IN74HCT153 DUAL 4-INPUT DATA SELECTOR/MULTIPLEXER High-Performance Silicon-Gate CMOS The IN74HCT153 is identical in pinout to the LS/ALS153. The IN74HCT153 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs. The Address Inputs select one of four Data Inputs from each multiplexer. Each multiplexer has an active-low Strobe control and a noninverting output. • TTL/NMOS Compatible Input Levels • Outputs Directly Interface to CMOS, NMOS, and TTL • Operating Voltage Range: 4.5 to 5.5 V • Low Input Current: 1.0 µA ORDERING INFORMATION IN74HCT153N Plastic IN74HCT153D SOIC TA = -55° to 125° C for all packages PIN ASSIGNMENT LOGIC DIAGRAM FUNCTION TABLE Inputs Output A1 A0 Strob Y e X X H L L L L D0 L H L D1 H L L D2 H H L D3 D0,D1...D3=the level of the respective Data Input X = don’t care PIN 16 =VCC PIN 8 = GND 1 IN74HCT153 MAXIMUM RATINGS* Symbol Parameter Value Unit VCC DC Supply Voltage (Referenced to GND) -0.5 to +7.0 V VIN DC Input Voltage (Referenced to GND) -1.5 to VCC +1.5 V VOUT DC Output Voltage (Referenced to GND) -0.5 to VCC +0.5 V IIN DC Input Current, per Pin mA ±20 IOUT DC Output Current, per Pin mA ±25 ICC DC Supply Current, VCC and GND Pins mA ±50 PD Power Dissipation in Still Air, Plastic DIP+ 750 mW SOIC Package+ 500 Tstg Storage Temperature -65 to +150 °C 260 TL Lead Temperature, 1 mm from Case for 10 °C Seconds (Plastic DIP or SOIC Package) * Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. +Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C SOIC Package: : - 7 mW/°C from 65° to 125°C RECOMMENDED OPERATING CONDITIONS Symbol Parameter VCC DC Supply Voltage (Referenced to GND) VIN, VOUT DC Input Voltage, Output Voltage (Referenced to GND) TA Operating Temperature, All Package Types t r, tf Input Rise and Fall Time (Figure 1) Min 4.5 0 Max 5.5 VCC Unit V V -55 0 +125 500 °C ns This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND≤(VIN or VOUT)≤VCC. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused outputs must be left open. 2 IN74HCT153 DC ELECTRICAL CHARACTERISTICS(Voltages Referenced to GND) Guaranteed Limit VCC Symbol Parameter Test Conditions V ≤85 ≤125 25 °C to °C °C -55°C VIH Minimum High- VOUT=0.1 V or VCC-0.1 V 4.5 2.0 2.0 2.0 Level Input IOUT≤ 20 µA 5.5 2.0 2.0 2.0 Voltage VIL Maximum Low - VOUT=0.1 V or VCC-0.1 V 4.5 0.8 0.8 0.8 Level Input IOUT ≤ 20 µA 5.5 0.8 0.8 0.8 Voltage VOH Minimum High- VIN=VIH or VIL 4.5 4.4 4.4 4.4 Level Output IOUT ≤ 20 µA 5.5 5.4 5.4 5.4 Voltage VIN=VIH or VIL 4.5 3.98 3.84 3.7 IOUT ≤ 4.0 mA VOL Maximum Low- VIN=VIH or VIL 4.5 0.1 0.1 0.1 Level Output IOUT ≤ 20 µA 5.5 0.1 0.1 0.1 Voltage VIN=VIH or VIL 4.5 0.26 0.33 0.4 IOUT ≤ 4.0 mA IIN Maximum Input VIN=VCC or GND 5.5 ±0.1 ±1.0 ±1.0 Leakage Current VIN=VCC ICC Maximum or GND 5.5 4.0 40 160 Quiescent Supply IOUT=0µA Current (per Package) VIN = 2.4 V, Any One Additional ≥-55°C 25°C to ∆ICC Quiescent Supply Input 125°C VIN=VCC or GND, Other Current Inputs 5.5 2.9 2.4 IOUT=0µA 3 Unit V V V V µA µA mA IN74HCT153 AC ELECTRICAL CHARACTERISTICS(VCC=5.0 V ± 10%, CL=50pF,Input tr=tf=6.0 ns) Guaranteed Limit Unit Symbol Parameter 25 °C ≤85°C ≤125 to °C -55°C tPLH, Maximum Propagation Delay, Input D to 34 43 51 ns tPHL Output Y (Figures 1 and 4) tPLH, Maximum Propagation Delay , Input A to 34 43 51 ns tPHL Output Y (Figures 2 and 4) tPLH, Maximum Propagation Delay , Strobe to 27 34 41 ns tPHL Output Y (Figures 3 and 4) 15 19 22 ns tTLH, tTHL Maximum Output Transition Time, Any Output (Figures 1 and 4) CIN Maximum Input Capacitance 10 10 10 pF CPD Power Dissipation Capacitance (Per Muliplexer) Used to determine the no-load dynamic power consumption: PD=CPDVCC2f+ICCVCC Typical @25°C,VCC=5.0 V 40 pF Figure 1. Switching Waveforms Figure 2. Switching Waveforms Figure 3. Switching Waveforms Figure 4. Test Circuit 4 IN74HCT153 EXPANDED LOGIC DIAGRAM 5