FULL PITCH MINI-FLAT PACKAGE 4-PIN OPTOCOUPLERS HMA121 Series HMA124 HMA2701 Series HMAA2705 DESCRIPTION The HMA124, HMA121 series and HMA2701 series consists of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a compact 4-pin mini-flat package. The lead pitch is 2.54 mm. The HMAA2705 consists of two gallium arsenide infrared emitting diodes, connected in inverse parallel, driving a single silicon phototransistor in a compact 4-pin mini-flat package. The lead pitch is 2.54mm. FEATURES PACKAGE DIMENSIONS • Compact 4-pin package (2.4 mm maximum standoff height) • Current Transfer Ratio in selected groups HMA121: 50–600% HMA2701: 50–300% HMA121A: 100–300% HMA2701A: 150–300% HMA121B: 50–150% HMA2701B: 80–160% HMA121C: 100–200% HMA124: 100% MIN HMA121D: 50–100% HMAA2705: 50–300% HMA121E: 150–300% HMA121F: 100–600% • Available in tape and reel quantities of 500 and 2500. • Applicable to Infrared Ray reflow (230°C max, 30 seconds.) • BSI (File #8611/8612), CSA (File #1162301), UL (File #E90700) and VDE (File #136480) certified • Creepage ≥ 5 mm, typical 5.2 mm • Clearance ≥ 5 mm, typical 5.2 mm PIN 1 0.100 (2.54) TYP 0.020 (0.51) 0.012 (0.30) 0.287 (7.29) 0.248 (6.30) 0.173 (4.40) TYP 0.169 (4.29) 0.154 (3.91) 0.094 (2.39) 0.079 (2.01) 0.008 (0.20) 0.000 (0.0) 0.035 (0.89) 0.012 (0.30) 0.033 (0.85) 0.026 (0.65) APPLICATIONS HMAA2705 • AC line monitor • Unknown polarity DC sensor • Telephone line receiver NOTE All dimensions are in inches (millimeters) HMA121 series, HMA2701 series, HMA124 • Digital logic inputs • Microprocessor inputs • Power supply monitor • Twisted pair line receiver • Telephone line receiver 1 4 COLLECTOR 2 3 EMITTER Equivalent Circuit (HMAA2705) ANODE 1 CATHODE 2 4 COLLECTOR 3 EMITTER Equivalent Circuit (HMA2701, HMA121, HMA124) © 2003 Fairchild Semiconductor Corporation Page 1 of 10 11/12/03 FULL PITCH MINI-FLAT PACKAGE 4-PIN OPTOCOUPLERS HMA121 Series HMA124 HMA2701 Series HMAA2705 ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise specified) Parameter TOTAL PACKAGE Symbol Value Units Storage Temperature TSTG -40 to +125 °C Operating Temperature TOPR -40 to +100 °C Continuous Forward Current IF (avg) 50 mA Peak Forward Current (1 µs pulse, 300 pps.) IF (pk) 1 A EMITTER Reverse Input Voltage (HMA) Power Dissipation Derate linearly (above 25°C) DETECTOR Continuous Collector Current Power Dissipation Derate linearly (above 25°C) Collector-Emitter Voltage 6 V PD 70 0.65 mW mW/°C 80 150 2.0 40 80 mA mW mW/°C 7 V PD HMA2701 Series, HMAA2705 HMA121 Series, HMA124 VCEO VECO Emitter-Collector Voltage © 2003 Fairchild Semiconductor Corporation VR Page 2 of 10 V 11/12/03 FULL PITCH MINI-FLAT PACKAGE 4-PIN OPTOCOUPLERS HMA121 Series HMA124 HMA2701 Series HMAA2705 ELECTRICAL CHARACTERISTICS (TA = 25°C) INDIVIDUAL COMPONENT CHARACTERISTICS Parameter Test Conditions EMITTER Forward Voltage Symbol (IF = 10 mA) (IF = 5 mA) VF (IF = ± 5 mA) (VR = 5 V) Reverse Current DETECTOR Breakdown Voltage Collector to Emitter Emitter to Collector Collector Dark Current Capacitance (IC = 1 mA, IF = 0) Device Min HMA121 Series HMA124 1.0 BVCEO HMA2701 Series HMA121 Series HMA124 HMA121 Series HMA124 HMA2701 Series HMAA2705 BVECO All (VCE = 40 V, IF = 0) ICEO All (VCE = 0 V, f = 1 MHz) CCE All Page 3 of 10 Unit V 1.4 HMAA2705 IR Max 1.3 HMA2701 Series (IE = 100 µA, IF = 0) © 2003 Fairchild Semiconductor Corporation Typ** 5 µA 80 V 40 7 100 10 nA pF 11/12/03 FULL PITCH MINI-FLAT PACKAGE 4-PIN OPTOCOUPLERS HMA121 Series HMA124 HMA2701 Series HMAA2705 TRANSFER CHARACTERISTICS (TA = 25°C) Characteristic Test Conditions Symbol Device Min HMAA2705 50 300 HMA2701 HMA2701A HMA2701B HMA121 HMA121A HMA121B HMA121C HMA121D HMA121E HMA121F 50 150 80 50 100 50 100 50 150 100 300 300 160 600 300 150 200 100 300 600 (IF = 1 mA, VCE = 0.4 V) HMA121F 30 (IF = 1 mA, VCE = 0.5 V) HMA124 100 (IF = ± 5 mA, VCE = 5 V) (IF = 5 mA, VCE = 5 V) DC Current Transfer Ratio CTR (IF = 5 mA, VCE = 5 V) (IF = 0.5 mA, VCE = 1.5 V) CTR Symmetry (IF = ± 5 mA, VCE = 5 V) — (IF = ± 10 mA, IC = 2 mA) HMA124 50 — HMAA2705 0.3 3.0 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 (IF = 1 mA, IC = 0.2 mA) HMA121F 0.4 (IF = 1 mA, IC = 0.5 mA) HMA124 0.4 VCE (SAT) (IF = 8 mA, IC = 2.4 mA) (IC = 2 mA, VCE = 5 V) tr (RL = 100Ω) Unit % 1200 HMA2701 HMA2701A HMA2701B HMA121 HMA121A HMA121B HMA121C HMA121D HMA121E HMA121F Saturation Voltage Fall Time (Non-Saturated) Max HMAA2705 (IF = 10 mA, IC = 2 mA) Rise Time (Non-Saturated) Typ** V 3 µs (IC = 2 mA, VCE = 5 V) tf (RL = 100Ω) 3 ISOLATION CHARACTERISTICS Characteristic Steady State Isolation Voltage Test Conditions (1 Minute) Symbol Device Min VISO All 3750 Typ** Max Unit VRMS ** All typicals at TA = 25°C © 2003 Fairchild Semiconductor Corporation Page 4 of 10 11/12/03 FULL PITCH MINI-FLAT PACKAGE 4-PIN OPTOCOUPLERS HMA121 Series HMA124 HMA2701 Series HMAA2705 TYPICAL PERFORMANCE CURVES Fig. 1 Forward Current vs. Forward Voltage Fig. 2 Collector Current vs. Forward Current 100 100 TA = 25˚C IC - COLLECTOR CURRENT (mA) IF - FORWARD CURRENT (mA) TA = 25˚C 10 1 VCE = 10V VCE = 5V 10 VCE = 0.4V 1 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1 VF - FORWARD VOLTAGE (V) 100 Fig. 4 Collector Current vs. Temperature 100 TA = 25˚C VCE = 5 V IC - COLLECTOR CURRENT (mA) IC / IF - CURRENT TRANSFER RATIO (%) Fig. 3 Current Transfer Ratio vs. Forward Current VCE = 10V VCE = 5V 100 10 IF - FORWARD CURRENT (mA) VCE = 0.4V 10 IF = 25 mA 10 IF = 10 mA IF = 5 mA IF = 1 mA 1 IF = 0.5 mA 0.1 1 10 100 -20 0 IF - FORWARD CURRENT (mA) 20 40 60 80 100 TA - AMBIENT TEMPERATURE (˚C) Fig. 5 Collector Current vs. Collector-Emitter Voltage IC - COLLECTOR CURRENT (mA) 40 TA = 25˚C IF = 50 mA IF = 40 mA 30 IF = 30 mA IF = 20 mA 20 IF = 10 mA 10 IF = 5 mA IF = 1 mA 0 0 2 4 6 8 10 VCE - COLLECTOR-EMITTER VOLTAGE (V) © 2003 Fairchild Semiconductor Corporation Page 5 of 10 11/12/03 FULL PITCH MINI-FLAT PACKAGE 4-PIN OPTOCOUPLERS HMA121 Series HMA124 HMA2701 Series Fig. 7 Collector Dark Current vs. Temperature Fig. 6 Collector Current vs. Collector-Emitter Voltage 10 ICEO - COLLECTOR DARK CURRENT (µA) 20 IC - COLLECTOR CURRENT (mA) TA = 25˚C IF = 50 mA 15 IF = 40 mA IF = 30 mA IF = 20 mA 10 IF = 10 mA IF = 5 mA 5 IF = 2 mA IF = 0.5 mA 0 0.0 0.2 0.4 0.6 IF = 1 mA 0.8 1 VCE = 48 V 0.1 VCE = 24 V 0.01 VCE = 10 V VCE = 5 V 0.001 1.0 0 20 40 60 80 100 120 TA - AMBIENT TEMPERATURE (˚C) VCE - COLLECTOR-EMITTER VOLTAGE (V) Fig. 8 Switching Time vs. Load Resistance Fig. 9 Collector-Emitter Saturation Voltage vs. Temperature 1000 VCE (sat) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) 0.24 TA = 25˚C IF = 16 mA VCC = 5 V SWITCHING TIME (µs) HMAA2705 tOFF 100 ts 10 tON 1 IF = 5 mA IC = 1mA 0.20 0.16 0.12 0.08 0.1 1 10 100 RL - RESISTANCE (kΩ) © 2003 Fairchild Semiconductor Corporation -40 -20 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (˚C) Page 6 of 10 11/12/03 FULL PITCH MINI-FLAT PACKAGE 4-PIN OPTOCOUPLERS HMA121 Series HMA124 HMA2701 Series HMAA2705 ORDERING INFORMATION Option Description V VDE Approved R1 Tape and Reel (500 units) R2 Tape and Reel (2500 units) R3 Tape and Reel (500 units; unit 180° rotated) R4 Tape and Reel (2500 units; unit 180° rotated) R1V Tape and Reel (500 units) and VDE Approved R2V Tape and Reel (2500 units) and VDE Approved R3V Tape and Reel (500 units; unit 180° rotated) and VDE Approved R4V Tape and Reel (2500 units; unit 180° rotated) and VDE Approved MARKING INFORMATION 1 121 2 V X YY M 6 3 4 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option – See order entry table) 4 One digit year code 5 Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code © 2003 Fairchild Semiconductor Corporation Page 7 of 10 11/12/03 FULL PITCH MINI-FLAT PACKAGE 4-PIN OPTOCOUPLERS HMA121 Series K0 HMA124 HMA2701 Series P2 P0 t HMAA2705 D0 E A0 W1 W B0 d F D1 P 2.54 Pitch Symbol Description Tape Width W Dimensions (mm) 12.00±0.4 Tape Thickness t 0.30±0.20 Sprocket Hole Pitch P0 4.00±0.20 Sprocket Hole Dia. D0 1.55±0.20 Sprocket Hole Location E 1.75±0.20 Pocket Location F 5.50±0.20 P2 2.00±0.20 Pocket Pitch P 8.00±0.20 Pocket Dimension A0 4.40±0.20 B0 7.30±0.20 K0 2.30±0.20 1.55±0.20 Pocket Hole Dia. D1 Cover Tape Width W1 9.20 Cover Tape Thickness d 0.065±0.02 Max. Component Rotation or Tilt Devices Per Reel Reel Diameter © 2003 Fairchild Semiconductor Corporation 20˚ max R1 500 R2 2500 R1 178 mm (7") R2 330 mm (13") Page 8 of 10 11/12/03 FULL PITCH MINI-FLAT PACKAGE 4-PIN OPTOCOUPLERS HMA121 Series HMA124 HMA2701 Series HMAA2705 Footprint Drawing for PCB Layout 0.024 (0.61) 0.060 (1.52) 0.310 (7.87) 0.190 (4.83) 0.100 (2.54) Recommended Infrared Reflow Soldering Profile Package Surface Temperature T (°C) (heating) to 30 s 230°C (peak temperature) 210°C 180°C to 60 s 150 s 90 s 60 s Time (s) • Peak reflow temperature: 230°C (package surface temperature) for 30 seconds • Time of temperature higher than 210°C: 60 seconds or less • One time soldering reflow is recommended © 2003 Fairchild Semiconductor Corporation Page 9 of 10 11/12/03 FULL PITCH MINI-FLAT PACKAGE 4-PIN OPTOCOUPLERS HMA121 Series HMA124 HMA2701 Series HMAA2705 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. © 2003 Fairchild Semiconductor Corporation 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Page 10 of 10 11/12/03