I123/I124/I323/I324 Series Leaded Oscillator, TCXO, TCVCXO Metal Package, Full Size DIP Product Features: Applications: Available in Both Clipped Sinewave and HCMOS Output Levels Compatible with Leadfree Processing Base Station IP WiMax/Wlan General Purpose Frequency I123/I323 I124/I324 9.600 Mhz to 40 Mhz 1.000 Mhz to 40 Mhz Output Level Clipped Sinewave HCMOS 1.0 V p-p Min. ‘0’=0.1 VCC Max., ‘1’=0.9Vcc Min. Output Load Clipped Sinewave HCMOS 20K Ohms / 10 pF 15pF Duty Cycle (HCMOS) 50% ±10% Rise / Fall Time (HCMOS) Frequency Stability 10 nS Max. Frequency Tolerance @ 25 C Included in Stability Tolerance 18.3 11.7 1.0 4.0 Min. 9.0 Max. See Frequency Stability Table 0.50 4.0 2.5 0.45 Aging 1 ppm / Year Max. Supply Voltage See Supply Voltage Table , tolerance 5% Current 3.0 mA Max. (Clipped Sinewave) 15.00 20.0 mA Max. (HCMOS) Voltage Control ( I321/ I322) 7.60 1.65 VDC 1.5 VDC, 5.0 ppm Min. for Vcc = 3.3 VDC 2.5 VDC 2.0 VDC, 5.0 ppm Min. for Vcc = 5.0 VDC Slope Positive Operating See Operating Temperature Table Storage -40 C to +85 C Pin 1 7 8 14 Connection Vcontrol / N.C. GND Output Vcc Dimension Units: mm Package I123 (Clipped Sinewave TCXO) I124 (HCMOS TCXO) I323 (Clipped Sinewave TCVCXO) I324 (HCMOS TCVCXO) Part Number Guide Operating Temperature Sample Part Number: I123-1Q3-20.000 Mhz FrequencyStability vs Temperature Supply Voltage 7 = 0 C to +50 C **O = 1.5 ppm 3 = 3.3 V 1 = 0 C to +70 C **P = 2.0 ppm 5 = 5.0 V 3 = -20 C to +70 C Q = 2.5 ppm 2 = -40 C to +85 C R = 3.0 ppm J = 5.0 ppm NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and GND (pin 2) to minimize power supply noise. ** Not available for all temperature ranges. ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 12/10_B Specifications subject to change without notice Page 1 Frequency - 20.000 MHz I123/I124/I323/I324 Series Leaded Oscillator, TCXO, TCVCXO Metal Package, Full Size DIP Pb Free Solder Reflow Profile: Typical Application: *Units are backward compatible with 240C reflow processes Package Information: MSL = 2a Termination = e1 (Sn / Cu / Ag over Ni over Kovar base metal). Environmental Specifications Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Marking Line 1: ILSI and Date Code Line 2: IXXX-XXX (Part Number detail = IXXX-XXX-Freq.) Line 3: Frequency ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 12/10_B Specifications subject to change without notice Page 2