KAM10 SERIES AC - DC POWER MODULE 10W UL / cUL / TUV / CE FEATURES ‧AC/DC POWER MODULE ‧UNIVERSAL INPUT 85 ~ 265 VAC ‧HIGH EFFICIENCY UP TO 78% ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧2 YEARS WARRANTY R H a UL 60950-1 EN 60950-1 MODEL LIST INPUT VOLTAGE MODEL NO. OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT EFF. (min.) EFF. (typ.) CAPACITOR LOAD (max.) Single Output Models KAM1003 85~265 VAC +3.3 VDC 10 WATTS 3000 mA 67% 70% 7000μF 72% KAM1005 85~265 VAC 10 WATTS + 5 VDC 2000 mA 70% KAM1012 85~265 VAC 10 WATTS + 12 VDC 840 mA 75% 77% 7000μF 3500μF KAM1015 85~265 VAC 10 WATTS + 15 VDC 670 mA 75% 77% 1500μF KAM1024 85~265 VAC 10 WATTS + 24 VDC 420 mA 76% 78% 470 μF Dual Output Models KAM1012D 85~265 VAC 10 WATTS ± 12 VDC ± 420 mA 75% 77% ± 1000 μF KAM1015D 85~265 VAC 10 WATTS ± 15 VDC ± 335 mA 74% 77% ± 470 μF KAM10503D 85~265 VAC 10 WATTS + 5 /+ 3.3 VDC +0.8 / +2A 72% 74% 3500 μF SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics Conditions Switching frequency Vi nom, Io nom Isolation voltage Input - Output Isolation resistance Ambient temperature Case temperature Operating at Vi nom, Io nom min. 100 unit KHz VAC/VDC Input - Output, @ 500VDC 100 MΩ Operating at Vi nom, Io nom -40 o Vi nom, +51 to + 71 C Storage temperature Non operational -40 Relative humidity Vi nom, Io nom 20 Temperature coefficient Vi nom, Io min 2010.03.16 max. 3000/4242 Derating www.chinfa.com typ. + 71 o + 85 o 2 o +100 C C %/ C o C 95 % RH ± 0.03 % / oC [email protected] P1 KAM10 SERIES AC - DC POWER MODULE SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics Conditions min. Bellcore issue 6 @40 oC, GB 3.3V, 5V & 503D models MTBF Altitude during operation typ. max. 1300000 Hours 12V & 15V models 1340000 Hours 24V, 12D & 15D models 1380000 Hours IEC 60068-2-13 Dimension Cooling unit m 4850 mm L76.2 x W50.8 x H22.8 Free air convection INPUT SPECIFICATIONS Characteristics Rated input voltage unit 85 265 VAC AC in 85 265 VAC DC in 120 375 VDC Io nom Input voltage range Input current Ta min ... Ta max, Io nom Vi : 115 / 230 VAC, Io nom Rated input current Vi : 85 VAC, Io nom Line frequency Vi nom, Io nom Inrush current Leakage current Vi : 115 / 230 VAC, Io nom Input - Output typ. max. min. Conditions 230 / 150 mA 350 mA 63 10/18 Hz 0.25 mA max. unit 47 A OUTPUT SPECIFICATIONS Characteristics Conditions Output voltage accuracy Vi nom, Io nom Minimum load Vi nom typ. % ±2 single output models dual output models (each output) Line regulation min. 0 % 20 % Io nom, Vi min ...Vi max ±1 % single output models ±2 % dual output models ±2 % Load regulation Vi nom, Io min ...Io nom Cross regulation Asymmetrical load 20% - 100% FL Hold up time Vi 115/230 VAC, Io nom Turn on time Vi nom, Io nom 1000 ms Rise time Vi nom, Io nom 150 ms Fall time Vi nom, Io nom 150 ms Transient recovery time Vi nom, 1~0.5 Io nom 1 ms Ripple & noise External trim ADJ. Range (for single output only) 1) Efficiency % ±6 ms 15/30 Vi nom, Io nom 3.3V & 5V models 100 mV BW = 20MHz 12V, 15V, 24V & dual 150 mV + 10 % Io = 5% ...100% - 10 Vi nom, Io nom, Po / Pi Up to 78%, See model list and typ efficiency curve NOTE 1 : Pls refer to Fig 1 & Table 1 for connection and resistance recommended. CONTROL AND PROTECTION Characteristics Conditions Input fuse Internal surge voltage protection Output short circuit www.chinfa.com 2010.03.16 min. typ. unit max. T2A / 250VAC internal IEC 61000-4-5 Varistor Hiccup mode [email protected] P2 KAM10 SERIES AC - DC POWER MODULE SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed APPROVALS AND STANDARDS UL / cUL UL 60950-1, Recognized TUV EN 60950-1, CB scheme CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2, EN 61000-4-3 EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8 EN 61000-4-11, EN 61204-3 Vibration resistance meet IEC 60068-2-6 (10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 axes, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size 76.2 x 50.8 x 22.8mm ( 3 x 2 x 0.90 inches) Case material Plastic Weight 160g Potting material Epoxy MECHANISM & PIN CONFIGURATION 50.80 [2.00] mm [inch] 25.40 [1.00] 12.70 [0.50] 5.10 [0.20] BURL AT 4 CORNER 1 2 25.40 [1.00] TP 3 x 8 55.90 [2.20] 22.80 [0.90] 76.20 [3.00] 6.00 [0.24] DIA 1.00 [0.04] 52.50 [2.07] 4 6 5 3 10.00 [0.40] GENERAL TOLERANCE 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] 5.10 [0.20] 20.30 [0.80] 20.30 [0.80] BOTTOM VIEW PIN ASSIGNMENT GENERAL PIN NO. 1 2 3 4 5 6 SINGLE AC IN AC IN Vo - Trim NO PIN Vo + DUAL 12D, 15D AC IN AC IN Vo - NO PIN com Vo + NO PIN com +5V 503D AC IN AC IN +3.3V CIRCUIT SCHEMATIC ‧Block diagram for KAM10 series with single output AC IN Fuse Vo + AC IN Rectifier Line Filter ‧Block diagram for KAM10 series with dual output Inrush Current Switching Limiter and Device Rectifier Vo - Opto Isolation Reference & Error Amp. Vo + Rectifier Line Filter AC IN Control Circuit Fuse Inrush Current Switching Limiter and Device Rectifier com Vo - AC IN Control Circuit Opto Isolation Reference & Error Amp. Trim www.chinfa.com 2010.03.16 [email protected] P3 KAM10 SERIES AC - DC POWER MODULE TYP. CURRENT LIMITED CURVE CIRCUIT SCHEMATIC ‧Block diagram for KAM10503D AC IN Fuse LDO Rectifier Line Filter Inrush Current Switching Limiter and Device Rectifier Output Voltage [ % ] v 5V Regulator 3.3V Rectifier com AC IN Control Circuit Reference & Error Amp. Opto Isolation KAM1 024 Hiccup mode 100 50 t Time DERATING CURVE TYP. EFFICIENCY CURVE KAM1024 80 EFFICIENCY [ % ] Power out [ % ] 100 60 70 60 50 230 Vac 115 Vac 40 0 -40 51 71 10 50 Power out [ % ] 25 Temperature [ oC ] 75 100 Fig. 1 Trim connection (For single output only) 6 Vo + 4 Trim 3 Vo - Rext 1 6 Vo + 4 Trim 3 Vo - Rext 2 Table 1 Typical resistor values for various output voltage adjustment settings and max continuous power Type Rext 1 Rext 2 Max continuous power Vo nom -5% Vo nom -10% Vo nom +5% Vo nom +10% KAM 1003 180KΩ 56KΩ 100KΩ 20KΩ 10W KAM 1005 39KΩ 15KΩ 9.1KΩ 2.2KΩ 10W KAM 1012 51KΩ 20KΩ 10KΩ 2KΩ 10W KAM 1015 150KΩ 68KΩ 20KΩ 4.7KΩ 10W KAM 1024 130KΩ 56KΩ 12KΩ 2KΩ 10W www.chinfa.com 2010.03.16 [email protected] P4