Filters for Communication Equipment for RF/Local Chip Multilayer LC Filters (BPF) o LFB18/21/2H/31_SG Series 0.6±0.1 +0.2 +0.10 (2) 0.8 -0.1 (4) 0.15±0.10 (1) 0.30-0.15 0.25±0.15 Frequency Characteristics 1.6±0.1 A 0 0 10 10 20 20 30 30 40 40 50 50 60 60 Attenuation (dB) 0.15±0.10 0.45±0.15 0.70±0.15 (1)(3) : GND (2) : OUT (4) : IN LFB18_SG Series 70 A : Directional Input Mark 0.8 4.8 8.8 Return Loss (dB) (3) 70 Frequency Range (GHz) All the technical data and information contained herein are subject to change without prior notice. (in mm) Frequency Characteristics 0.95±0.10 2.00±0.15 A 0.20±0.15 1.6+0.10 -0.15 (1)(3) : GND (2) : OUT (4) : IN 0 10 20 20 30 30 40 40 50 50 60 60 70 70 80 80 90 A : Directional Input Mark 0.5 2.5 3.0 90 Frequency Range (GHz) All the technical data and information contained herein are subject to change without prior notice. (in mm) 0.3±0.2 Frequency Characteristics (4) 1.5±0.1 (2) 0 10 20 20 30 30 40 40 50 50 60 60 A : Directional Input Mark 70 70 (1)(3) : GND (2) : OUT (4) : IN 80 80 0.5±0.2 (3) +0.15 0.30 -0.20 0 10 LFB2H_SG6 Series 90 1.0 * All the technical data and information contained herein are subject to change without prior notice. (in mm) 3.5 6.0 Return Loss (dB) (1) Attenuation (dB) A 2.0±0.2 2.5±0.2 0.75±0.20 Filters for Communication Equipment 7 LFB21_SG Series 0 10 Return Loss (dB) +0.1 0.3-0.2 Attenuation (dB) +0.10 0.3 -0.15 (3) +0.1 (2) 0.3 -0.2 (4) 1.25±0.10 (1) 90 Frequency Range (GHz) (2) Attenuation (dB) (3) +0.15 0.30-0.20 (1)(3) : GND (2) : OUT (4) : IN LFB2H_SG7 Series 0 5 20 10 30 15 40 20 50 25 60 30 70 35 80 40 90 A : Directional Input Mark All the technical data and information contained herein are subject to change without prior notice. 0 10 1.0 3.5 6.0 Return Loss (dB) (4) 0.9±0.1 2.0±0.2 (1) 0.5±0.2 0.75±0.20 A 0.3±0.2 The Characteristics of Spurious 2.5±0.2 45 Frequency Range (GHz) (in mm) Continued on the following page. !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.12.25 Filters for Communication Equipment Continued from the preceding page. Frequency Characteristics 1.2±0.1 3.2±0.15 A : Directional Input Mark (1) (3) : GND (2) : OUT (4) : IN LFB31_SG1 Series 0 0 10 10 20 20 30 30 40 40 50 50 60 60 70 1100 * All the technical data and information contained herein are subject to change without prior notice. (in mm) 1600 Return Loss (dB) Attenuation (dB) (3) 1.9±0.15 0.3±0.2 0.65±0.2 0.55±0.2 (2) 1.6±0.15 (4) 0.5±0.15 0.3±0.2 (1) A 70 2100 Frequency Range (MHz) 1.3±0.1 Directional Input Mark (3) 0.3±0.2 0.65±0.20 (2) 0.3±0.2 (4) 1.60±0.15 (1) Attenuation (dB) 0.50±0.15 0.55±0.20 3.20±0.15 1.90±0.15 (1) GND (2) OUT (3) GND (4) IN (in mm) LFB31_SG2 Series All the technical data and Information contained herein are subject to change without prior notice. 0 0 10 10 20 20 30 30 40 40 50 50 60 60 70 70 80 1.2 80 1.8 Return Loss (dB) Frequency Characteristics 2.4 Frequency Range (GHZ) (2) (4) 0.3T0.2 (3) 0.3T0.2 0.65T0.20 1.90T0.15 Attenuation (dB) 1.60T0.15 (1) (1)(3) : GND (2) : OUT (4) : IN (in mm) LFB31_SG3 Series All the technical and Information contained herein are subject to change without prior notice. 0 0 10 10 20 20 30 30 40 40 50 50 60 60 70 1.0 70 3.0 2.0 Frequency Range (GHz) Return Loss (dB) 0.50T0.15 1.1T0.1 3.20T0.15 Directional Input Mark Filters for Communication Equipment 7 Frequency Characteristics Frequency Characteristics 3.20±0.15 0.9±0.1 LFB31_SG7 Series 1.90±0.15 1.60±0.15 (1)(3) : GND (2) : OUT (4) : IN (in mm) All the technical data and information contained herein are subject to change without prior notice. 0 0 10 10 20 20 30 30 40 40 50 50 60 60 70 1.95 2.45 Return Loss (dB) 0.65±0.20 0.3±0.2 Attenuation (dB) (3) Directional Input Mark 0.3±0.2 (2) (4) 0.50±0.15 (1) 70 3.95 Frequency Range (GHz) !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.12.25 Filters for Communication Equipment Part Number Nominal Center Bandwidth (BW) Frequency (fo) (MHz) (MHz) Insertion Loss in BW (dB) Attenuation (Absolute Value) I) (dB) Attenuation (Absolute Value) II) (dB) 2450 fo±50 2.2 max. (at 25°C) 24.5 min. at 880~960MHz 12.5 min. at 1710~1990MHz LFB185G78SGAB713 5787.5 fo±62.5 2.2 max. (at 25°C) 16.5 min. at 4800MHz 23.5 min. at 11450~11700MHz LFB211G90SG8B704 1906.5 fo±13.5 3.0 max. (at 25°C) 20 min. at 1660.5~1686.3MHz 11 min. at 2126.8~2152.6MHz LFB212G45SG8A127 2450 fo±50 1.5 max. (at 25°C) 25 min. at 1200~1300MHz 10.0 min. at 2000MHz LFB212G45SG8A166 2450 fo±50 1.4 max. (at 25°C) 30 min. at 880~915MHz 30 min. at 1710~1910MHz LFB212G45SG8A192 2450 fo±50 2.6 max. (at 25°C) 40 min. at 880~960MHz 38 min. at 1710~1990MHz LFB215G12SG8A178 5125 fo±225 1.5 max. (at 25°C) 25 min. at 4200MHz 17 min. at 2x(fo±225)MHz LFB215G12SG8A183 5125 fo±225 1.5 max. (at 25°C) 10.0 min. at 4250MHz 10.0 min. at 5900MHz LFB215G25SG8A144 5250 fo±100.0 1.5 max. (at 25°C) 30 min. at 3450MHz - LFB215G37SG8A180 5375 fo±475 1.8 max. (at 25°C) 29.5 min. at 500~4000MHz 34.5 min. at 3450MHz LFB215G37SG8A185 5375 fo±475 2.2 max. (at 25°C) 40 min. at 340~1195MHz 21 min. at 2140~3580MHz LFB215G51SG8A132 5512 fo±363 1.9 max. (at 25°C) 30 min. at 500~4000MHz 20 min. at 4600MHz LFB215G51SG8A154 5512 fo±363 1.5 max. (at 25°C) 30 min. at 500~4000MHz 20 min. at 4600MHz LFB215G78SG8A170 5787.5 fo±62.5 2.2 max. (at 25°C) 35 min. at 3275~3400MHz 37 min. at 2x(fo±62.5)MHz LFB2H1G90SG6A157 1906.5 fo±13.5 1.5 max. (at 25°C) 14 min. at 1687MHz 6 min. at 2126MHz LFB2H2G45SG7A134 2450 fo±50 1.7 max. (at 25°C) 25 min. at 1750MHz 25 min. at 2100MHz LFB2H2G45SG7A135 2450 fo±50 2.7 max. (at 25°C) 40 min. at 880~915MHz 40 min. at 1710~1950MHz LFB2H2G45SG7A158 2450 fo±50 1.2 max. (at 25°C) 30 min. at 880~915MHz 30 min. at 1710~1785MHz LFB2H2G45SG7A159 2450 fo±50 2.1 max. (at 25°C) 45 min. at 880~915MHz 48 min. at 1710~1990MHz LFB2H2G45SG7A204 2450 fo±50 3 max. (at 25°C) 45 min. at 880~915MHz 27 min. at 1710~1990MHz LFB2H5G78SG7A175 5787.5 fo±62.5 2.5 max. (at 25°C) 51.5 min. at 902~928MHz 41 min. at 3919~4044MHz LFB311G48SG1-985 1489 fo±12.0 1.5 max. (at 25°C) 25 min. at (fo±12.0)+260MHz 28 min. at 1749MHz LFB311G90SG1-799 1906.5 40 min. at 1397.05~1422.85MHz 35 min. at 1645.5~1671.3MHz LFB311G90SG2-797 1906.5 fo±13.5 2.7 max. (at 25°C) 40 min. at 1427~1454MHz 35 min. at 1660~1687MHz 7 LFB311G95SG3A564 1950 fo±30 3.5 max. (at 25°C) 20 min. at 2110~2170MHz 25 min. at 2490~2550MHz Filters for Communication Equipment LFB182G45SG9A246 LFB312G45SG2A509 2450 fo±50 2 max. (at 25°C) 38 min. at 902~928MHz 15 min. at 2100~2200MHz LFB312G45SG7A572 2450 fo±50 2.5 max. (at 25°C) 37 min. at 902~928MHz 20 min. at 2100~2200MHz fo +24.5/-13.5MHz 2.5 max. (at 25°C) o LFB31_SL Series (1206) Frequency Characteristics 3.2±0.15 1.1±0.1 (4) (7) (6) Attenuation (dB) (8) +0.1 (5) 0.25 -0.15 0.35±0.15 0.45±0.15 +0.1 1.0±0.1 0.25 -0.15 0.5±0.1 (1)(3)(5)(7) : (2)(6) : (4) : (8) : NC GND OUT IN * All the technical data and information contained herein are subject to change without prior notice. (in mm) Part Number LFB311G40SL1A562 Nominal Center Bandwidth (BW) Frequency (fo) (MHz) (MHz) 1402.5 fo±77.5 0 0 10 10 20 20 30 30 40 40 50 50 60 60 70 0.65 1.4 Frequency Range (GHz) Return Loss (dB) (3) 0.5±0.1 (2) 1.6±0.15 (1) 70 2.15 Insertion Loss in BW (dB) Attenuation (Absolute Value) I) (dB) Attenuation (Absolute Value) II) (dB) 3 max. (at 25°C) 20 min. at 1005~1080MHz 20 min. at 1725~1760MHz !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.12.25 Filters for Communication Equipment o LFB31_SN Series (1206) Frequency Characteristics 3.20±0.15 1.2±0.1 0.3±0.2 1.90±0.15 (1)(3) : GND (2) : OUT (4) : IN (in mm) 0 0 10 10 20 20 30 30 40 40 50 50 60 60 70 3.0 8.0 Frequency Range (GHz) All the technical data and information contained herein are subject to change without prior notice. Nominal Center Bandwidth (BW) Frequency (fo) (MHz) (MHz) 5820 fo±30 Insertion Loss in BW (dB) Attenuation (Absolute Value) I) (dB) Attenuation (Absolute Value) II) (dB) 2 max. (at 25°C) 35 min. at 2000MHz 30 min. at 3000MHz o LFB31_SP Series (1206) Directional Input Mark (2) 0.25±0.15 (3) 0.25±0.15 0.95±0.15 (4) 1.60±0.15 (1) 1.35±0.20 0.50±0.15 (1) IN (2) GND (3) OUT (4) GND * All the technical data and Information contained herein are subject to change without prior notice. (in mm) Part Number Nominal Center Bandwidth (BW) Frequency (fo) (MHz) (MHz) Attenuation (dB) 1.3±0.1 0.325±0.200 Frequency Characteristics 3.20±0.15 0 0 10 10 20 20 30 30 40 40 50 50 60 60 70 0 70 3.0 1.5 Frequency Range (GHz) Insertion Loss in BW (dB) Attenuation (Absolute Value) I) (dB) Attenuation (Absolute Value) II) (dB) LFB311G89SP1A542 1890 fo±10.0 0.85 max. (at 25°C) 29 min. at 1416.9~1436.9Hz 22 min. at 900MHz LFB311G90SP1-798 1906.5 fo±13.5 1.0 max. (at 25°C) 38 min. at 1405~1440MHz 12.0 min. at 1649~1680MHz LFB312G45SP1A502 2450 fo±50 1.4 max. (at 25°C) 20 min. at 902~928MHz 35 min. at 1500~1550MHz o LFB32_SB Series (1210) 7 Filters for Communication Equipment LFB315G82SN5-996 70 13.0 Return Loss (dB) Part Number Return Loss (dB) 0.65±0.20 0.3±0.2 (3) Directional Input Mark Attenuation (dB) 1.60±0.15 (2) (4) 0.50±0.15 (1) Frequency Characteristics 3.2±0.2 (1) 0 Attenuation (dB) (2) 2.5±0.2 (3) 1.5±0.2 0.3±0.2 (4) 0.8±0.2 0.4±0.3 1.2±0.3 10 20 30 40 50 (1) : IN (2) : GND (3) : OUT (4) : GND (in mm) 60 70 900 1900 Frequency (MHz) 2900 !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.12.25 Filters for Communication Equipment Part Number Nominal Center Bandwidth (BW) Frequency (fo) (MHz) (MHz) Insertion Loss in BW (dB) Attenuation (Absolute Value) I) (dB) Attenuation (Absolute Value) II) (dB) 20 min. at 2xfo MHz LFB321G66SB1-560 1662 fo±12.5 2 max. (at 25°C) 27 min. at 1895~1918MHz LFB321G89SB1-591 1890 fo±10.0 1.2 max. (at 25°C) 21 min. at 1655~1675MHz 15 min. at 2xfo MHz LFB321G90SB1-559 1907.5 fo±12.5 1.0 max. (at 25°C) 35 min. at 1397.5~1440MHz 20 min. at 1646~1680MHz o LFB32_SC Series (1210) Frequency Characteristics 1.5±0.15 3.2±0.2 (2) (3) (8) 2.5±0.2 (4) (7) (6) 10 Attenuation (dB) 0.7±0.2 (1) (5) 0.4±0.2 (1) : NC (2) : GND (3) : NC (4) : OUT 1.0±0.2 0.1 min. 0.55±0.15 0.45±0.15 Nominal Center Bandwidth (BW) Frequency (fo) (MHz) (MHz) 30 40 50 60 (5) : NC (6) : GND (7) : NC (8) : IN 70 80 50 * Terminal of "NC" should not be connected to any pattern. (in mm) Part Number 20 300 Frequency (MHz) 550 Insertion Loss in BW (dB) Attenuation (Absolute Value) I) (dB) Attenuation (Absolute Value) II) (dB) 284 fo±4 3.8 max. (at 25°C) 31 min. at 220~228MHz 23 min. at 340~348MHz LFB32312MSC1-597 312.25 fo±1.0 3.5 max. (at 25°C) 26 min. at 249.8MHz 26 min. at 374.7MHz LFB32315MSC1-604 315 fo±0.5 3.5 max. (at 25°C) 45 min. at 180MHz 29 min. at 470MHz 7 LFB32315MSC1-619 315 fo±0 3.5 max. (at 25°C) 30 min. at 235MHz 30 min. at 395MHz Filters for Communication Equipment LFB32284MSC1-596 LFB32426MSC1-603 426.5 fo±0.5 3.6 max. (at 25°C) 25 min. at 366.5MHz 20 min. at 486.5MHz LFB32820MSC2-749 820 fo±10.0 1.3 max. (at 25°C) 22 min. at 1070~1090MHz - LFB32847MSC2-766 847.5 fo±37.5 1.5 max. (at 25°C) 16 min. at 550~625MHz 15 min. at 1070~1145MHz o LFB32_SJ Series (1210) Frequency Characteristics 3.2±0.2 1.5±0.2 (3) 0.4±0.3 0.4min. 0.8±0.2 1.2±0.3 (1) : IN (2)(4) : GND (3) : OUT * All the technical data and information contained herein are subject to change without prior notice. (in mm) Part Number LFB321G47SJ1-794 Nominal Center Bandwidth (BW) Frequency (fo) (MHz) (MHz) 1472 fo±20 0 0 10 10 20 20 30 30 40 40 50 50 60 70 1.1 Return Loss (dB) Attenuation (dB) (2) 2.5±0.2 (4) 0.3±0.2 (1) 60 70 2.1 1.6 Frequency Range (GHz) Insertion Loss in BW (dB) Attenuation (Absolute Value) I) (dB) Attenuation (Absolute Value) II) 1.3 max. (at 25°C) 30 min. at 1172MHz - !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.12.25 Filters for Communication Equipment o LFB32_SK Series (1210) Frequency Characteristics 1.5±0.15 3.2±0.2 (7) 0.55±0.15 0.1min. (6) Attenuation (dB) (4) (8) (5) 0.3±0.2 0.45±0.15 0.3±0.2 1.0±0.2 (1)(3)(5)(7) : (2)(6) : (4) : (8) : NC GND OUT IN Nominal Center Bandwidth (BW) Frequency (fo) (MHz) (MHz) LFB32205MSK1-948 205.5 fo±31.5 0 10 20 20 30 30 40 40 50 50 60 60 70 0 * All the technical data and information contained herein are subject to change without prior notice. (in mm) Part Number 0 10 Return Loss (dB) (3) 2.5±0.2 (2) 0.7±0.2 (1) 70 510 255 Frequency Range (MHz) Insertion Loss in BW (dB) Attenuation (Absolute Value) I) (dB) Attenuation (Absolute Value) II) (dB) 1.5 max. (at 25°C) 10.0 min. at 100MHz 20 min. at 500MHz o LFB32_SN Series (1210) Frequency Characteristics 1.5±0.1 3.2±0.2 0.3±0.15 (1) : GND (2) : OUT (3) : GND (4) : IN (in mm) Part Number Nominal Center Bandwidth (BW) Frequency (fo) (MHz) (MHz) 0 10 20 20 30 30 40 40 50 50 60 60 70 1.0 3.5 Frequency Range (GHz) 7 70 6.0 Insertion Loss in BW (dB) Attenuation (Absolute Value) I) (dB) Attenuation (Absolute Value) II) (dB) LFB321G74SN1-770 1747.5 fo±37.5 2.5 max. (at 25°C) 20 min. at D.C.~1350MHz 30 min. at 1350~1425MHz LFB321G84SN1-796 1842.5 fo±37.5 2.5 max. (at 25°C) 48 min. at 500~1450MHz 40 min. at 1450~1480MHz LFB321G90SN1-593 1907.5 fo±12.5 2.5 max. (at 25°C) 40 min. at 1406.5~1440MHz 35 min. at 1655~1680MHz LFB322G45SN1-947 2450 fo±50 2.5 max. (at 25°C) 40 min. at 1950MHz 16 min. at 2200MHz LFB322G45SN1A504 2450 fo±50 1.8 max. (at 25°C) 48 min. at 902~928MHz 50 min. at 1500~1550MHz LFB322G45SN5A515 2450 fo±50 2.5 max. (at 25°C) 40 min. at 880~1250MHz 20 min. at 1250~1710MHz !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Filters for Communication Equipment (3) 0 10 Return Loss (dB) (2) Attenuation (dB) 2.5±0.2 (4) 0.4±0.2 0.6±0.2 (1) 06.12.25 Filters for Communication Equipment for RF/Local Chip Multilayer LC Filters (LPF) o LFL15_TC (0402) /LFL18_TC (0603) /LFL21_TC (0805) Series 1.00±0.05 A Frequency Characteristics 0.4 max. 0.10±0.05 0.35±0.10 0.3±0.1 (1)(3) : GND (2) : OUT (4) : IN LFL15_TC Series 0 0 10 5 20 10 30 15 40 20 50 25 60 30 70 35 80 40 90 A : Directional Input Mark 2.35 4.95 7.55 Return Loss (dB) (3) Attenuation (dB) (2) 0.3±0.1 0.10±0.05 (4) 0.50±0.05 (1) 45 Frequency Range (GHz) All the technical data and information contained herein are subject to change without prior notice. (in mm) Frequency Characteristics 0.6±0.1 (2) (3) (6) (5) (4) 0.20 +0.10 -0.15 0.3±0.1 0.2±0.1 0.50±0.05 LFL18_TC Series A : Pin 1 Marking (1) : (2)(4)(6) : (3) : (5) : IN GND OUT NC 0 0 10 10 20 20 30 30 40 40 50 50 60 60 70 0.5 All the technical data and Information contained herein are subject to change without prior notice. (in mm) 70 3.0 1.75 Frequency Range (GHz) Frequency Characteristics (8) (4) (7) +0.1 0.3 -0.15 0.20±0.15 (6) (5) +0.1 0.3 -0.2 0.35±0.1 0.65±0.05 Attenuation (dB) Directional Input Mark +0.1 0.3 -0.2 (1)(3)(5)(7) : GND (2)(6) : NC (4) : OUT (8) : IN LFL21_TC Series Part Number Terminal of "NC" should be fixed to no connected pattern. * All the technical data and information contained herein are subject to change without prior notice. (in mm) Nominal Center Bandwidth (BW) Frequency (fo) (MHz) (MHz) 0 0 10 10 20 20 30 30 40 40 50 50 60 70 0.1 Return Loss (dB) 0.95±0.10 2.00±0.15 (1) (2) (3) 1.25±0.10 +0.1 0.3 -0.15 Filters for Communication Equipment 7 Attenuation (dB) 0.8±0.1 (1) Return Loss (dB) A 0.15±0.10 1.6±0.1 60 70 5.1 2.15 Frequency Range (GHz) Insertion Loss in BW (dB) Attenuation (Absolute Value) I) (dB) Attenuation (Absolute Value) II) (dB) 21 min. at 3x(fo±50.0)MHz LFL152G45TC1A219 2450 fo±50 0.45 max. (at 25°C) 21 min. at 2x(fo±50.0)MHz LFL18815MTC2A072 815.5 fo±9.5 0.80 max. (at 25°C) 35 min. at 2x(fo±9.5)MHz 30 min. at 3x(fo±9.5)MHz LFL18924MTC1A052 924.5 fo±35 0.40 max. (at 25°C) 20 min. at 2x(fo±35.0)MHz 15 min. at 3x(fo±35.0)MHz LFL182G45TC1A108 2450 fo±50 0.37 max. (at 25°C) 27 min. at 4800~5000MHz 25 min. at 7200~7500MHz LFL182G45TC1A202 2450 fo±50 0.40 max. (at 25°C) 27 min. at 4800~5000MHz 30 min. at 7200~7500MHz LFL21600MTC1A002 600 fo±250 1.37 max. (at 25°C) 20 min. at 1550~4250MHz 9 min. at 1100MHz LFL21847MTC1A006 847.5 fo±37.5 0.75 max. (at 25°C) 30 min. at 2x(fo±37.5)MHz 30 min. at 3x(fo±37.5)MHz LFL21902MTC1A018 902.5 fo±12.5 0.6 max. (at 25°C) 30 min. at 2x(fo±12.5)MHz 30 min. at 3x(fo±12.5)MHz LFL211G35TC1A001 1350.0 fo±250 0.92 max. (at 25°C) 25 min. at 2300~5000MHz - LFL211G44TC1A014 1441.0 fo±12.0 0.47 max. (at 25°C) 31 min. at 2xfoMHz 26 min. at 3xfoMHz LFL211G79TC1A011 1795 fo±85 0.47 max. (at 25°C) 30 min. at 2x(1747.5±37.5)MHz 25 min. at 2x(1842.5±37.5)MHz LFL211G89TC1A015 1890 fo±10.0 0.47 max. (at 25°C) 30 min. at 2x(fo±10.0)MHz 26 min. at 3x(fo±10.0)MHz LFL211G90TC1A008 1907.5 fo±12.5 0.47 max. (at 25°C) 30 min. at 2x(fo±12.5)MHz 25 min. at 3x(fo±12.5)MHz Continued on the following page. !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.12.25 Filters for Communication Equipment Continued from the preceding page. Part Number Nominal Center Bandwidth (BW) Frequency (fo) (MHz) (MHz) Insertion Loss in BW (dB) Attenuation (Absolute Value) I) (dB) Attenuation (Absolute Value) II) (dB) LFL211G92TC1A060 1920 fo±70 0.6 max. (at 25°C) 24 min. at 3335~3700MHz 30 min. at 3700~3820MHz LFL212G45TC1A007 2450 fo±50 0.50 max. (at 25°C) 27 min. at 2x(fo±50.0)MHz 30 min. at 3x(fo±50.0)MHz LFL215G25TC1A156 5250 fo±100.0 0.70 max. (at 25°C) 24 min. at 2x(fo±100)MHz 19 min. at 3x(fo±100)MHz LFL215G37TC1A210 5375 fo±475 0.70 max. (at 25°C) 30 min. at 2x(fo±475)MHz 20 min. at 3x(fo±475)MHz LFL215G51TC1A149 5512 fo±363 0.70 max. (at 25°C) 30 min. at 2x(fo±363)MHz 20 min. at 3x(fo±363)MHz LFL215G78TC1A155 5787.5 fo±62.5 0.70 max. (at 25°C) 30 min. at 2x(fo±62.5)MHz 20 min. at 3x(fo±62.5)MHz for RF/Local Chip Multilayer LC Filters (HPF) o LFH32_RA Series (1210) Frequency Characteristics 3.2±0.2 (5) 0.4±0.2 0.1min. 0.45±0.15 1.0±0.2 (1)(3)(5)(7) : NC (2)(6) : GND (4) : OUT (8) : IN 0.55±0.15 (in mm) 0 0 10 10 20 20 30 30 40 40 50 50 60 60 70 Terminal of "NC" should not be fixed to any pattern. All the technical data and Information contained herein are subject to change without prior notice. Part Number Nominal Center Bandwidth (BW) Frequency (fo) (MHz) (MHz) LFH32942MRA1A517 942.5 fo±17.5 200 700 1200 70 7 Frequency Range (MHz) Insertion Loss in BW (dB) Attenuation (Absolute Value) I) (dB) Attenuation (Absolute Value) II) (dB) 0.5 max. (at 25°C) 4.5 min. at 480~600MHz 25 min. at 480MHz for RF/Local 2.0±0.15 (1) 0.95±0.1 (3) Directional Input mark (8) +0.10 0.30-0.15 (2) (7) (6) (5) (3) +0.10 +0.1 0.3 -0.2 0.15±0.10 0.65±0.15 0.30-0.15 (4) +0.1 0.3 -0.15 0.2±0.15 A : Directional Input Mark 0.35±0.1 0.65±0.05 (1) : GND (2) : P1 (*1) (3) : P3 (*2) (4) : P2 (*3) (*1) Higher Frequency Port (*2) Common Port (*3) Lower Frequency Port LFD18_DP Series All the technical data and information contained herein are subject to change without prior notice. +0.1 0.6±0.1 0.3 -0.15 +0.2 (2) 0.8 -0.1 (4) 0.15±0.10 (1) 0.3 +0.1 -0.2 1.6±0.1 A 1.25±0.1 0.25±0.15 Chip Multilayer Diplexers Filters for Communication Equipment (6) (7) (4) Attenuation (dB) Directional Input mark (8) Return Loss (dB) (3) 2.5±0.2 (2) 0.4±0.2 0.7±0.2 (1) 1.5±0.15 (1)(2)(3)(5)(7) : GND (4) : P1 (6) : P3 (∗) (8) : P2 (∗) Common Port LFD21_DP Series All the technical data and information contained herein are subject to change without prior notice. (in mm) (in mm) Part Number Frequency Range[P1](f1) (MHz) Frequency Range[P2](f2) (MHz) Insertion Loss [P1-P3](in f1) (dB) Insertion Loss [P2-P3](in f2) (dB) Attenuation [P1-P3](in f2) (dB) Attenuation [P2-P3](in f1) (dB) LFD182G45DP3A299 5375 ±475.0MHz 2450 ±50.0MHz 0.60 max. (at 25°C) 0.40 max. (at 25°C) 20 min. 20 min. LFD212G45DP3A140 5250 ±100.0MHz 2450 ±50.0MHz 0.65 max. (at 25°C) 0.50 max. (at 25°C) 20 min. 20 min. LFD212G45DP3A151 5487.5 ±337.5MHz 2450 ±50.0MHz 0.75 max. (at 25°C) 0.50 max. (at 25°C) 20 min. 16 min. LFD212G45DP3A188 5375 ±475.0MHz 2450 ±50.0MHz 0.75 max. (at 25°C) 0.50 max. (at 25°C) 21 min. 17 min. LFD212G45DP4A189 2450 ±50.0MHz 5375 ±475.0MHz 0.5 max. (at 25°C) 0.75 max. (at 25°C) 17 min. 21 min. Continued on the following page. !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.12.25 Filters for Communication Equipment Continued from the preceding page. Part Number Frequency Range[P1](f1) (MHz) Frequency Range[P2](f2) (MHz) Insertion Loss [P1-P3](in f1) (dB) Insertion Loss [P2-P3](in f2) (dB) Attenuation [P1-P3](in f2) (dB) Attenuation [P2-P3](in f1) (dB) LFD21859MDP1A049 LFD21859MDP2A076 1920 ±70.0MHz 859 ±35.0MHz 0.45 max. (at 25°C) 0.40 max. (at 25°C) 19 min. 20 min. 859 ±35.0MHz 1920 ±70.0MHz 0.40 max. (at 25°C) 0.45 max. (at 25°C) 20 min. LFD21874MDP1A084 19 min. 1575.5 ±3.0MHz 874 ±51.0MHz 0.60 max. (at 25°C) 0.55 max. (at 25°C) 25 min. 23 min. LFD21874MDP2A181 874 ±51.0MHz 1575.5 ±3.0MHz 0.55 max. (at 25°C) 0.60 max. (at 25°C) 23 min. 25 min. LFD21884MDP1A062 1906.5 ±13.0MHz 884 ±74.0MHz 0.45 max. (at 25°C) 0.50 max. (at 25°C) 20 min. 20 min. LFD21892MDP1A141 1850 ±140.0MHz 892 ±68.0MHz 0.60 max. (at 25°C) 0.40 max. (at 25°C) 19 min. 17 min. LFD21892MDP2B860 892 ±68.0MHz 1850 ±140.0MHz 0.40 max. (at 25°C) 0.60 max. (at 25°C) 17 min. 19 min. LFD21920MDP1A048 1795 ±85.0MHz 920 ±40.0MHz 0.55 max. (at 25°C) 0.50 max. (at 25°C) 20 min. 16 min. for RF/Local Chip Multilayer LC Filters (Trap) 2.0±0.15 (2) 0.50±0.25 (1) 1.25±0.15 0.95±0.15 Input Terminal Marking 0.25±0.20 (1) : IN (2) : OUT (in mm) Part Number Center Frequency of Rejection Band (MHz) Pass Bandwidth (BW) (MHz) Insertion Loss in BW (dB) Attenuation (Absolute Value) (dB) LFE21560MHA1A004 560 810~885 0.7 max. (at 25°C) 10.0 min. at 550~570MHz for RF/Local Chip Multilayer LC Filters (Balanced Filters) 0.3 -0.15 (2) (3) (4) (7) (6) (5) +0.1 0.3 -0.2 +0.1 (8) 0.90±0.10 1.25±0.10 (1) +0.10 2.00±0.15 A 0.3 -0.2 Filters for Communication Equipment 7 +0.10 0.30 -0.15 0.35±0.10 0.65±0.05 0.20±0.15 A : Directional Input Mark (1) : NC (2) : NC (DC feed Port) (3) : Unbalance Port (4)(6)(8) : GND (5)(7) : Balance Port LFB21_BA Series * All the technical data and information contained herein are subject to change without prior notice. (in mm) Part Number Nominal Center Bandwidth Frequency (fo) (BW) (MHz) (MHz) Insertion Loss in BW (dB) Balance Impedance (Differential) (Nom.) (ohm) Unbalance Impedance (Nom.) (ohm) LFB212G45BA1A220 2450.00 fo±50.00 3.5 max. (at 25°C) 34.2 -j95.0ohm (Differential) Source Impedance 50 LFB212G45BA1A234 2450.00 fo±50.00 3.5 max. (at 25°C) 50 50 LFB212G45BA1B763 2450.00 fo±50.00 3.5 max. (at 25°C) 50 +j50ohm (Differential) Source Impedance 50 LFB215G37BA1A233 5375.00 fo±475.00 2.8 max. (at 25°C) 100 50 !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.12.25 Filters for Communication Equipment for RF/Local SAW Filters o GPS 2.5 ± 0.2 1.0 max. Marking : Laser Printing ∗ : EIAJ Code (1) : Input (3)(4) : Output Others : Ground 2-0.25±0.05 (1) (C0.3) SAFSE1G57KC0T00 5-0.25±0.05 2-0.25±0.05 R2-0.12 (2) (in mm) Center Frequency (MHz) Insertion Loss (dB) SAFEB1G57KB0F00 1575.42 0.8 max. (1574.22MHz~1576.62MHz) SAFEB1G57KA0F00 1575.5 1.5 max. (1574MHz~1577MHz) SAFEB1G57FM0F00 1575.42 2.3 max. (1574.22MHz~1576.62MHz) SAFEB1G57FL0F00 1575.42 2.7 max. (1574.42MHz~1576.42MHz) SAFSE1G57KC0T00 1575.5 2.5 max. (1574MHz~1577MHz) 0.7 (1574MHz~1577MHz) SAFSD1G57FA0T00 1575.5 1.6 max. (1574MHz~1577MHz) SAFSE1G57KA0T05 1575.5 1.6 max. (1574MHz~1577MHz) SAFSE1G57KA0T09 1575.42 2 max. (1574.42MHz~1576.42MHz) (0.50) 4-0.88 ± 0.15 2-0.74 ± 0.10 (4) Marking : Laser Printing ∗ : EIAJ Code Pin (1) : Input (3) : Output Others : Ground (3) (in mm) Input Impedance Output Impedance 50ohm 50ohm 50ohm 50ohm 0.6 1.5max. (1574.22MHz~1576.62MHz) (1574.22MHz~1576.62MHz) 50ohm 100ohm 0.5 1.7max. (1574.42MHz~1576.42MHz) (1574.42MHz~1576.42MHz) 50ohm 200ohm 1.6max (1574MHz~1577MHz) 50ohm 50ohm 0.5 (1574MHz~1577MHz) 1.6max. (1574MHz~1577MHz) 50ohm 100ohm 0.7 (1574MHz~1577MHz) 1.6max. (1574MHz~1577MHz) 50ohm 50ohm 50ohm 50ohm Ripple (dB max.) VSWR 0.5 2.0max. (1574.22MHz~1576.62MHz) (1574.22MHz~1576.62MHz) 0.6 (1574MHz~1577MHz) 1.8max. (1574MHz~1577MHz) 1.5 1.8max. (1574.42MHz~1576.42MHz) (1574.42MHz~1576.42MHz) 7 Filters for Communication Equipment (5) (4) (0.25) 2-0.74 ± 0.10 4-0.63 ± 0.15 (0.075) 2-0.25±0.05 5-0.325±0.050 (2) (3) (0.05) Part Number ∗ 4-1.25 ± 0.15 (1) SAFEB1G57KB0F00 M R4-0.15 (0.20) 0.6 max. ∗ Dot Marking(ø0.4) 2.0 ± 0.2 1.05±0.05 1.35±0.05 Dot Marking (ø0.3) o GSM850 1.05±0.05 (0.05) (5) (4) 2-0.25±0.05 Marking : Laser Printing ∗ : EIAJ Code (1) SAFED881MFL0F05 (0.075) 5-0.25±0.05 2-0.25±0.05 (0.20) 0.6 max. (1) : Input (3)(4) : Output Others : Ground (2) (3) (0.075) Marking : Laser Printing ∗ : EIAJ Code 2-0.35±0.05 5-0.45±0.05 (0.075) 2-0.25±0.05 5-0.325±0.050 (2) (3) ∗ (0.20) 0.6 max. ∗ (1) SAFEB881MFL0F00 Dot Marking (ø0.3) 1.4±0.1 2.0±0.1 1.35±0.05 Dot Marking (ø0.3) 2-0.325±0.050 (in mm) (5) (4) (1) : Input (3)(4) : Output Others : Ground 5-0.40±0.05 2-0.325±0.050 (in mm) Center Frequency (MHz) Insertion Loss (dB) Ripple (dB max.) VSWR Input Impedance Output Impedance SAFEB881MFL0F00 881.5 2.3 max. (869MHz~894MHz) 1.2 (869MHz~894MHz) 1.8max. (869MHz~894MHz) 50ohm 150ohm//82nH SAFED881MFL0F05 881.5 2.0 max. (869MHz~894MHz) 1.1 (869MHz~894MHz) 1.8max. (869MHz~894MHz) 50ohm 150ohm//68nH Part Number Continued on the following page. !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.12.25 Filters for Communication Equipment Continued from the preceding page. Center Frequency (MHz) Insertion Loss (dB) Ripple (dB max.) VSWR Input Impedance Output Impedance SAFEH881MFM0F00 881.5 2.4 max. (869MHz~894MHz) 1.5 (869MHz~894MHz) 1.9max. (869MHz~894MHz) 50ohm 150ohm//82nH SAFEF881MAL0F00 881.5 2.6 max. (869MHz~894MHz) 1.4 (869MHz~894MHz) 1.7max. (869MHz~894MHz) 50ohm 50ohm SAFSD881MFL0T50 881.5 3 max. (869MHz~894MHz) 1.4 (869MHz~894MHz) 2max. (869MHz~894MHz) 50ohm 200ohm//82nH Part Number o GSM850/GSM900 Dual Band 2.0±0.1 M ∗ Filters for Communication Equipment 7 (0.075) (9) (8) (7) (6) 6-0.27±0.05 8-0.26±0.05 Marking : Laser Printing ∗ : EIAJ Code (1) : Input (4) : Input (8)(9) : Output (6)(7) : Output Others : Ground (C0.15) (1) (2) (3) (4) SAWES881MCQ0F00(942.5) 2-0.70±0.05 (10) 8-0.325±0.050 8-0.40±0.05 (0.075) (5) 4-0.27±0.05 SAWEP881MCQ0F00(942.5) 2-0.26±0.05 0.65±0.05 (C0.15) (10) 8-0.325±0.050 (1) (2) (3) (4) (5) Marking : Laser Printing ∗ : EIAJ Code 4-0.35±0.05 (0.20) 0.6 max. 0.45±0.05 (0.2) 0.6 max. Dot Marking (ø0.3) 2-0.35±0.05 ∗ 2.0±0.1 2.5±0.1 1.6±0.1 Dot Marking (ø0.3) Pin (1) : Input (4) : Input (8)(9) : Output (6)(7) : Output Others : Ground (9) (8) (7) (6) 6-0.35±0.05 (in mm) (in mm) Part Number Center Frequency (MHz) Insertion Loss (dB) Ripple (dB max.) VSWR Input Impedance Output Impedance SAWEP881MCQ0F00(881.5) 881.5 2.0 max. (869MHz~894MHz) 1.1 (869MHz~894MHz) 2.0max. (869MHz~894MHz) 50ohm 150ohm//82nH SAWEP881MCQ0F00(942.5) 942.5 2.4 max. (925MHz~960MHz) 1.5 (925MHz~960MHz) 2.1max. (925MHz~960MHz) 50ohm 150ohm//82nH SAWEP881MCP0F00(881.5) 881.5 2.0 max. (869MHz~894MHz) 1.1 (869MHz~894MHz) 2.0max. (869MHz~894MHz) 50ohm 150ohm//82nH SAWEP881MCP0F00(942.5) 942.5 2.4 max. (925MHz~960MHz) 1.5 (925MHz~960MHz) 2.1max. (925MHz~960MHz) 50ohm 150ohm//82nH SAWES881MCQ0F00(881.5) 881.5 2.1 max. (869MHz~894MHz) 1.0 (869MHz~894MHz) 1.9max. (869MHz~894MHz) 50ohm 150ohm//68nH SAWES881MCQ0F00(942.5) 942.5 2.9 max. (925MHz~960MHz) 1.7 (925MHz~960MHz) 2.2max. (925MHz~960MHz) 50ohm 150ohm//56nH o GSM850/GSM1900 Dual Band 2.0±0.1 Dot Marking (ø0.4) M ∗ (0.2) 0.6 max. ∗ (0.44) (0.19) 0.9 max. M Dot Marking (ø0.3) R4-0.15 2.5±0.2 3.0±0.2 2.5±0.1 SAWES881MCU2F00(881.5) 8-0.325±0.050 (5) (9) (8) (7) (6) 6-0.35±0.05 (1) : Input (4) : Input (8)(9) : Output (6)(7) : Output Others : Ground (in mm) SAWSP881MGA0T00(881.5) (1) (8) (2) (3) (C0.3) (7) (6) 6-0.60±0.15 4-0.65±0.10 2-0.50±0.10 (5) (4) (0.40) 6-0.50±0.15 Pin 2-0.50±0.10 Marking : Laser Printing ∗ : EIAJ Code 4-0.50±0.10 (0.40) R0.12 4-0.35±0.05 2-0.70±0.05 (10) 8-0.40±0.05 (C0.15) (1) (2) (3) (4) 2-0.35±0.05 4-1.50±0.15 Marking : Laser Printing ∗ : EIAJ Code Pin (1) : Input (Low-ch) (3) : Input (High-ch) (7) : Output (Low-ch) (5) : Output (High-ch) Others : Ground (in mm) !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.12.25 Filters for Communication Equipment Part Number Center Frequency (MHz) Insertion Loss (dB) Ripple (dB max.) VSWR Input Impedance Output Impedance SAWES881MCU2F00(881.5) 881.5 2.1 max. (869MHz~894MHz) 1.0 (869MHz~894MHz) 1.9max. (869MHz~894MHz) 50ohm 150ohm//68nH SAWES881MCU2F00(1960) 1960 3 max. (1930MHz~1990MHz) 1.9 (1930MHz~1990MHz) 2.4max. (1930MHz~1990MHz) 50ohm 150ohm//22nH SAWSP881MGA0T00(881.5) 881.5 2.9 max. (869MHz~894MHz) 1.5 (869MHz~894MHz) 2max. (869MHz~894MHz) 50ohm 50ohm SAWSP881MGA0T00(1960) 1960 3.2 max. (1930MHz~1990MHz) 2 (1930MHz~1990MHz) 2.4max. (1930MHz~1990MHz) 50ohm 50ohm SAWSU881MCQ0T01(881.5) 881.5 3 max. (869MHz~894MHz) 1.8 (869MHz~894MHz) 2max. (869MHz~894MHz) 50ohm 200ohm//56nH SAWSU881MCQ0T01(1960) 1960 3 max. (1930MHz~1990MHz) 2.4 (1930MHz~1990MHz) 2.2max. (1930MHz~1990MHz) 50ohm 200ohm//15nH o GSM900 (0.05) (5) (4) 2-0.25±0.05 (0.075) 0.6 max. (1) : Input (3)(4) : Output Others : Ground (2) (3) 2-0.35±0.05 5-0.45±0.05 Marking : Laser Printing ∗ : EIAJ Code Marking : Laser Printing ∗ : EIAJ Code (1) SAFED942MFM0F00 (0.075) 5-0.25±0.05 2-0.25±0.05 (0.20) 2-0.325±0.050 (in mm) (5) (4) (1) : Input (3)(4) : Output Others : Ground 7 5-0.40±0.05 2-0.325±0.050 (in mm) Center Frequency (MHz) Insertion Loss (dB) Ripple (dB max.) VSWR Input Impedance Output Impedance SAFEB942MFL0F00 942.5 2.7 max. (925MHz~960MHz) 1.7 (925MHz~960MHz) 2max. (925MHz~960MHz) 50ohm 150ohm//82nH SAFED942MFM0F00 942.5 2.2 max. (925MHz~960MHz) 1.3 (925MHz~960MHz) 2.1max. (925MHz~960MHz) 50ohm 150ohm//82nH SAFEH942MFN0F00 942.5 2.7 max. (925MHz~960MHz) 1.8 (925MHz~960MHz) 2max. (925MHz~960MHz) 50ohm 150ohm//82nH SAFEF942MAL0F00 942.5 3 max. (925MHz~960MHz) 1.7 (925MHz~960MHz) 2.1max. (925MHz~960MHz) 50ohm 50ohm SAFSD942MFM0T00 942.5 3.2 max. (925MHz~960MHz) 2.2 (925MHz~960MHz) 2.3max. (925MHz~960MHz) 50ohm 200ohm//82nH SAFSD942MCL0T00 942.5 3.3 max. (925MHz~960MHz) 1.8 (925MHz~960MHz) 2max. (925MHz~960MHz) 50ohm 50ohm SAFSE942MAL0T05 942.5 3.2 max. (925MHz~960MHz) 2 (925MHz~960MHz) 2.2max. (925MHz~960MHz) 50ohm 50ohm Part Number !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Filters for Communication Equipment 1.05±0.05 (0.075) 2-0.25±0.05 5-0.325±0.050 (2) (3) ∗ (0.20) 0.6 max. ∗ (1) SAFEB942MFL0F00 Dot Marking (ø0.3) 1.4±0.1 2.0±0.1 1.35±0.05 Dot Marking (ø0.3) 06.12.25 Filters for Communication Equipment o GSM900/GSM1800 Dual Band 2.0±0.1 M ∗ Filters for Communication Equipment 7 (0.075) (9) (8) (7) (6) 6-0.27±0.05 8-0.26±0.05 Marking : Laser Printing ∗ : EIAJ Code (1) : Input (4) : Input (8)(9) : Output (6)(7) : Output Others : Ground (C0.15) (1) (2) (3) (4) SAWES942MCQ0F00(942.5) 2-0.70±0.05 (10) 8-0.325±0.050 8-0.40±0.05 (0.075) (5) 4-0.27±0.05 SAWEP942MCN0F00(942.5) 2-0.26±0.05 0.65±0.05 (C0.15) (10) 8-0.325±0.050 (1) (2) (3) (4) (5) Marking : Laser Printing ∗ : EIAJ Code 4-0.35±0.05 (0.20) 0.6 max. 0.45±0.05 (0.2) 0.6 max. Dot Marking (ø0.3) 2-0.35±0.05 ∗ 2.0±0.1 2.5±0.1 1.6±0.1 Dot Marking (ø0.3) Pin (1) : Input (4) : Input (8)(9) : Output (6)(7) : Output Others : Ground (9) (8) (7) (6) 6-0.35±0.05 (in mm) (in mm) Part Number Center Frequency (MHz) Insertion Loss (dB) Ripple (dB max.) VSWR Input Impedance Output Impedance SAWEP942MCN0F00(942.5) 942.5 2.3 max. (925MHz~960MHz) 1.3 (925MHz~960MHz) 2.1max. (925MHz~960MHz) 50ohm 150ohm//82nH SAWEP942MCN0F00(1842.5) 1842.5 2.2 max. (1805MHz~1880MHz) 1.2 (1805MHz~1880MHz) 2.2max. (1805MHz~1880MHz) 50ohm 150ohm//15nH SAWES942MCQ0F00(942.5) 942.5 2.9 max. (925MHz~960MHz) 1.7 (925MHz~960MHz) 2.2max. (925MHz~960MHz) 50ohm 150ohm//56nH SAWES942MCQ0F00(1842.5) 1842.5 2.6 max. (1805MHz~1880MHz) 1.7 (1805MHz~1880MHz) 2.4max. (1805MHz~1880MHz) 50ohm 150ohm//15nH SAWES942MCM0F00(942.5) 942.5 2.8 max. (925MHz~960MHz) 1.5 (925MHz~960MHz) 2max. (925MHz~960MHz) 50ohm 150ohm//56nH SAWES942MCM0F00(1842.5) 1842.5 3 max. (1805MHz~1880MHz) 1.8 (1805MHz~1880MHz) 2.2max. (1805MHz~1880MHz) 50ohm 150ohm//18nH SAWES942MCQ0F05(942.5) 942.5 2.9 max. (925MHz~960MHz) 1.7 (925MHz~960MHz) 2.2max. (925MHz~960MHz) 50ohm 150ohm//56nH SAWES942MCQ0F05(1842.5) 1842.5 2.6 max. (1805MHz~1880MHz) 1.7 (1805MHz~1880MHz) 2.4max. (1805MHz~1880MHz) 50ohm 150ohm//15nH SAWSP942MLD0T00(942.5) 942.5 3 max. (925MHz~960MHz) 2 (925MHz~960MHz) 2.5max. (925MHz~960MHz) 50ohm 50ohm SAWSP942MLD0T00(1842.5) 1842.5 3.2 max. (1805MHz~1880MHz) 2 (1805MHz~1880MHz) 2.5max. (1805MHz~1880MHz) 50ohm 50ohm SAWSU942MCS0T01(942.5) 942.5 3.2 max. (925MHz~960MHz) 2.2 (925MHz~960MHz) 2.4max. (925MHz~960MHz) 50ohm 200ohm//47nH SAWSU942MCS0T01(1842.5) 1842.5 3.2 max. (1805MHz~1880MHz) 2.2 (1805MHz~1880MHz) 2.5max. (1805MHz~1880MHz) 50ohm 200ohm//16nH o GSM1800 1.05±0.05 (0.05) 2-0.25±0.05 (5) (4) (2) (3) (1) SAFED1G84FB0F00 (0.075) 5-0.25±0.05 2-0.325±0.050 (in mm) (0.075) Marking : Laser Printing ∗ : EIAJ Code 2-0.35±0.05 0.6 max. (0.20) (1) : Input (3)(4) : Output Others : Ground 2-0.25±0.05 ∗ 5-0.45±0.05 (0.075) (2) (3) 2-0.25±0.05 5-0.325±0.050 0.6 max. ∗ (1) SAFEB1G84FA0F00 Dot Marking (ø0.3) 1.4±0.1 2.0±0.1 1.35±0.05 Dot Marking (ø0.3) (5) (4) (0.20) Marking : Laser Printing ∗ : EIAJ Code (1) : Input (3)(4) : Output Others : Ground 5-0.40±0.05 2-0.325±0.050 (in mm) !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.12.25 Filters for Communication Equipment Center Frequency (MHz) Insertion Loss (dB) Ripple (dB max.) VSWR Input Impedance Output Impedance SAFEB1G84FA0F00 1842.5 2.5 max. (1805~1880MHz) 1.5 (1805MHz~1880MHz) 2.2max. (1805MHz~1880MHz) 50ohm 150ohm//18nH SAFED1G84FB0F00 1842.5 2.0 max. (1805~1880MHz) 1.3 (1805MHz~1880MHz) 2.5max. (1805MHz~1880MHz) 50ohm 150ohm//18nH SAFEH1G84FB0F00 1842.5 2.5 max. (1805~1880MHz) 1.5 (1805MHz~1880MHz) 2.2max. (1805MHz~1880MHz) 50ohm 150ohm//18nH SAFEF1G84AA0F00 1842.5 2.8 max. (1805~1880MHz) 1.7 (1805MHz~1880MHz) 2.2max. (1805MHz~1880MHz) 50ohm 50ohm SAFSE1G84KA0T00 1842.5 3.2 max. (1805~1880MHz) 2.2 (1805MHz~1880MHz) 2.8max. (1805MHz~1880MHz) 50ohm 50ohm SAFSD1G84FA0T00 1842.5 3 max. (1805~1880MHz) 2 (1805MHz~1880MHz) 2.7max. (1805MHz~1880MHz) 50ohm 200ohm//27nH SAFSD1G84CB0T00 1842.5 3.8 max. (1805~1880MHz) 2 (1805MHz~1880MHz) 2.7max. (1805MHz~1880MHz) 50ohm 50ohm SAFCC1G74KA0T00 1747.5 4.2 max. (1710MHz~1785MHz) 2.6 (1710MHz~1785MHz) 2.5max. (1710MHz~1785MHz) 50ohm 50ohm Part Number o GSM1800/GSM1900 Dual Band 2.0±0.1 M ∗ (0.20) (0.075) (9) (8) (7) (6) 6-0.27±0.05 8-0.26±0.05 (1) (2) (3) (4) SAWES1G84CQ0F00(1960) 2-0.70±0.05 (10) 8-0.325±0.050 (5) 4-0.35±0.05 (1) : Input (4) : Input (8)(9) : Output (6)(7) : Output Others : Ground (C0.15) 8-0.40±0.05 (0.075) (5) Marking : Laser Printing ∗ : EIAJ Code (9) (8) (7) (6) 6-0.35±0.05 Marking : Laser Printing ∗ : EIAJ Code Pin (1) : Input (4) : Input (8)(9) : Output (6)(7) : Output Others : Ground (in mm) (in mm) Part Number Center Frequency (MHz) Insertion Loss (dB) Ripple (dB max.) VSWR Input Impedance Output Impedance SAWEP1G84CQ0F00(1842.5) 1842.5 2.5 max. (1805MHz~1880MHz) 1.5 (1805MHz~1880MHz) 2.2max. (1805MHz~1880MHz) 50ohm 150ohm//15nH 1960 2.6 max. (1930MHz~1990MHz) 1.8 (1930MHz~1990MHz) 2.2max. (1930MHz~1990MHz) 50ohm 150ohm//18nH 1842.5 2.6 max. (1805MHz~1880MHz) 1.7 (1805MHz~1880MHz) 2.4max. (1805MHz~1880MHz) 50ohm 150ohm//15nH 1960 3.0 max. (1930MHz~1990MHz) 1.9 (1930MHz~1990MHz) 2.4max. (1930MHz~1990MHz) 50ohm 150ohm//22nH SAWEP1G84CQ0F00(1960) SAWES1G84CQ0F00(1842.5) SAWES1G84CQ0F00(1960) !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Filters for Communication Equipment SAWEP1G84CQ0F00(1960) 2-0.26±0.05 0.65±0.05 (C0.15) (10) 7 4-0.27±0.05 (1) (2) (3) (4) 8-0.325±0.050 0.6 max. 0.45±0.05 (0.2) 0.6 max. Dot Marking (ø0.3) 2-0.35±0.05 ∗ 2.0±0.1 2.5±0.1 1.6±0.1 Dot Marking (ø0.3) 06.12.25 Filters for Communication Equipment o GSM1900 1.05±0.05 (0.05) (5) (4) 2-0.25±0.05 0.6 max. (1) : Input (3)(4) : Output Others : Ground (0.075) (2) (3) Marking : Laser Printing ∗ : EIAJ Code (1) : Input (3)(4) : Output Others : Ground (1) SAFED1G96FA0F00 (0.075) 5-0.25±0.05 (5) (4) 2-0.325±0.050 5-0.40±0.05 2-0.325±0.050 (in mm) (in mm) Center Frequency (MHz) Insertion Loss (dB) Ripple (dB max.) VSWR Input Impedance Output Impedance SAFEB1G96FA0F00 1960 2.6 max. (1930~1990MHz) 1.8 (1930MHz~1990MHz) 2.2max. (1930MHz~1990MHz) 50ohm 150ohm//27nH SAFED1G96FA0F00 1960 2.9 max. (1930~1990MHz) 1.8 (1930MHz~1990MHz) 2.4max. (1930MHz~1990MHz) 50ohm 150ohm//18nH SAFEH1G96FB0F00 1960 2.6 max. (1930~1990MHz) 1.8 (1930MHz~1990MHz) 2.2max. (1930MHz~1990MHz) 50ohm 150ohm//22nH SAFEF1G96AA0F00 1960 2.8 max. (1930~1990MHz) 1.7 (1930MHz~1990MHz) 2.4max. (1930MHz~1990MHz) 50ohm 50ohm SAFSE1G96KD0T00 1960 3 max. (1930~1990MHz) 2 (1930MHz~1990MHz) 2.5max. (1930MHz~1990MHz) 50ohm 50ohm SAFSD1G96FB0T00 1960 3 max. (1930~1990MHz) 2.4 (1930MHz~1990MHz) 2.4max. (1930MHz~1990MHz) 50ohm 200ohm//22nH Part Number o J-CDMA 1.05±0.05 (0.05) (5) (4) 2-0.25±0.05 ∗ 2-0.65±0.05 (1) (2) (3) (C0.15) SAFEF906MAM0F00 (6) (5) (4) (0.075) 4-0.363±0.050 6-0.375±0.050 5-0.25±0.05 2-0.25±0.05 (0.20) 0.6 max. (1) : Input (3)(4) : Output Others : Ground (0.075) Marking : Laser Printing ∗ : EIAJ Code (1) SAFEB911MAL0F00 M 6-0.40±0.05 (0.075) 2-0.25±0.05 (2) (3) Dot Marking (ø0.3) (0.20) 0.6 max. ∗ 1.6±0.1 2.0±0.1 1.35±0.05 Dot Marking (ø0.3) 5-0.325±0.050 Filters for Communication Equipment (0.20) 2-0.35±0.05 Marking : Laser Printing ∗ : EIAJ Code 2-0.25±0.05 7 5-0.45±0.05 (0.075) 2-0.25±0.05 5-0.325±0.050 (2) (3) ∗ (0.20) 0.6 max. ∗ (1) SAFEB1G96FA0F00 Dot Marking (ø0.3) 1.4±0.1 2.0±0.1 1.35±0.05 Dot Marking (ø0.3) (in mm) Marking : Laser Printing ∗ : EIAJ Code (2) : Input (4)(6) : Output Others : Ground (in mm) Center Frequency (MHz) Insertion Loss (dB) Ripple (dB max.) VSWR Input Impedance Output Impedance SAFEB911MAL0F00 911.5 2.2 max. (898MHz~925MHz) 1.2 (898MHz~925MHz) 2.0max. (898MHz~925MHz) 50ohm 50ohm SAFEB856MCM0F00 856.5 2.2 max. (843MHz~870MHz) 1.2 (843MHz~870MHz) 2.0max. (843MHz~870MHz) 50ohm 100ohm SAFEF906MAM0F00 906 3.2 max. (887MHz~925MHz) 1.5 (887MHz~925MHz) 2.4max. (887MHz~925MHz) 50ohm 50ohm SAFSE906MAM0T00 906 4 max. (887MHz~925MHz) 2.5 (887MHz~925MHz) 2.4max. (887MHz~925MHz) 50ohm 50ohm SAFSE851MKB0T00 851 3.4 max. (832MHz~870MHz) 2.5 (832MHz~870MHz) 2.2max. (832MHz~870MHz) 50ohm 50ohm SAFSD906MCL0T00 906 4.2 max. (887MHz~925MHz) 2.5 (887MHz~925MHz) 2.8max. (887MHz~925MHz) 50ohm 50ohm Part Number Continued on the following page. !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.12.25 Filters for Communication Equipment Continued from the preceding page. Part Number Center Frequency (MHz) Insertion Loss (dB) Ripple (dB max.) VSWR Input Impedance Output Impedance 851 2.6 max. (832MHz~870MHz) 1.9 (832MHz~870MHz) 2.7max. (832MHz~870MHz) 50ohm 100ohm//56nH SAFSD851MXA0T00 o PCS(CDMA) 2.5 ± 0.2 R4-0.15 ∗ (0.25) 4-1.25 ± 0.15 (1) (0.50) 4-0.88 ± 0.15 2-0.74 ± 0.10 Marking : Laser Printing ∗ : EIAJ Code R2-0.12 (2) (C0.3) SAFSE1G88KC0T00 2-0.74 ± 0.10 4-0.63 ± 0.15 1.0 max. M 2.0 ± 0.2 Dot Marking(ø0.4) (4) Pin (1) : Input (3) : Output Others : Ground (3) (in mm) Center Frequency (MHz) Insertion Loss (dB) Ripple (dB max.) VSWR Input Impedance Output Impedance SAFSE1G88KC0T00 1880 5 max. (1850MHz~1910MHz) 3.5 (1850MHz~1910MHz) 2.2max. (1850MHz~1910MHz) 50ohm 50ohm SAFSD1G96FL0T00 1960 4 max. (1930MHz~1990MHz) 2 (1930MHz~1990MHz) 2.1max. (1930MHz~1990MHz) 50ohm 100ohm Part Number o W-CDMA 1.05±0.05 (0.05) (5) (4) 2-0.25±0.05 0.6 max. (1) (2) (3) Marking : Laser Printing ∗ : EIAJ Code (C0.15) SAFEH2G14FA0F00 (6) (5) (4) (0.075) 4-0.363±0.050 6-0.375±0.050 5-0.25±0.05 2-0.25±0.05 (0.20) 2-0.65±0.05 (1) : Input (3)(4) : Output Others : Ground (0.075) Marking : Laser Printing ∗ : EIAJ Code (1) SAFEB2G14FA0F00 ∗ 6-0.40±0.05 (0.075) 2-0.25±0.05 5-0.325±0.050 (2) (3) M Dot Marking (ø0.3) (0.20) 0.6 max. ∗ 1.6±0.1 2.0±0.1 1.35±0.05 Dot Marking (ø0.3) (in mm) (2) : Input (4)(6) : Output Others : Ground (in mm) Center Frequency (MHz) Insertion Loss (dB) Ripple (dB max.) VSWR Input Impedance Output Impedance SAFEB2G14FA0F00 2140 2.3 max. (2110~2170MHz) 1.2 (2110MHz~2170MHz) 1.8max. (2110MHz~2170MHz) 50ohm 200ohm//27nH SAFEB1G95KA0F00 1950 2.9 max. (1920~1980MHz) 2.0 (1920MHz~1980MHz) 2max. (1920MHz~1980MHz) 50ohm 50ohm SAFEB1G95FL0F00 1950 2.6 max. (1920~1980MHz) 1.3 (1920MHz~1980MHz) 1.8max. (1920MHz~1980MHz) 200ohm//27nH 50ohm SAFEH2G14FA0F00 2140 2.3 max. (2110~2170MHz) 1.2 (2110MHz~2170MHz) 1.8max. (2110MHz~2170MHz) 50ohm 200ohm//27nH SAFEH1G95FL0F00 1950 2.8 max. (1920~1980MHz) 1.5 (1920MHz~1980MHz) 2max. (1920MHz~1980MHz) 200ohm//33nH 50ohm SAFEF1G95KA0F00 1950 3 max. (1920~1980MHz) 1.7 (1920MHz~1980MHz) 2max. (1920MHz~1980MHz) 50ohm 50ohm Part Number Filters for Communication Equipment 7 Continued on the following page. !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.12.25 Filters for Communication Equipment Continued from the preceding page. Center Frequency (MHz) Insertion Loss (dB) Ripple (dB max.) VSWR Input Impedance Output Impedance SAFZE1G95KD0F00 1950 3.2 max. (1920~1980MHz) 1.5 (1920MHz~1980MHz) 2.6max. (1920MHz~1980MHz) 50ohm 50ohm SAFZD2G14FC0F00 2140 2.7 max. (2110~2170MHz) 1.3 (2110MHz~2170MHz) 2.3max. (2110MHz~2170MHz) 50ohm 100ohm SAFSE2G14KB0T00 2140 2.7 max. (2110~2170MHz) 1.3 (2110MHz~2170MHz) 2max. (2110MHz~2170MHz) 50ohm 50ohm SAFSD2G14FA0T00 2140 2.7 max. (2110MHz~2170MHz) 1.5 (2110MHz~2170MHz) 2.2max (2110MHz~2170MHz) 50ohm 200ohm//22nH SAFSD1G95FA0T00 1950 3.2 max. (1920~1980MHz) 1.6 (1920MHz~1980MHz) 2.1max. (1920MHz~1980MHz) 200ohm//22nH 50ohm Part Number o CDMA800/TDMA800/E-AMPS/GSM850 1.05±0.05 1.35±0.05 Dot Marking (ø0.3) (0.20) (0.075) (2) (3) 2-0.25±0.05 5-0.325±0.050 0.6 max. ∗ Marking : Laser Printing ∗ : EIAJ Code (1) : Input (3)(4) : Output Others : Ground (1) SAFEB881MFM0F00 (0.05) (5) (4) 2-0.25±0.05 Filters for Communication Equipment 7 5-0.25±0.05 2-0.25±0.05 (in mm) Center Frequency (MHz) Insertion Loss (dB) Ripple (dB max.) VSWR Input Impedance Output Impedance SAFEB881MFM0F00 881.5 2.2 max. (869MHz~894MHz) 1.5 (869MHz~894MHz) 2.0max. (869MHz~894MHz) 50ohm 100ohm SAFEB836MAL0F00 836.5 2.5 max. (824MHz~849MHz) 1.8 (824MHz~849MHz) 1.9max. (824MHz~849MHz) 50ohm 50ohm SAFEF836MAL0F00 836.5 2.8 max. (824MHz~849MHz) 1.4 (824MHz~849MHz) 1.9max. (824MHz~849MHz) 50ohm 50ohm Part Number !Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.12.25