TECHNICAL DATA IL91214A/B Tone/Pulse Dialer with Flash Function IL91214A and IL91214B are tone/pulse dialers designed for providing standard DTMF or pulse signals. The ICs enable to: - generate standard DTMF or pulse signals of dialing as well as “flash” pulses; - store and redial last number; - generate pause in the transmitted package of dial signals; ICs are designed to be used in telephone sets. D SUFFIX SOIC ORDERING INFORMATION IL91214A/BN Plastic IL91214A/BD SOIC TA = -20° to 70° C for all packages R1 DP KEYBOARD LOGIC R4 REDIAL MEMORY 32 DIGITS C1 OUTPUT LOGIC KT XMIT MUTE C3 MODE OUT VDD DTMF GENERATOR TONE MODE IN HK INPUT LOGIC CONTROL LOGIC Fig. 1. Block diagram. OSC. OSCI OSCO IL91214 A, IL91214B PIN DESCRIPITION Pin # 01 16 R4 M O D E IN 02 15 R3 14 R2 13 R1 12 C3 11 C2 TO NE 07 10 C1 08 09 DP O SCI 03 O SCO 04 Vss 05 Vdd 06 X M IT M U T E IL91214A HK 18 R4 MODE IN 02 17 R3 OSCI 03 16 R2 15 R1 14 C3 13 C2 12 C1 08 11 DP MODE OUT 09 10 KT OSCO 04 Vss 05 Vdd 06 TONE 07 XMIT MUTE IL91214B HK 01 A B 1 2 1 2 Designation HK MODE IN 3 4 5 6 7 8 3 4 5 6 7 8 9 10 11 12 13 14 15 16 9 10 11 12 13 14 15 16 17 18 OSCI OSCO VSS VDD TONE XMIT MUTE MODE OUT KT DP C1 C2 C3 R1 R2 R3 R4 Description Hook switch input MODE IN = VDD: pulse mode, 10 Hz, М/В = 1/2, MODE IN = VSS: tone mode, MODE IN = floating mode, 20 Hz, М/В = 1/2 Oscillator input Oscillator output Ground Supply output Tone dialing output Dialing transmission mute output Mode output pin Key-in tone output Dialing pulse output Keyboard column input Keyboard column input Keyboard column input Keyboard row input Keyboard row input Keyboard row input Keyboard row input Keyboard Assignment 1 2 3 F1 4 5 6 F2 7 8 9 P R3 */T 0 # RD R4 C1 C2 C3 C4 R1 R2 1. */T – At Pulse mode this key works as Pulse -> DTMF key (T key), at DTMF mode the key works as *key. */T key will occupy one memory digit in either use. 2. F1 – Flash key. The break time is 297ms 3. F2 – Flash key for break time 640ms 4. P – Pause key (2.2 seconds) 5. RD – One key redial key 6. # - At pulse mode this key input is neglected, at DTMF mode this key works as # key. IL91214 A, IL91214B IL91214 A, IL91214B DC electrical characteristics (VDD = 3.5 V, VSS = 0 V, FOSC = 3.579 МHz, T = 25OC, unless otherwise specified) Parameter Symbol Supply voltage, V VDD Memory retention voltage, V Memory retention current, uА VMR Min. 2.0 Typ 2.0 1 Max. 5.5 Condition Pulse mode 5.5 Tone mode * IMR 0.05 0.4 Operation current, мА IDDP IDDT 0.32 0.6 1.0 2.0 Standby current, uА * ISO 0.03 0.05 0.5 10 VDD 0.2 VDD Input voltage, V Input current R1-R4, uА Tone out voltage, мV VIH VIL 0.8 VDD 0 VDD = 3.5 V 115 IR VOC VOR VDD = 1.0 V HK = VDD All outputs unloaded Pulse Tone HK=VD All outputs unloaded. No key selected. D НК=VSS VDD=1.5V 584 456 Sink current 0.9 IOL1 XMUTE, мА Sink current 1.1 IOL2 DP, мА Distortion, % DIS % * - in this mode IC functioning is not guaranteed. 730 570 876 684 Column Row VDD=3.5V RL=5К 5.3 VDD=3.5V, VOL=0.4V 5.3 VDD=3.5V, VOL=0.4V 1 5 IL91214 A, IL91214B AC characteristics (VDD = 3.5 V, VSS = 0 V, FOSC = 3.579 МHz, T = 25OC, unless otherwise specified) Parameter Symbol Make time, мs TM Break time, мs ТВ Min. Typ 33.3 Inter-digit pause time, мs TIDP Pause time, s Auto-redial break time, s TPAU TAOBK 16.7 66.6 33.3 824 458 2.2 2.2 TD 0 TKD TKTD FKT TMFD TTIDP TMFDR TTIDPR 21 23 437 94 96 94 96 Delay time key valid to signal out, мs Key-in debounce, мs Key-in tone duration, мs Key-in tone frequency, Hz Minimal tone duration time, мs Minimum tone inter-digit pause, мs Redial tone duration, мs Redial tone inter-digit duration, мs Max. Condition Dialing speed, pps 10 M/B=1/2 20 10 20 M/B=1/2 M/B=1/2 M/B=1/2 10 pps 20 pps Values of generated frequencies R/C Frequency Error, % Unit R1 697 + 0.31 Hz R2 770 + 0.19 Hz R3 852 + 0.03 Hz R4 941 + 0.10 Hz С1 1.209 + 0.57 Hz С2 1.336 - 0.32 Hz С3 1.477 - 0.35 Hz Conditions FOSC = 3.579 МHz Absolute maximum ratings Parameter Supply voltage Input voltage Output voltage Output voltage (DP, XMIT MUTE). Tone output current Power dissipation Storage temperature VDD VIN VOUT VOUT Absolute maximum value ≤ 6.0V VSS-0.3V ~ VDD+0.3V VSS-0.3V ~ VDD+0.3V ≤1.2V ITONE PD TSTG ≤ 50 мА ≤ 500 мW -40ОС ~ +125ОС IL91214 A, IL91214B 1. Pulse dialing mode. HK Key input 2 1 3 TKD : debouncing time 21 мs КТ TKTD (23 мs), f = 437 Hz XMIT MUTE TD TIDP DP 21 мs TM TM TM TB 2. Tone dialing mode. HK Key input 4 КТ 3 * 9 TKD XMIT MUTE TD 2.3 мs TMFD 2.5 мs 2.3 мs TONE TTIDP MODE OUT 3. Redialing. HK Key input RD КТ XMIT MUTE TD TMFDR TONE TTIDPR MODE OUT 2.5 мs 2.3 мs IL91214 A, IL91214B 4. Switching mode operation (MODE IN control). HK Key input 2 3 */T 6 4 MODE IN КТ DP TM TIDP TM MODE OUT TIDP TD XMIT MUTE TPAU TMFD TONE 5. Switching mode operation (*/T key entry). HK Key input 2 3 */T 6 4 MODE IN КТ DP TM TIDP TM MODE OUT XMIT MUTE TD TIDP TPAU TMFD 2.5 мс TONE 2.5 мс IL91214 A, IL91214B 6. One key redial using RD key (DTMF mode for example). HK Key input 2 RD 3 XMIT MUTE DP TAOBK TD TD 2.5 мs 2.5 мs TONE MODE OUT 7. Flash dialing HK Key input F 6 4 3 XMIT MUTE TFSH DP MODE OUT TPAU TONE 2.5 мс 2.5 мs IL91214A/B IL91214 A, IL91214B IL91214 A, IL91214B N SUFFIX PLASTIC DIP (MS - 001BB) A Dimension, mm 9 16 B 1 8 Symbol MIN MAX A 18.67 19.69 B 6.1 7.11 5.33 C F L C -T- SEATING PLANE N G K D M H J 0.25 (0.010) M T NOTES: 1. Dimensions “A”, “B” do not include mold flash or protrusions. Maximum mold flash or protrusions 0.25 mm (0.010) per side. D 0.36 0.56 F 1.14 1.78 G 2.54 H 7.62 J 0° 10° K 2.92 3.81 L 7.62 8.26 M 0.2 0.36 N 0.38 D SUFFIX SOIC (MS - 012AC) Dimension, mm A 16 9 H B 1 G P 8 R x 45 C -TK D SEATING PLANE J 0.25 (0.010) M T C M F M Symbol MIN MAX A 9.8 10 B 3.8 4 C 1.35 1.75 D 0.33 0.51 F 0.4 1.27 G 1.27 H 5.72 J 0° 8° K 0.1 0.25 1. Dimensions A and B do not include mold flash or protrusion. M 0.19 0.25 2. Maximum mold flash or protrusion 0.15 mm (0.006) per side for A; for B ‑ 0.25 mm (0.010) per side. P 5.8 6.2 R 0.25 0.5 NOTES: IL91214 A, IL91214B N SUFFIX PLASTIC DIP (MS - 001AC) A Dimension, mm 18 10 B 1 9 Symbol MIN MAX A 22.35 23.37 B 6.1 7.11 5.33 C F L C -T- SEATING PLANE N G M K H D J 0.25 (0.010) M T NOTES: 1. Dimensions “A”, “B” do not include mold flash or protrusions. Maximum mold flash or protrusions 0.25 mm (0.010) per side. D 0.36 0.56 F 1.14 1.78 G 2.54 H 7.62 J 0° 10° K 2.92 3.81 L 7.62 8.26 M 0.2 0.36 N 0.38 D SUFFIX SOIC (MS - 013AD) A 18 Dimension, mm 10 H B 1 G 9 R x 45 C -TK D SEATING PLANE J 0.25 (0.010) M T C M F M Symbol MIN MAX A 10.1 10.5 B 7.4 7.6 C 2.35 2.65 D 0.33 0.51 F 0.4 1.27 1.27 G H J 0° 8° 1. Dimensions A and B do not include mold flash or protrusion. K 0.1 0.3 2. Maximum mold flash or protrusion 0.15 mm (0.006) per side M 0.23 0.32 P 10 10.65 R 0.25 0.75 NOTES: for A; for B ‑ 0.25 mm (0.010) per side.