Agilent HDSP-331x/332E/333x/334x Series 7.62 mm (0.3 inch) General Purpose Seven-Segment Display Data Sheet Features • Industry standard size • Industry standard pinout 7.62 mm (0.4 inch) character height DIP lead on 2.54 mm • Choice of colors High Efficiency Red (HER), Green, AlGaAs Red, and Yellow • Excellent appearance Evenly lighted segments gray package gives optimum contrast ± 50° viewing angle Description This 7.62 mm (0.3 inch) LED seven-segment display uses industry standard size package and pinout. The device is available in either common anode • Design flexibility Common anode or common cathode Single digit Left and right hand decimal point or common cathode. The choice of colors includes High Efficiency Red (HER), Green, AlGaAs Red, and Yellow. The gray face displays are suitable for indoor use. • Categorized for luminous intensity Green and yellow categorized for color Applications • Suitable for indoor use • Not recommended for industrial application, i.e., operating temperature requirements exceeding +85˚C or below –25˚C[1] • Extreme temperature cycling not recommended Note: 1. For additional details, please contact your local Agilent sales office or an authorized distributor. Devices HER HDSP-331E Green HDSP-331G AlGaAs Red HDSP-331A Yellow HDSP-331Y HDSP-332E HDSP-333E HDSP-333G HDSP-333A HDSP-333Y HDSP-334E HDSP-334G HDSP-334A HDSP-334Y Description Common Anode, Right Hand and Left Hand Decimal Common Anode, Right Hand and Left Hand Decimal without Pin 4, 5 and 12 Common Cathode, Right Hand Decimal Common Cathode, Right Hand Decimal Package Drawing A A B C Part Numbering System 5082 -X X X X-X X X X X HDSP-X X X X-X X X X X Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] A: AlGaAs Red E: High Efficiency Red G: Green Y: Yellow Device Specific Configuration[1] Refer to Respective Datasheet Package[1] Refer to Respective Datasheet Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 2 Package Dimensions Package Drawing A TOP END VIEW FRONT VIEW COUNTRY OF ORIGIN 10° COLOR BINNING (NOTE 3) PIN 1 0.50 (0.020) 19.00 (0.748) HDSP-XXXX YWW XZ COO + 7.62 (10.300) 1.00 (0.039) 2– ∅1.1 (0.043) 0.90 (0.035) 5.20 (0.205) 2.54 x 6 (0.099) LUMINOUS INTENSITY CATEGORY DATE CODE 1.50 (0.059) 6.10 (0.240) SIDE VIEW 10.10 (0.398) A F G E L.DP B C D R.DP 0.30 (0.012) 3.88 (0.153) 7.62 (0.300) NOTE: HDSP-332E DOES NOT HAVE PIN 4, 5 AND 12. 3 DIMENSIONS IN MILLIMETERS (INCHES) Package Dimensions Package Drawing B TOP END VIEW FRONT VIEW COUNTRY OF ORIGIN 10° COLOR BINNING (NOTE 3) PIN 1 0.50 (0.020) 19.00 (0.748) HDSP-XXXX YWW XZ COO + 7.62 (10.300) 1.00 (0.039) 2– ∅1.1 (0.043) 0.90 (0.035) 5.20 (0.205) 2.54 x 6 (0.099) LUMINOUS INTENSITY CATEGORY DATE CODE 1.50 (0.059) 6.10 (0.240) SIDE VIEW 10.10 (0.398) A F G E B C D R.DP 0.30 (0.012) 3.88 (0.153) 4 7.62 (0.300) DIMENSIONS IN MILLIMETERS (INCHES) Package Dimensions Package Drawing C TOP END VIEW FRONT VIEW COUNTRY OF ORIGIN 10° COLOR BINNING (NOTE 3) PIN 1 0.50 (0.020) 19.00 (0.748) HDSP-XXXX YWW XZ COO + 7.62 (10.300) 1.00 (0.039) 2– ∅1.1 (0.043) 0.90 (0.035) 5.20 (0.205) 2.54 x 6 (0.099) LUMINOUS INTENSITY CATEGORY DATE CODE 1.50 (0.059) 6.10 (0.240) SIDE VIEW 10.10 (0.398) A F G E B C D R.DP 0.30 (0.012) 3.88 (0.153) 5 7.62 (0.300) DIMENSIONS IN MILLIMETERS (INCHES) Internal Circuit Diagram Common Anode HDSP-331E/331G/331Y/331A/332E 3.14 COM L.DP 6 A 1 B 13 C 10 D 8 E 7 F 2 PIN N0. CONNECTION 1 CATHODE A G R.DP 11 9 2 CATHODE F 3 COMMON ANODE 6 CATHODE L.DP 7 CATHODE E 8 CATHODE D 9 CATHODE R.DP 10 CATHODE C 11 CATHODE G 13 CATHODE B 14 COMMON ANODE PINS 4, 5, 12: NO CONNECTION FOR HDSP-331E/331G/331Y/331A AND NO PIN FOR HDSP-332E Common Cathode HDSP-333E/333G/333Y/333A PIN NO. 4.12 COM A 14 B 13 C 8 D 7 E 6 F 1 G 2 DP 9 CONNECTION 1 ANODE F 2 ANODE G 4 COMMON CATHODE 6 ANODE E 7 ANODE D 8 ANODE C 9 ANODE DP 12 COMMON CATHODE 13 ANODE B 14 ANODE A PINS 3, 5, 10, 11: NC 6 Internal Circuit Diagram Common Cathode HDSP-334E/334G/334Y/334A 1.6 COM A 10 B 9 C 8 D 5 E 2 F 4 G 3 DP 7 PIN NO. CONNECTION 1 COMMON CATHODE 2 ANODE E 3 ANODE G 4 ANODE F 5 ANODE D 6 COMMON CATHODE 7 ANODE DP 8 ANODE C 9 ANODE B 10 ANODE A PINS 11, 12, 13, 14: NC 7 Absolute Maximum Ratings at TA = 25˚C Description Power Dissipation Segment Forward Current Segment Peak Forward Current per Segment (1/10 Duty Factor at 10 kHz) Operating Temperature Range Storage Temperature Range Reverse Voltage per Segment or DP Wave Soldering Temperature for 3 Seconds (at 2 mm Distance from the Body) HER HDSP-33xE 65 25[1] 100 Green HDSP-33xG 65 25[2] 100 AlGaAs Red HDSP-33xA 30 15[3] 80 Yellow HDSP-33xY 52 20[4] 80 Units mW mA mA –35 to +85 –35 to +85 5 250 –35 to +85 –35 to +85 5 250 –35 to +85 –35 to +85 5 250 –35 to +85 –35 to +85 5 250 ˚C ˚C V ˚C Notes: 1. Derate above 25˚C at 0.33 mA/˚C. 2. Derate above 25˚C at 0.33 mA/˚C. 3. Derate above 25˚C at 0.2 mA/˚C. 4. Derate above 25˚C at 0.27 mA/˚C. Electrical/Optical Characteristics at TA = 25˚C High Efficiency Red (HER) Devices HDSP- 331E 332E 333E 334E Parameter Luminous Intensity/Segment Symbol IV Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage VF λPEAK λd VR Parameter Luminous Intensity/Segment Forward Voltage Symbol IV VF Min. 0.8 Typ. 1.15 1.80 2.05 635 620 Max. 2.40 5 Units mcd mcd V nm nm V Test Conditions IF = 5 mA IF = 10 mA IF = 20 mA Units mcd V V nm nm V Test Conditions IF = 10 mA IF = 10 mA IF = 20 mA IR = 100 µA Green Devices HDSP- 331G 333G 334G 8 Min. 0.8 1.80 Peak Wavelength Dominant Wavelength Reverse Voltage λPEAK λd VR 5 Typ. 2.00 2.07 2.25 568 573 Max. 2.60 IR = 100 µA AlGaAs Red Devices HDSP- Parameter Luminous Intensity/Segment Symbol IV Min. 2.001 331A 333A 334A Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage VF λPEAK λd VR Parameter Luminous Intensity/Segment Symbol IV Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage VF λPEAK λd VR Typ. 3.93 4.20 1.85 660 643 Max. 2.00 5 Units mcd mcd V nm nm V Test Conditions IF = 5 mA IF = 10 mA IF = 20 mA Test Conditions IF = 5 mA IF = 10 mA IF = 20 mA IR = 100 µA Yellow Devices HDSP- Min. 0.80 331Y 333Y 334Y Typ. 0.71 1.50 Max. Units mcd mcd 2.15 595 590 2.60 V nm nm V 5 Intensity Bin Limits (mcd at 10 mA) Bin Name G H I J K HER/Green/Yellow Min.[1] Max.[1] 0.801 1.250 1.251 2.000 2.001 3.200 NA NA NA NA AlGaAs Red Min.[1] NA NA 2.001 3.201 5.051 Max.[1] NA NA 3.200 5.050 8.000 Note: 1. Tolerance for each bin limit is ± 10%. Color Bin Limits (nm at 10 mA) Color Green Yellow Bin 3 4 5 1 2 3 Dominant Wavelength (nm) Min.[1] Max.[1] 569.1 571.0 571.1 573.0 573.1 575.0 585.5 588.5 588.5 591.5 591.5 594.5 Note: 1. Tolerance for each bin limit is 1 nm. 9 IR = 100 µA IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA High Efficiency Red (HER) 30 HIGH EFFICIENCY RED (HER) 25 20 15 10 5 0 0 20 40 60 80 100 120 100 80 60 40 20 0 0 0.5 Figure 1. Maximum allowable average or DC current vs. ambient temperature. RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA) 2.0 2.5 3.0 3.5 1.4 2.0 1.5 1.0 0.5 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 3. Relative luminous intensity vs. DC forward current. 10 1.5 Figure 2. Forward current vs. forward voltage. 2.5 0 1.0 VF – FORWARD VOLTAGE – V TA – AMBIENT TEMPERATURE – °C 0 5 10 15 20 25 30 35 40 45 50 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current. IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA Green 30 GAP GREEN 25 20 15 10 5 0 0 20 40 60 80 100 TA – AMBIENT TEMPERATURE – °C 120 100 80 60 40 20 1.2 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Figure 6. Forward current vs. forward voltage. 3.0 2.5 2.0 1.5 1.0 0.5 0 5 10 15 20 25 30 35 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 7. Relative luminous intensity vs. DC forward current. 11 0 VF – FORWARD VOLTAGE – V Figure 5. Maximum allowable average or DC current vs. ambient temperature. 0 0 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 8. Relative efficiency (luminous intensity per unit current) vs. peak current. IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA AlGaAs Red 16 AIGaAs RED 14 12 10 8 6 4 2 0 0 20 40 60 80 100 120 100 80 60 40 20 0 0 0.5 TA – AMBIENT TEMPERATURE – °C Figure 9. Maximum allowable average or DC current vs. ambient temperature. RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA) 2.0 2.5 1.2 2.5 2.0 1.5 1.0 0.5 0 5 10 15 20 25 30 35 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 11. Relative luminous intensity vs. DC forward current. 12 1.5 Figure 10. Forward current vs. forward voltage. 3.0 0 1.0 VF – FORWARD VOLTAGE – V 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 12. Relative efficiency (luminous intensity per unit current) vs. peak current. 25 YELLOW 20 15 10 5 0 0 20 40 60 80 100 IF – FORWARD CURRENT PER SEGMENT – mA MAXIMUM DC CURRENT PER SEGMENT – mA Yellow 120 100 80 60 40 20 0 0 0.5 TA – AMBIENT TEMPERATURE – °C Figure 13. Maximum allowable average or DC current vs. ambient temperature. 2.0 2.5 3.0 3.5 1.4 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA) 1.5 Figure 14. Forward current vs. forward voltage. 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 IF – FORWARD CURRENT FOR SEGMENT – mA Figure 15. Relative luminous intensity vs. DC forward current. 13 1.0 VF – FORWARD VOLTAGE – V 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 16. Relative efficiency (luminous intensity per unit current) vs. peak current. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/ International), or 0120-61-1280(Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Obsoletes 5988-2971EN July 17, 2004 5988-9421EN