LIGITEK LDGL63033-L28-LTS Round type led lamp Datasheet

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
ROUND TYPE LED LAMPS
LDGL63033/L28-LTS
DATA SHEET
DOC. NO :
QW0905-LDGL63033/L28-LTS
REV.
:
A
DATE
:
23 - Feb. - 2006
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LDGL63033/L28-LTS
Page 1/4
Package Dimensions
5.1
5.8
4.92
7.85 8.85
1.5
MAX
25MIN
□0.5
TYP
1.0MIN
2.54TYP.
+
-
Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted.
2.Specifications are subject to change without notice.
Directivity Radiation
0°
-30°
30°
-60°
100% 75% 50%
60°
25%
0
25% 50% 75% 100%
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LDGL63033/L28-LTS
Page 2/4
Absolute Maximum Ratings at Ta=25 ℃
Ratings
Parameter
Symbol
UNIT
DGL
Forward Current
IF
30
mA
Peak Forward Current
Duty 1/10@10KHz
IFP
100
mA
Power Dissipation
PD
120
mW
Ir
50
μA
Electrostatic Discharge( * )
ESD
150
V
Operating Temperature
Topr
-20 ~ +80
℃
Storage Temperature
Tstg
-30 ~ +100
℃
Soldering Temperature
Tsol
Reverse Current @5V
Max 260 ℃ for 5 sec Max
(2mm from body)
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
* glove
is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
Typical Electrical & Optical Characteristics (Ta=25 ℃)
PART NO
MATERIAL
COLOR
Emitted
Forward
Dominant Spectral
voltage
wave
halfwidth
@20mA(V)
length
△λ nm
λDnm
@20mA(mcd)
Viewing
angle
2θ 1/2
(deg)
Typ. Max. Min. Typ.
Lens
LDGL63033/L28-LTS InGaN/GaN Green Water Clear
Luminous
intensity
505
32
3.5
Note : 1.The forward voltage data did not including ±0.1V testing tolerance.
2. The luminous intensity data did not including ±15% testing tolerance.
4.0
6200 11500
20
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LDGL63033/L28-LTS
Page 3/4
Typical Electro-Optical Characteristics Curve
DGL CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
3.0
Relative Intensity
Normalize @20mA
Forward Current(mA)
1000
100
10
1.0
2.5
2.0
1.5
1.0
0.5
0.0
0.1
2.0
1.0
3.0
4.0
5.0
1.0
10
Fig.3 Forward Voltage vs. Temperature
Fig.4 Relative Intensity vs. Temperature
1.2
3.0
Relative Intensity@20mA
Normalize @25℃
Forward Voltage@20mA
Normalize @25℃
1000
Forward Current(mA)
Forward Voltage(V)
1.1
1.0
0.9
0.8
-40
-20
0
20
40
60
80
100
Fig.5 Relative Intensity vs. Wavelength
1.0
0.5
0.0
450
500
550
Wavelength (nm)
2.5
2.0
1.5
1.0
0.5
0.0
-40
-20
0
20
40
60
80
Ambient Temperature( ℃)
Ambient Temperature( ℃)
Relative Intensity@20mA
100
600
100
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 4/4
PART NO. LDGL63033/L28-LTS
Reliability Test:
Test Item
Test Condition
Description
Reference
Standard
Operating Life Test
1.Under Room Temperature
2.If=20mA
3.t=1000 hrs (-24hrs, +72hrs)
This test is conducted for the purpose
of detemining the resistance of a part
in electrical and themal stressed.
MIL-STD-750: 1026
MIL-STD-883: 1005
JIS C 7021: B-1
High Temperature
Storage Test
1.Ta=105 ℃±5 ℃
2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance of
the device which is laid under condition
of high temperature for hours.
MIL-STD-883:1008
JIS C 7021: B-10
Low Temperature
Storage Test
1.Ta=-40 ℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance
of the device which is laid under
condition of low temperature for hours.
High Temperature
High Humidity Test
1.Ta=65 ℃±5℃
2.RH=90 %~95 %
3.t=240hrs ±2hrs
The purpose of this test is the resistance
of the device under tropical for hours.
Thermal Shock Test
1.Ta=105 ℃±5 ℃&-40 ℃±5℃
(10min) (10min)
2.total 10 cycles
The purpose of this is the resistance of
the device to sudden extreme changes
in high and low temperature.
MIL-STD-202: 107D
MIL-STD-750: 1051
MIL-STD-883: 1011
Solder Resistance
Test
1.T.Sol=260 ℃±5℃
2.Dwell time= 10 ±1sec.
This test intended to determine the
thermal characteristic resistance
of the device to sudden exposures
at extreme changes in temperature
when soldering the lead wire.
MIL-STD-202: 210A
MIL-STD-750: 2031
JIS C 7021: A-1
Solderability Test
1.T.Sol=230 ℃±5℃
2.Dwell time=5 ±1sec
This test intended to see soldering well
performed or not.
MIL-STD-202: 208D
MIL-STD-750: 2026
MIL-STD-883: 2003
JIS C 7021: A-2
JIS C 7021: B-12
MIL-STD-202:103B
JIS C 7021: B-11
Similar pages