MARL 217-945-76-65

FEATURES
FILAMENT REPLACEMENT LEDs - Multi-LED Cluster
l
217 SERIES
PACK QUANTITY = 1 PIECE
l
Direct replacement for E27 (European Standard)
BA22 (UK) and E26 (North American Standard) also
available
l
20 LED Cluster
l
Optional polycarbonate lens
SPECIFICATIONS
Ordering Information & Typical Technical Characteristics (Ta = 25°C)
Mean Time Between Failure = 100,000 Hours.
PART NUMBER
COLOUR
Luminous intensity figures refer to the unmodified discrete LED.
LENS
VOLTAGE
AC/DC
Vopr
CURRENT
DC
lopr
LUMINOUS
INTENSITY
lv@20mA
WAVE
OPERATING
STORAGE
LENGTH
TEMP
TEMP
λp
Topr
Tstg
HIGH INTENSITY
217-501-22-65
Red
Water Clear
24 Vdc
75
11000
643
-40 ~ +95^
-40 ~ +100
Yes
217-521-22-65
Yellow
Water Clear
24 Vdc
75
16000
591
-40 ~ +95^
-40 ~ +100
Yes
217-532-22-65
Green
Water Clear
24 Vdc
75
23000
527
-40 ~ +95^
-40 ~ +100
Yes
217-930-22-65
Blue
Water Clear
24 Vdc
75
7000
470
-40 ~ +95^
-40 ~ +100
Yes
217-997-22-65
Cool White
Water Clear
24 Vdc
75
14000
*See below
-40 ~ +95^
-40 ~ +100
Yes
217-501-75-65
Red
Water Clear
110 Vac
22
11000
643
-40 ~ +95^
-40 ~ +100
Yes
217-521-75-65
Yellow
Water Clear
110 Vac
22
16000
591
-40 ~ +95^
-40 ~ +100
Yes
217-532-75-65
Green
Water Clear
110 Vac
22
23000
527
-40 ~ +95^
-40 ~ +100
Yes
217-930-75-65
Blue
Water Clear
110 Vac
22
7000
470
-40 ~ +95^
-40 ~ +100
Yes
217-997-75-65
Cool White
Water Clear
110 Vac
22
14000
*See below
-40 ~ +95^
-40 ~ +100
Yes
mA
mcd
nm
0
UNITS
997
*Typical emission colour cool white
x
0.296
0.283
0.330
0.330
y
0.276
0.305
0.360
0.318
C
C
0
^ = Products must be derated according to the derating information. Each derating graph refers to
specific LEDs.
Appropriate LED numbers shown. - Refer to page 3.
Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch.
How to Order:
website: www.marl.co.uk • email: [email protected]
•
Telephone +44 (0)1229 582430
•
Fax: +44 (0)1229 585155
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service.
for products or service.
Marl International reserve the right to alter without notice the specification or any conditions of supply
© MARL INTERNATIONAL LTD 2008 : DS 007/08
Issue 1
Page 1 of
3
217 Series
Ø68.5
Ø22.1
97
Dimensions in mm (Typical)
Not to scale
TECHNICAL INFORMATION
Lamp Base Style
Series
E27 Filament Base
217
Metric Equivalent (mm)
26
Maximum Power Dissipation (mW)
2500
DESIGN CONSIDERATIONS
Single-Chip LEDs
All devices feature water clear high intensity LEDs as standard.
Product Evaluation
Filament Replacement LEDs have been specifically designed to meet the primary objective of providing improved reliability. As this product range
is suitable for both new-build and retro-fit, (sometimes in very old systems), a wide range of illuminated lamp holders can be encountered. Due to
subjectivity, evaluation of the LED
Power Derating
The forward voltage/current value of an LED is dependant upon the ambient temperature of the environment in which it is operated. Therefore,
care must be taken to operate the LED at the correct voltage/current values, depending upon the ambient temperature. Consequently, a
recommendation regarding operating voltages and currents is given in order to address these temperature effects. This recommendation is
termed ‘de-rating’.
It is usual for forward voltages and currents to be specified for ambient temperature of 25°C. However, because the values of these qualities vary
with temperature, Marl should be contacted if the device is to be operated at a temperature significantly higher than 25°C.
Marl accept no liability for any product that is operated higher than the stated voltage.
Electro-static Discharge (ESD)
Build up of electrostatic discharge occurs in many situations involving people moving and handling products. The range of possible situations is
very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to
these levels handles a ‘static sensitive device’, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that
precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static
sensitive devices, changes in manufacturing technology and materials used to produce higher intensity products over a large range of the
wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and
despatch. We recommend all users of LED based products follow the guidelines of BS 100015.
Note:
All luminous intensity figures refer to the unmodified discrete LED.
How to Order:
website: www.marl.co.uk • email: [email protected]
•
Telephone +44 (0)1229 582430
•
Fax: +44 (0)1229 585155
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service.
for products or service.
Marl International reserve the right to alter without notice the specification or any conditions of supply
© MARL INTERNATIONAL LTD 2008 : DS 007/08
Issue 1
BS EN ISO 9001:2000
Approved Manufacturer
Page 2 of
3
DERATING INFORMATION
997
532, 930
501, 521
ALSO AVAILABLE
Part numbers also available in the 217 Series:
PART NO.
COLOUR
VOLTAGE DC
PART NO.
COLOUR
VOLTAGE DC
PART NO.
COLOUR
VOLTAGE DC
(Vdc) Vopr
(Vdc) Vopr
(Vdc) Vopr
217-501-22-65
Red
24Vdc
217-532-75-65
Green
110Vac
217-945-76-65
IR
230Vac
217-501-22-76
Red
24Vdc
217-532-76-55
Green
230Vac
217-945-76-83
IR
230Vac
217-501-23-65
Red
28Vdc
217-532-76-57
Green
230Vac
217-971-76-65
Green
230Vac
217-501-24-65
Red
48Vdc
217-532-76-65
Green
230Vac
217-993-75-65
Warm white
110Vac
217-501-25-65
Red
110Vdc
217-551-76-95
Red
230Vac
217-993-76-62
Warm white
230Vac
217-501-25-92
Red
110Vdc
217-551-76-96
Red
230Vac
217-993-76-63
Warm white
230Vac
217-501-25-93
Red
110Vdc
217-751-76-55
Red
230Vac
217-993-76-65
Warm white
230Vac
217-501-75-55
Red
110Vac
217-904-76-95
Red
230Vac
217-997-22-65
White
24Vdc
28Vdc
217-501-75-57
Red
110Vac
217-904-76-96
Red
230Vac
217-997-23-65
White
217-501-75-65
Red
110Vac
217-904-86-50
Red
115Vac
217-997-25-65
White
110Vdc
217-501-75-90
Red
110Vac
217-904-86-51
Red
115Vac
217-997-25-87
White
110Vdc
217-501-76-55
Red
230Vac
217-905-76-95
Orange
230Vac
217-997-75-63
White
110Vac
217-501-76-56
Red
230Vac
217-905-76-96
Orange
230Vac
217-997-75-65
White
110Vac
217-501-76-57
Red
230Vac
217-907-76-95
Green
230Vac
217-997-75-68
White
110Vac
217-501-76-62
Red
230Vac
217-907-76-96
Green
230Vac
217-997-76-55
White
230Vac
217-501-76-63
Red
230Vac
217-925-76-95
Yellow
230Vac
217-997-76-57
White
230Vac
217-501-76-65
Red
230Vac
217-925-76-96
Yellow
230Vac
217-997-76-62
White
230Vac
217-501-76-89
Red
230Vac
217-930-22-65
Blue
24Vdc
217-997-76-63
White
230Vac
217-509-76-65
Yellow
230Vac
217-930-23-65
Blue
28Vdc
217-997-76-65
White
230Vac
217-521-22-65
Yellow
24Vdc
217-930-76-55
Blue
230Vac
217-997-76-68
White
230Vac
White
125Vac
217-521-75-57
Yellow
110Vac
217-930-76-57
Blue
230Vac
217-997-77-65
217-521-76-63
Yellow
230Vac
217-930-76-65
Blue
230Vac
UNITS
217-521-76-65
Yellow
230Vac
217-940-76-55
IR
230Vac
217-521-77-65
Yellow
125Vac
217-940-76-57
IR
230Vac
217-532-22-65
Green
24Vdc
217-940-76-65
IR
230Vac
217-532-22-76
Green
24Vdc
217-940-76-95
IR
230Vac
217-532-25-65
Green
110Vdc
217-940-76-96
IR
230Vac
217-532-75-57
Green
110Vac
217-945-76-55
IR
230Vac
UNITS
UNITS
The products listed above illustrate all
of the options available to order. These
products may have custom
modifications that alter their operation
beyond the generic information
contained within this datasheet. Please
contact sales for further information.
How to Order:
website: www.marl.co.uk • email: [email protected]
•
Telephone +44 (0)1229 582430
•
Fax: +44 (0)1229 585155
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service.
for products or service.
Marl International reserve the right to alter without notice the specification or any conditions of supply
© MARL INTERNATIONAL LTD 2007 : DS 007/08
Issue 1
BS EN ISO 9001:2000
Approved Manufacturer
Page 3 of
3