HZU-L Series Silicon Planar Zener Diode for Low Noise Application REJ03G0043-0400 Rev.4.00 Oct.29.2007 Features • • • • Diode noise level of this series is approximately 1/3-1/10 lower than the HZ series. Low leakage and low zener impedance. Wide spectrum from 5.2 V through 14.3 V of zener voltage provide flexible application. Ultra small Resin Package (URP) is suitable for surface mount design. Ordering Information Part No. HZU-L Series Laser Mark Let to Mark Code Package Name URP Pin Arrangement Cathode mark Mark 1 061 2 1. Cathode 2. Anode REJ03G0043-0400 Rev.4.00 Oct 29, 2007 Page 1 of 5 Package Code PTSP0002ZA-A HZU-L Series Absolute Maximum Ratings (Ta = 25°C) Item Power dissipation Symbol Pd Junction temperature Storage temperature Tj Tstg Value 150 Unit mW 150 −55 to +150 °C °C Electrical Characteristics (Ta = 25°C) Zener Voltage Test Condition 1 VZ (V) * Type Note: HZU6A1L Min 5.2 Max 5.5 HZU6A2L HZU6A3L 5.3 5.4 5.6 5.7 HZU6B1L HZU6B2L 5.5 5.6 5.8 5.9 HZU6B3L HZU6C1L 5.7 5.8 6.0 6.1 HZU6C2L HZU6C3L 6.0 6.1 6.3 6.4 HZU7A1L HZU7A2L 6.3 6.4 6.6 6.7 HZU7A3L HZU7B1L 6.6 6.7 6.9 7.0 HZU7B2L HZU7B3L 6.9 7.0 7.2 7.3 HZU7C1L HZU7C2L 7.2 7.3 7.6 7.7 HZU7C3L HZU9A1L 7.5 7.7 7.9 8.1 HZU9A2L HZU9A3L 7.9 8.1 8.3 8.5 HZU9B1L HZU9B2L 8.3 8.5 8.7 8.9 HZU9B3L HZU9C1L 8.7 8.9 9.1 9.3 HZU9C2L HZU9C3L 9.1 9.3 9.5 9.7 HZU11A1L HZU11A2L 9.5 9.7 9.9 10.1 HZU11A3L HZU11B1L 9.9 10.2 10.3 10.6 HZU11B2L HZU11B3L 10.4 10.7 10.8 11.1 HZU11C1L HZU11C2L 10.9 11.1 11.3 11.6 HZU11C3L 11.4 11.9 1. Tested with DC. REJ03G0043-0400 Rev.4.00 Oct 29, 2007 Page 2 of 5 Reverse Current Test IR (µA) Condition Dynamic Resistance Test rd (Ω) Condition IZ (mA) 0.5 Max 1 VR (V) 2.0 Max 150 IZ (mA) 0.5 0.5 1 2.0 80 0.5 0.5 1 2.0 60 0.5 0.5 1 3.5 60 0.5 0.5 1 6.0 60 0.5 0.5 1 8.0 80 0.5 HZU-L Series (Ta = 25°C) Zener Voltage Test Condition 1 VZ (V) * Type Note: Reverse Current Test IR (µA) Condition HZU12A1L Min 11.6 12.1 12.4 HZU12A2L HZU12A3L 11.9 12.2 12.7 12.9 HZU12B1L HZU12B2L 12.4 12.6 13.1 13.4 HZU12B3L HZU12C1L 12.9 13.2 13.7 14.0 HZU12C2L HZU12C3L 13.5 13.8 14.3 12.1 IZ (mA) 0.5 Max 1 Dynamic Resistance Test rd (Ω) Condition VR (V) 10.5 Max 80 IZ (mA) 0.5 1. Tested with DC. Mark Code Part No. Mark No. Part No. Mark No. Part No. Mark No. HZU6A1L HZU6A2L 061 062 HZU9 A1L HZU9 A2L 091 092 HZU12A1L HZU12A2L 121 122 HZU6A3L HZU6B1L 063 064 HZU9 A3L HZU9 B1L 093 094 HZU12A3L HZU12B1L 123 124 HZU6B2L HZU6B3L 065 066 HZU9 B2L HZU9 B3L 095 096 HZU12B2L HZU12B3L 125 126 HZU6C1L HZU6C2L 067 068 HZU9 C1L HZU9 C2L 097 098 HZU12C1L HZU12C2L 127 128 HZU6C3L HZU7A1L 069 071 HZU9 C3L HZU11A1L 099 111 HZU12C3L 129 HZU7A2L HZU7A3L 072 073 HZU11A2L HZU11A3L 112 113 HZU7B1L HZU7B2L 074 075 HZU11B1L HZU11B2L 114 115 HZU7B3L HZU7C1L 076 077 HZU11B3L HZU11C1L 116 117 HZU7C2L HZU7C3L 078 079 HZU11C2L HZU11C3L 118 119 REJ03G0043-0400 Rev.4.00 Oct 29, 2007 Page 3 of 5 HZU-L Series HZU12C2L HZU12B2L HZU12A2L HZU11C2L HZU11B2L HZU11A2L HZU9C2L HZU9B2L HZU9A2L HZU7C2L HZU7B2L HZU6B2L HZU6C2L HZU7A2L HZU6A2L Main Characteristic 10–2 Zener Current IZ (A) 10–3 10–4 10–5 10–6 10–7 10–8 5 6 7 8 9 10 11 12 13 14 15 Zener Voltage VZ (V) Fig.1 Zener current vs. Zener voltage 0.10 50 0.04 20 mV/°C 10 0 0 −0.02 −10 −0.04 −20 −0.06 −30 −0.08 −40 −0.10 0 5 0.8mm 10 −50 15 200 0.8mm 30 Power Dissipation Pd (mW) 0.06 0.02 1.5mm 40 %/ °C Zener Voltage Temperature Coefficient γZ (mV/°C) Zener Voltage Temperature Coefficient γZ (%/°C) 0.08 250 Cu Foil 150 Printed circuit board 15 × 20 ×1.6t mm Material: Glass Epoxy Resin +Cu Foil 100 50 0 0 50 100 150 200 Zener Voltage VZ (V) Ambient Temperature Ta (°C) Fig.2 Temperature Coefficient vs. Zener voltage Fig.3 Power Dissipation vs. Ambient Temperature REJ03G0043-0400 Rev.4.00 Oct 29, 2007 Page 4 of 5 HZU-L Series Package Dimensions Package Name URP JEITA Package Code SC-76A RENESAS Code PTSP0002ZA-A Previous Code URP / URPV MASS[Typ.] 0.004g D b E HE l1 e1 A2 A1 l1 b2 Pattern of terminal position areas REJ03G0043-0400 Rev.4.00 Oct 29, 2007 Page 5 of 5 Reference Symbol A1 A2 b D E HE b2 e1 l1 Dimension in Millimeters Min 0 0.75 0.15 1.10 1.55 2.35 - Nom 0.90 0.30 1.25 1.70 2.50 0.80 2.30 0.80 Max 0.1 1.05 0.45 1.40 1.85 2.65 - Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2007. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.0