HCC/HCF4017B HCC/HCF4022B COUNTERS/DIVIDERS 4017B DECADE COUNTER WITH 10 DECODED OUTPUTS 4022B OCTAL COUNTER WITH 8 DECODED OUTPUTS .. . . . .. . FULLY STATIC OPERATION MEDIUM SPEED OPERATION-12MHz (typ.) AT VDD = 10V STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE INPUT CURRENT OF 100nA AT 18V AND 25°C FOR HCC DEVICE 100% TESTED FOR QUIESCENT CURRENT 5V, 10V, AND 15V PARAMETRIC RATINGS MEETS ALL REQUIREMENTS OF JEDEC TENTATIVE STANDARD N° 13A, ”STANDARD SPECIFICATIONS FOR DESCRIPTION OF ”B” SERIES CMOS DEVICES” EY (Plastic Package) F (Ceramic Frit Seal Package) M1 (Micro Package) C1 (Plastic Chip Carrier) ORDER CODES : HCC40XXBF HCF40XXBM1 HCF40XXBEY HCF40XXBC1 PIN CONNECTIONS DESCRIPTION The HCC4017B/4022B (extended temperature range) and HCF4017B/4022B (intermediate temperature range) are monolithic integrated circuits, available in 16-lead dual in-line plastic or ceramic package and plastic micro package. The HCC/HCF4017B and HCC/HCF4022B are 5stage and 4-stage Johnson counters having 10 and 8 decoded outputs, respectively. Inputs include a CLOCK, a RESET, and a CLOCK INHIBIT signal. Schmitt trigger action in the CLOCK input circuit provides pulse shaping that allows unlimited clock input pulse rise and fall times. These counters are advanced one count at the positive clock signal transition if the CLOCK INHIBIT signal is low. Counter advancement via the clock line is inhibited when the CLOCK INHIBIT signal is high. A high RESET signal clears the counter to its zero count. Use of the Johnson decade-counter configuration permits high-speed operation, 2-input decimal-decode gating, and spike-free decoded outputs. Anti-lock gating is provided, thus assuring proper counting sequence. The decoded outputs are normally low and go high only at their respective decoded time slot. Each decoded output remains high for one full clock cycle. A CARRY-OUT signal completes one June 1989 4017B 4022B 1/12 HCC/HCF4017B/4022B cycle every 10 clock input cycles in the HCC/HCF4017B or every 8 clock input cycles in the HCC/HCF4022B and is used to ripple-clock the succeeding device in a multi-device counting chain. FUNCTIONAL DIAGRAM 4017B 4022B ABSOLUTE MAXIMUM RATINGS Symbol V DD* Parameter Supply Voltage : HCC Types HC F Types Value Unit – 0.5 to + 20 – 0.5 to + 18 V V VI Input Voltage – 0.5 to V DD + 0.5 V II DC Input Current (any one input) ± 10 mA Total Power Dissipation (per package) Dissipation per Output Transistor for T o p = Full Package-temperature Range 200 mW 100 mW Pt ot Top Operating Temperature : HCC Types H CF Types – 55 to + 125 – 40 to + 85 °C °C Tstg Storage Temperature – 65 to + 150 °C Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltages values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol V DD VI Top 2/12 Parameter Supply Voltage : HCC Types HC F Types Input Voltage Operating Temperature : HCC Types H CF Types Value Unit 3 to 18 3 to 15 V V 0 to V DD V – 55 to + 125 – 40 to + 85 °C °C HCC/HCF4017B/4022B LOGIC DIAGRAMS 4017B 4022 3/12 HCC/HCF4017B/4022B TIMING DIAGRAMS 4017B 4022B 4/12 HCC/HCF4017B/4022B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Test Conditions Symbol IL VOH VOL Parameter Quiescent Current VI (V) VO (V) VIL IOH Typ. Max. Min. Max. 0.04 5 150 HCC 0/10 Types 0/15 10 10 0.04 10 300 15 20 0.04 20 600 0/20 20 100 0.08 100 3000 0/ 5 HCF 0/10 Types 0/15 5 20 0.04 20 150 10 40 0.04 40 300 15 80 0.04 80 600 Output Low Voltage 0/ 5 < 1 5 4.95 4.95 4.95 < 1 10 9.95 9.95 9.95 0/15 < 1 15 14.95 14.95 14.95 5/0 < 1 5 0.05 0.05 0.05 < 1 10 0.05 0.05 0.05 CI 15 < 1 5 3.5 3.5 3.5 1/9 < 1 10 7 7 7 1.5/13.5 < 1 15 11 4.5/0.5 < 1 5 1.5 1.5 1.5 9/1 < 1 10 3 3 3 13.5/1.5 < 1 15 11 4 4 – 1.15 0/ 5 4.6 5 – 0.64 – 0.51 – 0.36 0/10 9.5 10 – 1.6 – 1.3 – 2.6 – 0.9 0/15 13.5 15 – 4.2 – 3.4 – 6.8 – 2.4 0/ 5 2.5 5 – 1.53 – – 3.2 1.36 – 1.1 0/ 5 4.6 5 – 0.52 – 0.44 – 0.36 0/10 9.5 10 – 1.3 – 1.1 – 2.6 – 0.9 0/15 13.5 15 – 3.6 – 3.0 – 6.8 – 2.4 0/ 5 0.4 5 0.64 0.51 1 0.36 0.5 10 1.6 1.3 2.6 0.9 1.5 15 4.2 3.4 6.8 2.4 0.4 5 0.52 0.44 1 0.36 0.5 10 1.3 1.1 2.6 0.9 1.5 15 3.6 6.8 2.4 Any Input – 1 mA mA 18 ± 0.1 ±10–5 ± 0.1 ± 1 15 ± 0.3 ±10–5 ± 0.3 ± 1 Any Input HCF 0/15 Types – 1 5 7.5 V 4 – 1.6 – 3.2 3.0 V 11 – 2 HCC 0/18 Types V 0.05 5 HCC 0/10 Types 0/15 Input Capacitance 0.05 2.5 HCF 0/10 Types 0/15 Input Leakage Current < 1 0.5/4.5 0/ 5 0/ 5 IIH, IIL 0.05 µA V 10/0 Input Low Voltage Output Sink Current Max. Min. 0/10 Input High Voltage HCC Types Min. Unit THigh* 5 HCF Types IOL 25 °C T Low* 5 Output High Voltage Output Drive Current Value V DD (V) 0/ 5 15/0 VIH | IO | (µA) µA pF * TLo w = – 55°C for HCC device : – 40°C for HCF device. * THigh = + 125°C for HCC device : + 85°C for HCF device. The Noise Margin for both ”1” and ”0” level is : 1V min. width VDD = 5V, 2V min. width VDD = 10V, 2.5V min. width VDD = 15V. 5/12 HCC/HCF4017B/4022B DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb = 25°C, CL = 50pF, RL = 200kΩ, typical temperature coefficient for all VDD = 0.3%/°C values, all input rise and fall time = 20ns) Symbol Parameter Test Conditions Value V DD (V) Min. Typ. Max. Unit CLOCKED OPERATION tPLH, tPHL Propagation Delay Time Decode Out Carry Out tTHL, tTLH fCL * tW tr, tf Transition Time Carry Out or Decoded Out Line Maximum Clock Input Frequency Minimum Clock Pulse Width Clock Input Rise or Fall Time 5 325 650 10 135 270 15 85 170 5 300 600 10 125 250 15 80 160 5 100 200 10 50 100 15 40 80 5 5 2.5 5 10 5 10 15 5.5 11 ns ns ns MHz 5 100 200 10 45 90 15 30 60 ns 5 10 µs Unlimited 15 tsetup Data Setup Time Minimum Clock Inhibit 5 115 230 10 50 100 15 35 7.5 5 265 530 10 115 230 ns RESET OPERATION tPLH, tPHL tW trem Propagation Delay Time Carry Out or Decode Out Lines Minimum Reset Pulse Width Minimum Reset Removal Time * Measured with respect to carry output line. 6/12 15 85 170 5 130 260 10 55 110 15 30 60 5 200 400 10 140 280 15 75 150 ns ns ns HCC/HCF4017B/4022B Typical Output Low (sink) Current Characteristics. Minimum Output Low (sink) Current Characteristics. Typical Output High (source) Current Characteristics. Minimum Output High (source ) Current Characteristics. TYPICAL APPLICATIONS Divide by N Counter (N ≤ 10) with N Decoded Outputs. When the Nth decoded output is reached (Nth clock pulse) the S-R flip-flop (constructed from two NOR gates of the HCC/HCF4001B) generates a reset pulse which clears the HCC/HCF4017B to its zero count. At this time, if the Nth decoded output is greater than or equal to 6, the COUT line goes high to clock the next HCC/HCF4017B counter section. The ”0” decoded output also goes high at this time. Coincidence of the clock low and decoded ”0” output high resets the S-R flip flop to enable the th HCC/HCF4017B. If the N decoded output is less than 6, the COUT line will not go high and, therefore, cannot be used. In this case ”0” decoded output may be used to perform the clocking function for the next counter. 7/12 HCC/HCF4017B/4022B Plastic DIP16 (0.25) MECHANICAL DATA mm DIM. MIN. a1 0.51 B 0.77 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 8/12 HCC/HCF4017B/4022B Ceramic DIP16/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7 0.276 D E 3.3 0.130 0.38 e3 0.015 17.78 0.700 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 0.51 1.27 0.020 0.050 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.200 P053D 9/12 HCC/HCF4017B/4022B SO16 (Narrow) MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.004 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 9.8 E 5.8 10 0.385 6.2 0.228 0.393 0.244 e 1.27 0.050 e3 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.62 0.024 8° (max.) P013H 10/12 HCC/HCF4017B/4022B PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 11/12 HCC/HCF4017B/4022B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 12/12