Nel HS-A1377-FREQ Cmos compatible enable/disable Datasheet

CRYSTAL CLOCK OSCILLATORS
Data Sheet 8646A
Rev. S
CMOS Compatible Enable/Disable
HS-1370/1380 Series
Description
The HS-1370 Series of quartz crystal oscillators provide enable/disable 3-state CMOS compatible signals
for bus connected systems. Supplying Pin 1 of the HS-1370 units with a logic “0" enables the output on Pin
8. Alternately, supplying pin 1 of the HS-1380 units with a logic “1" enables its Pin 8 output. In the disabled
mode, Pin 8 presents a high impedance to the load. All units are resistance welded in an all metal package,
offering RFI shielding, and are designed to survive standard wave soldering operations without damage.
Insulated standoffs to enhance board cleaning are standard.
Features
• Wide frequency range– 0.5MHz to 36MHz
• User specified tolerance available
• Will withstand vapor phase temperatures of 253°C
for 4 minutes maximum
• Space-saving alternative to discrete component
oscillators
• High shock resistance, to 3000g
• All metal, resistance weld, hermetically sealed
package
• Low Jitter
• High Q Crystal actively tuned oscillator circuit
• Power supply decoupling internal
• No internal PLL avoids cascading PLL problems
• Low power consumption
• Gold plated leads - Solder dipped leads available
upon request
• RoHS Compliant, Lead Free Construction
(unless solder dipped leads are supplied)
Electrical Connection
Pin
Connection
1
7
8
14
Enable Input
Grd & Case
Output
VDD
Dimensions are in inches and (MM)
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: [email protected] www.nelfc.com
Data Sheet 8646A
CRYSTAL CLOCK OSCILLATORS
Rev. S
HS-1370/-1380 Series Continued
CMOS Compatible - Enable/Disable
Operating Conditions and Output Characteristics
Electrical Characteristics
Parameter
Frequency
Duty Cycle
Logic 0
Logic 1
Rise & Fall Time
Tpz
Enable/Disable
Logic High Voltage
Enable/Disable
Logic Low Voltage
Jitter, RMS(2)
Frequency Stability (1)
Symbol
--------VOL
VOH
tr,tf
-----
Conditions
----@ VDD /2
@ 600µA
@ 600µA
10-90%
-----
Min
0.5MHz
40/60%
----VDD-0.2V
---------
Typical
-------------------------
Max
36.0MHz
60/40%
0.2V
----5 ns
25 ns
-----
-----
3.0V
2.5V
-----
---------100ppm
-------------
0.4V
8 psec
+100ppm
Min
4.5V
0.0 mA
0.0 mA
0°C
-55°C
-----------------
Typical
5.0V
----------------------------2 ms
Max
5.5V
55 mA
±16.0 mA
70°C
125°C
303 mW
300°C
15pf
10 ms
--------dF/F
--------Overall conditions including:
voltage, calibration, temp.,
10 yr aging, shock, vibration
General Characteristics
Parameter
Supply Voltage
Supply Current
Output current
Operating temperature
Storage temperature
Power Dissipation
Lead temperature
Load
Start-up time
Symbol
VDD
IDD
IO
TA
TS
PD
TL
---tS
Conditions
----No Load
----------------Soldering, 10 sec.
---------
Environmental and Mechanical Characteristics
Mechanical Shock
Thermal Shock
Vibration
Soldering Condition
Hermetic Seal
Per MIL-STD-202, Method 213, Condition E
Per MIL-STD-833, Method 1011, Condition A
0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz
300°C for 10 seconds
Leak rate less than 1 x 10 -8 atm.cc/sec of helium
Footnotes:
1) Standard frequency stability (±20,±25,±50ppm & others available)
2) Jitter performance is frequency dependent. Please contact factory for full characterization.
RMS jitter bandwidth of 12kHz to 20MHz.
Test Load:
Creating a Part Number
HS - A137X - FREQ
Package Code
HS Leaded 4 pin (14 pin)
SM Leaded 4 pin (14 pin) SMD
Gull Wing
Input Voltage
Code Specification
A
3.3V
5V
Tolerance/Performance
0 ±100ppm 0-70°C
1 ±50ppm 0-70°C
7 ±25ppm 0-70°C
9 Customer Specific
A ±20ppm 0-70°C
B ±50ppm -40 to +85°C
C ±100ppm -40 to +85°C
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: [email protected] www.nelfc.com
Similar pages