EVERLIGHT IRM

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
Infrared Remote-control Receiver Module
IRM-2738F4
Features :
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Improved shielding against electrical field disturbance
• TTL and CMOS compatibility
• Output active low
• Low power consumption
• Improved immunity against ambient light
• Suitable burst length ≧10 cycles/burst
• Pb free
• The product itself will remain within RoHS compliant version.
Descriptions
‧The IRM-2738F4 are miniaturized receivers for infrared remote
control systems. PIN diode and preamplifier are assembled on
lead frame, the epoxy package is designed as IR filter. The
demodulated output signal can directly be decoded by a
microprocessor. IRM-2738F4 is the standard IR remote control
receiver series, supporting all major transmission codes.
Applications
1. Optical switch
2. Light detecting portion of remote control
․AV instruments such as Audio, TV, VCR, CD, MD, etc.
․Home appliances such as Air-conditioner, Fan , etc.
․The other equipments with wireless remote control.
․CATV set top boxes
․Multi-media Equipment
PART
MATERIAL
COLOR
Chip
Silicon
Black
Compound
Epoxy
Black
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 2
Device No:DMO-027-284
Prepared date:07-20-2005
Prepared by:
Page: 1 of 9
Carryll Hsu
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2738F4
Package Dimensions
OUT
Vcc
GND
Notes: 1.All dimensions are in millimeters.
2.Tolerances unless dimensions ±0.3mm.
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 2
Device No:DMO-027-284
Prepared date:07-20-2005
Prepared by:
Notice
Page: 2 of 9
Carryll Hsu
EVERLIGHT ELECTRONICS CO.,LTD.
Supply Voltage
Vcc
0~6
V
Operating Temperature
Topr
-25 ~ +80
℃
Storage Temperature
Tstg
-40 ~ +85
℃
Soldering Temperature
Tsol
260
℃
4mm from mold body
less than 10 seconds
IRM-2738F4
Recommended Operating Condition
Supply Voltage Rating: Vcc 4.5V to 5.5V
Electro-Optical Characteristics (Ta=25℃, and Vcc=5 V)
Parameter
Symbol
MIN.
TYP.
MAX.
Unit
Condition
Consumption Current
Icc
---
1.2
---
mA
No signal input
B.P.F Center Frequency
Fo
---
38
---
KHz
Peak Wavelength
λp
---
940
---
nm
L0
14
---
---
L45
m
7
---
---
Half Angle(Horizontal)
Θh
---
45
---
deg
Half Angle(Vertical)
Θv
---
45
---
deg
High Level Pulse Width
TH
400
---
800
μs
Low Level Pulse Width
TL
400
---
800
μs
High Level Output Voltage
VH
4.5
---
---
V
Low Level Output Voltage
VL
---
0.2
0.5
V
Reception Distance
At the ray axis
*1
At the ray axis
*2
*1:The ray receiving surface at a vertex and relation to the ray axis in the range of θ= 0° and θ=45°.
*2:A range from 30cm to the arrival distance. Average value of 50 pulses.
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 2
Device No:DMO-027-284
Prepared date:07-20-2005
Prepared by:
Page: 3 of 9
Carryll Hsu
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2738F4
Test Method:
The specified electro-optical characteristics is satisfied under the following
Conditions at the controllable distance.
cMeasurement place
A place that is nothing of extreme light reflected in the room.
dExternal light
Project the light of ordinary white fluorescent lamps which are not high
Frequency lamps and must be less then 10 Lux at the module surface.
(Ee≦10Lux)
eStandard transmitter
A transmitter whose output is so adjusted as to Vo=400mVp-p and the output
Wave form shown in Fig.-1.According to the measurement method shown in
Fig.-2 the standard transmitter is specified.
However , the infrared photodiode to be used for the transmitter should be
λp=940nm,∆λ=50nm. Also, photodiode is used of PD438B(Vr=5V).
fMeasuring system
According to the measuring system shown in Fig.-3
Fig.-1
Transmitter Wave Form
D.U.T output Pulse
Carrier frequency is adjusted to
center frequency of each product.
IR TANSMITTER
OUTPUT WAVE FORM
OUTPUT PULSE
OF DEVICE
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 2
Device No:DMO-027-284
Prepared date:07-20-2005
Prepared by:
Page: 4 of 9
Carryll Hsu
EVERLIGHT ELECTRONICS CO.,LTD.
Duty=0.5
IRM-2738F4
Fig.-2
Measuring Method
Fig.-3
Measuring System
20cm
10k
+5.0± 0.1V
L: Transmission Distance
Vcc
OUT
θ θ
10uF
D.U.T
Standard Transmitter
Vout
Standard Transmitter
Vout
100k
GND
θ: Angle Of Horizontal & Vertical Direction
Oscilloscope
Block Diagram:
Vs
IN
Input
Oscillator
CGA & filter
Demodulator
OUT
µC
AGC/ATC & digital control
Carrier frequency f0
Modulated IR signal
min 10 pulses
GND
Application Circuit:
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 2
Device No:DMO-027-284
Prepared date:07-20-2005
Prepared by:
Page: 5 of 9
Carryll Hsu
EVERLIGHT ELECTRONICS CO.,LTD.
RC Filter should be connected closely between Vcc pin and GND pin.
IRM-2738F4
Typical Electro-Optical Characteristics Curves
Fig.-4 Relative Spectral Sensitivity vs.
Wavelength
Fig.-5 Relative Transmission Distance vs.
Direction
θ
Fig.-6 Output Pulse Length vs. Arrival Distance
Fig.-7 Arrival Distance vs. Supply Voltage
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 2
Device No:DMO-027-284
Prepared date:07-20-2005
Prepared by:
Page: 6 of 9
Carryll Hsu
EVERLIGHT ELECTRONICS CO.,LTD.
Transmission Distance Lc (m)
17.0
14.0
10.5
7.0
3.5
Supply Voltage Vcc (V)
IRM-2738F4
Typical Electro-Optical Characteristics Curves
Fig.-8 Relative Transmission Distance
vs. Center Carrier Frequency
Fig.-9 Arrival Distance vs. Ambient Temperature
20
15
10
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 2
Device No:DMO-027-284
Prepared date:07-20-2005
Prepared by:
Page: 7 of 9
Carryll Hsu
EVERLIGHT ELECTRONICS CO.,LTD.
IRM-2738F4
█ Reliability Test Item And Condition
The reliability of products shall be satisfied with items listed below.
Confidence level: 90%
LTPD: 10%
Test Items
Temperature cycle
Test Conditions
Failure Judgement
Criteria
1 cycle
L0≦ L×0.8
L45≦ L×0.8
-40℃ +25℃ +85℃
(30min)(5min)(30min)
300 cycle test
Temp: +85℃
High temperature test Vcc:5V
1000hrs
Low temperature
storage
Samples(n)
Defective(c)
n=22,c=0
L: Lower specification
n=22,c=0
limit
Temp: -40℃
1000hrs
n=22,c=0
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 2
Device No:DMO-027-284
Prepared date:07-20-2005
Prepared by:
Page: 8 of 9
Carryll Hsu
EVERLIGHT ELECTRONICS CO.,LTD.
High temperature
High humidity
Ta: 85℃,RH:85%
1000hrs
n=22,c=0
Solder heat
Temp: 260±5℃ 10sec
4mm From the bottom of the package.
n=22,c=0
IRM-2738F4
Packing Quantity Specification
1. 1500PCS/1Box
2. 10Boxes/1Carton
Label Form Specification
IRM-2738F4
CPN: Customer’s Production Number
P/N : Production Number
QTY: Packing Quantity
CAT: Ranks
HUE: Peak Wavelength
REF: Reference
LOT No: Lot Number
MADE IN TAIWAN: Production Place
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 2
Device No:DMO-027-284
Prepared date:07-20-2005
Prepared by:
Page: 9 of 9
Carryll Hsu
EVERLIGHT ELECTRONICS CO.,LTD.
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for
any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without
EVERLIGHT’s consent.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http:\\www.everlight.com
Everlight Electronics Co., Ltd.
http:\\www.everlight.com
Rev 2
Device No:DMO-027-284
Prepared date:07-20-2005
Prepared by:
Page: 10 of 9
Carryll Hsu