L-NS Vishay Thin Film Low Value (0.03 Ω to 10 Ω) Thin Film Chip Resistors FEATURES • Lead (Pb)-free or Sn/Pb terminations available Pb-free • Homogeneous nickel alloy film Available SURFACE MOUNT CHIPS • No inductance for high frequency application RoHS* COMPLIANT • Alumina substrates for high power handling capability (2 W max power rating) • Pre-soldered or gold terminations Actual Size 0805 • Epoxy bondable termination available With extremely low resistances and high power capabilities, VISHAY’s proven and unique ultra-low value resistors can be used in your hybrid or surface mount applications. These resistors are available with solderable or weldable terminations. TYPICAL PERFORMANCE ABS TCR 300 TOL 1.0 CONSTRUCTION VALUE AND MINIMUM TOLERANCE Passivation Resistor Film Solder coating Nickel barrier High Purity Alumina Adhesion layer VALUE (Ω) MINIMUM TOLERANCE 0.1 ± 2.0 % 0.25 ± 1.0 % 0.5 ± 1.0 % 1.0 ± 1.0 % 2.0 ± 1.0 % 10.0 ± 1.0 % < 0.1 20 % STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS Case Sizes CONDITIONS 0505, 0705, 0805, 1005, 1020, 1206, 1505, 2010, 2515 0.03 Ω to 10.0 Ω Resistance Range Absolute TCR ± 300 ppm/°C Noise - 55 °C to + 125 °C < - 30 dB typical Power Rating up to 2.0 W at + 70 °C (Resistor values beyond ranges shall be reviewed by the factory) CASE SIZE 0505 0705 0805 1005 1020 1206 1505 2010 2512 Power Rating - mW 125 200 200 250 1000 330 500 1000 2000 Min. Resistance - Ω 0.05 0.10 0.10 0.15 0.03 0.10 0.25 0.17 0.18 Max. Resistance - Ω 5.0 6.0 6.0 10.0 3.0 10.0 10.0 10.0 10.0 * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 58 For technical questions, contact: [email protected] Document Number: 60027 Revision: 31-Jul-08 L-NS Low Value (0.03 Ω to 10 Ω) Thin Film Chip Resistors Vishay Thin Film DIMENSIONS in inches and millimeters D W T L SIZE L CASE SIZE W INCHES ± 0.005 0.050 0.050 0.050 0.200 0.063 0.050 0.100 0.125 T mm ± 0.13 1.27 1.27 1.27 5.08 1.60 1.27 2.54 3.18 MAX. 0.020 0.020 0.030 0.030 0.030 0.030 0.030 0.030 Nickel Alloy Alumina Pre-soldered or gold 96.5 % Sn, 3.0 % Ag, 0.5 % Cu Hot Solder Dip 0.51 0.51 0.76 0.76 0.76 0.76 0.76 0.76 Precent of Rated Power 100 ENVIRONMENTAL TEST 1 Ω ΔR ± % 0.06 0.06 0.03 0.05 0.35 0.35 0.40 ± 235 ppm/°C TEST Thermal Shock Short Term Overload Low Temperature Operation Resistance to Solder Heat Moisture Resistance High Temp. Exposure Load Life (2000 h at + 70 °C) TCR D INCHES mm + 0.010/- 0.005 + 0.25/- 0.13 0.016 0.41 0.021 0.53 0.021 0.53 0.015 0.38 0.020 0.51 0.021 0.53 0.019 0.48 0.019 0.48 mm DERATING CURVE MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Terminals Lead (Pb)-free Option Lead (Pb)-free Finish INCHES 80 60 40 20 0 0 70 125 150 Ambient Temperature °C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: L-1206M1R00GBT1 (preferred part number format) L - 1 2 0 6 GLOBAL MODEL CASE SIZE TCR CHARACTERISTICS OHMIC VALUE L- = Low value wraparound chip resistor 0505 0805 1005 1020 1206 1505 2010 2512 M = 300 ppm/°C N = 350 ppm/°C O = 400 ppm/°C P = 500 ppm/°C First 3 digits are significant figures and the last digit specifies the number of zeroes to follow. “R” designates the decimal point. Example: 0R10 = 0.1 Ω 1R60 = 1.6 Ω M 1 R 0 0 G B T 1 TOLERANCE TERMINATION PACKAGING F=1% G=2% H=3% J=5% K = 10 % L = 20 % B = Wraparound Sn/Pb solder 63 % Sn/37 % Pb w/ nickel barrier G = Wraparound Au over Ni (gold) termination epoxy bondable RoHS compliant - e4 W = Top side wire bondable Au (gold) RoHS compliant - e4 S = Wraparound lead (Pb)-free solder 96.5 % Sn/3.0 % Ag/0.5 % Cu RoHS compliant - e1 BS = BULK 100 Min 1 Mult WS = WAFFLE 100 Min 1 Mult TAPE AND REEL T0 = 100 Min 100 Mult T1 = 1000 Min 1000 Mult T3 = 300 Min 300 Mult T5 = 500 Min 500 Mult TF = Full Reel TS = 100 Min 1 Mult Historical Part Number example: L1206M1R00HBT (will continue to be accepted) L 1206 M 1R00 H B T STYLE CASE SIZE TCR CHARACTERISTICS OHMIC VALUE TOLERANCE TERMINATION PACKAGING Document Number: 60027 Revision: 31-Jul-08 For technical questions, contact: [email protected] www.vishay.com 59 SURFACE MOUNT CHIPS INCHES mm + 0.010/- 0.005 + 0.25/- 0.13 0505 0.050 1.27 0805*, 0705* 0.075 1.91 1005 0.100 2.54 1020 0.100 2.54 1206 0.126 3.20 1505 0.150 3.81 2010 0.200 5.08 2512 0.250 6.35 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1