ETC2 HS118 Heat shrink tubings hs100 sery Datasheet

Heat Shrink Tubings
HS100 Series
Features:
•
•
•
•
•
•
Semi-rigid, adhesive lined, polyolefin tubing
3:1 shrink ratio
Splash-resistant, moisture-resistant covering
Rugged protection against abrasion, vibration and flexing
Excellent strain relief and insulation of weak points
Operation temperature range : -55°C to 125°C
Dimension Table
Size
(Inches)
Inside Diameter
Recovered Wall Thickness
As Supplied
Maximum After
Recovery
Total Wall After
Heating
Meltable Wall After
Heating
1/8
3.2 ±0.4
1
0.95
0.35
3/16
4.8 ±0.4
1.6
1.1
0.5
1/4
6.4 ±0.4
2.2
1.2
0.6
3/8
9.5 ±0.4
3.2
1.4
0.65
1/2
12.7 ±0.8
4.2
1.5
0.75
3/4
19.1 ±0.1
6.3
2
0.9
Dimensions : Millimetres
Product Properties
Property (Units)
Test Method
Requirement
Tensile Strength (psi)
ASTM D638
1,500 min.
Elongation (%)
ASTM D638
300 min.
Cold Impact (-55°C)
ASTM D746
no cracking
AMS-DTL-23053
no cracking
ASTM D882
25,000 max.
AMS-DTL-23053
±5
Dielectric Strength (Volts / mm)
ASTM D876
1,500 min.
Volume Resistivity (Ω-cm)
ASTM D876
1 × 1014
UL224
no corrosion
ASTM D570
2 max.
-
Good
UL224
Pass
Physical
Heat Shock (250°C, 4 hrs)
Secant Modulus (psi)
Longitudinal Change (%)
Electrical
Chemical
Corrosion
Water Absorption (%)
Fluid Resistance (23°C, 24 hrs)
Flammability
www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
Page <1>
05/04/12 V1.1
Heat Shrink Tubings
HS100 Series
Part Number Table
Description
Part Number
Heat Shrink, 3:1, 3.2 mm, BLK, 10 m
HS114
Heat Shrink, 3:1, 4.8 mm, BLK, 10 m
HS115
Heat Shrink, 3:1, 6.4 mm, BLK, 10 m
HS116
Heat Shrink, 3:1, 7.9 mm, BLK, 10 m
HS117
Heat Shrink, 3:1, 9.5 mm, BLK, 10 m
HS118
Heat Shrink, 3:1, 12.7 mm, BLK, 10 m
HS119
Heat Shrink, 3:1, 15 mm, BLK, 10 m
HS120
Heat Shrink, 3:1, 19.1 mm, BLK, 10 m
HS121
Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of
it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces
all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use
made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted.
Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising)
is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Pro-POWER is the registered trademark of the Group. © Premier Farnell plc 2012.
www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
Page <2>
05/04/12 V1.1
Similar pages