DIVISION OF DELTROL CORP. 105 105 FEATURES MODELS ■ ■ ■ 105: 105A: Class F Coil Insulation System for 155°C Total Temperature Coil Molded in DuPont Rynite® for Environmental Protection Unique Armature Stop Maintains Adjustment 105G: 105T: CONTACT DATA CONFIGURATION: Thru 3PDT MATERIALS: 5 AMP: 1/8" Diameter Moveable Fine Silver 3/16" Diameter Stationary Fine Silver 10 AMP: 3/16" Diameter Moveable Silver Cadmium Oxide 3/16" Diameter Stationary Fine Silver Gold Flash is Standard on All Contacts Gold Diffused Available on Special Order – Min. Qty. Req’d. CONTACT RATINGS MOVEABLE POLE CONTACT SIZE CONFIGURATION 1/8" Diameter thru 3PDT 3/16" Diameter thru DPDT 3/16" Diameter 3PDT UL RATINGS 5 amp or 1/8 HP at 120VAC 5 amp or 1/4 HP at 277VAC 5 amp at 28VDC 10 amp or 1/3 HP at 120VAC 10 amp or 1/2 HP at 277VAC 10 amp at 28VDC 6.6 amp at 120VAC UL RECOGNIZED FILE NO.: E37066 CSA CERTIFIED FILE NO.: LR20690 Not Applicable to 105T EXPECTED LIFE Electrical At Rated Load (Minimum) 100,000 Operations Mechanical Life 10,000,000 Operations SPDT DPDT 3PDT RESISTANCE IN OHMS ± 10% 1K 2.5K 5K 10K 1K 2.5K 5K 10K 1K 2.5K 5K 10K NOMINAL VOLTAGE AC Coils Single Pole Units AC Coils 2&3 Pole Units DC Coils 1-3 Pole Units 6VAC 12VAC 24VAC 48VAC 120VAC 240VAC 6VAC 12VAC 24VAC 48VAC 120VAC 240VAC 6VDC 12VDC 24VDC 48VDC 110VDC RESISTANCE IN OHMS ± 10% 5.0 20 80 315 2025 8000 4.5 18 72 285 1850 7200 30 120 480 1850 10,000 NOMINAL COIL POWER 2.0VA 2.2VA 1.2W Coil Voltages: AC: Up to 277 Volts/60 Hz DC: Up to 125 Volts Coil Treatment: Molded Rynite® Std. Class F Insulation Resistance: 100 Megohms Minimum UL Insulation System File No.: E74443 S155D 155°C Total Temperature Std. (Covers S105 Class A and S130D Class B Requirements) ENVIRONMENTAL DATA 105T SENSITIVE RELAY 5 AMP RATING ONLY DC PULL-IN CURRENT 11.2MA 7.2MA 5MA 3.6MA 16MA 10MA 7.2MA 5MA 19.5MA 12.3MA 8.7MA 6.1MA COIL DATA – ALL VERSIONS EXCEPT SENSITIVE COIL 105T Pick Up (at 25°C): AC Volts 85% or Less of Nominal DC Volts 75% or Less of Nominal Operate Time: Approx. 15 Milliseconds Release Time: Approx. 15 Milliseconds 800 VRMS, 60 Hz Between Contacts 1500 VRMS, 60 Hz Between Other Elements CONTACT CONFIG. Standard 8 or 11 Pin Socket Termination Addition of Indicator Lamp – Indicates Voltage to the Coil (48V Not Available) Uses Std. Cover With Neoprene Gasket Sensitive Coil Version of 105 Uses 125MW Per Pole OPERATE DATA DIELECTRIC STRENGTH 8 SERIES RELAY 5 AND 10 AMP GENERAL PURPOSE PLUG-IN – OCTAL BASE NOMINAL COIL POWER Operating Ambient: AC: -45° to 55°C DC: -45° to 70°C Coil Temperature Rise: (25°C Ambient – Continuous Duty) AC: 45°C Approx. @ 60 Hz – Use at 50 Hz will Cause Slight Increase in Coil Rise DC: 25°C Approx. 125MW MECHANICAL DATA 250MW 375MW Terminals: 8 or 11 Pin-Plug Cover: Polycarbonate – Flammability Rating 94V2 Weight: All Versions Approx. 3.0 oz. (85 g) DIMENSIONS [Unit Inch (mm)] 2.00 (50.80) SCHEMATICS .56 (14.22) SPDT 3PDT 1.38 (35.05) DPDT 1.38 (35.05) 105/105T ORDERING INFORMATION 5 AMP Part Numbers Model Pole Configuration SPDT 105 DPDT 3PDT 10 AMP Part Numbers SPDT 105 DPDT 3PDT SPDT 105A DPDT 3PDT AC Coils 24VAC 20105-82 20107-82 20109-82 20106-82* 20108-82* 20110-82* 20816-82 20117-82* 20118-82 120VAC 20105-84 20107-84* 20109-84 240VAC 20105-85 20107-85 20109-85 12VDC 20111-81 20113-81 20115-81 DC Coils 24VDC 20111-82 20113-82 20115-82 110VDC 20111-84 20113-84 20115-84 20106-84* 20108-84* 20110-84* 20816-83 20117-84* 20118-84* 20106-85 20108-85 20110-85* 20816-84 20117-85* 20118-85 20112-81 20114-81* 20116-81* 20992-81 20119-81 20120-81 20112-82 20114-82* 20116-82* 20992-82 20119-82 20120-82 20112-84 20114-84* 20116-84* 20992-84 20119-84 20120-84 5KΩ 20160-82 20161-82 20162-82 10KΩ 20160-83 20161-83 20162-83 Sensitive Relay Part Numbers Model 105T Pole Configuration SPDT DPDT 3PDT DC Resistance 1KΩ 2.5KΩ 20160-80 20160-81 20161-80 20161-81 20162-80 20162-81 * Black Items Are Normally Stocked. Blue Items Are Non Stock. Minimum Quantity May Be Required. SOCKETS Figure 1 Figure 2 105 Accessory Configuration Rating Part Numbers Reference Socket – 8 Pin Octal DPDT 10 Amps @ 300VAC 20983-81* Figure 1 Socket – 11 Pin Octal 3PDT 10 Amps @ 300VAC 20983-82* Figure 2 See Page 30 for Dimensions and Specifications 9