TECHNOLOGIES Product Data Sheet 2 WATTS REGULATED DC/DC CONVERTER HL02R TM FEATURES ● SURFACE MOUNT CONSTRUCTION ● TEMPERATURE RANGE: -25°C TO +70°C ● LOW COST ● INTERNAL FILTERING ● LOW OUTPUT NOISE ● SHORT CIRCUIT PROTECTION DESCRIPTION The HL02R Series offers an extensive selection of input and output voltage combinations to choose from. These minature, regulated DC/DC converters come in a 24 pin DIP and SMD packages. This small size is possible through the use of surface mount manufacturing technologies. oscillator in the input stage with low-drop regulators on the outputs reducing the output noise and maintaining good efficiency. The use of surface mount construction and automated manufacturing processes increase consistency and reliability while reducing overall cost. The HL02R Series utilizes a 110KHz push-pull ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation.......................................................1.5W Short Circuit Duration....................................................Continuous Lead Temperature (soldering, 10 seconds max)................+300°C HL02R xxyzz Y/Z /H * *Note: Refer to Reflow Profile for SMD Models. Device Family HL Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option Screening Option DIP Package only TYPICAL PERFORMANCE CURVES Specifications typical at T A = +25°C, nominal input voltage, rated output current unless otherwise specified. EFFICIENCY vs LOAD 100% 50% 0% 0% 25% 50% 3400 E Britannia Dr, Ste 122 HL02RrevD,10/97 75% 100% l Tucson, Arizona 85706 l Phone: 520.628.8292 l Fax: 520.770.9369 l Internet: http://www.pcc1.com Page 1 ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. NOMINAL INPUT VOLTAGE RATED OUTPUT VOLTAGE RATED OUTPUT CURRENT (VDC) (VDC) (mA) (mA) HL02R05S05 HL02R05S12 HL02R05S15 5 5 5 5 12 15 400 166 134 70 70 70 640 580 580 62 69 69 HL02R12S05 HL02R12S12 HL02R12S15 12 12 12 5 12 15 400 166 134 40 40 40 280 250 250 60 67 67 HL02R15S05 HL02R15S12 HL02R15S15 15 15 15 5 12 15 400 166 134 30 30 30 230 200 200 58 67 67 HL02R24S05 HL02R24S12 HL02R24S15 24 24 24 5 12 15 400 166 134 15 15 15 135 120 120 62 67 67 HL02R05D12 HL02R05D15 5 5 ±12 ±15 ±83 ±67 70 70 640 640 62 62 HL02R12D12 HL02R12D15 12 12 ±12 ±15 ±83 ±67 40 40 270 270 62 62 HL02R15D12 HL02R15D15 15 15 ±12 ±15 ±83 ±67 30 30 220 220 61 61 HL02R24D12 HL02R24D15 24 24 ±12 ±15 ±83 ±67 15 15 135 135 62 62 MIN TYP MAX UNITS 4.75 11.4 14.25 22.8 5 12 15 24 30 5.25 12.6 15.75 25.2 100 VDC VDC VDC VDC mAp-p MODEL INPUT CURRENT NO LOAD RATED LOAD EFFICIENCY (mA)(%) Note: Other input to output voltages may be available. Please consult factory. COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER CONDITIONS INPUT Voltage Range Reflected Ripple Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficent Ripple & Noise 5V Output - Singles Only Line Regulation Load Regulation GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217, Rev. F Ground Benign TEMPERATURE Specification Operation Storage Page 2 60 Hz, 10 Seconds 500 500 VDC Vpk GΩ pF µArms 1 25 2 VISO= 240VAC, 60Hz 2 ±0.5 ±0.02 25 10 250 ±0.5 ±0.1 BW = DC to 10MHz BW =10Hz to 2MHz High Line to Low Line Rated Load to No Load Circuit Stress Method TA = +25°C TA = +70°C -25 -40 -40 ±5 100 350 ±1.0 ±0.5 W % %/°C mVp-p mVrms mVp-p % % 110 12 kHz g 1100 20 kHr kHr +70 +85 +110 °C °C °C HL02RrevD,10/97 MECHANICAL Package/Pinout "Y" and "Z" 1.285±0.010" (32.64±0.25) 1.285±0.010" (32.64±0.25) 2423 22 0.525±0.010" (13.34±0.25) 2423 22 1514 13 0.525±0.010" (13.34±0.25) HL02RxxyzzY 1 2 3 SIDE VIEWS 0.695±0.015" (17.65±0.38) 10 11 12 0.375±0.005" (9.52±0.13) 0.015±0.005" (0.38±0.13) 0.020±0.002" (0.51±0.05) 0.100±0.010" (2.54±0.25) HL02RxxyzzZ 1 2 3 10 11 12 0.375±0.005" (9.52±0.13) 0.015±0.005" (0.38±0.13) 1514 13 TOP VIEWS 0.020±0.002" (0.51±0.05) 0.100±0.010" (2.54±0.25) END VIEWS 0.125+0.030" -0.000" (3.18+0.76) ( -0.00) 0°-15° 0.600" (15.24) 0.014±0.002" (0.36±0.05) DIP PACKAGE .015±.010" (.38±.25) SMD PACKAGE NC = No Internal Connection. NU = Do Not Use. PIN CONNECTIONS Duplicate pin functions are internally connected. PIN# All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo. RECOMMENDED LAND PATTERN SINGLES DUALS 1 2 3 +VIN NU NU +VIN -VOUT Common 10 11 12 -VOUT +VOUT -VIN Common +VOUT -VIN 13 14 15 -VIN +VOUT -VOUT -VIN +VOUT Common 22 23 24 NU NU +VIN Common -VOUT +VIN RECOMMENDED REFLOW PROFILE 30 sec MAX (>220°C) 0.100" (2.54) 250 235 °C MAX 2423 22 220 1514 13 200 0.040" (1.02) 1 2 3 10 11 12 1.150" (29.21) 190 TEMPERATURE (°C) 0.080" (2.03) 0.730" (18.54) 150 100 90 sec MAX (>190°C) 50 TIME (seconds) HL02RrevD,10/97 Page 3 Page 4 HL02RrevD,10/97