规格书编号 SPEC NO : 产品规格书 SPECIFICATION CUSTOMER 客 户： PRODUCT 产 品： SAW FILTER MODEL NO 型 号： HDBF44A3Dc SIP5Dc PREPARED 编 制： CHECKED 审 核： APPROVED 批 准： D A T E 日 期： 2008-11-28 客户确认 CUSTOMER RECEIVED: 审核 CHECKED 批准 APPROVED 日期 DATE 无锡市好达电子有限公司 Shoulder Electronics Limited www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 1 of 10 SAW FILTER HDBF44A3Dc SIP5Dc 更改历史记录 History Record 更改日期 Date www.shoulder.cn 规格书编号 Spec. No. 产品型号 Part No. 客户产品型号 Customer No. Tel:0755-82916880 Fax:0755-82916881 更改内容描述 Modify Content E-mail:[email protected] 备注 Remark Page 2 of 10 SAW FILTER HDBF44A3Dc SIP5Dc 1.SCOPE SHOULDER’s SAW filter series have broad line up products meeting all broadcast standard including NTSC,PAL and SECAM systems. These filters are composed of two interdigital transducers on a single-crystal. piezoelectrical chip. they are used in electronic equipments such as TV and so on. 2.Construction 2.1 Dimension and materials Manufacturer’s name : SHOULDERELECTRONICS Co. LTD(CHINA) Type : BF44A3Dc YY:year WW:week www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 3 of 10 SAW FILTER HDBF44A3Dc SIP5Dc 2.2. Circuit construction, measurement circuit 3.Characteristics Items Standard atmospheric conditions Conditions Unless otherwise specified , the standard rang of atmospheric conditions for making measurements and tests is as follows; Ambient temperature : 15℃ to 35℃ Relative humidity : 25% to 85% Air pressure : 86kPa to 106kPa Operating temperature rang Operating temperature rang is the rang of ambient temperatures in which the filter can be operated continuously. -10℃ ~ +60℃ Storage temperature rang Storage temperature rang is the rang of ambient temperatures at which the filter can be stored without damage. Conditions are as specified elsewhere in these specifications. -40℃ ~ +70℃ Reference temperature +25℃ 3.1 Maximum Rating DC voltage VDC AC voltage Vpp www.shoulder.cn Tel:0755-82916880 12 10 Fax:0755-82916881 V V Specifications There shall be no damage. Between any terminals Between any terminals E-mail:[email protected] Page 4 of 10 SAW FILTER HDBF44A3Dc SIP5Dc 3.2 Electrical Characteristics Characteristics of channel 1 (switching input pin 2 connected to ground pin 3) Source impedance Load impedance Item Center frequency Insertion attenuation Reference level Zs=50Ω ZL=2kΩ//3pF Freq Fo min - typ 44.00 44.06MHz 12.5 14.5 16.5 dB 35.0 30.0 22.0 32.0 1.6 1.8 2.7 42.0 38.0 30.0 39.0 -72 - MHz MHz MHz dB dB dB dB ppm/k B1dB Pass bandwidth B3dB B30dB 35.06~40.26MHz 40.26~42.56MHz Sidelobe 45.56~48.66MHz 48.66~55.06MHz Temperature coefficient B B B TA=25℃ max MHz Characteristics of channel 2 (switching input pin 2 connected to input pin 1) Source impedance Load impedance Item Center frequency Insertion attenuation Reference level Zs=50Ω ZL=2kΩ//3pF Freq Fo min - typ 44.00 44.06MHz 13.0 15.0 17.0 dB 31.0 21.0 31.0 0.8 1.2 2.4 39.0 29.0 39.0 -72 - MHz MHz MHz dB dB dB ppm/k B1dB Pass bandwidth B3dB B30dB 35.06~42.66MHz Sidelobe 45.36~47.36MHz 47.36~55.06MHz Temperature coefficient B B B www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] TA=25℃ max MHz Page 5 of 10 SAW FILTER HDBF44A3Dc SIP5Dc 3.3 Environmental Performance Characteristics Item High temperature Low temperature Humidity Thermal shock Resistance to Soldering heat www.shoulder.cn Condition The specimen shall be store at a temperature of 80±2℃ for 96±4h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. The specimen shall be store at a temperature of -20±3℃ for 96±4h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. The specimen shall be store at a temperature of 40±2℃ with relative humidity of 90% to 96% for 96±4h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. The specimen shall be subjected to 8 continuous cycles each as shown below. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurement shall be made within 1h. Temperature Duration 1 +25 ℃=>-40 ℃ 0.5h 2 -40 ℃ 4h 3 -40 ℃=>+85 ℃ 2h 4 +85 ℃ 4h 5 +85 ℃=>+25 ℃ 0.5h 6 +25 ℃ 1h Reflow soldering method Peak: 255 ±5 ℃, 220 ±5 ℃, 40s At electrode temperature of the specimen. Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Specifications Mechanical characteristics and specifications in electrical characteristics shall be satisfied. There shall be no excessive change in appearance. Page 6 of 10 SAW FILTER Solder ability HDBF44A3Dc The specimen shall be passed through the reflow furnace with the condition shown in the above profile for 1 time. The specimen shall be stored at standard atmospheric conditions for 1h, after which the measurement shall be made. Test board shall be 1.6 mm thick. Base material shall be glass fabric base epoxy resin. Immerse the pins melt solder at 260℃+5/-0℃ More then 95% of for 5 sec. total area of the pins should be covered with solder 3.4 Mechanical Test Items Conditions Vibration 600-3300rpm amplitude 1.5mm 3 directions 2 H each Drop On maple plate from 1 m high 3 times Lead pull Pull with 1 kg force for 30 seconds Lead bend 90o bending with 500g weigh 2 times www.shoulder.cn SIP5Dc Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Specifications There shall be no damage. Page 7 of 10 SAW FILTER HDBF44A3Dc 3.5 Voltage Discharge Test Item Condition Surge Between any two electrode SIP5Dc Specifications There shall be no damage 3.6 Frequency response: Frequency response of channel 1 (switching input pin 2 connected to ground pin 1) www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 8 of 10 SAW FILTER HDBF44A3Dc SIP5Dc Frequency response of channel 2 (switching input pin 2 connected to input pin 1) www.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:[email protected] Page 9 of 10 SAW FILTER www.shoulder.cn Tel:0755-82916880 HDBF44A3Dc Fax:0755-82916881 E-mail:[email protected] SIP5Dc Page 10 of 10