Catalog 1308242 Issued 3-03 P&B KBP series 10 Amp Dual Coil Latching Relay File E29244 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data • Dual coil latching relay accepts a momentary impulse to one coil to latch and a second impulse to the other coil to release. • Enclosed in a clear polycarbonate dust cover. • AC or DC coils. • Contacts up to 5PDT. • Mounts in 11 or 20-pin octal-type plugs. Nominal Voltage DC Coils (to 5 pole) 12 24 48 110 220 Nominal Voltage Resistance in Ohms ±10% @ 25°C Nominal Current Milliamperes 52.0 230 850 4560 230 104 56.5 24 Use 110 volt relay with 5000 Ohms, 5 watt resistor in series. Resistance in Ohms ±15% @ 25°C Nominal Current Milliamperes Up to 4 Pole Relays Contact Data @ +25°C Arrangements: From 2 Form C (DPDT) to 5 Form C (5PDT), (3PDT each coil). Ratings: 10 amps @ 120VAC. Materials: 10 amp models: Silver-cadmium oxide. Expected Life: 500,000 operations, mechanical; 50,000 operations minimum at rated loads. AC Coils 24 120 240 24 120 42 1030 4100 For 5 Pole Relays 210 44 22 27 700 325 68 Operate Data @ +25°C Must-Operate Voltage: DC: 75% of nominal voltage. AC: 85% of nominal voltage. Operate Time: 25 milliseconds excluding bounce. Initial Dielectric Strength Between Open Contacts: 500V rms. Between Adjacent Contacts: 1,000V rms. Between Contacts and Coil: 1,000V rms. Environmental Data Temperature Range: Storage: 105°C. Operating: -45°C to +85°C. Coil Data @ +25°C Nominal Power: DC Coils: 2.7W. AC Coils: 5.3VA to 4 pole; 7.8VA to 5 pole. Maximum Power: DC coils - 4.0W. Duty Cycle: Intermittent. Initial Insulation Resistance: 100 megohms. Dimensions are shown for 910 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Mechanical Data Termination: See terminals table on next page. Enclosures: Plastic dust cover standard. Hermetically sealed metal case available on special order. Weight: 10.8 oz. (306g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information B Typical Part Number 1. Type: KBP = Enclosed, dual coil latching relay. KBP -11 A G -24 KB = Open, dual coil latching relay. 2. Contact Arrangement: 11 = 2 Form C (DPDT) 17 = 4 Form C (4PDT) 20 = 5 Form C (5PDT) 3. Coil Input: A = AC D = DC 4. Contact Rating: G = 10 amps @ 120VAC, 80% PF. 5. Coil Voltage: 12, 24, 48, 110VDC 24, 120, 240VAC Specify the same latch and release coil voltage for standard KBP relays. Unlike coils available on special order. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. KB-17AG-120 KB-17DG-12 KBP-11DG-110 KBP-20AG-120 KBP-11AG-120 KBP-11DG-24 Outline Dimensions 27E928 Socket Dust Cover KB-Open Style 2.205 MAX. (36.01) 1.781 MAX. TYP. (45.24) 2 HOLES .157 DIA. REF. (3.99) 1.187 REF. TYP. (30.15) 3.56 MAX. (90.4) .005 (0.127) .010 (0.254) 1.496 REF. (38.00) 1.265 (32.13) .875 REF. TYP. (22.23) .44 ± .03 (11.2 ± .8) .56 ± .03 (14.2 ± .8) 1.812 ± .015 (46.02 ± 0.38) 1.375 (34.92) .91 REF. (23.1) .165 (4.19) 2.406 MAX. (61.11) 1.25 ± .03 (31.8 ± .8) .250 (6.35) .500 (12.7) .031 REF. (0.79) .156" DIA. (4) MTG. HOLES (2 HOLES EACH FOR END OR BOTTOM MOUNTING.) .25 (6.35) 3.22 (81.79) 1.609 (40.87) Wiring Diagrams (Bottom Views) 9 11 4 5 6 7 7 8 9 10 3 2 3 8 5 6 4 1 1 11 16 18 2 7 15 17 20 19 Latch Reset KBP11 9 11 13 10 1214 3 8 5 6 4 1 13 10 1214 2 16 18 15 17 20 19 Reset Latch KBP17 Reset Latch KBP20 Note: Shown with reset coil energized last. Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. 911