EVERLIGHT IRM-2638S18-P

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
Infrared Remote-control Receiver Module
IRM-2638S18-P
Features :
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Improved shielding against electrical field disturbance
• TTL and CMOS compatibility
• Output active low
• Low power consumption
• Improved immunity against ambient light
• Suitable burst length ≧10 cycles/burst
• Pb free
• RoHS refer to IRM-2xxx,3xxx series SGS report
Descriptions
‧The device is a miniature type infrared remote control system
receiver which has been developed and designed by utilizing the
most updated IC technology. The PIN diode and preamplifier are
assembled on lead frame, the epoxy package is designed as an IR
filter. The demodulated output signal can directly be decoded by a
microprocessor.
Applications
1. Optical switch
2. Light detecting portion of remote control
․AV instruments such as Audio, TV, VCR, CD, MD, etc.
․Home appliances such as Air-conditioner, Fan , etc.
․The other equipments with wireless remote control.
․CATV set top boxes
․Multi-media Equipment
PART
MATERIAL
COLOR
Chip
Silicon
Black
Shell
SK7
Silver-white
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Device No:SZDMO-026-002
Prepared date:05-July-2005
Rev 1
Page: 1 of 9
Prepared by:Zhifang Pan
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638S18-P
Package Dimensions
OUT
GND
Vcc
Notes: 1.All dimensions are in millimeters.
2.Tolerances unless dimensions ±0.3mm.
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Supply Voltage
Vcc
0~6
V
Operating Temperature
Topr
-25 ~ +85
℃
Storage Temperature
Tstg
-25 ~ +85
℃
Soldering Temperature
Tsol
260
℃
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Device No:SZDMO-026-002
Prepared date:05-July-2005
Notice
4mm from mold body
less than 10 seconds
Rev 1
Page: 2 of 9
Prepared by:Zhifang Pan
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638S18-P
Recommended Operating Condition
Supply Voltage Rating: Vcc 4.5V to 5.5V
Electro-Optical Characteristics (Ta=25℃, and Vcc=5.0V)
Parameter
Symbol
MIN.
TYP.
MAX.
Unit
Condition
Consumption Current
Icc
---
1.2
---
mA
No signal input
B.P.F Center Frequency
Fo
---
38
---
KHz
Peak Wavelength
λp
---
940
---
nm
L0
8
---
---
L45
m
5
---
---
Half Angle(Horizontal)
Θh
---
45
---
deg
Half Angle(Vertical)
Θv
---
45
---
deg
High Level Pulse Width
TH
400
---
800
μs
Low Level Pulse Width
TL
400
---
800
μs
High Level Output Voltage
VH
4.5
---
---
V
Low Level Output Voltage
VL
---
0.2
0.5
V
Reception Distance
At the ray axis
*1
At the ray axis
*2
*1:The ray receiving surface at a vertex and relation to the ray axis in the range of θ= 0° and θ=45°.
*2:A range from 30cm to the arrival distance. Average value of 50 pulses.
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Device No:SZDMO-026-002
Prepared date:05-July-2005
Rev 1
Page: 3 of 9
Prepared by:Zhifang Pan
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638S18-P
Test Method:
The specified electro-optical characteristics is satisfied under the following
Conditions at the controllable distance.
cMeasurement place
A place that is nothing of extreme light reflected in the room.
dExternal light
Project the light of ordinary white fluorescent lamps which are not high
Frequency lamps and must be less then 10 Lux at the module surface.
(Ee≦10Lux)
eStandard transmitter
A transmitter whose output is so adjusted as to Vo=400mVp-p and the output
Wave form shown in Fig.-1.According to the measurement method shown in
Fig.-2 the standard transmitter is specified.
However , the infrared photodiode to be used for the transmitter should be
λp=940nm,∆λ=50nm. Also, photodiode is used of PD438B(Vr=5V).
fMeasuring system
According to the measuring system shown in Fig.-3
Fig.-1
Transmitter Wave Form
D.U.T output Pulse
Carrier frequency is adjusted to
center frequency of each product.
IR TANSMITTER
OUTPUT WAVE FORM
OUTPUT PULSE
OF DEVICE
Duty=0.5
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Device No:SZDMO-026-002
Prepared date:05-July-2005
Rev 1
Page: 4 of 9
Prepared by:Zhifang Pan
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638S18-P
Fig.-2
Measuring Method
Fig.-3
Measuring System
20cm
10k
+5.0± 0.1V
L: Transmission Distance
Vcc
OUT
θ θ
10uF
D.U.T
Standard Transmitter
Vout
Standard Transmitter
Vout
100k
GND
θ: Angle Of Horizontal & Vertical Direction
Oscilloscope
Block Diagram:
IN
Vs
Input
Oscillator
CGA & filter
Demodulator
OUT
µC
AGC/ATC & digital control
Carrier frequency f0
Modulated IR signal
min 10 pulses
GND
Application Circuit:
RC Filter should be connected closely between Vcc pin and GND pin.
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Device No:SZDMO-026-002
Prepared date:05-July-2005
Rev 1
Page: 5 of 9
Prepared by:Zhifang Pan
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638S18-P
Typical Electro-Optical Characteristics Curves
Fig.-4 Relative Spectral Sensitivity vs.
Wavelength
Fig.-5 Relative Transmission Distance vs.
Direction
θ
Fig.-6 Output Pulse Length vs. Arrival Distance
Fig.-7 Arrival Distance vs. Supply Voltage
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Device No:SZDMO-026-002
Prepared date:05-July-2005
Rev 1
Page: 6 of 9
Prepared by:Zhifang Pan
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638S18-P
Typical Electro-Optical Characteristics Curves
Fig.-8 Relative Transmission Distance
vs. Center Carrier Frequency
Fig.-9 Arrival Distance vs. Ambient Temperature
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Device No:SZDMO-026-002
Prepared date:05-July-2005
Rev 1
Page: 7 of 9
Prepared by:Zhifang Pan
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638S18-P
Reliability Test Item And Condition
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test Items
Test Conditions
1 cycle
Temperature cycle
-25℃
Failure Judgement
Criteria
Samples(n)
Defective(c)
+85℃
(30min)(5min)(30min)
300 cycle test
n=22,c=0
Temp: +85℃
High temperature test Vcc:5V
1000hrs
L0≦ L×0.8
L45≦ L×0.8
Low temperature
storage
Temp: -25℃
High temperature
High humidity
Ta: 85℃,RH:85%
Solder heat
n=22,c=0
n=22,c=0
1000hrs
L: Lower
specification limit
n=22,c=0
1000hrs
Temp: 260±5℃ 10sec
n=22,c=0
4mm From the bottom of the package.
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Device No:SZDMO-026-002
Prepared date:05-July-2005
Rev 1
Page: 8 of 9
Prepared by:Zhifang Pan
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2638S18-P
Packing Quantity Specification
1. 1000PCS/1Box
2. 10Boxes/1Carton
Label Form Specification
CPN: Customer’s Production Number
P/N : Production Number
QTY: Packing Quantity
CAT: Ranks
HUE: Peak Wavelength
REF: Reference
LOT No: Lot Number
MADE IN TAIWAN: Production Place
IRM-2638S18-P
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for
any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without
EVERLIGHT’s consent.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http:\\www.everlight.com
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Device No:SZDMO-026-002
Prepared date:05-July-2005
Rev 1
Page: 9 of 9
Prepared by:Zhifang Pan