IDT54/74FCT240/244T/AT/CT/DT - 2240/2244T/AT/CT, IDT54/74FCT540/541/2541T/AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVER MILITARY AND COMMERCIAL TEMPERATURE RANGES IDT54/74FCT240T/AT/CT/DT - 2240T/AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVERS IDT54/74FCT244T/AT/CT/DT - 2244T/AT/CT IDT54/74FCT540T/AT/CT IDT54/74FCT541/2541T/AT/CT Integrated Device Technology, Inc. FEATURES: DESCRIPTION: • Common features: – Low input and output leakage ≤1µA (max.) – CMOS power levels – True TTL input and output compatibility – VOH = 3.3V (typ.) – VOL = 0.3V (typ.) – Meets or exceeds JEDEC standard 18 specifications – Product available in Radiation Tolerant and Radiation Enhanced versions – Military product compliant to MIL-STD-883, Class B and DESC listed (dual marked) – Available in DIP, SOIC, SSOP, QSOP, CERPACK and LCC packages • Features for FCT240T/FCT244T/FCT540T/FCT541T: – Std., A, C and D speed grades – High drive outputs (-15mA IOH, 64mA IOL) • Features for FCT2240T/FCT2244T/FCT2541T: – Std., A and C speed grades – Resistor outputs (-15mA IOH, 12mA IOL Com.) (-12mA IOH, 12mA IOL Mil.) – Reduced system switching noise The IDT octal buffer/line drivers are built using an advanced dual metal CMOS technology. The FCT240T/FCT2240T and FCT244T/FCT2244T are designed to be employed as memory and address drivers, clock drivers and bus-oriented transmitter/receivers which provide improved board density. The FCT540T and FCT541T/FCT2541T are similar in function to the FCT240T/FCT2240T and FCT244T/FCT2244T, respectively, except that the inputs and outputs are on opposite sides of the package. This pinout arrangement makes these devices especially useful as output ports for microprocessors and as backplane drivers, allowing ease of layout and greater board density. The FCT2240T, FCT2244T and FCT2541T have balanced output drive with current limiting resistors. This offers low ground bounce, minimal undershoot and controlled output fall times-reducing the need for external series terminating resistors. FCT2xxxT parts are plug-in replacements for FCTxxxT parts. FUNCTIONAL BLOCK DIAGRAMS OE A OE B OE B OE A OE A OE B DA0 OA0 DA0 OA0 D0 O0 OB0 DB0 OB0 DB0 D1 O1 DA1 OA1 DA1 OA1 D2 O2 OB1 DB1 OB1 DB1 D3 O3 DA2 OA2 DA2 OA2 D4 O4 OB2 DB2 OB2 DB2 D5 O5 DA3 OA3 DA3 OA3 D6 O6 OB3 DB3 OB3 DB3 D7 O7 FCT240/2240T FCT540/541/2541T FCT244/2244T *Logic diagram shown for 'FCT540. 'FCT541/2541T is the non-inverting option. 2565 drw 01 2565 drw 02 2565 drw 03 The IDT logo is a registered trademark of Integrated Device Technology, Inc. MILITARY AND COMMERCIAL TEMPERATURE RANGES 1996 Integrated Device Technology, Inc. 6.8 6.8 DECEMBER 1995 DSC-2565/6 1 1 IDT54/74FCT240/244T/AT/CT/DT - 2240/2244T/AT/CT, IDT54/74FCT540/541/2541T/AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVER MILITARY AND COMMERCIAL TEMPERATURE RANGES PIN CONFIGURATIONS VCC DA0 2 3 19 OEB 18 4 17 16 OA0 DB0 OA1 15 DB1 14 6 DA3 OB3 8 GND 10 7 9 OA0 5 17 DB0 6 16 OA1 OA2 DA2 OB2 7 15 DB1 13 DB2 DA3 8 OA2 12 OA3 14 9 10 11 12 13 11 DB3 L20-2 DIP/SOIC/SSOP/QSOP/CERPACK TOP VIEW OA3 DA2 OB2 20 19 18 DB 2 5 1 4 DB 3 OB1 3 2 DA1 OB1 GND P20-1 D20-1 SO20-2 SO20-7 SO20-8 & E20-1 OB3 OB0 DA1 INDEX OEB 20 DA 0 1 OEA V CC OEA OB 0 FCT240/2240T LCC TOP VIEW 2565 drw 07 2565 drw 04 19 OEB P20-1 D20-1 SO20-2 SO20-7 SO20-8 & E20-1 4 OB1 5 DA 2 6 OB2 7 DA 3 8 OB3 GND 18 17 16 15 OA0 DB 0 3 2 OA1 DB 1 14 OA2 13 DB 2 9 12 OA3 10 11 DB 3 20 19 18 OA0 17 DB 0 16 OA1 7 15 DB 1 8 14 9 10 11 12 13 OA2 DA 1 4 OB1 5 DA 2 6 OB2 DA 3 DIP/SOIC/SSOP/QSOP/CERPACK TOP VIEW 1 L20-2 OB3 OB0 DA 1 OEB* 2 3 DB 2 DA 0 INDEX OA3 VCC OEA VCC 20 GND DB 3 1 DA 0 OEA OB0 FCT244/2244T LCC TOP VIEW 2565 drw 08 2565 drw 05 OEB D2 4 D3 D4 5 D5 7 D6 8 D7 O 0* 17 O 1* D2 4 16 O 2* O 3* D3 5 D4 6 D5 13 O 4* O 5* D6 9 12 O 6* 10 11 O 7* 6 P20-1 D20-1 SO20-2 SO20-8 & E20-1 15 14 3 2 20 19 18 O 0* 17 O 1* 16 O 2* 7 15 O 3* 8 14 9 10 11 12 13 O 4* DIP/SOIC/QSOP/CERPACK TOP VIEW 1 L20-2 D7 GND GND 18 OEB 19 D1 2 3 O 5* D0 INDEX O 6* VCC D0 20 O 7* 1 D1 OEA OEA V CC FCT540/541/2541T LCC TOP VIEW *Ox for 540, Ox for 541/2541T 2565 drw 06 6.8 2565 drw 09 2 IDT54/74FCT240/244T/AT/CT/DT - 2240/2244T/AT/CT, IDT54/74FCT540/541/2541T/AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVER MILITARY AND COMMERCIAL TEMPERATURE RANGES PIN DESCRIPTION FUNCTION TABLE Pin Names OEA, OEB Description 3–State Output Enable Inputs (Active LOW) Dxx Oxx Inputs(1) Outputs(1) 244 540 OEA OEB Inputs L L L H L H L Outputs L L H L H L H H H X Z Z Z Z 2565 tbl 01 D 240 NOTES: 1. H = High Voltage Level X = Don’t Care L = Low Voltage Level Z = High Impedance ABSOLUTE MAXIMUM RATINGS(1) 0.5 W I OUT –60 to +120 mA –60 to +120 2565 tbl 02 CAPACITANCE (TA = +25°C, f = 1.0MHz) Symbol Rating Commercial VTERM(2) Terminal Voltage –0.5 to +7.0 with Respect to GND VTERM(3) Terminal Voltage –0.5 to with Respect to VCC +0.5 GND TA Operating 0 to +70 Temperature TBIAS Temperature –55 to +125 Under Bias TSTG Storage –55 to +125 Temperature PT Power Dissipation 0.5 DC Output Current 541 Military –0.5 to +7.0 Unit V –0.5 to VCC +0.5 V –55 to +125 °C –65 to +135 °C –65 to +150 °C Symbol Parameter(1) CIN Input Capacitance COUT Output Capacitance Conditions VIN = 0V Typ. 6 VOUT = 0V 8 Max. Unit 10 pF 12 NOTE: 1. This parameter is measured at characterization but not tested. pF 2565 lnk 04 2565 lnk 03 NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. No terminal voltage may exceed VCC by +0.5V unless otherwise noted. 2. Input and VCC terminals only. 3. Outputs and I/O terminals only. 6.8 3 IDT54/74FCT240/244T/AT/CT/DT - 2240/2244T/AT/CT, IDT54/74FCT540/541/2541T/AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVER MILITARY AND COMMERCIAL TEMPERATURE RANGES DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE Following Conditions Apply Unless Otherwise Specified: Commercial: TA = 0°C to +70°C, VCC = 5.0V ± 5%; Military: TA = –55°C to +125°C, VCC = 5.0V ± 10% Symbol VIH Parameter Input HIGH Level Test Conditions(1) Guaranteed Logic HIGH Level Min. 2.0 Typ.(2) — Max. — Unit V VIL Input LOW Level Guaranteed Logic LOW Level — — 0.8 V II H Input HIGH Current(4) VCC = Max. VI = 2.7V — — ±1 µA II L Input LOW Current (4) VI = 0.5V — — ±1 I OZH High Impedance Output Current I OZL (3-State Output pins) (4) II Input HIGH Current(4) VCC = Max., VI = VCC (Max.) VIK Clamp Diode Voltage VH Input Hysteresis I CC Quiescent Power Supply Current VO = 2.7V — — ±1 VO = 0.5V — — ±1 — — ±1 VCC = Min., IIN = –18mA — –0.7 –1.2 V — — 200 — mV — 0.01 1 VCC = Max. VCC = Max., VIN = GND or VCC µA µA mA 2565 lnk 05 OUTPUT DRIVE CHARACTERISTICS FOR FCT240/244/540/541T Symbol VOH Parameter Output HIGH Voltage VOL Output LOW Voltage I OS Short Circuit Current Test Conditions(1) VCC = Min. I OH = –6mA MIL. VIN = VIH or V IL I OH = –8mA COM'L. I OH = –12mA MIL. I OH = –15mA COM'L. VCC = Min. I OL = 48mA MIL. VIN = VIH or V IL I OL = 64mA COM'L. VCC = Max., VO = GND (3) Min. 2.4 Typ.(2) 3.3 Max. — Unit V 2.0 3.0 — V — 0.3 0.55 V –60 –120 –225 mA 2565 lnk 06 OUTPUT DRIVE CHARACTERISTICS FOR FCT2240/2244/2541T Symbol I ODL Parameter Output LOW Current Test Conditions(1) VCC = 5V, VIN = VIH or VIL, VOUT = 1.5V (3) Min. 16 Typ.(2) 48 Max. — Unit mA I ODH Output HIGH Current VCC = 5V, VIN = VIH or V IL, VOUT = 1.5V (3) –16 –48 — mA VOH Output HIGH Voltage 2.4 3.3 — V VOL Output LOW Voltage VCC = Min. VIN = VIH or VIL VCC = Min. VIN = VIH or V IL — 0.3 0.50 V I OH = –12mA MIL. I OH = –15mA COM'L. I OL = 12mA NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at Vcc = 5.0V, +25°C ambient. 3. Not more than one output should be shorted at one time. Duration of the short circuit test should not exceed one second. 4. The test limit for this parameter is ±5µA at TA = –55°C. 6.8 2565 lnk 07 4 IDT54/74FCT240/244T/AT/CT/DT - 2240/2244T/AT/CT, IDT54/74FCT540/541/2541T/AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVER MILITARY AND COMMERCIAL TEMPERATURE RANGES POWER SUPPLY CHARACTERISTICS Symbol ∆ICC ICCD Parameter Quiescent Power Supply Current TTL Inputs HIGH Dynamic Power Supply Current(4) Test Conditions(1) VCC = Max. VIN = 3.4V(3) VCC = Max. Outputs Open Min. — Typ.(2) 0.5 Max. 2.0 Unit mA — 0.15 0.25 mA/ MHz FCT2xxxT — 0.06 0.12 FCTxxxT — 1.5 3.5 VIN = GND FCT2xxxT — 0.6 2.2 VIN = 3.4 — 1.8 4.5 0.9 3.2 — 3.0 6.0 (5) VIN = VCC FCTxxxT VIN = GND OEA = OEB = GND IC Total Power Supply Current (6) One Input Toggling 50% Duty Cycle VCC = Max. Outputs Open fi = 10MHz 50% Duty Cycle VIN = VCC FCTxxxT mA OEA = OEB = GND One Bit Toggling VIN = GND FCT2xxxT VCC = Max. VIN = VCC Outputs Open fi = 2.5MHz 50% Duty Cycle VIN = GND FCT2xxxT — 1.2 3.4 (5) VIN = 3.4 — 5.0 14.0 (5) — 3.2 11.4 (5) FCTxxxT FCTxxxT OEA = OEB = GND Eight Bits Toggling VIN = GND FCT2xxxT NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC = 5.0V, +25°C ambient. 3. Per TTL driven input (VIN = 3.4V). All other inputs at VCC or GND. 4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations. 5. Values for these conditions are examples of the ICC formula. These limits are guaranteed but not tested. 6. IC = IQUIESCENT + IINPUTS + IDYNAMIC IC = ICC + ∆ICC DHNT + ICCD (fCP/2 + fiNi) ICC = Quiescent Current ∆ICC = Power Supply Current for a TTL High Input (VIN = 3.4V) DH = Duty Cycle for TTL Inputs High NT = Number of TTL Inputs at DH ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL) fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices) fi = Input Frequency Ni = Number of Inputs at fi All currents are in milliamps and all frequencies are in megahertz. 6.8 2565 tbl 08 5 IDT54/74FCT240/244T/AT/CT/DT - 2240/2244T/AT/CT, IDT54/74FCT540/541/2541T/AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVER MILITARY AND COMMERCIAL TEMPERATURE RANGES SWITCHING CHARACTERISTICS OVER OPERATING RANGE FOR FCT240/2240T FCT240T FCT2240T Com'l. Symbol tPLH tPHL tPZH tPZL tPHZ tPLZ Parameter Propagation Delay DN to ON Output Enable Time FCT240AT FCT2240AT Mil. Com'l. Mil. Condition(1) Min.(2) Max. Min.(2) Max. Min.(2) Max. Min.(2) Max. Unit CL = 50pF RL = 500Ω 1.5 8.0 1.5 9.0 1.5 4.8 1.5 5.1 ns 1.5 10.0 1.5 10.5 1.5 6.2 1.5 6.5 ns 1.5 9.5 1.5 10.0 1.5 5.6 1.5 5.9 ns Output Disable Time 2565 tbl 09 FCT240CT FCT2240CT Com'l. Symbol tPLH tPHL tPZH tPZL tPHZ tPLZ Parameter Propagation Delay DN to ON Output Enable Time Condition(1) Min.(2) CL = 50pF RL = 500Ω 1.5 Output Disable Time FCT240DT Mil. Max. Min.(2) 4.3 1.5 1.5 5.8 1.5 5.2 Com'l. Max. Min.(2) 4.7 1.5 1.5 6.5 1.5 5.7 Mil. Max. Min.(2) Max. Unit 3.6 — — ns 1.5 4.8 — — ns 1.5 4.0 — — ns 2565 tbl 10 SWITCHING CHARACTERISTICS OVER OPERATING RANGE FOR FCT244/2244T FCT244T FCT2244T Com'l. Symbol tPLH tPHL tPZH tPZL tPHZ tPLZ Parameter Propagation Delay DN to ON Output Enable Time Condition(1) Min.(2) CL = 50pF RL = 500Ω 1.5 Output Disable Time FCT244AT FCT2244AT Mil. Max. Min.(2) 6.5 1.5 1.5 8.0 1.5 7.0 Com'l. Max. Min.(2) 7.0 1.5 1.5 8.5 1.5 7.5 Mil. Max. Min.(2) Max. Unit 4.8 1.5 5.1 ns 1.5 6.2 1.5 6.5 ns 1.5 5.6 1.5 5.9 ns 2565 tbl 11 FCT244CT FCT2244CT Com'l. Symbol tPLH tPHL tPZH tPZL tPHZ tPLZ Parameter Propagation Delay DN to ON Output Enable Time FCT244DT Mil. Com'l. Mil. Condition(1) Min.(2) Max. Min.(2) Max. Min.(2) Max. Min.(2) Max. Unit CL = 50pF RL = 500Ω 1.5 4.1 1.5 4.6 1.5 3.6 — — ns 1.5 5.8 1.5 6.5 1.5 4.8 — — ns 1.5 5.2 1.5 5.7 1.5 4.0 — — ns Output Disable Time 2565 tbl 12 NOTES: 1. See test circuit and waveforms. 2. Minimum limits are guaranteed but not tested on Propagation Delays. 6.8 6 IDT54/74FCT240/244T/AT/CT/DT - 2240/2244T/AT/CT, IDT54/74FCT540/541/2541T/AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVER MILITARY AND COMMERCIAL TEMPERATURE RANGES SWITCHING CHARACTERISTICS OVER OPERATING RANGE FOR FCT540/541/2541T FCT540T/541T FCT2541T Com'l. Symbol tPLH tPHL tPLH tPHL tPZH tPZL tPHZ tPLZ Parameter Condition(1) Propagation Delay DN to ON FCT540 Propagation Delay DN to ON FCT541/2541T Output Enable Time CL = 50pF RL = 500Ω Output Disable Time FCT540AT/541AT FCT2541AT Mil. Com'l. Mil. FCT540CT/541CT FCT2541CT Com'l. Mil. Min.(2) Max. Min.(2) Max. Min.(2) Max. Min.(2) Max. Min.(2) Max. Min.(2) Max. Unit 1.5 8.5 1.5 9.5 1.5 4.8 1.5 5.1 1.5 4.3 1.5 4.7 ns 1.5 8.0 1.5 9.0 1.5 4.8 1.5 5.1 1.5 4.1 1.5 4.6 ns 1.5 10.0 1.5 10.5 1.5 6.2 1.5 6.5 1.5 5.8 1.5 6.5 ns 1.5 1.5 10.0 1.5 5.6 1.5 5.9 1.5 5.2 1.5 5.7 ns 9.5 2565 tbl 13 NOTES: 1. See test circuit and waveforms. 2. Minimum limits are guaranteed but not tested on Propagation Delays. 6.8 7 IDT54/74FCT240/244T/AT/CT/DT - 2240/2244T/AT/CT, IDT54/74FCT540/541/2541T/AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVER MILITARY AND COMMERCIAL TEMPERATURE RANGES TEST CIRCUITS AND WAVEFORMS TEST CIRCUITS FOR ALL OUTPUTS SWITCH POSITION V CC 500Ω Switch Open Drain Disable Low Closed Enable Low V OUT VIN Pulse Generator Test 7.0V Open All Other Tests D.U.T. 50pF RT 2565 drw 14 DEFINITIONS: CL= Load capacitance: includes jig and probe capacitance. RT = Termination resistance: should be equal to ZOUT of the Pulse Generator. 500Ω CL 2565 drw 10 SET-UP, HOLD AND RELEASE TIMES DATA INPUT tH tSU TIMING INPUT ASYNCHRONOUS CONTROL PRESET CLEAR ETC. SYNCHRONOUS CONTROL PRESET CLEAR CLOCK ENABLE ETC. tREM tSU PULSE WIDTH 3V 1.5V 0V 3V 1.5V 0V LOW-HIGH-LOW PULSE 1.5V tW 3V 1.5V 0V HIGH-LOW-HIGH PULSE 1.5V 2565 drw 12 3V 1.5V 0V tH 2565 drw 11 PROPAGATION DELAY ENABLE AND DISABLE TIMES ENABLE SAME PHASE INPUT TRANSITION tPLH tPHL OUTPUT tPLH OPPOSITE PHASE INPUT TRANSITION tPHL 3V 1.5V 0V VOH 1.5V VOL DISABLE 3V CONTROL INPUT 1.5V OUTPUT NORMALLY LOW 3V 1.5V 0V 2565 drw 13 SWITCH CLOSED 3.5V 1.5V tPZH OUTPUT NORMALLY HIGH SWITCH OPEN 0V tPLZ tPZL 3.5V 0.3V VOL tPHZ 0.3V VOH 1.5V 0V 0V 2565 drw 14 NOTES: 1. Diagram shown for input Control Enable-LOW and input Control DisableHIGH 2. Pulse Generator for All Pulses: Rate ≤ 1.0MHz; tF ≤ 2.5ns; tR ≤ 2.5ns 6.8 8 IDT54/74FCT240/244T/AT/CT/DT - 2240/2244T/AT/CT, IDT54/74FCT540/541/2541T/AT/CT FAST CMOS OCTAL BUFFER/LINE DRIVER MILITARY AND COMMERCIAL TEMPERATURE RANGES ORDERING INFORMATION IDT XX Temp. Range FCT X XXXX X Family Device Type Package X Process Blank B Commercial MIL-STD-883, Class B P D SO L E PY Q Plastic DIP CERDIP Small Outline IC Leadless Chip Carrier CERPACK Shrink Small Outline Package Quarter-size Small Outline Package 240T 244T 540T 541T 240AT 244AT 540AT 541AT 240CT 244CT 540CT 541CT 240DT 244DT Inverting Octal Buffer/Line Driver Non-Inverting Octal Buffer/Line Driver Non-Inverting Octal Buffer/Line Driver Inverting Octal Buffer/Line Driver Non-Inverting Octal Buffer/Line Driver Blank 2 High Drive Balanced Drive 54 74 –55°C to +125°C 0°C to +70°C 2565 drw 15 6.8 9