Surface Mount TSSOP Resistor Networks TSSOP Series • • • • • Absolute tolerances to ±0.1% Tight TC Tracking to ±5ppm/°C Ratio match tolerances to ±0.05% Ultra-stable tantalum nitride resistors Standard Sn/Pb and Pb-free terminations available IRC’s TaNSil® TSSOP resistor networks are ideally suited for high volume applications that demand a small, low-profile footprint. The small wire-bondable chip package provides higher component density, lower resistor cost and high reliability. The tantalum nitride film system on silicon provides precision tolerance, exceptional TCR tracking, low cost and miniature package. Excellent performance in harsh, humid environments is a trademark of IRC’s self-passivating TaNSil® resistor film. For applications requiring high performance resistor networks in a low cost, low profile, surface mount package, specify IRC TSSOP resistor networks. Electrical Data Environmental Data Resistance Range 10Ω to 250KΩ Absolute Tolerance To ±0.1% Ratio Tolerance to R1 To ±0.05% Absolute TCR To ±25ppm/°C Tracking TCR To ±5ppm/°C Typical Delta R Max Delta R Thermal Shock ±0.02% ±0.1% Power Conditioning ±0.03% ±0.1% High Temperature Exposure ±0.03% ±0.5% Short-time Overload ±0.02% ±0.5% Low Temperature Storage ±0.03% ±0.5% Life ±0.05% ±0.1% Test Per MIL-PRF-83401 Element Power Rating @ 70°C Isolated Schematic 100mW Bussed Schematic 50mW Package Power Rating @ 70°C Rated Operating______ Voltage (not to exceed √ P x R) Operating Temperature Noise 16-Pin 20-Pin 24-Pin 800mW 1.0W 1.0W 100 Volts -55°C to +125°C <-30dB General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com A subsidiary of TT electronics plc TSSOP Series Issue January 2009 Sheet 1 of 4 Surface Mount TSSOP Resistor Networks Manufacturing Capabilities ISOLATED SCHEMATIC A Absolute TCR (±ppm/°C) BUSSED SCHEMATIC B Ohmic Range (Ω) Available Tolerances Available Ratio Tolerances Best Tracking (±ppm/°C) Ohmic Range (W) Available Tolerances Available Ratio Tolerances Best Tracking (±ppm/°C) 10 - 25 FGJ FG 100 10 - 25 FGJ FG 200 26 - 50 DFGJ CDFG 50 26 - 50 FGJ DFG 100 51 - 200 CDFGJ CDFG 10 51 - 100 DFGJ CDFG 50 201 - 250K BCDFGJ ABCDFG 5 101 - 200 DFGJ BCDFG 25 201 - 500 BCDFGJ BCDFG 20 250 501 - 100K 100 BCDFGJ ABCDFG 5 26 - 50 DFGJ CDFG 50 26 - 50 FGJ DFG 100 51 - 200 CDFGJ CDFG 10 51 - 100 DFGJ CDFG 50 201 - 250K BCDFGJ ABFG 5 101 - 200 DFGJ BCDFG 25 201 - 500 BCDFGJ BCDFG 20 501 - 100K BCDFGJ ABCDFG 5 26 - 50 DFGJ CDFG 50 51 - 100 DFGJ CDFG 50 51 - 200 CDFGJ CDFG 10 101 - 200 DFGJ BCDFG 25 201 - 250K BCDFGJ ABFG 5 201 - 500 BCDFGJ BCDFG 20 50 501 - 100K 51 - 200 CDFGJ CDFG 10 201 - 500 201 - 250K BCDFGJ ABFG 5 501 - 100K BCDFGJ ABCDFG 5 BCDFGJ 20 BCDFG 25 © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com BCDFGJ ABCDFG 5 TSSOP Series Issue January 2009 Sheet 2 of 4 Surface Mount TSSOP Resistor Networks Physical Data 4.4mm ±0.1 6.4 BSC # OF PINS DIMENSION "D" 16 5.0mm±0.1 20 6.5mm±0.1 24 7.8mm±0.1 Note: N = number of pins (16, 20, 24) 0.65mm BSC 0.90mm±0.05 R=0.09mm min 1.10 max 0.1mm SEATING PLANE 0.10mm±0.05 0° - 8° 0.60mm±0.15 1.0mm REF Note: All dimesions exclude mold flash and end flash which shall not exceed 0.006" per side. Drawing proportions not to scale. Schematic Data Note: Lead Coplanarity 0.004" max. Power Derating Curve N R1 2 3 Schematic A Isolated N R1 % Of Rated Power 100 1 50 10 1 2 3 Schematic B Bussed 25° 70° 125° Temperature in °C Note: N = number of pins (16, 20, 24) © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com TSSOP Series Issue January 2009 Sheet 3 of 4 Surface Mount TSSOP Resistor Networks Ordering Data Prefix GUS - TS8A - 01 - 1002 - F B Style, Schematic and Termination TS8A = 16-pin, 8 Isolated Resistors with standard Sn/Pb terminations TS8ALF = 16-pin, 8 Isolated Resistors with 100% matte tin, Pb-free terminations TS8B = 16-pin, 15 Bussed Resistors with standard Sn/Pb terminations TS8BLF = 16-pin, 15 Bussed Resistors with 100% matte tin, Pb-free terminations TS0A = 20-pin, 10 Isolated Resistors with standard Sn/Pb terminations TS0ALF = 20-pin, 10 Isolated Resistors with 100% matte tin, Pb-free terminations TS0B = 20-pin, 19 Bussed Resistors with standard Sn/Pb terminations TS0BLF = 20-pin, 19 Bussed Resistors with 100% matte tin, Pb-free terminations TSCA = 24-pin, 12 Isolated Resistors with standard Sn/Pb terminations TSCALF = 24-pin, 12 Isolated Resistors with 100% matte tin, Pb-free terminations TSCB = 24-pin, 23 Bussed Resistors with standard Sn/Pb terminations TSCBLF = 24-pin, 23 Bussed Resistors with 100% matte tin, Pb-free terminations Absolute TCR Code 00 = ±250 ppm/°C; 01 = ±100 ppm/°C; 02 = ±50 ppm/°C; 03 = ±25 ppm/°C Resistance Code 4-Digit Resistance Code Ex: 1002 = 10KΩ, 50R1 = 50.1Ω Absolute Tolerance Code J = ±5%; G = ±2%; F = ±1%; D = ±0.5%; C = ±0.25%; B = ±0.1% Ratio Tolerance Code (optional) G = ±2%; F = ±1%; D = ±0.5%; C = ±0.25%; B = ±0.1%; A = ±0.05% Packaging Specify tubes or tape & reel. For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com TSSOP Series Issue January 2009 Sheet 4 of 4