Dialight HB1C4N-EUD Durositeâ® series led high bay luminaire - ce approved Datasheet

Application:
The first of its kind, the Dialight DuroSite® LED High Bay luminaire was designed
specifically to replace conventional lighting in a wide variety of industrial
applications, both indoor and outdoor. Its low profile, light weight design
and versatile mounting options make it ideal for many applications such as
for many applications such as high bay lighting, warehouse, factories, cold
stores, restricted access areas, service areas and other applications with
mounting heights greater than 4 meters.
All of Dialight’s long life LED luminaires are designed to meet the most
demanding specification criteria while offering maximum energy
savings, reduced maintenance costs, and a superior quality of light.
Hazardous area versions are also available.
Mechanical Information
DuroSite® Series LED High Bay
Luminaire - CE Approved
Fixture Weight:
8.2 kg (18 lbs)
Mounting:
Swivel bracket or hook (see page 2)
1
Fixing :
(6) 1/4”-20 SELF TAPPING
SCREW HOLE
Factory installed 3 meter 3 core PVC cable
Factory installed junction box (see ordering note,
for mechanical drawing see page 4)
Custom cable lengths available (consult factory)
47.75 [1.88]
Electrical specifications
Operating Voltage, Input Current, Power Consumption: See Table
174.75
[6.88]
Operating Temp:
-40°C to +65°C (-40°F to +149°F)
Harmonics:
EN 61000-3-2
Surge Protection:
EN 61000-4-5
1 kV line to line
2 kV line to ground
THD:
<5% (120VAC)
<10% (230/240VAC)
<12% (277VAC)
Power Factor:
> 0.9
406.40
[16.00]
3.05m
[10’]
cord
49.53
[1.95]
Construction
76.20
[3.00]
406.40
[16.00]
18-5/16” X .75” THREADED (2)
Housing:
LM6 marine grade aluminium
Finish:
Light grey powder coated (RAL7001)
Lens:
Acrylic (PMMA)
Polycarbonate (PC)
Tempered Glass
Dimensions in mm [Inches]
Certifications & Ratings:
Photometric Information
• CE - compliant
EN 55015:2006 / EN 61547:2009 / EN 60598:2008
• BS EN 62471:2008
• Gost R approval
• IEC60068 salt spray testing- severity 1
• IK10 to EN50102 (polycarbonate lens only)
• IP66 to EN60529
CRI:
> 70
CCT:
5,650K (cool white)
4,300K (neutral white)
All values typical unless otherwise state
Operating Voltage
Input Wattage
Input Current
277
134
0.5
230
137
0.6
200
137
0.7
150
139
0.9
120
141
1.2
100
144
1.4
All measurements taken at 25°C ambient, all values +/-15%
Features & Benefits:
• 5 year full performance warranty
• Zone 1 hazardous area versions also available
• May be used with remote occupancy sensor
• Instant on/off operation
• Superior colour rendition index compared to HPS, LPS, MV
• Mercury free, lead free
• Replaces up to 400 Watt HID light sources
• Resistant to shock and vibration
• Temperature compensation technology for longer life
• L70 rated for 100,000 hours @ 25°C
Order Codes:
Lens
2
Part Number
IP66
(Acrylic Lens)
HBGC4P-EU
HB6C4M-EU
HB2C4M-EU
HB7C4M-EU
HB1C4N-EU
HB6C4N-EU
HB0C4M-EU
HB4C4M-EU
HB5C4N-EU
HB3C4N-EU
•
•
•
•
•
IP66 to EN60529
(Polycarbonate Lens)
(Tempered Glass Lens)
•
•
•
•
•
Optical Pattern
3
Clear
•
•
•
•
•
•
Diffused
Circular
•
•
•
•
•
•
•
•
1
•
Aisle
•
•
•
•
•
CCT
Cool
Cool
Cool
Cool
Cool
Cool
Cool
Cool
Cool
Cool
White
White
White
White
White
White
White
White
White
White
Initial Fixture
Lumens
14,000
11,500
10,000
9,750
11,500
11,500
10,000
10,750
10,750
10,750
Lumens
Per Watt4
90
82
71
70
82
82
71
77
77
77
Part numbers in the above table include 3M PVC cable, for units including an attached junction box replace prefix HB with HBJ in the order
code, HB2C4M-EU becomes HBJ2C4M-EU. For mechanical drawing see page 4.
2
Circular optical pattern, polycarbonate lens part numbers can be ordered with a factory installed dome lens. For dome lens option ; replace
3rd numeral with L, HB2C4M-EU becomes HBLC4M-EU For mechanical drawing see page 4.
3
Part numbers in the above table are cool white models, for neutral white replace the 3rd character C with N in the order code,
HB2C4M-EU becomes HB2N4M-EU
4
Lumens per Watt calutated based on 140W except for HBG2C4P-EU
5
HBG2C4P-EU is available in 230/240VAC only. Lumen values for HBG2C4P-EU is based on 156W @ 230 VAC, electrical specifications chart does
not apply to this part number
www.dialight.com
DuroSite® Series LED High Bay Fixture Options and Accessories
Variable Dimming Version: 0-10 VDC
Application:
Dialight offers a series of High Bay products with ACTIVE Dimming.
Dimming permits the user to select a specific light output and power consumption to meet their requirements. The reduction in light output and
power consumption are approximately proportional. Reducing the light
output by 50% will reduce the power consumption by 50%. LEDs are particularly well suited for dimming as compared to other industrial light
sources.
(6) 1/4”-20 SELF TAPPING
SCREW HOLE
Mechanical, Electrical and Photometric information is the same
as on page 1 except where detail is provided
47.75 [1.88]
1
Variable Dimming Cable : Dimming connections included in
factory installed 5 core cable. Multiple
high bays can be connected to the
same dimmer, consult dimming instructions and manufacturer
174.75
[6.88]
Variable Dimming
Control:
406.40
[16.00]
0-10 VDC active
Dimming Range
3.05m
[10’]
cord
49.53
[1.95]
10 VDC = 100% light output
0 VDC = 15% light output
Features and Benefits
• 3 meter, 5 core PVC cable pre-installed
76.20
[3.00]
• Dimming cabling independent of fixture wiring
18-5/16” X .75” THREADED (2)
406.40
[16.00]
• Multiple High Bays can be connected to the same dimmer
Dimensions in mm [Inches]
• May also be configured to operate in a single STEP Dimming
configuration, please consult technical department
STEP Dimming Mode
The variable dimming High Bays may also be configured to operate in a
single STEP Dimming configuration.
When the dimming control
conductors are connected together, the light output will be reduced to
approximately 15% of the maximum light output. The total fixture power
consumption will also be reduced to approximately 20% (30 W).
Connecting the leads together can be accomplished with a common
wall switch.
Order Codes:
Lens
Optical Pattern
2
IP66
IP66 to EN60529
Part Number
(Acrylic Lens) (Polycarbonate Lens)
HB7C4M-EUD
HB6C4N-EUD
•
•
•
•
HB0C4M-EUD
HB4C4M-EUD
HB5C4N-EUD
HB3C4N-EUD
Clear
•
•
HB2C4M-EUD
HB1C4N-EUD
3
•
•
Diffused
Circular
•
•
•
•
•
•
•
Aisle
Cool White
•
•
•
•
•
•
•
1
CCT
•
•
Initial
Fixture
Lumens
Lumens4
Per Watt
10,000
71
Cool White
9,750
70
Cool White
11,500
82
Cool White
11,500
82
Cool White
10,000
71
Cool White
10,750
77
Cool White
10,750
77
Cool White
10,750
77
Part numbers in the above table include 3M PVC cable, for units including an attached junction box replace prefix HB with HBJ in the order
code, HB2C4M-EUD becomes HBJ2C4M-EUD. For mechanical drawing see page 4.
2
Polycarbonate lens part numbers can be ordered with a factory installed dome lens. For dome lens option replace prefix HB with HBL in the
order code, HB2C4M-EUD becomes HBL2C4M-EUD For mechanical drawing see page 4.
3
Part numbers in the above table are cool white models, for neutral white replace the 3rd character C with N in the order code,
HB2C4M-EUD becomes HB2N4M-EUD
4
Lumens per Watt calutated based on 140W.
www.dialight.com
DuroSite® LED High Bay Fixture Options and Accessories
Occupancy Sensor Version
Application:
Dialight offers a series of High Bay products with an attached
occupancy sensor. The occupancy sensor leverages the High Bay’s
instant-on and instant-off capability to increase energy savings and
enhance ROI. Other industrial lighting sources such as HID fixtures do not
offer instant-on capability. Sensor can be programmed by the user
during installation and commissioning via a IR remote control (sold
separately), one remote can program an infinite number of luminaires.
Mechanical, Electrical and Photometric information is the same
as on page 1 except where detail is provided
Gland entries (2) x M20
Weight:
8.6kg (19lbs)
Sensor Mounting:
Attached to the luminaire via a bracket,
cable connected via junction box on the
luminaire
Sensor Timing
30 seconds to 20 minutes
Sensor operation
Dependant on application and height,
please consult technical department
Operating voltage
230/240 VAC only
290
151
80
413
Operating Temperature
Dimensions in mm
-10oC + 50oC (-14oF + 122oF)
-25oC + 50oC (-13oF + 122oF) version
available, consult factory
Features and Benefits
• No additional electrical connections required for installation
Ordering Info:
Part Number
• Remote control for on site programming during commissioning
Description
HBX-RC
IR remote control
• Dimming option available please consult factory for details
Lens
Optical Pattern
1
Part Number
IP66
IP66 to EN60529
(Acrylic Lens) (Polycarbonate Lens)
HB7C4M-EUOS
HB6C4N-EUOS
•
•
•
•
HB0C4M-EUOS
HB4C4M-EUOS
HB5C4N-EUOS
HB3C4N-EUOS
Clear
•
•
HB2C4M-EUOS
HB1C4N-EUOS
2
•
•
Diffused
Circular
•
•
•
•
•
•
•
Aisle
•
•
•
•
•
•
•
1
•
•
CCT
Initial
Fixture
Lumens
Lumens
Per Watt3
Cool White
10,000
71
Cool White
9,750
70
Cool White
11,500
82
Cool White
11,500
82
Cool White
10,000
71
Cool White
10,750
77
Cool White
10,750
77
Cool White
10,750
77
Polycarbonate lens part numbers can be ordered with a factory installed dome lens. For dome lens option replace prefix HB with HBL in the
order code, HB2C4M-EUOS becomes HBL2C4M-EUOS For mechanical drawing see page 4.
2
Part numbers in the above table are cool white models, for neutral white replace the 3rd character C with N in the order code,
HB2C4M-EUOS becomes HB2N4M-EUOS
3
Lumens per Watt calutated based on 140W.
www.dialight.com
DuroSite® Series LED High Bay Fixture
Accessories
Part Number
Description
Kit Includes
HBXW3
Swivel Bracket
Grey (RAL7001) powder coated aluminium
(Interior or exterior use)
Swivel Bracket
Bracket to fixture hardware
HBXH-EU
Hook
(IP40)
HBXGS
Glare Shield - sets of 10
Grey (RAL7001) powder coated spun aluminium
(Interior use only, for use with flat lens options)
Aluminium shield and securing hardware
HBXREF2
558.8mm Acrylic Reflector
(for use with HBXH only)
Dust cover, clamp, space
Hanger Hook
Mechanical Drawings
HBLXX4X - Dome Lens
HBJXX4X - Junction Box
151
369,7
(14.55)
119,9
(4.72)
413
263,5
(10.37)
HBXW3 - Swivel Bracket
HBXX4X-EU
Dimensions in mm [Inches]
Polar Plots
Circular Pattern
Aisle Pattern
Dialight reserves the right to make changes at any time in order to supply the best product possible. The most current version of this
document will always be available at: www.dialight.com/Assets/Brochures_And_Catalogs/Illumination/MDEXHBEU001.pdf
www.dialight.com
MDEXHBEU001_E
Similar pages