Product Data Sheet 1 WATT UNREGULATED DC/DC CONVERTERS HB01U APPLICATIONS ● ● ● ● ● ● ● INDUSTRIAL PROCESS CONTROL DC MOTOR DRIVE INTRINSIC SAFETY SYSTEMS GROUND LOOP ELIMINATION MEDICAL EQUIPMENT PORTABLE TEST EQUIPMENT DATA ACQUISITION DESCRIPTION FEATURES The HB01U Series offers a wide selection of input and output voltages to choose from. Each model is offered in a 24-pin DIP or SMD package and has an input to output isolation rating of 2500Vrms making it ideal for applications requiring high isolation. The dielectric withstand characteristics of each converter are measured in production to ensure barrier integrity. ● ● ● ● ● ● ● ● ● ● The HB01U Series is ideal for applications where the output is susceptible to high voltage transients, such as motor drive and industrial process control applications. The low barrier capacitance gives excellent input to output dV/dt characteristics thus protecting the input control circuitry from peak transients appearing on the output. HIGH ISOLATION 2500Vrms ISOLATION TEST VOLTAGE BARRIER 100% PRODUCTION TESTED LOW BARRIER CAPACITANCE - 10pF LOW LEAKAGE CURRENT - 2µA MAX 24-PIN DIP AND SMD INTERNAL FILTERING NON-CONDUCTIVE CASE LOW COST LOW PROFILE - .375" The HB01U Series uses a self-oscillating circuit design technology to realize low cost and high performance. The inherent current limiting capability of the high isolation design reduces high current stresses during start-up thus increasing the capacitive load capability while maintaining high reliability. As with all of our DC/DC converters, surface mount construction combined with extensive qualification testing assures low cost without sacrificing quality and reliability. Internet: http://www.cdpowerelectronics.com Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 Phone: 800.547.2537 Fax: 520.770.9369 HB01U 11/98 REV B Power Electronics Division, Europe C&D Technologies (Power Electronics) Ltd. 132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland Tel: +353.61.474.133 Fax:+353.61.474.141 Page 1 ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. NOMINAL INPUT VOLTAGE MODEL RATED OUTPUT VOLTAGE RATED OUTPUT CURRENT INPUT CURRENT MIN LOAD RATED LOAD EFFICIENCY (VDC) (VDC) (mA) (mA) HB01U05S05 HB01U05S12 HB01U05S15 5 5 5 5 12 15 200 83 67 63 63 63 290 290 290 68 70 73 HB01U12S05 HB01U12S12 HB01U12S15 12 12 12 5 12 15 200 83 67 20 20 20 120 120 114 68 70 73 HB01U15S05 HB01U15S12 HB01U15S15 15 15 15 5 12 15 200 83 67 25 25 25 98 95 90 68 70 73 HB01U24S05 HB01U24S12 HB01U24S15 24 24 24 5 12 15 200 83 67 13 13 13 61 60 57 68 70 73 HB01U05D05 HB01U05D12 HB01U05D15 5 5 5 ±5 ±12 ±15 ±100 ±42 ±34 63 63 63 290 285 275 68 70 73 HB01U12D05 HB01U12D12 HB01U12D15 12 12 12 ±5 ±12 ±15 ±100 ±42 ±34 20 20 20 123 118 114 68 70 73 HB01U15D05 HB01U15D12 HB01U15D15 15 15 15 ±5 ±12 ±15 ±100 ±42 ±34 25 25 25 98 95 90 68 70 73 HB01U24D05 HB01U24D12 HB01U24D15 24 24 24 ±5 ±12 ±15 ±100 ±42 ±34 13 13 13 61 60 57 68 70 73 MIN TYP MAX UNITS 4.5 10.8 13.5 20 5 12 15 24 35 5.5 13.2 16.5 30 VDC VDC VDC VDC mAp-p (mA) (%) COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER CONDITIONS INPUT Voltage Range Reflected Ripple Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficent Ripple & Noise Line Regulation Load Regulation GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217, Rev. F Ground Benign TEMPERATURE Specification Operation Storage Page 2 60 Hz, 10 Seconds 3535 2500 VDC Vrms 10 10 1 VISO= 240VAC, 60Hz 1 ±3 ±0.02 50 25 ±1.5 BW = DC to 10MHz BW =10Hz to 2MHz High Line to Low Line See Performance Curves (Min Load =1mA) Circuit Stress Method TA = +25°C -25 -40 -40 2 ±5 GΩ pF µArms W % %/°C mVp-p mVrms %/% Vin 160 12 kHz g 2,000,000 Hr +70 +85 +110 °C °C °C HB01U 11/98 REV B MECHANICAL Package/Pinout "Y" and "Z" DIP PACKAGE SMD PACKAGE 1.285±0.010" (32.64±0.25) 1.285±0.010" (32.64±0.25) 2423 22 0.525±0.010" (13.34±0.25) 2423 22 1514 13 HB01UxxyzzY 1 2 3 0.525±0.010" (13.34±0.25) TOP VIEWS HB01UxxyzzZ 1 2 3 10 11 12 0.375±0.005" (9.52±0.13) 0°-15° 0.600" (15.24) 0.015±0.005" (0.38±0.13) 0.020±0.002" (0.51±0.05) 0.100±0.010" (2.54±0.25) 0.125+0.030" -0.000" (3.18+0.76) ( -0.00) 0.695±0.015" (17.65±0.38) 10 11 12 0.375±0.005" (9.52±0.13) SIDE VIEWS 0.015±0.005" (0.38±0.13) 1514 13 END VIEWS 0.100±0.010" (2.54±0.25) 0.014±0.002" (0.36±0.05) NU = Do Not Use. 0.020±0.002" (0.51±0.05) .015±.010" (.38±.25) PIN CONNECTIONS NC = No Internal Connection. PIN# Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). SINGLES DUALS 1 2 3 +V OUT -VOUT NU +V OUT Common -VOUT 10 11 12 -VIN NC +V IN -VIN NC +V IN 13 14 15 +V IN NC -VIN +V IN NC -VIN 21 22 23 24 NC NU -VOUT +V OUT NC -VOUT Common +V OUT GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo. MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance, wide operating temperature range, and good electrical properties under high humidity environments. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is brass with a solder plated surface to allow ease of solderability. RECOMMENDED LAND PATTERN RECOMMENDED REFLOW PROFILE 30 sec MAX (>220°C) 0.100" (2.54) 250 235 °C MAX 2423 22 220 1514 13 200 0.040" (1.02) 1 2 3 10 11 12 1.150" (29.21) TEMPERATURE (°C) 0.080" (2.03) 0.730" (18.54) 190 150 100 90 sec MAX (>190°C) 50 TIME (seconds) HB01U 11/98 REV B Page 3 ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation...................................................0.5 Watt Short Circuit Duration...............................................................5 Min Lead Temperature (soldering, 10 seconds max)..................+300°C HB01U xxyzz Y/Z /H Device Family HB Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option Screening Option * *Note: Refer to Reflow Profile for SMD Models. TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. VOUT VS LOAD (±5Vout Models) 6.0 5.7 5.8 Vout (Volts) Vout (Volts) VOUT VS LOAD (5Vout Models) 5.9 5.5 5.3 5.6 5.4 5.1 5.2 4.9 5.0 1 20 150 100 80 Load (mA) 200 1 20 12.5 12.6 12.4 12.5 12.4 12.3 100 30 40 30 34 12.3 12.2 12.1 1 10 30 50 70 12.0 90 1 5 10 20 Load (mA) Load (mA) VOUT VS LOAD (15Vout Models) VOUT VS LOAD (±15Vout Models) 15.4 15.4 15.3 15.3 Vout (Volts) Vout (Volts) 12.2 80 VOUT VS LOAD (±12Vout Models) 12.7 Vout (Volts) Vout (Volts) VOUT VS LOAD (12Vout Models) 60 40 Load (mA) 15.2 15.1 15.2 15.1 15.0 15.0 14.9 14.9 1 10 20 40 60 67 1 Load (mA) 5 10 20 Load (mA) EFFICIENCY VS LOAD Efficiency (%) 80 70 60 50 40 30 20 40 60 80 100 Load (mA) The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES product for use in life support devices/systems or in aircraft control applications. Page 4 HB01U 11/98 REV B