Micro Electronics H66T32BA 64-note rom memory dynamic speaker can be driven with external npn transistor Datasheet

HI-SINCERITY
MICROELECTRONICS CORP.
Spec. No. : HA200220
Issued Date : 1998.04.08
Revised Date : 2002.12.20
Page No. : 1/4
H66T19/32/68 Series
Description
The H66T19/32/68 series is a CMOS LSI designed for use in door bell,
telephone and toy applications. It is an on-chip ROM program-med for
music performance. Produced by COMS technology, the device results in
very low power consumption. Since the H66T19/32-/68 series includes
oscillation circuits, a compact melody module can be constructed with only
a few additional components.
TO-92
Feature
• 64-Note ROM memory
• 1.5V to 3V power supply and low power consumption
• Dynamic speaker can be driven with external NPN transistor
• OSC resistor is built-in
• Built-in level hold mode
• Power on reset: melody begins from the first note
Absolute Maximum Ratings
• DC Supply Voltage ............................................................................................................ 1.5 V to +3 V
• Operating Ambient Temperature..................................................................................... -10 °C to 60 °C
• Storage Temperature.................................................................................................... -55 °C to 125 °C
Pin Configuration
Pin No.
1
2
3
Symbol
Ground
Vin
Vout
Description
Negative Power Supply
Positive Power Supply
Melody Output
Song Titles
Part No.
H66T19AA
H66T19BA
H66T32AA
H66T32BA
H66T68AA
H66T68BA
Title
For Alice (Play time between 21s to 26s at Vcc=1.5V)
For Alice (Play time between 18.5s to 22.5s at Vcc=1.5V)
Coo Coo Waltz (Play time between 16.5s to 20s at Vcc=1.5V)
Coo Coo Waltz (Play time between 15s to 18.5s at Vcc=1.5V)
It's A Small World (Play time between 30s to 36s at Vcc=1.5V)
It's A Small World (Play time between 28s to 34s at Vcc=1.5V)
Note: During time bases on circuit in fig-2 in page 3.
H66T19XA, H66T32XA, H66T68XA
HSMC Product Specification
HI-SINCERITY
MICROELECTRONICS CORP.
Spec. No. : HA200220
Issued Date : 1998.04.08
Revised Date : 2002.12.20
Page No. : 2/4
Comment
Stress above those listed as "Absolute Maximum Ratings" may cause permanent damage to the device.
These are stress ratings only. Functions of this device at these or any other conditions above those
indicated in the operational sections of this specification is not implied. Any expos-ure to absolute
maximum rating conditions for extended periods may affect device reliability.
Electrical Characteristics
(VSS=0V, Ta=25°C, FOSC=65536Hz, unless otherwise specified)
Paramater
Operating Voltage
Operating Current
Drive Current
O/P Sink Current
Frequency Deviation Per Lot
Frequency Stability
Symbol
VDD
ID
IDrive
ISink
∆F/F
∆F/F
Min
1.5V
-12%
10%
Typ
-
Max
3V
20uA
200uA
5uA
+33%
-
Conditions
VDD=1.5V, O/P Open
VDD=1.3V, O/P=0.8V
VDD=1.3V, O/P=0.5V Open
VDD=1.5V
(FOSC(1.6V)-FOSC (1.3V))/FOSC(1.3V)
Functional Description
• Oscillator Circuit
The oscillation frequency is used for tone and beat generators. Its accuracy affects the quality of the
music.
• Tone Generator
Tone frequencies are oscillator frequencies-M, where M is any even number from 64 to 256. Within a
melody 14 scales can be selected including PAUSE code and END code. The tone generator is a
programmed divider. The range of scales is from "C4" to "C6" and that for freq-uency varies from
258Hz to 23768Hz.
• Rhythm Generator
The rhythm generator is also a programmed divider. It contains 15 available rhythms as follows:
1/4
1/2
3/4
1
1-1/4
1-1/2
1-3/4
2
2-1/4
2-1/2
2-3/4
3
3-1/4
3-1/2
3-3/4
J. Four rhythms can be selected from these.
• Melody Rom
The Mask ROM can memorize 64 notes with 6 bits. 4 bits are used for controlling the scale co-de and
2 bits are used for controlling the rhythm code.
• Tempo Generator
There are 15 available tempos in the H66T19/32/68 Series. The 15 tempos are: 128, 137, 148, 160,
175, 192, 213, 240, 274, 320, 480, 640, 960, 1920 J / minute.
H66T19XA, H66T32XA, H66T68XA
HSMC Product Specification
HI-SINCERITY
Spec. No. : HA200220
Issued Date : 1998.04.08
Revised Date : 2002.12.20
Page No. : 3/4
MICROELECTRONICS CORP.
Application Circuits
Fig-1
H66T19/32/68 Series
Vin
3
2
Vout
Buzzer
Switch
1
Ground
1.5V-3.0V
Fig-2
H66T19/32/68 Series
R1
1.5V-3.0V
Vin
2
3
Vout
220 ohm
Buzzer
1
C1
1uF
Switch
Fig-3
Ground
H66T19/32/68 Series
Switch
Vin
Speaker
2
1.5V-3.0V
C1
1uF
3
R1
Vout 4.7K
1
Q1
HE8050S
Ground
Fig-4
R2
220
Speaker
Vin
1.5V-3.0V
2
Switch
R1
C1
1uF
3
1
Vout
4.7K
Q1
HE8050S
Ground
H66T19/32/68 Series
H66T19XA, H66T32XA, H66T68XA
HSMC Product Specification
HI-SINCERITY
Spec. No. : HA200220
Issued Date : 1998.04.08
Revised Date : 2002.12.20
Page No. : 4/4
MICROELECTRONICS CORP.
TO-92 Dimension
α2
A
Marking:
HSMC Logo
B
Product Series
Part Number
1
2
3
Date Code
Rank
α3
C
Laser Mark
HSMC Logo
Product Series
D
Part Number
H
I
Ink Mark
G
α1
Style: Pin 1.Ground 2.Vin 3.Vout
E
F
3-Lead TO-92 Plastic Package
HSMC Package Code: A
*: Typical
Inches
Min.
Max.
0.1704
0.1902
0.1704
0.1902
0.5000
0.0142
0.0220
*0.0500
0.1323
0.1480
DIM
A
B
C
D
E
F
Millimeters
Min.
Max.
4.33
4.83
4.33
4.83
12.70
0.36
0.56
*1.27
3.36
3.76
DIM
G
H
I
α1
α2
α3
Inches
Min.
Max.
0.0142
0.0220
*0.1000
*0.0500
*5°
*2°
*2°
Millimeters
Min.
Max.
0.36
0.56
*2.54
*1.27
*5°
*2°
*2°
Notes: 1.Dimension and tolerance based on our Spec. dated Apr. 25,1996.
2.Controlling dimension: millimeters.
3.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material.
4.If there is any question with packing specification or packing method, please contact your local HSMC sales office.
Material:
• Lead: 42 Alloy; solder plating
• Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0
Important Notice:
• All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of HSMC.
• HSMC reserves the right to make changes to its products without notice.
• HSMC semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems.
• HSMC assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
Head Office And Factory:
• Head Office (Hi-Sincerity Microelectronics Corp.): 10F.,No. 61, Sec. 2, Chung-Shan N. Rd. Taipei Taiwan R.O.C.
Tel: 886-2-25212056 Fax: 886-2-25632712, 25368454
• Factory 1 : No. 38, Kuang Fu S. Rd., Fu-Kou Hsin-Chu Industrial Park Hsin-Chu Taiwan. R.O.C
Tel: 886-3-5983621~5 Fax: 886-3-5982931
H66T19XA, H66T32XA, H66T68XA
HSMC Product Specification
Similar pages