Electrical / Environmental Surface Mount Common Mode Chokes S H o R mpliant • • • • Co Operating Temperature Range Ambient Temperature, Maximum Temperature Rise, Maximum Dielectric Withstanding Voltage -40°C to +125°C 85°C 40°C 300Vdc Schematic Specifications Part HM67-B5R0LF HM67-B110LF HM67-S250LF HM67-B510LF HM67-S510LF HM67-B471LF HM67-B102(3)LF HM67-B222(3)LF HM67-B472(3)LF HM67-10510LF Notes: (1) (2) (3) (4) Inductance Leakage @100 kHz - 0.1 Vrms (1-4)(1) Typ. 5.0 ±30% 11.0 ±30% 25.0 ±30% 51.0 ±30% 51.0 ±30% 470.0 ±30% 1000.0 +50%, -30% 2200.0 +50%, -30% 4700.0 +50%, -30% 51.0 ±30%(4) 0.08 0.10 1.60 1.90 2.80 0.80 0.16 0.16 0.24 2.40(4) µH Terminals 1-4, 2-3 1-4, 2-3 1-4, 2-3 1-4, 2-3 1-4, 2-3 1-4, 2-3 1-4, 2-3 1-4, 2-3 1-4, 2-3 1-4, 2-3 Number Common Mode Inductance @100 kHz - 0.1 V (1-4 or 2-3) µH DCR (2) Max. Rated Current mA 1000 500 500 500 500 500 500 400 200 200 Ω 0.12 0.15 0.18 0.10 0.25 0.28 0.30 0.42 0.67 0.403 Marking Code A B C D E F G H I 0510 Figure 1 1 1 1 1 1 1 1 1 2 Leakage inductance is measured with pin 2 & 3 shorted. DC resistance is measured at 25°C. Maximum operating temperature is +85°C. Common mode inductance & leakage inductance of HM67-10510LF are measured at 100 kHz, 0.05V Packaging Standard: Embossed Tape & Reel Reel: Diameter: Capacity: Figure 1 & 2 Figure 1 Figure 2 = = = 13” (330.2mm) 400 Units 2000 Units Ordering Information Model Series HM67 Winding Type: B = Bifilar S /10= Sector B 110 LF TR13 TR - Tape & Reel Packing 13 - 13” reel Lead-Free Inductance Code: First 2 digits are significant. Last digit denotes the number of trailing zeros. For values below 10µH, “R” denotes the decimal point. 2007/08 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE www.bitechnologies.com We reserve the right to change specifications without prior notice 51 (Inch / mm) Outline Dimensions (Inch/mm) Figure 1 Figure 2 Bottom View Side View .024 0.60 Typ. .138 3.50 Max. .155 3.9 Max. .197 5.00 Max. Seating Plane .004/0.10MAX Side View Top View Top View .37 Max. 9.4 Marking Location .10±.004 2.5±0.1 1 4 2 3 .140 Max. 3.55 .236 Max. 6.0 .138 3.5 Max. Marking (Refer to Specifications Table) Recommended Solder Pad Layout Recommended Solder Pad Layout .090 .098 2.3 2.5 .047 1.2 .067 1.7 .177 52 .087 4.5 2.2 .40 10.2 .232 5.9 MAGNETIC COMPONENTS SELECTOR GUIDE 2007/08 EDITION We reserve the right to change specifications without prior notice. www.bitechnologies.com Electrical Characteristies @ 25°C (A) Attenuation vs. Frequency Graphs HM67-B5R0LF HM67-S250LF HM67-B110LF HM67-B510LF HM67-B110 2007/08 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE www.bitechnologies.com We reserve the right to change specifications without prior notice 53 Electrical Characteristies @ 25°C (Cont’d) HM67-S510LF HM67-B102LF HM67-B471LF HM67-B222LF HM67-B222 HM67-B472LF 54 MAGNETIC COMPONENTS SELECTOR GUIDE 2007/08 EDITION We reserve the right to change specifications without prior notice. www.bitechnologies.com Electrical Characteristies @ 25°C (Cont’d) (B) Insertion Loss vs. Frequency Graph HM67-10510LF Common Mode Insertion Loss (dB) Common Mode Differential Mode Differential Mode Frequency (MHz) (C) Current Derating Curve I o/p / I Rated HM67-10510LF Ambient Temperature (0C) 2007/08 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE www.bitechnologies.com We reserve the right to change specifications without prior notice 55