR72A681MA01#
1000pF
±20%
GMA05XR72A102MA01#
1500pF
±20%
GMA05XR71E152MA11#
2200pF
±20%
GMA05XR71E222MA11#
3300pF
±20%
GMA05XR71E332MA11#
4700pF
±20%
GMA05XR71E472MA11#
1500pF
±20%
GMA05XB31E152MA11#
2200pF
±20%
GMA05XB31E222MA11#
3300pF
±20%
GMA05XB31E332MA11#
4700pF
±20%
GMA05XB31E472MA11#
6800pF
±20%
GMA05XR71A682MA01#
10000pF
±20%
GMA05XR71A103MA01#
15000pF
±20%
GMA05XR71A153MA01#
22000pF
±20%
GMA05XR71A223MA01#
6800pF
±20%
GMA05XR11A682MA01#
10000pF
±20%
GMA05XR11A103MA01#
15000pF
±20%
GMA05XR11A153MA01#
22000pF
±20%
GMA05XR11A223MA01#
6800pF
±20%
GMA05XB11A682MA01#
10000pF
±20%
GMA05XB11A103MA01#
15000pF
±20%
GMA05XB11A153MA01#
22000pF
±20%
GMA05XB11A223MA01#
X5R
0.1µF
±20%
GMA05XR60J104ME12#
B
0.1µF
±20%
GMA05XB30J104ME12#
Cap.
Tol.
1500pF
±20%
GMA085R72A152MA01#
2200pF
±20%
GMA085R72A222MA01#
3300pF
±20%
GMA085R72A332MA01#
4700pF
±20%
GMA085R72A472MA01#
Low ESL
LLp Series
X7R
High-Q Type
GJM Series
X7R
High Frequency
GQM Series
R
B
Monolithic Microchip
GMA Series
6.3Vdc
Part Number
±20%
B
10Vdc
Tol.
100pF
0.4mm 100Vdc X7R
25Vdc
Cap.
Part Number
47000pF
Ultracompact
Rated
TC
Voltage Code
Tol.
X7R 33000pF
R
c 0.5×0.5mm
Cap.
6.3Vdc
c 0.8×0.8mm
For Bonding
GMD Series
T
max.
Rated
TC
Voltage Code
0.6mm 100Vdc X7R
Product Information
25Vdc
Part Number
6800pF
±20%
GMA085R72A682MA01#
X7R 10000pF
±20%
GMA085R71E103MA11#
15000pF
±20%
GMA085R71E153MA11#
22000pF
±20%
GMA085R71E223MA11#
10000pF
±20%
GMA085B31E103MA11#
15000pF
±20%
GMA085B31E153MA11#
22000pF
±20%
GMA085B31E223MA11#
B
Part number # indicates the package specification code.
114
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Oct.1,2012
Chip Monolithic Ceramic Capacitors
For General Purpose
GRM Series
For Bonding GMD Series
Capacitor for wire bonding. Compatible up to 0.6x0.3mm size!!
e
g
e
Capacitor Array
GNM Series
T
W
L
1 Compact product sizes of 0.6x0.3x0.3mm, 1.0x0.5x0.5mm
2 Can be mounted by wire bonding and AuSn soldering.
Product Information
For Bonding
GMD Series
Monolithic Microchip
GMA Series
High Frequency
GQM Series
High-Q Type
GJM Series
Low ESL
LLp Series
3 Ideal for mounting in optical communication related devices and IC packages.
115
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GMD Series High Dielectric Constant Type Part Number List
c 0.6×0.3mm
For General Purpose
GRM Series
T
max.
Rated
TC
Voltage Code
0.33mm 25Vdc
X7R
Capacitor Array
GNM Series
Low ESL
LLp Series
R
High-Q Type
GJM Series
High Frequency
GQM Series
B
Monolithic Microchip
GMA Series
For Bonding
GMD Series
16Vdc
T
max.
Ultracompact
X7R
Product Information
R
Cap.
Tol.
Part Number
Rated
TC
Voltage Code
0.33mm 16Vdc
Cap.
Tol.
Part Number
R
3300pF
±10%
GMD033R11C332KA11#
B
1800pF
±10%
GMD033B31C182KA11#
100pF
±10%
GMD033R71E101KA01#
2200pF
±10%
GMD033B31C222KA11#
120pF
±10%
GMD033R71E121KA01#
2700pF
±10%
GMD033B31C272KA11#
150pF
±10%
GMD033R71E151KA01#
3300pF
±10%
GMD033B31C332KA11#
180pF
±10%
GMD033R71E181KA01#
3900pF
±10%
GMD033R71A392KA01#
220pF
±10%
GMD033R71E221KA01#
4700pF
±10%
GMD033R71A472KA01#
270pF
±10%
GMD033R71E271KA01#
5600pF
±10%
GMD033R71A562KA01#
330pF
±10%
GMD033R71E331KA01#
6800pF
±10%
GMD033R71A682KA01#
390pF
±10%
GMD033R71E391KA01#
8200pF
±10%
GMD033R71A822KA01#
470pF
±10%
GMD033R71E471KA01#
10000pF
±10%
GMD033R71A103KA01#
560pF
±10%
GMD033R71E561KA01#
3900pF
±10%
GMD033R11A392KA01#
680pF
±10%
GMD033R71E681KA01#
4700pF
±10%
GMD033R11A472KA01#
820pF
±10%
GMD033R71E821KA01#
5600pF
±10%
GMD033R11A562KA01#
1000pF
±10%
GMD033R71E102KA01#
6800pF
±10%
GMD033R11A682KA01#
1200pF
±10%
GMD033R71E122KA01#
8200pF
±10%
GMD033R11A822KA01#
1500pF
±10%
GMD033R71E152KA01#
10000pF
±10%
GMD033R11A103KA01#
100pF
±10%
GMD033R11E101KA01#
3900pF
±10%
GMD033B11A392KA01#
120pF
±10%
GMD033R11E121KA01#
4700pF
±10%
GMD033B11A472KA01#
150pF
±10%
GMD033R11E151KA01#
5600pF
±10%
GMD033B11A562KA01#
180pF
±10%
GMD033R11E181KA01#
6800pF
±10%
GMD033B11A682KA01#
220pF
±10%
GMD033R11E221KA01#
8200pF
±10%
GMD033B11A822KA01#
270pF
±10%
GMD033R11E271KA01#
10000pF
±10%
GMD033B11A103KA01#
330pF
±10%
GMD033R11E331KA01#
X5R 56000pF
±10%
GMD033R60J563KE11#
390pF
±10%
GMD033R11E391KA01#
68000pF
±10%
GMD033R60J683KE11#
470pF
±10%
GMD033R11E471KA01#
82000pF
±10%
GMD033R60J823KE11#
560pF
±10%
GMD033R11E561KA01#
680pF
±10%
GMD033R11E681KA01#
820pF
±10%
1000pF
10Vdc
X7R
R
B
6.3Vdc
0.1µF
±10%
GMD033R60J104KE11#
56000pF
±10%
GMD033B30J563KE11#
GMD033R11E821KA01#
68000pF
±10%
GMD033B30J683KE11#
±10%
GMD033R11E102KA01#
82000pF
±10%
GMD033B30J823KE11#
1200pF
±10%
GMD033R11E122KA01#
0.1µF
±10%
GMD033B30J104KE11#
1500pF
±10%
GMD033R11E152KA01#
100pF
±10%
GMD033B11E101KA01#
120pF
±10%
GMD033B11E121KA01#
150pF
±10%
GMD033B11E151KA01#
Cap.
Tol.
180pF
±10%
GMD033B11E181KA01#
220pF
±10%
GMD033B11E221KA01#
220pF
±10%
GMD155R71H221KA01#
270pF
±10%
GMD033B11E271KA01#
270pF
±10%
GMD155R71H271KA01#
330pF
±10%
GMD033B11E331KA01#
330pF
±10%
GMD155R71H331KA01#
390pF
±10%
GMD033B11E391KA01#
390pF
±10%
GMD155R71H391KA01#
470pF
±10%
GMD033B11E471KA01#
470pF
±10%
GMD155R71H471KA01#
560pF
±10%
GMD033B11E561KA01#
560pF
±10%
GMD155R71H561KA01#
680pF
±10%
GMD033B11E681KA01#
680pF
±10%
GMD155R71H681KA01#
820pF
±10%
GMD033B11E821KA01#
820pF
±10%
GMD155R71H821KA01#
1000pF
±10%
GMD033B11E102KA01#
1000pF
±10%
GMD155R71H102KA01#
1200pF
±10%
GMD033B11E122KA01#
1200pF
±10%
GMD155R71H122KA01#
1500pF
±10%
GMD033B11E152KA01#
1500pF
±10%
GMD155R71H152KA01#
1800pF
±10%
GMD033R71C182KA11#
1800pF
±10%
GMD155R71H182KA01#
2200pF
±10%
GMD033R71C222KA11#
2200pF
±10%
GMD155R71H222KA01#
2700pF
±10%
GMD033R71C272KA11#
2700pF
±10%
GMD155R71H272KA01#
3300pF
±10%
GMD033R71C332KA11#
3300pF
±10%
GMD155R71H332KA01#
1800pF
±10%
GMD033R11C182KA11#
3900pF
±10%
GMD155R71H392KA01#
2200pF
±10%
GMD033R11C222KA11#
4700pF
±10%
GMD155R71H472KA01#
2700pF
±10%
GMD033R11C272KA11#
220pF
±10%
GMD155R11H221KA01#
B
c 1.0×0.5mm
T
max.
Rated
TC
Voltage Code
0.55mm 50Vdc
X7R
R
Part Number
Part number # indicates the package specification code.
116
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GMD Series High Dielectric Constant Type Part Number List
(→ c 1.0×0.5mm)
25Vdc
X7R
R
Tol.
GMD155R11H271KA01#
±10%
GMD155R11H331KA01#
33000pF
±10%
GMD155R11E333KA11#
39000pF
±10%
390pF
±10%
GMD155R11H391KA01#
GMD155R11E393KA11#
47000pF
±10%
470pF
±10%
GMD155R11H471KA01#
GMD155R11E473KA11#
5600pF
±10%
560pF
±10%
GMD155R11H561KA01#
GMD155B11E562KA01#
6800pF
±10%
GMD155B11E682KA01#
680pF
±10%
820pF
±10%
GMD155R11H681KA01#
8200pF
±10%
GMD155B11E822KA01#
GMD155R11H821KA01#
10000pF
±10%
1000pF
GMD155B11E103KA01#
±10%
GMD155R11H102KA01#
12000pF
±10%
GMD155B11E123KA01#
1200pF
±10%
GMD155R11H122KA01#
15000pF
±10%
GMD155B11E153KA01#
1500pF
±10%
GMD155R11H152KA01#
18000pF
±10%
GMD155B11E183KA01#
1800pF
±10%
GMD155R11H182KA01#
22000pF
±10%
GMD155B11E223KA01#
2200pF
±10%
GMD155R11H222KA01#
27000pF
±10%
GMD155B31E273KA11#
2700pF
±10%
GMD155R11H272KA01#
33000pF
±10%
GMD155B31E333KA11#
3300pF
±10%
GMD155R11H332KA01#
39000pF
±10%
GMD155B31E393KA11#
3900pF
±10%
GMD155R11H392KA01#
47000pF
±10%
GMD155B31E473KA11#
4700pF
±10%
GMD155R11H472KA01#
X7R 56000pF
±10%
GMD155R71C563KA11#
220pF
±10%
GMD155B11H221KA01#
68000pF
±10%
GMD155R71C683KA11#
270pF
±10%
GMD155B11H271KA01#
82000pF
±10%
GMD155R71C823KA11#
330pF
±10%
GMD155B11H331KA01#
0.1µF
±10%
GMD155R71C104KA11#
390pF
±10%
GMD155B11H391KA01#
56000pF
±10%
GMD155R11C563KA11#
470pF
±10%
GMD155B11H471KA01#
68000pF
±10%
GMD155R11C683KA11#
560pF
±10%
GMD155B11H561KA01#
82000pF
±10%
GMD155R11C823KA11#
680pF
±10%
GMD155B11H681KA01#
0.1µF
±10%
GMD155R11C104KA11#
820pF
±10%
GMD155B11H821KA01#
56000pF
±10%
GMD155B31C563KA11#
1000pF
±10%
GMD155B11H102KA01#
68000pF
±10%
GMD155B31C683KA11#
1200pF
±10%
GMD155B11H122KA01#
82000pF
±10%
GMD155B31C823KA11#
1500pF
±10%
GMD155B11H152KA01#
1800pF
±10%
GMD155B11H182KA01#
2200pF
±10%
2700pF
0.55mm 25Vdc
R
B
16Vdc
R
B
Part Number
0.1µF
±10%
GMD155B31C104KA11#
0.12µF
±10%
GMD155R61A124KE12#
GMD155B11H222KA01#
0.15µF
±10%
GMD155R61A154KE12#
±10%
GMD155B11H272KA01#
0.18µF
±10%
GMD155R61A184KE12#
3300pF
±10%
GMD155B11H332KA01#
0.22µF
±10%
GMD155R61A224KE12#
3900pF
±10%
GMD155B11H392KA01#
0.27µF
±10%
GMD155R61A274KE11#
4700pF
±10%
GMD155B11H472KA01#
0.33µF
±10%
GMD155R61A334KE11#
5600pF
±10%
GMD155R71E562KA01#
0.39µF
±10%
GMD155R61A394KE11#
6800pF
±10%
GMD155R71E682KA01#
0.47µF
±10%
GMD155R61A474KE11#
8200pF
±10%
GMD155R71E822KA01#
0.12µF
±10%
GMD155B31A124KE12#
10000pF
±10%
GMD155R71E103KA01#
0.15µF
±10%
GMD155B31A154KE12#
12000pF
±10%
GMD155R71E123KA01#
0.18µF
±10%
GMD155B31A184KE12#
15000pF
±10%
GMD155R71E153KA01#
0.22µF
±10%
GMD155B31A224KE12#
18000pF
±10%
GMD155R71E183KA01#
0.27µF
±10%
GMD155B31A274KE11#
22000pF
±10%
GMD155R71E223KA01#
0.33µF
±10%
GMD155B31A334KE11#
27000pF
±10%
GMD155R71E273KA11#
0.39µF
±10%
GMD155B31A394KE11#
33000pF
±10%
GMD155R71E333KA11#
0.47µF
±10%
GMD155B31A474KE11#
39000pF
±10%
GMD155R71E393KA11#
47000pF
±10%
GMD155R71E473KA11#
5600pF
±10%
GMD155R11E562KA01#
6800pF
±10%
GMD155R11E682KA01#
8200pF
±10%
GMD155R11E822KA01#
10000pF
±10%
GMD155R11E103KA01#
12000pF
±10%
GMD155R11E123KA01#
15000pF
±10%
GMD155R11E153KA01#
18000pF
±10%
GMD155R11E183KA01#
22000pF
±10%
GMD155R11E223KA01#
27000pF
±10%
GMD155R11E273KA11#
10Vdc
X5R
B
For General Purpose
GRM Series
Cap.
Capacitor Array
GNM Series
±10%
330pF
Rated
TC
Voltage Code
Low ESL
LLp Series
270pF
T
max.
High-Q Type
GJM Series
B
Part Number
High Frequency
GQM Series
R
Tol.
Monolithic Microchip
GMA Series
0.55mm 50Vdc
Cap.
For Bonding
GMD Series
Rated
TC
Voltage Code
Product Information
T
max.
Part number # indicates the package specification code.
117
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution/Notice
For General
!Caution
For General Purpose
GRM Series
c Storage and Operation Conditions ........................ 119
Notice
c Rating .................................................................... 129
1. Operating Temperature ..................................... 129
c Rating .................................................................... 119
2. Atmosphere Surroundings ................................. 129
1. Temperature Dependent Characteristics........... 119
3. Piezo-electric Phenomenon............................... 129
Capacitor Array
GNM Series
2. Measurement of Capacitance............................ 120
3. Applied Voltage ................................................. 120
c Soldering and Mounting ........................................ 129
4. Applied Voltage and
Self-heating Temperature .................................. 120
1. PCB Design ....................................................... 129
5. DC Voltage and AC Voltage Characteristic ....... 121
6. Capacitance Aging ............................................ 121
Low ESL
LLp Series
7. Vibration and Shock .......................................... 122
c Soldering and Mounting ........................................ 122
1. Mounting Position .............................................. 122
2. Information before Mounting.............................. 123
High-Q Type
GJM Series
3. Maintenance of the Mounting (pick and place)
Machine ............................................................. 123
4-1. Reflow Soldering ............................................ 124
4-2. Flow Soldering................................................ 125
High Frequency
GQM Series
4-3. Correction with a Soldering Iron ..................... 126
4-4. Leaded Component Insertion ......................... 126
5. Washing............................................................. 126
6. Electrical Test on Printed Circuit Board ............. 127
7. Printed Circuit Board Cropping .......................... 127
Monolithic Microchip
GMA Series
c Others.................................................................... 128
1. Under Operation of Equipment .......................... 128
2. Others ................................................................ 128
For Bonding
GMD Series
Product Information
!Caution/Notice
118
1. Notice for Pattern Forms ............................... 129
2. Land Dimensions ........................................... 130
2. Adhesive Application ......................................... 131
3. Adhesive Curing ................................................ 132
4. Flux Application ................................................. 132
5. Flow Soldering ................................................... 132
6. Washing............................................................. 132
7. Coating .............................................................. 133
8. Die Bonding/Wire Bonding
(GMA or GMD Series) ....................................... 133
c Others.................................................................... 133
1. Transportation ................................................... 133
C02E.pdf
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
1. Temperature Dependent Characteristics
1. The electrical characteristics of the capacitor can change
with temperature.
1-1. For capacitors having larger temperature
dependency, the capacitance may change with
temperature changes.
The following actions are recommended in order to
ensure suitable capacitance values.
(1) Select a suitable capacitance for the operating
temperature range.
20
15
15
Capacitance Change (%)
20
10
5
0
-5
-10
-15
-20
-75
-50
-25
0
25
50
75
100
Temperature (°C)
10
5
0
-5
-10
-15
-20
-75
-50
-25
0
25
50
75
100
125
150
Temperature (°C)
For Bonding
GMD Series
Typical Temperature Characteristics F5(Y5V)
40
20
0
-20
Product Information
!Caution
Capacitance Change (%)
Capacitor Array
GNM Series
High Frequency
GQM Series
Typical Temperature Characteristics R7(X7R)
Typical Temperature Characteristics R6(X5R)
Capacitance Change (%)
(2) The capacitance may change within the rated
temperature.
When you use a high dielectric constant type
capacitor in a circuit that needs a tight (narrow)
capacitance tolerance (e.g., a time-constant
circuit), please carefully consider the
characteristics of these capacitors, such as their
aging, voltage, and temperature characteristics.
In addition, check capacitors using your actual
appliances at the intended environment and
operating conditions.
Low ESL
LLp Series
c Rating
High-Q Type
GJM Series
1-2. Corrosive gas can react with the termination
(external) electrodes or lead wires of capacitors, and
result in poor solderability. Do not store the
capacitors in an atmosphere consisting of corrosive
gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine,
ammonia gas, etc.).
1-3. Due to moisture condensation caused by rapid
humidity changes, or the photochemical change
caused by direct sunlight on the terminal electrodes
and/or the resin/epoxy coatings, the solderability and
electrical performance may deteriorate. Do not store
capacitors under direct sunlight or in high humidity
conditions.
Monolithic Microchip
GMA Series
1. The performance of chip monolithic ceramic capacitors
may be affected by the storage conditions.
1-1. Store capacitors in the following conditions:
Temperature of +5°C to +40°C and a Relative
Humidity of 20% to 70%.
(1) Sunlight, dust, rapid temperature changes,
corrosive gas atmosphere or high temperature
and humidity conditions during storage may affect
solderability and packaging performance.
Please use product within six months of receipt.
(2) Please confirm solderability before using after six
months. Store the capacitors without opening the
original bag. Even if the storage period is short, do
not exceed the specified atmospheric conditions.
For General Purpose
GRM Series
c Storage and Operation Conditions
-40
-60
-80
-100
-50
-25
0
25
50
75
100
Temperature (°C)
Continued on the following page.
119
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
Continued from the preceding page.
For General Purpose
GRM Series
2. Measurement of Capacitance
1. Measure capacitance with the voltage and the frequency
specified in the product specifications.
1-1. The output voltage of the measuring equipment may
decrease occasionally when capacitance is high.
Please confirm whether a prescribed measured
voltage is impressed to the capacitor.
1-2. The capacitance values of high dielectric constant
type capacitors change depending on the AC voltage
applied. Please consider the AC voltage
characteristics when selecting a capacitor to be used
in an AC circuit.
Capacitor Array
GNM Series
Low ESL
LLp Series
3. Applied Voltage
1. Do not apply a voltage to the capacitor that exceeds the
rated voltage as called out in the specifications.
1-1. Applied voltage between the terminals of a capacitor
shall be less than or equal to the rated voltage.
(1) When AC voltage is superimposed on DC voltage,
the zero-to-peak voltage shall not exceed the
rated DC voltage.
When AC voltage or pulse voltage is applied, the
peak-to-peak voltage shall not exceed the rated
DC voltage.
(2) Abnormal voltages (surge voltage, static
electricity, pulse voltage, etc.) shall not exceed
the rated DC voltage.
High-Q Type
GJM Series
Typical Voltage Applied to the DC Capacitor
DC Voltage
E
DC Voltage+AC
E
AC Voltage
E
Pulse Voltage
0
E
0
High Frequency
GQM Series
0
0
(E: Maximum possible applied voltage.)
Monolithic Microchip
GMA Series
1-2. Influence of overvoltage
Overvoltage that is applied to the capacitor may
result in an electrical short circuit caused by the
breakdown of the internal dielectric layers.
The time duration until breakdown depends on the
applied voltage and the ambient temperature.
For Bonding
GMD Series
Product Information
!Caution
4. Applied Voltage and Self-heating Temperature
1. When the capacitor is used in a high-frequency voltage,
pulse voltage, application, be sure to take into account
self-heating may be caused by resistant factors of the
capacitor.
1-1. The load should be contained to the level such that
when measuring at atmospheric temperature of 25°C,
the product's self-heating remains below 20°C and
surface temperature of the capacitor in the actual
circuit remains within the maximum operating
temperature.
Continued on the following page.
120
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
Continued from the preceding page.
For General Purpose
GRM Series
[DC Voltage Characteristics]
0
-20
-40
-60
-80
-100
0
1
2
3
4
5
6
7
High-Q Type
GJM Series
Low ESL
LLp Series
DC Voltage (VDC)
[AC Voltage Characteristics]
30
20
10
High Frequency
GQM Series
0
-10
-20
-30
-40
-50
0.5
1.0
1.5
2.0
2.5
Monolithic Microchip
GMA Series
-60
0.0
AC Voltage (Vr.m.s.)
20
For Bonding
GMD Series
10
0
-10
-20
5C
RΔ
-30
-40
10
100
1000
10000
Time (Hr)
Continued on the following page.
121
Product Information
!Caution
Capacitor Change (%)
6. Capacitance Aging
1. The high dielectric constant type capacitors have the
characteristic in which the capacitance value decreases
with the passage of time.
When you use a high dielectric constant type capacitors
in a circuit that needs a tight (narrow) capacitance
tolerance (e.g., a time-constant circuit), please carefully
consider the characteristics of these capacitors, such as
their aging, voltage, and temperature characteristics. In
addition, check capacitors using your actual appliances at
the intended environment and operating conditions.
Capacitor Array
GNM Series
Capacitance Change (%)
20
Capacitance Change (%)
5. DC Voltage and AC Voltage Characteristics
1. The capacitance value of a high dielectric constant type
capacitor changes depending on the DC voltage applied.
Please consider the DC voltage characteristics when a
capacitor is selected for use in a DC circuit.
1-1. The capacitance of ceramic capacitors may change
sharply depending on the applied voltage (see
figure).
Please confirm the following in order to secure the
capacitance.
(1) Determine whether the capacitance change
caused by the applied voltage is within the
allowed range.
(2) In the DC voltage characteristics, the rate of
capacitance change becomes larger as voltage
increases, even if the applied voltage is below
the rated voltage. When a high dielectric constant
type capacitor is in a circuit that needs a tight
(narrow) capacitance tolerance (e.g., a timeconstant circuit), please carefully consider the
characteristics of these capacitors, such as their
aging, voltage, and temperature characteristics.
In addition, check capacitors using your actual
appliances at the intended environment and
operating conditions.
2. The capacitance values of high dielectric constant type
capacitors change depending on the AC voltage applied.
Please consider the AC voltage characteristics when
selecting a capacitor to be used in an AC circuit.
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
Continued from the preceding page.
For General Purpose
GRM Series
Capacitor Array
GNM Series
7. Vibration and Shock
1. Please confirm the kind of vibration and/or shock, its
condition, and any generation of resonance.
Please mount the capacitor so as not to generate
resonance, and do not allow any impact on the terminals.
2. Mechanical shock due to being dropped may cause
damage or a crack in the dielectric material of the
capacitor.
Do not use a dropped capacitor because the quality and
reliability may be deteriorated.
3. When printed circuit boards are piled up or handled, the
corner of another printed circuit board should not be
allowed to hit the capacitor, in order to avoid a crack or
other damage to the capacitor.
Crack
Floor
Mounting printed circuit board
Crack
Low ESL
LLp Series
c Soldering and Mounting
1. Mounting Position
High-Q Type
GJM Series
1. Confirm the best mounting position and direction that
minimizes the stress imposed on the capacitor during
flexing or bending the printed circuit board.
1-1. Choose a mounting position that minimizes the
stress imposed on the chip during flexing or bending
of the board.
[Component Direction]
Locate chip
horizontal to the
direction in
which stress
acts.
[Chip Mounting Close to Board Separation Point]
Perforation
High Frequency
GQM Series
A
C
B
Chip arrangement
Worst A-C-(B~D) Best
D
Slit
Continued on the following page.
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
!Caution
122
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
Continued from the preceding page.
2. Information before Mounting
Low ESL
LLp Series
Capacitor Array
GNM Series
For General Purpose
GRM Series
1. Do not reuse capacitors that were removed from the
equipment.
2. Confirm capacitance characteristics under actual applied
voltage.
3. Confirm the mechanical stress under actual process and
equipment use.
4. Confirm the rated capacitance, rated voltage and other
electrical characteristics before assembly.
5. Prior to use, confirm the solderability of capacitors that
were in long-term storage.
6. Prior to measuring capacitance, carry out a heat
treatment for capacitors that were in long-term storage.
7. The use of Sn-Zn based solder will deteriorate the
reliability of the MLCC.
Please contact our sales representative or product
engineers on the use of Sn-Zn based solder in advance.
3. Maintenance of the Mounting (pick and place) Machine
[Incorrect]
Deflection
High Frequency
GQM Series
Board Guide
[Correct]
Support Pin
For Bonding
GMD Series
Continued on the following page.
Monolithic Microchip
GMA Series
Board
High-Q Type
GJM Series
Suction Nozzle
Product Information
!Caution
1. Make sure that the following excessive forces are not
applied to the capacitors.
1-1. In mounting the capacitors on the printed circuit
board, any bending force against them shall be kept
to a minimum to prevent them from any bending
damage or cracking. Please take into account the
following precautions and recommendations for use
in your process.
(1) Adjust the lowest position of the pickup nozzle so
as not to bend the printed circuit board.
(2) Adjust the nozzle pressure within a static load of
1N to 3N during mounting.
2. Dirt particles and dust accumulated between the suction
nozzle and the cylinder inner wall prevent the nozzle from
moving smoothly. This imposes greater force upon the
chip during mounting, causing cracked chips. Also, the
locating claw, when worn out, imposes uneven forces on
the chip when positioning, causing cracked chips. The
suction nozzle and the locating claw must be maintained,
checked and replaced periodically.
123
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
Continued from the preceding page.
4-1. Reflow Soldering
For General Purpose
GRM Series
Capacitor Array
GNM Series
Low ESL
LLp Series
1. When sudden heat is applied to the components, the
mechanical strength of the components will decrease
because a sudden temperature change causes
deformation inside the components. In order to prevent
mechanical damage to the components, preheating is
required for both the components and the PCB board.
Preheating conditions are shown in table 1. It is required to
keep the temperature differential between the solder and
the component's surface (ΔT) as small as possible.
2. Solderability of tin plating termination chips might be
deteriorated when a low temperature soldering profile
where the peak solder temperature is below the melting
point of tin is used. Please confirm the solderability of tin
plated termination chips before use.
3. When components are immersed in solvent after mounting,
be sure to maintain the temperature difference (ΔT)
between the component and the solvent within the range
shown in the table 1.
[Standard Conditions for Reflow Soldering]
Infrared Reflow
Temperature (D)
Soldering
Peak Temperature
Gradual
Cooling
200°C
ΔT
170°C
150°C
130°C
Preheating
Time
60-120 seconds 30-60 seconds
Vapor Reflow
Temperature (D)
Soldering
Peak Temperature
Gradual
Cooling
ΔT
170°C
150°C
130°C
Table 1
Part Number
Temperature Differential
Preheating
GRM02/03/15/18/21/31
GJM02/03/15
High-Q Type
GJM Series
ΔTV190°C
LLL15/18/21/31
60-120 seconds
LLR18
Time
20 seconds max.
GQM18/21
GRM32/43/55
[Allowable Reflow Soldering Temperature and Time]
ΔTV130°C
LLM21/31
High Frequency
GQM Series
GNM
GQM22
Recommended Conditions
Pb-Sn Solder
Infrared Reflow Vapor Reflow
Lead Free Solder
Monolithic Microchip
GMA Series
Peak Temperature
230 to 250°C
230 to 240°C
240 to 260°C
Atmosphere
Air
Air
Air or N2
Soldering Temperature (D)
LLA18/21/31
280
270
260
250
240
230
220
0
30
60
90
120
Soldering Time (sec.)
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
For Bonding
GMD Series
Product Information
!Caution
4. Optimum Solder Amount for Reflow Soldering
4-1. Overly thick application of solder paste results in a
excessive solder fillet height.
This makes the chip more susceptible to mechanical
and thermal stress on the board and may cause the
chips to crack.
4-2. Too little solder paste results in a lack of adhesive
strength on the outer electrode, which may result in
chips breaking loose from the PCB.
4-3. Make sure the solder has been applied smoothly to
the end surface to a height of 0.2mm* min.
0.2mm∗ min.
∗ GRM02/03: 1/3 of Chip Thickness min.
in section
Inverting the PCB
Make sure not to impose any abnormal mechanical shocks
to the PCB.
Continued on the following page.
124
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
Continued from the preceding page.
4-2. Flow Soldering
Temperature (D)
Soldering
Soldering
Peak
Temperature
Gradual
Cooling
ΔT
Preheating
Peak
Temperature
30-90 seconds
Capacitor Array
GNM Series
Preheating
Time
5 seconds max.
[Allowable Flow Soldering Temperature and Time]
280
270
Low ESL
LLp Series
260
250
240
230
220
0
10
Table 2
20
30
40
Soldering Time (sec.)
Temperature Differential
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
GRM18/21/31
ΔTV150°C
LLL21/31
High-Q Type
GJM Series
Part Number
For General Purpose
GRM Series
[Standard Conditions for Flow Soldering]
Soldering Temperature (D)
1. When sudden heat is applied to the components, the
mechanical strength of the components will decrease
because a sudden temperature change causes
deformation inside the components. In order to prevent
mechanical damage in the components, preheating
should be required for both of the components and the
PCB board.
Preheating conditions are shown in table 2. It is required
to keep the temperature differential between the solder
and the component's surface (ΔT) as small as possible.
2. Excessively long soldering time or high soldering
temperature can result in leaching of the outer electrodes,
causing poor adhesion or a reduction in capacitance
value due to loss of contact between electrodes and end
termination.
3. When components are immersed in solvent after
mounting, be sure to maintain the temperature difference
(ΔT) between the component and solvent within the range
shown in the table 2.
4. Do not apply flow soldering to chips not listed in table 2.
GQM18/21
100 to 120°C
Soldering Peak Temperature
240 to 250°C
250 to 260°C
Atmosphere
Air
N2
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
5. Optimum Solder Amount for Flow Soldering
5-1. The top of the solder fillet should be lower than the
thickness of components. If the solder amount is
excessive, the risk of cracking is higher during board
bending or any other stressful condition.
Up to Chip Thickness
Monolithic Microchip
GMA Series
Lead Free Solder
90 to 110°C
Adhesive
in section
Product Information
!Caution
Continued on the following page.
For Bonding
GMD Series
Pb-Sn Solder
Preheating Peak Temperature
High Frequency
GQM Series
Recommended Conditions
125
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
Continued from the preceding page.
4-3. Correction with a Soldering Iron
For General Purpose
GRM Series
Capacitor Array
GNM Series
Low ESL
LLp Series
High-Q Type
GJM Series
High Frequency
GQM Series
Monolithic Microchip
GMA Series
1. When sudden heat is applied to the components when
using a soldering iron, the mechanical strength of the
components will decrease because the extreme
temperature change can cause deformations inside the
components. In order to prevent mechanical damage to
the components, preheating is required for both the
components and the PCB board. Preheating conditions
(The "Temperature of the Soldering Iron Tip", "Preheating
Temperature," "Temperature Differential" between the
iron tip and the components and the PCB), should be
within the conditions of table 3. It is required to keep the
temperature differential between the soldering iron and
the component surfaces (ΔT) as small as possible.
2. After soldering, do not allow the component/PCB to cool
down rapidly.
3. The operating time for the re-working should be as short
as possible. When re-working time is too long, it may
cause solder leaching, in turn causing a reduction in the
adhesive strength of the terminations.
4. Optimum solder amount when re-working with a soldering
iron
4-1. For sizes smaller than 0603, (GRM03/15/18,
GJM03/15, GQM18), the top of the solder fillet
should be lower than 2/3 of the thickness of the
component or 0.5mm whichever is smaller. For 0805
and larger sizes, (GRM21/31/32/43/55, GQM21/22),
the top of the solder fillet should be lower than 2/3 of
the thickness of the component. If the solder amount
is excessive, the risk of cracking is higher during
board bending or under any other stressful condition.
4-2. A soldering iron with a tip of ø3mm or smaller should
be used. It is also necessary to keep the soldering
iron from touching the components during the
re-work.
4-3. Solder wire with ø0.5mm or smaller is required for
soldering.
Table 3
Part Number
Temperature Preheating Temperature
of Soldering
Differential Atmosphere
Iron Tip Temperature
(ΔT)
GRM03/15/18/21/31
GJM03/15
350°C max. 150°C min. ΔTV190°C
Air
280°C max. 150°C min. ΔTV130°C
Air
GQM18/21
GRM32/43/55
GQM22
*Applicable for both Pb-Sn and Lead Free Solder.
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
Solder Amount
in section
4-4. Leaded Component Insertion
For Bonding
GMD Series
1. If the PCB is flexed when leaded components (such as
transformers and ICs) are being mounted, chips may
crack and solder joints may break.
Before mounting leaded components, support the PCB
using backup pins or special jigs to prevent warping.
5. Washing
Product Information
!Caution
Excessive ultrasonic oscillation during cleaning can cause
the PCBs to resonate, resulting in cracked chips or broken
solder joints. Take note not to vibrate PCBs.
Continued on the following page.
126
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
Continued from the preceding page.
[Not Recommended]
Peeling
Test-pin
Support Pin
Test-pin
[Bending]
High-Q Type
GJM Series
1. After mounting a capacitor on a printed circuit board, do
not apply any stress to the capacitor that is caused by
bending or twisting the board.
1-1. In cropping the board, the stress as shown at right
may cause the capacitor to crack.
Try not to apply this type of stress to a capacitor.
Low ESL
LLp Series
7. Printed Circuit Board Cropping
[Outline of Jig]
Printed Circuit Board
Direction of Load
V-groove
For Bonding
GMD Series
Board Cropping Jig
Recommended
Printed Circuit Board
Monolithic Microchip
GMA Series
High Frequency
GQM Series
[Twisting]
2. Ascertain of the cropping method for the printed circuit
board in advance.
2-1. Printed circuit board cropping shall be carried out by
using a jig or an apparatus to prevent the mechanical
stress that can occur to the board.
(1) Example of a suitable jig
Recommended example: the board should be
pushed as close to the cropping jig as possible
and from the back side of board in order to
minimize the compressive stress applied to the
capacitor.
Not recommended example: when the board is
pushed at a point far from the cropping jig and
from the front side of board as below, the
capacitor may form a crack caused by the tensile
stress applied to capacitor.
Not recommended
Direction of Load
Load Point
Components
Load Point
Capacitor Array
GNM Series
[Recommended]
Printed Circuit Board
Components
Continued on the following page.
127
Product Information
!Caution
1. Confirm position of the support pin or specific jig, when
inspecting the electrical performance of a capacitor after
mounting on the printed circuit board.
1-1. Avoid bending the printed circuit board by the
pressure of a test pin, etc.
The thrusting force of the test probe can flex the PCB,
resulting in cracked chips or open solder joints.
Provide support pins on the back side of the PCB to
prevent warping or flexing.
1-2. Avoid vibration of the board by shock when a test pin
contacts a printed circuit board.
For General Purpose
GRM Series
6. Electrical Test on Printed Circuit Board
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
Continued from the preceding page.
For General Purpose
GRM Series
(2) Example of a suitable machine
An outline of a printed circuit board cropping
machine is shown as follows. Along the lines with
the V-grooves on the printed circuit board, the top
and bottom blades are aligned to one another
when cropping the board.
The misalignment of the position between top and
bottom blades may cause the capacitor to crack.
[Outline of Machine]
Top Blade
Printed Circuit Board
Top Blade
[Principle of Operation]
Capacitor Array
GNM Series
Bottom Blade
V-groove
[Cross-section Diagram]
Printed Circuit Board
V-groove
Low ESL
LLp Series
Recommended
Not Recommended
Top-bottom Misalignment
Left-right Misalignment
Front-rear Misalignment
High-Q Type
GJM Series
Top Blade
Top Blade
Top Blade
Top Blade
Bottom Blade
Bottom Blade
Bottom Blade
Bottom Blade
c Others
High Frequency
GQM Series
Monolithic Microchip
GMA Series
For Bonding
GMD Series
Product Information
!Caution
1. Under Operation of Equipment
1-1. Do not touch a capacitor directly with bare hands
during operation in order to avoid the danger of an
electric shock.
1-2. Do not allow the terminals of a capacitor to come in
contact with any conductive objects (short-circuit).
Do not expose a capacitor to a conductive liquid,
including any acid or alkali solutions.
1-3. Confirm the environment in which the equipment will
operate is under the specified conditions.
Do not use the equipment under the following
environments.
(1) Being spattered with water or oil.
(2) Being exposed to direct sunlight.
(3) Being exposed to Ozone, ultraviolet rays or
radiation.
(4) Being exposed to toxic gas (e.g., hydrogen sulfide,
sulfur dioxide, chlorine, ammonia gas, etc.)
(5) Any vibrations or mechanical shocks exceeding the
specified limits.
(6) Moisture condensing environments.
1-4. Use damp proof countermeasures if using under any
conditions that can cause condensation.
2. Others
2-1. In an Emergency
(1) If the equipment should generate smoke, fire or
smell, immediately turn off or unplug the equipment.
128
If the equipment is not turned off or unplugged,
the hazards may be worsened by supplying
continuous power.
(2) In this type of situation, do not allow face and
hands to come in contact with the capacitor or
burns may be caused by the capacitor's high
temperature.
2-2. Disposal of Waste
When capacitors are disposed, they must be burned
or buried by an industrial waste vendor with the
appropriate licenses.
2-3. Circuit Design
GRM, GCM, GMA/D, LLL/A/M, GQM, GJM, GNM
Series capacitors in this catalog are not safety
certified products.
2-4. Remarks
Failure to follow the cautions may result, worst case,
in a short circuit and smoking when the product is
used.
The above notices are for standard applications and
conditions. Contact us when the products are used in
special mounting conditions.
Select optimum conditions for operation as they
determine the reliability of the product after assembly.
The data herein are given in typical values, not
guaranteed ratings.
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Notice
1. PCB Design
1. Notice for Pattern Forms
1-1. Unlike leaded components, chip components are
susceptible to flexing stresses since they are
mounted directly on the substrate.
They are also more sensitive to mechanical and
thermal stresses than leaded components.
Excess solder fillet height can multiply these stresses
and cause chip cracking. When designing substrates,
take land patterns and dimensions into consideration
to eliminate the possibility of excess solder fillet
height.
1-2. There is a possibility of chip crack caused by PCB
expansion/contraction with heat. Because stress for
chip is different depend on PCB material and
structure. Especially metal PCB such as alumina has
a greater risk of chip crack because of large
difference of thermal expansion coefficient. In case of
chip below 0402 size, there is also the same
possibility of crack with a single-layered glass epoxy
board.
Pattern Forms
Prohibited
Capacitor Array
GNM Series
Low ESL
LLp Series
c Soldering and Mounting
High-Q Type
GJM Series
operating environments may deteriorate due to
the corrosion of the terminations and the
penetration of moisture into the capacitor.
1-2. The same phenomenon as the above may occur
when the electrodes or terminals of the capacitor
are subject to moisture condensation.
1-3. The deterioration of characteristics and insulation
resistance due to the oxidization or corrosion of
terminal electrodes may result in breakdown when
the capacitor is exposed to corrosive or volatile
gases or solvents for long periods of time.
3. Piezo-electric Phenomenon
1. When using high dielectric constant type capacitors in
AC or pulse circuits, the capacitor itself vibrates at
specific frequencies and noise may be generated.
Moreover, when the mechanical vibration or shock is
added to the capacitor, noise may occur.
High Frequency
GQM Series
1. Operating Temperature
1. The operating temperature limit depends on the capacitor.
1-1. Do not apply temperatures exceeding the upper
operating temperature.
It is necessary to select a capacitor with a suitable
rated temperature that will cover the operating
temperature range.
It is also necessary to consider the temperature
distribution in equipment and the seasonal
temperature variable factor.
1-2. Consider the self-heating factor of the capacitor.
The surface temperature of the capacitor shall be
the upper operating temperature or less when
including the self-heating factors.
2. Atmosphere Surroundings (gaseous and liquid)
1. Restriction on the operating environment of capacitors.
1-1. Capacitors, when used in the above, unsuitable,
For General Purpose
GRM Series
c Rating
Correct
Solder (ground)
Monolithic Microchip
GMA Series
Chassis
Solder Resist
Placing Close to Chassis
Electrode Pattern
Lead Wire
Solder Resist
For Bonding
GMD Series
Placing
of Chip Components
and Leaded Components
Soldering Iron
Lead Wire
Solder Resist
Solder Resist
Lateral Mounting
Continued on the following page.
129
Product Information
Notice
Placing
of Leaded Components
after Chip Component
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Notice
Continued from the preceding page.
For General Purpose
GRM Series
2. Land Dimensions
2-1. A chip capacitor can be cracked due to the stress of
PCB bending, etc. if the land area is larger than
needed and has an excess amount of solder.
Please refer to the land dimensions in table 1 for flow
soldering, table 2 for reflow soldering, table 3 for
GNM & LLA, and table 4 for LLM.
Please confirm the suitable land dimension by
evaluating the actual SET / PCB.
Chip Capacitor
Land
c
b
a
Solder Resist
Capacitor Array
GNM Series
Table 1 Flow Soldering Method
Dimensions
Chip (LgW)
a
b
c
GRM18
GQM18
1.6g0.8
0.6 to 1.0
0.8 to 0.9
0.6 to 0.8
GRM21
GQM21
2.0g1.25
1.0 to 1.2
0.9 to 1.0
0.8 to 1.1
GRM31
3.2g1.6
2.2 to 2.6
1.0 to 1.1
1.0 to 1.4
LLL21
1.25g2.0
0.4 to 0.7
0.5 to 0.7
1.4 to 1.8
LLL31
1.6g3.2
0.6 to 1.0
0.8 to 0.9
2.6 to 2.8
Part Number
Low ESL
LLp Series
(in mm)
Table 2 Reflow Soldering Method
High-Q Type
GJM Series
Dimensions
Chip (LgW)
a
b
c
GRM02
GJM02
0.4g0.2
0.16 to 0.2
0.12 to 0.18
0.2 to 0.23
GRM03
GJM03
0.6g0.3
0.2 to 0.3
0.2 to 0.35
0.2 to 0.4
GRM15
GJM15
1.0g0.5 (within ±0.10)
0.3 to 0.5
0.35 to 0.45
0.4 to 0.6
1.0g0.5 (±0.15/±0.20)
0.4 to 0.6
0.40 to 0.50
0.5 to 0.7
GRM18
GQM18
1.6g0.8 (within ±0.10)
0.6 to 0.8
0.6 to 0.7
0.6 to 0.8
1.6g0.8 (±0.15/±0.20)
0.7 to 0.9
0.7 to 0.8
0.8 to 1.0
GQM21
2.0g1.25
1.0 to 1.2
0.6 to 0.7
0.8 to 1.1
2.0g1.25 (within ±1.0)
1.2
0.6
1.25
2.0g1.25 (±0.15)
1.2
0.6 to 0.8
1.2 to 1.4
Part Number
High Frequency
GQM Series
GRM21
Monolithic Microchip
GMA Series
GRM31
2.0g1.25 (±0.20)
1.0 to 1.4
0.6 to 0.8
1.2 to 1.4
3.2g1.6 (within ±0.20)
1.8 to 2.0
0.9 to 1.2
1.5 to 1.7
For Bonding
GMD Series
3.2g1.6 (±0.30)
1.9 to 2.1
1.0 to 1.3
1.7 to 1.9
GRM32
3.2g2.5
2.0 to 2.4
1.0 to 1.2
1.8 to 2.3
GRM43
4.5g3.2
3.0 to 3.5
1.2 to 1.4
2.3 to 3.0
GRM55
5.7g5.0
4.0 to 4.6
1.4 to 1.6
3.5 to 4.8
LLL15
0.5g1.0
0.15 to 0.2
0.2 to 0.25
0.7 to 1.0
LLL18
LLR18
0.8g1.6
0.2 to 0.3
0.3 to 0.4
1.4 to 1.6
LLL21
1.25g2.0
0.4 to 0.6
0.4 to 0.5
1.4 to 1.8
LLL31
1.6g3.2
0.6 to 0.8
0.6 to 0.7
2.6 to 2.8
GQM22
2.8g2.8
2.2 to 2.5
0.8 to 1.0
1.9 to 2.3
(in mm)
Continued on the following page.
Product Information
Notice
130
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Notice
Continued from the preceding page.
GNMpp2
GNMpp4
Chip Capacitor
Chip Capacitor
a
For General Purpose
GRM Series
LLA
a
b
b
c
Land
p
c
Land
p
Capacitor Array
GNM Series
Table 3 GNM, LLA Series for Reflow Soldering Land Dimensions
L
W
a
b
c
p
GNM0M2
0.9
0.6
0.12 to 0.20*
0.35 to 0.40*
0.3
0.45
GNM1M2
1.37
1.0
0.4 to 0.5
0.35 to 0.45
0.3 to 0.35
0.64
GNM212
2.0
1.25
0.6 to 0.7
0.5 to 0.7
0.4 to 0.5
1.0
GNM214
2.0
1.25
0.6 to 0.7
0.5 to 0.7
0.25 to 0.35
0.5
GNM314
3.2
1.6
0.8 to 1.0
0.7 to 0.9
0.3 to 0.4
0.8
LLA18
1.6
0.8
0.3 to 0.4
0.25 to 0.35
0.15 to 0.25
0.4
LLA21
2.0
1.25
0.5 to 0.7
0.35 to 0.6
0.2 to 0.3
0.5
LLA31
3.2
1.6
0.7 to 0.9
0.4 to 0.7
0.3 to 0.4
0.8
Low ESL
LLp Series
Dimensions (mm)
Part Number
* 0.82Va+2bV1.00
c
High-Q Type
GJM Series
p
LLM
b
e
a
Chip Capacitor
c'
b'
f
High Frequency
GQM Series
d
Table 4 LLM Series for Reflow Soldering Land Dimensions
Dimensions (mm)
Part Number
a
b, b'
c, c'
d
e
f
p
LLM21
0.6 to 0.8
(0.3 to 0.5)
0.3
2.0 to 2.6
1.3 to 1.8
1.4 to 1.6
0.5
LLM31
1.0
(0.3 to 0.5)
0.4
3.2 to 3.6
1.6 to 2.0
2.6
0.8
Monolithic Microchip
GMA Series
b=(c-e)/2, b'=(d-f)/2
2. Adhesive Application
Part Number
GRM18, GQM18
a=20 to 70μm
b=30 to 35μm
c=50 to 105μm
a
For Bonding
GMD Series
Chip Capacitor
c
Board
Adhesive
Land
b
Product Information
Notice
1. Thin or insufficient adhesive can cause the chips to
loosen or become disconnected during flow soldering.
The amount of adhesive must be more than dimension c,
shown in the drawing at right, to obtain the correct
bonding strength.
The chip's electrode thickness and land thickness must
also be taken into consideration.
2. Low viscosity adhesive can cause chips to slip after
mounting. The adhesive must have a viscosity of
5000Pa s s (500ps) min. (at 25°C).
3. Adhesive Coverage
Adhesive Coverage*
0.05mg min.
GRM21, LLL21, GQM21
0.1mg min.
GRM31, LLL31
0.15mg min.
*Nominal Value
Continued on the following page.
131
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Notice
Continued from the preceding page.
3. Adhesive Curing
For General Purpose
GRM Series
1. Insufficient curing of the adhesive can cause chips to
disconnect during flow soldering and deterioration in the
insulation resistance between the outer electrodes due to
moisture absorption.
Control curing temperature and time in order to prevent
insufficient hardening.
Capacitor Array
GNM Series
4. Flux Application
Low ESL
LLp Series
1. An excessive amount of flux generates a large quantity of
flux gas, which can cause a deterioration of solderability,
so apply flux thinly and evenly throughout. (A foaming
system is generally used for flow soldering.)
2. Flux containing too high a percentage of halide may
cause corrosion of the outer electrodes unless there is
sufficient cleaning. Use flux with a halide content of 0.2%
max.
3. Do not use strong acidic flux.
4. Do not use water-soluble *flux.
(*Water-soluble flux can be defined as non-rosin type flux
including wash-type flux and non-wash-type flux.)
5. Flow Soldering
High-Q Type
GJM Series
o Set temperature and time to ensure that leaching of the
outer electrode does not exceed 25% of the chip end
area as a single chip (full length of the edge A-B-C-D
shown at right) and 25% of the length A-B shown as
mounted on substrate.
[As a Single Chip]
A
B
D
Outer Electrode
C
[As Mounted on Substrate]
High Frequency
GQM Series
B
A
Monolithic Microchip
GMA Series
6. Washing
For Bonding
GMD Series
1. Please evaluate a capacitor using actual cleaning
equipment and conditions to confirm the quality and
select the applicable solvent.
2. Unsuitable cleaning solvent may leave residual flux or
other foreign substances, causing deterioration of
electrical characteristics and the reliability of the
capacitors.
3. Select the proper cleaning conditions.
3-1. Improper cleaning conditions (excessive or
insufficient) may result in the deterioration of the
performance of the capacitors.
Continued on the following page.
Product Information
Notice
132
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Notice
Continued from the preceding page.
Select a resin for which the thermal expansion coefficient
is as close to that of the capacitor as possible.
A silicone resin can be used as an under-coating to buffer
against the stress.
2. Select a resin that is less hygroscopic.
Using hygroscopic resins under high humidity conditions
may cause the deterioration of the insulation resistance of
a capacitor.
An epoxy resin can be used as a less hygroscopic resin.
Capacitor Array
GNM Series
1. A crack may be caused in the capacitor due to the stress
of the thermal contraction of the resin during curing
process.
The stress is affected by the amount of resin and curing
contraction.
Select a resin with low curing contraction.
The difference in the thermal expansion coefficient
between a coating resin or a molding resin and the
capacitor may cause the destruction and deterioration of
the capacitor such as a crack or peeling, and lead to the
deterioration of insulation resistance or dielectric
breakdown.
For General Purpose
GRM Series
7. Coating
2. Wire Bonding
s 7IRE
'OLD WIRE MICRO M INCH DIAMETER
s "ONDING
(1) Thermo compression, ultrasonic ball bonding.
2EQUIRED STAGE TEMPERATURE TO #
2EQUIRED WEDGE OR CAPILLARY WEIGHT . TO .
(4) Bond the capacitor and base substrate or other
devices with gold wire.
High-Q Type
GJM Series
1. Die Bonding of Capacitors
s 5SE THE FOLLOWING MATERIALS FOR THE "RAZING ALLOYS
Au-Sn (80/20) 300 to 320 °C in N2 atmosphere
s -OUNTING
(1) Control the temperature of the substrate so it
MATCHES THE TEMPERATURE OF THE BRAZING ALLOY
0LACE THE BRAZING ALLOY ON THE SUBSTRATE AND PLACE
the capacitor on the alloy. Hold the capacitor and
gently apply the load. Be sure to complete the
operation within 1 minute.
Low ESL
LLp Series
8. Die Bonding/Wire Bonding (GMA or GMD Series)
Monolithic Microchip
GMA Series
For Bonding
GMD Series
1-2. Do not apply excessive vibration, shock, and
pressure to the capacitor.
(1) When excessive mechanical shock or pressure
is applied to a capacitor, chipping or cracking
may occur in the ceramic body of the capacitor.
(2) When the sharp edge of an air driver, a
SOLDERING IRON TWEEZERS A CHASSIS ETC
impacts strongly on the surface of the capacitor,
the capacitor may crack and short-circuit.
1-3. Do not use a capacitor to which excessive shock
was applied by dropping, etc.
A capacitor dropped accidentally during
processing may be damaged.
Product Information
Notice
1. Transportation
1. The performance of a capacitor may be affected by the
conditions during transportation.
1-1. The capacitors shall be protected against
excessive temperature, humidity and mechanical
force during transportation.
(1) Climatic condition
s LOW AIR TEMPERATURE #
s CHANGE OF TEMPERATURE AIRAIR # #
s LOW AIR PRESSURE K0A
s CHANGE OF AIR PRESSURE K0AMIN
-ECHANICAL CONDITION
Transportation shall be done in such a way that
the boxes are not deformed and forces are not
directly passed on to the inner packaging.
High Frequency
GQM Series
c Others
133
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
MEMO
134
C02E.pdf
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose
GRM/GRJ/GR3 Series
p136
p141
p143
p145
p148
p150
p153
p155
Only for Applications
For LCD Backlight Inverter Circuit
GRM/DC3.15kV Series
Specifications and Test Methods
For Information Devices GR4 Series
Specifications and Test Methods
For Camera Flash Circuit GR7 Series
Specifications and Test Methods
AC250V Type (Which Meet Japanese Law)
GA2 Series
Specifications and Test Methods
p158
p159
p161
p162
p165
p166
p169
p170
Safety
Saf
ffety Standard
Stand
Certified GA3 Series
UL, IEC60
U
IEC60384-14 Class X1/Y2 Type GC
IIEC60384-14
EC60384- Class Y2, X1/Y2 Type GF
EC60384
IIEC60384-14
EC60384-- Class Y3 Type GD
IIEC60384-14
EC60384-- Class X2 Type GB
Specific
Specifications and Test Methods
Reference Da
Data
a (Typical Example)
Package
!Caution/Notice
!Caution/No
p173
p174
p176
p177
p178
p182
p185
p188
Only for Applications
Temperature Compensating Type
GRM Series (250Vdc min.)
Specifications and Test Methods
High Dielectric Constant Type
GRM Series (250Vdc min.)
Specifications and Test Methods
Soft Termination Type GRJ Series
Specifications and Test Methods
Large Capacitance and High Allowable
Ripple Current GR3 Series
Specifications and Test Methods
AC250V Type
GA2 Series
For General Purpose
GRM (250Vdc min.)/GRJ/GR3 Series
Safety Standard
Certified GA3 Series
Chip Monolithic Ceramic Capacitors
(Medium Voltage)
Product Information
Contents
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors (Medium Voltage)
Temperature Compensating Type GRM Series (250Vdc min.)
g
e
c Features
Only for Applications
1. Low-loss and suitable for high frequency circuits
2. Murata's original internal electrode structure
provides high flash-over voltage.
3. A new monolithic structure for small, surfacemountable devices capable of operating at high
voltage levels
4. Sn-plated external electrodes provides good
solderability.
5. Use the GRM21/31 type with flow or reflow soldering,
and other types with reflow soldering only.
T
For General Purpose
GRM/GRJ/GR3 Series
e
L
W
Dimensions (mm)
Part Number
L
W
T
e min.
g min.
1.0 +0,- 0.3
GRM21A
0.7
2.0 ±0.2 1.25 ±0.2
1.25 ±0.2
GRM21B
1.0 +0,- 0.3
GRM31A
1.6 ±0.2 1.25 +0,- 0.3
GRM31B
3.2 ±0.2
GRM31C
1.6 ±0.2
1.5*
1.0 +0,- 0.3
GRM32A
1.25 +0,- 0.3
GRM32B
2.5 ±0.2
0.3
3.2 ±0.2
GRM32Q
1.5 +0,- 0.3
GRM32D
2.0 +0,- 0.3
1.0 +0,- 0.3
2.0 ±0.2
2.9
GRM42A
4.5 ±0.3
GRM43Q
1.5 +0,- 0.3
4.5 ±0.4
3.2 ±0.3
2.2
GRM43D
2.0 +0,- 0.3
GRM55Q
1.5 +0,- 0.3
5.7 ±0.4
5.0 ±0.4
3.2
GRM55D
2.0 +0,- 0.3
* GRM31A7U3D, GRM32A7U3D, GRM32B7U3D: 1.8mm min.
AC250V Type
GA2 Series
c Applications
Ideal for use on high frequency pulse circuits such
as snubber circuits for switching power supplies,
DC-DC converters, ballasts (inverter fluorescent
lamps), etc.
Safety Standard
Certified GA3 Series
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Product Information
C0G Characteristics
Rated Voltage
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GRM21A5C2E100JW01D
250Vdc
C0G (EIA)
10pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E120JW01D
250Vdc
C0G (EIA)
12pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E150JW01D
250Vdc
C0G (EIA)
15pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E180JW01D
250Vdc
C0G (EIA)
18pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E220JW01D
250Vdc
C0G (EIA)
22pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E270JW01D
250Vdc
C0G (EIA)
27pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E330JW01D
250Vdc
C0G (EIA)
33pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E390JW01D
250Vdc
C0G (EIA)
39pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E470JW01D
250Vdc
C0G (EIA)
47pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E560JW01D
250Vdc
C0G (EIA)
56pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E680JW01D
250Vdc
C0G (EIA)
68pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E820JW01D
250Vdc
C0G (EIA)
82pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E101JW01D
250Vdc
C0G (EIA)
100pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E121JW01D
250Vdc
C0G (EIA)
120pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E151JW01D
250Vdc
C0G (EIA)
150pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E181JW01D
250Vdc
C0G (EIA)
180pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E221JW01D
250Vdc
C0G (EIA)
220pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E271JW01D
250Vdc
C0G (EIA)
270pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A5C2E331JW01D
250Vdc
C0G (EIA)
330pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM31A5C2J100JW01D
630Vdc
C0G (EIA)
10pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J120JW01D
630Vdc
C0G (EIA)
12pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J150JW01D
630Vdc
C0G (EIA)
15pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J180JW01D
630Vdc
C0G (EIA)
18pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
Part Number
Continued on the following page.
136
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GRM31A5C2J220JW01D
630Vdc
C0G (EIA)
22pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J270JW01D
630Vdc
C0G (EIA)
27pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J330JW01D
630Vdc
C0G (EIA)
33pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J390JW01D
630Vdc
C0G (EIA)
39pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J470JW01D
630Vdc
C0G (EIA)
47pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J560JW01D
630Vdc
C0G (EIA)
56pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J680JW01D
630Vdc
C0G (EIA)
68pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J820JW01D
630Vdc
C0G (EIA)
82pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J101JW01D
630Vdc
C0G (EIA)
100pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J121JW01D
630Vdc
C0G (EIA)
120pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J151JW01D
630Vdc
C0G (EIA)
150pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J181JW01D
630Vdc
C0G (EIA)
180pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J221JW01D
630Vdc
C0G (EIA)
220pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J271JW01D
630Vdc
C0G (EIA)
270pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J331JW01D
630Vdc
C0G (EIA)
330pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J391JW01D
630Vdc
C0G (EIA)
390pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J471JW01D
630Vdc
C0G (EIA)
470pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C2J561JW01D
630Vdc
C0G (EIA)
560pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31B5C2J681JW01L
630Vdc
C0G (EIA)
680pF±5%
3.2
1.6
1.25
1.5mm
0.3mm min.
GRM31B5C2J821JW01L
630Vdc
C0G (EIA)
820pF±5%
3.2
1.6
1.25
1.5mm
0.3mm min.
GRM31B5C2J102JW01L
630Vdc
C0G (EIA)
1000pF±5%
3.2
1.6
1.25
1.5mm
0.3mm min.
GRM31A5C3A100JW01D
1000Vdc
C0G (EIA)
10pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A120JW01D
1000Vdc
C0G (EIA)
12pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A150JW01D
1000Vdc
C0G (EIA)
15pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A180JW01D
1000Vdc
C0G (EIA)
18pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A220JW01D
1000Vdc
C0G (EIA)
22pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A270JW01D
1000Vdc
C0G (EIA)
27pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A330JW01D
1000Vdc
C0G (EIA)
33pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A390JW01D
1000Vdc
C0G (EIA)
39pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A470JW01D
1000Vdc
C0G (EIA)
47pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A560JW01D
1000Vdc
C0G (EIA)
56pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A680JW01D
1000Vdc
C0G (EIA)
68pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A820JW01D
1000Vdc
C0G (EIA)
82pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A101JW01D
1000Vdc
C0G (EIA)
100pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A121JW01D
1000Vdc
C0G (EIA)
120pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A151JW01D
1000Vdc
C0G (EIA)
150pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A181JW01D
1000Vdc
C0G (EIA)
180pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A5C3A221JW01D
1000Vdc
C0G (EIA)
220pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
Rated Voltage
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GRM21A7U2E101JW31D
250Vdc
U2J (EIA)
100pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A7U2E121JW31D
250Vdc
U2J (EIA)
120pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A7U2E151JW31D
250Vdc
U2J (EIA)
150pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A7U2E181JW31D
250Vdc
U2J (EIA)
180pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A7U2E221JW31D
250Vdc
U2J (EIA)
220pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A7U2E271JW31D
250Vdc
U2J (EIA)
270pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A7U2E331JW31D
250Vdc
U2J (EIA)
330pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A7U2E391JW31D
250Vdc
U2J (EIA)
390pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A7U2E471JW31D
250Vdc
U2J (EIA)
470pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A7U2E561JW31D
250Vdc
U2J (EIA)
560pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A7U2E681JW31D
250Vdc
U2J (EIA)
680pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A7U2E821JW31D
250Vdc
U2J (EIA)
820pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A7U2E102JW31D
250Vdc
U2J (EIA)
1000pF±5%
2
1.25
1
0.7mm
0.3mm min.
U2J Characteristics
Part Number
Continued on the following page.
137
Only for Applications
Length L
(mm)
AC250V Type
GA2 Series
Capacitance
Safety Standard
Certified GA3 Series
TC Code
(Standard)
Product Information
Rated Voltage
Part Number
For General Purpose
GRM/GRJ/GR3 Series
Continued from the preceding page.
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Continued from the preceding page.
Rated Voltage
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GRM21A7U2E122JW31D
250Vdc
U2J (EIA)
1200pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A7U2E152JW31D
250Vdc
U2J (EIA)
1500pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21A7U2E182JW31D
250Vdc
U2J (EIA)
1800pF±5%
2
1.25
1
0.7mm
0.3mm min.
For General Purpose
GRM/GRJ/GR3 Series
GRM21A7U2E222JW31D
250Vdc
U2J (EIA)
2200pF±5%
2
1.25
1
0.7mm
0.3mm min.
GRM21B7U2E272JW32L
250Vdc
U2J (EIA)
2700pF±5%
2
1.25
1.45
0.7mm
0.3mm min.
GRM31A7U2E272JW31D
250Vdc
U2J (EIA)
2700pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM21B7U2E332JW32L
250Vdc
U2J (EIA)
3300pF±5%
2
1.25
1.45
0.7mm
0.3mm min.
GRM31A7U2E332JW31D
250Vdc
U2J (EIA)
3300pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM21B7U2E392JW32L
250Vdc
U2J (EIA)
3900pF±5%
2
1.25
1.45
0.7mm
0.3mm min.
GRM31A7U2E392JW31D
250Vdc
U2J (EIA)
3900pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
Only for Applications
GRM21B7U2E472JW32L
250Vdc
U2J (EIA)
4700pF±5%
2
1.25
1.45
0.7mm
0.3mm min.
GRM31A7U2E472JW31D
250Vdc
U2J (EIA)
4700pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM21B7U2E562JW32L
250Vdc
U2J (EIA)
5600pF±5%
2
1.25
1.45
0.7mm
0.3mm min.
GRM31A7U2E562JW31D
250Vdc
U2J (EIA)
5600pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31B7U2E682JW31L
250Vdc
U2J (EIA)
6800pF±5%
3.2
1.6
1.25
1.5mm
0.3mm min.
GRM31B7U2E822JW31L
250Vdc
U2J (EIA)
8200pF±5%
3.2
1.6
1.25
1.5mm
0.3mm min.
GRM31B7U2E103JW31L
250Vdc
U2J (EIA)
10000pF±5%
3.2
1.6
1.25
1.5mm
0.3mm min.
GRM31A7U2J100JW31D
630Vdc
U2J (EIA)
10pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J120JW31D
630Vdc
U2J (EIA)
12pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J150JW31D
630Vdc
U2J (EIA)
15pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J180JW31D
630Vdc
U2J (EIA)
18pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J220JW31D
630Vdc
U2J (EIA)
22pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J270JW31D
630Vdc
U2J (EIA)
27pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J330JW31D
630Vdc
U2J (EIA)
33pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J390JW31D
630Vdc
U2J (EIA)
39pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J470JW31D
630Vdc
U2J (EIA)
47pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J560JW31D
630Vdc
U2J (EIA)
56pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J680JW31D
630Vdc
U2J (EIA)
68pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J820JW31D
630Vdc
U2J (EIA)
82pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J101JW31D
630Vdc
U2J (EIA)
100pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J121JW31D
630Vdc
U2J (EIA)
120pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J151JW31D
630Vdc
U2J (EIA)
150pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J181JW31D
630Vdc
U2J (EIA)
180pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J221JW31D
630Vdc
U2J (EIA)
220pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J271JW31D
630Vdc
U2J (EIA)
270pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J331JW31D
630Vdc
U2J (EIA)
330pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J391JW31D
630Vdc
U2J (EIA)
390pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J471JW31D
630Vdc
U2J (EIA)
470pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J561JW31D
630Vdc
U2J (EIA)
560pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J681JW31D
630Vdc
U2J (EIA)
680pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J821JW31D
630Vdc
U2J (EIA)
820pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J102JW31D
630Vdc
U2J (EIA)
1000pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U2J122JW31D
630Vdc
U2J (EIA)
1200pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM32A7U2J122JW31D
630Vdc
U2J (EIA)
1200pF±5%
3.2
2.5
1
1.5mm
0.3mm min.
GRM31A7U2J152JW31D
630Vdc
U2J (EIA)
1500pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
Part Number
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
GRM32A7U2J152JW31D
630Vdc
U2J (EIA)
1500pF±5%
3.2
2.5
1
1.5mm
0.3mm min.
GRM31A7U2J182JW31D
630Vdc
U2J (EIA)
1800pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM32A7U2J182JW31D
630Vdc
U2J (EIA)
1800pF±5%
3.2
2.5
1
1.5mm
0.3mm min.
GRM31A7U2J222JW31D
630Vdc
U2J (EIA)
2200pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM32A7U2J222JW31D
630Vdc
U2J (EIA)
2200pF±5%
3.2
2.5
1
1.5mm
0.3mm min.
GRM31B7U2J272JW31L
630Vdc
U2J (EIA)
2700pF±5%
3.2
1.6
1.25
1.5mm
0.3mm min.
GRM31B7U2J332JW31L
630Vdc
U2J (EIA)
3300pF±5%
3.2
1.6
1.25
1.5mm
0.3mm min.
GRM31C7U2J392JW32L
630Vdc
U2J (EIA)
3900pF±5%
3.2
1.6
1.8
1.5mm
0.3mm min.
GRM31C7U2J472JW32L
630Vdc
U2J (EIA)
4700pF±5%
3.2
1.6
1.8
1.5mm
0.3mm min.
GRM32B7U2J562JW31L
630Vdc
U2J (EIA)
5600pF±5%
3.2
2.5
1.25
1.5mm
0.3mm min.
GRM32Q7U2J682JW31L
630Vdc
U2J (EIA)
6800pF±5%
3.2
2.5
1.5
1.5mm
0.3mm min.
GRM32D7U2J822JW31L
630Vdc
U2J (EIA)
8200pF±5%
3.2
2.5
2
1.5mm
0.3mm min.
Continued on the following page.
138
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
2
1.5mm
0.3mm min.
3.2
1.5
2.2mm
0.3mm min.
4.5
3.2
2
2.2mm
0.3mm min.
4.5
3.2
2
2.2mm
0.3mm min.
22000pF±5%
4.5
3.2
2
2.2mm
0.3mm min.
U2J (EIA)
27000pF±5%
5.7
5.0
1.5
3.2mm
0.3mm min.
630Vdc
U2J (EIA)
33000pF±5%
5.7
5.0
2
3.2mm
0.3mm min.
630Vdc
U2J (EIA)
39000pF±5%
5.7
5.0
2
3.2mm
0.3mm min.
Width W
(mm)
GRM32D7U2J103JW31L
630Vdc
U2J (EIA)
10000pF±5%
3.2
GRM43Q7U2J123JW31L
630Vdc
U2J (EIA)
12000pF±5%
4.5
GRM43D7U2J153JW31L
630Vdc
U2J (EIA)
15000pF±5%
GRM43D7U2J183JW31L
630Vdc
U2J (EIA)
18000pF±5%
GRM43D7U2J223JW31L
630Vdc
U2J (EIA)
GRM55Q7U2J273JW31L
630Vdc
GRM55D7U2J333JW31L
GRM55D7U2J393JW31L
GRM55D7U2J473JW31L
630Vdc
U2J (EIA)
47000pF±5%
5.7
5.0
2
3.2mm
0.3mm min.
GRM31A7U3A100JW31D
1000Vdc
U2J (EIA)
10pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A120JW31D
1000Vdc
U2J (EIA)
12pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A150JW31D
1000Vdc
U2J (EIA)
15pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A180JW31D
1000Vdc
U2J (EIA)
18pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A220JW31D
1000Vdc
U2J (EIA)
22pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A270JW31D
1000Vdc
U2J (EIA)
27pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A330JW31D
1000Vdc
U2J (EIA)
33pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A390JW31D
1000Vdc
U2J (EIA)
39pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A470JW31D
1000Vdc
U2J (EIA)
47pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A560JW31D
1000Vdc
U2J (EIA)
56pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A680JW31D
1000Vdc
U2J (EIA)
68pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A820JW31D
1000Vdc
U2J (EIA)
82pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A101JW31D
1000Vdc
U2J (EIA)
100pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A121JW31D
1000Vdc
U2J (EIA)
120pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A151JW31D
1000Vdc
U2J (EIA)
150pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A181JW31D
1000Vdc
U2J (EIA)
180pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A221JW31D
1000Vdc
U2J (EIA)
220pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A271JW31D
1000Vdc
U2J (EIA)
270pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31A7U3A331JW31D
1000Vdc
U2J (EIA)
330pF±5%
3.2
1.6
1
1.5mm
0.3mm min.
GRM31B7U3A391JW31L
1000Vdc
U2J (EIA)
390pF±5%
3.2
1.6
1.25
1.5mm
0.3mm min.
GRM31B7U3A471JW31L
1000Vdc
U2J (EIA)
470pF±5%
3.2
1.6
1.25
1.5mm
0.3mm min.
GRM31B7U3A561JW31L
1000Vdc
U2J (EIA)
560pF±5%
3.2
1.6
1.25
1.5mm
0.3mm min.
GRM31B7U3A681JW31L
1000Vdc
U2J (EIA)
680pF±5%
3.2
1.6
1.25
1.5mm
0.3mm min.
GRM31C7U3A821JW32L
1000Vdc
U2J (EIA)
820pF±5%
3.2
1.6
1.8
1.5mm
0.3mm min.
GRM31C7U3A102JW32L
1000Vdc
U2J (EIA)
1000pF±5%
3.2
1.6
1.8
1.5mm
0.3mm min.
GRM32B7U3A122JW31L
1000Vdc
U2J (EIA)
1200pF±5%
3.2
2.5
1.25
1.5mm
0.3mm min.
GRM32Q7U3A152JW31L
1000Vdc
U2J (EIA)
1500pF±5%
3.2
2.5
1.5
1.5mm
0.3mm min.
GRM32D7U3A182JW31L
1000Vdc
U2J (EIA)
1800pF±5%
3.2
2.5
2
1.5mm
0.3mm min.
GRM32D7U3A222JW31L
1000Vdc
U2J (EIA)
2200pF±5%
3.2
2.5
2
1.5mm
0.3mm min.
GRM43Q7U3A272JW31L
1000Vdc
U2J (EIA)
2700pF±5%
4.5
3.2
1.5
2.2mm
0.3mm min.
GRM43Q7U3A332JW31L
1000Vdc
U2J (EIA)
3300pF±5%
4.5
3.2
1.5
2.2mm
0.3mm min.
GRM43D7U3A392JW31L
1000Vdc
U2J (EIA)
3900pF±5%
4.5
3.2
2
2.2mm
0.3mm min.
GRM43D7U3A472JW31L
1000Vdc
U2J (EIA)
4700pF±5%
4.5
3.2
2
2.2mm
0.3mm min.
GRM55Q7U3A562JW31L
1000Vdc
U2J (EIA)
5600pF±5%
5.7
5.0
1.5
3.2mm
0.3mm min.
GRM55Q7U3A682JW31L
1000Vdc
U2J (EIA)
6800pF±5%
5.7
5.0
1.5
3.2mm
0.3mm min.
GRM55D7U3A822JW31L
1000Vdc
U2J (EIA)
8200pF±5%
5.7
5.0
2
3.2mm
0.3mm min.
0.3mm min.
GRM55D7U3A103JW31L
1000Vdc
U2J (EIA)
10000pF±5%
5.7
5.0
2
3.2mm
GRM31A7U3D100JW31D
2000Vdc
U2J (EIA)
10pF±5%
3.2
1.6
1
1.8mm
0.3mm min.
GRM31A7U3D120JW31D
2000Vdc
U2J (EIA)
12pF±5%
3.2
1.6
1
1.8mm
0.3mm min.
GRM31A7U3D150JW31D
2000Vdc
U2J (EIA)
15pF±5%
3.2
1.6
1
1.8mm
0.3mm min.
GRM31A7U3D180JW31D
2000Vdc
U2J (EIA)
18pF±5%
3.2
1.6
1
1.8mm
0.3mm min.
GRM31A7U3D220JW31D
2000Vdc
U2J (EIA)
22pF±5%
3.2
1.6
1
1.8mm
0.3mm min.
GRM31A7U3D270JW31D
2000Vdc
U2J (EIA)
27pF±5%
3.2
1.6
1
1.8mm
0.3mm min.
GRM31A7U3D330JW31D
2000Vdc
U2J (EIA)
33pF±5%
3.2
1.6
1
1.8mm
0.3mm min.
GRM31A7U3D390JW31D
2000Vdc
U2J (EIA)
39pF±5%
3.2
1.6
1
1.8mm
0.3mm min.
GRM31A7U3D470JW31D
2000Vdc
U2J (EIA)
47pF±5%
3.2
1.6
1
1.8mm
0.3mm min.
GRM31A7U3D560JW31D
2000Vdc
U2J (EIA)
56pF±5%
3.2
1.6
1
1.8mm
0.3mm min.
GRM31A7U3D680JW31D
2000Vdc
U2J (EIA)
68pF±5%
3.2
1.6
1
1.8mm
0.3mm min.
Continued on the following page.
139
Only for Applications
2.5
Length L
(mm)
AC250V Type
GA2 Series
Electrode e
Capacitance
Safety Standard
Certified GA3 Series
Electrode g
min.
TC Code
(Standard)
Product Information
Thickness T
max.
(mm)
Rated Voltage
Part Number
For General Purpose
GRM/GRJ/GR3 Series
Continued from the preceding page.
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Continued from the preceding page.
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
U2J (EIA)
82pF±5%
3.2
2.5
1
1.8mm
0.3mm min.
U2J (EIA)
100pF±5%
3.2
2.5
1
1.8mm
0.3mm min.
2000Vdc
U2J (EIA)
120pF±5%
3.2
2.5
1
1.8mm
0.3mm min.
For General Purpose
GRM/GRJ/GR3 Series
GRM32A7U3D151JW31D
2000Vdc
U2J (EIA)
150pF±5%
3.2
2.5
1
1.8mm
0.3mm min.
GRM32B7U3D181JW31L
2000Vdc
U2J (EIA)
180pF±5%
3.2
2.5
1.25
1.8mm
0.3mm min.
GRM32B7U3D221JW31L
2000Vdc
U2J (EIA)
220pF±5%
3.2
2.5
1.25
1.8mm
0.3mm min.
GRM42A7U3F270JW31L
3150Vdc
U2J (EIA)
27pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
GRM42A7U3F330JW31L
3150Vdc
U2J (EIA)
33pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
GRM42A7U3F390JW31L
3150Vdc
U2J (EIA)
39pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
GRM42A7U3F470JW31L
3150Vdc
U2J (EIA)
47pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
Only for Applications
GRM42A7U3F560JW31L
3150Vdc
U2J (EIA)
56pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
GRM42A7U3F680JW31L
3150Vdc
U2J (EIA)
68pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
GRM42A7U3F820JW31L
3150Vdc
U2J (EIA)
82pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
GRM42A7U3F101JW31L
3150Vdc
U2J (EIA)
100pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
Rated Voltage
TC Code
(Standard)
GRM32A7U3D820JW31D
2000Vdc
GRM32A7U3D101JW31D
2000Vdc
GRM32A7U3D121JW31D
Part Number
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
140
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Specifications and Test Methods
Operating
Temperature Range
–55 to +125°C
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimension
Using calipers and micrometers
–
No failure should be observed when voltage in the Table is
applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
4
Dielectric Strength
No defects or abnormalities
5
Insulation Resistance
(I.R.)
More than 10,000MΩ
6
Capacitance
Within the specified tolerance
7
Q
1,000 min.
Capacitance
Temperature
Characteristics
Temp. Coefficient
C0G char. :
0±30ppm/°C (Temp. Range : +25 to +125°C)
0+30, –72ppm/°C (Temp. Range : –55 to +25°C)
U2J char. :
–750±120ppm/°C (Temp. Range : +25 to +125°C)
–750+120, –347ppm/°C (Temp. Range : –55 to +25°C)
8
9
Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
Rated Voltage
DC250V
DC630V
DC1kV, DC2kV,
DC3.15kV
Test Voltage
200% of the rated voltage
150% of the rated voltage
130% of the rated voltage
The insulation resistance should be measured with DC500±50V
(DC250±25V in case of rated voltage: DC250V) and within 60±5
sec. of charging.
The capacitance/Q should be measured at the frequency and
voltage shown as follows.
Capacitance
CF1,000pF
CU1,000pF
Frequency
1±0.2MHz
1±0.2kHz
Voltage
AC0.5 to 5V(r.m.s.)
AC1±0.2V(r.m.s.)
The capacitance measurement should be made at each step
specified in the Table.
Step
1
2
3
4
5
Temperature (°C)
25±2
Min. Operating Temp.±3
25±2
Max. Operating Temp.±2
25±2
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
10N, 10±1s
Glass Epoxy Board
Fig. 1
10
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
Q
1,000 min.
Vibration
Resistance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Solder resist
Cu
Glass Epoxy Board
Continued on the following page.
141
Only for Applications
1
For General Purpose
GRM/GRJ/GR3 Series
Test Method
AC250V Type
GA2 Series
Specifications
Safety Standard
Certified GA3 Series
Item
Product Information
No.
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Specifications and Test Methods
Continued from the preceding page.
No.
-«iVˆvˆV>̈œ˜Ã
Item
/iÃÌÊiÌ œ`
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
b
ø4.5
d
c
40
For General Purpose
GRM/GRJ/GR3 Series
No marking defects
a
100
11 Deflection
Only for Applications
AC250V Type
GA2 Series
Solderability of
Termination
a
1.2
2.2
2.2
3.5
3.5
4.5
ˆ“i˜Ãˆœ˜Ê­““®
b
c
4.0
1.65
5.0
2.0
5.0
2.9
7.0
2.4
7.0
3.7
8.0
5.6
75% of the terminations are to be soldered evenly
and continuously.
Appearance
No marking defects
Capacitance
Change
Within ±2.5%
Safety Standard
Certified GA3 Series
,iÈÃÌ>˜ViÊ
13 to Soldering Q
Heat
I.R.
Product Information
14
20 50 Pressurizing
speed: 1.0mm/s
Pressurize
Fig. 2
LZW
(mm)
2.0Z1.25
3.2Z1.6
3.2Z2.5
4.5Z2.0
4.5Z3.2
5.7Z5.0
12
t : 1.6
R230
d
Flexure=1
Capacitance meter
45
(in mm)
45
1.0
Fig. 3
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in
solder solution for 2±0.5 sec.
Immersing speed: 25±2.5mm/s
Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235±5°C H60A or H63A Eutectic Solder
Preheat the capacitor at 120 to 150°C* for 1 min.
Immerse the capacitor in solder solution at 260±5°C for 10±1 sec.
Let sit at room condition* for 24±2 hrs., then measure.
U““iÀȘ}Êëii`: 25±2.5mm/s
1,000 min.
More than 10,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within ±2.5%
Q
500 min.
I.R.
More than 10,000MΩ
Dielectric
Strength
In accordance with item No.4
Temperature
Cycle
*Preheating for more than 3.2Z2.5mm
Step
1
2
Temperature
100 to 120°C
170 to 200°C
Time
1 min.
1 min.
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24±2 hrs. at room condition,* then measure.
Step
1
2
3
4
Temperature (°C)
Min. Operating Temp.±3
Room Temp.
Max. Operating Temp.±2
Room Temp.
Time (min.)
30±3
2 to 3
30±3
2 to 3
Solder resist
Cu
Glass Epoxy Board
Fig. 4
Humidity
15 (Steady
State)
16 Life
Appearance
No marking defects
Capacitance
Change
Within ±5.0%
Q
350 min.
I.R.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within ±3.0%
Q
350 min.
I.R.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%
for 500W24
Y 0 hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
Apply voltage as in Table for 1,000W48
Y 0hrs. at maximum
operating temperature ±3°C.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
Rated Voltage
DC250V
DC630V, DC1kV,
DC2kV, DC3.15kV
120% of the rated voltage
The charge/discharge current is less than 50mA.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
142
Applied Voltage
150% of the rated voltage
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors (Medium Voltage)
g
e
c Features
T
1. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
2. Sn-plated external electrodes provide good
solderability.
3. Use the GRM18/21/31 types with flow or reflow
soldering, and other types with reflow soldering
only.
L
Part Number
GRM188
GRM21A
GRM21B
GRM31B
GRM31C
GRM32Q
GRM32D
GRM43Q
GRM43D
GRM55D
c Applications
L
W
Dimensions (mm)
W
T
1.6 ±0.1 0.8 ±0.1
2.0 ±0.2 1.25 ±0.2
3.2 ±0.2
1.6 ±0.2
3.2 ±0.3
2.5 ±0.2
4.5 ±0.4
3.2 ±0.3
5.7 ±0.4
5.0 ±0.4
g min.
e
0.2 to 0.5
0.8 ±0.1
1.0 +0,-0.3
1.25 ±0.2
1.25 +0,-0.3
1.6 ±0.2
1.5 +0,-0.3 0.3 min.
2.0 +0,-0.3
1.5 +0,-0.3
2.0 +0,-0.3
2.0 +0,-0.3
0.4
0.7
1.2
2.2
3.2
AC250V Type
GA2 Series
1. Ideal for use on clamp-snubber circuits for
switching power supplies.
2. Ideal for use as primary-secondary coupling for
DC-DC converters.
3. Ideal for use on line filters and ringer detectors
for telephones, facsimiles and modems.
Only for Applications
e
For General Purpose
GRM/GRJ/GR3 Series
High Dielectric Constant Type GRM Series (250Vdc min.)
Part Number
Rated Voltage
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GRM188R72E221KW07D
250Vdc
X7R (EIA)
220pF±10%
1.6
0.8
0.9
0.4mm
0.2 to 0.5mm
GRM188R72E331KW07D
250Vdc
X7R (EIA)
330pF±10%
1.6
0.8
0.9
0.4mm
0.2 to 0.5mm
GRM188R72E471KW07D
250Vdc
X7R (EIA)
470pF±10%
1.6
0.8
0.9
0.4mm
0.2 to 0.5mm
GRM188R72E681KW07D
250Vdc
X7R (EIA)
680pF±10%
1.6
0.8
0.9
0.4mm
0.2 to 0.5mm
GRM188R72E102KW07D
250Vdc
X7R (EIA)
1000pF±10%
1.6
0.8
0.9
0.4mm
0.2 to 0.5mm
GRM21AR72E102KW01D
250Vdc
X7R (EIA)
1000pF±10%
2
1.25
1
0.7mm
0.3mm min.
GRM188R72E152KW07D
250Vdc
X7R (EIA)
1500pF±10%
1.6
0.8
0.9
0.4mm
0.2 to 0.5mm
GRM21AR72E152KW01D
250Vdc
X7R (EIA)
1500pF±10%
2
1.25
1
0.7mm
0.3mm min.
GRM188R72E222KW07D
250Vdc
X7R (EIA)
2200pF±10%
1.6
0.8
0.9
0.4mm
0.2 to 0.5mm
GRM21AR72E222KW01D
250Vdc
X7R (EIA)
2200pF±10%
2
1.25
1
0.7mm
0.3mm min.
GRM21AR72E332KW01D
250Vdc
X7R (EIA)
3300pF±10%
2
1.25
1
0.7mm
0.3mm min.
GRM21AR72E472KW01D
250Vdc
X7R (EIA)
4700pF±10%
2
1.25
1
0.7mm
0.3mm min.
GRM21AR72E682KW01D
250Vdc
X7R (EIA)
6800pF±10%
2
1.25
1
0.7mm
0.3mm min.
GRM21BR72E103KW03L
250Vdc
X7R (EIA)
10000pF±10%
2
1.25
1.45
0.7mm
0.3mm min.
GRM31BR72E153KW01L
250Vdc
X7R (EIA)
15000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM31BR72E223KW01L
250Vdc
X7R (EIA)
22000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM31CR72E333KW03L
250Vdc
X7R (EIA)
33000pF±10%
3.2
1.6
1.8
1.2mm
0.3mm min.
GRM31CR72E473KW03L
250Vdc
X7R (EIA)
47000pF±10%
3.2
1.6
1.8
1.2mm
0.3mm min.
GRM31BR72E683KW01L
250Vdc
X7R (EIA)
68000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM32QR72E683KW01L
250Vdc
X7R (EIA)
68000pF±10%
3.2
2.5
1.5
1.2mm
0.3mm min.
GRM31CR72E104KW03L
250Vdc
X7R (EIA)
0.10µF±10%
3.2
1.6
1.8
1.2mm
0.3mm min.
GRM32DR72E104KW01L
250Vdc
X7R (EIA)
0.10µF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GRM32QR72E154KW01L
250Vdc
X7R (EIA)
0.15µF±10%
3.2
2.5
1.5
1.2mm
0.3mm min.
GRM43QR72E154KW01L
250Vdc
X7R (EIA)
0.15µF±10%
4.5
3.2
1.5
2.2mm
0.3mm min.
GRM32DR72E224KW01L
250Vdc
X7R (EIA)
0.22µF±10%
3.2
2.5
2
1.2mm
0.3mm min.
Continued on the following page.
143
Product Information
Safety Standard
Certified GA3 Series
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Continued from the preceding page.
Rated Voltage
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GRM43DR72E224KW01L
250Vdc
X7R (EIA)
0.22µF±10%
4.5
3.2
2
2.2mm
0.3mm min.
GRM43DR72E334KW01L
250Vdc
X7R (EIA)
0.33µF±10%
4.5
3.2
2
2.2mm
0.3mm min.
GRM55DR72E334KW01L
250Vdc
X7R (EIA)
0.33µF±10%
5.7
5.0
2
3.2mm
0.3mm min.
For General Purpose
GRM/GRJ/GR3 Series
GRM43DR72E474KW01L
250Vdc
X7R (EIA)
0.47µF±10%
4.5
3.2
2
2.2mm
0.3mm min.
GRM55DR72E474KW01L
250Vdc
X7R (EIA)
0.47µF±10%
5.7
5.0
2
3.2mm
0.3mm min.
GRM55DR72E684KW01L
250Vdc
X7R (EIA)
0.68µF±10%
5.7
5.0
2
3.2mm
0.3mm min.
GRM55DR72E105KW01L
250Vdc
X7R (EIA)
1.0µF±10%
5.7
5.0
2
3.2mm
0.3mm min.
GRM31BR72J102KW01L
630Vdc
X7R (EIA)
1000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM31BR72J152KW01L
630Vdc
X7R (EIA)
1500pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM31BR72J222KW01L
630Vdc
X7R (EIA)
2200pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
Only for Applications
GRM31BR72J332KW01L
630Vdc
X7R (EIA)
3300pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM31BR72J472KW01L
630Vdc
X7R (EIA)
4700pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM31BR72J682KW01L
630Vdc
X7R (EIA)
6800pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM31BR72J103KW01L
630Vdc
X7R (EIA)
10000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM31CR72J153KW03L
630Vdc
X7R (EIA)
15000pF±10%
3.2
1.6
1.8
1.2mm
0.3mm min.
GRM32QR72J223KW01L
630Vdc
X7R (EIA)
22000pF±10%
3.2
2.5
1.5
1.2mm
0.3mm min.
GRM32DR72J333KW01L
630Vdc
X7R (EIA)
33000pF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GRM32DR72J473KW01L
630Vdc
X7R (EIA)
47000pF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GRM43QR72J683KW01L
630Vdc
X7R (EIA)
68000pF±10%
4.5
3.2
1.5
2.2mm
0.3mm min.
GRM43DR72J104KW01L
630Vdc
X7R (EIA)
0.10µF±10%
4.5
3.2
2
2.2mm
0.3mm min.
GRM55DR72J154KW01L
630Vdc
X7R (EIA)
0.15µF±10%
5.7
5.0
2
3.2mm
0.3mm min.
GRM55DR72J224KW01L
630Vdc
X7R (EIA)
0.22µF±10%
5.7
5.0
2
3.2mm
0.3mm min.
GRM31BR73A471KW01L
1000Vdc
X7R (EIA)
470pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM31BR73A681KW01L
1000Vdc
X7R (EIA)
680pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM31BR73A102KW01L
1000Vdc
X7R (EIA)
1000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM31BR73A152KW01L
1000Vdc
X7R (EIA)
1500pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM31BR73A222KW01L
1000Vdc
X7R (EIA)
2200pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM31BR73A332KW01L
1000Vdc
X7R (EIA)
3300pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM31BR73A472KW01L
1000Vdc
X7R (EIA)
4700pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRM32QR73A682KW01L
1000Vdc
X7R (EIA)
6800pF±10%
3.2
2.5
1.5
1.2mm
0.3mm min.
GRM32QR73A103KW01L
1000Vdc
X7R (EIA)
10000pF±10%
3.2
2.5
1.5
1.2mm
0.3mm min.
GRM32DR73A153KW01L
1000Vdc
X7R (EIA)
15000pF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GRM32DR73A223KW01L
1000Vdc
X7R (EIA)
22000pF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GRM43DR73A333KW01L
1000Vdc
X7R (EIA)
33000pF±10%
4.5
3.2
2
2.2mm
0.3mm min.
GRM43DR73A473KW01L
1000Vdc
X7R (EIA)
47000pF±10%
4.5
3.2
2
2.2mm
0.3mm min.
GRM55DR73A683KW01L
1000Vdc
X7R (EIA)
68000pF±10%
5.7
5.0
2
3.2mm
0.3mm min.
GRM55DR73A104KW01L
1000Vdc
X7R (EIA)
0.10µF±10%
5.7
5.0
2
3.2mm
0.3mm min.
AC250V Type
GA2 Series
Part Number
Safety Standard
Certified GA3 Series
Product Information
144
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Specifications and Test Methods
Specifications
Test Method
1
Operating
Temperature Range
–55 to +125°C
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimensions
Using calipers and micrometers
–
4
Dielectric Strength
No defects or abnormalities
No failure should be observed when 150% of the rated voltage
(200% of the rated voltage in case of rated voltage: DC250V,
120% of the rated voltage in case of rated voltage: DC1kV) is
applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
5
Insulation Resistance
(I.R.)
CU0.01μF: More than 100MΩ s —&
CF0.01μF: More than 10,000MΩ
The insulation resistance should be measured with DC500±50V
(DC250±25V in case of rated voltage: DC250V) and within 60±5
sec. of charging.
6
Capacitance
Within the specified tolerance
7
Dissipation
Factor (D.F.)
0.025 max.
The capacitance/D.F. should be measured at a frequency of
1±0.2kHz and a voltage of AC1±0.2V(r.m.s.).
For General Purpose
GRM/GRJ/GR3 Series
Item
Only for Applications
No.
The capacitance measurement should be made at each step
specified in the Table.
Cap. Change
Within ±15%
(Temp. Range: –55 to +125°C)
AC250V Type
GA2 Series
Capacitance
Temperature
Characteristics
Temperature (°C)
25±2
Min. Operating Temp.±3
25±2
Max. Operating Temp.±2
25±2
U*ÀiÌÀi>̓i˜Ì
Perform a heat treatment at 150+0
–10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
9
Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
Safety Standard
Certified GA3 Series
8
Step
1
2
3
4
5
Glass Epoxy Board
Fig. 1
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
10
Vibration
Resistance
D.F.
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
0.025 max.
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
145
Product Information
10N (5N : Size 1.6g0.8mm only), 10±1s
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM Series Specifications and Test Methods
Continued from the preceding page.
ϡ
Ìi“
-«iVˆvˆV>̈œ˜Ã
/iÃÌÊiÌ œ`
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
b
ø4.5
d
c
40
For General Purpose
GRM/GRJ/GR3 Series
No marking defects
a
100
11
iviV̈œ˜
20 50 Pressurizing
speed: 1.0mm/s
Pressurize
t : 1.6
Fig. 2
Only for Applications
LZW
­““®
1.6Z0.8
2.0Z1.25
3.2Z1.6
3.2Z2.5
4.5Z3.2
5.7Z5.0
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
-œ`iÀ>LˆˆÌÞʜvÊ
/iÀ“ˆ˜>̈œ˜
12
D.F.
,iÈÃÌ>˜ViÊ
13 ̜Ê-œ`iÀˆ˜}Ê I.R.
i>Ì
>
1.0
1.2
2.2
2.2
3.5
4.5
ˆ“i˜Ãˆœ˜Ê­““®
L
V
3.0
1.2
4.0
1.65
5.0
2.0
5.0
2.9
7.0
3.7
8.0
5.6
R230
Capacitance meter
45
>«>VˆÌ>˜ViÊ
Within ±10%
>˜}i
0.025 max.
CU0.01μF: More than 100MΩ s —&
CF0.01μF: More than 10,000MΩ
45
(in mm)
1.0
75% of the terminations are to be soldered evenly and continuously.
««i>À>˜Vi No marking defects
Flexure=1
`
Fig. 3
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2±0.5 sec.
Immersing speed: 25±2.5mm/s
Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235±5°C H60A or H63A Eutectic Solder
Preheat the capacitor at 120 to 150°C* for 1 min.
Immerse the capacitor in solder solution at 260±5°C for 10±1
sec. Let sit at room condition* for 24±2 hrs., then measure.
U““iÀȘ}Êëii`\Ê25±2.5mm/s
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150+
–10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
*Preheating for more than 3.2Z2.5mm
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
««i>À>˜Vi No marking defects
Product Information
>«>VˆÌ>˜ViÊ
Within ±7.5%
>˜}i
14
D.F.
0.025 max.
I.R.
CU0.01μF: More than 100MΩ s —&
CF0.01μF: More than 10,000MΩ
/i“«iÀ>ÌÕÀiÊ
ÞVi
-Ìi«
1
2
/i“«iÀ>ÌÕÀi
100 to 120°C
170 to 200°C
/ˆ“i
1 min.
1 min.
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24±2 hrs. at room condition,* then measure.
-Ìi«
1
2
3
4
/i“«iÀ>ÌÕÀiÊ­c ®
Min. Operating Temp.±3
Room Temp.
Max. Operating Temp.±2
Room Temp.
/ˆ“iÊ­“ˆ˜°®
30±3
2 to 3
30±3
2 to 3
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150+
–10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
Solder resist
Cu
Glass Epoxy Board
Fig. 4
««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
Within ±15%
>˜}i
Փˆ`ˆÌÞÊ
D.F.
15 ­-Ìi>`ÞÊ
-Ì>Ìi®
I.R.
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
0.05 max.
CU0.01μF: More than 10MΩ s —&
CF0.01μF: More than 1,000MΩ
Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%
for 500+24
– 0hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150+
–10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
In accordance with item No.4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
146
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Oct.1,2012
GRM Series Specifications and Test Methods
Continued from the preceding page.
-«iVˆvˆV>̈œ˜Ã
««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ Within ±15% (rated voltage: DC250V, DC630V)
>˜}i
Within ±20% (rated voltage: DC1kV)
16 ˆvi
D.F.
0.05 max.
I.R.
CU0.01μF: More than 10MΩ s —&
CF0.01μF: More than 1,000MΩ
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
/iÃÌÊiÌ œ`
Apply 120% of the rated voltage (150% of the rated voltage in
case of rated voltage: DC250V, 110% of the rated voltage in case
+48
of rated voltage: DC1kV) for 1,000–
0hrs. at maximum
operating temperature ±3°C. Remove and let sit for 24±2hrs. at
room condition,* then measure.
The charge/discharge current is less than 50mA.
U*ÀiÌÀi>̓i˜Ì
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
Within ±15%
>˜}i
D.F.
0.05 max.
I.R.
CU0.01μF: More than 10MΩ s —&
CF0.01μF: More than 1,000MΩ
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
Apply the rated voltage at 40±2°C and relative humidity of 90 to
+24
95% for 500–
0hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>̓i˜Ì
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
AC250V Type
GA2 Series
Փˆ`ˆÌÞÊ
œ>`ˆ˜}Ê
­««ˆV>̈œ˜\Ê
17
Óxä6]Ê
ÈÎä6Ê
ˆÌi“®
For General Purpose
GRM/GRJ/GR3 Series
Ìi“
Only for Applications
No.
Product Information
Safety Standard
Certified GA3 Series
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
147
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors (Medium Voltage)
Deflecting
crack
Soft Termination Type GRJ Series
g
e
c Features
Only for Applications
1. Improves endurance against Board Bending Stress.
2. Reduces the board bending stress by the conductive
polymer termination.
3. Use the GRJ21/31 types with flow or reflow
soldering, and other types with reflow soldering
only.
T
For General Purpose
GRM/GRJ/GR3 Series
e
L
Part Number
GRJ21A
GRJ21B
GRJ31B
GRJ31C
GRJ32Q
GRJ32D
GRJ43Q
GRJ43D
GRJ55D
c Applications
AC250V Type
GA2 Series
1. Ideal for use on clamp-snubber circuits for
switching power supplies.
2. Ideal for use as primary-secondary coupling for
DC-DC converters.
3. Ideal for use on line filters and ringer detectors
for telephones, facsimiles and modems.
L
2.0 ±0.2
3.2 ±0.2
3.2 ±0.3
4.5 ±0.4
5.7 ±0.4
W
Dimensions (mm)
e
W
T
1.0 +0,-0.3
1.25 ±0.2
1.25 ±0.2
1.25 +0,-0.3
1.6 ±0.2
1.6 ±0.2
1.5 +0,-0.3
0.3 min.
2.5 ±0.2
2.0 +0,-0.3
1.5 +0,-0.3
3.2 ±0.3
2.0 +0,-0.3
2.0 +0,-0.3
5.0 ±0.4
g min.
0.7
1.2
2.2
3.2
Safety Standard
Certified GA3 Series
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Product Information
Rated Voltage
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GRJ21AR72E102KWJ1D
250Vdc
X7R (EIA)
1000pF±10%
2
1.25
1
0.7mm
0.3mm min.
GRJ21AR72E152KWJ1D
250Vdc
X7R (EIA)
1500pF±10%
2
1.25
1
0.7mm
0.3mm min.
GRJ21AR72E222KWJ1D
250Vdc
X7R (EIA)
2200pF±10%
2
1.25
1
0.7mm
0.3mm min.
GRJ21AR72E332KWJ1D
250Vdc
X7R (EIA)
3300pF±10%
2
1.25
1
0.7mm
0.3mm min.
GRJ21AR72E472KWJ1D
250Vdc
X7R (EIA)
4700pF±10%
2
1.25
1
0.7mm
0.3mm min.
GRJ21AR72E682KWJ1D
250Vdc
X7R (EIA)
6800pF±10%
2
1.25
1
0.7mm
0.3mm min.
GRJ21BR72E103KWJ3L
250Vdc
X7R (EIA)
10000pF±10%
2
1.25
1.45
0.7mm
0.3mm min.
GRJ21BR72E153KWJ3L
250Vdc
X7R (EIA)
15000pF±10%
2
1.25
1.45
0.7mm
0.3mm min.
GRJ31BR72E153KWJ1L
250Vdc
X7R (EIA)
15000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ21BR72E223KWJ3L
250Vdc
X7R (EIA)
22000pF±10%
2
1.25
1.45
0.7mm
0.3mm min.
GRJ31BR72E223KWJ1L
250Vdc
X7R (EIA)
22000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ31CR72E333KWJ3L
250Vdc
X7R (EIA)
33000pF±10%
3.2
1.6
1.8
1.2mm
0.3mm min.
GRJ31CR72E473KWJ3L
250Vdc
X7R (EIA)
47000pF±10%
3.2
1.6
1.8
1.2mm
0.3mm min.
GRJ31BR72E683KWJ1L
250Vdc
X7R (EIA)
68000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ32QR72E683KWJ1L
250Vdc
X7R (EIA)
68000pF±10%
3.2
2.5
1.5
1.2mm
0.3mm min.
GRJ31CR72E104KWJ3L
250Vdc
X7R (EIA)
0.10µF±10%
3.2
1.6
1.8
1.2mm
0.3mm min.
GRJ32DR72E104KWJ1L
250Vdc
X7R (EIA)
0.10µF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GRJ32QR72E154KWJ1L
250Vdc
X7R (EIA)
0.15µF±10%
3.2
2.5
1.5
1.2mm
0.3mm min.
GRJ43QR72E154KWJ1L
250Vdc
X7R (EIA)
0.15µF±10%
4.5
3.2
1.5
2.2mm
0.3mm min.
GRJ32DR72E224KWJ1L
250Vdc
X7R (EIA)
0.22µF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GRJ43DR72E224KWJ1L
250Vdc
X7R (EIA)
0.22µF±10%
4.5
3.2
2
2.2mm
0.3mm min.
GRJ43DR72E334KWJ1L
250Vdc
X7R (EIA)
0.33µF±10%
4.5
3.2
2
2.2mm
0.3mm min.
GRJ55DR72E334KWJ1L
250Vdc
X7R (EIA)
0.33µF±10%
5.7
5
2
3.2mm
0.3mm min.
GRJ43DR72E474KWJ1L
250Vdc
X7R (EIA)
0.47µF±10%
4.5
3.2
2
2.2mm
0.3mm min.
GRJ55DR72E474KWJ1L
250Vdc
X7R (EIA)
0.47µF±10%
5.7
5
2
3.2mm
0.3mm min.
GRJ55DR72E684KWJ1L
250Vdc
X7R (EIA)
0.68µF±10%
5.7
5
2
3.2mm
0.3mm min.
GRJ55DR72E105KWJ1L
250Vdc
X7R (EIA)
1.0µF±10%
5.7
5
2
3.2mm
0.3mm min.
Part Number
Continued on the following page.
148
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GRJ31BR72J102KWJ1L
630Vdc
X7R (EIA)
1000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ31BR72J152KWJ1L
630Vdc
X7R (EIA)
1500pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ31BR72J222KWJ1L
630Vdc
X7R (EIA)
2200pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ31BR72J332KWJ1L
630Vdc
X7R (EIA)
3300pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ31BR72J472KWJ1L
630Vdc
X7R (EIA)
4700pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ31BR72J682KWJ1L
630Vdc
X7R (EIA)
6800pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ31BR72J103KWJ1L
630Vdc
X7R (EIA)
10000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ31CR72J153KWJ3L
630Vdc
X7R (EIA)
15000pF±10%
3.2
1.6
1.8
1.2mm
0.3mm min.
GRJ31CR72J223KWJ3L
630Vdc
X7R (EIA)
22000pF±10%
3.2
1.6
1.8
1.2mm
0.3mm min.
GRJ32QR72J223KWJ1L
630Vdc
X7R (EIA)
22000pF±10%
3.2
2.5
1.5
1.2mm
0.3mm min.
GRJ32DR72J333KWJ1L
630Vdc
X7R (EIA)
33000pF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GRJ32DR72J473KWJ1L
630Vdc
X7R (EIA)
47000pF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GRJ43QR72J683KWJ1L
630Vdc
X7R (EIA)
68000pF±10%
4.5
3.2
1.5
2.2mm
0.3mm min.
GRJ43DR72J104KWJ1L
630Vdc
X7R (EIA)
0.10µF±10%
4.5
3.2
2
2.2mm
0.3mm min.
GRJ55DR72J154KWJ1L
630Vdc
X7R (EIA)
0.15µF±10%
5.7
5
2
3.2mm
0.3mm min.
GRJ55DR72J224KWJ1L
630Vdc
X7R (EIA)
0.22µF±10%
5.7
5
2
3.2mm
0.3mm min.
GRJ31BR73A471KWJ1L
1000Vdc
X7R (EIA)
470pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ31BR73A681KWJ1L
1000Vdc
X7R (EIA)
680pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ31BR73A102KWJ1L
1000Vdc
X7R (EIA)
1000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ31BR73A152KWJ1L
1000Vdc
X7R (EIA)
1500pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ31BR73A222KWJ1L
1000Vdc
X7R (EIA)
2200pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ31BR73A332KWJ1L
1000Vdc
X7R (EIA)
3300pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ31BR73A472KWJ1L
1000Vdc
X7R (EIA)
4700pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GRJ31CR73A682KWJ3L
1000Vdc
X7R (EIA)
6800pF±10%
3.2
1.6
1.8
1.2mm
0.3mm min.
GRJ32QR73A682KWJ1L
1000Vdc
X7R (EIA)
6800pF±10%
3.2
2.5
1.5
1.2mm
0.3mm min.
GRJ31CR73A103KWJ3L
1000Vdc
X7R (EIA)
10000pF±10%
3.2
1.6
1.8
1.2mm
0.3mm min.
GRJ32QR73A103KWJ1L
1000Vdc
X7R (EIA)
10000pF±10%
3.2
2.5
1.5
1.2mm
0.3mm min.
GRJ32DR73A153KWJ1L
1000Vdc
X7R (EIA)
15000pF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GRJ32DR73A223KWJ1L
1000Vdc
X7R (EIA)
22000pF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GRJ43DR73A333KWJ1L
1000Vdc
X7R (EIA)
33000pF±10%
4.5
3.2
2
2.2mm
0.3mm min.
GRJ43DR73A473KWJ1L
1000Vdc
X7R (EIA)
47000pF±10%
4.5
3.2
2
2.2mm
0.3mm min.
GRJ55DR73A683KWJ1L
1000Vdc
X7R (EIA)
68000pF±10%
5.7
5
2
3.2mm
0.3mm min.
GRJ55DR73A104KWJ1L
1000Vdc
X7R (EIA)
0.10µF±10%
5.7
5
2
3.2mm
0.3mm min.
149
Only for Applications
Length L
(mm)
AC250V Type
GA2 Series
Capacitance
Safety Standard
Certified GA3 Series
TC Code
(Standard)
Product Information
Rated Voltage
Part Number
For General Purpose
GRM/GRJ/GR3 Series
Continued from the preceding page.
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRJ Series Specifications and Test Methods
For General Purpose
GRM/GRJ/GR3 Series
No.
Item
Specifications
Test Method
1
Operating
Temperature Range
–55 to +125°C
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimensions
Using calipers and micrometers
–
No failure should be observed when voltage in the Table is
applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
Only for Applications
4
Dielectric Strength
No defects or abnormalities
5
Insulation Resistance
(I.R.)
CU0.01μF: More than 100MΩ s —&
CF0.01μF: More than 10,000MΩ
6
Capacitance
Within the specified tolerance
7
Dissipation
Factor (D.F.)
0.025 max.
Rated Voltage
DC250V
DC630V
DC1kV
Test Voltage
200% of the rated voltage
150% of the rated voltage
120% of the rated voltage
The insulation resistance should be measured with DC500±50V
(DC250±25V in case of rated voltage: DC250V) and within 60±5
sec. of charging.
The capacitance/D.F. should be measured at a frequency of
1±0.2kHz and a voltage of AC1±0.2V(r.m.s.).
AC250V Type
GA2 Series
The capacitance measurement should be made at each step
specified in the Table.
8
Capacitance
Temperature
Characteristics
Cap. Change
Within ±15%
(Temp. Range: –55 to +125°C)
Step
1
2
3
4
5
Temperature (°C)
25±2
Min. Operating Temp.±3
25±2
Max. Operating Temp.±2
25±2
Safety Standard
Certified GA3 Series
U*ÀiÌÀi>̓i˜Ì
Perform a heat treatment at 150+0
–10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
Product Information
9
Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
10N, 10±1s
Glass Epoxy Board
Fig. 1
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
10
Vibration
Resistance
D.F.
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
0.025 max.
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
150
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRJ Series Specifications and Test Methods
Continued from the preceding page.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
>«>VˆÌ>˜ViÊ
Within ±12.5%
>˜}i
b
ø4.5
d
11
20 50 Pressurizing
speed: 1.0mm/s
Pressurize
40
c
a
iviV̈œ˜
R230
t : 1.6
100
Fig. 2
LZW
­““®
2.0Z1.25
3.2Z1.6
3.2Z2.5
4.5Z3.2
5.7Z5.0
12
-œ`iÀ>LˆˆÌÞʜvÊ
/iÀ“ˆ˜>̈œ˜
>
1.2
2.2
2.2
3.5
4.5
ˆ“i˜Ãˆœ˜Ê­““®
L
V
4.0
1.65
5.0
2.0
5.0
2.9
7.0
3.7
8.0
5.6
`
>«>VˆÌ>˜ViÊ
Within ±10%
>˜}i
0.025 max.
CU0.01μF: More than 100MΩ s —&
CF0.01μF: More than 10,000MΩ
45
45
(in mm)
Fig. 3
1.0
75% of the terminations are to be soldered evenly and continuously.
««i>À>˜Vi No marking defects
D.F.
,iÈÃÌ>˜ViÊ
13 ̜Ê-œ`iÀˆ˜}Ê I.R.
i>Ì
Flexure=3 (2mm for 2.0x1.25mm)
Capacitance meter
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2±0.5 sec.
Immersing speed: 25±2.5mm/s
Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235±5°C H60A or H63A Eutectic Solder
Preheat the capacitor at 120 to 150°C* for 1 min.
Immerse the capacitor in solder solution at 260±5°C for 10±1
sec. Let sit at room condition* for 24±2 hrs., then measure.
U““iÀȘ}Êëii`\Ê25±2.5mm/s
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150+
–10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
*Preheating for more than 3.2Z2.5mm
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
Within ±7.5%
>˜}i
14
D.F.
0.025 max.
I.R.
CU0.01μF: More than 100MΩ s —&
CF0.01μF: More than 10,000MΩ
/i“«iÀ>ÌÕÀiÊ
ÞVi
-Ìi«
1
2
/i“«iÀ>ÌÕÀi
100 to 120°C
170 to 200°C
/ˆ“i
1 min.
1 min.
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24±2 hrs. at room condition,* then measure.
-Ìi«
1
2
3
4
/i“«iÀ>ÌÕÀiÊ­c ®
Min. Operating Temp.±3
Room Temp.
Max. Operating Temp.±2
Room Temp.
/ˆ“iÊ­“ˆ˜°®
30±3
2 to 3
30±3
2 to 3
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150+
–10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
Solder resist
Cu
Glass Epoxy Board
Fig. 4
««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
Within ±15%
>˜}i
Փˆ`ˆÌÞÊ
D.F.
15 ­-Ìi>`ÞÊ
-Ì>Ìi®
I.R.
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
0.05 max.
CU0.01μF: More than 10MΩ s —&
CF0.01μF: More than 1,000MΩ
Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%
for 500+24
– 0hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150+
–10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
In accordance with item No.4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
151
Only for Applications
««i>À>˜Vi No marking defects
For General Purpose
GRM/GRJ/GR3 Series
/iÃÌÊiÌ œ`
AC250V Type
GA2 Series
-«iVˆvˆV>̈œ˜Ã
Safety Standard
Certified GA3 Series
Ìi“
Product Information
ϡ
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
GRJ Series Specifications and Test Methods
Continued from the preceding page.
No.
Ìi“
-«iVˆvˆV>̈œ˜Ã
For General Purpose
GRM/GRJ/GR3 Series
««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ Within ±15% (rated voltage: DC250V, DC630V)
>˜}i
Within ±20% (rated voltage: DC1kV)
16 ˆvi
D.F.
0.05 max.
I.R.
CU0.01μF: More than 10MΩ s —&
CF0.01μF: More than 1,000MΩ
Only for Applications
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
/iÃÌÊiÌ œ`
Apply voltage as in Table for 1,000+48
– 0hrs. at maximum
operating temperature ±3°C. Remove and let sit for 24±2 hrs. at
room condition,* then measure.
,>Ìi`Ê6œÌ>}i
DC250V
DC630V
DC1kV
««ˆi`Ê6œÌ>}i
150% of the rated voltage
120% of the rated voltage
110% of the rated voltage
The charge/discharge current is less than 50mA.
U*ÀiÌÀi>̓i˜Ì
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
««i>À>˜Vi No marking defects
Փˆ`ˆÌÞÊ
œ>`ˆ˜}Ê
­««ˆV>̈œ˜\Ê
17
Óxä6]Ê
ÈÎä6Ê
ˆÌi“®
>«>VˆÌ>˜ViÊ
Within ±15%
>˜}i
AC250V Type
GA2 Series
D.F.
0.05 max.
I.R.
CU0.01μF: More than 10MΩ s —&
CF0.01μF: More than 1,000MΩ
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
Apply the rated voltage at 40±2°C and relative humidity of 90 to
+24
95% for 500–
0hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>̓i˜Ì
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Safety Standard
Certified GA3 Series
Product Information
152
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors (Medium Voltage)
g
e
1. This series can provide higher capacitance value under
DC-Bias condition, compare with previous X7R char.
2. Improve the performance of ripple-resistance compared
with X7R char.
3. Reduce acoustic noise.
4. High reliability for board bending stress
5. Sn-plated external electrodes provide good soldering,
and other types with reflow soldering only.
6. Use the GR321/331 types with flow or reflow soldering,
and other types with reflow soldering only.
T
c Features
L
Part Number
GR321A
GR321B
GR331A
GR331B
GR331C
GR332Q
GR332D
GR343Q
GR343D
GR355D
GR355X
L
W
Dimensions (mm)
W
T
2.0±0.2
1.25±0.2
3.2±0.2
1.6±0.2
3.2±0.3
2.5±0.2
4.5±0.4
3.2±0.3
5.7±0.4
5.0±0.4
1.0+0,-0.3
1.25±0.2
1.0+0,-0.3
1.25+0,-0.3
1.6±0.2
1.5+0,-0.3
2.0+0,-0.3
1.5+0,-0.3
2.0+0,-0.3
2.0+0,-0.3
2.7+0,-0.3
g min.
e
0.7
1.2
0.3 min.
2.2
3.2
AC250V Type
GA2 Series
c Applications
1. DC smoothing & EMI filiter for LED Lighting.
2. For PFC circuit in the swiching power supplies,
AC adaptor.
3. DC-DC converter for general electronic equipment.
Rated Voltage
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GR321AD72E103KW01D
250Vdc
X7T (EIA)
10000pF±10%
2
1.25
1
0.7mm
0.3mm min.
GR321AD72E153KW01D
250Vdc
X7T (EIA)
15000pF±10%
2
1.25
1
0.7mm
0.3mm min.
GR321BD72E223KW03L
250Vdc
X7T (EIA)
22000pF±10%
2
1.25
1.45
0.7mm
0.3mm min.
GR331AD72E333KW01D
250Vdc
X7T (EIA)
33000pF±10%
3.2
1.6
1
1.2mm
0.3mm min.
GR331BD72E473KW01L
250Vdc
X7T (EIA)
47000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GR331CD72E683KW03L
250Vdc
X7T (EIA)
68000pF±10%
3.2
1.6
1.8
1.2mm
0.3mm min.
GR332QD72E104KW01L
250Vdc
X7T (EIA)
0.10µF±10%
3.2
2.5
1.5
1.2mm
0.3mm min.
GR332DD72E154KW01L
250Vdc
X7T (EIA)
0.15µF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GR343QD72E224KW01L
250Vdc
X7T (EIA)
0.22µF±10%
4.5
3.2
1.5
2.2mm
0.3mm min.
GR343DD72E334KW01L
250Vdc
X7T (EIA)
0.33µF±10%
4.5
3.2
2
2.2mm
0.3mm min.
GR355DD72E474KW01L
250Vdc
X7T (EIA)
0.47µF±10%
5.7
5.0
2
3.2mm
0.3mm min.
GR355DD72E684KW01L
250Vdc
X7T (EIA)
0.68µF±10%
5.7
5.0
2
3.2mm
0.3mm min.
GR355XD72E105KW05L
250Vdc
X7T (EIA)
1.0µF±10%
5.7
5.0
2.7
3.2mm
0.3mm min.
GR331AD72W103KW01D
450Vdc
X7T (EIA)
10000pF±10%
3.2
1.6
1
1.2mm
0.3mm min.
GR331AD72W153KW01D
450Vdc
X7T (EIA)
15000pF±10%
3.2
1.6
1
1.2mm
0.3mm min.
GR331BD72W223KW01L
450Vdc
X7T (EIA)
22000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GR331BD72W333KW01L
450Vdc
X7T (EIA)
33000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GR331CD72W473KW03L
450Vdc
X7T (EIA)
47000pF±10%
3.2
1.6
1.8
1.2mm
0.3mm min.
GR332DD72W683KW01L
450Vdc
X7T (EIA)
68000pF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GR332DD72W104KW01L
450Vdc
X7T (EIA)
0.10µF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GR343DD72W154KW01L
450Vdc
X7T (EIA)
0.15µF±10%
4.5
3.2
2
2.2mm
0.3mm min.
GR355DD72W224KW01L
450Vdc
X7T (EIA)
0.22µF±10%
5.7
5.0
2
3.2mm
0.3mm min.
GR355DD72W334KW01L
450Vdc
X7T (EIA)
0.33µF±10%
5.7
5.0
2
3.2mm
0.3mm min.
GR355DD72W474KW01L
450Vdc
X7T (EIA)
0.47µF±10%
5.7
5.0
2
3.2mm
0.3mm min.
GR355XD72W564KW05L
450Vdc
X7T (EIA)
0.56µF±10%
5.7
5.0
2.7
3.2mm
0.3mm min.
Continued on the following page.
153
Product Information
Safety Standard
Certified GA3 Series
Do not use these products in any Automotive
Power train or Safety equipment incliding Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
appliations such as Power train and Safety equipment.
Part Number
Only for Applications
e
For General Purpose
GRM/GRJ/GR3 Series
Antinoise
Large Capacitance and High Allowable Ripple Current GR3 Series
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Continued from the preceding page.
Rated Voltage
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
GR331BD72J103KW01L
630Vdc
X7T (EIA)
10000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
GR331CD72J153KW03L
630Vdc
X7T (EIA)
15000pF±10%
3.2
1.6
1.8
1.2mm
0.3mm min.
GR332QD72J223KW01L
630Vdc
X7T (EIA)
22000pF±10%
3.2
2.5
1.5
1.2mm
0.3mm min.
GR332DD72J333KW01L
630Vdc
X7T (EIA)
33000pF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GR332DD72J473KW01L
630Vdc
X7T (EIA)
47000pF±10%
3.2
2.5
2
1.2mm
0.3mm min.
GR343DD72J683KW01L
630Vdc
X7T (EIA)
68000pF±10%
4.5
3.2
2
2.2mm
0.3mm min.
GR355DD72J104KW01L
630Vdc
X7T (EIA)
0.1µF±10%
5.7
5.0
2
3.2mm
0.3mm min.
GR355DD72J154KW01L
630Vdc
X7T (EIA)
0.15µF±10%
5.7
5.0
2
3.2mm
0.3mm min.
GR355XD72J224KW05L
630Vdc
X7T (EIA)
0.22µF±10%
5.7
5.0
2.7
3.2mm
0.3mm min.
GR355XD72J274KW05L
630Vdc
X7T (EIA)
0.27µF±10%
5.7
5.0
2.7
3.2mm
0.3mm min.
Part Number
For General Purpose
GRM/GRJ/GR3 Series
Only for Applications
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
154
Electrode g
min.
Electrode e
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GR3 Series Specifications and Test Methods
Operating
Temperature Range
–55 to +125°C
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimensions
Using calipers and micrometers
–
No failure should be observed when voltage in Table is applied
between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
4
Dielectric Strength
No defects or abnormalities
5
Insulation Resistance
(I.R.)
More than 10,000MΩ or 100MΩ s —& 7HICHEVER IS SMALLER
6
Capacitance
Within the specified tolerance
7
Dissipation
Factor (D.F.)
0.01 max.
Rated Voltage
DC250V
DC450V
DC630V
Test Voltage
200% of the rated voltage
150% of the rated voltage
120% of the rated voltage
The insulation resistance should be measured with DC500±50V
(DC250±25V in case of rated voltage: DC250V, DC450V) and
within 60±5 sec. of charging.
The capacitance/D.F. should be measured at a frequency of
1±0.2kHz and a voltage of AC1±0.2V(r.m.s.).
The capacitance measurement should be made at each step
specified in the Table.
8
Capacitance
Temperature
Characteristics
Cap. Change
Within +22
–33%
(Temp. Range: –55 to +125°C)
Step
1
2
3
4
5
Temperature (°C)
25±2
Min. Operating Temp.±3
25±2
Max. Operating Temp.±2
25±2
U*ÀiÌÀi>̓i˜Ì
Perform a heat treatment at 150+0
–10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
9
Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
10N, 10±1s
Glass Epoxy Board
Fig. 1
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
10
Vibration
Resistance
D.F.
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
0.01 max.
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
155
Only for Applications
1
For General Purpose
GRM/GRJ/GR3 Series
Test Method
AC250V Type
GA2 Series
Specifications
Safety Standard
Certified GA3 Series
Item
Product Information
No.
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GR3 Series Specifications and Test Methods
Continued from the preceding page.
ϡ
Ìi“
-«iVˆvˆV>̈œ˜Ã
/iÃÌÊiÌ œ`
B
ø4.5
d
40
For General Purpose
GRM/GRJ/GR3 Series
3OLDER THE CAPACITOR TO THE TESTING JIG GLASS EPOXY BOARD SHOWN
IN &IG 4HEN APPLY A FORCE IN THE DIRECTION SHOWN IN &IG 4HE SOLDERING SHOULD BE DONE USING THE REFLOW METHOD AND
SHOULD BE CONDUCTED WITH CARE SO THAT THE SOLDERING IS UNIFORM
and free of defects such as heat shock.
No marking defects
c
a
11
&IG Only for Applications
LZW
­““®
2.0Z1.25
3.2Z1.6
3.2Z2.5
4.5Z3.2
5.7Z5.0
12
20 50 Pressurizing
speed : 1.0mm/s
Pressurize
t : 1.6
100
iviV̈œ˜
AC250V Type
GA2 Series
-œ`iÀ>LˆˆÌÞʜvÊ
/iÀ“ˆ˜>̈œ˜
>
1.2
2.2
2.2
3.5
4.5
ˆ“i˜Ãˆœ˜Ê­““®
L
V
4.0
1.65
5.0
2.0
5.0
2.9
7.0
3.7
8.0
5.6
R230
Capacitance meter
45
OF THE TERMINATIONS ARE TO BE SOLDERED EVENLY AND CONTINUOUSLY
>«>VˆÌ>˜ViÊ
Within ±10%
>˜}i
Safety Standard
Certified GA3 Series
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
0.01 max.
More than 10,000MΩ or 100MΩ s —& 7HICHEVER IS SMALLER
Product Information
>«>VˆÌ>˜ViÊ
Within ±7.5%
>˜}i
D.F.
0.01 max.
I.R.
More than 10,000MΩ or 100MΩ s —& 7HICHEVER IS SMALLER
/i“«iÀ>ÌÕÀiÊ
ÞVi
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
IN MM
&IG )MMERSE THE CAPACITOR IN A SOLUTION OF ETHANOL *)3 + AND
ROSIN *)3 + ROSIN IN WEIGHT PROPORTION Immerse in solder solution for 2±0.5 sec.
Immersing speed: 25±2.5mm/s
Temp. of solder: 245± # ,EAD &REE 3OLDER 3N !G #U
235± # (! OR (! %UTECTIC 3OLDER
Preheat the capacitor at 120 to 150°C* for 1 min.
Immerse the capacitor in solder solution at 260±5°C for 10±1
sec. Let sit at room condition* for 24±2 hrs., then measure.
U““iÀȘ}Êëii`\Ê25±2.5mm/s
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150+
–10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
*Preheating for more than 3.2Z2.5mm
In accordance with item No.4
««i>À>˜Vi No marking defects
14
45
1.0
««i>À>˜Vi No marking defects
D.F.
,iÈÃÌ>˜ViÊ
13 ̜Ê-œ`iÀˆ˜}Ê I.R.
i>Ì
&LEXURE MM FOR ZMM
`
-Ìi«
1
2
/i“«iÀ>ÌÕÀi
100 to 120°C
170 to 200°C
/ˆ“i
1 min.
1 min.
&IX THE CAPACITOR TO THE SUPPORTING JIG GLASS EPOXY BOARD SHOWN
IN &IG Perform the 5 cycles according to the 4 heat treatments listed in
THE FOLLOWING TABLE
Let sit for 24±2 hrs. at room condition,* then measure.
-Ìi«
1
2
3
4
/i“«iÀ>ÌÕÀiÊ­c ®
Min. Operating Temp.W0
Y3
Room Temp.
Max. Operating Temp.W2
Y0
Room Temp.
/ˆ“iÊ­“ˆ˜°®
30±3
2 to 3
30±3
2 to 3
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150+
–10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
In accordance with item No.4
3OLDER RESIST
Cu
Glass Epoxy Board
&IG ««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
Within ±12.5%
>˜}i
Փˆ`ˆÌÞÊ
15 ­-Ìi>`ÞÊ D.F.
-Ì>Ìi®
I.R.
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
0.02 max.
More than 1,000MΩ or 10MΩ s —& 7HICHEVER IS SMALLER
In accordance with item No.4
Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%
for 500+24
– 0hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150+
–10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
156
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GR3 Series Specifications and Test Methods
Continued from the preceding page.
««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
Within ±12.5%
>˜}i
16 ˆvi
D.F.
0.02 max.
I.R.
More than 1,000MΩ or 10MΩ s —& 7HICHEVER IS SMALLER
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
/iÃÌÊiÌ œ`
Apply voltage as Table for 1,000+48
– 0hrs. at maximum
operating temperature ±3°C. Remove and let sit for 24±2hrs. at
room condition,* then measure.
,>Ìi`Ê6œÌ>}i
DC250V
DC450V
DC630V
««ˆi`Ê6œÌ>}i
150% of the rated voltage
130% of the rated voltage
120% of the rated voltage
The charge/discharge current is less than 50mA.
U*ÀiÌÀi>̓i˜Ì
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
««i>À>˜Vi No marking defects
17
Փˆ`ˆÌÞÊ
D.F.
œ>`ˆ˜}Ê
I.R.
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
0.02 max.
More than 1,000MΩ or 10MΩ s —& 7HICHEVER IS SMALLER
In accordance with item No.4
Apply the rated voltage at 40±2°C and relative humidity of 90 to
+24
95% for 500–
0hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>̓i˜Ì
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
AC250V Type
GA2 Series
>«>VˆÌ>˜ViÊ
Within ±12.5%
>˜}i
For General Purpose
GRM/GRJ/GR3 Series
-«iVˆvˆV>̈œ˜Ã
Only for Applications
Ìi“
No.
Product Information
Safety Standard
Certified GA3 Series
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
157
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors (Medium Voltage)
For LCD Backlight Inverter Circuit GRM/DC3.15kV Series
e
Only for Applications
GRM/DC3.15kV Series
AC250V Type
GA2 Series
1. Low-loss and suitable for high frequency circuits
2. Murata's original internal electrode structure
realizes high flash-over voltage.
3. A new monolithic structure for small, surfacemountable devices capable of operating at high
voltage levels.
4. Sn-plated external electrodes realize good
solderability.
5. Only for reflow soldering
6. Capacitance values less than 22pF can be used in
LCD backlight inverter circuits as long as
the applied voltage, peak to peak, is less
than 4.0kV at 100kHz or less.
g
e
T
For General Purpose
GRM/GRJ/GR3 Series
c Features
L
Part Number
GRM42A
L
4.5 ±0.3
W
Dimensions (mm)
W
T
e min.
2.0 ±0.2 1.0 +0, - 0.3
0.3
g min.
2.9
c Applications
Ideal for use as the ballast in LCD backlight
inverter.
Safety Standard
Certified GA3 Series
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Product Information
Rated Voltage
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GRM42A5C3F050DW01L
3150Vdc
C0G (EIA)
5.0pF±0.5pF
4.5
2.0
1
2.9mm
0.3mm min.
GRM42A5C3F100JW01L
3150Vdc
C0G (EIA)
10pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
GRM42A5C3F120JW01L
3150Vdc
C0G (EIA)
12pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
GRM42A5C3F150JW01L
3150Vdc
C0G (EIA)
15pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
GRM42A5C3F180JW01L
3150Vdc
C0G (EIA)
18pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
GRM42A5C3F220JW01L
3150Vdc
C0G (EIA)
22pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
GRM42A5C3F270JW01L
3150Vdc
C0G (EIA)
27pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
GRM42A5C3F330JW01L
3150Vdc
C0G (EIA)
33pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
GRM42A5C3F390JW01L
3150Vdc
C0G (EIA)
39pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
GRM42A5C3F470JW01L
3150Vdc
C0G (EIA)
47pF±5%
4.5
2.0
1
2.9mm
0.3mm min.
Part Number
158
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM/DC3.15kV Series Specifications and Test Methods
1
Operating
Temperature Range
–55 to +125°C
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimension
Using calipers and micrometers
4
Dielectric Strength
No defects or abnormalities
No failure should be observed when DC4095V is applied
between the terminations for 1 to 5 sec., provided the charge/
discharge current is less than 50mA.
5
Insulation Resistance
(I.R.)
More than 10,000MΩ
The insulation resistance should be measured with DC500±50V
and within 60±5 sec. of charging.
6
Capacitance
Within the specified tolerance
7
Q
1,000 min.
–
The capacitance/Q should be measured at a frequency of
1±0.2MHz and a voltage of AC0.5 to 5V(r.m.s.).
The capacitance measurement should be made at each step
specified in the Table.
8
9
Capacitance
Temperature
Characteristics
Adhesive Strength
of Termination
Step
1
2
3
4
5
Temp. Coefficient
0±30ppm/°C (Temp. Range: +25 to +125°C)
0+30, –72ppm/°C (Temp. Range: –55 to +25°C)
No removal of the terminations or other defect should occur.
Temperature (°C)
25±2
Min. Operating Temp.±3
25±2
Max. Operating Temp.±2
25±2
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
10N, 10±1s
Glass Epoxy Board
Fig. 1
10
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
Q
1,000 min.
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Vibration
Resistance
Solder resist
Cu
Glass Epoxy Board
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
No marking defects
b
ø4.5
40
d
c
20 50 Pressurizing
speed: 1.0mm/s
Pressurize
a
11 Deflection
100
t : 1.6
R230
Fig. 2
LZW
(mm)
4.5Z2.0
a
3.5
Dimension (mm)
b
c
7.0
2.4
Flexure=1
d
1.0
Capacitance meter
45
45
(in mm)
Fig. 3
Continued on the following page.
159
Only for Applications
For General Purpose
GRM/DC3.15kV Series GRM/GRJ/GR3 Series
Test Method
AC250V Type
GA2 Series
Specifications
Safety Standard
Certified GA3 Series
Item
Product Information
No.
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM/DC3.15kV Series Specifications and Test Methods
Continued from the preceding page.
No.
For General Purpose
GRM/GRJ/GR3 Series
12
Solderability of
Termination
75% of the terminations are to be soldered evenly
and continuously.
Appearance
No marking defects
Capacitance
Change
Within ±2.5%
Only for Applications
GRM/DC3.15kV Series
,iÈÃÌ>˜ViÊ
13 to Soldering Q
Heat
I.R.
AC250V Type
GA2 Series
14
-«iVˆvˆV>̈œ˜Ã
Item
/iÃÌÊiÌ œ`
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in
solder solution for 2±0.5 sec.
Immersing speed: 25±2.5mm/s
Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235±5°C H60A or H63A Eutectic Solder
Preheat the capacitor as in table.
Immerse the capacitor in solder solution at 260±5°C for 10±1 sec.
Let sit at room condition* for 24±2 hrs., then measure.
U““iÀȘ}Êëii`: 25±2.5mm/s
1,000 min.
More than 10,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within ±2.5%
Q
1,000 min.
I.R.
More than 10,000MΩ
Dielectric
Strength
In accordance with item No.4
Temperature
Cycle
*Preheating
Step
1
2
Temperature
100 to 120°C
170 to 200°C
Time
1 min.
1 min.
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24±2 hrs. at room condition,* then measure.
Step
1
2
3
4
Temperature (°C)
Min. Operating Temp.±3
Room Temp.
Max. Operating Temp.±2
Room Temp.
Time (min.)
30±3
2 to 3
30±3
2 to 3
Safety Standard
Certified GA3 Series
Solder resist
Cu
Glass Epoxy Board
Fig. 4
Appearance
No marking defects
Capacitance
Change
Within ±5.0%
Product Information
Humidity
15 (Steady Q
State)
I.R.
16 Life
350 min.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within ±3.0%
Q
350 min.
I.R.
More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%
for 500W24
Y 0hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
Apply 120% of the rated voltage for 1,000W48
Y 0 hrs. at maximum
operating temperature ±3°C.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
The charge/discharge current is less than 50mA.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
160
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors (Medium Voltage)
g
e
c Features
T
1. These items are designed specifically for
telecommunications devices (IEEE802.3) in
Ethernet LAN and primary-secondary coupling for
DC-DC converters.
2. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels
3. Sn-plated external electrodes realize good
solderability.
4. Only for reflow soldering
L
Part Number
GR442Q
GR443D
GR443Q
GR455D
L
4.5 ±0.3
4.5 ±0.4
5.7 ±0.4
W
Dimensions (mm)
W
T
2.0 ±0.2
1.5 +0, -0.3
2.0 +0, -0.3
3.2 ±0.3
1.5 +0, -0.3
2.0 +0, -0.3
5.0 ±0.4
e min. g min.
0.3
2.5
3.2
AC250V Type
GA2 Series
c Applications
1. Ideal for use on telecommunications devices in
Ethernet LAN
2. Ideal for use as primary-secondary coupling for
DC-DC converters
Rated Voltage
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GR442QR73D101KW01L
2000Vdc
X7R (EIA)
100pF±10%
4.5
2
1.5
2.5mm
0.3mm min.
GR442QR73D121KW01L
2000Vdc
X7R (EIA)
120pF±10%
4.5
2
1.5
2.5mm
0.3mm min.
GR442QR73D151KW01L
2000Vdc
X7R (EIA)
150pF±10%
4.5
2
1.5
2.5mm
0.3mm min.
GR442QR73D181KW01L
2000Vdc
X7R (EIA)
180pF±10%
4.5
2
1.5
2.5mm
0.3mm min.
GR442QR73D221KW01L
2000Vdc
X7R (EIA)
220pF±10%
4.5
2
1.5
2.5mm
0.3mm min.
GR442QR73D271KW01L
2000Vdc
X7R (EIA)
270pF±10%
4.5
2
1.5
2.5mm
0.3mm min.
GR442QR73D331KW01L
2000Vdc
X7R (EIA)
330pF±10%
4.5
2
1.5
2.5mm
0.3mm min.
GR442QR73D391KW01L
2000Vdc
X7R (EIA)
390pF±10%
4.5
2
1.5
2.5mm
0.3mm min.
GR442QR73D471KW01L
2000Vdc
X7R (EIA)
470pF±10%
4.5
2
1.5
2.5mm
0.3mm min.
GR442QR73D561KW01L
2000Vdc
X7R (EIA)
560pF±10%
4.5
2
1.5
2.5mm
0.3mm min.
GR442QR73D681KW01L
2000Vdc
X7R (EIA)
680pF±10%
4.5
2
1.5
2.5mm
0.3mm min.
GR442QR73D821KW01L
2000Vdc
X7R (EIA)
820pF±10%
4.5
2
1.5
2.5mm
0.3mm min.
GR442QR73D102KW01L
2000Vdc
X7R (EIA)
1000pF±10%
4.5
2
1.5
2.5mm
0.3mm min.
GR442QR73D122KW01L
2000Vdc
X7R (EIA)
1200pF±10%
4.5
2
1.5
2.5mm
0.3mm min.
GR442QR73D152KW01L
2000Vdc
X7R (EIA)
1500pF±10%
4.5
2
1.5
2.5mm
0.3mm min.
GR443QR73D182KW01L
2000Vdc
X7R (EIA)
1800pF±10%
4.5
3.2
1.5
2.5mm
0.3mm min.
GR443QR73D222KW01L
2000Vdc
X7R (EIA)
2200pF±10%
4.5
3.2
1.5
2.5mm
0.3mm min.
GR443QR73D272KW01L
2000Vdc
X7R (EIA)
2700pF±10%
4.5
3.2
1.5
2.5mm
0.3mm min.
GR443QR73D332KW01L
2000Vdc
X7R (EIA)
3300pF±10%
4.5
3.2
1.5
2.5mm
0.3mm min.
GR443QR73D392KW01L
2000Vdc
X7R (EIA)
3900pF±10%
4.5
3.2
1.5
2.5mm
0.3mm min.
GR443DR73D472KW01L
2000Vdc
X7R (EIA)
4700pF±10%
4.5
3.2
2
2.5mm
0.3mm min.
GR455DR73D103KW01L
2000Vdc
X7R (EIA)
10000pF±10%
5.7
5
2
3.2mm
0.3mm min.
161
Product Information
Safety Standard
Certified GA3 Series
Do not use these products in any Automotive
Power train or Safety equipment including Battery
charger for Electric Vehicles and Plug-in Hybrid.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Part Number
Only for Applications
GR4 Series
e
For General Purpose
GRM/GRJ/GR3 Series
For Information Devices GR4 Series
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GR4 Series Specifications and Test Methods
For General Purpose
GRM/GRJ/GR3 Series
No.
Item
Specifications
Test Method
1
Operating
Temperature Range
–55 to +125°C
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimensions
Using calipers and micrometers
–
No failure should be observed when voltage in the table is
applied between the terminations, provided the charge/discharge
current is less than 50mA.
4
Dielectric Strength
No defects or abnormalities
Rated Voltage
Only for Applications
GR4 Series
DC2kV
AC250V Type
GA2 Series
5
*ՏÃiÊ6œÌ>}i
No self healing breakdowns or flash-overs have taken place in
the capacitor.
6
Insulation Resistance
(I.R.)
More than 6,000MΩ
7
Capacitance
Within the specified tolerance
8
Dissipation
Factor (D.F.)
0.025 max.
Test Voltage
120% of the rated voltage
AC1500V(r.m.s.)
Time
60±1 sec.
60±1 sec.
10 impulses of alternating polarity are subjected.
(5 impulses for each polarity)
The interval between impulses is 60 sec.
Applied Pulse: 1.2/50μs
Applied Voltage: 2.5kVo-p
The insulation resistance should be measured with DC500±50V
and within 60±5 sec. of charging.
The capacitance/D.F. should be measured at a frequency of
1±0.2kHz and a voltage of AC1±0.2V(r.m.s.).
The capacitance measurement should be made at each step
specified in the Table.
Safety Standard
Certified GA3 Series
9
Capacitance
Temperature
Characteristics
Cap. Change
within ±15%
(Temp. Range: –55 to +125°C)
Step
1
2
3
4
5
Temperature (°C)
25±2
Min. Operating Temp.±3
25±2
Max. Operating Temp.±2
25±2
U*ÀiÌÀi>̓i˜Ì
Perform a heat treatment at 150W0
Y10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
Product Information
10
Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
10N, 10±1s
Glass Epoxy Board
Fig. 1
11
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F.
0.025 max.
Vibration
Resistance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
162
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GR4 Series Specifications and Test Methods
Continued from the preceding page.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
b
ø4.5
40
d
c
20 50 Pressurizing
speed: 1.0mm/s
Pressurize
a
12
iviV̈œ˜
t : 1.6
100
R230
Fig. 2
LZW
­““®
4.5Z2.0
4.5Z3.2
5.7Z5.0
13
-œ`iÀ>LˆˆÌÞʜvÊ
/iÀ“ˆ˜>̈œ˜
««i>À>˜Vi
>«>VˆÌ>˜ViÊ
>˜}i
D.F.
,iÈÃÌ>˜ViÊ
14 ̜Ê-œ`iÀˆ˜}Ê I.R.
i>Ì
No marking defects
Within ±10%
0.025 max.
More than 1,000MΩ
Flexure=1
`
Capacitance meter
45
1.0
(in mm)
45
Fig. 3
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2±0.5 sec.
Immersing speed: 25±2.5mm/s
Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235±5°C H60A or H63A Eutectic Solder
Preheat the capacitor as in table.
Immerse the capacitor in solder solution at 260±5°C for 10±1
sec. Let sit at room condition* for 24±2 hrs., then measure.
U““iÀȘ}Êëii`: 25±2.5mm/s
U*ÀiÌÀi>̓i˜Ì
W 0
Perform a heat treatment at 150Y10
°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
**Ài i>̈˜}
In accordance with item No.4
««i>À>˜Vi
No marking defects
Within ±15%
D.F.
0.05 max.
I.R.
More than 3,000MΩ
/i“«iÀ>ÌÕÀiÊ
ÞVi
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
ˆ“i˜Ãˆœ˜Ê­““®
L
V
7.0
2.4
7.0
3.7
8.0
5.6
75% of the terminations are to be soldered evenly and continuously.
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
>«>VˆÌ>˜ViÊ
>˜}i
15
>
3.5
3.5
4.5
-Ìi«
1
2
/i“«iÀ>ÌÕÀi
100 to 120°C
170 to 200°C
/ˆ“i
1 min.
1 min.
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24±2 hrs. at room condition,* then measure.
-Ìi«
1
2
3
4
/i“«iÀ>ÌÕÀiÊ­c ®
Min. Operating Temp.±3
Room Temp.
Max. Operating Temp.±2
Room Temp.
/ˆ“iÊ­“ˆ˜°®
30±3
2 to 3
30±3
2 to 3
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150W
Y10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
In accordance with item No.4
Solder resist
Cu
Glass Epoxy Board
Fig. 4
««i>À>˜Vi
>«>VˆÌ>˜ViÊ
>˜}i
Փˆ`ˆÌÞÊ
16 ­-Ìi>`ÞÊ D.F.
-Ì>Ìi®
I.R.
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
No marking defects
Within ±15%
0.05 max.
More than 1,000MΩ
In accordance with item No.4
Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%
for 500W24
Y 0 hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150W
Y10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
163
Only for Applications
GR4 Series
No marking defects
For General Purpose
GRM/GRJ/GR3 Series
/iÃÌÊiÌ œ`
AC250V Type
GA2 Series
-«iVˆvˆV>̈œ˜Ã
Safety Standard
Certified GA3 Series
Ìi“
Product Information
ϡ
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
GR4 Series Specifications and Test Methods
Continued from the preceding page.
No.
Ìi“
For General Purpose
GRM/GRJ/GR3 Series
««i>À>˜Vi
>«>VˆÌ>˜ViÊ
>˜}i
17 ˆvi
-«iVˆvˆV>̈œ˜Ã
/iÃÌÊiÌ œ`
No marking defects
Within ±20%
D.F.
0.05 max.
I.R.
More than 2,000MΩ
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
Apply 110% of the rated voltage for 1,000W48
Y 0 hrs. at maximum
operating temperature ±3°C. Remove and let sit for 24±2 hrs. at
room condition,* then measure.
The charge/discharge current is less than 50mA.
U*ÀiÌÀi>̓i˜Ì
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Only for Applications
GR4 Series
AC250V Type
GA2 Series
Safety Standard
Certified GA3 Series
Product Information
164
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors (Medium Voltage)
g
e
c Features
T
1. Suitable for the trigger of the flash circuit,
because real capacitance is stable during
operating voltage.
2. The thin type fits thinner cameras.
3. Sn-plated external electrodes realize good
solderability.
4. For flow and reflow soldering
L
Part Number
GR721A
GR721B
GR731A
GR731B
GR731C
c Applications
For strobe circuit
L
2.0 ±0.2
3.2 ±0.2
W
Dimensions (mm)
W
T
e min. g min.
1.0 +0, -0.3
1.25 ±0.2
0.7
1.25 ±0.2
1.0 +0, -0.3
0.3
1.6 ±0.2 1.25 +0, -0.3
1.2
1.6 ±0.2
Electrode e
1
0.7mm
0.3mm min.
1
1.2mm
0.3mm min.
1
0.7mm
0.3mm min.
1.6
1
1.2mm
0.3mm min.
1.25
1.45
0.7mm
0.3mm min.
1.6
1
1.2mm
0.3mm min.
3.2
1.6
1.25
1.2mm
0.3mm min.
27000pF±10%
2
1.25
1.45
0.7mm
0.3mm min.
-
27000pF±10%
3.2
1.6
1
1.2mm
0.3mm min.
-
33000pF±10%
3.2
1.6
1
1.2mm
0.3mm min.
350Vdc
-
33000pF±10%
3.2
1.6
1.25
1.2mm
0.3mm min.
350Vdc
-
47000pF±10%
3.2
1.6
1.8
1.2mm
0.3mm min.
Width W
(mm)
10000pF±10%
2
1.25
10000pF±10%
3.2
1.6
-
15000pF±10%
2
1.25
350Vdc
-
15000pF±10%
3.2
350Vdc
-
22000pF±10%
2
GR731AW0BB223KW01D
350Vdc
-
22000pF±10%
3.2
GR731BW0BB223KW01L
350Vdc
-
22000pF±10%
GR721BW0BB273KW03L
350Vdc
-
GR731AW0BB273KW01D
350Vdc
GR731AW0BB333KW01D
350Vdc
GR731BW0BB333KW01L
GR731CW0BB473KW03L
TC Code
(Standard)
Capacitance
GR721AW0BB103KW01D
350Vdc
-
GR731AW0BB103KW01D
350Vdc
-
GR721AW0BB153KW01D
350Vdc
GR731AW0BB153KW01D
GR721BW0BB223KW03L
165
Product Information
Thickness T
max.
(mm)
Electrode g
min.
Length L
(mm)
Rated Voltage
Part Number
Safety Standard
Certified GA3 Series
AC250V Type
GA2 Series
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Only for Applications
GR7 Series
e
For General Purpose
GRM/GRJ/GR3 Series
For Camera Flash Circuit GR7 Series
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GR7 Series Specifications and Test Methods
For General Purpose
GRM/GRJ/GR3 Series
Only for Applications
GR7 Series
No.
Item
Specifications
Test Method
1
Operating
Temperature Range
–55 to +125°C
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimensions
Using calipers and micrometers
4
Dielectric Strength
No defects or abnormalities
No failure should be observed when DC500V is applied between
the terminations for 1 to 5 sec., provided the charge/discharge
current is less than 50mA.
5
Insulation Resistance
(I.R.)
CU0.01μF: More than 100MΩ s —&
CF0.01μF: More than 10,000MΩ
The insulation resistance should be measured with DC250±50V
and within 60±5 sec. of charging.
6
Capacitance
Within the specified tolerance
7
Dissipation
Factor (D.F.)
0.025 max.
–
The capacitance/D.F. should be measured at a frequency of
1±0.2kHz and a voltage of AC1±0.2V(r.m.s.).
The capacitance measurement should be made at each step
specified in the Table.
AC250V Type
GA2 Series
8
Capacitance
Temperature
Characteristics
Cap. Change
Within ±10% (Apply DC350V bias)
Within W22
Y33 % (No DC bias)
(Temp. Range : –55 to +125°C)
Step
1
2
3
4
5
Temperature (°C)
25±2
Min. Operating Temp.±3
25±2
Max. Operating Temp.±2
25±2
U*ÀiÌÀi>̓i˜Ì
W0
Perform a heat treatment at 150Y10
°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
Safety Standard
Certified GA3 Series
9
Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
10N, 10±1s
Glass Epoxy Board
Product Information
Fig. 1
10
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F.
0.025 max.
Vibration
Resistance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
166
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GR7 Series Specifications and Test Methods
Continued from the preceding page.
ø4.5
40
d
c
20 50 Pressurizing
speed: 1.0mm/s
Pressurize
a
11 Deflection
t : 1.6
100
R230
Fig. 2
LZW
(mm)
2.0Z1.25
3.2Z1.6
12
Solderability of
Termination
14
Flexure=1
No marking defects
Capacitance
Change
Within ±10%
0.025 max.
CU0.01μF: More than 100MΩ s —&
CF0.01μF: More than 10,000MΩ
Dielectric
Strength
In accordance with item No.4
Appearance
No marking defects
Capacitance
Change
Within ±7.5%
D.F.
0.025 max.
I.R.
CU0.01μF: More than 100MΩ s —&
CF0.01μF: More than 10,000MΩ
Temperature
Cycle
Capacitance meter
d
45
1.0
75% of the terminations are to be soldered evenly and continuously.
Appearance
,iÈÃÌ>˜ViÊ
D.F.
13 to Soldering
Heat
I.R.
a
1.2
2.2
ˆ“i˜Ãˆœ˜Ê­““®
b
c
4.0
1.65
5.0
2.0
(in mm)
45
Fig. 3
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2±0.5 sec.
Immersing speed: 25±2.5mm/s
Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235±5°C H60A or H63A Eutectic Solder
Preheat the capacitor at 120 to 150°C for 1 min.
Immerse the capacitor in solder solution at 260±5°C for 10±1
sec. Let sit at room condition* for 24±2 hrs., then measure.
U““iÀȘ}Êëii`: 25±2.5mm/s
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150W
Y10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24±2 hrs. at room condition,* then measure.
Step
1
2
3
4
Temperature (°C)
Min. Operating Temp.±3
Room Temp.
Max. Operating Temp.±2
Room Temp.
Time (min.)
30±3
2 to 3
30±3
2 to 3
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150W
Y10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
Dielectric
Strength
In accordance with item No.4
Solder resist
Cu
Glass Epoxy Board
Fig. 4
Humidity
15 (Steady
State)
Appearance
No marking defects
Capacitance
Change
Within ±15%
D.F.
0.05 max.
I.R.
CU0.01μF: More than 10MΩ s —&
CF0.01μF: More than 1,000MΩ
Dielectric
Strength
In accordance with item No.4
Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%
W24
for 500Y
0 hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
s0RETREATMENT
0
Perform a heat treatment at 150W
Y10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
167
Only for Applications
GR7 Series
b
AC250V Type
GA2 Series
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
No marking defects
For General Purpose
GRM/GRJ/GR3 Series
/iÃÌÊiÌ œ`
Safety Standard
Certified GA3 Series
-«iVˆvˆV>̈œ˜Ã
Item
Product Information
No.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
GR7 Series Specifications and Test Methods
Continued from the preceding page.
Ìi“
No.
For General Purpose
GRM/GRJ/GR3 Series
««i>À>˜Vi
>«>VˆÌ>˜ViÊ
>˜}i
16 ˆvi
Within ±15%
Only for Applications
GR7 Series
0.05 max.
I.R.
CU0.01μF: More than 10MΩ s —&
CF0.01μF: More than 1,000MΩ
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
««i>À>˜Vi
No marking defects
Փˆ`ˆÌÞÊ D.F.
œ>`ˆ˜}Ê
I.R.
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
/iÃÌÊiÌ œ`
No marking defects
D.F.
>«>VˆÌ>˜ViÊ
>˜}i
17
-«iVˆvˆV>̈œ˜Ã
Within ±15%
0.05 max.
CU0.01μF: More than 10MΩ s —&
CF0.01μF: More than 1,000MΩ
Apply DC350V for 1,000W48
Y 0 hrs. at maximum operating
temperature ±3°C. Remove and let sit for 24±2 hrs. at room
condition,* then measure.
The charge/discharge current is less than 50mA.
U*ÀiÌÀi>̓i˜Ì
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
Apply the rated voltage at 40±2°C and relative humidity of 90 to
W24
95% for 500Y
0 hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>̓i˜Ì
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
In accordance with item No.4
AC250V Type
GA2 Series
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Safety Standard
Certified GA3 Series
Product Information
168
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors
g
e
c Features
T
1. Chip monolithic ceramic capacitor for AC lines.
2. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
3. Sn-plated external electrodes realize good
solderability.
4. Only for reflow soldering
5. Capacitance 0.01 to 0.1uF for connecting lines and
470 to 4700pF for connecting lines to earth.
L
Part Number
GA242Q
GA243D
GA243Q
GA255D
L
4.5 ±0.3
4.5 ±0.4
5.7 ±0.4
W
Dimensions (mm)
W
T
e min.
2.0 ±0.2 1.5 +0, -0.3
2.0 +0, -0.3
3.2 ±0.3
0.3
1.5 +0, -0.3
5.0 ±0.4 2.0 +0, -0.3
g min.
2.5
3.2
Only for Applications
e
For General Purpose
GRM/GRJ/GR3 Series
AC250V Type (Which Meet Japanese Law) GA2 Series
c Applications
AC250V Type
GA2 Series
Noise suppression filters for switching power supplies,
telephones, facsimiles, modems.
c Reference Standard
GA2 series obtains no safety approval.
This series is based on the standards of the
electrical appliance and material safety law of Japan
(separated table 4).
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
X7R (EIA)
470pF±20%
4.5
2.0
1.5
2.5mm
0.3mm min.
X7R (EIA)
1000pF±20%
4.5
2.0
1.5
2.5mm
0.3mm min.
250Vac(r.m.s.)
X7R (EIA)
2200pF±20%
4.5
3.2
1.5
2.5mm
0.3mm min.
GA243QR7E2332MW01L
250Vac(r.m.s.)
X7R (EIA)
3300pF±20%
4.5
3.2
1.5
2.5mm
0.3mm min.
GA243DR7E2472MW01L
250Vac(r.m.s.)
X7R (EIA)
4700pF±20%
4.5
3.2
2
2.5mm
0.3mm min.
GA243QR7E2103MW01L
250Vac(r.m.s.)
X7R (EIA)
10000pF±20%
4.5
3.2
1.5
2.5mm
0.3mm min.
GA243QR7E2223MW01L
250Vac(r.m.s.)
X7R (EIA)
22000pF±20%
4.5
3.2
1.5
2.5mm
0.3mm min.
GA243DR7E2473MW01L
250Vac(r.m.s.)
X7R (EIA)
47000pF±20%
4.5
3.2
2
2.5mm
0.3mm min.
GA255DR7E2104MW01L
250Vac(r.m.s.)
X7R (EIA)
0.10µF±20%
5.7
5.0
2
3.2mm
0.3mm min.
Rated Voltage
TC Code
(Standard)
GA242QR7E2471MW01L
250Vac(r.m.s.)
GA242QR7E2102MW01L
250Vac(r.m.s.)
GA243QR7E2222MW01L
Part Number
169
Product Information
Safety Standard
Certified GA3 Series
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GA2 Series Specifications and Test Methods
For General Purpose
GRM/GRJ/GR3 Series
No.
Item
Specifications
Test Method
1
Operating
Temperature Range
–55 to +125°C
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimensions
Using calipers and micrometers
–
No failure should be observed when voltage in the table is
applied between the terminations for 60±1 sec., provided the
charge/discharge current is less than 50mA.
Only for Applications
4
Dielectric Strength
No defects or abnormalities
5
Insulation Resistance
(I.R.)
More than 2,000MΩ
6
Capacitance
Within the specified tolerance
7
Dissipation
Factor (D.F.)
0.025 max.
Nominal Capacitance
CU10,000pF
CF10,000pF
Test Voltage
AC575V (r.m.s.)
AC1500V (r.m.s.)
The insulation resistance should be measured with DC500±50V
and within 60±5 sec. of charging.
The capacitance/D.F. should be measured at a frequency of
1±0.2kHz and a voltage of AC1±0.2V (r.m.s.).
The capacitance measurement should be made at each step
specified in the Table.
AC250V Type
GA2 Series
8
Capacitance
Temperature
Characteristics
Cap. Change
Within ±15%
(Temp. Range: –55 to +125°C)
Step
1
2
3
4
5
Temperature (°C)
25±2
Min. Operating Temp.±3
25±2
Max. Operating Temp.±2
25±2
Safety Standard
Certified GA3 Series
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150W
Y10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
As in Fig., discharge is made 50 times at 5 sec. intervals from
the capacitor (Cd) charged at DC voltage of specified.
9
Product Information
Discharge
Test
(Application:
Nominal
Capacitance
CF10,000pF)
R3
Appearance
R1
No defects or abnormalities
10kV
V
Ct
R2
Cd
Ct: Capacitor under test Cd: 0.001μF
R1: 1,000Ω R2: 100MΩ R3: Surge resistance
10
Adhesive Strength
of Termination
No removal of the terminations or other defects should occur.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
10N, 10±1s
Glass Epoxy Board
Fig. 1
11
Appearance
No defects or abnormalities
Capacitance
Within the specified tolerance
D.F.
0.025 max.
Vibration
Resistance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Solder resist
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
170
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GA2 Series Specifications and Test Methods
Continued from the preceding page.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
b
ø4.5
40
d
c
a
12
iviV̈œ˜
20 50 Pressurizing
speed: 1.0mm/s
Pressurize
t : 1.6
100
Fig. 2
LZW
­““®
4.5Z2.0
4.5Z3.2
5.7Z5.0
13
-œ`iÀ>LˆˆÌÞʜvÊ
/iÀ“ˆ˜>̈œ˜
««i>À>˜Vi
>«>VˆÌ>˜ViÊ
>˜}i
14
Փˆ`ˆÌÞ
˜ÃՏ>̈œ˜
More than 1,000MΩ
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
««i>À>˜Vi
No marking defects
Within ±10%
0.025 max.
More than 2,000MΩ
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
««i>À>˜Vi
No marking defects
Within ±15%
D.F.
0.05 max.
I.R.
More than 2,000MΩ
/i“«iÀ>ÌÕÀiÊ
ÞVi
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
Capacitance meter
45
1.0
45
(in mm)
Fig. 3
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2±0.5 sec.
Immersing speed: 25±2.5mm/s
Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235±5°C H60A or H63A Eutectic Solder
Within ±15%
I.R.
>«>VˆÌ>˜ViÊ
>˜}i
Flexure=1
`
No marking defects
0.05 max.
D.F.
,iÈÃÌ>˜ViÊ
15 ̜Ê-œ`iÀˆ˜}Ê I.R.
i>Ì
ˆ“i˜Ãˆœ˜Ê­““®
L
c
7.0
2.4
7.0
3.7
8.0
5.6
75% of the terminations are to be soldered evenly and continuously.
D.F.
>«>VˆÌ>˜ViÊ
>˜}i
16
>
3.5
3.5
4.5
R230
In accordance with item No.4
The capacitor should be subjected to 40±2°C, relative humidity of
90 to 98% for 8 hrs., and then removed in room condition* for 16
hrs. until 5 cycles.
Preheat the capacitor as in table.
Immerse the capacitor in solder solution at 260±5°C for 10±1
sec. Let sit at room condition* for 24±2 hrs., then measure.
U““iÀȘ}Êëii`: 25±2.5mm/s
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150W
Y10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
**Ài i>̈˜}
-Ìi«
1
2
/i“«iÀ>ÌÕÀi
100 to 120°C
170 to 200°C
/ˆ“i
1 min.
1 min.
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24±2 hrs. at room condition,* then measure.
-Ìi«
1
2
3
4
/i“«iÀ>ÌÕÀiÊ­c ®
Min. Operating Temp.±3
Room Temp.
Max. Operating Temp.±2
Room Temp.
/ˆ“iÊ­“ˆ˜°®
30±3
2 to 3
30±3
2 to 3
U*ÀiÌÀi>̓i˜Ì
0
Perform a heat treatment at 150W
Y10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
Solder resist
Cu
Glass Epoxy Board
Fig. 4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
171
Only for Applications
No marking defects
For General Purpose
GRM/GRJ/GR3 Series
/iÃÌÊiÌ œ`
AC250V Type
GA2 Series
-«iVˆvˆV>̈œ˜Ã
Safety Standard
Certified GA3 Series
Ìi“
Product Information
ϡ
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
GA2 Series Specifications and Test Methods
Continued from the preceding page.
Ìi“
No.
For General Purpose
GRM/GRJ/GR3 Series
««i>À>˜Vi
>«>VˆÌ>˜ViÊ
>˜}i
Փˆ`ˆÌÞÊ
17 ­-Ìi>`ÞÊ D.F.
Ê-Ì>Ìi®
I.R.
-«iVˆvˆV>̈œ˜Ã
No marking defects
Within ±15%
0.05 max.
More than 1,000MΩ
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
««i>À>˜Vi
No marking defects
Only for Applications
>«>VˆÌ>˜ViÊ
>˜}i
Within ±20%
D.F.
0.05 max.
I.R.
More than 1,000MΩ
18 ˆvi
AC250V Type
GA2 Series
19
Safety Standard
Certified GA3 Series
Փˆ`ˆÌÞ
œ>`ˆ˜}
Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%
W24
for 500Y
0hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>̓i˜Ì
W 0
Perform a heat treatment at 150Y10
°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*
Apply voltage and time as in Table at maximum operating
temperature ±3°C. Remove and let sit for 24±2 hrs. at room
condition,* then measure. The charge / discharge current is
less than 50mA.
œ“ˆ˜>Ê >«>VˆÌ>˜Vi
/iÃÌÊ/ˆ“i
/iÃÌÊ6œÌ>}i
W48
CU10,000pF
1,000Y
0 hrs. AC300V (r.m.s.)
W48
CF10,000pF
1,500Y
0 hrs. AC500V (r.m.s.) *
* Except that once each hour the voltage is increased to
AC1,000V (r.m.s.) for 0.1 sec.
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
««i>À>˜Vi
No marking defects
>«>VˆÌ>˜ViÊ
>˜}i
/iÃÌÊiÌ œ`
U*ÀiÌÀi>̓i˜Ì
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
Within ±15%
D.F.
0.05 max.
I.R.
More than 1,000MΩ
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
Apply the rated voltage at 40±2°C and relative humidity of 90 to
W24
95% for 500Y
0hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>̓i˜Ì
Apply test voltage for 60±5 min. at test temperature.
Remove and let sit for 24±2 hrs. at room condition.*
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Product Information
172
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors
Part Number
GA355D
W
Dimensions (mm)
W
T
e min.
5.0 ±0.4 2.0 ±0.3
0.3
L
5.7 ±0.4
g min.
4.0
c Standard Certification
UL
1. Ideal for use as Y capacitor or X capacitor for
various switching power supplies
2. Ideal for modem applications
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Standard No.
Class
UL1414
Line By-pass
VDE
IEC 60384-14
EN 60384-14
BSI
EN 60065 (14.2)
IEC 60384-14
EN 60384-14
SEMKO
IEC 60384-14
EN 60384-14
ESTI
IEC 60384-14
Rated Voltage
AC250V
(r.m.s.)
X1, Y2
Safety Standard
Certified GA3 Series
c Applications
Rated Voltage
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GA355DR7GC101KY02L
250Vac(r.m.s.)
X7R (EIA)
100pF±10%
5.7
5.0
2.3
4.0mm
0.3mm min.
GA355DR7GC151KY02L
250Vac(r.m.s.)
X7R (EIA)
150pF±10%
5.7
5.0
2.3
4.0mm
0.3mm min.
GA355DR7GC221KY02L
250Vac(r.m.s.)
X7R (EIA)
220pF±10%
5.7
5.0
2.3
4.0mm
0.3mm min.
GA355DR7GC331KY02L
250Vac(r.m.s.)
X7R (EIA)
330pF±10%
5.7
5.0
2.3
4.0mm
0.3mm min.
Part Number
Only for Applications
L
AC250V Type
GA2 Series
e
T
1. Chip monolithic ceramic capacitor (certified as
conforming to safety standards) for AC lines.
2. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
3. Compared to lead type capacitors, this new
capacitor is greatly downsized and low-profiled to
1/10 or less in volume, and 1/4 or less in height.
4. Type GC can be used as an X1-class and Y2-class
capacitor, line-by-pass capacitor of UL1414.
5. +125 degree C guaranteed
6. Only for reflow soldering
g
173
Product Information
e
c Features
For General Purpose
GRM/GRJ/GR3 Series
Safety Standard Certified GA3 Series UL, IEC60384-14 Class X1/Y2 Type GC
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors
Safety Standard Certified GA3 Series IEC60384-14 Class Y2, X1/Y2 Type GF
g
e
c Features
Only for Applications
1. Available for equipment based on IEC/EN60950
and UL1950. Besides, the GA352/355 types are
available for equipment based on IEC/EN60065,
UL1492, and UL6500.
2. Type GF can be used as a Y2-class capacitor.
3. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
4. +125 degree C guaranteed
5. Only for reflow soldering
T
For General Purpose
GRM/GRJ/GR3 Series
e
L
Part Number
GA342A
GA342D
GA342Q
GA352Q
GA355D
GA355Q
L
W
Dimensions (mm)
T
1.0 +0, -0.3
2.0 ±0.2
2.0 ±0.2
1.5 +0, -0.3
2.8 ±0.3
1.5 +0, -0.3
2.0 +0, -0.3
5.0 ±0.4
1.5 +0, -0.3
W
4.5 ±0.3
5.7 ±0.4
e min. g min.
2.5
0.3
4.0
AC250V Type
GA2 Series
c Standard Certification
c Applications
Safety Standard
Certified GA3 Series
1. Ideal for use on line filters and couplings for
DAA modems without transformers
2. Ideal for use on line filters for information
equipment
3. Ideal for use as Y capacitor or X capacitor for
various switching power supplies (GA352/355 types
only)
UL
Status of Certification
Standard
No.
Class
UL1414
X1, Y2
UL 60950-1
–
Size : 4.5x2.0mm
Rated
Size : 5.7x2.8mm Voltage
and over
–
–
VDE
–
IEC 60384-14 X1, Y2
SEMKO EN 60384-14
Y2
AC250V
(r.m.s.)
Applications
Product Information
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Size
Switching power
supplies
4.5x2.0mm
–
Communication
network devices
such as a modem
5.7x2.8mm and over
Rated Voltage
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GA342D1XGF100JY02L
250Vac(r.m.s.)
SL (JIS)
10pF±5%
4.5
2.0
2.2
2.5mm
0.3mm min.
GA342D1XGF120JY02L
250Vac(r.m.s.)
SL (JIS)
12pF±5%
4.5
2.0
2.2
2.5mm
0.3mm min.
GA342D1XGF150JY02L
250Vac(r.m.s.)
SL (JIS)
15pF±5%
4.5
2.0
2.2
2.5mm
0.3mm min.
GA342D1XGF180JY02L
250Vac(r.m.s.)
SL (JIS)
18pF±5%
4.5
2.0
2.2
2.5mm
0.3mm min.
GA342D1XGF220JY02L
250Vac(r.m.s.)
SL (JIS)
22pF±5%
4.5
2.0
2.2
2.5mm
0.3mm min.
GA342A1XGF270JW31L
250Vac(r.m.s.)
SL (JIS)
27pF±5%
4.5
2.0
1
2.5mm
0.3mm min.
GA342A1XGF330JW31L
250Vac(r.m.s.)
SL (JIS)
33pF±5%
4.5
2.0
1
2.5mm
0.3mm min.
GA342A1XGF390JW31L
250Vac(r.m.s.)
SL (JIS)
39pF±5%
4.5
2.0
1
2.5mm
0.3mm min.
GA342A1XGF470JW31L
250Vac(r.m.s.)
SL (JIS)
47pF±5%
4.5
2.0
1
2.5mm
0.3mm min.
GA342A1XGF560JW31L
250Vac(r.m.s.)
SL (JIS)
56pF±5%
4.5
2.0
1
2.5mm
0.3mm min.
GA342A1XGF680JW31L
250Vac(r.m.s.)
SL (JIS)
68pF±5%
4.5
2.0
1
2.5mm
0.3mm min.
GA342A1XGF820JW31L
250Vac(r.m.s.)
SL (JIS)
82pF±5%
4.5
2.0
1
2.5mm
0.3mm min.
GA342QR7GF101KW01L
250Vac(r.m.s.)
X7R (EIA)
100pF±10%
4.5
2.0
1.5
2.5mm
0.3mm min.
GA342QR7GF151KW01L
250Vac(r.m.s.)
X7R (EIA)
150pF±10%
4.5
2.0
1.5
2.5mm
0.3mm min.
GA342DR7GF221KW02L
250Vac(r.m.s.)
X7R (EIA)
220pF±10%
4.5
2.0
2.2
2.5mm
0.3mm min.
GA342DR7GF331KW02L
250Vac(r.m.s.)
X7R (EIA)
330pF±10%
4.5
2.0
2.2
2.5mm
0.3mm min.
GA342QR7GF471KW01L
250Vac(r.m.s.)
X7R (EIA)
470pF±10%
4.5
2.0
1.5
2.5mm
0.3mm min.
GA352QR7GF471KW01L
250Vac(r.m.s.)
X7R (EIA)
470pF±10%
5.7
2.8
1.5
4.0mm
0.3mm min.
GA342QR7GF681KW01L
250Vac(r.m.s.)
X7R (EIA)
680pF±10%
4.5
2.0
1.5
2.5mm
0.3mm min.
GA352QR7GF681KW01L
250Vac(r.m.s.)
X7R (EIA)
680pF±10%
5.7
2.8
1.5
4.0mm
0.3mm min.
GA342DR7GF102KW02L
250Vac(r.m.s.)
X7R (EIA)
1000pF±10%
4.5
2.0
2.2
2.5mm
0.3mm min.
GA352QR7GF102KW01L
250Vac(r.m.s.)
X7R (EIA)
1000pF±10%
5.7
2.8
1.5
4.0mm
0.3mm min.
Part Number
Continued on the following page.
174
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GA352QR7GF152KW01L
250Vac(r.m.s.)
X7R (EIA)
1500pF±10%
5.7
2.8
1.5
4.0mm
0.3mm min.
GA355QR7GF182KW01L
250Vac(r.m.s.)
X7R (EIA)
1800pF±10%
5.7
5.0
1.5
4.0mm
0.3mm min.
GA355QR7GF222KW01L
250Vac(r.m.s.)
X7R (EIA)
2200pF±10%
5.7
5.0
1.5
4.0mm
0.3mm min.
GA355QR7GF332KW01L
250Vac(r.m.s.)
X7R (EIA)
3300pF±10%
5.7
5.0
1.5
4.0mm
0.3mm min.
GA355DR7GF472KW01L
250Vac(r.m.s.)
X7R (EIA)
4700pF±10%
5.7
5.0
2
4.0mm
0.3mm min.
Product Information
Safety Standard
Certified GA3 Series
AC250V Type
GA2 Series
Only for Applications
Rated Voltage
Part Number
For General Purpose
GRM/GRJ/GR3 Series
Continued from the preceding page.
175
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors
Safety Standard Certified GA3 Series IEC60384-14 Class Y3 Type GD
g
e
Only for Applications
1. Available for equipment based on IEC/EN60950
and UL1950.
2. Type GD can be used as a Y3-class capacitor.
3. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
4. +125 degree C guaranteed
5. Only for reflow soldering
T
For General Purpose
GRM/GRJ/GR3 Series
e
c Features
L
Part Number
GA342A
GA342D
GA342Q
GA343D
GA343Q
c Applications
AC250V Type
GA2 Series
1. Ideal for use on line filters and couplings for
DAA modems without transformers
2. Ideal for use on line filters for information
equipment
W
Dimensions (mm)
T
1.0 +0, -0.3
2.0 ±0.2
2.0 ±0.2
1.5 +0, -0.3
2.0 +0, -0.3
3.2 ±0.3
1.5 +0, -0.3
L
W
4.5 ±0.3
4.5 ±0.4
e min. g min.
0.3
2.5
c Standard Certification
Standard No.
Class
UL 60950-1
–
IEC 60384-14
EN 60384-14
Y3
UL
SEMKO
Safety Standard
Certified GA3 Series
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Rated Voltage
AC250V(r.m.s.)
Applications
Size
Switching power
supplies
4.5x3.2mm and under
–
Communication
network devices
such as a modem
Product Information
Rated Voltage
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GA342D1XGD100JY02L
250Vac(r.m.s.)
SL (JIS)
10pF±5%
4.5
2.0
2.2
2.5mm
0.3mm min.
GA342D1XGD120JY02L
250Vac(r.m.s.)
SL (JIS)
12pF±5%
4.5
2.0
2.2
2.5mm
0.3mm min.
GA342D1XGD150JY02L
250Vac(r.m.s.)
SL (JIS)
15pF±5%
4.5
2.0
2.2
2.5mm
0.3mm min.
GA342D1XGD180JY02L
250Vac(r.m.s.)
SL (JIS)
18pF±5%
4.5
2.0
2.2
2.5mm
0.3mm min.
GA342D1XGD220JY02L
250Vac(r.m.s.)
SL (JIS)
22pF±5%
4.5
2.0
2.2
2.5mm
0.3mm min.
GA342A1XGD270JW31L
250Vac(r.m.s.)
SL (JIS)
27pF±5%
4.5
2.0
1
2.5mm
0.3mm min.
GA342A1XGD330JW31L
250Vac(r.m.s.)
SL (JIS)
33pF±5%
4.5
2.0
1
2.5mm
0.3mm min.
GA342A1XGD390JW31L
250Vac(r.m.s.)
SL (JIS)
39pF±5%
4.5
2.0
1
2.5mm
0.3mm min.
GA342A1XGD470JW31L
250Vac(r.m.s.)
SL (JIS)
47pF±5%
4.5
2.0
1
2.5mm
0.3mm min.
GA342A1XGD560JW31L
250Vac(r.m.s.)
SL (JIS)
56pF±5%
4.5
2.0
1
2.5mm
0.3mm min.
GA342A1XGD680JW31L
250Vac(r.m.s.)
SL (JIS)
68pF±5%
4.5
2.0
1
2.5mm
0.3mm min.
GA342A1XGD820JW31L
250Vac(r.m.s.)
SL (JIS)
82pF±5%
4.5
2.0
1
2.5mm
0.3mm min.
GA342QR7GD101KW01L
250Vac(r.m.s.)
X7R (EIA)
100pF±10%
4.5
2.0
1.5
2.5mm
0.3mm min.
GA342QR7GD151KW01L
250Vac(r.m.s.)
X7R (EIA)
150pF±10%
4.5
2.0
1.5
2.5mm
0.3mm min.
GA342QR7GD221KW01L
250Vac(r.m.s.)
X7R (EIA)
220pF±10%
4.5
2.0
1.5
2.5mm
0.3mm min.
GA342QR7GD331KW01L
250Vac(r.m.s.)
X7R (EIA)
330pF±10%
4.5
2.0
1.5
2.5mm
0.3mm min.
GA342QR7GD471KW01L
250Vac(r.m.s.)
X7R (EIA)
470pF±10%
4.5
2.0
1.5
2.5mm
0.3mm min.
GA342QR7GD681KW01L
250Vac(r.m.s.)
X7R (EIA)
680pF±10%
4.5
2.0
1.5
2.5mm
0.3mm min.
GA342QR7GD102KW01L
250Vac(r.m.s.)
X7R (EIA)
1000pF±10%
4.5
2.0
1.5
2.5mm
0.3mm min.
GA342QR7GD152KW01L
250Vac(r.m.s.)
X7R (EIA)
1500pF±10%
4.5
2.0
1.5
2.5mm
0.3mm min.
GA343QR7GD182KW01L
250Vac(r.m.s.)
X7R (EIA)
1800pF±10%
4.5
3.2
1.5
2.5mm
0.3mm min.
GA343QR7GD222KW01L
250Vac(r.m.s.)
X7R (EIA)
2200pF±10%
4.5
3.2
1.5
2.5mm
0.3mm min.
GA343DR7GD472KW01L
250Vac(r.m.s.)
X7R (EIA)
4700pF±10%
4.5
3.2
2
2.5mm
0.3mm min.
Part Number
176
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Chip Monolithic Ceramic Capacitors
e
T
L
Part Number
GA355Q
GA355D
GA355E
GA355X
W
Dimensions (mm)
W
T
e min.
1.5 +0,-0.3
2.0 +0,-0.3
5.0 ±0.4
0.3
2.5 +0,-0.3
2.9 +0,-0.4
L
5.7 ±0.4
g min.
3.0
c Standard Certification
c Applications
Standard No.
Class
Rated Voltage
SEMKO
IEC 60384-14
EN 60384-14
X2
AC250V
(r.m.s.)
ESTI
IEC 60384-14
VDE
Do not use these products in any Automotive
Power train or Safety equipment including Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
applications such as Power train and Safety equipment.
Safety Standard
Certified GA3 Series
Ideal for use as X capacitor for various switching
power supplies
Only for Applications
1. Type GB can be used as an X2-class capacitor.
2. Chip monolithic ceramic capacitor (certified as
conforming to safety standards) for AC lines.
3. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
4. Compared to lead type capacitors, this new
capacitor is greatly downsized and low-profiled to
1/10 or less in volume, and 1/4 or less in height.
5. +125 degree C guaranteed
6. Only for reflow soldering
AC250V Type
GA2 Series
g
c Features
Part Number
Rated Voltage
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Electrode g
min.
Electrode e
GA355QR7GB103KW01L
250Vac(r.m.s.)
X7R (EIA)
10000pF±10%
5.7
5.0
1.5
3.0mm
0.3mm min.
GA355QR7GB153KW01L
250Vac(r.m.s.)
X7R (EIA)
15000pF±10%
5.7
5.0
1.5
3.0mm
0.3mm min.
GA355DR7GB223KW01L
250Vac(r.m.s.)
X7R (EIA)
22000pF±10%
5.7
5.0
2
3.0mm
0.3mm min.
GA355ER7GB333KW01L
250Vac(r.m.s.)
X7R (EIA)
33000pF±10%
5.7
5.0
2.5
3.0mm
0.3mm min.
GA355ER7GB473KW01L
250Vac(r.m.s.)
X7R (EIA)
47000pF±10%
5.7
5.0
2.5
3.0mm
0.3mm min.
GA355XR7GB563KW06L
250Vac(r.m.s.)
X7R (EIA)
56000pF±10%
5.7
5.0
2.9
3.0mm
0.3mm min.
177
Product Information
e
For General Purpose
GRM/GRJ/GR3 Series
Safety Standard Certified GA3 Series IEC60384-14 Class X2 Type GB
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GA3 Series Specifications and Test Methods
For General Purpose
GRM/GRJ/GR3 Series
No.
Item
Specifications
Test Method
1
Operating
Temperature Range
–55 to +125°C
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimensions
Using calipers and micrometers
–
No failure should be observed when voltage in the table is
applied between the terminations for 60±1 sec., provided the
charge/discharge current is less than 50mA.
4
Dielectric Strength
No defects or abnormalities
Only for Applications
/iÃÌÊ6œÌ>}i
DC1075V
AC1500V (r.m.s.)
AC2000V (r.m.s.)
Type GB
Type GC/GD
Type GF
AC250V Type
GA2 Series
5
*ՏÃiÊ6œÌ>}i
(Application: Type
GD/GF)
No self healing breakdowns or flash-overs have taken place in
the capacitor.
10 impulses of alternating polarity are subjected.
(5 impulses for each polarity)
The interval between impulses is 60 sec.
Applied Pulse: 1.2/50μs
Applied Voltage: 2.5kVo-p
6
Insulation Resistance
(I.R.)
More than 6,000MΩ
The insulation resistance should be measured with DC500±50V
and within 60±5 sec. of charging.
Ç
Capacitance
Within the specified tolerance
8
Dissipation
Factor (D.F.)
Q
Char.
X7R
SL
Specification
D.F.V0.025
QU400+20C*2 (CF30pF)
QU1000
(CU30pF)
The capacitance/Q/D.F. should be measured at a frequency of
1±0.2kHz (SL char.: 1±0.2MHz) and a voltage of
AC1±0.2V (r.m.s.).
Safety Standard
Certified GA3 Series
The capacitance measurement should be made at each step
specified in the Table.
9
Capacitance
Temperature
Characteristics
Char.
Capacitance Change
X7R
Within ±15%
Temperature characteristic guarantee is –55 to +125°C
Char.
Temperature Coefficient
SL
+350 to –1000ppm/°C
Temperature characteristic guarantee is +20 to +85°C
Product Information
Appearance
No defects or abnormalities
I.R.
More than 1,000MΩ
Step
1
2
3
4
5
Temperature (°C)
25±2 (20±2 for SL char.)
Min. Operating Temp.±3
25±2 (20±2 for SL char.)
Max. Operating Temp.±2
25±2 (20±2 for SL char.)
SL char. :
The capacitance should be measured at even 85°C between
step 3 and step 4.
U*ÀiÌÀi>̓i˜ÌÊvœÀÊ8Ç,ÊV >À°
W 0
Perform a heat treatment at 150Y10
°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*1
As in Fig., discharge is made 50 times at 5 sec. intervals from
the capacitor (Cd) charged at DC voltage of specified.
R3
Discharge
Test
10
(Application:
Type GC)
Dielectric
Strength
10kV
In accordance with item No.4
R1
V
Ct
R2
Cd
Ct: Capacitor under test Cd: 0.001μF
R1: 1,000Ω R2: 100MΩ R3: Surge resistance
11
Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
10N, 10±1s
Glass Epoxy Board
Fig. 1
*1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
178
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GA3 Series Specifications and Test Methods
Continued from the preceding page.
6ˆLÀ>̈œ˜Ê
,iÈÃÌ>˜Vi
°°
Q
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each of 3 mutually perpendicular
directions (total of 6 hrs.).
Within the specified tolerance
>À°
X7R
-«iVˆvˆV>̈œ˜
D.F.V0.025
QU400+20C*2 (CF30pF)
QU1000
(CU30pF)
SL
Solder resist
Cu
Glass Epoxy Board
No marking defects
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3. The soldering
should be done using the reflow method and should be
conducted with care so that the soldering is uniform and free of
defects such as heat shock.
b
ø4.5
40
d
c
a
13
iviV̈œ˜
Fig. 2
LZW
­““®
4.5Z2.0
4.5Z3.2
5.7Z2.8
5.7Z5.0
14
20 50 Pressurizing
speed: 1.0mm/s
Pressurize
t : 1.6
100
-œ`iÀ>LˆˆÌÞʜvÊ
/iÀ“ˆ˜>̈œ˜
««i>À>˜Vi
>«>VˆÌ>˜ViÊ
>˜}i
,iÈÃÌ>˜ViÊ
15 ̜Ê-œ`iÀˆ˜}Ê
°,°
i>Ì
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
>
3.5
3.5
4.5
4.5
ˆ“i˜Ãˆœ˜Ê­““®
L
V
7.0
2.4
7.0
3.7
8.0
3.2
8.0
5.6
R230
>À°
X7R
SL
>«>VˆÌ>˜ViÊ >˜}i
Within ±10%
Within ±2.5% or ±0.25pF
(Whichever is larger)
More than 1,000MΩ
Flexure=1
`
Capacitance meter
45
1.0
75% of the terminations are to be soldered evenly and continuously.
No marking defects
45
(in mm)
Fig. 3
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in solder solution for 2±0.5 sec.
Immersing speed: 25±2.5mm/s
Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)
235±5°C H60A or H63A Eutectic Solder
Preheat the capacitor as in table. Immerse the capacitor in
solder solution at 260±5°C for 10±1 sec. Let sit at room
condition*1 for 24±2 hrs., then measure.
U““iÀȘ}Êëii`: 25±2.5mm/s
U*ÀiÌÀi>̓i˜ÌÊvœÀÊ8Ç,ÊV >À°
W 0
Perform a heat treatment at 150Y10
°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*1
**Ài i>̈˜}
In accordance with item No.4
For General Purpose
GRM/GRJ/GR3 Series
12
No defects or abnormalities
Only for Applications
>«>VˆÌ>˜Vi
/iÃÌÊiÌ œ`
AC250V Type
GA2 Series
««i>À>˜Vi
-«iVˆvˆV>̈œ˜Ã
-Ìi«
1
2
/i“«iÀ>ÌÕÀi
100 to 120°C
170 to 200°C
/ˆ“i
1 min.
1 min.
*1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
179
Safety Standard
Certified GA3 Series
Ìi“
Product Information
ϡ
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GA3 Series Specifications and Test Methods
Continued from the preceding page.
ϡ
Ìi“
For General Purpose
GRM/GRJ/GR3 Series
««i>À>˜Vi
>«>VˆÌ>˜ViÊ
>˜}i
°°
Q
Only for Applications
16
/i“«iÀ>ÌÕÀiÊ
ÞVi
-«iVˆvˆV>̈œ˜Ã
No marking defects
>À°
X7R
SL
>À°
X7R
SL
>«>VˆÌ>˜ViÊ >˜}i
Within ±15%
Within ±2.5% or ±0.25pF
(Whichever is larger)
-«iVˆvˆV>̈œ˜
D.F.V0.05
QU400+20C*2 (CF30pF)
QU1000
(CU30pF)
°,°
More than 3,000MΩ
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
/iÃÌÊiÌ œ`
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24±2 hrs. at room condition,*1 then measure.
-Ìi«
1
2
3
4
/i“«iÀ>ÌÕÀiÊ­c ®
Min. Operating Temp.±3
Room Temp.
Max. Operating Temp.±2
Room Temp.
/ˆ“iÊ­“ˆ˜°®
30±3
2 to 3
30±3
2 to 3
U*ÀiÌÀi>̓i˜ÌÊvœÀÊ8Ç,ÊV >À°
0
Perform a heat treatment at 150W
Y10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*1
Solder resist
Cu
Glass Epoxy Board
AC250V Type
GA2 Series
Fig. 4
««i>À>˜Vi
>«>VˆÌ>˜ViÊ
>˜}i
Safety Standard
Certified GA3 Series
Փˆ`ˆÌÞÊ
£Ç ­-Ìi>`ÞÊ
Ê-Ì>Ìi®
°°
Q
>À°
X7R
SL
>À°
X7R
SL
>«>VˆÌ>˜ViÊ >˜}i
Within ±15%
Within ±5.0% or ±0.5pF
(Whichever is larger)
-«iVˆvˆV>̈œ˜
D.F.V0.05
QU275+5/2C*2 (CF30pF)
QU350
(CU30pF)
°,°
More than 3,000MΩ
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
««i>À>˜Vi
No marking defects
Product Information
>«>VˆÌ>˜ViÊ
>˜}i
°°
Q
18 ˆvi
No marking defects
°,°
>À°
X7R
SL
>À°
X7R
SL
>«>VˆÌ>˜ViÊ >˜}i
Within ±20%
Within ±3.0% or ±0.3pF
(Whichever is larger)
-«iVˆvˆV>̈œ˜
D.F.V0.05
QU275+5/2C*2 (CF30pF)
QU350
(CU30pF)
More than 3,000MΩ
Before this test, the test shown in the following is performed.
·Item 11 Adhesive Strength of Termination (applied force is 5N)
·Item 13 Deflection
Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%
W24
for 500Y
0 hrs.
Remove and let sit for 24±2 hrs. at room condition,*1 then
measure.
U*ÀiÌÀi>̓i˜ÌÊvœÀÊ8Ç,ÊV >À°
0
Perform a heat treatment at 150W
Y10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*1
Before this test, the test shown in the following is performed.
·Item 11 Adhesive Strength of Termination (apply force is 5N)
·Item 13 Deflection
Impulse Voltage
Each individual capacitor should
be subjected to a 2.5kV (Type
GC/GF: 5kV) Impulse (the
voltage value means zero to
peak) for three times. Then the
capacitors are applied to life test.
GB
In accordance with item No.4
100
90
50
(%)
30
0
t
T
T1
T2
Apply voltage as in Table for 1,000 hrs. at 125W2
Y0°C, relative
humidity 50% max.
/Þ«i
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
Front time (T1)=1.2μs=1.67T
Time to half-value (T2)=50μs
GC
GD
««ˆi`Ê6œÌ>}i
AC312.5V (r.m.s.), except that once each hour the
voltage is increased to AC1,000V (r.m.s.) for 0.1 sec.
AC425V (r.m.s.), except that once each hour the
voltage is increased to AC1,000V (r.m.s.) for 0.1 sec.
Let sit for 24±2 hrs. at room condition,*1 then measure.
U*ÀiÌÀi>̓i˜ÌÊvœÀÊ8Ç,ÊV >À°
0
Perform a heat treatment at 150W
Y10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*1
*1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
180
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GA3 Series Specifications and Test Methods
Continued from the preceding page.
Humidity
œ>`ˆ˜}
°°
Q
No marking defects
>À°
X7R
SL
>À°
X7R
SL
>«>VˆÌ>˜ViÊ >˜}i
Within ±15%
Within ±5.0% or ±0.5pF
(Whichever is larger)
-«iVˆvˆV>̈œ˜
D.F.V0.05
QU275+5/2C*2 (CF30pF)
QU350
(CU30pF)
°,°
More than 3,000MΩ
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
Before this test, the test shown in the following is performed.
·Item 11 Adhesive Strength of Termination (apply force is 5N)
·Item 13 Deflection
Apply the rated voltage at 40±2°C and relative humidity of 90 to
W24
95% for 500Y
0 hrs. Remove and let sit for 24±2 hrs. at room
1
condition,* then measure.
U*ÀiÌÀi>̓i˜ÌÊvœÀÊ8Ç,ÊV >À°
0
Perform a heat treatment at 150W
Y10°C for 60±5 min. and then
let sit for 24±2 hrs. at room condition.*1
The capacitor should be individually wrapped in at least one but
not more than two complete layers of cheesecloth. The
capacitor should be subjected to 20 discharges. The interval
between successive discharges should be 5 sec. The UAC
should be maintained for 2 min. after the last discharge.
F
S1
Tr
S2
C1
UAC
L1
R
L2
C2
C3
L3
Cx
Ct
Ut
L4
For General Purpose
GRM/GRJ/GR3 Series
>«>VˆÌ>˜ViÊ
>˜}i
/iÃÌÊiÌ œ`
Only for Applications
««i>À>˜Vi
19
-«iVˆvˆV>̈œ˜Ã
Item
AC250V Type
GA2 Series
ϡ
The cheesecloth should not be on fire.
C1,2
L1 to 4
Ct
Cx
F
: 1μF±10%
C3
: 0.033μF±5% 10kV
: 1.5mH±20% 16A Rod core choke
: 3μF±5% 10kV
R
: 100Ω±2%
: Capacitor under test
UAC : UR±5%
: Rated Voltage
: Fuse, Rated 16A
UR
: Voltage applied to Ct
Ut
Ux
Type
GD, GB
GC, GF
Ui
Ui
2.5kV
5kV
time
The burning time should not exceed 30 sec.
The tissue paper should not ignite.
Test Specimen
45°
200±5mm
Passive
Flammability
About 8mm
21
The capacitor under test should be held in the flame in the
position which best promotes burning. Each specimen should
be exposed to the flame only once. Time of exposure to flame:
30 sec.
Length of flame : 12±1mm
Gas burner
: Length 35mm min.
Inside Dia. 0.5±0.1mm
Outside Dia. 0.9mm max.
Gas
: Butane gas Purity 95% min.
Tissue
About 10mm Thick Board
*1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
181
Product Information
Active
Flammability
Safety Standard
Certified GA3 Series
Oscilloscope
20
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM/GRJ/GR3/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example)
c Capacitance - Temperature Characteristics
C0G/U2J/SL Characteristics
X7R Characteristics
For General Purpose
GRM/GRJ/GR3 Series
20
30
15
20
U2J
X7R Char. Spec.(upper)
5
C0G
SL
0
U2J
C0G
–5
Cap. Change (%)
Cap. Change (%)
10
10
0
-10
Only for Applications
–10
SL
–20
–60
X7R Char. Spec.(lower)
-20
–15
–40 –20
0
20
40
60
80
-30
-60
100 120 140
-40
-20
0
20
40
60
80
100 120 140
Temperature (°C)
Temperature (°C)
GR4 Series
X7T Characteristics
30
20
AC250V Type
GA2 Series
15
20
Cap. Change (%)
Cap. Change (%)
10
5
0
-5
10
0
Safety Standard
Certified GA3 Series
–10
–10
–20
–15
–20
–60
–40 –20
0
20
40
60
80
–30
–60
100 120 140
–40 –20
0
Temperature (°C)
20
40
60
80
100 120 140
Temperature (°C)
GRM Series (C0G Char. 250V)
GRM Series (C0G Char. 630V)
100k
10k
10k
1k
22pF
10pF
1k
47pF
100pF
Z (Ω)
100
Z (Ω)
Product Information
Reference Data
c Impedance - Frequency Characteristics
47pF
100
10
10
1
100m
1M
10pF
470pF
100pF
1000pF
1
10M
100M
Frequency (Hz)
1G
10G
100m
1M
10M
100M
1G
10G
Frequency (Hz)
Continued on the following page.
182
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM/GRJ/GR3/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example)
Continued from the preceding page.
c Impedance - Frequency Characteristics
GRM Series (X7R Char. 250V)
For General Purpose
GRM/GRJ/GR3 Series
GRM Series (C0G Char. 1kV)
100k
1k
10k
100
10pF
1000pF
1k
10
Z (Ω)
Z (Ω)
22pF
47pF
100
10000pF
100000pF
100pF
1
100m
1
10M
100M
1G
10m
1M
10G
10M
Frequency (Hz)
100M
1G
Frequency (Hz)
GRM Series (X7R Char. 630V)
GRJ Series (X7R Char. 250V)
100
1k
(1)
(2)
100
10
(3)
(1) GRJ21AR72E102KWJ1D
(2) GRJ21BR72E103KWJ3L
(3) GRJ31BR72E223KWJ1L
(4) GRJ31CR72E473KWJ3L
(5) GRJ31CR72E104KWJ3L
(6) GRJ55DR72E105KWJ1L
(4)
100000pF
Z (Ω)
10
10000pF
(5)
1
1
Safety Standard
Certified GA3 Series
1000pF
(6)
0.1
100m
10M
100M
Frequency (Hz)
1G
0.01
1M
10M
100M
1G
Frequency (Hz)
GR3 Series (X7T Char. 250V)
GR4 Series
1k
100
(1)
100
10
(1) GR321AD72E103KW01D
(2) GR332QD72E104KW01L
(3) GR355XD72E105KW05L
(2)
1
100pF
1000pF
10
Z (Ω)
Z (Ω)
Product Information
Reference Data
10m
1M
4700pF
1
(3)
0.1
100m
0.01
1M
10M
100M
10m
1M
1G
10M
Frequency (Hz)
GA3 Series (Type GF)
1k
1K
100
100
1000pF
1000pF
10
Z (Ω)
10
Z (Ω)
1G
Frequency (Hz)
GA2 Series
10000pF
100000pF
2200pF
1
1
100m
100m
10m
1M
100M
10m
1M
10M
100M
Frequency (Hz)
1G
10M
100M
AC250V Type
GA2 Series
100m
1M
Z (Ω)
Only for Applications
10
1G
Frequency (Hz)
Continued on the following page.
183
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
GRM/GRJ/GR3/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example)
Continued from the preceding page.
c Impedance - Frequency Characteristics
GA3 Series (Type GD)
GA3 Series (Type GB)
For General Purpose
GRM/GRJ/GR3 Series
100
1K
150pF
100
10
1000pF
10000pF
Z (Ω)
Z (Ω)
10
2200pF
1
1
Only for Applications
56000pF
0.1
100m
33000pF
10m
1M
10M
100M
0.01
1M
1G
10M
100M
1G
Frequency (Hz)
Frequency (Hz)
c Capacitance - AC Voltage Characteristics
GA3 Series (Type GF/GD, X7R Char.)
GA3 Series (Type GB)
AC250V Type
GA2 Series
at Room Condition (25°C)
60
40
40
20
20
Cap. Change (%)
Safety Standard
Certified GA3 Series
Cap. Change (%)
at Room Condition (25°C)
60
0
-20
33000pF
0
56000pF
-20
-40
-40
-60
10000pF
500
0
1000
1500
-60
2000
0
50
100
150
200
250
300
AC Voltage [V(r.m.s.)]
AC Voltage [V(r.m.s.)]
GRM/GR3 Series
GR7 Series
20
20
0
0
-20
-20
(2)
(1) GRM55DR72E105KW01L
(2) GR355XD72E105KW05L
-40
-60
Cap. Change (%)
Cap. Change (%)
Product Information
Reference Data
c Capacitance - DC Bias Characteristics
(1) GR721AW0BB103KW01D
GR721AW0BB153KW01D
GR721BW0BB223KW03L
GR731AW0BB223KW01D
GR721BW0BB273KW03L
GR731AW0BB273KW01D
GR731AW0BB333KW01D
(2)
-40
(1)
-60
(2) GR731AW0BB103KW01D
GR731AW0BB153KW01D
GR731BW0BB223KW01L
GR731BW0BB333KW01L
GR731CW0BB473KW03L
(1)
-80
-100
-80
0
50
100
150
DC Bias (V)
184
200
250
-100
0
50
100
150
200
DC Bias (V)
250
300
350
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Package
Taping is the standard packaging method.
1.6
0.8
0.8
4,000
-
GRJ21/GRM21/GR321/
GR721
2.0
1.25
GRJ31/GRM31/GR331/
GR731
3.2
1.6
GRM42/GR442
4.5
4.5
2.5
2.0
3.2
4,000
-
-
3,000
1.0
4,000
-
1.25
-
3,000
1.6
-
2,000
1.0
4,000
-
1.25
-
3,000
1.5
-
2,000
2.0
-
1,000
1.0
-
3,000
1.5
-
2,000
1.5
-
1,000
2.0
-
1,000
2.5
-
500
GRM55
5.7
5.0
1.5
-
1,000
GRJ55/GRM55/GR355/
GR455
5.7
5.0
2.0
-
1,000
GR355
5.7
5.0
2.7
-
500
GA242
4.5
2.0
1.5
-
2,000
GA243
4.5
3.2
1.5
-
1,000
2.0
-
1,000
GA255
5.7
5.0
2.0
-
1,000
1.0
-
3,000
1.5
-
2,000
2.0
-
2,000
1.5
-
1,000
2.0
-
1,000
1.5
-
1,000
1.5
-
1,000
2.0
-
1,000
2.5
-
500
2.7
-
500
2.9
-
GA342
Safety Std.
Certification
3.2
1.0
1.25
4.5
2.0
GA343
4.5
3.2
GA352
5.7
2.8
GA355
5.7
5.0
Only for Applications
Embossed Tape
GRM18
AC250V Type
GA2 Series
Paper Tape
Safety Standard
Certified GA3 Series
T
Product Information
Package
W
GRJ43/GRM43/GR343/
GR443
AC250V
ø180mm Reel
L
GRJ32/GRM32/GR332
250Vdc min.
For General Purpose &
Only for Applications
Quantity (pcs.)
Dimensions (mm)
Part Number
For General Purpose
GRM/GRJ/GR3 Series
c Minimum Quantity Guide
500
Continued on the following page.
185
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Package
Continued from the preceding page.
c Tape Carrier Packaging
w Paper Tape
Cover Tape: 0.06mm in thickness
Top Tape: 0.05mm in thickness
Sprocket Hole: As specified in (2)
Sprocket Hole: As specified in (2)
Cavity for Chip: As specified in (2)
Cavity for Chip: As specified in (2)
Only for Applications
Bottom Tape: 0.05mm in thickness
Base Tape: As specified in (2)
Packed Chips Chip
Base Tape: As specified in (2)
Packed Chips Chip
8mm width, 4mm pitch Tape
12mm width, 8mm/4mm pitch Tape
W0.1
1.75±0.1
Product Information
Package
Direction of Feed
GRJ21/GRM21/GR321/GR721
(TU1.25mm)
GRJ31/GRM31/GR331/GR731
(TU1.25mm)
GRJ32/GRM32/GR332
(TU1.25mm)
A
Direction of Feed
B*
1.45
0.3±0.1
1.75±0.1
4.0±0.1
2.5 max.
A*
ø1.5Y0
B
B
A
Part Number
2.0±0.05
2.25
2.0
3.6
2.9
3.6
12.0±0.3
2.0±0.05
8.0±0.1*1
8.0±0.3
4.0±0.1
0.25±0.1
3.5±0.05
Safety Standard
Certified GA3 Series
4.0±0.05
W0.1
ø1.5Y0
3.7 max.
Part Number
A*
B*
GRM42/GR442/GA242/GA342
2.5
5.1
GRJ43/GRM43/GR343/GR443/GA243/GA343
3.6
4.9
GA352
3.2
6.1
GRJ55/GRM55/GR355/GR455/GA255/GA355
5.4
6.1
*1 4.0±0.1mm in case of GRM42/GR442/GA242/GA342
*Nominal Value
*Nominal Value
(in mm)
w Paper Tape
8mm width, 4mm pitch Tape
4.0±0.1
W0.1
ø1.5Y0
2.0±0.05
B
A
Direction of Feed
A*
B*
GRM18
Part Number
1.05
1.85
GRJ21/GRM21/GR321/GR721
(T=1.0mm)
1.45
2.25
GRM31/GR331/GR731
(T=1.0mm)
2.0
3.6
GRM32
(T=1.0mm)
2.9
3.6
1.1 max.
1.75±0.1
8.0±0.3
4.0±0.1
3.5±0.05
AC250V Type
GA2 Series
(2) Dimensions of Tape
q Embossed Tape
5.5±0.05
For General Purpose
GRM/GRJ/GR3 Series
(1) Appearance of Taping
q Embossed Tape
*Nominal Value
(in mm)
Continued on the following page.
186
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Package
Continued from the preceding page.
(3) Dimensions of Reel
For General Purpose
GRM/GRJ/GR3 Series
13.0±1.0 (Tape width 8mm)
17.0±1.0 (Tape width 12mm)
2.0±0.5
180 +0
-1.5
Only for Applications
ø21±0.8
+1.0
9.0 -0 (Tape width 8mm)
+1.0
13.0 -0 (Tape width 12mm)
Vacant section
Chip mounting unit Vacant section
160 min.
190 min.
210 min.
(Top Tape or Cover Tape alone)
Direction of feed
(in mm)
Product Information
Package
(4) Taping Method
q Tapes for capacitors are wound clockwise. The
sprocket holes are to the right as the tape is pulled
toward the user.
w Part of the leader and part of the empty tape should be
attached to the end of the tape as shown at right.
e The top tape or cover tape and base tape are not
attached at the end of the tape for a minimum of 5
pitches.
r Missing capacitors number within 0.1% of the number
per reel or 1 pc, whichever is greater, and are not
continuous.
t The top tape or cover tape and bottom tape should not
protrude beyond the edges of the tape and should not
cover sprocket holes.
y Cumulative tolerance of sprocket holes, 10 pitches:
±0.3mm.
u Peeling off force: 0.1 to 0.6N in the direction shown at
right.
AC250V Type
GA2 Series
(in mm)
Safety Standard
Certified GA3 Series
+1
60 -0
ø13±0.2
165 to
180°
Top Tape or Cover Tape
Base Tape
187
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution/Notice
For General Purpose
GRM/GRJ/GR3 Series
!Caution
Notice
c Storage and Operation Conditions ........................ 189
c Rating .................................................................... 195
1. Capacitance Change of Capacitor..................... 195
c Rating .................................................................... 189
2. Performance Check by Equipment .................... 195
1. Operating Voltage.............................................. 189
Only for Applications
2. Operating Temperature, Self-generated Heat,
and Load Reduction at High-frequency Voltage
Condition ........................................................... 189
c Soldering and Mounting ........................................ 195
3. Fail-safe ............................................................. 191
2. Mounting of Chips.............................................. 196
4. Test Condition for AC Withstanding Voltage ..... 191
3. Soldering ........................................................... 197
(1) Test Equipment ............................................ 191
(1) Limit of losing effective area of the
terminations and conditions needed
for soldering. ................................................ 197
AC250V Type
GA2 Series
(2) Voltage Applied Method ............................... 191
1. Construction of Board Pattern ........................... 195
(2) Flux Application ............................................ 197
c Soldering and Mounting ........................................ 191
(3) Solder ........................................................... 197
1. Vibration and Impact.......................................... 191
4. Cleaning ............................................................ 197
Safety Standard
Certified GA3 Series
2. Circuit Board Material ........................................ 191
5. Resin Coating .................................................... 197
Product Information
!Caution/Notice
7. Washing............................................................. 194
3. Land Layout for Cropping PC Board ................. 191
4. Reflow Soldering ............................................... 192
5. Flow Soldering ................................................... 193
6. Correction with a Soldering Iron ........................ 194
8. Handling ............................................................ 194
188
C02E.pdf
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
c Storage and Operation Conditions
Only for Applications
For General Purpose
GRM/GRJ/GR3 Series
Do not use or store capacitors in a corrosive
atmosphere, especially where chloride gas, sulfide
gas, acid, alkali, salt or the like are present. In
addition, avoid exposure to moisture. Before cleaning,
bonding or molding this product, verify that these
processes do not affect product quality by testing the
performance of a cleaned, bonded or molded product
in the intended equipment. Store the capacitors
where the temperature and relative humidity do not
exceed 5 to 40 degrees centigrade and 20 to 70%.
Use capacitors within 6 months of delivery.
Check the solderability after 6 months or more.
Positional
Measurement
DC Voltage
V0-p
DC+AC Voltage
V0-p
AC Voltage
Vp-p
Pulse Voltage (1)
Vp-p
Pulse Voltage (2)
Safety Standard
Certified GA3 Series
Voltage
When DC-rated capacitors are to be used in input circuits
from a commercial power source (AC filter), be sure to
use Safety Certified Capacitors because various
regulations for withstanding voltage or impulses,
established for all equipment, should be taken into
consideration.
Product Information
!Caution
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p which contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes these
irregular voltages.
AC250V Type
GA2 Series
c Rating
Vp-p
2. Operating Temperature, Self-generated Heat, and Load Reduction at High-frequency Voltage Condition
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range.
Be sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a highfrequency voltage, pulse voltage, it may self-generate
heat due to dielectric loss.
(1) In the case of X7R, X7T char.
Applied voltage should be the load such as selfgenerated heat is within 20°C on the condition of
atmosphere temperature 25°C. When measuring, use a
thermocouple of small thermal capacity -K of ø0.1mm
in conditions where the capacitor is not affected by
radiant heat from other components or surrounding
ambient fluctuations. Excessive heat may lead to
deterioration of the capacitor's characteristics and
reliability. (Never attempt to perform measurement
with the cooling fan running. Otherwise, accurate
measurement cannot be ensured.)
Continued on the following page.
189
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
Continued from the preceding page.
C0G char., Rated Voltage: DC250V
C0G char., Rated Voltage: DC630V
Allowable voltage [Vp-p]
Allowable voltage [Vp-p]
1000
to 100pF
(250)
1
10
100
Frequency [kHz]
820pF
1000pF
1
10
100
Frequency [kHz]
U2J char., Rated Voltage: DC250V
Allowable voltage [Vp-p]
27 to 47pF
(3150)
1000
1
10
100
Frequency [kHz]
1000
(250)
10,000pF
U2J char., Rated Voltage: DC1kV
2,200pF
4,700pF
100
10,000pF
1
10
100
Frequency [kHz]
1000
Allowable voltage [Vp-p]
1,000pF
1000
1
10
100
Frequency [kHz]
2,200pF
4,700pF
10,000pF
100
22,000pF
47,000pF
10
(500)1000
to 680pF
1,000pF
1
U2J char., Rated Voltage: DC2kV
to 470pF
1000
10
100
Frequency [kHz]
U2J char., Rated Voltage: DC630V
1000
10000
to 100pF
150pF
220pF
1000
100
10
100
Frequency [kHz]
U2J char., Rated Voltage: DC3.15kV
10000
10000
(1000)
1000
to 4,700pF
100
to 100pF
100
1
1000
1000
to 22pF
10
560pF
680pF
100
C0G char., Rated Voltage: DC3.15kV
C0G char., Rated Voltage: DC1kV
10000
to 470pF
(630)
1000
10000
Allowable voltage [Vp-p]
Product Information
!Caution
100
Allowable voltage [Vp-p]
Safety Standard
Certified GA3 Series
1000
Allowable voltage [Vp-p]
AC250V Type
GA2 Series
The temperature of the surface
of capacitor: 125˚C or less (including self-heating)
1
10
100
Frequency [kHz]
(500)1000
Allowable voltage [Vp-p]
Only for Applications
<C0G char., Rated Voltage: DC3.15kV>
The capacitors less than 22pF can be applied maximum
4.0kV peak to peak at 100kHz or less only for the ballast
or the resonance usage in the LCD backlight inverter
circuit.
<Capacitor Selection Tool>
We are also offering free software/the capacitor selection
tool: "Murata Medium Voltage Capacitors Selection Tool
by Voltage Form," which will assist you in selecting a
suitable capacitor.
The software can be downloaded from Murata's Website.
(http://www.murata.com/designlib/mmcsv/index.html).
By inputting capacitance values and the applied voltage
waveform of the specific capacitor series, this software
will calculate the capacitor's power consumption and list
suitable capacitors (non-sine wave is also available).
Allowable voltage [Vp-p]
For General Purpose
GRM/GRJ/GR3 Series
(2) In case of C0G, U2J char.
Due to the low self-heating characteristics of
low-dissipation capacitors, the allowable electric power of
these capacitors is generally much higher than that of
X7R characteristic capacitors.
When a high frequency voltage that causes 20°C selfheating to the capacitor is applied, it will exceed the
capacitor's allowable electric power.
The frequency of the applied sine wave voltage should be
less than 500kHz (less than 100kHz in the case of rated
voltage: DC3.15kV). The applied voltage should be less
than the value shown in figure below.
In the case of non-sine wave that includes a harmonic
frequency, please contact our sales representatives or
product engineers. Excessive heat may lead to
deterioration of the capacitor's characteristics and
reliability. (Never attempt to perform measurement with
the cooling fan running. Otherwise, accurate
measurement cannot be ensured.)
to 33pF
47pF
100pF
(3150)
1000
1
10
100
Frequency [kHz]
1000
The sine-wave frequency VS allowable voltage
Continued on the following page.
190
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
(2) Voltage Applied Method
The capacitor's leads or terminals should be firmly
connected to the output of the withstanding voltage test
equipment, and then the voltage should be raised from
near zero to the test voltage. If the test voltage is applied
directly to the capacitor without raising it from near zero,
it should be applied with the zero cross.* At the end of the
test time, the test voltage should be reduced to near zero,
and then the capacitor's leads or terminals should be
taken off the output of the withstanding voltage test
equipment. If the test voltage is applied directly to the
capacitor without raising it from near zero, surge voltage
may occur and cause a defect.
*ZERO CROSS is the point where voltage sine wave
passes 0V.
- See the figure at right -
Voltage sine wave
Only for Applications
AC IN
AC250V Type
GA2 Series
4. Test Condition for AC Withstanding Voltage
(1) Test Equipment
Tests for AC withstanding voltage should be made with
equipment capable of creating a wave similar to a
50/60 Hz sine wave.
If the distorted sine wave or overload exceeding the
specified voltage value is applied, a defect may be
caused.
FUSE
Safety Standard
Certified GA3 Series
3. Fail-safe
Failure of a capacitor may result in a short circuit. Be sure
to provide an appropriate fail-safe function such as a fuse
on your product to help eliminate possible electric shock,
fire, or fumes.
Please consider using fuses on each AC line if the
capacitors are used between the AC input lines and earth
(line bypass capacitors), to prepare for the worst case,
such as a short circuit.
For General Purpose
GRM/GRJ/GR3 Series
Continued from the preceding page.
Product Information
!Caution
0V
zero cross
Soldering and Mounting
1. Vibration and Impact
Do not expose a capacitor to excessive shock or vibration
during use.
2. Circuit Board Material
It is possible for the chip to crack by the expansion and
shrinkage of a metal board.
Please contact us if you want to use our ceramic
capacitors on a metal board such as Aluminum.
3. Land Layout for Cropping PC Board
Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board.
[Component Direction]
[Chip Mounting Close to Board Separation Point]
Locate chip
horizontal to the
direction in which
stress acts.
<Example
to be avoided>
<Example
of improvement>
C
Perforation
B
D
A
Chip arrangement
Worst AGCGB~D Best
Slit
Continued on the following page.
191
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
Continued from the preceding page.
For General Purpose
GRM/GRJ/GR3 Series
Only for Applications
AC250V Type
GA2 Series
4. Reflow Soldering
When components are exposed to sudden heat, their
mechanical strength can be decreased due to the
extreme temperature changes which can cause flexing
and result in internal mechanical damage, which will
cause the parts to fail. In order to prevent mechanical
damage, preheating is required for both the components
and the PCB board. Preheating conditions are shown in
Table 1. It is required to keep the temperature differential
between the soldering and the components surface (ΔT)
as small as possible.
Solderability of Tin plating termination chips might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chips before use.
When components are immersed in solvent after
mounting, be sure to maintain the temperature difference
(ΔT) between the component and solvent within the
range shown in the Table 1.
[Standard Conditions for Reflow Soldering]
Infrared Reflow
Temperature (D)
Soldering
Peak Temperature
Gradual
Cooling
200°C
ΔT
170°C
150°C
130°C
Preheating
Time
60-120 seconds 30-60 seconds
Vapor Reflow
Temperature (D)
Soldering
Peak Temperature
Gradual
Cooling
ΔT
170°C
150°C
130°C
Table 1
Part Number
Preheating
Temperature Differential
ΔTV190D
G--32/42/43/52/55
ΔTV130D
60-120 seconds
Time
20 seconds max.
Recommended Conditions
Pb-Sn Solder
Infrared Reflow Vapor Reflow
Lead Free Solder
Product Information
!Caution
Peak Temperature
230-250°C
230-240°C
240-260°C
Atmosphere
Air
Air
Air or N2
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
[Allowable Soldering Temperature and Time]
Soldering Temperature (D)
Safety Standard
Certified GA3 Series
G--18/21/31
270
260
250
240
230
0
30
60
90
Soldering Time (sec.)
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
Optimum Solder Amount for Reflow Soldering
Overly thick application of solder paste results in
excessive solder fillet height.
This makes the chip more susceptible to mechanical and
thermal stress on the board and may cause cracked
chips.
Too little solder paste results in a lack of adhesive
strength on the outer electrode, which may result in chips
breaking loose from the PCB.
Make sure the solder has been applied smoothly to the
end surface to a height of 0.2mm min.
[Optimum Solder Amount for Reflow Soldering]
0.2mm min.
in section
Inverting the PCB
Make sure not to impose an abnormal mechanical shock on
the PCB.
Continued on the following page.
192
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
Continued from the preceding page.
Soldering
Gradual
Cooling
ΔT
170°C
150°C
130°C
60-120 seconds
Only for Applications
Preheating
Time
5 seconds max.
[Allowable Soldering Temperature and Time]
AC250V Type
GA2 Series
270
260
250
240
230
0
Part Number
For General Purpose
GRM/GRJ/GR3 Series
Temperature (D)
Peak Temperature
10
Temperature Differential
20
30
Soldering Time (sec.)
Safety Standard
Certified GA3 Series
Table 2
[Standard Conditions for Flow Soldering]
Soldering Temperature (D)
5. Flow Soldering
When components are exposed to sudden heat, their
mechanical strength can be decreased due to the
extreme temperature changes which can cause flexing
and result in internal mechanical damage, which will
cause the parts to fail. Additionally, an excessively long
soldering time or high soldering temperature results in
leaching by the outer electrodes, causing poor adhesion
or a reduction in capacitance value due to loss of contact
between electrodes and end termination.
In order to prevent mechanical damage, preheating is
required for both the components and the PCB board.
Preheating conditions are shown in Table 2. It is required
to keep temperature differential between the soldering
and the components surface (ΔT) as small as possible.
When components are immersed in solvent after
mounting, be sure to maintain the temperature difference
between the component and solvent within the range
shown in Table 2.
Do not apply flow soldering to chips not listed in Table 2.
ΔTV150D
G--18/21/31
In the case of repeated soldering, the accumulated
soldering time must be within the range shown above.
Recommended Conditions
Pb-Sn Solder
Lead Free Solder
Peak Temperature
240-250°C
250-260°C
Atmosphere
Air
N2
Product Information
!Caution
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
Optimum Solder Amount for Flow Soldering
The top of the solder fillet should be lower than the
thickness of components. If the solder amount is
excessively large, the risk of cracking is higher during
board bending or under any other stressful conditions.
Up to Chip Thickness
Adhesive
in section
Continued on the following page.
193
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
Continued from the preceding page.
For General Purpose
GRM/GRJ/GR3 Series
Only for Applications
6. Correction with a Soldering Iron
When sudden heat is applied to the components by use
of a soldering iron, the mechanical strength of the
components will decrease because the extreme
temperature change causes deformations inside the
components.
In order to prevent mechanical damage to the
components, preheating is required for both the
components and the PCB board.
Preheating conditions, (The "Temperature of the
Soldering Iron Tip", "Preheating Temperature,"
"Temperature Differential" between iron tip and the
components and the PCB), should be within the
conditions of table 3.
It is required to keep the temperature differential between
the soldering Iron and the component's surface (ΔT) as
small as possible.
After soldering, do not allow the component/PCB to cool
down rapidly.
The operating time for the re-working should be as short
as possible. When re-working time is too long, it may
cause solder leaching, in turn causing a reduction of the
adhesive strength of the terminations.
Table 3
Part Number
Temperature Preheating Temperature
of Soldering
Differential Atmosphere
Temperature
Iron Tip
(ΔT)
AC250V Type
GA2 Series
G--18/21/31
350°C max. 150°C min.
ΔTV190D
air
G--32/42/43/
52/55
280°C max. 150°C min.
ΔTV130D
air
*Applicable for both Pb-Sn and Lead Free Solder.
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
Safety Standard
Certified GA3 Series
Product Information
!Caution
Optimum Solder Amount when re-working Using a
Soldering Iron
For sizes smaller than Gpp18, the top of the solder fillet
should be lower than 2/3 of the thickness of the
component or 0.5mm whichever is smaller.
For sizes larger than Gpp21, the top of the solder fillet
should be lower than 2/3 of the thickness of the
component.
If the solder amount is excessive, the risk of cracking is
higher during board bending or under any other stressful
conditions.
A Soldering iron ø3mm or smaller should be used.
It is also necessary to keep the soldering iron from
touching the components during the re-work.
Solder wire with ø0.5mm or smaller is required for
soldering.
7. Washing
Excessive output of ultrasonic oscillation during cleaning
causes PCBs to resonate, resulting in cracked chips or
broken solder. Take note not to vibrate PCBs.
8. Handling
Do not directly touch the chip capacitor, especially the
ceramic body. Residue from hands/fingers may create a
short circuit environment.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT AND
FUMING WHEN THE PRODUCT IS USED.
194
Solder Amount
in section
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Notice
Only for Applications
AC250V Type
GA2 Series
2. Performance Check by Equipment
Before using a capacitor, check that there is no
problem in the equipment's performance and the
specifications.
Generally speaking, CLASS 2 (X7R, X7T char.) ceramic
capacitors have voltage dependence characteristics
and temperature dependence characteristics in
capacitance. Therefore, the capacitance value may
change depending on the operating condition in the
equipment.
Accordingly, be sure to confirm the apparatus
performance of receiving influence in a capacitance
value change of a capacitor, such as leakage current
and noise suppression characteristics.
Moreover, check the surge-proof ability of a
capacitor in the equipment, if needed, because the
surge voltage may exceed the specific value by the
inductance of the circuit.
For General Purpose
GRM/GRJ/GR3 Series
Rating
1. Capacitance Change of Capacitor
(1) In the case of X7R, X7T char.
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its
capacitance slightly if the capacitor is left on
for a long time. Moreover, capacitance might change
greatly depending on the surrounding temperature
or an applied voltage. Therefore, it is not likely
to be suitable for use in a time constant circuit.
Please contact us if you need detailed information.
(2) In the case of any char. except X7R, X7T
Capacitance might change a little depending on the
surrounding temperature or an applied voltage.
Please contact us if you intend to use this product
in a strict time constant circuit.
Soldering and Mounting
Safety Standard
Certified GA3 Series
1. Construction of Board Pattern
After installing chips, if solder is excessively applied to
the circuit board, mechanical stress will cause destruction
resistance characteristics to lower. To prevent this, be
extremely careful in determining shape and dimension
before designing the circuit board diagram.
Product Information
Notice
Construction and Dimensions of Pattern (Example)
Flow Soldering
Chip Capacitor
LgW
Solder Resist
c
L
W
b
a
a
b
c
1.6g0.8
0.6-1.0
0.8-0.9
0.6-0.8
2.0g1.25
1.0-1.2
0.9-1.0
0.8-1.1
3.2g1.6
2.2-2.6
1.0-1.1
1.0-1.4
Flow soldering: 3.2g1.6 or less available.
Land
Reflow Soldering
a
b
c
1.6g0.8
LgW
0.6-0.8
0.6-0.7
0.6-0.8
2.0g1.25
1.0-1.2
0.6-0.7
0.8-1.1
3.2g1.6
2.2-2.4
0.8-0.9
1.0-1.4
3.2g2.5
2.0-2.4
1.0-1.2
1.8-2.3
4.5g2.0
2.8-3.4
1.2-1.4
1.4-1.8
4.5g3.2
2.8-3.4
1.2-1.4
2.3-3.0
5.7g2.8
4.0-4.6
1.4-1.6
2.1-2.6
5.7g5.0
4.0-4.6
1.4-1.6
3.5-4.8
(in mm)
Continued on the following page.
195
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Notice
Continued from the preceding page.
Dimensions of Slit (Example)
For General Purpose
GRM/GRJ/GR3 Series
Chip Capacitor
Slit
Solder Resist
d
L
e
W
Land
Only for Applications
AC250V Type
GA2 Series
Preparing the slit helps flux cleaning and resin
coating on the back of the capacitor.
However, the length of the slit design should
be as short as possible to prevent mechanical
damage in the capacitor.
A longer slit design might receive more severe
mechanical stress from the PCB.
Recommended slit design is shown in the
Table.
LgW
d
e
1.6g0.8
-
-
2.0g1.25
-
-
3.2g1.6
1.0-2.0
3.2-3.7
3.2g2.5
1.0-2.0
4.1-4.6
4.5g2.0
1.0-2.8
3.6-4.1
4.5g3.2
1.0-2.8
4.8-5.3
5.7g2.8
1.0-4.0
4.4-4.9
5.7g5.0
1.0-4.0
6.6-7.1
(in mm)
Land Layout to Prevent Excessive Solder
Mounting Close to a Chassis
d1
Chassis
Mounting with Leaded Components
Safety Standard
Certified GA3 Series
Solder (Ground solder)
Mounting Leaded Components Later
Soldering Iron
Lead Wire of
Component to be
Connected Later.
Lead Wire Connected
to a Part Provided
with Lead Wires.
Examples
to Be Avoided
Adhesive
Base board
in section
Land Pattern
d2
Product Information
Notice
Examples of
Improvements
by the Land
Division
in section
Solder Resist
d1<d2
in section
Solder Resist
Solder Resist
in section
in section
in section
2. Mounting of Chips
Thickness of adhesives applied
Keep thickness of adhesives applied (50-105μm or more)
to reinforce the adhesive contact considering the
thickness of the termination or capacitor (20-70μm) and
the land pattern (30-35μm).
Mechanical shock of the chip placer
When the positioning claws and pick-up nozzle are worn,
the load is applied to the chip while positioning is
concentrated in one position, thus causing cracks,
breakage, faulty positioning accuracy, etc.
Careful checking and maintenance are necessary to
prevent unexpected trouble.
An excessively low bottom dead point of the suction
nozzle imposes great force on the chip during mounting,
causing cracked chips. Please set the suction nozzle's
bottom dead point on the upper surface of the board.
Continued on the following page.
196
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Oct.1,2012
Notice
A
B
D
C
Termination
Product Information
Notice
Safety Standard
Certified GA3 Series
4. Cleaning
Please confirm there is no problem in the reliability of the
product beforehand when cleaning it with the intended
equipment.
The residue after cleaning it might cause a decrease in
the surface resistance of the chip and the corrosion of the
electrode part, etc. As a result it might cause reliability to
deteriorate. Please confirm beforehand that there is no
problem with the intended equipment in ultrasonic
cleansing.
Only for Applications
Depending on the conditions of the soldering
temperature and/or immersion (melting time),
effective areas may be lost in some parts of the
terminations.
To prevent this, be careful in soldering so that any
possible loss of the effective area on the terminations
will securely remain at a maximum of 25% on all
edge length A-B-C-D-A of part with A, B, C, D, shown
in the Figure below.
(2) Flux Application
An excessive amount of flux generates a large quantity of
flux gas, causing deteriorated solderability. So apply flux
thinly and evenly throughout. (A foaming system is
generally used for flow soldering.)
Flux containing too high a percentage of halide may
cause corrosion of the outer electrodes without sufficient
cleaning. Use flux with a halide content of 0.2% max.
Do not use strong acidic flux.
Do not use water-soluble flux.*
(*Water-soluble flux can be defined as non rosin type flux
including wash-type flux and non-wash-type flux.)
(3) Solder
The use of Sn-Zn based solder will deteriorate the
reliability of the MLCC.
Please contact our sales representative or product
engineers on the use of Sn-Zn based solder in advance.
AC250V Type
GA2 Series
3. Soldering
(1) Limit of losing effective area of the terminations and
conditions needed for soldering.
For General Purpose
GRM/GRJ/GR3 Series
Continued from the preceding page.
5. Resin Coating
Please use it after confirming there is no influence on the
product with the intended equipment before the resin
coating and molding.
A cracked chip might be caused at the cooling/heating
cycle by the amount of resin spreading and/or bias
thickness.
The resin for coating and molding must be selected as
the stress is small when stiffening and the hygroscopic is
low as possible.
197
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
MEMO
198
C02E.pdf
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
For General Purpose KRM/KR3 Series
High Capacitance for General Use
KRM Series
Specifications and Test Methods
Large Capacitance and High Allowable
Ripple Current Type KR3 Series
Specifications and Test Methods
Pa
Package
!Caution/Notice
!C
C
p200
p201
p204
p205
p208
p210
For General Purpose
KRM/KR3 Series
Metal Terminal Monolithic
Ceramic Capacitors
Product Information
Contents
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Metal Terminal Monolithic Ceramic Capacitors
Anti- Deflecting Soldering
crack
crack
noise
High Capacitance for General Use KRM Series
For General Purpose
KRM/KR3 Series
c Features
T
Product Information
1. The product has high reliability against heat and
mechanical impact.
2. Stacking two capacitors reduces the mounting space and
achieves a large capacitance.
3. The unique terminal structure greatly reduces noise from
the ceramics on the board.
e
W
L
Part Number
KRM31F
KRM31K
c Applications
For smoothing and noise suppression of DC-DC converters
KRM55L
KRM55Q
KRM55T
KRM55W
Dimensions (mm)
W
T
L
3.5±0.3
3.5±0.3
3.6±0.3
3.7±0.3
1.7±0.2
1.7±0.2
1.7±0.2
1.85±0.2
6.1±0.4
5.3±0.2
1.9±0.1
2.7±0.2
2.7±0.2
2.7±0.2
2.8±0.2
3.7±0.2
4.8±0.2
6.4±0.3
e
0.8±0.2
1.2±0.2
Do not use these products in any Automotive
Power train or Safety equipment incliding Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
appliations such as Power train and Safety equipment.
Thickness T
max.
(mm)
Metal Terminal
Width e (mm)
1.7
2
0.8±0.2mm
1.7
2.9
0.8±0.2mm
5.3
3
1.2±0.2mm
6.1
5.3
3.9
1.2±0.2mm
33µF±20%
6.1
5.3
5
1.2±0.2mm
47µF±20%
6.1
5.3
6.7
1.2±0.2mm
X7R (EIA)
2.2µF±10%
3.6
1.7
2.9
0.8±0.2mm
50Vdc
X7R (EIA)
4.7µF±10%
3.5
1.7
2.9
0.8±0.2mm
50Vdc
X7R (EIA)
4.7µF±10%
6.1
5.3
3
1.2±0.2mm
KRM55QR71H106KH01K
50Vdc
X7R (EIA)
10µF±10%
6.1
5.3
3.9
1.2±0.2mm
KRM55WR71H226MH01K
50Vdc
X7R (EIA)
22µF±20%
6.1
5.3
6.7
1.2±0.2mm
KRM55LR71J475KH01K
63Vdc
X7R (EIA)
4.7µF±10%
6.1
5.3
3
1.2±0.2mm
KRM55QR71J106KH01K
63Vdc
X7R (EIA)
10µF±10%
6.1
5.3
3.9
1.2±0.2mm
KRM55WR71J226MH01K
63Vdc
X7R (EIA)
22µF±20%
6.1
5.3
6.7
1.2±0.2mm
KRM31KR72A105KH01K
100Vdc
X7R (EIA)
1.0µF±10%
3.5
1.7
2.9
0.8±0.2mm
KRM31KR72A225KH01K
100Vdc
X7R (EIA)
2.2µF±10%
3.7
1.7
2.9
0.8±0.2mm
KRM55LR72A475KH01K
100Vdc
X7R (EIA)
4.7µF±10%
6.1
5.3
3
1.2±0.2mm
KRM55QR72A685KH01K
100Vdc
X7R (EIA)
6.8µF±10%
6.1
5.3
3.9
1.2±0.2mm
KRM55TR72A106MH01K
100Vdc
X7R (EIA)
10µF±20%
6.1
5.3
5
1.2±0.2mm
KRM55WR72A156MH01K
100Vdc
X7R (EIA)
15µF±20%
6.1
5.3
6.7
1.2±0.2mm
Length L
(mm)
Rated Voltage
TC Code
(Standard)
KRM31FR61E106KH01K
25Vdc
X5R (EIA)
10µF±10%
3.5
KRM31KC81E106KH01K
25Vdc
X6S (EIA)
10µF±10%
3.5
KRM55LR71E156KH01K
25Vdc
X7R (EIA)
15µF±10%
6.1
KRM55QR71E226KH01K
25Vdc
X7R (EIA)
22µF±10%
KRM55TR71E336MH01K
25Vdc
X7R (EIA)
KRM55WR71E476MH01K
25Vdc
X7R (EIA)
KRM31KR71H225KH01K
50Vdc
KRM31KR71H475KH01K
KRM55LR71H475KH01K
Part Number
200
Capacitance
Width W
(mm)
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
KRM Series Specifications and Test Methods
Item
Specifications
Test Method
1
Operating
Temperature Range
X5R Char.: -55 to +85°C
X6S Char.: -55 to +105°C
X7R Char.: -55 to +125°C
Reference temperature: 25°C
2
Appearance
No defects or abnormalities
Visual inspection
3
Dimensions
Within the specified dimensions
Using calipers and micrometers
No failure should be observed when voltage in the table is
applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
Dielectric Strength
No defects or abnormalities
5
Insulation Resistance
(I.R.)
[KRM31]
W.V.: 25V
: More than 50MΩ · μF
W.V.: 50V/100V
: More than 500MΩ · μF
[KRM55]
More than 100MΩ · μF
6
Capacitance
Within the specified tolerance
Dissipation
Factor (D.F.)
[KRM31]
W.V.: 25V
: 0.15 max.
W.V.: 50V
: 0.025 max.
W.V.: 100V
: 0.05 max.
[KRM55]
0.025 max.
7
Rated Voltage
DC25V, DC50V, DC63V
DC100V
Test Voltage
250% of the rated voltage
200% of the rated voltage
Product Information
4
The insulation resistance should be measured with Rated
Voltage and within 60±5 sec. of charging.
The capacitance/D.F. should be measured at reference
temperature at the meaning frequency and voltage shown in
the table.
Nominal
Capacitance
C>10μF
CV10μF
Measuring
Frequency
120±24Hz
1±0.2kHz
Measuring
Voltage
AC0.5±0.1V(r.m.s.)
AC1.0±0.2V(r.m.s.)
The capacitance measurement should be made at each step
specified in the Table.
8
Capacitance
Temperature
Characteristics
X5R Char.: Within ±15% (Temp. Range: -55 to +85°C)
X6S Char.: Within ±22% (Temp. Range: -55 to +105°C)
X7R Char.: Within ±15% (Temp. Range: -55 to +125°C)
Step
1
2
3
4
5
Temperature (°C)
25±2
Min. Operating Temp. ±3
25±2
Max. Operating Temp. ±2
25±2
U*ÀiÌÀi>̓i˜Ì
Perform a heat treatment at 150+0/–10°C for 60±5 min. and
then let sit for 24±2 hrs. at room condition. (*1)
A static load of 10N using a pressure rod should be applied to
the center in the direction of the arrow and held for 10 s.
Pressure Rod
Pressure
9
Strength of Metal
Terminal
R 0.5
Termination not to be broken or loosened
0.5L
10
Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
For General Purpose
KRM/KR3 Series
No.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free defects such as heat shock.
10N, 10T1s
Glass Epoxy Board
Fig. 1
(*1) "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
201
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
KRM Series Specifications and Test Methods
Continued from the preceding page.
ϡ
Ìi“
-«iVˆvˆV>̈œ˜Ã
/iÃÌÊiÌ œ`
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz.
The frequency range, from 10 to 55Hz and return to 10Hz,
should be traversed in approximately 1 min. This motion should
be applied for a period of 2 hrs. in each of 3 mutually
perpendicular directions (total of 6 hrs.).
>«>VˆÌ>˜Vi Within the specified tolerance
11
6ˆLÀ>̈œ˜Ê
,iÈÃÌ>˜Vi
D.F.
In accordance with item No.7
Product Information
Solder Resist
Cu
Glass Epoxy Board
No marking defects
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
b
ø4.5
d
40
For General Purpose
KRM/KR3 Series
««i>À>˜Vi No defects or abnormalities
c
12
20 50
iviV̈œ˜
a
t : 1.6
100
/Þ«i
KRM31
KRM55
ˆ“i˜Ãˆœ˜Ê­““®
L
V
5.0
1.65
8.0
5.6
>
2.2
4.5
(in mm)
R4
speed: 1.0mm/s
Pressurize
Flexure: V5
`
1.0
1.0
Capacitance meter
45
Fig. 2
45
(in mm)
Fig. 3
Reflow Soldering: Peak 260+0/-5°C
The area of soldering 230°C min., 20 to 40 s
Let sit for 24±2 h at room condition,* then measure.
U*ÀiÌÀi>̓i˜Ì
Perform the heat treatment at 150+0/-10°C for 60±5 min. and
then let sit for 24±2 h at room condition. (*1)
13
-œ`iÀ>LˆˆÌÞʜvÊ
/iÀ“ˆ˜>̈œ˜
The metal surface is soldered well
300°C
260+0/-5°C
20 to 40 s
230°C min.
200°C
180°C
150°C
100°C
««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
Within ±10%
>˜}i
,iÈÃÌ>˜ViÊ
14 ̜Ê-œ`iÀˆ˜}Ê D.F.
i>Ì
°,°
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.7
In accordance with item No.5
In accordance with item No.4
60 to 120 s
U˜ÊV>ÃiʜvÊ,ivœÜÊ-œ`iÀˆ˜}
See item 13 Solderability of termination
U˜ÊV>ÃiʜvÊ-œ`iÀˆ˜}ÊÀœ˜
Temp. of solder: 350±10°C
Solder time: 4+1/-0 s
Let sit for 24±2 hrs.at room condition,* then measure
Please refer to "Caution (Soldering and Mounting) Correction
with a Soldering Iron"
(*1) "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
202
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
KRM Series Specifications and Test Methods
Continued from the preceding page.
-«iVˆvˆV>̈œ˜Ã
««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
Within ±7.5%
>˜}i
15
D.F.
In accordance with item No.7
I.R.
In accordance with item No.5
/i“«iÀ>ÌÕÀiÊ
ÞVi
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
/iÃÌÊiÌ œ`
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 100 cycles according to the 4 heat treatments listed
in the following table.
Let sit for 24±2 hrs. at room condition,* then measure.
-Ìi«
1
2
3
4
/i“«iÀ>ÌÕÀiÊ­c ®
Min. Operating Temp. ±3
Room Temp.
Max. Operating Temp. ±2
Room Temp.
/ˆ“iÊ­“ˆ˜°®
30±3
2 to 3
30±3
2 to 3
U*ÀiÌÀi>̓i˜Ì
Perform a heat treatment at 150+0/-10°C for 60±5 min. and
then let sit for 24±2 hrs. at room condition. (*1)
In accordance with item No.4
Solder Resist
Cu
Glass Epoxy Board
Fig. 4
««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
Within ±15%
>˜}i
D.F.
[KRM31]
W.V.: 25V
: 0.2 max.
W.V.: 50V/100V
: 0.05 max.
[KRM55]
0.05 max.
I.R.
[KRM31]
W.V.: 25V
: More than 12.5MΩ · μF
W.V.: 50V/100V
: More than 50MΩ · μF
[KRM55]
More than 10MΩ · μF
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
Փˆ`ˆÌÞÊ
16 ­-Ìi>`ÞÊ
-Ì>Ìi®
Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%
for 500+24/-0 hrs.
Remove and let sit for 24±2 hrs. at room condition,* then
measure.
U*ÀiÌÀi>̓i˜Ì
Perform a heat treatment at 150+0/-10°C for 60±5 min. and
then let sit for 24±2 hrs. at room condition. (*1)
««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
Within ±15%
>˜}i
D.F.
[KRM31]
W.V.: 25V
: 0.2 max.
W.V.: 50V/100V
: 0.05 max.
[KRM55]
0.05 max.
I.R.
[KRM31]
W.V.: 25V
: More than 25MΩ · μF
W.V.: 50V/100V
: More than 50MΩ · μF
[KRM55]
More than 10MΩ · μF
17 ˆvi
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
Apply voltage as in the Table for 1000+48/-0 hrs. at maximum
operating temperature ±3°C. Remove and let sit for 24±2 hrs.
at room condition, (*1) then measure.
,>Ìi`Ê6œÌ>}i
DC25V, DC50V
DC63V, DC100V
For General Purpose
KRM/KR3 Series
Ìi“
Product Information
ϡ
««ˆi`Ê6œÌ>}i
200% of the rated voltage (*2)
150% of the rated voltage
The charge/discharge current is than 50mA.
U*ÀiÌÀi>̓i˜Ì
Perform a heat treatment at 150+0/-10°C for 60±5 min. and
then let sit for 24±2 hrs. at room condition. (*1)
(*2) KRM31KC81E106, KRM31FR61E106, KRM31KR71H225,
KRM31KR71H475, KRM31KR72A105
: 150% of the rated voltage
In accordance with item No.4
(*1) "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
203
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Metal Terminal Monolithic Ceramic Capacitors
Anti- Deflecting Soldering
crack
crack
noise
Large Capacitance and High Allowable Ripple Current KR3 Series
For General Purpose
KRM/KR3 Series
c Features
T
Product Information
1. The product has high reliability against heat and
mechanical impact.
2. Stacking two capacitors reduces the mounting space and
achieves a large capacitance.
3. The unique terminal structure greatly reduces noise from
the ceramics on the board.
4. This series can provide higher capacitance value under
DC-Bias condition, compare with previous X7R char.
5. Improve the performance of ripple-resistance compared
with X7R char.
e
W
L
Part Number
KR355L
KR355Q
KR355T
KR355W
Dimensions (mm)
W
T
L
6.1±0.4
2.8±0.2
3.7±0.2
4.8±0.2
6.4±0.3
5.3±0.2
e
1.2±0.2
c Applications
1. DC smoothing & EMI filiter for LED Lighting.
2. For PFC circuit in the swiching power supplies,
AC adaptor.
3. DC-DC converter for general electronic equipment.
Do not use these products in any Automotive
Power train or Safety equipment incliding Battery
chargers for Electric Vehicles and Plug-in Hybrids.
Only Murata products clearly stipulated as
"for Automotive use" can be used for automobile
appliations such as Power train and Safety equipment.
Part Number
Rated Voltage
TC Code
(Standard)
Capacitance
Length L
(mm)
Width W
(mm)
Thickness T
max.
(mm)
Metal Terminal
Width e (mm)
KR355LD72E474KH01K
250Vdc
X7T (EIA)
0.47µF±10%
6.1
5.3
3
1.2±0.2mm
KR355QD72E105KH01K
250Vdc
X7T (EIA)
1.0µF±10%
6.1
5.3
3.9
1.2±0.2mm
KR355WD72E225MH01K
250Vdc
X7T (EIA)
2.2µF±20%
6.1
5.3
6.7
1.2±0.2mm
KR355LD72W224KH01K
450Vdc
X7T (EIA)
0.22µF±10%
6.1
5.3
3
1.2±0.2mm
KR355LD72W474KH01K
450Vdc
X7T (EIA)
0.47µF±10%
6.1
5.3
3
1.2±0.2mm
KR355QD72W564KH01K
450Vdc
X7T (EIA)
0.56µF±10%
6.1
5.3
3.9
1.2±0.2mm
KR355TD72W105MH01K
450Vdc
X7T (EIA)
1.0µF±20%
6.1
5.3
5
1.2±0.2mm
KR355WD72W125MH01K
450Vdc
X7T (EIA)
1.2µF±20%
6.1
5.3
6.7
1.2±0.2mm
KR355LD72J104KH01K
630Vdc
X7T (EIA)
0.1µF±10%
6.1
5.3
3
1.2±0.2mm
KR355LD72J154KH01K
630Vdc
X7T (EIA)
0.15µF±10%
6.1
5.3
3
1.2±0.2mm
KR355QD72J224KH01K
630Vdc
X7T (EIA)
0.22µF±10%
6.1
5.3
3.9
1.2±0.2mm
KR355QD72J274KH01K
630Vdc
X7T (EIA)
0.27µF±10%
6.1
5.3
3.9
1.2±0.2mm
KR355WD72J474MH01K
630Vdc
X7T (EIA)
0.47µF±20%
6.1
5.3
6.7
1.2±0.2mm
KR355WD72J564MH01K
630Vdc
X7T (EIA)
0.56µF±20%
6.1
5.3
6.7
1.2±0.2mm
204
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
KR3 Series Specifications and Test Methods
Item
Specifications
Test Method
1
Operating
Temperature Range
-55 to +125°C
Reference temperature: 25°C
2
Appearance
No defects or adnormalities
Visual inspection
3
Dimensions
Within the specified dimensions
Using calipers and micrometers
No failure should be observed when voltage in the table is
applied between the terminations for 1 to 5 sec., provided the
charge/discharge current is less than 50mA.
Dielectric Strength
No defects or abnormalities
5
Insulation Resistance
(I.R.)
More than 10,000MΩ or 100Ω · μF (Whichever is Smaller)
6
Capacitance
Within the specified tolerance
7
Dissipation
Factor (D.F.)
0.01 max.
Rated Voltage
DC250V
DC450V
DC630V
Test Voltage
200% of the rated voltage
150% of the rated voltage
120% of the rated voltage
Product Information
4
The inslation resisitance should be measured with
DC500V±50V (DC250V±25V in case of rated Voltage:
DC250V, DC450V) and within 60±5 sec. of charging.
The capacitance/D.F. should be measured at a frequency of
1±0.2kHz and a voltage of AC1±0.2V (r.m.s.).
The capacitance measurement should be made at each step
specified in the table.
8
Capacitance
Temperature
Characteristics
Cap. Change
Within +22/-33%
(Temp. Range: -55 to +125°C)
Step
1
2
3
4
5
Temperature (°C)
25±2
Min. Operating Temp. ±3
25±2
Max. Operating Temp. ±2
25±2
U*ÀiÌÀi>̓i˜Ì
Perform a heat treatment at 150+0/-10°C for 60±5 min. and
then let sit for 24±2 hrs. at room condition.*
A static load of 10N using a pressure rod should be applied to
the center in the direction of the arrow and held for 10 sec.
Pressure Rod
Pressure
9
Strength of Metal
Terminal
R 0.5
Termination not to be broken or loosened
0.5L
10
Adhesive Strength
of Termination
No removal of the terminations or other defect should occur.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1.
Then apply 10N force in the direction of the arrow.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free defects such as heat shock.
10N, 10T1s
Glass Epoxy Board
Fig. 1
Appearance No defects or abnormalities
Capacitance Within the specified tolerance
11
Vibration
Resistance
D.F.
For General Purpose
KRM/KR3 Series
No.
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz.
The frequency range, from 10 to 55Hz and return to 10Hz,
should be traversed in approximately 1 min. This motion should
be applied for a period of 2 hrs. in each of 3 mutually
perpendicular directions (total of 6 hrs.).
In accordance with item No.7
Solder
Cu
Glass Epoxy Board
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
205
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
KR3 Series Specifications and Test Methods
Continued from the preceding page.
ϡ
Ìi“
-«iVˆvˆV>̈œ˜Ã
/iÃÌÊiÌ œ`
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2.
Then apply a force in the direction shown in Fig. 3.
The soldering should be done using the reflow method and
should be conducted with care so that the soldering is uniform
and free of defects such as heat shock.
b
ø4.5
d
c
12
20 50
40
For General Purpose
KRM/KR3 Series
No marking defects
iviV̈œ˜
a
t : 1.6
100
Product Information
/Þ«i
KR355
ˆ“i˜Ãˆœ˜Ê­““®
L
c
8.0
5.6
>
4.5
R4
speed: 1.0mm/s
Pressurize
(in mm)
Flexure: V5
Capacitance meter
`
1.0
45
Fig. 2
45
(in mm)
Fig. 3
Reflow Soldering: Peak 260+0/-5°C
The area of soldering 230°C min., 20 to 40 sec.
Let sit for 24±2 hrs. at room condition*, then measure.
U*ÀiÌÀi>̓i˜Ì
Perform the heat treatment at 150+0/-10°C for 60±5 min. and
then let sit for 24±2 hrs. at room condition.*
13
-œ`iÀ>LˆˆÌÞʜvÊ
/iÀ“ˆ˜>̈œ˜
The metal surface is soldered well.
300°C
260+0/-5°C
20 to 40 s
230°C min.
200°C
180°C
150°C
60 to 120 s
100°C
««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
Within ±10%
>˜}i
,iÈÃÌ>˜ViÊ
14 ̜Ê-œ`iÀˆ˜}Ê D.F.
i>Ì
I.R.
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.7
In accordance with item No.5
In accordance with item No.4
««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
Within ±7.5%
>˜}i
15
D.F.
In accordance with item No.7
I.R.
In accordance with item No.5
/i“«iÀ>ÌÕÀiÊ
ÞVi
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
U˜ÊV>ÃiʜvÊ,ivœÜÊ-œ`iÀˆ˜}
See item 13 Solderability of Termination
U˜ÊV>ÃiʜvÊ-œ`iÀˆ˜}ÊÀœ˜
Temp. of solder: 350±10°C
Solder time: 4+1/-0 sec.
Let sit for 24±2 hrs.at room condition,* then measure.
Please refer to "Caution (Soldering and Mounting) Correction
with a Soldering Iron".
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4.
Perform the 100 cycles according to the 4 heat treatments listed
in the following table.
Let sit for 24±2 hrs. at room condition*, then measure.
-Ìi«
1
2
3
4
/i“«iÀ>ÌÕÀiÊ­c ®
Min. Operating Temp. ±3
Room Temp.
Min. Operating Temp. ±2
Room Temp.
/ˆ“iÊ­“ˆ˜°®
30±3
2 to 3
30±3
2 to 3
U*ÀiÌÀi>̓i˜Ì
Perform a heat treatment at 150+0/-10°C for 60±5 min. and
then let sit for 24±2 hrs. at room condition.*
In accordance with item No.4
Solder
Cu
Glass Epoxy Board
Fig. 4
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.
206
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
KR3 Series Specifications and Test Methods
Continued from the preceding page.
-«iVˆvˆV>̈œ˜Ã
/iÃÌÊiÌ œ`
««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
Within ±12.5%
>˜}i
Փˆ`ˆÌÞÊ
16 ­-Ìi>`ÞÊ D.F.
-Ì>Ìi®
I.R.
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
0.02 max.
More than 1,000MΩ or 10MΩ · μF (Whichever is smaller)
In accordance with item No.4
««i>À>˜Vi No marking defects
>«>VˆÌ>˜ViÊ
Within ±12.5%
>˜}i
17 ˆvi
D.F.
0.02 max.
I.R.
More than 1,000MΩ or 10MΩ · μF (Whichever is smaller)
ˆiiVÌÀˆVÊ
-ÌÀi˜}Ì
In accordance with item No.4
Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%
for 500+24/-0 hrs.
Remove and let sit for 24±2 hrs. at room condition*, then
measure.
U*ÀiÌÀi>̓i˜Ì
Perform a heat treatment at 150+0/-10°C for 60±5 min. and
then let sit for 24±2 hrs. at room condition.*
Apply voltage as in the Table for 1000+48/-0 hrs. at maximum
operating temperature ±3°C. Remove and let sit for 24±2 hrs.
at room condition,* then measure.
,>Ìi`Ê6œÌ>}i
DC250V
DC450V
DC630V
««ˆi`Ê6œÌ>}i
150% of the rated voltage
130% of the rated voltage
120% of the rated voltage
The charge/discharge current is than 50mA.
U*ÀiÌÀi>̓i˜Ì
Apply test voltage for 60±5min. at test temperature.
Remove and let sit for 24±2 hrs, at room condition.*
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
207
For General Purpose
KRM/KR3 Series
Ìi“
Product Information
ϡ
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Package
Taping is standard packaging method.
Dimensions (mm)
Part Number
Quantity (pcs.)
W
T
ø330mm Reel
Kpp31K
3.5
1.7
2.7
4,000
Kpp31F
3.5
1.7
1.9
5,000
Kpp55L
6.1
5.3
2.8
2,000
Kpp55Q
6.1
5.3
3.7
1,000
Kpp55T
6.1
5.3
4.8
1,000
Kpp55W
6.1
5.3
6.4
500
ø180mm reel is also available.
c Tape Carrier Packaging
(1) Appearance of Taping
Embossed Tape
(2) Dimensions of Tape
Embossed Tape
12mm width 4mm pitch Tape
Cover Tape: 0.06mm in thickness
2.0±0.05
4.0±0.1
4.0±0.1
+0.1
ø1.5 –0
0.3±0.1
1.75±0.1
5.5±0.05
Cavity for Chip: As specified in (2)
B
A
12.0±0.3
Sprocket Hole: As specified in (2)
Base Tape: As specified in (2)
Direction of Feed
Part Number
Packed Capacitors
Capacitor
C max.
A*
B*
C
Kpp31K
2.2
4.1
4.1
Kpp31F
2.2
4.1
2.8
*Nominal Value
12mm width 8mm pitch Tape
+0.1
0.4±0.1
1.75±0.1
12.0±0.1
Direction of Feed
A
B
A
Part Number
0.4±0.1
1.75±0.1
4.0±0.1
12.0±0.3
4.0±0.1
Kpp55L
ø1.5 –0
2.0±0.1
Direction of Feed
C max.
A*
B*
C
5.5
6.4
4.1
Kpp55Q
5.5
6.4
5.8
Kpp55T
5.5
6.4
5.8
Part Number
Kpp55W
16.0±0.3
2.0±0.05
7.5±0.1
8.0±0.1
16mm width 12mm pitch Tape
+0.1
ø1.5 –0
5.5±0.05
Product Information
Package
L
B
For General Purpose
KRM/KR3 Series
c Minimum Quantity Guide
C max.
A*
B*
C
5.7
6.7
7.4
*Nominal Value
*Nominal Value
(in mm)
Continued on the following page.
208
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Package
Continued from the preceding page.
(3) Dimensions of Reel
ø21±0.8
For General Purpose
KRM/KR3 Series
Product Information
Package
ø13±0.2
330±2.0
2.0±0.5
+1 (Tape width 12mm)
100 -0
80±1.0 (Tape width 16mm)
17.5±1.5 (Tape width 12mm)
21.5±1.0 (Tape width 16mm)
13.5±1.0 (Tape width 12mm)
17.5±1.0 (Tape width 16mm)
(in mm)
(4) Taping Method
q Tapes for capacitors are wound clockwise. The
sprocket holes are to the right as the tape is pulled
toward the user.
w Part of the leader and part of the empty tape should be
attached to the end of the tape as shown at right.
e The top tape or cover tape and base tape are not
attached at the end of the tape for a minimum of 5
pitches.
r Missing capacitors number within 0.1% of the number
per reel or 1 pc, whichever is greater, and are not
continuous.
t The top tape or cover tape and bottom tape should not
protrude beyond the edges of the tape and should not
cover sprocket holes.
y Cumulative tolerance of sprocket holes, 10 pitches:
±0.3mm.
u Peeling off force: 0.1 to 0.6N in the direction shown at
right.
Capacitors
mounting unit
Vacant section
160 min.
Vacant section
190 min.
210 min.
(Top Tape or Cover Tape alone)
Direction of Feed
(in mm)
165 to
180°
Top Tape or Cover Tape
Base Tape
209
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution/Notice
!Caution
For General Purpose
KRM/KR3 Series
c Storage and Operation Conditions ........................ 211
Notice
c Rating .................................................................... 214
1. Capacitance Change of Capacitor..................... 214
c Rating .................................................................... 211
2. Performance Check by Equipment .................... 214
1. Operating Voltage.............................................. 211
Product Information
!Caution/Notice
2. Operating Temperature
and Self-generated Heat ................................... 211
3. Fail-safe ............................................................. 211
c Soldering and Mounting ........................................ 212
1. Vibration and Impact.......................................... 212
2. Land Layout for Cropping PC Board ................. 212
3. Reflow Soldering ............................................... 212
4. Flow Soldering ................................................... 213
5. Correction with a Soldering Iron ........................ 213
210
c Soldering and Mounting ........................................ 214
1. Construction of Board Pattern ........................... 214
2. Mounting of Chips.............................................. 214
3. Soldering ........................................................... 214
4. Cleaning ............................................................ 214
5. Resin Coating .................................................... 214
C02E.pdf
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
c Storage and Operation Conditions
For General Purpose
KRM/KR3 Series
performance of a cleaned, bonded or molded product
in the intended equipment. Store the capacitors
where the temperature and relative humidity do not
exceed 5 to 40 degrees centigrade and 20 to 70%.
Use capacitors within 6 months of delivery.
Check the solderability after 6 months or more.
c Rating
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p which contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes these
irregular voltages.
Voltage
Positional
Measurement
DC Voltage
V0-p
DC+AC Voltage
V0-p
When DC-rated capacitors are to be used in input circuits
from a commercial power source (AC filter), be sure to
use Safety Certified Capacitors because various
regulations for withstanding voltage or impulses,
established for all equipment, should be taken into
consideration.
AC Voltage
Vp-p
Pulse Voltage (1)
Vp-p
Pulse Voltage (2)
Vp-p
2. Operating Temperature and Self-generated Heat
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range.
Be sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a highfrequency voltage, pulse voltage, it may self-generate
heat due to dielectric loss.
Applied voltage should be the load such as selfgenerated heat is within 20°C on the condition of
atmosphere temperature 25°C. When measuring, use a
thermocouple of small thermal capacity -K of ø0.1mm
in conditions where the capacitor is not affected by
radiant heat from other components or surrounding
ambient fluctuations. Excessive heat may lead to
deterioration of the capacitor's characteristics and
reliability. (Never attempt to perform measurement
with the cooling fan running. Otherwise, accurate
measurement cannot be ensured.)
3. Fail-safe
Failure of a capacitor may result in a short circuit. Be sure
to provide an appropriate fail-safe function such as a fuse
on your product to help eliminate possible electric shock,
fire, or fumes.
Continued on the following page.
211
Product Information
!Caution
Do not use or store capacitors in a corrosive
atmosphere, especially where chloride gas, sulfide
gas, acid, alkali, salt or the like are present. In
addition, avoid exposure to moisture. Before cleaning,
bonding or molding this product, verify that these
processes do not affect product quality by testing the
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
Continued from the preceding page.
Soldering and Mounting
1. Vibration and Impact
For General Purpose
KRM/KR3 Series
Do not expose a capacitor to excessive shock or vibration
during use.
Do not directly touch the capacitor, especially the ceramic
body. Residue from hands/fingers may create a short
circuit environment.
Product Information
!Caution
2. Land Layout for Cropping PC Board
Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board.
[Component Direction]
[Chip Mounting Close to Board Separation Point]
Locate chip
horizontal to the
direction in which
stress acts.
<Example
to be avoided>
C
Perforation
B
Chip arrangement
Worst AGCGB~D Best
D
A
Slit
<Example
of improvement>
3. Reflow Soldering
When components are exposed to sudden heat, their
mechanical strength can be decreased due to the
extreme temperature changes which can cause flexing
and result in internal mechanical damage, which will
cause the parts to fail. In order to prevent mechanical
damage, preheating is required for both the components
and the PCB board. Preheating conditions are shown in
Table 1. It is required to keep the temperature differential
between the soldering and the components surface (ΔT)
as small as possible.
When components are immersed in solvent after
mounting, be sure to maintain the temperature difference
(ΔT) between the component and solvent within the
range shown in the Table 1.
[Standard Conditions for Reflow Soldering]
Infrared Reflow
Temperature (D)
Soldering
Peak Temperature
Gradual
Cooling
200°C
ΔT
170°C
150°C
130°C
Preheating
Time
60-120 seconds 30-60 seconds
Vapor Reflow
Table 1
Temperature (D)
Part Number
Temperature Differential
K--31
ΔTV190D
K--55
ΔTV130D
Soldering
Peak Temperature
Gradual
Cooling
ΔT
170°C
150°C
130°C
Recommended Conditions
Preheating
Pb-Sn Solder
Infrared Reflow Vapor Reflow
Lead Free Solder
Peak Temperature
230-250°C
230-240°C
240-260°C
Atmosphere
Air
Air
Air or N2
60-120 seconds
Time
20 seconds max.
Pb-Sn Solder: Sn-37Pb
Lead Free Solder: Sn-3.0Ag-0.5Cu
Continued on the following page.
212
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
!Caution
Continued from the preceding page.
For General Purpose
KRM/KR3 Series
[Optimum Solder Amount for Reflow Soldering]
in section
Inverting the PCB
Make sure not to impose an abnormal mechanical shock on
the PCB.
4. Flow Soldering
Do not apply flow soldering.
5. Correction with a Soldering Iron
17
(in mm)
Soldering Iron
Temperature of iron chip: 350°C max./5s max./60W max.
Electrode Land
Thread Solder
Optimum Solder Amount when re-working Using a Solder
Iron.
The top of the solder fillet should be lower than the level
of the bottom of the chip.
26
R0.5
ø6.5
Please refer to the figure of a soldering iron on the right.
Please use thread solder which is smaller than 0.5mm in
diameter.
A soldering iron must be touched the bottom of metal
terminal.
*1) Do not touch ceramic, or it causes cracks because of
sudden heat.
*2) Do not touch the connection between a chip and a
metal and the outside of that area, or it causes the
chip to move and come off.
Please only touch the metal terminal.
Do not touch the chip.
[Optimum Solder Amount when Re-working Using
a Solder Iron]
in section
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT AND
CAUSE FUMING OR PARTIAL DISPERSION WHEN THE
PRODUCT IS USED.
213
Product Information
!Caution
Optimum Solder Amount for Reflow Soldering
If solder paste is excessive, solder between a chip and a
metal terminal melts. This causes the chip to move and
come off.
If solder paste is too little, it causes a lack of adhesive
strength on the metal terminal and the capacitor comes
off.
Please make sure that solder is smoothly applied higher
than 0.3mm and lower than the level of the bottom of the
chip.
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Notice
c Rating
For General Purpose
KRM/KR3 Series
Product Information
Notice
1. Capacitance Change of Capacitor
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its capacitance
slightly if the capacitor is left on for a long time.
Moreover, capacitance might change greatly depending
on the surrounding temperature or an applied voltage.
Therefore, it is not likely to be suitable for use in a time
constant circuit.
Please contact us if you need detailed information.
2. Performance Check by Equipment
Before using a capacitor, check that there is no problem
in the equipment's performance and the specifications.
Generally speaking, CLASS 2 ceramic capacitors have
voltage dependence characteristics and temperature
dependence characteristics in capacitance.
Therefore, the capacitance value may change depending
on the operating condition in the equipment.
Accordingly, be sure to confirm the apparatus
performance of receiving influence in a capacitance
value change of a capacitor, such as leakage current
and noise suppression characteristics.
Moreover, check the surge-proof ability of a capacitor in
the equipment, if needed, because the surge voltage may
exceed the specific value by the inductance of the circuit.
c Soldering and Mounting
1. Construction of Board Pattern
If solder is excessively applied to the circuit board,
mechanical stress will cause destruction resistance
characteristics to lower. To prevent this, be extremely
careful in determining shape and dimension before
designing the circuit board diagram.
Construction and Dimensions of Pattern (Example)
Chip Capacitor
Solder Resist
c
b
Part Number
Land
a
a
b
c
Kpp31
1.6
1.8
1.9
Kpp55
2.6
2.7
5.6
(in mm)
2. Mounting of Chips
Mechanical shock of the chip placer
When the positioning claws and pick-up nozzle are worn,
the load is applied to the chip while positioning is
concentrated in one position, thus causing cracks,
breakage, faulty positioning accuracy, etc.
Careful checking and maintenance are necessary to
prevent unexpected trouble.
An excessively low bottom dead point of the suction
nozzle imposes great force on the chip during mounting,
causing cracked chips and the metal to bend. Please set
the suction nozzle's bottom dead point on the upper
surface of the board.
3. Soldering
Flux Application
Do not use strong acidic flux.
Do not use water-soluble flux.*
(*Water-soluble flux can be defined as non rosin type flux
including wash-type flux and non-wash-type flux.)
4. Cleaning
Please confirm there is no problem in the reliability of the
product beforehand when cleaning it with the intended
equipment.
The residue after cleaning it might cause a decrease in
the surface resistance of the chip and the corrosion of the
electrode part, etc. As a result it might cause reliability to
deteriorate. Please confirm beforehand that there is no
problem with the intended equipment in ultrasonic
cleansing.
5. Resin Coating
Please use it after confirming there is no influence on the
product with the intended equipment before the resin
coating and molding.
A cracked chip might be caused at the cooling/heating
cycle by the amount of resin spreading and/or bias
thickness.
The resin for coating and molding must be selected as
the stress is small when stiffening and the hygroscopic is
low as possible.
214
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C02E.pdf
Oct.1,2012
ISO 9001 Certifications
c Qualified Standards
The products listed here have been produced by ISO 9001
certified factory.
Plant
Fukui Murata Mfg. Co., Ltd.
Izumo Murata Mfg. Co., Ltd.
Okayama Murata Mfg. Co., Ltd.
Murata Electronics Singapore (Pte.) Ltd.
Beijing Murata Electronics Co., Ltd.
Wuxi Murata Electronics Co., Ltd.
215
!Note • Please readd rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog
og has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
216
C02E.pdf
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Please check Murata’s newsletter!
You can learn about electric parts with fun.
http://www.murata.com/products/emicon_fun/
EMICON-FUN! disseminated widely from basics (principles, characteristics, mounting, etc.) of capacitors, inductors and EMI suppression filters
to information can practically be used.
Updated information is also distributed via the mail magazine.
You can register from the Products page on Murata Manufacturing website.
http://www.murata.com/products/
This banner is
the entrance of
register form
217
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Capacitor Website Introduction
The website and search engine of ceramic capacitors has been drastically renewed.
capacitor murata
http://www.murata.com/products/capacitor/
C02E.pdf
Oct.1,2012
C02E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Oct.1,2012
Convenient Search The type of searches has been increased to respond to various ways of searching.
The products you are searching for can easily be found from about 40,000 part numbers!
The frequency of revisions and discontinuance has been increased to provide the latest information at all times!
Substantial
Technical
Information
Reference drawings (Specifications and Test Methods) can be downloaded in PDF format.
Graphs of the electrical characteristic data (Capacitance - Temperature characteristics / DC bias characteristics /
AC voltage characteristics / Frequency characteristics) can be displayed.
s Reliability test data can be downloaded.
s
s
1 Examples of Problem Solving
2 Industry Pickup
Contents for Solving customers' problems.
s Examples of Replacement (Video)
s Proposal for Cost Reductions
s Examples of Noise
Countermeasures (Video)
3 Advantages of Murata Capacitors
Introducing the recommended
series and the latest information
on Murata for each industry.
s Automobile
s Smart Phones
We explain the unique benefits of
Murata capacitors, our matchless
quality, track record in the market,
supply systems and development
capability.
You can contact us and download catalogs from here.
1
1
1
2
3
2
4
5
4
Search by features
Products can be searched by problems,
shapes or mounting methods.
Cross reference search
Equivalent products of Murata can be
searched by competitors' part numbers.
2
5
Search in the lineups
Products can be searched
by entire product lineup.
3
Search by specifications
Products can be searched by capacitance,
rated voltage or temperature characteristics.
Search by part number
Products can be searched
by Murata's part numbers.
SimSurfing
This is a web application to display characteristics charts of
Murata products, and download the characteristics data.
S parameter
Netlist (SPICE Model)
s Data Libraries
s
s
(for Agilent ADS, for AWR Microwave Officer)
Frequently Asked Questions (FAQ)
3
This is a collection of questions asked by customers.
The contents of problems can easily be searched by keywords with
this search function.
Characteristics Data
(Dimensions / Capacitance - Temperature Characteristics /
DC Bias Characteristics / AC Voltage / Frequency Characteristics /
Heat Generation by Ripple Currents, etc.)
Reliability Test Data
Initial Characteristics / Board Bending Resistance /
Humidity Resistance / High Temperature Load / Solderability, etc.
Safety Certificates by Series
List of ISO14001 Certified Plants
218
219
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Cat. No. C02E-17
C02E.pdf
Oct.1,2012
Similar pages