Shenzhen KYL Communication Equipment Co., Ltd KYL-300H High Speed Data Radio Module Shenzhen KYL Communication Equipment Co., Ltd Address: C3705-3707, Huangdu Square, South of Exhibition Center, Yitian Road, Futian District, Shenzhen, Guangdong, China 518048 Tel: 86-755-82943662 Fax: 86-755-83408785 Skype：KYL-Sunny Yahoo messenger: [email protected] MSN: [email protected] Email: [email protected] Website: http://www.rf-data.com Fax: +86-755-82943662 [email protected] www.rf-data.com 1 Shenzhen KYL Communication Equipment Co., Ltd Before using our products, please read the user manual carefully. Any questions, please contact us at the above mentioned ways. . I. Features of KYL-300H 1. Low power transmission: 5W (default), 6W~7W (optional). 2. Carrier frequency: 433MHz (default), 400-470MHz (optional) 3. High anti- interference and Low BER (Bit Error Rate) Based on GFSK modulation, high-efficiency forward error correction channel encoding technology is used to ensure the data’s resistance against both transient interference and random interference. The actual BER can be achieved to 10-5~ 10-6 when channel BER is 10-2. 4. Long Transmission Distance Within the visible range, when the height of antenna is higher than 2m and the BER is 10-3, the reliable transmission distance is 10km @1200bps and 8km@9600bps respectively. 5. Transparent data transmission Transparent data interface used in transceivers is to satisfy many standard and nonstandard user protocols. Any false data generated in air can be filtrated automatically (What has been received is exactly what has been transmitted). 6. Multi-channels KYL-300H provides 8 channels, expandable for 16, 32 channels according to requirements of users. 7. 2 ports with three connection methods KYL-300H transceivers provide 2 ports with three connections: a UART interface of TTL level, a non-standard RS-232 port and a non-standard RS-485 port. 8. Big data buffer area With optional interface baud rates: 1200/4800/9600/19200bps and 8N1/8E1/8O1 data format (decide by user), the transceiver can transmit unlimited data frames with flexible user program. Note: the RF data rate is only settled down before delivery; please specify our sales your requirements when placing your orders. 9. Intelligent data control system and no other extra programs required Even for half duplex communication, no other excessive programs are required. All RF system data transmission/reception and other On-the-Fly conversion and control are performed by KYL-300H transceivers automatically. 10. Lower power consumption & nice sleep function With +12V power, the receiving current is less than 30mA, the transmitting current is less than 1.5A, and the sleeping current is less than 1mA. 11. High reliability, small size and excellent performance By using monolithic radio-frequency integrated circuit and single-chip MCU, the transceivers have less peripheral circuits, high reliability, and low failure rate. 12. Various options for configurable antennas. Fax: +86-755-82943662 [email protected] www.rf-data.com 2 Shenzhen KYL Communication Equipment Co., Ltd II. Applications of KYL-300H KYL-300H is suitable for: * Automatic Meter Reading (AMR); * Wireless alarm and security systems; * Building automation, security systems, wireless monitor, remote control and access control system; * Wireless data transmission, automatic data collection system; * Radio modem can be used for Sports training & competition; * Wireless dishes ordering; * Wireless POS, PDA wireless smart terminal; * RF module can be used for electronic bus station and intelligent traffics; * RF transmitter, Wireless electronic display screen and Queuing machine; * Wireless telemetry; charging for parking, parking lot; * Wireless modem automobile inspection and four-wheel orientation; * Wireless sensor, Industrial wireless remote control and air conditioning remote controller; * Data communication in the aspects of railway, oil field, dock and army. * LED display in thruway and public place; * Point to multi-point wireless network, wireless on-the-spot bus and automatic data collection system III. How to use KYL-300H KYL-300H can provides RS-232,RS-485 and TTL level interface port for direct connection with PC, RS485 devices, monolithic processors. The schematic diagram is shown below: 1. Power supply The factory default setting is +12, ±1.2V DC. By using better ripple factor, KYL-300H transceivers can also share power supply with other equipment. If possible, a voltage-stabilizing chip with 12V voltage is much more recommended than Switch power supply. But if only switch power supply available, the jam caused by switch pulse to the transceivers should be avoided. In addition, the reliable grounding must be used if there is other device in the system equipment. In case of failing to connect with the ground, it can form its own grounding but must be absolutely separated from the municipal electric supply. Fax: +86-755-82943662 [email protected] www.rf-data.com 3 Shenzhen KYL Communication Equipment Co., Ltd 2. Connection Definition with terminal KYL-300H transceivers supply one 9-pin connector (JP1), their definitions and connection methods with terminals are shown in Table 1. Table 1: JP1 Pin Definitions and connection methods Pin No. Signal Name Function Level Connection with terminal Ground 1 GND Grounding of power supply 2 Vcc Power supply DC 5V 3 RxD/TTL Serial data input to the transceiver TTL TxD 4 TxD/TTL TTL RxD 5 SGND Transmitted data out of the transceiver Signal 6 A (TXD) A of RS-485(TxD of RS-232) A(RxD) 7 B (RXD) B of RS-485(RxD of RS-232) B(TxD) 8 SLEEP Sleep control (input) TTL 9 RESET Reset signal(input) TTL Sleep signal Remarks High level sleep Negative pulse reset 3. The connection schematic diagram of KYL-300H transceivers with terminal. VCC 12V GND 9 1 4. Setting of channel, interface and data format: Before using KYL-300H, the user needs to make simple configuration based on its own needs to determine the channel, interface mode and data format. The user can change or view the module's interface baud rate, channel and address code. Fax: +86-755-82943662 [email protected] www.rf-data.com 4 Shenzhen KYL Communication Equipment Co., Ltd Parameter setting or reading as per the testing software KYLPRO.exe in the PC (in products box).And the configuration is as follows: i. Channel configuration: Channel No. Frequency Channel No. Frequency 1 429.0325MHZ 5 433.0325MHZ 2 430.0325MHZ 6 434.0325MHZ 3 431.0325MHZ 7 435.0325MHZ 4 432.0325MHZ 8 436.0325MHZ Note: the frequency points corresponding to each channel can be adjusted based on the user’s needs. 5. The Function-indicator light a. The LED indicator light will glitter red for 0.5S once after switched on. b. The LED indicator light will glitter green continually while receiving data from air. c. The LED indicator light will glitter red continuously when transmitting data into air after receiving from COM. d. If the module enables the sleep function, LED indicator light is always dark. 6. Supported protocol and Transmit capability KYL-300H standard transceivers offer transparent protocol to support various applications and protocols of users. If the user needs to decrease his cost or ease the workload of terminal CPU, we can add other specific functions based on the transparent protocol, such as addressing, data acquisition, command interpretation, etc. 7. Sleep function instruction: Due to reducing more consumption, KYL-300H transceivers support Sleep function. In sleep mode, the current consumption is less than 1mA. a. How to use the Sleep function: The Pin8 ‘SLP’ in JP1 is the signal of sleep control. In high power level, transceiver stays in working mode. In low power level (<0.5V), transceiver stays in sleep mode. The SLP signal can convert transceiver from working to sleep mode in 1ms after falling edge. If the Sleep signal arrives when the transceiver is transmitting data, the module will enter sleep mode after finishing transmission. From sleep mode to working, it takes the transceiver 1ms after rising edge. To disable the opened sleep function of KYL-300H, the SLP (SLEEP) pin should be definitely connected with 0 or ground. b. Attentions about use of sleep function: When the sleep function enabled, any supply glitches, such as switch dithering, fire striking or quick switching on and off, could cause the transceiver to be switched to the wrong sleep mode. After switching on, users can avoid this error by making a compulsive restoration once after the CPU delays 100ms. Sleep Timing Diagram: Fax: +86-755-82943662 [email protected] www.rf-data.com 5 Shenzhen KYL Communication Equipment Co., Ltd 8. The attentions of data transmission a. The delay time (tc) of conversion between transmitting and receiving is less than 1ms. Timing diagram: b. The delay time of transceivers between the first bit sent by TxD to the first bit received by RxD. Due to a data processing will be made on user’s data by KYL-300H transceiver using FEC (Forward Error Correction) or other correction algorithm, when RxD of a KYL-300H transceiver ‘A’ receives the data, then transmits it, the other one transceiver ‘B’ will have a delay (ts) to receive and transmit by TxD. Different RF data rate causes different delay time. Please see the specific delay time below: RF Date Rate (bps) 1200 Delay Ts(mS) 90 RF Date Rate (bps) 9600 Delay Ts(mS) 16 2400 48 19200 10 4800 30 Fax: +86-755-82943662 [email protected] www.rf-data.com 6 Shenzhen KYL Communication Equipment Co., Ltd Timing diagram: c. Error dealing procedure: To enhance the reliability and stability of user’s systems, a verify bit or a Cyclic Redundancy Check (CRC) mode is highly recommended to resent the wrong information while using KYL-300H modules. d. Large-number data transmission In theory, when the interface data rate is faster than the RF data rate, KYL-300H transceivers can sent unlimited-long data package, but any long packages more than 120B are not recommended. The length of each package should be between 60~100B. We also recommend user to resent the wrong information using Automatic Error Request Equipment (ARQ). The analyzing as below: What if the actual transmission BER (Bit Error Rate) is 10-4, 1 packet with 1KB data, which is about 10-thousand bits, is sent, theoretically, at least 1 bit will be received wrongly, then the 1KB information will never be received correctly. But if we package the data into 10 packets with 100B for each, when all 10 packets are sent, there will be only 1 packet wrong according to this probability. After that, resend this wrong packet using ARQ mode. So by resending one more packet and the efficiency rate is reduced 10%, all data will be absolutely received correctly. 9. Antenna configuration: Many appropriative antennas for low power RF modules are selected for meeting different user antenna configurations. Please ask our Sales office for further information about the antenna’s dimension and performance. a. Helical SMA antennas KYL-ANT-433-10-SMA: 100mm helical SMA antennas with high gain and low cost, reach a long distance. Fax: +86-755-82943662 [email protected] www.rf-data.com 7 Shenzhen KYL Communication Equipment Co., Ltd KYL-ANT-433-3-SMA: 28mm SMA helical antenna with magnetic core, small size, beautiful appearance (like the mobile phone antenna) KYL-ANT-433-10-ZSMA: 100mm SMA helical antenna with folding joint, easy for adjusting the direction and fixing. b. Magnetic vehicle antenna KYL-ANT-O433S-300H1.5-SMA: include magnetic antenna base, suitable for equipment with metal shell, easy for fixing, effective to enhance the transmission distance. More kinds of antennas please go to our website our website: http://www.rf-data.com/Products_list_en.asp?classid=163 If you have special demands on antennas, please specify, we can design and produce for you individually. IV. Network Application of KYL-300H The communication channel of KYL-300H is half duplex, which is most suitable for the communication mode of point to multi-point. Under this mode, one master station must be set, and all of the rest are slave stations. A unique address is given to each station. The coordination of communication is controlled by master station that uses data frames containing address code to transmit data or command. Slave station will receive all of the data and command and compare the received address code with local address code. If they are different, the data will be deserted without any response. If Fax: +86-755-82943662 [email protected] www.rf-data.com 8 Shenzhen KYL Communication Equipment Co., Ltd those address codes are the same, it means the data is sent to the local. Slave station will make different responses according to the transmitted data or command and send back the data of response. All these jobs must be performed by upper protocol, and it is assured that there is only one transmitter-receiver in the state of transmission in the communication network at any instant moment so as to avoid the cross-interference. KYL-300H can also be used for point-to-point communication with easier operation. For the programming of serial port, all you have to do is to remember that its communication mode is semi duplex while always observing the time sequence of come-and-go for receiving and transmitting. V. Technical specification of KYL-300H * Modulation mode: GFSK/FSK * Working frequency: 400MHz~470MHz * Power supply: DC 12V（±10%） * RF power: ≤5W; * RF data rate: 1200/2400/4800/9600/19200bps (Set before delivery); * Receive current: <30Ma (TTL connect); * Receive sensitivity: -123dBm (1200bps); -118dBm (9600bps); * Transmitting current: <1.5A; * Sleep current: <1mA; * Interface data format: 8E1/8N1/8O1; * Working temperature: -35~+75 (industrial) * RF Line-of-sight Range: 8km (BER=10-5@9600bps); 10km(BER=10-5@1200bps)； * Size: 85mm*58mm*16mm (without antenna port). VI. Description of type KYL-300H-96 Manufacture Fax: +86-755-82943662 Type Baud Rate 12:1200bps 24:2400bps 48:4800bps 96:9600bps 192:19200bps [email protected] www.rf-data.com 9