HS-9008RH Data Sheet August 1999 Radiation Hardened CMOS 8-Bit Flash Analog-to-Digital Converter The Intersil HS-9008RH is a CMOS 8-Bit Flash Converter designed for space applications where relatively low power, exceptional accuracy and very fast conversion speeds are a necessity. The HS-9008RH design differs substantially from most other available Flash Converters as it employs fully differential analog input sampling networks and amplifiers, as well as regenerative, offset nulled (error correcting) comparators. These circuit techniques improve noise performance and render the circuit much less sensitive to process and radiation induced device parametric shifts. Outstanding integral and differential linearity error is achieved through the use of a metal film resistor network which exhibits >10-bit linearity without trim. As a result of these innovations, the device operates with a single fixed reference supply as opposed to the multiple, adjustable references used in similar devices. • Electrically Screened to SMD # 5962-96696 • QML Qualified per MIL-PRF-38535 Requirements • Excellent Noise Rejection - Fully Differential Design • Superior Linearity . . . . . . . . . . . . . . . . . . . . . . 0.5 LSB Typ • Single Reference Supply • Low Power . . . . . . . . . . . . . . . . . . . . . . . . . . . 330mW Typ • Sampling Rate (50ns Conversion Time). . . . . . . . . 20MHz • Total Dose Hardness . . . . . . . . . . . . . . . . . . . . . 300kRAD • Available with QML Class V or Class Q Screening Pinouts HS-9008RH (SBDIP) CDIP2-T28 TOP VIEW 1/ R 1 2 VDDD 2 Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering. HS1-9008RH-8 -55 to 125 5962F9669601QYC HS9-9008RH-8 -55 to 125 5962F9669601VXC HS1-9008RH-Q -55 to 125 5962F9669601VYC HS9-9008RH-Q -55 to 125 HS1-9008RH/Proto HS1-9008RH/Proto -55 to 125 HS9-9008RH/Proto HS0-9008RH-Q HS0-9008RH-Q 1 VDDD 4 25 VSSA VSSA 5 24 VREF + VREF - 6 23 VDDA 22 OF 21 B8 (MSB) B2 9 20 B7 B3 10 19 B6 B4 11 18 B5 CE1 12 17 VSSA CE2 13 16 VSSD VDDA 14 15 VDDD TEMP. RANGE (oC) 5962F9669601QXC HS9-9008RH/Proto 27 VIN 26 VSSD (LSB) B1 8 Ordering Information 28 VSSD CLK 3 VDDA 7 Detailed Electrical Specifications for these devices are contained in SMD 5962-96696. A “hot-link” is provided on our homepage for downloading. http://www.intersil.com/spacedefense/space.htm INTERNAL MKT. NUMBER 3279.3 Features This combination of features makes the HS-9008RH one of the best 8-Bit Flash Converters available in the Commercial, Military or Rad Hard markets. ORDERING NUMBER File Number -55 to 125 25 HS-900RH (FLATPACK) CDFP3-F28 TOP VIEW 1/ R 2 1 28 VSSD VDDD 2 27 VIN CLK 3 26 VSSD VDDD 4 25 VSSA VSSA 5 24 VREF + VREF - 6 23 VDDA VDDA 7 22 OF (LSB) B1 8 21 B8 (MSB) B2 9 20 B3 10 19 B7 B6 B4 11 18 B5 CE1 12 17 VSSA CE2 13 16 VSSD VDDA 14 15 VDDD CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999 HS-9008RH Pin Descriptions TRUTH TABLE SBDIP/ FLATPACK PACKAGE PIN NAME 8 B1 (LSB) Output Data Bits 9 B2 Output Data Bits 10 B3 Output Data Bits 11 B4 Output Data Bits 18 B5 Output Data Bits 19 B6 Output Data Bits 20 B7 Output Data Bits 21 B8 (MSB) Output Data Bits 22 OF Overflow 16, 26, 28 VSSD Digital Ground 2, 4, 15 VDDD Digital Supply 13 CE2 Three-State Output Enable 12 CE1 Three-State Output Enable 6 VREF- 27 VIN Analog Signal In 5, 17, 25 VSSA Analog Ground 3 CLK Clock Input 1 1/2 R Reference Midpoint 24 VREF+ Positive Reference Input 7, 14, 23 VDDA Analog Supply DESCRIPTION Negative Reference Input 2 CE1 CE2 B1 - B8 OF 0 1 Valid Valid 1 1 Three-State Valid X 0 Three-State Three-State HS-9008RH Functional Diagram CLOCK GENERATOR CLK 01 01 L L L L DSN cc256 01 AMPS VIN DSN 1/ R 2 (MSB) DSN cc128 DSN DSN cc1 VREF - AMPS AMPS AMPS AMPS L DYNAMIC LATCH DYNAMIC LATCH DYNAMIC LATCH DYNAMIC LATCH DYNAMIC LATCH L L OUTPUT MFFS OVERFLOW OUTPUT MFFS BIT 8 (MSB) OUTPUT MFFS BIT 7 OUTPUT MFFS BIT 6 OUTPUT MFFS BIT 5 OUTPUT MFFS BIT 4 OUTPUT MFFS BIT 3 OUTPUT MFFS BIT 2 OUTPUT MFFS BIT 1 (LSB) MFFS MFFS MFFS PLA 01 VREF+ MFFS MFFS CE1 CE2 VREF RESISTOR LADDER DIFFERENTIAL COMPARATOR ENCODER THREE-STATE OUTPUTS 3 HS-9008RH Die Characteristics DIE DIMENSIONS: ASSEMBLY RELATED INFORMATION: 180 mils x 197 mils x 21 ±1 mils Substrate Potential (Powered Up): INTERFACE MATERIALS: VDD ADDITIONAL INFORMATION: Glassivation: Type: SiO2 Thickness: 8kÅ ±1kÅ Worst Case Current Density: Metal 1 - Designs using the Intersil AVLSI-1RA process take advantage of the superior current carrying capabilities of Moly.TiW. The current density limit established by Intersil Reliability is 5.0 x 105 A/cm2 Metal 2 - 1.63 x 105 A/cm2 Top Metallization: Metal 1 - Type: Moly/TiW Thickness: 5.8kÅ ±10% Metal 2- Type: Al/Si/Cu Thickness: 10kÅ ±10% Process: Backside Finish: AVLSI1RA Silicon Metallization Mask Layout HS-9008RH VDDD2 CLK VDDD1 1/2R VSSD1 VIN VSSD2 VSSA2 VSSA1 VREF- VREF+ VDDA2 VDDA1 B1 OF B2 B8 B3 B7 B4 B6 CE1 4 CE2 VDDA3 VDDD3 VSSD3 VSSA3 B5 HS-9008RH All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (407) 724-7000 FAX: (407) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 5 ASIA Intersil (Taiwan) Ltd. 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029