H11AA1, H11AA3, H11AA2, H11AA4 AC Input/Phototransistor Optocouplers Features Description ■ ■ ■ ■ The H11AAX series consists of two gallium-arsenide infrared emitting diodes connected in inverse parallel driving a single silicon phototransistor output. Bi-polar emitter input Built-in reverse polarity input protection Underwriters Laboratory (UL) recognized – File #E90700 VDE approved – File #E94766 (ordering option ‘300’) Applications ■ AC line monitor ■ Unknown polarity DC sensor ■ Telephone line interface 6 6 1 6 BASE 2 5 COLL 3 4 EMITTER 1 1 6 1 Parameter Symbol Device Value Units Storage Temperature TSTG All -55 to +150 °C Operating Temperature TOPR All -55 to +100 °C Lead Solder Temperature TSOL All 260 for 10 sec °C PD All 350 mW 4.6 mW/°C mA TOTAL DEVICE Total Device Power Dissipation Derate Linearly From 25°C EMITTER Continuous Forward Current Forward Current - Peak (1 µs pulse, 300 pps) LED Power Dissipation IF All 100 IF(pk) All ±1.0 A PD All 200 mW 2.6 mW/°C Derate Linearly From 25°C DETECTOR Detector Power Dissipation PD Derate above 25°C ©2005 Fairchild Semiconductor Corporation H11AA1, H11AA3, H11AA2, H11AA4 Rev. 1.0.0 1 All 300 mW 4.0 mW/°C www.fairchildsemi.com H11AA1, H11AA3, H11AA2, H11AA4 AC Input/Phototransistor Optocouplers October 2005 Individual Component Characteristics Parameter Test Conditions Symbol Device Min Typ Max 1.5 Unit EMITTER Input Forward Voltage IF = ±10 mA VF All 1.2 VF = 0 V, f = 1.0 MHz CJ All 80 Breakdown Voltage Collector to Emitter IC = 1.0 mA, IF = 0 BVCEO All 30 V Collector to Base IC = 100 µA, IF = 0 BVCBO All 70 V Capacitance V pF DETECTOR Emitter to Base IE = 100 µA, IF = 0 BVEBO All 5 V Emitter to Collector IE = 100 µA, IF = 0 BVECO All 7 V Leakage Current Collector to Emitter VCE = 10 V, IF = 0 ICEO H11AA1,3,4 50 H11AA2 200 Capacitance Collector to Emitter VCE = 0, f = 1 MHz CCE All 10 pF Collector to Base VCE = 0, f = 1 MHz CCB All 80 pF Emitter to Base VCE = 0, f = 1 MHz CEB All 15 pF nA Transfer Characteristics (TA = 25°C Unless otherwise specified.) Characteristics Test Conditions Current Transfer Ratio, Collector to Emitter Current Transfer Ratio, Symmetry Symbol Device IF = ±10 mA, VCE = 10 V CTRCE IF = ±10 mA, VCE = 10 V (Figure.8) Saturation Voltage Collector to Emitter Min H11AA4 100 H11AA3 50 H11AA1 20 H11AA2 10 All .33 IF = ±10 mA, ICE = 0.5 mA VCE(SAT) All Min Typ Max Units % 3.0 .40 V Isolation Characteristics Characteristic Test Conditions Symbol Package Capacitance input/output VI-O = 0, f = 1 MHz CI-O Isolation Voltage f = 60 Hz, t = 1 min. VISO 5300 VAC(RMS) VI-O = 500 VDC RISO 1011 Ω Isolation Resistance 2 H11AA1, H11AA3, H11AA2, H11AA4 Rev. 1.0.0 Typ 0.7 Max Units pF www.fairchildsemi.com H11AA1, H11AA3, H11AA2, H11AA4 AC Input/Phototransistor Optocouplers Electrical Characteristics (TA = 25°C Unless otherwise specified.) Fig. 2 Normalized CTR vs. Forward Current 1.4 VCE = 5.0V TA = 25°C 80 Normalized to IF = 10 mA 1.2 1.0 40 NORMALIZED CTR I F - INPUT CURRENT (mA) 60 20 0 -20 -40 0.8 0.6 0.4 -60 0.2 -80 -100 -2.0 0.0 -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 2.0 0 5 NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) NORMALIZED CTR 20 1.0 1.4 IF = 5 mA 1.2 IF = 10 mA 1.0 0.8 0.6 Normalized to IF = 10 mA TA = 25°C 0.4 -75 IF = 20 mA 0.9 0.8 VCE= 5.0 V IF = 20 mA 0.7 0.6 IF = 10 mA 0.5 0.4 IF = 5 mA 0.3 0.2 0.1 0.0 -50 -25 0 25 50 75 100 10 125 100 Fig. 6 Collector-Emitter Saturation Voltage vs Collector Current 0.9 VCE= 0.3 V 0.8 IF = 20 mA 0.7 IF = 10 mA 0.5 0.4 0.3 IF = 5 mA 0.2 0.1 10 100 RBE- BASE RESISTANCE (k) 1000 VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) Fig. 5 CTR vs. RBE (Saturated) 1.0 0.6 3 H11AA1, H11AA3, H11AA2, H11AA4 Rev. 1.0.0 1000 RBE- BASE RESISTANCE (k) TA - AMBIENT TEMPERATURE (°C) NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) 15 Fig. 4 CTR vs. RBE (Unsaturated) Fig. 3 Normalized CTR vs. Ambient Temperature 1.6 0.0 10 IF - FORWARD CURRENT (mA) VF - INPUT VOLTAGE (V) 100 10 1 IF = 2.5 mA 0.1 IF = 10 mA 0.01 IF = 20 mA IF = 5 mA TA = 25˚C 0.001 0.01 0.1 1 10 IC - COLLECTOR CURRENT (mA) www.fairchildsemi.com H11AA1, H11AA3, H11AA2, H11AA4 AC Input/Phototransistor Optocouplers Fig. 1 Input Voltage vs. Input Current 100 Fig. 8 Normalized ton vs. RBE 5.0 100 Toff 10 Tf Ton 1 Tr VCC = 10 V IC = 2 mA RL = 100 4.5 NORMALIZED ton - (ton(RBE) / ton(open)) SWITCHING SPEED - (µs) IF = 10 mA VCC = 10 V TA = 25˚C 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.1 0.1 1 10 100 10 100 R-LOAD RESISTOR (k 100000 10000 ICEO - COLLECTOR -EMITTER DARK CURRENT (nA) 1.3 NORMALIZED toff - (toff(RBE) / toff(open)) 10000 Fig. 10 Dark Current vs. Ambient Temperature Fig. 9 Normalized toff vs. RBE 1.4 1.2 1.1 1.0 0.9 0.8 0.7 0.6 VCC = 10 V IC = 2 mA RL = 100 0.5 0.4 0.3 0.2 0.1 1000 RBE- BASE RESISTANCE (k 10 100 1000 10000 VCE = 10 V TA = 25°C 1000 100 10 1 0.1 0.01 100000 0.001 RBE- BASE RESISTANCE (k) 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (°C) Fig. 11 Output Symmetry Characteristics 10 NORMALIZED OUTPUT CURRENT 5 1 IF = I - 10mA I IF = I 10mA I .5 NORMALIZED TO: VCE = 10 V IF = 10 mA .1 .05 THE MAXIMUM PEAK OUTPUT CURRENT WILL BE NO MORE THAN THREE TIMES THE MINIMUM PEAK OUTPUT CURRENT AT IF = ±10 mA .01 .005 .01 .05 .1 .5 1 5 10 VCE- COLLECTOR TO EMITTER VOLTAGE (V) 4 H11AA1, H11AA3, H11AA2, H11AA4 Rev. 1.0.0 www.fairchildsemi.com H11AA1, H11AA3, H11AA2, H11AA4 AC Input/Phototransistor Optocouplers Fig. 7 Switching Speed vs. Load Resistor 1000 Package Dimensions (Surface Mount) PIN 1 ID. 0.350 (8.89) 0.330 (8.38) 0.270 (6.86) 0.240 (6.10) 3 2 PIN 1 ID. 1 SEATING PLANE 0.270 (6.86) 0.240 (6.10) 0.350 (8.89) 0.330 (8.38) 5 4 0.070 (1.78) 0.045 (1.14) 6 0.300 (7.62) TYP 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.135 (3.43) 0.200 (5.08) 0.165 (4.18) 0.016 (0.41) 0.008 (0.20) 0.020 (0.51) MIN 0.154 (3.90) 0.100 (2.54) 0.016 (0.40) 0.008 (0.20) 0.022 (0.56) 0.016 (0.41) 0° to 15° 0.020 (0.51) MIN 0.022 (0.56) 0.016 (0.41) 0.300 (7.62) TYP 0.100 (2.54) TYP 0.016 (0.40) MIN 0.315 (8.00) MIN 0.405 (10.30) MAX 0.100 (2.54) TYP Lead Coplanarity : 0.004 (0.10) MAX Package Dimensions (0.4"Lead Spacing) Recommended Pad Layout for Surface Mount Leadform 0.070 (1.78) 0.270 (6.86) 0.240 (6.10) 0.060 (1.52) SEATING PLANE 0.350 (8.89) 0.330 (8.38) 0.415 (10.54) 0.070 (1.78) 0.045 (1.14) 0.100 (2.54) 0.295 (7.49) 0.200 (5.08) 0.135 (3.43) 0.154 (3.90) 0.100 (2.54) 0.004 (0.10) MIN 0.030 (0.76) 0.016 (0.40) 0.008 (0.20) 0° to 15° 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.400 (10.16) TYP Note All dimensions are in inches (millimeters) 5 H11AA1, H11AA3, H11AA2, H11AA4 Rev. 1.0.0 www.fairchildsemi.com H11AA1, H11AA3, H11AA2, H11AA4 AC Input/Phototransistor Optocouplers Package Dimensions (Through Hole) H11AA1, H11AA3, H11AA2, H11AA4 AC Input/Phototransistor Optocouplers Ordering Information Option Order Entry Identifier S .S SD Surface Mount Lead Bend .SD W Surface Mount; Tape and Reel .W 300 0.4” Lead Spacing .300 300W VDE 0884 .300W 3S VDE 0884, 0.4” Lead Spacing .3S 3SD Description VDE 0884, Surface Mount .3SD VDE 0884, Surface Mount, Tape and Reel Carrier Tape Specifications (“D” Taping Orientation) 12.0 ± 0.1 4.85 ± 0.20 0.30 ± 0.05 4.0 ± 0.1 4.0 ± 0.1 Ø1.55 ± 0.05 1.75 ± 0.10 7.5 ± 0.1 13.2 ± 0.2 9.55 ± 0.20 0.1 MAX 10.30 ± 0.20 16.0 ± 0.3 Ø1.6 ± 0.1 User Direction of Feed Note All dimensions are in millimeters 6 H11AA1, H11AA3, H11AA2, H11AA4 Rev. 1.0.0 www.fairchildsemi.com H11AA1, H11AA3, H11AA2, H11AA4 AC Input/Phototransistor Optocouplers Marking Information 1 H11AA1 2 V XX YY K 6 3 5 4 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option – See order entry table) 4 Two digit year code, e.g., ‘03’ 5 Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code Reflow Profile (Black Package, No Suffix) Temperature (°C) 300 215°C, 10–30 s 250 225 C peak 200 150 Time above 183°C, 60–150 sec 100 50 • Peak reflow temperature: 225°C (package surface temperature) • Time of temperature higher than 183°C for 60–150 seconds • One time soldering reflow is recommended Ramp up = 3C/sec 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Time (Minute) 7 H11AA1, H11AA3, H11AA2, H11AA4 Rev. 1.0.0 www.fairchildsemi.com The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST ActiveArray™ FASTr™ Bottomless™ FPS™ Build it Now™ FRFET™ CoolFET™ GlobalOptoisolator™ CROSSVOLT™ GTO™ DOME™ HiSeC™ EcoSPARK™ I2C™ 2 E CMOS™ i-Lo™ EnSigna™ ImpliedDisconnect™ FACT™ IntelliMAX™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise Programmable Active Droop™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench QFET QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ SILENT SWITCHER SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic TINYOPTO™ TruTranslation™ UHC™ UltraFET UniFET™ VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I16 8 H11AA1, H11AA3, H11AA2, H11AA4 Rev. 1.0.0 www.fairchildsemi.com H11AA1, H11AA3, H11AA2, H11AA4 AC Input/Phototransistor Optocouplers TRADEMARKS