Cree® 5-mm Round LED Model # LC503UHR1-30P-A Data Sheet 30-degree, 5-mm round LED lamp in red color with water-transparent lens and stopper Applications • • • • Advertising Signs Indicators Traffic Lights Automotive Lighting Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit IF 50 mA IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 130 mW Operation Temperature Topr -40 ~ +95 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Max. 260°C for 3 sec. max. (3 mm from the base of the epoxy bulb) Electrostatic Discharge Classification(MIL-STD-883E) ESD Class 2 Forward Current Peak Forward Current Note Note: Pulse width ≤0.1 msec, duty ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Symbol Forward Voltage VF Reverse Current IR Dominant Wavelength Luminous Intensity 2 IF = 20 A VR = 5 V Unit Minimum V Typical Maximum 2.1 2.6 A 100 D IF = 20 mA nm 618 624 IV IF = 20 mA mcd 3000 5100 ½H-H IF = 20 mA deg 630 30 D-CT038 Data Sheet: CL 50% Power Angle Condition Subject to change without notice. www.cree.com/ledlamps Standard Bins for LC503UHR1-30P-A (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( ) bins shown. D Orders for LC503UHR1-30P-A may be filled with any or all bins contained as below. Luminous Intensity (IV) All luminous intensity (IV) and dominant wavelength ( ) values shown and specified are at IF = 20 mA. D Z or above 8200 mcd Y 5860 mcd X 4180 mcd W 3000 mcd 618 nm 630 nm Dominant Wavelength ( ) D Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous intensity is ±15%. 4. Tolerance of measurement of dominant wavelength is ±1 nm. 5. Tolerance of measurement of VF is ±0.05 V. 6. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 7. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 8. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT038.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps Document No. SPE/LC503UHR1-30Q-A Rev. No. 03 GraphsGraphs -50 -60 If (mA) 100.0 -40 -20 -30 -10 0.0 Vr(V) 80.0 -10.0 60.0 -20.0 40.0 -30.0 20.0 -40.0 0.0 1.8 2.0 2.2 2.4 2.6 2.8 FIG.1 FORWARD CURRENT VS. Vf(V) Ir(uA) -50.0 FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. FORWARD VOLTAGE. Half Power WL=23nm Domi WL= 624nm 5.0 4.0 100% 3.0 75% 2.0 50% 1.0 25% If(mA) 0.0 0.0 20.0 40.0 60.0 WL(nm) 500 600 700 800 900 FIG.4 RELATIVE LUMINOUS INTENSITY VS. 0% 400 80.0 100.0 FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT. 100 WAVELENGTH. IF(mA) 50% Power Angle : 30 80 Ie(%) 0 100% 60 80% 40 60% 20 40% 0 0.0 20.0 40.0 60.0 0% 80.0 100.0 -60 -90 FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=105 C) Items 20% Ta( C) -30 0 30 60 90 FIG.6 FAR FIELD PATTERN Signatures Date Revision History Prepared by WangFJ 2007-09-21 Rev. No Checked by WangDW 2007-09-21 02 2007-07-06 Release. IV from V,W,X,Y(typ)4200 to W,X,Y(typ)5100mcd. Approved by David 2007-09-21 03 2007-09-21 Add ESD rank Date Change Description © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the FCN# Copyright FCN20070234 Cree logo are registered trademarks of Cree, Inc. Data is subject to CLD-CT038.000 change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps Mechanical Dimensions Document No. SPE/LC503UHR1-30P-A Rev. 01noted. All dimensions are in mm. Tolerance is ±0.25 mm No. unless otherwise An epoxy meniscus may extend about 1.5 mm down the leads. Dimension Drawing Burr around bottom of epoxy may be 0.5 mm max. C ute maximum Rating Unit 50 mA 200 mA 5 V 130 mW 0 ~ + 95 °C 0 ~ +100 °C 260°C Notes for 3 sec Max. the base of the epoxy bulb) RoHS Compliance Class II The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. s between 10mA and 30mA are recommended. Please contact COTCO recommended drive conditions. Vision Advisory Claim 25°Cbe) cautioned not to stare at the light of this LED product. The bright light can damage the eye. stics ( Users Ta =should Condition Min. Typ. Max. Unit Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. IF = 20mA --- CLD-CT038.000 2.1 2.6 V Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color 1: Full-color distribution 2~9, A~Z . . . : special request * aaaaaaaaa-aaa-aa- x x x x x IV 0: Full luminous intensity distribution 1~9, A~Z . . . :special request * Packing type 0: Standard = Bulk pack 1~9, A~Z . . . : special request * Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LC503UHR1-30Q-A-00001 Description 5mm Round 30 Red, Full Rank, Bulk Pack * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CLD-CT038.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/ledlamps