ILC-0402 www.vishay.com Vishay Dale Surface Mount, Multi Layer High Frequency Ceramic Inductors FEATURES • High reliability • Surface mountable • Reflow or wave solderable MECHANICAL SPECIFICATIONS • Tape and reel packaging per EIA specifications: 10 000 pieces on 7" reel Solderability: 95 % coverage after 4 s ± 1 s dip in 245 °C ± 5 °C solder following 60 s preheat at 150 °C and type R flux dip • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Resistance to Solder Heat: 10 s ± 1 s in 260 °C ± 5 °C solder, after preheat and flux above ENVIRONMENTAL SPECIFICATIONS Terminal Strength: 0.5 kg for 60 s ± 1 s Operating Temperature: -40 °C to +105 °C Thermal Shock: 500 cycles, -40 °C to +105 °C Flex: 0.8 mm min. mounted on 0.8 mm thick PC board Humidity: +85 °C, 85 % RH, 1000 h at full rated current Load Life: 105 °C for 1000 h at full rated current STANDARD ELECTRICAL SPECIFICATIONS PART NUMBER IND. (nH) TOL. TEST FREQUENCY (MHz) MIN. ILC0402ER1N0S 1.0 0.3 nH 100 8 11 34 52 10 000 ILC0402ER1N2S 1.2 0.3 nH 100 8 11 35 52 ILC0402ER1N5S 1.5 0.3 nH 100 8 11 33 48 ILC0402ER1N8S 1.8 0.3 nH 100 8 11 30 ILC0402ER2N2S 2.2 0.3 nH 100 8 10 ILC0402ER2N7S 2.7 0.3 nH 100 8 10 ILC0402ER3N3S 3.3 0.3 nH 100 8 ILC0402ER3N9S 3.9 0.3 nH 100 ILC0402ER4N7S 4.7 0.3 nH 100 ILC0402ER5N6S 5.6 0.3 nH 100 8 10 24 35 4000 5700 0.23 300 ILC0402ER6N8J 6.8 5% 100 8 10 23 32 3900 5500 0.25 300 ILC0402ER8N2J 8.2 5% 100 8 10 23 31 3600 4900 0.28 300 ILC0402ER10NJ 10 5% 100 8 10 23 31 3200 4300 0.31 300 ILC0402ER12NJ 12 5% 100 8 11 23 31 2700 3900 0.40 300 ILC0402ER15NJ 15 5% 100 8 11 23 30 2300 3500 0.46 300 ILC0402ER18NJ 18 5% 100 8 11 23 30 2100 3100 0.55 300 ILC0402ER22NJ 22 5% 100 8 11 22 27 1900 2800 0.60 300 ILC0402ER27NJ 27 5% 100 8 11 21 26 1600 2300 0.70 300 ILC0402ER33NJ 33 5% 100 8 11 20 22 1300 1900 0.80 200 ILC0402ER39NJ 39 5% 100 8 11 20 21 1200 1700 0.90 200 ILC0402ER47NJ 47 5% 100 8 11 19 18 1000 1500 1.00 200 ILC0402ER56NJ 56 5% 100 8 11 18 16 750 1300 1.00 200 ILC0402ER68NJ 68 5% 100 8 11 17 11 750 1200 1.20 180 ILC0402ER82NJ 82 5% 100 8 10 16 6 600 1100 1.30 150 ILC0402ERR10J 100 5% 100 8 10 14 - 600 1000 1.50 150 ILC0402ERR12J 120 5% 100 8 10 10 - 600 950 1.60 150 ILC0402ERR15J 150 5% 100 8 12 17 - 550 920 3.20 140 ILC0402ERR18J 180 5% 100 8 12 - - 500 810 3.70 130 ILC0402ERR22J 220 5% 100 8 12 - - 450 700 4.20 120 ILC0402ERR27J 270 5% 100 8 12 - - 400 600 4.80 110 Revision: 18-Sep-17 Q TYPICAL Q MIN. 100 MHz 500 MHz 1000 MHz SRF (MHz) TYP. DCR MAX. () RATED DC CURRENT MAX. (mA) > 13 000 0.08 300 10 000 > 13 000 0.09 300 6000 > 13 000 0.10 300 42 6000 11 000 0.12 300 25 36 6000 10 000 0.13 300 24 34 6000 9000 0.13 300 10 24 35 6000 8000 0.16 300 8 10 24 35 4000 7000 0.21 300 8 10 24 34 4000 6000 0.21 300 Document Number: 34120 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILC-0402 www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] Ceramic Body 0.02 ± 0.002 [0.5 ± 0.05] 0.02 ± 0.002 [0.5 ± 0.05] 0.01 ± 0.004 [0.25 ± 0.1] 0.04 ± 0.002 [1.0 ± 0.05] DESCRIPTION ILC-0402 10 nH MODEL ±5% INDUCTANCE VALUE ER INDUCTANCE TOLERANCE e3 JEDEC® PACKAGE CODE LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I L C PRODUCT FAMILY Revision: 18-Sep-17 0 4 0 SIZE 2 E R PACKAGE CODE 1 0 N INDUCTANCE VALUE J TOL. Document Number: 34120 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000