SWITCH L722RAS Ip68/ nema 250 (6p) sealed power plug and jack Datasheet

New Product Bulletin 583
Switchcraft
®
Sealed Power Plugs and Jacks
IP68/ NEMA 250 (6P) Sealed Power Plug and Jack
Applications:
Outdoor power supplies where a
weather resistant connection is needed
● Medical equipment where the power
plug would need to be water proof
● Lighting connections where a rugged
harsh environment connector would
provide the most reliable sealed
connection
●
Key Features:
IP rating of IP68/ NEMA 250 (6P),
for properly mated Switchcraft sealed
jack and plug, makes the device perfect
for harsh environments
● Available in multiple pin diameters
● Automatic switch over from AC to DC
permitted by sleeve shunt spring
● Optional IP rated cap (JCAP) protects
Jack when not in use
● 5A current rating (carry), up to 30V DC
at 65˚C
● Overmold options available
● Color coded plug finger
●
Switchcraft®
Harsh Environment
Connectivity Solutions
switchcraft.com
Made In USAU
SAMade in
5555 N. Elston, Chicago, IL 60630
773-792-2700 - [email protected]
New Product Bulletin 583
Switchcraft
®
Sealed Power Plugs and Jacks
Switchcraft®
Harsh Environment
Connectivity Solutions
switchcraft.com
Made In USAU
2
SAMade in
5555 N. Elston, Chicago, IL 60630
773-792-2700 - [email protected]
New Product Bulletin 583
Switchcraft
®
Sealed Power Plugs and Jacks
Switchcraft®
Harsh Environment
Connectivity Solutions
switchcraft.com
Made In USAU
3
SAMade in
5555 N. Elston, Chicago, IL 60630
773-792-2700 - [email protected]
Sealed Power Plugs and Jacks
Power Jack - Specifications
Power Plug - Specifications
Features:
- IP66, IP67, IP68 / NEMA 250 (6P) when mated
- Automatic switch over from AC to DC permitted
by sleeve shunt spring
- Split center pin shaped to hold mating plug firmly
- Right Angle versions offer “kinked” PC terminals
for board retention
- Optional IP rated cap (JCAP) protects jack
when not in use
Features:
- IP66, IP67, IP68 / NEMA 250 (6P) when mated
- Hollow center pin available in 3 pin diameters (2.5mm,
2.1mm, 2.0mm)
- Locking ring provides security in critical applications
- Sleeve terminal serves as cord clamp
- Handle/Boot with cable strain relief
Materials:
Housing: Rigid thermoplastic
Bushing: Plated copper alloy, with assembled &
lubricated o-ring
Terminals: Plated copper alloy
Insulators: Rigid Thermoplastic
Hardware: Supplied with one nickel plated copper
alloy hex nut (P1489), one nickel plated steel flat
washer (P3031) and one o-ring for sealing jack
to panel
Plug Sleeve and Pin: Plated copper alloy
Lock Ring: Plated copper alloy
Lock Ring Thread Size: 7/16-32 UN2B thread
Finger Insulator: Rigid thermoplastic
Insulating Washer: Rigid thermoplastic
Sleeve Terminal: Plated copper alloy, electro-tinned
Handle: Rigid thermoplastic overmolded with
thermoplastic elastomer
Handle Thread Size: 5/16-24 UNF 2A
Electrical: Current (carry) 5A at 65˚C
Specifications:
Electrical:
Current Rating (carry): 5A, up to 30V DC at 65˚C
Contact Resistance: 0.01 Ohms max (initial), 0.02
Ohms (after humidity, durability exposure), 0.10
Ohms max. (after salt spray)
Insulation Resistance: 10,000 Mohms min. (initial),
1,000 Mohms (after humidity, durability exposure)
Dielectric Withstanding Voltage: 500VAC max.
Overmold Option
Seal Cap - Specifications
Features:
- IP66, IP67, IP68 / NEMA 250 (6P)
when mated
Material:
Thermoplastic Elastomer
Switchcraft®
Harsh Environment
Connectivity Solutions
switchcraft.com
Made In USAU
4
SAMade in
5555 N. Elston, Chicago, IL 60630
773-792-2700 - [email protected]
New Product Bulletin 583
Switchcraft
®
Similar pages