LANCW5 Series Single and Dual Output 5 Watt DC/DC Converter 2:1 and 4:1 Wide Input Voltage Rev. B APPLICATIONS FEATURES ● Wireless Network ● Five-Sided Shielding ● Telecom/Datacom ● 5 Watts Output power ● Industry Control System ● High Efficiency up to 84% ● Measurement Equipment ● Standard 1.25 x 0.8 x 0.4 Inches ● Semiconductor Equipment ● Fixed Switching Frequency (300KHz) ● 2:1 and 4:1 Ultra Wide Input Voltage Range ● Compliant to RoHS EU Directive 2002/95/EC ● UL60950-1, EN60950-1, and IEC60950-1 Licensed ● Standard 24 Pin DIP Package and SMT Type Package ● CE Mark meets 2006/95/EC, 93/68/EEC, and 2004/108/EC SPECIFICATIONS: LANCW5 Series All specifications apply @ 25°C ambient unless otherwise noted INPUT SPECIFICATIONS GENERAL SPECIFICATIONS (CONTINUED) Input Voltage Range LANCW5 ........................ 12V nominal input ............................9-18Vdc 24V nominal input .........................18-36VDC 48V nominal input ........................ 36-75VDC LANCUW5...................... 24V nominal input ...........................9-36VDC 48V nominal input .........................18-75VDC Isolation Resistance ...............................................................10 ohms min. Input Filter ....................................................................................... Pi Type Input Surge Voltage (100ms max) ...... 12V input ...........................36VDC 24V input ...........................50VDC 48V input .........................100VDC Input Reflected Ripple Current (nominal Vin and full load) ...........20mAp-p Start Up Time (nominal Vin and constant resistive load) ...........450ms typ. 9 Isolation Capacitance ................................................................ 300pF max. ENVIRONMENTAL SPECIFICATIONS Operating Temperature Standard .................................................. -25°C to +85°C (w/ derating) “I” (See notes 6 & 9) ............................. -40°C to +85°C (w/o derating) “I” (UW Series)......................................... -40°C to +85°C (w/ derating) Storage Temperature .......................................................... -55°C ~ +105°C Maximum Case Temperature ................. Standard ......................... +100°C “I” suffix ............................ +105°C Relative Humidity (non-condensing) .....................................5% to 95% RH OUTPUT SPECIFICATIONS Thermal Impedance (Natural Convection) ................................. 20°C / Watt Output Voltage ..............................................................................see table Thermal Shock ..................................................................... MIL-STD-810F Voltage Accuracy (nominal Vin and full load) ...................................... ±1% Vibration ................................10~55Hz, 10G, 30 minutes along X, Y, and Z Output Current ..............................................................................see table MTBF (See Note 1) ........BELLCORE TR-NWT-000332...... 3.165 x 10 hrs 6 MIL-HDBK-217F........................... 1.631 x 10 hrs Output Power .......................................................................... 5 watts max. 6 Line Regulation (LL to HL at FL)....................................................... ±0.2% PHYSICAL SPECIFICATIONS Load Regulation (no load to full load) ...... Single Output................. ±0.5% Dual Output ....................... ±1% Weight ....................................DIP .......................................... 16g (0.55 oz) SMT......................................... 18g (0.63 oz) Cross Regulation (Dual) (Asymmetrical load 25% / 100% FL) ............ ±5% Dimensions................... 1.25 x 0.80 x 0.40 inches (31.8 x 20.3 x 10.2 mm) Minimum Load ....................................................................................... 0% Case Material ..............................................................Nickel-coated copper Ripple/Noise (20 MHz BW) .......................................................... 50mVp-p Base Material...................................................Non-conductive black plastic Temperature Coefficient ................................................. ±0.02% / °C max. Potting material..................................................................Epoxy (UL94-V0) Transient Response Recovery Time (25% load step) ...................... 200us Shielding..................................................................................... five – sided PROTECTION SPECIFICATIONS SAFETY & EMC Over Load Protection (% of full load at nominal input)................ 170% typ. Approvals and Standards .................. IEC60950-1, UL60950-1, EN60950-1 Short Circuit Protection .............................Continuous, automatic recovery EMI .....................................EN55022 .............................................. Class A GENERAL SPECIFICATIONS ESD ..... EN61000-4-2………. Efficiency.......................................................................................see table Radiated Immunity..............EN61000-4-3............... 10V/m Perf. Criteria A Switching Frequency................................................................300KHz typ. Fast Transient.....................EN61000-4-4................. ±2KV Perf. Criteria B Isolation Voltage Input to Output ............................................................. 1600VDC min. Input (Output) to Case (DIP) ........................................ 1600VDC min. Input (Output) to Case (SMT)....................................... 1000VDC min. Surge (See Note 7).............EN61000-4-5................ .±1KV Perf. Criteria B Air ± 8KV ………………Perf. Criteria A Contact ± 6KV Conducted Immunity...........EN61000-4-6............ 10 Vrms Perf. Criteria A Due to advances in technology, specifications subject to change without notice Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 LANCW5 Series Single and Dual Output 5 Watt DC/DC Converter 2:1 and 4:1 Wide Input Voltage Rev. B OUTPUT VOLTAGE / CURRENT RATING CHART Model Number LANC1233W5 LANC1205W5 LANC1212W5 LANC1215W5 LANC1205DW5 LANC1212DW5 LANC1215DW5 LANC2433W5 (UW) LANC2405W5 (UW) LANC2406UW5 LANC2412W5 (UW) LANC2415W5 (UW) LANC2405DW5 (UW) LANC2412DW5 (UW) LANC2415DW5 (UW) LANC24833W5 (UW) LANC4805W5 (UW) LANC4812W5 (UW) LANC4815W5 (UW) LANC4805DW5 (UW) LANC4812DW5 (UW) LANC4815DW5 (UW) Input Range Output Voltage Output Current Ripple & Noise (4) 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 9 – 36 VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 18 – 36 (9 – 36) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 36 – 75 (18 – 75) VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 6 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ±5 VDC ±12 VDC ±15 VDC 1000mA 1000mA 470mA 400mA ±500mA ±230mA ±190mA 1000mA 1000mA 833mA 470mA 400mA ±500mA ±230mA ±190mA 1000mA 1000mA 470mA 400mA ±500mA ±230mA ±190mA 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p 50mVp-p Input Current No Load(3) Full Load(2) 10mA 10mA 10mA 10mA 15mA 20mA 15mA 10mA(5mA) 15mA(10mA) 15mA(5mA) 15mA(10mA) 15mA(10mA) 20mA(10mA) 20mA(10mA) 10mA(5mA) 10mA(10mA) 10mA(10mA) 10mA(10mA) 10mA(10mA) 5mA(10mA) 10mA(10mA) 382mA 563mA 603mA 649mA 563mA 597mA 594mA 194mA (191mA) 285mA (278mA) 278mA 305mA (305mA) 325mA (312mA) 274mA (282mA) 288mA (295mA) 308mA (297mA) 98mA (100mA) 143mA (138mA) 151mA (155mA) 162mA (160mA) 141mA (145mA) 147mA (151mA) 150mA (156mA) Eff (4) (%) Capacitor(5) Load max 76 78 82 81 78 81 84 75 (76) 77 (79) 79 81 (81) 81 (84) 80 (78) 84 (82) 81 (84) 74 (73) 77 (79) 82 (80) 81 (82) 78 (76) 82 (80) 83 (80) 2200uF 1000uF 220uF 150uF ± 680uF ± 100uF ± 68uF 2200uF 1000uF 690uF 220uF 150uF ± 680uF ± 100uF ± 68uF 2200uF 1000uF 220uF 150uF ± 680uF ± 100uF ± 68uF NOTES BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. MIL-HDBK-217F Notice2 @ Ta=25°C, Full load (Ground, benign, controlled environment). 2. Maximum value at nominal input voltage and full load of standard type. 3. Typical value at nominal input voltage and no load. 4. Typical value at nominal input voltage and full load. 5. Test by minimum Vin and constant resistive load. 6. The industrial I suffix for 2:1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard and I suffix 4:1 input versions. 7. An external filter capacitor is required if the module has to meet EN61000-4-5. The filter capacitor Wall Industries suggests: Nippon chemi-com KY Series, 220µF/100V, ESR 48mΩ. 8. There is no pin at PIN10 & PIN15 for LANC5UW Series. 9. For industrial temperature range add “I” suffix to the part number. 10. For SMT Type add “S” suffix to the part number. 1. EFFICIENCY (%) -40 -25 -10 5 20 35 50 65 70.1 80 AMBIENT TEMPERATURE(℃) 83 81 79 77 75 73 71 LANC4805W5 Efficiency VS Input Voltage 36 40 44 48 52 56 60 64 68 72 INPUT VOLTAGE (V) “I” Version 95 105 110 EFFICIENCY(%) 120 100 80 60 40 20 0 FKC05-48S05 Derating Curve LANC4805W5 DERATING CURVE “I” Version O U T P U T P O W E R (% ) DERATING CURVE & EFFICIENCY GRAPHS 90 85 80 75 70 65 60 55 50 45 40 LANC4805W5 Efficiency VS Output Load 10 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 LANCW5 Series Single and Dual Output 5 Watt DC/DC Converter 2:1 and 4:1 Wide Input Voltage Rev. B MECHANICAL DRAWING SMT TYPE DIP TYPE (add suffix “S”) Pin size is 0.02 (0.5) Dia or 0.01 x 0.02 (0.25 x 0.50) Rectangular Pin 5 0.02(0.5) VIEW 9 10 11 0.600 (15.24) BOTTOM 1.26 (32.0) 16 15 14 20 1 0.15 (3.8) Pin Area 0.04 x 0.02 (1.0 x 0.5) 0.40 (10.2) 0.80 (20.3) 16 9 13 12 0.80(20.3) 0.25 (6.4) BOTTOM VIEW 24 0.200 (5.08) 2 3 0.700 (17.78) 1.25 (31.8) 23 22 0.43(10.9) 0.15 (3.8) 0.92(23.4) 0.18 (4.6) 0.44(11.2) 0.100 (2.54) 1.00(25.4) 1. All dimensions are in inches (mm) Tolerance: XX.XX ±0.02 (X.X±0.5) XX.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01 (0.25) 3. Pin dimension tolerance ±0.004 (0.1) (DIP) PIN CONNECTION (SMT) PIN CONNECTION PIN 2 3 SINGLE -INPUT -INPUT DUAL -INPUT -INPUT PIN 23 22 SINGLE +INPUT +INPUT DUAL +INPUT +INPUT PIN 2 3 SINGLE -INPUT -INPUT 9 10 11 NC NC (Note 8) NC COMMON NC (Note 8) -OUTPUT 16 15 14 -OUTPUT NC (Note 8) +OUTPUT COMMON NC (Note 8) +OUTPUT 9 10 11 Others NC NC NC NC DUAL -INPUT -INPUT PIN 23 22 COMMON 16 NC 15 -OUTPUT 14 NC Others Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 SINGLE +INPUT +INPUT DUAL +INPUT +INPUT -OUTPUT COMMON NC NC +OUTPUT +OUTPUT NC NC