PRELIMINARY K6R4008C1C-C, K6R4008C1C-E, K6R4008C1C-I CMOS SRAM Document Title 512Kx8 Bit High Speed Static RAM(5V Operating). Operated at Extended and Industrial Temperature Ranges. Revision History Rev No. History Draft Data Remark Rev. 0.0 Initial release with Preliminary. Feb. 12. 1999 Preliminary Rev. 1.0 1.1 Removed Low power Version. 1.2 Removed Data Retention Characteristics. 1.3 Changed ISB1 to 20mA Mar. 29. 1999 Preliminary Rev. 2.0 2.1 Relax D.C parameters. Aug. 19. 1999 Preliminary Mar. 27. 2000 Final Sep. 24. 2001 Final Item Previous 170mA 165mA 160mA 12ns 15ns 20ns ICC Current 195mA 190mA 185mA 2.2 Relax Absolute Maximum Rating. Item Voltage on Any Pin Relative to Vss Rev. 3.0 Previous -0.5 to 7.0 Current -0.5 to Vcc+0.5 3.1 Delete Preliminary 3.2 Update D.C parameters and 10ns part. 10ns 12ns 15ns 20ns ICC 195mA 190mA 185mA Previous Isb Isb1 70mA 20mA ICC 170mA 160mA 150mA 140mA Current Isb Isb1 60mA 10mA 3.3 Added Extended temperature range Rev. 4.0 Delete 20ns speed bin The attached data sheets are prepared and approved by SAMSUNG Electronics. SAMSUNG Electronics CO., LTD. reserve the right to change the specifications. SAMSUNG Electronics will evaluate and reply to your requests and questions on the parameters of this device. If you have any questions, please contact the SAMSUNG branch office near your office, call or contact Headquarters. -1- Rev 4.0 September 2001 PRELIMINARY K6R4008C1C-C, K6R4008C1C-E, K6R4008C1C-I CMOS SRAM 512K x 8 Bit High-Speed CMOS Static RAM FEATURES GENERAL DESCRIPTION • Fast Access Time 10,12,15ns(Max.) • Low Power Dissipation Standby (TTL) : 60mA(Max.) (CMOS) : 10mA(Max.) Operating K6R4008C1C-10 : 170mA(Max.) K6R4008C1C-12 : 160mA(Max.) K6R4008C1C-15 : 150mA(Max.) • Single 5.0V±10% Power Supply • TTL Compatible Inputs and Outputs • I/O Compatible with 3.3V Device • Fully Static Operation - No Clock or Refresh required • Three State Outputs • Center Power/Ground Pin Configuration • Standard Pin Configuration K6R4008C1C-J : 36-SOJ-400 K6R4008C1C-T: 44-TSOP2-400BF The K6R4008C1C is a 4,194,304-bit high-speed Static Random Access Memory organized as 524,288 words by 8 bits. The K6R4008C1C uses 8 common input and output lines and has an output enable pin which operates faster than address access time at read cycle. The device is fabricated using SAMSUNG′s advanced CMOS process and designed for highspeed circuit technology. It is particularly well suited for use in high-density high-speed system applications. The K6R4008C1C is packaged in a 400 mil 36-pin plastic SOJ and 44-pin plastic TSOP type II. FUNCTIONAL BLOCK DIAGRAM A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 I/O1 ~I/O8 Pre-Charge Circuit Row Select Clk Gen. ORDERING INFORMATION Memory Array 1024 Rows 512 x 8 Columns Data Cont. I/O Circuit Column Select K6R4008C1C-C10/C12/C15 Commercial Temp. K6R4008C1C-E10/E12/E15 Extended Temp. K6R4008C1C-I10/I12/I15 Industrial Temp. CLK Gen. A10 A11 A12 A13 A14 A15 A16 A17 A18 CS WE OE -2- Rev 4.0 September 2001 PRELIMINARY K6R4008C1C-C, K6R4008C1C-E, K6R4008C1C-I CMOS SRAM PIN CONFIGURATION (Top View) 1 A0 36 N.C 2 A1 35 A18 N.C 1 44 N.C N.C 2 43 N.C A0 3 42 N.C A1 4 A2 3 34 A17 41 A18 A3 4 33 A16 A2 5 40 A17 A4 5 32 A15 A3 6 39 A16 CS 6 31 OE A4 7 38 A15 I/O1 7 30 I/O8 CS 8 37 OE I/O1 9 36 I/O8 I/O2 8 Vcc 9 Vss 10 27 Vcc Vss 12 33 Vcc I/O3 11 26 I/O6 I/O3 13 32 I/O6 I/O4 12 25 I/O5 I/O4 14 31 I/O5 WE 29 I/O7 36-SOJ I/O2 10 28 Vss Vcc 11 24 A14 13 35 I/O7 44-TSOP2 34 Vss WE 15 30 A14 A5 16 29 A13 A6 17 28 A12 A5 14 23 A13 A6 15 22 A12 A7 18 27 A11 A7 16 21 A11 A8 19 26 A10 A8 17 20 A10 A9 20 25 N.C A9 18 19 N.C N.C 21 24 N.C N.C 22 23 N.C PIN FUNCTION Pin Name A0 - A18 Pin Function Address Inputs WE Write Enable CS Chip Select OE Output Enable I/O1 ~ I/O8 Data Inputs/Outputs VCC Power(+5.0V) VSS Ground N.C No Connection ABSOLUTE MAXIMUM RATINGS* Parameter Voltage on Any Pin Relative to V SS Symbol Rating Unit VIN, VOUT -0.5 to VCC+0.5 V VCC -0.5 to 7.0 V Voltage on VCC Supply Relative to VSS Power Dissipation Storage Temperature Operating Temperature PD 1.0 W TSTG -65 to 150 °C Commercial TA 0 to 70 °C Extended TA -25 to 85 °C Industrial TA -40 to 85 °C * Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operating sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. -3- Rev 4.0 September 2001 PRELIMINARY K6R4008C1C-C, K6R4008C1C-E, K6R4008C1C-I CMOS SRAM RECOMMENDED DC OPERATING CONDITIONS*(TA=0 to 70°C) Symbol Min Typ Max Unit Supply Voltage Parameter VCC 4.5 5.0 5.5 V Ground VSS 0 0 0 V Input High Voltage VIH 2.2 - VCC+0.5*** V Input Low Voltage VIL -0.5** - 0.8 V * The above parameters are also guaranteed at extended and industrial temperature range. ** VIL(Min) = -2.0V a.c(Pulse Width ≤ 8ns) for I ≤ 20mA. *** VIH(Max) = V CC + 2.0V a.c (Pulse Width ≤ 8ns) for I ≤ 20mA. DC AND OPERATING CHARACTERISTICS*(TA=0 to 70°C, Vcc=5.0V±10%, unless otherwise specified) Parameter Symbol Test Conditions Min Max Unit Input Leakage Current ILI VIN=VSS to VCC -2 2 µA Output Leakage Current ILO CS=VIH or OE=VIH or WE=VIL VOUT=VSS to VCC -2 2 µA Operating Current ICC Min. Cycle, 100% Duty CS=VIL, VIN=VIH or VIL, IOUT=0mA - 170 mA Com. 10ns Ext. Ind. 12ns - 160 15ns - 150 10ns - 185 12ns - 175 15ns - 165 ISB Min. Cycle, CS=VIH - 60 mA ISB1 f=0MHz, CS≥VCC-0.2V, VIN≥VCC-0.2V or VIN≤0.2V - 10 mA Output Low Voltage Level VOL IOL=8mA - 0.4 V Output High Voltage Level VOH IOH=-4mA 2.4 - V - 3.95 V Standby Current VOH1** IOH1=-0.1mA * The above parameters are also guaranteed at extended and industrial temperature range. ** VCC=5.0V±5%, Temp.=25°C. CAPACITANCE*(TA=25°C, f=1.0MHz) Item Symbol Test Conditions MIN Max Unit Input/Output Capacitance CI/O VI/O=0V - 8 pF Input Capacitance CIN VIN=0V - 7 pF * Capacitance is sampled and not 100% tested. -4- Rev 4.0 September 2001 PRELIMINARY K6R4008C1C-C, K6R4008C1C-E, K6R4008C1C-I CMOS SRAM AC CHARACTERISTICS(TA=0 to 70°C, VCC=5.0V±10%, unless otherwise noted.) TEST CONDITIONS* Parameter Value Input Pulse Levels 0V to 3V Input Rise and Fall Times 3ns Input and Output timing Reference Levels 1.5V Output Loads See below * The above test conditions are also applied at extended and industrial temperature range. Output Loads(A) Output Loads(B) for tHZ, tLZ, tWHZ, tOW, tOLZ & tOHZ +5.0V RL = 50Ω DOUT VL = 1.5V 480Ω DOUT 30pF* ZO = 50Ω 255Ω 5pF* * Including Scope and Jig Capacitance * Capacitive Load consists of all components of the test environment. READ CYCLE* Parameter Symbol K6R4008C1C-10 K6R4008C1C-12 K6R4008C1C-15 Unit Min Max Min Max Min Max tRC 10 - 12 - 15 - ns Address Access Time tAA - 10 - 12 - 15 ns Chip Select to Output tCO - 10 - 12 - 15 ns Output Enable to Valid Output tOE - 5 - 6 - 7 ns Chip Enable to Low-Z Output tLZ 3 - 3 - 3 - ns Read Cycle Time Output Enable to Low-Z Output tOLZ 0 - 0 - 0 - ns Chip Disable to High-Z Output tHZ 0 5 0 6 0 7 ns Output Disable to High-Z Output tOHZ 0 5 0 6 0 7 ns Output Hold from Address Change tOH 3 - 3 - 3 - ns Chip Selection to Power Up Time tPU 0 - 0 - 0 - ns Chip Selection to Power DownTime tPD - 10 - 12 - 15 ns * The above parameters are also guaranteed at extended and industrial temperature range. -5- Rev 4.0 September 2001 PRELIMINARY K6R4008C1C-C, K6R4008C1C-E, K6R4008C1C-I CMOS SRAM WRITE CYCLE* Parameter Symbol K6R4008C1C-10 K6R4008C1C-12 K6R4008C1C-15 Min Max Min Max Min Max Unit Write Cycle Time tWC 10 - 12 - 15 - ns Chip Select to End of Write tCW 7 - 8 - 10 - ns Address Set-up Time tAS 0 - 0 - 0 - ns Address Valid to End of Write tAW 7 - 8 - 10 - ns Write Pulse Width(OE High) tWP 7 - 8 - 10 - ns Write Pulse Width(OE Low) tWP1 10 - 12 - 15 - ns Write Recovery Time tWR 0 - 0 - 0 - ns Write to Output High-Z tWHZ 0 6 0 6 0 7 ns Data to Write Time Overlap tDW 5 - 6 - 7 - ns Data Hold from Write Time tDH 0 - 0 - 0 - ns End Write to Output Low-Z tOW 3 - 3 - 3 - ns * The above parameters are also guaranteed at extended and industrial temperature range. TIMING DIAGRAMS TIMING WAVEFORM OF READ CYCLE(1) (Address Controlled, CS=OE=VIL, WE=VIH ) tRC Address tAA tOH Data Out Valid Data Previous Valid Data TIMING WAVEFORM OF READ CYCLE(2) (WE=VIH) tRC Address tAA tCO CS tHZ(3,4,5) tOE tOHZ OE tOH tOLZ tLZ(4,5) Data out Valid Data VCC ICC Current ISB tPU tPD 50% 50% NOTES(WRITE CYCLE) 1. WE is high for read cycle. 2. All read cycle timing is referenced from the last valid address to the first transition address. 3. tHZ and tOHZ are defined as the time at which the outputs achieve the open circuit condition and are not referenced to VOH or VOL levels. 4. At any given temperature and voltage condition, tHZ(Max.) is less than tLZ(Min.) both for a given device and from device to device. 5. Transition is measured ±200mV from steady state voltage with Load(B). This parameter is sampled and not 100% tested. 6. Device is continuously selected with CS=VIL. 7. Address valid prior to coincident with CS transition low. 8. For common I/O applications, minimization or elimination of bus contention conditions is necessary during read and write cycle. -6- Rev 4.0 September 2001 PRELIMINARY K6R4008C1C-C, K6R4008C1C-E, K6R4008C1C-I CMOS SRAM TIMING WAVEFORM OF WRITE CYCLE(1) (OE= Clock) tWC Address tWR(5) tAW OE tCW(3) CS tWP(2) tAS(4) WE tDW Data in High-Z tDH Valid Data tOHZ(6) High-Z(8) Data out TIMING WAVEFORM OF WRITE CYCLE(2) (OE=Low Fixed) tWC Address tWR(5) tAW tCW(3) CS tAS(4) tWP1(2) WE tDW Data in High-Z tDH Valid Data tWHZ(6) tOW (10) (9) High-Z(8) Data out TIMING WAVEFORM OF WRITE CYCLE(3) (CS = Controlled) tWC Address tAW tWR(5) tCW(3) CS tAS(4) tWP(2) WE tDW Data in High-Z Valid Data tLZ Data out tDH High-Z tWHZ(6) High-Z(8) High-Z -7- Rev 4.0 September 2001 PRELIMINARY K6R4008C1C-C, K6R4008C1C-E, K6R4008C1C-I CMOS SRAM NOTES(WRITE CYCLE) 1. All write cycle timing is referenced from the last valid address to the first transition address. 2. A write occurs during the overlap of a low CS and WE. A write begins at the latest transition CS going low and WE going low ; A write ends at the earliest transition CS going high or WE going high. tWP is measured from the beginning of write to the end of write. 3. t CW is measured from the later of CS going low to end of write. 4. t AS is measured from the address valid to the beginning of write. 5. t WR is measured from the end of write to the address change. tWR applied in case a write ends as CS or WE going high. 6. If OE, CS and WE are in the Read Mode during this period, the I/O pins are in the output low-Z state. Inputs of opposite phase of the output must not be applied because bus contention can occur. 7. For common I/O applications, minimization or elimination of bus contention conditions is necessary during read and write cycle. 8. If CS goes low simultaneously with WE going or after WE going low, the outputs remain high impedance state. 9. Dout is the read data of the new address. 10. When CS is low : I/O pins are in the output state. The input signals in the opposite phase leading to the output should not be applied. FUNCTIONAL DESCRIPTION CS WE OE Mode I/O Pin Supply Current H X L H X* Not Select High-Z ISB, ISB1 H Output Disable High-Z ICC L L H L Read DOUT ICC L X Write DIN ICC * X means Don′t Care. -8- Rev 4.0 September 2001 PRELIMINARY K6R4008C1C-C, K6R4008C1C-E, K6R4008C1C-I CMOS SRAM Units:millimeters/Inches PACKAGE DIMENSIONS 36-SOJ-400 #19 10.16 0.400 #36 11.18 ±0.12 0.440 ±0.005 9.40 ±0.25 0.370 ±0.010 0.20 #1 +0.10 -0.05 0.008 +0.004 -0.002 #18 0.69 MIN 0.027 23.90 MAX 0.941 23.50 ±0.12 0.925 ±0.005 1.19 ) 0.047 1.27 ( ) 0.050 ( 0.43 ( 0.95 ) 0.0375 3.76 MAX 0.148 0.10 MAX 0.004 +0.10 -0.05 0.017 +0.004 -0.002 1.27 0.050 0.71 +0.10 -0.05 0.028 +0.004 -0.002 44-TSOP2-400BF Units:millimeters/Inches 0~8° 0.25 0.010 TYP #23 #44 11.76 ±0.20 0.463 ±0.008 10.16 0.400 0.45 ~0.75 0.018 ~ 0.030 ( 0.50 ) 0.020 #1 #22 18.81 MAX 0.741 0.075 0.125 +- 0.035 + 0.003 18.41 ±0.10 0.725 ±0.004 0.005 - 0.001 1.00 ±0.10 0.039 ±0.004 ( 0.805 ) 0.032 0.30 +0.10 −0.05 0.012 +0.004 −0.002 0.05 0.002MIN 0.80 0.0315 -9- 1.20 MAX 0.047 0.10 0.004 MAX Rev 4.0 September 2001