HMC353MS8 v00.0901 MICROWAVE CORPORATION GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Typical Applications Features The HMC353MS8 is ideal for: Integrated LO Amplifier w/ Pdiss: < 20 mW • BTS Infrastructure Conversion Loss / Noise Figure: 8.0 dB Low LO Drive Level: 0 dBm Input IP3: >+16 dBm Single Positive Supply: 3V to 5V Functional Diagram The HMC353MS8 is a single balanced mixer IC with an integrated LO amplifier. This converter can operate as an upconverter and downconverter between 0.8 GHz and 1.2 GHz. With the integrated LO amplifier, the mixer requires an LO drive level of only 0 dBm, and requires only 6 mA from a single positive +3V rail. The mixer has 8 dB of conversion loss, an input P1dB of +7 dBm and an input third order intercept point of +16 dBm at 1 GHz. 5 MIXERS - SMT General Description Electrical Specifications, TA = +25° C I F = 100 MHz LO= 0 dBm & Vdd= 3V Parameter Min. Typ. Units Max. Frequency Range, RF & LO 0.8 - 1.2 GHz Frequency Range, I F DC - 0.5 GHz Conversion Loss 8 11 dB Noise Figure (SSB) 8 11 dB LO to RF I s olation 9 20 - 25 dB LO to I F I s olation 4 10 dB RF to IF Isolation 10 17 dB I P 3 (Input) 10 16 dBm 1 dB Compression (I n put) -2 5 dBm 6 mA Supply Current (I d d) * Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz. 5 - 278 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] HMC353MS8 v00.0901 MICROWAVE CORPORATION GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Conversion Gain vs. Temperature @ LO = 0 dBm Isolation @ LO = 0 dBm 0 +25 C -40 C +85 C -5 RF/IF LO/RF LO/IF -5 ISOLATION (dB) -10 -10 -15 -20 -15 -25 -20 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 -30 0.7 1.5 0.8 0.9 1 FREQUENCY (GHz) Conversion Gain vs. LO Drive 1.4 1.5 -5 -10 -15 -10 -15 -20 LO RF -25 -20 0.7 5 -30 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 0 0.2 0.4 0.6 FREQUENCY (GHz) 0.8 1 1.2 1.4 1.6 1.8 2 FREQUENCY (GHz) Conversion Gain vs. Vdd @ LO = 0 dBm IF Bandwidth @ LO = 0 dBm 0 0 2.7V 3.0V 3.3V -5 -5 RESPONSE (dB) CONVERSION GAIN (dB) 1.3 0 LO = -6 dBm LO = -4 dBm LO = -2 dBm LO = 0 dBm LO = +2 dBm LO = +4 dBm -5 1.2 Return Loss @ LO = 0 dBm RETURN LOSS (dB) CONVERSION GAIN (dB) 0 1.1 FREQUENCY (GHz) MIXERS - SMT CONVERSION GAIN (dB) 0 -10 -10 -15 -15 -20 CONVERSION GAIN RETURN LOSS -20 0.7 -25 0.8 0.9 1 1.1 1.2 FREQUENCY (GHz) 1.3 1.4 1.5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 IF FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] 5 - 279 HMC353MS8 v00.0901 MICROWAVE CORPORATION GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Input P1dB vs. Temperature @ LO = 0 dBm Upconverter Performance Conversion Gain @ LO = 0 dBm 10 0 +25 C -40 C +85 C 8 -5 INPUT P1dB (dBm) CONVERSION GAIN (dB) 9 -10 -15 7 6 5 4 3 2 1 -20 0.6 5 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 0.9 FREQUENCY (GHz) 15 15 INPUT IP3 (dBm) INPUT IP3 (dBm) 20 10 0 0.8 1 1.2 1.3 1.2 1.3 10 5 -2 dBm 0 dBm +2 dBm 0.9 1.1 Input IP3 vs. Temperature @ LO = 0 dBm* 20 5 1 FREQUENCY (GHz) Input IP3 vs. LO Drive* MIXERS - SMT 0 0.8 1.6 1.1 1.2 0 0.8 1.3 +25 C -40 C +85 C 0.9 FREQUENCY (GHz) 1 1.1 FREQUENCY (GHz) Input IP3 vs. Vdd @ LO = 0 dBm* Input P1dB vs. Vdd @ LO = 0 dBm 10 20 9 +2.7V +3.0V +3.3V 8 INPUT P1dB (dBm) INPUT IP3 (dBm) 15 10 5 0 0.8 +2.7V +3.0V +3.3V 0.9 7 6 5 4 3 2 1 1 1.1 1.2 1.3 FREQUENCY (GHz) 0 0.8 0.9 1 1.1 1.2 FREQUENCY (GHz) * Two-tone input power= -10 dBm each tone, 1 MHz spacing. 5 - 280 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] 1.3 HMC353MS8 v00.0901 MICROWAVE CORPORATION GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz MxN Spurious @ IF Port Harmonics of LO nLO Spur @ RF Por t nLO mRF 0 1 2 3 4 LO Freq. (GHz) 1 2 3 4 0 XX -10 10 6 17 0.8 20 9 22 32 1 8 0 23 31 37 0.9 12 4 16 22 2 50 50 47 38 58 1 16 6 23 34 3 68 69 70 65 66 1.1 24 12 40 32 >71 1.2 30 42 22 28 1.3 20 17 23 31 4 >71 >71 >71 LO = 0 dBm All values in dBc below input LO level @ RF por t. 5 MIXERS - SMT RF = 1.0 GHz @ -10 dBm LO = 0.9 GHz @ 0 dBm All values in dBc relative to the IF. >71 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] 5 - 281 HMC353MS8 v00.0901 MICROWAVE CORPORATION GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Absolute Maximum Ratings RF / IF Input (Vdd = +3V) +13 dBm LO Drive (Vdd = +3V) +13 dBm Vdd 5.5V IF DC Current ± 4 mA Storage Temperature -65 to +150 deg C Operating Temperature -40 to +85 deg C 5 MIXERS - SMT Pin Locations & Outline Drawing 1. MATERIAL: A. PACKAGE BODY - LOW STRESS INJECTION-MOLDED PLASTIC, SILICA & SILICONE IMPREGNATED. B. LEADFRAME MATERIAL: COPPER ALLOY 2. PLATING: LEAD-TIN SOLDER PLATE 3. DIMENSIONS ARE IN INCHES (MILLIMETERS). UNLESS OTHERWISE SPECIFIED ALL TOL. ARE ±0.005 (±0.13). 5 - 282 4. CHARACTERS TO BE HELVETICA MEDIUM, APPROX. 030 HIGH, WHITE INK, LOCATED APPROXIMATELY AS SHOWN. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15 mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25 mm PER SIDE. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] HMC353MS8 v00.0901 MICROWAVE CORPORATION GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Pin Descriptions Pin Number Function Description 1 LO Por t 2, 4, 6, 7 GND Ground: Pin must connect to RF ground. 3 Vdd Power supply for the LO Amplifier. Two external RF bypass capacitor (10 pF & 10,000 pF) are required. 5 IF Por t IF Por t: This pin is DC coupled. For applications not requiring operation to DC, this por t should be DC blocked externally using a series capacitor whose values has been chosen to pass the necessar y IF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die non-function and possible die failure will result. 8 RF Por t RF Por t: This pin is AC coupled and matched to 50 ohm from 0.8 - 1.2 GHz. Interface Schematic LO Por t: This pin is AC coupled and matched to 50 ohm from 0.8 - 1.2 GHz For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] MIXERS - SMT 5 5 - 283 HMC353MS8 v00.0901 MICROWAVE CORPORATION GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz Evaluation PCB for HMC353MS8 MIXERS - SMT 5 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Evaluation Circuit Board Layout Design Details Item Description J1 - J4 PC Mount SMA RF Connector C1 10 pF Chip Capacitor, 0603 Pkg. C2 .01 µF Chip Capacitor, 0603 Pkg. L1 6.8 nH Inductor, 0805 Pkg. U1 HMC353MS8 Mixer PCB* 103928 Evaluation Board * Circuit Board Material: Rogers 4350 5 - 284 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] HMC353MS8 v00.0901 MICROWAVE CORPORATION GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 0.8 - 1.2 GHz HMC353MS8 Application Circuit MIXERS - SMT 5 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Visit us at www.hittite.com, or Email at [email protected] 5 - 285