5 Volt-Surface Mount Monolithic Amplifier DC-7 GHz Product Features • Gain, 15 dB typ. at 100 MHz • High Pout, P1dB 20 dBm typ. • High IP3, 40 dBm typ. at 100 MHz • Ruggedized design • Fixed 5V operation • Unconditionally stable • Excellent ESD Protection • Transient protected, US patent 6,943,629 GVA-82+ CASE STYLE: DF782 PRICE: $1.82 ea. QTY. (25) + RoHS compliant in accordance with EU Directive (2002/95/EC) Typical Applications The +Suffix has been added in order to identify RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications. • Base station infrastructure • Portable Wireless • CATV & DBS • MMDS & Wireless LAN • LTE General Description GVA-82+ (RoHS compliant) is a wideband amplifier offering high dynamic range. Lead finish is SnAgNi. It has repeatable performance from lot to lot and is enclosed in a SOT-89 package. It uses patented Transient Protected Darlington configuration and is fabricated using InGaP HBT technology. simplified schematic and pin description RF-OUT and DC-IN 3 R F -OUT & DC-IN RF IN 4 2 G R OUND 1 R F -IN GROUND Function Pin Number Description RF IN 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN 3 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in “Recommended Application Circuit”, Fig. 2 GND 2,4 Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design” to reduce ground path inductance for best performance. Mini-Circuits ® minicircuits.com ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 For detailed performance specs & shopping online see Mini-Circuits web site TM The Design Engineers Search Engine Provides ACTUAL Data Instantly From MINI-CIRCUITS At: www.minicircuits.com IF/RF MICROWAVE COMPONENTS REV. OR M122194 GVA-82+ ED-12353A/2 090325 Page 1 of 5 GVA-82+ Monolithic InGaP HBT MMIC Amplifier Electrical Specifications(1) at 25°C and 5V, unless noted Parameter Condition (GHz) Min. 0.1 1.0 2.0 3.0 4.0 6.0 7.0 0.1 1.0 2.0 3.0 4.0 6.0 13.7 Frequency Range(2) Gain Magnitude of Gain Variation versus Temperature(3) (values are negative) Input Return Loss Output Return Loss Output Power @1 dB compression Output IP3 Noise Figure Group Delay Max. Units 7 GHz 15.3 14.9 13.8 12.5 11.7 10.6 9.9 0.0002 0.0012 0.0020 0.0027 0.0037 0.0062 16.8 dB DC 12.2 9.8 7.0 0.0108 0.1 1.0 2.0 3.0 4.0 6.0 7.0 0.1 1.0 2.0 3.0 4.0 6.0 35.0 24.0 18.5 15.9 15.8 19.7 14.4 17.7 15.7 12.3 10.8 10.0 10.9 14.0 9.0 7.0 Reverse Isolation Typ. 2.0 0.1 1.0 2.0 3.0 4.0 6.0 15.2 13.0 dB/°C 0.005 dB dB 10.5 18.0 18.0 18.0 23.6 20.1 20.1 20.6 20.6 20.2 18.2 7.0 18.2 0.1 1.0 2.0 3.0 4.0 6.0 40.3 38.0 36.0 34.3 32.7 31.0 34.0 7.0 30.9 0.1 1.0 2.0 3.0 4.0 6.0 6.5 6.6 6.6 6.8 6.9 7.5 7.0 8.2 2.0 100 dB dBm dBm 8.0 dB 8.2 psec Device Operating Voltage 4.8 5.0 5.2 V Device Operating Current 90 106 120 mA Device Current Variation vs. Temperature 70.5 µA/°C Device Current Variation vs Voltage 0.038 mA/mV 68 °C/W Thermal Resistance, junction-to-ground lead (1) Measured on Mini-Circuits test board TB-313. See Characterization Test Circuit (Fig. 1) (2) Guaranteed specification DC*-7 GHz. *Low frequency cut off determined by external coupling capacitors and RF Choke (RFC). (3) (Gain at 85°C, Gain at -45°C)/130 Mini-Circuits ® minicircuits.com ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 For detailed performance specs & shopping online see Mini-Circuits web site TM The Design Engineers Search Engine Provides ACTUAL Data Instantly From MINI-CIRCUITS At: www.minicircuits.com IF/RF MICROWAVE COMPONENTS Page 2 of 5 GVA-82+ Monolithic InGaP HBT MMIC Amplifier Absolute Maximum Ratings Parameter Ratings Operating Temperature (ground lead) -40°C to 85°C Storage Temperature -65°C to 150°C Operating Current at 5V 160mA Power Dissipation 0.84W Input Power 20 dBm DC Voltage on Pin 3 5.8V Note: Permanent damage may occur if any of these limits are exceeded. Electrical maximum ratings are not intended for continuous normal operation. Characterization Test Circuit Vcc (Supply voltage) +5V 3 1 RF-IN BLK-18+ 2,4 DUT TB-313 RF-OUT Bias-Tee ZX85-12G-S+ Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Test Board TB-313) Gain, Output power at 1dB compression (P1 dB) and output IP3 (OIP3) are measured using R&S Network Analyzer ZVA-24. Noise Figure measured using Agilent’s N5242A PNA-X microwave network analyzer. Conditions: 1. Gain and Return loss: Pin= -25dBm 2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 0 dBm/tone at output. Mini-Circuits ® minicircuits.com ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 For detailed performance specs & shopping online see Mini-Circuits web site TM The Design Engineers Search Engine Provides ACTUAL Data Instantly From MINI-CIRCUITS At: www.minicircuits.com IF/RF MICROWAVE COMPONENTS Page 3 of 5 GVA-82+ Monolithic InGaP HBT MMIC Amplifier Product Marking V82 Additional Detailed Technical Information Additional information is available on our web site. To access this information enter the model number on our web site home page. Performance data, graphs, s-parameter (S2P FILES) data set (.zip file) Case Style: DF782 (SOT 89) Plastic package, exposed paddle, lead finish: tin/silver/nickel Tape & Reel: F55 Suggested Layout for PCB Design: PL-255 Evaluation Board: TB-410-82+ Environmental Ratings: ENV08T1 Recommended Application Circuit V cc C bypas s C block IN 4 Ibias R FC 3 Vd 1 2 OUT C block Fig 2. Test Board includes case, connectors, and components soldered to PCB Mini-Circuits ® minicircuits.com ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 For detailed performance specs & shopping online see Mini-Circuits web site TM The Design Engineers Search Engine Provides ACTUAL Data Instantly From MINI-CIRCUITS At: www.minicircuits.com IF/RF MICROWAVE COMPONENTS Page 4 of 5 GVA-82+ Monolithic InGaP HBT MMIC Amplifier ESD Rating Human Body Model (HBM): Class 1C (1000v to < 2000v) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M2 (100V to < 200V) in accordance with ANSI/ESD STM 5.2 - 1999 MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDECJ-STD-020D MSL Test Flow Chart Start Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Mini-Circuits ® minicircuits.com ISO 9001 ISO 14001 AS 9100 CERTIFIED P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661 For detailed performance specs & shopping online see Mini-Circuits web site TM The Design Engineers Search Engine Provides ACTUAL Data Instantly From MINI-CIRCUITS At: www.minicircuits.com IF/RF MICROWAVE COMPONENTS Page 5 of 5