Chenmko H30D15PT High efficiency rectifier Datasheet

H30D05PT
CHENMKO ENTERPRISE CO.,LTD
THRU
HIGH EFFICIENCY RECTIFIER
VOLTAGE RANGE 50 - 600 Volts
H30D60PT
CURRENT 30 Amperes
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* Dual rectifier construction, positive centertap
* Glass passivated chip junctions
* Low power loss
* Low forward voltage, high current capability
* High surge current capability
* Ultra fast recovery times for high efficiency
* High temperature soldering guaranteed :
260oC/10 seconds at terminals
TO-247(TO-3P)
.645 (16.0)
.625 (15.9)
.085 (2.16)
.075 (1.90)
.245 (6.2)
.225 (5.7)
.135 (3.4)
.115 (2.9)
.093 (2.30)
.076 (1.97)
.840 (21.3)
.820 (20.8)
MECHANICAL DATA
.203 (5.16)
.193 (4.90)
.086 (2.18)
.076 (1.93)
Case: JEDEC TO-247 molded plastic
Terminals: Lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Weight: 5.6 grams ( Approximately )
.095 (2.4)
.085 (2.1)
.160 (4.1)
.140 (3.5)
.127 (3.22)
.117 (2.97)
.030 (.76)
.020 (.51)
.795 (20.2)
.775 (19.7)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
.225 (5.7)
.205 (5.2)
.048 (1.22)
.044 (1.12)
TO-247(TO-3P)
Dimensions in inches and (millimeters)
MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted )
H30D15PT
H30D20PT
H30D30PT
H30D60PT
UNITS
Maximum Recurrent Peak Reverse Voltage
RATINGS
SYMBOL
VRRM
50
100
150
200
300
400
500
600
Volts
Maximum RMS Voltage
VRMS
35
70
105
140
210
280
350
420
Volts
Maximum DC Blocking Voltage
VDC
50
100
150
200
300
400
500
600
Maximum Average Forward Rectified Current
H30D05PT H30D10PT
H30D40PT H30D50PT
Volts
IO
30.0
Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
250
Amps
Typical Junction capacitance per leg ( NOTE 1 )
CJ
R
Typical thermal resistance ( NOTE 2 )
Operating and Storage Temperature Range
200
140
pF
o
1.0
JC
TJ, TSTG
C/W
o
-65 to +150
C
ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted )
CHARACTERISTICS
SYMBOL
Maximum Instantaneous Forward Voltage at 15.0 A DC
Maximum DC reverse current
at rated DC blocking voltage per leg
Maximum reverse recovery time ( NOTE 3 ) per leg
NOTES : 1.
2.
3.
4.
H30D05PT H30D10PT
VF
H30D15PT
TC = 100oC
Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
Thermal resistance from junction to case per leg mounted on heatsink
Reverse recovery test conditions : IF = 0.5 A, Ir = -1.0 A, Irr = -0.25 A.
Suffix " C " = Common Cathod, Suffix " A " = Common Anode, Suffix " D " = Double.
H30D40PT H30D50PT
1.25
UNITS
Volts
uAmps
500
50
H30D60PT
1.50
10.0
IR
trr
H30D30PT
1.00
o
TC = 25 C
H30D20PT
75
nS
2001-6
RATING CHARACTERISTIC CURVES ( H30D05PT THRU H30D60PT )
22.5
15.0
Single
Half Wave 60HZ
Resistive or
Inductive Load
7.5
0
0
25
50
75
100
125
150
PEAK FORWARD SURGE CURRENT, (A)
AVERAGE FORWARD CURRENT, (A)
FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE
30.0
FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
300
8.3 ms Single Half
Sine-Wave (JEDEC Method)
250
200
150
100
50
0
0
2
4
CASE TEMPERATURE, ( oC )
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD
CHARCTERISTICS
40
60
100
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
H30D05PT~H30D20PT
10
H30D50PT&60PT
1.0
PULSE WIDTH=300uS
1% DUTY CYCLE
INSTANTANEOUS REVERSE CURRENT, (uA)
TJ = 25oC
100
0.1
TJ = 100oC
10
TJ = 75oC
1.0
TJ = 25oC
0.1
0
0.1
0.3
0.5
0.7
0.9
1.1
1.3
1.5
1.7
0
20
INSTANTANEOUS FORWARD VOLTAGE, (V)
40
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
TJ =25oC
100
H30D05PT~H30D20PT
H30D30PT~H30D60PT
10
.1
.4
60
80
100
140
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
1000
JUNCTION CAPACITANCE, ( pF )
INSTANTANEOUS FORWARD CURRENT, (A)
20
100
120
H30D30vP~H30D40PT
6 8 10
NUMBER OF CYCLES AT 60HZ
1.0
4
10
REVERSE VOLTAGE, ( V )
40
80
Similar pages